Recent advances of controlled drug delivery using microfluidic platforms

Precise Design Strategies of Nanotechnologies for Controlled Drug Delivery

Rapid advances in nanotechnologies are driving the revolution in controlled drug delivery. However, heterogeneous barriers, such as blood circulation and cellular barriers, prevent the drug from reaching the cellular target in complex physiologic environments. In this review, we discuss the precise design of nanotechnologies to enhance the efficacy, quality, and durability of drug delivery. For drug delivery in vivo, drugs loaded in nanoplatforms target particular sites in a spatial- and temporal-dependent manner. Advances in stimuli-responsive nanoparticles and carbon-based drug delivery platforms are summarized. For transdermal drug delivery systems, specific strategies including microneedles and hydrogel lead to a sustained release efficacy. Moreover, we highlight the current limitations of clinical translation and an incentive for the future development of nanotechnology-based drug delivery.

Surface behaviors of droplet manipulation in microfluidics devices

In recent years, the rapid development of microfluidic technology has caused a revolutionary impact in the fields of chemistry, medicine, and life sciences. Also, droplet control is one of the most important technologies in the field of microfluidics. In order to achieve different degrees of droplet transport, the dynamic balance of the competing processes of droplet driving force and fluid resistance should be controlled to achieve good selectivity of droplet transport. Here, we focus on the principles of droplet transport in microfluidic devices, including the driving forces for droplet transport in fluids and the effects of transport properties on droplet transport. After that, the effects of external fields on the directional transport of droplets and the advantages and disadvantages of each external field in droplet transport are discussed in detail. Finally, the applications and challenges of droplet microfluidics in chemical, biomedical, and mechanical systems are comprehensively introduced.

Prospection of Microfluidics for Local Drug Delivery

Significant endeavors can be made to develop effective drug delivery systems. Nowadays, many of these novel systems have gained attention as they focus primarily on increasing the bioavailability and bioaccessibility of several drugs to finally minimize the side effects, thus improving the treatment's efficacy. Microfluidics systems are unquestionably a superior technology, which is currently revolutionizing the current chemical and biological studies, providing diminutive chip-scale devices that offer precise dosage, target-precise delivery, and controlled release. Microfluidic systems have emerged as a promising delivery vehicle owing to their potential for defined handling and transporting of small liquid quantities. The latest microfabrication developments have been made for application to several biological systems. Here, we review the fundamentals of microfluidics and their application for local drug delivery.

Effect of Organic Solvents on a Production of PLGA-Based Drug-Loaded Nanoparticles Using a Microfluidic Device

The translation of nanoparticles (NPs) from laboratory to clinical settings is limited, which is not ideal. One of the reasons for this is that we currently have limited ability to precisely regulate various physicochemical parameters of nanoparticles. This has made it difficult to rapidly perform targeted screening of drug preparation conditions. In this study, we attempted to broaden the range of preparation conditions for particle size-modulated poly(lactic-co-glycolic-acid) (PLGA) NP to enhance their applicability for drug delivery systems (DDS). This was done using a variety of organic solvents and a glass-based microfluidic device. Furthermore, we compared the PDMS-based microfluidic device to the glass-based microfluidic device in terms of the possibility of a wider range of preparation conditions, especially the effect of different solvents on the size of the PLGA NPs. PLGA NPs with different sizes (sub-200 nm) were successfully prepared, and three different types of taxanes were employed for encapsulation. The drug-loaded NPs showed size-dependent cytotoxicity in cellular assays, regardless of the taxane drug used.

Photoacoustic-triggered nanomedicine delivery to internal organs using a dual-wavelength laparoscope

Precise drug delivery for internal organs is always an important clinical issue. In this study, we developed a dual-wavelength optical resolution photoacoustic laparoscope, and achieved precise and efficient delivery of nanomedicine to multiple abdominal organs. The laparoscope integrated 532 and 820 nm light to map the vascular network, and visually deliver the nanoparticles to the targeted area using photoacoustic radiation force, respectively. To achieve endoscopic use, we employed a micro-electro-mechanical-system (MEMS) scanner to realize internal two-dimensional raster scanning of the optical beams. Using phantom experiments, the lateral resolutions were measured as 3.75 μm for 532 nm, and 5.25 μm for 820 nm, respectively. Besides, we demonstrated the feasibility of targeted drug delivery using mouse-ear tumor model, normal organs, and colon tumor model. All the experimental results suggested that this strategy can serve as a promising precise drug delivery method for the effective treatment of internal organ diseases.

Microfluidics Fabrication of Micrometer-Sized Hydrogels with Precisely Controlled Geometries for Biomedical Applications

Micrometer-sized hydrogels are cross-linked three-dimensional network matrices with high-water contents and dimensions ranging from several to hundreds of micrometers. Due to their excellent biocompatibility and capability to mimic physiological microenvironments in vivo, micrometer-sized hydrogels have attracted much attention in the biomedical engineering field. Their biological properties and applications are primarily influenced by their chemical compositions and geometries. However, inhomogeneous morphologies and uncontrollable geometries limit traditional micrometer-sized hydrogels obtained by bulk mixing. In contrast, microfluidic technology holds great potential for the fabrication of micrometer-sized hydrogels since their geometries, sizes, structures, compositions, and physicochemical properties can be precisely manipulated on demand based on the excellent control over fluids. Therefore, micrometer-sized hydrogels fabricated by microfluidic technology have been applied in the biomedical field, including drug encapsulation, cell encapsulation, and tissue engineering. This review introduces micrometer-sized hydrogels with various geometries synthesized by different microfluidic devices, highlighting their advantages in various biomedical applications over those from traditional approaches. Overall, emerging microfluidic technologies enrich the geometries and morphologies of hydrogels and accelerate translation for industrial production and clinical applications.

Microfluidic Nanomaterial Synthesis and In Situ SAXS, WAXS, or SANS Characterization: Manipulation of Size Characteristics and Online Elucidation of Dynamic Structural Transitions

With the ability to cross biological barriers, encapsulate and efficiently deliver drugs and nucleic acid therapeutics, and protect the loaded cargos from degradation, different soft polymer and lipid nanoparticles (including liposomes, cubosomes, and hexosomes) have received considerable interest in the last three decades as versatile platforms for drug delivery applications and for the design of vaccines. Hard nanocrystals (including gold nanoparticles and quantum dots) are also attractive for use in various biomedical applications. Here, microfluidics provides unique opportunities for the continuous synthesis of these hard and soft nanomaterials with controllable shapes and sizes, and their in situ characterization through manipulation of the flow conditions and coupling to synchrotron small-angle X-ray (SAXS), wide-angle scattering (WAXS), or neutron (SANS) scattering techniques, respectively. Two-dimensional (2D) and three-dimensional (3D) microfluidic devices are attractive not only for the continuous production of monodispersed nanomaterials, but also for improving our understanding of the involved nucleation and growth mechanisms during the formation of hard nanocrystals under confined geometry conditions. They allow further gaining insight into the involved dynamic structural transitions, mechanisms, and kinetics during the generation of self-assembled nanostructures (including drug nanocarriers) at different reaction times (ranging from fractions of seconds to minutes). This review provides an overview of recently developed 2D and 3D microfluidic platforms for the continuous production of nanomaterials, and their simultaneous use in in situ characterization investigations through coupling to nanostructural characterization techniques (e.g., SAXS, WAXS, and SANS).

Microfluidic Systems For Manufacturing of Microparticle-Based Drug-Delivery Systems: Design, Construction, and Operation

Particles synthesized from biodegradable polymers hold great potential as controlled drug delivery systems. Continuous flow platforms based on microfluidics offer attractive advantages over conventional batch-emulsification techniques for the scalable fabrication of drug-loaded particles with controlled physicochemical properties. However, widespread utilization of microfluidic technologies for the manufacturing of drug-loaded particles has been hindered largely by the lack of practical guidelines toward cost-effective development and reliable operation of microfluidic systems. Here, we present a framework for rational design and construction of microfluidic systems using commercially available components for high-throughput production of uniform biodegradable particles encapsulating drugs. We also demonstrate successful implementation of this framework to devise a robust microfluidic system that is capable of producing drug-carrying particles with desired characteristics. The guidelines provided in this study will likely help broaden the applicability of microfluidic technologies for the synthesis of high-quality, drug-loaded biodegradable particles.

Immunotherapy discovery on tumor organoid-on-a-chip platforms that recapitulate the tumor microenvironment

Cancer immunotherapy has achieved remarkable success over the past decade by modulating patients' own immune systems and unleashing pre-existing immunity. However, only a minority of cancer patients across different cancer types are able to benefit from immunotherapy treatment; moreover, among those small portions of patients with response, intrinsic and acquired resistance remains a persistent challenge. Because the tumor microenvironment (TME) is well recognized to play a critical role in tumor initiation, progression, metastasis, and the suppression of the immune system and responses to immunotherapy, understanding the interactions between the TME and the immune system is a pivotal step in developing novel and efficient cancer immunotherapies. With unique features such as low reagent consumption, dynamic and precise fluid control, versatile structures and function designs, and 3D cell co-culture, microfluidic tumor organoid-on-a-chip platforms that recapitulate key factors of the TME and the immune contexture have emerged as innovative reliable tools to investigate how tumors regulate their TME to counteract antitumor immunity and the mechanism of tumor resistance to immunotherapy. In this comprehensive review, we focus on recent advances in tumor organoid-on-a-chip platforms for studying the interaction between the TME and the immune system. We first review different factors of the TME that recent microfluidic in vitro systems reproduce to generate advanced tools to imitate the crosstalk between the TME and the immune system. Then, we discuss their applications in the assessment of different immunotherapies' efficacy using tumor organoid-on-a-chip platforms. Finally, we present an overview and the outlook of engineered microfluidic platforms in investigating the interactions between cancer and immune systems, and the adoption of patient-on-a-chip models in clinical applications toward personalized immunotherapy.

Smart Mushroom-Inspired Imprintable and Lightly Detachable (MILD) Microneedle Patterns for Effective COVID-19 Vaccination and Decentralized Information Storage

The key to controlling the spread of the coronavirus disease 2019 (COVID-19) and reducing mortality is highly dependent on the safe and effective use of vaccines for the general population. Current COVID-19 vaccination practices (intramuscular injection of solution-based vaccines) are limited by heavy reliance on medical professionals, poor compliance, and laborious vaccination recording procedures, resulting in a waste of health resources and low vaccination coverage, etc. In this study, we developed a smart mushroom-inspired imprintable and lightly detachable (MILD) microneedle platform for the effective and convenient delivery of multidose COVID-19 vaccines and decentralized vaccine information storage. The mushroom-like structure allows the MILD system to be easily pressed into the skin and detached from the patch base, acting as a "tattoo" to record the vaccine counts in situ without any storage equipment, offering quick accessibility and effortless readout, saving a great deal of valuable time and energy for both patients and health professionals. After loading inactivated SARS-CoV-2 virus-based vaccines, MILD system induced a high level of antibodies against the SARS-CoV-2 receptor-binding domain (RBD) in vivo without eliciting systemic toxicity and local damage. Collectively, this smart delivery platform serves as a promising carrier to improve COVID-19 vaccination efficacy through its dual capabilities of vaccine delivery and in situ data storage, thus exhibiting great potential for helping to contain the COVID-19 pandemic or a resurgence.

Recent Advances in Microfluidic Platform for Physical and Immunological Detection and Capture of Circulating Tumor Cells

CTCs (circulating tumor cells) are well-known for their use in clinical trials for tumor diagnosis. Capturing and isolating these CTCs from whole blood samples has enormous benefits in cancer diagnosis and treatment. In general, various approaches are being used to separate malignant cells, including immunomagnets, macroscale filters, centrifuges, dielectrophoresis, and immunological approaches. These procedures, on the other hand, are time-consuming and necessitate multiple high-level operational protocols. In addition, considering their low efficiency and throughput, the processes of capturing and isolating CTCs face tremendous challenges. Meanwhile, recent advances in microfluidic devices promise unprecedented advantages for capturing and isolating CTCs with greater efficiency, sensitivity, selectivity and accuracy. In this regard, this review article focuses primarily on the various fabrication methodologies involved in microfluidic devices and techniques specifically used to capture and isolate CTCs using various physical and biological methods as well as their conceptual ideas, advantages and disadvantages.

Shape-Programmable Three-Dimensional Microfluidic Structures

Microfluidic devices are gaining extensive interest due to their potential applications in wide-ranging areas, including lab-on-a-chip devices, fluid delivery, and artificial vascular networks. Most current microfluidic devices are in a planar design with fixed configurations once formed, which limits their applications such as in engineered vascular networks in biology and programmable drug delivery systems. Here, shape-programmable three-dimensional (3D) microfluidic structures, which are assembled from a bilayer of channel-embedded polydimethylsiloxane (PDMS) and shape-memory polymers (SMPs) via compressive buckling, are reported. 3D microfluidics in diverse geometries including those in open-mesh configurations are presented. In addition, they can be programmed into temporary shapes and recover their original shape under thermal stimuli due to the shape memory effect of the SMP component, with fluid flow in the microfluidic channels well maintained in both deformed and recovered shapes. Furthermore, the shape-fixing effect of SMPs enables freestanding open-mesh 3D microfluidic structures without the need for a substrate to maintain the 3D shape as used in previous studies. By adding magnetic particles into the PDMS layer, magnetically responsive 3D microfluidic structures are enabled to achieve fast, remote programming of the structures via a portable magnet. A 3D design phase diagram is constructed to show the effects of the magnetic PDMS/SMP thickness ratio and the volume fraction of magnetic particles on the shape programmability of the 3D microfluidic structures. The developed shape-programmable, open-mesh 3D microfluidic structures offer many opportunities for applications including tissue engineering, drug delivery, and many others.

Advances in the Novel Nanotechnology for the Targeted Tumor Therapy by the Transdermal Drug Delivery

Despite modern medicine advances greatly, cancer remains a serious challenge to world health for which effective methods of treatment have hardly been developed yet. However, throughout the recent years, the rapid-developing nanotechnology has provided a new outlook of cancer therapy by transdermal drug delivery. By disrupting the stratum corneum, drugs are delivered through the skin and navigated to the tumor site by drug delivery systems such as nanogels, microneedles, etc. The superiorities include the improvement of drug pharmacokinetics as well as reduced side effects. This paper reviews the reported novel development of transdermal drug delivery systems for targeted cancer therapy. Advanced techniques for penetrating the skin will be discussed as well.

Recent Development of Drug Delivery Systems through Microfluidics: From Synthesis to Evaluation

Conventional drug administration usually faces the problems of degradation and rapid excretion when crossing many biological barriers, leading to only a small amount of drugs arriving at pathological sites. Therapeutic drugs delivered by drug delivery systems to the target sites in a controlled manner greatly enhance drug efficacy, bioavailability, and pharmacokinetics with minimal side effects. Due to the distinct advantages of microfluidic techniques, microfluidic setups provide a powerful tool for controlled synthesis of drug delivery systems, precisely controlled drug release, and real-time observation of drug delivery to the desired location at the desired rate. In this review, we present an overview of recent advances in the preparation of nano drug delivery systems and carrier-free drug delivery microfluidic systems, as well as the construction of in vitro models on-a-chip for drug efficiency evaluation of drug delivery systems. We firstly introduce the synthesis of nano drug delivery systems, including liposomes, polymers, and inorganic compounds, followed by detailed descriptions of the carrier-free drug delivery system, including micro-reservoir and microneedle drug delivery systems. Finally, we discuss in vitro models developed on microfluidic devices for the evaluation of drug delivery systems, such as the blood–brain barrier model, vascular model, small intestine model, and so on. The opportunities and challenges of the applications of microfluidic platforms in drug delivery systems, as well as their clinical applications, are also discussed.

Microchannel-embedded implantable device with fibrosis suppression for prolonged controlled drug delivery

For the prolonged, controlled delivery of systemic drugs, we propose an implantable drug-delivery chip (DDC) embedded with pairs of a microchannel and drug-reservoir serving as a drug diffusion barrier and depot, respectively. We pursued a DDC for dual drugs: a main-purpose drug, diclofenac (DF), for systemic exposure, and an antifibrotic drug, tranilast (TR), for local delivery. Thus, the problematic fibrotic tissue formation around the implanted device could be diminished, thereby less hindrance in systemic exposure of DF released from the DDC. First, we separately prepared DDCs for DF or TR delivery, and sought to find a proper microchannel length for a rapid onset and sustained pattern of drug release, as well as the required drug dose. Then, two distinct DDCs for DF and TR delivery, respectively, were assembled to produce a Dual_DDC for the concurrent delivery of DF and TR. When the Dual_DDC was implanted in living rats, the DF concentration in blood plasma did not drop significantly in the later periods after implantation relative to that in the early periods before fibrotic tissue formation. When the Dual_DDC was implanted without TR, there was a significant decrease in the blood plasma DF concentration as the time elapsed after implantation. Biopsied tissues around the Dual_DDC exhibited a significant decrease in the fibrotic capsule thickness and collagen density relative to the Dual_DDC without TR, owing to the effect of the local, sustained release of the TR.

Fast Electrochemical Actuator with Ti Electrodes in the Current Stabilization Regime

The actuators needed for autonomous microfluidic devices have to be compact, low-power-consuming, and compatible with microtechnology. The electrochemical actuators could be good candidates, but they suffer from a long response time due to slow gas termination. An actuator in which the gas is terminated orders of magnitude faster has been demonstrated recently. It uses water electrolysis performed by short voltage pulses of alternating polarity (AP). However, oxidation of Ti electrodes leads to a rapid decrease in the performance. In this paper, we demonstrate a special driving regime of the actuator, which is able to support a constant stroke for at least 105 cycles. The result is achieved using a new driving regime when a series of AP pulses are interspersed with a series of single-polarity (SP) pulses. The new regime is realized by a special pulse generator that automatically adjusts the amplitude of the SP pulses to keep the current flowing through the electrodes at a fixed level. The SP pulses increase the power consumption by 15–60% compared to the normal AP operation and make the membrane oscillate in a slightly lifted position.

Compatibility of Popular Three-Dimensional Printed Microfluidics Materials with In Vitro Enzymatic Reactions

3D printed microfluidics offer several advantages over conventional planar microfabrication techniques including fabrication of 3D microstructures, rapid prototyping, and inertness. While 3D printed materials have been studied for their biocompatibility in cell and tissue culture applications, their compatibility for in vitro biochemistry and molecular biology has not been systematically investigated. Here, we evaluate the compatibility of several common enzymatic reactions in the context of 3D-printed microfluidics: (1) polymerase chain reaction (PCR), (2) T7 in vitro transcription, (3) mammalian in vitro translation, and (4) reverse transcription. Surprisingly, all the materials tested significantly inhibit one or more of these in vitro enzymatic reactions. Inclusion of BSA mitigates only some of these inhibitory effects. Overall, inhibition appears to be due to a combination of the surface properties of the resins as well as soluble components (leachate) originating in the matrix.

Molecularly Imprinted Polymers as State-of-the-Art Drug Carriers in Hydrogel Transdermal Drug Delivery Applications

Molecularly Imprinted Polymers (MIPs) are polymeric networks capable of recognizing determined analytes. Among other methods, non-covalent imprinting has become the most popular synthesis strategy for Molecular Imprinting Technology (MIT). While MIPs are widely used in various scientific fields, one of their most challenging applications lies within pharmaceutical chemistry, namely in therapeutics or various medical therapies. Many studies focus on using hydrogel MIPs in transdermal drug delivery, as the most valuable feature of hydrogels in their application in drug delivery systems that allow controlled diffusion and amplification of the microscopic events. Hydrogels have many advantages over other imprinting materials, such as milder synthesis conditions at lower temperatures or the increase in the availability of biological templates like DNA, protein, and nucleic acid. Moreover, one of the most desirable controlled drug delivery applications is the development of stimuli-responsive hydrogels that can modulate the release in response to changes in pH, temperature, ionic strength, or others. The most important feature of these systems is that they can be designed to operate within a particular human body area due to the possibility of adapting to well-known environmental conditions. Therefore, molecularly imprinted hydrogels play an important role in the development of modern drug delivery systems.

Microelectromechanical Systems (MEMS) for Biomedical Applications

The significant advancements within the electronics miniaturization field have shifted the scientific interest towards a new class of precision devices, namely microelectromechanical systems (MEMS). Specifically, MEMS refers to microscaled precision devices generally produced through micromachining techniques that combine mechanical and electrical components for fulfilling tasks normally carried out by macroscopic systems. Although their presence is found throughout all the aspects of daily life, recent years have witnessed countless research works involving the application of MEMS within the biomedical field, especially in drug synthesis and delivery, microsurgery, microtherapy, diagnostics and prevention, artificial organs, genome synthesis and sequencing, and cell manipulation and characterization. Their tremendous potential resides in the advantages offered by their reduced size, including ease of integration, lightweight, low power consumption, high resonance frequency, the possibility of integration with electrical or electronic circuits, reduced fabrication costs due to high mass production, and high accuracy, sensitivity, and throughput. In this context, this paper aims to provide an overview of MEMS technology by describing the main materials and fabrication techniques for manufacturing purposes and their most common biomedical applications, which have evolved in the past years.

Microfluidic mechanoporation for cellular delivery and analysis

Highly efficient intracellular delivery strategies are essential for developing therapeutic, diagnostic, biological, and various biomedical applications. The recent advancement of micro/nanotechnology has focused numerous researches towards developing microfluidic device-based strategies due to the associated high throughput delivery, cost-effectiveness, robustness, and biocompatible nature. The delivery strategies can be carrier-mediated or membrane disruption-based, where membrane disruption methods find popularity due to reduced toxicity, enhanced delivery efficiency, and cell viability. Among all of the membrane disruption techniques, the mechanoporation strategies are advantageous because of no external energy source required for membrane deformation, thereby achieving high delivery efficiencies and increased cell viability into different cell types with negligible toxicity. The past two decades have consequently seen a tremendous boost in mechanoporation-based research for intracellular delivery and cellular analysis. This article provides a brief review of the most recent developments on microfluidic-based mechanoporation strategies such as microinjection, nanoneedle arrays, cell-squeezing, and hydroporation techniques with their working principle, device fabrication, cellular delivery, and analysis. Moreover, a brief discussion of the different mechanoporation strategies integrated with other delivery methods has also been provided. Finally, the advantages, limitations, and future prospects of this technique are discussed compared to other intracellular delivery techniques.

Biofilm Responsive Zwitterionic Antimicrobial Nanoparticles to Treat Cutaneous Infection

To avert the poor bioavailability of antibiotics during S. aureus biofilm infections, a series of zwitterionic nanoparticles containing nucleic acid nanostructures were fabricated for the delivery of vancomycin. The nanoparticles were prepared with three main lipids: (i) neutral (soy phosphatidylcholine; P), (ii) positively charged ionizable (1,2-dioleyloxy-3-dimethylaminopropane; D), and (iii) anionic (1,2-dipalmitoyl-sn-glycero-3-phospho((ethyl-1′,2′,3′-triazole) triethylene glycolmannose; M) or (cholesteryl hemisuccinate; C) lipids. The ratio of the anionic lipid was tuned between 0 and 10 mol %, and its impact on surface charge, size, stability, toxicity, and biofilm sensitivity was evaluated. Under biofilm mimicking conditions, the enzyme degradability (via dynamic light scattering (DLS)), antitoxin (via DLS and spectrophotometry), and antibiotic release profile was assessed. Additionally, biofilm penetration, prevention (in vitro), and eradication (ex vivo) of the vancomycin loaded formulation was investigated. Compared with the unmodified nanoparticles which exhibited the smallest size (188 nm), all three surface modified formulations showed significantly larger sizes (i.e., 222–277 nm). Under simulations of biofilm pH conditions, the mannose modified nanoparticle (PDM 90/5/5) displayed ideal charge reversal from a neutral (+1.69 ± 1.83 mV) to a cationic surface potential (+17.18 ± 2.16 mV) to improve bacteria binding and biofilm penetration. In the presence of relevant bacterial enzymes, the carrier rapidly released the DNA nanoparticles to function as an antitoxin against α-hemolysin. Controlled release of vancomycin prevented biofilm attachment and significantly reduced early stage biofilm formations within 24 h. Enhanced biocompatibility and significant ex vivo potency of the PDM 90/5/5 formulation was also observed. Taken together, these results emphasize the benefit of these nanocarriers as potential therapies against biofilm infections and fills the gap for multifunctional nanocarriers that prevent biofilm infections.

Microfluidic-Generated Immunomodulatory Nanoparticles and Formulation-Dependent Effects on Lipopolysaccharide-Induced Macrophage Inflammation

Nanoparticles (NPs) have emerged as a highly useful and clinically translatable drug delivery platform for vast therapeutic payloads. Through the precise tuning of their physicochemical properties, NPs can be engineered to exhibit controlled drug release properties, enhanced circulation times, improved cellular uptake and targeting, and reduced toxicity profiles. Conventional bulk methods for the production of polymeric NPs suffer from the ability to control their size and polydispersity, batch-to-batch variability, significant preparation times, and low recovery. Here, we describe the development and optimization of a high-throughput microfluidic method to produce cargo-less immunomodulatory nanoparticles (iNPs) and their formulation-dependent anti-inflammatory properties for the modulation of lipopolysaccharide (LPS)-induced macrophage responses. Using poly(lactic acid) (PLA) as the core-forming polymer, a rapid and tunable microfluidic hydrodynamic flow-focusing method was developed and optimized to systematically evaluate the role of polymer and surfactant concentration, surfactant chemistry, and flow rate ratio (FRR) on the formation of iNPs. A set of iNPs with 6 different surface chemistries and 2 FRRs was then prepared to evaluate their inherent anti-inflammatory effects using bone marrow-derived macrophages stimulated with the Toll-like receptor 4 agonist, LPS. Finally, a lyophilization study was performed using various cryoprotectants and combinations to identify preferable conditions for iNP storage. Overall, we demonstrate a highly controlled and reproducible method for the formulation of iNPs using microfluidics and their formulation-dependent inherent anti-inflammatory immunomodulatory properties, which represents a potentially promising strategy for the management of inflammation.

A Novel Capsule-Delivered Enteric Drug-Injection Device for Delivery of Systemic Biologics: A Pilot Study in a Porcine Model

Innovative swallowable capsule technologies such as drug-loaded, dissolvable microneedles, mucoadhesive patches, and various microdevices present unique drug-carrying capabilities to overcome challenges regarding oral delivery of biologics. Here, we report a swallowable capsule for intestinal drug delivery (SCIDD) with the potential of directly injecting biological therapeutics into the insensate small intestine wall. The design, optimization, and validation of the SCIDD's primary subsystems were performed both ex-vivo and in-vivo. The assembled capsule was further tested in vivo to validate the actuation sequence and showed a 70% (n=17) success rate in an animal model. Additionally, a drug delivery study indicated systemic uptake of adalimumab via SCIDD compared with luminal delivery in the small intestine. The pilot study presented here establishes that the novel platform could be used to orally deliver systemic biologics.

Recent progress of inertial microfluidic-based cell separation

Cell separation has consistently been a pivotal technology of sample preparation in biomedical research. Compared with conventional bulky cell separation technologies applied in the clinic, cell separation based on microfluidics can accurately manipulate the displacement of liquid or cells at the microscale, which has great potential in point-of-care testing (POCT) applications due to small device size, low cost, low sample consumption, and high operating accuracy. Among various microfluidic cell separation technologies, inertial microfluidics has attracted great attention due to its simple structure and high throughput. In recent years, many researchers have explored the principles and applications of inertial microfluidics and developed different channel structures, including straight channels, curved channels, and multistage channels. However, the recently developed multistage channels have not been discussed and classified in detail compared with more widely discussed straight and curved channels. Therefore, in this review, a comprehensive and detailed review of recent progress in the multistage channel is presented. According to the channel structure, the inertial microfluidic separation technology is divided into (i) straight channel, (ii) curved channel, (iii) composite channel, and (iv) integrated device. The structural development of straight and curved channels is discussed in detail. And based on straight and curved channels, the multistage cell separation structures are reviewed, with a special focus on a variety of latest structures and related innovations of composite and integrated channels. Finally, the future prospects for the existing challenges in the development of inertial microfluidic cell separation technology are presented.

Recent advances in polymeric transdermal drug delivery systems

Transdermal delivery has proven to be one of the most favorable methods among novel drug delivery systems. Since drugs administered by transdermal delivery systems avoid the gastrointestinal tract, and thus avoid conversion by the liver, the likelihood of liver dysfunction and gastrointestinal tract irritation as side effects is low. Drug delivery through the skin has other advantages, such as maintaining an effective rate of drug delivery over time, a steady rate of circulation, and the benefits of a passive delivery system and diffusion. Transdermal drug delivery is achieved using patches which consist of different and specific layers. In the last few decades, many types of patches have been approved worldwide, such as medical plasters, which have been generally applied to the skin for localized diseases. Such patches can be traced back to ancient China (around 2000 BCE) and are the early precursors of today's transdermal patches. With the help of effective design, materials, manufacturing, and evaluation, a large number of drugs can now be administered using this valuable advanced technology. This study reviews different types of polymer patches, their advantages and disadvantages, and different studies related to transdermal drug delivery methods, and the advantages and disadvantages of each method. Different mechanisms of transdermal drug delivery system with patches are also discussed.

Microfluidic encapsulation for controlled release and its potential for nanofertilisers

Nanotechnology is increasingly being utilized to create advanced materials with improved or new functional attributes. Converting fertilizers into a nanoparticle-form has been shown to improve their efficacy but the current procedures used to fabricate nanofertilisers often have poor reproducibility and flexibility. Microfluidic systems, on the other hand, have advantages over traditional nanoparticle fabrication methods in terms of energy and materials consumption, versatility, and controllability. The increased controllability can result in the formation of nanoparticles with precise and complex morphologies (e.g., tuneable sizes, low polydispersity, and multi-core structures). As a result, their functional performance can be tailored to specific applications. This paper reviews the principles, formation, and applications of nano-enabled delivery systems fabricated using microfluidic approaches for the encapsulation, protection, and release of fertilizers. Controlled release can be achieved using two main routes: (i) nutrients adsorbed on nanosupports and (ii) nutrients encapsulated inside nanostructures. We aim to highlight the opportunities for preparing a new generation of highly versatile nanofertilisers using microfluidic systems. We will explore several main characteristics of microfluidically prepared nanofertilisers, including droplet formation, shell fine-tuning, adsorbate fine-tuning, and sustained/triggered release behavior.

Microfluidic Systems for Cancer Diagnosis and Applications

Microfluidic devices have led to novel biological advances through the improvement of micro systems that can mimic and measure. Microsystems easily handle sub-microliter volumes, obviously with guidance presumably through laminated fluid flows. Microfluidic systems have production methods that do not need expert engineering, away from a centralized laboratory, and can implement basic and point of care analysis, and this has attracted attention to their widespread dissemination and adaptation to specific biological issues. The general use of microfluidic tools in clinical settings can be seen in pregnancy tests and diabetic control, but recently microfluidic platforms have become a key novel technology for cancer diagnostics. Cancer is a heterogeneous group of diseases that needs a multimodal paradigm to diagnose, manage, and treat. Using advanced technologies can enable this, providing better diagnosis and treatment for cancer patients. Microfluidic tools have evolved as a promising tool in the field of cancer such as detection of a single cancer cell, liquid biopsy, drug screening modeling angiogenesis, and metastasis detection. This review summarizes the need for the low-abundant blood and serum cancer diagnosis with microfluidic tools and the progress that has been followed to develop integrated microfluidic platforms for this application in the last few years.

Three months extended-release microspheres prepared by multi-microchannel microfluidics in beagle dog models

To evaluate in vivo drug release profiles in beagle dogs, finasteride-loaded PLGA microspheres were prepared using a novel method of IVL-PPF Microsphere® microfluidic device. Briefly, the dispersed phase (PLGA and finasteride in dichloromethane) was mixed with the continuous phase (0.25% w/v PVA aqueous solution) in the parallelized microchannels. After lyophilization, the diameter of the microspheres was around 40 μm (PLGA 7502A or 5002A) and around 30 µm (PLGA/PLA02A mixture). Their CV and span values suggested a narrow size distribution in repeated batch preparations. The in vivo drug release from the PLGA microspheres exhibited three substantial phases: an initial burst, a moderate release, and then a plateau. The microspheres based on PLGA 7502A (75:25 co-polymer) demonstrated extended drug release for around 1 month with a minimized initial burst release compared to PLGA 5002A (50:50 co-polymer). Moreover, the in vivo drug release profile in beagle dogs was proportionally related to the amount of drug loading. Furthermore, the addition of PLA02A into the fabrication of the microsphere synergistically extended the drug release up to 3 months. These results demonstrated the value of this method to achieve uniform microspheres and extend the drug release properties with interpretative in vivo PK profiles.

Optimized design of obstacle sequences for microfluidic mixing in an inertial regime

Mixing is a basic but challenging step to achieve in high throughput microfluidic applications such as organic synthesis or production of particles. A common approach to improve micromixer performance is to devise a single component that enhances mixing through optimal convection, and then sequence multiple such units back-to-back to enhance overall mixing at the end of the sequence. However, the mixing units are often optimized only for the initial non-mixed fluid composition, which is no longer the input condition for each subsequent unit. Thus, there is no guarantee that simply repeating a single mixing unit will achieve optimally mixed fluid flow at the end of the sequence. In this work, we analyzed sequences of 20 cylindrical obstacles, or pillars, to optimize the mixing in the inertial regime (where mixing is more difficult due to higher Péclet number) by managing their interdependent convection operations on the composition of the fluid. Exploiting a software for microfluidic design optimization called FlowSculpt, we predicted and optimized the interfacial stretching of two co-flowing fluids, neglecting diffusive effects. We were able to quickly design three different optimal pillar sequences through a space of 32²⁰ possible combinations of pillars. As proof of concept, we tested the new passive mixer designs using confocal microscopy and full 3D CFD simulations for high Péclet numbers (Pe ≈ O(10^5-6)), observing fluid flow shape and mixing index at several cross-sections, reaching mixing efficiencies around 80%. Furthermore, we investigated the effect of the inter-pillar spacing on the most optimal design, quantifying the tradeoff between mixing performance and hydraulic resistance. These micromixer designs and the framework for the design in inertial regimes can be used for various applications, such as lipid nanoparticle fabrication which has been of great importance in vaccine scale up during the pandemic.

Vasculature-on-chip for Assessment of Bioresorbable Scaffolds and Endothelial Barrier Integrity

ABSTRACT

Endothelial cells adhere to one another through junctional structures formed by intercellular adhesion molecules. These intercellular proteins regulate barrier function in response to the hemodynamic shear rate and enable the selective passage of solutes and fluids across the endothelium. After endovascular device implantation, the endothelial barrier is compromised and becomes discontinuous, which increases permeability, allowing transmigration of leukocytes and lipoproteins and leading to the accumulation of lipid-laden foamy macrophages in the subendothelial space. Drug-coated bioresorbable vascular scaffold implants have been associated with unexpected thrombotic complications, which were not predicted in animals because of dissimilarities in endothelial regeneration and realignment between animals and humans. The development of a microengineered, microfluidics-based system of patterned channels lined with human endothelial and smooth muscle cells perfused with blood allows for the evaluation of endothelial function and barrier integrity. This review highlights the translational potential of vasculature-on-chip, which recreates the microphysiological milieu to evaluate the impact of drug-eluting bioresorbable vascular scaffolds on endothelial barrier integrity and to characterize polymer biodegradation behavior and drug release kinetic profiles over time.

Triboelectric Nanogenerators for Self-Powered Wound Healing

Wound healing, one of the most complex processes in the human body, involves the spatial and temporal synchronization of a variety of cell types with distinct roles. Slow or nonhealing skin wounds have potentially life-threatening consequences, ranging from infection to scar, clot, and hemorrhage. Recently, the advent of triboelectric nanogenerators (TENGs) has brought about a plethora of self-powered wound healing opportunities, owing to their pertinent features, including wide range choices of constitutive biocompatible materials, simple fabrication, portable size, high output power, and low cost. Herein, a comprehensive review of TENGs as an emerging biotechnology for wound healing applications is presented and covered from three unique aspects: electrical stimulation, antibacterial activity, and drug delivery. To provide a broader context of TENGs applicable to wound healing applications, state-of-the-art designs are presented and discussed in each section. Although some challenges remain, TENGs are proving to be a promising platform for human-centric therapeutics in the era of Internet of Things. Consequently, TENGs for wound healing are expected to provide a new solution in wound management and play an essential role in the future of point-of-care interventions.

Responsive Dual-Targeting Exosome as a Drug Carrier for Combination Cancer Immunotherapy

Recently, combination immunotherapy, which incorporates the activation of the immune system and inhibition of immune escape, has been proved to be a new powerful strategy for more efficient tumor suppression compared to monotherapy. However, the major challenge is how to integrate multiple immune drugs together and efficiently convey these drugs to tumor sites. Although a variety of nanomaterials have been exploited as carriers for targeting tumor issues and the delivery of multiple drugs, their potential toxicity, immune rejection, and stability are still controversial for clinical application. Here, we proposed endogenic exosomes as drug carriers to deliver two antibodies acting as tumor-targeting molecules and block checkpoint inhibitors with specific response to the tumor microenvironment and costimulatory molecules for further improvement of therapeutic effect. The versatile exosomes exhibit excellent biocompatibility and provide a combination immunotherapy platform with synergistic advantages of activation of immune response and inhibition of immune escape.

Recent Advances of Microfluidic Platforms for Controlled Drug Delivery in Nanomedicine

Nanomedicine drug delivery systems hold great potential for the therapy of many diseases, especially cancer. However, the controlled drug delivery systems of nanomedicine bring many challenges to clinical practice. These difficulties can be attributed to the high batch-to-batch variations and insufficient production rate of traditional preparation methods, as well as a lack of technology for fast screening of nanoparticulate drug delivery structures with high correlation to in vivo tests. These problems may be addressed through microfluidic technology. Microfluidics, for example, can not only produce nanoparticles in a well-controlled, reproducible, and high-throughput manner, but it can also continuously create three-dimensional environments to mimic physiological and/or pathological processes. This overview gives a top-level view of the microfluidic devices advanced to put together nanoparticulate drug delivery systems, including drug nanosuspensions, polymer nanoparticles, polyplexes, structured nanoparticles and therapeutic nanoparticles. Additionally, highlighting the current advances of microfluidic systems in fabricating the more and more practical fashions of the in vitro milieus for fast screening of nanoparticles was reviewed. Overall, microfluidic technology provides a promising technique to boost the scientific delivery of nanomedicine and nanoparticulate drug delivery systems. Nonetheless, digital microfluidics with droplets and liquid marbles is the answer to the problems of cumbersome external structures, in addition to the rather big pattern volume. As the latest work is best at the proof-of-idea of liquid-marble-primarily based on totally virtual microfluidics, computerized structures for developing liquid marble, and the controlled manipulation of liquid marble, including coalescence and splitting, are areas of interest for bringing this platform toward realistic use.

Recent innovations in cost-effective polymer and paper hybrid microfluidic devices

Hybrid microfluidic systems that are composed of multiple different types of substrates have been recognized as a versatile and superior platform, which can draw benefits from different substrates while avoiding their limitations. This review article introduces the recent innovations of different types of low-cost hybrid microfluidic devices, particularly focusing on cost-effective polymer- and paper-based hybrid microfluidic devices. In this article, the fabrication of these hybrid microfluidic devices is briefly described and summarized. We then highlight various hybrid microfluidic systems, including polydimethylsiloxane (PDMS)-based, thermoplastic-based, paper/polymer hybrid systems, as well as other emerging hybrid systems (such as thread-based). The special benefits of using these hybrid systems have been summarized accordingly. A broad range of biological and biomedical applications using these hybrid microfluidic devices are discussed in detail, including nucleic acid analysis, protein analysis, cellular analysis, 3D cell culture, organ-on-a-chip, and tissue engineering. The perspective trends of hybrid microfluidic systems involving the improvement of fabrication techniques and broader applications are also discussed at the end of the review.

Triboelectric Nanogenerators for Therapeutic Electrical Stimulation

Current solutions developed for the purpose of in and on body (IOB) electrical stimulation (ES) lack autonomous qualities necessary for comfortable, practical, and self-dependent use. Consequently, recent focus has been placed on developing self-powered IOB therapeutic devices capable of generating therapeutic ES for human use. With the recent invention of the triboelectric nanogenerator (TENG), harnessing passive human biomechanical energy to develop self-powered systems has allowed for the introduction of novel therapeutic ES solutions. TENGs are especially effective at providing ES for IOB therapeutic systems given their bioconformability, low cost, simple manufacturability, and self-powering capabilities. Due to the key role of naturally induced electrical signals in many physiological functions, TENG-induced ES holds promise to provide a novel paradigm in therapeutic interventions. The aim here is to detail research on IOB TENG devices applied for ES-based therapy in the fields of regenerative medicine, neurology, rehabilitation, and pharmaceutical engineering. Furthermore, considering TENG-produced ES can be measured for sensing applications, this technology is paving the way to provide a fully autonomous personalized healthcare system, capable of IOB energy generation, sensing, and therapeutic intervention. Considering these grounds, it seems highly relevant to review TENG-ES research and applications, as they could constitute the foundation and future of personalized healthcare.

Cellulose nanocrystals in cancer diagnostics and treatment

Cancer is currently a major threat to public health, being among the principal causes of death to the global population. With carcinogenesis mechanisms, cancer invasion, and metastasis remaining blurred, cancer diagnosis and novel drug delivery approaches should be developed urgently to enable management and treatment. A dream break-through would be a non-invasive instantaneous monitoring of cancer initiation and progression to fast-track diagnosis for timely specialist treatment decisions. These innovations would enhance the established treatment protocols, unlimited by evasive biological complexities during tumorigenesis. It is therefore contingent that emerging and future scientific technologies be equally biased towards such innovations by exploiting the apparent properties of new developments and materials especially nanomaterials. CNCs as nanomaterials have undisputable physical and excellent biological properties that enhanced their interest as biomedical materials. This article therefore highlights CNCs utility in cancer diagnosis and therapy. Their extraction, properties, modification, in-vivo/in-vitro medical applications, biocompatibility, challenges and future perspectives are precisely discussed.

A Wirelessly Controlled Scalable 3D-Printed Microsystem for Drug Delivery

Here we present a 3D-printed, wirelessly controlled microsystem for drug delivery, comprising a refillable microreservoir and a phase-change peristaltic micropump. The micropump structure was inkjet-printed on the back of a printed circuit board around a catheter microtubing. The enclosure of the microsystem was fabricated using stereolithography 3D printing, with an embedded microreservoir structure and integrated micropump. In one configuration, the microsystem was optimized for murine inner ear drug delivery with an overall size of 19 × 13 × 3 mm3. Benchtop results confirmed the performance of the device for reliable drug delivery. The suitability of the device for long-term subcutaneous implantation was confirmed with favorable results of implantation of a microsystem in a mouse for six months. The drug delivery was evaluated in vivo by implanting four different microsystems in four mice, while the outlet microtubing was implanted into the round window membrane niche for infusion of a known ototoxic compound (sodium salicylate) at 50 nL/min for 20 min. Real-time shifts in distortion product otoacoustic emission thresholds and amplitudes were measured during the infusion, demonstrating similar results with syringe pump infusion. Although demonstrated for one application, this low-cost design and fabrication methodology is scalable for use in larger animals and humans for different clinical applications/delivery sites.

Impact of Lipid/Magnesium Hydroxide Hybrid Nanoparticles on the Stability of Vascular Endothelial Growth Factor-Loaded PLGA Microspheres

The purpose of the present study is to characterize poly(d,l-lactide-co-glycolide) (PLGA) composite microcarriers for vascular endothelial growth factor (VEGF) delivery. To reduce the initial burst release and protect the bioactivity, VEGF is encapsulated in soybean l-α-phosphatidylethanolamine (PE) and l-α-phosphatidylcholine (PC) anhydrous reverse micelle (VEGF-RM) nanoparticles. Also, mesoporous nano-hexagonal Mg(OH)₂ nanostructure (MNS)-loaded PE/PC anhydrous reverse micelle (MNS-RM) nanoparticles are synthesized to suppress the induced inflammation of PLGA acidic byproducts and regulate the release profile. The flow-focusing microfluidic geometry platforms are used to fabricate different combinations of PLGA composite microspheres (PLGA-CMPs) with MNSs, MNS-RM, VEGF-RM, and native VEGF. The essential parameters of each formulation, such as release profiles, encapsulation efficacy, bioactivity, inflammatory response, and cytotoxicity, are investigated by in vitro and in vivo studies. The results indicate that generated acidic byproducts during the hydrolytic degradation process of PLGA can be buffered, and pH values inside and outside microspheres can remain steady during degradation by MNSs. Furthermore, the significant improvement in the stability of the encapsulated VEGF is confirmed by the bioactivity assay. In vitro release study shows that the VEGF initial burst release is well minimized in the present microcarriers. The present monodisperse PLGA-CMPs can be widely used in various tissue engineering and therapeutic applications.

Detector-Free Photothermal Bar-Chart Microfluidic Chips (PT-Chips) for Visual Quantitative Detection of Biomarkers

The volumetric bar-chart microfluidic chips (V-Chips) driven by chemical reaction-generated gas provide a promising platform for point-of-care (POC) visual biomarker quantitation. However, multiple limitations are encountered in conventional V-Chips, such as costly and complex chip fabrication, complicated chip assembly, and imprecise controllability of gas production. Herein, we introduced nanomaterial-mediated photothermal effects to V-Chips, and for the first time developed a new type of V-Chip, photothermal bar-chart microfluidic chip (PT-Chip), for visual quantitative detection of biochemicals without any bulky and costly analytical instruments. Immunosensing signals were converted to visual readout signals via photothermal effects, the on-chip bar-chart movements, enabling quantitative biomarker detection on a low-cost polymer hybrid PT-Chip with on-chip scale rulers. Four different human serum samples containing a prostate-specific antigen (PSA) as a model analyte were detected simultaneously using the PT-Chip, with a limit of detection of 2.1 ng/mL, meeting clinical diagnostic requirements. Although no conventional signal detectors were used, it achieved comparable detection sensitivity to absorbance measurements with a microplate reader. The PT-Chip was further validated by testing human whole blood without the color interference problem, demonstrating the good analytical performance of our method even in complex matrices and thus the potential to fill the gap in current clinical diagnostics that is incapable of testing whole blood. This new PT-Chip driven by nanomaterial-mediated photothermal effects opens a new horizon of microfluidic platforms for instrument-free diagnostics at the point-of-care.