Effects of hydroxypropyl-beta-cyclodextrin on the chemical stability and the aqueous solubility of thalidomide enantiomers

The aim of this work was to study the effect of hydroxypropyl-beta-cyclodextrin on the solubility and stability of thalidomide enantiomers in aqueous solutions for clinical oral administration to be used in HIV-infected children. For this reason racemic thalidomide was added to solutions containing different concentrations of hydroxypropyl-beta-cyclodextrin. True complexes were obtained by using hydroxypropyl-beta-cyclodextrin and the solubility of both thalidomide enantiomers was increased directly depending on the amount of hydroxylpropyl-beta-cyclodextrin in the medium although no enantioselective differences were observed at 37 degrees C. The chemical stability of thalidomide enantiomers is clearly improved by hydroxypropyl-beta-cyclodextrin. No enantioselective degradation of thalidomide was observed in sodium chloride solution (0.9%) samples stored at 6 degrees C for nine days when hydroxypropyl-beta-cyclodextrin was employed as excipient. Therefore a thalidomide solution suitable for oral administration can be prepared by adding hydroxypropyl-beta-cyclodextrin at 10% (w/v).

Microspheres containing insulin-like growth factor I for treatment of chronic neurodegeneration

The therapeutic potential of peptide growth factors as insulin-like growth factor I (IGF-I) is currently under intense scrutiny in a wide variety of diseases, including neurodegenerative illnesses. A new poly(lactic-co-glycolide)-based microsphere IGF-I controlled release formulation for subcutaneous (SC) delivery has been developed by a triple emulsion method. The resulting microspheres displayed a mean diameter of 1.5microm, with an encapsulation efficiency of 74.3%. The protein retained integrity after the microencapsulation process as evaluated by circular dichroism and SDS-PAGE. The administration of IGF-I in microspheres caused at least a 30-fold increase in IGF-I mean residence time in rats and mice when compared with the conventional SC solution. Therefore, dosing can be changed from the conventional twice a day to once every 2 weeks. Therapeutic efficacy of this new formulation has been studied in mutant mice with inherited Purkinje cell degeneration (PCD). These mice show a chronic limb discoordination that is resolved after continuous systemic delivery of IGF-I. Normal motor coordination was maintained as long as IGF-I microsphere therapy is continued. Moreover, severely affected PCD mice, with marked ataxia, muscle wasting and shortened life-span showed a significant improvement after continuous IGF-I microsphere therapy as determined by enhanced motor coordination, marked weight gain and extended survival. This new formulation can be considered of great therapeutic promise for some chronic brain diseases.

Effect of gamma-sterilization process on PLGA microspheres loaded with insulin-like growth factor-I (IGF-I)

The influence of gamma-sterilization on the physicochemical properties of a controlled release formulation for the insulin-like growth factor-I (IGF-I) was investigated in this study. Recombinant human insulin-like growth factor-I (rhIGF-I) was efficiently entrapped in poly (D,L-lactide-co-glycolide) (PLGA) microspheres by water-in-oil-in-water (W/O/W) solvent evaporation technique. Microspheres were irradiated at a dose of 25kGy and evaluated by means of scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The stability of the released protein was investigated by circular dichroism (CD) and sodium dodecyl sulfate polyacrilamide gel electrophoresis (SDS-PAGE). No difference was noticed in microsphere size and morphology before and after irradiation. Drug loading remains essentially the same after the sterilization process. However, rhIGF-I aggregation was detected by electrophoresis. In addition, subtle changes in DSC pattern were noticed for irradiated microspheres. In vitro drug release from irradiated microspheres was also affected, showing an increased burst effect. From this results it can be concluded that gamma-sterilization process causes changes in the properties of rhIGF-I loaded microspheres.

Effect of two formulations of benzimidazole carbamates on the viability of cysts of Echinococcus granulosus in vivo

Two different preparations, solution and suspension, of three benzimidazole carbamate drugs, mebendazole, albendazole and ricobendazole, were compared by analyzing their in vivo activity against Echinococcus granulosus cysts in a mouse model. Polyvinylpyrrolidone was used for the elaboration of drug solutions and these formulations manifested better results in terms of reduction of number of viable hydatid cysts in mice than the reference drug suspensions. The effect was more prominent on mebendazole-treated mice, at doses of 25-50 mg/kg. There was a correlation between ED50 and pharmacokinetical parameters of AUC0-infinity and Cmax, showing that a significant improvement on solubility affects the in vivo activity of these drugs.

Micromeritic and packing properties of diclofenac pellets and effects of some formulation variables

The effects of two common diluents (microcrystalline cellulose and calcium phosphate dihydrate), two binding agents (gelatin and methacrylic polymer), and spheronization on the micromeritic (size, shape, density), flow, and packing properties of sodium diclofenac pellets were examined. The shape was assessed as the aspect ratio and was correlated to the flow rate and to the deviation of the tapped porosity from the value of 26%, which corresponds to the ideal rhombohedral packing of spheres. It was found that porosity deviation decreased greatly with spheronization, but it increased with hinder addition. Porosity deviation was proportional to the aspect ratio, while flow rate decreased logarithmically with porosity deviation. Porosity deviation may be a useful index for monitoring the quality of pellets, similar to the aspect ratio, as a successful, simple, and indirect indication of sphericity and of surface roughness as well.

Gentamicin bone cements: characterisation and release (in vitro and in vivo assays)

Due to the extended use of acrylic bone cements, its necessary to develop improved formulations in order to resolve their many drawbacks. The present work was conducted to make a physical-chemical characterisation of this kind of acrylic cement in order to introduce future changes in the formulations to: (1) improve or at least maintain their mechanical properties; (2) diminish their toxicity, and (3) control the drug release (rate and amount). From the dissolution method we can conclude that the preparation method (with or without pressure) of specimens is not responsible for the erratic release. The cumulative amount of gentamicin released was fitted to a semi-empirical equation to explain the possible release mechanism. The powder size, shape and distribution that could affect several properties of bone cement were studied with the aid of different techniques such as SEM, laser diffraction spectroscopy, and powder X-ray diffraction. From SEM micrographs, it was possible to observe that the surfaces of the specimens were very irregular with numerous small craters that may serve as conduits for eluting the antibiotic. An 'in vitro' drug diffusion model is proposed to elucidate the drug release mechanism. Finally an 'in vivo' study was performed to evaluate the antibiotic release to the neighbouring bone sites.

A validated quantitative colorimetric assay for gentamicin

A colorimetric procedure was developed for the quantification of gentamicin. The method was based on the ninhydrin reaction with primary and secondary amines present in the gentamicin. This reaction produces a purple colour. The effects of several factors including pH, ninhydrin concentration and reaction time were investigated to optimize the assay method. Using the assay protocol, the absorption of the gentamicin-ninhydrin mixtures at 400 nm had a linear relationship with the gentamicin concentration ranging from 30 to 120 microg/ml. The colorimetric gentamicin assay reported herein is of great practical value because it is reproducible, sensitive, simple and extremely inexpensive.

Comparison of derivative spectrophotometric and liquid chromatographic methods for the determination of omeprazole in aqueous solutions during stability studies

A first derivative spectrophotometric method was developed for the determination of omeprazole in aqueous solutions during stability studies. The derivative procedure was based on the linear relationship between the omeprazole concentration and the first derivative amplitude at 313 nm. The first derivative spectra was developed between 200 and 400 nm (deltalambda = 8). This method was validated and compared with the official high-performance liquid chromatography (HPLC) method of the USP. It showed good linearity in the range of concentrations studied (10-30 microg ml(-1)), precision (repeatability and inter-day reproducibility), recovery and specificity in stability studies. It also seemed to be 2.59 times more sensitive than the HPLC method. These results allowed to consider this procedure as useful for the rapid analysis of omeprazole in stability studies since there was no interference with its decomposition products.

Quantitative determination of dimethicone in commercial tablets and capsules by Fourier transform infrared spectroscopy and antifoaming activity test

Fourier transform infrared (FTIR) spectroscopy and antifoaming activity test have been employed for the quantitative analysis of dimethicone. Linearity, accuracy and precision are presented for both methods. These methods have been also used to compare different dimethicone-containing proprietary medicines. FTIR spectroscopy has shown to be adequate for quantitation of dimethicone in commercial tablets and capsules in order to comply with USP requirements. The antifoaming activity test is able to detect incompatibilities between dimethicone and other constituents. The presence of certain enzymes in some medicinal products increases the defoaming properties of these formulations.

Methimazole-mediated enhancement of albendazole oral bioavailability and anthelmintic effects against parenteral stages of Trichinella spiralis in mice: the influence of the dose-regime

The influence of methimazole (MTZ) inhibitor of the microsomal oxidases on the systemic availability of the albendazole sulpho-metabolites (ABZS-MT) albendazole-sulphoxide (ABZSO) and albendazole-sulphone (ABZSO2) and on its anthelmintic effects was investigated in a mouse model for helminthic infections. Plasma concentrations of the ABZS-MT were measured by high performance liquid chromatography (HPLC) following treatment of Swiss CD-1 mice with albendazole (ABZ) alone or ABZ plus MTZ, at both single and repeated doses. The anthelmintic effects were assessed in age-matched mice similarly treated following infection with Trichinella spiralis. MTZ significantly (p < 0.01) increased the ABZS-MT plasma concentrations although the pharmacokinetic profile varied greatly according to the dose of ABZ administered. When ABZ was given at a single dose of 50 mg/kg followed by MTZ at 3 mg/kg, a cumulative effect was observed in the ABZS-MT plasma levels with pharmacokinetic parameters (Tmax = 24 h, Cmax= 30.88 microg/ml and AUC = 1120.80 microg h/ml) significantly ( p < 0.01) higher than those following administration of ABZ alone (Tmax = 3 h, Cmax = 11.00 microg/ml and AUC = 268.03 microg h/ml). This cumulative effect was absent following administration of ABZ at 100 mg/kg where, after reaching a maximum (Cmax = 27.23 microg/ml) at 3 h post-administration (Tmax), the ABZS-MTplasma levels felt down quickly to values under those obtained after administration of ABZ at the same dose, but alone (AUC = 362.15 microg h/ml vs. 340.15 microg h/ml, respectively). When ABZ was given at 50 mg/kg together with MTZ three times every 24 h, a rapid decrease was observed in the ABZS-MT plasma levels following administration of both the second and third doses, respectively. The pharmacokinetic profile of ABZS-MT following administration of each of the three doses of ABZ at 100 mg/kg plus MTZ was the same as that obtained after the single treatment. The rapid decrease of the ABZS-MT plasma levels observed after the sustained treatment or after the single treatment at 100 mg/kg could be due to a microsomal oxidase inductive effect (probably the cytochrome P-450) caused by ABZSO. The co-administration of MTZ significantly (p < 0.01) increased the anthelmintic effects of ABZ against both migrating and encysted larvae of T. spiralis. Repeated treatment did not improve the anthelmintic effects of the single treatment as the efficacies against both stages of the parasite were always lower or identical to those of the single treatment at the corresponding doses.

Improvement of albendazole efficacy against enteral, but not against parenteral stages of Trichinella spiralis by preparing solid dispersions in polyvinylpyrrolidone

A comparison was made, in the Trichinella/mouse model, of the anthelmintic effects of albendazole (ABZ) and ricobendazole (RBZ) formulated as solid dispersions in polyvinylpyrrolidone with regard to ABZ formulated as a suspension in carboxymethylcellulose. A solid dispersion significantly increased (p < 0.01) the efficacy of the drugs against intestinal preadult but not against migrating and muscle stages of the parasite. The anthelmintic efficacy of RBZ given as a solid dispersion was equivalent to (against preadult and encysted larvae) or significantly lower than (against migrating larvae) that of ABZ with the same formulation. The pharmacokinetic profiles of ABZSO as measured by HPLC showed no significant differences in the Cmax and AUC following administration of ABZ formulated as a suspension or solid dispersion although the Tmax was significantly lower for the dispersion.

Comparison of reversed-phase liquid chromatography with colorimetry for analysis of phenolphthalein preparations

The high-performance liquid chromatography (HPLC) method of the United States Pharmacopeia has been compared with the colorimetric method of the British Pharmacopoeia for the assay of phenolphthalein in various preparations. Results are presented for the linearity, sensitivity and reproducibility of the two methods. The HPLC method was considered to be more convenient for routine analysis of the preparations of phenolphthalein.

Effect of dissolution profile and (-)-alpha-bisabolol on the gastrotoxicity of acetylsalicylic acid

The effect of particle size and (-)-alpha-bisabolol on the gastric toxicity produced by acetylsalicylic acid (AAS) was studied in rats. AAS crystals of size 0.5-0.4, 0.2-0.05 mm and AAS pellets were administered orally (dose 200 mg/kg) to rats. The effect of particle size on gastric toxicity was not significant (P < 0.05). Small AAS crystals (0.2-0.05 mm) were granulated with ethanol to produce pellets (0.5-0.4 mm). The resultant pellets were less ulcerogenic than AAS crystals (P < 0.05). The pelletization process improves the wetting process of AAS crystals and for this reason produces a faster dissolution profile of AAS. When (-)-alpha-bisabolol, a natural essential oil obtained from camomile oil, was administered orally (dose 0.8-80 mg/kg) with AAS (dose 200 mg/kg), a significant (P < 0.05) protective effect was found. Some possible mechanisms of protection are suggested for (-)-alpha-bisabolol.

Tableting characteristics of micro-aggregated egg albumin particles containing paracetamol

The tableting characteristics of micro-aggregated egg albumin particles containing paracetamol were evaluated and compared with non-micro-encapsulated paracetamol and coagulated egg albumin particles. Mean yield pressure values of micro-aggregated egg albumin particles containing paracetamol and coagulated egg albumin particles were 30.5 and 49.3 MPa, respectively, which were lower than the mean yield pressure obtained for paracetamol (97.5 MPa). Paracetamol tablets obtained with micro-aggregated egg albumin particles did not show the capping characteristic of conventional paracetamol tablets. Crushing strength of paracetamol tablets obtained with egg micro-aggegated particles was similar to that obtained using paracetamol granulated with povidone and gelatin as binders at 3 and 6% (w/w) concentrations. Drug release from the paracetamol tablets depends on the choice of excipients. Crospovidone showed good protective characteristics for the tableting of micro-aggregated particles. Crushing strength of paracetamol tablets formed from egg albumin-coated particles could be increased using crospovidone or microcrystalline cellulose as fillers and was decreased by the use of magnesium stearate. Nevertheless, magnesium stearate was useful to decrease the ejection force.

Comparison of assay methods by second-derivative spectroscopy, colorimetry and fluorescence spectroscopy of salicylic acid in aspirin preparations with a high-performance liquid chromatographic method

Second-derivative spectroscopy, colorimetry and fluorescence spectroscopy have been compared with a high-performance liquid chromatographic (HPLC) method for the assay of salicylic acid in preparations of aspirin. Results are presented for the linearity, sensitivity and reproducibility of these methods. The second-derivative spectroscopic and the HPLC methods were acceptable in terms of linearity, sensitivity and inter-day reproducibility and were convenient for the routine analysis of salicylic acid in aspirin preparations.