Li5.5PS4.5Cl1.5-Based All-Solid-State Battery with a Silver Nanoparticle-Modified Graphite Anode for Improved Resistance to Overcharging and Increased Energy Density

All-solid-state lithium batteries (ASSLBs) are attracting tremendous attention due to their improved safety and higher energy density. However, the use of a metallic lithium anode poses a major challenge due to its low stability and processability. Instead, the graphite anode exhibits high reversibility for the insertion/deinsertion of lithium ions, giving ASSLBs excellent cyclic stability but a lower energy density. To increase the energy density of ASSLBs with the graphite anode, it is necessary to lower the negative/positive (N/P) capacity ratio and to increase the charging voltage. These strategies bring new challenges to lithium metal plating and dendrite growth. Here, a nano-Ag-modified graphite composite electrode (Ag@Gr) is developed to overcome these shortcomings for Li5.5PS4.5Cl1.5-based ASSLBs. The Ag@Gr composite exhibits a strong ability to inhibit lithium metal plating and fast lithium-ion transport kinetics. Ag nanoparticles can accommodate excess Li, and the as-obtained Li-Ag alloy enhances the kinetics of the composite electrode. The ASSLB with the Li(Ni0.8Co0.1Mn0.1)O2 cathode and Ag@Gr anode achieves an energy density of 349 W h kg-1. The full cell using Ag@Gr with an N/P ratio of 0.6 also highlights the rate performance. This work provides a simple and effective method to regulate the charge transport kinetics of graphite anodes and improve the cyclic performance and energy density of ASSLBs.

A stable lithium metal anode enabled by the site-directed lithium deposition of ZnO-nanosheets modified carbon cloth

Uneven lithium (Li) metal deposition typically results in uncontrollable dendrite growth, which renders an unsatisfactory cycling stability and coulombic efficiency (CE) of Li metal batteries (LMBs), preventing their practical application. Herein, a novel carbon cloth with the modification of ZnO nanosheets (ZnO@CC) is fabricated for LMBs. The as-prepared ZnO@CC with a cross-linked network significantly reduces the local current density, and the design of ZnO nanosheets can promote the uniform deposition of Li metal as lithiophilic sites. As a result, the Li metal anodes (LMAs) based on ZnO@CC (ZnO@CC@Li) enables a long cycle life over 640 hours with a low overpotential of 65 mV at a current density of 4 mA cm-2 with a capacity of 1 mAh cm-2 in the symmetric cell. Moreover, when coupling the ZnO@CC@Li with a LiFePO4 cathode, the assembled full cell exhibits excellent long cycle and rate performance, highlighting its promising practical application prospect.

Plasma Technology for Advanced Electrochemical Energy Storage

"Carbon Peak and Carbon Neutrality" is an important strategic goal for the sustainable development of human society. Typically, a key means to achieve these goals is through electrochemical energy storage technologies and materials. In this context, the rational synthesis and modification of battery materials through new technologies play critical roles. Plasma technology, based on the principles of free radical chemistry, is considered a promising alternative for the construction of advanced battery materials due to its inherent advantages such as superior versatility, high reactivity, excellent conformal properties, low consumption and environmental friendliness. In this perspective paper, we discuss the working principle of plasma and its applied research on battery materials based on plasma conversion, deposition, etching, doping, etc. Furthermore, the new application directions of multiphase plasma associated with solid, liquid and gas sources are proposed and their application examples for batteries (e. g. lithium-ion batteries, lithium-sulfur batteries, zinc-air batteries) are given. Finally, the current challenges and future development trends of plasma technology are briefly summarized to provide guidance for the next generation of energy technologies.

Seedlings of Poncirus trifoliata exhibit tissue-specific detoxification in response to NH4 + toxicity

Ammonium nitrogen (NH4 +-N) is essential for fruit tree growth, but the impact of excess NH4 +-N from fertilizer on evergreen citrus trees is unclear. In a climate chamber, 8-month-old citrus plants were exposed to five different hydroponic NH4 +-N concentrations (0, 5, 10, 15 and 20 mm) for 1 month to study effects of NH4 +-N on growth characteristics, N uptake, metabolism, antioxidant enzymes and osmotic regulatory substances. Application of 10 mm NH4 +-N adversely affected root plasma membrane integrity, root physiological functions, and plant biomass. MDA, CAT, POD, APX and SOD content were significantly correlated with leaf N metabolic enzyme activity (GOGAT, GDH, GS and NR). GDH was the primary enzyme involved in NH4 +-N assimilation in leaves, while the primary pathway involved in roots was GS-GOGAT. Under comparatively high NH4 + addition, roots were the main organs involved in NH4 + utilization in citrus seedlings. Our results demonstrated that variations in NH4 + concentration and enzyme activity in various organs are associated with more effective N metabolism in roots than in leaves to prevent NH4 + toxicity in evergreen woody citrus plants. These results provide insight into the N forms used by citrus plants that are important for N fertilizer management.

Hyphae Carbon Coupled with Gel Composite Assembly for Construction of Advanced Carbon/Sulfur Cathodes for Lithium-Sulfur Batteries

The design and fabrication of novel carbon hosts with high conductivity, accelerated electrochemical catalytic activities, and superior physical/chemical confinement on sulfur and its reaction intermediates polysulfides are essential for the construction of high-performance C/S cathodes for lithium-sulfur batteries (LSBs). In this work, a novel biofermentation coupled gel composite assembly technology is developed to prepare cross-linked carbon composite hosts consisting of conductive Rhizopus hyphae carbon fiber (RHCF) skeleton and lamellar sodium alginate carbon (SAC) uniformly implanted with polarized nanoparticles (V2O3, Ag, Co, etc.) with diameters of several nanometers. Impressively, the RHCF/SAC/V2O3 composites exhibit enhanced physical/chemical adsorption of polysulfides due to the synergistic effect between hierarchical pore structures, heteroatoms (N, P) doping, and polar V2O3 generation. Additionally, the catalytic conversion kinetics of cathodes are effectively improved by regulating the 3D carbon structure and optimizing the V2O3 catalyst. Consequently, the LSBs assembled with RHCF/SAC/V2O3-S cathode show exceptional cycle stability (capacity retention rate of 94.0% after 200 cycles at 0.1 C) and excellent rate performance (specific capacity of 578 mA h g-1 at 5 C). This work opens a new door for the fabrication of hyphae carbon composites via fermentation for electrochemical energy storage.

An Advanced Gel Polymer Electrolyte for Solid-State Lithium Metal Batteries

All-solid-state lithium metal batteries (LMBs) are regarded as one of the most viable energy storage devices and their comprehensive properties are mainly controlled by solid electrolytes and interface compatibility. This work proposes an advanced poly(vinylidene fluoride-hexafluoropropylene) based gel polymer electrolyte (AP-GPEs) via functional superposition strategy, which involves incorporating butyl acrylate and polyethylene glycol diacrylate as elastic optimization framework, triethyl phosphate and fluoroethylene carbonate as flameproof liquid plasticizers, and Li7La3Zr2O12 nanowires (LLZO-w) as ion-conductive fillers, endowing the designed AP-GPEs/LLZO-w membrane with high mechanical strength, excellent flexibility, low flammability, low activation energy (0.137 eV), and improved ionic conductivity (0.42 × 10-3 S cm-1 at 20 °C) due to continuous ionic transport pathways. Additionally, the AP-GPEs/LLZO-w membrane shows good safety and chemical/electrochemical compatibility with the lithium anode, owing to the synergistic effect of LLZO-w filler, flexible frameworks, and flame retardants. Consequently, the LiFePO4/Li batteries assembled with AP-GPEs/LLZO-w electrolyte exhibit enhanced cycling performance (87.3% capacity retention after 600 cycles at 1 C) and notable high-rate capacity (93.3 mAh g-1 at 5 C). This work proposes a novel functional superposition strategy for the synthesis of high-performance comprehensive GPEs for LMBs.

[Progress of researches on the antiparasitic activity of antimicrobial peptide LL-37]

Parasitic diseases caused by protozoan and helminth infections are still widespread across the world, notably in tropical and subtropical areas, which threaten the children and adult health. Long-term use of anti-parasitic drugs may result in reduced drug susceptibility and even drug resistance. Antimicrobial peptides have been demonstrated to inhibit parasite growth and development, which has potential antiparasitic values. LL-37, the only human antimicrobial peptide in the cathelicidin family, has been widely investigated. This paper reviews the progress of researches on the antiparasitic activity of LL-37, and discusses the prospects of LL-37 in the research of parasites.

In Situ Construction of LiF-Li3N-Rich Interface Contributed to Fast Ion Diffusion in All-Solid-State Lithium-Sulfur Batteries

All-solid-state lithium-sulfur batteries (ASSLSBs) have attracted wide attention due to their ultrahigh theoretical energy density and the ability of completely avoiding the shuttle effect. However, the further development of ASSLSBs is limited by the poor kinetic properties of the solid electrode interface. It remains a great challenge to achieve good kinetic properties, by common strategies to substitute sulfur-transition metal and organosulfur composites for sulfur without reducing the specific capacity of ASSLSBs. In this study, a sulfur-(Ketjen Black)-(bistrifluoromethanesulfonimide lithium salt) (S-KB-LiTFSI) composite is constructed by introducing LiTFSI into the S-KB composite. The initial discharge capacity reaches up to 1483 mA h g-1, benefited from the improved ionic conductivity and diffusion kinetics of the S-KB-LiTFSI composite, where numerous LiF interphases with a Li3N component are in situ formed during cycling. Combined with DFT calculations, it is found that the migration barriers of LiF and Li3N are much smaller than that of the Li6PS5Cl solid electrolyte. The fast ionic conductors of LiF and Li3N not only enhance the Li+ transfer efficiency but also improve the interfacial stability. Therefore, the assembled ASSLSBs operate stably for 600 cycles at 200 mA g-1, and this study provides an effective strategy for the further development of ASSLSBs.

Scalable and Versatile Metal Ion Solidificated Alginate Hydrogel for Skin Wound Infection Therapy

Bacterial infections in wounds continue to be a major challenge in clinical settings worldwide and represent a significant threat to human health. This work proposes novel expandable and versatile methods for solidifying sodium alginate (SA) with metal ions (such as Fe3+ , Co2+ , Ni2+ , Cu2+ , and Zn2+ ) to create Metal-Alginate (M-Alg) hydrogel with adjustable morphology, composition, and microstructure. It conforms to the wound site, protects against second infection, reduces inflammation, and promotes the healing of infected wounds. Among these hydrogels, Cu-Alginate (Cu-Alg) shows excellent sterilization effect and good efficacy against both gram-positive and gram-negative bacteria, including multidrug-resistant (MDR) strains such as Methicillin-resistant Staphylococcus aureus (MRSA) and Carbapenem-resistant Klebsiella pneumoniae (CRKP) due to its dual antibacterial mechanisms: contact-killing and reactive oxygen species (ROS) burst. Importantly, it exhibits low cytotoxicity and biodegradability. This simple and cost-effective gel-based system has the potential to introduce an innovative approach to the management of wound infection and offers promising new perspectives for the advancement of wound care practice.

Juice Vesicles Bioreactors Technology for Constructing Advanced Carbon-Based Energy Storage

The construction of high-quality carbon-based energy materials through biotechnology has always been an eager goal of the scientific community. Herein, juice vesicles bioreactors (JVBs) bio-technology based on hesperidium (e.g., pomelo, waxberry, oranges) is first reported for preparation of carbon-based composites with controllable components, adjustable morphologies, and sizes. JVBs serve as miniature reaction vessels that enable sophisticated confined chemical reactions to take place, ultimately resulting in the formations of complex carbon composites. The newly developed approach is highly versatile and can be compatible with a wide range of materials including metals, alloys, and metal compounds. The growth and self-assembly mechanisms of carbon composites via JVBs are explained. For illustration, NiCo alloy nanoparticles are successfully in situ implanted into pomelo vesicles crosslinked carbon (PCC) by JVBs, and their applications as sulfur/carbon cathodes for lithium-sulfur batteries are explored. The well-designed PCC/NiCo-S electrode exhibits superior high-rate properties and enhanced long-term stability. Synergistic reinforcement mechanisms on transportation of ions/electrons of interface reactions and catalytic conversion of lithium polysulfides arising from metal alloy and carbon architecture are proposed with the aid of DFT calculations. The research provides a novel biosynthetic route to rational design and fabrication of carbon composites for advanced energy storage.

[The application of full-length urethral preservation without anastomosis in single-port laparoscopic radical prostate cancer]

Objective: To preliminarily examine the feasibility and outcome of single-port laparoscopic radical prostatectomy with full-length urethral preservation (FLUP-SPRP). Method: This study was a prospective case series study. A total of 25 patients with prostate cancer who met the enrollment criteria and agreed to this surgical procedure from March 2022 to December 2022 were collected at the Department of Urology, the Second Affiliated Hospital of Nanjing Medical University. The age of the patients was (67.2±7.6) years (range: 61 to 76 years). This novel procedure was performed by an experienced surgeon who performed single hole radical prostatectomy skillfully. Patient urinary control, tumor control, and related surgical complications after surgery were regularly monitored. Postoperative urinary control was evaluated using the daily amount of urine pad, 0 to 1 piece of urine pad was to restore urinary control, and 0 to 1 piece of pad within 24 hours after catheter removal was immediate urinary control. Result: All prodecures were successfully completed without transit to open surgery. The surgical time was (128.4±22.4) minutes (range: 100 to 145 minutes), the intraoperative blood loss was (68.2±13.7) ml (range: 50 to 120 ml). The urethral injury occurred in 4 cases during surgery and was repaired by sutures. The urinary control recovery rates within 24 hours, 1 week, 4 weeks, and 7 weeks after surgery were 80.0%, 84.0%, 92.0% and 100%, respectively. Postoperative large section pathology revealed 1 case with a positive basal margin of the prostate and negative margins of all prostate glands around the urethra. Postoperative complications included urinary tract infection in 3 cases, urodynia in 2 cases, and acute urinary retention in 1 case. MRI follow-up 3 months after surgery showed normal anatomy of the bladder and urethra. The follow-up values of prostate specific antigen at 3 and 6 months after surgery were less than 0.1 μg/L. Conclusions: The preliminary results of this study indicate that the FLUP-SPRP procedure is safe and feasible. The early results of postoperative urinary control and oncology are as expected.

[17-year study on the curative effect of treatment to prevent the recurrence of hepatitis B in different risk groups after liver transplantation]

Objective: To observe the recurrence condition of hepatitis B in different risk groups after liver transplantation in an attempt to provide useful information on whether to discontinue hepatitis B immunoglobulin (HBIG) in the future at an early stage. Methods: The patient population was divided into high, low-risk, and special groups [especially primary hepatocellular carcinoma (HCC)] according to the guidelines for the prevention and treatment of hepatitis B recurrence after liver transplantation. The recurrence condition and risk factors in this population were observed for hepatitis B. Measurement data were analyzed using a t-test and a rank-sum test. Count data were compared using a χ(2) test between groups. Results: This study finally included 532 hepatitis B-related liver transplant cases. A total of 35 cases had HBV recurrence after liver transplantation, including 34 cases that were HBsAg positive, one case that was HBsAg negative, and 10 cases that were hepatitis B virus (HBV) DNA positive. The overall HBV recurrence rate was 6.6%. The recurrence rate of HBV was 9.2% and 4.8% in the high- and low-risk HBV DNA positive and negative groups before surgery (P = 0.057). Among the 293 cases diagnosed with HCC before liver transplantation, 30 had hepatitis B recurrence after surgery, with a recurrence rate of 10.2%. The independent related factors for the recurrence of hepatitis B in patients with HCC after liver transplantation were HCC recurrence (HR =181.92, 95%CI 15.99~2 069.96, P < 0.001), a high postoperative dose of mycophenolate mofetil dispersible tablets (MMF) ( HR =5.190, 95%CI 1.289~20.889, P = 0.020), and a high dosage of HBIG (HR = 1.012, 95%CI 1.001~1.023, P = 0.035). Among the 239 cases who were non-HCC before liver transplantation, five cases (recurrence rate of 2.1%) arouse postoperative hepatitis B recurrence. Lamivudine was used in all cases, combined with on-demand HBIG prophylaxis after surgery. There was no hepatitis B recurrence in non-HCC patients who treated with entecavir combined with HBIG after surgery. Conclusion: High-barrier-to-resistance nucleotide analogues combined with long-term HBIG have a good effect on preventing the recurrence of hepatitis B after liver transplantation. The discontinuation of HBIG may be considered at an early stage after administration of a high-barrier-to-resistance nucleotide analogue in low-risk patients. Domestically, the HBV infection rate is high, so further research is still required to explore the timing of HBIG discontinuation for high-risk patients, especially those with HCC.

Facile Synthesis of Pre-Lithiated LiTiO2 Nanoparticles for Quick Charge and Long Lifespan Anode in Lithium-Ion Batteries

Titanium dioxide (TiO2) has been widely used as an alternative anodic material for lithium-ion batteries (LIBs) due to its ultrahigh capacity retention and long cycle lifespan. However, the restriction of lithium insertion, intrinsically poor electronic conductivity, and sluggish lithium ionic kinetics of bulk TiO2 hinder their specific capacity and rate performance. Herein, LiTiO2 nanoparticles (NPs) are synthesized via a facile ball milling method by the reaction of anatase TiO2 with LiH. The as-prepared LiTiO2 NPs have strong structural stability and a "zero strain" effect during the repeated intercalation/deintercalation, even at low potential. As anodic materials for LIBs, LiTiO2 NPs exhibit a superior rate performance of ∼100 mA h g-1 at 10C (3350 mA g-1) with a capacity retention of 100% after 1000 cycles, which is 5 times higher than that of the original commercial anatase TiO2 powder. The higher specific capacity of LiTiO2 NPs is attributed to the increased conversion of Ti3+ to Ti2+ on the porous surface of LiTiO2 NPs, which provides a more capacitive contribution. This study not only provides a new fabrication approach toward Ti-based anodes for ultrafast LIBs but also underscores the potential importance of embedding lithium into transition metal oxides as a strategy for boosting their electrochemical performance.

An approach to enhance carbon/polymer interface compatibility for lithium-ion supercapacitors

Developing high-efficiency and easy machining components, as well as high-performance energy storage components, is a pressing issue on the road to economic and social progress. Optimizing the interface compatibility between composites and promoting the efficient utilization of the electrochemical active sites are crucial factors in improving the electrochemical performance of composite electrode materials. To address this challenge, a carbon-based flexible lithium-ion supercapacitor positive material (Polyaniline @ Carbon Foam-Supercritical carbon dioxide (P@C-SC)) is synthesized using commercial melamine foam and aniline monomer. The synthesis process utilizes supercritical fluid technology, effectively solving the interface compatibility problem between the composite materials. Consequently, the electrochemical performance of the composite electrode materials is significantly improved. The supercapacitive properties of this material are investigated in 1 mol/L sulfuric acid (H2SO4) and lithium sulfate (Li2SO4) electrolytes using a three-electrode system. In H2SO4 electrolyte, the material exhibits a working voltage of up to 2.2 V and a specific capacitance of 898F/g (at 1 A/g), resulting in a maximum energy density of 50.8 Wh kg-1. Furthermore, this electrode demonstrates superior lithium storage performance, with a specific capacity of approximately 900 mAh/g (at 1 A/g) and a retention of about 400 mAh/g after 200 cycles, along with a coulomb efficiency of 100%. This work offers insights into the integrated design of composite materials with improved electrochemical properties and interface compatibility, thus providing potential applicability of supercritical fluids in the field of lithium-ion supercapacitors.

Induction Chemotherapy and Toripalimab for Larynx Preservation in Resectable Locally Advanced Laryngeal/Hypopharyngeal Carcinoma: Preliminary Results of INSIGHT Study

PURPOSE/OBJECTIVE(S)

Previous studies have demonstrated excellent pathological response of induction PD-1 inhibitor with chemotherapy for locally advanced head and neck cancer. To our knowledge, there is scarce evidence on induction chemotherapy (ICT) and PD-1 inhibitor in organ preservation for patients (pts) with laryngeal/hypopharyngeal carcinoma. Hence, the aim of this study is to evaluate the efficacy and toxicities of ICT and PD-1inhibitor (Toripalimab) followed by radiotherapy or surgery, for pts with resectable locally advanced laryngeal/hypopharyngeal carcinoma.

MATERIALS/METHODS

This isa single-arm phase II study. Pts with histopathologic confirmed, resectable locally advanced laryngeal/hypopharyngeal squamous cell carcinoma and ECOG PS 0-1 were eligible. Three cycles of ICT (paclitaxel 175 mg/m d1, cisplatin 25 mg/m d1-3) combined with PD-1 inhibitor (Toripalimab 240 mg d0) were given. Response assessment (RECIST 1.1) was performed post-ICT. Patients with complete response (CR)/partial response (PR) of primary tumor received concurrent chemoradiation, followed by maintenance therapy of Toripalimab for eight cycles. Otherwise, patients were referred to surgery, followed by adjuvant radiation (RT)/chemoradiation (CRT), and then maintenance therapy of Toripalimab. The primary endpoint is larynx-preservation (LP) rate at 3 months post-RT. Forty-two patients were planned. Based on a two-stage Fleming design (one-sided α:10%, power: 80%), if at least 22 patients attained LP of the first 27 patients in stage I or at least thirty-two pts attained LP of the 42 patients at the end of stage II, the null hypothesis would be rejected. The cohort would enroll 15 more pts in stage II if 19-21 pts in stage I observed LP, and the study would be terminated if the number of pts with LP were less than 18 in stage I.

RESULTS

A total of 27 pts were enrolled. By the cut-off date Feb 8, 2023, all reached at least 3 months of follow-up post-RT. Median age was 63 (53-74) years with 92.6% male. Hypopharyngeal cancer accounted for 66.7%. There were 74.1% who were T3 to T4, and 77.7% were N2 to N3. Six cases had primary invasion of esophagus and five pts underwent pretreatment tracheostomy. ORR of ICT was 85.2%. Afterward, 21 pts were treated with concurrent CRT, while 6 pts received surgery of primary tumor. At 3 months post-RT, 23 pts attained organ preservation and the LP rate was 85.2%. With a median follow-up of 13.5 months, 1-year OS rate, PFS rate and LP survival rate was 83.1%, 79.5% and 79.4%, respectively. During ICT, 22.2% of pts experienced grade 3-4 treatment-related AEs (TRAEs). The most common grade 3-4 TRAEs were nausea and neutrophil count decreased.

CONCLUSION

The primary endpoint LP rate was met. In this cohort of extensive locally advanced laryngeal/hypopharyngeal carcinoma, ICT and Toripalimab followed by radiotherapy or surgery resulted in satisfactory short-term LP rate and encouraging survival.

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3 -Driven In Situ Polymerization of 1,3-Dioxolane

The use of poly(1,3-dioxolane) (PDOL) electrolyte for lithium batteries has gained attention due to its high ionic conductivity, low cost, and potential for large-scale applications. However, its compatibility with Li metal needs improvement to build a stable solid electrolyte interface (SEI) toward metallic Li anode for practical lithium batteries. To address this concern, this study utilized a simple InCl3 -driven strategy for polymerizing DOL and building a stable LiF/LiCl/LiIn hybrid SEI, confirmed through X-ray photoelectron spectroscopy (XPS) and cryogenic-transmission electron microscopy (Cryo-TEM). Furthermore, density functional theory (DFT) calculations and finite element simulation (FES) verify that the hybrid SEI exhibits not only excellent electron insulating properties but also fast transport properties of Li+ . Moreover, the interfacial electric field shows an even potential distribution and larger Li+ flux, resulting in uniform dendrite-free Li deposition. The use of the LiF/LiCl/LiIn hybrid SEI in Li/Li symmetric batteries shows steady cycling for 2000 h, without experiencing a short circuit. The hybrid SEI also provided excellent rate performance and outstanding cycling stability in LiFePO4 /Li batteries, with a high specific capacity of 123.5 mAh g-1 at 10 C rate. This study contributes to the design of high-performance solid lithium metal batteries utilizing PDOL electrolytes.

The radiomic biomarker in non-small cell lung cancer: 18F-FDG PET/CT characterisation of programmed death-ligand 1 status

AIM

To present an integrated 2-[18F]-fluoro-2-deoxy-d-glucose (18F-FDG) positron-emission tomography (PET)/computed tomography (CT) radiomic characterisation of programmed death-ligand 1 (PD-L1) status in non-small-cell lung cancer (NSCLC).

MATERIALS AND METHODS

In this retrospective study, 18F-FDG PET/CT images and clinical data of 394 eligible patients were divided into training (n=275) and test sets (n=119). Next, the corresponding nodule of interest was segmented manually on the axial CT images by radiologists. After which, the spatial position matching method was used to match the image positions of CT and PET, and radiomic features of the CT and PET images were extracted. Radiomic models were built using five different machine-learning classifiers and the performance of the radiomic models were further evaluated. Finally, a radiomic signature was established to predict the PD-L1 status in patients with NSCLC using the features in the best performing radiomic model.

RESULTS

The radiomic model based on the PET intranodular region determined using the logistic regression classifier preformed best, yielding an area under the receiver operating characteristics curve (AUC) of 0.813 (95% CI: 0.812, 0.821) on the test set. The clinical features did not improve the test set AUC (0.806, 95% CI: 0.801, 0.810). The final radiomic signature for PD-L1 status was consisted of three PET radiomic features.

CONCLUSION

This study showed that an 18F-FDG PET/CT-based radiomic signature could be used as a non-invasive biomarker to discriminate PD-L1-positive from PD-L1-negative in patients with NSCLC.

[Surveillance on dengue vector Aedes albopictus in Ningbo City in 2021]

OBJECTIVE

To analyze the density, distribution and insecticide resistance of Aedes albopictus in Ningbo City in 2021, so as to provide insights into formulation of dengue fever control strategies.

METHODS

Four administrative villages were randomly selected from each county (district) in Ningbo City from April to November, 2021, to investigate the indoor population density of Aedes larvae, and the Breteau index (BI) was calculated. The population density of adult mosquitoes was investigated in residential areas, parks/bamboo forests, waste tire stacking sites/waste stations/construction sites in each county (district). On June 2021, larvae of the natural strain A. albopictus were collected from epidemic sites of dengue fever in Ningbo City in 2018, and raised in laboratory. Then, larvae and female mosquitoes without blood feeding were selected for insecticide resistance bioassays, while insecticide-sensitive strains of A. albopictus served as controls. The resistance of A. albopictus larvae to deltamethrin, beta-cypermethrin, propoxur, temephos and dichlorvos using the impregnation method, and the medium lethal concentration (LC50) and resistance ratio (RR) were calculated. The resistance of adult A. albopictus to beta-cypermethrin, permethrin, deltamethrin, propoxur and malathion was determined using the tube bioassay, and the mosquito mortality was calculated.

RESULTS

A total of 10 072 small water containers from 9 935 households were investigated in Ningbo City in 2021, and there were 1 276 containers with Aedes larvae detected, with an average BI of 12.89. Totally 1 422 mosquito nets were allocated and 954 female A. albopictus were captured, with an average net trapping index of 1.34 mosquitoes/(net·hour). Both larval and adult A. albopictus mosquitoes were found from April to November, and the density of larval A. albopictus peaked in September (BI = 21.21), while the density of adult A. albopictus peaked in August, with a net trapping index of 2.38 mosquitoes/(net·hour). The LC50 values of delta-methrin, beta-cypermethrin, propoxur, temephos and dichlorvos were 0.017 4, 0.000 9, 0.364 1, 0.038 1 mg/L and 0.001 6 mg/L against larvae of natural strains of A. albopicchus, with RRs of 49.66, 25.53, 9.65, 2.24 and 6.06, and the mortality rates of adult mosquitoes were 66.00% (66/100), 69.39% (68/98), 25.00% (25/100), 98.97% (96/97) and 100.00% (98/98) 24 hours post-treatment with 0.08% beta-cypermethrin, 0.03% deltamethrin, 0.4% permethrin, 0.05% propoxur, and 0.5% malathion for 24 h, respectively.

CONCLUSIONS

A. albopictus is widely distributed in Ningbo City, with a high population density and presents high-level resistance to common pyrethroid insecticides. The population density and insecticide resistance of A. albopictus requires to be reinforced.

[Mammary myofibroblastoma: a clinicopathological analysis of fifteen cases]

Objective: To investigate the clinicopathological features, diagnosis and differential diagnosis of breast myofibroblastoma. Methods: The clinicopathological data and prognostic information of 15 patients with breast myofibroblastoma diagnosed at the Department of Pathology of the First Affiliated Hospital of Zhengzhou University, Zhengzhou, China from 2014 to 2022 were collected. Their clinical characteristics, histological subtypes, immunophenotypes and molecular characteristics were analyzed. Results: There were 12 female and 3 male patients, ranging in age from 18 to 78 years, with a median and average age of 52 years. There were 6 cases in the left breast and 9 cases in the right breast, including 12 cases in outer upper quadrant, 2 cases in inner upper quadrant and 1 case in outer lower quadrant. Most of the cases showed a well-defined nodule grossly, including pushing growth under the microscope in 13 cases, being completely separated from the surrounding breast tissue in 1 case, and infiltrating growth in 1 case. Among them, 12 cases were classic subtype and composed of occasional spindle cells with varying intervals of collagen fiber bundles; eight cases had a small amount of fat; one case had focal cartilage differentiation; one case was epithelioid subtype, in which epithelioid tumor cells were scattered in single filing or small clusters; one case was schwannoma-like subtype, and the tumor cells were arranged in a significant palisade shape, resembling schwannoma, and one case was invasive leiomyoma-like subtype, in which the tumor cells had eosinophilic cytoplasm and were arranged in bundles, and infiltrating into the surrounding mammary lobules like leiomyoma. Immunohistochemical studies showed that the tumor cells expressed desmin (14/15) and CD34 (14/15), as well as ER (15/15) and PR (15/15). Three cases with histologic subtypes of epithelioid subtype, schwannoma-like subtype and infiltrating leiomyoma-like subtype showed RB1 negative immunohistochemistry. Then FISH was performed to detect RB1/13q14 gene deletion, and identified RB1 gene deletion in all three cases. Fifteen cases were followed up for 2-100 months, and no recurrence was noted. Conclusions: Myofibroblastoma is a rare benign mesenchymal tumor of the breast. In addition to the classic type, there are many histological variants, among which the epithelioid subtype is easily confused with invasive lobular carcinoma. The schwannoma-like subtype is similar to schwannoma, while the invasive subtype is easily misdiagnosed as fibromatosis-like or spindle cell metaplastic carcinoma. Therefore, it is important to recognize the various histological subtypes and clinicopathological features of the tumor for making correct pathological diagnosis and rational clinical treatment.

Effect of different doses of recombinant human growth hormone therapy on children with growth hormone deficiency: a retrospective observational study

OBJECTIVE

The aim of this study was to explore the effects of different doses of recombinant human growth hormone (rhGH) treatment on children with growth hormone deficiency (GHD).

PATIENTS AND METHODS

Medical records of 174 GHD patients admitted to our hospital from June 2019 to January 2022 were retrospectively evaluated. A total of 136 patients met the inclusion criteria, of which 70 received 0.1 U/ (kg·d) (low-dose group) and 66 received 0.2 U/ (kg·d) dose of rhGH treatment (high-dose group). Growth and development status [height, weight, height standard deviation (HtSDS), growth rate], bone age, bone density, speed of sound (SOS) as distal radius bone mass, biochemical indicators of growth and development [insulin-like growth factor-1 (IGF-1), insulin-like growth factor binding protein 3 (IGFBP-3)], growth hormone (GH) levels and incidence of adverse reactions were collected and compared between the two groups before and after one year of the treatment.

RESULTS

After the treatment, height, weight, HtSDS, and growth rate of the two groups increased compared to before the treatment and were significantly higher in the high-dose group than in the low-dose group (p<0.05). After one year of treatment, the following observations were made: the bone age of the two groups increased compared to the baseline values and was higher in the high-dose group compared to the low-dose group (p<0.05). The SOS of the two groups decreased but was significantly higher in the high-dose group compared to the low-dose group (p<0.05). Serum levels of IGF-1, IGFBP-3, and GH in both groups increased compared to the baseline values and were higher in the high-dose group than in the low-dose group (p<0.05). There was no significant difference in the incidence of adverse reactions between the high-dose group (8.6%) and the low-dose group (6.1%) (p>0.05).

CONCLUSIONS

High-dose rhGH treatment for GHD is safe and can more effectively upregulate IGF-1, IGFBP-3, and GH, and promote the growth and development of children.

Measurement of Direct-Photon Cross Section and Double-Helicity Asymmetry at sqrt[s]=510 GeV in p[over →]+p[over →] Collisions

We present measurements of the cross section and double-helicity asymmetry A_{LL} of direct-photon production in p[over →]+p[over →] collisions at sqrt[s]=510  GeV. The measurements have been performed at midrapidity (|η|<0.25) with the PHENIX detector at the Relativistic Heavy Ion Collider. At relativistic energies, direct photons are dominantly produced from the initial quark-gluon hard scattering and do not interact via the strong force at leading order. Therefore, at sqrt[s]=510  GeV, where leading-order-effects dominate, these measurements provide clean and direct access to the gluon helicity in the polarized proton in the gluon-momentum-fraction range 0.02<x<0.08, with direct sensitivity to the sign of the gluon contribution.

LiF-Rich Interfacial Protective Layer Enables Air-Stable Lithium Metal Anodes for Dendrite-Free Lithium Metal Batteries

Lithium (Li) metal is considered as a promising anode candidate for high-energy-density batteries. However, the high reactivity of Li metal leads to poor air stability, limiting its practical application. Additionally, the interfacial instability, such as dendrite growth and an unstable solid electrolyte interphase layer, further complicates its utilization. Herein, a dense lithium fluoride (LiF)-rich interfacial protective layer is constructed on the Li surface through a simple reaction between Li and fluoroethylene carbonate (denoted as LiF@Li). The LiF-rich interfacial protective layer consists of both organic (ROCO₂Li and C-F-containing species, which only exist on the outer layer) and inorganic (LiF and Li₂CO₃, distribute throughout the layer) components with a thickness of ∼120 nm. Specifically, chemically stable LiF and Li₂CO₃ play an important role in blocking air and hence improve the air durability of LiF@Li anodes. Notably, LiF with high Li⁺ diffusivity facilitates uniform Li⁺ deposition, while organic components with high flexibility relieve volume change upon cycling, thereby enhancing the dendrite inhibition capacity of LiF@Li. Consequently, LiF@Li exhibits remarkable stability and excellent electrochemical performance in both symmetric cells and LiFePO₄ full cells. Moreover, LiF@Li maintains its initial color and morphology even after air exposure for 30 min, and the air-exposed LiF@Li anode still retains its superior electrochemical performance, further establishing its outstanding air-defendable capability. This work proposes a facile approach in constructing air-stable and dendrite-free Li metal anodes toward reliable Li metal batteries.

Solid-State Electrolytes in Lithium-Sulfur Batteries: Latest Progresses and Prospects

Solid-state lithium-sulfur batteries (SSLSBs) have attracted tremendous research interest due to their large theoretical energy density and high safety, which are highly important indicators for the development of next-generation energy storage devices. Particularly, safety and "shuttle effect" issues originating from volatile and flammable liquid organic electrolytes can be fully mitigated by switching to a solid-state configuration. However, their road to thecommercial application is still plagued with numerous challenges, most notably the intrinsic electrochemical instability of solid-state electrolytes (SSEs) materials and their interfacial compatibility with electrodes and electrolytes. In this review, a critical discussion on the key issues and problems of different types of SSEs as well as the corresponding optimization strategies are first highlighted. Then, the state-of-the-art preparation methods and properties of different kinds of SSE materials, and their manufacture, characterization and performance in SSLSBs are summarized in detail. Finally, a scientific outlook for the future development of SSEs and the avenue to commercial application of SSLSBs is also proposed.

Stable LiF-Rich Electrode-Electrolyte Interface toward High-Voltage and High-Energy-Density Lithium Metal Solid Batteries

Lithium-rich layered oxide (LRLO) materials have attracted significant attention due to their high specific capacity, low cost, and environmental friendliness. However, owing to its unique capacity activation mechanism, the release of lattice oxygen during the first charge process leads to a series of problems, such as severe voltage decay, poor cycle stability, and poor rate performance. Herein, a fluorinated quasi-solid-state electrolyte (QSSE) via a simple thermal polymerization method toward lithium metal batteries with LRLO materials is reported. The well-designed QSSE exhibits an ionic conductivity of 6.4 × 10^-4 S cm^-1 at 30 °C and a wide electrochemical stable window up to 5.6 V. Most importantly, XPS spectra demonstrate the generation of a LiF-rich electrode-electrolyte interface (EEI), where the in situ generated LiF provides strong protection against the structural degradation of LRLO materials and directs the uniform plating/stripping behaviors of lithium-ions to inhibit the formation of lithium dendrites. As a result, LRLO/QSSE/Li batteries exhibit excellent rate performance and demonstrate a large initial capacity for 209.7 mA h g^-1 with a capacity retention of 80.8% after 200 cycles at 0.5C. This work provides a new insight for the LiF-rich EEI design of safe, high-performance quasi-solid-state lithium metal batteries.

[Zuogui Jiangtang Jieyu Decoction promotes neural stem cell self-renewal and activates Shh signaling in the hippocampal dentate gyrus of diabetic rats with depression]

OBJECTIVE

To investigate the effect of Zuogui Jiangtang Jieyu Decoction (ZJJ) on Shh signaling and self-renewal of neural stem cells in the hippocampal dentate gyrus of diabetic rats with depression.

METHODS

Diabetic rat models with depression were randomly divided into model group, positive drug (metformin + fluoxetine) group, and low-, medium-, and high-dose ZJJ groups (n=16), with normal SD rats as the control group. The positive drugs and ZJJ were administered by gavage, and the rats in the control and model groups were given distilled water. After the treatment, blood glucose level was detected using test strips, and behavioral changes of the rats were assessed by forced swimming test and water maze test. ELISA was used to examine the serum level of leptin; The expressions of nestin and Brdu proteins in the dentate gyrus of the rats were detected using immunofluorescence assay, and the expressions of self-renewal marker proteins and Shh signaling proteins were detected using Western blotting.

RESULTS

The diabetic rats with depression showed significantly increased levels of blood glucose and leptin (P < 0.01) and prolonged immobility time in forced swimming test (P < 0.01) and increased stage climbing time with reduced stage seeking time and stage crossings in water maze test (P < 0.01). The expressions of nestin and Brdu in the dentate gyrus, the expressions of cyclin D1, SOX2, Shh, Ptch1, Smo in the hippocampus and the nuclear expression of Gli-1 were decreased (P < 0.01) while hippocampal Gli-3 expression was increased significantly (P < 0.01) in the rat models. Treatment of rat models with high-dose ZJJ significantly reduced the blood glucose (P < 0.01) and leptin level (P < 0.05) and improved their performance in behavioral tests (P < 0.01). The treatment also obviously increased the expressions of nestin, Brdu, cyclin D1, SOX2, Shh, Ptch1, and Smo and the nuclear expression of Gli-1 in the dentate gyrus (P < 0.01) and reduced hippocampal expression of Gli-3 (P < 0.05) in the rat models.

CONCLUSION

ZJJ can significantly improve the self-renewal ability of neural stem cells and activate Shh signaling in dentate gyrus of diabetic rats with depression.

Three-dimensional polyimide nanofiber framework reinforced polymer electrolyte for all-solid-state lithium metal battery

The replacement of traditional liquid electrolytes with polyethylene oxide (PEO) based composite polymer electrolytes (CPEs) is an important strategy to address the current flammability and explosiveness of lithium batteries since PEO CPEs have high flexibility, excellent processability and moderate cost. However, the insufficient ionic conductivity and inferior mechanical strength of PEO CPEs do not suit the operating requirements of all-solid-state lithium metal batteries at room temperature. Herein, three-dimensional (3D) framework composed of interweaved high-modulus polyimide (PI) nanofibers along with functional succinonitrile (SN) plasticizers are employed to synergistically reinforce the ionic conductivity and mechanical strength of PEO CPEs. Impressively, benefitting from the synergistic effects of 3D PI framework and SN plasticizer, PI-PEO-SN CPEs exhibits high ionic conductivity of 1.03 × 10^-4 S cm^-1 at 30 °C, remarkable tensile strength of 4.52 MPa, and superior Li dendrites blocking ability (>400 h at 0.1 mA cm^-2). Such favorable features of PI-PEO-SN CPEs endow LiFePO₄/PI-PEO-SN/Li solid-state prototype cells with high specific capacity (151.2 mA h g^-1 at 0.2 C), long cycling lifespan (>150 cycles with 91.7 % capacity retention), and superior operating safety even under bending, folding and cutting harsh conditions. This work will pave the avenues to design and fabricate new high-performance PEO CPEs for the high energy density and safety all-solid-state batteries.

[HSDL2 overexpression promotes rectal cancer progression by regulating cancer cell cycle and promoting cell proliferation]

OBJECTIVE

To analyze the expression of hydroxysteroid dehydrogenase like 2 (HSDL2) in rectal cancer tissues and the effect of changes in HSDL2 expression level on proliferation of rectal cancer cells.

METHODS

Clinical data and tissue samples of 90 patients with rectal cancer admitted to our hospital from January 2020 to June 2022 were collected from the prospective clinical database and biological specimen database. The expression level of HSDL2 in rectal cancer and adjacent tissues was detected by immunohistochemistry, and based on the median level of HSDL2 expression, the patients were divided into high expression group (n=45) and low expression group (n=45) for analysis the correlation between HSDL2 expression level and the clinicopathological parameters. GO and KEGG enrichment analyses were performed to explore the role of HSDL2 in rectal cancer progression. The effects of changes in HSDL2 expression levels on rectal cancer cell proliferation, cell cycle and protein expressions were investigated in SW480 cells with lentivirus-mediated HSDL2 silencing or HSDL2 overexpression using CCK-8 assay, flow cytometry and Western blotting.

RESULTS

The expressions of HSDL2 and Ki67 were significantly higher in rectal cancer tissues than in the adjacent tissues (P < 0.05). Spearman correlation analysis showed that the expression of HSDL2 protein was positively correlated with Ki67, CEA and CA19-9 expressions (P < 0.01). The rectal cancer patients with high HSDL2 expressions had significantly higher likelihood of having CEA ≥5 μg/L, CA19-9 ≥37 kU/L, T3-4 stage, and N2-3 stage than those with a low HSDL2 expression (P < 0.05). GO and KEGG analysis showed that HSDL2 was mainly enriched in DNA replication and cell cycle. In SW480 cells, HSDL2 overexpression significantly promoted cell proliferation, increased cell percentage in S phase, and enhanced the expression levels of CDK6 and cyclinD1 (P < 0.05), and HSDL2 silencing produced the opposite effects (P < 0.05).

CONCLUSION

The high expression of HSDL2 in rectal cancer participates in malignant progression of the tumor by promoting the proliferation and cell cycle progress of the cancer cells.

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries

The implementation of all-solid-state lithium batteries (ASSLBs) is regarded as an important step toward the next-generation energy storage systems. The sulfide solid-state electrolyte (SSE) is a promising candidate for ASSLBs due to its high ionic conductivity and easy processability. However, the interface stability of sulfide SSEs toward high-capacity cathodes like nickel-rich layered cathodes is limited by the interfacial side reaction and narrow electrochemical window of the electrolyte. Herein, we propose introducing the halide SSE Li₃InCl₆ (LIC) with high (electro)chemical stability and superior Li⁺ conductivity to act as an ionic conductive additive in the Ni-rich LiNi_0.8Co_0.1Mn_0.1O₂ (NCM) cathode mixture through a slurry coating, aiming to build a stable cathode-electrolyte interface. This work demonstrates that the sulfide SSE Li_5.5PS_4.5Cl_1.5 (LPSCl) is chemically incompatible with the NCM cathode, and the indispensable role of the substitution of LPSCl with LIC in enhancing the interfacial compatibility and oxidation stability of the electrolyte is highlighted. Accordingly, this new configuration shows superior electrochemical performance at room temperature. It shows a high initial discharge capacity (136.3 mA h g^-1 at 0.1C), cycling performance (77.4% capacity retention at the 100th cycle), and rate capability (79.3 mA h g^-1 at 0.5C). This work paves the way for investigating interfacial challenges regarding high-voltage cathodes and provides new insights into possible interface engineering strategies.

[Progress of researches on antimalarial peptides]

Malaria remains a major global public health concern, and nearly half of the global populations are still at risk of malaria infection. However, continuous emergence and spread of drug-resistant malaria parasite strains lead to ineffectiveness of conventional antimalarials. Therefore, development of novel antimalarial agents is of urgent need for malaria elimination. As an important component of the host natural immune defense system, antibacterial peptides provide the first line of defense against pathogenic invasion, and the mechanism of preferentially attacking the cell membrane makes them difficult to develop drug resistance. Antimicrobial peptides are therefore considered as a promising candidate for novel antimalarial agents. This review summarizes the advances in researches on antimicrobial peptides with antimalarial actions and discusses the potential of antimalarial peptides as novel antimalarials.

New Chemical Synthesis Strategy To Construct a Silicon/Carbon Nanotubes/Carbon-Integrated Composite with Outstanding Lithium Storage Capability

The Si/C anode is one of the most promising candidate materials for the next-generation lithium-ion batteries (LIBs). Herein, a silicon/carbon nanotubes/carbon (Si/CNTs/C) composite is in situ synthesized by a one-step reaction of magnesium silicide, calcium carbonate, and ferrocene. Transmission electron microscopy reveals that the growth of CNTs is attributed to the catalysis of iron atoms derived from the decomposition of ferrocene. In comparison to a Si/C composite, the cycle stability of the Si/CNTs/C composite can obviously be improved as an anode for LIBs. The enhanced performance is mainly attributed to the following factors: (i) the perfect combination of Si nanoparticles and in situ grown CNTs achieves high mechanical integrity and good electrical contact; (ii) Si nanoparticles are entangled in the CNT cage, effectively reducing the volume expansion upon cycling; and (iii) in situ grown CNTs can improve the conductivity of composites and provide lithium ion transport channels. Moreover, the full cell constructed by a LiFePO₄ cathode and Si/CNTs/C anode exhibits excellent cycling stability (137 mAh g^-1 after 300 cycles at 0.5 C with a capacity retention rate of 91.2%). This work provides a new way for the synthesis of a Si/C anode for high-performance LIBs.

[Fibroma of tendon sheath: a clinicopathological and genetic analysis of 134 cases]

Objective: To investigate the clinicopathological features, immunophenotypes and molecular genetics of fibroma of tendon sheath (FTS). Methods: One hundred and thirty-four cases of FTS or tenosynovial fibroma diagnosed in the Department of Pathology, West China Hospital, Sichuan University, Chengdu, China from January 2008 to April 2019 were selected. The clinical and histologic features of these cases were retrospectively reviewed. Immunohistochemistry, fluorescence in situ hybridization (FISH) and reverse transcription-polymerase chain reaction (RT-PCR) were performed on the above cases. Results: There were a total of 134 cases of FTS, including 67 males and 67 females. The patients' median age was 38 years (ranged from 2 to 85 years). The median tumor size was 1.8 cm (ranged from 0.1 to 6.8 cm). The most common site was the upper extremity (76/134, 57%). Follow-up data was available in 28 cases and there was no detectable recurrence. Classic FTS (114 cases) were well-defined and hypocellular. A few spindle-shaped fibroblasts were scattered in the dense collagenous sclerotic stroma. Characteristically elongated slit-like spaces or thin-walled vessels were observed. Most of cellular FTSs (20 cases) were well-defined and the area with increased cellularity of the spindle cells coexisted with classic FTS. There were occasional mitotic figures, but no atypical mitotic figures. Immunohistochemistry was performed in 8 cases of classic FTS and most cases were positive for SMA (5/8). Immunohistochemistry was also performed in 13 cases of cellular FTS and showed 100% positive rate for SMA. FISH was conducted on 20 cases of cellular FTS and 32 cases of classical FTS. USP6 gene rearrangement was found in 11/20 of cellular FTS. Among 12 cases of CFTS with nodular fasciitis (NF)-like morphological feature, 7 cases showed USP6 gene rearrangement. The rearrangement proportion of USP6 gene in cellular FTS without NF-like morphological features was 4/8. By contrast, 3% (1/32) of the classic FTS showed USP6 gene rearrangement. RT-PCR was performed in those cases with detected USP6 gene rearrangement and sufficient tissue samples for RT-PCR. The MYH9-USP6 fusion gene was detected in 1 case (1/8) of the cellular FTSs, while no target fusion partner was detected in the classic FTS. Conclusions: FTS is a relatively rare benign fibroblastic or myofibroblastic tumor. Our study and recent literature find that some of the classic FTS also show USP6 gene rearrangements, suggesting that classical FTS and cellular FTS are likely to be at different stages of the same disease (spectrum). FISH for USP6 gene rearrangement may be used as an important auxiliary diagnostic tool in distinguishing FTS from other tumors.

Single-photon detection using high-temperature superconductors

The detection of individual quanta of light is important for quantum communication, fluorescence lifetime imaging, remote sensing and more. Due to their high detection efficiency, exceptional signal-to-noise ratio and fast recovery times, superconducting-nanowire single-photon detectors (SNSPDs) have become a critical component in these applications. However, the operation of conventional SNSPDs requires costly cryocoolers. Here we report the fabrication of two types of high-temperature superconducting nanowires. We observe linear scaling of the photon count rate on the radiation power at the telecommunications wavelength of 1.5 μm and thereby reveal single-photon operation. SNSPDs made from thin flakes of Bi₂Sr₂CaCu₂O_8+δ exhibit a single-photon response up to 25 K, and for SNSPDs from La_1.55Sr_0.45CuO₄/La₂CuO₄ bilayer films, this response is observed up to 8 K. While the underlying detection mechanism is not fully understood yet, our work expands the family of materials for SNSPD technology beyond the liquid helium temperature limit and suggests that even higher operation temperatures may be reached using other high-temperature superconductors.

Circ_0002111/miR-134-5p/FSTL1 signal axis regulates tumor progression and glycolytic metabolism in papillary thyroid carcinoma cells

BACKGROUND

Circular RNAs (circRNAs) have essential roles in the malignant progression of papillary thyroid carcinoma (PTC). Circ_0002111 was reported to facilitate cell proliferation and invasion abilities in PTC. This study was performed to explore the regulatory mechanism of circ_0002111 in PTC progression.

METHODS

Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) was used for the level detection of circ_0002111, microRNA-134-5p (miR-134-5p) and Follistatin Like 1 (FSTL1). Cell proliferation was assessed by 3-(4, 5-dimethylthiazol-2-y1)-2, 5-diphenyl tetrazolium bromide (MTT) assay, EdU assay and colony formation assay. Cell migration ability was determined by transwell assay. Glycolysis was analyzed by extracellular acidification rate (ECAR), oxygen consumption rate (OCR), glucose consumption and lactate production. The protein quantification was performed through western blot. Xenograft tumor assay was used for the functional analysis of circ_0002111 in vivo. The target interaction was confirmed by dual-luciferase reporter assay and RNA pull-down assay.

RESULTS

The significant upregulation of circ_0002111 was detected in PTC samples and cells. PTC cell proliferation, migration and glycolytic metabolism were suppressed after circ_0002111 downregulation. PTC tumorigenesis in vivo was also inhibited by circ_0002111 knockdown. In addition, circ_0002111 could target miR-134-5p and si-circ_0002111#1-induced inhibition of PTC progression was relieved by miR-134-5p expression downregulation. Furthermore, FSTL1 was a target gene for miR-134-5p and miR-134-5p served as a tumor repressor in PTC by targeting FSTL1. Moreover, circ_0002111 could increase the FSTL1 level via sponging miR-134-5p.

CONCLUSION

All results indicated that circ_0002111 promoted the malignant behaviors of PTC cells partly by regulating the miR-134-5p/FSTL1 molecular network.

The feasibility of a novel computer-aided classification system for the characterisation and diagnosis of breast masses on ultrasound: a single-centre preliminary test study

AIM

To introduce a novel computer-aided classification (CAC) system and investigate the feasibility of characterising and diagnosing breast masses on ultrasound (US).

MATERIALS AND METHODS

A total of 246 breast masses were included. US features and the final assessment categories of the breast masses were analysed by a radiologist and the CAC system according to the Breast Imaging Reporting and Data System (BI-RADS) lexicon. The CAC system evaluated the BI-RADS assessment from the fusion of multi-view and colour Doppler US images without (SmartBreast) or with combining clinical variables (m-CAC system). The diagnostic performance and agreement of US characteristics between the radiologist and the CAC system were compared.

RESULTS

The agreement between the radiologist and the CAC system was substantial for mass shape (κ = 0.673), orientation (κ = 0.682), margin (κ = 0.622), posterior features (κ = 0.629), calcifications in a mass (κ = 0.709) and vascularity (κ = 0.745), fair for echo pattern (κ = 0.379), and moderate for BI-RADS assessment (κ = 0.575). With BI-RADS 4a as the cut-off value, the specificity (52.5% versus 25%, p<0.0001) and accuracy (73.98% versus 62.6%, p=0.0002) of the m-CAC system were improved without significant loss of sensitivity (94.44% versus 98.41%, p=0.1250) compared with the SmartBreast. The m-CAC system showed similar specificity (52.5% versus 45.83%, p=0.2430) and accuracy (73.98% versus 73.58%, p=1.0000) as the radiologist, but a lower sensitivity (94.44% versus 100%, p=0.0156).

CONCLUSION

The CAC system showed an acceptable agreement with the radiologist for characterisation of breast lesions. It has the potential to mimic the decision-making behaviour of radiologists for the classification of breast lesions.

Fabrication and Characterization of Carbon Nanotube Filled PDMS Hybrid Membranes for Enhanced Ethanol Recovery

Ethanol separation via the pervaporation process has shown growing application potential in solvent recovery and the bioethanol industry. In the continuous pervaporation process, polymeric membranes such as hydrophobic polydimethylsiloxane (PDMS) have been developed to enrich/separate ethanol from dilute aqueous solutions. However, its practical application remains largely limited due to the relatively low separation efficiency, especially in selectivity. In view of this, hydrophobic carbon nanotube (CNT) filled PDMS mixed matrix membranes (MMMs) aimed at high-efficiency ethanol recovery were fabricated in this work. The filler K-MWCNTs was prepared by functionalizing MWCNT-NH₂ with epoxy-containing silane coupling agent (KH560) to improve the affinity between fillers and PDMS matrix. With K-MWCNT loading increased from 1 wt % to 10 wt %, membranes showed higher surface roughness and water contact angle was improved from 115° to 130°. The swelling degree of K-MWCNT/PDMS MMMs (2 wt %) in water were also reduced from 10 wt % to 2.5 wt %. Pervaporation performance for K-MWCNT/PDMS MMMs under varied feed concentrations and temperatures were evaluated. The results supported that the K-MWCNT/PDMS MMMs at 2 wt % K-MWCNT loading showed the optimum separation performance (compared with pure PDMS membranes), with the separation factor improved from 9.1 to 10.4, and the permeate flux increased by 50% (40-60 °C, at 6 wt % feed ethanol concentration). This work provides a promising method for preparing a PDMS composite with both high permeate flux and selectivity, which showed great potential for bioethanol production and alcohol separation in industry.

Effect of Collagen-Reactive Functional Monomer on Etch-and-Rinse Adhesives

In this study, we evaluated a novel functional monomer (4-formylphenyl acrylate [FA]) that can specifically and covalently bind to the dentin collagen matrix as a potential alternative hydrophobic diluent-like monomer for improving the durability of dentin bonding. Experimental adhesives with different FA contents (0%, 10%, 20%, and 30%) were evaluated as partial substituents for the hydrophilic monomer 2-hydroxyethyl methacrylate, with the commercial adhesive One-Step (Bisco, Inc.) employed as the positive control. Their degree of conversion, viscosity, hydrophobicity, mechanical properties, and water absorption/solubility were measured as the comprehensive characterization. In situ zymographic assays were performed to determine the extent to which FA inhibits the endogenous hydrolytic activity of dentin. Finally, the bonding performances of the novel adhesives were evaluated with microtensile strength tests and scanning electron microscopy. The results showed that the incorporation of FA significantly improved the mobility of experimental adhesives attributable to the dilution property of FA. In contrast to the possible compromised rate of polymerization by hydroxyethyl methacrylate, FA exhibited typical characteristics of favorable copolymerization with polymerizable monomers in adhesives and improved the degree of conversion of experimental adhesives. The rigidity and hydrophobic properties of the phenyl framework of the FA molecule conferred superior mechanical properties and hydrolysis resistance to the novel experimental adhesives. An inhibitory effect on gelatinolytic activities within the hybrid layer was also observed in the in situ zymographic assays, even at a low FA concentration (10%). In conjunction with the significantly improved infiltration found via scanning electron microscopy, the experimental adhesives containing FA possessed significantly better-maintained microtensile strength, even after aging. Thus, the incorporation of this novel monomer endowed the experimental adhesives with multiple enhanced functionalities. These remarkable advantages highlight the suitability of the monomer for further applications in clinical practice.

Exploration of 68Ga-labelled prostate-specific membrane antigen-11 PET/CT parameters for identifying PBRM1 status in primary clear cell renal cell carcinoma

AIM

To investigate the predictive value of ⁶⁸Ga-labelled prostate-specific membrane antigen-11 (⁶⁸Ga-PSMA-11) integrated positron-emission tomography (PET)/computed tomography (CT) in PBRM1-deficient clear cell renal cell carcinoma (ccRCC).

MATERIALS AND METHODS

A total of 41 patients with ccRCC, were enrolled retrospectively and underwent ⁶⁸Ga-PSMA-11 PET/CT preoperatively. Radiological parameters, including CT attenuation value and maximum standard uptake value (SUVmax), were derived. Immunohistochemical and multiple immunofluorescences staining were performed to evaluate the PBRM1 status and immune response. The predictive value of imaging factors was analysed using a receiver operator characteristic curve analysis. Univariate and multivariate logistic regression analyses were used to investigate the relationship between clinical and radiological variables and PBRM1 status.

RESULTS

A total of 41 patients were included in this study, with 14 patients having PBRM1-deficient status. The tumour diameter on imaging and SUVmax differed significantly in patients with different PBRM1 expression statuses and no difference in CT attenuation was identified. Univariate and multivariate logistic regression analyses showed SUVmax was an obvious predictor for identification of PBRM1-deficient tumours. In addition, PBRM1-deficient tumours tended to be accompanied by greater cytotoxic T-cell infiltration, although most of them were in an exhausted state.

CONCLUSIONS

⁶⁸Ga-PSMA-11 PET/CT could be used to discriminate invasive PBRM1-deficient ccRCC.

[Cryptic COL1A1-PDGFB fusion in dermatofibrosarcoma protuberans: a clinicopathological and genetic analysis]

Objective: To investigate the clinicopathological and cytogenetic features of cryptic COL1A1-PDGFB fusion dermatofibrosarcoma protuberans (CC-DFSP). Methods: Three cases of CC-DFSP diagnosed in West China Hospital, Sichuan University, Chengdu, China from January 2021 to September 2021 were studied. Immunohistochemistry for CD34 and other markers, fluorescence in situ hybridization (FISH) for PDGFB, COL1A1-PDGFB and COL1A1, next-generation sequencing (NGS), reverse-transcriptase polymerase chain reaction (RT-PCR) and Sanger sequencing were performed. Results: There were three cases of CC-DFSP, including two females and one male. The patients were 29, 44 and 32 years old, respectively. The sites were abdominal wall, caruncle and scapula. Microscopically, they were poorly circumscribed. The spindle cells of the tumors infiltrated into the whole dermis or subcutaneous tissues, typically arranging in a storiform pattern. Immunohistochemically, the neoplastic cells exhibited diffuse CD34 expression, but were negative for S-100, SMA, and Myogenin. Loss of H3K27me3 was not observed in the tumor cells. The Ki-67 index was 10%-15%. The 3 cases were all negative for PDGFB rearrangement and COL1A1-PDGFB fusion, whereas showing unbalanced rearrangement for COL1A1. Case 1 showed a COL1A1 (exon 31)-PDGFB (exon 2) fusion using NGS, which was further validated through RT-PCR and Sanger sequencing. All patients underwent extended surgical resection. Except for case 3 with recurrence 2 years after surgical resection, the other 2 cases showed no recurrence or metastasis during the follow-up. Conclusions: FISH has shown its validity for detecting PDGFB rearrangement and COL1A1-PDGFB fusion and widely applied in clinical detection. However, for cases with negative routine FISH screening that were highly suspicious for DFSPs, supplementary NGS or at least COL1A1 break-apart FISH screening could be helpful to identify cryptic COL1A1-PDGFB fusions or other variant fusions.