Precise tuning of the glyoxylate cycle in Escherichia coli for efficient tyrosine production from acetate

Stepwise Flux Optimization for Enhanced GABA Production from Acetate in Escherichia coli

Strategic allocation of metabolic flux is essential for achieving a higher production performance in genetically engineered organisms. Flux optimization between cell growth and chemical production has led to the establishment of cost-effective chemical production methods in microbial cell factories. This effect is amplified when utilizing a low-cost carbon source. γ-Aminobutyric acid (GABA), crucial in pharmaceuticals and biodegradable polymers, can be efficiently produced from acetate, a cost-effective substrate. However, a balanced distribution of acetate-derived flux is essential for optimizing the production without hindering growth. In this study, we demonstrated GABA production from acetate using Escherichia coli by focusing on optimizing the metabolic flux at isocitrate and α-ketoglutarate nodes. Through a series of flux optimizations, the final strain produced 2.54 g/L GABA from 5.91 g/L acetate in 24 h (0.43 g/g yield). These findings suggest that delicate flux balancing with the application of a cheap substrate can contribute to cost-effective production of GABA.

Perspectives for Using CO2 as a Feedstock for Biomanufacturing of Fuels and Chemicals

Microbial cell factories offer an eco-friendly alternative for transforming raw materials into commercially valuable products because of their reduced carbon impact compared to conventional industrial procedures. These systems often depend on lignocellulosic feedstocks, mainly pentose and hexose sugars. One major hurdle when utilizing these sugars, especially glucose, is balancing carbon allocation to satisfy energy, cofactor, and other essential component needs for cellular proliferation while maintaining a robust yield. Nearly half or more of this carbon is inevitably lost as CO2 during the biosynthesis of regular metabolic necessities. This loss lowers the production yield and compromises the benefit of reducing greenhouse gas emissions-a fundamental advantage of biomanufacturing. This review paper posits the perspectives of using CO2 from the atmosphere, industrial wastes, or the exhausted gases generated in microbial fermentation as a feedstock for biomanufacturing. Achieving the carbon-neutral or -negative goals is addressed under two main strategies. The one-step strategy uses novel metabolic pathway design and engineering approaches to directly fix the CO2 toward the synthesis of the desired products. Due to the limitation of the yield and efficiency in one-step fixation, the two-step strategy aims to integrate firstly the electrochemical conversion of the exhausted CO2 into C1/C2 products such as formate, methanol, acetate, and ethanol, and a second fermentation process to utilize the CO2-derived C1/C2 chemicals or co-utilize C5/C6 sugars and C1/C2 chemicals for product formation. The potential and challenges of using CO2 as a feedstock for future biomanufacturing of fuels and chemicals are also discussed.

Engineering the glyoxylate cycle for chemical bioproduction

With growing concerns about environmental issues and sustainable economy, bioproduction of chemicals utilizing microbial cell factories provides an eco-friendly alternative to current petro-based processes. Creating high-performance strains (with high titer, yield, and productivity) through metabolic engineering strategies is critical for cost-competitive production. Commonly, it is inevitable to fine-tuning or rewire the endogenous or heterologous pathways in such processes. As an important pathway involved in the synthesis of many kinds of chemicals, the potential of the glyoxylate cycle in metabolic engineering has been studied extensively these years. Here, we review the metabolic regulation of the glyoxylate cycle and summarize recent achievements in microbial production of chemicals through tuning of the glyoxylate cycle, with a focus on studies implemented in model microorganisms. Also, future prospects for bioproduction of glyoxylate cycle-related chemicals are discussed.

Circuit-guided population acclimation of a synthetic microbial consortium for improved biochemical production

Microbial consortia have been considered potential platforms for bioprocessing applications. However, the complexity in process control owing to the use of multiple strains necessitates the use of an efficient population control strategy. Herein, we report circuit-guided synthetic acclimation as a strategy to improve biochemical production by a microbial consortium. We designed a consortium comprising alginate-utilizing Vibrio sp. dhg and 3-hydroxypropionic acid (3-HP)-producing Escherichia coli strains for the direct conversion of alginate to 3-HP. We introduced a genetic circuit, named "Population guider", in the E. coli strain, which degrades ampicillin only when 3-HP is produced. In the presence of ampicillin as a selection pressure, the consortium was successfully acclimated for increased 3-HP production by 4.3-fold compared to that by a simple co-culturing consortium during a 48-h fermentation. We believe this concept is a useful strategy for the development of robust consortium-based bioprocesses.

Recent advances and challenges in the bioconversion of acetate to value-added chemicals

Acetate is a major byproduct of the bioconversion of the greenhouse gas carbon dioxide, pretreatment of lignocellulose biomass, and microbial fermentation. The utilization and valorization of acetate have been emphasized in transforming waste to clean energy and value-added platform chemicals, contributing to the development of a closed carbon loop toward a low-carbon circular bio-economy. Acetate has been used to produce several platform chemicals, including succinate, 3-hydroxypropionate, and itaconic acid, highlighting the potential of acetate to synthesize many biochemicals and biofuels. On the other hand, the yields and titers have not reached the theoretical maximum. Recently, recombinant strain development and pathway regulation have been suggested to overcome this limitation. This review provides insights into the important constraints limiting the yields and titers of the biochemical and metabolic pathways of bacteria capable of metabolizing acetate for acetate bioconversion. The current developments in recombinant strain engineering are also discussed.

Kinetic compartmentalization by unnatural reaction for itaconate production

Physical compartmentalization of metabolism using membranous organelles in eukaryotes is helpful for chemical biosynthesis to ensure the availability of substrates from competitive metabolic reactions. Bacterial hosts lack such a membranous system, which is one of the major limitations for efficient metabolic engineering. Here, we employ kinetic compartmentalization with the introduction of an unnatural enzymatic reaction by an engineered enzyme as an alternative strategy to enable substrate availability from competitive reactions through kinetic isolation of metabolic pathways. As a proof of concept, we kinetically isolate the itaconate synthetic pathway from the tricarboxylic acid cycle in Escherichia coli, which is natively separated by mitochondrial membranes in Aspergillus terreus. Specifically, 2-methylcitrate dehydratase is engineered to alternatively catalyze citrate and kinetically secure cis-aconitate for efficient production using a high-throughput screening system. Itaconate production can be significantly improved with kinetic compartmentalization and its strategy has the potential to be widely applicable.

Electrochemical Amino Acid Sensing: A Review on Challenges and Achievements

The rapid growth of research in electrochemistry in the last decade has resulted in a significant advancement in exploiting electrochemical strategies for assessing biological substances. Among these, amino acids are of utmost interest due to their key role in human health. Indeed, an unbalanced amino acid level is the origin of several metabolic and genetic diseases, which has led to a great need for effective and reliable evaluation methods. This review is an effort to summarize and present both challenges and achievements in electrochemical amino acid sensing from the last decade (from 2010 onwards) to show where limitations and advantages stem from. In this review, we place special emphasis on five well-known electroactive amino acids, namely cysteine, tyrosine, tryptophan, methionine and histidine. The recent research and achievements in this area and significant performance metrics of the proposed electrochemical sensors, including the limit of detection, sensitivity, stability, linear dynamic range(s) and applicability in real sample analysis, are summarized and presented in separate sections. More than 400 recent scientific studies were included in this review to portray a rich set of ideas and exemplify the capabilities of the electrochemical strategies to detect these essential biomolecules at trace and even ultra-trace levels. Finally, we discuss, in the last section, the remaining issues and the opportunities to push the boundaries of our knowledge in amino acid electrochemistry even further.

C2 feedstock-based biomanufacturing of value-added chemicals

Engineering microbes to produce value-added chemicals from C6/C5 sugars sometimes requires long biosynthetic pathways, which causes carbon loss due to involving multiple metabolic branch nodes, leading to a lower product yield. Using C2 feedstocks derived from gaseous, cellulosic, and plastic wastes could establish shorter biosynthetic pathways to produce some target chemicals, for example, acetyl-CoA-derived natural products. Utilizing these waste-derived feedstocks would also contribute to reducing the carbon footprint of the chemical industry. In this review, we highlighted the promising waste-processing technologies that could provide C2 feedstocks that are compatible with microbial fermentation. We also analyzed the recent metabolic engineering works in which the microorganisms/fermentation processes were modified/optimized to utilize acetate, ethanol, or ethylene glycol more efficiently.

Biosynthesis of (R)-3-hydroxybutyric acid from syngas-derived acetate in engineered Escherichia coli

Acetate is a potential non-food carbon source for industrial production, coping with the shortage of food-based feedstocks. (R)-3-hydroxybutyric acid (R-3HB) can be used as an important chiral intermediate in the fine chemical and pharmaceutical industry. In this study, the R-3HB biosynthesis pathway was successfully constructed when genes of β-ketothiolase (phaA), acetoacetyl-CoA reductase (phaB) from Ralstonia eutropha, and propionyl-CoA transferases (pct) from Clostridium beijerinckii 8052 were introducedinto Escherichia coli. The effects of host E. coli strains, different propionyl-CoA transferases, and post-induction temperatures were investigated. The final concentration of R-3HB reached 0.86 g/L using acetate as the sole carbon source. Subsequently, a kind of culture broth containing the syngas-derived acetate was used to produce 1.02 g/L of R-3HB with a yield of 0.26 g/g. Inthis study, the engineered E. coli strain could efficiently utilize syngas-derived acetate to synthesize R-3HB.

Metabolic Engineering of Central Carbon Metabolism of Bacillus licheniformis for Enhanced Production of Poly-γ-glutamic Acid

Poly-γ-glutamic acid (γ-PGA) is an anionic polymer with wide-ranging applications in the areas of medicine, light chemical industry, wastewater treatment, and agriculture. However, the production cost of γ-PGA is high for the requirement of adding the expensive precursor L-glutamic acid during fermentation, which hinders its widespread application. In this study, in order to improve γ-PGA yield, central carbon metabolism was engineered to enhance the carbon flux of tricarboxylic acid (TCA) cycle and glutamic acid synthesis in a γ-PGA production strain Bacillus licheniformis WX-02. Firstly, pyruvate dehydrogenase (PdhABCD) and citrate synthase (CitA) were overexpressed to strengthen the flux of pyruvate into TCA cycle, resulting in 34.93% and 11.14% increase of γ-PGA yield in B. licheniformis WX-02, respectively. Secondly, the carbon flux to glyoxylate shunt was rewired via varying the expression of isocitrate lyase (AceA), and a 23.24% increase of γ-PGA yield was obtained in AceA down-regulated strain WXP_bacAaceBA. Thirdly, deletion of pyruvate formate-lyase gene pflB led to a 30.70% increase of γ-PGA yield. Finally, combinatorial metabolic engineering was applied, and γ-PGA titer was enhanced to 12.02 g/L via overexpressing pdhABCD and citA, repressing aceA, and deleting pflB, with a 69.30% improvement compared to WX-02. Collectively, metabolic engineering of central carbon metabolism is an effective strategy for enhanced γ-PGA production in B. licheniformis, and this research provided a promising strain for industrial production of γ-PGA.

Acetate as a potential feedstock for the production of value-added chemicals: Metabolism and applications

Acetate is regarded as a promising carbon feedstock in biological production owing to its possible derivation from C₁ gases such as CO, CO₂ and methane. To best use of acetate, comprehensive understanding of acetate metabolisms from genes and enzymes to pathways and regulations is needed. This review aims to provide an overview on the potential of acetate as carbon feedstock for industrial biotechnology. Biochemical, microbial and biotechnological aspects of acetate metabolism are described. Especially, the current state-of-the art in the production of value-added chemicals from acetate is summarized. Challenges and future perspectives are also provided.

Microbial Upgrading of Acetate into Value-Added Products-Examining Microbial Diversity, Bioenergetic Constraints and Metabolic Engineering Approaches

Ecological concerns have recently led to the increasing trend to upgrade carbon contained in waste streams into valuable chemicals. One of these components is acetate. Its microbial upgrading is possible in various species, with Escherichia coli being the best-studied. Several chemicals derived from acetate have already been successfully produced in E. coli on a laboratory scale, including acetone, itaconic acid, mevalonate, and tyrosine. As acetate is a carbon source with a low energy content compared to glucose or glycerol, energy- and redox-balancing plays an important role in acetate-based growth and production. In addition to the energetic challenges, acetate has an inhibitory effect on microorganisms, reducing growth rates, and limiting product concentrations. Moreover, extensive metabolic engineering is necessary to obtain a broad range of acetate-based products. In this review, we illustrate some of the necessary energetic considerations to establish robust production processes by presenting calculations of maximum theoretical product and carbon yields. Moreover, different strategies to deal with energetic and metabolic challenges are presented. Finally, we summarize ways to alleviate acetate toxicity and give an overview of process engineering measures that enable sustainable acetate-based production of value-added chemicals.

Development of chromosome-based T7 RNA polymerase and orthogonal T7 promoter circuit in Escherichia coli W3110 as a cell factory

Background

Orthogonal T7 RNA polymerase (T7RNAP) and T7 promoter is a powerful genetic element to mediate protein expression in different cells. Among all, Escherichia coli possess advantages of fast growth rate, easy for culture and comprehensive elements for genetic engineering. As E. coli W3110 owns the benefits of more heat shock proteins and higher tolerance to toxic chemicals, further execution of T7-based system in W3110 as cell factory is a conceivable strategy.

Results

Three novel W3110 strains, i.e., W3110:IL5, W3110::L5 and W3110::pI, were accomplished by chromosome-equipped T7RNAP. At first, the LacZ and T7RNAP with isopropyl-β-D-thiogalactopyranoside (IPTG) induction showed higher expression levels in W3110 derivatives than that in BL21(DE3). The plasmids with and without lacI/lacO repression were used to investigate the protein expression of super-fold green fluorescence protein (sfGFP), carbonic anhydrase (CA) for carbon dioxide uptake and lysine decarboxylase (CadA) to produce a toxic chemical cadaverine (DAP). All the proteins showed better expression in W3110::L5 and W3110::pI, respectively. As a result, the highest cadaverine production of 36.9 g/L, lysine consumption of 43.8 g/L and up to 100% yield were obtained in W3110::pI(−) with plasmid pSU-T7-CadA constitutively.

Conclusion

Effect of IPTG and lacI/lacO regulator has been investigated in three chromosome-based T7RNAP E. coli strains. The newly engineered W3110 strains possessed similar protein expression compared to commercial BL21(DE3). Furthermore, W3110::pI displays higher production of sfGFP, CA and CadA, due to it having the highest sensitivity to IPTG, thus it represents the greatest potential as a cell factory.

From Acetate to Bio-Based Products: Underexploited Potential for Industrial Biotechnology

Currently, most biotechnological products are based on microbial conversion of carbohydrate substrates that are predominantly generated from sugar- or starch-containing plants. However, direct competitive uses of these feedstocks in the food and feed industry represent a dilemma, so using alternative carbon sources has become increasingly important in industrial biotechnology. A promising alternative carbon source that may be generated in substantial amounts from lignocellulosic biomass and C1 gases is acetate. This review discusses the underexploited potential of acetate to become a next-generation platform substrate in future industrial biotechnology and summarizes alternative sources and routes for acetate production. Furthermore, biotechnological aspects of microbial acetate utilization and the state of the art of biotechnological acetate conversion into value-added bioproducts are highlighted.

Upcycling chitin-containing waste into organonitrogen chemicals via an integrated process

Chitin is the most abundant renewable nitrogenous material on earth and is accessible to humans in the form of crustacean shell waste. Such waste has been severely underutilized, resulting in both resource wastage and disposal issues. Upcycling chitin-containing waste into value-added products is an attractive solution. However, the direct conversion of crustacean shell waste-derived chitin into a wide spectrum of nitrogen-containing chemicals (NCCs) is challenging via conventional catalytic processes. To address this challenge, in this study, we developed an integrated biorefinery process to upgrade shell waste-derived chitin into two aromatic NCCs that currently cannot be synthesized from chitin via any chemical process (tyrosine and l-DOPA). The process involves a pretreatment of chitin-containing shell waste and an enzymatic/fermentative bioprocess using metabolically engineered Escherichia coli The pretreatment step achieved an almost 100% recovery and partial depolymerization of chitin from shrimp shell waste (SSW), thereby offering water-soluble chitin hydrolysates for the downstream microbial process under mild conditions. The engineered E. coli strains produced 0.91 g/L tyrosine or 0.41 g/L l-DOPA from 22.5 g/L unpurified SSW-derived chitin hydrolysates, demonstrating the feasibility of upcycling renewable chitin-containing waste into value-added NCCs via this integrated biorefinery, which bypassed the Haber-Bosch process in providing a nitrogen source.

Engineering Corynebacterium glutamicum for the Efficient Production of 3-Hydroxypropionic Acid from a Mixture of Glucose and Acetate via the Malonyl-CoA Pathway

3-Hydroxypropionic acid (3-HP) has been recognized as one of the top value-added building block chemicals, due to its numerous potential applications. Over the past decade, biosynthesis of 3-HP via the malonyl-CoA pathway has been increasingly favored because it is balanced in terms of ATP and reducing equivalents, does not require the addition of costly coenzymes, and can utilize renewable lignocellulosic biomass. In this study, gene mcr encoding malonyl-CoA reductase from Chloroflexus aurantiacus was introduced into Corynebacterium glutamicum ATCC13032 to construct the strain Cgz1, which accumulated 0.30 g/L 3-HP. Gene ldhA encoding lactate dehydrogenase was subsequently deleted to eliminate lactate accumulation, but this decreased 3-HP production and greatly increased acetate accumulation. Then, different acetate utilization genes were overexpressed to reuse the acetate, and the best candidate Cgz5 expressing endogenous gene pta could effectively reduce the acetate accumulation and produced 0.68 g/L 3-HP. To enhance the supply of the precursor acetyl-CoA, acetate was used as an ancillary carbon source to improve the 3-HP production, and 1.33 g/L 3-HP could be produced from a mixture of glucose and acetate, with a 2.06-fold higher yield than from glucose alone. Finally, to inhibit the major 3-HP competing pathway-fatty acid synthesis, 10 μM cerulenin was added and strain Cgz5 produced 3.77 g/L 3-HP from 15.47 g/L glucose and 4.68 g/L acetate with a yield of 187 mg/g substrate in 48 h, which was 12.57-fold higher than that of Cgz1. To our best knowledge, this is the first report on engineering C. glutamicum to produce 3-HP via the malonyl-CoA pathway. The results indicate that the innocuous biosafety level I microorganism C. glutamicum is a potential industrial 3-HP producer.

Context-dependency of synthetic minimal promoters in driving gene expression: a case study

Synthetic promoters are considered ideal candidates in driving robust gene expression. Most of the available synthetic promoters are minimal promoters, for which the upstream sequence of the 5' end of the core region is usually excluded. Although the upstream sequence has been shown to mediate transcription of natural promoters, its impact on synthetic promoters has not been widely studied. Here, a library of chromosomal DNA fragments is randomly fused with the 5' end of the J23119 synthetic promoter, and the transcriptional performance of the promoter is evaluated through β-galactosidase assay, fluorescence intensity and chemical biosynthesis. Results show that changes in the upstream sequence can induce significant variation in the promoter strength of up to 5.8-fold. The effect is independent of the length of the insertions and the number of potential transcription factor binding sites. Several DNA fragments that are able to enhance the transcription of both the natural and the synthetic promoters are identified. This study indicates that the synthetic minimal promoters are susceptible to the surrounding sequence context. Therefore, the upstream sequence should be treated as an indispensable component in the design and application of synthetic promoters, or as an independent genetic part for the fine-tuning of gene expression.

Efficient Biosynthesis of Succinate from Paper Mill Wastewater by Engineered Escherichia coli

A large amount of wastewater containing various organic compounds is generated in the paper-making industry. Therefore, the re-utilization of wastewater from paper-making is of great importance. In this study, acetic acid and formic acid, the dominant inhibitors existing in the paper mill wastewater, were used to produce succinate by metabolically engineered Escherichia coli strains, HB04(pTrc99a-gltA) and HB04(pTrc99a-gltA, pBAD33-Trc-fdh). The distilled paper mill wastewater could be utilized and transformed directly to succinate efficiently. However, the utilization of acetate was inhibited dramatically using raw paper mill wastewater. After adsorption by activate carbon, the acetate consumption and succinate production were improved significantly. In the resting cells experiment with high cell density (50 OD₆₀₀), acetate was consumed completely and the titer of succinate reached 65.44 mM in 6 h. These results showed that the metabolically engineered E. coli strains had great potential to utilize acetic acid in the paper mill wastewater for succinate biosynthesis.