Challenges and opportunities in lactic acid bioprocess design—From economic to production aspects

Vegetable substrates as an alternative for the inclusion of lactic acid bacteria with probiotic potential in food matrices

Vegetable substrates are food matrices with micronutrients, antioxidants, and fiber content with a high potential for bioprocesses development. In addition, they have been recognized as essential sources of a wide range of phytochemicals that, individually or in combination, can act as bioactive compounds with potential benefits to health due to their antioxidant and antimicrobial activity and recently due to their status as prebiotics in the balance of the human intestinal microbiota. This systematic review explores the benefits of lactic fermentation of plant matrices such as fruits, vegetables, legumes, and cereals by bacteria with probiotic potential, guaranteeing cell viability (106-107 CFU/mL) and generating bioactive metabolic products for modulation of the gut microbiome.

Third-generation D-lactic acid production using red macroalgae Gelidium amansii by co-fermentation of galactose, glucose and xylose

Macroalgae biomass has been considered as a promising renewable feedstock for lactic acid production owing to its lignin-free, high carbohydrate content and high productivity. Herein, the D-lactic acid production from red macroalgae Gelidium amansii by Pediococcus acidilactici was investigated. The fermentable sugars in G. amansii acid-prehydrolysate were mainly galactose and glucose with a small amounts of xylose. P. acidilactici could simultaneously ferment the mixed sugars of galactose, glucose and xylose into D-lactic acid at high yield (0.90 g/g), without carbon catabolite repression (CCR). The assimilating pathways of these sugars in P. acidilactici were proposed based on the whole genome sequences. Simultaneous saccharification and co-fermentation (SSCF) of the pretreated and biodetoxified G. amansii was also conducted, a record high of D-lactic acid (41.4 g/L) from macroalgae biomass with the yield of 0.34 g/g dry feedstock was achieved. This study provided an important biorefinery strain for D-lactic acid production from macroalgae biomass.

Eco-Friendly Approach for the Recovery of Lactic Acid by Complex Extraction

To meet the growing demand for high-purity lactic acid (LA) for biocompatible and biodegradable polymers, LA recovery by green techniques has been attracting the attention. This study focuses on the evaluation of vegetable oils as organic phase diluents in complex extraction of LA with an aliphatic tertiary amine extractant, trioctylamine (TOA). Eight vegetable oils were tested, and their performances were evaluated individually and compared with those obtained using 1-octanol. Extraction yields with these oils were similar; however, efficiencies with safflower oil (SFO) were slightly higher than those obtained with other oils tested. Efficiency with SFO + TOA varied inversely with temperature and pH; however, it increased with higher LA and TOA concentrations. Within the ranges of parameters investigated, the highest yield in SFO was 66% and was achieved at the highest TOA (1.0 M) and LA (1.5 M) concentrations. The efficiency obtained in 1-octanol under the identical conditions was 76%. Thus, the yields obtained with SFO + TOA and 1-octanol + TOA were comparable under most of the conditions tested, especially at the higher LA concentrations, which is preferred for commercial production. Following that, >99% of the LA was transferred from the organic phase to the (second) aqueous phase using NaOH (1.0 M) as a stripping agent. The organic phase was tested in subsequent extractions, and yields comparable to those obtained in the first uses were achieved. This study demonstrated that vegetable oils have the potential to be used as organic phase diluents during complex extraction of LA.

Development of a hybrid bio-purification process of lactic acid solutions employing an engineered E. coli strain in a membrane bioreactor

BACKGROUND

A potential alternative to lactic acid production through sugar fermentation is its recovery from grass silage leachate. The separation and purification of lactic acid from fermentation broths remain a key issue, as it amounts to up to 80% of its industrial production cost. In this study, a genetically engineered E. coli strain (A1:ldhA), that cannot catabolize lactic acid, has been used to selectively remove impurities from a synthetic medium comprising typical components (i.e., glucose and acetic acid) of green grass silage leachate. A systematic approach has been followed to provide a proof-of-concept for a bio-purification process of lactic acid solutions in a membrane bioreactor operating in semi-continuous mode.

RESULTS

The synthetic medium composition was initially optimized in shake-flasks experiments, followed by scale-up in bench-scale bioreactor. Complete (i.e., 100%) and 60.4% removal for glucose and acetic acid, respectively, has been achieved in batch bioreactor experiments with a synthetic medium comprising 0.5 g/L glucose and 0.5 g/L acetic acid as carbon sources, and 10 g/L lactic acid; no lactic acid catabolism was observed in all batch fermentation tests. Afterwards, a hybrid biotechnological process combining semi-continuous bioreactor fermentation and ultrafiltration membrane separation (membrane bioreactor) was applied to in-situ separate purified medium from the active cells. The process was assessed under different semi-continuous operating conditions, resulting in a bacteria-free effluent and 100% glucose and acetic acid depletion, with no lactic acid catabolism, thus increasing the purity of the synthetic lactic acid solution.

CONCLUSIONS

The study clearly demonstrated that a bio-purification process for lactic acid employing the engineered E. coli strain cultivated in a membrane bioreactor is a technically feasible concept, paving the way for further technological advancement.

Utilization of coffee waste as a sustainable feedstock for high-yield lactic acid production through microbial fermentation

Lactic acid is an important industrial precursor; however, high substrate costs are a major challenge in microbial fermentation-based lactic acid production. Coffee waste is a sustainable feedstock alternative for lactic acid production via microbial fermentation. Herein, the feasibility of coffee waste as a feedstock was explored by employing appropriate pretreatment methods and optimizing enzyme combinations. Coffee waste pretreatment with hydrogen peroxide and acetic acid along with a combination of Viscozyme L, Celluclast 1.5 L, and Pectinex Ultra SP-L achieved the 78.9 % sugar conversion rate at a substrate concentration of 4 % (w/v). Lactiplantibacillus plantarum WiKim0126-induced fermentation with a 4 % solid loading yielded a lactic acid concentration of 22.8 g/L (99.6 % of the theoretical maximum yield) and productivity of 0.95 g/L/h within 24 h. These findings highlight the viability of coffee waste as an eco-friendly resource for sustainable lactic acid production.

Exclusive D-lactate-isomer production during a reactor-microbiome conversion of lactose-rich waste by controlling pH and temperature

Lactate is among the top-ten-biobased products. It occurs naturally as D- or L-isomer and as a racemic mixture (DL-lactate). Generally, lactate with a high optical purity is more valuable. In searching for suitable renewable feedstocks for lactate production, unutilized organic waste streams are increasingly coming into focus. Here, we investigated acid whey, which is a lactose-rich byproduct of yogurt production, that represents a considerable environmental footprint for the dairy industry. We investigated the steering of the lactate-isomer composition in a continuous and open culture system (HRT = 0.6 d) at different pH values (pH 5.0 vs. pH 6.5) and process temperatures (38°C to 50°C). The process startup was achieved by autoinoculation. At a pH of 5.0 and a temperature of 47°C-50°C, exclusive D-lactate production occurred because of the dominance of Lactobacillus spp. (> 95% of relative abundance). The highest volumetric D-lactate production rate of 722 ± 94.6 mmol C L-1 d-1 (0.90 ± 0.12 g L-1 h-1), yielding 0.93 ± 0.15 mmol C mmol C-1, was achieved at a pH of 5.0 and a temperature of 44°C (n = 18). At a pH of 6.5 and a temperature of 44°C, we found a mixture of DL-lactate (average D-to-L-lactate production rate ratio of 1.69 ± 0.90), which correlated with a high abundance of Streptococcus spp. and Enterococcus spp. However, exclusive L-lactate production could not be achieved. Our results show that for the continuous conversion of lactose-rich dairy waste streams, the pH was a critical process parameter to control the yield of lactate isomers by influencing the composition of the microbiota. In contrast, temperature adjustments allowed the improvement of bioprocess kinetics.

Emerging trends in biomaterials for sustainable food packaging: A comprehensive review

This comprehensive review investigates a variety of creative approaches in the field of sustainable food packaging biomaterials in response to growing environmental concerns and the negative effects of traditional plastic packaging. The study carefully looks at new developments in biomaterials, such as biodegradable polymers, ceramics, composites, and metal alloys, in response to the growing need for environmentally suitable substitutes. It highlights how they might replace conventional plastic packaging and lessen environmental damage. Moreover, the incorporation of nanotechnology into packaging is closely examined due to its crucial function in improving barrier qualities, introducing antimicrobial properties, and introducing smart packaging features. The investigation includes edible coatings and films made of biodegradable polymers that offer new sensory experiences in addition to prolonging the shelf life of products. The review emphasizes the use of biomaterials derived from food processing and agricultural waste, supporting environmentally responsible methods of producing materials while simultaneously using less resources and waste. As a strong defense against plastic pollution, the report highlights the food industry's increasing use of recyclable and biodegradable packaging, which is in line with the concepts of the circular economy. A movement in consumer tastes and regulatory pressures toward sustainable food packaging is evident in global market patterns. Notwithstanding these encouraging trends, there are still issues to be resolved, including cost-effectiveness, technological constraints, and the scalability of biomaterial production. This thorough analysis concludes by highlighting the critical role biomaterials have played in guiding the food industry toward sustainability and emphasizing the need for ongoing research and development to adequately address environmental issues on a worldwide scale and satisfy the growing demand for environmentally friendly packaging options. Biomaterials show great promise as catalysts for the food industry's transition to a sustainable future.

Feasibility of bioplastic production using micro- and macroalgae- A review

Plastic disposal and their degraded products in the environment are global concern due to its adverse effects and persistence in nature. To overcome plastic pollution and its impacts on environment, a sustainable bioplastic production using renewable feedstock's, such as algae, are envisioned. In this review, the production of polymer precursors such as polylactic acid, polyhydroxybutyrates, polyhydroxyalkanoates, agar, carrageenan and alginate from microalgae and macroalgae through direct conversion and fermentation routes are summarized and discussed. The direct conversion of algal biopolymers without any bioprocess (whole algal biomass used emphasizing zero waste discharge concept) favours economic feasibility. Whereas indirect method uses conversion of algal polymers to monomers after pretreatment followed by bioplastic precursor production by fermentation are emphasized. This review paper also outlines the current state of technological developments in the field of algae-based bioplastic, both in industry and in research, and highlights the creation of novel solutions for green bioplastic production employing algal polymers. Finally, the cost economics of the bioplastic production using algal biopolymers are clearly mentioned with future directions of next level bioplastic production. In this review study, the cost estimation was given at laboratory level bioplastic production using casting methods. Further development of bioplastics at pilot scale level may give clear economic feasibility of production at industry. Here, in this review, we emphasized the overview of algal biopolymers for different bioplastic product development and its economic value and also current industries involved in bioplastic production.

Global Research Trends on the Utilization of Nopal (Opuntia Sp) Cladodes as a Functional Ingredient for Industrial Use

Although nopal cladodes are a valuable bioactive compound source, they have historically been underused. This review draws a parallel between quantitative and qualitative data from the most outstanding scientific research concerning nopal cladodes in the last five years by implementing a bibliometric analysis. Italy, Mexico, Brazil, and Morocco accounted for approximately 55% of the 111 articles selected for this review. Nopal cladodes are a great source of nourishing ingredients such as mucilage, pectin, insoluble fibers, minerals, ascorbic acid, and bioactive compounds such as carotenoids (e.g., β-carotene, lutein, and cryptoxanthin), flavonoids (e.g., isorhamnetin, quercetin, rutin, and catechin), phytosterols (e.g., β-sitosterol and β-campesterol). Additionally, they offer technological benefits as a food ingredient, allied to good sensory acceptability. The findings suggest that medium-aged cladodes (20 days) have the highest concentration of soluble fiber, protein, and bioactive compounds, rendering them the optimal maturity stage for consumption and processing. Therefore, nopal cladodes can be exploited for several industries, including biotechnology, cosmetics, and pharmaceuticals, and they have attracted attention as a promising ingredient for the food industry in the concept of the next generation of innovative and functional vegetable foods.

Use of copper-functionalized cotton waste in combined chemical and biological processes for production of valuable chemical compounds

Cotton textiles modified with copper compounds have a documented mechanism of antimicrobial action against bacteria, fungi, and viruses. During the COVID-19 pandemic, there was pronounced interest in finding new solutions for textile engineering, using modifiers and bioactive methods of functionalization, including introducing copper nanoparticles and complexes into textile products (e.g. masks, special clothing, surface coverings, or tents). However, copper can be toxic, depending on its form and concentration. Functionalized waste may present a risk to the environment if not managed correctly. Here, we present a model for managing copper-modified cotton textile waste. The process includes pressure and temperature-assisted hydrolysis and use of the hydrolysates as a source of sugars for cultivating yeast and lactic acid bacteria biomass as valuable chemical compounds.

Development of a Novel D-Lactic Acid Production Platform Based on Lactobacillus saerimneri TBRC 5746

D-Lactic acid is a chiral, three-carbon organic acid, that bolsters the thermostability of polylactic acid. In this study, we developed a microbial production platform for the high-titer production of D-lactic acid. We screened 600 isolates of lactic acid bacteria (LAB) and identified twelve strains that exclusively produced D-lactic acid in high titers. Of these strains, Lactobacillus saerimneri TBRC 5746 was selected for further development because of its homofermentative metabolism. We investigated the effects of high temperature and the use of cheap, renewable carbon sources on lactic acid production and observed a titer of 99.4 g/L and a yield of 0.90 g/g glucose (90% of the theoretical yield). However, we also observed L-lactic acid production, which reduced the product's optical purity. We then used CRISPR/dCas9-assisted transcriptional repression to repress the two Lldh genes in the genome of L. saerimneri TBRC 5746, resulting in a 38% increase in D-lactic acid production and an improvement in optical purity. This is the first demonstration of CRISPR/dCas9-assisted transcriptional repression in this microbial host and represents progress toward efficient microbial production of D-lactic acid.

Saccharina latissima, candy-factory waste, and digestate from full-scale biogas plant as alternative carbohydrate and nutrient sources for lactic acid production

To substitute petroleum-based materials with bio-based alternatives, microbial fermentation combined with inexpensive biomass is suggested. In this study Saccharina latissima hydrolysate, candy-factory waste, and digestate from full-scale biogas plant were explored as substrates for lactic acid production. The lactic acid bacteria Enterococcus faecium, Lactobacillus plantarum, and Pediococcus pentosaceus were tested as starter cultures. Sugars released from seaweed hydrolysate and candy-waste were successfully utilized by the studied bacterial strains. Additionally, seaweed hydrolysate and digestate served as nutrient supplements supporting microbial fermentation. According to the highest achieved relative lactic acid production, a scaled-up co-fermentation of candy-waste and digestate was performed. Lactic acid reached a concentration of 65.65 g/L, with 61.69% relative lactic acid production, and 1.37 g/L/hour productivity. The findings indicate that lactic acid can be successfully produced from low-cost industrial residues.

Efficient production of lactic acid from cellulose and xylan in sugarcane bagasse by newly isolated Lactiplantibacillus plantarum and Levilactobacillus brevis through simultaneous saccharification and co-fermentation process

Sugarcane bagasse is one of the promising lignocellulosic feedstocks for bio-based chemicals production. However, to date, most research focuses mainly on the cellulose conversion process, while hemicellulose remains largely underutilized. The conversion of glucose and xylose derived from lignocellulosic biomass can be a promising strategy to improve utilization efficiencies of resources, energy, and water, and at the same time reduce wastes generated from the process. Here, attempts were made to convert cellulose and xylan in sugarcane bagasse (SB) into lactic acid (LA) through a pre-hydrolysis and simultaneous saccharification and co-fermentation (SScF) process using newly isolated Lactiplantibacillus plantarum TSKKU P-8 and Levilactobacillus brevis CHKKU N-6. The process yielded 91.9 g/L of LA, with a volumetric productivity of 0.85 g/(L·h). This was equivalent to 137.8 ± 3.4 g-LA, a yield on substrate (pretreated SB) of 0.86 g/g, and a productivity of 1.28 g/h, based on a final volume of 1.5 L. On the other hand, pre-hydrolysis and simultaneous saccharification and fermentation (SSF) process using La. plantarum TSKKU P-8 as a monoculture gave 86.7 ± 0.2 g/L of LA and a volumetric productivity of 0.8 g/(L·h), which were equivalent to 104.8 ± 0.3 g-LA, a yield on substrate of 0.65 g/g, and a productivity of 0.97 g/h, based on a final volume of 1.2 L. Mass balance calculated based on mass of raw SB entering the process showed that the SScF process improved the product yield by 32% as compared with SSF process, resulting in 14% improvement in medium-based economic yield.

Lactic acid production from food waste at an anaerobic digestion biorefinery: effect of digestate recirculation and sucrose supplementation

Low lactic acid (LA) yields from direct food waste (FW) fermentation restrict this production pathway. However, nitrogen and other nutrients within FW digestate, in combination with sucrose supplementation, may enhance LA production and improve feasibility of fermentation. Therefore, this work aimed to improve LA fermentation from FWs by supplementing nitrogen (0-400 mgN·L^-1) as NH₄Cl or digestate and dosing sucrose (0-150 g·L^-1) as a low-cost carbohydrate. Overall, NH₄Cl and digestate led to similar improvements in the rate of LA formation (0.03 ± 0.02 and 0.04 ± 0.02 h^-1 for NH₄Cl and digestate, respectively), but NH₄Cl also improved the final concentration, though effects varied between treatments (5.2 ± 4.6 g·L^-1). While digestate altered the community composition and increased diversity, sucrose minimised community diversion from LA, promoted Lactobacillus growth at all dosages, and enhanced the final LA concentration from 25 to 30 g·L^-1 to 59-68 g·L^-1, depending on nitrogen dosage and source. Overall, the results highlighted the value of digestate as a nutrient source and sucrose as both community controller and means to enhance the LA concentration in future LA biorefinery concepts.

A review on biodegradable polylactic acid (PLA) production from fermentative food waste - Its applications and degradation

Due to its low carbon footprint and environmental friendliness, polylactic acid (PLA) is one of the most widely produced bioplastics in the world. Manufacturing attempts to partially replace petrochemical plastics with PLA are growing year over year. Although this polymer is typically used in high-end applications, its use will increase only if it can be produced at the lowest cost. As a result, food wastes rich in carbohydrates can be used as the primary raw material for the production of PLA. Lactic acid (LA) is typically produced through biological fermentation, but a suitable downstream separation process with low production costs and high product purity is also essential. The global PLA market has been steadily expanding with the increased demand, and PLA has now become the most widely used biopolymer across a range of industries, including packaging, agriculture, and transportation. Therefore, the necessity for an efficient manufacturing method with reduced production costs and a vital separation method is paramount. The primary goal of this study is to examine the various methods of lactic acid synthesis, together with their characteristics and the metabolic processes involved in producing lactic acid from food waste. In addition, the synthesis of PLA, possible difficulties in its biodegradation, and its application in diverse industries have also been discussed.

Reactive extraction of lactic and acetic acids from leached bed reactor leachate and process optimization by response surface methodology

The present work focused on extracting lactic and acetic acids from the leachate collected from leached bed reactor (LBR) during acidogenesis of food waste using the reactive extraction (RE) process. A wide range of diluents was screened either alone by physical extraction (PE) or in combination with extractants using RE to extract acids from the VFA mix. Aliquat 336-Butyl acetate/MIBK extractants in RE demonstrated higher distribution coefficients (k) and extraction yield (E %) than PE. The response surface methodology (RSM) was used to optimize the extraction of lactic and acetic acids from the synthetic acid mix, using three variables (extractant concentrations, solute/acid concentration and time). Consequently, these three variables were optimized for LBR leachate. The RE was promising, and extraction efficiencies of 65% (lactate), 75% (acetate), 86.2% (propionate) and almost 100% for butyrate and medium-chain fatty acids (MCFA) were achieved after 16 h of extraction. The RSM optimization predicted a maximum E % of 59.60% and 34.67% for lactate and acetate in 5.5 and 1.17 min, respectively. In the leachate experiment, an increase in E% and k was observed with increasing extractant concentration and lactate and acetate concentrations over time. Using a 1M reactive extractant mix and 1.25 and 12 g/L of solute concentrations, the maximum E % of acetate and lactate were 38.66% and 61.8% in 10 min. The results could contribute to developing a rapid in-situ product recovery system integrated with food waste acidogenesis for lactate and acetate recovery, contributing to the bio-economy.

Effect of thermal and ultrasonic pretreatment on lactic acid fermentation of food waste

Food waste (FW) generation has become one of the largest environmental concerns for human society. Thanks to its chemical features and its high biodegradability, FW can be used as starting platform to produce biocommodities. Lactic acid (LA) is one of those chemicals that is gaining the attention of industry and research for its important role in polylactic acids production. To exploit better the organic content of FW, several FW pretreatments have been proposed in the literature, though none of them were aimed at influencing LA fermentation. Thermal and ultrasonic pretreatment effects on solubilization rates and LA production yields have been investigated in this batch study. The highest solubilization rate was achieved with 30 minutes ultrasonic pretreated FW resulting in a 15% increment in soluble COD (sCOD). The highest LA yield was obtained after 90-minute thermal pretreatment at 80 and 100°C at a yield of 0.49 g LA•g COD^-1. This study shows that ultrasonic pretreatment generally performed better than thermal pretreatment when considering the increase in sCOD but caused a reduction in LA concentrations and yields after fermentation with high production of ethanol. The opposite trend was recorded in the thermal pretreated incubations, in which LA was present for 50% of the sCOD with higher LA concentrations of 2.90 g COD•L^-1.

Enhanced cellulosic d-lactic acid production from sugarcane bagasse by pre-fermentation of water-soluble carbohydrates before acid pretreatment

After several rounds of milling process for sugars extraction from sugarcane, certain amounts of water-soluble carbohydrates (WSC) still remain in sugarcane bagasse. It is a bottleneck to utilize WSC in sugarcane bagasse biorefinery, since these sugars are easily degraded into inhibitors during pretreatment. Herein, a simple pre-fermentation step before pretreatment was conducted, and 98 % of WSC in bagasse was fermented into d-lactic acid. The obtained d-lactic acid was stably preserved in bagasse and 5-hydroxymethylfurfural (HMF) generation was sharply reduced from 46.0 mg/g to 6.2 mg/g of dry bagasse, after dilute acid pretreatment. Consequently, a higher d-lactic acid titer (57.0 g/L vs 33.2 g/L) was achieved from the whole slurry of the undetoxified and pretreated sugarcane bagasse by one-pot simultaneous saccharification and co-fermentation (SSCF), with the overall yield of 0.58 g/g dry bagasse. This study gave an efficient strategy for enhancing lactic acid production using the lignocellulosic waste from sugar industry.

Metabolic engineering of Zymomonas mobilis for co-production of D-lactic acid and ethanol using waste feedstocks of molasses and corncob residue hydrolysate

Lactate is the precursor for polylactide. In this study, a lactate producer of Z. mobilis was constructed by replacing ZMO0038 with LmldhA gene driven by a strong promoter PadhB, replacing ZMO1650 with native pdc gene driven by Ptet, and replacing native pdc with another copy of LmldhA driven by PadhB to divert carbon from ethanol to D-lactate. The resultant strain ZML-pdc-ldh produced 13.8 ± 0.2 g/L lactate and 16.9 ± 0.3 g/L ethanol using 48 g/L glucose. Lactate production of ZML-pdc-ldh was further investigated after fermentation optimization in pH-controlled fermenters. ZML-pdc-ldh produced 24.2 ± 0.6 g/L lactate and 12.9 ± 0.8 g/L ethanol as well as 36.2 ± 1.0 g/L lactate and 40.3 ± 0.3 g/L ethanol, resulting in total carbon conversion rate of 98.3% ± 2.5% and 96.2% ± 0.1% with final product productivity of 1.9 ± 0.0 g/L/h and 2.2 ± 0.0 g/L/h in RMG5 and RMG12, respectively. Moreover, ZML-pdc-ldh produced 32.9 ± 0.1 g/L D-lactate and 27.7 ± 0.2 g/L ethanol as well as 42.8 ± 0.0 g/L D-lactate and 53.1 ± 0.7 g/L ethanol with 97.1% ± 0.0% and 99.1% ± 0.8% carbon conversion rate using 20% molasses or corncob residue hydrolysate, respectively. Our study thus demonstrated that it is effective for lactate production by fermentation condition optimization and metabolic engineering to strengthen heterologous ldh expression while reducing the native ethanol production pathway. The capability of recombinant lactate-producer of Z. mobilis for efficient waste feedstock conversion makes it a promising biorefinery platform for carbon-neutral biochemical production.

The Application of the Nanofiltration Membrane NF270 for Separation of Fermentation Broths

The potential for nanofiltration (NF) in removing both relatively low molecular weight (MW) organic species and charged solutes from complex media is noteworthy. The main aim of the current work was to improve understanding of the separation mechanisms of fermentation broths components in the NF process. For this purpose, the experimental investigations were performed using the commercial polyamide NF270 membrane. The feed solution was ultrafiltered 1,3-propanediol (1,3-PD) broths. The separation results were analyzed and discussed in light of the detailed characteristics of both the membrane and the broth components. It has been noted that the membrane ensured the complete 1,3-PD permeability and significant rejection of some feed components. A thorough analysis showed that the retention of carboxylic acids was based on both the Donnan effect and sieve mechanism, according to the following order: succinic acid > lactic acid > acetic acid > formic acid. Indeed, acids retention increased with increasing charged acids ions valency, Stokes radius (rS) as well as MW, and decreasing diffusion coefficient (D). In turn, for ions, the following orders retention was determined: SO42− = PO43− > Cl− and Ca2+ > Na+ > NH4+ ~ K+. It indicated that the ions retention increased with increasing ions charge density, hydrated radius (rH), and hydration energy (Eh). It showed that the separation of the ions was based on the Donnan exclusion, sieving effect, and dielectric exclusion.

One-pot d-lactic acid production using undetoxified acid-pretreated corncob slurry by an adapted Pediococcus acidilactici

Inhibitor tolerance is still a bottleneck for lactic acid bacteria in lignocellulose biorefinery, while it is hard to obtain one engineered strain with strong tolerance to all inhibitors. Herein, a robust adapted d-lactic acid producing strain Pediococcus acidilactici XH11 was obtained by 111 days' long-term adaptive evolution in undetoxified corncob prehydrolysates. The adapted strain had higher inhibitors tolerance compared to the parental strain, primarily due to its increased conversion capacities of four typical aldehyde inhibitors (furfural, HMF, vanillin, and 4-hydroxybenzaldehyde). One-pot simultaneous saccharification and co-fermentation was successfully achieved using the whole slurry of acid-pretreated corncob without solid-liquid separation and detoxification, by applying the adapted P. acidilactici XH11. Finally, 61.9 g/L of d-lactic acid was generated after 96 h' fermentation (xylose conversion of 89.9 %) with the overall yield of 0.48 g/g dry corncob. This study gave an important option for screening of industrial strains in cellulosic lactic acid production processes.

Effect of pH dynamic control on ethanol-lactic type fermentation (ELTF) performance of glucose

This study proposed a new ethanol-lactic type fermentation (ELTF) and explored the optimal control strategy. Using batch experiments, the effects of pH, temperature and organic loading (OL) on ELTF were investigated. The sum of ethanol and lactic acid yield was highest at whole-control pH value of 4.0, 35°C temperature and OL of 33 gCOD/L. To improve ELTF, the dynamic pH control in the long-term CSTR was adjusted at 4.0 (1-28 days), 5.0 (29-44 days) and 4.0 (46-62 days) successively. The high concentration of ethanol and lactic acid was 8190.5 mg/L at 16th day of pH 4.0. At pH of 5.0, the average acidogenesis rate and total concentration of fermentation products increased 111.0% and 128.0%, respectively. Organisms of Lactobacillus and Bifidobacterium were the predominant bacteria in reactor. It can achieve the directional regulation of ELTF and provides parameter support for the application of two-phase anaerobic digestion.

Sustainable Food Systems: The Case of Functional Compounds towards the Development of Clean Label Food Products

The addition of natural components with functional properties in novel food formulations confers one of the main challenges that the modern food industry is called to face. New EU directives and the global turn to circular economy models are also pressing the agro-industrial sector to adopt cradle-to-cradle approaches for their by-products and waste streams. This review aims to present the concept of “sustainable functional compounds”, emphasizing on some main bioactive compounds that could be recovered or biotechnologically produced from renewable resources. Herein, and in view of their efficient and “greener” production and extraction, emerging technologies, together with their possible advantages or drawbacks, are presented and discussed. Μodern examples of novel, clean label food products that are composed of sustainable functional compounds are summarized. Finally, some action plans towards the establishment of sustainable food systems are suggested.

Food Quality, Drug Safety, and Increasing Public Health Measures in Supply Chain Management

Over the last decade, there has been an increased interest in public health measures concerning food quality and drug safety in supply chains and logistics operations. Against this backdrop, this study systematically reviewed the extant literature to identify gaps in studying food quality and drug safety, the proposed solutions to these issues, and potential future research directions. This study utilized content analysis. The objectives of the review were to (1) identify the factors affecting food quality and possible solutions to improve results, (2) analyze the factors that affect drug safety and identify ways to mitigate them through proper management; and (3) establish integrated supply chains for food and drugs by implementing modern technologies, followed by one another to ensure a multi-layered cross-verification cascade and resource management at the different phases to ensure quality, safety, and sustainability for the benefit of public health. This review investigated and identified the most recent trends and technologies used for successfully integrated supply chains that can guarantee food quality and drug safety. Using appropriate keywords, 298 articles were identified, and 205 were shortlisted for the analysis. All analysis and conclusions are based on the available literature. The outcomes of this paper identify new research directions in public health and supply chain management.

Pilot Scale for Production and Purification of Lactic Acid from Ceratonia siliqua L. (Carob) Bagasse

The bioconversion of lignocellulose and organic waste bagasse to lactic acid (LA) is an important alternative process requiring valorization as a potentially viable method in the production of pure LA, to be utilized for various purposes. Carob (Ceratonia siliqua L.) biomass was used for the production of LA, using a thermophilic Bacillus coagulans isolate, cultivated in a batch pilot scale of 35 L fermenters without yeast extract supplementation, and operated for 50 h. During the fermentation process, most of the degradable sugar was consumed within 35 h and resulted in the production of 46.9 g/L LA, with a calculated LA yield of 0.72 g/g sugars and productivity at the log phase of 1.69 g/L/h. The use of LA for different industrial applications requires high purity; therefore, a downstream process (DSP) consisting of different purification stages was used, enabling us to reach up to 99.9% (w/w) product purity, which indicates that the process was very effective. The overall almost pure L-LA yield of the DSP was 56%, which indicates that a considerable amount of LA (46%) was lost during the different DSP stages. This is the first study in which carob biomass bagasse has been tested on a pilot scale for LA production, showing the industrial feasibility of the fermentation process.

Lactic acid fermentation of food waste at acidic conditions in a semicontinuous system: effect of HRT and OLR changes

Lactic acid production through fermentation is an established technology, however, improvements are necessary to reduce the process costs and to decrease its market price. Lactic acid is used in many industrial sectors and its market has increased in the last decade for its use as the raw material for polylactic acid product. Using food waste as a cheap and renewable substrate, as well as fermentation at uncontrolled pH, helps to make the production cheaper and to simplify the downstream purification process. Lactic acid production at acidic conditions and the role of varying organic loading rate (OLR) and hydraulic retention time (HRT) were tested in two different semicontinuous batch fermentation systems. Reactor performances indicated that lactic acid fermentation was still possible at pH < 3.5 and even up to a pH of 2.95. The highest lactic acid production was recorded at 14-day HRT, 2.14 g VS/L·day OLR, and pH 3.11 with a maximum lactic acid concentration of 8.72 g/L and a relative yield of 0.82 g lactate/g carbohydrates. The fermentation microbial community was dominated by Lactobacillus strains, the organism mainly responsible for lactic acid conversion from carbohydrates. This study shows that low pH fermentation is a key parameter to improve lactic acid production from food waste in a semicontinuous system. Acidic pH favored both the selection of Lactobacillus strains and inhibited VFA producers from utilizing lactic acid as primary substrate, thus promoting the accumulation of lactic acid. Finally, production yields tend to decrease with high OLR and low HRT, while lactic acid production rates showed the opposite trend.

Kluyveromyces marxianus as a microbial cell factory for lignocellulosic biomass valorisation

The non-conventional yeast Kluyveromyces marxianus is widely used for several biotechnological applications, mainly due to its thermotolerance, high growth rate, and ability to metabolise a wide range of sugars. These cell traits are strategic for lignocellulosic biomass valorisation and strain diversity prompts the development of robust chassis, either with improved tolerance to lignocellulosic inhibitors or ethanol. This review summarises bioethanol and value-added chemicals production by K. marxianus from different lignocellulosic biomasses. Moreover, metabolic engineering and process optimization strategies developed to expand K. marxianus potential are also compiled, as well as studies reporting cell mechanisms to cope with lignocellulosic-derived inhibitors. The main lignocellulosic-based products are bioethanol, representing 71% of the reports, and xylitol, representing 17% of the reports. K. marxianus also proved to be a good chassis for lactic acid and volatile compounds production from lignocellulosic biomass, although the literature on this matter is still scarce. The increasing advances in genome editing tools and process optimization strategies will widen the K. marxianus-based portfolio products.

Efficient Catalytic Conversion of Glucose into Lactic Acid over Y-β and Yb-β Zeolites

In this work, a new type of modified β zeolites with rare earth elements (ree) was discovered for producing lactic acid from glucose and achieved a good catalytic effect. At first, the catalytic performances of ree-β zeolites, ree oxides, and single-transition-metal-β zeolites were compared, and the result showed that Y-β and Yb-β zeolites had the best catalytic activity under the same reaction conditions. Under the best reaction conditions, the maximum yields of lactic acid with Y-β and Yb-β catalysts were 45.3 and 43.6%, respectively. The acid characterization showed that Y/Yb-β zeolites had a similar number of Lewis acid sites as Sn-β zeolites, and they were also more than other transition-metal-β zeolites. Thus, Y-β and Yb-β zeolites had a higher lactic acid yield than those catalysts. It is interesting to note that Y-β and Yb-β zeolites owned more Brønsted acids but produced fewer byproducts. Combining the decomposition experiment of 5-hydroxymethyl furfural, fewer byproducts were produced with Y-β and Yb-β zeolites because the low amount of Brønsted acid contained could hinder the decomposition of 5-hydroxymethyl furfural, thereby slowing down the side reaction.

Valorization of household food wastes to lactic acid production: A response surface methodology approach to optimize fermentation process

Lactic acid is a valuable compound used in several industrial processes such as polymers, emulsifiers manufacturing, pharmaceutical, and cosmetic formulations. The present study aims to evaluate the potential use of food waste to produce lactic acid through fermentation, both by indigenous microbiota and by the bio-augmentation with two lactic acid bacteria, namely Lactobacillus plantarum BS17 and Lactobacillus casei BP2. Fermentation was studied both in batch and continuously fed anaerobic reactors at mesophilic conditions and a Response Surface Methodology approach was used to optimize the bioprocess performance and determine the environmental parameters (namely pH and time) that lead to the enhancement of lactic acid production during the batch fermentation by indigenous microorganisms. Results revealed an optimum set of conditions for lactic acid production at a pH value of 6.5 and a fermentation period of 3.5 days at 37 °C. Under these conditions lactic acid production reached a value of 23.07 g/L, which was very similar to the mathematically predicted ones, thus verifying the accuracy of the experimental design. This optimum set of conditions was further employed to examine the production of lactic acid under continuous fermentation operation. Furthermore, concentrations of volatile fatty acids and ethanol were monitored and found to be relatively low, with ethanol being the dominant by-product of fermentation, indicating the presence of heterofermentative bacteria in the food wastes. A final step of downstream process was performed resulting in the successful recovery of lactic acid with purity over 90%.

Lactic acid production from food waste using a microbial consortium: Focus on key parameters for process upscaling and fermentation residues valorization

In this study, the production of lactic acid from food waste in industrially relevant conditions was investigated. Laboratory assays were first performed in batch conditions to determine the suitable operational parameters for an efficient lactic acid production. The use of compost as inoculum, the regulation of temperature at 35 °C and pH at 5 enhanced the development of Lactobacillus sp. resulting in the production of 70 g/L of lactic acid with a selectivity of 89% over the other carboxylic acids. Those parameters were then applied at pilot scale in successive fed-batch fermentations. The subsequent high concentration (68 g/L), yield (0.38 g/gTS) and selectivity (77%) in lactic acid demonstrated the applicability of the process. To integrate the process into a complete value chain, fermentation residues were then converted into biogas through anaerobic digestion. Lastly, the experiment was successfully replicated using commercial and municipal waste collected in France.

Microalgae-based bioplastics: Future solution towards mitigation of plastic wastes

Global demand for plastic materials has severely harm the environment and marine sea life. Therefore, bioplastics have emerged as an environmentally friendly alternative due to sustainability, minimal carbon footprint, less toxicity and high degradability. This review highlights the sustainable and environmentally friendly approach towards bioplastic production by utilizing microalgae as a feed source in several ways. First, the microalgae biomass obtained through the biorefinery approach can be processed into PHA under certain nutrient limitations. Additionally, microalgae biomass can act as potential filler and reinforcement towards the enhancement of bioplastic either blending with conventional bioplastic or synthetic polymer. The downstream processing of microalgae via suitable extraction and pre-treatment of bioactive compounds such as lipids and cellulose are found to be promising for the production of bioplastics. Moving on, the intermediate processing of bioplastic via lactic acid synthesized from microalgae has favoured the microwave-assisted synthesis of polylactic acid due to cost efficiency, minimum solvent usage, low energy consumption, and fast rate of reaction. Moreover, the reliability and effectiveness of microalgae-based bioplastics are further evaluated in terms of techno-economic analysis and degradation mechanism. Future improvement and recommendations are listed towards proper genetic modification of algae strains, large-scale biofilm technology, low-cost cultivation medium, and novel avocado seed-microalgae bioplastic blend.

Recoverable resources from pot ale & spent wash from Scotch Whisky production

Scotch Whisky is an important global commodity which generates extensive co-product known as pot ale or spent wash (> 10 L co-product per L whisky). Whilst this is often used as fertiliser or animal feed, a proportion requires disposal resulting in cost to the distillery along with the negative impact on the carbon footprint due to transportation. This study examined the composition of the soluble fraction of pot ale from twenty-two distilleries in Scotland in order to assess the potential for resource recovery and transition to a more circular economy. The results reinforced previous studies, demonstrating that pot ale is an excellent source of protein with a potential for recovery >150, 000 t per annum in Scotland based on Whisky production data. Lactic acid, an important industrial platform chemical, was the major organic acid produced with concentrations ranging from 0.3 to 6.6 g L ^-1, representing a potential opportunity for recovery for applications such as manufacture of biodegradable polylactic acid for plastics (> 15,000 t per annum based on mean values). Other important platform chemicals, succinic acid and lysine were also identified and considered in sufficient amounts for future use. Pot ale was also shown to contain significant amounts of critical raw materials, magnesium and phosphate, which could be reclaimed for use in fertiliser/feed supporting the development of a new circular economy whilst at the same time reducing the burden of mining and transportation on the environment. The data in this study demonstrated a potential 13.8 kt recoverable phosphate per annum representing more than half of the annual fertiliser consumption in Scotland. Whisky co-products can contribute to sustainable energy, food and platform chemicals with the added value that metal concentrations are not sufficiently high to prevent its utilisation.

Advancement of biorefinery-derived platform chemicals from macroalgae: a perspective for bioethanol and lactic acid

The extensive growth of energy and plastic demand has raised concerns over the depletion of fossil fuels. Moreover, the environmental conundrums worldwide integrated with global warming and improper plastic waste management have led to the development of sustainable and environmentally friendly biofuel (bioethanol) and biopolymer (lactic acid, LA) derived from biomass for fossil fuels replacement and biodegradable plastic production, respectively. However, the high production cost of bioethanol and LA had limited its industrial-scale production. This paper has comprehensively reviewed the potential and development of third-generation feedstock for bioethanol and LA production, including significant technological barriers to be overcome for potential commercialization purposes. Then, an insight into the state-of-the-art hydrolysis and fermentation technologies using macroalgae as feedstock is also deliberated in detail. Lastly, the sustainability aspect and perspective of macroalgae biomass are evaluated economically and environmentally using a developed cascading system associated with techno-economic analysis and life cycle assessment, which represent the highlights of this review paper. Furthermore, this review provides a conceivable picture of macroalgae-based bioethanol and lactic acid biorefinery and future research directions that can be served as an important guideline for scientists, policymakers, and industrial players.

Graphical abstract

Towards a Circular Economy of Plastics: An Evaluation of the Systematic Transition to a New Generation of Bioplastics

Plastics have become an essential part of the modern world thanks to their appealing physical and chemical properties as well as their low production cost. The most common type of polymers used for plastic account for 90% of the total production and are made from petroleum-based nonrenewable resources. Concerns over the sustainability of the current production model and the environmental implications of traditional plastics have fueled the demand for greener formulations and alternatives. In the last decade, new plastics manufactured from renewable sources and biological processes have emerged from research and have been established as a commercially viable solution with less adverse effects. Nevertheless, economic and legislative challenges for biobased plastics hinder their widespread implementation. This review summarizes the history of plastics over the last century, including the most relevant bioplastics and production methods, the environmental impact and mitigation of the adverse effects of conventional and emerging plastics, and the regulatory landscape that renewable and recyclable bioplastics face to reach a sustainable future.

Increasing Acid Tolerance of an Engineered Lactic Acid Bacterium Pediococcus acidilactici for L-Lactic Acid Production

Acid tolerance of the lactic acid bacterium (LAB) is crucially important for the production of free lactic acid as a chemical monomer by simplified purification steps. This study conducts both metabolic modification and adaptive evolution approaches on increasing the acid tolerance of an engineered Pediococcus acidilactici strain. The overexpression of the genes encoding lactate dehydrogenase, recombinase, chaperone, glutathione and ATPase did not show the observable changes in acid tolerance. On the other hand, the low pH adaptive evolution showed clear improvement. The L-lactic acid generation and cell viability of the adaptively evolved P. acidilactici were doubled at low pH up to 4.0 when wheat straw was used as carbohydrate feedstock. However, the further decrease in pH value close to the pKa (3.86) of lactic acid led to a dramatic reduction in L-lactic acid generation. This result shows a partially successful approach on improving the acid tolerance of the lactic acid bacterium P. acidilactici.

Metabolites Produced by a New Lactiplantibacillus plantarum Strain BF1-13 Isolated from Deep Seawater of Izu-Akazawa Protect the Intestinal Epithelial Barrier from the Dysfunction Induced by Hydrogen Peroxide

This study aimed to investigate the protective effect of the metabolites produced by a new Lactiplantibacillus plantarum strain BF1-13, isolated from deep seawater (DSW), on the intestinal epithelial barrier against the dysfunction induced by hydrogen peroxide (H2O2) and to elucidate the mechanism underlying the effect. Protective effect of the metabolites by strain BF1-13 on the barrier function of the intestinal epithelial model treated with H2O2 was investigated by the transepithelial electrical resistance (TEER). The metabolites enhanced the Claudin-4 (CLDN-4) expression, including at the transcription level, indicated by immunofluorescence staining and quantitative RT-PCR. The metabolites also showed a suppression of aquaporin3 (AQP3) expression. Lactic acid (LA) produced by this strain of homofermentative lactic acid bacteria (LAB) had a similar enhancement on CLDN-4 expression. The metabolites of L. plantarum strain BF1-13 alleviated the dysfunction of intestinal epithelial barrier owing to its enhancement on the tight junctions (TJs) by LA, along with its suppression on AQP3-facilitating H2O2 intracellular invasion into Caco-2 cells. This is the first report on the enhancement of TJs by LA produced by LAB.

In vivo evolution of lactic acid hyper-tolerant Clostridium thermocellum

Lactic acid (LA) has several applications in the food, cosmetics and pharmaceutical industries, as well as in the production of biodegradable plastic polymers, namely polylactides. Industrial production of LA is essentially based on microbial fermentation. Recent reports have shown the potential of the cellulolytic bacterium Clostridium thermocellum for direct LA production from inexpensive lignocellulosic biomass. However, C. thermocellum is highly sensitive to acids and does not grow at pH < 6.0. Improvement of LA tolerance of this microorganism is pivotal for its application in cost-efficient production of LA. In the present study, the LA tolerance of C. thermocellum strains LL345 (wild-type fermentation profile) and LL1111 (high LA yield) was increased by adaptive laboratory evolution. At large inoculum size (10 %), the maximum tolerated LA concentration of strain LL1111 was more than doubled, from 15 g/L to 35 g/L, while subcultures evolved from LL345 showed 50-85 % faster growth in medium containing 45 g/L LA. Gene mutations (pyruvate phosphate dikinase, histidine protein kinase/phosphorylase) possibly affecting carbohydrate and/or phosphate metabolism have been detected in most LA-adapted populations. Although improvement of LA tolerance may sometimes also enable higher LA production in microorganisms, C. thermocellum LA-adapted cultures showed a yield of LA, and generally of other organic acids, similar to or lower than parental strains. Based on its improved LA tolerance and LA titer similar to its parent strain (LL1111), mixed adapted culture LL1630 showed the highest performing phenotype and could serve as a framework for improving LA production by further metabolic engineering.

Two-species community design of lactic acid bacteria for optimal production of lactate

Microbial communities that metabolise pentose and hexose sugars are useful in producing high-value chemicals, resulting in the effective conversion of raw materials to the product, a reduction in the production cost, and increased yield. Here, we present a computational analysis approach called CAMP (Co-culture/Community Analyses for Metabolite Production) that simulates and identifies appropriate communities to produce a metabolite of interest. To demonstrate this approach, we focus on the optimal production of lactate from various Lactic Acid Bacteria. We used genome-scale metabolic models (GSMMs) belonging to Lactobacillus, Leuconostoc, and Pediococcus species from the Virtual Metabolic Human (VMH; https://vmh.life/) resource and well-curated GSMMs of L. plantarum WCSF1 and L. reuteri JCM 1112. We analysed 1176 two-species communities using a constraint-based modelling method for steady-state flux-balance analysis of communities. Flux variability analysis was used to detect the maximum lactate flux in the communities. Using glucose or xylose as substrates separately or in combination resulted in either parasitism, amensalism, or mutualism being the dominant interaction behaviour in the communities. Interaction behaviour between members of the community was deduced based on variations in the predicted growth rates of monocultures and co-cultures. Acetaldehyde, ethanol, acetate, among other metabolites, were found to be cross-fed between community members. L. plantarum WCSF1 was found to be a member of communities with high lactate yields. In silico community optimisation strategies to predict reaction knock-outs for improving lactate flux were implemented. Reaction knock-outs of acetate kinase, phosphate acetyltransferase, and fumarate reductase in the communities were found to enhance lactate production.

Valorization of municipal organic waste into purified lactic acid

Municipal organic waste (biowaste) consists of food derived starch, protein and sugars, and lignocellulose derived cellulose, hemicellulose, lignin and pectin. Proper management enables nutrient recycling and sustainable production of platform chemicals such as lactic acid (LA). This review gathers the most important information regarding use of biowaste for LA fermentation covering pre-treatment, enzymatic hydrolysis, fermentation and downstream processing to achieve high purity LA. The optimal approach was found to treat the two biowaste fractions separately due to different pre-treatment and enzyme needs for achieving enzymatic hydrolysis and to do continues fermentation to achieve high cell density and high LA productivity up to 12 g/L/h for production of both L and D isomers. The specific productivity was 0.4 to 0.5 h^-1 but with recalcitrant biomass, the enzymatic hydrolysis was rate limiting. Novel purification approaches included reactive distillation and emulsion liquid membrane separation yielding purities sufficient for polylactic acid production.

Third-generation L-Lactic acid production by the microwave-assisted hydrolysis of red macroalgae Eucheuma denticulatum extract

The development of an efficient third-generation L-lactic acid (L-LA) production process from Eucheuma denticulatum extract (EDE) was achieved in this study. Microwave-assisted dilute acid hydrolysis (MADAH) and microwave-assisted hydrothermal hydrolysis (MAHTH) were chosen as the hydrolysis of EDE for the objective of increasing galactose yield. Single-factor optimization of hydrolysis of the EDE was studied, MADAH had high performance in galactose production relative to MAHTH, in which the yield and optimal conditions for both processes were 50.7% (0.1 M H₂SO₄, 120 °C for 25 min) and 47.8% (0 M H₂SO₄,160 °C for 35 min), respectively. For fermentation, the optimal L-LA yield was achieved at the inoculum cell density of 4% (w/w) Bacillus coagulans ATCC 7050 with 89.4% and 6% (w/w) Lactobacillus acidophilus LA-14 with 87.6%. In addition, lipid-extracted Chlorella vulgaris residues (CVRs) as co-nutrient supplementation increased the relative abundance of B. coagulans ATCC 7050, thus benefiting L-LA production.

Current Progress in Production of Building-Block Organic Acids by Consolidated Bioprocessing of Lignocellulose

Several organic acids have been indicated among the top value chemicals from biomass. Lignocellulose is among the most attractive feedstocks for biorefining processes owing to its high abundance and low cost. However, its highly complex nature and recalcitrance to biodegradation hinder development of cost-competitive fermentation processes. Here, current progress in development of single-pot fermentation (i.e., consolidated bioprocessing, CBP) of lignocellulosic biomass to high value organic acids will be examined, based on the potential of this approach to dramatically reduce process costs. Different strategies for CBP development will be considered such as: (i) design of microbial consortia consisting of (hemi)cellulolytic and valuable-compound producing strains; (ii) engineering of microorganisms that combine biomass-degrading and high-value compound-producing properties in a single strain. The present review will mainly focus on production of organic acids with application as building block chemicals (e.g., adipic, cis,cis-muconic, fumaric, itaconic, lactic, malic, and succinic acid) since polymer synthesis constitutes the largest sector in the chemical industry. Current research advances will be illustrated together with challenges and perspectives for future investigations. In addition, attention will be dedicated to development of acid tolerant microorganisms, an essential feature for improving titer and productivity of fermentative production of acids.