Establishing ZIF-8 as a reference material for hydrogen cryoadsorption: An interlaboratory study

Hydrogen storage by cryoadsorption on porous materials has the advantages of low material cost, safety, fast kinetics, and high cyclic stability. The further development of this technology requires reliable data on the H2 uptake of the adsorbents, however, even for activated carbons the values between different laboratories show sometimes large discrepancies. So far no reference material for hydrogen cryoadsorption is available. The metal-organic framework ZIF-8 is an ideal material possessing high thermal, chemical, and mechanical stability that reduces degradation during handling and activation. Here, we distributed ZIF-8 pellets synthesized by extrusion to 9 laboratories equipped with 15 different experimental setups including gravimetric and volumetric analyzers. The gravimetric H2 uptake of the pellets was measured at 77 K and up to 100 bar showing a high reproducibility between the different laboratories, with a small relative standard deviation of 3-4 % between pressures of 10-100 bar. The effect of operating variables like the amount of sample or analysis temperature was evaluated, remarking the calibration of devices and other correction procedures as the most significant deviation sources. Overall, the reproducible hydrogen cryoadsorption measurements indicate the robustness of the ZIF-8 pellets, which we want to propose as a reference material.

Producing Alkali Metal Hydrides from Hydroxides

In this study, a novel method for producing different alkali metal hydrides (NaH, KH, RbH, and CsH) from their corresponding metal hydroxides (NaOH, KOH, RbOH, and CsOH) is presented. For the production of NaH from NaOH, a variety of metallic reducing agents (Mg, Al, Si, CaH2, Cr, Mn, and Sr) were investigated. The reactions took place in an autoclave reactor with paraffin oil at 250 °C and 14 bar of H2 pressure. Splitting the process into two steps (metal formation and hydrogenation) simplified the separation and purification for the produced metal hydride. Moreover, the study explores the potential for this method of NaH production to be used for NaBH4 production and regeneration for hydrogen export applications. This approach offers an alternative, cost-effective method for producing NaH.

Stannaborates: tuning the ion conductivity of dodecaborate salts with tin substitution

Metal substituted dodecaborate anions can be coupled with alkali metal cations to have great potential as solid-state ion conductors for battery applications. A tin atom can replace a B-H unit within an unsubstituted dodecaborate cage to produce a stable, polar divalent anion. The chemical and structural change in forming a stannaborate results in a modified crystal structure of respective group 1 metal salts, and as a result, improves the material's ion conductivity. Li2B11H11Sn shows high ion conductivity of ∼8 mS cm-1 at 130 °C, similar to the state-of-the-art LiCB11H12 at these temperatures, however, obtaining high ion conductivity at room temperature is not possible with pristine alkali metal stannaborates.

Thermochemical energy storage in barium carbonate enhanced by iron(III) oxide

Renewable energy requires cost effective and reliable storage to compete with fossil fuels. This study introduces a new reactive carbonate composite (RCC) where Fe₂O₃ is used to thermodynamically destabilise BaCO₃ and reduce its decomposition temperature from 1400 °C to 850 °C, which is more suitable for thermal energy storage applications. Fe₂O₃ is consumed on heating to form BaFe₁₂O₁₉, which is a stable Fe source for promoting reversible CO₂ reactions. Two reversible reaction steps were observed that corresponded to, first, the reaction between β-BaCO₃ and BaFe₁₂O₁₉, and second, between γ-BaCO₃ and BaFe₁₂O₁₉. The thermodynamic parameters were determined to be ΔH = 199 ± 6 kJ mol^-1 of CO₂, ΔS = 180 ± 6 J K^-1 mol^-1 of CO₂ and ΔH = 212 ± 6 kJ mol^-1 of CO₂, ΔS = 185 ± 7 J K^-1 mol^-1 of CO₂, respectively, for the two reactions. Due to the low-cost and high gravimetric and volumetric energy density, the RCC is demonstrated to be a promising candidate for next generation thermal energy storage.

Na2B11H13 and Na11(B11H14)3(B11H13)4 as potential solid-state electrolytes for Na-ion batteries

Solid-state sodium batteries have attracted great attention owing to their improved safety, high energy density, large abundance and low cost of sodium compared to the current Li-ion batteries. Sodium-boranes have been studied as potential solid-state electrolytes and the search for new materials is necessary for future battery applications. Here, a facile and cost-effective solution-based synthesis of Na₂B₁₁H₁₃ and Na₁₁(B₁₁H₁₄)₃(B₁₁H₁₃)₄ is demonstrated. Na₂B₁₁H₁₃ presents an ionic conductivity in the order of 10^-7 S cm^-1 at 30 °C, but undergoes an order-disorder phase transition and reaches 10^-3 S cm^-1 at 100 °C, close to that of liquids and the solid-state electrolyte Na-β-Al₂O₃. The formation of a mixed-anion solid-solution, Na₁₁(B₁₁H₁₄)₃(B₁₁H₁₃)₄, partially stabilises the high temperature structural polymorph observed for Na₂B₁₁H₁₃ at room temperature and it exhibits Na⁺ conductivity higher than its constituents (4.7 × 10^-5 S cm^-1 at 30 °C). Na₂B₁₁H₁₃ and Na₁₁(B₁₁H₁₄)₃(B₁₁H₁₃)₄ exhibit an oxidative stability limit of 2.1 V vs. Na⁺/Na.

Thermal properties of thermochemical heat storage materials

The thermal conductivity, thermal diffusivity and heat capacity of materials are all vital properties in the determination of the efficiency of a thermal system. However, the thermal transport properties of heat storage materials are not consistent across previous studies, and are strongly dependent on the sample composition and measurement method. A comprehensive analysis of thermal transport properties using a consistent preparation and measurement method is lacking. This study aims to provide the foundation for a detailed insight into thermochemical heat storage material properties with consistent measurement methods. The thermal transport properties of pelletised metal hydrides, carbonates and oxides were measured using the transient plane source method to provide the thermal conductivity, thermal diffusivity and heat capacity. This information is valuable in the development of energy storage and chemical processing systems that are highly dependent on the thermal conductivity of materials.

Thermochemical energy storage performance of zinc destabilized calcium hydride at high-temperatures

CaH2 has 20 times the energy density of molten salts and was patented in 2010 as a potential solar thermal energy storage material. Unfortunately, its high operating temperature (>1000 °C) and corrosivity at that temperature make it challenging to use as a thermal energy storage (TES) material in concentrating solar power (CSP) plants. To overcome these practical limitations, here we propose the thermodynamic destabilization of CaH2 with Zn metal. It is a unique approach that reduces the decomposition temperature of pure CaH2 (1100 °C at 1 bar of H2 pressure) to 597 °C at 1 bar of H2 pressure. Its new decomposition temperature is closer to the required target temperature range for TES materials used in proposed third-generation high-temperature CSP plants. A three-step dehydrogenation reaction between CaH2 and Zn (1 : 3 molar ratio) was identified from mass spectrometry, temperature-programmed desorption and in situ X-ray diffraction studies. Three reaction products, CaZn13, CaZn11 and CaZn5, were confirmed from in situ X-ray diffraction studies at 190 °C, 390 °C and 590 °C, respectively. The experimental enthalpy and entropy of the second hydrogen release reaction were determined by pressure composition isotherm measurements, conducted between 565 and 614 °C, as ΔHdes = 131 ± 4 kJ mol-1 H2 and ΔSdes = 151 ± 4 J K-1 mol-1 H2. Hydrogen cycling studies of CaZn11 at 580 °C showed sufficient cycling capacity with no significant sintering occurring during heating, as confirmed by scanning electron microscopy, demonstrating its great potential as a TES material for CSP applications. Finally, a cost comparison study of known destabilized CaH2 systems was carried out to assess the commercial potential.

Thermodynamics and performance of the Mg-H-F system for thermochemical energy storage applications

Magnesium hydride (MgH₂) is a hydrogen storage material that operates at temperatures above 300 °C. Unfortunately, magnesium sintering occurs above 420 °C, inhibiting its application as a thermal energy storage material. In this study, the substitution of fluorine for hydrogen in MgH₂ to form a range of Mg(H_xF_1-x)₂ (x = 1, 0.95, 0.85, 0.70, 0.50, 0) composites has been utilised to thermodynamically stabilise the material, so it can be used as a thermochemical energy storage material that can replace molten salts in concentrating solar thermal plants. These materials have been studied by in situ synchrotron X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, temperature-programmed-desorption mass spectrometry and Pressure-Composition-Isothermal (PCI) analysis. Thermal analysis has determined that the thermal stability of Mg-H-F solid solutions increases proportionally with fluorine content, with Mg(H_0.85F_0.15)₂ having a maximum rate of H₂ desorption at 434 °C, with a practical hydrogen capacity of 4.6 ± 0.2 wt% H₂ (theoretical 5.4 wt% H₂). An extremely stable Mg(H_0.43F_0.57)₂ phase is formed upon the decomposition of each Mg-H-F composition of which the remaining H₂ is not released until above 505 °C. PCI measurements of Mg(H_0.85F_0.15)₂ have determined the enthalpy (ΔH_des) to be 73.6 ± 0.2 kJ mol^-1 H₂ and entropy (ΔS_des) to be 131.2 ± 0.2 J K^-1 mol^-1 H₂, which is slightly lower than MgH₂ with ΔH_des of 74.06 kJ mol^-1 H₂ and ΔS_des = 133.4 J K^-1 mol^-1 H₂. Cycling studies of Mg(H_0.85F_0.15)₂ over six absorption/desorption cycles between 425 and 480 °C show an increased usable cycling temperature of ∼80 °C compared to bulk MgH₂, increasing the thermal operating temperatures for technological applications.

Novel synthesis of porous Mg scaffold as a reactive containment vessel for LiBH4

A novel porous Mg scaffold was synthesised and melt-infiltrated with LiBH₄ to simultaneously act as both a confining framework and a destabilising agent for H₂ release from LiBH₄.

The influence of LiH on the rehydrogenation behavior of halide free rare earth (RE) borohydrides (RE = Pr, Er)

Rare earth (RE) metal borohydrides are receiving immense consideration as possible hydrogen storage materials and solid-state Li-ion conductors. In this study, halide free Er(BH4)3 and Pr(BH4)3 have been successfully synthesized for the first time by the combination of mechanochemical milling and/or wet chemistry. Rietveld refinement of Er(BH4)3 confirmed the formation of two different Er(BH4)3 polymorphs: α-Er(BH4)3 with space group Pa3[combining macron], a = 10.76796(5) Å, and β-Er(BH4)3 in Pm3[combining macron]m with a = 5.4664(1) Å. A variety of Pr(BH4)3 phases were found after extraction with diethyl ether: α-Pr(BH4)3 in Pa3[combining macron] with a = 11.2465(1) Å, β-Pr(BH4)3 in Pm3[combining macron]m with a = 5.716(2) Å and LiPr(BH4)3Cl in I4[combining macron]3m, a = 11.5468(3) Å. Almost phase pure α-Pr(BH4)3 in Pa3[combining macron] with a = 11.2473(2) Å was also synthesized. The thermal decomposition of Er(BH4)3 and Pr(BH4)3 proceeded without the formation of crystalline products. Rehydrogenation, as such, was not successful. However, addition of LiH promoted the rehydrogenation of RE hydride phases and LiBH4 from the decomposed RE(BH4)3 samples.

Complex transition metal hydrides incorporating ionic hydrogen: thermal decomposition pathway of Na2Mg2FeH8 and Na2Mg2RuH8

The optimised syntheses of Na₂Mg₂FeH₈ and Na₂Mg₂RuH₈ are reported and their thermal decomposition pathways established. The enthalpy and entropy of each decomposition step has been determined by PCI measurements.

Modular assembly of a preorganised, ditopic receptor for dicarboxylates

Two types of calix[4]arene derived hosts for anions with, respectively, 1,3-alternate and cone conformations have been prepared; the 1,3-alternate system binds dicarboxylate anions in a ditopic manner while the cone compounds are deprotonated by carboxylates.