Coronary microvascular dysfunction: prevalence and aetiology in patients with suspected myocardial ischaemia

AIM

To evaluate the prevalence, aetiology, and corresponding morbidity of coronary microvascular dysfunction (CMD) in patients with suspected myocardial ischaemia.

MATERIALS AND METHODS

The present study included 115 patients with suspected myocardial ischaemia who underwent stress perfusion cardiac magnetic resonance imaging. CMD was assessed visually based on the myocardial perfusion results. The CMR-derived myocardial perfusion reserve index (MPRI) and left ventricular (LV) strain parameters obtained using the post-processing software CVI42 were employed to evaluate LV myocardial perfusion and deformation. LV strain parameters included global longitudinal, circumferential, and radial strain (GLS, GCS, and GRS), global systolic/diastolic longitudinal, circumferential, and radial strain rates (SLSR, SCSR, SRSR, DLSR, DCSR, and DRSR).

RESULTS

Of the 115 patients, 12 patients were excluded and 103 patients were finally included in the study. CMD was observed in 79 % (81 patients, aged 53 ± 12 years) of patients. Regarding aetiology, 91 (88 %) patients had non-obstructive coronary artery disease (CAD), eight (8 %) had obstructive CAD, and four (4 %) had hypertrophic cardiomyopathy (HCM). The incidence of CMD was highest (100 %) in patients with HCM, followed by those with non-obstructive CAD (up to 79 %). There were no statistical differences between CMD and non-CMD groups in GCS, GRS, GLS, SRSR, SCSR, SLSR, DCSR, DRSR and DLSR.

CONCLUSION

The incidence of CMD was higher in patients with signs and symptoms of ischaemia. CMD occurred with non-obstructive CAD, obstructive CAD, and HCM, with the highest prevalence of CMD in HCM.

Graphene Hybrid Tough Hydrogels with Nanostructures for Tissue Regeneration

Over the past few decades, hydrogels have attracted considerable attention as promising biomedical materials. However, conventional hydrogels require improved mechanical properties, such as brittleness, which significantly limits their widespread use. Recently, hydrogels with remarkably improved toughness have been developed; however, their low biocompatibility must be addressed. In this study, we developed a tough graphene hybrid hydrogel with nanostructures. The resultant hydrogel exhibited remarkable mechanical properties while representing an aligned nanostructure that resembled the extracellular matrix of soft tissue. Owing to the synergistic effect of the topographical properties, and the enhanced biochemical properties, the graphene hybrid hydrogel had excellent stretchability, resilience, toughness, and biocompatibility. Furthermore, the hydrogel displayed outstanding tissue regeneration capabilities (e.g., skin and tendons). Overall, the proposed graphene hybrid tough hydrogel may provide significant insights into the application of tough hydrogels in tissue regeneration.

Biofilm removal effect of diatom complex on 3D printed denture base resin

For patients who have difficulty in mechanical cleaning of dental appliances, a denture cleaner that can remove biofilm with dense extracellular polymeric substances is needed. The purpose of this study is to evaluate the efficacy of diatom complex with active micro-locomotion for removing biofilms from 3D printed dentures. The diatom complex, which is made by doping MnO2 nanosheets on diatom biosilica, is mixed with H2O2 to generate fine air bubbles continuously. Denture base resin specimens were 3D printed in a roof shape, and Pseudomonas aeruginosa (107 CFU/mL) was cultured on those for biofilm formation. Cleaning solutions of phosphate-buffered saline (negative control, NC), 3% H2O2 with peracetic acid (positive control, PC), denture cleanser tablet (DCT), 3% H2O2 with 2 mg/mL diatom complex M (Melosira, DM), 3% H2O2 with 2 mg/mL diatom complex A (Aulacoseira, DA), and DCT with 2 mg/mL DM were prepared and applied. To assess the efficacy of biofilm removal quantitatively, absorbance after cleaning was measured. To evaluate the stability of long-term use, surface roughness, ΔE, surface micro-hardness, and flexural strength of the 3D printed dentures were measured before and after cleaning. Cytotoxicity was evaluated using Cell Counting Kit-8. All statistical analyses were conducted using SPSS for Windows with one-way ANOVA, followed by Scheffe's test as a post hoc (p < 0.05). The group treated with 3% H2O2 with DA demonstrated the lowest absorbance value, followed by the groups treated with 3% H2O2 with DM, PC, DCT, DCT + DM, and finally NC. As a result of Scheffe's test to evaluate the significance of difference between the mean values of each group, statistically significant differences were shown in all groups based on the NC group. The DA and DM groups showed the largest mean difference though there was no significant difference between the two groups. Regarding the evaluation of physical and mechanical properties of the denture base resin, no statistically significant differences were observed before and after cleaning. In the cytotoxicity test, the relative cell count was over 70%, reflecting an absence of cytotoxicity. The diatom complex utilizing active micro-locomotion has effective biofilm removal ability and has a minimal effect in physical and mechanical properties of the substrate with no cytotoxicity.

Transparent Intracellular Sensing Platform with Si Needles for Simultaneous Live Imaging

Vertically ordered Si needles are of particular interest for long-term intracellular recording owing to their capacity to infiltrate living cells with negligible damage and minimal toxicity. Such intracellular recordings could greatly benefit from simultaneous live cell imaging without disrupting their culture, contributing to an in-depth understanding of cellular function and activity. However, the use of standard live imaging techniques, such as inverted and confocal microscopy, is currently impeded by the opacity of Si wafers, typically employed for fabricating vertical Si needles. Here, we introduce a transparent intracellular sensing platform that combines vertical Si needles with a percolated network of Au-Ag nanowires on a transparent elastomeric substrate. This sensing platform meets all prerequisites for simultaneous intracellular recording and imaging, including electrochemical impedance, optical transparency, mechanical compliance, and cell viability. Proof-of-concept demonstrations of this sensing platform include monitoring electrical potentials in cardiomyocyte cells and in three-dimensionally engineered cardiovascular tissue, all while conducting live imaging with inverted and confocal microscopes. This sensing platform holds wide-ranging potential applications for intracellular research across various disciplines such as neuroscience, cardiology, muscle physiology, and drug screening.

Intracerebral Nanoparticle Transport Facilitated by Alzheimer Pathology and Age

Nanoparticles have emerged as potential transporters of drugs targeting Alzheimer's disease (AD), but their design should consider the blood-brain barrier (BBB) integrity and neuroinflammation of the AD brain. This study presents that aging is a significant factor for the brain localization and retention of nanoparticles, which we engineered to bind with reactive astrocytes and activated microglia. We assembled 200 nm-diameter particles using a block copolymer of poly(lactic-co-glycolic acid) (PLGA) and CD44-binding hyaluronic acid (HA). The resulting PLGA-b-HA nanoparticles displayed increased binding to CD44-expressing reactive astrocytes and activated microglia. Upon intravascular injection, nanoparticles were localized to the hippocampi of both APP/PS1 AD model mice and their control littermates at 13-16 months of age due to enhanced transvascular transport through the leaky BBB. No particles were found in the hippocampi of young adult mice. These findings demonstrate the brain localization of nanoparticles due to aging-induced BBB breakdown regardless of AD pathology.

In-drop thermal cycling of microcrystal assembly for senescence control (MASC) with minimal variation in efficacy

The secretome from mesenchymal stem cells (MSCs) has recently gained attention for new therapeutics. However, clinical application requires in vitro cell manufacturing to attain enough cells. Unfortunately, this process often drives MSCs into a senescent state that drastically changes cellular secretion activities. Antioxidants are used to reverse and prevent the propagation of senescence; however, their activity is short-lived. Polymer-stabilized crystallization of antioxidants has been shown to improve bioactivity, but the broad crystal size distribution (CSD) significantly increases the efficacy variation. Efforts were made to crystalize drugs in microdroplets to narrow the CSD, but the fraction of drops containing at least one crystal can be as low as 20%. To this end, this study demonstrates that in-drop thermal cycling of hyaluronic acid-modified antioxidant crystals, named microcrystal assembly for senescence control (MASC), can drive the fraction of microdrops containing crystals to >86% while achieving significantly narrower CSDs (13±3μm) than in bulk (35±11μm). Therefore, this approach considerably improves the practicality of CSD-control in drops. In addition to exhibiting uniform release, MASC made with antioxidizing N-acetylcysteine extended the release time by 40%. MASC further improves the restoration of reactive oxygen species homeostasis in MSCs, thus minimizing cellular senescence and preserving desired secretion activities. We propose that MASC is broadly useful to controlling senescence of a wide array of therapeutic cells during biomanufacturing.

[Effects of macrophage glycolytic reprogramming on tuberculosis granuloma formation]

The formation of granulomatous lesions is a typical pathological feature of tuberculosis, and infection with Mycobacterium tuberculosis is the main cause. Although the mechanism underlying granuloma formation remains unclear, increasing evidence suggests that immune metabolism plays an important role. In this review, we summarized the latest advances in macrophage glycolytic reprogramming in tuberculosis granuloma formation to discover new methods for early diagnosis and provided new ideas for tuberculosis therapeutics based on the regulation of immune metabolism.

Fabrication of THz corrugated wakefield structure and its high power test

We present overall process for developing terahertz (THz) corrugated structure and its beam-based measurement results. 0.2-THz corrugated structures were fabricated by die stamping method as the first step demonstration towards GW THz radiation source and GV/m THz wakefield accelerator. 150-[Formula: see text]m thick disks were produced from an OFHC (C10100) foil by stamping. Two types of disks were stacked alternately to form 46 mm structure with [Formula: see text] 170 corrugations. Custom assembly was designed to provide diffusion bonding with a high precision alignment of disks. The compliance of the fabricated structure have been verified through beam-based wakefield measurement at Argonne Wakefield Accelerator Facility. Both measured longitudinal and transverse wakefield showed good agreement with simulated wakefields. Measured peak gradients, 9.4 MV/m/nC for a long single bunch and 35.4 MV/m/nC for a four bunch trains, showed good agreement with the simulation.

Antimicrobial efficacy of self-locomotive manganese oxide nanozyme-doped diatom microbubbler on orthodontic brackets in vitro

BACKGROUND

Orthodontic brackets provide a favorable environment for Streptococcus mutans biofilm formation, increasing the risk of white spots and dental caries. Manganese oxide (MnO₂) nanozyme-doped diatom microbubbler (DM) is a recently developed material for biofilm removal. DM can generate oxygen by catalase-mimicking activity in Hydrogen peroxide (H₂O₂) solution and move with ejecting oxygen microbubbles to produce a mechanical self-cleansing effect. This study aimed to evaluate the feasibility of DM as a novel bracket cleaner.

METHODS

DM was prepared according to the protocol and analyzed using a scanning electron microscope (SEM). We treated S. mutans biofilms grown over bracket with phosphate-buffered saline (PBS group), 0.12% chlorhexidine (CHX group), 3% H₂O₂ (H₂O₂ group), and co-treatment with 3 mg/mL of DM and 3% H₂O₂ (DM group). The biofilm removal effect was analyzed using crystal violet assay, and the results were observed using SEM. The viability of S. mutans in remaining biofilms was evaluated using confocal laser scanning microscopy (CLSM). Finally, we examined the effect of all materials on mature multispecies biofilms formed on debonded brackets.

RESULTS

Crystal violet assay results revealed that the CHX group removed more biofilms than the control group, and the DM group removed biofilms more effectively than the CHX group (p < 0.0001). SEM and CLSM images showed that CHX killed S. mutans but failed to remove most biofilms on brackets. However, DM effectively removed biofilms and mature multispecies biofilms on debonded brackets (p < 0.0001).

CONCLUSIONS

Co-treatment with DM and H₂O₂ is effective in removing biofilms on orthodontic brackets compared to conventional antibacterial agents.

Removal effect of Candida albicans biofilms from the PMMA resin surface by using a manganese oxide nanozyme-doped diatom microbubbler

To prevent oral candidiasis, removal of the Candida biofilms from dentures is important. However, common denture cleaners are insufficiently effective in removing biofilms. A manganese oxide (MnO₂) nanozyme-doped diatom microbubbler (DM) can generate oxygen gas microbubbles by a catalase-mimicking activity in hydrogen peroxide (H₂O₂). DM can invade and destroy biofilms with the driving force of continuously generated microbubbles. In this study, the Candida biofilm removal efficiency by co-treatment of DM and H₂O₂ was investigated. Diatom particles were reacted with (3-aminopropyl)triethoxysilane to prepare amine-substituted diatom particles. These particles were reacted with potassium permanganate to fabricate DMs. The morphology and components of DM were analyzed by using a scanning electron microscope (SEM). Four types of denture base resin specimens on which biofilms of Candida albicans were formed were treated with phosphate-buffered saline (PBS group), Polident 5-Minute (Polident group), 0.12% chlorhexidine gluconate (CHX group), 3% H₂O₂ (H₂O₂ group), and co-treatment of 3 mg/mL of DM and 3% H₂O₂ (DM group). The biofilm removal effect of each group was quantitatively analyzed by crystal violet assay, and the results were visually confirmed by SEM images. After each treatment, the remaining C. albicans were stained with Hoechst 33342/propidium iodide, and observed with confocal laser scanning microscopy (CLSM) to evaluate the viability. MnO₂ nanozyme sheets were successfully doped on the surface of the fabricated DM. Although biofilms were not effectively removed in the Polident and CHX groups, CLSM images showed that CHX was able to effectively kill C. albicans in the biofilms on all resin specimen types. According to the crystal violet analysis, the H₂O₂ groups removed the biofilms on heat-activated and 3D-printed resins (P < .01), but could not remove the biofilms on autopolymerizing and milled resins significantly (P = .1161 and P = .1401, respectively). The DM groups significantly removed C. albicans from all resin specimen types (P < .01).

Extracellular Microenvironmental Control for Organoid Assembly

Organoids, which are multicellular clusters with similar physiological functions to living organs, have gained increasing attention in bioengineering. As organoids become more advanced, methods to form complex structures continue to develop. There is evidence that the extracellular microenvironment can regulate organoid quality. The extracellular microenvironment consists of soluble bioactive molecules, extracellular matrix, and biofluid flow. However, few efforts have been made to discuss the microenvironment optimal to engineer specific organoids. Therefore, this review article examines the extent to which engineered extracellular microenvironments regulate organoid quality. First, we summarize the natural tissue and organ's unique chemical and mechanical properties, guiding researchers to design an extracellular microenvironment used for organoid engineering. Then, we summarize how the microenvironments contribute to the formation and growth of the brain, lung, intestine, liver, retinal, and kidney organoids. The approaches to forming and evaluating the resulting organoids are also discussed in detail. Impact statement Organoids, which are multicellular clusters with similar physiological function to living organs, have been gaining increasing attention in bioengineering. As organoids become more advanced, methods to form complex structures continue to develop. This review article focuses on recent efforts to engineer the extracellular microenvironment in organoid research. We summarized the natural organ's microenvironment, which informs researchers of key factors that can influence organoid formation. Then, we summarize how these microenvironmental controls significantly contribute to the formation and growth of the corresponding brain, lung, intestine, liver, retinal, and kidney organoids. The approaches to forming and evaluating the resulting organoids are discussed in detail, including extracellular matrix choice and properties, culture methods, and the evaluation of the morphology and functionality through imaging and biochemical analysis.

Extending the Bioavailability of Hydrophilic Antioxidants for Metal Ion Detoxification via Crystallization with Polysaccharide Dopamine

Although metal ions, such as silver and gold, have been shown to have strong antimicrobial properties, their potential to have toxic effects on human and environmental health has gained interest with an improved understanding of their mechanisms to promote oxidative stress. Redox control is a major focus of many drug delivery systems and often incorporates an antioxidant as the active pharmaceutical ingredient (API) to neutralize overproduced reactive oxygen species (ROS). Nevertheless, there are still limitations with bioavailability and extended redox control with regard to antioxidant drug delivery. Herein, this study develops a colloidal antioxidant crystal system that dissolves sustainably through polymer stabilization using sodium hyaluronate conjugated with dopamine (HA-dopa). We explore the role of dopamine incorporation into crystal-stabilizing polymers and quantify the balance between drug-polymer interactions and competing polymer-polymer interactions. We propose that this type of analysis is useful in the engineering of and provides insight into the release behavior of polymer-crystal complexes. In developing our crystal complex, N-acetylcysteine (NAC) was used as the model antioxidant to protect against silver ion toxicity. We found that our optimized HA-dopa-stabilized NAC crystals prolong the release time of NAC 5-fold compared to a polymer-free NAC crystal. Therefore, following sublethal exposure to AgNO₃, the extended lifetime of NAC was able to maintain normal intracellular ROS levels, modulate metabolic function, mitigate fluctuations in ATP levels and ATP synthase activity, and preserve contraction frequency in engineered cardiac muscle tissue. Furthermore, the protective effects of the HA-dopa-stabilized NAC crystals were extended to a Daphnia magna model where silver-ion-induced change to both cell-level biochemistry and organ function was alleviated. As such, we propose that the packaging of hydrophilic antioxidants as colloidal crystals drastically extends the lifetime of the API, better maintains ROS homeostasis post metal ion exposure, and therefore preserves both intracellular biochemistry and tissue functionality.

[Progress in clinical diagnosis and treatment of multiple primary lung cancer]

With the application of high-resolution chest imaging system and lung cancer screening program, patients with multiple primary lung cancer (MPLC) are becoming a growing population in clinical practice. However, the diagnostic criteria of MPLC and its differentiation from intrapulmonary metastasis of lung cancer (IM) are still controversial, especially in cases with similar histology. On the basis of reviewing the existing literature, this paper discusses the changes of the diagnostic criteria of MPLC and the differential diagnosis methods of imaging, histology and molecular genetics of MPLC and IM, and briefly introduces the application of multidisciplinary diagnosis, algorithm, predictive model and artificial intelligence in the differential diagnosis of MPLC. In addition, we also discuss the latest progress in the treatment of MPLC. Radical surgery is the main method for the treatment of MPLC. Stereotactic body radiation therapy (SBRT) is safe and feasible for inoperable MPLC patients, and targeted therapy and immunotherapy can also be used in MPLC after appropriate patient selection.

Self-locomotive, antimicrobial microrobot (SLAM) swarm for enhanced biofilm elimination

Biofilm is a major cause of infections and infrastructure deterioration, largely due to molecular diffusion restrictions that hamper the antimicrobial activity of traditional antibiotics and disinfectants. Here, we present a self-locomotive, antimicrobial microrobot (SLAM) swarm that can penetrate, fracture, and detach biofilm and, in turn, nullify bacterial resistance to antibiotics. The SLAM is assembled by loading a controlled mass of manganese oxide nanosheets on diatoms with the polydopamine binder. In hydrogen peroxide solution, SLAMs produce oxygen bubbles that generate thrust to penetrate the rigid and dense Pseudomonas aeruginosa biofilm and self-assemble into a swarm that repeatedly surrounds, expands, and bursts oxygen bubbles. The resulting cavities continue to deform and fracture extracellular polymeric substances from microgrooved silicone substrates and wounded skin explants while decreasing the number of viable bacterial cells. Additionally, SLAM allows irrigating water or antibiotics to access the residual biofilm better, thus enhancing the synergistic efficacy in killing up to 99.9% of bacterial cells.

Empowering engineered muscle in biohybrid pump by extending connexin 43 duration with reduced graphene oxides

Engineered skeletal muscle act as therapeutics invaluable to treat injured or diseased muscle and a "living" material essential to assemble biological machinery. For normal development, skeletal myoblasts should express connexin 43, one of the gap junction proteins that promote myoblast fusion and myogenesis, during the early differentiation stage. However, myoblasts cultured in vitro often down-regulate connexin 43 before differentiation, limiting myogenesis and muscle contraction. This study demonstrates that tethering myoblasts with reduced graphene oxide (rGO) slows connexin 43 regression during early differentiation and increases myogenic mRNA synthesis. The whole RNA sequencing also confirms that the rGO on cells increases regulator genes for myogenesis, including troponin, while decreasing negative regulator genes. The resulting myotubes generated a three-fold larger contraction force than the rGO-free myotubes. Accordingly, a valveless biohybrid pump assembled with the rGO-tethered muscle increased the fluid velocity and flow rate considerably. The results of this study would provide an important foundation for developing physiologically relevant muscle and powering up biomachines that will be used for various bioscience studies and unexplored applications.

Manganese Oxide Nanozyme-Doped Diatom for Safe and Efficient Treatment of Peri-Implantitis

Peri-implantitis is a major cause of dental implant failure. Bacterial biofilm contamination on the implant induces surrounding bone resorption and soft tissue inflammation, leading to severe deterioration of oral health. However, conventional biofilm removal procedures, such as mechanical decontamination and antiseptic application, are not effective enough to induce reosseointegration on decontaminated implant surfaces. This is due to (1) incomplete decontamination of the biofilm from inaccessible areas and (2) physicochemical alteration of implant surfaces caused by decontamination procedures. Herein, a safe and effective therapeutic approach for peri-implantitis is developed, which involves decontamination of implant-bound biofilms using the kinetic energy of microsized oxygen bubbles generated from the catalytic reaction between hydrogen peroxide (H₂O₂) and manganese oxide (MnO₂) nanozyme sheet-doped silica diatom microparticles (Diatom Microbubbler, DM). Rapidly moving microsized DM particles are able to penetrate narrow spaces between implant screws, exerting just the right amount of force to entirely destroy biofilms without harming the surrounding mucosa or implant surfaces, as opposed to conventional antiseptics such as chlorhexidine or 3% H₂O₂ when used alone. Consequently, decontamination with DM facilitates successful reosseointegration on the peri-implantitis-affected implant surface. In summary, our new DM-based therapeutic approach will become a promising alternative to resolve clinically challenging aspects of peri-implantitis.

Transcriptomic and physiological analysis of endocrine disrupting chemicals Impacts on 3D Zebrafish liver cell culture system

In recent decades, extensive efforts have focused on developing in vitro platforms mimicking fish livers to better understand the acute or chronic effects of toxicants on lower aquatic vertebrates. Fish liver cell lines have emerged as a promising culture system for these in vitro platforms because they complement the currently limited in vitro tools that mostly consist of mammalian cell lines and adhere to the 3Rs: replacement, reduction, and refinement of living animal tests. However, monolayer cell lines have lower transcriptional and physiological responses upon exposure to toxic chemicals than freshly isolated primary cells. To overcome this challenge, we utilized a three-dimensional (3D) spheroid-based in vitro platform, in which hepatocyte cells had self-organized into spheroid forms via E-cadherin bonds. This platform exhibited augmented transcriptomic and phenotypic regulation of liver cells in comparison to monolayer cells. We examined the organoid platform using the zebrafish liver (ZFL) cell line as a model system. ZFL cells spontaneously clustered into 3D spheroids with long-term viability by optimizing cell seeding density on a non-adherent substrate. Interestingly, 3D ZFL spheroids treated with estrogenic chemicals were activated to synthesize a higher level of vitellogenin (Vtg) than monolayer cells. Whole-transcriptome sequencing analysis confirmed that 3D ZFL spheroids had greater transcriptional regulation of genes related to reproductive toxicological response and liver functions, such as the urea cycle, estrogen receptors, and vitellogenin, compared to monolayer cells. These results may contribute to the engineering of novel 3D in vitro platforms for screening harmful chemicals and improving understanding of the underlying liver toxicity mechanisms at the molecular and cellular levels.

Adaptive biohybrid pumping machine with flow loop feedback

Tissue-engineered living machines is an emerging discipline that employs complex interactions between living cells and engineered scaffolds to self-assemble biohybrid systems for diverse scientific research and technological applications. Here, we report an adaptive, autonomous biohybrid pumping machine with flow loop feedback powered by engineered living muscles. The tissue is made from skeletal muscle cells (C2C12) and collagen  /Matrigel matrix, which self-assembles into a ring that compresses a soft tube connected at both ends to a rigid fluidic platform. The muscle ring contracts in a cyclic fashion autonomously, squeezing the tube forming an impedance pump. The resulting flow is circulated back to the muscle ring forming a feedback loop, which allows the pump to respond to the cues received from the flow it generates and adaptively manage its pumping performances based on the feedback. The developed biohybrid pumping system may have broad utility and impact in health, medicine and bioengineering.

Effects of mechanical properties of gelatin methacryloyl hydrogels on encapsulated stem cell spheroids for 3D tissue engineering

Cell spheroids are three-dimensional cell aggregates that have been widely employed in tissue engineering. Spheroid encapsulation has been explored as a method to enhance cell-cell interactions. However, the effect of hydrogel mechanical properties on spheroids, specifically soft hydrogels (<1 kPa), has not yet been studied. In this study, we determined the effect of encapsulation of stem cell spheroids by hydrogels crosslinked with different concentrations of gelatin methacryloyl (GelMA) on the functions of the stem cells. To this end, human adipose-derived stem cell (ADSC) spheroids with a defined size were prepared, and spheroid-laden hydrogels with various concentrations (5, 10, 15%) were fabricated. The apoptotic index of cells from spheroids encapsulated in the 15% hydrogel was high. The migration distance was five-fold higher in cells encapsulated in the 5% hydrogel than the 10% hydrogel. After 14 days of culture, cells from spheroids in the 5% hydrogel were observed to have spread and proliferated. Osteogenic factor and pro-angiogenic factor production in the 15% hydrogel was high. Collectively, our results indicate that the functionality of spheroids can be regulated by the mechanical properties of hydrogel, even under 1 kPa. These results indicate that spheroid-laden hydrogels are suitable for use in 3D tissue construction.

Evolution of the grass leaf by primordium extension and petiole-lamina remodeling

[Figure: see text].

Label-free SARS-CoV-2 detection and classification using phase imaging with computational specificity

Efforts to mitigate the COVID-19 crisis revealed that fast, accurate, and scalable testing is crucial for curbing the current impact and that of future pandemics. We propose an optical method for directly imaging unlabeled viral particles and using deep learning for detection and classification. An ultrasensitive interferometric method was used to image four virus types with nanoscale optical path-length sensitivity. Pairing these data with fluorescence images for ground truth, we trained semantic segmentation models based on U-Net, a particular type of convolutional neural network. The trained network was applied to classify the viruses from the interferometric images only, containing simultaneously SARS-CoV-2, H1N1 (influenza-A virus), HAdV (adenovirus), and ZIKV (Zika virus). Remarkably, due to the nanoscale sensitivity in the input data, the neural network was able to identify SARS-CoV-2 vs. the other viruses with 96% accuracy. The inference time for each image is 60 ms, on a common graphic-processing unit. This approach of directly imaging unlabeled viral particles may provide an extremely fast test, of less than a minute per patient. As the imaging instrument operates on regular glass slides, we envision this method as potentially testing on patient breath condensates. The necessary high throughput can be achieved by translating concepts from digital pathology, where a microscope can scan hundreds of slides automatically.

Histatin-1 is an endogenous ligand of the sigma-2 receptor

The Sigma-2 receptor (S2R) (a.k.a TMEM97) is an important endoplasmic reticular protein involved in cancer, cholesterol processing, cell migration, and neurodegenerative diseases, including Niemann-Pick Type C. While several S2R pharmacologic agents have been discovered, its recent (2017) cloning has limited biological investigation, and no endogenous ligands of the S2R are known. Histatins are a family of endogenous antimicrobial peptides that have numerous important effects in multiple biological systems, including antifungal, antibacterial, cancer pathogenesis, immunomodulation, and wound healing. Histatin-1 (Hst1) has important roles in epithelial wound healing and cell migration, and is the primary wound healing agent in saliva. Little is understood about the downstream machinery that underpins the effects of histatins, and no mammalian receptor is known to date. In this study, we show, using biophysical methods and functional assays, that Hst1 is an endogenous ligand for S2R and that S2R is a mammalian receptor for Hst1.

The Cholesterol Metabolite 27HC Increases Secretion of Extracellular Vesicles Which Promote Breast Cancer Progression

Cholesterol has been implicated in the clinical progression of breast cancer, a disease that continues to be the most commonly diagnosed cancer in women. Previous work has identified the cholesterol metabolite 27-hydroxycholesterol (27HC) as a major mediator of the effects of cholesterol on breast tumor growth and progression. 27HC can act as an estrogen receptor (ER) modulator to promote the growth of ERα+ tumors, and as a liver X receptor (LXR) ligand in myeloid immune cells to establish an immune-suppressive program. In fact, the metastatic properties of 27HC require the presence of myeloid cells with neutrophils (polymorphonuclear neutrophils; PMNs) being essential for the increase in lung metastasis in murine models. In an effort to further elucidate the mechanisms by which 27HC alters breast cancer progression, we made the striking finding that 27HC promoted the secretion of extracellular vesicles (EVs), a diverse assortment of membrane bound particles that includes exosomes. The resulting EVs had a size distribution that was skewed slightly larger than EVs generated by treating cells with vehicle. The increase in EV secretion and size was consistent across 3 different subtypes: primary murine PMNs, RAW264.7 monocytic cells, and 4T1 murine mammary cancer cells. Label-free analysis of 27HC-EVs indicated that they had a different metabolite composition to those from vehicle-treated cells. Importantly, 27HC-EVs from primary PMNs promoted tumor growth and metastasis in 2 different syngeneic models, demonstrating the potential role of 27HC-induced EVs in the progression of breast cancer. EVs from PMNs were taken up by cancer cells, macrophages, and PMNs, but not T cells. Since EVs did not alter proliferation of cancer cells, it is likely that their protumor effects are mediated through interactions with myeloid cells. Interestingly, RNA-seq analysis of tumors from 27HC-EV-treated mice do not display significantly altered transcriptomes, suggesting that the effects of 27HC-EVs occur early on in tumor establishment and growth. Future work will be required to elucidate the mechanisms by which 27HC increases EV secretion, and how these EVs promote breast cancer progression. Collectively, however, our data indicate that EV secretion and content can be regulated by a cholesterol metabolite, which may have detrimental effects in terms of disease progression, important findings given the prevalence of both breast cancer and hypercholesterolemia.

Shear-Resistant, Biological Tethering of Nanostimulators for Enhanced Therapeutic Cell Paracrine Factor Secretion

Mesenchymal stromal cells (MSCs) secreting multiple growth factors and immunomodulatory cytokines are promising for regenerative medicine. To further enhance their secretory activity, efforts have emerged to tether nanosized carriers of secretory stimuli, named nanostimulators, to the MSC surface by forming nonchemical bonds. Despite some successes, there is a great need to improve the retention of nanostimulators during transport through a syringe needle, where high shear stress exerted on the cell surface separates them. To this end, we hypothesize that poly(lactic-co-glycolic acid)-block-hyaluronic acid (PLGA-HA) conjugated with integrin-binding RGD peptides, denoted PLGA-HA-RGD, can form nanostimulators that remain on the cell surface stably during the injection. The resulting HA-CD44 and RGD-integrin bonds would synergistically increase the adhesion strength of nanostimulators. Interestingly, nanostimulators prepared with PLGA-HA-RGD show 3- to 6-fold higher retention than those made with PLGA-HA. Therefore, the PLGA-HA-RGD nanostimulators induced MSCs to secrete 1.5-fold higher vascular endothelial growth factors and a 1.2-fold higher tissue inhibitor of matrix metalloproteinase-1 as compared to PLGA-HA nanostimulators. Consequently, MSCs tethered with PLGA-HA-RGD nanostimulators served to stimulate endothelial cell activities to form a blood vessel-like endothelial lumen with increased length and number of junctions. The nanostimulator design strategy would also be broadly applicable to regulate, protect, and home a broad array of therapeutic or immune cells by tethering carriers with bioactive molecules of interest.

Cell-Free DNA Tissue Damage Mapping in Transplant Patients Infected with COVID-19

Purpose

Patients with COVID-19 show variable clinical course; transplant patients often show worse outcomes. The effect of COVID-19 on the allograft and the sources of tissue injury that contribute to such poor outcomes are poorly defined. This study leverages cell-free DNA (cfDNA) to measure allograft injury as donor-derived cfDNA (ddcfDNA) and injury from different tissue types using tissue-specific DNA methylomic signatures.

Methods

14 consecutive COVID-19 transplant patients (8 Kidney, 3 Lung, 1 Heart, 1 Liver, and one multi-organ transplant patients) and 30 healthy controls were included. Plasma nuclear cfDNA (ncfDNA) and mitochondrial cfDNA (mtcfDNA) level were measured via digital droplet PCR, and ddcfDNA using AlloSure (CareDx). cfDNA whole-genome bisulfite sequencing was performed to identify cfDNA tissues of origin leveraging tissue specific DNA methylomes and deconvolution algorithm.

Results

75% of the COVID-19 transplant patients showed high ddcfDNA level compared to published quiescent values, including all lung, 50% of the kidney, liver and multi-organ transplant patients (8.5, 4.4, 30 and 16-X fold change, respectively). Total ncfDNA and mtcfDNA were 15X and 310X higher in COVID-19 transplant patients compared to controls, respectively; < 0.0001.The predominant tissues contributing to cfDNA were hematopoietic cells (80%) (Figure). More importantly, COVID-19 transplant patients showed 10 to 100 fold higher tissue specific cfDNA derived from monocyte, neutrophil, erythroblast, vascular endothelium, adipocyte, hepatocyte, kidney, heart and lung compared to controls. Analysis comparing cfDNA in transplant and non-transplant COVID-19 patients is on-going.

Conclusion

The allograft undergoes significant injury following COVID-19. Further, cfDNA from multiple tissue types is significantly higher in COVID-19 transplant patients. Future studies in a larger cohorts of transplant and non-transplant patients are needed to elucidate why transplant patients show worse COVID-19 outcomes.

Phase imaging with computational specificity (PICS) for measuring dry mass changes in sub-cellular compartments

Due to its specificity, fluorescence microscopy has become a quintessential imaging tool in cell biology. However, photobleaching, phototoxicity, and related artifacts continue to limit fluorescence microscopy's utility. Recently, it has been shown that artificial intelligence (AI) can transform one form of contrast into another. We present phase imaging with computational specificity (PICS), a combination of quantitative phase imaging and AI, which provides information about unlabeled live cells with high specificity. Our imaging system allows for automatic training, while inference is built into the acquisition software and runs in real-time. Applying the computed fluorescence maps back to the quantitative phase imaging (QPI) data, we measured the growth of both nuclei and cytoplasm independently, over many days, without loss of viability. Using a QPI method that suppresses multiple scattering, we measured the dry mass content of individual cell nuclei within spheroids. In its current implementation, PICS offers a versatile quantitative technique for continuous simultaneous monitoring of individual cellular components in biological applications where long-term label-free imaging is desirable.

Matrix Softness-Mediated 3D Zebrafish Hepatocyte Modulates Response to Endocrine Disrupting Chemicals

Endocrine disrupting chemicals (EDC) include synthetic compounds that mimic the structure or function of natural hormones. While most studies utilize live embryos or primary cells from adult fish, these cells rapidly lose functionality when cultured on plastic or glass substrates coated with extracellular matrix proteins. This study hypothesizes that the softness of a matrix with adhered fish cells can regulate the intercellular organization and physiological function of engineered hepatoids during EDC exposure. We scrutinized this hypothesis by culturing zebrafish hepatocytes (ZF-L) on collagen-based hydrogels with controlled elastic moduli by examining morphology, urea production, and intracellular oxidative stress of hepatoids exposed to 17β-estradiol. Interestingly, the softer gel drove cells to form a cell sheet with a canaliculi-like structure compared to its stiffer gel counterpart. The hepatoids cultured on the softer gel exhibited more active urea production upon exposure to 17β-estradiol and displayed faster recovery of intracellular reactive oxygen species level confirmed by gradient light interference microscopy (GLIM), a live-cell imaging technique. These results are broadly useful to improve screening and understanding of potential EDC impacts on aquatic organisms and human health.

Enhanced Condensation on Liquid-Infused Nanoporous Surfaces by Vibration-Assisted Droplet Sweeping

Condensation is a universal phenomenon that occurs in nature and industry. Previous studies have used superhydrophobicity and liquid infusion to enable superior liquid repellency due to reduced contact angle hysteresis. However, small condensate droplets remain immobile on condensing surfaces until they grow to the departing size at which the body force can overcome the contact line pinning force. Hence, condensation heat transfer is limited by these remaining droplets that act as thermal barriers. To break these limitations, we introduce vibrational actuation to a slippery liquid-infused nanoporous surface (SLIPS) and show enhanced droplet mobility, controllable condensate repellency, and more efficient heat transfer compared to static SLIPSs. We demonstrate 39% smaller departing droplet size and 8× faster droplet departing speeds on the dynamic vibrating SLIPS compared to the nonactuated SLIPS. To understand the implications of these behaviors on heat transfer, we investigate the condensate area coverage and droplet distribution to verify enhanced dewetting on dynamic vibrating SLIPSs. Using well-validated heat transfer models, we demonstrate enhanced condensation heat transfer on dynamic SLIPSs due to the higher population of smaller condensate droplets (<100 μm). In addition to condensation heat transfer, we also show that vibrating SLIPSs can enhance droplet collection. This work utilizes the synergistic combination of surface chemistry and mechanical actuation to realize enhanced droplet mobility and heat transfer in an electrically controllable and switchable manner.

Electrothermal soft manipulator enabling safe transport and handling of thin cell/tissue sheets and bioelectronic devices

"Living" cell sheets or bioelectronic chips have great potentials to improve the quality of diagnostics and therapies. However, handling these thin and delicate materials remains a grand challenge because the external force applied for gripping and releasing can easily deform or damage the materials. This study presents a soft manipulator that can manipulate and transport cell/tissue sheets and ultrathin wearable biosensing devices seamlessly by recapitulating how a cephalopod's suction cup works. The soft manipulator consists of an ultrafast thermo-responsive, microchanneled hydrogel layer with tissue-like softness and an electric heater layer. The electric current to the manipulator drives microchannels of the gel to shrink/expand and results in a pressure change through the microchannels. The manipulator can lift/detach an object within 10 s and can be used repeatedly over 50 times. This soft manipulator would be highly useful for safe and reliable assembly and implantation of therapeutic cell/tissue sheets and biosensing devices.

Preoperative vascular surgery model using a single polymer tough hydrogel with controllable elastic moduli

Materials used in organ mimics for medial simulation and education require tissue-like softness, toughness, and hydration to give clinicians and students accurate tactile feedback. However, there is a lack of materials that satisfy these requirements. Herein, we demonstrate that a stretchable and tough polyacrylamide hydrogel is useful to build organ mimics that match softness, crack growth resistance, and interstitial water of real organs. Varying the acrylamide concentration between 29 or 62% w/w with a molar ratio between cross-linker and acrylamide of 1 : 10 800 resulted in a fracture energy around ∼2000 J m^-2. More interestingly, this tough gel permitted variation of the elastic modulus from 8 to 62 kPa, which matches the softness of brain to vascular and muscle tissue. According to the rheological frequency sweep, the tough polyacrylamide hydrogels had a greatly decreased number of flow units, indicating that when deformed, stress was dispersed over a greater area. We propose that such molecular dissipation results from the increased number of entangled polymers between distant covalent cross-links. The gel was able to undergo various manipulations including stretching, puncture, delivery through a syringe tip, and suturing, thus enabling the use of the gel as a blood vessel model for microsurgery simulation.

Surface Tethering of Inflammation-Modulatory Nanostimulators to Stem Cells for Ischemic Muscle Repair

Stem cell transplantation has been a promising treatment for peripheral arterial diseases in the past decade. Stem cells act as living bioreactors of paracrine factors that orchestrate tissue regeneration. Prestimulated adipose-derived stem cells (ADSCs) have been proposed as potential candidates but have been met with challenges in activating their secretory activities for clinical use. Here, we propose that tethering the ADSC surface with nanoparticles releasing tumor necrosis factor α (TNFα), named nanostimulator, would stimulate cellular secretory activity in situ. We examined this hypothesis by complexing octadecylamine-grafted hyaluronic acid onto a liposomal carrier of TNFα. Hyaluronic acid increased the liposomal stability and association to CD44 on ADSC surface. ADSCs tethered with these TNFα carriers exhibited up-regulated secretion of proangiogenic vascular endothelial growth factor and immunomodulatory prosteoglandin E2 (PGE₂) while decreasing secretion of antiangiogenic pigment epithelium-derived factors. Accordingly, ADSCs tethered with nanostimulators promoted vascularization in a 3D microvascular chip and enhanced recovery of perfusion, walking, and muscle mass in a murine ischemic hindlimb compared to untreated ADSCs. We propose that this surface tethering strategy for in situ stimulation of stem cells would replace the costly and cumbersome preconditioning process and expedite clinical use of stem cells for improved treatments of various injuries and diseases.

[Establishment of animal model of bacterial microleakage at implant-abutment interface]

Objective: To study the bacterial microleakage at the interface between dental implant and abutment in rats. Methods: Under aseptic conditions, suspension of 0.25 μl of Porphyromonas gingivalis (Pg) (10(9) CFU/ml) was added into the customized implant. After the abutment was connected, the suspension was cultured in an Ep (eppendorf) tube containing 1 ml brain heart infusion (BHI) culture medium. After 7 days and 14 days, the liquid in the Ep tube was taken and inoculated, and the growth of bacteria was observed. Six male SD rats with 12 implants were divided into experimental group (4 implants), negative control group (4 implants) and blank control group (4 implants). All 6 rats had two implants implanted in their bilateral upper jaws. During the second operation, suspension of 0.25 μl Pg (10(9) CFU/ml) was added to the inner part of the implant of the experimental group, culture solution of 0.25 μl was added to the control group and nothing was added to the blank control group. The amount of Pg and total bacteria in each group were evaluated by quantitative real-time PCR (qPCR). The inflammatory cell infiltrate in the peri-implant mucosa was evaluated histomorphometrically. Results: The in vitro model directly verified the presence of bacterial microleakage at implant-abutment interface (IAI), and the animal model confirmed the existence of microleakage through the infiltrate of inflammatory cells near the micro-gap in the experimental group indirectly. In vitro experiments found that Pg had penetrated from the implant within a week by observation and culture. In animal study, the presence of 10(2)-10(4) Pg was detected in the experimental group and it was not detected in the negative control group and the blank control group. At the same time, under the light microscope, in the experimental group, there were inflammatory cells aggregation in the connective tissue around the micro-gap and the density of inflammatory cells gradually decreased from the micro-gap to coronal and the apical of the connective tissue, while there were only scattered inflammatory cells in the connective tissue around the blank control group and the negative control group. In the experimental group, inflammatory cells density in area of 0.25-0.50 mm, 0-0.25 mm coronal to the micro-gap and 0-0.25 mm, 0.25-0.50 mm apical to the mico-gap was respectively, 976 (655), 1 673 (1 245), 2 267 (819) and 895 (162) cells/mm(2),which was significantly more than the blank control group in the corresponding position [respectively 201 (180), 321 (351), 309 (236) and 218 (272) cells/mm(2)] (P<0.05). Conclusions: Pg in the dental implants of rats can be found in the microleakage through implant-abutment interface, and cause the soft tissue inflammation around the implant, and the inflammation has certain distribution characteristics.

Surface tethering of stromal cell-derived factor-1α carriers to stem cells enhances cell homing to ischemic muscle

Mesenchymal stem cells are promising medicine for treating diseases and tissue defects because of their innate ability to secrete therapeutic factors. Intravenous delivery of stem cells, although favored for its minimal invasiveness, is often plagued by low cellular engraftment in the target tissue. To this end, this study hypothesizes that in situ activation of cellular expression of CXC chemokine 4 (CXCR4) would significantly improve cellular migration to injured tissue. This hypothesis was examined by tethering the surface of stem cells with poly(D,L-lactide-co-glycolide)-block-hyaluronic acid (HA) particles containing stromal cell-derived factor-1α, a model chemokine to sensitize CXCR4. The HA blocks in the particles enhanced the association rate constant to stem cells by 3.3-fold, and in turn, increased the number of cells expressing CXCR4 receptors. Consequently, these cells displayed 1.2-fold higher transendothelial migration in vitro and 1.7-fold greater trafficking to the ischemic hindlimb of a mouse than that of the untethered cells.