Electron Glass Phase with Resilient Zhang-Rice Singlets in LiCu_{3}O_{3}

LiCu_{3}O_{3} is an antiferromagnetic mixed valence cuprate where trilayers of edge-sharing Cu(II)O (3d^{9}) are sandwiched in between planes of Cu(I) (3d^{10}) ions, with Li stochastically substituting Cu(II). Angle-resolved photoemission spectroscopy (ARPES) and density functional theory reveal two insulating electronic subsystems that are segregated in spite of sharing common oxygen atoms: a Cu d_{z^{2}}/O p_{z} derived valence band (VB) dispersing on the Cu(I) plane, and a Cu 3d_{x^{2}-y^{2}}/O 2p_{x,y} derived Zhang-Rice singlet (ZRS) band dispersing on the Cu(II)O planes. First-principle analysis shows the Li substitution to stabilize the insulating ground state, but only if antiferromagnetic correlations are present. Li further induces substitutional disorder and a 2D electron glass behavior in charge transport, reflected in a large 530 meV Coulomb gap and a linear suppression of VB spectral weight at E_{F} that is observed by ARPES. Surprisingly, the disorder leaves the Cu(II)-derived ZRS largely unaffected. This indicates a local segregation of Li and Cu atoms onto the two separate corner-sharing Cu(II)O_{2} sub-lattices of the edge-sharing Cu(II)O planes, and highlights the ubiquitous resilience of the entangled two hole ZRS entity against impurity scattering.

Considerations for the development of guidance on dose level selection for developmental and reproductive toxicity studies

In 2022, the European Chemicals Agency issued advice on the selection of high dose levels for developmental and reproductive toxicity (DART) studies indicating that the highest dose tested should aim to induce clear evidence of reproductive toxicity without excessive toxicity and severe suffering in parental animals. In addition, a recent publication advocated that a 10% decrease in body weight gain should be replaced with a 10% decrease in bodyweight as a criterion for dose adequacy. Experts from the European Centre for Ecotoxicology and Toxicology of Chemicals evaluated these recent developments and their potential impact on study outcomes and interpretation and identified that the advice was not aligned with OECD test guidelines or with humane endpoints guidance. Furthermore, data analysis from DART studies indicated that a 10% decrease in maternal body weight during gestation equates to a 25% decrease in body weight gain, which differs from the consensus of experts at a 2010 ILSI/HESI workshop. Dose selection should be based on a biological approach that considers a range of other factors. Excessive dose levels that cause frank toxicity and overwhelm homeostasis should be avoided as they can give rise to effects that are not relevant to human health assessments.

Towards Two-Photon Polymerization-Compatible Diffractive Optics for Micro-Mechanical Applications

Diffractive optics are structured optical surfaces that manipulate light based on the principles of interference and diffraction. By carefully designing the diffractive optical elements, the amplitude, phase, direction, and polarization of the transmitted and reflected light can be controlled. It is well-known that the propagation of light through diffractive optics is sensitive to changes in their structural parameters. In this study, a numerical analysis is conducted to evaluate the capabilities of slanted-wire diffraction gratings to function opto-mechanically in the infrared spectral range. The slanted wire array is designed such that it is compatible with fabrication by two-photon polymerization, a direct laser-writing approach. The modeled optical and mechanical capabilities of the diffraction grating are presented. The numerical results demonstrate a high sensitivity of the diffracted light to changes in the slant angle of the wires. The compressive force by which desired slant angles may be achieved as a function of the number of wires in the grating is investigated. The ability to fabricate the presented design using two-photon polymerization is supported by the development of a prototype. The results of this study suggest that slanted-wire gratings fabricated using two-photon polymerization may be effective in applications such as tunable beam splitting and micro-mechanical sensing.

Mechanical Control of the Optical Bandgap in One-Dimensional Photonic Crystals

Over the last several years, two-photon polymerization has been a popular fabrication approach for photonic crystals due to its high spatial resolution. One-dimensional photonic crystals with photonic bandgap reflectivities over 90% have been demonstrated for the infrared spectral range. With the success of these structures, methods which can provide tunability of the photonic bandgap are being explored. In this study, we demonstrate the use of mechanical flexures in the design of one-dimensional photonic crystals fabricated by two-photon polymerization for the first time. Experimental results show that these photonic crystals provide active mechanically induced spectral control of the photonic bandgap. An analysis of the mechanical behavior of the photonic crystal is presented and elastic behavior is observed. These results suggest that one-dimensional photonic crystals with mechanical flexures can successfully function as opto-mechanical structures.

Microwave graph analogs for the voltage drop in three-terminal devices with orthogonal, unitary, and symplectic symmetry

Transmission measurements through three-port microwave graphs are performed, in analogy to three-terminal voltage drop devices with orthogonal, unitary, and symplectic symmetry. The terminal used as a probe is symmetrically located between two chaotic subgraphs, and each graph is connected to one port, the input and the output, respectively. The analysis of the experimental data clearly exhibits the weak localization and antilocalization phenomena. We find a good agreement with theoretical predictions, provided that the effects of dissipation and imperfect coupling to the ports are taken into account.

Terahertz anisotropic response of additively manufactured one-dimensional photonic crystals

A polymer-based, one-dimensional photonic crystal exhibiting anisotropic responses was demonstrated in the terahertz frequency range. The photonic crystal was composed of alternating compact and low-density polymethacrylate layers. The low-density layers consisted of sub-wavelength sized columns, which were slanted 45° with respect to the substrate surface normal to achieve form-birefringence. Normal incidence polarized terahertz transmission measurements were carried out for characterization of the fabricated photonic crystals in the range from 82 to 125 GHz. The experimental data revealed a 2 GHz shift in the center frequency of the photonic bandgap as a function of in-plane orientation, well demonstrating the anisotropic behavior of the fabricated crystal. The transmission data were analyzed using stratified optical layer model calculations. A good agreement was found between the relevant model parameters and the corresponding design parameters.

A novel electrochemical anodization cell for the synthesis of mesoporous silicon

A novel design of an electrochemical anodization cell dedicated to the synthesis of mesoporous, single-crystalline silicon is presented. First and foremost, the design principle follows user safety since electrochemical etching of silicon requires highly hazardous electrolytes based on hydrofluoric (HF) acid. The novel cell design allows for safe electrolyte handling prior, during, and post-etching. A peristaltic pump with HF-resistant fluoroelastomer tubing transfers electrolytes between dedicated reservoirs and the anodization cell. Due to the flexibility of the cell operation, different processing conditions can be realized providing a large parameter range for the attainable sample thickness, its porosity, and the mean pore size. Rapid etching on the order of several minutes to synthesize micrometer-thick porous silicon epilayers on bulk silicon is possible as well as long-time etching with continuous, controlled electrolyte flow for several days to prepare up to 1000 μm thick self-supporting porous silicon membranes. A highly adaptable, LabVIEW^™-based control software allows for user-defined etching profiles.

[Laparoscopic versus open gastrectomy for advanced gastric cancer : Operative and postoperative results]

BACKGROUND

Minimally invasive gastrectomy is increasingly becoming established worldwide as an alternative to open gastrectomy (OG); however, the majority of available articles in the literature refer to Asian populations and early stages of gastric cancer. This makes an international comparison difficult due to a discrepancy in patient populations and tumor biology as well as Asian and western treatment approaches. Little is known, therefore, whether laparoscopic gastrectomy (LG) can be performed in advanced cancer, in particular with respect to laparoscopic D2 lymphadenectomy, with sufficient radicality and safety in this country.

MATERIAL AND METHODS

All gastrectomies performed for the treatment of advanced gastric cancer with clinical UICC stages 2 and 3 between 2005 and 2017 were analyzed. A case match by age, gender and UICC stage was performed to compare the operative and early postoperative results of LG and OG.

RESULTS

A total of 243 patients with advanced gastric cancer were analyzed. Of these 81 patients (33.3%) underwent LG. The operative time for LG was around 74 min longer (279.2 min vs. 353.4 min, OG vs. LG; p < 0.001), the hospital stay after LG was around 4 days shorter (22.9 days vs. 18.4 days, OG vs. LG; p < 0.001). Significantly more lymph nodes were resected by LG (24.1 lymph nodes vs. 28.8 lymph nodes, OG vs. LG; p < 0.001). In terms of morbidity and mortality there were no differences between the groups.

CONCLUSION

The present study showed that minimally invasive gastrectomy can be performed safely and with comparable histopathological results to open surgery, even in advanced gastric cancer in western populations; however, larger case series and evidence from high-quality studies are urgently needed especially to compare short-term and long-term survival.

Tunable cavity-enhanced terahertz frequency-domain optical Hall effect

Presented here is the development and demonstration of a tunable cavity-enhanced terahertz (THz) frequency-domain optical Hall effect (OHE) technique. The cavity consists of at least one fixed and one tunable Fabry-Pérot resonator. The approach is suitable for the enhancement of the optical signatures produced by the OHE in semi-transparent conductive layer structures with plane parallel interfaces. Tuning one of the cavity parameters, such as the external cavity thickness, permits shifting of the frequencies of the constructive interference and provides substantial enhancement of the optical signatures produced by the OHE. A cavity-tuning optical stage and gas flow cell are used as examples of instruments that exploit tuning an external cavity to enhance polarization changes in a reflected THz beam. Permanent magnets are used to provide the necessary external magnetic field. Conveniently, the highly reflective surface of a permanent magnet can be used to create the tunable external cavity. The signal enhancement allows the extraction of the free charge carrier properties of thin films and can eliminate the need for expensive superconducting magnets. Furthermore, the thickness of the external cavity establishes an additional independent measurement condition, similar to, for example, the magnetic field strength, THz frequency, and angle of incidence. A high electron mobility transistor (HEMT) structure and epitaxial graphene are studied as examples. The tunable cavity-enhancement effect provides a maximum increase of more than one order of magnitude in the change of certain polarization components for both the HEMT structure and epitaxial graphene at particular frequencies and external cavity sizes.

Terahertz-frequency dielectric anisotropy in three-dimensional polymethacrylates fabricated by stereolithography

The anisotropic optical dielectric functions of slanted columnar layers fabricated using polymethacrylate based stereolithography are reported for the terahertz-frequency domain using generalized spectroscopic ellipsometry. The slanted columnar layers are composed of spatially coherent columnar structures with a diameter of 100 µm and a length of 700 µm that are tilted by 45° with respect to the surface normal of the substrates. A simple biaxial (orthorhombic) layer homogenization approach is used to analyze the terahertz ellipsometric data obtained at three different sample azimuthal orientations. The permittivity along the major polarizability directions varies by almost 25%. Our results demonstrate that stereolithography allows tailoring of the polarizability and anisotropy of the host material, and provides a flexible alternative metamaterials fabrication method for the terahertz spectral range.

Prediction of positron emitter distributions for range monitoring in carbon ion therapy: an analytical approach

Range verification is one of the most relevant tasks in ion beam therapy. In the case of carbon ion therapy, positron emission tomography (PET) is the most widely used method for this purpose, which images the [Formula: see text]-activation following nuclear interactions of the ions with the tissue nuclei. Since the positron emitter activity profile is not directly proportional to the dose distribution, until today only its comparison to a prediction of the PET profile allows for treatment verification. Usually, this prediction is obtained from time-consuming Monte Carlo simulations of high computational effort, which impacts the clinical workflow. To solve this issue in proton therapy, a convolution approach was suggested to predict positron emitter activity profiles from depth dose distributions analytically. In this work, we introduce an approach to predict positron emitter distributions from depth dose profiles in carbon ion therapy. While the distal fall-off position of the positron emitter profile is predicted from a convolution approach similar to the one suggested for protons, additional analytical functions are introduced to describe the characteristics of the positron emitter distribution in tissue. The feasibility of this approach is demonstrated with monoenergetic depth dose profiles and spread out Bragg peaks in homogeneous and heterogeneous phantoms. In all cases, the positron emitter profile is predicted with high precision and the distal fall-off position is reproduced with millimeter accuracy.

Comparison of adjustable male slings and artificial urinary sphincter in the treatment of male urinary incontinence: a retrospective analysis of patient selection and postoperative continence status

PURPOSE

To analyze and compare preoperative patient characteristics and postoperative results in men with stress urinary incontinence (SUI) selected for an adjustable male sling system or an artificial urinary sphincter (AUS) in a large, contemporary, multi-institutional patient cohort.

METHODS

658 male patients who underwent implantation between 2010 and 2012 in 13 participating institutions were included in this study (n = 176 adjustable male sling; n = 482 AUS). Preoperative patient characteristics and postoperative outcomes were analyzed. For statistical analysis, the independent T test and Mann-Whitney U test were used.

RESULTS

Patients undergoing adjustable male sling implantation were less likely to have a neurological disease (4.5% vs. 8.9%, p = 0.021), a history of urethral stricture (21.6% vs. 33.8%, p = 0.024) or a radiation therapy (22.7% vs. 29.9%, p = 0.020) compared to patients that underwent AUS implantation. Mean pad usage per day (6.87 vs. 5.82; p < 0.00) and the ratio of patients with a prior incontinence surgery were higher in patients selected for an AUS implantation (36.7% vs. 22.7%; p < 0.001). At maximum follow-up, patients that underwent an AUS implantation had a significantly lower mean pad usage during daytime (p < 0.001) and nighttime (p = 0.018). Furthermore, the patients' perception of their continence status was better with a subjective complete dry rate of 57.3% vs. 22.0% (p < 0.001).

CONCLUSIONS

Patients selected for an AUS implantation showed a more complex prior history and pathogenesis of urinary incontinence as well as a more severe grade of SUI. Postoperative results reflect a better continence status after AUS implantation, favoring the AUS despite the more complicated patient cohort.

High-contrast infrared polymer photonic crystals fabricated by direct laser writing

One-dimensional (1D) photonic crystals (PCs) were fabricated by three-dimensional (3D) direct laser writing using a single polymer to obtain reflectance values approaching that of a gold reference in the near-infrared (near-IR) spectral range. The PCs are composed of alternating compact and low-density polymer layers that provide the necessary periodic variation of the refractive index. The low-density polymer layers are composed of subwavelength-sized pillars which simultaneously serve as a scaffold while also providing refractive index contrast to the adjacent compact polymer layers. The Bruggemann effective medium theory and stratified-layer optical-model calculated reflectivity profiles were employed to optimize the PC's design to operate at a desired wavelength of 1.55 μm. After the fabrication, the PC's structure was compared to the nominal geometry using complementary scanning electron microscopy and optical microscopy micrographs identifying a true-to-form fabrication. The performance of the PCs was investigated experimentally using FTIR reflection and transmission measurements. A good agreement between stratified-layer optical-model calculated and measured data is observed. Therefore, we demonstrate the ease of predictive design and fabrication of highly efficient 1D PCs for the IR spectral range using 3D direct laser writing of a single polymer.

Broadband near-infrared antireflection coatings fabricated by three-dimensional direct laser writing

Three-dimensional direct laser writing via two-photon polymerization is used to fabricate anti-reflective structured surfaces (ARSSs) composed of subwavelength conicoid features optimized to operate over a wide bandwidth in the near-infrared range from 3700  cm^-1 to 6600  cm^-1 (2.7-1.52 μm). Analytic Bruggemann effective medium calculations are used to predict nominal geometric parameters such as the fill factor of the constitutive conicoid features of the anti-reflective structured surfaces (ARSSs) presented here. The performance of the ARSSs was investigated experimentally using infrared reflection and transmission measurements. An enhancement of the transmittance by 1.35%-2.14% over a broadband spectral range from 3700  cm^-1 to 6600  cm^-1 (2.7-1.52 μm) was achieved. We further report on finite-element-based reflection and transmission data using three-dimensional (3D) model geometries for comparison. A good agreement between experimental results and the finite-element-based numerical analysis is observed once as-fabricated deviations from the nominal conicoid forms are included in the model. 3D direct laser writing is demonstrated here as an efficient method for the fabrication and optimization of ARSSs designed for the infrared spectral range.

Si(bzimpy)2 – a hexacoordinate silicon pincer complex for electron transport and electroluminescence

We demonstrate the feasibility of hexacoordinate silicon complexes with dianionic pincer ligands as electron transport and electroluminescent components of organic electronic devices.

In-situ terahertz optical Hall effect measurements of ambient effects on free charge carrier properties of epitaxial graphene

Unraveling the doping-related charge carrier scattering mechanisms in two-dimensional materials such as graphene is vital for limiting parasitic electrical conductivity losses in future electronic applications. While electric field doping is well understood, assessment of mobility and density as a function of chemical doping remained a challenge thus far. In this work, we investigate the effects of cyclically exposing epitaxial graphene to controlled inert gases and ambient humidity conditions, while measuring the Lorentz force-induced birefringence in graphene at Terahertz frequencies in magnetic fields. This technique, previously identified as the optical analogue of the electrical Hall effect, permits here measurement of charge carrier type, density, and mobility in epitaxial graphene on silicon-face silicon carbide. We observe a distinct, nearly linear relationship between mobility and electron charge density, similar to field-effect induced changes measured in electrical Hall bar devices previously. The observed doping process is completely reversible and independent of the type of inert gas exposure.

Anisotropic contrast optical microscope

An optical microscope is described that reveals contrast in the Mueller matrix images of a thin, transparent, or semi-transparent specimen located within an anisotropic object plane (anisotropic filter). The specimen changes the anisotropy of the filter and thereby produces contrast within the Mueller matrix images. Here we use an anisotropic filter composed of a semi-transparent, nanostructured thin film with sub-wavelength thickness placed within the object plane. The sample is illuminated as in common optical microscopy but the light is modulated in its polarization using combinations of linear polarizers and phase plate (compensator) to control and analyze the state of polarization. Direct generalized ellipsometry data analysis approaches permit extraction of fundamental Mueller matrix object plane images dispensing with the need of Fourier expansion methods. Generalized ellipsometry model approaches are used for quantitative image analyses. These images are obtained from sets of multiple images obtained under various polarizer, analyzer, and compensator settings. Up to 16 independent Mueller matrix images can be obtained, while our current setup is limited to 11 images normalized by the unpolarized intensity. We demonstrate the anisotropic contrast optical microscope by measuring lithographically defined micro-patterned anisotropic filters, and we quantify the adsorption of an organic self-assembled monolayer film onto the anisotropic filter. Comparison with an isotropic glass slide demonstrates the image enhancement obtained by our method over microscopy without the use of an anisotropic filter. In our current instrument, we estimate the limit of detection for organic volumetric mass within the object plane of ≈49 fg within ≈7 × 7 μm² object surface area. Compared to a quartz crystal microbalance with dissipation instrumentation, where contemporary limits require a total load of ≈500 pg for detection, the instrumentation demonstrated here improves sensitivity to a total mass required for detection by 4 orders of magnitude. We detail the design and operation principles of the anisotropic contrast optical microscope, and we present further applications to the detection of nanoparticles, to novel approaches for imaging chromatography and to new contrast modalities for observations on living cells.

Optical Hall effect-model description: tutorial

The optical Hall effect is a physical phenomenon that describes the occurrence of magnetic-field-induced dielectric displacement at optical wavelengths, transverse and longitudinal to the incident electric field, and analogous to the static electrical Hall effect. The electrical Hall effect and certain cases of the optical Hall effect observations can be explained by extensions of the classic Drude model for the transport of electrons in metals. The optical Hall effect is most useful for characterization of electrical properties in semiconductors. Among many advantages, while the optical Hall effect dispenses with the need of electrical contacts, electrical material properties such as effective mass and mobility parameters, including their anisotropy as well as carrier type and density, can be determined from the optical Hall effect. Measurement of the optical Hall effect can be performed within the concept of generalized ellipsometry at an oblique angle of incidence. In this paper, we review and discuss physical model equations, which can be used to calculate the optical Hall effect in single- and multiple-layered structures of semiconductor materials. We define the optical Hall effect dielectric function tensor, demonstrate diagonalization approaches, and show requirements for the optical Hall effect tensor from energy conservation. We discuss both continuum and quantum approaches, and we provide a brief description of the generalized ellipsometry concept, the Mueller matrix calculus, and a 4×4 matrix algebra to calculate data accessible by experiment. In a follow-up paper, we will discuss strategies and approaches for experimental data acquisition and analysis.

The exercise-induced myokine irisin does not show an association with depressiveness, anxiety and perceived stress in obese women

Irisin has recently been proposed to act as a myokine secreted from skeletal muscle following exercise and to exert several health-beneficial effects, although its role is far from being established. In contrast to the growing body of literature on the biological regulation and function of irisin, there is no evidence on potential associations with mental functions. Since physical activity has been reported to have favorable impact on mental functions, we investigated the association of irisin with depressiveness, perceived stress, and anxiety as well as eating disorder symptoms in obese women. We included 98 female obese inpatients (age: mean ± S.D. 43.9 ± 12.5 years; body mass index 49.2 ± 8.3 kg/m(2)) covering a broad spectrum of psychopathology. Depressiveness (PHQ-9), perceived stress (PSQ-20), anxiety (GAD-7), and eating disorder symptoms (EDI-2) were assessed psychometrically. Plasma irisin obtained at the same time was determined by ELISA. Irisin did not correlate with depressiveness (r = -0.03, P = 0.80), anxiety (r = 0.14, P = 0.17) and perceived stress (r = -0.14, P = 0.18) as well as eating disorder symptoms in general (r = -0.09, P = 0.39). No correlation of irisin was observed with any subscales of the PSQ-20 and EDI-2 (after Bonferroni correction). In conclusion, irisin is not associated with depressiveness, anxiety and perceived stress in female obese patients. These results do not support the assumption of irisin being involved in psychoendocrine pathways of the regulation of depression or other mental functions such as anxiety and perceived stress.

Solution-stable anisotropic carbon nanotube/graphene hybrids based on slanted columnar thin films for chemical sensing

Because of their structural anisotropy and stability in liquids, carbon nanotube/graphene hybrid structures are promising for biosensing applications, as shown in a proof-of-concept experiment on in situ ellipsometry monitoring of pyrene-functionalized DNA attachment.

Transient Absorption Measurements on Anisotropic Monolayer ReS2

Anisotropic optical and transport properties of monolayer ReS2 fabricated by mechanical exfoliation are reported. Transient absorption measurements with different polarization configurations and sample orientations reveal that the absorption coefficient and transient absorption are both anisotropic, with maximal and minimal values occurring when the light polarization is parallel and perpendicular to the Re atomic chains, respectively. The maximal values are about a factor of 2.5 of the minimal values. By resolving the spatiotemporal dynamics of excitons, it is found that the diffusion coefficient of excitons moving along Re atomic chains is about 16 cm(2) s(-1) at room temperature, which is about a factor of three larger than those moving perpendicular to that direction. An exciton lifetime of 40 ps is also extracted. These findings establish monolayer ReS2 as an anisotropic 2D transition metal dichalcogenide.

Treatment with the ghrelin-O-acyltransferase (GOAT) inhibitor GO-CoA-Tat reduces food intake by reducing meal frequency in rats

The ghrelin acylating enzyme ghrelin-O-acyltransferase (GOAT) was recently identified and implicated in several biological functions. However, the effects on food intake warrant further investigation. While several genetic GOAT mouse models showed normal food intake, acute blockade using a GOAT inhibitor resulted in reduced food intake. The underlying food intake microstructure remains to be established. In the present study we used an automated feeding monitoring system to assess food intake and the food intake microstructure. First, we validated the basal food intake and feeding behavior in rats using the automated monitoring system. Afterwards, we assessed the food intake microstructure following intraperitoneal injection of the GOAT inhibitor, GO-CoA-Tat (32, 96 and 288 μg/kg) in freely fed male Sprague-Dawley rats. Rats showed a rapid habituation to the automated food intake monitoring system and food intake levels were similar compared to manual monitoring (P = 0.43). Rats housed under these conditions showed a physiological behavioral satiety sequence. Injection of the GOAT inhibitor resulted in a dose-dependent reduction of food intake with a maximum effect observed after 96 mg/kg (-27%, P = 0.03) compared to vehicle. This effect was delayed in onset as the first meal was not altered and lasted for a period of 2 h. Analysis of the food intake microstructure showed that the anorexigenic effect was due to a reduction of meal frequency (-15%, P = 0.04), whereas meal size (P = 0.29) was not altered compared to vehicle. In summary, pharmacological blockade of GOAT reduces dark phase food intake by an increase of satiety while satiation is not affected.

Cavity-enhanced optical Hall effect in two-dimensional free charge carrier gases detected at terahertz frequencies

The effect of a tunable, externally coupled Fabry-Perot cavity to resonantly enhance the optical Hall effect signatures at terahertz frequencies produced by a traditional Drude-like two-dimensional electron gas is shown and discussed in this Letter. As a result, the detection of optical Hall effect signatures at conveniently obtainable magnetic fields, for example, by neodymium permanent magnets, is demonstrated. An AlInN/GaN-based high-electron mobility transistor structure grown on a sapphire substrate is used for the experiment. The optical Hall effect signatures and their dispersions, which are governed by the frequency and the reflectance minima and maxima of the externally coupled Fabry-Perot cavity, are presented and discussed. Tuning the externally coupled Fabry-Perot cavity strongly modifies the optical Hall effect signatures, which provides a new degree of freedom for optical Hall effect experiments in addition to frequency, angle of incidence, and magnetic field direction and strength.

Inhalation of macrolides: a novel approach to treatment of pulmonary infections

Systemic antibiotic treatment is established for many pulmonary diseases, e.g., cystic fibrosis (CF), bronchiectasis and chronic obstructive pulmonary disease (COPD) where recurrent bacterial infections cause a progressive decline in lung function. In the last decades inhalative administration of antibiotics was introduced into clinical routine, especially tobramycin, colistin, and aztreonam for treatment of CF and bronchiectasis. Even though they are important in systemic treatment of these diseases due to their antimicrobial spectrum and anti-inflammatory and immunomodulatory properties, macrolides (e.g., azithromycin, clarithromycin, erythromycin, and telithromycin) up to now are not administered by inhalation. The number of in vitro aerosol studies and in vivo inhalation studies is also sparse. We analyzed publications on preparation and administration of macrolide aerosols available in PUBMED focusing on recent publications. Studies with solutions and dry powder aerosols were published. Publications investigating physicochemical properties of aerosols demonstrated that macrolide aerosols may serve for inhalation and will achieve sufficient lung deposition and that the bitter taste can be masked. In vivo studies in rats demonstrated high concentrations and areas under the curve sufficient for antimicrobial treatment in alveolar macrophages and epithelial lining fluid without lung toxicity. The obtained data demonstrate the feasibility of macrolide inhalation which should be further investigated.

Multilayer graphitic coatings for thermal stabilization of metallic nanostructures

We demonstrate that graphitic coatings, which consist of multilayer disordered graphene sheets, can be used for the thermal protection of delicate metal nanostructures. We studied cobalt slanted nanopillars grown by glancing angle deposition that were shown to melt at temperatures much lower than the melting point of bulk cobalt. After graphitic coatings were conformally grown over the surfaces of Co nanopillars by chemical vapor deposition, the resulting carbon-coated Co nanostructures retained their morphology at elevated temperatures, which would damage the uncoated structures. Thermal stabilization is also demonstrated for carbon-coated Ti nanopillars. The results of this study may be extended to other metallic and possibly even nonmetallic nanostructures that need to preserve their morphology at elevated temperatures in a broad range of applications.

Invited article: An integrated mid-infrared, far-infrared, and terahertz optical Hall effect instrument

We report on the development of the first integrated mid-infrared, far-infrared, and terahertz optical Hall effect instrument, covering an ultra wide spectral range from 3 cm(-1) to 7000 cm(-1) (0.1-210 THz or 0.4-870 meV). The instrument comprises four sub-systems, where the magneto-cryostat-transfer sub-system enables the usage of the magneto-cryostat sub-system with the mid-infrared ellipsometer sub-system, and the far-infrared/terahertz ellipsometer sub-system. Both ellipsometer sub-systems can be used as variable angle-of-incidence spectroscopic ellipsometers in reflection or transmission mode, and are equipped with multiple light sources and detectors. The ellipsometer sub-systems are operated in polarizer-sample-rotating-analyzer configuration granting access to the upper left 3 × 3 block of the normalized 4 × 4 Mueller matrix. The closed cycle magneto-cryostat sub-system provides sample temperatures between room temperature and 1.4 K and magnetic fields up to 8 T, enabling the detection of transverse and longitudinal magnetic field-induced birefringence. We discuss theoretical background and practical realization of the integrated mid-infrared, far-infrared, and terahertz optical Hall effect instrument, as well as acquisition of optical Hall effect data and the corresponding model analysis procedures. Exemplarily, epitaxial graphene grown on 6H-SiC, a tellurium doped bulk GaAs sample and an AlGaN/GaN high electron mobility transistor structure are investigated. The selected experimental datasets display the full spectral, magnetic field and temperature range of the instrument and demonstrate data analysis strategies. Effects from free charge carriers in two dimensional confinement and in a volume material, as well as quantum mechanical effects (inter-Landau-level transitions) are observed and discussed exemplarily.

Free-carrier effects and optical phonons in GaNAs/GaAs superlattice heterostructures measured by infrared spectroscopic ellipsometry

The infrared-optical properties of GaAs/GaNxAs1−x superlattice (SL) heterostructures (0 < x < 3.3%) are studied by variable angle-of-incidence infrared spectroscopic ellipsometry (IRSE) for wavenumbers from 250 cm−1 to 700 cm−1. The undoped SL structures where grown on top of a 300 nm thick undoped GaAs buffer layer on Te-doped (001) GaAs substrates by metal-organic vapor phase epitaxy (MOVPE). We observe the well-known Berreman-polariton effect within the GaAs LO-phonon region. We further observe a strong polariton-like resonance near the coupled longitudinal-optical plasmon-phonon frequency of the Te-doped substrate at 306 cm−1. For analysis of the IRSE data we employ the harmonic oscillator dielectric function model and the Drude model for free-carrier response. The additional resonance feature is explained by pseudo surface polariton (PSP) interface modes between the Te-doped GaAs and the undoped GaAs buffer layer / SL film. We find that the PSP modes are extremely sensitive to free-carrier properties within the SL structures, and we obtain a strong increase in free-carrier concentration within the GaNAs SL sublayers with increasing x from analysis of the IRSE data. We further observe the localized vibrational modes of nitrogen at 470 cm−1 in the GaNxAs1−x SL sublayers with a polar strength that increases linearly with x, and which can be used to monitor the nitrogen concentration in GaNxAs1−x.

Activation of TRPM7 channels by small molecules under physiological conditions

Transient receptor potential cation channel, subfamily M, member 7 (TRPM7) is a cation channel covalently linked to a protein kinase domain. TRPM7 is ubiquitously expressed and regulates key cellular processes such as Mg(2+) homeostasis, motility, and proliferation. TRPM7 is involved in anoxic neuronal death, cardiac fibrosis, and tumor growth. The goal of this work was to identify small molecule activators of the TRPM7 channel and investigate their mechanism of action. We used an aequorin bioluminescence-based assay to screen for activators of the TRPM7 channel. Valid candidates were further characterized using patch clamp electrophysiology. We identified 20 drug-like compounds with various structural backbones that can activate the TRPM7 channel. Among them, the δ opioid antagonist naltriben was studied in greater detail. Naltriben's action was selective among the TRP channels tested. Naltriben activates TRPM7 currents without prior depletion of intracellular Mg(2+) even under conditions of low PIP2. Moreover, naltriben interfered with the effect of the TRPM7 inhibitor NS8593. Finally, our experiments with TRPM7 variants carrying mutations in the pore, TRP, and kinase domains indicate that the site of TRPM7 activation by this small-molecule ligand is most likely located in or near the TRP domain. In conclusion, we identified the first organic small-molecule activators of TRPM7 channels, thus providing new experimental tools to study TRPM7 function in native cellular environments.

Short term inhalation toxicity of a liquid aerosol of glutaraldehyde-coated CdS/Cd(OH)2 core shell quantum dots in rats

Quantum dots exhibit extraordinary optical and mechanical properties, and the number of their applications is increasing. In order to investigate a possible effect of coating on the inhalation toxicity of previously tested non-coated CdS/Cd(OH)2 quantum dots and translocation of these very small particles from the lungs, rats were exposed to coated quantum dots or CdCl2 aerosol (since Cd(2+) was present as impurity), 6h/d for 5 consecutive days. Cd content was determined in organs and excreta after the end of exposure and three weeks thereafter. Toxicity was determined by examination of broncho-alveolar lavage fluid and microscopic evaluation of the entire respiratory tract. There was no evidence for translocation of particles from the respiratory tract. Evidence of a minimal inflammatory process was observed by examination of broncho-alveolar lavage fluid. Microscopically, minimal to mild epithelial alteration was seen in the larynx. The effects observed with coated quantum dots, non-coated quantum dots and CdCl2 were comparable, indicating that quantum dots elicited no significant effects beyond the toxicity of the Cd(2+) ion itself. Compared to other compounds with larger particle size tested at similarly low concentrations, quantum dots caused much less pronounced toxicological effects. Therefore, the present data show that small particle sizes with corresponding high surfaces are not the only factor triggering the toxic response or translocation.

Polarization selection rules for inter-Landau-level transitions in epitaxial graphene revealed by the infrared optical Hall effect

We report on the polarization selection rules of inter-Landau-level transitions using reflection-type optical Hall effect measurements from 600 to 4000 cm(-1) on epitaxial graphene grown by thermal decomposition of silicon carbide. We observe symmetric and antisymmetric signatures in our data due to polarization preserving and polarization mixing inter-Landau-level transitions, respectively. From field-dependent measurements, we identify that transitions in coupled graphene monolayers are governed by polarization mixing selection rules, whereas transitions in decoupled graphene monolayers are governed by polarization preserving selection rules. The selection rules may find explanation by different coupling mechanisms of inter-Landau-level transitions with free charge carrier magneto-optic plasma oscillations.

Variations of common riverine contaminants in reservoir sediments

Organic molecules in reservoir sediments can be used as tracers of contaminant inputs into rivers. Vertical variations in the molecular records can be ascribed to pre-depositional alteration within the water column, or in situ post-depositional alteration. We report the molecular stratigraphy of four common riverine contaminant groups in sediment of the largest reservoir on the Danube River, the Iron Gate I Reservoir. Sediments were rapidly deposited, with little variation in texture and, as revealed by analytical pyrolysis, in the concentration and composition of natural sedimentary organic matter. However, a detailed molecular inspection did reveal differences in distribution and organic carbon (OC)-normalized concentrations of contaminants. The OC-normalized concentrations of nonylphenol increased by one order of magnitude with depth down the 70 cm sediment core. There is a strong correlation between sediment depth and the ratio of nonylphenol to its precursor (nonylphenol monoethoxylate). This indicated that nonylphenol was produced in situ. While the relative proportions of C10-C14 linear alkylbenzenes remained constant with increasing depth, they exhibited variations in isomer distribution. These variations, which are due to different degrees of degradation, appear to have occurred within the water column prior to sedimentation of suspended solids. The distribution of 40 polycyclic aromatic hydrocarbons revealed origins from both pyrogenic and petrogenic sources. The differences in their compositions were not depth-related, but rather were associated with variations in the sorption capacities of texturally different sediments. Perylene showed slightly higher concentrations at greater depths, while the OC-normalized concentration of retene systematically increased with sediment depth. This is consistent with formation of retene and perylene via very early diagenetic transformation. The presence of petroleum biomarkers indicated minor contamination by fossil fuels.

Ginger and its pungent constituents non-competitively inhibit activation of human recombinant and native 5-HT3 receptors of enteric neurons

BACKGROUND

Beneficial effects of ginger in the treatment of gastrointestinal (GI) problems and chemotherapy-induced nausea and vomiting are well accepted. In rodents, the action of ginger seems to be mediated by the inhibition of 5-HT3 receptors, which are established targets to combat emesis and irritable bowel syndrome.

METHODS

Heterologously expressed human 5-HT3 A or 5-HT3 AB receptors were characterized by means of Ca(2+) influx studies using HEK293 cells. Complementing Ca(2+) measurements in Fluo-4-AM-stained whole-mount preparations of the human submucous plexus were carried out. Furthermore, [3H]GR65630 binding assays were performed to reveal the mode of action of ginger and its pungent compounds.

KEY RESULTS

We show for the first time that ginger extracts and its pungent arylalkane constituents concentration-dependently inhibit activation of human 5-HT3 receptors. Ginger extracts inhibited both receptors with increasing content of pungent compounds, confirming that these are part of ginger's active principle. Inhibition potencies of the arylalkanes 6-gingerol and 6-shogaol on both receptors were in the low micromolar range. A lipophilic ginger extract and 6-gingerol had no influence on 5-HT potency, but reduced the 5-HT maximum effect, indicating non-competitive inhibition. The non-competitive action was confirmed by [(3) H]GR65630 binding, showing that the ginger extract did not displace the radioligand from 5-HT3 A and 5-HT3 AB receptors. The potential relevance of the inhibitory action of ginger on native 5-HT3 receptors in the gut was confirmed in whole-mount preparations of the human submucous plexus. While a general neurotoxic effect of 6-gingerol was ruled out, it inhibited the 2-methyl-5-HT-mediated activation of 5-HT3 receptors residing on enteric neurons.

CONCLUSIONS & INFERENCES

Our findings may encourage the use of ginger extracts to alleviate nausea in cancer patients receiving chemotherapy and to treat functional GI disorders.

Growth of highly oriented deuterium crystals in silicon nanochannels

The structure of solid deuterium confined in 9 nm wide tubular silicon nanochannels has been studied by means of elastic neutron scattering techniques. As a result we report the formation of fcc D(2) as the stable solid phase in confinement in contrast to the hcp bulk structure. Further, a preferred alignment of D(2) nanocrystals with respect to the surrounding crystalline silicon matrix is discussed in terms of heteroepitaxial growth of solid D(2) on crystalline pore walls.