Dirac cones and minigaps for graphene on Ir(111)

Moiré Energy Dissipation Driven by Nonlinear Dynamics

The moiré superlattice in twisted van der Waals heterostructures is of central importance for the modulation of the electronic and optical properties of the system, yet the mechanical dissipation of such moiré systems remains largely unexplored. Here, we report the experimental observations of energy dissipation across both vertical and lateral directions along the moiré superstructures, revealing a significant increase in dissipation at moiré ridges compared to flat domains. Comparison of the measurements with a theoretical phononic dissipation model suggests that the local increase in energy dissipation originates from nonlinear instability dynamics of the moiré superstructure. Criteria for such moiré energy dissipation are established, which are expected to be broadly applicable to other van der Waals heterostructures. Our results extend the understanding of mechanical energy loss in moiré systems and support the rational design of slidtronic and twisttronic devices and nanoelectromechanical systems in general.

Rashba-like Spin Textures in Graphene Promoted by Ferromagnet-Mediated Electronic Hybridization with a Heavy Metal

Epitaxial graphene/ferromagnetic metal (Gr/FM) heterostructures deposited onto heavy metals have been proposed for the realization of spintronic devices because of their perpendicular magnetic anisotropy and sizable Dzyaloshinskii-Moriya interaction (DMI), allowing for both enhanced thermal stability and stabilization of chiral spin textures. However, establishing routes toward this goal requires the fundamental understanding of the microscopic origin of their unusual properties. Here, we elucidate the nature of the induced spin-orbit coupling (SOC) at Gr/Co interfaces on Ir. Through spin- and angle-resolved photoemission spectroscopy along with density functional theory, we show that the interaction of the heavy metals with the Gr layer via hybridization with the FM is the source of strong SOC in the Gr layer. Furthermore, our studies on ultrathin Co films underneath Gr reveal an energy splitting of ∼100 meV for in-plane and negligible for out-of-plane spin polarized Gr π-bands, consistent with a Rashba-SOC at the Gr/Co interface, which is either the fingerprint or the origin of the DMI. This mechanism vanishes at large Co thicknesses, where neither in-plane nor out-of-plane spin-orbit splitting is observed, indicating that Gr π-states are electronically decoupled from the heavy metal. The present findings are important for future applications of Gr-based heterostructures in spintronic devices.

Conduction Band Replicas in a 2D Moiré Semiconductor Heterobilayer

Stacking monolayer semiconductors creates moiré patterns, leading to correlated and topological electronic phenomena, but measurements of the electronic structure underpinning these phenomena are scarce. Here, we investigate the properties of the conduction band in moiré heterobilayers of WS2/WSe2 using submicrometer angle-resolved photoemission spectroscopy with electrostatic gating. We find that at all twist angles the conduction band edge is the K-point valley of the WS2, with a band gap of 1.58 ± 0.03 eV. From the resolved conduction band dispersion, we deduce an effective mass of 0.15 ± 0.02 me. Additionally, we observe replicas of the conduction band displaced by reciprocal lattice vectors of the moiré superlattice. We argue that the replicas result from the moiré potential modifying the conduction band states rather than final-state diffraction. Interestingly, the replicas display an intensity pattern with reduced 3-fold symmetry, which we show implicates the pseudo vector potential associated with in-plane strain in moiré band formation.

Unveiling the nature of atomic defects in graphene on a metal surface

Low-energy argon ion bombardment of graphene on Ir(111) induces atomic-scale defects at the surface. Using a scanning tunneling microscope, the two smallest defects appear as a depression without discernible interior structure suggesting the presence of vacancy sites in the graphene lattice. With an atomic force microscope, however, only one kind can be identified as a vacancy defect with four missing carbon atoms, while the other kind reveals an intact graphene sheet. Spatially resolved spectroscopy of the differential conductance and the measurement of total-force variations as a function of the lateral and vertical probe-defect distance corroborate the different character of the defects. The tendency of the vacancy defect to form a chemical bond with the microscope probe is reflected by the strongest attraction at the vacancy center as well as by hysteresis effects in force traces recorded for tip approach to and retraction from the Pauli repulsion range of vertical distances.

Revealing large room-temperature Nernst coefficients in 2D materials by first-principles modeling

Two-dimensional (2D) materials have attracted significant attention owing to their distinctive electronic, thermal, and mechanical characteristics. Recent advancements in both theoretical understanding and experimental methods have greatly contributed to the understanding of thermoelectric properties in 2D materials. However, thermomagnetic properties of 2D materials have not yet received the same amount of attention. In this work, we select promising 2D materials guided by the physics of the Nernst effect and present a thorough first-principles study of their electronic structures, carrier mobilities, and Nernst coefficients as a function of carrier concentration. Specifically, we reveal that trilayer graphene with an ABA stacking exhibits an exceptionally large Nernst coefficient of 112 μV (KT)-1 at room temperature. We further demonstrate that monolayer graphene, ABC-stacked trilayer graphene, and trilayer phosphorene (AAA stacking) have large Nernst coefficients at room temperature. This study establishes an ab initio framework for the quantitative study of the thermomagnetic effects in 2D materials and demonstrates high fidelity with previous experimental data.

High-throughput screening of the transport behavior of tetragonal perovskites

Halide perovskites have attracted attention due to their low cost and excellent optoelectronic properties. Although their optical properties gained widespread consensus, there was still divergence in understanding carrier transport behavior. In this study, the mobility of tetragonal perovskites was investigated by empirical models, including longitudinal acoustic phonon (LAP) and polar optical phonon (POP) models. The results revealed that the mobility predicted from the LAP model was much higher than that from the POP model. A longitudinal optical phonon (LOP) was considered as the decisive scattering source for charge carriers in perovskites. Furthermore, the mobility was extremely sensitive to z-axis strain, and 8 types of perovskites with high carrier mobility were screened. Using the experimental lattice constants, the predicted mobility of CsSnI3 was μe,z = 1428 and μh,z = 2310 cm2 V-1 s-1, respectively. The tetragonal CsSnI3 has high mobility and moderate bandgaps, suggesting potential applications in high-efficiency solar cells.

Unidirectional Nano-modulated Binding and Electron Scattering in Epitaxial Borophene

A complex interplay between the crystal structure and the electron behavior within borophene renders this material an intriguing 2D system, with many of its electronic properties still undiscovered. Experimental insight into those properties is additionally hampered by the limited capabilities of the established synthesis methods, which, in turn, inhibits the realization of potential borophene applications. In this multimethod study, photoemission spectroscopies and scanning probe techniques complemented by theoretical calculations have been used to investigate the electronic characteristics of a high-coverage, single-layer borophene on the Ir(111) substrate. Our results show that the binding of borophene to Ir(111) exhibits pronounced one-dimensional modulation and transforms borophene into a nanograting. The scattering of photoelectrons from this structural grating gives rise to the replication of the electronic bands. In addition, the binding modulation is reflected in the chemical reactivity of borophene and gives rise to its inhomogeneous aging effect. Such aging is easily reset by dissolving boron atoms in iridium at high temperature, followed by their reassembly into a fresh atomically thin borophene mesh. Besides proving electron-grating capabilities of the boron monolayer, our data provide comprehensive insight into the electronic properties of epitaxial borophene which is vital for further examination of other boron systems of reduced dimensionality.

Laser-Induced Graphitization of Polydopamine on Titania Nanotubes

Since the discovery of laser-induced graphite/graphene, there has been a notable surge of scientific interest in advancing diverse methodologies for their synthesis and applications. This study focuses on the utilization of a pulsed Nd:YAG laser to achieve graphitization of polydopamine (PDA) deposited on the surface of titania nanotubes. The partial graphitization is corroborated through Raman and XPS spectroscopies and supported by water contact angle, nanomechanical, and electrochemical measurements. Reactive molecular dynamics simulations confirm the possibility of graphitization in the nanosecond time scale with the evolution of NH3, H2O, and CO2 gases. A thorough exploration of the lasing parameter space (wavelength, pulse energy, and number of pulses) was conducted with the aim of improving either electrochemical activity or photocurrent generation. Whereas the 532 nm laser pulses interacted mostly with the PDA coating, the 365 nm pulses were absorbed by both PDA and the substrate nanotubes, leading to a higher graphitization degree. The majority of the photocurrent and quantum efficiency enhancement is observed in the visible light between 400 and 550 nm. The proposed composite is applied as a photoelectrochemical (PEC) sensor of serotonin in nanomolar concentrations. Because of the suppressed recombination and facilitated charge transfer caused by the laser graphitization, the proposed composite exhibits significantly enhanced PEC performance. In the sensing application, it showed superior sensitivity and a limit of detection competitive with nonprecious metal materials.

Aperiodic Modulation of Graphene Driven by Oxygen-Induced Reconstruction of Rh(110)

Artificial nanostructuring of graphene has served as a platform to induce variations in its structural and electronic properties, fostering the experimental observation of a wide and fascinating phenomenology. Here, we present an approach to graphene tuning, based on Rh(110) surface reconstruction induced by oxygen atoms intercalation. The resulting nanostructured graphene has been characterized by scanning tunneling microscopy (STM) complemented by low-energy electron microscopy (LEEM), micro low-energy electron diffraction (μ-LEED), micro angle-resolved photoemission spectroscopy (μ-ARPES), and micro X-ray photoelectron spectroscopy (μ-XPS) measurements under ultrahigh vacuum (UHV) conditions at room temperature (RT). It is found that by fine-tuning the O2 exposure amount, a mixture of missing row surface reconstructions of the metal surface below the graphene layer can be induced. This atomic rearrangement under the graphene layer results in aperiodic patterning of the two-dimensional (2D) material. The electronic structure of the resulting nanostructured graphene is dominated by a linear dispersion of the Dirac quasiparticles, characteristic of its free-standing state but with a p-doping character. The local effects of the underlying missing rows on the interfacial chemistry and on the quasiparticle scattering processes in graphene are studied using atomically resolved STM images. The possibilities offered by this nanostructuring approach, which consists in inducing surface reconstructions under graphene, could provide a novel tuning strategy for this 2D material.

Recent Advances in Moiré Superlattice Systems by Angle-Resolved Photoemission Spectroscopy

The last decade has witnessed a flourish in 2D materials including graphene and transition metal dichalcogenides (TMDs) as atomic-scale Legos. Artificial moiré superlattices via stacking 2D materials with a twist angle and/or a lattice mismatch have recently become a fertile playground exhibiting a plethora of emergent properties beyond their building blocks. These rich quantum phenomena stem from their nontrivial electronic structures that are effectively tuned by the moiré periodicity. Modern angle-resolved photoemission spectroscopy (ARPES) can directly visualize electronic structures with decent momentum, energy, and spatial resolution, thus can provide enlightening insights into fundamental physics in moiré superlattice systems and guides for designing novel devices. In this review, first, a brief introduction is given on advanced ARPES techniques and basic ideas of band structures in a moiré superlattice system. Then ARPES research results of various moiré superlattice systems are highlighted, including graphene on substrates with small lattice mismatches, twisted graphene/TMD moiré systems, and high-order moiré superlattice systems. Finally, it discusses important questions that remain open, challenges in current experimental investigations, and presents an outlook on this field of research.

Observation of a Folded Dirac Cone in Heavily Doped Graphene

Superlattice potentials imposed on graphene can alter its Dirac states, enabling the realization of various quantum phases. We report the experimental observation of a replica Dirac cone at the Brillouin zone center induced by a superlattice in heavily doped graphene with Gd intercalation using angle-resolved photoemission spectroscopy (ARPES). The replica Dirac cone arises from the (√3× √3)R30° superlattice formed by the intervalley coupling of two nonequivalent valleys (e.g., the Kekulé-like distortion phase), accompanied by a bandgap opening. According to the findings, the replica Dirac band in Gd-intercalated graphene disappears beyond a critical temperature of 30 K and can be suppressed by potassium adsorption. The modulation of the replica Dirac band is primarily attributable to the residual frozen gas, which can act as a source of intervalley scattering at temperatures below 30 K. Our results highlight the persistence of the hidden Kekulé-like phase within the heavily doped graphene, enriching our current understanding of its replica Dirac Fermions.

Superstructures, Commensurations, and Rotation of Single-Layer TaS2 on Au(111) Induced by Cs Intercalation/Deintercalation

We use in situ synchrotron grazing incidence X-ray diffraction and X-ray reflectivity to investigate with high resolution the structure of a two-dimensional single layer of tantalum sulfide grown on a Au(111) surface and its evolution during intercalation by Cs atoms and deintercalation, which decouples and recouples the two materials, respectively. The grown single layer consists of a mixture of TaS₂ and its S-depleted version, TaS, both aligned with gold, and forming moirés where 7 (respectively 13) lattice constants of the 2D layer almost perfectly match 8 (respectively 15) substrate lattice constants. Intercalation fully decouples the system by lifting the single layer by ∼370 pm and induces an increase of its lattice parameter by 1-2 picometers. The system gradually evolves, during cycles of intercalation/deintercalation assisted by an H₂S atmosphere, toward a final coupled state consisting of the fully stoichiometric TaS₂ dichalcogenide whose moiré is found very close to the 7/8 commensurability. The reactive H₂S atmosphere appears necessary to achieve full deintercalation, presumably by preventing S depletion and the concomitant strong bonding with the intercalant. The structural quality of the layer improves during the cyclic treatment. In parallel, because they are decoupled from the substrate by the intercalation of cesium, some of the TaS₂ flakes rotate by 30°. These produce two additional superlattices with characteristic diffraction patterns of different origins. The first is aligned with gold's high symmetry crystallographic directions and is a commensurate moiré ((6 × 6)-Au(111) coinciding with (3√3 × 3√3)R30°-TaS₂). The second is incommensurate and corresponds to a near coincidence of (6 × 6) unit cells of 30°-rotated TaS₂ with (4√3 × 4√3)Au(111) surface ones. This structure, which is less coupled to gold, might be related to the ∼(3× 3) charge density wave previously reported even at room temperature in TaS₂ grown on noninteracting substrates. A (3 × 3) superstructure of 30°-rotated TaS₂ islands is indeed revealed by complementary scanning tunneling microscopy.

Moiré Superlattice Structure in Two-Dimensional Catalysts: Synthesis, Property and Activity

Two-dimensional (2D) layered materials have been widely used as catalysts due to their high specific surface area, large fraction of uncoordinated surface atoms, and high charge carrier mobility. Moiré superlattice emerges in 2D layered materials with twist angle or lattice mismatch. By manipulating the moiré superlattice structure, 2D layered materials present modulated electronic band structure, topological edge states, and unconventional superconductivity which are tightly associated with the performance of catalysts. Hence, engineering moiré superlattice structures are proposed to be an important technology in modifying 2D layered materials for improved catalytic properties. However, currently, the investigation of moiré superlattice structure in a catalytic application is still in its infancy. This perspective starts with the discussion of structural features and fabrication strategy of 2D materials with moiré superlattice structure. Afterward, the catalytic applications, including electrocatalytic and photocatalytic applications, are summarized. In particular, the promotion mechanism of the catalytic performance caused by the moiré superlattice structure is proposed. Finally, the perspective is concluded by outlining the remaining challenges and possible solutions for the future development of 2D materials with moiré superlattice structure towards the catalytic applications.

A primer on twistronics: a massless Dirac fermion's journey to moiré patterns and flat bands in twisted bilayer graphene

The recent discovery of superconductivity in magic-angle twisted bilayer graphene (TBLG) has sparked a renewed interest in the strongly-correlated physics ofsp²carbons, in stark contrast to preliminary investigations which were dominated by the one-body physics of the massless Dirac fermions. We thus provide a self-contained, theoretical perspective of the journey of graphene from its single-particle physics-dominated regime to the strongly-correlated physics of the flat bands. Beginning from the origin of the Dirac points in condensed matter systems, we discuss the effect of the superlattice on the Fermi velocity and Van Hove singularities in graphene and how it leads naturally to investigations of the moiré pattern in van der Waals heterostructures exemplified by graphene-hexagonal boron-nitride and TBLG. Subsequently, we illuminate the origin of flat bands in TBLG at the magic angles by elaborating on a broad range of prominent theoretical works in a pedagogical way while linking them to available experimental support, where appropriate. We conclude by providing a list of topics in the study of the electronic properties of TBLG not covered by this review but may readily be approached with the help of this primer.

Observation of electronic structure replicas in photoemission spectra of graphite upon adsorption of tin phthalocyanine

Cone-type bands near the center of the surface Brillouin zone were observed in low-energy angle-resolved photoemission spectra of tin phthalocyanine adsorbed on graphite. Simulations in comparison with the experimental data show that the spectral features represent replicas of the electronic structure of graphite nearK‾resulting from high-order momentum transfer processes up to the fourth order owing to the interaction of substrate electrons with the long-range structural order of the adsorbate overlayer. The analysis of time-resolved photoemission data from one of the replicas yields a quantitative and very good agreement with previous studies on the excited carrier dynamics in the Dirac cones of graphite and graphene.

Observation of gapped Dirac cones in a two-dimensional Su-Schrieffer-Heeger lattice

The Su-Schrieffer-Heeger (SSH) model in a two-dimensional rectangular lattice features gapless or gapped Dirac cones with topological edge states along specific peripheries. While such a simple model has been recently realized in photonic/acoustic lattices and electric circuits, its material realization in condensed matter systems is still lacking. Here, we study the atomic and electronic structure of a rectangular Si lattice on Ag(001) by angle-resolved photoemission spectroscopy and theoretical calculations. We demonstrate that the Si lattice hosts gapped Dirac cones at the Brillouin zone corners. Our tight-binding analysis reveals that the Dirac bands can be described by a 2D SSH model with anisotropic polarizations. The gap of the Dirac cone is driven by alternative hopping amplitudes in one direction and staggered potential energies in the other one and hosts topological edge states. Our results establish an ideal platform to explore the rich physical properties of the 2D SSH model.

Switchable molecular functionalization of an STM tip: from a Yu-Shiba-Rusinov Tip to a Kondo tip

In this work we fabricate and characterize a functionalized superconducting (SC) Nb tip of a scanning tunnelling microscope (STM). The tip is functionalized with a Tetracyanoquinodimethane molecule (TCNQ) that accepts charge from the tip and develops a magnetic moment. As a consequence, in scanning tunnelling spectroscopy (STS), sharp, bias symmetric sub-gap states identified as Yu-Shiba-Rusinov (YSR) bound states appear against the featureless density of states of a metallic graphene on Ir(111) sample. Although the coupling regime of the magnetic impurity with the SC tip depends on the initial absorption configuration of the molecule, the interaction strength between the SC tip and the charged TCNQ molecule can be reversibly controlled by tuning the tip-sample distance. The controlled transition from one coupling regime to the other allows us to verify the relation between the energy scales of the two competing many-body effects for the functionalized tip. Quenching the SC state of the Nb tip with a magnetic field switches abruptly from a tip dominated by the YSR bound states to a Kondo tip.

Optically-Induced Symmetry Switching in a Reconfigurable Kagome Photonic Lattice: From Flatband to Type-III Dirac Cones

We demonstrate the transition of band structure from flatband to type-III Dirac cones in an electromagnetically induced Kagome photonic lattice generated in a three-level Λ-type 85Rb atomic configuration both experimentally and theoretically. Such instantaneously reconfigurable Kagome photonic lattice with flatband is "written" by a strong coupling field possessing a Kagome intensity distribution, which can modulate the refractive index of atomic vapors in a spatially periodical manner under electromagnetically induced transparency. By introducing an additional one-dimensional periodic coupling field to cover any one set of the three inequivalent sublattices of the induced Kagome photonic lattice, the dispersion-less energy band can evolve into type-III Dirac cones with linear dispersion by easily manipulating the intensity of the one-dimensional field. Our results may pave a new route to engineer in situ reconfigurable photonic structures with type-III Dirac cones, which can act as promising platforms to explore the underlying physics and beam dynamics.

Two-Way Twisting of a Confined Monolayer: Orientational Ordering within the van der Waals Gap between Graphene and Its Crystalline Substrate

Two-dimensional confinement of lattices produces a variety of order and disorder phenomena. When the confining walls have atomic granularity, unique structural phases are expected, of relevance in nanotribology, porous materials, or intercalation compounds where, e.g., electronic states can emerge accordingly. The interlayer's own order is frustrated by the competing interactions exerted by the two confining surfaces. We revisit the concept of orientational ordering, introduced by Novaco and McTague to describe the twist of incommensurate monolayers on crystalline surfaces. We predict a two-way twist of the monolayer as its density increases. We discover such a behavior in alkali atom monolayers (sodium, cesium) confined between graphene and an iridium surface, using scanning tunneling microscopy and electron diffraction.

On the problem of Dirac cones in fullerenes on gold

Artificial graphene based on molecular networks enables the creation of novel 2D materials with unique electronic and topological properties. Landau quantization has been demonstrated by CO molecules arranged on the two-dimensional electron gas on Cu(111) and the observation of electron quantization may succeed based on the created gauge fields. Recently, it was reported that instead of individual manipulation of CO molecules, simple deposition of nonpolar C₆₀ molecules on Cu(111) and Au(111) produces artificial graphene as evidenced by Dirac cones in photoemission spectroscopy. Here, we show that C₆₀-induced Dirac cones on Au(111) have a different origin. We argue that those are related to umklapp diffraction of surface electronic bands of Au on the molecular grid of C₆₀ in the final state of photoemission. We test this alternative explanation by precisely probing the dimensionality of the observed conical features in the photoemission spectra, by varying both the incident photon energy and the degree of charge doping via alkali adatoms. Using density functional theory calculations and spin-resolved photoemission we reveal the origin of the replicating Au(111) bands and resolve them as deep leaky surface resonances derived from the bulk Au sp-band residing at the boundary of its surface projection. We also discuss the manifold nature of these resonances which gives rise to an onion-like Fermi surface of Au(111).

Selecting the Reaction Path in On-Surface Synthesis through the Electron Chemical Potential in Graphene

The organometallic on-surface synthesis of the eight-membered sp² carbon-based ring cyclooctatetraene (C₈H₈, Cot) with the neighboring rare-earth elements ytterbium and thulium yields fundamentally different products for the two lanthanides, when conducted on graphene (Gr) close to the charge neutrality point. Sandwich-molecular YbCot wires of more than 500 Å length being composed of an alternating sequence of Yb atoms and upright-standing Cot molecules result from the on-surface synthesis with Yb. In contrast, repulsively interacting TmCot dots consisting of a single Cot molecule and a single Tm atom result from the on-surface synthesis with Tm. While the YbCot wires are bound through van der Waals interactions to the substrate, the dots are chemisorbed to Gr via the Tm atoms being more electropositive compared to Yb atoms. When the electron chemical potential in Gr is substantially raised (n-doping) through backside doping from an intercalation layer, the reaction product in the synthesis with Tm can be tuned to TmCot sandwich-molecular wires rather than TmCot dots. By use of density functional theory, it is found that the reduced electronegativity of Gr upon n-doping weakens the binding as well as the charge transfer between the reaction intermediate TmCot dot and Gr. Thus, the assembly of the TmCot dots to long TmCot sandwich-molecular wires becomes energetically favorable. It is thereby demonstrated that the electron chemical potential in Gr can be used as a control parameter in an organometallic on-surface synthesis to tune the outcome of a reaction.

Self-Assembly of a Triphenylene-Based Electron Donor Molecule on Graphene: Structural and Electronic Properties

In this study, we report on the self-assembly of the organic electron donor 2,3,6,7,10,11-hexamethoxytriphenylene (HAT) on graphene grown epitaxially on Ir(111). Using scanning tunneling microscopy and low-energy electron diffraction, we find that a monolayer of HAT assembles in a commensurate close-packed hexagonal network on graphene/Ir(111). X-ray and ultraviolet photoelectron spectroscopy measurements indicate that no charge transfer between the HAT molecules and the graphene/Ir(111) substrate takes place, while the work function decreases slightly. This demonstrates that the HAT/graphene interface is weakly interacting. The fact that the molecules nonetheless form a commensurate network deviates from what is established for adsorption of organic molecules on metallic substrates where commensurate overlayers are mainly observed for strongly interacting systems.

Topography inversion in scanning tunneling microscopy of single-atom-thick materials from penetrating substrate states

Scanning tunneling microscopy (STM) is one of the indispensable tools to characterize surface structures, but the distinction between atomic geometry and electronic effects based on the measured tunneling current is not always straightforward. In particular, for single-atomic-thick materials (graphene or boron nitride) on metallic substrates, counterintuitive phenomena such as a larger tunneling current for insulators than for metal and a topography opposite to the atomic geometry are reported. Using first-principles density functional theory calculations combined with analytical modeling, we reveal the critical role of penetrating states of metallic substrates that surpass 2D material states, hindering the measurement of intrinsic 2D materials states and leading to topography inversion. Our finding should be instrumental in the interpretation of STM topographies of atomic-thick materials and in the development of 2D material for (opto)electronic and various quantum applications.

Strong interlayer interactions in bilayer and trilayer moiré superlattices

Moiré superlattices constructed from transition metal dichalcogenides have demonstrated a series of emergent phenomena, including moiré excitons, flat bands, and correlated insulating states. All of these phenomena depend crucially on the presence of strong moiré potentials, yet the properties of these moiré potentials, and the mechanisms by which they can be generated, remain largely open questions. Here, we use angle-resolved photoemission spectroscopy with submicron spatial resolution to investigate an aligned WS₂/WSe₂ moiré superlattice and graphene/WS₂/WSe₂ trilayer heterostructure. Our experiments reveal that the hybridization between moiré bands in WS₂/WSe₂ exhibits an unusually large momentum dependence, with the splitting between moiré bands at the Γ point more than an order of magnitude larger than that at K point. In addition, we discover that the same WS₂/WSe₂ superlattice can imprint an unexpectedly large moiré potential on a third, separate layer of graphene (g/WS₂/WSe₂), suggesting new avenues for engineering two-dimensional moiré superlattices.

LiCl Photodissociation on Graphene: A Photochemical Approach to Lithium Intercalation

The interest in the research of the structural and electronic properties between graphene and lithium has bloomed since it has been proven that the use of graphene as an anode material in lithium-ion batteries ameliorates their performance and stability. Here, we investigate an alternative route to intercalate lithium underneath epitaxially grown graphene on iridium by means of photon irradiation. We grow thin films of LiCl on top of graphene on Ir(111) and irradiate the system with soft X-ray photons, which leads to a cascade of physicochemical reactions. Upon LiCl photodissociation, we find fast chlorine desorption and a complex sequence of lithium intercalation processes. First, it intercalates, forming a disordered structure between graphene and iridium. On increasing the irradiation time, an ordered Li(1 × 1) surface structure forms, which evolves upon extensive photon irradiation. For sufficiently long exposure times, lithium diffusion within the metal substrate is observed. Thermal annealing allows for efficient lithium desorption and full recovery of the pristine G/Ir(111) system. We follow in detail the photochemical processes using a multitechnique approach, which allows us to correlate the structural, chemical, and electronic properties for every step of the intercalation process of lithium underneath graphene.

Computational Modeling of 2D Materials under High Pressure and Their Chemical Bonding: Silicene as Possible Field-Effect Transistor

To study the possibility for silicene to be employed as a field-effect transistor (FET) pressure sensor, we explore the chemistry of monolayer and multilayered silicene focusing on the change in hybridization under pressure. Ab initio computations show that the effect of pressure depends greatly on the thickness of the silicene film, but also reveals the influence of real experimental conditions, where the pressure is not hydrostatic. For this purpose, we introduce anisotropic strain states. With pure uniaxial stress applied to silicene layers, a path for sp³ silicon to sp³d silicon is found, unlike with pure hydrostatic pressure. Even with mixed-mode stress (in-plane pressure half of the out-of-plane one), we find no such path. In addition to introducing our theoretical approach to study 2D materials, we show how the hybridization change of silicene under pressure makes it a good FET pressure sensor.

Selecting 'convenient observers' to probe the atomic structure of CVD graphene on Ir(111) via photoelectron diffraction

CVD graphene grown on metallic substrates presents, in several cases, a long-range periodic structure due to a lattice mismatch between the graphene and the substrate. For instance, graphene grown on Ir(111), displays a corrugated supercell with distinct adsorption sites due to a variation of its local electronic structure. This type of surface reconstruction represents a challenging problem for a detailed atomic surface structure determination for experimental and theoretical techniques. In this work, we revisited the surface structure determination of graphene on Ir(111) by using the unique advantage of surface and chemical selectivity of synchrotron-based photoelectron diffraction. We take advantage of the Ir 4f photoemission surface state and use its diffraction signal as a probe to investigate the atomic arrangement of the graphene topping layer. We determine the average height and the overall corrugation of the graphene layer, which are respectively equal to 3.40 ± 0.11 Å and 0.45 ± 0.03 Å. Furthermore, we explore the graphene topography in the vicinity of its high-symmetry adsorption sites and show that the experimental data can be described by three reduced systems simplifying the moiré supercell multiple scattering analysis.

Moiré-Potential-Induced Band Structure Engineering in Graphene and Silicene

A moiré pattern results from the projection of one periodic pattern to another with relative lattice constant or misalignment and provides great periodic potential to modify the electronic properties of pristine materials. In this Review, recent research on the effect of the moiré superlattice on the electronic structures of graphene and silicene, both of which possess a honeycomb lattice, is focused on. The moiré periodic potential is introduced by the interlayer interaction to realize abundant phenomena, including new generation of Dirac cones, emergence of Van Hove singularities (vHs) at the cross point of two sets of Dirac cones, Mott-like insulating behavior at half-filling state, unconventional superconductivity, and electronic Kagome lattice and flat band with nontrivial edge state. The role of interlayer coupling strength, which is determined by twist angle and buckling degree, in these exotic properties is discussed in terms of both the theoretical prediction and experimental measurement, and finally, the challenges and outlook for this field are discussed.

Graphene, an Interesting Nanocarbon Allotrope for Biosensing Applications: Advances, Insights, and Prospects

Graphene, a relatively new two-dimensional (2D) nanomaterial, possesses unique structure (e.g. lighter, harder, and more flexible than steel) and tunable physicochemical (e.g. electronical, optical) properties with potentially wide eco-friendly and cost-effective usage in biosensing. Furthermore, graphene-related nanomaterials (e.g. graphene oxide, doped graphene, carbon nanotubes) have inculcated tremendous interest among scientists and industrials for the development of innovative biosensing platforms, such as arrays, sequencers and other nanooptical/biophotonic sensing systems (e.g. FET, FRET, CRET, GERS). Indeed, combinatorial functionalization approaches are constantly improving the overall properties of graphene, such as its sensitivity, stability, specificity, selectivity, and response for potential bioanalytical applications. These include real-time multiplex detection, tracking, qualitative, and quantitative characterization of molecules (i.e. analytes [H₂O₂, urea, nitrite, ATP or NADH]; ions [Hg²⁺, Pb²⁺, or Cu²⁺]; biomolecules (DNA, iRNA, peptides, proteins, vitamins or glucose; disease biomarkers such as genetic alterations in BRCA1, p53) and cells (cancer cells, stem cells, bacteria, or viruses). However, there is still a paucity of comparative reports that critically evaluate the relative toxicity of carbon nanoallotropes in humans. This manuscript comprehensively reviews the biosensing applications of graphene and its derivatives (i.e. GO and rGO). Prospects and challenges are also introduced.

Tuning the Doping of Epitaxial Graphene on a Conventional Semiconductor via Substrate Surface Reconstruction

Combining scanning tunneling microscopy and angle-resolved photoemission spectroscopy, we demonstrate how to tune the doping of epitaxial graphene from p to n by exploiting the structural changes that occur spontaneously on the Ge surface upon thermal annealing. Furthermore, using first-principle calculations, we build a model that successfully reproduces the experimental observations. Since the ability to modify graphene electronic properties is of fundamental importance when it comes to applications, our results provide an important contribution toward the integration of graphene with conventional semiconductors.

Recent progress, challenges, and prospects in emerging group-VIA Xenes: synthesis, properties and novel applications

The discovery of graphene (G) attracted considerable attention to the study of other novel two-dimensional materials (2DMs), which is identified as modern day "alchemy" since researchers are converting the majority of promising periodic table elements into 2DMs. Among the family of 2DMs, the newly invented monoelemental, atomically thin 2DMs of groups IIIA-VIA, called "Xenes" (where, X = IIIA-VIA group elements, and "ene" is the Latin word for nanosheets (NSs)), are a very active area of research for the fabrication of future nanodevices with high speed, low cost and elevated efficiency. Currently, any novel structure of 2DMs from the typical Xenes will probably be applicable in electronic technology. Analysis of their possible highly sensitive synthesis and characterization present opportunities for theoretically examining proposed 2D-Xenes with atomic precision in ideal circumstances, thus providing theoretical predictions for experimental support. Several theoretically predicted and experimentally synthesized 2D-Xene materials have been investigated for the group-VIA elements (tellurene (2D-Te), and selenene (2D-Se)), which are similar to topological insulators (TIs), thus potentially rendering them suitable materials for application in upcoming nanodevices. Although the investigation and device application of these materials are still in their infancy, theoretical studies and a few experiment-based investigations have proven that they are complementary to conventional (i.e., layered bulk-derived) 2DMs. This review focuses on the synthesis of novel group-VIA Xenes (2D-Te and 2D-Se) and summarizes the current development in understanding their basic properties, with the current advancement in signifying device applications. Lastly, the future research prospects, further advanced applications and associated shortcomings of the group-VIA Xenes are summarized and highlighted.

Intercalation of Mn in graphene/Cu(111) interface: insights to the electronic and magnetic properties from theory

The effect of Mn intercalation on the atomic, electronic and magnetic structure of the graphene/Cu(111) interface is studied using state-of-the-art density functional theory calculations. Different structural models of the graphene-Mn-Cu(111) interface are investigated. While a Mn monolayer placed between graphene and Cu(111) (an unfavorable configuration) yields massive rearrangement of the graphene-derived [Formula: see text] bands in the vicinity of the Fermi level, the possible formation of a [Formula: see text]Mn alloy at the interface (a favorable configuration) preserves the linear dispersion for these bands. The deep analysis of the electronic states around the Dirac point for the graphene/[Formula: see text]Mn/Cu(111) system allows to discriminate between contributions from three carbon sublattices of a graphene layer in this system and to explain the bands' as well as spins' topology of the electronic states around the Fermi level.

Empty electron states in cobalt-intercalated graphene

The dispersion of the electronic states of epitaxial graphene (Gr) depends significantly on the strength of the bonding with the underlying substrate. We report on empty electron states in cobalt-intercalated Gr grown on Ir(111), studied by angle-resolved inverse photoemission spectroscopy and x-ray absorption spectroscopy, complemented with density functional theory calculations. The weakly bonded Gr on Ir preserves the peculiar spectroscopic features of the Gr band structure, and the empty spectral densities are almost unperturbed. Upon intercalation of a Co layer, the electronic response of the interface changes, with an intermixing of the Gr π^* bands and Co d states, which breaks the symmetry of π/σ states, and a downshift of the upper part of the Gr Dirac cone. Similarly, the image potential of Ir(111) is unaltered by the Gr layer, while a downward shift is induced upon Co intercalation, as unveiled by the image state energy dispersion mapped in a large region of the surface Brillouin zone.

Growth and electronic properties of bi- and trilayer graphene on Ir(111)

Interesting electronic properties arise in vertically stacked graphene sheets, some of which can be controlled by mutual orientation of the adjacent layers. In this study, we investigate the MBE grown multilayer graphene on Ir(111) by means of STM, LEED and XPS and we examine the influence of the substrate on the geometric and electronic properties of bilayer graphene by employing XSW and ARPES measurements. We find that the MBE method does not limit the growth to two graphene layers and that the wrinkles, which arise through extended carbon deposition, play a crucial role in the multilayer growth. We also find that the bilayer and trilayer graphene sheets have graphitic-like properties in terms of the separation between the two layers and their stacking. The presence of the iridium substrate imposes a periodic potential induced by the moiré pattern that was found to lead to the formation of replica bands and minigaps in bilayer graphene. From tight-binding fits to our ARPES data we find that band renormalization takes place in multilayer graphene due to a weaker coupling of the upper-most graphene layer to the iridium substrate.

Band Bending and Valence Band Quantization at Line Defects in MoS2

The variation of the electronic structure normal to 1D defects in quasi-freestanding MoS₂, grown by molecular beam epitaxy, is investigated through high resolution scanning tunneling spectroscopy at 5 K. Strong upward bending of valence and conduction bands toward the line defects is found for the 4|4E mirror twin boundary and island edges but not for the 4|4P mirror twin boundary. Quantized energy levels in the valence band are observed wherever upward band bending takes place. Focusing on the common 4|4E mirror twin boundary, density functional theory calculations give an estimate of its charging, which agrees well with electrostatic modeling. We show that the line charge can also be assessed from the filling of the boundary-localized electronic band, whereby we provide a measurement of the theoretically predicted quantized polarization charge at MoS₂ mirror twin boundaries. These calculations elucidate the origin of band bending and charging at these 1D defects in MoS₂. The 4|4E mirror twin boundary not only impairs charge transport of electrons and holes due to band bending, but holes are additionally subject to a potential barrier, which is inferred from the independence of the quantized energy landscape on either side of the boundary.

Growth, morphology and electronic properties of epitaxial graphene on vicinal Ir(332) surface

Superlattice induced minigaps in graphene band structure due to underlying one-dimensional nanostructuration has been demonstrated. A superperiodic potential can be introduced in graphene if the substrate is periodically structured. The successful preparation of a periodically nanostructured substrate in large scale can be obtained by carefully studying the electronic structure with a spatial averaging technique such as high-energy resolution photoemission. In this work, we present two different growth methods such as temperature programmed growth (TPG) and chemical vapor deposition (CVD) studied by scanning tunnelling microscopy (STM) and low energy electron diffraction (LEED). In both methods, we show that the original steps of Ir(332) have modified with (111) terraces and step bunching after graphene growth. Graphene grows continuously over the terrace and the step bunching areas. We observe that while TPG growth does not give rise to a well-defined surface periodicity required for opening a bandgap, the CVD growth does. By combining with angle-resolved photoemission spectroscopy (ARPES) measurements, we correlate the obtained spatial periodicity to observed band gap opening in graphene.

Variational model for a rippled graphene sheet

The calculus of variations is utilised to study the behaviour of a rippled graphene sheet supported on a metal substrate. We propose a model that is underpinned by two key parameters, the bending rigidity of graphene γ, and the van der Waals interaction strength ξ. Three cases are considered, each of which addresses a specific configuration of a rippled graphene sheet located on a flat substrate. The transitional case assumes that both the graphene sheet length and substrate length are constrained. The substrate constrained case assumes only the substrate has a constrained length. Finally, the graphene constrained case assumes only the length of the graphene sheet is constrained. Numerical results are presented for each case, and the interpretation of these results demonstrates a continuous relationship between the total energy per unit length and the substrate length, that incorporates all three configurations. The present model is in excellent agreement with earlier results of molecular dynamics (MD) simulations in predicting the profiles of graphene ripples.

Direct observation of minibands in a twisted graphene/WS2 bilayer

Stacking two-dimensional (2D) van der Waals materials with different interlayer atomic registry in a heterobilayer causes the formation of a long-range periodic superlattice that may bestow the heterostructure with properties such as new quantum fractal states or superconductivity. Recent optical measurements of transition metal dichalcogenide (TMD) heterobilayers have revealed the presence of hybridized interlayer electron-hole pair excitations at energies defined by the superlattice potential. The corresponding quasiparticle band structures, so-called minibands, have remained elusive, and no such features have been reported for heterobilayers composed of a TMD and another type of 2D material. We introduce a new x-ray capillary technology for performing microfocused angle-resolved photoemission spectroscopy with a spatial resolution of ~1 μm, and directly observe minibands at certain twist angles in mini Brillouin zones (mBZs). We discuss their origin in terms of initial and final state effects by analyzing their dispersion in distinct mBZs.

Towards standardisation of contact and contactless electrical measurements of CVD graphene at the macro-, micro- and nano-scale

Graphene has become the focus of extensive research efforts and it can now be produced in wafer-scale. For the development of next generation graphene-based electronic components, electrical characterization of graphene is imperative and requires the measurement of work function, sheet resistance, carrier concentration and mobility in both macro-, micro- and nano-scale. Moreover, commercial applications of graphene require fast and large-area mapping of electrical properties, rather than obtaining a single point value, which should be ideally achieved by a contactless measurement technique. We demonstrate a comprehensive methodology for measurements of the electrical properties of graphene that ranges from nano- to macro- scales, while balancing the acquisition time and maintaining the robust quality control and reproducibility between contact and contactless methods. The electrical characterisation is achieved by using a combination of techniques, including magneto-transport in the van der Pauw geometry, THz time-domain spectroscopy mapping and calibrated Kelvin probe force microscopy. The results exhibit excellent agreement between the different techniques. Moreover, we highlight the need for standardized electrical measurements in highly controlled environmental conditions and the application of appropriate weighting functions.

Quantum Well States for Graphene Spin-Texture Engineering

The modification of graphene band structure, in particular via induced spin-orbit coupling, is currently a great challenge for the scientific community from both a fundamental and applied point of view. Here, we investigate the modification of the electronic structure of graphene (gr) initially adsorbed on Ir(111) via intercalation of one monolayer Pd by means of angle-resolved photoelectron spectroscopy and density functional theory. We reveal that for the gr/Pd/Ir(111) intercalated system, a spin splitting of graphene π states higher than 200 meV is present near the graphene K point. This spin separation arises from the hybridization of the graphene valence band states with spin-polarized quantum well states of a single Pd layer on Ir(111). Our results demonstrate that the proposed approach on the tailoring of the dimensionality of heavy materials interfaced with a graphene layer might lead to a giant spin-orbit splitting of the graphene valence band states.

Thermally Activated Processes for Ferromagnet Intercalation in Graphene-Heavy Metal Interfaces

The development of graphene (Gr) spintronics requires the ability to engineer epitaxial Gr heterostructures with interfaces of high quality, in which the intrinsic properties of Gr are modified through proximity with a ferromagnet to allow for efficient room temperature spin manipulation or the stabilization of new magnetic textures. These heterostructures can be prepared in a controlled way by intercalation through graphene of different metals. Using photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), we achieve a nanoscale control of thermally activated intercalation of a homogeneous ferromagnetic (FM) layer underneath epitaxial Gr grown onto (111)-oriented heavy metal (HM) buffers deposited, in turn, onto insulating oxide surfaces. XPS and STM demonstrate that Co atoms evaporated on top of Gr arrange in 3D clusters and, upon thermal annealing, penetrate through and diffuse below Gr in a 2D fashion. The complete intercalation of the metal occurs at specific temperatures, depending on the type of metallic buffer. The activation energy and the optimum temperature for the intercalation processes are determined. We describe a reliable method to fabricate and characterize in situ high-quality Gr-FM/HM heterostructures, enabling the realization of novel spin-orbitronic devices that exploit the extraordinary properties of Gr.

Tuning the properties of boron-doped reduced graphene oxide by altering the boron content

Boron-doping enhanced the occurrence of the energy bandgap, the pore structure and interfacial charge transfer characteristics.

Common surface structures of graphene and Au(111): The effect of rotational angle on adsorption and electronic properties

Graphene adsorption on the Au(111) surface was explored to identify its common surface structures by means of van der Waals corrected density functional theory calculations. The alignment of graphene in the form of certain rotational angles on the gold surface has an important role in lattice matching, which causes Moiré patterns, and in the electronic properties of the resulting common cell structures. Dispersive weak interactions between carbon and gold layers lead to a downward shift of Fermi energy of the adsorption system with respect to the Dirac point of graphene showing a p-type doping character. Moreover, the shift was shown to depend on the rotational angle of graphene on Au(111).

Translucency of Graphene to van der Waals Forces Applies to Atoms/Molecules with Different Polar Character

Graphene has been proposed to be either fully transparent to van der Waals interactions to the extent of allowing switching between hydrophobic and hydrophilic behavior, or partially transparent (translucent), yet there has been considerable debate on this topic, which is still ongoing. In a combined experimental and theoretical study we investigate the effects of different metal substrates on the adsorption energy of atomic (argon) and molecular (carbon monoxide) adsorbates on high-quality epitaxial graphene. We demonstrate that while the adsorption energy is certainly affected by the chemical composition of the supporting substrate and by the corrugation of the carbon lattice, the van der Waals interactions between adsorbates and the metal surfaces are partially screened by graphene. Our results indicate that the concept of graphene translucency, already introduced in the case of water droplets, is found to hold more generally also in the case of single polar molecules and atoms, which are apolar.

Concentration-Diversified Magnetic and Electronic Properties of Halogen-Adsorbed Silicene

Diverse magnetic and electronic properties of halogen-adsorbed silicene are investigated by the first-principle theoretical framework, including the adatom-diversified geometric structures, atom-dominated energy bands, spatial spin density distributions, spatial charge density distributions and its variations, and orbital-projected density of states. Also, such physical quantities are sufficient to identify similar and different features in the double-side and single-side adsorptions. The former belongs to the concentration-depended finite gap semiconductors or p-type metals, while the latter display the valence energy bands with/without spin-splitting intersecting with the Fermi level. Both adsorption types show the halogen-related weakly dispersed bands at deep energies, the adatom-modified middle-energy σ bands, and the recovery of low-energy π bands during the decrease of the halogen concentrations. Such feature-rich band structures can be verified by the angle-resolved photoemission spectroscopy experiment.

Temperature-Controlled Rotational Epitaxy of Graphene

When graphene is placed on a crystalline surface, the periodic structures within the layers superimpose and moiré superlattices form. Small lattice rotations between the two materials in contact strongly modify the moiré lattice parameter, upon which many electronic, vibrational, and chemical properties depend. While precise adjustment of the relative orientation in the degree- and sub-degree-range can be achieved via careful deterministic transfer of graphene, we report on the spontaneous reorientation of graphene on a metallic substrate, Ir(111). We find that selecting a substrate temperature between 1530 and 1000 K during the growth of graphene leads to distinct relative rotational angles of 0°, ± 0.6°, ±1.1°, and ±1.7°. When modeling the moiré superlattices as two-dimensional coincidence networks, we can ascribe the observed rotations to favorable low-strain graphene structures. The dissimilar thermal expansion of the substrate and graphene is regarded as an effective compressive biaxial pressure that is more easily accommodated in graphene by small rotations rather than by compression.