Insights into metazoan evolution from Alvinella pompejana cDNAs

Background

Alvinella pompejana is a representative of Annelids, a key phylum for evo-devo studies that is still poorly studied at the sequence level. A. pompejana inhabits deep-sea hydrothermal vents and is currently known as one of the most thermotolerant Eukaryotes in marine environments, withstanding the largest known chemical and thermal ranges (from 5 to 105°C). This tube-dwelling worm forms dense colonies on the surface of hydrothermal chimneys and can withstand long periods of hypo/anoxia and long phases of exposure to hydrogen sulphides. A. pompejana specifically inhabits chimney walls of hydrothermal vents on the East Pacific Rise. To survive, Alvinella has developed numerous adaptations at the physiological and molecular levels, such as an increase in the thermostability of proteins and protein complexes. It represents an outstanding model organism for studying adaptation to harsh physicochemical conditions and for isolating stable macromolecules resistant to high temperatures.

Results

We have constructed four full length enriched cDNA libraries to investigate the biology and evolution of this intriguing animal. Analysis of more than 75,000 high quality reads led to the identification of 15,858 transcripts and 9,221 putative protein sequences. Our annotation reveals a good coverage of most animal pathways and networks with a prevalence of transcripts involved in oxidative stress resistance, detoxification, anti-bacterial defence, and heat shock protection. Alvinella proteins seem to show a slow evolutionary rate and a higher similarity with proteins from Vertebrates compared to proteins from Arthropods or Nematodes. Their composition shows enrichment in positively charged amino acids that might contribute to their thermostability. The gene content of Alvinella reveals that an important pool of genes previously considered to be specific to Deuterostomes were in fact already present in the last common ancestor of the Bilaterian animals, but have been secondarily lost in model invertebrates. This pool is enriched in glycoproteins that play a key role in intercellular communication, hormonal regulation and immunity.

Conclusions

Our study starts to unravel the gene content and sequence evolution of a deep-sea annelid, revealing key features in eukaryote adaptation to extreme environmental conditions and highlighting the proximity of Annelids and Vertebrates.

The structural biology and genomics platform in strasbourg: an overview

This chapter describes the modules and facilities of the Structural Biology and Genomics Platform (SBGP), Strasbourg, France. The platform consists of three modules (cloning, mini-expression screening; optimization-large scale protein production; characterization, crystallization) with dedicated scientists, and other facilities for purifying recombinant proteins and solving three-dimensional (3D) structures. Strong collaborations have been established with the Integrative Bioinformatics and Genomics group, located in the same institition, for target selection and domains definition. To handle large numbers of samples, classical and new protocols were adapted to automation, increasing reproducibility and reducing error risks as well. Using the platform and its facilities, over 2,000 expression vectors have been constructed and more than 40 novel structures, of mostly human proteins, have been solved.

A comparison of inoculation methods to simplify recombinant protein expression screening in Escherichia coli

In the past five years, Structural Genomics (SG) initiatives have established an automated pipeline for protein production in Escherichia coli to rapidly screen various conditions, resulting in soluble expression of recombinant proteins to aid in carrying out structural studies. However, some steps of the procedure are still extensive and require manual handling. Here, we present a comparative study of one step of the process, E. coli cultivation, using a set of 12 expression vectors encoding for fusion proteins of seven independent target proteins. First, we show that performing E. coli growth in auto-inducible medium (ZYM-5052) results in a comparable protein expression/solubility profile to that obtained when growing cells in classical Luria-Bertani (LB) medium. Second, we show that the transformation mix can be used directly to inoculate a culture, saving time and circumventing the error-prone step of colony picking, without impairing cell growth and the protein expression/solubility profile. Thus, we show that a basic, but nevertheless essential, step of a protein production pipeline, E. coli cultivation, can be simplified to a single event that is fully compatible with complete automation.

SPINE bioinformatics and data-management aspects of high-throughput structural biology

SPINE (Structural Proteomics In Europe) was established in 2002 as an integrated research project to develop new methods and technologies for high‐throughput structural biology. Development areas were broken down into workpackages and this article gives an overview of ongoing activity in the bioinformatics workpackage. Developments cover target selection, target registration, wet and dry laboratory data management and structure annotation as they pertain to high‐throughput studies. Some individual projects and developments are discussed in detail, while those that are covered elsewhere in this issue are treated more briefly. In particular, this overview focuses on the infrastructure of the software that allows the experimentalist to move projects through different areas that are crucial to high‐throughput studies, leading to the collation of large data sets which are managed and eventually archived and/or deposited.

First steps towards effective methods in exploiting high-throughput technologies for the determination of human protein structures of high biomedical value

The EC 'Structural Proteomics In Europe' contract is aimed specifically at the atomic resolution structure determination of human protein targets closely linked to health, with a focus on cancer (kinesins, kinases, proteins from the ubiquitin pathway), neurological development and neurodegenerative diseases and immune recognition. Despite the challenging nature of the analysis of such targets, approximately 170 structures have been determined to date. Here, the impact of high-throughput technologies, such as parallel expression of multiple constructs, the use of standardized refolding protocols and optimized crystallization screens or the use of mass spectrometry to assist sample preparation, on the structural biology of mammalian protein targets is illustrated through selected examples.

Structural genomics of eukaryotic targets at a laboratory scale

Structural genomics programs are distributed worldwide and funded by large institutions such as the NIH in United-States, the RIKEN in Japan or the European Commission through the SPINE network in Europe. Such initiatives, essentially managed by large consortia, led to technology and method developments at the different steps required to produce biological samples compatible with structural studies. Besides specific applications, method developments resulted mainly upon miniaturization and parallelization. The challenge that academic laboratories faces to pursue structural genomics programs is to produce, at a higher rate, protein samples. The Structural Biology and Genomics Department (IGBMC - Illkirch - France) is implicated in a structural genomics program of high eukaryotes whose goal is solving crystal structures of proteins and their complexes (including large complexes) related to human health and biotechnology. To achieve such a challenging goal, the Department has established a medium-throughput pipeline for producing protein samples suitable for structural biology studies. Here, we describe the setting up of our initiative from cloning to crystallization and we demonstrate that structural genomics may be manageable by academic laboratories by strategic investments in robotic and by adapting classical bench protocols and new developments, in particular in the field of protein expression, to parallelization.

DbW: automatic update of a functional family-specific multiple alignment

MOTIVATION

Recent advances in gene sequencing have provided complete sequence information for a number of genomes and as a result the amount of data in the sequence databases is growing at an exponential rate. We introduce here a new program, DbW, to automate the update of a functional family-specific multiple alignment that tries to include relevant sequences. The program is based on the use of different sources of information: sequences and annotations in databases.

RESULTS

The advantages of DbW are demonstrated using the 20 families of aminoacyl-tRNA synthetases, where DbW detects a maximum of homologous sequences in the Swiss-Prot and SPTREMBL databases. The global specificity of DbW in this test is 98.4% (1.6% of the sequences included in the alignment did not belong to the family according to their function), and the global sensitivity of DbW is estimated to be 95.2%. Thus, DbW provides a reliable basis for the many applications that rely on accurate multiple alignments, e.g. functional residue identification, 2D/3D structure prediction or homology modeling.

AVAILABILITY

The DbW software is available for download at ftp://ftp-igbmc.u-strasbg.fr/pub/DbW/DbW.tar and online at http://titus.u-strasbg.fr/DbW CONTACT: prigent@igbmc.u-strasbg.fr.

TFIIH contains a PH domain involved in DNA nucleotide excision repair

The human general transcription factor TFIIH is involved in both transcription and DNA repair. We have identified a structural domain in the core subunit of TFIIH, p62, which is absolutely required for DNA repair activity through the nucleotide excision repair pathway. Using coimmunoprecipitation experiments, we showed that this activity involves the interaction between the N-terminal domain of p62 and the 3' endonuclease XPG, a major component of the nucleotide excision repair machinery. Furthermore, we reconstituted a functional TFIIH particle with a mutant of p62 lacking the N-terminal domain, showing that this domain is not required for assembly of the TFIIH complex and basal transcription. We solved its three-dimensional structure and found an unpredicted pleckstrin homology and phosphotyrosine binding (PH/PTB) domain, uncovering a new class of activity for this fold.

PipeAlign: A new toolkit for protein family analysis

PipeAlign is a protein family analysis tool integrating a five step process ranging from the search for sequence homologues in protein and 3D structure databases to the definition of the hierarchical relationships within and between subfamilies. The complete, automatic pipeline takes a single sequence or a set of sequences as input and constructs a high-quality, validated MACS (multiple alignment of complete sequences) in which sequences are clustered into potential functional subgroups. For the more experienced user, the PipeAlign server also provides numerous options to run only a part of the analysis, with the possibility to modify the default parameters of each software module. For example, the user can choose to enter an existing multiple sequence alignment for refinement, validation and subsequent clustering of the sequences. The aim is to provide an interactive workbench for the validation, integration and presentation of a protein family, not only at the sequence level, but also at the structural and functional levels. PipeAlign is available at http://igbmc.u-strasbg.fr/PipeAlign/.

RASCAL: rapid scanning and correction of multiple sequence alignments

MOTIVATION

Most multiple sequence alignment programs use heuristics that sometimes introduce errors into the alignment. The most commonly used methods to correct these errors use iterative techniques to maximize an objective function. We present here an alternative, knowledge-based approach that combines a number of recently developed methods into a two-step refinement process. The alignment is divided horizontally and vertically to form a 'lattice' in which well aligned regions can be differentiated. Alignment correction is then restricted to the less reliable regions, leading to a more reliable and efficient refinement strategy.

RESULTS

The accuracy and reliability of RASCAL is demonstrated using: (i) alignments from the BAliBASE benchmark database, where significant improvements were often observed, with no deterioration of the existing high-quality regions, (ii) a large scale study involving 946 alignments from the ProDom protein domain database, where alignment quality was increased in 68% of the cases; and (iii) an automatic pipeline to obtain a high-quality alignment of 695 full-length nuclear receptor proteins, which took 11 min on a DEC Alpha 6100 computer

AVAILABILITY

RASCAL is available at ftp://ftp-igbmc.u-strasbg.fr/pub/RASCAL.

SUPPLEMENTARY INFORMATION

http://bioinfo-igbmc.u-strasbourg.fr/BioInfo/RASCAL/paper/rascal_supp.html

An integrated analysis of the genome of the hyperthermophilic archaeon Pyrococcus abyssi

The hyperthermophilic euryarchaeon Pyrococcus abyssi and the related species Pyrococcus furiosus and Pyrococcus horikoshii, whose genomes have been completely sequenced, are presently used as model organisms in different laboratories to study archaeal DNA replication and gene expression and to develop genetic tools for hyperthermophiles. We have performed an extensive re-annotation of the genome of P. abyssi to obtain an integrated view of its phylogeny, molecular biology and physiology. Many new functions are predicted for both informational and operational proteins. Moreover, several candidate genes have been identified that might encode missing links in key metabolic pathways, some of which have unique biochemical features. The great majority of Pyrococcus proteins are typical archaeal proteins and their phylogenetic pattern agrees with its position near the root of the archaeal tree. However, proteins probably from bacterial origin, including some from mesophilic bacteria, are also present in the P. abyssi genome.

Comparative analysis of ribosomal proteins in complete genomes: an example of reductive evolution at the domain scale

A comprehensive investigation of ribosomal genes in complete genomes from 66 different species allows us to address the distribution of r-proteins between and within the three primary domains. Thirty-four r-protein families are represented in all domains but 33 families are specific to Archaea and Eucarya, providing evidence for specialisation at an early stage of evolution between the bacterial lineage and the lineage leading to Archaea and Eukaryotes. With only one specific r-protein, the archaeal ribosome appears to be a small-scale model of the eukaryotic one in terms of protein composition. However, the mechanism of evolution of the protein component of the ribosome appears dramatically different in Archaea. In Bacteria and Eucarya, a restricted number of ribosomal genes can be lost with a bias toward losses in intracellular pathogens. In Archaea, losses implicate 15% of the ribosomal genes revealing an unexpected plasticity of the translation apparatus and the pattern of gene losses indicates a progressive elimination of ribosomal genes in the course of archaeal evolution. This first documented case of reductive evolution at the domain scale provides a new framework for discussing the shape of the universal tree of life and the selective forces directing the evolution of prokaryotes.

Towards a reliable objective function for multiple sequence alignments

Multiple sequence alignment is a fundamental tool in a number of different domains in modern molecular biology, including functional and evolutionary studies of a protein family. Multiple alignments also play an essential role in the new integrated systems for genome annotation and analysis. Thus, the development of new multiple alignment scores and statistics is essential, in the spirit of the work dedicated to the evaluation of pairwise sequence alignments for database searching techniques. We present here norMD, a new objective scoring function for multiple sequence alignments. NorMD combines the advantages of the column-scoring techniques with the sensitivity of methods incorporating residue similarity scores. In addition, norMD incorporates ab initio sequence information, such as the number, length and similarity of the sequences to be aligned. The sensitivity and reliability of the norMD objective function is demonstrated using structural alignments in the SCOP and BAliBASE databases. The norMD scores are then applied to the multiple alignments of the complete sequences (MACS) detected by BlastP with E-value<10, for a set of 734 hypothetical proteins encoded by the Vibrio cholerae genome. Unrelated or badly aligned sequences were automatically removed from the MACS, leaving a high-quality multiple alignment which could be reliably exploited in a subsequent functional and/or structural annotation process. After removal of unreliable sequences, 176 (24 %) of the alignments contained at least one sequence with a functional annotation. 103 of these new matches were supported by significant hits to the Interpro domain and motif database.

Secator: a program for inferring protein subfamilies from phylogenetic trees

With the huge increase of protein data, an important problem is to estimate, within a large protein family, the number of sensible subsets for subsequent in-depth structural, functional, and evolutionary analyses. To tackle this problem, we developed a new program, Secator, which implements the principle of an ascending hierarchical method using a distance matrix based on a multiple alignment of protein sequences. Dissimilarity values assigned to the nodes of a deduced phylogenetic tree are partitioned by a new stopping rule introduced to automatically determine the significant dissimilarity values. The quality of the clusters obtained by Secator is verified by a separate Jackknife study. The method is demonstrated on 24 large protein families covering a wide spectrum of structural and sequence conservation and its usefulness and accuracy with real biological data is illustrated on two well-studied protein families (the Sm proteins and the nuclear receptors).

Genome evolution at the genus level: comparison of three complete genomes of hyperthermophilic archaea

We have compared three complete genomes of closely related hyperthermophilic species of Archaea belonging to the Pyrococcus genus: Pyrococcus abyssi, Pyrococcus horikoshii, and Pyrococcus furiosus. At the genomic level, the comparison reveals a differential conservation among four regions of the Pyrococcus chromosomes correlated with the location of genetic elements mediating DNA reorganization. This discloses the relative contribution of the major mechanisms that promote genomic plasticity in these Archaea, namely rearrangements linked to the replication terminus, insertion sequence-mediated recombinations, and DNA integration within tRNA genes. The combination of these mechanisms leads to a high level of genomic plasticity in these hyperthermophilic Archaea, at least comparable to the plasticity observed between closely related bacteria. At the proteomic level, the comparison of the three Pyrococcus species sheds light on specific selection pressures acting both on their coding capacities and evolutionary rates. Indeed, thanks to two independent methods, the "reciprocal best hits" approach and a new distance ratio analysis, we detect the false orthology relationships within the Pyrococcus lineage. This reveals a high amount of differential gains and losses of genes since the divergence of the three closely related species. The resulting polymorphism is probably linked to an adaptation of these free-living organisms to differential environmental constraints. As a corollary, we delineate the set of orthologous genes shared by the three species, that is, the genes that may characterize the Pyrococcus genus. In this conserved core, the amino acid substitution rate is equal between P. abyssi and P. horikoshii for most of their shared proteins, even for fast-evolving ones. In contrast, strong discrepancies exist among the substitution rates observed in P. furiosus relative to the two other species, which is in disagreement with the molecular clock hypothesis.

Genome Evolution at the Genus Level: Comparison of Three Complete Genomes of Hyperthermophilic Archaea

We have compared three complete genomes of closely related hyperthermophilic species of Archaea belonging to thePyrococcus genus: Pyrococcus abyssi, Pyrococcus horikoshii, and Pyrococcus furiosus. At the genomic level, the comparison reveals a differential conservation among four regions of the Pyrococcus chromosomes correlated with the location of genetic elements mediating DNA reorganization. This discloses the relative contribution of the major mechanisms that promote genomic plasticity in these Archaea, namely rearrangements linked to the replication terminus, insertion sequence-mediated recombinations, and DNA integration within tRNA genes. The combination of these mechanisms leads to a high level of genomic plasticity in these hyperthermophilic Archaea, at least comparable to the plasticity observed between closely related bacteria. At the proteomic level, the comparison of the threePyrococcus species sheds light on specific selection pressures acting both on their coding capacities and evolutionary rates. Indeed, thanks to two independent methods, the “reciprocal best hits“ approach and a new distance ratio analysis, we detect the false orthology relationships within the Pyrococcus lineage. This reveals a high amount of differential gains and losses of genes since the divergence of the three closely related species. The resulting polymorphism is probably linked to an adaptation of these free-living organisms to differential environmental constraints. As a corollary, we delineate the set of orthologous genes shared by the three species, that is, the genes that may characterize the Pyrococcus genus. In this conserved core, the amino acid substitution rate is equal between P. abyssi and P. horikoshii for most of their shared proteins, even for fast-evolving ones. In contrast, strong discrepancies exist among the substitution rates observed in P. furiosus relative to the two other species, which is in disagreement with the molecular clock hypothesis.

Solution structure of the N-terminal domain of the human TFIIH MAT1 subunit: new insights into the RING finger family

The human MAT1 protein belongs to the cyclin-dependent kinase-activating kinase complex, which is functionally associated to the transcription/DNA repair factor TFIIH. The N-terminal region of MAT1 consists of a C3HC4 RING finger, which contributes to optimal TFIIH transcriptional activities. We report here the solution structure of the human MAT1 RING finger domain (Met(1)-Asp(65)) as determined by (1)H NMR spectroscopy. The MAT1 RING finger domain presents the expected betaalphabetabeta topology with two interleaved zinc-binding sites conserved among the RING family. However, the presence of an additional helical segment in the N-terminal part of the domain and a conserved hydrophobic central beta strand are the defining features of this new structure and more generally of the MAT1 RING finger subfamily. Comparison of electrostatic surfaces of RING finger structures shows that the RING finger domain of MAT1 presents a remarkable positively charged surface. The functional implications of these MAT1 RING finger features are discussed.

BAliBASE (Benchmark Alignment dataBASE): enhancements for repeats, transmembrane sequences and circular permutations

BAliBASE is specifically designed to serve as an evaluation resource to address all the problems encountered when aligning complete sequences. The database contains high quality, manually constructed multiple sequence alignments together with detailed annotations. The alignments are all based on three-dimensional structural superpositions, with the exception of the transmembrane sequences. The first release provided sets of reference alignments dealing with the problems of high variability, unequal repartition and large N/C-terminal extensions and internal insertions. Here we describe version 2.0 of the database, which incorporates three new reference sets of alignments containing structural repeats, trans-membrane sequences and circular permutations to evaluate the accuracy of detection/prediction and alignment of these complex sequences. BAliBASE can be viewed at the web site http://www-igbmc.u-strasbg. fr/BioInfo/BAliBASE2/index.html or can be downloaded from ftp://ftp-igbmc.u-strasbg.fr/pub/BAliBASE2 /.

Characterization of crystal content by ESI-MS and MALDI-MS

A general approach based on mass spectrometry is described for the rapid identification of the content of macromolecular crystals. The experimental procedure was established using lysozyme crystals and then successfully applied to various systems containing specifically bound molecules not easily detectable by other classical techniques. This procedure can be carried out on crystals containing macromolecules of a different nature, such as proteins, nucleic acids and small organic molecules and their non-covalent complexes, grown under various crystallization conditions including PEGs and salts. It can be applied very early on in the crystallization process - as soon as the crystals can be handled. It allows the biologist to control precisely the sequence integrity and homogeneity of the crystallized proteins (in particular at the C-terminus) as well as to verify whether the protein has crystallized with all its expected partners or ligands (nucleic acid molecules, cofactor or small organic molecules).

Structural characterization of the cysteine-rich domain of TFIIH p44 subunit

In an effort to understand the structure function relationship of TFIIH, a transcription/repair factor, we focused our attention on the p44 subunit, which plays a central role in both mechanisms. The amino-terminal portion of p44 has been shown to be involved in the regulation of the XPD helicase activity; here we show that its carboxyl-terminal domain is essential for TFIIH transcription activity and that it binds three zinc atoms through two independent modules. The first contains a C4 zinc finger motif, whereas the second is characterized by a CX(2)CX(2-4)FCADCD motif, corresponding to interleaved zinc binding sites. The solution structure of this second module reveals an unexpected homology with the regulatory domain of protein kinase C and provides a framework to study its role at the molecular level.

Synthesis of aspartyl-tRNA(Asp) in Escherichia coli--a snapshot of the second step

The 2.4 A crystal structure of the Escherichia coli aspartyl-tRNA synthetase (AspRS)-tRNA(Asp)-aspartyl-adenylate complex shows the two substrates poised for the transfer of the aspartic acid moiety from the adenylate to the 3'-hydroxyl of the terminal adenosine of the tRNA. A general molecular mechanism is proposed for the second step of the aspartylation reaction that accounts for the observed conformational changes, notably in the active site pocket. The stabilization of the transition state is mediated essentially by two amino acids: the class II invariant arginine of motif 2 and the eubacterial-specific Gln231, which in eukaryotes and archaea is replaced by a structurally non-homologous serine. Two archetypal RNA-protein modes of interactions are observed: the anticodon stem-loop, including the wobble base Q, binds to the N-terminal beta-barrel domain through direct protein-RNA interactions, while the binding of the acceptor stem involves both direct and water-mediated hydrogen bonds in an original recognition scheme.

Crystals of Thermus thermophilus tRNAAsp complexed with its cognate aspartyl-tRNA synthetase have a solvent content of 75%. Comparison with other aminoacylation systems

Thermus thermophilus tRNAAsp, purified from a non-recombinant source, has been crystallized in a complex with its cognate dimeric (alpha2) aspartyl-tRNA synthetase. Crystals diffract to 2.9 A resolution and belong to space group P63 with cell parameters a = b = 258, c = 90.9 A. The crystals contain one aspartyl-tRNA synthetase dimer and two tRNA molecules in the asymmetric unit, corresponding to a Vm of 4.85 A3 Da-1 and 75% solvent content. When compared with those obtained for globular proteins these values are high, but fall within the range observed for other aminoacyl-tRNA synthetases, either free or complexed with their tRNAs. A comparative survey is presented here.

Crystal structure of aspartyl-tRNA synthetase from Pyrococcus kodakaraensis KOD: archaeon specificity and catalytic mechanism of adenylate formation

The crystal structure of aspartyl-tRNA synthetase (AspRS) from Pyrococcus kodakaraensis was solved at 1.9 A resolution. The sequence and three-dimensional structure of the catalytic domain are highly homologous to those of eukaryotic AspRSs. In contrast, the N-terminal domain, whose function is to bind the tRNA anticodon, is more similar to that of eubacterial enzymes. Its structure explains the unique property of archaeal AspRSs of accommodating both tRNAAsp and tRNAAsn. Soaking the apo-enzyme crystals with ATP and aspartic acid both separately and together allows the adenylate formation to be followed. Due to the asymmetry of the dimeric enzyme in the crystalline state, different steps of the reaction could be visualized within the same crystal. Four different states of the aspartic acid activation reaction could thus be characterized, revealing the functional correlation of the observed conformational changes. The binding of the amino acid substrate induces movement of two invariant loops which secure the position of the peptidyl moiety for adenylate formation. An unambiguous spatial and functional assignment of three magnesium ion cofactors can be made. This study shows the important role of residues present in both archaeal and eukaryotic AspRSs, but absent from the eubacterial enzymes.

The structure of cyclin H: common mode of kinase activation and specific features

The crystal structure of human cyclin H refined at 2.6 A resolution is compared with that of cyclin A. The core of the molecule consists of two repeats containing five helices each and forming the canonical cyclin fold also observed in TFIIB. One hundred and thirty-two out of the 217 C alpha atoms from the cyclin fold can be superposed with a root-mean-square difference of 1.8 A. The structural homology is even higher for the residues at the interface with the kinase, which is of functional significance, as shown by our observation that cyclin H binds to cyclin-dependent kinase 2 (cdk2) and that cyclin A is able to activate cdk7 in the presence of MAT1. Based on this superposition, a new signature sequence for cyclins was found. The specificity of the cyclin H molecule is provided mainly by two long helices which extend the cyclin fold at its N- and C-termini and pack together against the first repeat on the side opposite to the kinase. Deletion mutants show that the terminal helices are required for a functionally active cyclin H.

Expression in Escherichia coli: purification and characterization of cyclin H, a subunit of the human general transcription/DNA repair factor TFIIH

The human cyclin H, a protein normally associated with the cyclin-dependent kinase cdk7, was overexpressed in Escherichia coli using a T7 RNA polymerase expression system and further purified to apparent homogeneity. The purified recombinant cyclin H is similar to the endogenous one according to the following criteria: molecular weight, microsequencing and mass spectra studies, ability to interact with cdk7, and regulatory kinase activity. The scale-up of cyclin H purification is described.

The crystal structure of human cyclin H

The crystal structure of human cyclin H has been solved at 2.6 A resolution by the MIR method and refined to an R-factor of 23.1%. The core of the molecule consists of two helical repeats adopting the canonical cyclin fold already observed in the structures of cyclin A [Brown et al. (1995) Structure 3, 1235-1247; Jeffrey et al. (1995) Nature 376, 313-320; Russo et al. (1996) Nature 382, 325-331] and TFIIB [Nikoilov et al. (1995) Nature 377, 119-128]. The N-terminal and C-terminal residues form a new domain built on two long helices interacting essentially with the first repeat of the molecule.

Crystallization of Escherichia coli aspartyl-tRNA synthetase in its free state and in a complex with yeast tRNAAsp

Overexpressed dimeric E. coli aspartyl-tRNA synthetase (AspRS) has been crystallized in its free state and complexed with yeast tRNA(Asp). Triclinic crystals of the enzyme alone (a = 104.4, b = 107.4, c = 135.0 A, alpha = 102.9, beta = 101.0, gamma = 106.3 degrees ), have been grown using ammonium sulfate as the precipitant and monoclinic crystals (a = 127.1, b = 163.6, c = 140.1 A, beta = 111.7 degrees ), space group C2, have been grown using polyethylene glycol 6000. They diffract to 2.8 and 3.0 A, respectively. Crystals of the heterologous complex between E. coli AspRS and yeast tRNA have been obtained using ammonium sulfate as the precipitant and 2-propanol as the nucleation agent. They belong to the monoclinic space group P2(1) (a = 76.2, b = 227.3, c = 82.3 A, beta = 111.7 degrees ) and diffract to 2.7 A.

The class II aminoacyl-tRNA synthetases and their active site: evolutionary conservation of an ATP binding site

Previous sequence analyses have suggested the existence of two distinct classes of aminoacyl-tRNA synthetase. The partition was established on the basis of exclusive sets of sequence motifs (Eriani et al. [1990] Nature 347:203-306). X-ray studies have now well defined the structural basis of the two classes: the class I enzymes share with dehydrogenases and kinases the classic nucleotide binding fold called the Rossmann fold, whereas the class II enzymes possess a different fold, not found elsewhere, built around a six-stranded antiparallel beta-sheet. The two classes of synthetases catalyze the same global reaction that is the attachment of an amino acid to the tRNA, but differ as to where on the terminal adenosine of the tRNA the amino acid is placed: class I enzymes act on the 2' hydroxyl whereas the class II enzymes prefer the 3' hydroxyl group. The three-dimensional structure of aspartyl-tRNA synthetase from yeast, a typical class II enzyme, is described here, in relation to its function. The crucial role of the sequence motifs in substrate binding and enzyme structure is high-lighted. Overall these results underline the existence of an intimate evolutionary link between the aminoacyl-tRNA synthetases, despite their actual structural diversity.

Electrostatic potential in aminoacylation by aspartyl-tRNAs synthetase

Based upon the X-ray structures of complexes between tRNAAsp and aspRS including ATP or Asp-AMP, several electrostatic potentials were calculated by solving the Poisson-Boltzmann equation. The potentials indicate clearly that a Mg2+ ion is essential for binding of ATP and that aspartate is identified electrostatically. The alpha-carboxyl group is forced to contact with the alpha-phosphorus atom of ATP, suggesting its inversion to form an Asp-AMP. When the cognate tRNA is bound to the aspRS:Asp-AMP complex, the 3'-hydroxyl group is located in an electrostatically favorable position to transfer the amino acid as a class II aminoacylation.

Synthesis and recognition of aspartyl-adenylate by Thermus thermophilus aspartyl-tRNA synthetase

The crystal structures of Thermus thermophilus aspartyl-tRNA synthetase and of its complex with ATP, Mg2+ and aspartic acid, show in situ formation of the amino acid adenylate and furnish experimental evidence for the modes of recognition of aspartic acid and ATP. The amino acid fits in a predefined specific site in which it replaces water molecules without significant conformational changes of the binding residues. This mode of selection is reminiscent of the lock and key concept. The pocket is closed by the movement of a histidine side chain from a neighbouring loop acting as a valve. ATP binding is driven by the stacking of the adenine upon the otherwise fixed aromatic ring of the class-II-invariant phenylalanine Phe235. Specific recognition is achieved by interactions with the flexible side chains of other class-II-conserved residues. Conformational changes have been identified which allow the description of a reaction pathway including both lock-and-key and induced-fit interactions. This pathway can presumably be extended to all class II aaRS.

Conformational polymorphism of cyclosporin A

BACKGROUND

Cyclosporin A (CsA) is a cyclic undecapeptide fungal metabolite with immunosuppressive properties, widely used in transplant surgery. It forms a tight complex with the ubiquitous 18 kDa cytosolic protein cyclophilin A (CypA). The conformation of CsA in this complex, as studied by NMR or X-ray crystallography, is very different from that of free CsA. Another, different conformation of CsA has been found in a complex with an antibody fragment (Fab).

RESULTS

A detailed comparison of the conformations of experimentally determined structures of protein-bound CsA is presented. The X-ray and NMR structures of CsA-CypA complexes are similar. The Fab-bound conformation of CsA, as determined by X-ray crystallography, is significantly different from the cyclophilin-bound conformation. The protein-CsA interactions in both the Fab and CypA complexes involve five hydrogen bonds, and the buried CsA surface areas are 395 A2 and 300 A2, respectively. However, the CsA-protein interactions involve rather different side chain contacts in the two complexes.

CONCLUSIONS

The structural results presented here are consistent with CypA recognizing and binding a population of CsA molecules which are in the required CypA-binding conformation. In contrast, the X-ray structures of the Fab complex with CsA suggest that in this case there is mutual adaptation of both receptor and ligand during complex formation.

Crystal structure of a prokaryotic aspartyl tRNA-synthetase

The crystal structure of Thermus thermophilus aspartyl tRNA-synthetase (AspRS) refined at 2.5 A resolution is described. This molecular structure is a textbook illustration of the modular organization of aminoacyl-tRNA synthetases. In addition to the three domains found in yeast AspRS, each monomer exhibits a module specific to prokaryotic enzymes, which corresponds to a helix-turn-helix motif in yeast AspRS, a domain implicated in the stabilization of the complex with tRNA. Its topology matches that of the histidine-containing phosphocarrier HPr which has been linked recently to another group of proteins containing the ferredoxin fold. We propose a more extensive alignment of these folds, which involves a circular permutation of the sequences and changes the point of entry of the whole domain. The C-terminal extension, another prokaryotic characteristic, leads to a significant increase in the network of interaction at the dimer interface. Some potential communication pathways suggest how a transfer of information between the two active sites of the homodimer might occur. Most of the residues involved belong to the class II-specific motifs in correlation with the dimeric state of nearly all class II enzymes. The T. thermophilus enzyme exhibits some features not found in any of the six other known AspRSs from mesophilic organisms.

The active site of yeast aspartyl-tRNA synthetase: structural and functional aspects of the aminoacylation reaction

The crystal structures of the various complexes formed by yeast aspartyl-tRNA synthetase (AspRS) and its substrates provide snapshots of the active site corresponding to different steps of the aminoacylation reaction. Native crystals of the binary complex tRNA-AspRS were soaked in solutions containing the two other substrates, ATP (or its analog AMPPcP) and aspartic acid. When all substrates are present in the crystal, this leads to the formation of the aspartyl-adenylate and/or the aspartyl-tRNA. A class II-specific pathway for the aminoacylation reaction is proposed which explains the known functional differences between the two classes while preserving a common framework. Extended signature sequences characteristic of class II aaRS (motifs 2 and 3) constitute the basic functional unit. The ATP molecule adopts a bent conformation, stabilized by the invariant Arg531 of motif 3 and a magnesium ion coordinated to the pyrophosphate group and to two class-invariant acidic residues. The aspartic acid substrate is positioned by a class II invariant acidic residue, Asp342, interacting with the amino group and by amino acids conserved in the aspartyl synthetase family. The amino acids in contact with the substrates have been probed by site-directed mutagenesis for their functional implication.

Crystallographic analysis of the interaction between cyclosporin A and the Fab fragment of a monoclonal antibody

The structure of the complex between cyclosporin A and the Fab fragment of a monoclonal antibody has been established by crystallographic analysis to 2.65 A resolution. The structure has been solved by molecular replacement using a composite Fab model. The current R-factor after refinement is 0.179 between 8 and 2.65 A resolution. The antibody is one among three known structures with long H3 loops. This loop conformation is observed for the first time in the presence of the antigen. Residues from all six hypervariable loops interact with cyclosporin A. However, the 17 residues long loop H3 is the main contributor to the buried combining site area and to the van der Waals contacts made with cyclosporin A, with 52 and 63%, respectively, of the total contribution.

Yeast tRNA(Asp) recognition by its cognate class II aminoacyl-tRNA synthetase

Aminoacyl-RNA synthetases can be divided into two classes according to structural features inferred from sequence alignments. This classification correlates almost perfectly with the attachment of the amino acid to the 2'-OH (class I) or 3'-OH (class II) group of the terminal adenosine. Six subgroups of higher homology can be inferred from sequence analysis. The five aminoacyl-tRNA synthetases whose crystal structures are known (MetRS, TyrRS and GlnRS in class I, SerRS and AspRS in class II) belong to different subgroups. Two of them, GlnRS and AspRS, have been cocrystallized with their cognate tRNA. AspRS, like six other members of class II, is an alpha 2 dimer. Yeast tRNA(Asp) exhibits five identity determinants: the three anticodon bases, the discriminator base G73 and the base pair G10-U25. We report here that the refined crystal structure of AspRS complexed with tRNA(Asp) at 2.9 A resolution reveals three regions of contact, each involving a domain of AspRS and at least one identity determinant of tRNA(Asp). The mode of binding of the acceptor stem of tRNA(Asp) by AspRS can be generalized to class II aminoacyl-tRNA synthetases, whereas the deciphering of the anticodon, which involves a large conformational change of the loop and the formation of a bulge, is more specific to the aspartic system.

Yeast aspartyl-tRNA synthetase: a structural view of the aminoacylation reaction

The refinement of the crystal structure of a binary complex formed by yeast AspRS and tRNA(Asp) provided a detailed understanding of the recognition of tRNA by an aminoacyl-tRNA synthetase. The crystal structures of several complexes containing ATP, alone or with aspartic acid, were also determined and refined. These studies led to a complete description of the active site of the enzyme and to the elucidation of the location and interactions of the various substrates. Based on these structural results, a class II-specific pathway for the aminoacylation reaction can be proposed.

Three-dimensional structure of phenylalanyl-transfer RNA synthetase from Thermus thermophilus HB8 at 0.6-nm resolution

The three-dimensional structure of the heterodimeric alpha 2 beta 2 enzyme phenylalanyl-tRNA synthetase from Thermus thermophilus HB8 has been determined by X-ray crystallography, using the multiple-isomorphous-replacement method at 0.6 nm resolution. Trigonal crystals of space group P3(2)21 have cell dimensions a = b = 17.6 nm and c = 14.2 nm. Assuming one heterodimeric molecule/asymmetric unit, the ratio of unit cell volume/molecular mass was V = 0.00244 nm3/Da, which is in the middle of the range normally observed. However, after a rotation-function calculation and measurement of the density of the native crystals, we postulate the existence of only the alpha beta dimer in the asymmetric units. This implies 73% solvent content in the unit cell. Three heavy-atom derivatives [K2PtCl4, KAu(CN)2 and Hg(CH3COO)2] and the solvent-flattening procedure were used for electron-density-map calculations. This map confirmed our hypothesis and revealed a remarkably large space filled by solvent, with alpha beta dimer only in the asymmetric unit. The phenylalanyl-tRNA synthetase from T. thermophilus molecule has a 'quasi-linear' subunit organization. As can be concluded at this level of resolution, there is no contact between small alpha subunits in the functional heterodimer.

Crystallization of aspartyl-tRNA synthetase-tRNA(Asp) complex from Escherichia coli and first crystallographic results

Crystals of the dimeric aspartyl-tRNA synthetase from Escherichia coli (molecular mass 132,000 Da) complexed with its cognate tRNA (molecular mass 25,000 Da) have been grown using ammonium sulfate as precipitant. The crystals belong to the orthorhombic space group C222(1) with unit cell parameters a = 102.75 A, b = 128.11 A, c = 231.70 A and diffract to 3 A. The asymmetric unit contains one monomer of the aspartyl-tRNA synthetase and one tRNA molecule.

A conformation of cyclosporin A in aqueous environment revealed by the X-ray structure of a cyclosporin-Fab complex

The conformation of the immunosuppressive drug cyclosporin A (CsA) in a complex with a Fab molecule has been established by crystallographic analysis to 2.65 angstrom resolution. This conformation of CsA is similar to that recently observed in the complex with the rotamase cyclophilin, its binding protein in vivo, and totally different from its conformation in an isolated form as determined from x-ray and nuclear magnetic resonance analysis. Because the surfaces of CsA interacting with cyclophilin or with the Fab are not identical, these results suggest that the conformation of CsA observed in the bound form preexists in aqueous solution and is not produced by interaction with the proteins.

Class II aminoacyl transfer RNA synthetases: crystal structure of yeast aspartyl-tRNA synthetase complexed with tRNA(Asp)

The crystal structure of the binary complex tRNA(Asp)-aspartyl tRNA synthetase from yeast was solved with the use of multiple isomorphous replacement to 3 angstrom resolution. The dimeric synthetase, a member of class II aminoacyl tRNA synthetases (aaRS's) exhibits the characteristic signature motifs conserved in eight aaRS's. These three sequence motifs are contained in the catalytic site domain, built around an antiparallel beta sheet, and flanked by three alpha helices that form the pocket in which adenosine triphosphate (ATP) and the CCA end of tRNA bind. The tRNA(Asp) molecule approaches the synthetase from the variable loop side. The two major contact areas are with the acceptor end and the anticodon stem and loop. In both sites the protein interacts with the tRNA from the major groove side. The correlation between aaRS class II and the initial site of aminoacylation at 3'-OH can be explained by the structure. The molecular association leads to the following features: (i) the backbone of the GCCA single-stranded portion of the acceptor end exhibits a regular helical conformation; (ii) the loop between residues 320 and 342 in motif 2 interacts with the acceptor stem in the major groove and is in contact with the discriminator base G and the first base pair UA; and (iii) the anticodon loop undergoes a large conformational change in order to bind the protein. The conformation of the tRNA molecule in the complex is dictated more by the interaction with the protein than by its own sequence.

Preliminary X-ray investigation of 70 S ribosome crystals from Thermus thermophilus

Large three-dimensional crystals of 70 S from Thermus thermophilus have been grown from solutions of 2-methyl-2,4-pentanediol at 4 degrees C and examined in an X-ray synchrotron beam. The space group is P4(1)2(1)2 or P4(3)2(1)2 with unit cell dimensions of a = 510 A and c = 378 A. The diffraction patterns extend to better than 20 A.

Crystallization and preliminary X-ray investigation of a complex between a Fab fragment and its antigen, cyclosporin

Preliminary crystallographic data are given for a complex between the cyclic undecapeptide cyclosporin and the Fab fragment of an anti-cyclosporin monoclonal antibody. Crystals of the complex are orthorhombic with space group P2(1)2(1)2(1) and diffract to 2.7 A resolution. The unit cell dimensions are a = 52.6 A, b = 70.2 A and c = 118.4 A. A native data set to 2.7 A resolution has been collected.

A high resolution diffracting crystal form of the complex between yeast tRNAAsp and aspartyl-tRNA synthetase

Three new crystal forms of the complex between yeast tRNAAsp and aspartyl-tRNA synthetase have been produced. The best crystals, obtained after modifying both purification and crystallization conditions, belong to space group P2(1)2(1)2(1) and diffract to 2.7 A. Unit cell parameters are a = 210.4 A, b = 145.3 A and c = 86.0 A (1 A = 0.1 nm), with one dimeric enzyme and two tRNA molecules in the asymmetric unit.

Yeast tRNA(Asp)-aspartyl-tRNA synthetase complex: low resolution crystal structure

Yeast aspartyl-tRNA synthetase, a dimer of molecular weight 125,000, and two molecules of its cognate tRNA (Mr = 24160) cocrystallize in the cubic space group I432 (a = 354 A). The crystal structure was solved to low resolution using neutron and X-ray diffraction data. Neutron single crystal diffraction data were collected in five solvents differing by their D2O content in order to use the contrast variation method to distinguish between the protein and tRNA. The synthetase was first located at 40 A resolution using the 65% D2O neutron data (tRNA matched) tRNA molecules were found at 20 A resolution using both neutron and X-ray data. The resulting model was refined against 10 A resolution X-ray data, using density modification and least-squares refinement of the tRNA positions. The crystal structure solved without a priori phase knowledge, was confirmed later by isomorphous replacement. The molecular model of the complex is in good agreement with results obtained in solution by probing the protected part of the tRNA by chemical reagents.

Crystal structure of a snake venom cardiotoxin

Cardiotoxin VII4 from Naja mossambica mossambica crystallizes in space group P61 (a = b = 73.9 A; c = 59.0 A) with two molecules of toxin (molecular mass = 6715 Da) in the asymmetric unit. The structure was solved by using a combination of multiple isomorphous replacement and density modification methods. Model building and least-squares refinement led to an agreement factor of 27% for a data set to 3-A resolution prior to any inclusion of solvent molecules. The topology of the molecule is similar to that found in short and long snake neurotoxins, which block the nicotinic acetylcholine receptor. Major differences occur in the conformation of the central loop, resulting in a change in the concavity of the molecule. Hydrophobic residues are clustered in two distinct areas. The existence of stable dimeric entities in the crystalline state, with the formation of a six-stranded antiparallel beta sheet, may be functionally relevant.

Crystal structure of yeast tRNAAsp: atomic coordinates

The atomic coordinates of yeast aspartic acid transfer RNA, as determined from a crystallographic investigation to 3 A resolution, are presented. In the ribose phosphate backbone sugars are in the C(3')-endo pucker, except for residues A7, A9, D16, G17, G18, D19, C20, U48, A58, and U60 which are in the C(2')-endo pucker. A least-squares superposition of the phosphorus atoms of yeast tRNAAsp and yeast tRNAPhe enlightens both an overall structural similarity and significant conformational differences. The largest deviations occur in the D-loop and the anticodon region.

Preliminary crystallographic data for exfoliative toxin B from Staphylococcus aureus

The serotype B of exfoliative toxin, isolated from Staphylococcus aureus, strain TC 142, has been crystallized. The monoclinic crystals belong to space group P21, with a = 55.9 A, b = 107.9 A, c = 42.8 A, and beta = 90.9 degrees. The asymmetric unit contains two molecules of molecular weight 30,000.

Crystallization of transfer ribonucleic acids

A compilation of crystallization experiments of tRNAs published in literature as well as original results are given and discussed in this paper. Up to now 17 different tRNA species originating from Escherichia coli and from the yeast Saccharomyces cerevisiae have been crystallized. All structural tRNA families are represented, namely the tRNAs with large or small extra-loops and among them the initiator tRNAs. The tRNAs with small variable loops (4 to 5 nucleotides), e.g. tRNAAsp and tRNAPhe, yield the best diffracting crystals. Crystalline polymorphism is a common feature; about 100 different crystal forms have been observed, but only 6 among them enabled structure determination studies by X-ray diffraction. Crystallization strongly depends upon experimental parameters such as the presence of polyamines and magnesium as well as upon the purity and the molecular integrity of the tRNAs. Crystals are usually obtained by vapour diffusion methods using salts (e.g. ammonium sulfate), organic solvents (e.g. isopropanol, dioxane or 2-methyl-2,4-pentane diol) or polyethylene glycol as precipitants. A methodological strategy for crystallyzing new tRNA species is described.