Divergence between CBCT and Optical Scans for Soft Tissue Analysis and Cephalometry in Facial Imaging: A cross-sectional study on healthy adults

BACKGROUND

Facial soft tissue analysis is becoming increasingly emphasized in orthodontic diagnosis and treatment planning. While traditional cephalometry primarily focuses on hard tissues, recent non-invasive imaging techniques offer the potential to comprehensively evaluate three-dimensional (3D) facial soft tissues. The aim of the study was to establish the geometrical 3D and cephalometric divergence between Cone Beam Computed Tomography (CBCT) derived images and scanned soft tissues. Crucial for enhancing orthodontic diagnosis, minimizing patient exposure to ionizing radiation and providing facial cephalometric parameters.

MATERIAL AND METHODS

A cross-sectional study was conducted from January 2020 to May 2023. CBCT and 3D facial scans were obtained simultaneously using a specialized imaging system. Reproducible landmark points were selected for both cephalometric and soft tissue analysis. Angular and linear measurements were recorded, and correlations between CT and facial scans were statistically assessed.

RESULTS

Comparisons between 10 CBCT-derived and 10 facial scan-based soft tissue representations resulted into 1.8mm mean root median square (RMS). Angular measurements, such as ANB, right gonial angle, and left gonial angle, exhibited a 0.9° of difference with their respective soft tissue variables. In contrast, linear measurements of total anterior facial height showed a lower correlation coefficient, equal to 0.51. The correlation between soft tissues and underlying hard tissues was more pronounced for gonial angles.

CONCLUSION

Facial soft tissue analysis using either 3D facial scans or CBCT-derived offers similar results for orthodontic diagnosis and treatment planning. These findings support the use of non-invasive diagnostic tools in orthodontics, although further investigations are needed to comprehensively understand the complexity of hard and soft tissue relationships.

Are palatal rugae reliable markers for 3D superimposition and forensic human identification after palatal expansion? A systematic review

OBJECTIVES

Palatal rugae are periodic structures situated in the palatal mucosa, often used as landmarks for human identification and superimposition of digital dental models. This review aims to collect the current evidence regarding whether orthodontic palatal expansion could affect the stability of the palatal rugae and to give preliminary guidelines.

MATERIALS AND METHODS

A systematic review of the literature was performed in the scientific databases Pubmed; Embase; WoS; and Cochrane. Grey Literature was also sought (clinicaltrial.gov; ICTRP; AHRQ; INAHTA). The search protocol, was registered in PROSPERO (N*208722). Data extraction comprised: year of publication, journal, sample size, characteristics of the experimental and control group, type of expander, expansion protocol, rugae classification, measurement method on casts, time between casts, method error, rugae change, morphology change and overall outcome. Risk of bias of the included articles was evaluated with the Newcastle-Ottawa Scale.

RESULTS

A total of 12394 manuscripts were retrieved after duplicate removal. From these, nine articles were finally included for data extraction. three studies scored as low risk of bias, two as medium and four as high.

CONCLUSIONS

The morphology of the palatal rugae can be modified by palatal expansion techniques, especially by rapid maxillary expansion. The first rugae is the most stable along with the points close to the palatal midline, which should be used as a reference both for manual or semi-automatic superimpositions. Human identification and serial superimpositions based on palatal rugae should not be carried immediately post expansion and be taken in consideration with caution in patients who underwent prior palatal expansion.

Survey of Oral Hygiene Habits and Knowledge among School Children: a cross-sectional study from Italy

AIM

This study is aimed to investigate the oral hygiene practice, knowledge and attitude of young adults, assessing their awareness about the impact of a certain "risk" behaviour on their oral and dental health.

MATERIALS

This is a cross-sectional survey study conducted on 829 students (350 males and 479 females, mean age 13-20 years) attending high school in Milan and surrounding areas. They were asked to complete anonymous questionnaire during the first semester of the 2019-2020 school year, under the supervision of a teacher and/or an assigned interviewer. The questionnaire was created by "Laboratorio Adolescenza", in collaboration with the International Alliance of Responsible Drinking (IARD) Research Institute and the University of Milan. All of the data was compiled into table or graph form and analysed.

CONCLUSION

There is a general awareness among Italian school children about the risks of bad oral habits, however, there is a need to improve the oral health knowledge, attitude and practices in the target population with emphasis on improvement of oral hygiene practices.

Clinical Performance Evaluation of a Hyaluronic Acid Dental Gel for the Treatment of Traumatic Ulcers in Patients with Fixed Orthodontic Appliances: A Randomized Controlled Trial

BACKGROUND

A newly available gel containing hyaluronic acid (HA) and polyvinylpyrrolidone was tested for efficacy on traumatic oral ulcers (TOU) caused by fixed orthodontic appliances.

METHODS

A double-blind RCT was conducted to test the new gel versus a placebo. According to the sample size calculation, a total of 60 patients were considered sufficient and randomly allocated to one of the two groups out of a pool of 100 total patients who initially agreed to participate in the study. A VAS scale test and lesion measurements at T0, T1, and T2 were performed on the patients.

RESULTS

A total of 70 patients developed TOU, with 8 drop-outs; the intergroup comparison showed a statistically significant greater dimension of the lesion in the control group at T2 when compared to the test group. The pain experienced by the patients belonging to the test group was significantly lower than the pain in the patients in the control group Conclusions: Under the limitations of the study, the new formula might provide faster healing with less pain experienced by the patient when compared to a placebo.

Oral and throat microbiological changes after orthodontic debonding

As already known, orthodontic treatment presents a factor of plaque retention, promoting an increase of bacterial growth in the oral cavity. Nevertheless, after orthodontic debonding an alteration of the previous microbiological status may occur. The present study was designed to assess variations among six bacterial species in the oral cavity and the status of oral health after orthodontic debonding. At the end of the fixed orthodontic treatment, 30 patients were divided into three groups based on the type of retention: I - 10 patients were treated with upper and lower fixed retention devices, II - 10 with upper and lower removable retention devices, and III - 10 with lower fixed and upper removable retention devices. To assess the alterations of oral microbiota after orthodontic debonding, two salivary swabs were collected for each individual: the first immediately after debonding (T0) and the other one 6 weeks later (T1). Six species, the ones most correlated with the development of caries and periodontal disease, were selected for microbiological analysis with Real-time PCR: Streptococcus mutans, Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola, and Fusobacterium nucleatum. Furthermore, in order to correlate the microbiological outcomes with the clinical condition, oral health indexes at T0 and T1 were assessed for all patients. Six weeks after debonding, the salivary levels of the bacteria investigated tend to decrease and the values of the oral health indexes tend to improve with all types of treatment considered (p<.05). Salivary bacteria levels and oral health are similarly influenced by fixed and/or removable orthodontic retentions.

Impact of Smoking Habit on Peri-Implant Indicators following Different Therapies: A Systematic Review

Peri-implant disease and its treatment is becoming a major concern for clinicians as the number of implants placed each year is rising. Smoking is a common habit, and it is associated with an increased risk of developing peri-implant disease. The role of smoking in the response to peri-implant treatment has never been investigated. Searches were conducted in electronic databases to screen articles published until August 2021. The included studies had at least two groups of patients: peri-implant disease only or peri-implant disease and smoking status. Outcomes of interest included plaque index (PI), probing depth (PD), bleeding on probing (BoP), radiographic crestal bone loss (CBL), and analysis of peri-implant sulcular fluid. Seven hundred and forty-nine articles were found in the databases, only 71 articles potentially qualified. A total of seven studies with a minimum follow-up of six months were included. There is no homogeneity in the diagnosis, smoker definition and treatment proposed. All surgical and non-surgical treatment have statistically significantly different outcomes in smokers and nonsmokers. Recognizing this study’s limitations, we conclude that smoking might play a significant role on the outcome of peri-implant disease treatment. None of the proposed treatments appear to be significantly more effective.

Poloxamer-Based Hydrogel as Drug Delivery System: How Polymeric Excipients Influence the Chemical-Physical Properties

Thermogelling amphiphilic block copolymers have been widely investigated in the development of pharmaceutical drug carriers. In particular, thermosensitive gels based on poloxamer 407 (P407) have great potential for periodontal disease treatment, thanks to their ability to be liquid at room temperature and become viscous gels at body temperature. However, some problems, related to short in situ residence time, reduce their feasible clinical use. Thus, in order to improve the effective applicability of these materials, we studied how P407 thermogels are affected by the pH and by the inclusion of different hydrophilic polymers, used as excipients for increasing the gel stiffness. For this scope, a complete chemical-physical characterization of the synthesized gels is provided, in terms of determination of sol-gel transition temperature, viscosity and erosion degree. The data are correlated according to a statistical multivariate approach based on Principal Component Analysis and their mucoadhesion properties are also tested by Tapping mode-Atomic Force Microscopy (TM-AFM) imaging. Finally, we studied how the different P407 formulations are able to influence the release pathway of two antibacterial drugs (i.e., chlorhexidine digluconate and doxycycline hyclate) largely used in oral diseases.

Effects on Muscular Activity after Surgically Assisted Rapid Palatal Expansion: A Prospective Observational Study

The study aims to investigate the modifications in the temporalis and the masseter activity in adult patients before and after SARPE (Surgically Assisted Rapid Palatal Expansion) by measuring electromyographic and electrokinesographic activity. 24 adult patients with unilateral posterior crossbite on the right side were selected from the Orthodontic Department of the University of Milan. Three electromyographic and electrokinesographic surface readings were taken respectively before surgery (T0) and 8 months after surgery (T1). The electromyographic data of both right and left masseter and anterior temporalis muscles were recorded during multiple tests: standardized maximum voluntary contraction (MVC)s, after transcutaneous electrical nerve stimulation (TENS) and at rest. T0 and T1 values were compared with paired Student’s t-test (p < 0.05). Results: Significant differences were found in the activity of right masseter (p = 0.03) and right temporalis (p = 0.02) during clench, in the evaluation of right masseter at rest (p = 0.03), also the muscular activity of masseters at rest after TENS from T0 to T1 (pr = 0.04, pl = 0.04). No significant differences were found in the activity of left masseter (p = 0.41) and left temporalis (p = 0.39) during clench and MVC, in the evaluation of left masseter at rest (p = 0.57) and in the activity during MVC of right masseter (p = 0.41), left masseter (p = 0.34), right temporalis (p = 0.51) and left temporalis (p = 0.77). Results showed that the activity of the masseter and temporalis muscles increased significantly after SARPE during rest and clenching on the side where the cross-bite was treated.

3D Cephalometric Normality Range: Auto Contractive Maps (ACM) Analysis in Selected Caucasian Skeletal Class I Age Groups

The objective of this paper is to define normal values of a novel 3D cephalometric analysis and to define the links through an artificial neural network (ANN). Methods: One hundred and fifteen CBCTs of Class I young patients, distributed among gender-adjusted developmental groups, were selected. Three operators identified 18 cephalometric landmarks from which 36 measurements were obtained. The repeatability was assessed through the ICC. Two-dimensional values were extracted by an automatic function, and the mean value and standard deviation were compared by paired Student’s t-tests. Correlation coefficient gave the relationships between 2D and 3D measurements for each group. The values were computed with the ANN to evaluate the parameters normality link and displayed by Pajek software. Results: The ICC assessed an excellent (≥0.9) repeatability. Normal values were extracted, and compared with 2D measurements, they showed a high correlation on the mid-sagittal plane, reaching 1.00, with the lowest 0.71 on the lateral plane. The ANN showed strong links between the values with the centrality of the go-sagittal plane compared to the rest. Conclusions: The study provides a set of 3D cephalometric values obtained by the upper and lower 95% CI for the mean divided into the developmental stage subgroups. The two-dimensional measurements showed variable concordance, while the ANN showed a centrality between the parameters.

Innovative Concepts and Recent Breakthrough for Engineered Graft and Constructs for Bone Regeneration: A Literature Systematic Review

Background: For decades, regenerative medicine and dentistry have been improved with new therapies and innovative clinical protocols. The aim of the present investigation was to evaluate through a critical review the recent innovations in the field of bone regeneration with a focus on the healing potentials and clinical protocols of bone substitutes combined with engineered constructs, growth factors and photobiomodulation applications. Methods: A Boolean systematic search was conducted by PubMed/Medline, PubMed/Central, Web of Science and Google scholar databases according to the PRISMA guidelines. Results: After the initial screening, a total of 304 papers were considered eligible for the qualitative synthesis. The articles included were categorized according to the main topics: alloplastic bone substitutes, autologous teeth derived substitutes, xenografts, platelet-derived concentrates, laser therapy, microbiota and bone metabolism and mesenchymal cells construct. Conclusions: The effectiveness of the present investigation showed that the use of biocompatible and bio-resorbable bone substitutes are related to the high-predictability of the bone regeneration protocols, while the oral microbiota and systemic health of the patient produce a clinical advantage for the long-term success of the regeneration procedures and implant-supported restorations. The use of growth factors is able to reduce the co-morbidity of the regenerative procedure ameliorating the post-operative healing phase. The LLLT is an adjuvant protocol to improve the soft and hard tissues response for bone regeneration treatment protocols.

A comparison between stereophotogrammetry and smartphone structured light technology for three-dimensional face scanning

OBJECTIVES

To compare three-dimensional facial scans obtained by stereophotogrammetry with two different applications for smartphone supporting the TrueDepth system, a structured light technology.

MATERIALS AND METHODS

Facial scans of 40 different subjects were acquired with three different systems. The 3dMDtrio Stereophotogrammetry System (3dMD, Atlanta, Ga) was compared with a smartphone (iPhone Xs; Apple, Cupertino, Calif) equipped with the Bellus3D Face Application (version 1.6.11; Bellus3D Inc, Campbell, Calif) or Capture (version 1.2.5; Standard Cyborg Inc, San Francisco, Calif). Times of image acquisition and elaboration were recorded. The surface-to-surface deviation and the distance between 18 landmarks from 3dMD reference images to those acquired with Bellus3D or Capture were measured.

RESULTS

Capturing and processing times with the smartphone applications were considerably longer than with the 3dMD system. The surface-to-surface deviation analysis between the Bellus3D and 3dMD showed an overlap percentage of 80.01% ± 5.92% and 56.62% ± 7.65% within the ranges of 1 mm and 0.5 mm discrepancy, respectively. Images from Capture showed an overlap percentage of 81.40% ± 9.59% and 56.45% ± 11.62% within the ranges of 1 mm and 0.5 mm, respectively.

CONCLUSIONS

The face image acquisition with the 3dMD device is fast and accurate, but bulky and expensive. The new smartphone applications combined with the TrueDepth sensors show promising results. They need more accuracy from the operator and more compliance from the patient because of the increased acquisition time. Their greatest advantages are related to cost and portability.

Effects of Composite Attachments on Orthodontic Clear Aligners Therapy: A Systematic Review

This systematic review aims to highlight the differences between different clear aligner therapies that differ in the presence of attachments or in attachment configuration. Eight electronic databases were searched up to March 2020. Two authors independently proceeded to study selection, data extraction, and risk of bias assessment. The analysis of the results was carried out examining six groups of movements (mesio-distal tipping/bodily movement; anterior bucco-lingual tipping/root torque; posterior bucco-lingual tipping/expansion; intrusion; extrusion; rotation). Five clinical trials were selected and all of them showed a medium risk of bias. Literature showed that attachments mostly increase the effectiveness of orthodontic treatment with clear aligners, improving anterior root torque, rotation, and mesio-distal (M-D) movement; they are also important to increase posterior anchorage. However, some articles showed contradictory or not statistically significant results. Attachments also seem to improve intrusion, but the evidence about this movement, as well as extrusion, is lacking. No studies evaluated posterior bucco-lingual tipping/expansion. Further clinical trials are strongly suggested to clarify the influence of attachments and their number, size, shape, and position on each orthodontic movement.

Scoping review on the role and interactions of hydroxytyrosol and alpha-cyclodextrin in lipid-raft-mediated endocytosis of SARS-CoV-2 and bioinformatic molecular docking studies

OBJECTIVE

The aim of the study was to show the effect that two naturally occurring compounds, a cyclodextrin and hydroxytyrosol, can have on the entry of SARS-CoV-2 into human cells.

MATERIALS AND METHODS

The PubMed database was searched to retrieve studies published from 2000 to 2020, satisfying the inclusion criteria. The search keywords were: SARS-CoV, SARS-CoV-2, coronavirus, lipid raft, endocytosis, hydroxytyrosol, cyclodextrin. Modeling of alpha-cyclodextrin and hydroxytyrosol were done using UCSF Chimera 1.14.

RESULTS

The search results indicated that cyclodextrins can reduce the efficiency of viral endocytosis and that hydroxytyrosol has antiviral properties. Bioinformatic docking studies showed that alpha-cyclodextrin and hydroxytyrosol, alone or in combination, interact with the viral spike protein and its host cell receptor ACE2, thereby potentially influencing the endocytosis process.

CONCLUSIONS

Hydroxytyrosol and alpha-cyclodextrin can be useful against the spread of SARS-CoV-2.

COVID-19 Infection in Children, Infants and Pregnant Subjects: An Overview of Recent Insights and Therapies

BACKGROUND

The SARS-CoV-2 pandemic has involved a severe increase of cases worldwide in a wide range of populations. The aim of the present investigation was to evaluate recent insights about COVID-19 infection in children, infants and pregnant subjects.

METHODS

a literature overview was performed including clinical trials, in vitro studies, reviews and published guidelines regarding the present paper topic. A descriptive synthesis was performed to evaluate recent insights and the effectiveness of therapies for SARS-CoV-2 infection in children, infants and pregnant subjects.

RESULTS

Insufficient data are available regarding the relationship between COVID-19 and the clinical risk of spontaneous abortion and premature foetus death. A decrease in the incidence of COVID-19 could be correlated to a minor expression of ACE2 in childrens' lungs. At present, a modulation of the dose-effect posology for children and infants is necessary.

CONCLUSIONS

Pregnant vertical transmission has been hypothesised for SARS-CoV-2 infection. Vaccines are necessary to achieve mass immunity for children and also pregnant subjects.

Cannabinoids Drugs and Oral Health-From Recreational Side-Effects to Medicinal Purposes: A Systematic Review

Background: marijuana, the common name for cannabis sativa preparations, is one of the most consumed drug all over the world, both at therapeutical and recreational levels. With the legalization of medical uses of cannabis in many countries, and even its recreational use in most of these, the prevalence of marijuana use has markedly risen over the last decade. At the same time, there is also a higher prevalence in the health concerns related to cannabis use and abuse. Thus, it is mandatory for oral healthcare operators to know and deal with the consequences and effects of cannabis use on oral cavity health. This review will briefly summarize the components of cannabis and the endocannabinoid system, as well as the cellular and molecular mechanisms of biological cannabis action in human cells and biologic activities on tissues. We will also look into oropharyngeal tissue expression of cannabinoid receptors, together with a putative association of cannabis to several oral diseases. Therefore, this review will elaborate the basic biology and physiology of cannabinoids in human oral tissues with the aim of providing a better comprehension of the effects of its use and abuse on oral health, in order to include cannabinoid usage into dental patient health records as well as good medicinal practice. Methods: the paper selection was performed by PubMed/Medline and EMBASE electronic databases, and reported according to the PRISMA guidelines. The scientific products were included for qualitative analysis. Results: the paper search screened a total of 276 papers. After the initial screening and the eligibility assessment, a total of 32 articles were considered for the qualitative analysis. Conclusions: today, cannabis consumption has been correlated to a higher risk of gingival and periodontal disease, oral infection and cancer of the oral cavity, while the physico-chemical activity has not been completely clarified. Further investigations are necessary to evaluate a therapeutic efficacy of this class of drugs for the promising treatment of several different diseases of the salivary glands and oral diseases.

Behavior of Soft Tissue around Platform-Switched Implants and Non-Platform-Switched Implants: A Comparative Three-Year Clinical Study

To verify the influence of platform-switching (PS) on soft tissue behavior by comparing the soft tissue stability around implants with and without PS, during three years of follow-up. The study included patients treated with fixed dentures supported by implants with an internal connection. The radiographic distance between the first bone-to-implant contact (FBIC) and the implant shoulder was assessed. Additionally, the presence of keratinized facial mucosa and the prosthetic crown height (TH) were monitored for three years from the delivery of the definitive crown. These parameters were measured for two different groups: platform-switched implants in the PS group and non-platform-switched (NPS) implants in the NPS group. Seventy-seven implants were considered in the statistical analysis. After three years, the overall FBIC mean value was 0.31 ± 1.00 mm. However, the mean FBIC was 0.66 ± 0.97 mm for the NPS group and -0.05 ± 0.91 mm for the PS group. Moreover, a mean recession of 0.54 ± 1.39 mm was measured for the NPS group, whereas a mean coronal migration of 0.17 ± 0.95 mm was measured for the PS group. A significant correlation was also found between the presence of PS and ΔTH (p ≤ 0.01) over the three years of follow-up. The absence or presence of platform-switching would appear to affect the tendency of the gingival buccal margin towards recession or creeping. Additionally, implant-abutment platform-switching seems to help prevent peri-implant soft tissue recession over time when compared to implants without PS.

Fully automatic segmentation of sinonasal cavity and pharyngeal airway based on convolutional neural networks

INTRODUCTION

This study aimed to test the accuracy of a new automatic deep learning-based approach on the basis of convolutional neural networks (CNN) for fully automatic segmentation of the sinonasal cavity and the pharyngeal airway from cone-beam computed tomography (CBCT) scans.

METHODS

Forty CBCT scans from healthy patients (20 women and 20 men; mean age, 23.37 ± 3.34 years) were collected, and manual segmentation of the sinonasal cavity and pharyngeal subregions were carried out by using Mimics software (version 20.0; Materialise, Leuven, Belgium). Twenty CBCT scans from the total sample were randomly selected and used for training the artificial intelligence model file. The remaining 20 CBCT segmentation masks were used to test the accuracy of the CNN fully automatic method by comparing the segmentation volumes of the 3-dimensional models obtained with automatic and manual segmentations. The accuracy of the CNN-based method was also assessed by using the Dice score coefficient and by the surface-to-surface matching technique. The intraclass correlation coefficient and Dahlberg's formula were used to test the intraobserver reliability and method error, respectively. Independent Student t test was used for between-groups volumetric comparison.

RESULTS

Measurements were highly correlated with an intraclass correlation coefficient value of 0.921, whereas the method error was 0.31 mm³. A mean difference of 1.93 ± 0.73 cm³ was found between the methodologies, but it was not statistically significant (P >0.05). The mean matching percentage detected was 85.35 ± 2.59 (tolerance 0.5 mm) and 93.44 ± 2.54 (tolerance 1.0 mm). The differences, measured as the Dice score coefficient in percentage, between the assessments done with both methods were 3.3% and 5.8%, respectively.

CONCLUSIONS

The new deep learning-based method for automated segmentation of the sinonasal cavity and the pharyngeal airway in CBCT scans is accurate and performs equally well as an experienced image reader.

The 15-Months Clinical Experience of SARS-CoV-2: A Literature Review of Therapies and Adjuvants

BACKGROUND

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the virus responsible for the coronavirus disease of 2019 (COVID-19) that emerged in December 2019 in Wuhan, China, and rapidly spread worldwide, with a daily increase in confirmed cases and infection-related deaths. The World Health Organization declared a pandemic on the 11th of March 2020. COVID-19 presents flu-like symptoms that become severe in high-risk medically compromised subjects. The aim of this study was to perform an updated overview of the treatments and adjuvant protocols for COVID-19.

METHODS

A systematic literature search of databases was performed (MEDLINE PubMed, Google Scholar, UpToDate, Embase, and Web of Science) using the keywords: "COVID-19", "2019-nCoV", "coronavirus" and "SARS-CoV-2" (date range: 1 January 2019 to 31st October 2020), focused on clinical features and treatments.

RESULTS

The main treatments retrieved were antivirals, antimalarials, convalescent plasma, immunomodulators, corticosteroids, anticoagulants, and mesenchymal stem cells. Most of the described treatments may provide benefits to COVID-19 subjects, but no one protocol has definitively proven its efficacy.

CONCLUSIONS

While many efforts are being spent worldwide in research aimed at identifying early diagnostic methods and evidence-based effective treatments, mass vaccination is thought to be the best option against this disease in the near future.

SARS-CoV-2 Disease through Viral Genomic and Receptor Implications: An Overview of Diagnostic and Immunology Breakthroughs

The SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2), which is believed to have originated in China towards the end of November 2019, has now spread across the globe, causing a pandemic in 192 countries. The World Health Organization has called it the SARS-CoV-2 pandemic. Rapid dissemination of the virus occurs mainly through the saliva (Flügge's droplets) and aerosol, together with nasal and lachrymal passages. The literature associated with the recent advancement in terms of rapid diagnostics and SARS-CoV-2 vaccines has thoroughly studied the role of ACE2 receptors and Furin, as well as viral agent access into the host cell and its significant persistence at the level of the oral mucosa, which represents the main access to the virus. The purpose of this review was to underline the processes of SARS-CoV-2 infection mechanisms and novel breakthroughs in diagnostics and vaccines. Different technologies, such as the RT-PCR molecular test and the antigenic test, have been developed to identify subjects affected by the SARS-CoV-2 in order to improve the tracking of infection geographical diffusion. Novel rapid and highly sensitive diagnostic tests has been proposed for the detection of SARS-CoV-2 to improve the screening capability of suspected contagions. The strengthening of the vaccination campaign represents the most effective means to combat the SARS-CoV-2 infection and prevent severe manifestations of the virus-different classes of vaccines have been developed for this purpose. Further attention on the novel SARS-CoV-2 variant is necessary in order to verify the protection efficacy and virulence reduction of the infective agent in the recent vaccine campaign.

SARS-CoV-2 Disease Adjuvant Therapies and Supplements Breakthrough for the Infection Prevention

The SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2) is a high-risk viral agent involved in the recent pandemic stated worldwide by the World Health Organization. The infection is correlated to a severe systemic and respiratory disease in many cases, which is clinically treated with a multi-drug pharmacological approach. The purpose of this investigation was to evaluate through a literature overview the effect of adjuvant therapies and supplements for the SARS-CoV-2 infection. The research has analyzed the advantage of the EK1C4, by also assessing the studies on the resveratrol, vitamin D, and melatonin as adjuvant supplements for long hauler patients' prognosis. The evaluated substances reported important benefits for the improvement of the immune system and as a potential inhibitor molecules against SARS-CoV-2, highlighting the use of sartans as therapy. The adjuvant supplements seem to create an advantage for the healing of the long hauler patients affected by chronic symptoms of constant chest and heart pain, intestinal disorders, headache, difficulty concentrating, memory loss, and tachycardia.

Serological Profile of Children and Young Adults with at Least One SARS-CoV-2 Positive Cohabitant: An Observational Study

At the end of 2019, a new disease caused by the novel coronavirus SARS-CoV-2 appeared in Wuhan Province in China. Children seemed to be infected less frequently than adults, and family clusters seemed to play an important role in the spread of the pandemic. The aim of this study is to evaluate the serological profile of children and young adults between 4 and 16 years of age in order to assess the transmission patterns of COVID-19 between cohabitants. The subjects lived with at least one cohabitant who tested positive for the disease using a nasopharyngeal swab. To avoid contact with the disease, families were interviewed by telephone. Forty-nine children and adolescents with a mean age of 11 years were then subjected to a rapid lateral flow chromatographic test. Of them, seven (14.3%) were immunoglobulin G (IgG)-positive, and four (8.2%) were immunoglobulin M (IgM)-positive. In total, 16.3% of the tested sample had antibodies against SARS-CoV-2: this may confirm the lower vulnerability of children to COVID-19, despite the small sample size. The time from the negativization of the cohabitant until the test day may have influenced the results, especially when this timeframe is wide.

Recent advances in graphene-based nanobiosensors for salivary biomarker detection

As biosensing research is rapidly advancing due to significant developments in materials, chemistry, and electronics, researchers strive to build cutting-edge biomedical devices capable of detecting health-monitoring biomarkers with high sensitivity and specificity. Biosensors using nanomaterials are highly promising because of the wide detection range, fast response time, system miniaturization, and enhanced sensitivity. In the recent development of biosensors and electronics, graphene has rapidly gained popularity due to its superior electrical, biochemical, and mechanical properties. For biomarker detection, human saliva offers easy access with a large variety of analytes, making it a promising candidate for its use in point-of-care (POC) devices. Here, we report a comprehensive review that summarizes the most recent graphene-based nanobiosensors and oral bioelectronics for salivary biomarker detection. We discuss the details of structural designs of graphene electronics, use cases of salivary biomarkers, the performance of existing sensors, and applications in health monitoring. This review also describes current challenges in materials and systems and future directions of the graphene bioelectronics for clinical POC applications. Collectively, the main contribution of this paper is to deliver an extensive review of the graphene-enabled biosensors and oral electronics and their successful applications in human salivary biomarker detection.

Correlation between Malocclusion and Allergic Rhinitis in Pediatric Patients: A Systematic Review

BACKGROUND

Oral breathing, nasal obstruction and airway space reduction are usually reported as associated to allergic rhinitis. They have been linked to altered facial patterns and dento-skeletal changes. However, no firm correlation based on the evidence has been established. This systematic review has been undertaken to evaluate the available evidence between malocclusion and allergic rhinitis in pediatric patients.

METHODS

The research refers to Preferred Reporting Items for Systematic Reviews and Meta-Analyses Protocols (PRISMA-P) guidelines, databases (Medline, Cochrane Library, Pubmed, Embase and Google Scholar) were screened, the quality was evaluated through Quality Assessment of Diagnosfic Accuracy Studies (QUADAS-2).

RESULTS

The articles selected (6 out of initial 1782) were divided on the basis of the study design: two observational randomized study, three case-control study, one descriptive cross-sectional study, and one longitudinal study. A total of 2188 patients were considered. Different results were reported as related to allergic rhinitis ranging from a higher incidence of dental malocclusion, to an increase of palatal depth, and in posterior cross-bite about anterior open-bite and to longer faces and shorter maxillas.

CONCLUSIONS

Most of the studies selected found a rise in the prevalence of both malocclusion and allergic rhinitis in children. However, the level of bias is high, impaired by a poor design and no conclusive evidence can be drawn.

Pilot study for the evaluation of safety profile of a potential inhibitor of SARS-CoV-2 endocytosis

BACKGROUND AND AIM OF THE WORK

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is responsible for the current pandemics of coronavirus disease. This virus is able to attack the cells of the airway epithelium by binding to the transmembrane angiotensin I converting enzyme 2 (ACE2). We developed an oral spray that could inhibit the SARS-CoV-2 endocytosis. The spray contains hydroxytyrosol for its anti-viral, anti-inflammatory and anti-oxidant properties, and α-cyclodextrin for its ability to deplete sphingolipids, that form the lipid rafts where ACE2 localizes. The aim of the present pilot multi-centric open non-controlled observational study was to evaluate the safety profile of the "Endovir Stop" spray.

METHODS

An MTT test was performed to evaluate cytotoxicity of the spray in two human cell lines. An oxygen radical absorbance capacity assay was performed to evaluate the antioxidant capacity of the spray. The spray was also tested on 87 healthy subjects on a voluntary basis.

RESULTS

The MTT test revealed that the spray is not cytotoxic. The ORAC assay showed a good antioxidant capacity for the spray. Endovir Stop tested on healthy volunteers showed the total absence of side effects and drug interactions during the treatment.

CONCLUSIONS

We demonstrated that Endovir Stop spray is safe. The next step would be the administration of the efficacy of the spray by testing it to a wider range of people and see whether there is a reduced infection rate of SARS-CoV-2 in the treated subjects than in the non-treated individuals.

A pilot study on the preventative potential of alpha-cyclodextrin and hydroxytyrosol against SARS-CoV-2 transmission

BACKGROUND AND AIM OF THE WORK

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is responsible for the current pandemics. This virus attacks the cells by binding to the transmembrane angiotensin I converting enzyme 2. In this study, we experimented a food supplement containing alpha-cyclodextrin and hydroxytyrosol for the improvement of the defenses against the SARS-CoV-2. Hydroxytyrosol has anti-viral properties and is able to reduce the serum lipids in mice. α-cyclodextrin has the ability to deplete sphingolipids and phospholipids from the cellular membranes. The aim of the present preliminary open non-controlled interventional study was to evaluate the efficacy of alpha-cyclodextrin and hydroxytyrosol in improving defenses against SARS-CoV-2.

METHODS

Fifty healthy volunteers at a higher risk of SARS-CoV-2 infection from Northern Cyprus and six positive individuals for SARS-CoV-2 were enrolled in this study. The in silico prediction was performed using D3DOCKING to evaluate the interactions of hydroxytyrosol and alpha-cyclodextrin with proteins involved in the SARS-CoV-2 endocytosis.

RESULTS

The 50 volunteers did not become positive in 15 days for SARS-CoV-2 after the administration of the compound for two weeks, despite they were at higher risk of infection than the general population. Interestingly, in the cohort of six positive patients, two patients were administered the spray and became negative after five days, despite the viral load was higher in the treated subjects than the untreated patients who became negative after ten days. In addition, we identified possible interactions among hydroxytyrosol and alpha-cyclodextrin with the protein Spike and the human proteins ACE2 and TMPRSS2.

CONCLUSIONS

We reported on the results of the possible role of alpha-cyclodextrin and hydroxytyrosol in improving defenses against SARS-CoV-2. The next step will be the administration of the compound to a larger cohort in a controlled study to confirm the reduction of the infection rate of SARS-CoV-2 in the treated subjects.

Electroporation technique for joint pain - Pilot feasibility study on TMD patients

Objective(s)

It is well appreciated that traditional analgesic delivery routes used to treat pain associated with temporomandibular disorder (TMD) often have harmful unintended side effects as a consequence of systemic distribution. Further, localized delivery of analgesic medication via intra‐articular injections involves a different set of issues limiting their clinical viability. As an option, transdermal analgesic delivery provides for prolonged pain relief and flexibility in dose administration, while limiting systemic exposure and minimizing adverse events. Incorporation of a novel electroporation technique may further increase transdermal drug penetration into synovial tissue/fluid and enhance pain reduction. The present feasibility study compares the effectiveness of an electroporation‐enhanced transdermal application of diclofenac sodium to a conventional intra‐articular injection of triamcinolone acetonide suspension (corticosteroids) to treat patients with TMD associated pain.

Methods

Pre‐ and post‐treatment maximal incisal mouth opening (MIO), pain visual analog scale (VAS) and surface electromyography (EMG) of 22 patients treated with electroporation‐enhanced diclofenac and 37 patients treated with corticosteroids injections were collected and analyzed.

Results

In general, patients treated with electroporation exhibited better results in terms of pain improvement (corrected p‐value = .01) compared to the standard treatment, but both methods were similarly effective for improvement of MIO (corrected p‐value = .71) and improvement of all EMG indices (corrected p‐values ≥ .05).

Conclusion

The enhancing effect of electroporation in transdermal delivery of diclofenac sodium was demonstrated by decreased pain, increase MIO and EMG improvement to normal values. Its analgesic and inflammatory results are comparable with standard treatment offered by corticosteroids.

A Call for Action to Safely Deliver Oral Health Care during and Post COVID-19 Pandemic

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) outbreak started just a couple of months ago and it grew rapidly causing several deaths and morbidities. The mechanism behind the transmission of the virus is still not completely understood despite a multitude of new specific manuscripts being published daily. This article highlights the oral cavity as a possible viral transmission route into the body via the Angiotensin converting enzyme 2 receptor. It also provides guidelines for routine protective measures in the dental office while delivering oral health care.

Complex odontoma at the upper right maxilla: Surgical management and histomorphological profile

BACKGROUND

Odontomas are hamartomatous developmental malformations of the dental tissues. Usually asymptomatic, their presence is often revealed on routine radiographs. The study aimed to establish the efficacy of this conventional approach in treating odontomas, analysing clinical outcome, follow-up, and histomorphological profile.

CASE REPORT

A case is presented with a review of the international literature. The patient, aged 8 years, had a complex odontoma localised on the front upper jaw. She was treated following the conventional surgical procedure. Post-operative course and healing were uneventful. Orthodontic treatment was necessary to realign the teeth. At the 12-month follow-up there was no recurrence or failure. Healing was excellent.

CONCLUSION

Variations in normal tooth eruption are a common finding, but significant deviations from established norms should alert the clinician to further investigate the patient's health and development.

Assessing mandibular body changes in growing subjects: a comparison of CBCT and reconstructed lateral cephalogram measurements

The aim of this study is to compare cone-beam computed tomography (CBCT) and bi-dimensional reconstructed lateral cephalograms (RLCs) in assessing mandibular body length and growth and to evaluate how mandibular reshaping influences the error in measuring mandibular body growth in bi-dimensional radiographs. Twenty-five patients with two CBCT scans taken at a mean distance of 2.21 ± 0.5 years were selected. The following measurements were performed: right and left mandibular body length at each point in time, mandibular growth, inter-gonial distance and mandibular symphyseal angle. From each CBCT, an RLC was obtained, and mandibular body length and growth were measured. Data analysis revealed a statistically and clinically significant difference in CBCT and RLC regarding the mandibular length of each patient at each point in time. However, mandibular growth was almost identical. A linear regression was performed to predict growth distortion between RLCs and CBCT depending on the ratio between transverse and sagittal mandibular growth. The expected maximum and minimum distortion, however, appeared not to be significant. In fact, a second linear regression model and a Bland–Altman test revealed a strong correlation between measurements of average mandibular body growth by CBCT and RLCs. As the same distortion occurs in the first and second RLCs, bi-dimensional radiographs remain the method of choice in evaluating mandibular body growth.

Evaluation of Imaging Software Accuracy for 3-Dimensional Analysis of the Mandibular Condyle. A Comparative Study Using a Surface-to-Surface Matching Technique

The aim of this study was to assess the accuracy of 3D rendering of the mandibular condylar region obtained from different semi-automatic segmentation methodology. A total of 10 Cone beam computed tomography (CBCT) were selected to perform semi-automatic segmentation of the condyles by using three free-source software (Invesalius, version 3.0.0, Centro de Tecnologia da Informação Renato Archer, Campinas, SP, Brazil; ITK-Snap, version2.2.0; Slicer 3D, version 4.10.2) and one commercially available software Dolphin 3D (Dolphin Imaging, version 11.0, Chatsworth, CA, USA). The same models were also manually segmented (Mimics, version 17.01, Materialise, Leuven, Belgium) and set as ground truth. The accuracy of semi-automatic segmentation was evaluated by (1) comparing the volume of each semi-automatic 3D rendered condylar model with that obtained with manual segmentation, (2) deviation analysis of each 3D rendered mandibular models with those obtained from manual segmentation. No significant differences were found in the volumetric dimensions of the condylar models among the tested software (p > 0.05). However, the color-coded map showed underestimation of the condylar models obtained with ITK-Snap and Slicer 3D, and overestimation with Dolphin 3D and Invesalius. Excellent reliability was found for both intra-observer and inter-observer readings. Despite the excellent reliability, the present findings suggest that data of condylar morphology obtained with semi-automatic segmentation should be taken with caution when an accurate definition of condylar boundaries is required.

A multicenter, prospective, randomized trial of pain and discomfort during maxillary expansion: Leaf expander versus hyrax expander

BACKGROUND

Pain suffered by the young patient is the most frequent symptom during orthodontic treatment and is the one that most frightens children and causes worry in their families.

AIM

To investigate pain perception and function impairment during the first week of activation of two palatal expansion screws.

DESIGN

A total of 101 subjects were randomly divided into two groups: RME group included patients treated with the standard hyrax expansion screw and LEAF group included patients treated with Leaf Expander appliance. Pain intensity was assessed via the Wong-Baker scale. A questionnaire on oral function impairments was also compiled by the patients.

RESULTS

The Pain Scale analysis showed that patients in the RME group suffered from a significantly higher level of pain than those in the LEAF group (88.6% vs 25%, P < .01). RME group showed highest pain indexes from day 1 to day 4 (51.4% RME vs 9.7% LEAF suffered at least once from strong pain in the first 4 days, P < .01). Furthermore, oral functions were similarly affected in both groups.

CONCLUSIONS

Pain reported during maxillary arch expansion is influenced by clinical activation protocol and by the screw type. Patients treated with Leaf Expander reported significantly lower pain level in the first 7 days of treatment.

Influence of Bone Quality, Drilling Protocol, Implant Diameter/Length on Primary Stability: An In Vitro Comparative Study on Insertion Torque and Resonance Frequency Analysis

The aim of this study was to evaluate the influence of bone quality, drilling technique, implant diameter, and implant length on insertion torque (IT) and resonance frequency analysis (RFA) of a prototype-tapered implant with knife-edge threads. The investigators hypothesized that IT would be affected by variations in bone quality and drilling protocol, whereas RFA would be less influenced by such variables. The investigators implemented an in vitro experiment in which a prototype implant was inserted with different testing conditions into rigid polyurethane foam blocks. The independent variables were: bone quality, drilling protocol, implant diameter, and implant length. Group A implants were inserted with a conventional drilling protocol, whereas Group B implants were inserted with an undersized drilling protocol. Values of IT and RFA were measured at implant installation. IT and RFA values were significantly correlated (Pearson correlation coefficient: 0.54). A multivariable analysis showed a strong model. Higher IT values were associated with drilling protocol B vs A (mean difference: 71.7 Ncm), implant length (3.6 Ncm increase per mm in length), and substrate density (0.199 Ncm increase per mg/cm3 in density). Higher RFA values were associated with drilling protocol B vs A (mean difference: 3.9), implant length (1.0 increase per mm in length), and substrate density (0.032 increase per mg/cm3 in density). Implant diameter was not associated with RFA or IT. Within the limitations of an in vitro study, the results of this study suggest that the studied implant can achieve good level of primary stability in terms of IT and RFA. A strong correlation was found between values of IT and RFA. Both parameters are influenced by the drilling protocol, implant length, and substrate density. Further studies are required to investigate the clinical response in primary stability and marginal bone response.

Available Technologies, Applications and Benefits of Teleorthodontics. A Literature Review and Possible Applications during the COVID-19 Pandemic

Background: COVID-2019 spread rapidly throughout the world from China. This infection is highly contagiousness, has a high morbidity, and is capable of evolving into a potentially lethal form of interstitial pneumonia. Numerous countries shut-down various activities that were considered “not essential.” Dental treatment was in this category and, at the time of writing, only non-deferrable emergencies are still allowed in many countries. Therefore, follow-up visits of ongoing active therapies (e.g., orthodontic treatment) must be handled taking special precautions. This literature review aims at reducing in-office appointments by providing an overview of the technologies available and their reliability in the long-distance monitoring of patients, i.e., teledentistry. Methods: A literature review was made according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses Protocols (PRISMA-P) guidelines. Randomized clinical trials, cross sectional, observational, and case-control studies were evaluated with the Mixed Methods Appraisal Tool for quality assessment and study limitations. Results: A primary search found 80 articles, 69/80 were excluded as non-relevant on the basis of: the abstract, title, study design, bias, and/or lack of relevance. Twelve articles were included in the qualitative analysis. Conclusions: Teleorthodontics can manage most emergencies, reassuring and following patients remotely. The aim set by dental teleassistance was met as it reduced patients’ office visits whilst maintaining regular monitoring, without compromising the results. Although our preliminary findings should be further investigated to objectively evaluate the efficacy, cost-effectiveness, and long-term results, we are confident that teleassistance in orthodontics will have a role to play in the near future.

The step further smile virtual planning: milled versus prototyped mock-ups for the evaluation of the designed smile characteristics

BACKGROUND

Mock-up based approach allows the preview of the aesthetic rehabilitation, however, it is crucial that the mock-up does not differ from the expected aesthetic outcomes. With CAD-CAM technologies, it is possible to directly create mock-ups from virtual planned smile project, with greater accuracy and efficiency compared to the conventional moulded mock-ups. In this study, we investigated the trueness of mock-ups obtained with milling and 3D printing technology and a full digital work-flow system.

METHODS

Ten adults subjects were included and digital smile design/digital wax-up were performed to enhance the aesthetic of maxillary anterior region. Ten milled mock-ups and 10 prototyped mock-ups were obtained from the original .stl file and a digital analysis of trueness was carried out by superimposing the scanned-milled mock-ups and the scanned-prototyped mock-ups to the digital wax-up, according to the surface-to-surface matching technique. Specific linear measurements were performed to investigate and compare the dimensional characteristics of the physical manufactures, the 3D project and the scanned mock-ups. All data were statistically analyzed. A clinical test was also performed to assess the fitting of the final manufacture.

RESULTS

The prototyped mock-ups showed a significant increment of the transversal measurements (p < 0.001) while the milled mock-ups showed a significant increment of all vertical and transversal measurements (p < 0.001). The prototyped mock-ups showed good fitting after clinical tests while none of the milled mock-ups showed good adaptation (no fitting or significant clinical compensation required). Deviation analysis from the original 3D project reported a greater matching percentage for the scanned-milled mock-ups (80,31% ± 2.50) compared to the scanned-prototyped mock-ups (69,17% ± 2.64) (p < 0.001). This was in contrast with the findings from linear measurements as well as from the clinical test and may have been affected by a reductive algorithmic computation after digitization of physical mock-ups.

CONCLUSION

Both prototype and milled mock-ups showed a slight dimensional increment comparing to the original 3D project, with milled-mock-ups showing less fitting after clinical tests. Caution must be taken when assessing the trueness of scanned manufacture since an intrinsic error in the system can underestimate the dimensions of the real object.

Volumetric Changes in the Upper Airways after Rapid and Slow Maxillary Expansion in Growing Patients: A Case-Control Study

The aim is to evaluate changes in the volume of the upper airways before and after slow maxillary expansion (SME) obtained with the flexible properties of a nickel titanium leaf spring and rapid maxillary expansion (RME) with a conventional Hyrax appliance in growing patients. The records of 1200 orthodontic patients undergoing maxillary expansion from 2018 to 2019 were analyzed; among these pre and post treatment CBCT scans of 22 patients (mean age 8.2 ± 0.6 years old) treated by SME were compared with those obtained from 22 patients (mean age 8.1 ± 0.7 years old) treated by RME banded on the second primary molars. The following inclusion criteria were used: Maxillary transverse constriction, good general health, and no previous orthodontic treatment. Volumes of nasal cavity (NCavV), nasopharynx (NsPxV), and right and left maxillary sinuses (MSV) were calculated with ITK-SNAP. Shapiro–Wilk test revealed a normal distribution of data in each group. Paired t-test was used for within-group comparisons and independent t-test for between-group comparisons. Statistically significant increases occurred in NCavV, NsPxV, and MSVs after treatment with both appliances. No statistically significant difference between the appliances occurred in NCavV, NsPxV, and MSVs. Method error was considered negligible (mean intra-operator and inter-operator intraclass correlation coefficient were 0.928 and 0.911, respectively). It appears that both appliances produce similar effects on the different segments of the upper airway tract.

3D cephalometry on reduced FOV CBCT: skeletal class assessment through AF-BF on Frankfurt plane-validity and reliability through comparison with 2D measurements

OBJECTIVES

To test the validity of a novel protocol for 3D sagittal jaw discrepancy assessment (skeletal class determination) through comparison with common 2D indexes by the use of reduced FOV (10 × 10) CBCT which shows at least from the Frankfurt plane to the B point vertically, and from the most anterior between A and B point to Po point horizontally.

METHODS

A sample of CBCT scans of 109 adult patients (46 females; 63 males; mean age 30 years ± 11.6) equally distributed between I, II and III class was selected. Skeletal class was evaluated with specific software using the distance of A and B point's projection (AF-BF) on FHp (Frankfurt horizontal plane) and compared to 2D common indexes (ANB and Witts appraisal). The validity and reliability of the aforementioned analyses were determined using intra-class correlation coefficients, quadratic weighted Cohen's K and sensitivity.

RESULT

A selected range of values of 2.5 ± 2.5 AF-BF showed a solid correlation with the ANB angle (r = 0.846, K = 0.838, p < 0.001) and moderate with Wits appraisal (r = 0.723, K = 0.720, p < 0.001).

CONCLUSIONS

AF-BF showed high reliability in skeletal class determination on reduced FOV CBCT without the use of S and N cephalometric landmarks.

KEY POINTS

• Reduced FOV CT allows skeletal class determination for orthodontic purposes. • A new 3D-reduced FOV cephalometry is proposed. • AF-BF is a reliable alternative to ANB.

Effects on the Facial Growth of Rapid Palatal Expansion in Growing Patients Affected by Juvenile Idiopathic Arthritis with Monolateral Involvement of the Temporomandibular Joints: A Case-Control Study on Posteroanterior and Lateral Cephalograms

BACKGROUND

Juvenile idiopathic arthritis (JIA) affecting temporomandibular joints (TMJ) in growing patients results in maxillofacial deformities, especially if only one condyle has been affected by the rheumatic disease. Mandibular hypoplasia is the most common issue and it may be associated with maxillary hypoplasia. The aim of this retrospective case-control study is to evaluate the effects of rapid maxillary expansion (RME) in these patients.

METHODS

25 growing patients affected by maxillary hypoplasia, currently in a quiescent phase of JIA for at least one year and monolateral involvement of the TMJs, were treated with RME. Data gathered from posteroanterior and lateral cephalograms before and after 1 year from RME were compared to those of 25 non-JIA controls.

RESULTS

Nasal cavity width, maxillary width and upper and lower intermolar width statistically increased. Maxillary and mandibular symmetry indexes presented a statistically significant increase, so did the skeletal class. No signs or symptoms of TMJ activity of JIA occurred according to Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) criteria. No difference was found when comparing JIA and non-JIA patients apart from the better improvement of several mandibular symmetry indexes in the affected TMJ side of JIA patients. This event is allegedly due to a worse baseline asymmetry in JIA patients that underwent a bigger relative improvement after treatment.

CONCLUSIONS

Results suggest that solving maxillary hypoplasia and, therefore, premature contacts are likely to have allowed mandibular repositioning and condylar growth. RME is a safe and effective solution that can substantially improve maxillary and mandibular symmetry in growing patients affected by JIA with TMJ involvement.

Relationship between molar deciduous teeth infraocclusion and mandibular growth: A case-control study

AIM

As the effects of infraocclusion on mandibular growth could have a significant impact on the treatment planning made by the orthodontist, the aim of this study is to evaluate the correlation between infraocclusion and mandibular growth.

MATERIALS AND METHODS

Study design: A total of 42 healthy Caucasian patients with no history of dental trauma or orthodontic treatment were selected for this study from the same paediatric dentistry department. These patients were divided in two groups based on the presence or absence of infraocclusion: Group A, 22 patients (12 males and 10 females) suffering from infraocclusion of at least one inferior deciduous molar, and Group B, 20 patients (9 males and 11 females) who did not suffer from infraocclusion but had to be treated for dental overcrowding. Each patient was examined through an orthopantomography scan and lateral cephalogram. All measurements were made before the start of the treatment, and they were analysed in order to show cephalometric correlation between the skeletal class, the vertical dimension and cranio-maxillo-mandibular divergence.

RESULTS

According to Student's t-test, the only measurements which had a statistically significant difference between Group A and Group B were the SNB angle (p-value <0.01), the ANB angle (p-value <0.05) and the PC-GO-GN angle (p-value <0.05).

CONCLUSION

From the data collected in this study, it is possible to conclude that patients suffering from infraocclusion of the mandibular deciduous molars show mandibular post-rotation and an increased total Gonial angle, compared to patients who do not suffer from infraocclusion. Despite the absence of a longer-term evaluation of these patients, thanks to this data it is possible to state that early diagnosis of infraocclusion is fundamental in order to apply a well-planned and thought-out orthodontic treatment.

Three-Dimensional Evaluation of Maxillary Sinus Changes in Growing Subjects: A Retrospective Cross-Sectional Study

This study aims to evaluate changes of maxillary sinuses in growing subjects. Cone Beam Computed Tomography (CBCT) scans of 146 patients were divided according to gender and age (6–8, 9–11, 12–14 years old). Left, right and total maxillary sinus volume (MSV-R, MSV-L, MSV-Tot) and surface (MSS-R, MSS-L, MSS-Tot), left and right linear maximum width (LMW-L, LMW-R), depth (LMD-R, LMD-L) and height (LMH-R, LMH-R) were calculated using Mimics Research 22. Kruskal–Wallis Test and showed a statistically significant increase in both genders for all variables. Pairwise comparisons in females are always statistically significant in: LMH-R, LMH-R, MSS-Tot, MSV-Tot. All other variables showed a statistical significant increase between 9–11 and 12–14, and between 6–8 and 12–14 age groups, apart from LMSW-R, LMSW-L, LMSD-R, LMSD-L between 6–8 and 12–14 age groups. Pairwise comparisons in males are always and only statistically significant between 9–11 and 12–14, and between 6–8 and 12–14 groups. Symmetrical measurements (right and left) evaluated using Wilcoxon test retrieved no statistical significant difference. Comparisons between measurements on male and female subjects using Mann–Whitney test showed a statistical significant difference in 6–8 years group in MSV-R, MSV-L and MSV-Tot, and in 12–14 age group in MSV-R, MSV-L, MSV-Tot, MSS-r, MSS-l, MSS-Tot, MSW-R, MSW-L, MSD-R, MSD-L. Intraclass Correlation Coefficient (ICC) assessing inter-operator and intra-operator concordance retrieved excellent results for all variables. It appears that maxillary sinus growth resembles the differential peak of growth in male and female subjects. Sinuses starts to develop early in female subjects. However, in the first and last age group female sinuses are statistically significantly smaller compared to male ones. In male subjects, sinus growth occurs mainly between the second and third age group whilst in female subjects it starts between the first and second age group and continues between the second and the last. Sinus has a vertical development during the peak of growth, which is the main reason for its increase in volume.

Correlation between facial growth patterns and cortical bone thickness assessed with cone-beam computed tomography in young adult untreated patients

Background

The vertical facial growth pattern is one of the most important issue in the orthodontic diagnosis and treatment. Previous studies investigated the association between interdental bone thickness and facial divergence using mainly bidimensional analysis. When two-dimensional dental radiographic views are not sufficient for diagnosis and measurements, cone-beam computed tomography (CBCT) images should be used to assess the alveolar bone structure three-dimensionally and with high accuracy and reliability.

The aim of the present study was to evaluate the correlation between alveolar bone thickness and facial divergence in young adults untreated patients using a three-dimensional method analysis with CBCT images.

Methods

Records of 30 untreated patients (mean age 16 ± 2 years) with Angle Class I and mild to moderate crowding were analyzed. Subjects were classified as hypodivergent (<39˚), normodivergent (41 ± 2˚), and hyperdivergent (>43°). according to the inter-maxillary angle between the sagittal maxillary plane (ANS-PNS) and the mandibular plane (GN-ME). The alveolar bone thickness measurements were taken for the buccal and palatal/lingual surfaces of maxillary and mandibular anterior teeth. Axial-guided navigation (AGN) was used to locate all landmarks using a specific software (Horos 3.0).

Results

The statistical analysis showed a significant difference between the hypodivergent and hyperdivergent group regarding buccal bone height (P = 0.005), buccal apical bone thickness (P = 0.003) and palatal mid-root bone thickness (P = 0.006). Moreover, buccal bone height (P = 0.006) was found to be statistically significant different in normodivergent compared with hypodivergent individuals.

Conclusions

Facial types were found to be correlated with alveolar bone thickness. The hyperdivergent subjects presented thinner alveolus bone in the anterior maxilla and at almost all sites in the mandible. Clinicians should be aware of the possibility of thin cortical bone plates in hyperdivergent patients, reducing antero-posterior movements to avoid fenestration and dehiscence.

Correlation between Buccal Bone Thickness at Implant Placement in Healed Sites and Buccal Soft Tissue Maturation Pattern: A Prospective Three-Year Study

Background: Optimal aesthetic implant restoration is a combination of a visually pleasing prosthesis and adequate surrounding peri-implant soft tissue architecture. This study describes the influence of the residual buccal bone thickness (BBT), measured at the time of implant placement, on the soft tissue maturation during three years of follow-up. Methods: Seventy-eight implants were enrolled in the present study. The BBT was assessed at the surgical stage and each case assigned to Group 1 (BBT values ≤0.5 mm), Group 2 (BBT values >0.5 and <1.5 mm), or Group 3 (BBT values ≥1.5 mm). Only native bone and healed sites were included. The tooth height (TH), based on the distance between the buccal free gingival margin at the zenith level and the crown incisal edge, according to the main axis of the tooth, was monitored at one, two, and three years from the final prosthodontic rehabilitation to determine any occurrence of recession or coronal repositioning of the gums over time. A Pearson Two-Tailed test was applied and the significance level set at p ≤ 0.05. Results: For BBT values ≤0.5 mm, the buccal gum at three years showed an average recession of 1.22 ± 0.41 mm. For BBT values >0.5 and <1.5 mm, the buccal gum also showed recession of 0.64 ± 0.29 mm. In contrast, for BBT values ≥1.5 mm, the buccal gum showed coronal growth of 0.77 ± 0.22 mm. The differences between the groups were significant (p ≤ 0.01) at all times. Conclusion: The BBT at the time of implant placement was found to affect the buccal gingival margin stability over three years of observation.

Rapid Maxillary Expander and Eruption Guidance Appliance therapy in skeletal Class II: cephalometric considerations

AIM

The use of rapid maxillary expander (RME) combined with eruption guidance appliances (EGA) represents a valid method in the treatment of skeletal Class II deep bite patients. In this paper a retrospective cephalometric study of the effects of RME and EGA therapy in Class II deep bite patients is described and compared with the treatment effects of patients with the same malocclusion treated only by RME.

MATERIALS AND METHODS

Pre and post treatment cephalometric radiographs of 47 Class II division 1 deep bite growing patients treated with RME followed by EGA (mean age 9.65 years) (Group 1) were compared with those obtained from a control group (Group 2) of 44 patients (mean age 9.34 years) treated with RME only. The following cephalometric values were analized: SNA; SNB; ANB; SN-PNS.ANS; SN-Go.GN; N-Me; S-Go.

RESULTS

Improvement in maxillo-mandibular relationship was observed in both groups with significantly higher decrease of SNA and ANB in group 1. The cranio-maxillary relation shows a tendency to grow downward and backward in both groups. Both anterior and posterior total facial heights showed a significant increase in group 1.

CONCLUSIONS

RME followed by EGA therapy in Class II skeletal deep bite patients has shown better results compared with RME therapy without functional appliance.

Correlation between Dental Vestibular-Palatal Inclination and Alveolar Bone Remodeling after Orthodontic Treatment: A CBCT Analysis

The aim of this study was to evaluate the correlation between dental vestibular-palatal inclination changes and the cortical bone remodeling after fixed orthodontic treatment using cone beam computed tomography (CBCT). Twenty-two patients with Angle Class I malocclusion, permanent dentition, and mild to moderate dental crowding were included in the present three-dimensional (3D) analysis. Bone dimensions were evaluated by CBCT scans obtained before and after orthodontic treatment, whereas the torque values were calculated by means of digital models using the 3D VistaDent software. A paired t-test was used to compare the changes between the pretreatment and post-treatment measurements. The correlations between variables were analyzed with linear regression analysis. A significant correlation between torque variations and bone thickness changes was observed for the apical buccal level of the anterior side (P < 0.05). Limited and not significant alveolar bone resorption for the apical thickness of anterior teeth occurred at ± 5 degrees of torque variation, while for tooth inclination exceeding +5 or -5 degrees, the bone remodeling was more evident. The present study demonstrated that anterior region was the most affected area by bone remodeling and that torque variation was highly related to apical bone thickness adaptation for maxillary and mandibular incisors and maxillary canines.

Lymphangioma of the tongue associated with open bite: case report

BACKGROUND

Lymphangioma of the tongue is a rare condition related to congenital malformations of the lymphatic system. It may have different implications such as macroglossia. This condition could exacerbate in aesthetic abnormalities and functional problems such as maxillofacial structural deformities, dysphagia, airway obstruction and speech difficulties. The aim of this paper is to describe this disease by means of a case report.

CASE REPORT

A 4-year-old patient was referred to our department presenting macroglossia, functional difficulty during swallowing and mastication, speech disturbances, airway obstruction, and deformities of the maxillofacial structures. Diagnosis of lymphangioma was confirmed by biopsy. After surgical removal of the lesion, the patient was treated with rapid palatal expansion, functional appliance with lingual grid and fixed multibracket appliance. After treatment, improvement in function, indicated by the gradual increase in occlusal force, could be taken as a positive sign of stability.

CONCLUSION

The 3-step treatment protocol described in this article proves to be effective in controlling the malocclusion in the three planes of the space in a patient affected by lymphangioma of the tongue.

RME: effects on the nasal septum. A CBCT evaluation

AIM

Three-dimensional images have been evaluated to study the changes that occur on the maxillary complex and the nasal septum, following rapid maxillary expansion (RME) in growing children.

METHODS

The records of 39 consecutively treated patients (20 male, 19 female), aged between 6.2 and 12.3 years (mean 8.6 years, S.D. 1.5), presenting a septal deviation of more than 1 mm, were analysed. Each patient was scanned at two distinct periods. The first image (T0) was obtained before treatment and hence represented the patient's baseline condition prior to expansion. The second time point (T1) was set after removal of the expander. The skeletal modifications induced by RME have been evaluated via cephalometric tracings obtained at T0 and at T1. The time lapse between T0 and T1 was 12 months.

RESULTS

The nasal septum has been modified in its length more significantly in its lower rather than its upper tract. The width of the piriform aperture increased of 1.58 mm with an increase in the lateral walls and a downward movement of the nasal floor (consequent to an increase in septal length). There was also a reduction of septal deviation. The control group measurements did not vary during the considered period.

CONCLUSION

Evidences of this study suggest that RME procedures can result in: a potentially positive effect on the nasal septum asymmetry during childhood; an increase of the nasal cavity volume due to a downward and forward movement; a lateral inclination of the nasal cavity reducing air resistance and improving breathing pattern; an increase of the length of the septum in its lower third improving its possible deviations and growth disturbances; favourable effects on the growth of the entire maxillary complex.

Implant-Supported Immediately Loaded Complete Arch Rehabilitations with a Mean Follow-up of 10 Years: A Prospective Clinical Study

PURPOSE

To evaluate the complication-free and failure-free survival rates of porcelain fused to zirconia (PFZ) and all-resin complete arch fixed implant-supported prostheses over a mean follow-up of 10 years.

MATERIAL AND METHODS

Subjects with either all-resin or PFZ complete arch fixed implant-supported prostheses on 4 or 6 implants were followed prospectively for 10 years. Cumulative survival rates of prostheses without any catastrophic mechanical complications (resolved without replacing the prosthesis) and free of prosthesis failure (requiring the replacement or removal of the prosthesis) were calculated using life table analysis for up to 10-year period. Additional descriptive variables for various prosthesis events were recorded, such as sex, smoking and drinking status of subjects.

RESULTS

A total of 36 subjects with a total of 68 prostheses (53 all-resin and 15 PFZ) were available for evaluation with a mean follow-up of 10 years (SD 1.47; range: 8-13 years). The study registered an overall 90% prostheses survival rate-78% for males and 94% for females; 91% for PFZ and 87% for all-resin; and a 31% complication-free prosthesis survival rate-13% for males and 38% for females; 29% for PFZ and 31% for all-resin at 10 years. A slight decrease in survival rate was identified in the first 3 years since the initial treatment (from 100% to 93%). The number of complications increased with time, especially after the 6th year after the initial treatment.

CONCLUSION

Despite the number of reparable mechanical complications, the results confirmed the long-lasting features of both PFZ and all-resin complete arch fixed implant-supported prostheses over a 10-year period. There was however an increased number of mechanical complications after 6 years which may entail additional treatment cost for patients.

Comparison of a tridimensional cephalometric analysis performed on 3T-MRI compared with CBCT: a pilot study in adults

OBJECTIVE

Since the introduction of cone-beam computed tomography (CBCT) in dentistry, this technology has enabled distortion-free three-dimensional cephalometric analysis for orthodontic and orthognathic surgery diagnosis. However, CBCT is associated with significantly higher radiation exposure than traditional routine bidimensional examinations for orthodontic diagnosis, although low-dose protocols have markedly reduced radiation exposure over time. The objective of this preliminary feasibility study is to compare the accuracy and diagnostic capabilities of an already-validated three-dimensional cephalometric analysis on CBCT to those of an analysis on 3-T magnetic resonance imaging (3T-MRI) to assess whether the latter can deliver a comparable quality of information while avoiding radiation exposure.

MATERIALS AND METHODS

In order to test the feasibility of three-dimensional cephalometry on 3T-MRI, 18 subjects (4 male; 14 female) with mean age 37.8 ± SD 10.2, who had undergone both maxillofacial CBCT and maxillofacial 3T-MRI for various purposes within 1 month, were selected from the archive of the Department of Dentistry and Maxillofacial Surgery of Fondazione Ospedale Policlinico Maggiore, IRCCS, Milano, Italy. A three-dimensional cephalometric analysis composed of ten midsagittal and four bilateral landmarks and 24 measurements (11 angular, 13 linear) was performed on both scans using Mimics Research® v. 17.0 (NV, Technologielaan 15, 3001 Leuven, Belgium). Cephalometric analysis was performed twice by two independent orthodontists for each scan, and each orthodontist repeated the measurements 3 weeks later. Statistical analysis was performed with SPSS® 20.00 for Windows (IBM® Corporation, Sommers, NY, USA). A Bland-Altman test for each cephalometric value was performed to assess the agreement between the procedures. The intraclass correlation coefficient (ICC) was used to assess interobserver and intraobserver reliability. The coefficient of variation was used to evaluate precision.

RESULTS

Both procedures showed good reliability, with mean intraobserver ICCs of 0.977/0.971 for CBCT and 0.881/0.912 for MRI. The average interobserver ICCs were 0.965 for CBCT and 0.833 for MRI. A Bland-Altman analysis for the cephalometric tracing revealed a similar range of agreement between the two modalities; the bias range (mean ± SD) was - 0.25-0.66 mm (0.174 ± 0.31) for distances and - 0.41-0.54° (0.12 ± 0.33) for angles.

CONCLUSIONS

Within the main limitation of this pilot study, that is, the small sample, it is possible to state that cephalometric measurements on 3T-MRI seem to possess adequate reliability and repeatability and that they show satisfying agreement with values measured on CBCTs. An MRI examination does not expose patients to ionizing radiation and could provide an alternative to CBCT for three-dimensional cephalometrics in the future.