Surface Charge Properties of and Cu(II) Adsorption by Spores of the Marine Bacillus sp. Strain SG-1

Rhizospheric bacteria: the key to sustainable heavy metal detoxification strategies

The increasing rate of industrialization, anthropogenic, and geological activities have expedited the release of heavy metals (HMs) at higher concentration in environment. HM contamination resulting due to its persistent nature, injudicious use poses a potential threat by causing metal toxicities in humans and animals as well as severe damage to aquatic organisms. Bioremediation is an emerging and reliable solution for mitigation of these contaminants using rhizospheric microorganisms in an environmentally safe manner. The strategies are based on exploiting microbial metabolism and various approaches developed by plant growth promoting bacteria (PGPB) to minimize the toxicity concentration of HM at optimum levels for the environmental clean-up. Rhizospheric bacteria are employed for significant growth of plants in soil contaminated with HM. Exploitation of bacteria possessing plant-beneficial traits as well as metal detoxifying property is an economical and promising approach for bioremediation of HM. Microbial cells exhibit different mechanisms of HM resistance such as active transport, extra cellular barrier, extracellular and intracellular sequestration, and reduction of HM. Tolerance of HM in microorganisms may be chromosomal or plasmid originated. Proteins such as MerT and MerA of mer operon and czcCBA, ArsR, ArsA, ArsD, ArsB, and ArsC genes are responsible for metal detoxification in bacterial cell. This review gives insights about the potential of rhizospheric bacteria in HM removal from various polluted areas. In addition, it also gives deep insights about different mechanism of action expressed by microorganisms for HM detoxification. The dual-purpose use of biological agent as plant growth enhancement and remediation of HM contaminated site is the most significant future prospect of this article.

Sequestration and oxidation of heavy metals mediated by Mn(II) oxidizing microorganisms in the aquatic environment

Microorganisms can oxidize Mn(II) to biogenic Mn oxides (BioMnOx), through enzyme-mediated processes and non-enzyme-mediated processes, which are generally considered as the source and sink of heavy metals due to highly reactive to sequestrate and oxidize heavy metals. Hence, the summary of interactions between Mn(II) oxidizing microorganisms (MnOM) and heavy metals is benefit for further work on microbial-mediated self-purification of water bodies. This review comprehensively summarizes the interactions between MnOM and heavy metals. The processes of BioMnOx production by MnOM has been firstly discussed. Moreover, the interactions between BioMnOx and various heavy metals are critically discussed. On the one hand, modes for heavy metals adsorbed on BioMnOx are summarized, such as electrostatic attraction, oxidative precipitation, ion exchange, surface complexation, and autocatalytic oxidation. On the other hand, adsorption and oxidation of representative heavy metals based on BioMnOx/Mn(II) are also discussed. Thirdly, the interactions between MnOM and heavy metals are also focused on. Finally, several perspectives which will contribute to future research are proposed. This review provides insight into the sequestration and oxidation of heavy metals mediated by Mn(II) oxidizing microorganisms. It might be helpful to understand the geochemical fate of heavy metals in the aquatic environment and the process of microbial-mediated water self-purification.

Sequestration of crystal violet dye from wastewater using low-cost coconut husk as a potential adsorbent

The current study explores the effectiveness of coconut husk for crystal violet dye sequestration employing a batch experimental setup. Characterization of adsorbent was carried out via FTIR, and SEM techniques and results confirmed the involvement of -OMe, -COC- and hydroxyl functional groups in dye uptake, and the rough, porous nature of adsorbent and after adsorption dye molecules colonized these holes resulting in dye exclusion. Effects of various adsorption parameters such as pH, adsorbent dose, contact time, initial dye concentration, and temperature of solution were studied. Crystal violet adsorption on coconut husk was highly pH-dependent, with maximum removal occurring at basic pH. Maximum removal of dye, i.e., 81%, takes place at optimized conditions. Kinetic data was analyzed by pseudo-first, pseudo-second order and an intra-particle diffusion model. Results showed that the pseudo-second order kinetic model best described adsorption of crystal violet onto coconut husk. Langmuir, Freundlich, and D-R adsorption isotherms were also used to test their appropriateness to experimental data and the Freundlich isotherm fits best to data. Thermodynamic parameters showed that the current process was spontaneous, endothermic in nature with continuous decrease in entropy. Established practice is 79% applicable to tap water and in acidic medium nearly 80% of adsorbent was recovered, confirming the effectiveness and appropriateness of coconut husk for crystal violet dye exclusion from wastewater.

Biomass and salt-dependent effects of Bacillus spores on radionuclide migration from the Waste Isolation Pilot Plant

Spores of a Bacillus sp., isolated from radioactive waste, were tested for their ability to influence the fate and transport of neodymium (Nd³⁺) under high salt conditions expected at the Waste Isolation Pilot Plant (WIPP) nuclear waste repository. Spores were suspended in neodymium-spiked saline solutions up to 4 M NaCl, and concentrations of Nd and the complexing agent dipicolinic acid (DPA), a component of spores, were monitored along with optical densities and spore numbers. Results support neodymium bioassociation that is dependent upon biomass, with more apparent adsorption occurring at higher spore concentrations. However, probable spore lysis in 2 and 4 M NaCl solutions and possible germination at 0.15 M NaCl appear to drive the release of DPA and subsequent return of Nd to solution. The implications of this work for the WIPP will depend on actual biomass levels and the ionic strength of the repository brines.

Unraveling the Underlying Heavy Metal Detoxification Mechanisms of Bacillus Species

The rise of anthropogenic activities has resulted in the increasing release of various contaminants into the environment, jeopardizing fragile ecosystems in the process. Heavy metals are one of the major pollutants that contribute to the escalating problem of environmental pollution, being primarily introduced in sensitive ecological habitats through industrial effluents, wastewater, as well as sewage of various industries. Where heavy metals like zinc, copper, manganese, and nickel serve key roles in regulating different biological processes in living systems, many heavy metals can be toxic even at low concentrations, such as mercury, arsenic, cadmium, chromium, and lead, and can accumulate in intricate food chains resulting in health concerns. Over the years, many physical and chemical methods of heavy metal removal have essentially been investigated, but their disadvantages like the generation of chemical waste, complex downstream processing, and the uneconomical cost of both methods, have rendered them inefficient,. Since then, microbial bioremediation, particularly the use of bacteria, has gained attention due to the feasibility and efficiency of using them in removing heavy metals from contaminated environments. Bacteria have several methods of processing heavy metals through general resistance mechanisms, biosorption, adsorption, and efflux mechanisms. Bacillus spp. are model Gram-positive bacteria that have been studied extensively for their biosorption abilities and molecular mechanisms that enable their survival as well as their ability to remove and detoxify heavy metals. This review aims to highlight the molecular methods of Bacillus spp. in removing various heavy metals ions from contaminated environments.

Metallo-inhibition of Mnx, a bacterial manganese multicopper oxidase complex

The manganese oxidase complex, Mnx, from Bacillus sp. PL-12 contains a multicopper oxidase (MCO) and oxidizes dissolved Mn(II) to form insoluble manganese oxide (MnO₂) mineral. Previous kinetic and spectroscopic analyses have shown that the enzyme's mechanism proceeds through an activation step that facilitates formation of a series of binuclear Mn complexes in the oxidation states II, III, and IV on the path to MnO₂ formation. We now demonstrate that the enzyme is inhibited by first-row transition metals in the order of the Irving-Williams series. Zn(II) strongly (K_i ~ 1.5 μM) inhibits both activation and turnover steps, as well as the rate of Mn(II) binding. The combined Zn(II) and Mn(II) concentration dependence establishes that the inhibition is non-competitive. This result is supported by electron paramagnetic resonance (EPR) spectroscopy, which reveals unaltered Mnx-bound Mn(II) EPR signals, both mono- and binuclear, in the presence of Zn(II). We infer that inhibitory metals bind at a site separate from the substrate sites and block the conformation change required to activate the enzyme, a case of allosteric inhibition. The likely biological role of this inhibitory site is discussed in the context of Bacillus spore physiology. While Cu(II) inhibits Mnx strongly, in accord with the Irving-Williams series, it increases Mnx activation at low concentrations, suggesting that weakly bound Cu, in addition to the four canonical MCO-Cu, may support enzyme activity, perhaps as an electron transfer agent.

Colony-Forming Unit Spreadplate Assay versus Liquid Culture Enrichment-Polymerase Chain Reaction Assay for the Detection of Bacillus Endospores in Soils

A liquid culture enrichment-polymerase chain reaction (E-PCR) assay was investigated as a potential tool to overcome inhibition by chemical component, debris, and background biological impurities in soil that were affecting detection assay performance for soil samples containing Bacillus atrophaeus subsp. globigii (a surrogate for B. anthracis). To evaluate this assay, 9 g of matched sets of three different soil types (loamy sand [sand], sandy loam [loam] and clay) was spiked with 0, ~4.5, 45, 225, 675 and 1350 endospores. One matched set was evaluated using a previously published endospore concentration and colony-forming unit spreadplate (CFU-S) assay and the other matched set was evaluated using an E-PCR assay to investigate differences in limits of detection between the two assays. Data illustrated that detection using the CFU-S assay at the 45-endospore spike level started to become sporadic whereas the E-PCR assay produced repeatable detection at the ~4.5-endospore spike concentration. The E-PCR produced an ~2-log increase in sensitivity and required slightly less time to complete than the CFU-S assay. This study also investigated differences in recovery among pure and blended sand and clay soils and found potential activation of B. anthracis in predominately clay-based soils.

Review of Heavy Metal Adsorption Processes by Several Organic Matters from Wastewaters

Heavy metal contamination of natural rivers and wastewaters is a problem for both the environment and human society. The accumulation and adsorption of heavy metals could happen with several organic and inorganic matters, but the most used adsorbents are (biological and chemical) organic compounds. This review article presents the basics of heavy metal adsorption on several organic surfaces. There are many organic matters, which seem to be useful as agents for heavy metal adsorption. All of the cited authors and articles present the adsorption kinetics by the most used isotherm models (such as Langmuir and Freundlich isotherms). By comparing several research results presented by a pre-selected assortment of papers, we would like to give an overview of the microbiological, organic chemical, and other surface adsorption possibilities. We draw conclusions for two new adsorption fields (adsorption with biosorbent and artificial materials). We present an optional possibility to study adsorption kinetics, efficiency and regeneration methods to successfully conclude the heavy metal treatment process, and we make some recommendations about the efficient water usage calculations using the water allowance coefficient (WAC) indicator.

Effects and Mechanisms of Microbial Remediation of Heavy Metals in Soil: A Critical Review

The use of microbes to change the concentration of heavy metals in soil and improve the ability of plants to deal with elevated metals concentrations has significant economic and ecological benefits. This paper reviews the origins and toxic effects of heavy metal pollution in soil, and describes the heavy metal accumulation mechanisms of microbes, and compares their different bioconcentration abilities. Biosorption, which depends on the special structure of the cell wall, is found to be the primary mechanism. Furthermore, Escherichia coli are found to adsorb more heavy metals than other species. Factors influencing microbial treatment of wastewater and soil containing heavy metals include temperature, pH, and different substrates. Finally, problems in the application of microbial treatment of heavy metal contamination are considered, and possible directions for future research are discussed.

The presence of algae mitigates the toxicity of copper-based algaecides to a nontarget organism

Copper-based algaecides are routinely applied to target noxious algal blooms in freshwaters. Standard toxicity testing data with copper suggest that typical concentrations used to control algae can cause deleterious acute impacts to nontarget organisms. These "clean" water experiments lack algae, which are specifically targeted in field applications of algaecides and contain competing ligands. The present research measured the influence of algae on algaecide exposure and subsequent response of the nontarget species Daphnia magna to copper sulfate and an ethanolamine-chelated copper algaecide (Captain®). Significant shifts (p < 0.05) in D. magna 48-h median lethal concentration (LC50) values were found when algae were present in exposures along with a copper salt or a chelated copper formulation. Copper sulfate 48-h LC50 values shifted from 75.3 to 317.8 and 517.8 μg Cu/L, whereas Captain increased from 353.8 to 414.2 and 588.5 μg Cu/L in no algae, 5 × 10⁵ , and 5 × 10⁶ cells/mL algae treatments, respectively. Larger shifts were measured with copper sulfate exposures, although Captain was less toxic to D. magna in all corresponding treatments. Captain was more effective at controlling Scenedesmus dimorphus at most concentrations, and control was inversely proportional to toxicity to D. magna. Overall, incorporating target competing ligands (i.e., algae) into standard toxicity testing is important for accurate risk assessment, and copper formulation can significantly alter algaecidal efficacy and risks to nontarget organisms. Environ Toxicol Chem 2018;37:2132-2142. © 2018 SETAC.

Effects of synbiotic supplementation on growth performance, carcass characteristics, meat quality and muscular antioxidant capacity and mineral contents in broilers

BACKGROUND

The present study aimed to investigate the effects of dietary synbiotic supplementation on growth performance, carcass composition, meat quality and muscular antioxidant capacity, and mineral contents in broilers. Accordingly, 96 day-old male broiler chicks (Arbor Acres Plus; Aviagen, Huntsville, AL, USA) were randomly allocated to two groups, and each group consisted of six replicates with eight chicks each. Birds were fed a corn-soybean meal basal diet supplemented with either 0 or 1.5 g kg^-1 synbiotic, consisting of probiotics (Bacillus subtilis, Bacillus licheniformis and Clostridium butyricum) and prebiotics (yeast cell wall and xylooligosaccharide) from 1 to 42 days of age.

RESULTS

Compared with the control group, supplementation with a synbiotic increased average daily gain (P < 0.05) but reduced feed/gain ratio (P < 0.01) in broilers from 1 to 42 days of age. Similalrly, dietary synbiotic inclusion increased breast yield (P < 0.05) but decreased abdominal fat (P < 0.01) in broilers. The breast muscle pH value at 24 h postmortem in broilers was elevated with the incorporation of synbiotic (P < 0.05). By contrast, synbiotic supplementation lowered the cooking loss during heat treatment in a water bath, malondialdehyde content, and total Cr content in the thigh muscle in broilers (P < 0.05).

CONCLUSION

Dietary synbiotic supplementation into the diet of broilers may be an effective method for improving growth performance and carcass compositions, resulting in the production of meat with a favorable quality and oxidative stability. © 2017 Society of Chemical Industry.

Cd(II) removal on surface-modified activated carbon: equilibrium, kinetics and mechanism

Commercial pulverous activated carbon (AC-0) was modified through two steps: oxidize AC-0 acid firstly, impregnate it with iron using ferric chloride secondly. Orthogonal experiment was conducted then to prepare modified activated carbon with high Cd(II) adsorption capacity (ACNF). Batch adsorption experiments were undertaken to determine the adsorption characteristics of Cd(II) from aqueous solution onto AC-0 and ACNF and the effect of pH, contact time and initial Cd(II) concentration. The results indicate that: the adsorption behavior of Cd(II) on ACNF can be well fitted with Langmuir model, and the maximum adsorption capacity of ACNF was 2.3 times higher than that of AC-0, supporting a monolayer coverage of Cd(II) on the surface. The kinetics of the adsorption process can be described by pseudo-second-order rate equation very well, and the adsorption capacity increased from 0.810 mg/g to 0.960 mg/g after modification. Compared with AC-0, the kinetic parameters of ACNF showed a higher adsorption rate through the aqueous solution to the solid surface and a lower intraparticle diffusion rate. Surface modification resulted in a lower Brunauer-Emmett-Teller (BET) surface area and pore size because of the collapse and blockage of pores, according to the X-ray diffraction (XRD) analysis, while the total number of surface oxygen acid groups increased, and this was supposed to contribute to the enhanced adsorption capacity of modified activated carbon.

Bacterial spores as particulate carriers for gene gun delivery of plasmid DNA

Bacillus subtilis spores represent a suitable platform for the adsorption of proteins, enzymes and viral particles at physiological conditions. In the present work, we demonstrate that purified spores can also adsorb DNA on their surface after treatment with cationic molecules. In addition, we demonstrate that DNA-coated B. subtilis spores can be used as particulate carriers and act as an alternative to gold microparticles for the biolistic (gene gun) administration of plasmid DNA in mice. Gene gun delivery of spores pre-treated with DODAB (dioctadecyldimethylammonium bromide) allowed efficient plasmid DNA absorption and induced protein expression levels similar to those obtained with gold microparticles. More importantly, we demonstrated that a DNA vaccine adsorbed on spores can be loaded into biolistic cartridges and efficiently delivered into mice, which induced specific cellular and antibody responses. Altogether, these data indicate that B. subtilis spores represent a simple and low cost alternative for the in vivo delivery of DNA vaccines by the gene gun technology.

The Role of Bacterial Spores in Metal Cycling and Their Potential Application in Metal Contaminant Bioremediation

Bacteria are one of the premier biological forces that, in combination with chemical and physical forces, drive metal availability in the environment. Bacterial spores, when found in the environment, are often considered to be dormant and metabolically inactive, in a resting state waiting for favorable conditions for them to germinate. However, this is a highly oversimplified view of spores in the environment. The surface of bacterial spores represents a potential site for chemical reactions to occur. Additionally, proteins in the outer layers (spore coats or exosporium) may also have more specific catalytic activity. As a consequence, bacterial spores can play a role in geochemical processes and may indeed find uses in various biotechnological applications. The aim of this review is to introduce the role of bacteria and bacterial spores in biogeochemical cycles and their potential use as toxic metal bioremediation agents.

Water and Small-Molecule Permeation of Dormant Bacillus subtilis Spores

We use a suspended microchannel resonator to characterize the water and small-molecule permeability of Bacillus subtilis spores based on spores' buoyant mass in different solutions. Consistent with previous results, we found that the spore coat is not a significant barrier to small molecules, and the extent to which small molecules may enter the spore is size dependent. We have developed a method to directly observe the exchange kinetics of intraspore water with deuterium oxide, and we applied this method to wild-type spores and a panel of congenic mutants with deficiencies in the assembly or structure of the coat. Compared to wild-type spores, which exchange in approximately 1 s, several coat mutant spores were found to have relatively high water permeability with exchange times below the ∼200-ms temporal resolution of our assay. In addition, we found that the water permeability of the spore correlates with the ability of spores to germinate with dodecylamine and with the ability of TbCl3 to inhibit germination with l-valine. These results suggest that the structure of the coat may be necessary for maintaining low water permeability.

IMPORTANCE

Spores of Bacillus species cause food spoilage and disease and are extremely resistant to standard decontamination methods. This hardiness is partly due to spores' extremely low permeability to chemicals, including water. We present a method to directly monitor the uptake of molecules into B. subtilis spores by weighing spores in fluid. The results demonstrate the exchange of core water with subsecond resolution and show a correlation between water permeability and the rate at which small molecules can initiate or inhibit germination in coat-damaged spores. The ability to directly measure the uptake of molecules in the context of spores with known structural or genetic deficiencies is expected to provide insight into the determinants of spores' extreme resistance.

Fast and effective inactivation of Bacillus atrophaeus endospores using light-activated derivatives of vitamin B2

Highly resistant endospores may cause severe problems in medicine as well as in the food and packaging industries. We found that bacterial endospores can be inactivated quickly with reactive oxygen species (ROS) that were generated by a new generation of flavin photosensitizers. Flavins like the natural compound vitamin B2 are already known to produce ROS but they show a poor antimicrobial photodynamic killing efficacy due to the lack of positive charges. Therefore we synthesized new flavin photosensitizers that have one (FLASH-01a) or eight (FLASH-07a) positive charges and can hence attach to the negatively charged surface of endospores. In this study we used standardized Bacillus atrophaeus endospores (ATCC 9372) as a biological surrogate model for a proof-of-concept study of photodynamic inactivation experiments using FLASH-01a and FLASH-07a. After incubation of spores with different flavin concentrations, the flavin derivatives were excited with blue light at a light dose of 70 J cm(-2). The inactivation of spores was investigated either in suspension or after attachment to polyethylene terephthalate (PET) surfaces. Incubation of spores suspended in Millipore water with 4 mM FLASH-01a for 10 seconds and irradiation with blue light for 10 seconds caused a biologically relevant decrease of spore survival of 3.5 log10 orders. Using FLASH-07a under the same conditions we achieved a decrease of 4.4 log10 orders. Immobilized spores on PET surfaces were efficiently killed with 7.0 log10 orders using 8 mM FLASH-07a. The total treatment time (incubation + irradiation) was as short as 20 seconds. The results of this study show evidence that endospores can be fastly and effectively inactivated with new generations of flavin photosensitizers that may be useful for industrial or medical applications in the future.

Systematic investigation of germination responses of Bacillus subtilis spores in different high-salinity environments

High-salinity environments play an increasingly important role in ecology regarding soil salinization due to human-induced processes, but also need to be considered in terms of natural soil desiccation and extreme habitats. It has been shown previously that spore germination of the ubiquitous soil bacterium Bacillus subtilis is detrimentally affected by the presence of high NaCl concentrations, but the underlying mechanisms and effects of other salts remained obscure. To address these two points, we performed a systematic analysis with 32 different salts using spectrophotometric and microscopic methods. It could be shown that inhibitory strength varies considerably among different salts. Although osmotic effects seem to play an important role, ionic composition and concentration (especially of the anion) as well as chemical properties seem to be decisive for the extent of germination inhibition. At the current state of knowledge, fluxes of ions, Ca(2+)-DPA and water are likely affected by all salts, whereas the exact inhibition mechanism of each salt might further depend on the respective properties of the involved ions. Hence, the observed inhibition likely is a result of several phenomena interacting with each other. Altogether this study highlights the complex impact of ionic environments on the life cycle of spore formers.

Effects of nano-ZnO on the agronomically relevant Rhizobium-legume symbiosis

The impact of nano-ZnO (nZnO) on Rhizobium-legume symbiosis was studied with garden pea and its compatible bacterial partner Rhizobium leguminosarum bv. viciae 3841. Exposure of peas to nZnO had no impact on germination, but significantly affected root length. Chronic exposure of plant to nZnO impacted its development by decreasing the number of the first- and the second-order lateral roots, stem length, leaf surface area, and transpiration. The effect of nZnO dissolution on phytotoxicity was also examined. Results showed that Zn(2+) had negative impact on plant development. Exposure of R. leguminosarum bv. viciae 3841 to nZnO brought about morphological changes by rendering the microbial cells toward round shape and damaging the bacterial surface. Furthermore, the presence of nZnO in the rhizosphere affected root nodulation, delayed the onset of nitrogen fixation, and caused early senescence of nodules. Attachment of nanoparticles on the root surface and dissolution of Zn(2+) are important factors affecting the phytotocity of nZnO. Hence, the presence of nZnO in the environment is potentially hazardous to the Rhizobium-legume symbiosis system.

Silica coating and photocatalytic activities of ZnO nanoparticles: effect of operational parameters and kinetic study

Silica-coating ZnO nanoparticles were prepared using the hydrothermal method. The prepared nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive X-ray Spectroscopy (EDX). It was found that ultrafine core/shell structured silica-coating ZnO nanoparticles were successfully obtained. TEM analysis revealed a continuous and uniform silica coating layer of about 8nm in thickness on the surface of ZnO nanoparticles. The photocatalytic performance of silica-coating ZnO core/shell nanoparticles in methylene blue aqueous solution was investigated. The effects of some operational parameters such as pH value, nanocatalyst loading and initial MB concentration on the degradation efficiency were discussed. Kinetic parameters were experimentally determined and a pseudo-first-order kinetic was observed. Thus, the main advantage of the coating is the stability of the photocatalysts and the better performance in acidic or alkaline solutions. Compared to ZnO the maximum apparent rate constant is obtained at pH 8.5 (pH 11.5 in case of bare ZnO). Moreover, the Langmuir adsorption model was applied to describe the equilibrium isotherm at different MB concentration. The applicability of the Langmuir isotherm suggests monolayer coverage of the MB onto surface of silica-coating ZnO nanoparticles. The kinetics of the adsorption with respect to the initial dye concentration, were also investigated. The pseudo-first-order and second-order kinetic models were used and the rate constants were evaluated. The kinetic studies revealed that the pseudo-second-order kinetic model better represented the adsorption kinetics, suggesting that the adsorption process may be chemisorption.

Dye and its removal from aqueous solution by adsorption: a review

In this review article the authors presented up to-date development on the application of adsorption in the removal of dyes from aqueous solution. This review article provides extensive literature information about dyes, its classification and toxicity, various treatment methods, and dye adsorption characteristics by various adsorbents. One of the objectives of this review article is to organise the scattered available information on various aspects on a wide range of potentially effective adsorbents in the removal of dyes. Therefore, an extensive list of various adsorbents such as natural materials, waste materials from industry, agricultural by-products, and biomass based activated carbon in the removal of various dyes has been compiled here. Dye bearing waste treatment by adsorption using low cost alternative adsorbent is a demanding area as it has double benefits i.e. water treatment and waste management. Further, activated carbon from biomass has the advantage of offering an effected low cost replacement for non-renewable coal based granular activated carbon provided that they have similar or better adsorption on efficiency. The effectiveness of various adsorbents under different physico-chemical process parameters and their comparative adsorption capacity towards dye adsorption has also been presented. This review paper also includes the affective adsorption factors of dye such as solution pH, initial dye concentration, adsorbent dosage, and temperature. The applicability of various adsorption kinetic models and isotherm models for dye removal by wide range of adsorbents is also reported here. Conclusions have been drawn from the literature reviewed and few suggestions for future research are proposed.

Adhesion of bacterial pathogens to soil colloidal particles: influences of cell type, natural organic matter, and solution chemistry

Bacterial adhesion to granular soil particles is well studied; however, pathogen interactions with naturally occurring colloidal particles (<2 μm) in soil has not been investigated. This study was developed to identify the interaction mechanisms between model bacterial pathogens and soil colloids as a function of cell type, natural organic matter (NOM), and solution chemistry. Specifically, batch adhesion experiments were conducted using NOM-present, NOM-stripped soil colloids, Streptococcus suis SC05 and Escherichia coli WH09 over a wide range of solution pH (4.0-9.0) and ionic strength (IS, 1-100 mM KCl). Cell characterization techniques, Freundlich isotherm, and Derjaguin-Landau-Verwey-Overbeek (DLVO) theory (sphere-sphere model) were utilized to quantitatively determine the interactions between cells and colloids. The adhesion coefficients (Kf) of S. suis SC05 to NOM-present and NOM-stripped soil colloids were significantly higher than E. coli WH09, respectively. Similarly, Kf values of S. suis SC05 and E. coli WH09 adhesion to NOM-stripped soil colloids were greater than those colloids with NOM-present, respectively, suggesting NOM inhibits bacterial adhesion. Cell adhesion to soil colloids declined with increasing pH and enhanced with rising IS (1-50 mM). Interaction energy calculations indicate these adhesion trends can be explained by DLVO-type forces, with S. suis SC05 and E. coli WH09 being weakly adhered in shallow secondary energy minima via polymer bridging and charge heterogeneity. S. suis SC05 adhesion decreased at higher IS 100 mM, which is attributed to the change of hydrophobic effect and steric repulsion resulted from the greater presence of extracellular polymeric substances (EPS) on S. suis SC05 surface as compared to E. coli WH09. Hence, pathogen adhesion to the colloidal material is determined by a combination of DLVO, charge heterogeneity, hydrophobic and polymer interactions as a function of solution chemistry.

Effects of nano-TiO₂ on the agronomically-relevant Rhizobium-legume symbiosis

The impact of nano-TiO₂ on Rhizobium-legume symbiosis was studied using garden peas and the compatible bacterial partner Rhizobium leguminosarum bv. viciae 3841. Exposure to nano-TiO₂ did not affect the germination of peas grown aseptically, nor did it impact the gross root structure. However, nano-TiO₂ exposure did impact plant development by decreasing the number of secondary lateral roots. Cultured R. leguminosarum bv. viciae 3841 was also impacted by exposure to nano-TiO₂, resulting in morphological changes to the bacterial cells. Moreover, the interaction between these two organisms was disrupted by nano-TiO₂ exposure, such that root nodule development and the subsequent onset of nitrogen fixation were delayed. Further, the polysaccharide composition of the walls of infected cells of nodules was altered, suggesting that the exposure induced a systemic response in host plants. Therefore, nano-TiO₂ contamination in the environment is potentially hazardous to the Rhizobium-legume symbiosis system.

The effect of Ca2+ ions and ionic strength on Mn(II) oxidation by spores of the marine Bacillus sp. SG-1

Manganese(IV) oxides, believed to form primarily through microbial activities, are extremely important mineral phases in marine environments where they scavenge a variety of trace elements and thereby control their distributions. The presence of various ions common in seawater are known to influence Mn oxide mineralogy yet little is known about the effect of these ions on the kinetics of bacterial Mn(II) oxidation and Mn oxide formation. We examined factors affecting bacterial Mn(II) oxidation by spores of the marine Bacillus sp. strain SG-1 in natural and artificial seawater of varying ionic conditions. Ca²⁺ concentration dramatically affected Mn(II) oxidation, while Mg²⁺, Sr²⁺, K⁺, Na⁺ and NO₃^- ions had no effect. The rate of Mn(II) oxidation at 10mM Ca²⁺ (seawater composition) was four or five times that without Ca²⁺. The relationship between Ca²⁺ content and oxidation rate demonstrates that the equilibrium constant is small (on the order of 0.1) and the binding coefficient is 0.5. The pH optimum for Mn(II) oxidation changed depending on the amount of Ca²⁺ present, suggesting that Ca²⁺ exerts a direct effect on the enzyme perhaps as a stabilizing bridge between polypeptide components. We also examined the effect of varying concentrations of NaCl or KNO₃ (0 mM - 2000 mM) on the kinetics of Mn(II) oxidation in solutions containing 10 mM Ca²⁺. Mn(II) oxidation was unaffected by changes in ionic strength (I) below 0.2, but it was inhibited by increasing salt concentrations above this value. Our results suggest that the critical coagulation concentration is around 200 mM of salt (I = ca. 0.2), and that the ionic strength of seawater (I > 0.2) accelerates the precipitation of Mn oxides around the spores. Under these conditions, the aggregation of Mn oxides reduces the supply of dissolved O₂ and/or Mn²⁺ and inhibits the Mn(II) -> Mn(III) step controlling the enzymatic oxidation of Mn(II). Our results suggest that the hardness and ionic strength of the aquatic environment at circumneutral pH strongly influences the rate of biologically mediated Mn(II) oxidation.

Biosorption of Cd(II)/Pb(II) from aqueous solution by biosurfactant-producing bacteria: isotherm kinetic characteristic and mechanism studies

The potentiality of biosurfactant-producing bacterium Pseudomonas sp. LKS06 to remove Cd(II) and Pb(II) ions from aqueous solution was investigated in this study. The maximum biosorption capacity of Pseudomonas sp. LKS06 biomass for Cd(II) and Pb(II) was found to be 27.5 and 77.8 mg g(-1), respectively, at the optimum pH of 6.0. The process can be better explained by Langmuir-Freundlich dual isotherm model (R(2)>0.981) while the kinetic data was best described by using the pseudo-second-order kinetic model (R(2)>0.999). Both metal ions were successfully recovered from the bacterial biomass using 0.1M HNO3 with 90% recovery and the biomass shows high stability in the experiment of regeneration. Scanning electron microscopic analysis demonstrates a conspicuous surface morphology change of the Cd(II)/Pb(II)-adsorbed biomass. The results of zeta potential measurement and Fourier transform infrared spectroscopy suggested the involvement of amine, carboxyl, phosphate and hydroxyl groups during the biosorption process. Based on the results, it can be concluded that the biomass of Pseudomonas sp. LKS06 can be evaluated as an alternative biosorbent to remove Cd(II) and Pb(II) ions from industrial wastewater.

Chemical and structural status of copper associated with oxygenic and anoxygenic phototrophs and heterotrophs: possible evolutionary consequences

Copper adsorption on the surface and intracellular uptake inside the cells of four representative taxons of soil and aquatic micro-organisms: aerobic rhizospheric heterotrophs (Pseudomonas aureofaciens), anoxygenic (Rhodovulum steppense) and oxygenic (cyanobacteria Gloeocapsa sp. and freshwater diatoms Navicula minima) phototrophs were studied in a wide range of pH, copper concentration, and time of exposure. Chemical status of adsorbed and assimilated Cu was investigated using in situ X-ray absorption spectroscopy. In case of adsorbed copper, XANES spectra demonstrated significant fractions of Cu(I) likely in the form of tri-coordinate complexes with O/N and/or S ligands. Upon short-term reversible adsorption at all four studied micro-organisms' cell surface, Cu(II) is coordinated by 4.0 ± 0.5 planar oxygens at an average distance of 1.97 ± 0.02 Å, which is tentatively assigned to the carboxylate groups. The atomic environment of copper incorporated into diatoms and cyanobacteria during long-term growth is similar to that of the adsorbed metal with slightly shorter distances to the first O/N neighbor (1.95 Å). In contrast to the common view of Cu status in phototrophic micro-organisms, XAFS failed to detect sulfur in the nearest atomic environment of Cu assimilated by freshwater plankton (cyanobacteria) and periphyton (diatoms). The appearance of S in Cu 1st coordination shell at 2.27-2.32 Å was revealed only after long-term interaction of Cu with anoxygenic phototrophs (and Cu uptake by soil heterotrophs), suggesting Cu scavenging in the form of sulfhydryl, histidine/carboxyl or a mixture of carboxylate and sulfhydryl complexes. These new structural constraints suggest that adsorbed Cu(II) is partially reduced to Cu(I) already at the cell surface, where as intracellular Cu uptake and storage occur in the form of both Cu(I)-S linked proteins and Cu(II) carboxylates. Obtained results allow to better understand how, in the course of biological evolution, micro-organisms elaborated various mechanisms of Cu uptake and storage, from passive adsorption and uptake to active, protein-controlled surface reduction, and intracellular storage.

Optimizing Bacillus subtilis spore isolation and quantifying spore harvest purity

Investigating the biochemistry, resilience and environmental interactions of bacterial endospores often requires a pure endospore biomass free of vegetative cells. Numerous endospore isolation methods, however, neglect to quantify the purity of the final endospore biomass. To ensure low vegetative cell contamination we developed a quality control technique that enables rapid quantification of endospore harvest purity. This method quantifies spore purity using bright-field and fluorescence microscopy imaging in conjunction with automated cell counting software. We applied this method to Bacillus subtilis endospore harvests isolated using a two-phase separation method that utilizes mild chemicals. The average spore purity of twenty-two harvests was 88±11% (error is 1σ) with a median value of 93%. A spearman coefficient of 0.97 correlating automated and manual bacterial counts confirms the accuracy of software generated data.

Spatially resolved characterization of water and ion incorporation in Bacillus spores

We present the first direct visualization and quantification of water and ion uptake into the core of individual dormant Bacillus thuringiensis subsp. israelensis (B. thuringiensis subsp. israelensis) endospores. Isotopic and elemental gradients in the B. thuringiensis subsp. israelensis spores show the permeation and incorporation of deuterium in deuterated water (D(2)O) and solvated ions throughout individual spores, including the spore core. Under hydrated conditions, incorporation into a spore occurs on a time scale of minutes, with subsequent uptake of the permeating species continuing over a period of days. The distribution of available adsorption sites is shown to vary with the permeating species. Adsorption sites for Li(+), Cs(+), and Cl(-) are more abundant within the spore outer structures (exosporium, coat, and cortex) relative to the core, while F(-) adsorption sites are more abundant in the core. The results presented here demonstrate that elemental abundance and distribution in dormant spores are influenced by the ambient environment. As such, this study highlights the importance of understanding how microbial elemental and isotopic signatures can be altered postproduction, including during sample preparation for analysis, and therefore, this study is immediately relevant to the use of elemental and isotopic markers in environmental microbiology and microbial forensics.

Mucosal delivery of antigens using adsorption to bacterial spores

The development of new-generation vaccines has followed a number of strategic avenues including the use of live recombinant bacteria. Of these, the use of genetically engineered bacterial spores has been shown to offer promise as both a mucosal as well as a heat-stable vaccine delivery system. Spores of the genus Bacillus are currently in widespread use as probiotics enabling a case to be made for their safety. In this work we have discovered that the negatively charged and hydrophobic surface layer of spores provides a suitable platform for adsorption of protein antigens. Binding can be promoted under conditions of low pH and requires a potent combination of electrostatic and hydrophobic interactions between spore and immunogen. Using appropriately adsorbed spores we have shown that mice immunised mucosally can be protected against challenge with tetanus toxin, Clostridium perfringens alpha toxin and could survive challenge with anthrax toxin. In some cases protection is actually greater than using a recombinant vaccine. Remarkably, killed or inactivated spores appear equally effective as live spores. The spore appears to present a bound antigen in its native conformation promoting a cellular (T(h)1-biased) response coupled with a strong antibody response. Spores then, should be considered as mucosal adjuvants, most similar to particulate adjuvants, by enhancing responses against soluble antigens. The broad spectrum of immune responses elicited coupled with the attendant benefits of safety suggest that spore adsorption could be appropriate for improving the immunogenicity of some vaccines as well as the delivery of biotherapeutic molecules.

The ecology of Bacillus anthracis

The global distribution of anthrax is largely determined by soils with high calcium levels and a pH above 6.1, which foster spore survival. It is speculated that the spore exosporium probably plays a key part by restricting dispersal and thereby increasing the probability of a grazing animal acquiring a lethal dose. 'Anthrax Seasons' are characterized by hot-dry weather which stresses animals and reduces their innate resistance to infection allowing low doses of spores to be infective. Necrophagic flies act as case-multipliers and haemophagic flies as space-multipliers; the latter are aided by climatic factors which play a key part in whether epidemics occur. Host death is a function of species sensitivity to the toxins. The major function of scavengers is to open the carcass, spill fluids, and thereby aid bacilli dispersal and initiate sporulation. In the context of landscape ecology viable spore distribution is a function of mean annual temperature, annual precipitation, elevation, mean NDVI, annual NDVI amplitude, soil moisture content, and soil pH.

Antimicrobial effects of interferon-inducible CXC chemokines against Bacillus anthracis spores and bacilli

Based on previous studies showing that host chemokines exert antimicrobial activities against bacteria, we sought to determine whether the interferon-inducible Glu-Leu-Arg-negative CXC chemokines CXCL9, CXCL10, and CXCL11 exhibit antimicrobial activities against Bacillus anthracis. In vitro analysis demonstrated that all three CXC chemokines exerted direct antimicrobial effects against B. anthracis spores and bacilli including marked reductions in spore and bacillus viability as determined using a fluorometric assay of bacterial viability and CFU determinations. Electron microscopy studies revealed that CXCL10-treated spores failed to undergo germination as judged by an absence of cytological changes in spore structure that occur during the process of germination. Immunogold labeling of CXCL10-treated spores demonstrated that the chemokine was located internal to the exosporium in association primarily with the spore coat and its interface with the cortex. To begin examining the potential biological relevance of chemokine-mediated antimicrobial activity, we used a murine model of inhalational anthrax. Upon spore challenge, the lungs of C57BL/6 mice (resistant to inhalational B. anthracis infection) had significantly higher levels of CXCL9, CXCL10, and CXCL11 than did the lungs of A/J mice (highly susceptible to infection). Increased CXC chemokine levels were associated with significantly reduced levels of spore germination within the lungs as determined by in vivo imaging. Taken together, our data demonstrate a novel antimicrobial role for host chemokines against B. anthracis that provides unique insight into host defense against inhalational anthrax; these data also support the notion for an innovative approach in treating B. anthracis infection as well as infections caused by other spore-forming organisms.

A study on the adsorption mechanism of mercury on Aspergillus versicolor biomass

The adsorption behavior of mercury on Aspergillus versicolor biomass (AVB) has been investigated in aqueous solution to understand the physicochemical process involved and to explore the potentiality of AVB in pollution control management. This biomass has been successfully used for reducing the mercury concentration level in the effluent of chloralkali and battery industries to a permissible limit. The results establish that 75.6 mg of mercury is adsorbed per gram of biomass. The adsorption process is found to be a function of pH of the solution, with the optimum range being pH 5.0-6.0. The process obeys the Langmuir-Freundlich isotherm model. Scanning electron microscopic analysis demonstrates a conspicuous surface morphology change of the mercury-adsorbed biomass. A nearly uniform distribution of metal ions on the mycelial surface excepting a few aggregation points is revealed by X-ray elemental mapping profiles. The results of zeta potential measurement, Fourier transform infrared (FTIR) spectroscopy, and blocking of the functional groups by chemical modification reflect the binding of mercury on the biomass occurs through electrostatic and complexation reactions. The accumulation of mercury on the cell wall associated with negligible diffusion and or transportation into cytoplasm finds support from the results of adsorption kinetics and transmission electron micrographs. Mercury adsorption on biomass also leads to elongation of cells and cytoplasmic aggregation of spheroplast/protoplasts, indicating that the cell wall acts as a permeation barrier against this toxic metal.

Biosorption of chromium by Termitomyces clypeatus

The manuscript describes removal of chromium from aqueous solution by biomass of different moulds and yeasts. The biomass of Termitomyces clypeatus (TCB) is found to be the most effective of all the fungal species tested. The sorption of hexavalent chromium by live TCB depends on the pH of the solution, the optimum pH value being 3.0. The process follows Langmuir isotherm (regression coefficient 0.998, chi(2)-square 5.03) model with uniform distribution over the surface which gets strong support from the X-ray elemental mapping of chromium adsorbed biomass. The amino, carboxyl, hydroxyl, and phosphate groups of the biomass are involved in chemical interaction with the chromate ion forming a cage like structure depicted by scanning electron microscopic (SEM) and Fourier transform infrared spectroscopic (FTIR) results. Desorption and FTIR studies also exhibited that Cr(6+) is reduced to trivalent chromium on binding to the cell surface. The level of chromium concentration present in the effluent of tannery industries' is reduced to a permissible limit using TCB as adsorbent.

Adsorption of Pseudomonas putida on clay minerals and iron oxide

Adsorption of Pseudomonas putida on minerals including montmorillonite, kaolinite and goethite was studied. The adsorption isotherms of P. putida on the examined minerals conformed to the Langmuir equation. The amount of P. putida adsorbed followed the order: goethite > kaolinite > montmorillonite. A greater extent of P. putida adsorption on minerals was observed in the range of temperature from 15 to 35 degrees C. The adsorption of P. putida on minerals decreased with the increase of pH from 3.0 to 10.0. Magnesium ion was more efficient than sodium ion in promoting P. putida adsorption on minerals. The results suggest that electrostatic interactions play a vital role in P. putida adsorption by soil colloidal factions. The information obtained in this study is of fundamental significance for the understanding of the survival and transport of bacteria in soil systems.

Microbial imprinted polypyrrole/poly(3-methylthiophene) composite films for the detection of Bacillus endospores

The fabrication of Bacillus subtilis endospore imprinted conducting polymer films and subsequent electrochemical detection of bound spores is reported. Imprinted films were prepared by absorbing spores on the surface of glassy carbon electrodes upon which a polypyrrole, followed by a poly(3-methylthiophene), layer were electrochemically deposited. Spore template release was achieved through soaking the modified electrode in DMSO. Binding of endospores to imprinted films could be detected via impedance spectroscopy by monitoring changes in Y'' (susceptance) using Mn(II)Cl2 (0.5M pH 3) as the supporting electrolyte. Here, the change in Y'' could be correlated to spore densities between 10(4) and 10(7)cfu/ml. More sensitive detection of absorbed spores was achieved by following endospore germination via changes in film charge as measured using cyclic voltammetry. Here, imprinted films were submerged in spore suspensions to permit absorption, heat activated at 70 degrees C for 10 min prior to transferring to an electrochemical cell containing germination activators. By using the assay format it was possible to detect 10(2)cfu/ml. The observed changes in film charge could be attributed to the interaction of the supporting conducting polymer with dipicolinic acid (DPA) and other constituents released from the core in the course of germination. In all cases, it was not possible to regenerate the imprinted films without losing electrode response. In summary, the study has provided proof-of-concept for fabricating microbial imprinted films using conducting polymers.

Forensic application of microbiological culture analysis to identify mail intentionally contaminated with Bacillus anthracis spores

The discovery of a letter intentionally filled with dried Bacillus anthracis spores in the office of a United States senator prompted the collection and quarantine of all mail in congressional buildings. This mail was subsequently searched for additional intentionally contaminated letters. A microbiological sampling strategy was used to locate heavy contamination within the 642 separate plastic bags containing the mail. Swab sampling identified 20 bags for manual and visual examination. Air sampling within the 20 bags indicated that one bag was orders of magnitude more contaminated than all the others. This bag contained a letter addressed to Senator Patrick Leahy that had been loaded with dried B. anthracis spores. Microbiological sampling of compartmentalized batches of mail proved to be efficient and relatively safe. Efficiency was increased by inoculating culture media in the hot zone rather than transferring swab samples to a laboratory for inoculation. All mail sampling was complete within 4 days with minimal contamination of the sampling environment or personnel. However, physically handling the intentionally contaminated letter proved to be exceptionally hazardous, as did sorting of cross-contaminated mail, which resulted in generation of hazardous aerosol and extensive contamination of protective clothing. Nearly 8 x 10(6) CFU was removed from the most highly cross-contaminated piece of mail found. Tracking data indicated that this and other heavily contaminated envelopes had been processed through the same mail sorting equipment as, and within 1 s of, two intentionally contaminated letters.

A combined bioprocess for integrated removal of copper and organic pollutant from copper-containing municipal wastewater

Heavy metal-containing wastewater is difficult to treat by most of the bioprocess due to its toxicity to microorganism in activated sludge. In this study, a combined bioprocess consisting of biosorption section that contained magnetite immobilized Pseudomonas putida 5-x cell as biosorbent followed by sequence batch reactor (SBR) was developed to treat Cu(2+)-containing municipal wastewater. The production techniques of Pseudomonas putida 5-x cell as biosorbent, such as optimal cell harvest period and cell pretreatment techniques were studied. Experimental results showed, considering both cell biomass and cell adsorption capacity to Cu(2+), 36 h is the optimal harvest period in the course of culturing Pseudomonas putida 5-x cells as biosorbent, and 0.1-0.3 mol L(-1) HCl is an optimal cell pretreating eluant to improve Cu(2+) adsorption capacity. The performances of the combined bioprocess for treating Cu(2+) containing wastewater were assessed. Experimental results showed that after treatment by biosorption, the Cu(2+) level in wastewater was reduced to level that did not inhibit COD removal efficiency of subsequent SBR activated sludge process, although it still affected the COD adsorption capacity of activated sludge. In terms of COD removal, the biosorption section was efficient for reducing Cu(2+) concentration to provide biodegradable wastewater for subsequent SBR activated sludge process.

Biosorption of copper (II) from chemical mechanical planarization wastewaters

Copper Chemical Mechanical Planarization (Cu-CMP) is a critical step in integrated circuit (IC) device manufacturing. CMP and post-CMP cleaning processes are projected to account for 30-40% of the water consumed by IC manufacturers in 2003. CMP wastewater is expected to contain increasing amounts of copper as the industry switches from Al-CMP to Cu-CMP causing some IC manufacturers to run the risk of violating discharge regulations. There are a variety of treatment schemes currently available for the removal of heavy metals from CMP wastewater, however, many introduce additional chemicals to the wastewater, have large space requirements, or are expensive. This work explores the use of microorganisms for waste treatment. A Staphylococcus sp. of bacteria was isolated and studied to determine the feasibility for use in removing copper from Cu-CMP wastewater. A model Cu-CMP wastewater was developed and tested, as well as actual Cu-CMP wastes. Continuous-flow packed column experiments were performed to obtain adsorption data and show copper recovery from the waste. A predictive, empirical model was used to accurately describe Cu removal. Additionally, the immobilized cells were regenerated, allowing for the concentration and potential recovery of copper from the wastewater.

Ni2+ removal and recovery from electroplating effluent by Pseudomonas putida 5-x cell biomass

Ni2+ and Cu2+ are the major heavy metal ions in electroplating wastewater of Hong Kong. In the present study, Pseudomonas putida 5-x cell biomass was used to remove Ni2+ from electroplating effluent. Ni2+ adsorption capacity of P. putida 5-x cell biomass cultured in sulphate-limiting medium was found to be minimum in early logarithmic growth phase, and maximum of 28.1 mg g(-1) in late stationary growth phase. Pretreated cells by 0.1 mol L(-1) HCl could greatly enhance the Ni2+ adsorption capacity of cell biomass from 28.1 to 36.7 mg g(-1) and had no significant effect on biomass loss. The adsorption process of P. putida 5-x fresh cells and pretreated cell all could be expressed with Freundlich isotherm. TEM analyses indicated that acidic pretreatment degraded the superficial layer-capsule outside of the fresh cell to improve the adsorption capacity of cell to Ni2+. The Ni2+ bound by P. putida 5-x cell biomass could be efficiently recovered using 0.1 mol L(-1) HCl, and the cell biomass could be reused at least five cycles for Ni2+ removal and recovery with 93% above removal efficiency and 98% above recovery rate. Owing to the Cu2+ presented in electroplating wastewater inhibiting Ni2+ adsorption process by P. putida 5-x cell biomass, two-stage biosorption processes should be designed to remove and recover Cu2+ and Ni2+ sequentially from electroplating effluent.

Production of biogenic Mn oxides by leptothrix discophora SS-1 in a chemically defined growth medium and evaluation of their Pb adsorption characteristics

Biogenic Mn oxides were produced by the bacterium Leptothrix discophora SS-1 (= ATCC 3182) in a chemically defined mineral salts medium, and the Pb binding and specific surface area of these oxides were characterized. Growth of SS-1 in the defined medium with pyruvate as a carbon and energy source required the addition of vitamin B12. Complete oxidation of Mn(II) within 60 h required the addition of >/=0.1 &mgr;M FeSO4. Pb adsorption isotherms were determined for the biogenic Mn oxides (and associated cells with their extracellular polymer) and compared to the Pb adsorption isotherms of cells and exopolymer alone, as well as to abiotic Mn oxides. The Pb adsorption to cells and exopolymer with biogenic Mn oxides (0.8 mmol of Mn per g) at pH 6.0 and 25 degreesC was 2 orders of magnitude greater than the Pb adsorption to cells and exopolymer alone (on a dry weight basis). The Pb adsorption to the biogenic Mn oxide was two to five times greater than the Pb adsorption to a chemically precipitated abiotic Mn oxide and several orders of magnitude greater than the Pb adsorption to two commercially available crystalline MnO2 minerals. The N2 Brunauer-Emmet-Teller specific surface areas of the biogenic Mn oxide and fresh Mn oxide precipitate (224 and 58 m2/g, respectively) were significantly greater than those of the commercial Mn oxide minerals (0.048 and 4. 7 m2/g). The Pb adsorption capacity of the biogenic Mn oxide also exceeded that of a chemically precipitated colloidal hydrous Fe oxide under similar solution conditions. These results show that amorphous biogenic Mn oxides similar to those produced by SS-1 may play a significant role in the control of trace metal phase distribution in aquatic systems.