Disturbance-Promoted Unconventional and Rapid Fabrication of Self-Healable Noble Metal Gels for (Photo-)Electrocatalysis

Self-Supported Ag/Pt/Pd Alloy Aerogels as High-Performance Bifunctional and Durable Electrocatalysts for Methanol and Ethanol Oxidation Reactions

Assembly of nanoparticles (NPs) into functional macrostructures is imperative for the development of NP-based devices. However, existing methods employ insulating organic ligands, polymers, and biomolecules as mediators for the NP assembly, which are detrimental for charge transport and interparticle coupling that impede the efficient integration of low-dimensional properties. Herein, we report a methodology for the direct self-supported assembly of Ag/Pt/Pd alloy NPs into high surface area (119.1 ± 3.9 to 140.1 ± 5.7 m2/g), mesoporous (19.7 ± 6.2 to 23.0 ± 1.6 nm), and conducting nanostructures (aerogels) that show superior electrocatalytic activity and stability in methanol (MOR) and ethanol (EOR) oxidation reactions. Ultrasmall (3.9 ± 1.3 nm) and quasi-spherical Ag/Pt/Pd alloy NPs were synthesized via stepwise galvanic replacement reaction (GRR) of glutathione (GSH)-coated Ag NPs. As-synthesized NPs were transformed into free-standing alloy hydrogels via chemical oxidation of the GSH ligands. The composition of alloy aerogels was tuned by varying the oxidant/thiolate molar ratio of the precursor NP sol that prompts Ag dealloying with in situ generated HNO3, selectively enriching the Pt and Pd catalytic sites on the aerogel surface. The highest-performing alloy aerogel (Ag0.449Pt0.480Pd0.071) demonstrates excellent mass activity for methanol (3179.5 mA/mg) and ethanol (2444.5 mA/mg) electro-oxidation reactions, which are ∼4-5 times higher than those of commercial Pt/C and Pd/C electrocatalysts. The aerogel also maintained high alcohol oxidation activity for 17 h at a constant potential of -0.3 V in an alkaline medium. The synergistic effects of noble metal alloying, high surface area and mesoporosity, and the pristine active surface of aerogels provide efficient interaction of analytes with the nanostructure surface, facilitating both MOR and EOR activity and improving tolerance for poisonous byproducts, enabling the Ag/Pt/Pd alloy aerogel a promising (electro)catalyst for a number of new technologies.

Structural investigations of Au-Ni aerogels: morphology and element distribution

The physical properties of nanomaterials are determined by their structural features, making accurate structural control indispensable. This carries over to future applications. In the case of metal aerogels, highly porous networks of aggregated metal nanoparticles, such precise tuning is still largely pending. Although recent improvements in controlling synthesis parameters like electrolytes, reductants, or mechanical stirring, the focus has always been on one particular morphology at a time. Meanwhile, complex factors, such as morphology and element distributions, are studied rather sparsely. We demonstrate the capabilities of precise morphology design by deploying Au-Ni, a novel element combination for metal aerogels in itself, as a model system to combine common aerogel morphologies under one system for the first time. Au-Ni aerogels were synthesized via modified one- and two-step gelation, partially combined with galvanic replacement, to obtain aerogels with alloyed, heterostructural (novel metal aerogel structure of interconnected nanoparticles and nanochains), and hollow spherical building blocks. These differences in morphology are directly reflected in the physisorption behavior, linking the isotherm shape and pore size distribution to the structural features of the aerogels, including a broad-ranging specific surface area (35-65 m2 g-1). The aerogels were optimized regarding metal concentration, destabilization, and composition, revealing some delicate structural trends regarding the ligament size and hollow sphere character. Hence, this work significantly improves the structural tailoring of metal aerogels and possible up-scaling. Lastly, preliminary ethanol oxidation tests demonstrated that morphology design extends to the catalytic performance. All in all, this work emphasizes the strengths of morphology design to obtain optimal structures, properties, and (performances) for any material application.

Methyl esters synthesis from Luffa cylindrica seeds oil using green copper oxide nanoparticle catalyst in membrane reactor

This study investigates the potential role of Juglans sp. root extract-mediated copper oxide nanoparticles of Luffa cylindrica seed oil (LCSO) into methyl esters. The synthesized green nanoparticle was characterized by Energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), and Scanning electron microscopy (SEM) spectroscopies to find out the crystalline size (40 nm), surface morphology (rod shape), particle size (80-85 nm), and chemical composition (Cu = 80.25% & O = 19.75%), accordingly. The optimized protocol for the transesterification reaction was adjusted as oil to methanol molar ratio (1:7), copper oxide nano-catalyst concentration (0.2 wt %), and temperature (90 °C) corresponding to the maximum methyl esters yield of 95%. The synthesized methyl esters were characterized by GC-MS, 1H NMR, 13C NMR, and FT-IR studies to know and identify the chemical composition of newly synthesized Lufa biodiesel. The fuel properties of Luffa cylindrica seed oil biofuel were checked and compared with the American Biodiesel standards (ASTM) (D6751-10). Finally, it is commendable to use biodiesel made from wild, uncultivated, and non-edible Lufa cylindrica to promote and adopt a cleaner and sustainable energy method. The acceptance and implementation of the green energy method may result in favourable environmental effects, which in turn may lead to better societal and economic development.

Leveraging Ligand and Composition Effects: Morphology-Tailorable Pt-Bi Bimetallic Aerogels for Enhanced (Photo-)Electrocatalysis

Metal aerogels (MAs) are emerging porous materials displaying unprecedented potential in catalysis, sensing, plasmonic technologies, etc. However, the lack of efficient regulation of their nano-building blocks (NBBs) remains a big hurdle that hampers the in-depth investigation and performance enhancement. Here, by harmonizing composition and ligand effects, Pt- and Bi-based single- and bimetallic aerogels bearing NBBs of controlled dimensions and shapes are obtained by facilely tuning the metal precursors and the applied ligands. Particularly, by further modulating the electronic and optic properties of the aerogels via adjusting the content of the catalytically active Pt component and the semiconducting Bi component, both the electrocatalytic and photoelectrocatalytic performance of the Pt-Bi aerogels can be manipulated. In this light, an impressive catalytic performance for electro-oxidation of methanol is acquired, marking a mass activity of 6.4-fold higher under UV irradiation than that for commercial Pt/C. This study not only sheds light on in situ manipulating NBBs of MAs, but also puts forward guidelines for crafting high-performance MAs-based electrocatalysts and photoelectrocatalysts toward energy-related electrochemical processes.

Dual Structural Design of Platinum-Nickel Hydrogels for Wearable Glucose Biosensing with Ultrahigh Stability

Wearable glucose sensors are of great significance and highly required in mobile health monitoring and management but suffering from limited long-term stability and wearable adaptability. Here a simultaneous component and structure engineering strategy is presented, which involves Pt with abundant Ni to achieve three-dimensional, dual-structural Pt-Ni hydrogels with interconnected networks of PtNi nanowires and Ni(OH)₂ nanosheets, showing prominent electrocatalytic activity and stability in glucose oxidation under neutral condition. Specifically, the PtNi_(1:3) dual hydrogels shows 2.0 and 270.6 times' activity in the glucose electro-oxidation as much as the pure Pt and Ni hydrogels. Thanks to the high activity, structural stability, good flexibility, and self-healing property, the PtNi_(1:3) dual gel-based non-enzymatic glucose sensing chip is endowed with high performance. It features a high sensitivity, an excellent selectivity and flexibility, and particularly an outstanding long-term stability over 2 months. Together with a pH sensor and a wireless circuit, an accurate, real-time, and remote monitoring of sweat glucose is achieved. This facile design of novel dual-structural metallic hydrogels sheds light to rationally develop new functional materials for high-performance wearable biosensors.

Nonenzymatic Sweat Wearable Uric Acid Sensor Based on N-Doped Reduced Graphene Oxide/Au Dual Aerogels

Sweat wearable sensors enable noninvasive and real-time metabolite monitoring in human health management but lack accuracy and wearable applicability. The rational design of sensing electrode materials will be critical yet challenging. Herein, we report a dual aerogel-based nonenzymatic wearable sensor for the sensitive and selective detection of uric acid (UA) in human sweat. The three-dimensional porous dual-structural aerogels composed of Au nanowires and N-doped graphene nanosheets (noted as N-rGO/Au DAs) provide a large active surface, abundant access to the target, rapid electron transfer pathways, and a high intrinsic activity. Thus, a direct UA electro-oxidation is demonstrated at the N-rGO/Au DAs with a much higher activity than those at the individual gels (i.e., Au and N-rGO). Moreover, the resulting sensing chip displays high performance with a good anti-interfering ability, long-term stability, and excellent flexibility toward the UA detection. With the assistance of a wireless circuit, a wearable sensor is successfully applied in the real-time UA monitoring on human skin. The obtained result is comparable to that evaluated by high-performance liquid chromatography. This dual aerogel-based nonenzymatic biosensing platform not only holds considerable promise for the reliable sweat metabolite monitoring but also opens an avenue for metal-based aerogels as flexible electrodes in wearable sensing.

Ultrafine Core@Shell Cu1Au1@Cu1Pd3 Nanodots Synergized with 3D Porous N-Doped Graphene Nanosheets as a High-Performance Multifunctional Electrocatalyst

Rationally combining designed supports and metal-based nanomaterials is effective to synergize their respective physicochemical and electrochemical properties for developing highly active and stable/durable electrocatalysts. Accordingly, in this work, sub-5 nm and monodispersed nanodots (NDs) with the special nanostructure of an ultrafine Cu₁Au₁ core and a 2-3-atomic-layer Cu₁Pd₃ shell are synthesized by a facile solvothermal method, which are further evenly and firmly anchored onto 3D porous N-doped graphene nanosheets (NGS) via a simple annealing (A) process. The as-obtained Cu₁Au₁@Cu₁Pd₃ NDs/NGS-A exhibits exceptional electrocatalytic activity and noble-metal utilization toward the alkaline oxygen reduction, methanol oxidation, and ethanol oxidation reactions, showing dozens-fold enhancements compared with commercial Pd/C and Pt/C. Besides, it also has excellent long-term electrochemical stability and electrocatalytic durability. Advanced and comprehensive experimental and theoretical analyses unveil the synthetic mechanism of the special core@shell nanostructure and further reveal the origins of the significantly enhanced electrocatalytic performance: (1) the prominent structural properties of NGS, (2) the ultrasmall and monodispersed size as well as the highly uniform morphology of the NDs-A, (3) the special Cu-Au-Pd alloy nanostructure with an ultrafine core and a subnanometer shell, and (4) the strong metal-support interaction. This work not only develops a facile method for fabricating the special metal-based ultrafine-core@ultrathin-shell nanostructure but also proposes an effective and practical design paradigm of comprehensively and rationally considering both supports and metal-based nanomaterials for realizing high-performance multifunctional electrocatalysts, which can be further expanded to other supports and metal-based nanomaterials for other energy-conversion or environmental (electro)catalytic applications.

Pd Metallene Aerogels with Single-Atom W Doping for Selective Ethanol Oxidation

The development of advanced electrocatalysts with satisfactory C1 pathway selectivity for the ethanol oxidation reaction (EOR) is critical. Herein, a bubbling CO-induced gelation method is developed in acetic acid at 50 °C to construct single-atom W-doped Pd metallene aerogels (denoted as SA W-Pd MAs) within 1 h. In light of the metallene structural advantages of noble metal aerogels and single-atom W decoration, the resultant SA W-Pd MAs exhibit an outstanding EOR performance with high C1 pathway selectivity. Density functional theory calculations validate that the SA W-Pd MAs greatly improve the formation of the CH₃O intermediate and the transformation of poisonous CO species to CO₂, thus resulting in high C1 pathway selectivity. Therefore, this work not only offers an effective gelation method to fabricate noble metal aerogels with atomic-scale building blocks but also presents guidance to develop high-efficiency EOR electrocatalysts.

Highly Conductive and Mechanically Robust NiFe Alloy Aerogels: An Exceptionally Active and Durable Water Oxidation Catalyst

Poor stability of nanostructured electrocatalysts at rigorous industrial conditions significantly inhibits their performances in practical electrolyzers. Although many substrate-supported nanostructured electrocatalysts present attractive performance at small currents, they cannot sustain industry-level high current densities for long-term operation. Herein, by chemically organizing nanoscale electrocatalysts into a macroscopic substrate-free metallic alloy aerogel, this NiFe-based nano-catalyst achieves 1000-h durability at industrial-level current densities, with exceptionally high activities of 500 mA at the overpotential of only 281 mV. This NiFe alloy aerogel is constructed by a magnetic-field assisted growth and assembly of ferromagnetic NiFe nanoparticles, in which nanowires are loosely crosslinked by metallic joints. This alloy aerogel shows a high electric conductivity of 500 S m^-1 , structural stability for more than 1.5 years in alkaline electrolyte, and almost complete recovery after compression exceeding 50% strain for 1000 cycles. The excellent mechanical stability of this metallic aerogel behaves as the key contributor to the superior electrocatalytic stability under industrially relevant conditions. This work offers a paradigm for electrode design for the practical application of nano-catalysts in industrial alkaline water electrolysis.

Interfacially Locked Metal Aerogel Inside Porous Polymer Composite for Sensitive and Durable Flexible Piezoresistive Sensors

Flexible pressure sensors play significant roles in wearable devices, electronic skins, and human-machine interface (HMI). However, it remains challenging to develop flexible piezoresistive sensors with outstanding comprehensive performances, especially with excellent long-term durability. Herein, a facile "interfacial locking strategy" has been developed to fabricate metal aerogel-based pressure sensors with excellent sensitivity and prominent stability. The strategy broke the bottleneck of the intrinsically poor mechanical properties of metal aerogels by grafting them on highly elastic melamine sponge with the help of a thin polydimethylsiloxane (PDMS) layer as the interface-reinforcing media. The hierarchically porous conductive structure of the ensemble offered the as-prepared flexible piezoresistive sensor with a sensitivity as high as 12 kPa^-1 , a response time as fast as 85 ms, and a prominent durability over 23 000 compression cycles. The excellent comprehensive performance enables the successful application of the flexible piezoresistive sensor as two-dimensional (2D) array device as well as three-dimensional (3D) force-detecting device for real-time monitoring of HMI activities.

Amorphous metal-organic frameworks on PtCu hydrogels: Enzyme immobilization platform with boosted activity and stability for sensitive biosensing

Cell-free enzymatic catalysis (CFEC) is emerging biotechnology that simulates biological transformations without living cells. However, the high cost of separation and preparation of the enzyme has hindered the practical application of the CFEC. Enzyme immobilization technologies using solid supports to stabilize enzymes have been regarded as an efficient strategy to address this issue. Nevertheless, the activity and stability of the immobilized enzymes are still crucial challenges for working in vitro. Herein, an enzyme immobilization platform is developed by using PtCu hydrogels coated with amorphous metallic-organic frameworks (MOFs) as multifunctional carriers to encapsulate horseradish peroxidase (HRP). Specifically, PtCu hydrogels acting as a "reservoir of metal ions" can interact with the immobilized enzyme and facilitate electron transfer, leading to the boosted enzyme catalytic performances. Furthermore, amorphous MOFs on the surface of PtCu hydrogels serve as an "armor" to protect the internal enzymes from various perturbation environments. The resultant enzyme immobilization platform (PtCu@HRP@ZIF-8) not only shows an approximately 2.4-fold enhanced activity compared with free enzyme but also exhibits improved stability against harsh conditions. The PtCu@HRP@ZIF-8-based biosensor is constructed for sensitive sensing of organophosphorus pesticides (OPs). The proposed biosensor exhibits a favorable linear relationship with the concentration of paraoxon-ethyl from 6 to 800 ng/mL, with a low detection limit of 1.8 ng/mL. This work reveals the promising potential of our proposed enzyme immobilization platform in practical applications.

Ultrasmall Gold Nanoclusters-Enabled Fabrication of Ultrafine Gold Aerogels as Novel Self-Supported Nanozymes

Metal aerogels represent an emerging type of functional porous materials with promising applications in diverse fields, but the fabrication of metal aerogels with specific structure and property still remains a challenge. Here, the authors report a new approach to fabricate metal aerogels by using ultrasmall metal nanoclusters (NCs) as functional building blocks. By taking D-penicillamine-stabilized gold NCs (AuNCs) with a diameter of 1.4 nm as an example, Au aerogels with ultrafine ligament size (3.5 nm) and good enzyme-mimic properties are synthesized. Detailed characterization shows that the obtained Au aerogels possess typical 3D self-supported porous network structure with high gold purity and surface area. Time-lapse spectroscopic and microscopic monitoring of the gelation process reveal that these ultrasmall AuNCs first grow into large nanoparticles before fusion into nanowire networks, during which both pH and the precursor concentration are identified to be the determining factor. Owing to their highly porous structure and abundant metal nodes, these self-supported Au aerogels display excellent peroxidase-like properties. This work provides a strategy for fabricating advanced metal aerogels by taking ultrasmall-sized metal NCs as building blocks, which also opens new avenues for engineering the structure and properties of metal aerogels for further advancing their applications.

Expanding the Range: AuCu Metal Aerogels from H2O and EtOH

Due to their self-supporting and nanoparticulate structure, metal aerogels have emerged as excellent electrocatalysts, especially in the light of the shift to renewable energy cycles. While a large number of synthesis parameters have already been studied in depth, only superficial attention has been paid to the solvent. In order to investigate the influence of this parameter with respect to the gelation time, crystallinity, morphology, or porosity of metal gels, AuxCuy aerogels were prepared in water and ethanol. It was shown that although gelation in water leads to highly porous gels (60 m2g−1), a CuO phase forms during this process. The undesired oxide could be selectively removed using a post-washing step with formic acid. In contrast, the solvent change to EtOH led to a halving of the gelation time and the suppression of Cu oxidation. Thus, pure Cu aerogels were synthesized in addition to various bimetallic Au3X (X = Ni, Fe, Co) gels. The faster gelation, caused by the lower permittivity of EtOH, led to the formation of thicker gel strands, which resulted in a lower porosity of the AuxCuy aerogels. The advantage given by the solvent choice simplifies the preparation of metal aerogels and provides deeper knowledge about their gelation.

Perovskite oxide for emerging photo(electro)catalysis in energy and environment

Using solar energy to catalyse photo-driven processes to address the energy crisis and environmental pollution plays a role in the path to a sustainable society. Many oxide-based materials, especially perovskite oxides, have been widely investigated as catalysts for photocatalysis in energy and environment because of the low-cost and earth-abundant and good performance. At this stage, there is a need to present a scientific-based evaluation of the technologies developed so far and identify the most sustainable technologies and the existing limitations and opportunities for their commercialisation. This work comprehensively investigated the outcomes using various scientometric indices on perovskite oxide-based photo(electro)catalysts for water splitting, nitrogen fixation, carbon dioxide conversion, organic pollutant degradation, current trends and advances in the field. According to the results achieved, efforts in both energy and environment based on perovskite oxides have been initiated in the 1990s and accelerated since the 2010s. China and the United States were identified as the most contributing countries. Based on the results achieved in this study, the main milestones and current trends in the development of this field have been identified. The aim of this research is to provide useful guidelines for the further investigation of perovskite oxide-based catalysts for photoelectrocatalysis and photocatalysis both in energy and environment on the applications such as water splitting, nitrogen fixation, carbon dioxide conversion, and wastewater treatment.

Laser-assisted synthesis of Au aerogel with high-index facets for ethanol oxidation

Gold (Au) can be used as an ideal metal electrocatalyst for ethanol and glucose oxidation reactions due to its high performance-to-cost ratio. In this paper, the Au aerogel with high-index facets was synthesized by using the laser ablation in liquid technology, which can improve the electrocatalytic activity of Au. The as-prepared Au aerogel showed excellent mass activity and specific activity toward ethanol oxidation reaction, which are 4.6 times and 2.1 times higher than Au/C, respectively. The 3D porous nature and rich defect of the Au aerogel provide more active sites. In addition, the high-index facets with under-coordinated atoms enhance the adsorption of ethanol and glucose molecules, thus improving the intrinsic catalytic activity of Au aerogel. The effect of high-index facets has also been investigated by density functional theory calculations. Furthermore, the Au aerogels also show good electrocatalytic activity and stability toward glucose oxidation reaction. These results are conducive to promote the practical application of Au in electrocatalysis.

PdIr Aerogels with Boosted Peroxidase-like Activity for a Sensitive Total Antioxidant Capacity Colorimetric Bioassay

Metallic aerogels (MAs), imparting the active catalytic properties of nanostructured noble metals to macroscopic aerogels, draw tremendous interest in diverse fields owing to the unique features of three-dimensional interconnected channels, self-supported architectures, and pure metallic backbones. Moreover, flexible manipulation of compositions, high electrical conductivity, and abundant active sites of MAs contribute to the great potential to mimic natural enzymes. However, the cumbersome synthetic process takes a couple of hours to days, and unavoidable impurities usually impede surface electrons/mass transfer, posing the decrease of stability and enzyme-like activity of MAs. Here, a PdIr bimetallic aerogel prepared in the ethanol phase via spontaneous assembly and a surfactant-free strategy is reported. Gelation kinetics of PdIr aerogels in ethanol is increased with 2-4 orders of magnitude compared to the traditional preparation method in water. Owing to the intrinsic physicochemical properties, PdIr aerogels exhibit the high activity of peroxidase mimics using 3,3',5,5'-tetramethylbenzidine as a chromogenic probe. In addition, the PdIr aerogels maintain relatively high activity at an elevated temperature and pH of 3-7, demonstrating their good stability and survivability. Utilizing the exceptional peroxidase-like activity of PdIr aerogels, we realized the quantitative bioassay for H₂O₂ and total antioxidant capacity, indicating enormous potential in the quality evaluation of real samples.

Au aerogel for selective CO2electroreduction to CO: ultrafast preparation with high performance

Noble metal aerogels (NMAs) have been used in a variety of (photo-)electrocatalytic reactions, but pure Au aerogel (AG) has not been used in CO₂electroreduction to date. To explore the potential application in this direction, AG was prepared to be used as the cathode in CO₂electroreduction to CO. However, the gelation time of NMAs is usually very long, up to several weeks. Here, an excess NaBH₄and turbulence mixing-promoted gelation approach was developed by introducing magnetic stirring as an external force field, which therefore greatly shortened the formation time of Au gels to several seconds. The AG-3 (AG with Au loading of 0.003 g) exhibited a high CO Faradaic efficiency (FE) of 95.6% at an extremely low overpotential of 0.39 V, and over 91% of CO FE was reached in a wide window of -0.4 to -0.7 V versus the reversible hydrogen electrode (RHE). Partial current density in CO was measured to be -19.35 mA cm^-2at -0.8 V versus RHE under 1 atm of CO₂. The excellent performance should be ascribed to its porous structure, abundant active sites, and large electrochemical active surface area. It provides a new method for preparation of AG with ultrafast gelation time and large production at room temperature, and the resulting pure AG was for the first time used in the field of CO₂electroreduction.

Electrochemical gelation of quantum dots using non-noble metal electrodes at high oxidation potentials

Relative to conventional chemical approaches, electrochemical assembly of metal chalcogenide nanoparticles enables the use of two additional levers for tuning the assembly process: electrode material and potential. In our prior work, oxidative and metal-mediated pathways for electrochemical assembly of metal chalcogenide quantum dots (QDs) into three-dimensional gel architectures were investigated independently by employing a noble-metal (Pt) electrode at relatively high potentials and a non-noble metal electrode at relatively low potentials, respectively. In the present work, we reveal competition between the two electrogelation pathways under the condition of high oxidation potentials and non-noble metal electrodes (including Ni, Co, Zn, and Ag), where both pathways are active. We found that the electrogel structure formed under this condition is electrode material-dependent. For Ni, the major phase is oxidative electrogel, not a potential-dependent mixture of oxidative and metal-mediated electrogel that one would expect. A mechanistic study reveals that the metal-mediated electrogelation is suppressed by dithiolates, a side product from the oxidative electrogelation, which block the Ni electrode surface and terminate metal ion release. In contrast, for Co, Ag, and Zn, the electrode surface blockage by dithiolates is less effective than for Ni, such that metal-mediated electrogelation is the primary gelation pathway.

Noble Metal Aerogels

Noble metal-based nanomaterials have been a hot research topic during the past few decades. Particularly, self-assembled porous architectures have triggered tremendous interest. At the forefront of porous nanostructures, there exists a research endeavor of noble metal aerogels (NMAs), which are unique in terms of macroscopic assembly systems and three-dimensional (3D) porous network nanostructures. Combining excellent features of noble metals and the unique structural traits of porous nanostructures, NMAs are of high interest in diverse fields, such as catalysis, sensors, and self-propulsion devices. Regardless of these achievements, it is still challenging to rationally design well-tailored NMAs in terms of ligament sizes, morphologies, and compositions and profoundly investigate the underlying gelation mechanisms. Herein, an elaborate overview of the recent progress on NMAs is given. First, a simple description of typical synthetic methods and some advanced design engineering are provided, and then, the gelation mechanism models of NMAs are discussed in detail. Furthermore, promising applications particularly focusing on electrocatalysis and biosensors are highlighted. In the final section, brief conclusions and an outlook on the existing challenges and future chances of NMAs are also proposed.

Freeze-Thaw-Promoted Fabrication of Clean and Hierarchically Structured Noble-Metal Aerogels for Electrocatalysis and Photoelectrocatalysis

Noble‐metal aerogels (NMAs) have drawn increasing attention because of their self‐supported conductive networks, high surface areas, and numerous optically/catalytically active sites, enabling their impressive performance in diverse fields. However, the fabrication methods suffer from tedious procedures, long preparation times, unavoidable impurities, and uncontrolled multiscale structures, discouraging their developments. By utilizing the self‐healing properties of noble‐metal aggregates, the freezing‐promoted salting‐out behavior, and the ice‐templating effect, a freeze–thaw method is crafted that is capable of preparing various hierarchically structured noble‐metal gels within one day without extra additives. In light of their cleanliness, the multi‐scale structures, and combined catalytic/optical properties, the electrocatalytic and photoelectrocatalytic performance of NMAs are demonstrated, which surpasses that of commercial noble‐metal catalysts.

Unveiling reductant chemistry in fabricating noble metal aerogels for superior oxygen evolution and ethanol oxidation

Amongst various porous materials, noble metal aerogels attract wide attention due to their concurrently featured catalytic properties and large surface areas. However, insufficient understanding and investigation of key factors (e.g. reductants and ligands) in the fabrication process limits on-target design, impeding material diversity and available applications. Herein, unveiling multiple roles of reductants, we develop an efficient method, i.e. the excessive-reductant-directed gelation strategy. It enables to integrate ligand chemistry for creating gold aerogels with a record-high specific surface area (59.8 m2 g-1), and to expand the composition to all common noble metals. Moreover, we demonstrate impressive electrocatalytic performance of these aerogels for the ethanol oxidation and oxygen evolution reaction, and discover an unconventional organic-ligand-enhancing effect. The present work not only enriches the composition and structural diversity of noble metal aerogels, but also opens up new dimensions for devising efficient electrocatalysts for broad material systems.