Reversible coordinative binding and separation of sulfur dioxide in a robust metal-organic framework with open copper sites

A stable Zr(IV)-MOF for efficient removal of trace SO2 from flue gas in dry and humid conditions

Obtaining suitable adsorbents for selective separation of SO2 from flue gas still remains an important issue. A stable Zr(IV)-MOF (Zr-PTBA) can be conveniently synthesized through the self-assembly of a tetracarboxylic acid ligand (H4L = 4,4',4'',4'''-(1,4-phenylenebis(azanetriyl))tetrabenzoic acid) and ZrCl4 in the presence of trace water. It exhibits a three-dimensional porous structure. The BET surface area is 1112.72 m2/g and the average pore size distribution focus on 5.9, 8.0 and 9.3 Å. Interestingly, Zr-PTBA shows selective adsorption of SO2. The maximum uptake reaches 223.21 cm3/g at ambient condition. While it exhibits lower adsorption uptake of CO2 (30.50 cm3/g) and hardly adsorbs O2 (2.57 cm3/g) and N2 (1.31 cm3/g). Higher IAST selectivities of SO2/CO2 (21.9), SO2/N2 (912.7), SO2/O2 (2269.9) and SO2/CH4 (85.0) have been obtained, which reveal its' excellent gas separation performance. Breakthrough experiment further confirms its application for flue gas deep desulfurization both in dry and humid conditions. Furthermore, the gas adsorption results and mechanisms have also been studied by theoretical calculations.

Direct Observation of Enhanced Iodine Binding within a Series of Functionalized Metal-Organic Frameworks with Exceptional Irradiation Stability

Optimization of active sites and stability under irradiation are important targets for sorbent materials that might be used for iodine (I2) storage. Herein, we report the direct observation of I2 binding in a series of Cu(II)-based isostructural metal-organic frameworks, MFM-170, MFM-172, MFM-174, NJU-Bai20, and NJU-Bai21, incorporating various functional groups (-H, -CH3, - NH2, -C≡C-, and -CONH-, respectively). MFM-170 shows a reversible uptake of 3.37 g g-1 and a high packing density of 4.41 g cm-3 for physiosorbed I2. The incorporation of -NH2 and -C≡C- moieties in MFM-174 and NJU-Bai20, respectively, enhances the binding of I2, affording uptakes of up to 3.91 g g-1. In addition, an exceptional I2 packing density of 4.83 g cm-3 is achieved in MFM-174, comparable to that of solid iodine (4.93 g cm-3). In situ crystallographic studies show the formation of a range of supramolecular and chemical interactions [I···N, I···H2N] and [I···C≡C, I-C═C-I] between -NH2, -C≡C- sites, respectively, and adsorbed I2 molecules. These observations have been confirmed via a combination of solid-state nuclear magnetic resonance, X-ray photoelectron, and Raman spectroscopies. Importantly, γ-irradiation confirmed the ultraresistance of MFM-170, MFM-174, and NJU-Bai20 suggesting their potential as efficient sorbents for cleanup of radioactive waste.

Precise Construction of Nitrogen-Enriched Porous Ionic Polymers as Highly Efficient Sulfur Dioxide Adsorbent

Porous ionic polymers with unique features have exhibited high performance in various applications. However, the fabrication of functional porous ionic polymers with custom functionality and porosity for efficient removal of low-concentration SO2 remains challenging. Herein, a novel nitrogen-enriched porous ionic polymer NH2Py-PIP is prepared featuring high-content nitrogen sites (15.9 wt.%), adequate ionic sites (1.22 mmol g-1), and a hierarchical porous structure. The proposed construction pathway relies on a tailored nitrogen-functionalized cross-linker NH2Py, which effectively introduces abundant functional sites and improves the porosity of porous ionic polymers. NH2Py-PIP with a well-engineered SO2-affinity environment achieves excellent SO2/CO2 selectivity (1165) and high SO2 adsorption capacity (1.13 mmol g-1 at 0.002 bar), as well as enables highly efficient and reversible dynamic separation performance. Modeling studies further elucidate that the nitrogen sites and bromide anions collaboratively promote preferential adsorption of SO2. The unique design in this work provides new insights into constructing functional porous ionic polymers for high-efficiency separations.

High-Performance Porous Organic Polymers for Environmental Remediation of Toxic Gases

Sulfur dioxide (SO2) is a harmful acidic gas generated from power plants and fossil fuel combustion and represents a significant health risk and threat to the environment. Benzimidazole-linked polymers (BILPs) have emerged as a promising class of porous solid adsorbents for toxic gases because of their chemical and thermal stability as well as the chemical nature of the imidazole moiety. The performance of BILPs in SO2 capture was examined by synergistic experimental and theoretical studies. BILPs exhibit a significantly high SO2 uptake of up to 8.5 mmol g-1 at 298 K and 1.0 bar. The density functional theory (DFT) calculations predict that this high SO2 uptake is due to the dipole-dipole interactions between SO2 and the functionalized polymer frames through O2S(δ+)···N(δ-)-imine and O═S═O(δ-)···H(δ+)-aryl and intermolecular attraction between SO2 molecules (O═S═O(δ-)···S(δ+)O2). Moderate isosteric heats of adsorption (Qst ≈ 38 kJ mol-1) obtained from experimental SO2 uptake studies are well supported by the DFT calculations (≈40 kJ mol-1), which suggests physisorption processes enabling rapid adsorbent regeneration for reuse. Repeated adsorption experiments with almost identical SO2 uptake confirm the easy regeneration and robustness of BILPs. Moreover, BILPs possess very high SO2 adsorption selectivity at low concentration over carbon dioxide (CO2), methane (CH4), and nitrogen (N2): SO2/CO2, 19-24; SO2/CH4, 118-113; SO2/N2, 600-674. This study highlights the potential of BILPs in the desulfurization of flue gas or other gas mixtures through capturing trace levels of SO2.

Metal-organic cages for gas adsorption and separation

The unique high surface area and tunable cavity size endow metal-organic cages (MOCs) with superior performance and broad application in gas adsorption and separation. Over the past three decades, for instance, numerous MOCs have been widely explored in adsorbing diverse types of gas including energy gases, greenhouse gases, toxic gases, noble gases, etc. To gain a better understanding of the structure-performance relationships, great endeavors have been devoted to ligand design, metal node regulation, active metal site construction, cavity size adjustment, and function-oriented ligand modification, thus opening up routes toward rationally designed MOCs with enhanced capabilities. Focusing on the unveiled structure-performance relationships of MOCs towards target gas molecules, this review consists of two parts, gas adsorption and gas separation, which are discussed separately. Each part discusses the cage assembly process, gas adsorption strategies, host-guest chemistry, and adsorption properties. Finally, we briefly overviewed the challenges and future directions in the rational development of MOC-based sorbents for application in challenging gas adsorption and separation, including the development of high adsorption capacity MOCs oriented by adsorbability and the development of highly selective adsorption MOCs oriented by separation performance.

Defective copper-based metal-organic frameworks for the efficient extraction of organosulfur compounds from garlic-processing wastewater

Organosulfur compounds (OSCs) in garlic-processing wastewater are decomposed and generated to toxic and harmful substances with unpleasant odors under anaerobic conditions. Herein, were report the successful development of novel copper-based metal organic framework (Cu-MOF) adsorbents with high adsorption capacities for OSCs in aqueous media. Defect-rich Cu-MOF-X samples, with particle sizes between 360 and 750 nm, synthesized hydrothermal in the presence of acetic acid (where X denotes the molar ratio of acetic acid relative to the pentadentate MOF linker H4PPYD). OSC adsorption experiments using allicin, ajoene and 2-ethenyl-4H-1,3-dithiine (2-VDT) showed that Cu-MOF-200 delivered fast adsorption kinetics and high OSC adsorption capacities (149.02-171.33 mg g-1) owing to the pore accessibility and range of adsorption sites in the MOF. FT-IR, Raman, and XPS analyses, together with density functional theory (DFT) calculations, verified the strong yet reversible adsorption of OSCs in Cu-MOF-200. Results guide the development of improved adsorbents for OSC capture from garlic-processing wastewater.

Computational understanding of the coalescence of metallic nanoparticles: a mini review

Metallic nanoparticles exhibit extraordinary properties that differ from those of bulk materials due to their large surface area to volume ratios. Coalescence of metallic nanoparticles has a huge impact on their properties. Remarkable progress has been made by using computational methods for understanding nanoparticle coalescence. This work aims to provide a mini review on the state-of-the-art modelling and simulation of nanoparticle coalescence. First, we will discuss the outstanding performances and coalescence behaviors of metallic nanoparticles, and list some challenges in the coalescence of metallic nanoparticles. Next, we will introduce the applications of molecular dynamics and the Monte Carlo method in nanoparticle coalescence. Furthermore, we will discuss the coalescence kinetics and mechanisms of metal nanoparticles with the same element and different elements, alloy nanoparticles and metal oxide nanoparticles. Finally, we will present our perspective and conclusion.

In Situ Single-crystal X-ray Diffraction Studies of Physisorption and Chemisorption of SO2 within a Metal-Organic Framework and Its Competitive Adsorption with Water

Living on an increasingly polluted planet, the removal of toxic pollutants such as sulfur dioxide (SO2) from the troposphere and power station flue gas is becoming more and more important. The CPO-27/MOF-74 family of metal-organic frameworks (MOFs) with their high densities of open metal sites is well suited for the selective adsorption of gases that, like SO2, bind well to metals and have been extensively researched both practically and through computer simulations. However, until now, focus has centered upon the binding of SO2 to the open metal sites in this MOF (called chemisorption, where the adsorbent-adsorbate interaction is through a chemical bond). The possibility of physisorption (where the adsorbent-adsorbate interaction is only through weak intermolecular forces) has not been identified experimentally. This work presents an in situ single-crystal X-ray diffraction (scXRD) study that identifies discrete adsorption sites within Ni-MOF-74/Ni-CPO-27, where SO2 is both chemisorbed and physisorbed while also probing competitive adsorption of SO2 of these sites when water is present. Further features of this site have been confirmed by variable SO2 pressure scXRD studies, DFT calculations, and IR studies.

Linker-Guided Growth of Single-Crystal Covalent Organic Frameworks

The core features of covalent organic frameworks (COFs) are crystallinity and porosity. However, the synthesis of single-crystal COFs with monomers of diverse reactivity and adjustment of their pore structures remain challenging. Here, we show that linkers that can react with a node to form single-crystal COFs can guide other linkers that form either COFs or amorphous polymers with the node to gain single-crystal COFs with mixed components, which are homogeneous on the unit cell scale with controlled ratios. With the linker-guided crystal growth method, we created nine types of single-crystal COFs with up to nine different components, which are more complex than any known crystal. The structure of the crystal adapted approximately to that of the main component, and its pore volume could be expanded up to 8.8%. Different components lead to complex and diverse pore structures and offer the possibilities to gain positive synergies, as exemplified by a bicomponent COF with 2200 and 733% SO2 uptake capacity of that of the two pure-component counterparts at 298 K and 0.002 bar. The selectivity for separation of SO2/CO2 ranges from 1230 to 4247 for flue gas based on ideal adsorbed solution theory, recording porous crystals. The bicomponent COF also exhibits a 1300% retention time of its pure-component counterparts for SO2 in a dynamic column breakthrough experiment for deep desulfurization.

Quasi-open Cu(I) sites for efficient CO separation with high O2/H2O tolerance

Carbon monoxide (CO) separation relies on chemical adsorption but suffers from the difficulty of desorption and instability of open metal sites against O2, H2O and so on. Here we demonstrate quasi-open metal sites with hidden or shielded coordination sites as a promising solution. Possessing the trigonal coordination geometry (sp2), Cu(I) ions in porous frameworks show weak physical adsorption for non-target guests. Rational regulation of framework flexibility enables geometry transformation to tetrahedral geometry (sp3), generating a fourth coordination site for the chemical adsorption of CO. Quantitative breakthrough experiments at ambient conditions show CO uptakes up to 4.1 mmol g-1 and CO selectivity up to 347 against CO2, CH4, O2, N2 and H2. The adsorbents can be completely regenerated at 333-373 K to recover CO with a purity of >99.99%, and the separation performances are stable in high-concentration O2 and H2O. Although CO leakage concentration generally follows the structural transition pressure, large amounts (>3 mmol g-1) of ultrahigh-purity (99.9999999%, 9N; CO concentration < 1 part per billion) gases can be produced in a single adsorption process, demonstrating the usefulness of this approach for separation applications.

Synergistic Nitrogen Binding Sites in a Metal-Organic Framework for Efficient N2 /O2 Separation

Porous materials with d3 electronic configuration open metal sites have been proved to be effective adsorbents for N2 capture and N2 /O2 separation. However, the reported materials remain challenging to address the trade-off between adsorption capacity and selectivity. Herein, we report a robust MOF, MIL-102Cr, that features two binding sites, can synergistically afford strong interactions for N2 capture. The synergistic adsorption site exhibits a benchmark Qst of 45.0 kJ mol-1 for N2 among the Cr-based MOFs, a record-high volumetric N2 uptake (31.38 cm3  cm-3 ), and highest N2 /O2 selectivity (13.11) at 298 K and 1.0 bar. Breakthrough experiments reveal that MIL-102Cr can efficiently capture N2 from a 79/21 N2 /O2 mixture, providing a record 99.99 % pure O2 productivity of 0.75 mmol g-1 . In situ infrared spectroscopy and computational modelling studies revealed that a synergistic adsorption effect by open Cr(III) and fluorine sites was accountable for the strong interactions between the MOF and N2 .

Modulator-Dependent Dynamics Synergistically Enabled Record SO2 Uptake in Zr(IV) Metal-Organic Frameworks Based on Pyrene-Cored Molecular Quadripod Ligand

Developing innovative porous solid sorbents for the capture and storage of toxic SO2 is crucial for energy-efficient transportation and subsequent processing. Nonetheless, the quest for high-performance SO2 sorbents, characterized by exceptional uptake capacity, minimal regeneration energy requirements, and outstanding recyclability under ambient conditions, remains a significant challenge. In this study, we present the design of a unique tertiary amine-embedded, pyrene-based quadripod-shaped ligand. This ligand is then assembled into a highly porous Zr-metal-organic framework (MOF) denoted as Zr-TPA, which exhibits a newly discovered 3,4,8-c woy net structure. Remarkably, our Zr-TPA MOF achieved an unprecedented SO2 sorption capacity of 22.7 mmol g-1 at 298 K and 1 bar, surpassing those of all previously reported solid sorbents. We elucidated the distinct SO2 sorption behaviors observed in isostructural Zr-TPA variants synthesized with different capping modulators (formate, acetate, benzoate, and trifluoroacetate, abbreviated as FA, HAc, BA, and TFA, respectively) through computational analyses. These analyses revealed unexpected SO2-induced modulator-node dynamics, resulting in transient chemisorption that enhanced synergistic SO2 sorption. Additionally, we conducted a proof-of-concept experiment demonstrating that the captured SO2 in Zr-TPA-FA can be converted in situ into a valuable pharmaceutical intermediate known as aryl N-aminosulfonamide, with a high yield and excellent recyclability. This highlights the potential of robust Zr-MOFs for storing SO2 in catalytic applications. In summary, this work contributes significantly to the development of efficient SO2 solid sorbents and advances our understanding of the molecular mechanisms underlying SO2 sorption in Zr-MOF materials.

Deep eutectic solvent-based blended membranes for ultra-super selective separation of SO2

SO2 is a major atmospheric pollutant leading to acid rain and smog. As a new generation of green solvents, deep eutectic solvents (DESs) have been widely investigated for gas capture. Nevertheless, studies on DES-based membranes for SO2 separation are yet minimal. Herein, we devised polymer/DES blended membranes comprising 1-butyl-3-methyl-imidazolium bromide ([Bmim]Br)/diethylene glycol (DEG) DES and poly (vinylidene fluoride) (PVDF), and these membranes were firstly used for selective separation of SO2 from N2 and CO2. The permeability of SO2 reaches up to 17480 Barrer (0.20 bar, 40 ºC) in PVDF/DES blended membrane containing 50 wt% of [Bmim]Br/DEG (2:1), with ultrahigh SO2/N2 and SO2/CO2 selectivity of 3690 and 211 obtained, respectively, far exceeding those in the state-of-the-art membranes reported in literature. The highly-reversible multi-site interaction between SO2 and [Bmim]Br/DEG DES was revealed by spectroscopic analysis. Furthermore, the PVDF/DES blended membrane was also able to efficiently and stably separate SO2/CO2/N2 (2.5/15/82.5%) mixed gas for at least 100 h. This work demonstrates for the first time that [Bmim]Br-based DESs are very efficient media for membrane separation of SO2. The easy preparation, low cost and high performance enable polymer/DES blended membranes to be promising candidates for flue gas desulfurization.

Analysis and Refinement of Host-Guest Interactions in Metal-Organic Frameworks

ConspectusMetal-organic frameworks (MOFs) are a class of hybrid porous materials characterized by their periodic assembly using metal ions and organic ligands through coordination bonds. Their high crystallinity, extensive surface area, and adjustable pore sizes make them promising candidates for a wide array of applications. These include gas adsorption and separation, substrate binding, and catalysis, of relevance to tackling pressing global issues such as climate change, energy challenges, and pollution. In comparison to traditional porous materials such as zeolites and activated carbons, the design flexibility of organic ligands in MOFs, coupled with their orderly arrangement with associated metal centers, allows for the precise engineering of uniform pore environments. This unique feature enables a rich variety of interactions between the MOF host and adsorbed gas molecules, which are fundamental to understanding the observed uptake capacity and selectivity for target gas molecules and thus the overall performance of the material.In this Account, a data set for three-dimensional MOFs has been constructed based upon the structural analysis of host-guest interactions using the largest experimental database, the Cambridge Structural Database (CSD). A full screening was performed on structures with guest molecules of H2, C2H2, CO2, and SO2, and the relationship between the primary binding site, the isosteric heats of adsorption (Qst), and the adsorption uptake was extracted and established. We review the methodologies to refine host-guest interactions based primarily on our studies on the host-guest chemistry of MOFs. The methods include ligand functionalization, variation of metal centers, formation of defects, addition of single atom sites, and control of pore size and structure. In situ structural and dynamic investigations using diffraction and spectroscopic techniques are powerful tools to visualize the details of host-guest interactions upon the above modifications, affording key insights into functional performance at a molecular level. Finally, we give an outlook of future research priorities in the study of host-guest chemistry in MOF materials. We hope this Account will encourage the rational development and improvement of future MOF-based sorbents for applications in challenging gas adsorption, separations, and catalysis.

Induced-Fit-Identification in a Rigid Metal-Organic Framework for ppm-Level CO2 Removal and Ultra-Pure CO Enrichment

Removing CO2 from crude syngas via physical adsorption is an effective method to yield eligible syngas. However, the bottleneck in trapping ppm-level CO2 and improving CO purity at higher working temperatures are major challenges. Here we report a thermoresponsive metal-organic framework (1 a-apz), assembled by rigid Mg2 (dobdc) (1 a) and aminopyrazine (apz), which not only affords an ultra-high CO2 capacity (145.0/197.6 cm3  g-1 (0.01/0.1 bar) at 298 K) but also produces ultra-pure CO (purity ≥99.99 %) at a practical ambient temperature (TA ). Several characterization results, including variable-temperature tests, in situ high-resolution synchrotron X-ray diffraction (HR-SXRD), and simulations, explicitly unravel that the excellent property is attributed to the induced-fit-identification in 1 a-apz that comprises self-adaption of apz, multiple binding sites, and complementary electrostatic potential (ESP). Breakthrough tests suggest that 1 a-apz can remove CO2 from 1/99 CO2 /CO mixtures at practical 348 K, yielding 70.5 L kg-1 of CO with ultra-high purity of ≥99.99 %. The excellent separation performance is also revealed by separating crude syngas that contains quinary mixtures of H2 /N2 /CH4 /CO/CO2 (46/18.3/2.4/32.3/1, v/v/v/v/v).

Crossover Sorption of C2 H2 /CO2 and C2 H6 /C2 H4 in Soft Porous Coordination Networks

Porous sorbents are materials that are used for various applications, including storage and separation. Typically, the uptake of a single gas by a sorbent decreases with temperature, but the relative affinity for two similar gases does not change. However, in this study, we report a rare example of "crossover sorption," in which the uptake capacity and apparent affinity for two similar gases reverse at different temperatures. We synthesized two soft porous coordination polymers (PCPs), [Zn2 (L1)(L2)2 ]n (PCP-1) and [Zn2 (L1)(L3)2 ]n (PCP-2) (L1= 1,4-bis(4-pyridyl)benzene, L2=5-methyl-1,3-di(4-carboxyphenyl)benzene, and L3=5-methoxy-1,3-di(4-carboxyphenyl)benzene). These PCPs exhibits structural changes upon gas sorption and show the crossover sorption for both C2 H2 /CO2 and C2 H6 /C2 H4 , in which the apparent affinity reverse with temperature. We used in situ gas-loading single-crystal X-ray diffraction (SCXRD) analysis to reveal the guest inclusion structures of PCP-1 for C2 H2 , CO2 , C2 H6 , and C2 H4 gases at various temperatures. Interestingly, we observed three-step single-crystal to single-crystal (sc-sc) transformations with the different loading phases under these gases, providing insight into guest binding positions, nature of host-guest or guest-guest interactions, and their phase transformations upon exposure to these gases. Combining with theoretical investigation, we have fully elucidated the crossover sorption in the flexible coordination networks, which involves a reversal of apparent affinity and uptake of similar gases at different temperatures. We discovered that this behaviour can be explained by the delicate balance between guest binding and host-guest and guest-guest interactions.

Synergistic Adsorption and In Situ Catalytic Conversion of SO2 by Transformed Bimetal-Phenolic Functionalized Biomass

SO2 removal is critical to flue gas purification. However, based on performance and cost, materials under development are hardly adequate substitutes for active carbon-based materials. Here, we engineered biomass-derived nanostructured carbon nanofibers integrated with highly dispersed bimetallic Ti/CoOx nanoparticles through the thermal transition of metal-phenolic functionalized industrial leather wastes for synergistic SO2 adsorption and in situ catalytic conversion. The generation of surface-SO32- and peroxide species (O22-) by Ti/CoOx achieved catalytic conversion of adsorbed SO2 into value-added liquid H2SO4, which can be discharged from porous nanofibers. This approach can also avoid the accumulation of the adsorbed SO2, thereby achieving high desulfurization activity and a long operating life over 6000 min, preceding current state-of-the-art active carbon-based desulfurization materials. Combined with the techno-economic and carbon footprint analysis from 36 areas in China, we demonstrated an economically viable and scalable solution for real-world SO2 removal on the industrial scale.

MFM-300(Sc): a chemically stable Sc(III)-based MOF material for multiple applications

Developing robust multifunctional metal-organic frameworks (MOFs) is the key to advancing the further deployment of MOFs into relevant applications. Since the first report of MFM-300(Sc) (MFM = Manchester Framework Material, formerly known as NOTT-400), the development of applications of this robust microporous MOF has only grown. In this review, a summary of the applications of MFM-300(Sc), as well as some emerging advanced applications, have been discussed. The adsorption properties of MFM-300(Sc) are presented systematically. Particularly, this contribution is focused on acid and corrosive gas adsorption. In addition, recent applications for catalysis based on the outstanding hemilabile Sc-O bond character are highlighted. Finally, some new research areas are introduced, such as host-guest chemistry and biomedical applications. This highlight aims to showcase the recent advances and the potential for developing new applications of this promising material.

Feasible bottom-up development of conjugated microporous polymers (CMPs) for boosting the deep removal of sulfur dioxide

A pain-point for material development is that computer-screened structures are usually difficult to realize in experiments. Herein, considering that linkages are crucial for building functional nanoporous polymers with diverse functionalities, we develop an efficient approach for constructing target-specific conjugated microporous polymers (CMPs) based on screening feasible polymerization pathways. Taking the deep removal of SO2 from a SO2/CO2 mixture as the specific target, we precisely screen the linkages and fabricate different CMPs by manipulating the porosity and hydrophobicity. Based on the optimized Buchwald-Hartwig amination, the obtained CMPs can achieve SO2/CO2 selectivity as high as 113 and a moderate Qst of 30 kJ mol-1 for feasible regeneration. Furthermore, the potential of CMPs for practical SO2/CO2 separation is demonstrated through continued breakthrough tests. The SO2 binding sites are consistent with the screening results and proved by in situ Fourier transform infrared spectroscopy and grand canonical Monte Carlo simulation, providing solid feasibility for synthesis realizability for future boosts of task-specific CMPs.

Exploring the Effect of Different Secondary Building Units as Lewis Acid Sites in MOF Materials for the CO2 Cycloaddition Reaction

In order to explore the catalytic effect of different Lewis acid sites (LASs) in the CO2 cycloaddition reaction, different secondary building units and N-rich organic ligand 4,4',4″-s-triazine-1,3,5-triyltri-p-aminobenzoate were assembled to construct six reported MOF materials: [Cu3(tatab)2(H2O)3]·8DMF·9H2O (1), [Cu3(tatab)2(H2O)3]·7.5H2O (2), [Zn4O(tatab)2]·3H2O·17DMF (3), [In3O(tatab)2(H2O)3](NO3)·15DMA (4), [Zr6O4(OH)7(tatab)(Htatab)3(H2O)3]·xGuest (5), and [Zr6O4(OH)4(tatab)4(H2O)3]·xGuest (6) (DMF = N,N-dimethylformamide, and DMA = N,N-dimethylacetamide). Large pore sizes of compound 2 enhance the concentration of substrates, and the multi-active sites inside its framework synergistically promote the process of the CO2 cycloaddition reaction. Such advantages endow compound 2 with the best catalytic performance among the six compounds and surpass many of the reported MOF-based catalysts. Meanwhile, the comparison of the catalytic efficiency indicated that Cu-paddlewheel and Zn4O display better catalytic performances than In3O and Zr6 cluster. The experiments investigate the catalytic effects of LAS types and prove that it is feasible to improve CO2 fixation property by introducing multi-active sites into MOFs.

Temperature-dependent rearrangement of gas molecules in ultramicroporous materials for tunable adsorption of CO2 and C2H2

The interactions between adsorbed gas molecules within porous metal-organic frameworks are crucial to gas selectivity but remain poorly explored. Here, we report the modulation of packing geometries of CO₂ and C₂H₂ clusters within the ultramicroporous CUK-1 material as a function of temperature. In-situ synchrotron X-ray diffraction reveals a unique temperature-dependent reversal of CO₂ and C₂H₂ adsorption affinities on CUK-1, which is validated by gas sorption and dynamic breakthrough experiments, affording high-purity C₂H₂ (99.95%) from the equimolar mixture of C₂H₂/CO₂ via a one-step purification process. At low temperatures (<253 K), CUK-1 preferentially adsorbs CO₂ with both high selectivity (>10) and capacity (170 cm³ g^-1) owing to the formation of CO₂ tetramers that simultaneously maximize the guest-guest and host-guest interactions. At room temperature, conventionally selective adsorption of C₂H₂ is observed. The selectivity reversal, structural robustness, and facile regeneration of CUK-1 suggest its potential for producing high-purity C₂H₂ by temperature-swing sorption.

Design of a MOF-based nano-trap for the efficient separation of propane from propylene

A parallel Cu paddle wheel structure was developed to form an efficient C₃H₆ nano-trap. Benefiting from having this trap, ATC-Cu showed a very high capacity for binding C₃H₆ and high C₃H₆/C₃H₈ selectivity at 298 K.

Monitoring the Activation of Open Metal Sites in [FexM3-x(μ3-O)] Cluster-Based Metal-Organic Frameworks by Single-Crystal X-ray Diffraction

While trinuclear [FexM3-x(μ3-O)] cluster-based metal-organic frameworks (MOFs) have found wide applications in gas storage and catalysis, it is still challenging to identify the structure of open metal sites obtained through proper activations and understand their influence on the adsorption and catalytic properties. Herein, we use in situ variable-temperature single-crystal X-ray diffraction to monitor the structural evolution of [FexM3-x(μ3-O)]-based MOFs (PCN-250, M = Ni2+, Co2+, Zn2+, Mg2+) upon thermal activation and provide the snapshots of metal sites at different temperatures. The exposure of open Fe3+ sites was observed along with the transformation of Fe3+ coordination geometries from octahedron to square pyramid. Furthermore, the effect of divalent metals in heterometallic PCN-250 was studied for the purpose of reducing the activation temperature and increasing the number of open metal sites. The metal site structures were corroborated by X-ray absorption and infrared spectroscopy. These results will not only guide the pretreatment of [FexM3-x(μ3-O)]-based MOFs but also corroborate spectral and computational studies on these materials.

Metal-Organic Frameworks for Greenhouse Gas Applications

Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO₂ ), water vapor (H₂ O), methane (CH₄ ), nitrous oxide (N₂ O), ozone (O₃ ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.

Silver nanoparticle enhanced metal-organic matrix with interface-engineering for efficient photocatalytic hydrogen evolution

Integrating plasmonic nanoparticles into the photoactive metal-organic matrix is highly desirable due to the plasmonic near field enhancement, complementary light absorption, and accelerated separation of photogenerated charge carriers at the junction interface. The construction of a well-defined, intimate interface is vital for efficient charge carrier separation, however, it remains a challenge in synthesis. Here we synthesize a junction bearing intimate interface, composed of plasmonic Ag nanoparticles and matrix with silver node via a facile one-step approach. The plasmonic effect of Ag nanoparticles on the matrix is visualized through electron energy loss mapping. Moreover, charge carrier transfer from the plasmonic nanoparticles to the matrix is verified through ultrafast transient absorption spectroscopy and in-situ photoelectron spectroscopy. The system delivers highly efficient visible-light photocatalytic H₂ generation, surpassing most reported metal-organic framework-based photocatalytic systems. This work sheds light on effective electronic and energy bridging between plasmonic nanoparticles and organic semiconductors.

Crystallographic Mapping and Tuning of Water Adsorption in Metal-Organic Frameworks Featuring Distinct Open Metal Sites

Crucial steps toward designing water sorption materials and fine-tuning their properties for specific applications include precise identification of adsorption sites and establishment of rigorous molecular-level insight into the water adsorption process. We report stepwise crystallographic mapping and density functional theory computations of adsorbed water molecules in ALP-MOF-1, a metal-organic framework decorated with distinct open metal sites and carbonyl functional groups that serve as water anchoring sites for seeding the nucleation of a complex water network. Identification of an unusual water adsorption step in ALP-MOF-1 motivated the tuning of metal ion composition to adjust water uptake. These studies provide direct evidence that the identity of the open metal sites in MOFs can dramatically affect water adsorption behavior between 0 and ∼20% RH and that multiple proximal water anchoring sites along the MOF skeleton facilitate water uptake which could be potentially useful for applications requiring rapid and energetically facile water sorption.

Structural and Dynamic Analysis of Sulphur Dioxide Adsorption in a Series of Zirconium‐Based Metal–Organic Frameworks

We report reversible high capacity adsorption of SO₂ in robust Zr‐based metal–organic framework (MOF) materials. Zr‐bptc (H₄bptc=biphenyl‐3,3′,5,5′‐tetracarboxylic acid) shows a high SO₂ uptake of 6.2 mmol g⁻¹ at 0.1 bar and 298 K, reflecting excellent capture capability and removal of SO₂ at low concentration (2500 ppm). Dynamic breakthrough experiments confirm that the introduction of amine, atomically‐dispersed Cu^II or heteroatomic sulphur sites into the pores enhance the capture of SO₂ at low concentrations. The captured SO₂ can be converted quantitatively to a pharmaceutical intermediate, aryl N‐aminosulfonamide, thus converting waste to chemical values. In situ X‐ray diffraction, infrared micro‐spectroscopy and inelastic neutron scattering enable the visualisation of the binding domains of adsorbed SO₂ molecules and host–guest binding dynamics in these materials at the atomic level. Refinement of the pore environment plays a critical role in designing efficient sorbent materials.

Metal-organic framework-based materials for the abatement of air pollution and decontamination of wastewater

Developing new and efficient technologies for environmental remediation is becoming significant due to the increase in global concerns such as climate change, severe epidemics, and energy crises. Air pollution, primarily due to increased levels of H₂S, SO_x, NH₃, NO_x, CO, volatile organic compounds (VOC), and particulate matter (PM) in the atmosphere, has a significant impact on public health, and exhaust gases harm the natural sulfur, nitrogen, and carbon cycles. Similarly, wastewater discharged to the environment with metal ions, herbicides, pharmaceuticals, personal care products, dyes, and aromatics/organic compounds is a risk for health since it may lead to an outbreak of waterborne pathogens and increase the exposure to endocrine-disrupting agents. Therefore, developing new and efficient air and water quality management systems is critical. Metal-organic frameworks (MOFs) are novel materials for which the main application areas include gas storage and separation, water harvesting from the atmosphere, chemical sensing, power storage, drug delivery, and food preservation. Due to their versatile structural motifs that can be modified during synthesis, MOFs also have a great promise for green applications including air and water pollution remediation. The motivation to use MOFs for environmental applications prompted the modification of their structures via the addition of metal and functional groups, as well as the creation of heterostructures by mixing MOFs with other nanomaterials, to effectively remove hazardous contaminants from wastewater and the atmosphere. In this review, we focus on the state-of-the-art environmental applications of MOFs, particularly for water treatment and air pollution, by highlighting the groundbreaking studies in which MOFs have been used as adsorbents, membranes, and photocatalysts for the abatement of air and water pollution. We finally address the opportunities and challenges for the environmental applications of MOFs.

Direct Location of Organic Molecules in Framework Materials by Three-Dimensional Electron Diffraction

In the study of framework materials, probing interactions between frameworks and organic molecules is one of the most important tasks, which offers us a fundamental understanding of host-guest interactions in gas sorption, separation, catalysis, and framework structure formation. Single-crystal X-ray diffraction (SCXRD) is a conventional method to locate organic species and study such interactions. However, SCXRD demands large crystals whose quality is often vulnerable to, e.g., cracking on the crystals by introducing organic molecules, and this is a major challenge to use SCXRD for structural analysis. With the development of three-dimensional electron diffraction (3D ED), single-crystal structural analysis can be performed on very tiny crystals with sizes on the nanometer scale. Here, we analyze two framework materials, SU-8 and SU-68, with organic molecules inside their inorganic crystal structures. By applying 3D ED, with fast data collection and an ultralow electron dose (0.8-2.6 e^- Å^-2), we demonstrate for the first time that each nonhydrogen atom from the organic molecules can be ab initio located from structure solution, and they are shown as distinct and well-separated peaks in the difference electrostatic potential maps showing high accuracy and reliability. As a result, two different spatial configurations are identified for the same guest molecule in SU-8. We find that the organic molecules interact with the framework through strong hydrogen bonding, which is the key to immobilizing them at well-defined positions. In addition, we demonstrate that host-guest systems can be studied at room temperature. Providing high accuracy and reliability, we believe that 3D ED can be used as a powerful tool to study host-guest interactions, especially for nanocrystals.

Combined Superbase Ionic Liquid Approach to Separate CO2 from Flue Gas

Superbase ionic liquids (ILs) with a trihexyltetradecylphosphonium cation and a benzimidazolide ([P₆₆₆₁₄][Benzim]) or tetrazolide ([P₆₆₆₁₄][Tetz]) anion were investigated in a dual-IL system allowing the selective capture and separation of CO₂ and SO₂, respectively, under realistic gas concentrations. The results show that [P₆₆₆₁₄][Tetz] is capable of efficiently capturing SO₂ in preference to CO₂ and thus, in a stepwise separation process, protects [P₆₆₆₁₄][Benzim] from the negative effects of the highly acidic contaminant. This results in [P₆₆₆₁₄][Benzim] maintaining >53% of its original CO₂ uptake capacity after 30 absorption/desorption cycles in comparison to the 89% decrease observed after 11 cycles when [P₆₆₆₁₄][Tetz] was not present. Characterization of the ILs post exposure revealed that small amounts of SO₂ were irreversibly absorbed to the [Benzim]^- anion responsible for the decrease in CO₂ capacity. While optimization of this dual-IL system is required, this feasibility study demonstrates that [P₆₆₆₁₄][Tetz] is a suitable sorbent for reversibly capturing SO₂ and significantly extending the lifetime of [P₆₆₆₁₄][Benzim] for CO₂ uptake.

Stable Porous Organic Polymers Used for Reversible Adsorption and Efficient Separation of Trace SO2

The development of porous solid adsorbents for selective adsorption and separation of SO₂ has attracted much attention recently. Herein, we design porous organic polymers (POPs) decorated with pyridine ligands as building units (POP-Py) through a radical polymerization of the 2,5-divinylpyridine (v-Py) monomer. Due to its high BET surface area, nanoporosity, and excellent stability, the prepared POP-Py can be used for reversible adsorption and efficient separation of SO₂. The POP-Py possesses a SO₂ capacity of 10.8 mmol g^-1 at 298 K and 1.0 bar, which can be well retained after 6 recycles, showing an excellent reversible adsorption capacity. The POP-Py also shows superior separation performance for SO₂ from a ternary SO₂/CO₂/N₂ mixture (0.17/15/84.83v%), giving a breakthrough time and a saturated SO₂ capacity at 178 min g^-1 and 0.4 mmol g^-1. The retention time was well maintained even under high moisture conditions, confirming its superior water resistance. Furthermore, when other vinyl-functionalized organic ligand monomers (bipyridine, pyrimidine, and pyrazine) were employed for radical polymerization, all of the resultant porous organic ligand polymers (POP-BPy, POP-PyI, and POP-PyA) exhibited superior performance for reversible adsorption and efficient separation of SO₂. The combined features of reversible adsorption, efficient separation, and water resistance are important for the industrial applications of these materials as SO₂ adsorbents.

Efficient Separation of Trace SO2 from SO2/CO2/N2 Mixtures in a Th-Based MOF

The emission of sulfur dioxide (SO₂) from flue gases is harmful since trace SO₂ impairs human health and the natural environment. Therefore, developing new metal organic frameworks (MOFs) to capture this toxic molecule is of great importance in flue gas desulfurization. In this work, we synthesized a new MOF, namely, ECUT-Th-60, which consists of two distinct channels (3.0 Å × 4.1 Å and 2.3 Å × 4.8 Å). It shows SO₂ uptakes of around 2.5 mmol/g at 0.1 kPa and 3.35 mmol/g at 1 bar, which are higher than those of CO₂ and N₂ under identical conditions. Both simulated and experimental breakthrough tests proved that ECUT-Th-60 can separate trace SO₂ from SO₂/CO₂ mixtures. Impressively, complete separation of SO₂ from SO₂/CO₂/N₂ mixtures under both dry and humid conditions was also proved in ECUT-Th-60, predicting its potential application in flue gas desulfurization.

Adsorption of Sulfur Dioxide in Cu(II)-Carboxylate Framework Materials: The Role of Ligand Functionalization and Open Metal Sites

The development of efficient sorbent materials for sulfur dioxide (SO₂) is of key industrial interest. However, due to the corrosive nature of SO₂, conventional porous materials often exhibit poor reversibility and limited uptake toward SO₂ sorption. Here, we report high adsorption of SO₂ in a series of Cu(II)-carboxylate-based metal–organic framework materials. We describe the impact of ligand functionalization and open metal sites on the uptake and reversibility of SO₂ adsorption. Specifically, MFM-101 and MFM-190(F) show fully reversible SO₂ adsorption with remarkable capacities of 18.7 and 18.3 mmol g^–1, respectively, at 298 K and 1 bar; the former represents the highest reversible uptake of SO₂ under ambient conditions among all porous solids reported to date. In situ neutron powder diffraction and synchrotron infrared microspectroscopy enable the direct visualization of binding domains of adsorbed SO₂ molecules as well as host–guest binding dynamics. We have found that the combination of open Cu(II) sites and ligand functionalization, together with the size and geometry of metal–ligand cages, plays an integral role in the enhancement of SO₂ binding.

Heteroatom-Doped Porous Carbons as Effective Adsorbers for Toxic Industrial Gasses

Ammonia (NH3), often stored in large quantities before being used in the production of fertilizer, and sulfur dioxide (SO2), a byproduct of fossil fuel consumption, particularly the burning of coal, are highly toxic and corrosive gases that pose a significant danger to humans if accidentally released. Therefore, developing advanced materials to enable their effective capture and safe storage is highly desired. Herein, advanced benzimidazole-derived carbons (BIDCs) with an exceptional capacity for NH3 and SO2 have been designed and tested. These heteroatom-doped porous carbon adsorbents were synthesized by thermolysis of imidazolate-potassium salts affording high surface area and controlled heteroatom content to optimize for rapid NH3 and SO2 gas uptake and release under practical conditions. According to gas uptake measurements, these nitrogen-doped carbons exhibit exceptional gas adsorption capacity, with BIDC-3-800 adsorbing 21.42 mmol/g SO2 at 298 K and 1 bar, exceeding most reported porous materials and BIDC-2-700 adsorbing 14.26 mmol/g NH3 under the same conditions. The NH3 uptake of BIDC-2-700 surpassed reported activated carbons and is among the best adsorbents including metal organic frameworks (MOFs). Our synthetic method allows for control over both textural and chemical properties of the carbon and enables heteroatom functionality to be incorporated directly into the carbon framework without the need for postsynthetic modification. These materials were also tested for recyclability; all adsorbents showed almost complete retention of their initial gas uptake capacity during recyclability studies and maintained their structural integrity and their previous adsorption capacity of both NH3 and SO2, highlighting their potential for practical application.

Copper-based metal-organic frameworks for biomedical applications

Metal-organic frameworks (MOFs) are a class of important porous, crystalline materials composed of metal ions (clusters) and organic ligands. Owing to the unique redox chemistry, photochemical and electrical property, and catalytic activity of Cu^2+/+, copper-based MOFs (Cu-MOFs) have been recently and extensively explored in various biomedical fields. In this review, we first make a brief introduction to the synthesis of Cu-MOFs and their composites, and highlight the recent synthetic strategies of two most studied representatives, three-dimensional HKUST-1 and two-dimensional Cu-TCPP. The recent advances of Cu-MOFs in the applications of cancer treatment, bacterial inhibition, biosensing, biocatalysis, and wound healing are summarized and discussed. Furthermore, we propose a prospect of the future development of Cu-MOFs in biomedical fields and beyond.

Multi-Level Computational Screening of in Silico Designed MOFs for Efficient SO2 Capture

SO₂ presence in the atmosphere can cause significant harm to the human and environment through acid rain and/or smog formation. Combining the operational advantages of adsorption-based separation and diverse nature of metal-organic frameworks (MOFs), cost-effective separation processes for SO₂ emissions can be developed. Herein, a large database of hypothetical MOFs composed of >300,000 materials is screened for SO₂/CH₄, SO₂/CO₂, and SO₂/N₂ separations using a multi-level computational approach. Based on a combination of separation performance metrics (adsorption selectivity, working capacity, and regenerability), the best materials and the most common functional groups in those most promising materials are identified for each separation. The top bare MOFs and their functionalized variants are determined to attain SO₂/CH₄ selectivities of 62.4-16899.7, SO₂ working capacities of 0.3-20.1 mol/kg, and SO₂ regenerabilities of 5.8-98.5%. Regarding SO₂/CO₂ separation, they possess SO₂/CO₂ selectivities of 13.3-367.2, SO₂ working capacities of 0.1-17.7 mol/kg, and SO₂ regenerabilities of 1.9-98.2%. For the SO₂/N₂ separation, their SO₂/N₂ selectivities, SO₂ working capacities, and SO₂ regenerabilities span the ranges of 137.9-67,338.9, 0.4-20.6 mol/kg, and 7.0-98.6%, respectively. Besides, using breakdowns of gas separation performances of MOFs into functional groups, separation performance limits of MOFs based on functional groups are identified where bare MOFs (MOFs with multiple functional groups) tend to show the smallest (largest) spreads.

Direct Observation of Ammonia Storage in UiO-66 Incorporating Cu(II) Binding Sites

The presence of active sites in metal-organic framework (MOF) materials can control and affect their performance significantly in adsorption and catalysis. However, revealing the interactions between the substrate and active sites in MOFs at atomic precision remains a challenging task. Here, we report the direct observation of binding of NH3 in a series of UiO-66 materials containing atomically dispersed defects and open Cu(I) and Cu(II) sites. While all MOFs in this series exhibit similar surface areas (1111-1135 m2 g-1), decoration of the -OH site in UiO-66-defect with Cu(II) results in a 43% enhancement of the isothermal uptake of NH3 at 273 K and 1.0 bar from 11.8 in UiO-66-defect to 16.9 mmol g-1 in UiO-66-CuII. A 100% enhancement of dynamic adsorption of NH3 at a concentration level of 630 ppm from 2.07 mmol g-1 in UiO-66-defect to 4.15 mmol g-1 in UiO-66-CuII at 298 K is observed. In situ neutron powder diffraction, inelastic neutron scattering, and electron paramagnetic resonance, solid-state nuclear magnetic resonance, and infrared spectroscopies, coupled with modeling reveal that the enhanced NH3 uptake in UiO-66-CuII originates from a {Cu(II)···NH3} interaction, with a reversible change in geometry at Cu(II) from near-linear to trigonal coordination. This work represents the first example of structural elucidation of NH3 binding in MOFs containing open metal sites and will inform the design of new efficient MOF sorbents by targeted control of active sites for NH3 capture and storage.

High capacity ammonia adsorption in a robust metal-organic framework mediated by reversible host-guest interactions

To understand the exceptional adsorption of ammonia (NH₃) in MFM-300(Sc) (19.5 mmol g⁻¹ at 273 K and 1 bar without hysteresis), we report a systematic investigation of the mechanism of adsorption by a combination of in situ neutron powder diffraction, inelastic neutron scattering, synchrotron infrared microspectroscopy, and solid-state ⁴⁵Sc NMR spectroscopy. These complementary techniques reveal the formation of reversible host–guest supramolecular interactions, which explains directly the observed excellent reversibility of this material over 90 adsorption–desorption cycles.

To understand the exceptional adsorption of NH₃ in MFM-300(Sc), we report a full study of the mechanism of adsorption by in situ neutron diffraction, inelastic neutron scattering, synchrotron infrared microspectroscopy, and ⁴⁵Sc NMR spectroscopy.

The Reversible Removal of SO2 by Amino Functionalized ZIF8 with 5-Aminotetrazole via Post-Synthesis Modification

The post-synthesis modification is a highly efficient method for the modification of Metal-organic framework (MOF) materials, which has been used to synthesize MOF materials purposefully that cannot be prepared by direct synthesis and impregnation method. In this work, amino modified ZIF8 with 5-aminotetrazole was prepared by the post synthesis modification method and was employed to reversibly remove SO2 from flue gas. Based on the characterization and analysis of X-ray diffraction (XRD), Scanning Electron Microscope (SEM), and Brunner Emmet Teller (BET), it was found that the functionalized ZIF8 (Zn(5-ATZ)1.5) was a microporous material with a two-dimensional nano-layered structure. According to the SO2 adsorption experiments, the adsorption capacity of SO2 at the concentration of 1.6% vol can reach to 122 mg/g under the optimal conditions (25 °C, 2865 h−1). Five successive adsorption-desorption experiments exhibited that Zn(5-ATZ)1.5 had excellent regeneration performance. The characterization results of Raman Spectra (Raman) and X-ray photoelectron spectroscopy (XPS) as well as the DFT simulation calculations revealed that SO2 mainly interacted with Zn(5-ATZ)1.5 by hydrogen bonds between O of SO2 and amino H in the Zn(5-ATZ)1.5, and the interaction of SO2 with amino N and 5-aminotetrazole N by forming a non-covalent charge transfer complex. This work suggested that Zn(5-ATZ)1.5 is an excellent potential sorbent for SO2 removal.

Metal Centers and Organic Ligands Determine Electrochemistry of Metal-Organic Frameworks

The properties and applications of metal-organic frameworks (MOFs) can be tuned by their metal centers and organic ligands. To reveal experimentally and theoretically the influence of metal centers and ligands on electrochemical performance of MOFs, three MOFs with copper or zinc centers and organic ligands of 2-methylimidazole (2MI) or 1,3,5-benzenetricarboxylic acid (H₃ BTC) are synthesized and characterized in this study. 2D and porous Cu-2MI exhibits a larger active area, faster electron transfer capability, and stronger adsorption capacity than bulk Cu-BTC and dodecahedron Zn-2MI. Density functional theory calculations of adsorption ability of three MOFs toward xanthine (XA), hypoxanthine (HXA), and malachite green (MG) prove that 2D Cu-2MI has the strongest adsorption energies to three targets. Rotating disk electrode measurements reveal that 2D Cu-2MI features the biggest intrinsic heterogeneous rate constant toward three analytes. On 2D Cu-2MI sensitive and selective monitoring of XA, HXA, and MG is then achieved using differential pulse voltammetry. Their monitoring in real samples on 2D Cu-2MI is accurate and comparable with that using high-performance liquid chromatography. In summary, regulation of electrochemical sensing features of MOFs is realized through defining selected metal centers and organic ligands.