1
|
Extensional rheology of anode slurries for li-ion batteries containing natural and synthetic graphite. J Colloid Interface Sci 2024; 663:508-517. [PMID: 38422976 DOI: 10.1016/j.jcis.2024.02.152] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2023] [Revised: 02/10/2024] [Accepted: 02/19/2024] [Indexed: 03/02/2024]
Abstract
Processing of electrode slurry, which is highly non-Newtonian fluid, is a critical step in the mass production of lithium-ion batteries (LIBs). While extensional flow plays an important role in the electrode slurry processes such as coating, most previous studies have focused only on the shear rheology, due to the lack of a reliable method to measure the extensional rheological properties of the slurry. Here, it is demonstrated that the extensional rheological properties of the anode slurries can be successfully characterized using the stop-flow-dripping-onto-substrate/capillary break-up rheometry (SF-DoS/CaBER). Using this system, it is observed that the extensional rheology of the anode slurry is significantly affected by the blend ratio of the natural and synthetic graphite, as well as the binder and conductive concentrations. Furthermore, the shear rheology-based model predicts much shorter pinch-off times than those measured experimentally, indicating that the yield-stress of the anode slurry is much larger in extensional flow than in shear flow.
Collapse
|
2
|
Highly Efficient Nitrogen-Fixing Microbial Hydrogel Device for Sustainable Solar Hydrogen Production. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2306092. [PMID: 37739451 DOI: 10.1002/adma.202306092] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/23/2023] [Revised: 09/20/2023] [Indexed: 09/24/2023]
Abstract
Conversion of sunlight and organic carbon substrates to sustainable energy sources through microbial metabolism has great potential for the renewable energy industry. Despite recent progress in microbial photosynthesis, the development of microbial platforms that warrant efficient and scalable fuel production remains in its infancy. Efficient transfer and retrieval of gaseous reactants and products to and from microbes are particular hurdles. Here, inspired by water lily leaves floating on water, a microbial device designed to operate at the air-water interface and facilitate concomitant supply of gaseous reactants, smooth capture of gaseous products, and efficient sunlight delivery is presented. The floatable device carrying Rhodopseudomonas parapalustris, of which nitrogen fixation activity is first determined through this study, exhibits a hydrogen production rate of 104 mmol h-1 m-2 , which is 53 times higher than that of a conventional device placed at a depth of 2 cm in the medium. Furthermore, a scaled-up device with an area of 144 cm2 generates hydrogen at a high rate of 1.52 L h-1 m-2 . Efficient nitrogen fixation and hydrogen generation, low fabrication cost, and mechanical durability corroborate the potential of the floatable microbial device toward practical and sustainable solar energy conversion.
Collapse
|
3
|
High blood viscosity in acute ischemic stroke. Front Neurol 2023; 14:1320773. [PMID: 38107646 PMCID: PMC10723952 DOI: 10.3389/fneur.2023.1320773] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2023] [Accepted: 11/07/2023] [Indexed: 12/19/2023] Open
Abstract
Background The changes in blood viscosity can influence the shear stress at the vessel wall, but there is limited evidence regarding the impact on thrombogenesis and acute stroke. We aimed to investigate the effect of blood viscosity on stroke and the clinical utility of blood viscosity measurements obtained immediately upon hospital arrival. Methods Patients with suspected stroke visiting the hospital within 24 h of the last known well time were enrolled. Point-of-care testing was used to obtain blood viscosity measurements before intravenous fluid infusion. Blood viscosity was measured as the reactive torque generated at three oscillatory frequencies (1, 5, and 10 rad/sec). Blood viscosity results were compared among patients with ischemic stroke, hemorrhagic stroke, and stroke mimics diagnosed as other than stroke. Results Among 112 enrolled patients, blood viscosity measurements were accomplished within 2.4 ± 1.3 min of vessel puncture. At an oscillatory frequency of 10 rad/sec, blood viscosity differed significantly between the ischemic stroke (24.2 ± 4.9 centipoise, cP) and stroke mimic groups (17.8 ± 6.5 cP, p < 0.001). This finding was consistent at different oscillatory frequencies (134.2 ± 46.3 vs. 102.4 ± 47.2 at 1 rad/sec and 39.2 ± 11.5 vs. 30.4 ± 12.4 at 5 rad/sec, Ps < 0.001), suggesting a relationship between decreases in viscosity and shear rate. The area under the receiver operating curve for differentiating cases of stroke from stroke mimic was 0.79 (95% confidence interval, 0.69-0.88). Conclusion Patients with ischemic stroke exhibit increases in whole blood viscosity, suggesting that blood viscosity measurements can aid in differentiating ischemic stroke from other diseases.
Collapse
|
4
|
Floatable photocatalytic hydrogel nanocomposites for large-scale solar hydrogen production. NATURE NANOTECHNOLOGY 2023:10.1038/s41565-023-01385-4. [PMID: 37106047 DOI: 10.1038/s41565-023-01385-4] [Citation(s) in RCA: 18] [Impact Index Per Article: 18.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/10/2022] [Accepted: 03/27/2023] [Indexed: 05/04/2023]
Abstract
Storing solar energy in chemical bonds aided by heterogeneous photocatalysis is desirable for sustainable energy conversion. Despite recent progress in designing highly active photocatalysts, inefficient solar energy and mass transfer, the instability of catalysts and reverse reactions impede their practical large-scale applications. Here we tackle these challenges by designing a floatable photocatalytic platform constructed from porous elastomer-hydrogel nanocomposites. The nanocomposites at the air-water interface feature efficient light delivery, facile supply of water and instantaneous gas separation. Consequently, a high hydrogen evolution rate of 163 mmol h-1 m-2 can be achieved using Pt/TiO2 cryoaerogel, even without forced convection. When fabricated in an area of 1 m2 and incorporated with economically feasible single-atom Cu/TiO2 photocatalysts, the nanocomposites produce 79.2 ml of hydrogen per day under natural sunlight. Furthermore, long-term stable hydrogen production in seawater and highly turbid water and photoreforming of polyethylene terephthalate demonstrate the potential of the nanocomposites as a commercially viable photocatalytic system.
Collapse
|
5
|
Rheological and mechanical behavior of non‐spherical poly(lactic acid) particles embedded poly(butylene adipate‐co‐terephthalate) blend. J Appl Polym Sci 2022. [DOI: 10.1002/app.53445] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
6
|
Sedimentation and Rheological Study of Microalgal Cell (Chlorella sp. HS2) Suspension. BIOTECHNOL BIOPROC E 2022. [DOI: 10.1007/s12257-021-0275-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/02/2022]
|
7
|
Effect of Colloidal Interactions and Hydrodynamic Stress on Particle Deposition in a Single Micropore. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:6013-6022. [PMID: 35507428 DOI: 10.1021/acs.langmuir.2c00237] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Clogging is ubiquitous. It happens in a wide range of material processing and causes severe performance degradation or process breakdown. In this study, we investigate clogging dynamics in a single micropore by controlling the surface property of the particle and processing condition. Microfluidic observation is conducted to investigate particle deposition in a contraction microchannel where polystyrene suspension is injected as a feed solution. The particle deposition area is quantified using the images taken using a CCD camera in both upstream and downstream of the microchannel. Pressure drop across the microchannel is also measured. When the particle interaction is repulsive, the deposition occurs mostly in downstream, while an opposite tendency is identified when the particle interaction is attractive. More complex deposition characteristics are found as the flow rate is changed. Particle flux density and the ratio of lift force to colloidal force are introduced to explain the clogging dynamics. This study provides a useful insight to alleviate clogging issues by controlling the colloidal interaction and hydrodynamic stress.
Collapse
|
8
|
Mechanically enhanced poly(lactic acid)/polyurethane blend with interfacial‐localized clay particles. J Appl Polym Sci 2022. [DOI: 10.1002/app.52466] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
9
|
Significant Agglomeration of Conductive Materials and the Dispersion State Change of the Ni-Rich NMC-Based Cathode Slurry during Storage. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.1c04205] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
10
|
Stratification Mechanism in the Bidisperse Colloidal Film Drying Process: Evolution and Decomposition of Normal Stress Correlated with Microstructure. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021; 37:13712-13728. [PMID: 34751580 DOI: 10.1021/acs.langmuir.1c02455] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The evolution of the normal stress and microstructure in the drying process of bidisperse colloidal films is studied using the Brownian dynamics simulation. Here, we show that the formation process of small-on-top stratification can be explained by normal stress development. At high PeL's, a stratified layer with small particles is formed near the interface. The accumulated particles near the interface induce the localization of normal stress so that the normal stress at the interface increases from the beginning of drying. We analyze this stress development from two points of view, on the global length scale and particle length scale. On the global length scale, the localization of normal stress is quantified by the scaled normal stress difference between the interface and substrate. For all PeL's tested in this study, the scaled normal stress difference increases until the accumulation region reaches the substrate. After the maximum, the stress difference remains at the maximum at lower PeL's, while it decreases at higher PeL's. The microstructural analysis shows that this stress development is explained through the evolution of the particle contact number distribution at the interface and substrate. On the particle length scale, we derive the scaled local force applied to each type of particle by decomposing the local normal stress. At high PeL's, the scaled local force for the large particle is large compared to that for the small particle near the interface, indicating that the large particles are strongly pushed away from the interface. Associating the volume fraction profile with the local force field, we suggest that the strong scaled force for the large particle is attributed to the significant increase in the average number of small particles in contact with large ones. This study has significance in probing the drying mechanism of bidisperse colloidal films and the stratification mechanism.
Collapse
|
11
|
Drying mechanism of monodisperse colloidal film: Evolution of normal stress and its correlation with microstructure. AIChE J 2021. [DOI: 10.1002/aic.17400] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
|
12
|
Controlling Drying Stress and Mechanical Properties of Battery Electrodes Using a Capillary Force-Induced Suspension System. Ind Eng Chem Res 2021. [DOI: 10.1021/acs.iecr.0c06130] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
13
|
Effect of Melt-Compounding Protocol on Self-Aggregation and Percolation in a Ternary Composite. Polymers (Basel) 2020; 12:polym12123041. [PMID: 33353124 PMCID: PMC7766847 DOI: 10.3390/polym12123041] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/12/2020] [Revised: 12/10/2020] [Accepted: 12/15/2020] [Indexed: 11/16/2022] Open
Abstract
A ternary composite of poly(lactic acid) (PLA), poly(caprolactone) (PCL), and carbon black (CB) shows the PCL-induced CB self-aggregation and percolation formation when the amount of the PCL phase as the secondary phase is as small as the amount of CB. Furthermore, when the drop size of the PCL phase becomes smaller, the ternary composite forms a percolation of high order structure, resulting in a remarkable enhancement of the electrical conductivity (~4 × 10-2 S/m with 4 wt.% CB). To further control the percolation structure, the composite fabrication is controlled by splitting a typical single-step mixing process into two steps, focusing on the dispersion of the secondary PCL phase and the CB particles separately. Under the single-step mixing protocol, the ternary composite shows a structure with greater CB aggregation in the form of a high aspect ratio and large aggregates (aggregate perimeter~aggregate size 0.7). Meanwhile, the two-step mixing process causes the CB aggregates to expand and create a higher structure (aggregate perimeter~aggregate size 0.8). The reduced size of the secondary phase under a mixing condition with high shear force prior to the addition of CB provides a larger interfacial area for CB to diffuse into the PCL phase during the subsequent mixing step, resulting in a further expansion of CB aggregation throughout the composite. The particle percolation of such a high order structure is attributed to high storage modulus (G'), high Young's modulus, high dielectric loss (ε″), and negative-positive switching of dielectric constant at high frequency (of 103 Hz) of composite.
Collapse
|
14
|
The first normal stress difference of non-Brownian hard-sphere suspensions in the oscillatory shear flow near the liquid and crystal coexistence region. SOFT MATTER 2020; 16:9864-9875. [PMID: 33073283 DOI: 10.1039/d0sm01204a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
We carry out a numerical study to investigate the dynamics of non-Brownian hard-sphere suspensions near the liquid and crystal coexistence region in small to large amplitude oscillatory shear flow. The first normal stress difference (N1) and related rheological functions are carefully analyzed, focusing on the strain stiffening phenomenon, which occurs in the large strain amplitude region. Under oscillatory shear, we observe several unique behaviors of N1. A negative nonzero mean value of N1 (N1,0) is observed for the applied strain amplitudes. The change of the sign, from negative to positive, at the maximum value of N1 (N1,max) is observed at a specific point, which is not consistent with the critical strain amplitude (γ0,c) at which the modulus begins to deviate from linear viscoelasticity. The behavior of N1 in the oscillatory shear flow is different from that of N1 in steady shear flow, that is, the characteristics of N1 in strain stiffening and shear thickening are quite distinguished from each other. We also perform structural analysis to confirm the relationship between the rheological properties and microstructure of the suspension. A strong correlation is observed between the global bond order parameter (Ψ6) and the distortions in both nonlinear shear and normal stresses. The most noticeable characteristic is captured through the maximum of the global bond order parameter (Ψ6,max). The strain amplitude at the slope change of Ψ6,max corresponds to the point where a unique behavior of N1 is observed, i.e. the change of the sign in N1,max, but a strong correlation is not captured at γ0,c. This demonstrates that the normal stress responds to particle ordering more sensitively than other rheological functions based on shear stress like dynamic moduli. As far as we are concerned, the behavior of N1 has rarely been fully explored and related with the strain stiffening of non-Brownian suspensions so far. Therefore, this study has significance as the first report to strictly analyze strain stiffening along with the first normal stress difference N1.
Collapse
|
15
|
Role of PVDF in Rheology and Microstructure of NCM Cathode Slurries for Lithium-Ion Battery. MATERIALS (BASEL, SWITZERLAND) 2020; 13:E4544. [PMID: 33066170 PMCID: PMC7602005 DOI: 10.3390/ma13204544] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/19/2020] [Revised: 10/01/2020] [Accepted: 10/10/2020] [Indexed: 11/16/2022]
Abstract
A binder plays a critical role in dispersion of coating liquids and the quality of coating. Poly(vinylidene fluoride) (PVDF) is widely used as a binder in cathode slurries; however, its role as a binder is still under debate. In this paper, we study the role of PVDF on the rheology of cathode battery slurries consisting of Li(Ni1/3Mn1/3Co1/3)O2 (NCM), carbon black (CB) and N-methyl-2-pyrrolidone (NMP). Rheology and microstructure of cathode slurries are systemically investigated with three model suspensions: CB/PVDF/NMP, NCM/PVDF/NMP and NCM/CB/PVDF/NMP. To highlight the role of PVDF in cathode slurries, we prepare the same model suspensions by replacing PVDF with PVP, and we compare the role of PVDF to PVP in the suspension rheology. We find that PVDF adsorbs neither onto NCM nor CB surface, which can be attributed to its poor affinity to NCM and CB. Rheological measurements suggest that PVDF mainly increases matrix viscosity in the suspension without affecting the microstructure formed by CB and NCM particles. In contrast to PVDF, PVP stabilizes the structure of CB and NCM in the model suspensions, as it is adsorbed on the CB surface. This study will provide a useful insight to fundamentally understand the rheology of cathode slurries.
Collapse
|
16
|
Particle dynamics at fluid interfaces studied by the color gradient lattice Boltzmann method coupled with the smoothed profile method. Phys Rev E 2020; 101:053302. [PMID: 32575323 DOI: 10.1103/physreve.101.053302] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/13/2019] [Accepted: 04/12/2020] [Indexed: 11/07/2022]
Abstract
We suggest a numerical method to describe particle dynamics at the fluid interface. We adopt a coupling strategy by combining the color gradient lattice Boltzmann method (CGLBM) and smoothed profile method (SPM). The proposed scheme correctly resolves the momentum transfer among the solid particles and fluid phases while effectively controlling the wetting condition. To validate the present algorithm (CGLBM-SPM), we perform several simulation tests like wetting a single solid particle and capillary interactions in two solid particles floating at the fluid interface. Simulation results show a good agreement with the analytical solutions available and look qualitatively reasonable. From these analyses, we conclude that the key features of the particle dynamics at the fluid interface are correctly resolved in our simulation method. In addition, we apply the present method for spinodal decomposition of a ternary mixture, which contains two-immiscible fluids with solid particles. By adding solid particles, fluid segregation is much suppressed than in the binary liquid mixture case. Furthermore, it has different morphology, such as with the jamming structure of the particles at the fluid interface, and captured images are similar to bicontinuous interfacially jammed emulsion gels in literature. From these results, we confirm the feasibility of the present method to describe soft matters; in particular, emulsion systems that contain solid particles at the interface.
Collapse
|
17
|
Reduced graphene-oxide filter system for removing filterable and condensable particulate matter from source. JOURNAL OF HAZARDOUS MATERIALS 2020; 391:122223. [PMID: 32036316 DOI: 10.1016/j.jhazmat.2020.122223] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/29/2019] [Revised: 02/01/2020] [Accepted: 02/01/2020] [Indexed: 06/10/2023]
Abstract
Air pollution is one of the most serious problems facing mankind because of its impact on ecosystems and human beings. Although particulate matter (PM) consists of both filterable PM (FPM) and condensable PM (CPM), most research has focused on eliminating only FPM. In this work, we introduce a filter system that removes both FPM and CPM from pollution source with high efficiency. The system consists of two reduced graphene oxide (rGO) filters and a condenser between them that can remove the usual FPM and at the same time CPM-induced FPM that typically leaves the pollution source unabated. The filters, quite effective in removing the PM with their three-dimensional structure, retain the removal capability even at high temperature and in acidic condition that prevail at the pollution source. The proposed rGO system could provide a complete solution for removal of both FPM and CPM from the pollution source.
Collapse
|
18
|
Design of electrical conductive poly(lactic acid)/carbon black composites by induced particle aggregation. J Appl Polym Sci 2020. [DOI: 10.1002/app.49295] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
19
|
Design Optimization for a Microfluidic Crossflow Filtration System Incorporating a Micromixer. MICROMACHINES 2019; 10:E836. [PMID: 31801229 PMCID: PMC6952986 DOI: 10.3390/mi10120836] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/30/2019] [Revised: 11/21/2019] [Accepted: 11/29/2019] [Indexed: 11/17/2022]
Abstract
In this study, we report on a numerical study on design optimization for a microfluidic crossflow filtration system incorporated with the staggered herringbone micromixer (SHM). Computational fluid dynamics (CFD) and the Taguchi method were employed to find out an optimal set of design parameters, mitigating fouling in the filtration system. The flow and the mass transfer characteristics in a reference SHM model and a plain rectangular microchannel were numerically investigated in detail. Downwelling flows in the SHM model lead to backtransport of foulants from the permeable wall, which slows down the development of the concentration boundary layer in the filtration system. Four design parameters - the number of grooves, the groove depth, the interspace between two neighboring grooves, and the interspace between half mixing periods - were chosen to construct a set of numerical experiments using an orthogonal array from the Taguchi method. The Analysis of Variance (ANOVA) using the evaluated signal-to-noise (SN) ratios enabled us to identify the contribution of each design parameter on the performance. The proposed optimal SHM model indeed showed the lowest growth rate of the wall concentration compared to other SHM models.
Collapse
|
20
|
|
21
|
How the interaction between styrene-butadiene-rubber (SBR) binder and a secondary fluid affects the rheology, microstructure and adhesive properties of capillary-suspension-type graphite slurries used for Li-ion battery anodes. Colloids Surf A Physicochem Eng Asp 2019. [DOI: 10.1016/j.colsurfa.2019.123692] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/26/2022]
|
22
|
Colloidal dynamics and elasticity of dense wax particle suspensions over a wide range of volume fractions when tuning the softness by temperature. Colloids Surf A Physicochem Eng Asp 2019. [DOI: 10.1016/j.colsurfa.2019.04.030] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
23
|
Orthogonal superposition rheometry of colloidal gels: time-shear rate superposition. SOFT MATTER 2018; 14:8651-8659. [PMID: 30328462 DOI: 10.1039/c8sm01512k] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
We explore the relaxation behavior of model colloidal gels under steady shear flow by means of orthogonal superposition rheometry. Fumed silica and carbon black dispersions in Newtonian matrices are used as a model system. As shear rate increases, the frequency dependent orthogonal moduli of the gels shift along the frequency axis without changing their shape, which finally can be superimposed to yield a single master curve. This indicates that the shear rate tunes a master clock for overall relaxation modes in the sheared colloidal gels to produce a "time-shear rate superposition (TSS)", as temperature does in polymeric liquids to produce a time-temperature superposition (TTS). The horizontal shift factor required at each shear rate to obtain the master curve is found to be directly proportional to the suspension viscosity for all the cases. From this result, we suggest that the suspension viscosity determines the overall relaxation time of the particles in the flowing colloidal gel.
Collapse
|
24
|
Agglomerate Breakup of Destabilized Polystyrene Particles under a Cross-Channel Planar Extensional Flow. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2018; 34:11454-11463. [PMID: 30176146 DOI: 10.1021/acs.langmuir.8b01958] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Deformation and breakup of a single agglomerate exposed to pure planar extensional flow in a cross-channel were experimentally investigated. Aggregation was generated by applying shear with destabilized polystyrene particles, and the fractal dimension, df, of the agglomerate was 2.25. The aggregation focused on the center of the channel by sheath flow was rotated while approaching stagnant point. Then, the aspect ratio increased as it deformed close to the stagnant point. The probability of the breakup and the fragment distribution were dependent upon the viscosity and flow rate and were superimposed on a master curve as a function of applied stress. With the increase in stress, the projected area of the fragment that was split by the flow decreased with a power-law relationship, and the exponent was in agreement with the model prediction.
Collapse
|
25
|
Non-local stresses in highly non-uniformly flowing suspensions: The shear-curvature viscosity. J Chem Phys 2018; 149:014903. [PMID: 29981556 DOI: 10.1063/1.5035268] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/14/2022] Open
Abstract
For highly non-uniformly flowing fluids, there are contributions to the stress related to spatial variations of the shear rate, which are commonly referred to as non-local stresses. The standard expression for the shear stress, which states that the shear stress is proportional to the shear rate, is based on a formal expansion of the stress tensor with respect to spatial gradients in the flow velocity up to leading order. Such a leading order expansion is not able to describe fluids with very rapid spatial variations of the shear rate, like in micro-fluidics devices and in shear-banding suspensions. Spatial derivatives of the shear rate then significantly contribute to the stress. Such non-local stresses have so far been introduced on a phenomenological level. In particular, a formal gradient expansion of the stress tensor beyond the above mentioned leading order contribution leads to a phenomenological formulation of non-local stresses in terms of the so-called "shear-curvature viscosity". We derive an expression for the shear-curvature viscosity for dilute suspensions of spherical colloids and propose an effective-medium approach to extend this result to concentrated suspensions. The validity of the effective-medium prediction is confirmed by Brownian dynamics simulations on highly non-uniformly flowing fluids.
Collapse
|
26
|
Brownian dynamics of colloidal microspheres with tunable elastic properties from soft to hard. Colloids Surf A Physicochem Eng Asp 2018. [DOI: 10.1016/j.colsurfa.2018.02.046] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
27
|
Preparation of polycarbonate/poly(acrylonitrile-butadiene-styrene)/mesoporous silica nanocomposite films and its rheological, mechanical, and sound absorption properties. J Appl Polym Sci 2018. [DOI: 10.1002/app.45777] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
28
|
Effect of affinity on the structure formation in highly size asymmetric bimodal suspensions. Colloids Surf A Physicochem Eng Asp 2018. [DOI: 10.1016/j.colsurfa.2017.11.042] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
29
|
|
30
|
|
31
|
|
32
|
Conductive poly(high internal phase emulsion) foams incorporated with polydopamine-coated carbon nanotubes. POLYMER 2017. [DOI: 10.1016/j.polymer.2017.01.007] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
33
|
Formation and alteration of airborne particles in the subway environment. ENVIRONMENTAL SCIENCE. PROCESSES & IMPACTS 2017; 19:59-64. [PMID: 28002504 DOI: 10.1039/c6em00576d] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Most particles in the rail subway environment are sub-micron sized ferruginous flakes and splinters generated mechanically by frictional wear of brake pads, wheels and rails. To better understand the mechanisms of formation and the alteration processes affecting inhalable particles in subways, PM samples (1-2.5 μm and 2.5-10 μm) were collected in the Barcelona Metro and then studied under a scanning electron microscope. Most particles in these samples are hematitic (up to 88%), with relatively minor amounts of mineral matter (up to 9%) and sulphates (up to 5%). Detailed microscopy (using back scattered and TEM-DRX imaging) reveals how many of the metallic particles comprise the metallic Fe nucleus surrounded by hematite (Fe2O3) and a coating of sulphate and chloride salts mixed with mineral matter (including Ca-carbonates, clay minerals and quartz). These observations record the emission of fine to ultrafine FePM by frictional wear at elevated temperatures that promote rapid partial (or complete) oxidation of the native metal. Water condensing on the PM surface during cooling leads to the adsorption of inorganic mineral particles that coat the iron oxide. The distinctively layered polymineralic structure that results from these processes is peculiar to particles generated in the subway environment and very different from PM typically inhaled outdoors.
Collapse
|
34
|
Effect of preheating on the viscoelastic properties of dental composite under different deformation conditions. Dent Mater J 2017; 34:702-6. [PMID: 26438995 DOI: 10.4012/dmj.2015-042] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
Preheating of dental composites improves their flowability, facilitating successful restorations. However, the flowability of dental composites is affected not only by temperature but also by the deformation conditions. In the present work, the effects of various deformation conditions upon the viscoelastic properties of a preheated dental composite were studied. The rheological properties of Z350 dental composites at 25, 45, and 60°C were measured by a strain-controlled rheometer. When a low strain (0.03%) was applied, the preheated composite exhibited greater shear storage modulus (G') and complex viscosity (η*) than a room-temperature composite. Oppositely, when a high strain (50%) was applied, G' and η* of a preheated composite were lower than those of a room-temperature composite. Preheating of dental composites might be helpful in clinical practice both to increase the slumping resistance when minimal manipulation is used (e.g., during the build-up of a missing cusp tip) and to increase flowability when manipulation entailing high shear strain is applied (e.g., when uncured composite resin is spread on a dentin surface).
Collapse
|
35
|
Effect of relative humidity on preeclampsia. CLIN EXP OBSTET GYN 2017; 44:264-267. [PMID: 29746035] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
PURPOSE OF INVESTIGATION The authors aimed to determine the relationship between meteorological variables and hypertension in pregnancy by using data from a national weather database. MATERIALS AND METHODS For this population-based observational study, the database of the Korea National Health Insurance (KNHI) Claims of the Health Insurance Review and Assessment Service (HIRA) and Korea Meteorological Administration was used. The 48,275 women with preeclampsia among 2,495,383 women who gave birth were included. Monthly meteorological factors and preeclampsia prevalence for five years were statistically analyzed. RESULTS Among temperature, relative humidity, sunlight duration, and rainfall, only relative humidity had a significant inverse correlation with the preeclampsia prevalence (p < 0.001). The other meteorological factors were not associated with preeclampsia. CONCLUSION Relative humidity may be a significant factor for of the development of preeclampsia. Further monitoring of weather parameters during the entire pregnancy period may be the best method for verifying the present results in the development of preeclampsia.
Collapse
|
36
|
Structural Development of Nanoparticle Dispersion during Drying in Polymer Nanocomposite Films. Macromolecules 2016. [DOI: 10.1021/acs.macromol.6b01939] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
37
|
A review on particle dynamics simulation techniques for colloidal dispersions: Methods and applications. KOREAN J CHEM ENG 2016. [DOI: 10.1007/s11814-016-0229-9] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
38
|
Characterization of Compatibilizing Effect of Organoclay in Poly(lactic acid) and Natural Rubber Blends by FT-Rheology. Macromolecules 2016. [DOI: 10.1021/acs.macromol.5b02157] [Citation(s) in RCA: 40] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
39
|
Effect of electric field on polymer/clay nanocomposites depending on the affinities between the polymer and clay. J Appl Polym Sci 2016. [DOI: 10.1002/app.43582] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
40
|
|
41
|
Film squeezing process for generating oblate spheroidal particles with high yield and uniform sizes. Colloid Polym Sci 2016. [DOI: 10.1007/s00396-016-3838-2] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
|
42
|
Pressure dependent structural changes and predicted electrical polarization in perovskite RMnO₃. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2016; 28:056005. [PMID: 26760118 DOI: 10.1088/0953-8984/28/5/056005] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
High pressure x-ray diffraction measurements on perovskite RMnO3 (R = Dy, Ho and Lu) reveal that varying structural changes occur for different R ions. Large lattice changes (orthorhombic strain) occur in DyMnO3 and HoMnO3 while the Jahn-Teller (JT) distortion remains stable. Conversely, in the small R-ion system LuMnO3, Mn-O bond distortions are observed between 4 and 8 GPa with a broad minimum in the JT distortion. High pressure infrared measurements indicate that a phonon near 390 cm(-1) corresponding to the complex motion of the Mn and O ions changes anomalously for LuMnO3. It softens in the 4-8 GPa region, which is consistent with the structural change in Mn-O bonds and then hardens at higher pressures. By contrast, the phonons continuously harden with increasing pressure for DyMnO3 and HoMnO3. Density functional theory methods show that E-phase LuMnO3 is the most stable phase up to the 10 GPa pressure examined. Simulations indicate that the distinct structural change under pressure in LuMnO3 can possibly be used to optimize the electric polarization by pressure/strain.
Collapse
|
43
|
|
44
|
Nanoparticle-Induced Gelation of Bimodal Slurries with Highly Size-Asymmetric Particles: Effect of Surface Chemistry and Concentration. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2015; 31:13639-13646. [PMID: 26634946 DOI: 10.1021/acs.langmuir.5b03752] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
A systematic study has been performed to investigate the effect of surface potential of nanoparticles on the rheological behavior of bimodal suspensions, using a model system consisting of polystyrene latex (primary size ∼530 nm) and alumina-coated silica (primary size ∼12 nm) particles. The surface potential of small particles was tuned by varying the solution pH, causing them to be repulsive to each other, attractive to each other, and oppositely charged to the large particles, while the large particles remained electrostatically stabilized. We found that the rheological properties could be dramatically changed from viscous to gel-like depending on the surface potential and concentration of small particles. A colloidal gel was induced by small particles when the small particles had the opposite charge to the large particles and a volume fraction of 10(-4) < ϕsmall < 10(-3), and when the small particles were attractive to each other above a critical threshold, ϕsmall > 10(-4). Cryo-SEM distinguished the gel structures to be either short bridging gels produced by oppositely charged small particles or long bridging gels or dense gels produced by attractive small particles. On the basis of this rheological behavior and microstructure, we prepared a phase diagram of highly size-asymmetric bimodal colloids with respect to the surface chemistry and concentration of small particles.
Collapse
|
45
|
Structural change and dynamics of colloidal gels under oscillatory shear flow. SOFT MATTER 2015; 11:9262-9272. [PMID: 26524658 DOI: 10.1039/c5sm01651g] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The dynamics and rheological behavior of colloidal gels under oscillatory shear flow have been studied by using the Brownian dynamics simulations. The dynamics is studied under the oscillatory shear of small, medium, and large amplitudes. In the small amplitude oscillatory shear (SAOS) regime, the colloidal gel retains a rigid-chain network structure. The colloidal gel oscillates with small structural fluctuations and the elastic stress shows a linear viscoelastic response. In the medium amplitude oscillatory shear (MAOS) regime, the rigid network structure is ruptured, and a negative correlation between the absolute value of strain and the average bond number is observed. The elastic stress shows a transient behavior in between the SAOS and LAOS responses. In the large amplitude oscillatory shear (LAOS) regime, the colloidal gel shows a soft chain structure. Contrary to the negative correlation in the MAOS regime, the colloidal gel shows an oscillating dynamics with a positive correlation between the absolute value of strain and the average bond number. The soft chain structure exhibits no elasticity at small strain, while it shows strong elasticity at large strain. The oscillating dynamics and the rheological behavior are discussed in terms of the microstructural change from the rigid to soft chain structure.
Collapse
|
46
|
Rheology and Morphology of PP/ionomer/clay Nancomposites Depending on Selective Dispersion of Organoclays. KOREAN CHEMICAL ENGINEERING RESEARCH 2015. [DOI: 10.9713/kcer.2015.53.6.709] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
47
|
Nanothin Coculture Membranes with Tunable Pore Architecture and Thermoresponsive Functionality for Transfer-Printable Stem Cell-Derived Cardiac Sheets. ACS NANO 2015; 9:10186-202. [PMID: 26361723 DOI: 10.1021/acsnano.5b03823] [Citation(s) in RCA: 31] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/08/2023]
Abstract
Coculturing stem cells with the desired cell type is an effective method to promote the differentiation of stem cells. The features of the membrane used for coculturing are crucial to achieving the best outcome. Not only should the membrane act as a physical barrier that prevents the mixing of the cocultured cell populations, but it should also allow effective interactions between the cells. Unfortunately, conventional membranes used for coculture do not sufficiently meet these requirements. In addition, cell harvesting using proteolytic enzymes following coculture impairs cell viability and the extracellular matrix (ECM) produced by the cultured cells. To overcome these limitations, we developed nanothin and highly porous (NTHP) membranes, which are ∼20-fold thinner and ∼25-fold more porous than the conventional coculture membranes. The tunable pore size of NTHP membranes at the nanoscale level was found crucial for the formation of direct gap junctions-mediated contacts between the cocultured cells. Differentiation of the cocultured stem cells was dramatically enhanced with the pore size-customized NTHP membrane system compared to conventional coculture methods. This was likely due to effective physical contacts between the cocultured cells and the fast diffusion of bioactive molecules across the membrane. Also, the thermoresponsive functionality of the NTHP membranes enabled the efficient generation of homogeneous, ECM-preserved, highly viable, and transfer-printable sheets of cardiomyogenically differentiated cells. The coculture platform developed in this study would be effective for producing various types of therapeutic multilayered cell sheets that can be differentiated from stem cells.
Collapse
|
48
|
Bimodal colloid gels of highly size-asymmetric particles. PHYSICAL REVIEW. E, STATISTICAL, NONLINEAR, AND SOFT MATTER PHYSICS 2015; 92:012313. [PMID: 26274168 DOI: 10.1103/physreve.92.012313] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/08/2015] [Indexed: 06/04/2023]
Abstract
We report a type of colloidal gel, induced by a minute incremental addition of mutually attractive small particles (size ∼12 nm) to a suspension of highly charged large particles (size ∼500 nm). The gel's morphological behavior does not follow the typical power-law scaling for fractal clusters. Its unique scaling behavior has two distinct power-law indices, based on particle volume fraction. We show the unique scaling behavior arises when nonfractal networks of large particles are bridged by small-particle clusters, which occurs between a lower and upper critical boundary of small particle volume fraction.
Collapse
|
49
|
|
50
|
Rheology and microstructure of non-Brownian suspensions in the liquid and crystal coexistence region: strain stiffening in large amplitude oscillatory shear. SOFT MATTER 2015; 11:4061-4074. [PMID: 25909879 DOI: 10.1039/c5sm00180c] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Concentrated hard-sphere suspensions in the liquid and crystal coexistence region show a unique nonlinear behavior under a large amplitude oscillatory shear flow, the so-called strain stiffening, in which the viscosity or modulus suddenly starts to increase near a critical strain amplitude. Even though this phenomenon has been widely reported in experiments, its key mechanism has never been investigated in a systematic way. To have a good understanding of this behavior, a numerical simulation was performed using the lattice Boltzmann method (LBM). Strain stiffening was clearly observed at large strain amplitudes, and the critical strain amplitude showed an angular frequency dependency. The distortion of the shear stress appeared near the critical strain amplitude, and the nonlinear behavior was quantified by the Fourier transformation (FT) and the stress decomposition methods. Above the critical strain amplitude, an increase in the global bond order parameter Ψ(6) was observed at the flow reversal. The maximum of Ψ(6) and the maximum shear stress occurred at the same strain. These results show how strongly the ordered structure of the particles is related to the stress distortion. The ordered particles maintained a bond number of "two" with alignment with the compressive axis, and they were distributed over a narrow range of angular distribution (110°-130°). In addition, the ordered structure was formed near the lowest shear rate region (the flow reversal). The characteristics of the ordered structure were remarkably different from those of the hydroclusters which are regarded as the origin of shear thickening. It is clear that strain stiffening and shear thickening originate from different mechanisms. Our results clearly demonstrate how the ordering of the particles induces strain stiffening in the liquid and crystal coexistence region.
Collapse
|