Imaging Local Heating and Thermal Diffusion of Nanomaterials with Plasmonic Thermal Microscopy

Thermometries for Single Nanoparticles Heated with Light

The development of efficient nanoscale photon absorbers, such as plasmonic or high-index dielectric nanostructures, allows the remotely controlled release of heat on the nanoscale using light. These photothermal nanomaterials have found applications in various research and technological fields, ranging from materials science to biology. However, measuring the nanoscale thermal fields remains an open challenge, hindering full comprehension and control of nanoscale photothermal phenomena. Here, we review and discuss existent thermometries suitable for single nanoparticles heated under illumination. These methods are classified in four categories according to the region where they assess temperature: (1) the average temperature within a diffraction-limited volume, (2) the average temperature at the immediate vicinity of the nanoparticle surface, (3) the temperature of the nanoparticle itself, and (4) a map of the temperature around the nanoparticle with nanoscale spatial resolution. In the latter, because it is the most challenging and informative type of method, we also envisage new combinations of technologies that could be helpful in retrieving nanoscale temperature maps. Finally, we analyze and provide examples of strategies to validate the results obtained using different thermometry methods.

Intellectualized Visualization of Single-Particle Raman Spectra for Sensitive Detection and Simultaneous Multianalysis of Heavy Metal Ions

Easy-to-use, reliable, and real-time methods for detecting heavy metal ion contamination are urgently required, which is a primary concern for water pollution control and human health. However, present methods for this aim are still unable to achieve simultaneous multianalysis for complex real sample detection. Herein, an intellectualized vision-based single-nanoparticle Raman imaging strategy combined with ion-responsive functional nucleic acids (FNAs) was proposed to address these issues. We reported a correspondence between the concentration of the analytes and the density of particles (DOP) of specifically captured nanoparticles to achieve sensitive detection and simultaneous multianalysis of heavy metal ions. The specific detection of Pb2+ (Hg2+) was obtained with a detection linear range from 100 pM to 100 nM (from 500 fM to 100 nM) and limit of detections low to 1 pM (100 fM), with the advantages of good specificity, excellent homogeneity, and reproducibility. Furthermore, the differentiation of different heavy metal ions (Pb2+/Hg2+) was achieved, i.e., the simultaneous multianalysis, based on Raman imaging of the single particle and intelligent machine vision method. Finally, the Raman imaging assay was utilized for real sample analysis, and it provided a powerful and reliable tool for detecting trace Pb2+/Hg2+ in real water samples and facilitated the portable on-site monitoring of heavy metal ions.

Plasmonic Scattering Microscopy for Label-Free Imaging of Molecular Binding Kinetics: From Single Molecules to Single Cells

Measuring molecular binding kinetics represents one of the most important tasks in molecular interaction analysis. Surface plasmon resonance (SPR) is a popular tool for analyzing molecular binding. Plasmonic scattering microscopy (PSM) is a newly developed SPR imaging technology, which detects the out-of-plane scattering of surface plasmons by analytes and has pushed the detection limit of label-free SPR imaging down to a single-protein level. In addition, PSM also allows SPR imaging with high spatiotemporal resolution, making it possible to analyze cellular response to the molecular bindings. In this Mini Review, we present PSM as a method of choice for chemical and biological imaging, introduce its theoretical mechanism, present its experimental schemes, summarize its exciting applications, and discuss its challenges as well as the promising future.

Three-dimensional plasmonic nanoclusters driven by co-assembly of thermo-plasmonic nanoparticles and colloidal quantum dots

Metallic nanoparticles that support localized surface plasmons have emerged as fundamental iconic building blocks for nanoscale photonics. Self-assembled clustering of plasmonic nanoparticles with controlled near-field interactions offers an interesting novel route to manipulate the electromagnetic fields at a subwavelength scale. Various bottom-up, self-assembly manners have been successfully devised to build plasmonic nanoparticle clusters displaying attractive optical properties. However, the incapability to configure on-demand architectures limits its practical reliability uses for scalable nanophotonic devices. Furthermore, a critical challenge has been addressing the accurate positioning of functional nanoparticles, including catalytic nanoparticles, dielectric nanoparticles, and quantum dots (QDs) in the clustered plasmonic hotspots. This work proposes a micropipette-based self-assembly method to fabricate three-dimensional architectures composed of colloidal clusters. The heterogeneous colloidal clusters comprising metallic nanoparticles and QDs are fabricated in one step by the micropipette-based self-assembly method. A plasmonic clustered pillar embedding QDs exhibited excellent photoluminescence characteristics compared to a collapsed pillar. The experimental and theoretical demonstration of the localized surface plasmon resonance and thermo-plasmonic properties of the colloidal clusters was performed.

Rapid Regulation of Local Temperature and Transient Receptor Potential Vanilloid 1 Ion Channels with Wide-Field Plasmonic Thermal Microscopy

Plasmonic absorption of light can create significant local heat and has become a promising tool for rapid temperature regulation in diverse fields, from biomedical technology to optoelectronics. Current plasmonic heating usually relies on specially designed nanomaterials randomly distributed in the space and barely provides uniform temperature regulation in a wide field. Herein, we report a rapid temperature regulation strategy on a plain gold-coated glass slip using a plasmonic scattering microscopy, which can be referred to as wide-field plasmonic thermal microscopy (W-PTM). We calibrated the W-PTM by monitoring the phase transition of the temperature-sensitive polymer solutions, showing that it can provide a temperature regulation range of 33-80 °C. Moreover, the W-PTM provides imaging capability, thus allowing the statistical analysis of the phase-transitioned polymeric nanoparticles. Finally, we demonstrated that W-PTM can be used for noninvasive and local regulation of the transient receptor potential vanilloid 1 (TRPV1) ion channels in the living cells, which can be monitored by simultaneous fluorescence imaging of the calcium influx. With the nondestructive local temperature-regulating and concurrent fluorescence imaging capability, we anticipate that W-PTM can be a powerful tool to study cellular activities associated with cellular membrane temperature changes.

Spatiotemporal-Resolved Hyperspectral Raman Imaging of Plasmon-Assisted Reactions at Single Hotspots

Raman spectroscopy facilitates the study of reacting molecules on single nanomaterials. In recent years, the temporal resolution of Raman spectral measurement has been remarkably reduced to the millisecond level. However, the classic scan-based imaging mode limits the application in the dynamical study of reactions at multiple nanostructures. In this paper, we propose a spatiotemporal-resolved Raman spectroscopy (STRS) technology to achieve fast (∼40 ms) and high spatial resolution (∼300 nm) hyperspectral Raman imaging of single nanostructures. With benefits of the outstanding electromagnetic field enhancement factor by surface plasmon resonance (∼10¹²) and the snapshot hyperspectral imaging strategy, we demonstrate the observation of stepwise Raman signals from single-particle plasmon-assisted reactions. Results reveal that the reaction kinetics is strongly affected by not only the surface plasmon-polariton generation but also the density of Raman molecules. In consideration of the spatiotemporal resolving capability of STRS, we anticipate that it provides a potential platform for further extending the application of Raman spectroscopy methods in the dynamic study of 1D or 2D nanostructures.

Spatiotemporal Evolution of Temperature During Transient Heating of Nanoparticle Arrays

Nanoparticles (NPs) are promising agents to absorb external energy and generate heat. Clusters of NPs or NP array heating have found an essential role in several biomedical applications, diagnostic techniques, and chemical catalysis. Various studies have shed light on the heat transfer of nanostructures and greatly advanced our understanding of NP array heating. However, there is a lack of analytical tools and dimensionless parameters to describe the transient heating of NP arrays. Here we demonstrate a comprehensive analysis of the transient NP array heating. Firstly, we develop a set of analytical solutions for the NP array heating and provide a useful mathematical description of the spatial-temporal evolution of temperature for 2D, 3D, and spherical NP array heating. Based on this, we introduce the concept of thermal resolution that quantifies the relationship between minimal heating time, NP array size, energy intensity, and target temperature. Lastly, we define a set of dimensionless parameters that characterize the transition from confined heating to delocalized heating. This study advances the understanding of nanomaterials heating and guides the rational design of innovative approaches for NP array heating.

Nanosecond-resolution photothermal dynamic imaging via MHZ digitization and match filtering

Photothermal microscopy has enabled highly sensitive label-free imaging of absorbers, from metallic nanoparticles to chemical bonds. Photothermal signals are conventionally detected via modulation of excitation beam and demodulation of probe beam using lock-in amplifier. While convenient, the wealth of thermal dynamics is not revealed. Here, we present a lock-in free, mid-infrared photothermal dynamic imaging (PDI) system by MHz digitization and match filtering at harmonics of modulation frequency. Thermal-dynamic information is acquired at nanosecond resolution within single pulse excitation. Our method not only increases the imaging speed by two orders of magnitude but also obtains four-fold enhancement of signal-to-noise ratio over lock-in counterpart, enabling high-throughput metabolism analysis at single-cell level. Moreover, by harnessing the thermal decay difference between water and biomolecules, water background is effectively separated in mid-infrared PDI of living cells. This ability to nondestructively probe chemically specific photothermal dynamics offers a valuable tool to characterize biological and material specimens.

Photothermal microscopy is limited for imaging of thermal dynamics. Here, the authors introduce a lock-in free, mid-infrared photothermal dynamic imaging system, which significantly increases SNR and imaging speed, and demonstrate metabolism analysis at single-cell level and background removal.

Heat transport induced by electron transfer: A general temperature quantum calculation

Electron transfer dominates chemical processes in biological, inorganic, and material chemistry. Energetic aspects of such phenomena, in particular, the energy transfer associated with the electron transfer process, have received little attention in the past but are important in designing energy conversion devices. This paper generalizes our earlier work in this direction, which was based on the semiclassical Marcus theory of electron transfer. It provides, within a simple model, a unified framework that includes the deep (nuclear) tunneling limit of electron transfer and the associated heat transfer when the donor and acceptor sites are seated in environments characterized by different local temperatures. The electron transfer induced heat conduction is shown to go through a maximum at some intermediate average temperature where quantum effects are already appreciable, and it approaches zero when the average temperature is very high (the classical limit) or very low (deep tunneling).

Separating a linear C5 hydrocarbon from a branched C6 hydrocarbon: n-pentane from 2,2-dimethyl butane using levitation and blow torch effects

The separation of linear from branched hydrocarbons is often required in many situations. There are several methods through which they can be separated but none provides a very high degree of purity or works without considerable expenditure of energy. Recently, a novel method was proposed to separate a mixture of neopentane and n-pentane. The present work demonstrates that the method can be used for separating other mixtures of hydrocarbons as well, by attempting the separation of a mixture of 2,2-dimethyl butane and n-pentane. Intermolecular interaction potentials have been modified to reproduce the experimental heat of adsorption and diffusivity of 2,2-dimethyl butane and n-pentane in zeolite NaY. The method involves choosing the correct host zeolite or other porous solids and introducing hot zones at appropriate positions. This result drives both the components to the opposite ends of the zeolite column, thus leading to separation. The achieved separation factors are much higher than what can be obtained with the help of existing methods. Different properties have been computed to understand the process involved in the separation of the mixture. The approach employed here uses very little energy for separation, making it suitable for green chemistry.

High purity separation of n-pentane from neopentane using a nano-crystal of zeolite Y

A method for the separation of a mixture of n-pentane and neopentane using a nano-crystallite of zeolite Y is reported. This method judiciously combines two well-known, counter-intuitive phenomena, the levitation and the blowtorch effects. The result is that the two components are separated by being driven to the opposite ends of the zeolite column. The calculations are based on the non-equilibrium Monte Carlo method with moves from a region at one temperature to a region at another temperature. The necessary acceptance probability for such moves has been derived here on the basis of stationary solution of an inhomogeneous Fokker-Planck equation. Simulations have been carried out with a realistic and experimentally relevant Gaussian hot zone and also a square hot zone, both of which lead to very good separation. Simulations without the hot zones do not show any separation. The results are reported at a loading of 1 molecule per cage. The temperature of the hot zone is just ∼30 K higher than the ambient temperature. The separation factors of the order of 10¹⁷ are achieved using single crystals of zeolite, which are less than 1 μm long. The conditions for including the hot zone may be experimentally realizable in the future considering the rapid advances in nanoscale thermometry. The separation process is likely to be energetically more efficient by several orders of magnitude as compared to the existing methods of separation, making the method very green.

Single-molecule calorimeter and free energy landscape

The precise measurement of thermodynamic and kinetic properties for biomolecules provides the detailed information for a multitude of applications in biochemistry, biosensing, and health care. However, sensitivity in characterizing the thermodynamic binding affinity down to a single molecule, such as the Gibbs free energy ([Formula: see text]), enthalpy ([Formula: see text]), and entropy ([Formula: see text]), has not materialized. Here, we develop a nanoparticle-based technique to probe the energetic contributions of single-molecule binding events, which introduces a focused laser of optical tweezer to an optical path of plasmonic imaging to accumulate and monitor the transient local heating. This single-molecule calorimeter uncovers the complex nature of molecular interactions and binding characterizations, which can be employed to identify the thermodynamic equilibrium state and determine the energetic components and complete thermodynamic profile of the free energy landscape. This sensing platform promises a breakthrough in measuring thermal effect at the single-molecule level and provides a thorough description of biomolecular specific interactions.

Quantifying and Adjusting Plasmon-Driven Nano-Localized Temperature Field around Gold Nanorods for Nucleic Acids Amplification

Fast nucleic acid (NA) amplification has found widespread biomedical applications, where high thermocycling rate is the key. The plasmon-driven nano-localized thermocycling around the gold nanorods (AuNRs) is a promising alternative, as the significantly reduced reaction volume enables a rapid temperature response. However, quantifying and adjusting the nano-localized temperature field remains challenging for now. Herein, a simple method is developed to quantify and adjust the nano-localized temperature field around AuNRs by combining experimental measurement and numerical simulation. An indirect method to measure the surface temperature of AuNRs is first developed by utilizing the temperature-dependent stability of Authiol bond. Meanwhile, the relationship of AuNRs' surface temperature with the AuNRs concentration and laser intensity, is also studied. In combination with thermal diffusion simulation, the nano-localized temperature field under the laser irradiation is obtained. The results show that the restricted reaction volume (≈aL level) enables ultrafast thermocycling rate (>10⁴  °C s^-1 ). At last, a duplex-specific nuclease (DSN)-mediated isothermal amplification is successfully demonstrated within the nano-localized temperature field. It is envisioned that the developed method for quantifying and adjusting the nano-localized temperature field around AuNRs is adaptive for various noble metal nanostructures and will facilitate the development of the biochemical reaction in the nano-localized environment.

The video-rate imaging of sub-10 nm plasmonic nanoparticles in a cellular medium free of background scattering

Plasmonic nanoparticles (e.g., gold, silver) have attracted much attention for biological sensing and imaging as promising nanoprobes. Practical biomedical applications demand small gold nanoparticles (Au NPs) with a comparable size to quantum dots and fluorescent proteins. Very small nanoparticles with a size below the Rayleigh limit (usually <30-40 nm) are hard to see by light scattering using a dark-field microscope, especially within a cellular medium. A photothermal microscope is able to detect very small nanoparticles, down to a few nanometers, but the imaging speed is usually too slow (minutes to hours) to image living cell processes. Here an absorption modulated scattering microscopy (AMSM) method is presented, which allows for the imaging of sub-10 nm Au NPs within a cellular medium. The unique physical mechanism of AMSM offers the remarkable ability to remove the light scattering background of the cellular component. In addition to having a sensitivity comparable to that of photothermal microscopy, AMSM has a much higher imaging speed, close to the video rate (20 fps), which allows for the dynamic tracking of small nanoparticles in living cells. This AMSM method might be a valuable tool for living cell imaging, using sub-10 nm Au NPs as biological probes, and thereby unlocking many new applications, such as single molecule labeling and the dynamic tracking of molecular interactions.

Moving Electrons Purposefully through Single Molecules and Nanostructures: A Tribute to the Science of Professor Nongjian Tao (1963-2020)

Electrochemistry intersected nanoscience 25 years ago when it became possible to control the flow of electrons through single molecules and nanostructures. Many surprises and a wealth of understanding were generated by these experiments. Professor Nongjian Tao was among the pioneering scientists who created the methods and technologies for advancing this new frontier. Achieving a deeper understanding of charge transport in molecules and low-dimensional materials was the first priority of his experiments, but he also succeeded in discovering applications in chemical sensing and biosensing for these novel nanoscopic systems. In parallel with this work, the investigation of a range of phenomena using novel optical microscopic methods was a passion of his and his students. This article is a review and an appreciation of some of his many contributions with a view to the future.

Single-Nanoparticle Thermometry with a Nanopipette

Thermal measurements at the nanoscale are key for designing technologies in many areas, including drug delivery systems, photothermal therapies, and nanoscale motion devices. Herein, we present a nanothermometry technique that operates in electrolyte solutions and, therefore, is applicable for many in vitro measurements, capable of measuring and mapping temperature with nanoscale spatial resolution and sensitive to detect temperature changes down to 30 mK with 43 μs temporal resolution. The methodology is based on local measurements of ionic conductivity confined at the tip of a pulled glass capillary, a nanopipettete, with opening diameters as small as 6 nm. When scanned above a specimen, the measured ion flux is converted into temperature using an extensive theoretical support given by numerical and analytical modeling. This allows quantitative thermal measurements with a variety of capillary dimensions and is applicable to a range of substrates. We demonstrate the capabilities of this nanothermometry technique by simultaneous mapping of temperature and topography on sub-micrometer-sized aggregates of thermoplasmonic nanoparticles heated by a laser and observe the formation of micro- and nanobubbles upon plasmonic heating. Furthermore, we perform quantitative thermometry on a single-nanoparticle level, demonstrating that the temperature at an individual nanoheater of 25 nm in diameter can reach an increase of about 3 K.

Dual-Functional Plasmonic Photothermal Biosensors for Highly Accurate Severe Acute Respiratory Syndrome Coronavirus 2 Detection

The ongoing outbreak of the novel coronavirus disease (COVID-19) has spread globally and poses a threat to public health in more than 200 countries. Reliable laboratory diagnosis of the disease has been one of the foremost priorities for promoting public health interventions. The routinely used reverse transcription polymerase chain reaction (RT-PCR) is currently the reference method for COVID-19 diagnosis. However, it also reported a number of false-positive or -negative cases, especially in the early stages of the novel virus outbreak. In this work, a dual-functional plasmonic biosensor combining the plasmonic photothermal (PPT) effect and localized surface plasmon resonance (LSPR) sensing transduction provides an alternative and promising solution for the clinical COVID-19 diagnosis. The two-dimensional gold nanoislands (AuNIs) functionalized with complementary DNA receptors can perform a sensitive detection of the selected sequences from severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) through nucleic acid hybridization. For better sensing performance, the thermoplasmonic heat is generated on the same AuNIs chip when illuminated at their plasmonic resonance frequency. The localized PPT heat is capable to elevate the in situ hybridization temperature and facilitate the accurate discrimination of two similar gene sequences. Our dual-functional LSPR biosensor exhibits a high sensitivity toward the selected SARS-CoV-2 sequences with a lower detection limit down to the concentration of 0.22 pM and allows precise detection of the specific target in a multigene mixture. This study gains insight into the thermoplasmonic enhancement and its applicability in the nucleic acid tests and viral disease diagnosis.

Dual-Functional Plasmonic Photothermal Biosensors for Highly Accurate Severe Acute Respiratory Syndrome Coronavirus 2 Detection

The ongoing outbreak of the novel coronavirus disease (COVID-19) has spread globally and poses a threat to public health in more than 200 countries. Reliable laboratory diagnosis of the disease has been one of the foremost priorities for promoting public health interventions. The routinely used reverse transcription polymerase chain reaction (RT-PCR) is currently the reference method for COVID-19 diagnosis. However, it also reported a number of false-positive or -negative cases, especially in the early stages of the novel virus outbreak. In this work, a dual-functional plasmonic biosensor combining the plasmonic photothermal (PPT) effect and localized surface plasmon resonance (LSPR) sensing transduction provides an alternative and promising solution for the clinical COVID-19 diagnosis. The two-dimensional gold nanoislands (AuNIs) functionalized with complementary DNA receptors can perform a sensitive detection of the selected sequences from severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) through nucleic acid hybridization. For better sensing performance, the thermoplasmonic heat is generated on the same AuNIs chip when illuminated at their plasmonic resonance frequency. The localized PPT heat is capable to elevate the in situ hybridization temperature and facilitate the accurate discrimination of two similar gene sequences. Our dual-functional LSPR biosensor exhibits a high sensitivity toward the selected SARS-CoV-2 sequences with a lower detection limit down to the concentration of 0.22 pM and allows precise detection of the specific target in a multigene mixture. This study gains insight into the thermoplasmonic enhancement and its applicability in the nucleic acid tests and viral disease diagnosis.

Non-Arrhenius Reaction-Diffusion Kinetics for Protein Inactivation over a Large Temperature Range

Understanding protein folding and unfolding has been a long-standing fundamental question and has important applications in manipulating protein activity in biological systems. Experimental investigations of protein unfolding have been predominately conducted by small temperature perturbations (e.g., temperature jump), while molecular simulations are limited to small time scales (microseconds) and high temperatures to observe unfolding. Thus, it remains unclear how fast a protein unfolds irreversibly and loses function (i.e., inactivation) across a large temperature range. In this work, using nanosecond pulsed heating of individual plasmonic nanoparticles to create precise localized heating, we examine the protein inactivation kinetics at extremely high temperatures. Connecting this with protein inactivation measurements at low temperatures, we observe that the kinetics of protein unfolding is less sensitive to temperature change at the higher temperatures, which significantly departs from the Arrhenius behavior extrapolated from low temperatures. To account for this effect, we propose a reaction-diffusion model that modifies the temperature-dependence of protein inactivation by introducing a diffusion limit. Analysis of the reaction-diffusion model provides general guidelines in the behavior of protein inactivation (reaction-limited, transition, diffusion-limited) across a large temperature range from physiological temperature to extremely high temperatures. We further demonstrate that the reaction-diffusion model is particularly useful for designing optimal operating conditions for protein photoinactivation. The experimentally validated reaction-diffusion kinetics of protein unfolding is an important step toward understanding protein-inactivation kinetics over a large temperature range. It has important applications including molecular hyperthermia and calls for future studies to examine this model for other protein molecules.

Fermi level-tuned optics of graphene for attocoulomb-scale quantification of electron transfer at single gold nanoparticles

Measurement of electron transfer at single-molecule level is normally restricted by the detection limit of faraday current, currently in a picoampere to nanoampere range. Here we demonstrate a unique graphene-based electrochemical microscopy technique to make an advance in the detection limit. The optical signal of electron transfer arises from the Fermi level-tuned Rayleigh scattering of graphene, which is further enhanced by immobilized gold nanostars. Owing to the specific response to surface charged carriers, graphene-based electrochemical microscopy enables an attoampere-scale detection limit of faraday current at multiple individual gold nanoelectrodes simultaneously. Using the graphene-based electrochemical microscopy, we show the capability to quantitatively measure the attocoulomb-scale electron transfer in cytochrome c adsorbed at a single nanoelectrode. We anticipate the graphene-based electrochemical microscopy to be a potential electrochemical tool for in situ study of biological electron transfer process in organelles, for example the mitochondrial electron transfer, in consideration of the anti-interference ability to chemicals and organisms.

Plasmon-Enhanced Photoelectrochemical Water Splitting for Efficient Renewable Energy Storage

Photoelectrochemical (PEC) water splitting is a promising approach for producing hydrogen without greenhouse gas emissions. Despite decades of unceasing efforts, the efficiency of PEC devices based on earth-abundant semiconductors is still limited by their low light absorption, low charge mobility, high charge-carrier recombination, and reduced diffusion length. Plasmonics has recently emerged as an effective approach for overcoming these limitations, although a full understanding of the involved physical mechanisms remains elusive. Here, the reported plasmonic effects are outlined, such as resonant energy transfer, scattering, hot electron injection, guided modes, and photonic effects, as well as the less investigated catalytic and thermal effects used in PEC water splitting. In each section, the fundamentals are reviewed and the most representative examples are discussed, illustrating possible future developments for achieving improved efficiency of plasmonic photoelectrodes.

Measuring the activation energy barrier for the nucleation of single nanosized vapor bubbles

Heterogeneous bubble nucleation is one of the most fundamental interfacial processes that has received broad interest from diverse fields of physics and chemistry. While most studies focused on large microbubbles, here we employed a surface plasmon resonance microscopy to measure the nucleation rate constant and activation energy barrier of single nanosized embryo vapor bubbles upon heating a flat gold film with a focused laser beam. Image analysis allowed for simultaneously determining the local temperature and local nucleation rate constant from the same batch of optical images. By analyzing the dependence of nucleation rate constant on temperature, we were able to calculate the local activation energy barrier within a submicrometer spot. Scanning the substrate further led to a nucleation rate map with a spatial resolution of 100 nm, which revealed no correlation with the local roughness. These results indicate that facet structure and surface chemistry, rather than geometrical roughness, regulated the activation energy barrier for heterogeneous nucleation of embryo nanobubbles.

Plasmonic Heating of Nanostructures

The absorption of light by plasmonic nanostructures and their associated temperature increase are exquisitely sensitive to the shape and composition of the structure and to the wavelength of light. Therefore, much effort is put into synthesizing novel nanostructures for optimized interaction with the incident light. The successful synthesis and characterization of high quality and biocompatible plasmonic colloidal nanoparticles has fostered numerous and expanding applications, especially in biomedical contexts, where such particles are highly promising for general drug delivery and for tomorrow's cancer treatment. We review the thermoplasmonic properties of the most commonly used plasmonic nanoparticles, including solid or composite metallic nanoparticles of various dimensions and geometries. Common methods for synthesizing plasmonic particles are presented with the overall goal of providing the reader with a guide for designing or choosing nanostructures with optimal thermoplasmonic properties for a given application. Finally, the biocompatibility and biological tolerance of structures are critically discussed along with novel applications of plasmonic nanoparticles in the life sciences.

Microscale Temperature Shaping Using Spatial Light Modulation on Gold Nanoparticles

Heating on the microscale using focused lasers gave rise to recent applications, e.g., in biomedicine, biology and microfluidics, especially using gold nanoparticles as efficient nanoabsorbers of light. However, such an approach naturally leads to nonuniform, Gaussian-like temperature distributions due to the diffusive nature of heat. Here, we report on an experimental means to generate arbitrary distributions of temperature profiles on the micrometric scale (e.g. uniform, linear, parabolic, etc) consisting in illuminating a uniform gold nanoparticle distribution on a planar substrate using spatially contrasted laser beams, shaped using a spatial light modulator (SLM). We explain how to compute the light pattern and the SLM interferogram to achieve the desired temperature distribution, and demonstrate the approach by carrying out temperature measurements using quantitative wavefront sensing.

In Situ Visualization of Electrocatalytic Reaction Activity at Quantum Dots for Water Oxidation

Exploring electrocatalytic reactions on the nanomaterial surface can give crucial information for the development of robust catalysts. Here, electrocatalytic reaction activity at single quantum dots (QDs) loaded silica microparticle involved in water oxidation is visualized using electrochemiluminescence (ECL) microscopy. Under positive potential, the active redox centers at QDs induce the generation of hydroperoxide surface intermediates as coreactants to remarkably enhance ECL emission from luminol derivative molecules for imaging. For the first time, in situ visualization of the catalytic activity of water oxidation with QDs catalyst was achieved, supported by a linear relation between ECL intensity and turn over frequency. A very slight diffusion trend attributed to only the luminol species proved in situ capture of hydroperoxide surface intermediates at catalytic active sites of QDs. This work provides tremendous potential in online imaging of electrocatalytic reactions and visual evaluation of catalyst performance.

Light-Driven Nano-oscillators for Label-Free Single-Molecule Monitoring of MicroRNA

Here, we present a mapping tool based on individual light-driven nano-oscillators for label-free single-molecule monitoring of microRNA. This design uses microRNA as a single-molecule damper for nano-oscillators by forming a rigid dual-strand structure in the gap between nano-oscillators and the immobilized surface. The ultrasensitive detection is attributed to comparable dimensions of the gap and microRNA. A developed surface plasmon-coupled scattering imaging technology enables us to directly measure the real-time gap distance vibration of multiple nano-oscillators with high accuracy and fast dynamics. High-level and low-level states of the oscillation amplitude indicate melting and hybridization statuses of microRNA. Lifetimes of two states reveal that the hybridization rate of microRNA is determined by the three-dimensional diffusion. This imaging technique contributes application potentials in a single-molecule detection and nanomechanics study.

Electrochemical impedance spectroscopy of single Au nanorods

Monochromatic dark-field microscopy coupled with high-frequency potential modulation leads to non-faradaic electrochemical impedance spectroscopy of single Au nanorods.

We propose monochromatic dark-field imaging microscopy (DFM) to measure the non-faradaic electrochemical impedance spectroscopy (EIS) of single Au nanorods (AuNRs). DFM was utilized to monitor the plasmonic scattering of monochromatic incident light by surface-immobilized individual AuNRs. When modulating the surface potential at a certain frequency, non-faradaic charging and discharging of AuNRs altered their electron density, leading to periodical fluctuations in the scattering intensity. Analysis of the amplitude and phase of the optical intensity fluctuation as a function of modulation frequency resulted in the EIS of single AuNRs. High-frequency (>100 Hz) modulation allowed us to differentiate the intrinsic charging effect from other contributions such as the periodic migration and accumulation of counterions in the surrounding medium, because the latter occurred at a longer timescale. As a result, single nanoparticle EIS led to the surface capacitance of single AuNRs being closer to the theoretical value. Since interfacial capacitance has been proven sensitive to molecular interactions, the present work also offers a new platform for single nanoparticle sensing by measuring the single nanoparticle capacitance.

Imaging the chemical activity of single nanoparticles with optical microscopy

Chemical activity of single nanoparticles can be imaged and determined by monitoring the optical signal of each individual during chemical reactions with advanced optical microscopes. It allows for clarifying the functional heterogeneity among individuals, and for uncovering the microscopic reaction mechanisms and kinetics that could otherwise be averaged out in ensemble measurements.

Imaging the transient heat generation of individual nanostructures with a mechanoresponsive polymer

Measuring the localized transient heat generation is critical for developing applications of nanomaterials in areas of photothermal therapy (PTT), drug delivery, optomechanics and biological processes engineering. However, accurate thermometry with high spatiotemporal resolution is still a challenge. Here we develop a thermosensitive polymer-capped gold nanorod (AuNRs@pNIPAAm), which has temperature-dependent local surface plasmon resonance spectra due to the submolecular conformational change of pNIPAAm molecules. We measure the conformational dynamics on individual gold nanorods at the milliseconds level by the developed spatiotemporal resolution plasmonic spectroscopy (SRPS) and find that it has a fast (<4 ms), linear and reversible mechanoresponse to temperature changes as small as 80 mK. The rapid and highly sensitive thermosensitive AuNRs@pNIPAAm opens a new way to achieve spatiotemporal thermometry for potential applications in PTT and other biological research.

Remote thermometers with a high spatiotemporal resolution are very desirable for applications in the life sciences, including photothermal therapy. Here, Chen et al. develop polymer coated gold nanorods with a temperature sensitivity of 80 mK and a 4 ms response time for thermometry in the life sciences.

Intermittent photocatalytic activity of single CdS nanoparticles

Semiconductor photocatalysis holds promising keys to address various energy and environmental challenges. Most studies to date are based on ensemble analysis, which may mask critical photocatalytic kinetics in single nanocatalysts. Here we report a study of imaging photocatalytic hydrogen production of single CdS nanoparticles with a plasmonic microscopy in an in operando manner. Surprisingly, we find that the photocatalytic reaction switches on and off stochastically despite the fact that the illumination is kept constant. The on and off states follow truncated and full-scale power-law distributions in broad time scales spanning 3-4 orders of magnitude, respectively, which can be described with a statistical model involving stochastic reactions rates at multiple active sites. This phenomenon is analogous to fluorescence photoblinking, but the underlying mechanism is different. As individual nanocatalyst represents the elementary photocatalytic platform, the discovery of the intermittent nature of the photocatalysis provides insights into the fundamental photochemistry and photophysics of semiconductor nanomaterials, which is anticipated to substantially benefit broad application fields such as clean energy, pollution treatment, and chemical synthesis.

Visualizing the bidirectional electron transfer in a Schottky junction consisting of single CdS nanoparticles and a planar gold film

Bidirectional electron transfer crossing the metal/semiconductor interface regulates the light absorption and carrier separation efficiency of plasmonic-semiconductor hybrid nanomaterials. Existing studies have been largely focused on a localized surface plasmon resonance (LSPR) effect contributed by an ensemble of metal nanomaterials. Herein, we constructed a Schottky junction that consisted of single CdS nanoparticles and a planar gold film, and investigated hot electrons excited by the surface plasmon polaritons (SPPs) propagating in the gold film. When illuminating the interface with blue light, photoinduced electrons were found to inject from the CdS nanoparticle to the gold film. In a reverse process, SPPs were generated on shining a red beam into the gold film via a Kretschmann configuration, resulting in the injection of hot electrons into CdS nanoparticles. A recently developed plasmonic microscopy method was employed to monitor the entire process, providing the ability to image a single nanoparticle to visualize the bidirectional electron transfer dynamics in a Schottky junction involving propagating SPPs. The present study advances the understanding of the mechanism of hot electron transfer, which is anticipated to aid in the rational design and optimization of plasmonic-semiconductor hybrid nanomaterials with broad applications in photocatalysis, photovoltaic devices, and photoelectrochemical sensing.

Improved Margins Detection of Regions Enriched with Gold Nanoparticles inside Biological Phantom

Utilizing the surface plasmon resonance (SPR) effect of gold nanoparticles (GNPs) enables their use as contrast agents in a variety of biomedical applications for diagnostics and treatment. These applications use both the very strong scattering and absorption properties of the GNPs due to their SPR effects. Most imaging methods use the light-scattering properties of the GNPs. However, the illumination source is in the same wavelength of the GNPs' scattering wavelength, leading to background noise caused by light scattering from the tissue. In this paper we present a method to improve border detection of regions enriched with GNPs aiming for the real-time application of complete tumor resection by utilizing the absorption of specially targeted GNPs using photothermal imaging. Phantoms containing different concentrations of GNPs were irradiated with a continuous-wave laser and measured with a thermal imaging camera which detected the temperature field of the irradiated phantoms. By modulating the laser illumination, and use of a simple post processing, the border location was identified at an accuracy of better than 0.5 mm even when the surrounding area got heated. This work is a continuation of our previous research.

Optical Imaging of Phase Transition and Li-Ion Diffusion Kinetics of Single LiCoO(2) Nanoparticles During Electrochemical Cycling

Understanding the phase transition and Li-ion diffusion kinetics of Li-ion storage nanomaterials holds promising keys to further improve the cycle life and charge rate of the Li-ion battery. Traditional electrochemical studies were often based on a bulk electrode consisting of billions of electroactive nanoparticles, which washed out the intrinsic heterogeneity among individuals. Here, we employ optical microscopy, termed surface plasmon resonance microscopy (SPRM), to image electrochemical current of single LiCoO₂ nanoparticles down to 50 fA during electrochemical cycling, from which the phase transition and Li-ion diffusion kinetics can be quantitatively resolved in a single nanoparticle, in operando and high throughput manner. SPRM maps the refractive index (RI) of single LiCoO₂ nanoparticles, which significantly decreases with the gradual extraction of Li-ions, enabling the optical read-out of single nanoparticle electrochemistry. Further scanning electron microscopy characterization of the same batch of nanoparticles led to a bottom-up strategy for studying the structure-activity relationship. As RI is an intrinsic property of any material, the present approach is anticipated to be applicable for versatile kinds of anode and cathode materials, and to facilitate the rational design and optimization toward durable and fast-charging electrode materials.

Electron transfer across a thermal gradient

Charge transfer is a fundamental process that underlies a multitude of phenomena in chemistry and biology. Recent advances in observing and manipulating charge and heat transport at the nanoscale, and recently developed techniques for monitoring temperature at high temporal and spatial resolution, imply the need for considering electron transfer across thermal gradients. Here, a theory is developed for the rate of electron transfer and the associated heat transport between donor-acceptor pairs located at sites of different temperatures. To this end, through application of a generalized multidimensional transition state theory, the traditional Arrhenius picture of activation energy as a single point on a free energy surface is replaced with a bithermal property that is derived from statistical weighting over all configurations where the reactant and product states are equienergetic. The flow of energy associated with the electron transfer process is also examined, leading to relations between the rate of heat exchange among the donor and acceptor sites as functions of the temperature difference and the electronic driving bias. In particular, we find that an open electron transfer channel contributes to enhanced heat transport between sites even when they are in electronic equilibrium. The presented results provide a unified theory for charge transport and the associated heat conduction between sites at different temperatures.

Localized plasmonic field enhancement in shaped graphene nanoribbons

Graphene nanoribbon (GNR), as a fundamental component to support the surface plasmon waves, are envisioned to play an important role in graphene plasmonics. However, to achieve extremely confinement of the graphene surface plasmons (GSPs) is still a challenging. Here, we propose a scheme to realize the excitation of localized surface plasmons with very strong field enhancement at the resonant frequency. By sinusoidally patterning the boundaries of GNRs, a new type of plasmon mode with field energy concentrated on the shaped grating crest (crest mode) can be efficiently excited, creating a sharp notch on the transmission spectra. Specifically, the enhanced field energies are featured by 3 times of magnitude stronger than that of the unpatterned classical GNRs. Through theoretical analyses and numerical calculations, we confirm that the enhanced fields of the crest modes can be tuned not only by changing the width, period and Fermi energy as traditional ribbons, but also by varying the grating amplitude and period. This new technique of manipulating the light-graphene interaction gives an insight of modulating plasmon resonances on graphene nanostrutures, making the proposed pattern method an attractive candidate for designing optical filters, spatial light modulators, and other active plasmonic devices.

Photothermally Triggered Lipid Bilayer Phase Transition and Drug Release from Gold Nanorod and Indocyanine Green Encapsulated Liposomes

In light-activated liposomal drug delivery systems (DDSs), the light sensitivity can be obtained by a photothermal agent that converts light energy into heat. Excess heat increases the drug permeability of the lipid bilayer, and drug is released as a result. In this work, two near-IR responsive photothermal agents in a model drug delivery system are studied: either gold nanorods (GNRs) encapsulated inside the liposomes or indocyanine green (ICG) embedded into the lipid bilayer. The liposome system is exposed to light, and the heating effect is studied with fluorescent thermometers: laurdan and CdSe quantum dots (QDs). Both photothermal agents are shown to convert light into heat in an extent to cause a phase transition in the surrounding lipid bilayer. This phase transition is also proven with laurdan generalized polarization (GP). In addition to the heating results, we show that the model drug (calcein) is released from the liposomal cavity with both photothermal agents when the light power is sufficient to cause a phase transition in the lipid bilayer.

Imaging Local Electric Field Distribution by Plasmonic Impedance Microscopy

We report on imaging of local electric field on an electrode surface with plasmonic electrochemical impedance microscopy (P-EIM). The local electric field is created by putting an electrode inside a micropipet positioned over the electrode and applying a voltage between the two electrodes. We show that the distribution of the surface charge as well as the local electric field at the electrode surface can be imaged with P-EIM. The spatial distribution and the dependence of the local charge density and electric field on the distance between the micropipet and the surface are measured, and the results are compared with the finite element calculations. The work also demonstrates the possibility of integrating plasmonic imaging with scanning ion conductance microscopy (SICM) and other scanning probe microscopies.

Synergic therapy of melanoma using GNRs-MUA-PEI/siIDO2-FA through targeted gene silencing and plasmonic photothermia

IDO2 siRNA synergizes GNR-mediated anti-melanoma photothermal therapy.