In situ controlled release of stromal cell-derived factor-1α and antimiR-138 for on-demand cranial bone regeneration

Bioactive materials for in vivo sweat gland regeneration

Loss of sweat glands (SwGs) commonly associated with extensive skin defects is a leading cause of hyperthermia and heat stroke. In vivo tissue engineering possesses the potential to take use of the body natural ability to regenerate SwGs, making it more conducive to clinical translation. Despite recent advances in regenerative medicine, reconstructing SwG tissue with the same structure and function as native tissue remains challenging. Elucidating the SwG generation mechanism and developing biomaterials for in vivo tissue engineering is essential for understanding and developing in vivo SwG regenerative strategies. Here, we outline the cell biology associated with functional wound healing and the characteristics of bioactive materials. We critically summarize the recent progress in bioactive material-based cell modulation approaches for in vivo SwG regeneration, including the recruitment of endogenous cells to the skin lesion for SwG regeneration and in vivo cellular reprogramming for SwG regeneration. We discussed the re-establishment of microenvironment via bioactive material-mediated regulators. Besides, we offer promising perspectives for directing in situ SwG regeneration via bioactive material-based cell-free strategy, which is a simple and effective approach to regenerate SwG tissue with both fidelity of structure and function. Finally, we discuss the opportunities and challenges of in vivo SwG regeneration in detail. The molecular mechanisms and cell fate modulation of in vivo SwG regeneration will provide further insights into the regeneration of patient-specific SwGs and the development of potential intervention strategies for gland-derived diseases.

Development of miR-26a-activated scaffold to promote healing of critical-sized bone defects through angiogenic and osteogenic mechanisms

Very large bone defects significantly diminish the vascular, blood, and nutrient supply to the injured site, reducing the bone's ability to self-regenerate and complicating treatment. Delivering nanomedicines from biomaterial scaffolds that induce host cells to produce bone-healing proteins is emerging as an appealing solution for treating these challenging defects. In this context, microRNA-26a mimics (miR-26a) are particularly interesting as they target the two most relevant processes in bone regeneration-angiogenesis and osteogenesis. However, the main limitation of microRNAs is their poor stability and issues with cytosolic delivery. Thus, utilising a collagen-nanohydroxyapatite (coll-nHA) scaffold in combination with cell-penetrating peptide (RALA) nanoparticles, we aimed to develop an effective system to deliver miR-26a nanoparticles to regenerate bone defects in vivo. The microRNA-26a complexed RALA nanoparticles, which showed the highest transfection efficiency, were incorporated into collagen-nanohydroxyapatite scaffolds and in vitro assessment demonstrated the miR-26a-activated scaffolds effectively transfected human mesenchymal stem cells (hMSCs) resulting in enhanced production of vascular endothelial growth factor, increased alkaline phosphatase activity, and greater mineralisation. After implantation in critical-sized rat calvarial defects, micro CT and histomorphological analysis revealed that the miR-26a-activated scaffolds improved bone repair in vivo, producing new bone of superior quality, which was highly mineralised and vascularised compared to a miR-free scaffold. This innovative combination of osteogenic collagen-nanohydroxyapatite scaffolds with multifunctional microRNA-26a complexed nanoparticles provides an effective carrier delivering nanoparticles locally with high efficacy and minimal off-target effects and demonstrates the potential of targeting osteogenic-angiogenic coupling using scaffold-based nanomedicine delivery as a new "off-the-shelf" product capable of healing complex bone injuries.

3D and 4D printing hydroxyapatite-based scaffolds for bone tissue engineering and regeneration

The osseous tissue can be classified as a nanocomposite that encompasses a complex interweaving of organic and inorganic matrices. This intricate amalgamation consists of a collagen component and a mineral phase that are intricately arranged to form elaborate and perforated configurations. Hydroxyapatite, whether synthesized artificially or obtained from natural sources, has garnered considerable attention as a composite material in the field of bone tissue engineering due to its striking resemblance to bone in terms of structure and characteristics. Hydroxyapatite (HA) constitutes the predominant ceramic biomaterial for biomedical applications due to its ability to replicate the mineral composition of vertebrate bone. Nonetheless, it is noteworthy that the present biomimetic substance exhibits unfavorable mechanical characteristics, characterized by insufficient tensile and compressive strength, thus rendering it unsuitable for effective employment in the field of bone tissue engineering. Due to its beneficial attributes, hydroxyapatite (HA) is frequently employed in conjunction with various polymers and crosslinkers as composites to enhance mechanical properties and overall efficacy of implantable biomaterials engineered. The restoration of skeletal defects through the use of customized replacements is an effective way to replace damaged or lost bone structures. This method not only restores the bones' original functions but also reinstates their initial aesthetic appearance. The utilization of hydroxyapatite-polymer composites within 3D-printed grafts necessitates meticulous optimization of both mechanical and biological properties, in order to ensure their suitability for employment in medical devices. The utilization of 3D-printing technology represents an innovative approach in the manufacturing of HA-based scaffolds, which offers advantageous prospects for personalized bone regeneration. The expeditious prototyping method, with emphasis on the application of 3D printing, presents a viable approach in the development of bespoke prosthetic implants, grounded on healthcare data sets. 4D printing approach is an evolved form of 3D printing that utilizes programmable materials capable of altering the intended shape of printed structures, contingent upon single or dual stimulating factors. These factors include aspects such as pH level, temperature, humidity, crosslinking degree, and leaching factors.

Progress in the application of 3D-printed sodium alginate-based hydrogel scaffolds in bone tissue repair

In recent years, hydrogels have been widely used in the biomedical field as materials with excellent bionic structures and biological properties. Among them, the excellent comprehensive properties of natural polymer hydrogels represented by sodium alginate have attracted the great attention of researchers. At the same time, by physically blending sodium alginate with other materials, the problems of poor cell adhesion and mechanical properties of sodium alginate hydrogels were directly improved without chemical modification of sodium alginate. The composite blending of multiple materials can also improve the functionality of sodium alginate hydrogels, and the prepared composite hydrogel also has a larger application field. In addition, based on the adjustable viscosity of sodium alginate-based hydrogels, sodium alginate-based hydrogels can be loaded with cells to prepare biological ink, and the scaffold can be printed out by 3D printing technology for the repair of bone defects. This paper first summarizes the improvement of the properties of sodium alginate and other materials after physical blending. Then, it summarizes the application progress of sodium alginate-based hydrogel scaffolds for bone tissue repair based on 3D printing technology in recent years. Moreover, we provide relevant opinions and comments to provide a theoretical basis for follow-up research.

Recent Developments in Biopolymer-Based Hydrogels for Tissue Engineering Applications

Hydrogels are being investigated for their application in inducing the regeneration of various tissues, and suitable conditions for each tissue are becoming more apparent. Conditions such as the mechanical properties, degradation period, degradation mechanism, and cell affinity can be tailored by changing the molecular structure, especially in the case of polymers. Furthermore, many high-functional hydrogels with drug delivery systems (DDSs), in which drugs or bioactive substances are contained in controlled hydrogels, have been reported. This review focuses on the molecular design and function of biopolymer-based hydrogels and introduces recent developments in functional hydrogels for clinical applications.

Biomimicry in nanotechnology: a comprehensive review

Biomimicry has been utilized in many branches of science and engineering to develop devices for enhanced and better performance. The application of nanotechnology has made life easier in modern times. It has offered a way to manipulate matter and systems at the atomic level. As a result, the miniaturization of numerous devices has been possible. Of late, the integration of biomimicry with nanotechnology has shown promising results in the fields of medicine, robotics, sensors, photonics, etc. Biomimicry in nanotechnology has provided eco-friendly and green solutions to the energy problem and in textiles. This is a new research area that needs to be explored more thoroughly. This review illustrates the progress and innovations made in the field of nanotechnology with the integration of biomimicry.

Polymeric Nanocomposite Hydrogel Scaffolds in Craniofacial Bone Regeneration: A Comprehensive Review

Nanocomposite biomaterials combine a biopolymeric matrix structure with nanoscale fillers. These bioactive and easily resorbable nanocomposites have been broadly divided into three groups, namely natural, synthetic or composite, based on the polymeric origin. Preparing such nanocomposite structures in the form of hydrogels can create a three-dimensional natural hydrophilic atmosphere pivotal for cell survival and new tissue formation. Thus, hydrogel-based cell distribution and drug administration have evolved as possible options for bone tissue engineering and regeneration. In this context, nanogels or nanohydrogels, created by cross-linking three-dimensional polymer networks, either physically or chemically, with high biocompatibility and mechanical properties were introduced as promising drug delivery systems. The present review highlights the potential of hydrogels and nanopolymers in the field of craniofacial tissue engineering and bone regeneration.

In Situ Forming Hydrogel as a Tracer and Degradable Lacrimal Plug for Dry Eye Treatment

Lacrimal plug is an effective and widely therapeutic strategy to treat dry eye. However, almost all commercialized plugs are fixed in a certain design and associated with many complications, such as spontaneous plug extrusion, epiphora, and granuloma and cannot be traced in the long-term. Herein, a simple in situ forming hydrogel is developed as a tracer and degradable lacrimal plug to achieve the best match with the irregular lacrimal passages. In this strategy, methacrylate-modified silk fibroin (SFMA) is served as a network, and a self-assembled indocyanine green fluorescence tracer nanoparticle (FTN) is embedded as an indicator to develop the hydrogel plug using visible photo-crosslinking. This SFMA/FTN hydrogel plug has excellent biocompatibility and biodegradability, which can be noninvasively monitored by near-infrared light. In vivo tests based on dry eye rabbits show that the SFMA/FTN hydrogel plug can completely block the lacrimal passages and greatly improve the various clinical indicators of dry eye. These results demonstrate that the SFMA/FTN hydrogel is suitable as an injectable and degradable lacrimal plug with a long-term tracking function. The work offers a new approach to the development of absorbable plugs for the treatment of dry eye.

Delivering Multifunctional Peptide-Conjugated Gene Carrier/miRNA-218 Complexes from Monodisperse Microspheres for Bone Regeneration

MicroRNAs (miRNAs) play a pivotal role in regulating gene expression and are considered new molecular targets in bone tissue engineering. However, effective delivery of miRNAs to the defect areas and transfection of the miRNAs into osteogenic progenitor cells has been an obstacle in the application. In this work, miRNA-218 (miR-218) was used as an osteogenic miRNA regulator, and a multifunctional peptide-conjugated gene carrier poly(lactide-co-glycolide)-g-polyethylenimine-b-polyethylene glycol-R9-G4-IKVAVW (PPP-RGI) was developed to condense with miR-218 to form PPP-RGI/miR-218 complexes that were further encapsulated into monodisperse injectable microspheres for enhanced bone regeneration. The PPP-RGI was synthesized via conjugating R9-G4-IKVAVW (RGI), a multifunctional peptide, onto poly(lactide-co-glycolide)-g-polyethylenimine-b-polyethylene glycol (PPP). A microfluidic and synchronous photo-cross-linking process was further developed to encapsulate the PPP-RGI/miR-218 complexes into monodisperse gelatin methacryloyl microspheres. The monodisperse microspheres controlled the delivery of PPP-RGI/miR-218 to the designated defect site, and PPP-RGI facilitated the transfection of miR-218 into osteogenic progenitor cells. An in vivo calvarial defect model showed that the PPP-RGI/miR-218-loaded microspheres significantly enhanced bone tissue regeneration. This work provides a novel approach to effectively deliver miRNA and transfect targeting cells in vivo for advanced regenerative therapies.

Synthesis of Biocompatible Composite Material Based on Cryogels of Polyvinyl Alcohol and Calcium Phosphates

At the moment, the field of biomedical materials science is actively developing, which aims at creating new functional materials. A developing direction in biomedical materials science is that towards the treatment of diseases associated with bone tissue disorders, using biodegradable composite materials based on polymer and calcium phosphate materials. We developed a material based on polyvinyl alcohol cryogel, mineralized with calcium phosphate. A material based on cryogel of polyvinyl alcohol mineralized with calcium phosphate was developed. The composites were obtained by the method of cyclic freezing-thawing, and the synthesis of calcium phosphates was carried out in situ with heating, stirring, and exposure to microwave radiation. The phase composition, as well as the composition of functional groups, was determined by IR spectroscopy and X-ray phase analysis. Monocytes isolated from human blood showed higher viability compared to the controls.

Non-coding RNA delivery for bone tissue engineering: progress, challenges and potential solutions

More than 20 million individuals worldwide suffer from congenital or acquired bone defects annually. The development of bone scaffold materials that simulate natural bone for bone defect repair remains challenging. Recently, ncRNA-based therapies for bone defects have attracted increasing interest because of the great potential of ncRNAs in disease treatment. Various types of ncRNAs regulate gene expression in osteogenesis-related cells via multiple mechanisms. The delivery of ncRNAs to the site of bone loss through gene vectors or scaffolds is a potential therapeutic option for bone defect repair. Therefore, this study discusses and summarizes the regulatory mechanisms of miRNAs, siRNAs, and piRNAs in osteogenic signaling and reviews the widely used current RNA delivery vectors and scaffolds for bone defect repair. Additionally, current challenges and potential solutions of delivery scaffolds for bone defect repair are proposed, with the aim of providing a theoretical basis for their future clinical applications.

Comparison Capacity of Collagen Hydrogel and Collagen/Strontium Bioglass Nanocomposite Scaffolds With and Without mesenchymal Stem Cells in Regeneration of Critical Sized Bone Defect in a Rabbit Animal Model

Bone self-healing is limited and requires additional or external intervention to promote and accelerate bone regeneration. Therefore, the aim of this study was to investigate the potential capacity of hydrogel collagen (Co) nanocomposite alone, and in combination with 2% strontium (Co/BGSr2%) in presence of mesenchymal stem cells (MSCs) in full-thickness bone defect regeneration in the rabbit animal model. A total of 72 New Zealand white rabbits were randomly divided in 6 groups of 12 rabbits with full-thickness bone defect. In five groups, the bone defect was treated with MSC, Co, Co/BGSr2%, Co + MSCs, and Co/BGSr2% + MSCs. No treatment was done in the control group. The treatments were assessed radiographically, histopathologically, and immunohistochemically on days 14, 28, 42, and 56 post-treatment. The highest radiographical and histological scores were belonged to the Co/BGSr2% + MSC followed by Co + MSCs, Co/BGSr2%, Co, MSC, and the control groups. The highest and lowest mean expression level of osteocalcin was detected in the Co/BGSr2% + MSC and control groups by 28th dayof post-implantation, respectively. In contrast, the highest and lowest mean expression level of osteocalcin on day 56 post-implantation was belonged to the control and Co/BGSr2% + MSC, respectively. The Co/BGSr2% nanocomposite scaffold seeded with MSC can accelerate bone regeneration resulted from osteoblastic production of osteocalcin protein. Therefore, collagen hydrogel combined with 2% strontium in nanocomposite form is a suitable candidate scaffold for bone tissue engineering.

AM1241-Loaded Poly(ethylene glycol)–Dithiothreitol Hydrogel Repairs Cranial Bone Defects by Promoting Vascular Endothelial Growth Factor and COL-1 Expression

Objective: To explore the repair effect of the prepared drug-loaded AM1241 poly(ethylene glycol)–dithiothreitol (PEG-DTT) hydrogel on cranial bone defects in SD rats.

Methods: The PEG-DTT hydrogel under borax catalysis was quickly prepared, and the characterization of the material was observed by a scanning electron microscope. The effect of AM1241 on cell activity and bone tissue differentiation was tested. The SD rat model of cranial bone defect was established, and the defect was repaired by injecting the prepared hydrogel into the defect. The defect was divided into four groups, namely, sham group, blank group, PEG-DTT group, and PEG-DTT + AM1241 group. The rats were euthanized, and whole cranial bone was taken out for micro-CT and histological observation.

Results: The prepared hydrogel is porous; it is liquid when heated to 80°C and a hydrogel when cooled to 25°C. 5–10 μM AM1241 increased osteoblast activity. A moderate amount of AM1241 can promote osteogenic differentiation. Both the PEG-DTT group and PEG-DTT + AM1241 group showed obvious new bone tissue formation, but the PEG-DTT + AM1241 group had a better effect. In addition, the new bone tissue in the PEG-DTT + AM1241 group was significantly more than that in the other groups.

Conclusion: The prepared AM1241-loaded PEG-DTT hydrogel showed a good repair effect on SD rats with cranial bone defects. It can be used as materials for cranial bone repair in SD rats with cranial bone defects, but the repair effect is weaker than that of normal bone. These results provide a theoretical and practical basis for its further clinical application.

Nanotechnology-Assisted Cell Tracking

The usefulness of nanoparticles (NPs) in the diagnostic and/or therapeutic sector is derived from their aptitude for navigating intra- and extracellular barriers successfully and to be spatiotemporally targeted. In this context, the optimization of NP delivery platforms is technologically related to the exploitation of the mechanisms involved in the NP–cell interaction. This review provides a detailed overview of the available technologies focusing on cell–NP interaction/detection by describing their applications in the fields of cancer and regenerative medicine. Specifically, a literature survey has been performed to analyze the key nanocarrier-impacting elements, such as NP typology and functionalization, the ability to tune cell interaction mechanisms under in vitro and in vivo conditions by framing, and at the same time, the imaging devices supporting NP delivery assessment, and consideration of their specificity and sensitivity. Although the large amount of literature information on the designs and applications of cell membrane-coated NPs has reached the extent at which it could be considered a mature branch of nanomedicine ready to be translated to the clinic, the technology applied to the biomimetic functionalization strategy of the design of NPs for directing cell labelling and intracellular retention appears less advanced. These approaches, if properly scaled up, will present diverse biomedical applications and make a positive impact on human health.

Transcriptome Analysis Revealed the Symbiosis Niche of 3D Scaffolds to Accelerate Bone Defect Healing

Three dimension (3D) printed scaffolds have been shown to be superior in promoting tissue repair, but the cell-level specific regulatory network activated by 3D printing scaffolds with different material components to form a symbiosis niche have not been systematically revealed. Here, three typical 3D printed scaffolds, including natural polymer hydrogel (gelatin-methacryloyl, GelMA), synthetic polymer material (polycaprolactone, PCL), and bioceramic (β-tricalcium phosphate, β-TCP), are fabricated to explore the regulating effect of the symbiotic microenvironment during bone healing. Enrichment analysis show that hydrogel promotes tissue regeneration and reconstruction by improving blood vessel generation by enhancing oxygen transport and red blood cell development. The PCL scaffold regulates cell proliferation and differentiation by promoting cellular senescence, cell cycle and deoxyribonucleic acid (DNA) replication pathways, accelerating the process of endochondral ossification, and the formation of callus. The β-TCP scaffold can specifically enhance the expression of osteoclast differentiation and extracellular space pathway genes to promote the differentiation of osteoclasts and promote the process of bone remodeling. In these processes, specific biomaterial properties can be used to guide cell behavior and regulate molecular network in the symbiotic microenvironment to reduce the barriers of regeneration and repair.

In situ bone regeneration with sequential delivery of aptamer and BMP2 from an ECM-based scaffold fabricated by cryogenic free-form extrusion

In situ tissue engineering is a powerful strategy for the treatment of bone defects. It could overcome the limitations of traditional bone tissue engineering, which typically involves extensive cell expansion steps, low cell survival rates upon transplantation, and a risk of immuno-rejection. Here, a porous scaffold polycaprolactone (PCL)/decellularized small intestine submucosa (SIS) was fabricated via cryogenic free-form extrusion, followed by surface modification with aptamer and PlGF-2123-144*-fused BMP2 (pBMP2). The two bioactive molecules were delivered sequentially. The aptamer Apt19s, which exhibited binding affinity to bone marrow-derived mesenchymal stem cells (BMSCs), was quickly released, facilitating the mobilization and recruitment of host BMSCs. BMP2 fused with a PlGF-2123-144 peptide, which showed "super-affinity" to the ECM matrix, was released in a slow and sustained manner, inducing BMSC osteogenic differentiation. In vitro results showed that the sequential release of PCL/SIS-pBMP2-Apt19s promoted cell migration, proliferation, alkaline phosphatase activity, and mRNA expression of osteogenesis-related genes. The in vivo results demonstrated that the sequential release system of PCL/SIS-pBMP2-Apt19s evidently increased bone formation in rat calvarial critical-sized defects compared to the sequential release system of PCL/SIS-BMP2-Apt19s. Thus, the novel delivery system shows potential as an ideal alternative for achieving cell-free scaffold-based bone regeneration in situ.

Quercetin loaded silver nanoparticles in hydrogel matrices for diabetic wound healing

Quercetin (QCT) is an effective antioxidant, antifibrotic and wound healing agent. Silver nanoparticles (AgNPs) are an effective antimicrobial, antifungal and wound healing agent and considered as gold standard for wound treatment especially diabetic and burn wounds. The present study aimed to investigate QCT loaded AgNPs in hydrogel matrices (QCT-AgNPs hydrogel) as synergistic treatment paradigms for diabetic wound. Quality by Design approach was employed for the optimization of hydrogel preparation using carbopol-934 andaloevera.The developed QCT-AgNPs hydrogel was characterized for hydrodynamic diameter, %entrapment efficiency (%EE), surface morphology, texture analysis,in-vitrodrug release, skin irritation study,ex-vivopermeation study (confocal study), and antimicrobial efficacy. The optimized formulation showed hydrodynamic diameter of ∼44.1 nm with smooth spherical surface morphology and ∼92.09% of QCT was entrapped in QCT-AgNPs hydrogel matrices. The antimicrobial study revealed superior therapeutic efficacy of QCT-AgNPs hydrogel in comparison to marketed (MRKT) gel onS. aureusandE. coli. Moreover,in-vivoresults demonstrated that QCT-AgNPs hydrogel significantly (p < 0.001) reduced the wound gap and increased % re-epithelialization compared with diabetic control after 18 d of post treatment in excisional diabetic wound model. In conclusion, this study opens up an avenue for the treatment of diabetic wound.

Calcium-Enriched Nanofibrillated Cellulose/Poloxamer in-situ Forming Hydrogel Scaffolds as a Controlled Delivery System of Raloxifene HCl for Bone Engineering

PURPOSE

TEMPO-oxidized nanofibrillated cellulose (TONFC) originating from an agricultural waste (sugar cane) was utilized to prepare injectable in-situ forming hydrogel scaffolds (IHS) for regenerative medicine.

METHODS

TONFC was prepared and characterized for its morphology and chemical structure using TEM and FT-IR, respectively. The cold method was applied to prepare hydrogels. Various concentrations of poloxamer 407 were added to the prepared TONFC (0.5%w/w). Different sources of calcium, Fujicalin® (DCP) or hydroxyapatite (TCP), were used to formulate the aimed calcium-enriched raloxifene hydrochloride-loaded IHS. Gelation temperature, drug content, injectability and in-vitro drug release were evaluated along with the morphological characters. Cytocompatibility studies and tissue regeneration properties were assessed on Saos-2 cells.

RESULTS

TEM photograph of TONFC showed fibrous nanostructure. The selected formulation "Ca-IHS4" composed of TONFC+15% P407+10% TCP showed the most prolonged release pattern for 12 days with the least burst effect (about 25% within 24 h). SEM micro-photographs of the in-situ formed scaffolds showed a highly porous 3D structure. Cytocompatibility studies of formulation "Ca-IHS4" revealed the biocompatibility as well as improved cell adhesion, alkaline phosphatase enzyme activity and calcium ion deposition.

CONCLUSION

The outcomes suggest that Ca-IHS4 presents a simple, safe-line and non-invasive strategy for bone regeneration.

Preliminary Animal Study on Bone Formation Ability of Commercialized Particle-Type Bone Graft with Increased Operability by Hydrogel

The purpose of this study was to evaluate the bone-generating ability of a new bovine-derived xenograft (S1-XB) containing hydrogel. For control purposes, we used Bio-Oss and Bone-XB bovine-derived xenografts. S1-XB was produced by mixing Bone-XB and hydrogel. Cell proliferation and differentiation studies were performed to assess cytotoxicities and cell responses. For in vivo study, 8 mm-sized cranial defects were formed in 16 rats, and then the bone substitutes were transplanted into defect sites in the four study groups, that is, a Bio-Oss group, a Bone-XB group, an S1-XB group, and a control (all n = 4); in the control group defects were left empty. Eight weeks after surgery, new bone formation areas were measured histomorphometrically. In the cell study, extracts of Bio-Oss, Bone-XB, and S1-XB showed good results in terms of the osteogenic differentiation of human mesenchymal stem cells (hMSCs) and no cytotoxic reaction was evident. No significant difference was observed between mean new bone areas in the Bio-Oss (36.93 ± 4.27%), Bone-XB (35.07 ± 3.23%), and S1-XB (30.80 ± 6.41%) groups, but new bone area was significantly smaller in the control group (18.73 ± 5.59%) (p < 0.05). Bovine-derived bone graft material containing hydrogel (S1-XB) had a better cellular response and an osteogenic effect similar to Bio-Oss.

Gold nanorods-mediated efficient synergistic immunotherapy for detection and inhibition of postoperative tumor recurrence

Tumor recurrence after surgery is the main cause of treatment failure. However, the initial stage of recurrence is not easy to detect, and it is difficult to cure in the late stage. In order to improve the life quality of postoperative patients, an efficient synergistic immunotherapy was developed to achieve early diagnosis and treatment of post-surgical tumor recurrence, simultaneously. In this paper, two kinds of theranostic agents based on gold nanorods (AuNRs) platform were prepared. AuNRs and quantum dots (QDs) in one agent was used for the detection of carcinoembryonic antigen (CEA), using fluorescence resonance energy transfer (FRET) technology to indicate the occurrence of in situ recurrence, while AuNRs in the other agent was used for photothermal therapy (PTT), together with anti-PDL1 mediated immunotherapy to alleviate the process of tumor metastasis. A series of assays indicated that this synergistic immunotherapy could induce tumor cell death and the increased generation of CD3⁺/CD4⁺ T-lymphocytes and CD3⁺/CD8⁺ T-lymphocytes. Besides, more immune factors (IL-2, IL-6, and IFN-γ) produced by synergistic immunotherapy were secreted than mono-immunotherapy. This cooperative immunotherapy strategy could be utilized for diagnosis and treatment of postoperative tumor recurrence at the same time, providing a new perspective for basic and clinical research.

Composites Based on Hydroxyapatite and Whey Protein Isolate for Applications in Bone Regeneration

Hydroxyapatite (HAp) is a bioactive ceramic with great potential for the regeneration of the skeletal system. However, its mechanical properties, especially its brittleness, limit its application. Therefore, in order to increase its ability to transmit stresses, it can be combined with a polymer phase, which increases its strength without eliminating the important aspect of bioactivity. The presented work focuses on obtaining organic-inorganic hydrogel materials based on whey protein isolate (WPI) reinforced with nano-HAp powder. The proportion of the ceramic phase was in the range of 0-15%. Firstly, a physicochemical analysis of the materials was performed using XRD, FT-IR and SEM. The hydrogel composites were subjected to swelling capacity measurements, potentiometric and conductivity analysis, and in vitro tests in four liquids: distilled water, Ringer's fluid, artificial saliva, and simulated body fluid (SBF). The incubation results demonstrated the successful formation of new layers of apatite as a result of the interaction with the fluids. Additionally, the influence of the materials on the metabolic activity according to ISO 10993-5:2009 was evaluated by identifying direct contact cytotoxicity towards L-929 mouse fibroblasts, which served as a reference. Moreover, the stimulation of monocytes by hydrogels via the induction of nuclear factor (NF)-κB was investigated. The WPI/HAp composite hydrogels presented in this study therefore show great potential for use as novel bone substitutes.

Designing biomaterials for the delivery of RNA therapeutics to stimulate bone healing

Ribonucleic acids (small interfering RNA, microRNA, and messenger RNA) have been emerging as a promising new class of therapeutics for bone regeneration. So far, however, research has mostly focused on stability and complexation of these oligonucleotides for systemic delivery. By comparison, delivery of RNA nanocomplexes from biomaterial carriers can facilitate a spatiotemporally controlled local delivery of osteogenic oligonucleotides. This review provides an overview of the state-of-the-art in the design of biomaterials which allow for temporal and spatial control over RNA delivery. We correlate this concept of spatiotemporally controlled RNA delivery to the most relevant events that govern bone regeneration to evaluate to which extent tuning of release kinetics is required. In addition, inspired by the physiological principles of bone regeneration, potential new RNA targets are presented. Finally, considerations for clinical translation and upscaled production are summarized to stimulate the design of clinically relevant RNA-releasing biomaterials.

Cryo-Structured Materials Based on Polyvinyl Alcohol and Hydroxyapatite for Osteogenesis

The application of various materials in biomedical procedures has recently experienced rapid growth. One of the areas is the treatment of many of different types of bone-related diseases and disorders by using biodegradable polymer-ceramic composites. We have developed a material based on cryogel polyvinyl alcohol, mineralized with calcium phosphate. Composites were obtained by cyclic freezing-thawing, the synthesis of calcium phosphates was carried out in situ under the influence of microwave radiation with heating and stirring. The components of the composites were determined using the methods of IR-spectroscopy and scanning electron microscopy and electron probe microanalyzer, as well as their morphology and surface properties. The biological compatibility of the material was investigated in vivo for a Wistar rat. The assessment of the quality of bone formation between the cryogel-based implant and the damaged bone was carried out by computed tomography. An improvement in the consolidation of the bone defect is observed in the bone with the composite in comparison with the control bone.

MicroRNA function in craniofacial bone formation, regeneration and repair

Bone formation in the craniofacial complex is regulated by cranial neural crest (CNC) and mesoderm-derived cells. Different elements of the developing skull, face, mandible, maxilla (jaws) and nasal bones are regulated by an array of transcription factors, signaling molecules and microRNAs (miRs). miRs are molecular modulators of these factors and act to restrict their expression in a temporal-spatial mechanism. miRs control the different genetic pathways that form the craniofacial complex. By understanding how miRs function in vivo during development they can be adapted to regenerate and repair craniofacial genetic anomalies as well as bone diseases and defects due to traumatic injuries. This review will highlight some of the new miR technologies and functions that form new bone or inhibit bone regeneration.

Recent Approaches for Angiogenesis in Search of Successful Tissue Engineering and Regeneration

Angiogenesis plays a central role in human physiology from reproduction and fetal development to wound healing and tissue repair/regeneration. Clinically relevant therapies are needed for promoting angiogenesis in order to supply oxygen and nutrients after transplantation, thus relieving the symptoms of ischemia. Increase in angiogenesis can lead to the restoration of damaged tissues, thereby leading the way for successful tissue regeneration. Tissue regeneration is a broad field that has shown the convergence of various interdisciplinary fields, wherein living cells in conjugation with biomaterials have been tried and tested on to the human body. Although there is a prevalence of various approaches that hypothesize enhanced tissue regeneration via angiogenesis, none of them have been successful in gaining clinical relevance. Hence, the current review summarizes the recent cell-based and cell free (exosomes, extracellular vesicles, micro-RNAs) therapies, gene and biomaterial-based approaches that have been used for angiogenesis-mediated tissue regeneration and have been applied in treating disease models like ischemic heart, brain stroke, bone defects and corneal defects. This review also puts forward a concise report of the pre-clinical and clinical studies that have been performed so far; thereby presenting the credible impact of the development of biomaterials and their 3D concepts in the field of tissue engineering and regeneration, which would lead to the probable ways for heralding the successful future of angiogenesis-mediated approaches in the greater perspective of tissue engineering and regenerative medicine.

Ascorbic Acid-PEI Carbon Dots with Osteogenic Effects as miR-2861 Carriers to Effectively Enhance Bone Regeneration

Nucleic acid transfer has shown significant potential in the treatment of bone damage because of its long lasting local effect and lower cost. Nonviral vectors, such as nanomaterials, with higher biocompatibility are increasedly applied in the study of bone defect repair. Carbon dots with various reactive groups on the surface not only provide a unique surface to carry therapeutic genes, but also some carbon dots have been reported to promote osteogenic differentiation. The bone regeneration effect of carbon dots in vivo, however, is rarely investigated. MiR-2861 has revealed osteogenic differentiation effects. In the current study, we created ascorbic acid-PEI carbon dots (CD), which were able to carry miR-2861, by the microwave-assisted pyrolysis method. Results demonstrated that CD had excellent fluorescence stability leading to good fluorescence imaging in vitro and in vivo. CD was efficiently internalized into bone marrow stromal cells (BMSCs) through the clathrin-mediated endocytosis pathway and distributed in the mitochondria, endoplasmic reticulum, lysosome, and nucleus. Results from alkaline phosphatase staining, alizarin red staining, and reverse transcription real-time PCR (RT-QPCR) showed that our CD indeed had osteogenic effects in vitro. Flow cytometry data indicated that CD could efficiently deliver miR-2861 into BMSCs in vitro, and CD carrying miR-2861 (CD@miR) had the strongest osteogenic effects. Analyses of hematology, serum biochemistry, and histology showed that CD and CD@miR did not have cytotoxicity and had higher biocompatibility in vivo. Most interestingly, CD and miR-2861 in the CD@miR could act synergistically to promote osteogenic differentiation in vitro and new bone regeneration in vivo remarkably. Our results clearly indicate that the osteogenic CD delivering osteogenic therapeutic gene, miR-2861, can obtain much stronger bone regeneration ability, suggesting that our CD has great potential in future clinical application.

Hyaluronic acid as a bioactive component for bone tissue regeneration: Fabrication, modification, properties, and biological functions

Hyaluronic acid (HA) is widely distributed in the human body, and it is heavily involved in many physiological functions such as tissue hydration, wound repair, and cell migration. In recent years, HA and its derivatives have been widely used as advanced bioactive polymers for bone regeneration. Many medical products containing HA have been developed because this natural polymer has been proven to be nontoxic, noninflammatory, biodegradable, and biocompatible. Moreover, HA-based composite scaffolds have shown good potential for promoting osteogenesis and mineralization. Recently, many HA-based biomaterials have been fabricated for bone regeneration by combining with electrospinning and 3D printing technology. In this review, the polymer structures, processing, properties, and applications in bone tissue engineering are summarized. The challenges and prospects of HA polymers are also discussed.

In vitro study of SDF-1α-loaded injectable and thermally responsive hydrogels for adipose stem cell therapy by SDF-1/CXCR4 axis

Stem cell-based approaches have become a promising therapeutic strategy for treating ischemic diseases. The aim of this study was to develop injectable hydrogel systems for the local release of stromal cell-derived factor-1α (SDF-1α) to recruit adipose stem cells (ASCs) that express CXCR4 to achieve stem cell therapy and therapeutic angiogenesis. Thermoresponsive and injectable chitosan (CS)/β-glycerophosphate disodium salt pentahydrate (βGP) hydrogels with different concentrations of hyaluronic acid (HA) were designed and fabricated to achieve local and sustained release of SDF-1α for ASC recruitment. Herein, the material structures, physical properties, gelation temperature, and gelation time of hydrogels with different compositions were determined. The incorporation of 0.9% HA in CS-based hydrogels not only enhanced the gelation time but also increased the strength of the hydrogels. In addition, the results revealed that the thermoresponsive and injectable CS/βGP/HA hydrogels showed good biocompatibility. In addition, the in vitro release profiles showed that the hydrogels achieved sustained release of SDF-1α over 7 days and enhanced ASC migration. The results revealed that the hydrogels with HA enhanced the sustained release effect compared with the hydrogel without HA, indicating that the HA content regulated the physical and release properties of the injectable hydrogels. Therefore, thermoresponsive and injectable CS/βGP/HA hydrogels may provide an alternative for treating ischemic diseases via SDF-1/CXCR4 axis for ASC recruitment and retention.

Selected Nanomaterials' Application Enhanced with the Use of Stem Cells in Acceleration of Alveolar Bone Regeneration during Augmentation Process

Regenerative properties are different in every human tissue. Nowadays, with the increasing popularity of dental implants, bone regenerative procedures called augmentations are sometimes crucial in order to perform a successful dental procedure. Tissue engineering allows for controlled growth of alveolar and periodontal tissues, with use of scaffolds, cells, and signalling molecules. By modulating the patient's tissues, it can positively influence poor integration and healing, resulting in repeated implant surgeries. Application of nanomaterials and stem cells in tissue regeneration is a newly developing field, with great potential for maxillofacial bony defects. Nanostructured scaffolds provide a closer structural support with natural bone, while stem cells allow bony tissue regeneration in places when a certain volume of bone is crucial to perform a successful implantation. Several types of selected nanomaterials and stem cells were discussed in this study. Their use has a high impact on the efficacy of the current and future procedures, which are still challenging for medicine. There are many factors that can influence the regenerative process, while its general complexity makes the whole process even harder to control. The aim of this study was to evaluate the effectiveness and advantage of both stem cells and nanomaterials in order to better understand their function in regeneration of bone tissue in oral cavity.

The Delivery of RNA-Interference Therapies Based on Engineered Hydrogels for Bone Tissue Regeneration

RNA interference (RNAi) is an efficient post-transcriptional gene modulation strategy mediated by small interfering RNAs (siRNAs) and microRNAs (miRNAs). Since its discovery, RNAi has been utilized extensively to diagnose and treat diseases at both the cellular and molecular levels. However, the application of RNAi therapies in bone regeneration has not progressed to clinical trials. One of the major challenges for RNAi therapies is the lack of efficient and safe delivery vehicles that can actualize sustained release of RNA molecules at the target bone defect site and in surrounding cells. One promising approach to achieve these requirements is encapsulating RNAi molecules into hydrogels for delivery, which enables the nucleic acids to be delivered as RNA conjugates or within nanoparticles. Herein, we reviewed recent investigations into RNAi therapies for bone regeneration where RNA delivery was performed by hydrogels.

Biofabrication of SDF-1 Functionalized 3D-Printed Cell-Free Scaffolds for Bone Tissue Regeneration

Large segmental bone defects occurring after trauma, bone tumors, infections or revision surgeries are a challenge for surgeons. The aim of our study was to develop a new biomaterial utilizing simple and cheap 3D-printing techniques. A porous polylactide (PLA) cylinder was printed and functionalized with stromal-derived factor 1 (SDF-1) or bone morphogenetic protein 7 (BMP-7) immobilized in collagen type I. Biomechanical testing proved biomechanical stability and the scaffolds were implanted into a 6 mm critical size defect in rat femur. Bone growth was observed via x-ray and after 8 weeks, bone regeneration was analyzed with µCT and histological staining methods. Development of non-unions was detected in the control group with no implant. Implantation of PLA cylinder alone resulted in a slight but not significant osteoconductive effect, which was more pronounced in the group where the PLA cylinder was loaded with collagen type I. Addition of SDF-1 resulted in an osteoinductive effect, with stronger new bone formation. BMP-7 treatment showed the most distinct effect on bone regeneration. However, histological analyses revealed that newly formed bone in the BMP-7 group displayed a holey structure. Our results confirm the osteoinductive character of this 3D-biofabricated cell-free new biomaterial and raise new options for its application in bone tissue regeneration.

Electric Field-Driven On-Request Instant in Situ Formation/Removal of Solid Hydrogel within Microchannels for Efficient Electrophoretic Separation

Electrophoretic separation in short microchannels is a promising way for rapid analysis of biomolecules, but the pressurized laminar flow may compromise the separation efficiency. In this work, through an electric field, instant formation and removal of a solid chitosan/β-glycerol phosphate (CS/β-GP) hydrogel within microchannels of microchips were realized. In a typical cross-type microchip, the CS/β-GP hydrogel was precisely formed in the separation microchannel within 15 s of the application of a voltage of 2000 V. Highly efficient separation of peptides and proteins was achieved, and theoretical plate numbers of 0.6 to 1.5 × 10⁶/m were attained for proteins in 120 s. The used hydrogel could be swiftly removed also with an electric field, and the whole procedure was achieved on a standard microchip electrophoresis device with no extra accessory or special operation required.

RNA-based scaffolds for bone regeneration: application and mechanisms of mRNA, miRNA and siRNA

Globally, more than 1.5 million patients undergo bone graft surgeries annually, and the development of biomaterial scaffolds that mimic natural bone for bone grafting remains a tremendous challenge. In recent decades, due to the improved understanding of the mechanisms of bone remodeling and the rapid development of gene therapy, RNA (including messenger RNA (mRNA), microRNA (miRNA), and short interfering RNA (siRNA)) has attracted increased attention as a new tool for bone tissue engineering due to its unique nature and great potential to cure bone defects. Different types of RNA play roles via a variety of mechanisms in bone-related cells in vivo as well as after synthesis in vitro. In addition, RNAs are delivered to injured sites by loading into scaffolds or systemic administration after combination with vectors for bone tissue engineering. However, the challenge of effectively and stably delivering RNA into local tissue remains to be solved. This review describes the mechanisms of the three types of RNAs and the application of the relevant types of RNA delivery vectors and scaffolds in bone regeneration. The improvements in their development are also discussed.

In situ miRNA delivery from a hydrogel promotes osteogenesis of encapsulated mesenchymal stromal cells

Hydrogels are attractive candidates for use in tissue-engineering and the encapsulation and subsequent differentiation of mesenchymal stem/stromal cells (MSCs) is a strategy that holds great promise for the repair and regeneration of bone and cartilage. However, MSCs are well-known for their sensitivity to mechanical cues, particularly substrate stiffness, and so the inherent softness of hydrogels is poorly matched to the mechanical cues that drive efficient osteogenesis. One approach to overcome this limitation is to harness mechanotransductive signalling pathways and override the signals cells receive from their environment. Previous reports demonstrate that mechanosensitive miRNAs, miR-100-5p and miR-143-3p can enhance MSC osteogenesis, using a complex multi-step procedure to transfect, encapsulate and differentiate the cells. In this study, we develop and characterise a facile system for in situ transfection of MSCs encapsulated within a light-crosslinkable gelatin-PEG hydrogel. Comparing the influence of different transfection agents and hydrogel compositions, we show that particle size, charge, and hydrogel mechanical properties all influence the diffusion of embedded transfection agent complexes. By incorporating both MSCs and transfection agents into the hydrogels we demonstrate successful in situ transfection of encapsulated MSCs. Comparing the efficacy of pre- and in situ transfection of miR-100-5p/miR-143-3p on the osteogenic capacity of hydrogel-encapsulated MSCs, our data demonstrates superior mineralisation and osteogenic gene expression following in situ transfections. Overall, we demonstrate a simple, one-pot system for in situ transfection of miRNAs to enhance MSC osteogenic potential and thus demonstrates significant promise to improve the efficiency of MSC differentiation in hydrogels for bone tissue-engineering applications. STATEMENT OF SIGNIFICANCE: Mesenchymal stromal cells (MSCs) are sensitive to cues from their surrounding microenvironment. Osteogenesis is enhanced in MSCs grown on stiffer substrates, but this is limited when using hydrogels for bone tissue-engineering. Modulating pro-osteogenic genes with mechanosensitive microRNAs (miRNAs) represents a potential tool to overcome this challenge. Here we report a hydrogel platform to deliver miRNAs to encapsulated MSCs. We characterise effects of hydrogel composition and transfection agent type on their mobility and transfection efficiency, demonstrating successful in situ transfection of MSCs and showing that miRNAs can significantly enhance osteogenic mineral deposition and marker gene expression. This system was simpler and more effective than conventional 2D transfection prior to encapsulation and therefore holds promise to improve MSC differentiation in bone tissue-engineering.

Bioactive, degradable and multi-functional three-dimensional membranous scaffolds of bioglass and alginate composites for tissue regenerative applications

Multifunctional bioactive hydrogel ECM like membrane for 3D dynamic tissue/disease modelling.

Biomaterials for In Situ Tissue Regeneration: A Review

This review focuses on a somewhat unexplored strand of regenerative medicine, that is in situ tissue engineering. In this approach manufactured scaffolds are implanted in the injured region for regeneration within the patient. The scaffold is designed to attract cells to the required volume of regeneration to subsequently proliferate, differentiate, and as a consequence develop tissue within the scaffold which in time will degrade leaving just the regenerated tissue. This review highlights the wealth of information available from studies of ex-situ tissue engineering about the selection of materials for scaffolds. It is clear that there are great opportunities for the use of additive manufacturing to prepare complex personalized scaffolds and we speculate that by building on this knowledge and technology, the development of in situ tissue engineering could rapidly increase. Ex-situ tissue engineering is handicapped by the need to develop the tissue in a bioreactor where the conditions, however optimized, may not be optimum for accelerated growth and maintenance of the cell function. We identify that in both methodologies the prospect of tissue regeneration has created much promise but delivered little outside the scope of laboratory-based experiments. We propose that the design of the scaffolds and the materials selected remain at the heart of developments in this field and there is a clear need for predictive modelling which can be used in the design and optimization of materials and scaffolds.

Biomaterials for In Situ Tissue Regeneration: A Review

This review focuses on a somewhat unexplored strand of regenerative medicine, that is in situ tissue engineering. In this approach manufactured scaffolds are implanted in the injured region for regeneration within the patient. The scaffold is designed to attract cells to the required volume of regeneration to subsequently proliferate, differentiate, and as a consequence develop tissue within the scaffold which in time will degrade leaving just the regenerated tissue. This review highlights the wealth of information available from studies of ex-situ tissue engineering about the selection of materials for scaffolds. It is clear that there are great opportunities for the use of additive manufacturing to prepare complex personalized scaffolds and we speculate that by building on this knowledge and technology, the development of in situ tissue engineering could rapidly increase. Ex-situ tissue engineering is handicapped by the need to develop the tissue in a bioreactor where the conditions, however optimized, may not be optimum for accelerated growth and maintenance of the cell function. We identify that in both methodologies the prospect of tissue regeneration has created much promise but delivered little outside the scope of laboratory-based experiments. We propose that the design of the scaffolds and the materials selected remain at the heart of developments in this field and there is a clear need for predictive modelling which can be used in the design and optimization of materials and scaffolds.

The future application of nanomedicine and biomimicry in plastic and reconstructive surgery

Plastic surgery encompasses a broad spectrum of reconstructive challenges and prides itself upon developing and adopting new innovations. Practice has transitioned from microsurgery to supermicrosurgery with a possible future role in even smaller surgical frontiers. Exploiting materials on a nanoscale has enabled better visualization and enhancement of biological processes toward better wound healing, tumor identification and viability of tissues, all cornerstones of plastic surgery practice. Recent advances in nanomedicine and biomimicry herald further reconstructive progress facilitating soft and hard tissue, nerve and vascular engineering. These lay the foundation for improved biocompatibility and tissue integration by the optimization of engineered implants or tissues. This review will broadly examine each of these technologies, highlighting areas of progress that reconstructive surgeons may not be familiar with, which could see adoption into our armamentarium in the not-so-distant future.

Bioactive hydrogels for bone regeneration

Bone self-healing is limited and generally requires external intervention to augment bone repair and regeneration. While traditional methods for repairing bone defects such as autografts, allografts, and xenografts have been widely used, they all have corresponding disadvantages, thus limiting their clinical use. Despite the development of a variety of biomaterials, including metal implants, calcium phosphate cements (CPC), hydroxyapatite, etc., the desired therapeutic effect is not fully achieved. Currently, polymeric scaffolds, particularly hydrogels, are of interest and their unique configurations and tunable physicochemical properties have been extensively studied. This review will focus on the applications of various cutting-edge bioactive hydrogels systems in bone regeneration, as well as their advantages and limitations. We will examine the composition and defects of the bone, discuss the current biomaterials for bone regeneration, and classify recently developed polymeric materials for hydrogel synthesis. We will also elaborate on the properties of desirable hydrogels as well as the fabrication techniques and different delivery strategies. Finally, the existing challenges, considerations, and the future prospective of hydrogels in bone regeneration will be outlined.