Airborne transmission of respiratory viruses

Cyclic swelling enabled, electrically conductive 3D porous structures for microfluidic urinalysis devices

Urinalysis is a simple and non-invasive approach for the diagnosis and monitoring of organ health and also is often used as a facile technique in assessment of substance abuse. However, quantitative urinalysis is predominantly limited to clinical laboratories. Here, we present an electrical sensing based, reusable, cellular microfluidic device that offers a fast urinalysis through quantitative reading of the electrical signals. The spatial soft porous scaffolds decorated with electrically conductive multiwalled carbon nanotubes that are capable of physically interacting with biomarkers in urine are developed through a cyclic swelling/absorption process of soft materials and are utilized to manufacture the cellular microfluidic device. The sensing capability, sensitivity and reusability (via sunlight exposure) of the device to monitor red blood cells, Escherichia coli, and albumin are systemically demonstrated by programming mechanical deformation of porous scaffolds. Ex vivo experiments in disease mouse models confirm the diagnosis robustness of the device in comparable results with existing biochemical tests. The full integration of electrically conductive nanomaterials into soft scaffolds provides a foundation for devising bioelectronic devices with mechanically programmable microfluidic features in a low-cost manner, with broad applications for rapid disease diagnoses through body fluid.

New endemic and pandemic pathologies with interhuman airborne transmission through ear, nose and throat anatomical sites

The current severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has once again stigmatised the importance of airborne pathogens and their clinical, social and public health impact. Respiratory viruses are transmitted between individuals when the pathogen is released from the upper airways or from the lower respiratory tract of an infected individual. Airborne transmission is defined as the inhalation of the infectious aerosol, named droplet nuclei which size is smaller than 5 mm and that can be inhaled at a distance up to 2 metres. This route of transmission is relevant for viral respiratory pathogens, including severe acute respiratory syndrome coronavirus (SARS-CoV), Middle East respiratory syndrome (MERS)-CoV, influenza virus, human rhinovirus, respiratory syncytial virus (RSV) and other respiratory virus families that differ in viral and genomic structures, susceptibility of a population to the infection, severity, transmissibility, ways of transmission and seasonal recurrence. Human respiratory viruses generally infect cells of the upper respiratory tract, eliciting respiratory signs and symptoms, sometimes without the possibility to differentiate them clinically. As seen by the current Coronavirus Disease 2019 (COVID-19) pandemic, human respiratory viruses can substantially contribute to increased morbidity and mortality, economic losses and, eventually, social disruption. In this article, we describe the structural, clinical and transmission aspects of the main respiratory viruses responsible for endemic, epidemic and pandemic infections.

Portable air cleaners and residential exposure to SARS-CoV-2 aerosols: A real-world study

Individuals with COVID-19 who do not require hospitalization are instructed to self-isolate in their residences. Due to high secondary infection rates in household members, there is a need to understand airborne transmission of SARS-CoV-2 within residences. We report the first naturalistic intervention study suggesting a reduction of such transmission risk using portable air cleaners (PACs) with HEPA filters. Seventeen individuals with newly diagnosed COVID-19 infection completed this single-blind, crossover, randomized study. Total and size-fractionated aerosol samples were collected simultaneously in the self-isolation room with the PAC (primary) and another room (secondary) for two consecutive 24-h periods, one period with HEPA filtration and the other with the filter removed (sham). Seven out of sixteen (44%) air samples in primary rooms were positive for SARS-CoV-2 RNA during the sham period. With the PAC operated at its lowest setting (clean air delivery rate [CADR] = 263 cfm) to minimize noise, positive aerosol samples decreased to four out of sixteen residences (25%; p = 0.229). A slight decrease in positive aerosol samples was also observed in the secondary room. As the world confronts both new variants and limited vaccination rates, our study supports this practical intervention to reduce the presence of viral aerosols in a real-world setting.

Visualization of the infection risk assessment of SARS-CoV-2 through aerosol and surface transmission in a negative-pressure ward

Since December 2019, coronavirus disease (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has become a great challenge to the world's public health system. Nosocomial infections have occurred frequently in medical institutions worldwide during this pandemic. Thus, there is an urgent need to construct an effective surveillance and early warning system for pathogen exposure and infection to prevent nosocomial infections in negative-pressure wards. In this study, visualization and construction of an infection risk assessment of SARS-CoV-2 through aerosol and surface transmission in a negative-pressure ward were performed to describe the distribution regularity and infection risk of SARS-CoV-2, the critical factors of infection, the air changes per hour (ACHs) and the viral variation that affect infection risk. The SARS-CoV-2 distribution data from this model were verified by field test data from the Wuhan Huoshenshan Hospital ICU ward. ACHs have a great impact on the infection risk from airborne exposure, while they have little effect on the infection risk from surface exposure. The variant strains demonstrated significantly increased viral loads and risks of infection. The level of protection for nurses and surgeons should be increased when treating patients infected with variant strains, and new disinfection methods, electrostatic adsorption and other air purification methods should be used in all human environments. The results of this study may provide a theoretical reference and technical support for reducing the occurrence of nosocomial infections.

Management of the wound care clinic during the novel coronavirus pneumonia pandemic period: Sharing of management experience in a general hospital of China

With the surge in the confirmed cases of the novel coronavirus pneumonia, medical resources in many countries have been put on red alert levels. The operation management systems of hospitals, including wound care clinics, must be innovated to ensure the normal operation of the hospital and meet the medical care needs of the people. At the same time, scientific control measures are also required to prevent the spread of the novel coronavirus pneumonia in the hospital. Actually, during the novel coronavirus pneumonia pandemic, emergency management methods for wound care clinics such as online appointments and remote online diagnosis and treatment, the rational arrangement of human resources, the scientific implementation of epidemic prevention and control measures, and the strict implementation of the management of the clinic environment and item disinfection measures to strengthen the management of protective materials, wound care materials, and dressing equipment by partition have been introduced and innovated, thus helping reduce the gathering of people in wound care clinics, create a safe medical environment, and avoid the spread of the novel coronavirus pneumonia caused by diagnosis and treatment.

SARS-CoV-2 cold-chain transmission: Characteristics, risks and strategies

Low temperature and certain humidity are conducive to severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) for long‐time survival and long‐distance spread during logistics and trades. Contaminated cold‐chain or frozen products and outer packaging act as the carrier of SARS‐CoV‐2, that infects the high‐risk population who works in the ports, cold storage or seafood market. Since the coronavirus disease 2019 (COVID‐19) pandemic worldwide, multiple localized outbreaks caused by SARS‐CoV‐2 contaminated imported cold‐chain products have been reported in China, which brought challenges to COVID‐19 prevention and control. Here, we review the evidences of SARS‐CoV‐2 cold‐chain transmission from six confirmed cold‐chain related COVID‐19 outbreaks in China, especially in terms of SARS‐CoV‐2 whole‐genome sequencing and virus isolation. In addition, we summarize the characteristics and mode of SARS‐CoV‐2 cold‐chain transmission from both six COVID‐19 outbreaks in China and the outbreaks suspected cold‐chain transmission in other countries. Finally, we analyze the underlying risks of SARS‐CoV‐2 cold‐chain transmission and propose the preventive countermeasures.

SARS‐CoV‐2 contaminated cold‐chain products can infect high‐risk populations and subsequently cause community transmission

Specific locations, such as seafood market stalls, can amplify outbreaks

Cold‐chain fomites accelerate global spread of SARS‐CoV‐2 and cause “silent transmission”

Rational sampling, comprehensive disinfection, protection of high‐risk groups and pollution classification are the main strategies

Combined Subcutaneous-Intranasal Immunization With Epitope-Based Antigens Elicits Binding and Neutralizing Antibody Responses in Serum and Mucosae Against PRRSV-2 and SARS-CoV-2

New vaccine design approaches, platforms, and immunization strategies might foster antiviral mucosal effector and memory responses to reduce asymptomatic infection and transmission in vaccinated individuals. Here, we investigated a combined parenteral and mucosal immunization scheme to induce local and serum antibody responses, employing the epitope-based antigens 3BT and NG19m. These antigens target the important emerging and re-emerging viruses PRRSV-2 and SARS-CoV-2, respectively. We assessed two versions of the 3BT protein, which contains conserved epitopes from the GP5 envelope protein of PRRSV-2: soluble and expressed by the recombinant baculovirus BacDual-3BT. On the other hand, NG19m, comprising the receptor-binding motif of the S protein of SARS-CoV-2, was evaluated as a soluble recombinant protein only. Vietnamese mini-pigs were immunized employing different inoculation routes: subcutaneous, intranasal, or a combination of both (s.c.-i.n.). Animals produced antigen-binding and neut1ralizing antibodies in serum and mucosal fluids, with varying patterns of concentration and activity, depending on the antigen and the immunization schedule. Soluble 3BT was a potent immunogen to elicit binding and neutralizing antibodies in serum, nasal mucus, and vaginal swabs. The vectored immunogen BacDual-3BT induced binding antibodies in serum and mucosae, but PRRSV-2 neutralizing activity was found in nasal mucus exclusively when administered intranasally. NG19m promoted serum and mucosal binding antibodies, which showed differing neutralizing activity. Only serum samples from subcutaneously immunized animals inhibited RBD-ACE2 interaction, while mini-pigs inoculated intranasally or via the combined s.c.-i.n. scheme produced subtle neutralizing humoral responses in the upper and lower respiratory mucosae. Our results show that intranasal immunization, alone or combined with subcutaneous delivery of epitope-based antigens, generates local and systemic binding and neutralizing antibodies. Further investigation is needed to evaluate the capability of the induced responses to prevent infection and reduce transmission.

Variations in human saliva viscoelasticity affect aerosolization propensity

Some contagious diseases, such as COVID-19, spread through the transmission of aerosols and droplets. Aerosol and droplet formation occurs inside and outside of the respiratory tract, the latter being observed during speaking and sneezing. Upon sneezing, saliva is expelled as a flat sheet, which destabilizes into filaments that subsequently break up into droplets. The presence of macromolecules (such as mucins) in saliva influences the dynamics of aerosol generation, since elasticity is expected to stabilize both fluid sheets and filaments, hence deterring droplet formation. In this study, the process of aerosol formation outside the respiratory tract is systematically replicated using an impinging jet setup, where two liquid jets collide and form a thin fluid sheet that can fragment into ligaments and droplets. The experimental setup enables us to investigate a range of dynamic conditions, quantified by the relevant non-dimensional numbers, which encompass those experienced during sneezing. Experiments are conducted with human saliva provided by different donors, revealing significant variations in their stability and breakup. We quantify the effect of viscoelasticity via shear and extensional rheology experiments, concluding that the extensional relaxation time is the most adequate measure of a saliva's elasticity. We summarize our results in terms of the dimensionless Weber, Reynolds, and Deborah numbers and construct universal state diagrams that directly compare our data to human sneezing, concluding that the aerosolization propensity is correlated with diminished saliva elasticities, higher emission velocities, and larger ejecta volumes. This could entail variations in disease transmission between individuals which hitherto have not been recognized.

SARS-CoV-2 and other respiratory pathogens are detected in continuous air samples from congregate settings

Two years after the emergence of SARS-CoV-2, there is still a need for better ways to assess the risk of transmission in congregate spaces. We deployed active air samplers to monitor the presence of SARS-CoV-2 in real-world settings across communities in the Upper Midwestern states of Wisconsin and Minnesota. Over 29 weeks, we collected 527 air samples from 15 congregate settings and detected 106 SARS-CoV-2 positive samples, demonstrating SARS-CoV-2 can be detected in air collected from daily and weekly sampling intervals. We expanded the utility of air surveillance to test for 40 other respiratory pathogens. Surveillance data revealed differences in timing and location of SARS-CoV-2 and influenza A virus detection in the community. In addition, we obtained SARS-CoV-2 genome sequences from air samples to identify variant lineages. Collectively, this shows air surveillance is a scalable, cost-effective, and high throughput alternative to individual testing for detecting respiratory pathogens in congregate settings.

Reverse genetics systems for SARS-CoV-2

The ongoing pandemic of coronavirus disease 2019 (COVID‐19) has caused severe public health crises and heavy economic losses. Limited knowledge about this deadly virus impairs our capacity to set up a toolkit against it. Thus, more studies on severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) biology are urgently needed. Reverse genetics systems, including viral infectious clones and replicons, are powerful platforms for viral research projects, spanning many aspects such as the rescues of wild‐type or mutant viral particles, the investigation of viral replication mechanism, the characterization of viral protein functions, and the studies on viral pathogenesis and antiviral drug development. The operations on viral infectious clones are strictly limited in the Biosafety Level 3 (BSL3) facilities, which are insufficient, especially during the pandemic. In contrast, the operation on the noninfectious replicon can be performed in Biosafety Level 2 (BSL2) facilities, which are widely available. After the outbreak of COVID‐19, many reverse genetics systems for SARS‐CoV‐2, including infectious clones and replicons are developed and given plenty of options for researchers to pick up according to the requirement of their research works. In this review, we summarize the available reverse genetics systems for SARS‐CoV‐2, by highlighting the features of these systems, and provide a quick guide for researchers, especially those without ample experience in operating viral reverse genetics systems.

Far-UVC (222 nm) efficiently inactivates an airborne pathogen in a room-sized chamber

Many infectious diseases, including COVID-19, are transmitted by airborne pathogens. There is a need for effective environmental control measures which, ideally, are not reliant on human behaviour. One potential solution is Krypton Chloride (KrCl) excimer lamps (often referred to as Far-UVC), which can efficiently inactivate pathogens, such as coronaviruses and influenza, in air. Research demonstrates that when KrCl lamps are filtered to remove longer-wavelength ultraviolet emissions they do not induce acute reactions in the skin or eyes, nor delayed effects such as skin cancer. While there is laboratory evidence for Far-UVC efficacy, there is limited evidence in full-sized rooms. For the first time, we show that Far-UVC deployed in a room-sized chamber effectively inactivates aerosolised Staphylococcus aureus. At a room ventilation rate of 3 air-changes-per-hour (ACH), with 5 filtered-sources the steady-state pathogen load was reduced by 98.4% providing an additional 184 equivalent air changes (eACH). This reduction was achieved using Far-UVC irradiances consistent with current American Conference of Governmental Industrial Hygienists threshold limit values for skin for a continuous 8-h exposure. Our data indicate that Far-UVC is likely to be more effective against common airborne viruses, including SARS-CoV-2, than bacteria and should thus be an effective and "hands-off" technology to reduce airborne disease transmission. The findings provide room-scale data to support the design and development of effective Far-UVC systems.

Singing Is a Risk Factor for SARS-CoV-2 Infection: A Case-control Study of Karaoke-related COVID-19 Outbreaks in Two Cities in Hokkaido, Japan, Linked by Whole Genome Analysis

Background

Singing in an indoor space may increase the risk of SARS-CoV-2 infection. We conducted a case-control study of karaoke-related COVID-19 outbreaks to reveal the risk factors for SARS-CoV-2 infection among individuals who participate in karaoke.

Methods

Cases were defined as people who enjoyed karaoke at a bar and who tested positive for SARS-CoV-2 by RT-PCR between May 16 and July 3, 2020. Controls were defined as people who enjoyed karaoke at the same bar during the same period as the cases and tested negative. Odds ratio (OR) and confidence interval (CI) were calculated. ORs were adjusted by variables with significantly high odds ratio (aOR).

Results

We identified 81 cases, the majority of whom were active elderly individuals (median age: 75 years). Six cases died (case fatality ratio: 7%). Among the cases, 68 (84%) were guests, 18 of whom had visited more than two karaoke bars. A genome analysis conducted in 30 cases showed six types of isolates within four single-nucleotide variations difference. The case-control study revealed that singing (aOR 11.0, 95% CI, 1.2-101.0), not wearing a mask (aOR 3.7, 95% CI 1.2-11.2) and time spent per visit (aOR 1.7, 95% CI 1.1-2.7) were associated with COVID-19 infection.

Conclusions

A karaoke-related COVID-19 outbreak that occurred in two different cities was confirmed by the results of genome analysis. Singing in less-ventilated, indoor and crowded environments increases the risk of acquiring SARS-CoV-2 infection. Wearing a mask and staying for only a short time can reduce the risk of infection during karaoke.

Mucins Inhibit Coronavirus Infection in a Glycan-Dependent Manner

Mucins are a diverse and heterogeneous family of glycoproteins that comprise the bulk of mucus and the epithelial glycocalyx. Mucins are intimately involved in viral transmission. Mucin and virus laden particles can be expelled from the mouth and nose to later infect others. Viruses must also penetrate the mucus layer before cell entry and replication. The role of mucins and their molecular structure have not been well-characterized in coronavirus transmission studies. Laboratory studies predicting high rates of fomite transmission have not translated to real-world infections, and mucins may be one culprit. Here, we probed both surface and direct contact transmission scenarios for their dependence on mucins and their structure. We utilized disease-causing, bovine-derived, human coronavirus OC43. We found that bovine mucins could inhibit the infection of live cells in a concentration- and glycan-dependent manner. The effects were observed in both mock fomite and direct contact transmission experiments and were not dependent upon surface material or time-on-surface. However, the effects were abrogated by removal of the glycans or in a cross-species infection scenario where bovine mucin could not inhibit the infection of a murine coronavirus. Together, our data indicate that the mucin molecular structure plays a complex and important role in host defense.

A novel VOC breath tracer method to evaluate indoor respiratory exposures in the near- and far-fields

Several studies suggest that far-field transmission (> 6 ft) explains the significant number of COVID-19 superspreading outbreaks. Therefore, quantitative evaluation of near- and far-field exposure to emissions from a source is key to better understanding human-to-human airborne infectious disease transmission and associated risks. In this study, we used an environmentally-controlled chamber to measure volatile organic compounds (VOCs) released from a healthy participant who consumed breath mints, which contained unique tracer compounds. Tracer measurements were made at 2.5 ft, 5 ft, 7.5 ft from the participant, as well as in the exhaust plenum of the chamber. We observed that 2.5 ft trials had substantially (~36-44%) higher concentrations than other distances during the first 20 minutes of experiments, highlighting the importance of the near-field relative to the far-field before virus-laden respiratory aerosol plumes are continuously mixed into the far-field. However, for the conditions studied, the concentrations of human-sourced tracers after 20 minutes and approaching the end of the 60-minute trials at 2.5 ft, 5 ft, and 7.5 ft were only ~18%, ~11%, and ~7.5% higher than volume-averaged concentrations, respectively. Our findings highlight the importance of far-field transmission of airborne pathogens including SARS-CoV-2, which need to be considered in public health decision making.

Human Multi-Compartment Airways-on-Chip Platform for Emulating Respiratory Airborne Transmission: From Nose to Pulmonary Acini

The past decade has witnessed tremendous endeavors to deliver novel preclinical in vitro lung models for pulmonary research endpoints, including foremost with the advent of organ- and lung-on-chips. With growing interest in aerosol transmission and infection of respiratory viruses within a host, most notably the SARS-CoV-2 virus amidst the global COVID-19 pandemic, the importance of crosstalk between the different lung regions (i.e., extra-thoracic, conductive and respiratory), with distinct cellular makeups and physiology, are acknowledged to play an important role in the progression of the disease from the initial onset of infection. In the present Methods article, we designed and fabricated to the best of our knowledge the first multi-compartment human airway-on-chip platform to serve as a preclinical in vitro benchmark underlining regional lung crosstalk for viral infection pathways. Combining microfabrication and 3D printing techniques, our platform mimics key elements of the respiratory system spanning (i) nasal passages that serve as the alleged origin of infections, (ii) the mid-bronchial airway region and (iii) the deep acinar region, distinct with alveolated airways. Crosstalk between the three components was exemplified in various assays. First, viral-load (including SARS-CoV-2) injected into the apical partition of the nasal compartment was detected in distal bronchial and acinar components upon applying physiological airflow across the connected compartment models. Secondly, nebulized viral-like dsRNA, poly I:C aerosols were administered to the nasal apical compartment, transmitted to downstream compartments via respiratory airflows and leading to an elevation in inflammatory cytokine levels secreted by distinct epithelial cells in each respective compartment. Overall, our assays establish an in vitro methodology that supports the hypothesis for viral-laden airflow mediated transmission through the respiratory system cellular landscape. With a keen eye for broader end user applications, we share detailed methodologies for fabricating, assembling, calibrating, and using our multi-compartment platform, including open-source fabrication files. Our platform serves as an early proof-of-concept that can be readily designed and adapted to specific preclinical pulmonary research endpoints.

Inactivation of Pathogens in Air Using Ultraviolet Direct Irradiation Below Exposure Limits

A method is described for inactivation of pathogens, especially airborne pathogens, using ultraviolet (UV) radiation emitted directly into occupied spaces and exposing occupants to a dose below the accepted actinic exposure limit (EL). This method is referred to as direct irradiation below exposure limits, or DIBEL. It is demonstrated herein that low-intensity UV radiation below exposure limits can achieve high levels of equivalent air changes per hour (ACHeq) and can be an effective component of efforts to combat airborne pathogens such as the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the virus that causes coronavirus disease 2019 (COVID-19). An ACHeq of 4 h-¹ is presently achievable over a continuous 8 h period for the SARS-CoV-2 virus with UV-C light-emitting diodes (LEDs) having peak wavelength at 275 nm, and future improvements in LED technology and optics are anticipated to enable improvements up to 150 h-¹ in the coming decade. For example, the actinic EL is 60 J/m² at 254 nm, and human coronaviruses, including SARS-CoV-2, have a UV dose required for 90 % inactivation of about 5 J/m² at 254 nm. Irradiation by 254 nm UV-C at the EL is expected to provide 90 % inactivation of these organisms in air in about 40 min when the UV-C is delivered at a constant irradiance over 8 h, or in about 5 min if the UV-C is delivered at a constant irradiance over 1 h. Since the irradiation is continuous, the inactivation of initial contaminants accumulates to 99 % and then 99.9 %, and it also immediately begins inactivating any newly introduced (e.g., exhaled) pathogens at the same rate throughout the 8 h period. The efficacy for inactivating airborne pathogens with DIBEL may be expressed in terms of ACHeq, which may be compared with conventional ventilation-based methods for air disinfection. DIBEL may be applied in addition to other disinfection methods, such as upper room UV germicidal irradiation, and mechanical ventilation and filtration. The ACHeq of the separate methods is additive, providing enhanced cumulative disinfection rates. Conventional air disinfection technologies have typical ACHeq values of about 1 h-¹ to 5 h-¹ and maximum practical values of about 20 h-¹. UV-C DIBEL currently provides ACHeq values that are typically about 1 h-¹ to 10 h-¹, thus either complementing, or potentially substituting for, conventional technologies. UV-C DIBEL protocols are forecast herein to evolve to >100 ACHeq in a few years, potentially surpassing conventional technologies. UV-A (315 nm to 400 nm) and/or UV-C (100 nm to 280 nm) DIBEL is also efficacious at inactivating pathogens on surfaces. The relatively simple installation, low acquisition and operating costs, and unobtrusive aesthetic of DIBEL using UV LEDs contribute value in a layered, multi-agent disinfection strategy.

COVID-19 Infection, Prevention, and Control Considerations in the Obstetric Environment

Pregnancy increases the risk of severe illness due to coronavirus disease 2019 (COVID-19). Thus, prevention of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) transmission in all obstetrical health care settings requires consistent implementation of multiple evidence-based practices and consideration of local epidemiology, local regulations for COVID-19, and guidance from the Centers for Disease Control and Prevention and Professional Societies. COVID-safe practices should be implemented for patients, visitors/support persons, and health care personnel and include screening, appropriate personal protective equipment, and transmission precautions. Vaccination of all health care personnel, pregnant people, and their support persons remains the best strategy to prevent COVID-19.

Recent Advances in Facemask Devices for In Vivo Sampling of Human Exhaled Breath Aerosols and Inhalable Environmental Exposures

Since the COVID-19 pandemic, the unprecedented use of facemasks has been requiring for wearing in daily life. By wearing facemask, human exhaled breath aerosols and inhaled environmental exposures can be efficiently filtered and thus various filtration residues can be deposited in facemask. Therefore, facemask could be a simple, wearable, in vivo, onsite and noninvasive sampler for collecting exhaled and inhalable compositions, and gain new insights into human health and environmental exposure. In this review, the recent advances in developments and applications of in vivo facemask sampling of human exhaled bacteria, viruses, proteins, and metabolites, and inhalable facemask contaminants and air pollutants, are reviewed. New features of facemask sampling are highlighted. The perspectives and challenges on further development and potential applications of facemask devices are also discussed.

SARS-CoV-2 aerosol transmission and detection

Aerosol transmission has been officially recognized by the world health authority resulting from its overwhelming experimental and epidemiological evidences. Despite substantial progress, few additional actions were taken to prevent aerosol transmission, and many key scientific questions still await urgent investigations. The grand challenge, the effective control of aerosol transmission of COVID-19, remains unsolved. A better understanding of the viral shedding into the air has been developed, but its temporal pattern is largely unknown. Sampling tools, as one of the critical elements for studying SARS-CoV-2 aerosol, are not readily available around the world. Many of them are less capable of preserving the viability of SARS-CoV-2, thus offering no clues about viral aerosol infectivity. As evidenced, the viability of SARS-CoV-2 is also directly impacted by temperature, humidity, sunlight, and air pollutants. For SARS-CoV-2 aerosol detection, liquid samplers, together with real-time polymerase chain reaction (RT-PCR), are currently used in certain enclosed or semi-enclosed environments. Sensitive and rapid COVID-19 screening technologies are in great need. Among others, the breath-borne-based method emerges with global attention due to its advantages in sample collection and early disease detection. To collectively confront these challenges, scientists from different fields around the world need to fight together for the welfare of mankind. This review summarized the current understanding of the aerosol transmission of SARS-CoV-2 and identified the key knowledge gaps with a to-do list. This review also serves as a call for efforts to develop technologies to better protect the people in a forthcoming reopening world.

Modeling the filtration efficiency of a woven fabric: The role of multiple lengthscales

During the COVID-19 pandemic, many millions have worn masks made of woven fabric to reduce the risk of transmission of COVID-19. Masks are essentially air filters worn on the face that should filter out as many of the dangerous particles as possible. Here, the dangerous particles are the droplets containing the virus that are exhaled by an infected person. Woven fabric is unlike the material used in standard air filters. Woven fabric consists of fibers twisted together into yarns that are then woven into fabric. There are, therefore, two lengthscales: the diameters of (i) the fiber and (ii) the yarn. Standard air filters have only (i). To understand how woven fabrics filter, we have used confocal microscopy to take three-dimensional images of woven fabric. We then used the image to perform lattice Boltzmann simulations of the air flow through fabric. With this flow field, we calculated the filtration efficiency for particles a micrometer and larger in diameter. In agreement with experimental measurements by others, we found that for particles in this size range, the filtration efficiency is low. For particles with a diameter of 1.5 μm, our estimated efficiency is in the range 2.5%-10%. The low efficiency is due to most of the air flow being channeled through relatively large (tens of micrometers across) inter-yarn pores. So, we conclude that due to the hierarchical structure of woven fabrics, they are expected to filter poorly.

Airborne magnetic nanoparticles may contribute to COVID-19 outbreak: Relationships in Greece and Iran

This work attempts to shed light on whether the COVID-19 pandemic rides on airborne pollution. In particular, a two-city study provides evidence that PM_2.5 contributes to the timing and severity of the epidemic, without adjustment for confounders. The publicly available data of deaths between March and October 2020, updated it on May 30, 2021, and the average seasonal concentrations of PM_2.5 pollution over the previous years in Thessaloniki, the second-largest city of Greece, were investigated. It was found that changes in coronavirus-related deaths follow changes in air pollution and that the correlation between the two data sets is maximized at the lag time of one month. Similar data from Tehran were gathered for comparison. The results of this study underscore that it is possible, if not likely, that pollution nanoparticles are related to COVID-19 fatalities (Granger causality, p < 0.05), contributing to the understanding of the environmental impact on pandemics.

High SARS-CoV-2 Infection Rates Among Special Forces Police Units During the Early Phase of the COVID-19 Pandemic in Ecuador

Background

At the beginning of the COVID-19 pandemic, health workers and first-responders, such as police officers, were in charge of trying to contain a disease that was unknown at that time. The lack of information and the tremendous need to contain new outbreaks put police officers at higher risk.

Methodology

A cross-sectional study was conducted to describe SARS-CoV-2 infection rates among Police Special Forces Officers in Quito, Ecuador. In this study, 163 community-dwelling police officers from elite divisions voluntarily participated in our SARS-CoV-2 detection program using reverse transcription quantitative real-time PCR (RT-qPCR).

Results

A total of 20 out of 163 police officers tested positive for SARS-CoV-2, yielding an infection rate of 12.3%. Within this cohort, 10% (2/20) of SARS-CoV-2 positive individuals were potentially super spreaders with viral loads over 10⁸ copies/ul. About 85% of the SARS-CoV-2 positive individuals were asymptomatic and 15% reported mild symptoms related to COVID-19.

Conclusions

We found a high SARS-CoV-2 infection rate within the special forces police officers that, beyond a high health risk for themselves, their families, and coworkers. Our results point out the need for permanent SARS-CoV-2 testing among asymptomatic essential workers and first-responders to avoid local outbreaks and to prevent work-place absenteeism among police special units.

Planes, Trains, and Automobiles: Use of Carbon Dioxide Monitoring to Assess Ventilation During Travel

Background: Travel poses a risk for transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and other respiratory viruses. Poorly ventilated indoor settings pose a particularly high risk for transmission.   Methods:  We used carbon dioxide measurements to assess adequacy of ventilation during 5 trips that included air travel. During selected parts of each trip that involved indoor settings, we monitored carbon dioxide levels every 1 minute and recorded peak levels and the number of people present. Carbon dioxide readings above 800 parts per million (ppm) were considered an indicator of suboptimal ventilation.      Results: Carbon dioxide levels remained below 800 ppm during train rides to and from the airport and inside airports except in a crowded boarding area with ~300 people present. Carbon dioxide levels exceeded 800 ppm inside the airplanes, but the air was filtered with high efficiency particulate air filters. Carbon dioxide levels remained below 800 ppm in common areas of a hotel but exceeded 800 ppm in a hotel room with 2 to 3 occupants and in a fitness center with 3 people exercising. In restaurants, carbon dioxide levels increased above 800 ppm during crowded conditions with 24 or more people present and 75% or more seat occupancy. Conclusion: Our results suggest that ventilation may be sufficient to minimize the risk for airborne transmission in many situations during travel. However, ventilation may be suboptimal in some areas or under certain conditions such as in hotel rooms or when restaurants, fitness centers, or airplane boarding areas are crowded. There is a need for larger scale studies to assess the quality of ventilation in a wide range of community settings.  

Modeling the Airborne Transmission of SARS-CoV-2 in Public Transport

This study presents the transmission of SARS-CoV-2 in the main types of public transport vehicles and stations to comparatively assess the relative theoretical risk of infection of travelers. The presented approach benchmarks different measures to reduce potential exposure in public transport and compares the relative risk between different means of transport and situations encountered. Hence, a profound base for the selection of measures by operators, travelers and staff is provided. Zonal modeling is used as the simulation method to estimate the exposure to passengers in the immediate vicinity as well as farther away from the infected person. The level of exposure to passengers depends on parameters such as the duration of stay and travel profile, as well as the ventilation situation and the wearing of different types of masks. The effectiveness of technical and behavioral measures to minimize the infection risk is comparatively evaluated. Putting on FFP2 (N95) masks and refraining from loud speech decreases the inhaled viral load by over 99%. The results show that technical measures, such as filtering the recirculated air, primarily benefit passengers who are a few rows away from the infected person by reducing exposure 84–91%, whereas near-field exposure is only reduced by 30–69%. An exception is exposure in streetcars, which in the near-field is 17% higher due to the reduced air volume caused by the filter. Thus, it can be confirmed that the prevailing measures in public transport protect passengers from a high theoretical infection risk. At stations, the high airflows and the large air volume result in very low exposures (negligible compared to the remaining means of transport) provided that distance between travelers is kept. The comparison of typical means of transport indicates that the inhaled quanta dose depends primarily on the duration of stay in the vehicles and only secondarily on the ventilation of the vehicles. Due to the zonal modeling approach, it can also be shown that the position of infected person relative to the other passengers is decisive in assessing the risk of infection.

Review of component designs for post-COVID-19 HVAC systems: Possibilities and challenges

The globally occurring recurrent waves of the COVID-19 pandemic, primarily caused by the transmission of aerosolized droplets from an infected person to a healthy person in the indoor environment, has led to the urgency of designing new modes of indoor ventilation. To prevent cross-contaminations due to airborne viruses, bacteria, and other pollutants in indoor environments, heating ventilation and air-conditioning (HVAC) systems need to be redesigned with anti-pandemic components. The three vital anti-pandemic components for the post-COVID-19 HVAC systems, as identified by the authors, are: a biological contaminant inactivation unit, a volatile organic compound decomposition unit, and an advanced air filtration unit. The purpose of the current article is to provide an overview of the latest research outcomes toward designing these anti-pandemic components and pointing out the future promises and challenges. In addition, the role of personalized ventilation in minimizing the risk of indoor cross-contamination by employing various air terminal devices is discussed. The authors believe that this article will encourage HVAC designers to develop effective anti-pandemic components to minimize the indoor airborne transmission.

A video-based analysis of situations bearing the risk of respiratory disease transmission during football matches

We aimed to analyze the number and type of contacts involving the risk of respiratory disease transmission during football match play. We analysed 50 matches from different playing levels. Two reviewers evaluated the contacts of all players in each match. We focused on between-player contacts, crowding, actions with potentially increased aerosol and droplet production and within-player hand-to-head contacts. We categorized the duels with direct contact into frontal and other ones and measured contact duration. The number of between-player contacts were similar between playing levels (median 28.3 [IQR 22.6, 33] contacts per player-hour). Frontal contacts summed up to 8% of all contacts. Contacts involving the head occurred less than once per player and match with none lasting longer than 3 s. Crowding included between two and six players and the duration was mostly less than 10 s. Aerosol and droplet producing activities were three to four times more frequent in adult compared to youth players. Our results suggest that the risk of respiratory pathogen transmission is low during football matches. This conclusion is based on the finding that most close contact situations are of short duration and on the fact that it is an outdoor sport.

Airborne Transmission of SARS-CoV-2: Evidence and Implications for Engineering Controls

Since late 2019, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has spread globally, causing a pandemic (coronavirus disease 2019, or COVID-19) with dire consequences, including widespread death, long-term illness, and societal and economic disruption. Although initially uncertain, evidence is now overwhelming that SARS-CoV-2 is transmitted primarily through small respiratory droplets and aerosols emitted by infected individuals. As a result, many effective nonpharmaceutical interventions for slowing virus transmission operate by blocking, filtering, or diluting respiratory aerosol, particularly in indoor environments. In this review, we discuss the evidence for airborne transmission of SARS-CoV-2 and implications for engineering solutions to reduce transmission risk. Expected final online publication date for the Annual Review of Chemical and Biomolecular Engineering, Volume 13 is October 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

The COVID-19/Tuberculosis Syndemic and Potential Antibody Therapy for TB Based on the Lessons Learnt From the Pandemic

2020 will be marked in history for the dreadful implications of the COVID-19 pandemic that shook the world globally. The pandemic has reshaped the normality of life and affected mankind in the aspects of mental and physical health, financial, economy, growth, and development. The focus shift to COVID-19 has indirectly impacted an existing air-borne disease, Tuberculosis. In addition to the decrease in TB diagnosis, the emergence of the TB/COVID-19 syndemic and its serious implications (possible reactivation of latent TB post-COVID-19, aggravation of an existing active TB condition, or escalation of the severity of a COVID-19 during TB-COVID-19 coinfection), serve as primary reasons to equally prioritize TB. On a different note, the valuable lessons learnt for the COVID-19 pandemic provide useful knowledge for enhancing TB diagnostics and therapeutics. In this review, the crucial need to focus on TB amid the COVID-19 pandemic has been discussed. Besides, a general comparison between COVID-19 and TB in the aspects of pathogenesis, diagnostics, symptoms, and treatment options with importance given to antibody therapy were presented. Lastly, the lessons learnt from the COVID-19 pandemic and how it is applicable to enhance the antibody-based immunotherapy for TB have been presented.

Computer Simulation of the Surface of Aqueous Ionic and Surfactant Solutions

The surface of aqueous solutions of simple salts was not the main focus of scientific attention for a long while. Considerable interest in studying such systems has only emerged in the past two decades, following the pioneering finding that large halide ions, such as I^-, exhibit considerable surface affinity. Since then, a number of issues have been clarified; however, there are still several unresolved points (e.g., the effect of various salts on lateral water diffusion at the surface) in this respect. Computer simulation studies of the field have largely benefited from the appearance of intrinsic surface analysis methods, by which the particles staying right at the boundary of the two phases can be unambiguously identified. Considering complex ions instead of simple ones opens a number of interesting questions, both from the theoretical point of view and from that of the applications. Besides reviewing the state-of-the-art of intrinsic surface analysis methods as well as the most important advances and open questions concerning the surface of simple ionic solutions, we focus on two such systems in this Perspective, namely, the surface of aqueous mixtures of room temperature ionic liquids and that of ionic surfactants. In the case of the former systems, for which computer simulation studies have still scarcely been reported, we summarize the theoretical advances that could trigger such investigations, which might well be of importance also from the point of view of industrial applications. Computer simulation methods are, on the other hand, widely used in studies of the surface of surfactant solutions. Here we review the most important theoretical advances and issues to be addressed and discuss two areas of applications, namely, the inclusion of information gathered from such simulations in large scale atmospheric models and the better understanding of the airborne transmission of viruses, such as SARS-CoV-2.

Cold chain and severe acute respiratory syndrome coronavirus 2 transmission: a review for challenges and coping strategies

Since June 2020, the re-emergence of coronavirus disease 2019 (COVID-19) epidemics in parts of China was linked to the cold chain, which attracted extensive attention and heated discussions from the public. According to the typical characteristics of these epidemics, we speculated a possible route of transmission from cold chain to human. A series of factors in the supply chain contributed to the epidemics if the cold chain were contaminated by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), such as temperature, humidity, personal hygiene/protection, and disinfection. The workers who worked in the cold chain at the receiving end faced a higher risk of being infected when they were not well protected. Facing the difficult situation, China put forward targeted and powerful countermeasures to block the cold chain-related risk. However, in the context of the unstable pandemic situation globally, the risk of the cold chain needs to be recognized and evaluated seriously. Hence, in this review, we reviewed the cold chain-related epidemics in China, analyzed the possible mechanisms, introduced the Chinese experience, and suggested coping strategies for the global epidemic prevention and control.

Use of carbon dioxide measurements to assess ventilation in an acute care hospital

Poorly ventilated indoor spaces pose a risk for airborne transmission of SARS-CoV-2. We measured carbon dioxide levels in a multiple areas in an acute care hospital to assess the adequacy of ventilation. Carbon dioxide levels remained below 800 parts per million in most areas but exceeded this level in a small conference room with 8 occupants, an office with 3 occupants, and a bathroom with 2 occupants. Measuring carbon dioxide levels could provide a simple means for healthcare facilities to assess the adequacy of ventilation.

SARS-CoV-2 detection in bioaerosols using a liquid impinger collector and ddPCR

The airborne route is the dominant form of COVID-19 transmission, and therefore, the development of methodologies to quantify SARS-CoV-2 in bioaerosols is needed. We aimed to identify SARS-CoV-2 in bioaerosols by using a highly efficient sampler for the collection of 1-3 µm particles, followed by a highly sensitive detection method. 65 bioaerosol samples were collected in hospital rooms in the presence of a COVID-19 patient using a liquid impinger sampler. The SARS-CoV-2 genome was detected by ddPCR using different primer/probe sets. 44.6% of the samples resulted positive for SARS-CoV-2 following this protocol. By increasing the sampled air volume from 339 to 650 L, the percentage of positive samples went from 41% to 50%. We detected five times less positives with a commercial one-step RT-PCR assay. However, the selection of primer/probe sets might be one of the most determining factor for bioaerosol SARS-CoV-2 detection since with the ORF1ab set more than 40% of the samples were positive, compared to <10% with other sets. In conclusion, the use of a liquid impinger collector and ddPCR is an adequate strategy to detect SARS-CoV-2 in bioaerosols. However, there are still some methodological aspects that must be adjusted to optimize and standardize a definitive protocol.

Dispersion of SARS-CoV-2 in air surrounding COVID-19-infected individuals with mild symptoms

Since the beginning of the pandemic, the transmission modes of SARS-CoV-2-particularly the role of aerosol transmission-have been much debated. Accumulating evidence suggests that SARS-CoV-2 can be transmitted by aerosols, and not only via larger respiratory droplets. In this study, we quantified SARS-CoV-2 in air surrounding 14 test subjects in a controlled setting. All subjects had SARS-CoV-2 infection confirmed by a recent positive PCR test and had mild symptoms when included in the study. RT-PCR and cell culture analyses were performed on air samples collected at distances of one, two, and four meters from test subjects. Oronasopharyngeal samples were taken from consenting test subjects and analyzed by RT-PCR. Additionally, total aerosol particles were quantified during air sampling trials. Air viral concentrations at one-meter distance were significantly correlated with both viral loads in the upper airways, mild coughing, and fever. One sample collected at four-meter distance was RT-PCR positive. No samples were successfully cultured. The results reported here have potential application for SARS-CoV-2 detection and monitoring schemes, and for increasing our understanding of SARS-CoV-2 transmission dynamics. Practical implications. In this study, quantification of SARS-CoV-2 in air was performed around infected persons with mild symptoms. Such persons may go longer before they are diagnosed and may thus be a disproportionately important epidemiological group. By correlating viral concentrations in air with behavior and symptoms, we identify potential risk factors for viral dissemination in indoor environments. We also show that quantification of total aerosol particles is not a useful strategy for monitoring SARS-CoV-2 in indoor environments.

Face mask fit modifications that improve source control performance

BACKGROUND

During the COVID-19 pandemic, face masks are used as source control devices to reduce the expulsion of respiratory aerosols from infected people. Modifications such as mask braces, earloop straps, knotting and tucking, and double masking have been proposed to improve mask fit however the data on source control are limited.

METHODS

The effectiveness of mask fit modifications was determined by conducting fit tests on human subjects and simulator manikins and by performing simulated coughs and exhalations using a source control measurement system.

RESULTS

Medical masks without modification blocked ≥56% of cough aerosols and ≥42% of exhaled aerosols. Modifying fit by crossing the earloops or placing a bracket under the mask did not increase performance, while using earloop toggles, an earloop strap, and knotting and tucking the mask increased performance. The most effective modifications for improving source control performance were double masking and using a mask brace. Placing a cloth mask over a medical mask blocked ≥85% of cough aerosols and ≥91% of exhaled aerosols. Placing a brace over a medical mask blocked ≥95% of cough aerosols and ≥99% of exhaled aerosols.

CONCLUSIONS

Fit modifications can greatly improve the performance of face masks as source control devices for respiratory aerosols.

Repatriation of a Critically Ill Coronavirus Disease 2019–Positive Patient Across Closed Borders

We report on the international retrieval of a critically ill, ventilated, coronavirus disease 2019–positive patient from Dili, East Timor, into the intensive care unit of the Royal Darwin Hospital in Australia. The patient had severe respiratory failure, and the medical team in Dili was struggling to maintain adequate oxygenation with a fraction of inspired oxygen of 1 most of the time. This occurred during an outbreak of coronavirus disease 2019 in East Timor, placing strain on the local health system. Therefore, it was decided to transfer the patient to Australia. Given the closed international borders of Australia, organization of the retrieval and infection control measures were challenging and are described in the article. We discuss the need for a pathway to retrieve critically ill patients into a well-resourced country during a pandemic and the importance of public health measures including a robust vaccination program.

Rapid Control of a SARS-CoV-2 B.1.617.2 (Delta) Variant COVID-19 Community Outbreak: The Successful Experience in Pingtung County of Taiwan

The Severe Acute Respiratory Syndrome-associated Coronavirus 2 (SARS-CoV-2) was an outbreak in December, 2019 and rapidly spread to the world. All variants of SARS-CoV-2, including the globally and currently dominant Delta variant (Delta-SARS-CoV-2), caused severe disease and mortality. Among all variants, Delta-SARS-CoV-2 had the highest transmissibility, growth rate, and secondary attack rate than other variants except for the new variant of Omicron that still exists with many unknown effects. In Taiwan, the pandemic Delta-SARS-CoV-2 began in Pingtung from 14 June 2021 and ceased at 11 July 2021. Seventeen patients were infected by Delta-SARS-CoV-2 and 1 person died during the Pingtung outbreak. The Public Health Bureau of Pingtung County Government stopped the Delta-SARS-CoV-2 outbreak within 1 month through measures such as epidemic investigation, rapid gene sequencing, rapidly expanding isolation, expanded screening of the Delta-SARS-CoV-2 antigen for people who lived in regional villages, and indirect intervention, including rapid vaccination, short lockdown period, and travel restrictions. Indirect environmental factors, such as low levels of air pollution, tropic weather in the summer season, and rural areas might have accelerated the ability to control the Delta-SARS-CoV-2 spread. This successful experience might be recommended as a successful formula for the unvaccinated or insufficiently vaccinated regions.

Cryptococcal Protease(s) and the Activation of SARS-CoV-2 Spike (S) Protein

In this contribution, we report on the possibility that cryptococcal protease(s) could activate the SARS-CoV-2 spike (S) protein. The S protein is documented to have a unique four-amino-acid sequence (underlined, SPRRAR↓S) at the interface between the S1 and S2 sites, that serves as a cleavage site for the human protease, furin. We compared the biochemical efficiency of cryptococcal protease(s) and furin to mediate the proteolytic cleavage of the S1/S2 site in a fluorogenic peptide. We show that cryptococcal protease(s) processes this site in a manner comparable to the efficiency of furin (p > 0.581). We conclude the paper by discussing the impact of these findings in the context of a SARS-CoV-2 disease manifesting while there is an underlying cryptococcal infection.

An IoT-Based COVID-19 Prevention and Control System for Enclosed Spaces

To date, the protracted pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has had widespread ramifications for the economy, politics, public health, etc. Based on the current situation, definitively stopping the spread of the virus is infeasible in many countries. This does not mean that populations should ignore the pandemic; instead, normal life needs to be balanced with disease prevention and control. This paper highlights the use of Internet of Things (IoT) for the prevention and control of coronavirus disease (COVID-19) in enclosed spaces. The proposed booking algorithm is able to control the gathering of crowds in specific regions. K-nearest neighbors (KNN) is utilized for the implementation of a navigation system with a congestion control strategy and global path planning capabilities. Furthermore, a risk assessment model is designed based on a “Sliding Window-Timer” algorithm, providing an infection risk assessment for individuals in potential contact with patients.

Comparison of bacterial filtration efficiency vs. particle filtration efficiency to assess the performance of non-medical face masks

As a result of the current COVID-19 pandemic, the use of facemasks has become commonplace. The performance of medical facemasks is assessed using Bacterial Filtration Efficiency (BFE) tests. However, as BFE tests, require specific expertise and equipment and are time-consuming, the performance of non-medical facemasks is assessed with non-biological Particle Filtration Efficiency (PFE) tests which are comparatively easier to implement. It is necessary to better understand the possible correlations between BFE and PFE to be able to compare the performances of the different types of masks (medical vs. non-medical). In this study BFE results obtained in accordance with the standard EN 14683 are compared to the results of PFE from a reference test protocol defined by AFNOR SPEC S76-001 with the aim to determine if BFE could be predicted from PFE. Our results showed a correlation between PFE and BFE. It was also observed that PFE values were higher than BFE and this was attributed to the difference in particle size distribution considered for efficiency calculation. In order to properly compare these test protocols for a better deduction, it would be interesting to compare the filtration efficiency for a similar granulometric range.

Severe acute respiratory syndrome coronavirus 2 can be detected in exhaled aerosol sampled during a few minutes of breathing or coughing

BACKGROUND

The knowledge on the concentration of viral particles in exhaled breath is limited. The aim of this study was to explore if severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can be detected in aerosol from subjects with the coronavirus disease 2019 (COVID-19) during various types of breathing and coughing and how infection with SARS-CoV-2 may influence the number and size of exhaled aerosol particles.

METHODS

We counted and collected endogenous particles in exhaled breath in subjects with COVID-19 disease by two different impaction-based methods, during 20 normal breaths, 10 airway opening breaths, and three coughs, respectively. Breath samples were analyzed with reverse transcription real-time polymerase chain reaction (RT-PCR).

RESULTS

Detection of RNA in aerosol was possible in 10 out of 25 subjects. Presence of virus RNA in aerosol was mainly found in cough samples (n = 8), but also in airway opening breaths (n = 3) and in normal breaths (n = 4), with no overlap between the methods. No association between viral load in aerosol and number exhaled particles <5 μm was found. Subjects with COVID-19 exhaled less particles than healthy controls during normal breathing and airway opening breaths (all P < 0.05), but not during cough.

CONCLUSION

SARS-CoV-2 RNA can be detected in exhaled aerosol, sampled during a limited number of breathing and coughing procedures. Detection in aerosol seemed independent of viral load in the upper airway swab as well as of the exhaled number of particles. The infectious potential of the amount of virus detected in aerosol needs to be further explored.

Understanding Rhinovirus Circulation and Impact on Illness

Rhinoviruses (RVs) have been reported as one of the main viral causes for severe respiratory illnesses that may require hospitalization, competing with the burden of other respiratory viruses such as influenza and RSV in terms of severity, economic cost, and resource utilization. With three species and 169 subtypes, RV presents the greatest diversity within the Enterovirus genus, and despite the efforts of the research community to identify clinically relevant subtypes to target therapeutic strategies, the role of species and subtype in the clinical outcomes of RV infection remains unclear. This review aims to collect and organize data relevant to RV illness in order to find patterns and links with species and/or subtype, with a specific focus on species and subtype diversity in clinical studies typing of respiratory samples.

Quantifying environmental mitigation of aerosol viral load in a controlled chamber with participants diagnosed with COVID-19

Background

Several studies indicate that COVID-19 is primarily transmitted within indoor spaces. Therefore, environmental characterization of SARS-CoV-2 viral load with respect to human activity, building parameters, and environmental mitigation strategies is critical to combat disease transmission.

Methods

We recruited 11 participants diagnosed with COVID-19 to individually occupy a controlled chamber and conduct specified physical activities under a range of environmental conditions; we collected human and environmental samples over a period of three days for each participant.

Results

Here we show that increased viral load, measured by lower RNA cycle threshold (C_T) values, in nasal samples is associated with higher viral loads in environmental aerosols and on surfaces captured in both the near field (1.2 m) and far field (3.5 m). We also found that aerosol viral load in far field is correlated with the number of particles within the range of 1 µm -2.5 µm. Furthermore, we found that increased ventilation and filtration significantly reduced aerosol and surface viral loads, while higher relative humidity resulted in lower aerosol and higher surface viral load, consistent with an increased rate of particle deposition at higher relative humidity. Data from near field aerosol trials with high expiratory activities suggest that respiratory particles of smaller sizes (0.3 µm -1 µm) best characterize the variance of near field aerosol viral load.

Conclusions

Our findings indicate that building operation practices such as ventilation, filtration, and humidification substantially reduce the environmental aerosol viral load, and therefore inhalation dose, and should be prioritized to improve building health and safety.

Protection from SARS-CoV-2 Delta one year after mRNA-1273 vaccination in rhesus macaques coincides with anamnestic antibody response in the lung

mRNA-1273 vaccine efficacy against SARS-CoV-2 Delta wanes over time; however, there are limited data on the impact of durability of immune responses on protection. Here, we immunized rhesus macaques and assessed immune responses over 1 year in blood and upper and lower airways. Serum neutralizing titers to Delta were 280 and 34 reciprocal ID50 at weeks 6 (peak) and 48 (challenge), respectively. Antibody-binding titers also decreased in bronchoalveolar lavage (BAL). Four days after Delta challenge, the virus was unculturable in BAL, and subgenomic RNA declined by ∼3-log10 compared with control animals. In nasal swabs, sgRNA was reduced by 1-log10, and the virus remained culturable. Anamnestic antibodies (590-fold increased titer) but not T cell responses were detected in BAL by day 4 post-challenge. mRNA-1273-mediated protection in the lungs is durable but delayed and potentially dependent on anamnestic antibody responses. Rapid and sustained protection in upper and lower airways may eventually require a boost.

Rapid evidence review to inform safe return to campus in the context of coronavirus disease 2019 (COVID-19)

Background: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is transmitted predominantly through the air in crowded and unventilated indoor spaces, especially among unvaccinated people. Universities and colleges are potential settings for its spread. Methods: An interdisciplinary team from public health, virology, and biology used narrative methods to summarise and synthesise evidence on key control measures, taking account of mode of transmission. Results: Evidence from a wide range of primary studies supports six measures.  Vaccinate (aim for > 90% coverage and make it easy to get a jab). Require masks indoors, especially in crowded settings. If everyone wears well-fitting cloth masks, source control will be high, but for maximum self-protection, respirator masks should be worn.  Masks should not be removed for speaking or singing. Space people out by physical distancing (but there is no “safe” distance because transmission risk varies with factors such as ventilation, activity levels and crowding), reducing class size (including offering blended learning), and cohorting (students remain in small groups with no cross-mixing). Clean indoor air using engineering controls—ventilation (while monitoring CO2 levels), inbuilt filtration systems, or portable air cleaners fitted with high efficiency particulate air [HEPA] filters). Test asymptomatic staff and students using lateral flow tests, with tracing and isolating infectious cases when incidence of coronavirus disease 2019 (COVID-19) is high. Support clinically vulnerable people to work remotely. There is no direct evidence to support hand sanitising, fomite controls or temperature-taking. There was no evidence that freestanding plastic screens, face visors and electronic air-cleaning systems are effective. Conclusions: The above evidence-based measures should be combined into a multi-faceted strategy to maximise both student safety and the continuation of in-person and online education provision. Those seeking to provide a safe working and learning environment should collect data (e.g. CO2 levels, room occupancy) to inform their efforts.

Evidence of Air and Surface Contamination with SARS-CoV-2 in a Major Hospital in Portugal

As the third wave of the COVID-19 pandemic hit Portugal, it forced the country to reintroduce lockdown measures due to hospitals reaching their full capacities. Under these circumstances, environmental contamination by SARS-CoV-2 in different areas of one of Portugal's major Hospitals was assessed between 21 January and 11 February 2021. Air samples (n = 44) were collected from eleven different areas of the Hospital (four COVID-19 and seven non-COVID-19 areas) using Coriolis® μ and Coriolis® Compact cyclone air sampling devices. Surface sampling was also performed (n = 17) on four areas (one COVID-19 and three non-COVID-19 areas). RNA extraction followed by a one-step RT-qPCR adapted for quantitative purposes were performed. Of the 44 air samples, two were positive for SARS-CoV-2 RNA (6575 copies/m3 and 6662.5 copies/m3, respectively). Of the 17 surface samples, three were positive for SARS-CoV-2 RNA (200.6 copies/cm2, 179.2 copies/cm2, and 201.7 copies/cm2, respectively). SARS-CoV-2 environmental contamination was found both in air and on surfaces in both COVID-19 and non-COVID-19 areas. Moreover, our results suggest that longer collection sessions are needed to detect point contaminations. This reinforces the need to remain cautious at all times, not only when in close contact with infected individuals. Hand hygiene and other standard transmission-prevention guidelines should be continuously followed to avoid nosocomial COVID-19.