Fabrication and characterization of carboxymethyl chitosan and tea polyphenols coating on zein nanoparticles to encapsulate β-carotene by anti-solvent precipitation method

Preparation, structural characterization, and functional attributes of zein-lysozyme-κ-carrageenan ternary nanocomposites for curcumin encapsulation

The low water solubility and inadequate bioavailability of curcumin significantly hinder its broad biological applications in the realms of food and medicine. There is limited information currently available regarding the particle characteristics and functional capabilities of zein-lysozyme-based nanomaterials. Thereby, the primary goal of the current work is to effectively develop innovative zein-lysozyme-κ-carrageenan complex nanocomposites (ZLKC) as a reliable carrier for curcumin encapsulation. As a result, ZLKC nanoparticles showed a smooth spherical nanostructure with improved encapsulation efficiency. Fourier-transform infrared, fluorescence spectroscopy, dissociation assay, and circular dichroism analysis revealed that hydrophobic and electrostatic interactions and hydrogen bonding were pivotal in the construction and durability of these composites. X-ray diffraction examination affirmed the lack of crystallinity in curcumin encapsulated within nanoparticles. The incorporation of κ-carrageenan significantly improved the physicochemical stability of ZLKC nanoparticles in diverse environmental settings. Additionally, ZLKC nanocomposites demonstrated enhanced antioxidant and antimicrobial properties, as well as sustained release characteristics. Therefore, these findings demonstrate the potential application of ZLKC nanocomposites as delivery materials for encapsulating bioactive substances.

Soybean isolate protein complexes with different concentrations of inulin by ultrasound treatment: Structural and functional properties

The effects of ultrasound and different inulin (INU) concentrations (0, 10, 20, 30, and 40 mg/mL) on the structural and functional properties of soybean isolate protein (SPI)-INU complexes were hereby investigated. Fourier transform infrared spectroscopy showed that SPI was bound to INU via hydrogen bonding. All samples showed a decreasing and then increasing trend of α-helix content with increasing INU concentration. SPI-INU complexes by ultrasound with an INU concentration of 20 mg/mL (U-2) had the lowest content of α-helix, the highest content of random coils and the greatest flexibility, indicating the proteins were most tightly bound to INU in U-2. Both UV spectroscopy and intrinsic fluorescence spectroscopy indicated that it was hydrophobic interactions between INU and SPI. The addition of INU prevented the exposure of tryptophan and tyrosine residues to form a more compact tertiary structure compared to SPI alone, and ultrasound caused further unfolding of the structure of SPI. This indicated that the combined effect of ultrasound and INU concentration significantly altered the tertiary structure of SPI. SDS-PAGE and Native-PAGE displayed the formation of complexes through non-covalent interactions between SPI and INU. The ζ-potential and particle size of U-2 were minimized to as low as -34.94 mV and 110 nm, respectively. Additionally, the flexibility, free sulfhydryl groups, solubility, emulsifying and foaming properties of the samples were improved, with the best results for U-2, respectively 0.25, 3.51 μmoL/g, 55.51 %, 269.91 %, 25.90 %, 137.66 % and 136.33 %. Overall, this work provides a theoretical basis for improving the functional properties of plant proteins.

Multi-spectroscopies and molecular docking insights into the interaction mechanism and antioxidant activity of isoquercetin and zein nanoparticles

The purpose of this study was to compare and characterize the theoretical properties and interaction mechanisms of zein and isoquercetin (ISO) from experimental and theoretical perspectives. Zein nanoparticles with different ISO concentrations (ZINPs) were prepared by the antisolvent precipitation method. The experimental results indicated all particles appeared spherical. When the mass ratio of zein to ISO was 10:1, the encapsulation efficiency of ZINPs reached 88.19 % with an average diameter of 126.67 nm. The multispectral method and molecular docking results confirmed that hydrogen bonding and van der Waals force played a dominant role for the binding of ISO to zein, and the primary fluorescence quenching mechanism for zein by ISO was static quenching. Furthermore, ZINPs had greater solubility and antioxidant activity, as well as inhibited the release of ISO during simulated gastrointestinal digestion processes. This research contributes to the understanding of the non-covalent binding mechanism between zein and ISO, providing a theoretical basis for the construction of ISO active carriers.

EGCG-based nanoparticles: synthesis, properties, and applications

(-)-Epigallocatechin-3-gallate (EGCG) is a natural phenolic substance found in foods and beverages (especially tea) that exhibits a broad spectrum of biological activities, including antioxidant, antimicrobial, anti-obesity, anti-inflammatory, and anti-cancer properties. Its potential in cardiovascular and brain health has garnered significant attention. However, its clinical application remains limited due to its poor physicochemical stability and low oral bioavailability. Nanotechnology can be used to improve the stability, efficacy, and pharmacokinetic profile of EGCG by encapsulating it within nanoparticles. This article reviews the interactions of EGCG with various compounds, the synthesis of EGCG-based nanoparticles, the functional attributes of these nanoparticles, and their prospective applications in drug delivery, diagnosis, and therapy. The potential application of nanoencapsulated EGCG in functional foods and beverages is also emphasized. Top-down and bottom-up approaches can be used to construct EGCG-based nanoparticles. EGCG-based nanoparticles exhibit enhanced stability and bioavailability compared to free EGCG, making them promising candidates for biomedical and food applications. Notably, the non-covalent and covalent interactions of EGCG with other substances significantly contribute to the improved properties of these nanoparticles. EGCG-based nanoparticles appear to have a wide range of applications in different industries, but further research is required to enhance their efficacy and ensure their safety.

Fabrication and characterization of pectin-zein nanoparticles containing tanshinone using anti-solvent precipitation method

Tanshinone compounds are secondary metabolites which their application in food and pharmaceutical industry is limited due to the low solubility in water and sensitivity to heat. This study aimed to develop a novel biopolymer nanocarriers system based on pectin/zein for the encapsulation of tanshinone compounds using the anti-solvent precipitation method. The concentration of pectin and mass ratio of tanshinone/zein in the final formulation of nanoparticles were optimized. According to the results, a pectin concentration of 1 g/L and a tanshinone/zein ratio of 0.1:1 g/g were considered the optimal nanoparticle formulation. The resulting nanoparticles exhibited a spherical core-shell structure, with approximate values for size, zeta potential, TSI, and encapsulation efficiency of 132 ± 0.002 nm, -38.6 ± 0.019 mV, 0.600 ± 0.084, and 79.41 ± 0.62 %, respectively. The FTIR test confirmed the presence of hydrophobic, hydrogen, and electrostatic interactions among the constituents within the nanoparticles. Additionally, XRD and DSC tests verified the amorphous nature of the nanoparticles. Morphological examination conducted through TEM, and SEM revealed the characteristics of the resulting nanoparticles. Furthermore, this carrier system significantly enhanced the solubility of tanshinone compounds in water.

Astaxanthin encapsulation in soybean protein isolate-sodium alginate complexes-stabilized nanoemulsions: antioxidant activities, environmental stability, and in vitro digestibility

BACKGROUND

Nanoemulsions (NEs) have been considered an effective carrier to protect environmentally labile bioactive compounds from degradation during food processing. Among the numerous types of NEs, biopolymer-stabilized NEs have gained much attention to achieve this function because of the extensive sources, biocompatibility, and tunability. Therefore, the antioxidant activities, environmental stability, and in vitro digestibility of astaxanthin (AST)-loaded soybean protein isolate (SPI)-alginate (SA) complexes-stabilized NEs (AST-SPI-SA-NEs) were investigated in this study.

RESULTS

The AST-SPI-SA-NEs exhibited an encapsulation efficiency of 88.30 ± 1.67%, which is greater than that of the AST-loaded SPI-stabilized NEs (AST-SPI-NEs) (77.31 ± 0.83%). Both AST-SPI-SA-NEs and AST-SPI-NEs exhibited significantly stronger hydroxyl or diphenylpicryl-hydrazyl radical-scavenging activities than the free AST. The formation of SPI-SA complexes strengthened the thermal, light, and storage stability of AST-SPI-SA-NEs with no apparently increasing mean diameter (around 200 nm). AST-SPI-SA-NEs also exhibited a better freeze-thaw dispersibility behavior than AST-SPI-NEs. AST-SPI-SA-NEs were more stable than AST-SPI-NEs were under in vitro gastrointestinal digestion conditions and exhibited a greater bioaccessibility (47.92 ± 0.42%) than both AST-SPI-NEs (12.97 ± 1.33%) and free AST (7.87 ± 0.37%). Hydrogen bonding was confirmed to participate in the formation of AST-SPI-SA-NEs and AST-SPI-NEs based on the molecular docking results.

CONCLUSIONS

The construction of SPI-SA-NEs is conducive to the encapsulation, protection, and absorption of AST, providing a promising method for broadening the application of AST in processed foods or developing novel ingredients of functional foods. © 2023 Society of Chemical Industry.

Nano-Drug Delivery Systems Based on Natural Products

Natural products have proven to have significant curative effects and are increasingly considered as potential candidates for clinical prevention, diagnosis, and treatment. Compared with synthetic drugs, natural products not only have diverse structures but also exhibit a range of biological activities against different disease states and molecular targets, making them attractive for development in the field of medicine. Despite advancements in the use of natural products for clinical purposes, there remain obstacles that hinder their full potential. These challenges include issues such as limited solubility and stability when administered orally, as well as short durations of effectiveness. To address these concerns, nano-drug delivery systems have emerged as a promising solution to overcome the barriers faced in the clinical application of natural products. These systems offer notable advantages, such as a large specific surface area, enhanced targeting capabilities, and the ability to achieve sustained and controlled release. Extensive in vitro and in vivo studies have provided further evidence supporting the efficacy and safety of nanoparticle-based systems in delivering natural products in preclinical disease models. This review describes the limitations of natural product applications and the current status of natural products combined with nanotechnology. The latest advances in nano-drug delivery systems for delivery of natural products are considered from three aspects: connecting targeting warheads, self-assembly, and co-delivery. Finally, the challenges faced in the clinical translation of nano-drugs are discussed.

Sodium alginate and chitosan co-modified fucoxanthin liposomes: preparation, bioaccessibility and antioxidant activity

To improve the stability of fucoxanthin, fucoxanthin liposomes (L) were prepared by the thin-film ultrasound method, and fucoxanthin liposomes were modified with sodium alginate and chitosan by an electrostatic deposition method. The release characteristics of fucoxanthin in different types of liposomes with in vitro gastrointestinal simulation were studied. Under the optimum conditions, the results showed that the encapsulation efficiency of prepared liposomes could reach 88.56 ± 1.40% (m/m), with an average particle size of 295.27 ± 7.28 nm, a Zeta potential of -21.53 ± 2.00 mV, a polydispersity index (PDI) of 0.323 ± 0.007 and a loading capacity of 33.3 ± 0.03% (m/m). Compared with L and chitosan modified fucoxanthin liposomes (CH), sodium alginate and chitosan modified fucoxanthin liposomes (SA-CH) exhibited higher storage stability, in vitro bioaccessibility and antioxidant activity after gastrointestinal digestion. Sodium alginate and chitosan co-modified liposomes can be developed as formulations for encapsulation and delivery of functional ingredients, providing a theoretical basis for developing new fucoxanthin series products.

Comprehensive Update on Carotenoid Colorants from Plants and Microalgae: Challenges and Advances from Research Laboratories to Industry

The substitution of synthetic food dyes with natural colorants continues to be assiduously pursued. The current list of natural carotenoid colorants consists of plant-derived annatto (bixin and norbixin), paprika (capsanthin and capsorubin), saffron (crocin), tomato and gac fruit lycopene, marigold lutein, and red palm oil (α- and β-carotene), along with microalgal Dunaliella β-carotene and Haematococcus astaxanthin and fungal Blakeslea trispora β-carotene and lycopene. Potential microalgal sources are being sought, especially in relation to lutein, for which commercial plant sources are lacking. Research efforts, manifested in numerous reviews and research papers published in the last decade, have been directed to green extraction, microencapsulation/nanoencapsulation, and valorization of processing by-products. Extraction is shifting from conventional extraction with organic solvents to supercritical CO2 extraction and different types of assisted extraction. Initially intended for the stabilization of the highly degradable carotenoids, additional benefits of encapsulation have been demonstrated, especially the improvement of carotenoid solubility and bioavailability. Instead of searching for new higher plant sources, enormous effort has been directed to the utilization of by-products of the fruit and vegetable processing industry, with the application of biorefinery and circular economy concepts. Amidst enormous research activities, however, the gap between research and industrial implementation remains wide.

Pickering emulsions prepared using zein-sugarcane leaves polyphenol covalent crosslinking nanoparticles via ultrasonication: Capacities in storage stability, lipid oxidation, in vitro digestion and safety evaluation

This study firstly used sugarcane leaf polyphenols (SGLp) to modify zein to form covalent nanoparticles (SGLpZ) and used SGLpZ as an emulsifier to stabilize pickering emulsions (SZP) via ultrasonic method. The results showed that the addition of SGLp could alter the physicochemical properties of zein, including improving increasing the hydrophilicity of zein and the antioxidant properties of zein (three basic antioxidant activities test in vitro). SGLpZ could be able to form a dense film on the surface of the pickering emulsions which inhibited lipid oxidation as the concentration of SGLp increased at 4 ℃ for 20 days, thus stabilizing pickering emulsions (SZP). Further assessment of storage stability of pickering emulsions stabilized by SGLp was evaluated via measuring the free fatty acids (FFA) release in vitro gastrointestinal digestion. The results showed that the FFA release of SZP decreased from 20.61 ± 0.10% to 16.14 ± 0.69%. In addition, SGLp gave SZP a yellow color, which inspired that SZP could be used in the food industry to make yellow-colored functional foods. Finally, the safety of SZP initially assessed by in-vitro hemocompatibility and cytotoxicity (MTT) assays. In conclusion, our fingdings were beneficial for the further design and development of SGLp in food fields and enabled the development a new type in functional protein-plant polyphenols food pickering emulsions.

Fabrication of carboxymethyl chitosan films for cheese packaging containing gliadin-carboxymethyl chitosan nanoparticles co-encapsulating natamycin and theaflavins

In this study, gliadin-carboxymethyl chitosan composite nanoparticles (GC NPs) co-encapsulated natamycin (Nata) and theaflavins (TFs) were constructed and added as an antioxidant, antifungal, and structural enhancer to carboxymethyl chitosan (CMCS) films. The stabilized GC NPs with a particle size of 160.7 ± 2.8 nm, a zeta potential of -29.0 ± 0.9 mV, and a protein content in the supernatant of 96 ± 1 % could be fabricated. Tests of pH and salt ions showed that the stability of NPs dispersion was based on electrostatic repulsion. Co-encapsulation of TFs enhanced the photostability of Nata and the antioxidant activity of the NPs dispersion. The interactions between gliadin with Nata and TFs were studied by molecular simulations. As a functional additive, the addition of Nata/TFs-GC NPs could improve the optical properties, mechanical properties, water-blocking capability, and antifungal and antioxidant activities of the CMCS films. The in-vivo test showed that the functional film could be used to inhibit the growth of Aspergillus niger on cheese.

Investigating of zein-gum arabic-tea polyphenols ternary complex nanoparticles for luteolin encapsulation: Fabrication, characterization, and functional performance

Luteolin has extensive biological effects, but its low water-solubility and oral bioavailability have restricted its application. In this study, we successfully prepared new zein-gum arabic (GA)-tea polyphenols (TP) ternary complex nanoparticles (ZGTL) as a delivery system to encapsulate luteolin using an anti-solvent precipitation method. Consequently, ZGTL nanoparticles showed negatively charged smooth spherical structures with smaller particle size and higher encapsulation ability. X-ray diffraction revealed the amorphous state of luteolin in the nanoparticles. Hydrophobic, electrostatic, and hydrogen bonding interactions contributed to the formation and stability of ZGTL nanoparticles, as indicated by fluorescence and Fourier transform infrared spectra analyses. The inclusion of TP improved the physicochemical stability and luteolin retention rate of ZGTL nanoparticles by forming more compact nanostructures under different environmental conditions, including pH, salt ion concentration, temperature, and storage. Additionally, ZGTL nanoparticles exhibited stronger antioxidant activity and better sustainable release capacity under simulated gastrointestinal conditions due to TP incorporation. These findings demonstrate that ZGT complex nanoparticles have potential applications as an effective delivery system for encapsulating bioactive substances in food and medicine fields.

The effect of sweet tea polysaccharide on the physicochemical and structural properties of whey protein isolate gels

In this study, we investigated the effect of sweet tea polysaccharide (STP) on the physicochemical and structural properties of heat-induced whey protein isolate (WPI) gels, and explored the potential mechanism. The results indicated that STP promoted the unfolding and cross-linking of WPI to form a stable three-dimensional network structure, and significantly improved the strength, water-holding capacity and viscoelasticity of WPI gels. However, the addition of STP was limited to 2 %, too much STP would loosen the gel network and affect the gel properties. The results of FTIR and fluorescence spectroscopy suggested that STP affected the secondary and tertiary structures of WPI, promoted the movement of aromatic amino acids to the protein surface and the conversion of α-helix to β-sheet. In addition, STP reduced the surface hydrophobicity of the gel, increased the free sulfhydryl content, and enhanced the hydrogen bonding, disulfide bonding, and hydrophobic interactions between protein molecules. These findings can provide a reference for the application of STP as a gel modifier in the food industry.

Zein nanoparticles for drug delivery: Preparation methods and biological applications

Zein, a vegetable protein extracted from corn (Zea mays L.), forms a gastro-resistant and mucoadhesive polymer that is cheap and easy to obtain and facilitates the encapsulation of bioactives with hydrophilic, hydrophobic, and amphiphilic properties. The methods used for synthesizing these nanoparticles include antisolvent precipitation/nanoprecipitation, pH-driven, electrospraying, and solvent emulsification-evaporation methods. Each method has its advantages in the preparation of nanocarriers, nevertheless, all of them enable the production of zein nanoparticles that are stable and resistant to environmental factors, with different biological activities required in the cosmetic, food, and pharmaceutical industries. Therefore, zein nanoparticles are promising nanocarriers that can encapsulate various bioactives with anti-inflammatory, antioxidant, antimicrobial, anticancer, and antidiabetic properties. This article reviews the principal methods for obtaining zein nanoparticles containing bioactives, the advantages and characteristics of each method, as well as the main biological applications of nanotechnology-based formulations.

Protein-polysaccharides based nanoparticles for loading with Malus baccata polyphenols and their digestibility in vitro

The poor solubility, instability and low absorption rate obstruct the bioavailability of polyphenols isolated from Malus baccata (MBP) during gastrointestinal digestion. In order to solve the limitable problems, the food-grade nanoparticles were fabricated by mucin (MC) and Hohenbuehelia serotina polysaccharides (HSP) for delivery of MBP (MBP-NPs). The physicochemical properties and morphology of MBP-NPs prepared by different condition were respectively characterized. During gastrointestinal digestion in vitro, the release characteristic and variation in phenolic composition of MBP-NPs were evaluated. The results showed that MBP-NPs formed by hydrogen bonding and hydrophobic interaction possessed the regularly spherical shapes and smooth surfaces and semi-crystalline properties. Moreover, MBP-NPs presented the excellent physicochemical stability. During simulated gastrointestinal digestion in vitro, MBP-NPs exhibited the sustained release characteristics of phenolic compounds, which were confirmed by SDS-PAGE measurement. Compared with that of unencapsulated MBP, the significant variation was occurred in the phenolic composition of MBP-NPs, indicating that MBP-NPs could prevent the degradation and transformation of phenolic compounds. This study provides a novel strategy to improve the bioavailability of polyphenols.

Efficient Utilization of Tea Resources through Encapsulation: Dual Perspectives from Core Material to Wall Material

With the high production and consumption of tea around the world, efficient utilization of tea byproducts (tea pruning, tea residues after production, and drinking) is the focus of improving the economy of the tea industry. This review comprehensively discusses the efficient utilization of tea resources by encapsulation from the dual perspectives of core material and wall material. The core material is mainly tea polyphenols, followed by tea oils. The encapsulation system for tea polyphenols includes microcapsules, nanoparticles, emulsions, gels, conjugates, metal-organic frameworks, liposomes, and nanofibers. In addition, it is also diversified for the encapsulation of tea oils. Tea resources as wall materials refer to tea saponins, tea polyphenols, tea proteins, and tea polysaccharides. The application of the tea-based delivery system widely involves functionally fortified food, meat preservation, film, medical treatment, wastewater treatment, and plant protection. In the future, the coencapsulation of tea resources as core materials and other functional ingredients, the precise targeting of these tea resources, and the wide application of tea resources in wall materials need to be focused on. In conclusion, the described technofunctional properties and future research challenges in this review should be followed.

Hierarchically Porous Films Architectured by Self-Assembly of Prolamins at the Air-Liquid Interface

Artificial recapitulation of hierarchically porous films gained great interest due to their versatile functionalities and applications. However, the development of novel eco-friendly and nontoxic biopolymer-based porous films is still limited by the time-consuming fabrication processes and toxic organic reagents involved. Here, we reported a novel approach to rapidly (within 5 s) fabricate biopolymer-based hierarchically porous films via inducing the laterally occurring interfacial self-assembly of prolamins at the air-liquid interface during an antisolvent dripping procedure. The as-prepared films exhibited a hierarchically porous microstructure (with sizes of about 500 nm to 5 μm) with location-graded and Janus features. The formation mechanism involved the solvent gradient controlled self-assembly of prolamin into an anisotropic defect structure in longitudinal and lateral directions. Accordingly, the macroscopic morphologies together with the porosity and pore size could be precisely tuned by solvents and operating parameters in a convenient way. Furthermore, alcohol-soluble but water-insoluble bioactive compounds could be incorporated simultaneously via a one-step loading procedure, which endowed films with large loading efficiency and sustained release features suitable for controlled release applications. The effect of the curcumin-loaded porous film on skin wound healing, as one of the potential applications of this novel material, was then investigated in vivo in a full-thickness wound model, wherein satisfying wound healing effects were achieved through multitarget and multipathway mechanisms. This pioneering work offers a novel strategy for the rapid architecture of biopolymer-based hierarchically porous film with versatile application potentials.

Physicochemical properties, antioxidant activities and in vitro sustained release behaviour of co-encapsulated liposomes as vehicle for vitamin E and β-carotene

BACKGROUND

In this study the potential of liposomes as a vitamin E (VE) and β-carotene (βC) delivery system was examined. The co-encapsulated liposomes of βC and VE (L-VE-βC) were prepared and characterized. Their antioxidant properties were evaluated by free radical scavenging activities of 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS), hydroxyl radical and lipid peroxidation assay. The in vitro sustained release behaviour was then investigated and discussed.

RESULTS

VE and βC were co-encapsulated in liposomes with high encapsulation efficiency, up to 92.49% and 86.16% for βC and VE, respectively. The antioxidant activities of L-VE-βC samples were significantly higher than that of single loaded liposome. Among different ratios of VE/βC, L-VE-βC at 5:3 exhibited the highest radical scavenging rates, with 66.80%, 56.58% and 34.39% for DPPH, ABTS and OH radical, respectively. L-VE-βC samples also had a good ability to inhibit lipid peroxidation, especially the sample with ratios of VE/βC at 5:3 and 3:1. In simulated gastrointestinal release, L-VE-βC exhibited an excellent sustained release behaviour in SGF with the accumulated rate at about 20%, while the release rate in SIF increased to over 80%, where they should be absorbed. The release kinetics analysis indicated that βC was released in the Higuchi model in stomach, and the Korsmeyr-Peppas model in intestine.

CONCLUSION

Compared to single loaded liposomes, the combined-loaded liposomes exhibited higher antioxidant activity and bioavailability, suggesting the potential applications in functional foods. © 2022 Society of Chemical Industry.

Fabrication of chitosan-protocatechuic acid conjugates to inhibit lipid oxidation and improve the stability of β-carotene in Pickering emulsions: Effect of molecular weight of chitosan

In this study, chitosan (CS) with different molecular weights was functionalized with protocatechuic acid (PA) by free-radical grafting reaction, and used for the inhibition of lipid oxidation and the enhancement of stability of β-carotene in Pickering emulsions. The order of grafting ratio of PA in CS-PA conjugates was CS400 (400 kDa CS) > CS200 (200 kDa CS) > CS100 (100 kDa CS). UV-vis, FT-IR and ¹H NMR spectra proved that PA was covalently bonded to CS through amino and ester linkages. Compared with native CS, three CS-PA conjugates exhibited reduced crystallinity and thermal stability and improved antioxidant activity, with a molecular weight-dependent relationship. Besides, CS-PA-conjugate particles formed by ionic gelling procedure were spherically shaped and homogeneously dispersed, which substantially improved the stability of β-carotene in Pickering emulsions than CS particles under ultraviolet irradiation, natural light exposure and heat treatment, and the retention rates of β-carotene were in the following order: CS200-PA- > CS400-PA- > CS100-PA-conjugate particles. Furthermore, the oxidation stability of Pickering emulsions fabricated by CS-PA-conjugate particles was also higher than that of CS particles. These results will provide valuable information for the application of CS-PA conjugates to protect bioactive components and inhibit lipid oxidation in emulsion systems.

Zein-based nano-delivery systems for encapsulation and protection of hydrophobic bioactives: A review

Zein is a kind of excellent carrier materials to construct nano-sized delivery systems for hydrophobic bioactives, owing to its unique interfacial behavior, such as self-assembly and packing into nanoparticles. In this article, the chemical basis and preparation methods of zein nanoparticles are firstly reviewed, including chemical crosslinking, emulsification/solvent evaporation, antisolvent, pH-driven method, etc., as well as the pros and cons of different preparation methods. Various strategies to improve their physicochemical properties are then summarized. Lastly, the encapsulation and protection effects of zein-based nano-sized delivery systems (e.g., nanoparticles, nanofibers, nanomicelles and nanogels) are discussed, using curcumin as a model bioactive ingredient. This review will provide guidance for the in-depth development of hydrophobic bioactives formulations and improve the application value of zein in the food industry.

Recent progresses in the delivery of β-carotene: From nano/microencapsulation to bioaccessibility

Beta-carotene (BC) as an efficient pro-vitamin is effective in improving vision, immune system and cognitive function as well as preventing coronary diseases and cancer. However, besides its poor chemical stability, the high lipophilic nature of BC reduces its dispersibility and consequently bioavailability which limits its application into food, pharmaceutical and nutraceuticals. Different carriers with vesicular or particulate structures have been studied and utilized for promoting BC solubility, dispersibility, and protection against diverse operational or environmental stresses and also controlling BC release and subsequent bioaccessibility. The current study, therefore reviews different micro/nanocarriers reported on BC encapsulation with special focusing on its bioavailability. Liposomal structures have been successfully used for enhancing BC stability and bioavailability. Besides, emulsion-based carriers including Pickering emulsions, nanoemulsions and microemulsions have been widely evaluated for BC encapsulation and protection. In addition, lipid-based nanoparticles and nanostructural carriers have also been applied successfully for this context. Moreover, gel structures including emulgels, hydrogels and oleogels are studied in some researches. Most of these delivery systems led to higher hydro-solubility and dispersibility of BC which consequently increased its bioavailability; thereupon could promote its application into food, cosmetic and nutraceutical products. However, for remarkable incorporation of BC and other bioactive compounds into edible products, the safety and toxicological aspects of these delivery system especially those designed in nano scale should be addressed in the further researches.

Fabrication of alkali lignin-based emulsion electrospun nanofibers for the nanoencapsulation of beta-carotene and the enhanced antioxidant property

For the greater utilization of β-carotene in antioxidant material, β-carotene-loaded emulsion stabilized by alkali lignin (AL) was successfully electrospinning with poly (vinyl alcohol) (PVA) (PVA/AL/β-carotene nanofiber). Transmission electron microscopy demonstrated the core-shell structure of nanofiber with the average diameter being 356.31 nm, and 85.7 % of β-carotene was effectively encapsulated into the core section. Fourier transform infrared spectra and differential scanning calorimetry revealed the good compatibility and decreased crystallinity of β-carotene, favoring its stability and solubility, respectively. As expected, the PVA/AL/β-carotene nanofiber exhibited higher antioxidant activity than free β-carotene due to the protection of AL matrix and the special structure of nanofiber, as the DPPH free radical scavenging rate being 90.7 % at 7th day. The sustained release behavior of β-carotene and AL from fiber followed Fickian diffusion model, contributing to the greater protection for fish oil than that of emulsion. Thus, this study provides an approach to develop hydrophobic compounds-loaded emulsion electrospun antioxidant material with controlled release property and enhanced activity.

Gastro-Resistant Microparticles Produced by Spray-Drying as Controlled Release Systems for Liposoluble Vitamins

In the present study, gastro-resistant microparticles (MPs) were produced using the spray-drying technique as controlled-release systems for some model liposoluble vitamins, including retinyl-palmitate, retinyl-acetate, β-carotene, cholecalciferol and α-tocopherol. The gastroprotective action of three different gastro-resistant excipients, the anionic methacrylic copolymer (Eudraguard^®® Biotic, E1207), the cellulose acetate phthalate (CAP) and whey proteins (WPs), was compared. The latter was used to produce a novel delivery system manufactured with only food-derived components, such as milk, and showed several improvements over the two synthetic gastro-resistant agents. Scanning electron microscopy (SEM) images showed a quite homogeneous spherical shape of all microparticle batches, with an average diameter between 7 and 15 μm. FTIR analysis was used to evaluate the effective incorporation of vitamins within the microparticles and the absence of any degradation to the components of the formulation. The comparison graphs of differential scanning calorimetry (DSC) confirmed that the spray drying technique generates a solid in which the physical interactions between the excipients and the vitamins are very strong. Release studies showed a prominent pH-controlled release and partially a delayed-release profile. Ex vivo permeation studies of retinyl palmitate, retinyl acetate and α-tocopherol revealed greater transmucosal permeation capacity for microparticles produced with the WPs and milk.

Nano-enabled plant-based colloidal delivery systems for bioactive agents in foods: Design, formulation, and application

Consumers are becoming increasingly aware of the impact of their dietary choices on the environment, animal welfare, and health, which is causing many of them to adopt more plant-based diets. For this reason, many sectors of the food industry are reformulating their products to contain more plant-based ingredients. This article describes recent research on the formation and application of nano-enabled colloidal delivery systems formulated from plant-based ingredients, such as polysaccharides, proteins, lipids, and phospholipids. These delivery systems include nanoemulsions, solid lipid nanoparticles, nanoliposomes, nanophytosomes, and biopolymer nanoparticles. The composition, size, structure, and charge of the particles in these delivery systems can be manipulated to create novel or improved functionalities, such as improved robustness, higher optical clarity, controlled release, and increased bioavailability. There have been major advances in the design, assembly, and application of plant-based edible nanoparticles within the food industry over the past decade or so. As a result, there are now a wide range of different options available for creating delivery systems for specific applications. In the future, it will be important to establish whether these formulations can be produced using economically viable methods and provide the desired functionality in real-life applications.

Covalent modification of zein with polyphenols: A feasible strategy to improve antioxidant activity and solubility

Covalent modification of protein with polyphenols is an attractive research topic, since it is an effective way to improve the properties and broaden the applications of protein. However, the majority of prolamin-polyphenol reactions were carried out in alcohol aqueous solution, and this study aimed to investigate the covalent interaction of zein and polyphenols in water. Chlorogenic acid (CGA), gallic acid (GA), and caffeic acid (CA) were used as polyphenol models. The grafting ratio revealed that zein interacted more strongly with CGA and CA than with GA, which was probably due to the larger molecular weight of CGA and the hydroxycinnamic acid structure of CA. Afterward, the differences in structural and functional properties between control zein and zein-polyphenol complexes were compared. Covalent interaction with polyphenols induced great changes in the morphology and secondary structure of zein. Compared with control zein and non-covalent complexes, covalent zein-polyphenol complexes exhibited better solubility, antioxidant activity, and thermal stability. PRACTICAL APPLICATION: Covalent modification of zein with polyphenols in water is a simple and efficient method, which can ameliorate the antioxidant activity as well as the hydrophilicity of zein and improve its application value. The findings of this research carry important implications for using zein-polyphenol complexes as novel food additives, or to design more efficient delivery systems.

Rational Fabrication of Folate-Conjugated Zein/Soy Lecithin/Carboxymethyl Chitosan Core-Shell Nanoparticles for Delivery of Docetaxel

The objective of this work is to design and fabricate a natural zein-based nanocomposite with core-shell structure for the delivery of anticancer drugs. As for the design, folate-conjugated zein (Fa-zein) was synthesized as the inner hydrophobic core; soy lecithin (SL) and carboxymethyl chitosan (CMC) were selected as coating components to form an outer shell. As for fabrication, a novel and appropriate atomizing/antisolvent precipitation process was established. The results indicated that Fa-zein/SL/CMC core-shell nanoparticles (FZLC NPs) were successfully produced at a suitable mass ratio of Fa-zein/SL/CMC (100:30:10) and the freeze-dried FZLC powder showed a perfect redispersibility and stability in water. After that, docetaxel (DTX) as a model drug was encapsulated into FZLC NPs at different mass ratios of DTX to FZLC (MR). When MR = 1:15, DTX/FZLC NPs were obtained with high encapsulation efficiency (79.22 ± 0.37%), small particle size (206.9 ± 48.73 nm), and high zeta potential (-41.8 ± 3.97 mV). DTX was dispersed in the inner core of the FZLC matrix in an amorphous state. The results proved that DTX/FZLC NPs could increase the DTX dissolution, sustain the DTX release, and enhance the DTX cytotoxicity significantly. The present study provides insight into the formation of zein-based complex nanocarriers for the delivery of anticancer drugs.

Enhanced stability of stilbene-glycoside-loaded nanoparticles coated with carboxymethyl chitosan and chitosan hydrochloride

Stilbene-glycoside (THSG) is a promising dietary supplement with remarkable biological properties, however, its poor stability and low oral bioavailability hinder its application as an ingredient in functional foods. Herein, stilbene-glycoside-loaded nanoparticles (THSG-NPs) coated with carboxymethyl chitosan (CMC) and chitosan hydrochloride (CHC) using a complex coacervation method were successfully prepared for enhancing the stability of THSG. The optimized preparation parameters were 2.5 mg/mL CMC, 1.0 mg/mL CHC, 1.5 mg/mL THSG and preparation temperature of 25 °C, under which the experimentally designed particles averaged 381.9 nm with encapsulation efficiency (EE) of 68.6%. Solid-state characterization was assessed by Fourier transform infrared spectroscope and Differential scanning calorimetry. THSG-NPs showed significant protective effects against heat and solar radiation and exhibited remarkable pH-dependent and controlled release. This work demonstrated that enhanced stability and delayed release of THSG could be achieved using THSG-NPs, which could contribute to its potential application in the functional foods industry.

Poly (Lactic-Co-Glycolic) Acid–Poly (Vinyl Pyrrolidone) Hybrid Nanoparticles to Improve the Efficiency of Oral Delivery of β-Carotene

The aim of this study was to develop a nanoparticle formulation made of poly (vinyl pyrrolidone) (PVP) and poly (lactic-co-glycolic) acid (PLGA) for the oral delivery of β-carotene (BC). The hybrid nanoparticles were prepared by the interfacial deposition method, and the physicochemical properties of this formulation were characterized in terms of its morphology, particle size, size distribution, encapsulation efficiency, dissolution, intestinal permeability, and in vivo pharmacokinetics. Our results demonstrated that BC-loaded nanoformulation and PLGA nanoparticles (PNP) significantly enhanced a release 6.1 times higher than BC suspension. The fortification of PVP into PLGA nanoparticles, named PLGA–PVP hybrid nanoparticles (PPNP), significantly reduced the particle size, as well as led to an increase 1.9 times higher in the in vitro release of BC, compared with PNP. For the ex vivo intestinal permeability assessment, PNP and PPNP–K15 significantly enhanced the intestinal permeability by 2.7 and 6.5 times at the jejunum, and 2.3 and 4.5 times at the ileum, when compared with unformulated BC. According to the pharmacokinetic study, the optimized hybrid formulation significantly increased the peak plasma concentration (C_max) and the area under the curve (AUC_0-t), and the oral relative bioavailability showed a five-fold enhancement compared with that of the BC suspension. Our results indicate that the hybrid nanoparticulate delivery system is an efficient strategy for the oral delivery of BC.

Soy Protein Isolate/Sodium Alginate Microparticles under Different pH Conditions: Formation Mechanism and Physicochemical Properties

The effects of sodium alginate (SA) and pH value on the formation, structural properties, microscopic morphology, and physicochemical properties of soybean protein isolate (SPI)/SA microparticles were investigated. The results of ζ-potential and free sulfhydryl (SH) content showed electrostatic interactions between SPI and SA, which promoted the conversion of free SH into disulfide bonds within the protein. The surface hydrophobicity, fluorescence spectra, and Fourier transform infrared spectroscopy data suggested that the secondary structure and microenvironment of the internal hydrophobic groups of the protein in the SPI/SA microparticles were changed. Compared with SPI microparticles, the surface of SPI/SA microparticles was smoother, the degree of collapse was reduced, and the thermal stability was improved. In addition, under the condition of pH 9.0, the average particle size of SPI/SA microparticles was only 15.92 ± 0.66 μm, and the distribution was uniform. Rheological tests indicated that SA significantly increased the apparent viscosity of SPI/SA microparticles at pH 9.0. The maximum protein solubility (67.32%), foaming ability (91.53 ± 1.12%), and emulsion activity (200.29 ± 3.38 m²/g) of SPI/SA microparticles occurred at pH 9.0. The application of SPI/SA microparticles as ingredients in high-protein foods is expected to be of great significance in the food industry.

A review of factors affecting the stability of zein-based nanoparticles loaded with bioactive compounds: from construction to application

Zein-based nanoparticles loaded with bioactive compounds have positive prospects in the food industry, but an important limiting factor for development is colloidal instability. Currently, extensive researches are focused on solving the instability of zein nanoparticles, but since the beginning of the studies, there has not been a summary of the factors affecting the stability of zein-based nanoparticles. In the present work, the factors were reviewed comprehensively from the perspective of carrier construction and application evaluation. The former mainly includes type, quantity, and characteristics of biopolymer, the mass ratio of biopolymer/bioactive compound to zein, blending sequence of biopolymer, and location of encapsulated bioactive compounds. The latter mainly includes pH, heating, ionic strength, storage, freeze-drying, and gastrointestinal digestion. The former is the prerequisite for the success of the latter. The challenge is that stability research is limited to the laboratory level, and it is difficult to ensure that the stability results are suitable for commercial food matrices due to their complexity. At the laboratory level, the future trends are the influence of external energy and the cross-complexity and uniformity of stability research. The review is expected to provide systematic understanding and guidance for the development of zein-based nanoparticles stability.

Enhanced Stability and Oral Bioavailability of Cannabidiol in Zein and Whey Protein Composite Nanoparticles by a Modified Anti-Solvent Approach

Wide applications of cannabidiol (CBD) in the food and pharmaceutical industries are limited due to its low bioavailability, sensitivity to environmental pressures and low water solubility. Zein nanoparticles were stabilized by whey protein (WP) for the delivery of cannabidiol (CBD) using a modified anti-solvent approach. Particle size, surface charge, encapsulation efficiency, and re-dispersibility of nanoparticles were influenced by the zein to WP ratio. Under optimized conditions at 1:4, zein–WP nanoparticles were fabricated with CBD (200 μg/mL) and further characterized. WP absorbed on zein surface via hydrogen bond, hydrophobic forces, and electrostatic attraction. The zein–WP nanoparticles showed excellent storage stability (4 °C, dark) and effectively protected CBD degradation against heat and UV light. In vivo pharmacokinetic study demonstrated that CBD in zein–WP nanoparticles displayed 2-times and 1.75-fold enhancement in maximum concentration (C max) and the area under curve (AUC) as compared to free-form CBD. The data indicated the feasibility of developing zein–WP based nanoparticles for the encapsulation, protection, and delivery of CBD.

Kinetic Study of Encapsulated β-Carotene Degradation in Aqueous Environments: A Review

The provitamin A activity of β-carotene is of primary interest to address one of the world’s major malnutrition concerns. β carotene is a fat-soluble compound and its bioavailability from natural sources is very poor. Hence, studies have been focused on the development of specific core/shell micro- or nano-structures that encapsulate β-carotene in order to allow its dispersion in liquid systems and improve its bioavailability. One key objective when developing these structures is also to accomplish β-carotene stability. The aim of this review is to collect kinetic data (rate constants, activation energy) on the degradation of encapsulated β-carotene in order to derive knowledge on the possibility for these systems to be scaled-up to the industrial production of functional foods. Results showed that most of the nano- and micro-structures designed for β-carotene encapsulation and dispersion in the water phase provide better protection with respect to a natural matrix, such as carrot juice, increasing the β-carotene half-life from about 30 d to more than 100 d at room temperature. One promising approach to increase β-carotene stability was found to be the use of wall material, surfactants, or co-encapsulated compounds with antioxidant activity. Moreover, a successful approach was the design of structures, where the core is partially or fully solidified; alternatively, either the core or the interface or the outer phase are gelled. The data collected could serve as a basis for the rational design of structures for β-carotene encapsulation, where new ingredients, especially the extraordinary natural array of hydrocolloids, are applied.

Establishment and Characterization of Stable Zein/Glycosylated Lactoferrin Nanoparticles to Enhance the Storage Stability and in vitro Bioaccessibility of 7,8-Dihydroxyflavone

In this work, the lactoferrin (LF) was glycosylated by dextran (molecular weight 10, 40, and 70 kDa, LF 10K, LF 40K, and LF 70K) via Maillard reaction as a stabilizer to establish zein/glycosylated LF nanoparticles and encapsulate 7,8-dihydroxyflavone (7,8-DHF). Three zein/glycosylated LF nanoparticles (79.27–87.24 nm) with low turbidity (<0.220) and polydispersity index (PDI) (<0.230) were successfully established by hydrophobic interactions and hydrogen bonding. Compared with zein/LF nanoparticles, zein/glycosylated LF nanoparticles further increased stability to ionic strength (0–500 mM NaCl) at low pH conditions. Zein/glycosylated LF nanoparticles had nanoscale spherical shape and glycosylated LF changed surface morphology of zein nanoparticles. Besides, encapsulated 7,8-DHF exhibited an amorphous state inside zein/glycosylated LF nanoparticles. Most importantly, zein/glycosylated LF nanoparticles had good water redispersibility, high encapsulation efficiency (above 98.50%), favorable storage stability, and bioaccessibility for 7,8-DHF, particularly LF 40K. Collectively, the above research provides a theoretical reference for the application of zein-based delivery systems.

Fabrication and characterization of quercetin loaded casein phosphopeptides-chitosan composite nanoparticles by ultrasound treatment: Factor optimization, formation mechanism, physicochemical stability and antioxidant activity

Ultrasound treatment was used to successfully prepare Quercetin (Qu)-loaded Casein phosphopeptides (CPP)/chitosan (CS) nanoparticles. Compared with the control, the above ternary nanoparticles with the smallest size (241.27 nm, decreased by 34.32%), improved encapsulation efficiency of Qu (78.55%, increased by 22.12%) when prepared under following conditions: ultrasonic frequency, 20/35/50 kHz; the power density, 80 W/L; the time, 20 min, and the intermittent ratio, 20 s/5s. Electrostatic interactions, hydrogen bonding, and hydrophobic interactions were the main driving forces for nanoparticles formulation, which were strengthened by ultrasound treatment. The compact, homogeneous and spherical composite nanoparticles obtained by sonication were clearly observed by scanning electron microscope and atomic force microscope. The environmental stability (NaCl, pH, exposure time, storage time, and simulated gastrointestinal digestion) and antioxidant activity of the ternary nanoparticles were remarkably enhanced after ultrasonic treatment. Furthermore, the ternary nanoparticles prepared by ultrasound exhibited excellent stability in simulated gastrointestinal digestion. The above results indicate that ultrasound not only increases the loading of the nanoparticles on bioactive substances but also improves the environmental stability and antioxidant activity of the formed nanoparticles. Ultrasound-assisted preparation of nanoparticles loaded with bioactive substances could be well used in the functional food and beverage industry.