High Concentration of Ti3C2Tx MXene in Organic Solvent

MXenes are currently one of the most widely studied two-dimensional materials due to their properties. However, obtaining highly dispersed MXene materials in organic solvent remains a significant challenge for current research. Here, we have developed a method called the tuned microenvironment method (TMM) to prepare a highly concentrated Ti₃C₂T_x organic solvent dispersion by tuning the microenvironment of Ti₃C₂T_x. The as-proposed TMM is a simple and efficient approach, as Ti₃C₂T_x can be dispersed in N,N-dimethylformamide and other solvents by stirring and shaking for a short time, without the need for a sonication step. The delaminated single-layer MXene yield can reach 90% or greater, and a large-scale synthesis has also been demonstrated with TMM by delaminating 30 g of multilayer Ti₃C₂T_x raw powder in a one-pot synthesis. The synthesized Ti₃C₂T_x nanosheets dispersed in an organic solvent possess a clean surface, uniform thickness, and large size. The Ti₃C₂T_x dispersed in an organic solvent exhibits excellent oxidation resistance even under aerobic conditions at room temperature. Through the experimental investigation, the successful preparation of a highly concentrated Ti₃C₂T_x organic solvent dispersion via TMM can be attributed to the following factors: (1) the intercalation of the cation can lead to the change in the hydrophobicity and surface functionalization of the material; (2) proper solvent properties are required in order to disperse MXene nanosheets well. To demonstrate the applicability of the highly concentrated Ti₃C₂T_x organic solvent dispersion, a composite fiber with excellent electrical conductivity is prepared via the wet-spinning of a Ti₃C₂T_x (dispersed in DMF) and polyacrylonitrile mixture. Finally, various types of MXenes, such as Nb₂CT_x, Nb₄C₃T_x, and Mo₂Ti₂C₃T_x, can also be prepared as highly concentrated MXene organic solvent dispersions via TMM, which proves the universality of this method. Thus, it is expected that this work demonstrates promising potential in the research of the MXene material family.

Exploring Heterostructured Upconversion Nanoparticles: From Rational Engineering to Diverse Applications

Upconversion nanoparticles (UCNPs) represent a class of optical nanomaterials that can convert low-energy excitation photons to high-energy fluorescence emissions. On the basis of UCNPs, heterostructured UCNPs, consisting of UCNPs and other functional counterparts (metals, semiconductors, polymers, etc.), present an intriguing system in which the physicochemical properties are largely influenced by the entire assembled particle and also by the morphology, dimension, and composition of each individual component. As multicomponent nanomaterials, heterostructured UCNPs can overcome challenges associated with a single component and exhibit bifunctional or multifunctional properties, which can further expand their applications in bioimaging, biodetection, and phototherapy. In this review, we provide a summary of recent achievements in the field of heterostructured UCNPs in the aspects of construction strategies, synthetic approaches, and types of heterostructured UCNPs. This review also summarizes the trends in biomedical applications of heterostructured UCNPs and discusses the challenges and potential solutions in this field.

Geometric Lessons and Design Strategies for Nanoscale Protein Cages

Protein molecules bring a rich functionality to the field of designed nanoscale architectures. High-symmetry protein cages are rapidly finding diverse applications in biomedicine, nanotechnology, and imaging, but methods for their reliable and predictable construction remain challenging. In this study we introduce an approach for designing protein assemblies that combines ideas and favorable elements adapted from recent work. Cubically symmetric cages can be created by combining two simpler symmetries, following recently established principles. Here, two different oligomeric protein components are brought together in a geometrically specific arrangement by their separate genetic fusion to individual components of a heterodimeric coiled-coil polypeptide motif of known structure. Fusions between components are made by continuous α-helices to limit flexibility. After a computational design, we tested 10 different protein cage constructions experimentally, two of which formed larger assemblies. One produced the intended octahedral cage, ∼26 nm in diameter, while the other appeared to produce the intended tetrahedral cage as a minor component, crystallizing instead in an alternate form representing a collapsed structure of lower stoichiometry and symmetry. Geometric distinctions between the two characterized designs help explain the different degrees of success, leading to clearer principles and improved prospects for the routine creation of nanoscale protein architectures using diverse methods.

Self-Activated Catalytic Sites on Nanoporous Dilute Alloy for High-Efficiency Electrochemical Hydrogen Evolution

Design and synthesis of effective electrocatalysts for hydrogen evolution reaction (HER) in wide pH environments are critical to reduce energy losses in water electrolyzers. Here, by using a self-activation strategy, we construct an atomic nickel (Ni) decorated nanoporous iridium (Ir) catalyst, which can create the reaction-favorable chemical environment and maximize the electrochemical active surface area (ECSA), enabling efficient HER over a wide pH range. By using operando X-ray absorption spectroscopy and theoretical calculations, the atomic Ni sites are identified as the synergistic sites, which not only accelerate the water dissociation under operation conditions but also activate the surface Ir sites thus leading to the efficient H₂ generation. This work highlights the significance of atomic-level decorating strategy which can optimize the activity of surface Ir atoms with negligible sacrifice of the ECSA.

Modular Imaging Scaffold for Single-Particle Electron Microscopy

Technological breakthroughs in electron microscopy (EM) have made it possible to solve structures of biological macromolecular complexes and to raise novel challenges, specifically related to sample preparation and heterogeneous macromolecular assemblies such as DNA-protein, protein-protein, and membrane protein assemblies. Here, we built a V-shaped DNA origami as a scaffolding molecular system to template proteins at user-defined positions in space. This template positions macromolecular assemblies of various sizes, juxtaposes combinations of biomolecules into complex arrangements, isolates biomolecules in their active state, and stabilizes membrane proteins in solution. In addition, the design can be engineered to tune DNA mechanical properties by exerting a controlled piconewton (pN) force on the molecular system and thus adapted to characterize mechanosensitive proteins. The binding site can also be specifically customized to accommodate the protein of interest, either interacting spontaneously with DNA or through directed chemical conjugation, increasing the range of potential targets for single-particle EM investigation. We assessed the applicability for five different proteins. Finally, as a proof of principle, we used RNAP protein to validate the approach and to explore the compatibility of the template with cryo-EM sample preparation.

Influence of Shape Anisotropy on the Emission of Low-Dimensional Semiconductors

The emergence of precise and scalable synthetic methods for producing anisotropic semiconductor nanostructures provides opportunities to tune the photophysical properties of these particles beyond their band gaps, and to incorporate them into higher-order structures with macroscopic anisotropic responses to electric and optical fields. This perspective article discusses some of these opportunities in the context of colloidal semiconductor nanoplatelets, with a focus on the influence of confinement anisotropy on processes that dictate the emission.

The Neuroscience Community Has a Role in Environmental Conservation

We previously argued that the neuroscience community has a role in environmental conservation because protection of biodiversity and the specialized behavioral adaptions of animals is essential to understanding brain structure and function. Preserving biodiversity and the natural world is also linked to human mental health and broadens our insight on the origins of psychiatric disorders like stress, anxiety, and depression. The study of neuroscience has become a global scientific pursuit that involves thousands of researchers and has an economic impact in the billions of dollars. As a group of biomedical research scientists, neuroscientists have the knowledge base and public credibility to convincingly promote sustainable environmental actions and policies. Here, we outline several key areas in which we as a neuroscience academic community can participate to preserve a rich global biodiversity and confront the environmental crises that lie before us.

Biofabrication of Gold Nanotriangles Using Liposomes as a Dual Functional Reductant and Stabilizer

Negatively charged liposomes accomplished both functions as a reducing and stabilizing agent in the synthesis of gold nanotriangles (GNTs). Liposomes are based on a mixture of phospholipids phosphatidylcholine/phosphoglycerol, and they were used as a template phase to perform the GNTs. The method was evaluated under different conditions such as temperature, reaction time, phosphoglycerol chain length, and precursor concentration. Isotropic and anisotropic gold nanoparticles are formed simultaneously during the synthesis. Therefore, by combining centrifugation and depletion flocculation strategies, the sample was concentrated in terms of GNTs from 15% crude to 80% by using sodium dodecyl sulfate (SDS). As a result, a green colored dispersion was obtained containing highly purified, well-defined, negatively charged GNTs, where the edge length of most particles is centered in the range of 60-80 nm with an average thickness of 7.8 ± 0.1 nm. By this purification process, it was possible to highly increase the yield in terms of GNTs. Other surfactants [cetyltrimethylammonium chloride (CTAC), hexadecyltrimethylammonium bromide (CTAB), Tween 20, and dodecyldimethylammonium bromide] were evaluated during the purification stage, and both CTAB and CTAC show similar results to those obtained by using SDS. These GNTs are potential candidates for future applications in molecular imaging, photothermal therapy, drug delivery, biosensing, and photodynamic therapy.

High chlorine evolution performance of electrochemically reduced TiO2 nanotube array coated with a thin RuO2 layer by the self-synthetic method

Recently, reduced TiO2 nanotube arrays via electrochemical self-doping (r-TiO2) are emerging as a good alternative to conventional dimensionally stable anodes (DSAs) due to their comparable performance and low-cost. However, compared with conventional DSAs, they suffer from poor stability, low current efficiency, and high energy consumption. Therefore, this study aims to advance the electrochemical performances in the chlorine evolution of r-TiO2 with a thin RuO2 layer coating on the nanotube structure (RuO2@r-TiO2). The RuO2 thin layer was successfully coated on the surface of r-TiO2. This was accomplished with a self-synthesized layer of ruthenium precursor originating from a spontaneous redox reaction between Ti3+ and metal ions on the r-TiO2 surface and thermal treatment. The thickness of the thin RuO2 layer was approximately 30 nm on the nanotube surface of RuO2@r-TiO2 without severe pore blocking. In chlorine production, RuO2@r-TiO2 exhibited higher current efficiency (∼81.0%) and lower energy consumption (∼3.0 W h g-1) than the r-TiO2 (current efficiency of ∼64.7% of and energy consumption of ∼5.2 W h g-1). In addition, the stability (ca. 22 h) was around 20-fold enhancement in RuO2@r-TiO2 compared with r-TiO2 (ca. 1.2 h). The results suggest a new route to provide a thin layer coating on r-TiO2 and to synthesize a high performance oxidant-generating anode.

Nanotechnology assisted photo- and sonodynamic therapy for overcoming drug resistance

Drug resistance is considered the most important reason for the clinical failure of cancer chemotherapy. Circumventing drug resistance and improving the efficacy of anticancer agents remains a major challenge. Over the past several decades, photodynamic therapy (PDT) and sonodynamic therapy (SDT) have attracted substantial attention for their efficacy in cancer treatment, and have been combined with chemotherapy to overcome drug resistance. However, simultaneously delivering sensitizers and chemotherapy drugs to same tumor cell remains challenging, thus greatly limiting this combinational therapy. The rapid development of nanotechnology provides a new approach to solve this problem. Nano-based drug delivery systems can not only improve the targeted delivery of agents but also co-deliver multiple drug components in single nanoparticles to achieve optimal synergistic effects. In this review, we briefly summarize the mechanisms of drug resistance, discuss the advantages and disadvantages of PDT and SDT in reversing drug resistance, and describe state-of-the-art research using nano-mediated PDT and SDT to solve these refractory problems. This review also highlights the clinical translational potential for this combinational therapy.

A Potent Cancer Vaccine Adjuvant System for Particleization of Short, Synthetic CD8+ T Cell Epitopes

Short major histocompatibility complex (MHC) class I (MHC-I)-restricted peptides contain the minimal biochemical information to induce antigen (Ag)-specific CD8⁺ cytotoxic T cell responses but are generally ineffective in doing so. To address this, we developed a cobalt-porphyrin (CoPoP) liposome vaccine adjuvant system that induces rapid particleization of conventional, short synthetic MHC-I epitopes, leading to strong cellular immune responses at nanogram dosing. Along with CoPoP (to induce particle formation of peptides), synthetic monophosphoryl lipid A (PHAD) and QS-21 immunostimulatory molecules were included in the liposome bilayer to generate the "CPQ" adjuvant system. In mice, immunization with a short MHC-I-restricted peptide, derived from glycoprotein 70 (gp70), admixed with CPQ safely generated functional, Ag-specific CD8⁺ T cells, resulting in the rejection of multiple tumor cell lines, with durable immunity. When cobalt was omitted, the otherwise identical peptide and adjuvant components did not result in peptide binding and were incapable of inducing immune responses, demonstrating the importance of stable particle formation. Immunization with the liposomal vaccine was well-tolerated and could control local and metastatic disease in a therapeutic setting. Mechanistic studies showed that particle-based peptides were better taken up by antigen-presenting cells, where they were putatively released within endosomes and phagosomes for display on MHC-I surfaces. On the basis of the potency of the approach, the platform was demonstrated as a tool for in vivo epitope screening of peptide microlibraries comprising a hundred peptides.

Synthesis of Escherichia coli OmpA Oral Nanoparticles and Evaluation of Immune Functions against the Major Etiologic Agent of Cow Mastitis

Escherichia coli is a major etiologic agent of cow mastitis, a condition that results in huge economic losses. There is a lack of an oral vaccine for cow mastitis. Previous studies have confirmed that the outer membrane protein A (OmpA) of E. coli is immunogenic and can be used for vaccine design. In the present study, OmpA was encapsulated into nanoparticles (NP-OmpA) for an oral vaccine for cow mastitis. Methods: OmpA was purified with Ni-NTA flow resin and encapsulated with chitosan (CS) to prepare NP-OmpA nanoparticles. The gastrointestinal tract was simulated in vitro (PBS, pH 1.2) to measure the protein release rate. The optimal preparation conditions for NP-OmpA were determined by analyzing the concentrations of OmpA and CS, magnetic mixing speed, mixing time, and the ratio of tripolyphosphate (TPP)/CS (w/w). NP-OmpA safety was assessed by function factors and histopathological examination of livers and kidneys. The immune activity of NP-OmpA was determined using qRT-PCR to assess immune-related gene expression, leukocyte phagocytosis of Staphylococcus aureus, ELISA to evaluate antiserum titer and immune recognition of E. coli, and the organ index. The immune protection function of NP-OmpA was assessed by the protection rate of NP-OmpA to E. coli in mice, qRT-PCR for inflammation-related gene expression, assay kits for antioxidant factors, and visceral injury in the histopathological sections. Results: NP-OmpA nanoparticles had a diameter of about 700 nm, loading efficiency (LE) of 79.27%, and loading capacity (LC) of 20.31%. The release rate of NP-OmpA (0~96 h) was less than 50% in vitro. The optimal preparation conditions for NP-OmpAs were OmpA protein concentration of 2 mg/mL, CS concentration of 5 mg/mL, TPP/CS (w/w) of 1:1, magnetic mixing speed of 150 r/min, and mixing time of 15 min. Histopathological sections and clinical analytes of uric acid (UA), creatinine (Cr), alanine aminotransferase (ALT), aspartate transaminase (AST), catalase (CAT), glutathione (GSH), and malondialdehyde (MDA) showed NP-OmpA did not damage mice livers or kidneys. NP-OmpA could enhance the immune-related gene expression of IFN-γ and HSP70 in the spleen, liver, and kidney and the leukocyte phagocytosis of S. aureus. The antiserum titer (1:3200) was obtained from mice immunized with NP-OmpA, which had an immune recognition effect to E. coli. The immune protection rate of NP-OmpA was 71.43% (p < 0.05) to E. coli. NP-OmpA could down-regulate the inflammation-related gene expression of TNF-a, IL-6, and IL-10 in the spleen, liver, and kidney, and the antioxidant factors MDA and SOD in the liver, and reduce injury in the liver and kidney of mice induced by E. coli. Conclusions: A novel NP-OmpA nanoparticle was encapsulated, and the optimal preparation conditions were determined. The NP-OmpA was safe and had good immune functions. They are expected to induce a response that resists infection with the major etiologic agent (E. coli) of cow mastitis.

Promoting a Weak Coupling of Monolayer MoSe2 Grown on (100)-Faceted Au Foil

As a two-dimensional semiconductor with many physical properties, including, notably, layer-controlled electronic bandgap and coupled spin-valley degree of freedom, monolayer MoSe₂ is a strong candidate material for next-generation opto- and valley-electronic devices. However, due to substrate effects such as lattice mismatch and dielectric screening, preserving the monolayer's intrinsic properties remains challenging. This issue is generally significant for metallic substrates whose active surfaces are commonly utilized to achieve direct chemical or physical vapor growth of the monolayer films. Here, we demonstrate high-temperature-annealed Au foil with well-defined (100) facets as a weakly interacting substrate for atmospheric pressure chemical vapor deposition of highly crystalline monolayer MoSe₂. Low-temperature scanning tunneling microscopy/spectroscopy measurements reveal a honeycomb structure of MoSe₂ with a quasi-particle bandgap of 1.96 eV, a value comparable with other weakly interacting systems such as MoSe₂/graphite. Density functional theory calculations indicate that the Au(100) surface exhibits the preferred energetics to electronically decouple from MoSe₂, compared with the (110) and (111) crystal planes. This weak coupling is critical for the easy transfer of monolayers to another host substrate. Our study demonstrates a practical means to produce high-quality monolayers of transition-metal dichalcogenides, viable for both fundamental and application studies.

The Origin of the Sheet Size Predicament in Graphene Macroscopic Papers

The larger size of graphene sheets should intuitively generate higher overall properties of their macroscopic materials. However, this intuitive notion still remains ambiguous. Here, we uncover that the wrinkle formation causes the counterintuitive size predicament of graphene sheets in their macroscopic materials. In the model of graphene oxide assembled papers, we reveal that the giant size of graphene oxide sheets aggravates the formation of larger wrinkles and more microvoids, causing the negative size effect in mechanical strength. A major microscopic origin of the size predicament is the skin wrinkling in the drying process, and the wrinkling behavior follows a general rule of deformation of an elastic thin plate. We use a wrinkle-engineering strategy to depress the spontaneously formed large wrinkles and succeed in the resolution of the size predicament. After wrinkle modulation, an authentically positive size effect reversely appears in which giant graphene sheets generate ultrahigh mechanical strength and superior functionalities of graphene papers. The origin of the size predicament reminds us of the hidden importance of modulating wrinkles for graphene macroscopic materials and provides a guidance of wrinkle engineering for graphene materials with advanced performances.

On the synthesis of bi-magnetic manganese ferrite-based core-shell nanoparticles

Multifunctional nano-heterostructures (NHSs) with controlled morphology are cardinal in many applications, but the understanding of the nanoscale colloidal chemistry is yet to be fulfilled. The stability of the involved crystalline phases in different solvents at mid- and high-temperatures and reaction kinetics considerably affect the nucleation and growth of the materials and their final architecture. The formation mechanism of manganese ferrite-based core-shell NHSs is herein investigated. The effects of the core size (8, 10, and 11 nm), the shell nature (cobalt ferrite and spinel iron oxide) and the polarity of the solvent (toluene and octanol) on the dissolution phenomena of manganese ferrite are also studied. Noteworthily, the combined use of bulk (powder X-ray diffraction, 57Fe Mössbauer spectroscopy, and DC magnetometry) and nanoscale techniques (HRTEM and STEM-EDX) provides new insights into the manganese ferrite dissolution phenomena, the colloidal stability in an organic environment, and the critical size below which dissolution is complete. Moreover, the dissolved manganese and iron ions react further, leading to an inverted core-shell in the mother liquor solution, paving the way to novel synthetic pathways in nanocrystal design. The MnFe2O4@CoFe2O4 core-shell heterostructures were also employed as heat mediators, exploiting the magnetic coupling between a hard (CoFe2O4) and a soft phase (MnFe2O4).

Ultrasensitive 3D Aerosol-Jet-Printed Perovskite X-ray Photodetector

X-ray photon detection is important for a wide range of applications. The highest demand, however, comes from medical imaging, which requires cost-effective, high-resolution detectors operating at low-photon flux, therefore stimulating the search for novel materials and new approaches. Recently, hybrid halide perovskite CH₃NH₃PbI₃ (MAPbI₃) has attracted considerable attention due to its advantageous optoelectronic properties and low fabrication costs. The presence of heavy atoms, providing a high scattering cross-section for photons, makes this material a perfect candidate for X-ray detection. Despite the already-successful demonstrations of efficiency in detection, its integration into standard microelectronics fabrication processes is still pending. Here, we demonstrate a promising method for building X-ray detector units by 3D aerosol jet printing with a record sensitivity of 2.2 × 10⁸ μC Gy_air^-1 cm^-2 when detecting 8 keV photons at dose rates below 1 μGy/s (detection limit 0.12 μGy/s), a 4-fold improvement on the best-in-class devices. An introduction of MAPbI₃-based detection into medical imaging would significantly reduce health hazards related to the strongly ionizing X-rays' photons.

Strongly Quantum-Confined Blue-Emitting Excitons in Chemically Configurable Multiquantum Wells

Light matter interactions are greatly enhanced in two-dimensional (2D) semiconductors because of strong excitonic effects. Many optoelectronic applications would benefit from creating stacks of atomically thin 2D semiconductors separated by insulating barrier layers, forming multiquantum-well structures. However, most 2D transition metal chalcogenide systems require serial stacking to create van der Waals multilayers. Hybrid metal organic chalcogenolates (MOChas) are self-assembling hybrid materials that combine multiquantum-well properties with scalable chemical synthesis and air stability. In this work, we use spatially resolved linear and nonlinear optical spectroscopies over a range of temperatures to study the strongly excitonic optical properties of mithrene, that is, silver benzeneselenolate, and its synthetic isostructures. We experimentally probe s-type bright excitons and p-type excitonic dark states formed in the quantum confined 2D inorganic monolayers of silver selenide with exciton binding energy up to ∼0.4 eV, matching recent theoretical predictions of the material class. We further show that mithrene's highly efficient blue photoluminescence, ultrafast exciton radiative dynamics, as well as flexible tunability of molecular structure and optical properties demonstrate great potential of MOChas for constructing optoelectronic and quantum excitonic devices.

Atomic-Layer Controlled Interfacial Band Engineering at Two-Dimensional Layered PtSe2/Si Heterojunctions for Efficient Photoelectrochemical Hydrogen Production

Platinum diselenide (PtSe₂) is a group-10 two-dimensional (2D) transition metal dichalcogenide that exhibits the most prominent atomic-layer-dependent electronic behavior of "semiconductor-to-semimetal" transition when going from monolayer to bulk form. This work demonstrates an efficient photoelectrochemical (PEC) conversion for direct solar-to-hydrogen (H₂) production based on 2D layered PtSe₂/Si heterojunction photocathodes. By systematically controlling the number of atomic layers of wafer-scale 2D PtSe₂ films through chemical vapor deposition (CVD), the interfacial band alignments at the 2D layered PtSe₂/Si heterojunctions can be appropriately engineered. The 2D PtSe₂/p-Si heterojunction photocathode consisting of a PtSe₂ thin film with a thickness of 2.2 nm (or 3 atomic layers) exhibits the optimized band alignment and delivers the best PEC performance for hydrogen production with a photocurrent density of -32.4 mA cm^-2 at 0 V and an onset potential of 1 mA cm^-2 at 0.29 V versus a reversible hydrogen electrode (RHE) after post-treatment. The wafer-scale atomic-layer controlled band engineering of 2D PtSe₂ thin-film catalysts integrated with the Si light absorber provides an effective way in the renewable energy application for direct solar-to-hydrogen production.

Nanotechnology in Wastewater Management: A New Paradigm Towards Wastewater Treatment

Clean and safe water is a fundamental human need for multi-faceted development of society and a thriving economy. Brisk rises in populations, expanding industrialization, urbanization and extensive agriculture practices have resulted in the generation of wastewater which have not only made the water dirty or polluted, but also deadly. Millions of people die every year due to diseases communicated through consumption of water contaminated by deleterious pathogens. Although various methods for wastewater treatment have been explored in the last few decades but their use is restrained by many limitations including use of chemicals, formation of disinfection by-products (DBPs), time consumption and expensiveness. Nanotechnology, manipulation of matter at a molecular or an atomic level to craft new structures, devices and systems having superior electronic, optical, magnetic, conductive and mechanical properties, is emerging as a promising technology, which has demonstrated remarkable feats in various fields including wastewater treatment. Nanomaterials encompass a high surface to volume ratio, a high sensitivity and reactivity, a high adsorption capacity, and ease of functionalization which makes them suitable for application in wastewater treatment. In this article we have reviewed the techniques being developed for wastewater treatment using nanotechnology based on adsorption and biosorption, nanofiltration, photocatalysis, disinfection and sensing technology. Furthermore, this review also highlights the fate of the nanomaterials in wastewater treatment as well as risks associated with their use.

The Protein Corona Leads to Deformation of Spherical Micelles

The formation of a non-specific protein corona around nanoparticles (NPs) has been identified as one of the culprits for failed nanomedicine. The amount and type of adsorbed protein from the blood plasma are known to determine the fate of NPs and the accessibility of targeting ligands. Herein, we show that the adsorbed protein may not only enlarge the NPs and change their surface properties but also, in the case of soft NPs such as polymer micelles, lead to deformation. Poly(1-O-methacryloyl -β-D-fructopyranose)-b-poly(methylmethacrylate) (P(1-O-MAFru)-b-PMMA) block co-polymers were self-assembled into NPs with a spherical core-shell morphology as determined by small angle neutron scattering (SANS). Upon incubation with albumin, TEM, SANS, and small angle X-ray scattering (SAXS) revealed the adsorption of albumin and deformation of the NPs with a spheroid geometry. Removal of the protein led to the reversal of the morphology back to the spherical core-shell structure. Structural studies and cell studies of uptake of the NPs imply that the observed deformation may influence blood circulation time and cell uptake.

Two-Dimensional Cold Electron Transport for Steep-Slope Transistors

Room-temperature Fermi-Dirac electron thermal excitation in conventional three-dimensional (3D) or two-dimensional (2D) semiconductors generates hot electrons with a relatively long thermal tail in energy distribution. These hot electrons set a fundamental obstacle known as the "Boltzmann tyranny" that limits the subthreshold swing (SS) and therefore the minimum power consumption of 3D and 2D field-effect transistors (FETs). Here, we investigated a graphene (Gr)-enabled cold electron injection where the Gr acts as the Dirac source to provide the cold electrons with a localized electron density distribution and a short thermal tail at room temperature. These cold electrons correspond to an electronic refrigeration effect with an effective electron temperature of ∼145 K in the monolayer MoS₂, which enables the transport factor lowering and thus the steep-slope switching (across for three decades with a minimum SS of 29 mV/decade at room temperature) for a monolayer MoS₂ FET. Especially, a record-high sub-60-mV/decade current density (over 1 μA/μm) can be achieved compared to conventional steep-slope technologies such as tunneling FETs or negative capacitance FETs using 2D or 3D channel materials. Our work demonstrates the potential of a 2D Dirac-source cold electron transistor as a steep-slope transistor concept for future energy-efficient nanoelectronics.

Predictions of moiré excitons in twisted two-dimensional organic-inorganic halide perovskites

Recent breakthrough in synthesizing arbitrary vertical heterostructures of Ruddlesden–Popper (RP) perovskites opens doors to myriad quantum optoelectronic applications. However, it is not clear whether moiré excitons and flat bands can be formed in such heterostructures. Here, we predict from first principles that twisted homobilayers of RP perovskite, MA₂PbI₄, can host moiré excitons and yield flat energy bands. The moiré excitons exhibit unique and hybridized characteristics with electrons confined in a single layer of a striped distribution while holes localized in both layers. Nearly flat valence bands can be formed in the bilayers with relatively large twist angles, thanks to the presence of hydrogen bonds that strengthen the interlayer coupling. External pressures can further increase the interlayer coupling, yielding more localized moiré excitons and flatter valence bands. Finally, electrostatic gating is predicted to tune the degree of hybridization, energy, position and localization of moiré excitons in twisted MA₂PbI₄ bilayers.

Excitonic states in twisted MA₂PbI₄ bilayers were calculated by first-principles calculations.

Hybridized Defects in Solid-State Materials as Artificial Molecules

Two-dimensional materials can be crafted with structural precision approaching the atomic scale, enabling quantum defects-by-design. These defects are frequently described as "artificial atoms" and are emerging optically addressable spin qubits. However, interactions and coupling of such artificial atoms with each other, in the presence of the lattice, warrants further investigation. Here we present the formation of "artificial molecules" in solids, introducing a chemical degree of freedom in control of quantum optoelectronic materials. Specifically, in monolayer hexagonal boron nitride as our model system, we observe configuration- and distance-dependent dissociation curves and hybridization of defect orbitals within the bandgap into bonding and antibonding orbitals, with splitting energies ranging from ∼10 meV to nearly 1 eV. We calculate the energetics of cis and trans out-of-plane defect pairs CH_B-CH_B against an in-plane defect pair C_B-C_B and find that in-plane defect pair interacts more strongly than out-of-plane pairs. We demonstrate an application of this chemical degree of freedom by varying the distance between C_B and V_N of C_BV_N and observe changes in the predicted peak absorption wavelength from the visible to the near-infrared spectral band. We envision leveraging this chemical degree of freedom of defect complexes to precisely control and tune defect properties toward engineering robust quantum memories and quantum emitters for quantum information science.

Inverse Evolution of Helicity from the Molecular to the Macroscopic Level Based on N-Terminal Aromatic Amino Acids

Precise control of the emergence of macroscopic helicity with specific handedness is promising in rationally designing chiral nanomaterials, but it is rather challenging. Herein, we present a protocol to address the transmission of helicity at a molecularly resolved level to a macroscopically resolved level, in which process supramolecular chirality undergoes an inversion. A series of N-terminal aromatic amino acids could self-assemble in water, enabling the occurrence of helicity at the molecularly resolved scale, evidenced by the single crystal structure and chiroptical responses. While it failed to transmit the helicity to the macroscopic scale for individual self-assembly, the coassembly with small organic binder through hydrogen bonding interactions allows for the emergence of helical structures at the nano/micrometer scale. Experimental and theoretical results demonstrate that the introduction of extra hydrogen bonds enables a moderate crystallinity of coassemblies with remaining one-dimensional orientation to enhance the helical growth. The transmission of helicity to higher levels by coassembly is accompanied by the helicity inversion, resulting from the exchange of hydrogen bonds. This study presents a rational protocol to precisely control the emergence of macroscopic helicity from molecularly resolved helicity with finely tailored handedness, providing a deeper understanding of the chirality origin in the assembled systems in order to facilitate the design and construction of functional chiral nanomaterials.

Synthesis of Large-Scale Monolayer 1T'-MoTe2 and Its Stabilization via Scalable hBN Encapsulation

Out of the different structural phases of molybdenum ditelluride (MoTe2), the distorted octahedral 1T' possesses great interest for fundamental physics and is a promising candidate for the implementation of innovative devices such as topological transistors. Indeed, 1T'-MoTe2 is a semimetal with superconductivity, which has been predicted to be a Weyl semimetal and a quantum spin Hall insulator in bulk and monolayer form, respectively. Large instability of monolayer 1T'-MoTe2 in environmental conditions, however, has made its investigation extremely challenging so far. In this work, we demonstrate homogeneous growth of large single-crystal (up to 500 μm) monolayer 1T'-MoTe2 via chemical vapor deposition (CVD) and its stabilization in air with a scalable encapsulation approach. The encapsulant is obtained by electrochemically delaminating CVD hexagonal boron nitride (hBN) from copper foil, and it is applied on the freshly grown 1T'-MoTe2 via a top-down dry lamination step. The structural and electrical properties of encapsulated 1T'-MoTe2 have been monitored over several months to assess the degree of degradation of the material. We find that when encapsulated with hBN, the lifetime of monolayer 1T'-MoTe2 successfully increases from a few minutes to more than a month. Furthermore, the encapsulated monolayer can be subjected to transfer, device processing, and heating and cooling cycles without degradation of its properties. The potential of this scalable heterostack is confirmed by the observation of signatures of low-temperature phase transition in monolayer 1T'-MoTe2 by both Raman spectroscopy and electrical measurements. The growth and encapsulation methods reported in this work can be employed for further fundamental studies of this enticing material as well as facilitate the technological development of monolayer 1T'-MoTe2.

Nanomedicine to modulate immunotherapy in cutaneous melanoma (Review)

Cancer immunotherapy has shifted the paradigm in cancer treatment in recent years. Immune checkpoint blockage (ICB), the active cancer vaccination and chimeric antigen receptor (CAR) for T-cell-based adoptive cell transfer represent the main developments, achieving a surprising increased survival in patients included in clinical trials. In spite of these results, the current state-of-the-art immunotherapy has its limitations in efficacy. The existence of an interdisciplinary interface involving current knowledge in biology, immunology, bioengineering and materials science represents important progress in increasing the effectiveness of immunotherapy in cancer. Cutaneous melanoma remains a difficult cancer to treat, in which immunotherapy is a major therapeutic option. In fact, enhancing immunotherapy is possible using sophisticated biomedical nanotechnology platforms of organic or inorganic materials or engineering various immune cells to enhance the immune system. In addition, biological devices have developed, changing the approach to and treatment results in melanoma. In this review, we present different modalities to modulate the immune system, as well as opportunities and challenges in melanoma treatment.

Covalent organic framework nanofluidic membrane as a platform for highly sensitive bionic thermosensation

Thermal sensation, which is the conversion of a temperature stimulus into a biological response, is the basis of the fundamental physiological processes that occur ubiquitously in all organisms from bacteria to mammals. Significant efforts have been devoted to fabricating artificial membranes that can mimic the delicate functions of nature; however, the design of a bionic thermometer remains in its infancy. Herein, we report a nanofluidic membrane based on an ionic covalent organic framework (COF) that is capable of intelligently monitoring temperature variations and expressing it in the form of continuous potential differences. The high density of the charged sites present in the sub-nanochannels renders superior permselectivity to the resulting nanofluidic system, leading to a high thermosensation sensitivity of 1.27 mV K⁻¹, thereby outperforming any known natural system. The potential applicability of the developed system is illustrated by its excellent tolerance toward a broad range of salt concentrations, wide working temperatures, synchronous response to temperature stimulation, and long-term ultrastability. Therefore, our study pioneers a way to explore COFs for mimicking the sophisticated signaling system observed in the nature.

Efforts have been devoted to fabricating artificial membranes that can mimic biological functions but the design of a bionic thermometer remains in its infancy. Herein, the authors report a nanofluidic membrane based on an ionic covalent organic framework capable of monitoring temperature variations and expressing it in the form of continuous potential differences.

Direct Optoelectronic Imaging of 2D Semiconductor-3D Metal Buried Interfaces

The semiconductor-metal junction is one of the most critical factors for high-performance electronic devices. In two-dimensional (2D) semiconductor devices, minimizing the voltage drop at this junction is particularly challenging and important. Despite numerous studies concerning contact resistance in 2D semiconductors, the exact nature of the buried interface under a three-dimensional (3D) metal remains unclear. Herein, we report the direct measurement of electrical and optical responses of 2D semiconductor-metal buried interfaces using a recently developed metal-assisted transfer technique to expose the buried interface, which is then directly investigated using scanning probe techniques. We characterize the spatially varying electronic and optical properties of this buried interface with <20 nm resolution. To be specific, potential, conductance, and photoluminescence at the buried metal/MoS₂ interface are correlated as a function of a variety of metal deposition conditions as well as the type of metal contacts. We observe that direct evaporation of Au on MoS₂ induces a large strain of ∼5% in the MoS₂ which, coupled with charge transfer, leads to degenerate doping of the MoS₂ underneath the contact. These factors lead to improvement of contact resistance to record values of 138 kΩ μm, as measured using local conductance probes. This approach was adopted to characterize MoS₂-In/Au alloy interfaces, demonstrating contact resistance as low as 63 kΩ μm. Our results highlight that the MoS₂/metal interface is sensitive to device fabrication methods and provide a universal strategy to characterize buried contact interfaces involving 2D semiconductors.

Characterization of design grammar of peptides for regulating liquid droplets and aggregates of FUS

Liquid droplets of aggregation-prone proteins, which become hydrogels or form amyloid fibrils, are a potential target for drug discovery. In this study, we proposed an experiment-guided protocol for characterizing the design grammar of peptides that can regulate droplet formation and aggregation. The protocol essentially involves investigation of 19 amino acid additives and polymerization of the identified amino acids. As a proof of concept, we applied this protocol to fused in sarcoma (FUS). First, we evaluated 19 amino acid additives for an FUS solution and identified Arg and Tyr as suppressors of droplet formation. Molecular dynamics simulations suggested that the Arg additive interacts with specific residues of FUS, thereby inhibiting the cation-π and electrostatic interactions between the FUS molecules. Second, we observed that Arg polymers promote FUS droplet formation, unlike Arg monomers, by bridging the FUS molecules. Third, we found that the Arg additive suppressed solid aggregate formation of FUS, while Arg polymer enhanced it. Finally, we observed that amyloid-forming peptides induced the conversion of FUS droplets to solid aggregates of FUS. The developed protocol could be used for the primary design of peptides controlling liquid droplets and aggregates of proteins.

Ultraflat Sub-10 Nanometer Gap Electrodes for Two-Dimensional Optoelectronic Devices

Two-dimensional (2D) materials are promising candidates for building ultrashort-channel devices because their thickness can be reduced down to a single atomic layer. Here, we demonstrate an ultraflat nanogap platform based on atomic layer deposition (ALD) and utilize the structure to fabricate 2D material-based optical and electronic devices. In our method, ultraflat metal surfaces, template-stripped from a Si wafer mold, are separated by an Al₂O₃ ALD layer down to a gap width of 10 nm. Surfaces of both electrodes are vertically aligned without a height difference, and each electrode is ultraflat with a measured root-mean-square roughness as low as 0.315 nm, smaller than the thickness of monolayer graphene. Simply by placing 2D material flakes on top of the platform, short-channel field-effect transistors based on black phosphorus and MoS₂ are fabricated, exhibiting their typical transistor characteristics. Furthermore, we use the same platform to demonstrate photodetectors with a nanoscale photosensitive channel, exhibiting higher photosensitivity compared to microscale gap channels. Our wafer-scale atomic layer lithography method can benefit a diverse range of 2D optical and electronic applications.

[2π + 2π] Photocycloaddition of Enones to Single-Walled Carbon Nanotubes Creates Fluorescent Quantum Defects

Single-walled carbon nanotubes (SWCNTs) have been widely applied in biomedical fields such as drug delivery, biosensing, bioimaging, and tissue engineering. Understanding their reactivity with biomolecules is important for these applications. We describe here a photoinduced cycloaddition reaction between enones and SWCNTs. By creating covalent and tunable sp³ defects in the sp² carbon lattice of SWCNTs through [2π + 2π] photocycloaddition, a bright red-shifted photoluminescence was gradually generated. The photocycloaddition functionalization was demonstrated with various organic molecules bearing an enone functional group, including biologically important oxygenated lipid metabolites. The mechanism of this reaction was studied empirically and using computational methods. Density functional theory calculations were employed to elucidate the identity of the reaction product and understand the origin of different substrate reactivities. The results of this study can enable engineering of the optical and electronic properties of semiconducting SWCNTs and provide understanding into their interactions with the lipid biocorona.

DNA Nanostructures: Current Challenges and Opportunities for Cellular Delivery

DNA nanotechnology has produced a wide range of self-assembled structures, offering unmatched possibilities in terms of structural design. Because of their programmable assembly and precise control of size, shape, and function, DNA particles can be used for numerous biological applications, including imaging, sensing, and drug delivery. While the biocompatibility, programmability, and ease of synthesis of nucleic acids have rapidly made them attractive building blocks, many challenges remain to be addressed before using them in biological conditions. Enzymatic hydrolysis, low cellular uptake, immune cell recognition and degradation, and unclear biodistribution profiles are yet to be solved. Rigorous methodologies are needed to study, understand, and control the fate of self-assembled DNA structures in physiological conditions. In this review, we describe the current challenges faced by the field as well as recent successes, highlighting the potential to solve biology problems or develop smart drug delivery tools. We then propose an outlook to drive the translation of DNA constructs toward preclinical design. We particularly believe that a detailed understanding of the fate of DNA nanostructures within living organisms, achieved through thorough characterization, is the next required step to reach clinical maturity.

Lipid Oxidation Induced by RF Waves and Mediated by Ferritin Iron Causes Activation of Ferritin-Tagged Ion Channels

One approach to magnetogenetics uses radiofrequency (RF) waves to activate transient receptor potential channels (TRPV1 and TRPV4) that are coupled to cellular ferritins. The mechanisms underlying this effect are unclear and controversial. Theoretical calculations suggest that the heat produced by RF fields is likely orders of magnitude weaker than needed for channel activation. Using the FeRIC (Ferritin iron Redistribution to Ion Channels) system, we have uncovered a mechanism of activation of ferritin-tagged channels via a biochemical pathway initiated by RF disturbance of ferritin and mediated by ferritin-associated iron. We show that, in cells expressing TRPV^FeRIC channels, RF increases the levels of the labile iron pool in a ferritin-dependent manner. Free iron participates in chemical reactions, producing reactive oxygen species and oxidized lipids that ultimately activate the TRPV^FeRIC channels. This biochemical pathway predicts a similar RF-induced activation of other lipid-sensitive TRP channels and may guide future magnetogenetic designs.

Ultrafast, One-Step, Salt-Solution-Based Acoustic Synthesis of Ti3C2 MXene

The current quest for two-dimensional transition metal carbides and nitrides (MXenes) has been to circumvent the slow, hazardous, and laborious multistep synthesis procedures associated with conventional chemical MAX phase exfoliation. Here, we demonstrate a one-step synthesis method with local Ti3AlC2 MAX to Ti3C2Tz MXene conversion on the order of milliseconds, facilitated by proton production through solution dissociation under megahertz frequency acoustic excitation. These protons combined with fluorine ions from LiF to selectively etch the MAX phase into MXene, whose delamination is aided by the acoustic forcing. These results have important implications for the future applicability of MXenes, which crucially depend on the development of more efficient synthesis procedures. For proof-of-concept, we show that flexible electrodes fabricated by this method exhibit comparable electrochemical performance to that previously reported.

Bacteria-Anchoring Hybrid Liposome Capable of Absorbing Multiple Toxins for Antivirulence Therapy of Escherichia coli Infection

Antivirulence therapy by cell membrane coated nanoparticles has shown promise against bacterial infections. However, current approaches remain unsatisfactory when facing Escherichia coli (E. coli) infections, since the E. coli secretes multiple bacterial toxins including endotoxins and exotoxins that are challenging to eliminate simultaneously. What is worse, the absorptive scavengers normally rely on random contact of the diffuse toxins, which is not efficient. For the current cell membrane coated platform, the single type of cell membrane cannot fully meet the detoxing requirement facing multiple toxins. To address these problems, a polymyxin B (PMB)-modified, red blood cell (RBC)-mimetic hybrid liposome (P-RL) was developed. The P-RL was fabricated succinctly through fusion of PMB-modified lipids and the RBC membranes. By the strong interaction between PMB and the E. coli membrane, P-RL could attach and anchor to the E. coli; attributed to the fused RBC membrane and modified PMB, the P-RL could then efficiently neutralize both endotoxins and exotoxins from the toxin fountainhead. In vitro and in vivo results demonstrated the P-RL had a significant anchoring effect to E. coli. Moreover, compared with the existing RBC vesicles or PMB-modified liposomes, P-RL exhibited a superior therapeutic effect against RBC hemolysis, macrophage activation, and a mixed-toxin infection in mice. Potently, P-RL could inhibit E. coli O157:H7-induced skin damage, intestinal infection, and mouse death. Overall, the P-RL could potentially improve the detoxing efficiency and markedly expand the detoxification spectrum of current antivirulence systems, which provides different insights into drug-resistant E. coli treatment.

Advanced Optical Detection through the Use of a Deformably Transferred Nanofilm

Graphene has been extensively investigated in advanced photodetection devices for its broadband absorption, high carrier mobility, and mechanical flexibility. Due to graphene’s low optical absorptivity (2.3%), graphene-based photodetection research so far has focused on hybrid systems to increase photoabsorption. However, such hybrid systems require a complicated integration process and lead to reduced carrier mobility due to heterogeneous interfaces. Crumpled or deformed graphene has previously been reported in electronics and optoelectronics. However, a depth study on the influence of the morphology of nanofilms (e.g., graphite or graphene) related to light absorption in photodetection devices has not been demonstrated yet. Here, we present an interesting study in terms of the effect of the deformable surface and the smooth surface of a nanofilm transferred onto Si through two transfer strategies using isopropanol injection and nitrogen blowing (to form a deformable nanofilm surface) and deionized water injection and van der Waals interaction (to form a smooth nanofilm surface). As a result, optical detection in the case of the deformable nanofilm surface was enhanced significantly (~100%) compared with that of the smooth nanofilm surface in the visible laser wavelength (532 nm). In addition, evidence from the computational simulation also firmly affirms an advancement in the optical detection of deformed nanofilm-surface-based photodetection devices compatible with the experimental results.

Recent Developments in Nanocellulose-Based Aerogels in Thermal Applications: A Review

Naturally derived nanocellulose (NC) is a renewable, biodegradable nanomaterial with high strength, low density, high surface area, and tunable surface chemistry, which allows its interaction with other polymers and nanomaterials in a controlled manner. In recent years, NC aerogel has gathered a lot of attention due to environmental concerns. This review presents recent developments of NC-based aerogels and their controlled interactions with other polymers and nanomaterials for thermal applications that include electronic devices, the apparel industry, superinsulating materials, and flame-retardant smart building materials. After going through the distinctive properties of NC aerogels, they are orderly categorized and discussed as thermally insulated, thermally conductive, and flame-retardant materials.

A Bacteria-Inspired Morphology Genetic Biomedical Material: Self-Propelled Artificial Microbots for Metastatic Triple Negative Breast Cancer Treatment

Morphology genetic biomedical materials (MGBMs), referring to fabricating materials by learning from the genetic morphologies and strategies of natural species, hold great potential for biomedical applications. Inspired by the cargo-carrying-bacterial therapy (microbots) for cancer treatment, a MGBM (artificial microbots, AMBs) was constructed. Rather than the inherent bacterial properties (cancerous chemotaxis, tumor invasion, cytotoxicity), AMBs also possessed ingenious nitric oxide (NO) generation strategy. Mimicking the bacterial construction, the hyaluronic acid (HA) polysaccharide was induced as a coating capsule of AMBs to achieve long circulation in blood and specific tissue preference (tumor tropism). Covered under the capsule-like polysaccharide was the combinatorial agent, the self-assembly constructed by the amphiphilic dendrons with abundant l-arginine residues peripherally (as endogenous NO donor) and hydrophobic chemotherapeutic drugs at the core stacking on the surface of SWNTs (the photothermal agent) for a robust chemo-photothermal therapy (chemo-PTT) and the elicited immune therapy. Subsequently, the classic inducible nitric oxide synthase (iNOS) pathway aroused by immune response was revolutionarily utilized to oxidize the l-arginine substrates for NO production, the process for which could also be promoted by the high reactive oxygen species level generated by chemo-PTT. The NO generated by AMBs was intended to regulate vasodilation and cause a dramatic invasion (as the microbots) to disperse the therapeutic agents throughout the solid tumor for a much more enhanced curative effect, which we defined as "self-propulsion". The self-propelled AMBs exhibiting impressive primary tumor ablation, as well as the distant metastasis regression to conquer the metastatic triple negative breast cancer, provided pioneering potential therapeutic opportunities, and enlightened broad prospects in biomedical application.

X-ray-Based Techniques to Study the Nano-Bio Interface

X-ray-based analytics are routinely applied in many fields, including physics, chemistry, materials science, and engineering. The full potential of such techniques in the life sciences and medicine, however, has not yet been fully exploited. We highlight current and upcoming advances in this direction. We describe different X-ray-based methodologies (including those performed at synchrotron light sources and X-ray free-electron lasers) and their potentials for application to investigate the nano-bio interface. The discussion is predominantly guided by asking how such methods could better help to understand and to improve nanoparticle-based drug delivery, though the concepts also apply to nano-bio interactions in general. We discuss current limitations and how they might be overcome, particularly for future use in vivo.

Metal-Organic-Framework-Based Materials for Antimicrobial Applications

To address the serious threat of bacterial infection to public health, great efforts have been devoted to the development of antimicrobial agents for inhibiting bacterial growth, preventing biofilm formation, and sterilization. Very recently, metal-organic frameworks (MOFs) have emerged as promising materials for various antimicrobial applications owing to their different functions including the controlled/stimulated decomposition of components with bactericidal activity, strong interactions with bacterial membranes, and formation of photogenerated reactive oxygen species (ROS) as well as high loading and sustained releasing capacities for other antimicrobial materials. This review focuses on recent advances in the design, synthesis, and antimicrobial applications of MOF-based materials, which are classified by their roles as component-releasing (metal ions, ligands, or both), photocatalytic, and chelation antimicrobial agents as well as carriers or/and synergistic antimicrobial agents of other functional materials (antibiotics, enzymes, metals/metal oxides, carbon materials, etc.). The constituents, fundamental antimicrobial mechanisms, and evaluation of antimicrobial activities of these materials are highlighted to present the design principles of efficient MOF-based antimicrobial materials. The prospects and challenges in this research field are proposed.

Kinetically Determined Shapes of Grain Boundaries in Graphene

A large-scale chemical synthesis of graphene produces a polycrystalline material with grain boundaries (GBs) that disturb the lattice structure and drastically affect material properties. An uncontrollable formation of GB can be detrimental, yet precise GB engineering can impart added functionalities onto graphene-and its noncarbon two-dimensional "cousins." While the importance of growth kinetics in shaping single-crystalline graphene islands has lately been appreciated, kinetics' role in determining a GB structure remains unaddressed. Here we report on the analysis of the GB formation as captured by kinetic Monte Carlo simulations in contrast with global minimum guided GB structures considered previously. We identified a key parameter-edge misorientation angle-that describes the initial geometry of merging grains and unambiguously defines the resulting GB structure, while a commonly used lattice tilt angle corresponds to several qualitatively different GB structures. A provided systematic analysis of GB structures formed from a full range of edge misorientation angles reveals conditions that result in straight and periodic GBs as well as conditions responsible for meandering and disordered GBs. Additionally, we address the special case of translational GBs, where lattices of merging grains are aligned but shifted compared to each other. Collected data can be used for deliberate GB structural engineering, for example, by a three-dimensional patterning of the substrate surface to introduce disclinations creating a graphene lattice tilt.

Stokesian dynamics simulations of a magnetotactic bacterium

The swimming of bacteria provides insight into propulsion and steering under the conditions of low-Reynolds number hydrodynamics. Here we address the magnetically steered swimming of magnetotactic bacteria. We use Stokesian dynamics simulations to study the swimming of single-flagellated magnetotactic bacteria (MTB) in an external magnetic field. Our model MTB consists of a spherical cell body equipped with a magnetic dipole moment and a helical flagellum rotated by a rotary motor. The elasticity of the flagellum as well as magnetic and hydrodynamic interactions is taken into account in this model. We characterized how the swimming velocity is dependent on parameters of the model. We then studied the U-turn motion after a field reversal and found two regimes for weak and strong fields and, correspondingly, two characteristic time scales. In the two regimes, the U-turn time is dominated by the turning of the cell body and its magnetic moment or the turning of the flagellum, respectively. In the regime for weak fields, where turning is dominated by the magnetic relaxation, the U-turn time is approximately in agreement with a theoretical model based on torque balance. In the strong-field regime, strong deformations of the flagellum are observed. We further simulated the swimming of a bacterium with a magnetic moment that is inclined relative to the flagellar axis. This scenario leads to intriguing double helical trajectories that we characterize as functions of the magnetic moment inclination and the magnetic field. For small inclination angles ([Formula: see text]) and typical field strengths, the inclination of the magnetic moment has only a minor effect on the swimming of MTB in an external magnetic field. Large inclination angles result in a strong reduction in the velocity in direction of the magnetic field, consistent with recent observations that bacteria with large inclination angles use a different propulsion mechanism.

Metal-Organic Framework-Derived Hierarchical MnO/Co with Oxygen Vacancies toward Elevated-Temperature Li-Ion Battery

Transition metal oxides for high-temperature lithium-ion batteries have captivated orchestrated efforts for next-generation high-energy-density anodes. However, due to inherent low tap density, poor conductivity, and structural instability, their poor cyclability capacity and rate performance at elevated temperatures hinder further implementation. Oxygen vacancies (O_v) engineered by manipulating the active sites and electrical conductivity is a promising method for superior lithium storage. Herein, hierarchical MnO/Co nanoparticle-embedded N-doped carbon nanotube (CNT)-assembled carbonaceous micropolyhedrons (O_v-MnO/Co NCPs) are constructed by a "4S" self-assembly, self-template, self-adaptive, and self-catalytic metal-organic framework template method with in situ oxygen vacancies introduced. Impressively, the internal nanoparticles with metallic Co and the external N-doped carbonaceous matrix entangled by fluffy self-generated CNTs synchronously constructed hierarchical micro/nano-secondary hybrids, facilitating highly compacted density, staggered conductive network, multidirectional diffusion pathways, and accelerated electrochemical kinetics. Experimental and density functional theory investigations systematically manifested that the O_v alongside the local built-in electric field within the crystal lattice induced the boosted electrical conductivity, additional active sites, and alleviated structural expansion, further achieving the exceptional diffusivity coefficient and pseudocapacitive capacity. Benefiting from the integrated structural and compositional optimization, the O_v-MnO/Co NCPs achieved distinguished "3C" performance with superior ultralong cyclability (a volumetric capacity of 1713.5 mAh cm^-3 at 1 A g^-1 up to 1000 cycles), good rate capacity (a well-maintained capacity of 670.2 mAh g^-1 even at 10 A g^-1), and considerable high-temperature capability at 60 °C.

Shape-Programmable Interfacial Solar Evaporator with Salt-Precipitation Monitoring Function

Interfacial solar evaporators (ISEs) for seawater desalination have garnered enormous attention in recent decades due to global water scarcity. Despite the progress in the energy conversion efficiency and production rate of ISE, the poor portability of large-area ISE during transportation as well as the clogging of water transport pathways by precipitated salts during operation remain grand challenges for its fielded applications. Here, we designed an ISE with high energy conversion efficiency and shape morphing capability by integrating carbon nanotube (CNT) fillers with a light-responsive shape memory polymer (SMP, cross-linked polycyclooctene (cPCO)). Utilizing the shape memory effect, our ISE can be folded to an origami with 1/9 of its original size to save space for transportation and allow for on-demand unfolding upon sunlight irradiation when deployed in service. In addition, the ISE is equipped with a real-time clogging monitoring function by measuring the capacitance of the electric double layer (EDL) formed at the evaporator/seawater nanointerface. Due to its good energy conversion efficiency, high portability, and clogging monitoring capability, we envisage our ISE as a promising selection in solar evaporation technologies.

Biomimetic Salinity Power Generation Based on Silk Fibroin Ion-Exchange Membranes

Powering implanted medical devices (IMDs) is a long-term challenge since their use in biological environments requires a long-term and stable supply of power and a biocompatible and biodegradable battery system. Here, silk fibroin-based ion-exchange membranes are developed using bionics principles for reverse electrodialysis devices (REDs). Silk fibroin nanofibril (SNF) membranes are negatively and positively modified, resulting in strong cation and anion selectivity that regulates ion diffusion to generate electric power. These oppositely charged SNF membranes are assembled with Ag/AgCl electrodes into a multicompartment RED. By filling them with 10 and 0.001 mM NaCl solutions, a maximum output power density of 0.59 mW/m² at an external loading resistance of 66 kΩ is obtained. In addition, 10 pairs of SNF membranes produce a considerable voltage of 1.58 V. This work is a proof of concept that key components of battery systems can be fabricated with protein materials. Combined with the emergence of water-based battery technologies, the findings in this study provide insights for the construction of tissue-integrated batteries for the next generation of IMDs.