Chloro-Functionalized Ether-Based Electrolyte for High-Voltage and Stable Potassium-Ion Batteries

Ether-based electrolyte is beneficial to obtaining good low-temperature performance and high ionic conductivity in potassium ion batteries. However, the dilute ether-based electrolytes usually result in ion-solvent co-intercalation of graphite, poor cycling stability, and hard to withstand high voltage cathodes above 4.0 V. To address the aforementioned issues, an electron-withdrawing group (chloro-substitution) was introduced to regulate the solid-electrolyte interphase (SEI) and enhance the oxidative stability of ether-based electrolytes. The dilute (~0.91 M) chloro-functionalized ether-based electrolyte not only facilitates the formation of homogeneous dual halides-based SEI, but also effectively suppress aluminum corrosion at high voltage. Using this functionalized electrolyte, the K||graphite cell exhibits a stability of 700 cycles, the K||Prussian blue (PB) cell (4.3 V) delivers a stability of 500 cycles, and the PB||graphite full-cell reveals a long stability of 6000 cycles with a high average Coulombic efficiency of 99.98 %. Additionally, the PB||graphite full-cell can operate under a wide temperature range from -5 °C to 45 °C. This work highlights the positive impact of electrolyte functionalization on the electrochemical performance, providing a bright future of ether-based electrolytes application for long-lasting, wide-temperature, and high Coulombic efficiency PIBs and beyond.

Deciphering the Formation and Accumulation of Solid-Electrolyte Interphases in Na and K Carbonate-Based Batteries

The continuous solid-electrolyte interphase (SEI) accumulation has been blamed for the rapid capacity loss of carbon anodes in Na and K ethylene carbonate (EC)/diethyl carbonate (DEC) electrolytes, but the understanding of the SEI composition and its formation chemistry remains incomplete. Here, we explain this SEI accumulation as the continuous production of organic species in solution-phase reactions. By comparing the NMR spectra of SEIs and model compounds we synthesized, alkali metal ethyl carbonate (MEC, M = Na or K), long-chain alkali metal ethylene carbonate (LCMEC, M = Na or K), and poly(ethylene oxide) (PEO) oligomers with ethyl carbonate ending groups are identified in Na and K SEIs. These components can be continuously generated in a series of solution-phase nucleophilic reactions triggered by ethoxides. Compared with the Li SEI formation chemistry, the enhancement of the nucleophilicity of an intermediate should be the cause of continuous nucleophilic reactions in the Na and K cases.

Unleashing the Power of Sn2 S3 Quantum Dots: Advancing Ultrafast and Ultrastable Sodium/Potassium-Ion Batteries with N, S Co-Doped Carbon Fiber Network

Tin sulfide (Sn2 S3 ) has been recognized as a potential anode material for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) due to its high theoretical capacities. However, the sluggish ion diffusion kinetics, low conductivity, and severe volume changes during cycling have limited its practical application. In this study, Sn2 S3 quantum dots (QDs) (≈1.6 nm) homogeneously embedded in an N, S co-doped carbon fiber network (Sn2 S3 -CFN) are successfully fabricated by sequential freeze-drying, carbonization, and sulfidation strategies. As anode materials, the Sn2 S3 -CFN delivers high reversible capacities and excellent rate capability (300.0 mAh g-1 at 10 A g-1 and 250.0 mAh g-1 at 20 A g-1 for SIBs; 165.3 mAh g-1 at 5 A g-1 and 100.0 mAh g-1 at 10 A g-1 for PIBs) and superior long-life cycling capability (279.6 mAh g-1 after 10 000 cycles at 5 A g-1 for SIBs; 166.3 mAh g-1 after 5 000 cycles at 2 A g-1 for PIBs). According to experimental analysis and theoretical calculations, the exceptional performance of the Sn2 S3 -CFN composite can be attributed to the synergistic effect of the conductive carbon fiber network and the Sn2 S3 quantum dots, which contribute to the structural stability, reversible electrochemical reactions, and superior electron transportation and ions diffusion.

KI-Assisted Formation of Spindle-like Prussian White Nanoparticles for High-Performance Potassium-Ion Battery Cathodes

Prussian white (PW) is considered as a promising cathode material for potassium-ion batteries (KIBs) due to its low cost and high theoretical capacity. However, the high water content and structural defects and the strict synthesis conditions of PW lead to its unsatisfactory cycling performance and low specific capacity, hindering its practical applications. Herein, a template-engaged reduction method is proposed, using MIL-88B(Fe) as a self-template and KI as the reducing agent to prepare K-rich PW with low defects and water content. Furthermore, the hierarchical porous spindle-like morphology can be inherited from the precursor, furnishing sufficient active sites and reducing the ion diffusion path. Consequently, when applied as a KIB cathode material, spindle-like PW (K1.72Fe[Fe(CN)6]0.96·0.342H2O) manifested remarkable potassium storage properties. Notably, a full cell assembled by the spindle-like PW cathode and graphite anode exhibited a large energy density of ∼216.7 Wh kg-1, demonstrating its huge potential for energy storage systems.

Ultrathin Cobalt-Based Prussian Blue Analogue Nanosheet-Assembled Nanoboxes Interpenetrated with Carbon Nanotubes as a Fast Electron/Potassium-Ion Conductor for Superior Potassium Storage

Rechargeable potassium-ion batteries (PIBs) are regarded as potential substitutes for industrial lithium-ion batteries in large scale energy storage systems due to the world's abundant potassium supplies. Althogh cobalt hexacyanocobaltate (CoHCC) exhibits broad potential as a PIB anode material, its performance is currently unsatisfactory. Herein, novel 5 nm scale ultrathin CoHCC nanosheet-assembled nanoboxes with interspersed carbon nanotubes (CNTs/CoHCC nanoboxes) are fabricated to realize a highly reactive PIB anode. The ultrathin CoHCC layers substantially accelerate electron conduction and provide numerous active sites, while the connected CNTs provide fast axial electron transport. Consequently, the optimized anode exhibits a remarkable discharge capacity of 580.9 mAh g-1 at 0.1 A g-1 and long-term stability with 71.3% retention over 1000 cycles. In situ and ex situ characterizations and density functional theory calculations are further employed to elucidate the K+ storage process and the reason for the enhanced performance of the CNTs/CoHCC nanoboxes.

Construction of Porous Carbon Nanosheet/Cu2S Composites with Enhanced Potassium Storage

Porous C nanosheet/Cu2S composites were prepared using a simple self-template method and vulcanization process. The Cu2S nanoparticles with an average diameter of 140 nm are uniformly distributed on porous carbon nanosheets. When used as the anode of a potassium-ion battery, porous C nanosheet/Cu2S composites exhibit good rate performance and cycle performance (363 mAh g-1 at 0.1 A g-1 after 100 cycles; 120 mAh g-1 at 5 A g-1 after 1000 cycles). The excellent electrochemical performance of porous C nanosheet/Cu2S composites can be ascribed to their unique structure, which can restrain the volume change of Cu2S during the charge/discharge processes, increase the contact area between the electrode and the electrolyte, and improve the electron/ionic conductivity of the electrode material.

Application of New COF Materials in Secondary Battery Anode Materials

Covalent organic framework materials (COFs), as a new type of organic porous material, not only have the characteristics of flexible structure, abundant resources, environmental friendliness, etc., but also have the characteristics of a regular structure and uniform pore channels, so they have broad application prospects in secondary batteries. Their functional group structure, type, and number of active sites play a crucial role in the performance of different kinds of batteries. Therefore, this article starts from these aspects, summarizes the application and research progress of the COF anode materials used in lithium-ion batteries, sodium-ion batteries, and potassium-ion batteries in recent years, discusses the energy storage mechanism of COF materials, and expounds the application prospects of COF electrodes in the field of energy storage.

Regulating cathode surface hydroxyl chemistry enables superior potassium storage

Potassium vanadium fluorophosphate (KVPO4F) is regarded as a promising cathode candidate for potassium-ion batteries due to its high working voltage and satisfactory theoretical capacity. However, the usage of electrochemically inactive binders and redundant current collectors typically results in inferior electrochemical performance and low energy density, thus implying the important role of rational electrode structure design. Herein, we have reported a scalable and cost-effective synthesis of a cellulose-derived KVPO4F self-supporting electrode, which features a special surface hydroxyl chemistry, three-dimensional porous and conductive framework, as well as super flexible and stable architecture. The cellulose not only serves as a flexible substrate, a pore-forming agent, and a versatile binder for KVPO4F/conductive carbon but also enhances the K-ion migration ability. Benefiting from the special hydroxyl chemistry-induced storage mechanism and electrode structural stability, the flexible freestanding KVPO4F cathode exhibits high-rate performance (53.0% capacity retention with current densities increased 50-fold, from 0.2 C to 10 C) and impressive cycling stability (capacity retention up to 74.9% can be achieved over 1,000 cycles at a rate of 5 C). Such electrode design and surface engineering strategies, along with a deeper understanding of potassium storage mechanisms, provide invaluable guidance for better electrode design to boost the performance of potassium-ion energy storage systems.

Stress-Dispersed Superstructure of Sn3 (PO4 )2 @PC Derived from Programmable Assembly of Metal-Organic Framework as Long-Life Potassium/Sodium-Ion Batteries Anodes

The structures of anode materials significantly affect their properties in rechargeable batteries. Material nanosizing and electrode integrity are both beneficial for performance enhancement of batteries, but it is challenging to guarantee optimized nanosizing particles and high structural integrity simultaneously. Herein, a programmable assembly strategy of metal-organic frameworks (MOFs) is used to construct a Sn-based MOF superstructure precursor. After calcination under inert atmosphere, the as-fabricated Sn₃ (PO₄ )₂ @phosphorus doped carbon (Sn₃ (PO₄ )₂ @PC-48) well inherited the morphology of Sn-MOF superstructure precursor. The resultant new material exhibits appreciable reversible capacity and low capacity degradation for K⁺ storage (144.0 mAh g^-1 at 5 A g^-1 with 90.1% capacity retained after 10000 cycles) and Na⁺ storage (202.5 mAh g^-1 at 5 A g^-1 with 96.0% capacity retained after 8000 cycles). Detailed characterizations, density functional theory calculations, and finite element analysis simulations reveal that the optimized electronic structure and the stress-dispersed superstructure morphology of Sn₃ (PO₄ )₂ @PC promote the electronic conductivity, enhance K⁺ / Na⁺ binding ability and improve the structure stabilization efficiently. This strategy to optimize the structure of anode materials by controlling the MOF growth process offer new dimension to regulate the materials precisely in the energy field.

Ultrarapid Nanomanufacturing of High-Quality Bimetallic Anode Library toward Stable Potassium-Ion Storage

Bimetallic alloy nanomaterials are promising anode materials for potassium-ion batteries (KIBs) due to their high electrochemical performance. The most well-adopted fabrication method for bimetallic alloy nanomaterials is tube furnace annealing (TFA) synthesis, which can hardly satisfy the trade-off among granularity, dispersity and grain coarsening due to mutual constraints. Herein, we report a facile, scalable and ultrafast high-temperature radiation (HTR) method for the fabrication of a library of ultrafine bimetallic alloys with narrow size distribution (~10-20 nm), uniform dispersion and high loading. The metal-anchor containing heteroatoms (i.e., O and N), ultrarapid heating/cooling rate (~103 K s-1) and super-short heating duration (several seconds) synergistically contribute to the successful synthesis of small-sized alloy anodes. As a proof-of-concept demonstration, the as-prepared BiSb-HTR anode shows ultrahigh stability indicated by negligible degradation after 800 cycles. The in situ X-ray diffraction reveals the K+ storage mechanism of BiSb-HTR. This study can shed light on the new, rapid and scalable nanomanufacturing of high-quality bimetallic alloys toward extended applications of energy storage, energy conversion and electrocatalysis.

Uniform P2-K0.6CoO2 Microcubes as a High-Energy Cathode Material for Potassium-Ion Batteries

Layered transition-metal (TM) oxides have drawn ever-growing interest as positive electrode materials in potassium-ion batteries (PIBs). Nevertheless, the practical implementation of these positive electrode materials is seriously hampered by their inferior cyclic property and rate performance. Reported here is a self-templating strategy to prepare homogeneous P2-K_0.6CoO₂ (KCO) microcubes. Benefiting from the unusual microcube architecture, the interface between the electrolyte and the active material is considerably diminished. As a result, the KCO microcubes manifest boosted electrochemical properties for potassium storage including large reversible capacity (87.2 mAh g^-1 under 20 mA g^-1), superior rate performance, and ultralong cyclic steady (an improved capacity retention of 86.9% under 40 mA g^-1 after 1000 cycles). More importantly, the fabrication approach can be effectively extended to prepare other layered TM oxide (P3-K_0.5MnO₂, P3-K_0.5Mn_0.8Fe_0.2O₂, P2-K_0.6Co_0.67Mn_0.33O₂, and P2-K_0.6Co_0.66Mn_0.17Ni_0.17O₂) microcubes and nonlayered TM oxide (KFeO₂) microcubes.

Research progress of biomass carbon materials as anode materials for potassium-ion batteries

Biochar materials have attracted people's attention because of their environmental friendliness, abundant resources, and the use of waste resources for reuse. As a potassium-ion anode material, biomass char materials synthesized by different methods have broad application prospects. However, due to the problems of low initial magnification and limited potassium-storage capacity, it is necessary to improve the electrochemical performance through modifications, such as atomic doping. Atomic doping is an effective way to improve battery conductivity and potassium storage. In this paper, the synthesis method of biochar as an anode material for potassium-ion batteries and the influence of atomic doping on its modification in recent years are reviewed.

Rationally Tailoring Superstructured Hexahedron Composed of Defective Graphitic Nanosheets and Macropores: Realizing Durable and Fast Potassium Storage

Multipores engineering composed of micro/mesopores is an effective strategy to improve potassium storage performance via providing enormous adsorption sites and shortened ions diffusion distance. However, a detailed exploration of the role played by macropores in potassium storage is still lacking and has been barely reported until now. Herein, a superstructure carbon hexahedron (DGN-900) is synthesized using poly tannic acid (PTA) as precursor. Due to the spatially confined two-step local contraction of PTA along different directions and dimensions during pyrolysis, defective nanosheets with macropores are formed, while realizing a balance between defects content and graphitization degree by regulating temperature. The presence of macropores is conducive to accelerating electrolyte ions rapid infiltration within electrode, and its pore volume can accommodate electrode structure fluctuation upon cycling, while the most suitable ratio of defects to graphitic provides rich ions adsorption sites and sufficient electrons transfer channels, simultaneously. These advantages enable a prominent electrochemical performance in DGN-900 electrode, including high rate (202.9 mAh g^-1 at 2 A g^-1 ) and long cycling stability over 2000 cycles. This unique fabrication strategy, that is, defects engineering coupled with macropores structure, makes fast and durable potassium storage possible.

WS2 Nanosheet Loaded Silicon-Oxycarbide Electrode for Sodium and Potassium Batteries

Transition metal dichalcogenides (TMDs) such as the WS₂ have been widely studied as potential electrode materials for lithium-ion batteries (LIB) owing to TMDs' layered morphology and reversible conversion reaction with the alkali metals between 0 to 2 V (v/s Li/Li⁺) potentials. However, works involving TMD materials as electrodes for sodium- (NIBs) and potassium-ion batteries (KIBs) are relatively few, mainly due to poor electrode performance arising from significant volume changes and pulverization by the larger size alkali-metal ions. Here, we show that Na⁺ and K⁺ cyclability in WS₂ TMD is improved by introducing WS₂ nanosheets in a chemically and mechanically robust matrix comprising precursor-derived ceramic (PDC) silicon oxycarbide (SiOC) material. The WS₂/SiOC composite in fibermat morphology was achieved via electrospinning followed by thermolysis of a polymer solution consisting of a polysiloxane (precursor to SiOC) dispersed with exfoliated WS₂ nanosheets. The composite electrode was successfully tested in Na-ion and K-ion half-cells as a working electrode, which rendered the first cycle charge capacity of 474.88 mAh g^-1 and 218.91 mAh g^-1, respectively. The synergistic effect of the composite electrode leads to higher capacity and improved coulombic efficiency compared to the neat WS₂ and neat SiOC materials in these cells.

Integrated Design from Microstructural Engineering to Binder Optimization Enabling a Practical Carbon Anode with Ultrahigh ICE and Efficient Potassium Storage

Potassium-ion batteries (PIBs) are emerging as a powerful alternative to lithium-ion battery systems in large-scale energy storage owing to plentiful resources. Nevertheless, pursuing high-yield anode materials with high initial Coulombic efficiency (ICE) and superior rate capability is still one of the most critical challenges in practical application. Herein, an integrated electrode (PC-x) derived from a petroleum coke precursor (carbon residue rate as high as 89%) is regulated from microstructural engineering to binder optimization devoting to high ICE and efficient potassium storage. Excitingly, with a strong assist from a sodium carboxymethyl cellulose (CMC) binder, the PC-900 anode displays an ultrahigh ICE of 80.5%, one of the highest values reported for PIB carbon anodes. Simultaneously, the PC-900 anode submits a high capacity (304.3 mAh g^-1), superb rate (138.2 mAh g^-1 at 10C), and excellent stability. Furthermore, the full cell exhibits an outstanding rate and cycling performance (210.7 mAh g^-1 at 0.5C), confirming its large-scale application prospects. The ultrahigh ICE and excellent performance are mainly attributable to the beneficial microstructures (low surface area, functional group content, and larger interlayer spacing) created by microstructural engineering. Meanwhile, binder optimization also plays a crucial role in reducing the irreversible capacity and interface impedance, further improving the ICE and rate capability. Importantly, mechanism analysis confirms two-stage K⁺ storage behavior: reversible adsorption at edges and defects (>0.25 V) and intercalation into crystalline layers (<0.25 V). This work provides an efficient and easily scalable electrode design strategy for future practical applications of PIBs.

Superconcentrated NaFSA-KFSA Aqueous Electrolytes for 2 V-Class Dual-Ion Batteries

Superconcentrated aqueous electrolytes containing NaN(SO2F)2 and KN(SO2F)2 (for which sodium and potassium bis(fluorosulfonyl)amides (FSA), respectively, are abbreviated) have been developed for 2 V-class aqueous batteries. Based on the eutectic composition of the NaFSA-KFSA (56:44 mol/mol) binary system, the superconcentrated solutions of 35 mol kg-1 Na0.55K0.45FSA/H2O and 33 mol kg-1 Na0.45K0.55FSA/H2O are found to form at 25 °C. As both electrolytes demonstrate a wider potential window of ∼3.5 V compared to that of either saturated 20 mol kg-1 NaFSA or 31 mol kg-1 KFSA solution, we applied the 33 mol kg-1 Na0.45K0.55FSA/H2O to two different battery configurations, carbon-coated Na2Ti2(PO4)3∥K2Mn[Fe(CN)6] and carbon-coated Na3V2(PO4)3∥K2Mn[Fe(CN)6]. The former cell shows highly reversible charge/discharge curves with a mean discharge voltage of 1.4 V. Although the latter cell exhibits capacity degradation, it demonstrates 2 V-class operations. Analysis data of the two cells confirmed that Na+ ions were mainly inserted into the negative electrodes passivated by a Na-rich solid electrolyte interphase, and both Na+ and K+ ions were inserted into the positive electrode. Based upon the observation, we propose new sodium-/potassium-ion batteries using the superconcentrated NaFSA-KFSA aqueous electrolytes.

KOH activated nitrogen and oxygen co-doped tubular carbon clusters as anode material for boosted potassium-ion storage capability

Carbon nanomaterials have become a promising anode material for potassium-ion batteries (KIBs) due to their abundant resources, low cost, and excellent conductivity. However, among carbon materials, the sluggish reaction kinetics and inferior cycle life severely restrict their commercial development as KIBs anodes. It is still a huge challenge to develop carbon materials with various structural advantages and ideal electrochemical properties. Therefore, it is imperative to find a carbon material with heteroatom doping and suitable nanostructure to achieve excellent electrochemical performance. Benefiting from a Na₂SO₄template-assisted method and KOH activation process, the KOH activated nitrogen and oxygen co-doped tubular carbon (KNOCTC) material with a porous structure exhibits an impressive reversible capacity of 343 mAh g^-1at 50 mA g^-1and an improved cyclability of 137 mAh g^-1at 2 A g^-1after 3000 cycles with almost no capacity decay. The kinetic analysis indicates that the storage mechanism in KNOCTC is attributed to the pseudocapacitive process during cycling. Furthermore, the new synthesis route of KNOCTC provides a new opportunity to explore carbon-based potassium storage anode materials with high capacity and cycling performance.

Anion Doping for Layered Oxides with a Solid-Solution Reaction for Potassium-Ion Battery Cathodes

The development of potassium-ion batteries (PIBs) is challenged by the shortage of stable cathode materials capable of reversibly hosting the large-sized K⁺ (1.38 Å), which is prone to cause severe structural degradation and complex phase evolution during the potassiation/depotassiation process. Here, we identified that anionic doping of the layered oxides for PIBs is effective to combat their capacity fading at high voltage (>4.0 V). Taking P2-type K_2/3Mn_7/9Ni_1/9Ti_1/9O_17/9F_1/9 (KMNTOF) as an example, we showed that the partial substitution of O^2- by F^- enlarged the interlayer distance of the K_2/3Mn_7/9Ni_1/9Ti_1/9O₂ (KMNTO), which becomes more favorable for fast K⁺ transition without violent structural destruction. Meanwhile, based on the experimental data and theoretical results, we identified that the introduction of F^- anions effectively increased the redox-active Mn cationic concentration by lowering the average valence of the Mn element, accordingly providing more reversible capacity derived from the Mn^3+/4+ redox couple, rather than oxygen redox. This anionic doping strategy enables the KMNTOF cathode to deliver a high reversible capacity of 132.5 mAh g^-1 with 0.53 K⁺ reversible (de)intercalation in the structure. We expect that the discovery provides new insights into structural engineering for pursuing stable cathodes to facilitate the future applications of high-performance PIBs.

Graphdiyne/Graphene/Graphdiyne Sandwiched Carbonaceous Anode for Potassium-Ion Batteries

Graphdiyne (GDY) has been considered as an appealing anode candidate for K-ion storage since its triangular pore channel, alkyne-rich structure, and large interlayer spacing would endow it with abundant active sites and ideal diffusion paths for K-ions. Nevertheless, the low surface area and disordered structure of bulk GDY typically lead to unsatisfied K storage performance. Herein, we have designed a GDY/graphene/GDY (GDY/Gr/GDY) sandwiched architecture affording a high surface area and fine quality throughout a van der Waals epitaxy strategy. As tested in a half-cell configuration, the GDY/Gr/GDY electrode exhibits better capacity output, rate capability, and cyclic stability as compared to the bare GDY counterpart. In situ electrochemical impedance spectroscopy/Raman spectroscopy/transmission electron microscopy are further applied to probe the K-ion storage feature and disclose the favorable reversibility of GDY/Gr/GDY electrode during repeated potassiation/depotassiation. A full-cell device comprising a GDY/Gr/GDY anode and a potassium Prussian blue cathode enables a high cycling stability, demonstrative of the promising potential of the GDY/Gr/GDY anode for K-ion batteries.

Cobalt-Catalyzed Carbonization Incorporating Disordered Defects in Ordered Graphitic Domains for Fast and Ultrastable Potassium-Ion Battery

Carbonaceous materials featuring both ordered graphitic structure and disordered defects hold great promise for high-performance K-ion batteries (KIBs) due to the concurrent advantages of high electronic conductivity, fast and reversible K⁺ intercalation/deintercalation, and abundant active K⁺ storage sites. However, it has been a lingering problem and remains a big challenge because graphitization and defects are intrinsic trade-off properties of carbonaceous materials. Herein, for the first time, we propose a cobalt-catalyzed carbonization strategy to fabricate porous carbon nanofibers that incorporate disordered defects in graphitic domain layers (PCNFs-DG) for fast and durable K⁺ storage. The Co catalyst not only ensures the formation of highly graphitized carbon shells around the Co particles but also introduces nanopores and doping defects in the following catalyst removal process. This idea of architecting defected-ordered graphitic carbon engineering guarantees fast reaction kinetics as well as structural stability with negligible interlayer expansion/contraction owing to the uncompromised electronic conductivity, expanded interlayer spacing, and regulated K⁺ storage mechanism. These appealing features translate to a high reversible capacity of 318.5 mAh g^-1 at 100 mA g^-1 and ultrahigh stability with almost 100% capacity retention over 2000 cycles in KIBs. This work puts in perspective that defected and ordered carbonaceous materials could be simultaneously achieved, advancing their performance for next-generation energy storage systems.

In Situ Fabrication of Cuprous Selenide Electrode via Selenization of Copper Current Collector for High-Efficiency Potassium-Ion and Sodium-Ion Storage

Selenium-based materials are considered as desirable candidates for potassium-ion and sodium-ion storage. Herein, an in situ fabrication method is developed to prepare an integrated cuprous selenide electrode by means of directly chemical selenization of the copper current collector with commercial selenium powder. Interestingly, only the electrolyte of 1 m potassium hexafluorophosphate dissolved in 1,2-dimethoxyethane with higher highest occupied molecular orbital energy and lower desolvation energy facilitates the formation of polyselenide intermediates and the further selenization of the copper current collector. Benefiting from the unique thin-film-like nanosheet morphology and the robust structural stability of the integrated electrode, the volume change and the loss of selenide species could be effectively restrained. Therefore, high performance is achieved in both potassium-ion batteries (462 mA h g^-1 at 2 A g^-1 for 300 cycles) and sodium-ion batteries (775 mA h g^-1 at 2 A g^-1 for 4000 cycles). The facile fabrication strategy paves a new direction for the design and preparation of high-performance electrodes.

Joint Enhancement in the Electrochemical Reversibility and Cycle Lives for Copper Sulfide for Sodium- and Potassium-Ion Storage via Selenium Substitution

Transition metal sulfides have received considerable interest as the anodes for sodium-ion (SIBs) and potassium-ion batteries (PIBs) owing to their high theoretical capacity and suitable working potential. However, they suffer from poor electrochemical reversibility and limited cycle lives. Herein, we design and synthesize a Se-substituted CuS material, which demonstrates superior electrochemical properties for both potassium and sodium storage because of the enhanced electronic conductivity, lowered diffusion barrier, and shortened diffusion pathway. The anode delivers a specific capacity of 374 mA h g^-1 at a current density of 5 A g^-1 in SIBs and 341 mA h g^-1 at 2 A g^-1 in PIBs and nearly 100% capacity retention over 2000 cycles (SIBs) and 600 cycles (PIBs), respectively. Moreover, a combined measurement including X-ray diffraction, Raman, and transmission electron microscopy reveals an interesting discharge product of Na₂S_0.8Se_0.2, which could accelerate the conversion reaction and enhance the electrochemical reversibility.

Carbon-Free Crystal-like Fe1-xS as an Anode for Potassium-Ion Batteries

Potassium-ion batteries (PIBs) as a new electrochemical energy storage system have been considered as a desirable candidate in the post-lithium-ion battery era. Nevertheless, the study on this realm is in its infancy; it is urgent to develop electrode materials with high electrochemical performance and low cost. Iron sulfides as anode materials have aroused wide attention by virtue of their merits of high theoretical capacities, environmental benignity, and cost competitiveness. Herein, we constructed carbon-free crystal-like Fe_1-xS and demonstrated its feasibility as a PIB anode. The unique structural feature endows the prepared Fe_1-xS with plentiful active sites for electrochemical reactions and short transmission pathways for ions/electrons. The Fe_1-xS electrode retained capacities of 420.8 mAh g^-1 after 100 cycles at 0.1 A g^-1 and 212.9 mAh g^-1 after 250 cycles at 1.0 A g^-1. Even at a high rate of 5.0 A g^-1, an average capacity of 167.6 mAh g^-1 was achieved. In addition, a potassium-ion full cell is assembled by employing Fe_1-xS as an anode and potassium Prussian blue as a cathode; it delivered a discharge capacity of 127.6 mAh g^-1 at 100 mA g^-1 after 50 cycles.

Lithium and Potassium Cations Affect the Performance of Maleamate-Based Organic Anode Materials for Potassium- and Lithium-Ion Batteries

In this study we prepared potassium-ion batteries (KIBs) displaying high output voltage and, in turn, a high energy density, as replacements for lithium-ion batteries (LIBs). Organic electrode materials featuring void spaces and flexible structures can facilitate the mobility of K⁺ to enhance the performance of KIBs. We synthesized potassium maleamate (K-MA) from maleamic acid (MA) and applied as an anode material for KIBs and LIBs, with 1 M potassium bis(fluorosulfonyl)imide (KFSI) and 1 M lithium bis(fluorosulfonyl)imide (LiFSI) in a mixture of ethylene carbonate and ethyl methyl carbonate (1:2, v/v) as respective electrolytes. The K-MA_KFSI anode underwent charging/discharging with carbonyl groups at low voltage, due to the K···O bond interaction weaker than Li···O. The K-MA_KFSI and K-MA_LiFSI anode materials delivered a capacity of 172 and 485 mA h g⁻¹ after 200 cycles at 0.1C rate, respectively. K-MA was capable of accepting one K⁺ in KIB, whereas it could accept two Li⁺ in a LIB. The superior recoveries performance of K-MA_LiFSI, K-MA_KFSI, and Super P_KFSI at rate of 0.1C were 320, 201, and 105 mA h g⁻¹, respectively. This implies the larger size of K⁺ can reversibly cycling at high rate.

Cobalt Coordinated Cyano Covalent-Organic Framework for High-Performance Potassium-Organic Batteries

Potassium ion batteries (PIBs) are expected to become the next large-scale energy storage candidates due to its low cost and abundant resources. And the covalent organic framework (COF), with designable periodic organic structure and ability to organize redox active groups predictably, has been considering as the promising organic electrode candidate for PIB. Herein, we report the facile synthesis of the cyano-COF with Co coordination via a facile microwave digestion reaction and its application in the high-energy potassium ion batteries for the first time. The obtained COF-Co material exhibits the enhanced π-π accumulation and abundant defects originated from the Co interaction with the two-dimensional layered sheet structure of COF, which are beneficial for its energy-storage application. Adopted as the inorganic-metal boosted organic electrode for PIBs, the COF-Co with Co coordination can promote the formation of the π-K⁺ interaction, which could lead to the activation of aromatic rings for potassium-ion storage. Besides, the porous two-dimensional layered structure of COF-Co with abundant defects can also promote the shortened diffusion distance of ion/electron with promoted K⁺ insertion/extraction ability. Enhanced cycling stability with large reversible capacity (371 mAh g^-1 after 400 cycles at 100 mA g^-1) and good rate properties (105 mAh g^-1 at 2000 mA g^-1) have been achieved for the COF-Co electrode.

High-Performance Potassium-Ion Batteries with Robust Stability Based on N/S-Codoped Hollow Carbon Nanocubes

Currently, a big challenge for the practical use of potassium-ion batteries (PIBs) is their intrinsically poor cycling stability, due to the relatively large radius of K⁺ and sluggish kinetics for intercalation/deintercalation. Here we report the scalable fabrication of N/S-codoped hollow carbon nanocubes (NSHCCs), which have the potential as an electrode for advanced PIBs with robust stability. Their discharge and charge specific capacities are ∼560 mA h g^-1 and 310 mA h g^-1 at a current density of 50 mA g^-1, respectively. Meanwhile, they exhibit 100% specific capacity retention after 620 cycles over 9 months at a low current density of 50 mA g^-1, which is state-of-the-art among carbon materials. Moreover, they demonstrate nearly no sacrifice in specific capacities with 99.9% retention after 3000 cycles over 4 months under a high current density of 1000 mA g^-1, superior to most carbon analogues for potassium storage previously reported. The improved electrochemical performance of NSHCC can be mainly attributed to the unique hollow carbon nanocubes with incorporated N and S dopants, which can expand the carbon layer spacing, facilitate K⁺ adsorption, and relieve the volume change during the intercalation/deintercalation of K⁺ ions.

Recent progress in electrochemical performance of carbon-based anodes for potassium-ion batteries based on first principles calculations

Carbonaceous materials and the composite materials of transition metals compounds in carbon matrix were widely used as anode for potassium-ion batteries (PIBs). During the research of these anode materials, first-principles calculations based on adsorption energy, density of states (DOSs) as well as diffusion energy barriers was regarded as an effectively approach to investigate their potassium storage mechanism. The underlying reasons for the improvement of electrochemical performance could be well illustrated via the corresponding calculations. Moreover, first-principles calculations also played a vital role to predict the material properties of electrodes before conducting experimental analysis. Hence, this review is to analyze in-depth the effect mechanism of K-adsorption energy, DOSs as well as diffusion energy barrier and so on for electrochemical performance of carbon-based anode materials. We summarized the corresponding research progress, the challenges of first principles calculations in PIBs, and proposed the corresponding strategies along with future perspectives for further development of carbon-based anode materials. This work not only can provide theoretical guidance for the development of anode materials with excellent physical and chemical properties, but also have reference significance for other energy storage systems.

Storage Mechanism of Alkali Metal Ions in the Hard Carbon Anode: an Electrochemical Viewpoint

The storage mechanisms of Li, Na, and K in hard carbon anodes are investigated through systematically exploring their electrochemical behaviors. Two charge/discharge voltage regions are observed for all the Li, Na, and K storage, a slope at a high voltage, and a plateau in a low-voltage range. Considerably different behaviors are revealed by the galvanostatic intermittent titration technique and electrochemical impedance spectroscopy measurements, and accordingly different storage mechanisms are proposed. The sloping region is mainly attributed to the adsorption at defects/heteroatoms for all the Li, Na, and K storage. In the plateau region, pore filling contributes very little to Li storage but much to Na and K storage. Furthermore, significant effects of ionic sizes on the storage behavior in hard carbons are revealed by the electrochemical performance from Li to Na to K. These findings not only offer a fundamental understanding of storage mechanisms of alkali metal ions in hard carbons but also help develop and design innovative electrode materials for low-cost and large-scale energy storage systems.

Facile Preparation of MoS2 Nanocomposites for Efficient Potassium-Ion Batteries by Grinding-Promoted Intercalation Exfoliation

Efficient exfoliations of bulk molybdenum disulfide (MoS₂ ) into few-layered nanosheets in pure phase are highly attractive because of the promising applications of the resulted 2D materials in diversified optoelectronic devices. Here, a new exfoliation method is presented to prepare semiconductive 2D hexagonal phase (2H phase) MoS₂ -cellulose nanocrystal (CNC) nanocomposites using grinding-promoted intercalation exfoliation (GPIE). This method with facile grinding of the bulk MoS₂ and CNC powder followed by conventional liquid-phase exfoliation in water can not only efficiently exfoliate 2H-MoS₂ nanosheets, but also produce the 2H-MoS₂ /CNC 2D nanocomposites simultaneously. Interestingly, the intercalated CNC sandwiched in MoS₂ nanosheets increases the interlayer spacing of 2H-MoS₂ , providing perfect conditions to accommodate the large-sized ions. Therefore, these nanocomposites are good anode materials of potassium-ion batteries (KIBs), showing a high reversible capacity of 203 mAh g^-1 at 200 mA g^-1 after 300 cycles, a good reversible capacity of 114 mAh g^-1 at 500 mA g^-1 , and a low decay of 0.02% per cycle over 1500 cycles. With these impressive KIB performances, this efficient GPIE method will open up a new avenue to prepare pure-phase MoS₂ and promising 2D nanocomposites for high-performance device applications.

Tremella-like Mo and N Codoped Graphitic Nanosheets by In Situ Carbonization of Phthalocyanine for Potassium-Ion Battery

A tremella-like Mo and N codoped graphitic nanosheet array supported on activated carbon (Mo₂C-MoC/AC-N) is prepared via in situ carbonization of nitrogen-rich cobalt phthalocyanine nanoparticulates anchored on activated carbon as a high-performance anode for potassium-ion batteries. The nanosheets about 5 nm thick are uniformly distributed on the surface of activated carbon for fast K-ion intercalation, and the abundant micropores in activated carbon provide additional adsorption sites of potassium ions, forming a three-dimensional architecture for potassium storage. The 3.9 atom % Mo in Mo₂C-MoC/AC-N is in the form of Mo₂C and MoC flakes (around 1:1) attached to the graphitic nanosheets. X-ray diffraction (XRD) analysis revealed that the reaction with Mo₂C (forming K₂C) happens mainly at 0.8-0.4 V, while the reaction with MoC (forming K₂C) occurs primarily at 0.4-0.01 V. The N doping (9.6 atom %) causes an interlayer spacing expansion of 0.3 Å in the graphitic nanosheets, beneficial to the potassium-ion insertion reaction to form KC₈ at 0.4-0.01 V. The Mo₂C-MoC/AC-N anode exhibits a capacity of 457.5 mA h g^-1 at a current density of 0.05 A g^-1 and an excellent capacity of 144.4 mA h g^-1 at a high current of 5 A g^-1 with a capacity loss rate of 0.49‰ per cycle.

Facile Synthesis of P-Doped Carbon Nanosheets as Janus Electrodes of Advanced Potassium-Ion Hybrid Capacitor

Potassium-ion hybrid capacitors (PIHCs) shrewdly integrate the merits of the high energy density of battery-type anode and the high power density of capacitor-type cathode, promising prospects for potential application in a diversity of fields. Here, we report the synthesis of P-doped porous carbon nanosheets (P-PCNs) with favorable features as electrochemical storage materials, including ultrahigh specific surface area and rich activity sites. The P-PCN as Janus electrodes show highly attractive electrochemical properties of high capacity and remarkable stability for fast K⁺ storage and manifest high capacitance for PF₆^- adsorption. The P-PCNs are applied as both anode and cathode materials to set up dual-carbon PIHCs, which show the capability to deliver a high energy/power density (165.2 Wh kg^-1 and 5934.4 W kg^-1) as well as remarkable long-life capability.

Expanded MoSe2 Nanosheets Vertically Bonded on Reduced Graphene Oxide for Sodium and Potassium-Ion Storage

The cost-efficient and plentiful Na and K resources motivate the research on ideal electrodes for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). Here, MoSe₂ nanosheets perpendicularly anchored on reduced graphene oxide (rGO) are studied as an electrode for SIBs and PIBs. Not only does the graphene network serves as a nucleation substrate for suppressing the agglomeration of MoSe₂ nanosheets to eliminate the electrode fracture but also facilitates the electrochemical kinetics process and provides a buffer zone to tolerate the large strain. An expanded interplanar spacing of 7.9 Å is conducive to fast alkaline ion diffusion, and the formed chemical bondings (C-Mo and C-O-Mo) promote the structure integrity and the charge transfer kinetics. Consequently, MoSe₂@5%rGO exhibits a reversible specific capacity of 458.3 mAh·g^-1 at 100 mA·g^-1, great cyclability with a retention of 383.6 mAh·g^-1 over 50 cycles, and excellent rate capability (251.3 mAh·g^-1 at 5 A·g^-1) for SIBs. For PIBs, a high first specific capacity of 365.5 mAh·g^-1 at 100 mA·g^-1 with a low capacity fading of 51.5 mAh·g^-1 upon 50 cycles and satisfactory rate property are acquired for MoSe₂@10%rGO composite. Ex situ measurements validate that the discharge products are Na₂Se for SIBs and K₅Se₃ for PIBs, and robust chemical bonds boost the structure stability for Na- and K-ion storage. The full batteries are successfully fabricated to verify the practical feasibility of MoSe₂@5%rGO composite.

Electrolyte-Mediated Stabilization of High-Capacity Micro-Sized Antimony Anodes for Potassium-Ion Batteries

Alloying anodes exhibit very high capacity when used in potassium-ion batteries, but their severe capacity fading hinders their practical applications. The failure mechanism has traditionally been attributed to the large volumetric change and/or their fragile solid electrolyte interphase. Herein, it is reported that an antimony (Sb) alloying anode, even in bulk form, can be stabilized readily by electrolyte engineering. The Sb anode delivers an extremely high capacity of 628 and 305 mAh g^-1 at current densities of 100 and 3000 mA g^-1 , respectively, and remains stable for more than 200 cycles. Interestingly, there is no need to do nanostructural engineering and/or carbon modification to achieve this excellent performance. It is shown that the change in K⁺ solvation structure, which is tuned by electrolyte composition (i.e., anion, solvent, and concentration), is the main reason for achieving this excellent performance. Moreover, an interfacial model based on the K⁺ -solvent-anion complex behavior is presented. The electronegativity of the K⁺ -solvent-anion complex, which can be tuned by changing the solvent type and anion species, is used to predict and control electrode stability. The results shed new light on the failure mechanism of alloying anodes, and provide a new guideline for electrolyte design that stabilizes metal-ion batteries using alloying anodes.

First-Principles Study on the Cation-Dependent Electrochemical Stabilities in Li/Na/K Hydrate-Melt Electrolytes

Aqueous alkali-ion batteries, particularly earth-abundant sodium- or potassium-based systems, are potentially safe and low-cost alternatives to nonaqueous Li-ion batteries. Recently, concentrated aqueous electrolytes with Na and K salts as well as Li ones have been extensively studied to increase the voltage of aqueous batteries; however, the potential windows become narrower in the order of Li > Na > K. Here, we study the difference in the potential windows of Li-, Na-, and K-salt concentrated aqueous electrolytes (hydrate melts) by first-principles molecular dynamics. As the Lewis acidity of alkali cations decreases (Li⁺ > Na⁺ > K⁺), the sacrificial reduction of counter anions is less active and water molecules are more aggregated. This situation is unfavorable for achieving stable anion-derived passivation on negative electrodes as well as for being stabilized to oxidation on positive electrodes. Hence, the Lewis acidity of alkali cations is essential to dominate the potential windows of hydrate-melt electrolytes.

Potassium Nickel Iron Hexacyanoferrate as Ultra-Long-Life Cathode Material for Potassium-Ion Batteries with High Energy Density

The abundant reserve and low price of potassium resources promote K-ion batteries (KIBs) becoming a promising alternative to Li-ion batteries, while the large ionic radius of K-ions creates a formidable challenge for developing suitable electrodes. Here Ni-substituted Prussian blue analogues (PBAs) are investigated comprehensively as cathodes for KIBs. The synthesized K_1.90Ni_0.5Fe_0.5[Fe(CN)₆]_0.89·0.42H₂O (KNFHCF-1/2) takes advantage of the merits of high capacity from electrochemically active Fe-ions, outstanding electrochemical kinetics induced by decreased band gap and K-ion diffusion activation energy, and admirable structure stability from inert Ni-ions. Therefore, a high first capacity of 81.6 mAh·g^-1 at 10 mA·g^-1, an excellent rate property (53.4 mAh·g^-1 at 500 mA·g^-1), and a long-term lifespan over 1000 cycles with the lowest fading rate of 0.0177% per cycle at 100 mA·g^-1 can be achieved for KNFHCF-1/2. The K-ion intercalation/deintercalation proceeds through a facile solid solution mechanism, allowing 1.5-electron transfer based on low- and high-spins Fe^II/Fe^III couples, which is verified by ex situ XRD, XPS, and DFT calculations. The K-ion full battery is also demonstrated using a graphite anode with a high energy density of 282.7 Wh·kg^-1. This work may promote more studies on PBA electrodes and accelerate the development of KIBs.

Enhancing the Cycling Stability by Tuning the Chemical Bonding between Phosphorus and Carbon Nanotubes for Potassium-Ion Battery Anodes

Phosphorus/carbon (P/C) composites as promising potassium-ion storage materials have been extensively investigated for its compound superiorities of high specific capacity and favorable electronic conductivity. However, the effects of different chemical bonding states between P and the carbon matrix for potassium-ion storage and cycling performance still need to be investigated. Herein, three P/C composites with different chemical bonding states were successfully fabricated through simply ball-milling red P with carboxylic group carbon nanotubes (CGCNTs), carbon nanotubes (CNTs), and reduced carboxylic group carbon nanotubes (RCGCNTs), respectively. When used as potassium-ion battery (PIB) anodes, the red P and CGCNT (P-CGCNT) composite deliver the most outstanding cycling stability (402.6 mAh g^-1 over 110 cycles) with a favorable capacity retention of 68.26% at a current density of 0.1 A g^-1, much higher than that of the phosphorus-CNT (P-CNT) composite (297.5 mAh g^-1 and 50.40%). Based on the results of X-ray photoelectron spectroscopy and electrochemical performance, we propose that the existence of a carboxyl functional group will be instrumental for the formation of the P-O-C bond. More importantly, when compared with the P-C bond, the P-O-C bond can lead to a higher reversible capacity and a better long-term cycling stability as a result of the more robust bonding energy of the P-O-C bond (585 KJ mol^-1) than that of the P-C bond (264 kJ mol^-1). This work provides some insights into designing high-performance P anodes for PIBs.

Development of KPF6/KFSA Binary-Salt Solutions for Long-Life and High-Voltage K-Ion Batteries

A series of binary-salt electrolytes of KPF₆/KN(SO₂F)₂ (KFSA) in carbonate ester solvents have been developed for high-voltage K-ion batteries by clarifying the effect of salt ratio and different solvents on the physical properties of the electrolyte solutions and electrochemical performance of K-ion batteries. The KPF₆/KFSA carbonate ester solutions, such as KPF₆/KFSA ethylene carbonate (EC)/diethyl carbonate (DEC), exhibit higher ionic conductivity than single-salt KPF₆ one, and higher KFSA content results in higher ionic conductivity. The KPF₆-rich binary-salt electrolytes with KPF₆/KFSA ratios of ≥3 (mol/mol) provide enough oxidation stability and passivation against Al corrosion at 4.6 V over 100 h, ensuring reversible operation of a 4 V class positive electrode, K₂Mn[Fe(CN)₆] in half-cell. Graphite negative electrodes exhibit higher Coulombic efficiency and better rate performance in 0.75 mol kg^-1 K(PF₆)_0.9(FSA)_0.1/EC/DEC and 1 mol kg^-1 K(PF₆)_0.75(FSA)_0.25/EC/DEC electrolytes than those in the KPF₆ one. Surface analysis by hard X-ray photoelectron spectroscopy reveals that the decomposition product of N(SO₂F)₂^- anion contributes to stabilizing solid electrolyte interphase on a graphite electrode. From comparing different solvents of EC/DEC, EC/ethyl methyl carbonate, and EC/propylene carbonate (PC), the K₂Mn[Fe(CN)₆] electrode demonstrates the highest Coulombic efficiency in the EC/PC binary electrolyte, while graphite electrodes exhibit no significant difference. Based on the half-cell tests, we successfully achieve the 3.6 V class full cell of graphite|K(PF₆)_0.75(FSA)_0.25/EC/PC|K₂Mn[Fe(CN)₆] showing excellent cyclability over 500 cycles, which is far superior to that of the conventional KPF₆/EC/DEC electrolyte cell.

Porous-Carbon Aerogels with Tailored Sub-Nanopores for High Cycling Stability and Rate Capability Potassium-Ion Battery Anodes

Developing advanced electrode materials for potassium-ion batteries (PIBs) is an emerging research area in recent years; so far, several strategies such as heteroatom doping into carbon, increasing interlayer spacing, or creating amorphous region in graphite have been investigated. Here, we studied the effect of sub-nanopores in a porous-carbon aerogel with a pore size distribution centered at around 0.8 nm and achieved outstanding PIB performance including long cycling stability (particularly at small current densities for prolonged charge/discharge period) and high rate capability with enhanced retentions. Mechanism studies reveal very high contribution from surface capacitive potassium (K)-ion storage (more than 90%) to the total capacity, and theoretical calculations show that 0.8 nm sub-nanopores lead to substantially low barrier for K-ion transport and storage, with ultrasmall diffusion energy and negligible lattice change. Sub-nanopore engineering, as demonstrated here, may be adopted to develop highly efficient and stable porous-carbon-based structures for applications in advanced energy storage systems and electrochemical catalysis.

Boosting the Potassium-Ion Storage Performance in Soft Carbon Anodes by the Synergistic Effect of Optimized Molten Salt Medium and N/S Dual-Doping

Soft carbon is attracting tremendous attention as a promising anode material for potassium-ion batteries (PIBs) because of its graphitizable structure and adjustable interlayer distance. Herein, nitrogen/sulfur dual-doped porous soft carbon nanosheets (NSC) have been prepared with coal tar pitch as carbon precursors in an appropriate molten salt medium. The molten salt medium and N/S dual-doping are responsible for the formation of nanosheet-like morphology, abundant microporous channels with a high surface area of 436 m² g^-1, expanded interlamellar spacing of 0.378 nm, and enormous defect-induced active sites. These structural features are crucial for boosting potassium-ion storage performance, endowing the NSC to deliver a high potassiation storage capacity of 359 mAh g^-1 at 100 mA g^-1 and 115 mAh g^-1 at 5.0 A g^-1, and retaining 92.4% capacity retention at 1.0 A g^-1 after 1000 cycles. More importantly, the pre-intercalation of K atom from the molten salts helps improve the initial Coulombic efficiency to 50%, which outperforms those of the recently reported carbon anode materials with large surface areas. The density functional theory calculations further illuminate that the N/S dual-doping can facilitate the adsorption of K-ion in carbon materials and decrease the ion diffusion energy barrier during the solid-state charge migration.

Hierarchical Co3O4@N-Doped Carbon Composite as an Advanced Anode Material for Ultrastable Potassium Storage

Cobalt oxide (Co₃O₄) delivers a poor capacity when applied in large-sized alkali metal-ion systems such as potassium-ion batteries (KIBs). Our density functional theory calculation suggests that this is due to poor conductivity, high diffusion barrier, and weak potassium interaction. N-doped carbon can effectively attract potassium ions, improve conductivity, and reduce diffusion barriers. Through interface engineering, the properties of Co₃O₄ can be tuned via composite design. Herein, a Co₃O₄@N-doped carbon composite was designed as an advanced anode for KIBs. Due to the interfacial design of the composite, K⁺ were effectively transported through the Co₃O₄@N-C composite via multiple ionic pathways. The structural design of the composite facilitated increased Co₃O₄ spacing, a nitrogen-doped carbon layer reduced K-ion diffusion barrier, and improved conductivity and protected the electrode from damage. Based on the entire composite, a superior capacity of 448.7 mAh/g was delivered at 50 mA/g after 40 cycles, and moreover, 213 mAh/g was retained after 740 cycles when cycled at 500 mA/g. This performance exceeds that of most metal-oxide-based KIB anodes reported in literature.

In situ healing of dendrites in a potassium metal battery

The use of potassium (K) metal anodes could result in high-performance K-ion batteries that offer a sustainable and low-cost alternative to lithium (Li)-ion technology. However, formation of dendrites on such K-metal surfaces is inevitable, which prevents their utilization. Here, we report that K dendrites can be healed in situ in a K-metal battery. The healing is triggered by current-controlled, self-heating at the electrolyte/dendrite interface, which causes migration of surface atoms away from the dendrite tips, thereby smoothening the dendritic surface. We discover that this process is strikingly more efficient for K as compared to Li metal. We show that the reason for this is the far greater mobility of surface atoms in K relative to Li metal, which enables dendrite healing to take place at an order-of-magnitude lower current density. We demonstrate that the K-metal anode can be coupled with a potassium cobalt oxide cathode to achieve dendrite healing in a practical full-cell device.

K0.83V2O5: A New Layered Compound as a Stable Cathode Material for Potassium-Ion Batteries

Recently, potassium-ion batteries (PIBs) are being actively investigated. The development of PIBs calls for cathode materials with a rigid framework, reversible electrochemical reactivity, and a high amount of extractable K ions, which is extremely challenging due to the large size of potassium. Herein, a new layered compound K_0.83V₂O₅ is reported as a potential cathode material for PIBs. It delivers an initial depotassiation capacity of 86 mAh g^-1 and exhibits a reversible capacity of 90 mAh g^-1 with a high redox potential of 3.5 V (vs K⁺/K) and a capacity retention of more than 80% after 200 cycles. Experimental investigations combined with theoretical calculation indicate that depotassiation-potassiation is accommodated by contraction-expansion of the interlayer spacing along with unpuckering-puckering of the layers. Additionally, the calculated electronic structure suggests the (semi)metallic feature of K_xV₂O₅ (0 < x ≤ 0.875) and K-ion transport in the material is predicted to be one-dimensional with the experimentally estimated chemical diffusion coefficient in the order of 10^-15-10^-12 cm² s^-1. Finally, a K-ion full cell consisting of the K_0.83V₂O₅ cathode and a graphite anode is demonstrated to deliver an energy density of 136 Wh kg^-1. This study will provide insights for further designing novel layered cathodes with high K-ion content for PIBs.

Bismuth-Antimony Alloy Nanoparticle@Porous Carbon Nanosheet Composite Anode for High-Performance Potassium-Ion Batteries

Antimony (Sb)-based anode materials have recently aroused great attention in potassium-ion batteries (KIBs), because of their high theoretical capacities and suitable potassium inserting potentials. Nevertheless, because of large volumetric expansion and severe pulverization during potassiation/depotassiation, the performance of Sb-based anode materials is poor in KIBs. Herein, a composite nanosheet with bismuth-antimony alloy nanoparticles embedded in a porous carbon matrix (BiSb@C) is fabricated by a facile freeze-drying and pyrolysis method. The introduction of carbon and bismuth effectively suppress the stress/strain originated from the volume change during charge/discharge process. Excellent electrochemical performance is achieved as a KIB anode, which delivers a high reversible capacity of 320 mA h g^-1 after 600 cycles at 500 mA g^-1. In addition, full KIBs by coupling with Prussian Blue cathode deliver a high capacity of 396 mA h g^-1 and maintain 360 mA h g^-1 after 70 cycles. Importantly, the operando X-ray diffraction investigation reveals a reversible potassiation/depotassiation reaction mechanism of (Bi,Sb) ↔ K(Bi,Sb) ↔ K₃(Bi,Sb) for the BiSb@C composite. Our findings not only propose a reasonable design of high-performance alloy-based anodes in KIBs but also promote the practical use of KIBs in large-scale energy storage.

A Flexible Potassium-Ion Hybrid Capacitor with Superior Rate Performance and Long Cycling Life

Potassium-ion batteries are promising candidates for large-scale energy storage applications owing to their merits of abundant resources, low cost, and high working voltage. However, the unsatisfying rate performance and cycling stability caused by sluggish K⁺ diffusion kinetics and dramatic volume expansion hinder the development of potassium-ion batteries. In this study, we design a flexible potassium-ion hybrid capacitor (PIHC) by combining the K-Sn alloying mechanism on the Sn anode and the fast capacitive behavior on the AC cathode with high surface area and mesoporous structure. After optimization, the fabricated Sn||AC PIHC achieves both a high energy density of 120 W h kg^-1 and high power density of 2850 W kg^-1, much better than other similar hybrid devices. Moreover, a gel polymer electrolyte with a 3D porous structure and high ionic conductivity was employed to improve the structural stability of the Sn anode, which not only realizes good flexibility but also achieves long cycling stability with a capacity retention of nearly 100% for 2000 cycles at a high current density of 3.0 A g^-1.

Dual-Functional Template-Directed Synthesis of MoSe2/Carbon Hybrid Nanotubes with Highly Disordered Layer Structures as Efficient Alkali-Ion Storage Anodes beyond Lithium

Sodium/Potassium-ion batteries (SIBs/PIBs) have recently received tremendous attention because of their particular features of cost-effectiveness and promising energy density, which hold great potential for large-scale applications. Nevertheless, it still has a common bottleneck issue that is the sluggish kinetics of Na⁺/K⁺ intercalation, which raises more rigorous requirement on the electrode candidates regarding the morphology, dimension, and architecture. Herein, we have constructed unique MoSe₂-based hybrid nanotubes with wall structures composed of highly disordered MoSe₂ layers embedded in phosphorus and nitrogen co-doped carbon matrix (denoted MoSe₂⊂PNC-HNTs), by a facile two-step strategy using Se nanorods as the dual-functional template, i.e., shape-directed agent and in situ selenization resources. Benefitting from the combined features of the one-dimensional (1D) hollow interior, hybrid wall structure with high disorder, and the phosphorus and nitrogen co-doping-induced abundant defect sites in the carbon matrix, the MoSe₂⊂PNC-HNT anode exhibits high specific capacities of 280 and 262 mA h g^-1 over 200 cycles at the current density of 0.1 A g^-1 for Na⁺ and K⁺ storage, respectively, and achieves remarkable capacity retention rates of 87.0% at 2 A g^-1 over 3500 cycles for Na-ion storage and 80.1% at 1 A g^-1 after 500 cycles for K-ion storage.

In Situ Formation of Hierarchical Bismuth Nanodots/Graphene Nanoarchitectures for Ultrahigh-Rate and Durable Potassium-Ion Storage

Metallic bismuth (Bi) has been widely explored as remarkable anode material in alkali-ion batteries due to its high gravimetric/volumetric capacity. However, the huge volume expansion up to ≈406% from Bi to full potassiation phase K₃ Bi, inducing the slow kinetics and poor cycling stability, hinders its implementation in potassium-ion batteries (PIBs). Here, facile strategy is developed to synthesize hierarchical bismuth nanodots/graphene (BiND/G) composites with ultrahigh-rate and durable potassium ion storage derived from an in situ spontaneous reduction of sodium bismuthate/graphene composites. The in situ formed ultrafine BiND (≈3 nm) confined in graphene layers can not only effectively accommodate the volume change during the alloying/dealloying process but can also provide high-speed channels for ionic transport to the highly active BiND. The BiND/G electrode provides a superior rate capability of 200 mA h g^-1 at 10 A g^-1 and an impressive reversible capacity of 213 mA h g^-1 at 5 A g^-1 after 500 cycles with almost no capacity decay. An operando synchrotron radiation-based X-ray diffraction reveals distinctively sharp multiphase transitions, suggesting its underlying operation mechanisms and superiority in potassium ion storage application.

Correlation between Microstructure and Potassium Storage Behavior in Reduced Graphene Oxide Materials

Potassium-ion batteries (PIBs) are considered to be potential alternatives to the conventional lithium-ion batteries (LIBs) due to the similar working mechanism and abundant potassium (K) resource. However, it still remains challenging to directly apply commercial graphite anodes for PIBs owing to the large K ions, which may impede the electrochemical intercalation of K ions into the graphite interlayer and result in a poor cyclic stability and rate capability. Reduced graphene oxide (rGO) has shown remarkable electrochemical performance as an anode material for PIBs due to the fact that rGO possesses more active sites with an enlarged interlayer distance. Understanding the microstructure of rGO is crucial for optimizing its K-ion storage capabilities. Herein, it is revealed that the K-ion storage behavior of rGO is strongly dependent on the thermal treatment temperature on account of the difference in microstructure. rGO graphitized at 2500 °C exhibits a superior long-term cyclic stability for 2500 cycles due to the expanded interlayer distance and the unique graphite-like structure in a long range, enabling it to endure the huge volume change during uninterrupted K-ion intercalation/deintercalation processes.

Rational Design of a Polyimide Cathode for a Stable and High-Rate Potassium-Ion Battery

Potassium has similar chemical characteristics compared with lithium while it is more abundant and of low cost, resulting in widespread research attention on potassium-ion batteries (PIBs). Developing organic polymer cathodes has garnered extensive attention because of their merits of environmental friendship and structure diversity, while confronted with inferior cycle stability and low rate performance. In this paper, we utilize the low-cost graphite nanosheets to stabilize polyimide (PI@G) for PIBs. Additionally, the potassium storage mechanism of PI@G was further evaluated; the highly reversible chemical bonds (C═O) of PI@G are responsible to its long-term stability. Consequently, the PI@G exhibits a maximal capacity of 142 mA h g^-1 at the current density of 100 mA g^-1 and maintains a capacity of 118 mA h g^-1 after 500 cycles (corresponding to a capacity fade of 0.034% per cycle). Moreover, the full battery based on the PI@G cathode also reveals promisingly electrochemical performance. This study may have great significance to the application prospect of the organic cathode for PIBs.

Two-Dimensional T-NiSe2 as a Promising Anode Material for Potassium-Ion Batteries with Low Average Voltage, High Ionic Conductivity, and Superior Carrier Mobility

Potassium-ion batteries (KIBs) have attracted great attention due to their unique advantages including abundant resources, low redox potential of K, and feasible usage of cheap aluminum current collector in battery assembly. In the present work, through first-principles calculations, we find that the recently synthesized two-dimensional T-NiSe₂ is a promising anode material of KIBs. It possesses a large capacity (247 mAh/g), small diffusion barrier (0.05 eV), and low average voltage (0.49 V), rendering T-NiSe₂ a high-performance KIB anode candidate. In addition, we analyze the carrier mobility of T-NiSe₂, and the results demonstrate that it possesses a superior carrier mobility of 1685 cm²/(V s), showing the potential for applications in nanoelectronic devices.

Birnessite Nanosheet Arrays with High K Content as a High-Capacity and Ultrastable Cathode for K-Ion Batteries

Potassium-ion batteries (PIBs) are one of the emerging energy-storage technologies due to the low cost of potassium and theoretically high energy density. However, the development of PIBs is hindered by the poor K⁺ transport kinetics and the structural instability of the cathode materials during K⁺ intercalation/deintercalation. In this work, birnessite nanosheet arrays with high K content (K_0.77 MnO₂ ⋅0.23H₂ O) are prepared by "hydrothermal potassiation" as a potential cathode for PIBs, demonstrating ultrahigh reversible specific capacity of about 134 mAh g^-1 at a current density of 100 mA g^-1 , as well as great rate capability (77 mAh g^-1 at 1000 mA g^-1 ) and superior cycling stability (80.5% capacity retention after 1000 cycles at 1000 mA g^-1 ). With the introduction of adequate K⁺ ions in the interlayer, the K-birnessite exhibits highly stabilized layered structure with highly reversible structure variation upon K⁺ intercalation/deintercalation. The practical feasibility of the K-birnessite cathode in PIBs is further demonstrated by constructing full cells with a hard-soft composite carbon anode. This study highlights effective K⁺ -intercalation for birnessite to achieve superior K-storage performance for PIBs, making it a general strategy for developing high-performance cathodes in rechargeable batteries beyond lithium-ion batteries.