The role of macrophages in the disappearance of Meckel's cartilage during mandibular development in mice

Meckel's cartilage is a supporting tissue in the embryonic mandible that disappears during development; however, the precise mechanisms of this disappearance process are still undetermined. In this study, we observed morphological changes of Meckel's cartilage with development and analyzed the factors which might be related to this process. Meckel's cartilage of ICR strain mice from 14 to 19 days gestation (E14-19) were used in this study. Histological and immunohistochemical studies indicated the decrease in the amount of sulfated glycoconjugates and the localization of type I collagen in the Meckel's cartilage matrix during development. Chondrocytes also expressed high acid phosphatase activities at these stages. An organ culture study indicated that Meckel's cartilage at E17 disappeared during the cultivation period, while the cartilage at E14 did not disappear. Massive penetration of macrophages into the perichondrium was detected at E16. RT-PCR analysis of Meckel's cartilage indicated the expression of interleukin-1β, type I collagen, MMP-9 at E17, but not at E14. MIP-1α, the candidate molecule for macrophage chemoattractant factor, was expressed at E14. These results indicated the dynamic matrix changes of Meckel's cartilage during development and suggested that the functional changes of chondrocytes in synthesis of type I collagen might be induced by interleukin-1β secreted by the penetrating macrophages.

[Establishment of simultaneous measurement method of 8 salivary components using urinary test paper and clinical evaluation of oral environment]

PURPOSE

Clinical findings were compared with glucose, protein, albumin, bilirubin, creatinine, pH, occult blood, ketone body, nitrite, and white blood cells contained in whole saliva to investigate the components that most markedly reflect the periodontal condition.

MATERIAL AND METHOD

The subjects were staff of the Prosthodontics Department, Showa University, and patients who visited for dental treatments (57 subjects in total). At the first time, saliva samples were gargled with 1.5 ml of distilled water for 15 seconds and collected by spitting out into a paper cup. At the second time, saliva samples were collected by the same method. At the third time, saliva samples after chewing paraffin gum for 60 seconds were collected by spitting out into a paper cup. Thus whole saliva collecting that was divided on three times. After sampling, 8 mul of the saliva sample was dripped in reagent sticks for the 10 items of urinary test paper and the reflectance was measured using a specific reflectometer. In the periodontal tissue evaluation, the degree of alveolar bone resorption, probing value, and tooth mobility and the presence or absence of lesions in the root furcation were examined and classified into 4 ranks. The mean values in each periodontal disease rank and correlation between the periodontal disease ranks and the components were statistically analyzed.

RESULTS

Bilirubin and ketone body were not measurable. The components density of the 8 items was increased as the periodontal disease rank increased. Regarding the correlation between the periodontal disease ranks and the components, high correlations were noted for protein, albumin, creatinine, pH, and white blood cells.

CONCLUSION

The simultaneous measurement method of 8 salivary components using test paper may be very useful for the diagnosis of periodontal disease of abutment teeth.

Interfacial assembly of bioinspired nanostructures mediated by supersensitive crystals

Laboratory-designed biocomposites structured by organic matrices impregnated with oriented biominerals have been significantly progressed by mimicking biological processes, although several problems associated with their formulation or antigenicity remain to be solved. Here, we describe a new strategy for the formulation of bioinspired nanostructures that involves spontaneous mediation by cooperative interactions between inorganic nanocrystals and host cells without the complex procedures required for laboratory-designed biocomposites. In the present study, osteoblastic cells were cultured on hydroxyapatite and beta-tricalcium phosphate nanocrystals prepared by discharging in electrolytes. Specifically, a high level of assembly of collagenous proteins associated with cell proliferation was achieved on nanoscale beta-tricalcium phosphate crystals by catalysis of polyphosphate chains produced during cell culture. Furthermore, a spatial structure that was practically composed of natural biocomposites found in bone and teeth was obtained on the nanocrystals due to increased cross-linking between inorganic molecules and biomolecules. Suggestions for the spontaneous formulation of bioinspired nanostructures in a living body mediated by inorganic biomaterials are also discussed.

Interleukin-4 inhibition of osteoclast differentiation is stronger than that of interleukin-13 and they are equivalent for induction of osteoprotegerin production from osteoblasts

Interleukin (IL)-4 and IL-13 are closely related cytokines known to inhibit osteoclast formation by targeting osteoblasts to produce an inhibitor, osteoprotegerin (OPG), as well as by directly targeting osteoclast precursors. However, whether their inhibitory actions are the same remains unclear. The inhibitory effect of IL-4 was stronger than that of IL-13 in an osteoclast-differentiation culture system containing mouse osteoblasts and osteoclast precursors. Both cytokines induced OPG production by osteoblasts in similar time- and dose-dependent manners. However, IL-4 was stronger in direct inhibition that targeted osteoclast precursors. Furthermore, IL-4 induced phosphorylation of signal transducer and activator of transcription-6 (STAT6) at lower concentrations than those of IL-13 in osteoclast precursors. IL-4 but not IL-13 strongly inhibited the expression of nuclear factor of activated T-cells, cytoplasmic 1 (nuclear factor-ATc1), a key factor of osteoclast differentiation, by those precursors. Thus, the activities of IL-4 and IL-13 toward osteoclast precursors were shown to be different in regards to inhibition of osteoclast differentiation, whereas those toward osteoblasts for inducing OPG expression were equivalent.

Identification and Characterization of the Precursors Committed to Osteoclasts Induced by TNF-Related Activation-Induced Cytokine/Receptor Activator of NF-κB Ligand

Osteoclasts are terminally differentiated from cells of monocyte/macrophage lineage by stimulation with TNF-related activation-induced cytokine (TRANCE) (receptor activator of NF-kappaB ligand/osteoprotegerin ligand/osteoclast differentiation factor/TNFSF11/CD254). In the present study, we attempted to determine when and how the cell fate of precursors becomes committed to osteoclasts following TRANCE stimulation. Although mouse bone marrow-derived macrophages (BMMs) were able to differentiate into either osteoclasts or dendritic cells, the cells no longer differentiated into dendritic cells after treatment with TRANCE for 24 h, indicating that their cell fate was committed to osteoclasts. Committed cells as well as BMMs were still quite weak in tartrate-resistant acid phosphatase activity, an osteoclast marker, and incorporated zymosan particles by phagocytosis. Interestingly, committed cells, but not BMMs, could still differentiate into osteoclasts even after incorporation of the zymosan particles. Furthermore, IL-4 and IFN-gamma, potent inhibitors of osteoclast differentiation, failed to inhibit osteoclast differentiation from committed cells, and blocking of TRANCE stimulation by osteoprotegerin resulted in cell death. Adhesion to culture plates was believed to be essential for osteoclast differentiation; however, committed cells, but not BMMs, differentiated into multinucleated osteoclasts without adhesion to culture plates. Although LPS activated the NF-kappaB-mediated pathway in BMMs as well as in committed cells, the mRNA expression level of TNF-alpha in the committed cells was significantly lower than that in BMMs. These results suggest that characteristics of the committed cells induced by TRANCE are distinctively different from that of BMMs and osteoclasts.

Involvement of reticular neurons located dorsal to the facial nucleus in activation of the jaw-closing muscle in rats

The location of excitatory premotor neurons for jaw-closing motoneurons was examined by the use of electrical and chemical stimulation and extracellular single-unit recording techniques in the anesthetized rat. Single-pulse electrical stimulation of the supratrigeminal region (SupV) and the reticular formation dorsal to the facial nucleus (RdVII) elicited masseter EMG response at mean (+/-SD) latencies of 2.22 +/- 0.59 ms and 3.10 +/- 1.14 ms, respectively. Microinjection (0.1-0.3 microl) of glutamate (50 mM) or kainate (0.5-100 microM) into RdVII increased masseter nerve activity in artificially ventilated and immobilized rats by 30.2 +/- 40.5% and 50.7 +/- 46.8% compared to baseline values, respectively. Forty reticular neurons were antidromically activated by stimulation of the ipsilateral trigeminal motor nucleus (MoV). Twenty neurons were found in RdVII, and the remaining 20 neurons were located in SupV, or areas adjacent to SupV or RdVII. Eleven neurons in RdVII responded to at least either passive jaw opening or light pressure applied to the teeth or tongue. Nine neurons responded to passive jaw opening. Five of the nine neurons responded to multiple stimulus categories. A monosynaptic excitatory projection from one neuron in RdVII was detected by spike-triggered averaging of the rectified masseter nerve activity. We suggest that reticular neurons in RdVII are involved in increasing masseter muscle activity and that excitatory premotor neurons for masseter motoneurons are likely located in this area. RdVII could be an important candidate for controlling activity of jaw-closing muscles via peripheral inputs.

[Resistance to cyclic fatigue of pulpless teeth with flared root canals restored with different post-and-core materials]

OBJECTIVE

To investigate the resistance to cyclic fatigue of maxillary incisors with flared canals restored with different post-and-core materials.

METHODS

Thirty human maxillary central incisors were assigned randomly to two main groups (non-ferrule and 1-mm ferrule) of 15. Each main group was then divided into 3 groups of 5 specimens and restored with custom cast post-and-core (MPC), resin composite post-and-core (RCP), and resin composite core combined with prefabricated carbon fiber post (FRC), respectively. Every group was subjected to a cyclic fatigue test, and recorded the numbers of load cycles that occurred tooth fracture. All data were analyzed with two-way ANOVA and the Tukey HSD test at alpha = 0.05.

RESULTS

FRC revealed significantly higher fatigue strength than the other groups (P < 0.05). Preparing a dentin ferrule increased significantly fatigue resistance (P < 0.05). The favorable (retrieval) fracture pattern of the tested specimens was discovered only in RCP.

CONCLUSIONS

Using FRC may get a long fatigue life in restoring pulpless teeth with flared canals. Dentin ferrule preparation is necessary to enhance resistance of the restorations to cyclic fatigue.

[Study on color stability of composite resins for a facing crown polymerized with high output photo-curing unit]

PURPOSE

This study investigated the color stability of composite resins for a facing crown cured with a high output photo-curing unit (Hyper LII, YAMAHACHI DENTAL MFG., CO.).

METHODS

Four brands of composite resins for a facing crown after polymerization with Hyper LII were immersed in coffee. Color measurement was carried out before and 1, 2, and 4 weeks after immersion, and the results were compared.

RESULTS

1. After immersion in coffee, the L* values decreased gradually, the a* values showed little change, and the b* values increased gradually in all resins. 2. The difference in the color difference values (deltaE*ab) between each material became greater with time; the deltaE*ab after 4 weeks immersion were from 3.0 [Dentacolor (DEC), dentin specimen] to 6.3 [Solidex (SOL), enamel specimen] on polished surfaces, and from 0.9 [Gradia (GRA), dentin specimen] to 5.2 (SOL, enamel specimen) on non-polished surfaces. However, the deltaE*ab were 1/3 to 1/5 better than those of our previous studies. 3. The enamel specimens showed larger color differences than the dentin specimens. 4. When polished surfaces were compared with non-polished surfaces, Cesead II (CEII), DEC and SOL showed almost equal color differences while GRA showed larger color differences.

CONCLUSIONS

This study suggests that composite resins for a facing crown cured with a high output photo-curing unit result in a decrease of color changes with time and an improvement of color stability.

Resistance to Cyclic Fatigue and Fracture of Structurally Compromised Root Restored with Different Post and Core Restorations

The aim of this study was to evaluate the resistance to fracture of endodontically treated teeth with flared canals restored with different post and core restorations under static and cyclic fatigue loadings. Sixty human maxillary central incisors were used. Two main groups (non-ferrule and 1-mm ferrule) were divided into three types of restoration: custom cast post-and-core (MPC), resin composite post-and-core (RCP), and resin composite core in combination with prefabricated carbon fiber post (FRC). Half of each group was subjected to a static loading test, and the other to a cyclic fatigue test. FRC exhibited a significantly higher number of load cycles than the other groups, and MPC showed the highest failure load among the tested groups. However, all FRC and MPC specimens demonstrated unfavorable root fractures. The results of this study suggested that RCP prepared with 1-mm ferrule was the most desirable restoration for structurally compromised roots, as relatively strong resistance to cyclic fatigue and fracture was revealed--given that all RCP specimens demonstrated favorable root fracture.

Effect of Nd:YAG laser irradiation on shear bond strength of glass-lonomer luting cement to dentin surface

PURPOSE

The purposes of this study were to evaluate the shear bond strength of luting glass-ionomer cement to a dentin surface treated by pulsed Nd:YAG laser irradiation, and to prove the hypothesis that the bond strength of glass-ionomer luting cement to dentin is favorably altered after Nd:YAG laser irradiation.

MATERIALS AND METHODS

Sixty-four extracted human molars with an exposed flat dentin surface were divided into four groups (n = 16). After painting black ink on their surfaces, the teeth of groups 1, 2, and 3 were irradiated by an Nd:YAG laser at 1.064-microm wavelength at 1, 2, and 3 W, respectively; group 4 was untreated and served as a control. Some specimens of each group were used for morphologic and atomic analytic study, and the others were used for shear bond testing. The shear bond test was performed after cylindric titanium specimens were cemented with glass-ionomer cement on a circular dentin area and specimens were immersed in distilled water. The tested specimens were also morphologically investigated.

RESULTS

Shear bond strength of group 3 was significantly higher than that of the control group. Morphologic observation of the cement-dentin interface showed good adaptation of the luting cement to laser-treated dentin. Analysis of atomic contents on the dentin surface showed a significant increase of calcium:phosphorus ratio after laser irradiation.

CONCLUSION

The dentin surface was modified morphologically and chemically, and the shear bond strength of glass-ionomer luting cement to dentin was increased by Nd:YAG laser irradiation at 3 W.

Coeruleotrigeminal suppression of nociceptive sensorimotor function during inflammation in the craniofacial region of the rat

Descending action from the locus coeruleus (LC) on the trigeminal sensorimotor function was evaluated in a rat model of oral-facial inflammation. For the induction of oral-facial inflammation, mustard oil (20% solution in 20microl mineral oil) was injected into the region of the temporomandibular joint (TMJ). One week before testing, rats received bilateral lesions of the LC using a cathodal current. The electromyogram (EMG) threshold, which is the threshold intensity for the onset of EMG activity of the masseter muscle evoked by pressure on the TMJ region, was used in the present study as an indicator of the trigeminal sensorimotor function. Following mustard oil injection, in the LC-lesioned rats, EMG thresholds significantly decreased at 30min, which lasted up to 240min. In contrast, EMG thresholds in the LC-intact rats returned to the level before injection after 180min. Systemic naloxone (1.3mg/kg, i.v.) produced a further decrease of EMG thresholds in both the LC-intact and LC-lesioned rats. Under the existence of naloxone, EMG thresholds in the LC-lesioned rats were significantly lower than those of the LC-intact rats. These results suggest that oral-facial inflammation activates the coeruleotrigeminal modulating system and that an action of this system is independent of the opioid depressive mechanism.

Acute effects of ovariectomy on wound healing of alveolar bone after maxillary molar extraction in aged rats

Acute effects of ovariectomy on the bone wound healing processes after maxillary molar extraction in aged rats were examined by means of quantitative scanning electron microscopy (SEM), backscattered electron image (BSE) analysis and energy-dispersive X-ray (EDX) microanalysis. Six-month-old female rats underwent either sham operation or bilateral ovariectomy, and 7 days postoperatively, the maxillary first molars were extracted. On post-extraction days 7, 30 and 60, the dissected maxillary bone surfaces were examined by SEM to reveal the bone formative and resorptive areas around the extracted alveolar sockets. In addition, the resin-embedded maxillae were micromilled in the transverse direction through the extracted alveolar sockets, and the newly-formed bone mass on the buccal bone surfaces and within the extracted sockets was examined by BSE analysis. Compared with sham-operated controls, the extent of newly-formed bone mass on the buccal bone surfaces in OVX rats was significantly decreased, due to increased bone resorption. On the other hand, new bone formation within the extracted sockets was similar in the experimental groups. In EDX microanalysis of these newly-formed bone matrices, both Ca and P weight % and Ca/P molar ratio were similar in the experimental groups. Our results suggest that 1) acute estrogen deficiency induced by ovariectomy stimulates sustained bone resorption, but has less effect on bone formation, and 2) bone wound healing after maxillary molar extraction within extracted alveolar sockets is not significantly delayed by ovariectomy, but bony support by newly-formed bone mass on the maxillary bone surfaces at the buccal side of the extracted sockets is significantly decreased, due to increased bone resorption.

Stimulation of the locus coeruleus suppresses trigeminal sensorimotor function in the rat

The nucleus locus coeruleus (LC) has been implicated in the modulation of the spinal sensorimotor function. The aim of the present study was to examine the effect of electrical stimulation of the LC on sensorimotor function in the trigeminal system. The following two cases of sensorimotor behaviors mediated by the trigeminal brainstem sensory nuclear complex were examined: (1) the activity of the masseter muscle evoked by pressure on the region of the temporomandibular joint (TMJ); and (2) the activity of the digastric muscle evoked by electrical stimulation of the tooth pulp, resulting in the jaw-opening reflex. In the first case, LC stimulation at 10, 30 and 50 microA resulted in a 70%, 68% and 55% reduction in the magnitude of electromyogram (EMG) activity of the masseter muscle compared with the control (without LC stimulation), respectively. The threshold intensity for the onset of masseter EMG activity increaced to 106%, 111% and 121% of the control with 10, 30 and 50 microA LC stimulation, respectively. In the second case, EMG magnitude in response to the digastric muscle decreased to 42% of the control when 30 microA of LC stimulation was delivered. These results suggest that descending influences from the LC can act in suppression of the trigeminal sensorimotor function.

Bone wound healing after maxillary molar extraction in ovariectomized aged rats: quantitative backscattered electron image analysis

The processes of bone wound healing after maxillary molar extraction in ovariectomized aged rats were examined by means of quantitative backscattered electron image analysis and energy-dispersive X-ray microanalysis. Six-month-old female rats were either sham-operated or underwent bilateral ovariectomy (OVX), and 60 days postoperatively, the maxillary first molars were extracted. On post-extraction days 7, 30, and 60, the dissected and resin-embedded maxillae were micromilled in the transverse direction through the extracted alveolar sockets, and new bone formation on the buccal maxillary bone surface and within the extracted alveolar sockets was examined. In both sham-operated control and OVX rats, new bone formation was recognized on the buccal bone surface, as well as within the extracted sockets, and increased daily through to day 60. In comparison to sham-operated controls, new bone formation in OVX rats was significantly decreased both on the buccal bone surface and within the extracted sockets. Our results suggest that bone wound healing by new bone formation after maxillary molar extraction is significantly decreased in OVX-induced osteoporosis.

Effects of ovariectomy on bone morphology in maxillae of mature rats

Postmenopausal oestrogen deficiency results in bone loss (osteoporosis) in humans and experimental animals. The loss of trabecular bone in the ovariectomized (OVX) rat provides a useful experimental model of post-menopausal osteoporosis. At 5 months after ovariectomy of 3-month-old female rats, the mid and distal femurs and maxillae were dissected and processed for quantitative backscattered electron microscopic examinations. Histomorphometric analysis of femurs in OVX rats showed significant loss in metaphyseal trabecular bone areas compared with sham-operated controls; no significant bone loss was observed in the cortical bone areas of mid-diaphyses in OVX rats. Net bone areas in the maxillae of OVX rats was similar to that of sham-operated controls. Bone structure of maxillae in OVX rats was also similar to that in controls. Our results suggest that, in this animal model of osteoporosis, prominent bone loss occurs mainly in the bone areas formed by endochondral ossification such as distal femurs, but those areas formed by intramembranous ossification such as mid-femurs and maxillae sustained less effects by OVX.

Bone wound healing after maxillary molar extraction in ovariectomized aged rats

We studied bone wound healing processes after maxillary molar extraction in ovariectomized (OVX) aged rats, as an experimental model of postmenopausal osteoporosis, by means of scanning electron microscopy. Six-month-old female rats were either sham-operated or bilaterally OVX; and at 60 days postoperatively, the maxillary first molars were extracted. On postextraction days 4, 7, 30 and 60, the dissected maxillae were fixed and the alveolar bone surfaces around the extracted alveolar sockets were examined. In sham-operated controls, new bone formation was recognized on the buccal-side bone surfaces on day 4 and then increased in extent daily through day 60 mainly on the buccal and mesial sides. On day 60, the extracted sockets were filled with new bone mass and the surrounding alveolar bone surfaces had become smooth, indicating decreased bone metabolism. Bone resorption was prominent throughout the bone surfaces around and within the extracted sockets, increased in extent through day 7, but had decreased by day 60. In comparison to sham-operated controls, new bone formation in OVX rats was slightly increased in the early phase but subsequently showed a marked decrease. Bone resorption in OVX rats was greatly stimulated and was comparatively long-lasting. These results suggest that, under the present experimental conditions, in bone wound healing after maxillary molar extraction, (i) ovariectomy stimulates sustained bone resorption and (ii) bone formation and resorption both take place at specific sites on alveolar bone surfaces.

Accuracy of titanium cast crowns obtained from calcia base mold

A calcia base investment has high stability even with melted titanium and, therefore, can produce an excellent titanium casting. In this study, titanium powder was distributed to a calcia base investment as an expanding agent, and the firing temperature of the mold was controlled at 800 degrees C. The calcia base investment with 6.1% wt titanium powder expanded 1.7% during 2 h heating at 800 degrees C. The marginal discrepancies between the die and the titanium crown were improved by the addition of the titanium powder to the investment. The mean thickness of the cement layer between the epoxy teeth and the crown using 6.1% wt titanium powder content was from 40-80 microns.

Thalamic- and cerebellar-projecting interpolaris neuron responses to afferent inputs

Thalamic- and cerebellar-projecting interpolaris neuron responses to afferent inputs from the temporomandibular joint (TMJ) and/or the masseter muscle (Mm) were examined in rats. Of 230 neurons tested, 24 could be antidromically stimulated from the contralateral ventral posteromedial thalamic nucleus (VPM), and 27 of 91 neurons tested were stimulated from the ipsilateral posteromedial part of crus II of the cerebellar cortex. None had dual projections. The thalamic-projecting neurons were recorded in the dorsomedial region of the interpolaris; most cerebellar-projecting neurons were at the medial border of the interpolaris. Ten of 24 thalamic- and 17 of 27 cerebellar-projecting neurons received nociceptive information. Afferent inputs from the TMJ and the Mm converged on 6 of 24 thalamic-projecting neurons and on 16 of 27 cerebellar-projecting neurons. In both the thalamic- and cerebellar-projecting neurons, there was no difference between the non-nociceptive and nociceptive neurons in mean antidromic latency. The results suggest that the interpolaris integrates and relays afferent inputs from deep oral structures.