Antimicrobial activity of phenyllactic acid against Klebsiella pneumoniae and its effect on cell wall membrane and genomic DNA

As Klebsiella pneumoniae (KP) has acquired high levels of resistance to multiple antibiotics, it is considered a worldwide pathogen of concern, and substitutes for traditional antibiotics are urgently needed. 3-Phenyllactic acid (PLA) has been reported to have antimicrobial activity against food-borne bacteria. However, there was no experiment evidence for the exact antibacterial effect and mechanism of PLA kills pathogenic KP. In this study, the Oxford cup method indicated that PLA is effective to KP with a minimum inhibitory concentration of 2.5 mg/mL. Furthermore, PLA inhibited the growth and biofilm formation of in a time- and concentration-dependent manner. In vivo, PLA could significantly increase the survival rate of infected mice and reduce the pathological tissue damage. The antibacterial mode of PLA against KP was further explored. Firstly, scanning electron microscopy illustrated the disruption of cellular ultrastructure caused by PLA. Secondly, measurement of leaked alkaline phosphatase demonstrated that PLA disrupted the cell wall integrity of KP and flow cytometry analysis with propidium iodide staining suggested that PLA damaged the cell membrane integrity. Finally, the results of fluorescence spectroscopy and agarose gel electrophoresis demonstrated that PLA bound to genomic DNA and initiated its degradation. The anti-KP mode of action of PLA was attributed to the destruction of the cell wall, membrane, and genomic DNA binding. These findings suggest that PLA has great potential applications as antibiotic substitutes in feed additives against KP infection in animals.

Solubilization and Pharmacokinetic Behaviors of Sodium Cholate/Lecithin-Mixed Micelles Containing Cyclosporine A

The purpose of this study was to investigate the solubilization capacity of sodium cholate/lecithin-mixed micelles and to evaluate the potential of mixed micelles as a carrier of cyclosporine A for intravenous infusion. The mixed micelles were prepared by coprecipitation technique. The formulation components and preparation procedures, which may affect the solubilization of cyclosporine A, were studied. The dilution stability of cyclosporine A-containing mixed micelles was investigated. Pharmacokinetic behaviors of mixed micelles in rabbits after intravenous infusion were compared with Sandimmun. Results showed the strategies to increase the solubility of cyclosporine A include lowering the molar ratio of sodium cholate to lecithin, increasing the concentration of lecithin, and reducing the ionic strength of the dispersion medium and temperature. The largest solubility was found to be 5.42 +/- 0.16 mg/ml. The leakage of mixed micelles in 5% glucose (5.84%) was much less than that in saline solution (36.7%). The relative bioavailability of mixed micelles versus Sandimmun was 112 +/- 20%, and statistical analysis demonstrated both preparations were bioequivalent. Sodium cholate/lecithin-mixed micelles are promising carriers in the intravenous delivery of cyclosporine A, considering their capability of large-scale production and low-toxic property.

Effects of formulation factors on encapsulation efficiency and release behaviourin vitroof huperzine A-PLGA microspheres

To develop a long-acting injectable huperzine A-PLGA microsphere for the chronic therapy of Alzheimer's disease, the microsphere was prepared by using an o/w emulsion solvent extraction evaporation method based on a series of formulation design of the emulsion. The dialysis method was used for release analysis. The encapsulation efficiency and release amount of the microspheres were determined by a UV/VIS spectrophotometer. The morphology of the microspheres was observed by scanning electron microscopy. The distribution of the drug within microspheres was observed by a confocal laser scanning microscope. The results indicated that the PLGA 15,000 microspheres possessed a smooth and round appearance with average particle size of 50 microm or so. The encapsulation percentages of microspheres prepared from PLGA 15,000, 20,000 and 30,000 were 62.75%, 27.52% and 16.63%, respectively. The drug release percentage during the first day decreased from 22.52% of PLGA 30,000 microspheres to 3.97% of PLGA 15,000 microspheres, the complete release could be prolonged to 3 weeks. The initial burst release of microspheres with higher molecular weight PLGA could be explained by the inhomogeneous distribution of drug within microspheres. The encapsulation efficiency of the microspheres improved as the polymer concentration increased in the oil phase and PVA concentration decreased in the aqueous phase. The burst release could be controlled by reducing the polymer concentration. Evaporation temperature had a large effect on the drug release profiles. It had better be controlled under 30 degrees C. Within a certain range of particle size, encapsulation efficiency decreased and drug release rate increased with the reducing of the particle size.

Effects of formulation factors on encapsulation efficiency and release behaviourin vitroof huperzine A-PLGA microspheres

To develop a long-acting injectable huperzine A-PLGA microsphere for the chronic therapy of Alzheimer's disease, the microsphere was prepared by using o/w emulsion solvent extraction evaporation method based on a series of formulation design of the emulsion. The dialysis method was used for release analysis. The encapsulation efficiency and release amount of the microspheres were determined by UV/VIS spectrophotometry. The morphology of the microspheres was observed by scanning electron microscopy. The distribution of the drug within microspheres was observed by a confocal laser scanning microscope. The results indicated that the PLGA 15 000 microspheres possessed a smooth and round appearance with average particle size of 50 microm or so. The encapsulation percentages of microspheres prepared from PLGA 15 000, 20 000 and 30 000 were 62.75, 27.52 and 16.63%, respectively. The drug release percentage during the first day decreased from 22.52% of PLGA 30 000 microspheres to 3.97% of PLGA 15 000 microspheres, the complete release could be prolonged to 3 weeks. The initial burst release of microspheres with higher molecular weight PLGA could be explained by the inhomogeneous distribution of drug within microspheres. The encapsulation efficiency of the microspheres improved as the polymer concentration increase in oil phase and PVA concentration decreased in aqueous phase. The burst release could be controlled by reducing the polymer concentration. Evaporation temperature had a large effect on the drug release profiles. It had better be controlled under 30 degrees C. Within a certain range of particle size, encapsulation efficiency decreased and drug release rate increased with the reducing of the particle size.

Transport of leuprolide across rat intestine, rabbit intestine and Caco-2 cell monolayer

The purpose of this study was to investigate the transport mechanisms and causes of low bioavailability of leuprolide. The everted gut sac technique and Caco-2 cell monolayer were used to examine: (1) transport properties, enzyme degradation and apparent permeation coefficient (Papp); (2) the influence of trypsin inhibitor, EDTA, chitosan and alginate on drug transport; and (3) the effect of animal species on the intestinal transport. Results showed flux increased with increasing concentration of drug, showing a passive diffusion pathway. The enzyme degradation in rabbit gut was the highest. The Papp of (4.19 +/- 1.33) x 10(-5) cm/s in rat gut was the largest and the Papp of (5.20 +/- 0.20) x 10(-7) cm/s in Caco-2 cell the smallest. At a low concentration of drug, trypsin inhibitor had strong enhancement effect on the Papp by protecting enough drug for permeation. Chitosan had no effect on the activity of alpha-chymotrypsin. The increase in Papp was due to opening of the tight junctions and interaction with cells. In conclusion, both inhibition of proteolytic enzymes and opening the tight junctions to allow for paracellular transport improved the intestinal absorption. At low drug concentration, reduction of enzyme degradation is the most important factor.

Chitosan-coated liposomes: characterization and interaction with leuprolide

The objective of the present work was to investigate the effect of chitosan concentration and lipid type on the characteristics of chitosan-coated liposomes and their interactions with leuprolide. Liposomes from lipid of high purity and low purity were prepared and coated by chitosan. Physical properties, drug entrapment efficiency, and stability upon dilution were respectively compared. Results showed that the particle size increment of liposomes from low purity lipid was larger than that from high purity lipid, indicating a thicker coating layer. The high zeta potential of particles from low purity lipid was thought to play an important role in the resistance to flocculation. As to particles from high purity lipid, polymer bridging caused flocculation at low polymer concentration while at high concentration, the adsorbed chitosan molecule led to steric stabilization. Drug entrapment efficiency decreased as chitosan was added to liposomes, showing the disturbance of bilayers. Upon dilution, the leakage of leuprolide from low purity liposomes was larger than that from high purity liposomes. In conclusion, low purity lipid possessed more negative charge and formed thicker adsorptive layer by stronger electrostatic attraction with chitosan. The interaction between chitosan and the polar head groups on the surface of phospholipid bilayers may interfere with leuprolide entrapped in liposomes and result in the leakage of leuprolide.

Pharmacokinetic behavior of cyclosporin A in rabbits by oral administration of lecithin vesicle and Sandimmun Neoral

The present study was undertaken to investigate the incorporation of lipophilic polypeptide, cyclosporin A (CsA) into lecithin vesicular system and to compare its pharmacokinetics behavior with Sandimmun Neoral (CsA-NEO). Lecithin vesicles of cyclosporin A (CsA-VES) were prepared by the rotary evaporation method, treated further with sonication. Studies were carried out to characterize the vesicles on physical properties, content, entrapment efficiency, particle size, polydispersity and Zeta potential. Pharmacokinetic behaviors were studied in rabbits at dose of 30 mg/kg. Results showed CyA vesicles were spherical particles, with content of 3.137+/-0.060% mg/ml, entrapment efficiency of 98.91+/-0.80%, particle size of 63.89+/-4.75 nm, polydispersity of 43.2+/-6.1% and Zeta potential of -13 mV. The best model fitting experimental data was a two-compartment open model with first-order kinetics. The relative bioavailability of CsA-VES versus CsA-NEO was 105+/-21% (n=6) and statistical analysis demonstrated both preparations were bioequivalent. In conclusion, lecithin vesicles are promising carriers in the oral delivery of CsA, considering their absorption enhancement effect and low-toxic property.

Enhanced transdermal delivery of tetracaine by electroporation

The effect of electroporation on the transport of tetracaine through skin in vitro was studied using side-by-side compartment diffusion cells method. After achieving steady state by passive diffusion, fluxes of tetracaine achieved with passive diffusion, electroporative pulse and iontophoresis were compared. Electroporation (square-wave pulse, voltage 130 V, pulse time 0.4 s, pulse frequency 40 pulses min(-1)) or iontophoresis (0.2.mA cm(-2), lasting for 4 h) increased the transport of tetracaine through skin. The flux of tetracaine at 0.25 h after electroporation (pulse number 400) was 54.6+/-6.0 microg.cm(-2).h(-1), that after iontophoresis was 17.4+/-5.8 microg.cm(-2).h(-1) and that after passive diffusion was 8.2+/-0.5 microg.cm(-2).h(-1). In addition, the fluxes of tetracaine increased with the increasing of pulse number. From these results, it is clear that electroporation is effective in enhancing transdermal delivery of tetracaine and its function is better than iontophoresis.

Transdermal delivery of insulin in mice by using lecithin vesicles as a carrier

The present study was undertaken to characterize the preparation of flexible lecithin vesicles containing insulin and to assess the enhancing effect of these flexible vesicles on the transdermal delivery of a hydrophilic protein. Both conventional and flexible vesicles were prepared by reverse-phase evaporation and treated further by sonication. The free drug was separated from vesicles by column chromatography and analyzed by HPLC. Both conventional and flexible vesicles were transparent colloidal dispersions. The particle size of the conventional and flexible vesicles was 73.5 nm and 87.1 nm with a polydispersity index of 44.5% and 15.6%, respectively. The entrapment efficiencies of conventional and flexible vesicles were 35% and 81%, respectively. When vesicles were nonocclusively applied onto the abdominal mice skin at a dose of 0.90 IU/cm2, in vivo hypoglycemic study showed the drop percentage of blood glucose by flexible vesicles was 21.42 +/- 10.19% at 1 hr, reached 61.48 +/- 8.97% at 5 hr, and was larger than 50% within 18 hr. Conventional vesicles, insulin solution, and saline had no hypoglycemic effect. Probably due to the incorporation or adsorption of a certain amount of insulin into the flexible vesicles during the mixing process, blank flexible vesicles mixed with insulin solution had a certain degree of hypoglycemic effect, though much less than the effect of flexible vesicles containing insulin (p < 0.05). Flexible vesicle may become a promising carrier for the transdermal delivery of hydrophilic polypeptides.

Lecithin vesicular carriers for transdermal delivery of cyclosporin A

Two kinds of vesicles with and without the presence of sodium cholate (flexible vesicles and conventional vesicles) were prepared, using cyclosporin A as model drug. When applied onto the excised abdominal skin of mice non-occlusively, the enhancing effects of vesicles on the penetration of cyclosporin A were assessed by an in vitro permeation technique. The effect of sodium cholate micelles was also studied. In vivo study was carried out by topical application of vesicles onto the mice skin and drug serum concentration was detected. Results showed that after 8 h of administration, flexible vesicles transported 1.16 microg of cyclosporin A through per cm(2) mice skin and amounted to 1.88 microg 24 h later. The residual amount in the skin was 1.78+/-0.51 microg/cm(2). However, flexible vesicles failed to transport measurable amount of drug through pre-hydrated skin while deposited 2.39+/-0.26 microg/cm(2) into the skin. Conventional vesicles failed to transfer cyclosporin A into the receiver while accumulated 0. 72+/-0.19 microg/cm(2) of drug in the skin. Furthermore, 1 and 40% sodium cholate micelles precluded the transport of cyclosporin A. In vivo studies indicated that with the application of flexible vesicles, serum drug concentration of 53.43+/-9.24 ng/ml was detected 2 h later. After the stratum corneum of mouse skin has been destroyed by shaving, flexible vesicles transferred large amount of drug into blood, up to 187.32+/-53.21 ng/ml after 1 h of application. Conventional vesicles failed to deliver measurable amount of drug into the blood under normal skin condition. In conclusion, flexible vesicle is better than conventional vesicle as the carrier for transdermal delivery of cyclosporin A. Penetration and fusion have been suggested to be two major functional mechanisms. Hydration is detrimental to the enhancement effect. Stratum corneum constitutes main barrier to the transport of lipophilic cyclosporin A.

Synthesis and effect of two new penetration enhancers on the transdermal delivery of 5-fluorouracil through excised rat skin

The tetrahydrogeraniol (THG) derivative, ethyl-(3,7-dimethyl octyl thio) acetate (EDOTA) was prepared by reacting tetrahydrogeranyl bromide (obtained by reaction of 40% hydrobromic acid and concentrated sulfuric acid) with ethyl 2-mercaptoacetate, while 3,7-dimethyl octyl propionate (DOP) was synthesized by a common esterification reaction by reacting THG with propionic acid in the presence of cyclohexane and concentrated sulfuric acid. The penetration-enhancing effect of the new enhancers were compared with THG and Azone in vitro using excised rat skin in modified Franz-type diffusion cells. 5-Fluorouracil (5-FU), a hydrophilic drug with poor skin permeability was used as a model permeant. Skin samples were pretreated with pure liquid enhancers for 12 h. 5-FU flux through the control and enhancer-treated skin increased linearly with its concentration in the receptor compartment. EDOTA and DOP interacted with the skin rapidly (< 2h), and the duration of action is at least 24 h. Significant differences were found in the flux values of 5-FU; EDOTA and DOP enhanced the permeability of the drug about 6-fold and 11-fold respectively. Increased partition coefficient and diffusion coefficient values were obtained by these enhancers. The results suggested that the amount of EDOTA and DOP in the skin, especially in the stratum corneum, may be related to their penetration-enhancing effect.

Study of the absorption spectra of the 4f electron transition of the Nd and Er complexes with 2-isobutylformyl-1,3-dione-indane in the presence of TX-100 and its analytical application

The absorption spectra of 4f electron transitions of the systems of neodymium and erbium with 2-isobutylformyl-1,3-dione-indane and TX-100 have been studied by normal and derivative spectrophotometry. Their molar absorptivities at the maximum absorption bands are about 7.2 (at 571 nm) times greater for neodymium and 13.1 (at 519 nm) times greater for erbium than those in the absence of the complexing agents. Use of second derivative spectra both eliminates the interference from other rare earths and increases the sensitivity from neodymium and erbium. Beer's law is obeyed from 0 approximately 20 microg/ml for neodymium and 0 approximately 25 microg/ml for erbium. The relative standard deviations are 1.2% and 1.6% for 5.0 microg/ml of neodymium and 8.0 microg/ml of erbium, respectively. The detection limits (signal-to-noise ratio=2) are 0.14 microg/ml and 0.20 microg/ml. A method for the direct determination of neodymium and erbium in rare earth mixtures with good accuracy and selectivity is proposed.

Automatic deformation analysis by a TV speckle interferometer using a laser diode

A phase-shifting TV speckle interferometer is developed by using the frequency modulation capability of a laser diode and is applied to automatic deformation measurements. Temperature modulation is used for generating the frequency shift of a laser diode. We store four speckle interferograms with relative phase differences of pi/2 in a frame grabber by monitoring a phase-shift signal, which is obtained by integrating the fringe intensity over a local window. The optimum size of the local window is examined experimentally. Then, the optimum processing conditions for reducing the speckle noise in interferograms,including an averaging window size, are found. Experimental results of the automatic deformation analysis indicate a displacement accuracy of better than lambda/30.