Submicron structure in L-alpha-dipalmitoylphosphatidylcholine monolayers and bilayers probed with confocal, atomic force, and near-field microscopy

Molecular packing tunes the activity of Kluyveromyces lactis beta-galactosidase incorporated in Langmuir-Blodgett films

Functional consequences of constraining beta-Gal in bidimensional space were studied at defined molecular packing densities and constant topology. Langmuir-Blodgett films, LB15 and LB35 composed of dipalmitoyl phosphatidylcholine and K. lactis beta-Gal, were obtained by transferring Langmuir films (L) initially packed at 15 and 35 mN/m, respectively, to alkylated glasses. The beta-Gal-monolayer binding equilibrium, mainly the adsorption rate and affinity, depended on the initial monolayer's surface pressure (lower for higher pi i). At pi i = 15 and 35 mN/m, the surface excess (Gamma) followed downward parabolic and power-law tendencies, respectively, as a function of subphase protein concentration. Gamma values in L roughly reflected the protein surface density chemically determined in LBs (0-7.5 ng/mm2 at pi i = 0-35 mN/m and [beta-Gal] subphase = 0-100 microg/mL). The beta-Gal-catalyzed hydrolysis of o-nitrophenyl-galactopyranoside showed a Michaelian kinetics in solution as well as in LB15. KM, KM,LB15, Vmax, and Vmax,LB15 were 5.15 +/- 2.2 and 9.25 +/- 6 mM and 39.63 and 0.0096 +/- 0.0027 micromol/min/mg protein, respectively. The sigmoidal kinetics observed with LB35 was evaluated by Hill's model (K0.5 = 9.55 +/- 0.4 mM, Vmax,35 = 0.0021 micromol/min/mg protein, Hill coefficient n = 9) and Savageau's fractal model (fractal constant K f = 9.84 mM; reaction order for the substrate gs = 9.06 and for the enzyme ge = 0.62). Fractal reaction orders would reflect the fractal organization of the environment, demonstrated by AFM images, more than the molecularity of the reaction. Particular dynamics of the protein-lipid structural coupling in each molecular packing condition would have led to the different kinetic responses.

Combined scanning probe and total internal reflection fluorescence microscopy

Combining scanning probe and optical microscopy represents a powerful approach for investigating structure-function relationships and dynamics of biomolecules and biomolecular assemblies, often in situ and in real-time. This platform technology allows us to obtain three-dimensional images of individual molecules with nanometer resolution, while simultaneously characterizing their structure and interactions though complementary techniques such as optical microscopy and spectroscopy. We describe herein the practical strategies for the coupling of scanning probe and total internal reflection fluorescence microscopy along with challenges and the potential applications of such platforms, with a particular focus on their application to the study of biomolecular interactions at membrane surfaces.

Current perspectives in pulmonary surfactant--inhibition, enhancement and evaluation

Pulmonary surfactant (PS) is a complicated mixture of approximately 90% lipids and 10% proteins. It plays an important role in maintaining normal respiratory mechanics by reducing alveolar surface tension to near-zero values. Supplementing exogenous surfactant to newborns suffering from respiratory distress syndrome (RDS), a leading cause of perinatal mortality, has completely altered neonatal care in industrialized countries. Surfactant therapy has also been applied to the acute respiratory distress syndrome (ARDS) but with only limited success. Biophysical studies suggest that surfactant inhibition is partially responsible for this unsatisfactory performance. This paper reviews the biophysical properties of functional and dysfunctional PS. The biophysical properties of PS are further limited to surface activity, i.e., properties related to highly dynamic and very low surface tensions. Three main perspectives are reviewed. (1) How does PS permit both rapid adsorption and the ability to reach very low surface tensions? (2) How is PS inactivated by different inhibitory substances and how can this inhibition be counteracted? A recent research focus of using water-soluble polymers as additives to enhance the surface activity of clinical PS and to overcome inhibition is extensively discussed. (3) Which in vivo, in situ, and in vitro methods are available for evaluating the surface activity of PS and what are their relative merits? A better understanding of the biophysical properties of functional and dysfunctional PS is important for the further development of surfactant therapy, especially for its potential application in ARDS.

Atomic force microscopy studies of functional and dysfunctional pulmonary surfactant films. I. Micro- and nanostructures of functional pulmonary surfactant films and the effect of SP-A

Monolayers of a functional pulmonary surfactant (PS) can reach very low surface tensions well below their equilibrium value. The mechanism by which PS monolayers reach such low surface tensions and maintain film stability remains unknown. As shown previously by fluorescence microscopy, phospholipid phase transition and separation seem to be important for the normal biophysical properties of PS. This work studied phospholipid phase transitions and separations in monolayers of bovine lipid extract surfactant using atomic force microscopy. Atomic force microscopy showed phospholipid phase separation on film compression and a monolayer-to-multilayer transition at surface pressure 40-50 mN/m. The tilted-condensed phase consisted of domains not only on the micrometer scale, as detected previously by fluorescence microscopy, but also on the nanometer scale, which is below the resolution limits of conventional optical methods. The nanodomains were embedded uniformly within the liquid-expanded phase. On compression, the microdomains broke up into nanodomains, thereby appearing to contribute to tilted-condensed and liquid-expanded phase remixing. Addition of surfactant protein A altered primarily the nanodomains and promoted the formation of multilayers. We conclude that the nanodomains play a predominant role in affecting the biophysical properties of PS monolayers and the monolayer-to-multilayer transition.

Condensing and fluidizing effects of ganglioside GM1 on phospholipid films

Mixed monolayers of the ganglioside G(M1) and the lipid dipalmitoylphosphatidlycholine (DPPC) at air-water and solid-air interfaces were investigated using various biophysical techniques to ascertain the location and phase behavior of the ganglioside molecules in a mixed membrane. The effects induced by G(M1) on the mean molecular area of the binary mixtures and the phase behavior of DPPC were followed for G(M1) concentrations ranging from 5 to 70 mol %. Surface pressure isotherms and fluorescence microscopy imaging of domain formation indicate that at low concentrations of G(M1) (<25 mol %), the monolayer becomes continually more condensed than DPPC upon further addition of ganglioside. At higher G(M1) concentrations (>25 mol %), the mixed monolayer becomes more expanded or fluid-like. After deposition onto a solid substrate, atomic force microscopy imaging of these lipid monolayers showed that G(M1) and DPPC pack cooperatively in the condensed phase domain to form geometrically packed complexes that are more ordered than either individual component as evidenced by a more extended total height of the complex arising from a well-packed hydrocarbon tail region. Grazing incidence x-ray diffraction on the DPPC/G(M1) binary mixture provides evidence that ordering can emerge when two otherwise fluid components are mixed together. The addition of G(M1) to DPPC gives rise to a unit cell that differs from that of a pure DPPC monolayer. To determine the region of the G(M1) molecule that interacts with the DPPC molecule and causes condensation and subsequent expansion of the monolayer, surface pressure isotherms were obtained with molecules modeling the backbone or headgroup portions of the G(M1) molecule. The observed concentration-dependent condensing and fluidizing effects are specific to the rigid, sugar headgroup portion of the G(M1) molecule.

Lateral stress relaxation and collapse in lipid monolayers

Surfactants at air/water interfaces are often subjected to mechanical stresses as the interfaces they occupy are reduced in area. The most well characterized forms of stress relaxation in these systems are first order phase transitions from lower density to higher density phases. Here we study stress relaxation in lipid monolayers that occurs once chemical phase transitions have been exhausted. At these highly compressed states, the monolayer undergoes global mechanical relaxations termed collapse. By studying four different types of monolayers, we determine that collapse modes are most closely linked to in-plane rigidity. We characterize the rigidity of the monolayer by analyzing in-plane morphology on numerous length scales. More rigid monolayers collapse out-of-plane via a hard elastic mode similar to an elastic membrane, while softer monolayers relax in-plane by shearing.

Interaction of N-nitrosodiethylamine/bovine serum albumin complexes with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine monolayers at the air-water interface

We report the effect of N-nitrosodiethylamine (NDA) on the interaction between bovine serum albumin (BSA) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine monolayers (DPPC) at the air-water interface. We prepared aqueous solutions of NDA/BSA complexes maintaining a constant concentration of BSA of 1.49 x 10(-9) M and using NDA concentrations to obtain 2000, 4000, 6000, 12,500, and 25,000 NDA/BSA molar ratios. The hysteresis area and the compressional modulus of the compression-expansion cycles performed at different times were dependent on the NDA concentration. The cycles performed demonstrate the stability of the new phase of DPPC/BSA and DPPC/NDA/BSA monolayers. This was achieved probably because the BSA concentration used was lower than the one needed for BSA to inhibit the return of DPPC molecules to the interface. Results of the compressional modulus at the onset of the new phase, obtained around 17 mN/m, 15 min and 1, 3, 5, and 12 h after DPPC deposition, indicated that the 3.0 x 10(-6) M NDA concentration produced a more rigid film, probably due to the higher alpha-helix content of BSA. AFM images were obtained for DPPC/BSA and two DPPC/NDA/BSA complexes. Our images show that 12,500 NDA/BSA molecules were mostly adsorbed in the liquid condensed phase. However, BSA molecules were distributed more homogeneously.

Behaviour of bacterial division protein FtsZ under a monolayer with phospholipid domains

Assembly of the tubulin-like protein FtsZ at or near the cytoplasmic membrane is one of the earliest steps in division of bacteria such as Escherichia coli. Exactly what constitutes the site at which FtsZ acts is less clear. To investigate the influence of the membrane phospholipids on FtsZ localization and assembly, we have elaborated with the Langmuir technique a two-lipid monolayer made of dilauryl-phosphatidylethanolamine (DLPE) and dipalmitoyl-phosphatidylglycerol (DPPG). This monolayer comprised stable condensed domains in an expanded continuous phase. In the presence of GTP, FtsZ assembly disrupts the condensed domains within 5 min. After several hours, with or without GTP, FtsZ assembled into large aggregates at the domain interface. We suggest that the GTP-induced polymerization of FtsZ is coupled to the association of FtsZ protofilaments with domain interfaces.

Wettability and topography of phospholipid DPPC multilayers deposited by spin-coating on glass, silicon, and mica slides

The surface free energy of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) layers deposited on glass, silicon, or mica by the spin-coating method was estimated. For this purpose, the advancing and receding contact angles of water, formamide, and diiodomethane were measured, and then two concepts of the interfacial interactions were applied. In the contact angle hysteresis approach, the apparent total surface free energy is calculated from the advancing and receding contact angles of the probe liquids, and in the Lifshitz-van der Waals/acid-base approach, the total surface free energy is calculated from previously determined components of the energy, that is, the apolar Lifshitz-van der Waals and the polar electron-donor and electron-acceptor, which are calculated from the advancing contact angles of the probe liquids alone. Comparison of the results obtained using these two approaches provided more information about changes in the hydrophobic/hydrophilic character of the DPPC layers and, simultaneously, a verification of the approaches. Moreover, the roughness and topography of the investigated layers were also examined by atomic force microscopy measurements. The hydrophilic character of the DPPC layers decreased if up to 0.5 mg of DPPC/mL was used to deposit on the substrates by the spin-coating method. Then it increased and leveled off if up to 2-2.5 mg of DPPC/mL was used. The changes in the energy were correlated with the changes in topography of the surfaces.

Phospholipase D activity is regulated by product segregation and the structure formation of phosphatidic acid within model membranes

Phospholipase D from Streptomyces chromofuscus (scPLD) hydrolyzes phosphatidylcholines (PC) to produce choline and phosphatidic acid (PA), a lipid messenger molecule within biological membranes. To scrutinize the influence of membrane structure on scPLD activity, three different substrate-containing monolayers are used as model systems: pure dipalmitoylphosphatidylcholine (DPPC) as well as equimolar mixtures of DPPC/n-hexadecanol (C(16)OH) and DPPC/dipalmitoylglycerol (DPG). The activity of scPLD toward these monolayers is tested by infrared reflection-absorption spectroscopy and exhibits different dependencies on surface pressure. For pure DPPC, the catalytic turnover drastically drops above 20 mN/m. On addition of C(16)OH, this strong decrease starts at 5 mN/m. For the DPPC/DPG system, the reaction yield linearly decreases between 5 and 25 mN/m. The difference in scPLD activity is correlated to the phase state of the monolayers as examined by x-ray diffraction, Brewster angle microscopy, and atomic force microscopy. Because the additives C(16)OH and DPG mediate the miscibility of PC and PA, only a basal activity of scPLD is observed toward the mixed systems at higher surface pressures. At pure DPPC monolayers, scPLD is activated after the segregation of initially formed PA. Furthermore, scPLD is inhibited when the lipids in the PA-rich domains adopt an upright orientation. This phenomenon offers a self-regulating mechanism for the concentration of the second messenger PA within biological membranes.

Interfacial organizations of gel phospholipid and cholesterol in bovine lung surfactant films

Pulmonary surfactants stabilize the lung by way of reducing surface tension at the air-lung interface of the alveolus. 31P NMR, thin-layer chromatography, and electrospray ionization mass spectroscopy of bovine lipid extract surfactant (BLES) confirmed dipalmitoylphosphatidylcholine (DPPC) to be the major phospholipid species, with significant amounts of palmitoyl-oleoylphosphatidylcholine, palmitoyl-myristoylphosphatidylcholine, and palmitoyl-oleoylphosphatidylglycerol. BLES and DPPC spread at the air-water interface were studied through surface pressure area, fluorescence, and Brewster angle microscopy measurements. Langmuir-Blodgett films of monomolecular films, deposited on mica, were characterized by atomic force microscopy. BLES films displayed shape, size, and vertical height profiles distinct from those of DPPC alone. Calcium ions in the subphase altered BLES film domain structure. The addition of cholesterol (4 mol %) resulted in the destabilization of compressed BLES films at higher surface pressures (>40 mN m-1) and the formation of multilayered structures, apparently consisting of stacked monolayers. The studies suggested potential roles for individual surfactant lipid components in supramolecular arrangements, which could be the contributing factors in pulmonary surfactant to attain low surface tension at the air-water interface.

Influence of lipidation of GBV-C/HGV NS3 (513-522) and (505-514) peptide sequences on its interaction with mono and bilayers

Two decapeptide fragments of the non-structural hepatitis G NS3 protein (GBV-C/HGV), 513-522 (RGRTGRGRSG) and 505-514 (SAELSMQRRG), as well as their palmitoylated derivatives were synthesized. The physico-chemical properties of the peptides were analyzed in both the absence and presence of the zwitterionic 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), the negative 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DPPG) and the positive 1,2-dioeloyl-3-trimethylammonium-propane (DOTAP) lipid monolayers. Based on their high hydrophilic properties, neither parent peptide presented surface activity and their incorporation into lipid monolayers was low. In contrast, their palmitoylated derivatives showed concentration-dependent surface activity and could be inserted into lipid monolayers to varying degrees depending on their sequence. Compression isotherms showed that the presence of palmitoylated peptides in the subphase resulted in a molecular arrangement less condensed than that corresponding to the pure phospholipid. In concordance with the monolayer results, differential scanning calorimetry (DSC) demonstrated that the parent peptides did not have any effect on the thermograms, while the palmitoylated derivatives affected the thermotropic properties of DPPC bilayers.

In situ scanning probe microscopy studies of tetanus toxin-membrane interactions

Despite the considerable information available with regards to the structure of the clostridial neurotoxins, and their inherent threat as biological warfare agents, the mechanisms underpinning their interactions with and translocation through the cell membrane remain poorly understood. We report herein the results of an in situ scanning probe microscopy study of the interaction of tetanus toxin C-fragment (Tet C) with supported planar lipid bilayers containing the ganglioside receptor G(T1b). Our results show that Tet C preferentially binds to the surface of fluid phase domains within biphasic membranes containing G(T1b) and that with an extended incubation period these interactions lead to dramatic changes in the morphology of the lipid bilayer, including the formation of 40-80 nm diameter circular cavities. Combined atomic force microscopy/total internal reflection fluorescence microscopy experiments confirmed the presence of Tet C in the membrane after extended incubation. These morphological changes were found to be dependent upon the presence of G(T1b) and the solution pH.

Direct measurement of forces between a colloidal particle and a phospholipid bilayer

Colloidal interaction forces between a silica particle and a solid-supported Langmuir-Schaefer phospholipid bilayer were directly measured using a gradient optical trap and evanescent wave light scattering. A small custom-built Langmuir trough was integrated with an optical trapping microscope to allow force measurements on a single particle within the subphase of the trough after the dip of the substrate was completed. The novel method allows the force measurements to be conducted without transferring the substratum across an air/water interface. The fluctuating particle position near the bilayer was tracked by evanescent wave light scattering to determine the deflection due to surface forces, and the relaxation time of particle fluctuations was measured to simultaneously determine the viscous forces. Measured equilibrium and viscous force-distance profiles of silica microspheres with diameters of 1 and 5 microm on bilayers of dipalmitoyl phosphatidyl choline (DPPC) were markedly different than force-distance on bare mica and DPPC monolayers under the same electrolyte conditions.

An atomic force microscope study of thermal behavior of phospholipid monolayers on mica

We observed by using atomic force microscope (AFM) phospholipid (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) monolayers on mica being annealed and cooled to a selection of temperatures through steps of 2-4 degrees C/min. The annealed phospholipid monolayers started to disappear at 45-50 degrees C and disappeared completely above 60-63 degrees C under AFM observation. The phospholipid monolayers reformed when the samples were cooled below 60 degrees C and developed from fractal into compact monolayer films with decreasing temperatures. Simultaneously the height of the reformed phospholipid films also increased with decreasing temperatures from 0.4 nm to the value before annealing. The observed thermal features are attributed to a phase-transition process that upon heating to above 45-50 degrees C, the lipids condensed in the monolayers transform into a low-density expanded phase in which the lipids are invisible to AFM, and the transformation continues and completes at 60-63 degrees C. The lipid densities of the expanded phase inferred from the dissociated area of the condensed phase are observed to be a function of the temperature. The behavior contrasts with a conventional first-order phase transition commonly seen in the Langmuir films. The temperature-dependent height and shape of the reformed phospholipid films during cooling are argued to arise from the adjustment of the packing and molecular tilting (with respect to the mica surface) of the phospholipids in order to accommodate more condensed phospholipids.

Mechanisms of antimicrobial peptide action: Studies of indolicidin assembly at model membrane interfaces by in situ atomic force microscopy

We report here on an in situ atomic force microscopy study of the interaction of indolicidin, a tryptophan-rich antimicrobial peptide, with phase-segregated zwitterionic DOPC/DSPC supported planar bilayers. By varying the peptide concentration and bilayer composition through the inclusion of anionic lipids (DOPG or DSPG), we found that indolicidin interacts with these model membranes in one of two concentration-dependent manners. At low peptide concentrations, indolicidin forms an amorphous layer on the fluid domains when these domains contain anionic lipids. At high peptide concentrations, indolicidin appears to initiate a lowering of the gel-phase domains independent of the presence of an anionic lipid. Similar studies performed using membrane-raft mimetic bilayers comprising 30mol% cholesterol/1:1 DOPC/egg sphingomyelin revealed that indolicidin does not form a carpet-like layer on the zwitterionic DOPC domains at low peptide concentrations and does not induce membrane lowering of the liquid-ordered sphingomyelin/cholesterol-rich domains at high peptide concentration. Simultaneous AFM-confocal microscopy imaging did however reveal that indolicidin preferentially inserts into the fluid-phase DOPC domains. These data suggest that the indolicidin-membrane association is influenced greatly by specific electrostatic interactions, lipid fluidity, and peptide concentration. These insights provide a glimpse into the mechanism of the membrane selectivity of antibacterial peptides and suggest a powerful correlated approach for characterizing peptide-membrane interactions.

Galactosylceramide domain microstructure: impact of cholesterol and nucleation/growth conditions

Galactosylceramide (GalCer), a glycosphingolipid, is believed to exist in the extracellular leaflet of cell membranes in nanometer-sized domains or rafts. The local clustering of GalCer within rafts is thought to facilitate the initial adhesion of certain viruses, including HIV-1, and bacteria to cells through multivalent interactions between receptor proteins (gp120 for HIV-1) and GalCer. Here we use atomic force microscopy (AFM) to study the effects of cholesterol on solid-phase GalCer domain microstructure and miscibility with a fluid lipid 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) in supported lipid bilayers. Using "slow-cooled vesicle fusion" to prepare the supported lipid bilayers, we were able to overcome the nonequilibrium effects of the substrate (verified by comparison to results for giant unilamellar vesicles) and accurately quantify the dramatic effect of cholesterol on the GalCer domain surface area/perimeter ratio (A(D)/P) and DLPC-GalCer miscibility. We compare these results to a supported lipid bilayer system in which the bilayer is rapidly cooled (nonequilibrium conditions), "quenched vesicle fusion", and find that the microstructures are remarkably similar above a cholesterol mol fraction of approximately 0.06. We determined that GalCer domains were contained in one leaflet distal to the mica substrate through qualitative binding experiments with Trichosanthes kirilowii agglutinin (TKA), a galactose-specific lectin, and AFM of Langmuir-Blodgett deposited GalCer/DLPC supported lipid bilayers. In addition, GalCer domains in bilayers containing cholesterol rearranged upon tip-sample contact. Our results further serve to clarify why discrepancies exist between different model membrane systems and between model membranes and cell membranes. In addition, these results offer new insight into the effect of cholesterol and surrounding lipid on domain microstructure and behavior. Finally, our observations may be pertinent to cell membrane structure, dynamics, and HIV infection.

Correlated fluorescence-atomic force microscopy of membrane domains: structure of fluorescence probes determines lipid localization

Coupling atomic force microscopy (AFM) with high-resolution fluorescence microscopy is an attractive means of identifying membrane domains by both physical topography and fluorescence. We have used this approach to study the ability of a suite of fluorescent molecules to probe domain structures in supported planar bilayers. These included BODIPY-labeled ganglioside, sphingomyelin, and three new cholesterol derivatives, as well as NBD-labeled phosphatidylcholine, sphingomyelin, and cholesterol. Interestingly, many fluorescent lipid probes, including derivatives of known raft-associated lipids, preferentially partitioned into topographical features consistent with nonraft domains. This suggests that the covalent attachment of a small fluorophore to a lipid molecule can abolish its ability to associate with rafts. In addition, the localization of one of the BODIPY-cholesterol derivatives was dependent on the lipid composition of the bilayer. These data suggest that conclusions about the identification of membrane domains in supported planar bilayers on the basis of fluorescent lipid probes alone must be interpreted with caution. The combination of AFM with fluorescence microscopy represents a more rigorous means of identifying lipid domains in supported bilayers.

Lipid asymmetry in DLPC/DSPC-supported lipid bilayers: a combined AFM and fluorescence microscopy study

A fundamental attribute of cell membranes is transmembrane asymmetry, specifically the formation of ordered phase domains in one leaflet that are compositionally different from the opposing leaflet of the bilayer. Using model membrane systems, many previous studies have demonstrated the formation of ordered phase domains that display complete transmembrane symmetry; but there have been few reports on the more biologically relevant asymmetric membrane structures. Here we report on a combined atomic force microscopy and fluorescence microscopy study whereby we observe three different states of transmembrane symmetry in phase-separated supported lipid bilayers formed by vesicle fusion. We find that if the leaflets differ in gel-phase area fraction, then the smaller domains in one leaflet are in registry with the larger domains in the other leaflet and the system is dynamic. In a presumed lipid flip-flop process similar to Ostwald ripening, the smaller domains in one leaflet erode away whereas the large domains in the other leaflet grow until complete compositional asymmetry is reached and remains stable. We have quantified this evolution and determined that the lipid flip-flop event happens most frequently at the interface between symmetric and asymmetric DSPC domains. If both leaflets have identical area fraction of gel-phase, gel-phase domains are in registry and are static in comparison to the first state. The stability of these three DSPC domain distributions, the degree of registry observed, and the domain immobility have biological significance with regards to maintenance of lipid asymmetry in living cell membranes, communication between inner leaflet and outer leaflet, membrane adhesion, and raft mobility.

Probing the properties of lipopolysaccharide monolayers and their interaction with the antimicrobial peptide polymyxin B by atomic force microscopy

In contrast to the majority of all known cell types, Gram-negative bacteria have a second membrane, the outer membrane, which is an asymmetric bilayer composed of a phospholipid inner leaflet and a glycolipid outer leaflet. The glycolipid layer, in most cases being composed of a lipopolysaccharide (LPS), is the first target for antimicrobial agents. To get a basic understanding of the membrane-forming properties of LPS, we reconstituted monolayers of deep rough mutant LPS from Salmonella enterica serova Minnesota (R595 LPS), its lipid A moiety, and of the synthetic tetraacyl compound 406 (resembling the biosynthetic lipid A precursor IVa) at the air-water interface of a film balance. The liquid-expanded (LE) and liquid-condensed (LC) domains in the coexisting region were investigated with epifluorescence and, after transferring the monolayer onto mica, as a Langmuir-Blodgett film, with atomic force microscopy (AFM). The fluorescence and the AFM images showed identical domain structure. The higher resolution of the AFM images, however, contained more topographic details. Different heights and adhesion forces between the LE and LC domains could be observed. Differences in the adhesion forces between the AFM tip and the sample were determined in the repulsive and the attractive dynamic scanning modes, demonstrating the importance of a careful interpretation of height images. We propose that an increase in the lateral pressure causing the LE-LC transition of the monolayers leads to a reorientation of the molecules due to a tilt angle between the alkyl chains and the diglucosamine backbone. LPS monolayers have been utilized as a simplified reconstitution model of the outer membrane to study the interaction with antimicrobial agents. We investigated the action of the polycationic peptide polymyxin B (PMB) and found dramatic influences on the domain structures.

Influence of a fluorescent probe on the nanostructure of phospholipid membranes: dipalmitoylphosphatidylcholine interfacial monolayers

Monolayers of dipalmitoylphosphatidylcholine (DPPC), both in the absence and in the presence of 1% (mol/mol) of a fluorescent phospholipid probe, have been spread at the air-liquid interface of a surface balance, compressed up to pressures in the liquid-expanded/liquid-condensed plateau of the isotherm, transferred onto mica supports, and analyzed by scanning force microscopy (SFM). Supported DPPC films showed micrometer-sized condensed domains with morphology and size that were entirely analogous to those observed in situ at the air-liquid interface by epifluorescence microscopy. The analysis by SFM, however, allowed the study and comparison of monolayers in the absence and in the presence of the fluorescent marker. This analysis revealed that the presence of dye reduced by 10-20% the total amount of the liquid-condensed phase in the DPPC films. The presence of the dye also decreased the mechanical stability of the film and increased the time required for the monolayer to equilibrate. The resolution of SFM permitted the determination that the structures of both the liquid-expanded and the liquid-condensed regions of DPPC films were heterogeneous at the nanometer scale. Liquid-condensed DPPC microdomains contained nanoholes covering 4-8% of their area whereas 60-80% of the surface detected as liquid-expanded by fluorescence microscopy consisted of a condensed-like framework of nanodomains. The total area, the shape of the nanodomains, and their interconnectivity were affected by the presence of the probe, suggesting that care must be taken when studying the structure, especially at the nanometer scale, and properties of model lipid films in the presence of extrinsic probes.

Spatial Resolution Improvement of Scanning Microscopy Based on Thermal Lens Spectroscopy with a Total-Internal-Reflection Arrangement

In scanning microscopy by total internal reflection with thermal lens spectroscopy, its spatial resolution depends on the distance between the sample and a converging lens, which corresponds to the objective lens in an ordinary optical microscope. It was found that the resolution was best when the signal induced by the thermal lens effect was maximum. The distance was precisely adjusted by monitoring the signal intensity, and the resolution became twice better than that previously reported. Using a shorter focal-length lens, a resolution of 1.9 microm was attained.

New dimension in nano-imaging: breaking through the diffraction limit with scanning near-field optical microscopy

In recent years scanning near-field optical microscopy (SNOM) has developed into a powerful surface analytical technique for observing specimens with lateral resolution equal to or even better than 100 nm. A large number of applications, from material science to biology, have been reported. In this paper, two different kinds of near-field optical microscopy, aperture and scattering-type SNOM, are reviewed together with recent studies in surface analysis and biology. Here, near-field optical techniques are discussed in comparison with related methods, such as scanning probe and standard optical microscopy, with respect to their specific advantages and fields of application.

Effect of pulmonary surfactant protein SP-B on the micro- and nanostructure of phospholipid films

Monolayers of dipalmitoylphosphatidylcholine (DPPC) and DPPC/dipalmitoylphosphatidylglycerol (DPPG) (7:3, w/w) in the absence or in the presence of 2, 5, 10, or 20 weight percent of porcine surfactant protein SP-B were spread at the air-liquid interface of a surface balance, compressed up to surface pressures in the liquid-expanded/liquid-condensed (LE-LC) plateau of the isotherm, transferred onto mica supports, and analyzed by scanning force microscopy. In the absence of protein, the films showed micrometer-sized condensed domains with morphology and size that were analogous to those observed in situ at the air-liquid interface by epifluorescence microscopy. Scanning force microscopy permits examination of the coexisting phases at a higher resolution than previously achieved with fluorescent microscopy. Both LE and LC regions of DPPC films were heterogeneous in nature. LC microdomains contained numerous expanded-like islands whereas regions apparently liquid-expanded were covered by a condensed-like framework of interconnected nanodomains. Presence of increasing amounts of pulmonary surfactant protein SP-B affected the distribution of the LE and LC regions of DPPC and DPPC/DPPG films both at the microscopic and the nanoscopic level. The condensed microdomains became more numerous but their size decreased, resulting in an overall reduction of the amount of total LC phase in both DPPC and DPPC/DPPG films. At the nanoscopic level, SP-B also caused a marked reduction of the size of the condensed-like nanodomains in the LE phase and an increase in the length of the LE/LC interface. SP-B promotes a fine nanoscopic framework of lipid and lipid-protein nanodomains that is associated with a substantial mechanical resistance to film deformation and rupture as observed during film transference and manipulation. The effect of SP-B on the nanoscopic structure of the lipid films was greater in DPPC/DPPG than in pure DPPC films, indicating additional contributions of electrostatic lipid-protein interactions. The alterations of the nanoscopic structures of phospholipid films by SP-B provide the structural framework for the protein simultaneously sustaining structural stability as well as dynamical flexibility in surfactant films at the extreme conditions imposed by the respiratory mechanics. SP-B also formed segregated two-dimensional clusters that were associated with the boundaries between LC microdomains and the LE regions of DPPC and DPPC/DPPG films. The presence of these clusters at protein-to-lipid proportions above 2% by weight suggests that the concentration of SP-B in the surfactant lipid-protein complexes may be close to the solubility limit of the protein in the lipid films.

Aggregation of puroindoline in phospholipid monolayers spread at the air-liquid interface

Puroindolines, cationic and cystine-rich low molecular weight lipid binding proteins from wheat seeds, display unique foaming properties and antimicrobial activity. To unravel the mechanism involved in these properties, the interaction of puroindoline-a (PIN-a) with dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG) monolayers was studied by coupling Langmuir-Blodgett and imaging techniques. Compression isotherms of PIN-a/phospholipid monolayers and adsorption of PIN-a to lipid monolayers showed that the protein interacted strongly with phospholipids, especially with the anionic DPPG. The electrostatic contribution led to the formation of a highly stable lipoprotein monolayer. Confocal laser scanning microscopy and atomic force microscopy showed that PIN-a was mainly inserted in the liquid-expanded phase of the DPPC, where it formed an aggregated protein network and induced the fusion of liquid-condensed domains. For DPPG, the protein partitioned in both the liquid-expanded and liquid-condensed phases, where it was aggregated. The extent of protein aggregation was related both to the physical state of phospholipids, i.e., condensed or expanded, and to the electrostatic interactions between lipids and PIN-a. Aggregation of PIN-a at air-liquid and lipid interfaces could account for the biological and technological properties of this wheat lipid binding protein.

Development of a scanning microscopy by total internal reflection coupled with thermal lens spectroscopy

Non-destructive measurement of a small region on a solid/liquid interface is of great importance in physical chemistry and biochemistry, especially in the research of thin films and cell membranes. Optical methods for surface analysis with high lateral resolution are suitable methods for monitoring them. We now report a new scanning optical microscopic method to which total internal reflection coupled with a thermal lens technique was introduced. Its lateral resolution was estimated both experimentally and theoretically. To experimentally estimate the resolution, the grid patterns of thin photoresist films with well-defined lateral structures were measured. The experimental resolution was about 45 microm, which was almost same as the diameter of the excitation beam at a glass/sample interface. From this result, it was verified that this new scanning microscopy ideally worked.

Effect of Acute Lung Injury on Structure and Function of Pulmonary Surfactant Films

The structural and functional alterations in pulmonary surfactant that occur during acute lung injury were studied using rat lung surfactant large aggregates (LA) isolated from normal nonventilated lungs (N), and from standard ventilated (V) and injuriously ventilated (IV) excised lungs. N lungs inflated significantly better than IV lungs, with V lungs intermediate. Although IV LA phosphatidylcholine levels were unchanged, cholesterol and protein were elevated. V LA exhibited PC/cholesterol and PC/protein ratios intermediate between N and IV. In contrast to total cholesterol and protein levels, these ratios were not significantly different from IV LA. N and V LA, but not IV LA, adsorbed rapidly and were able to generate surface pressures (pi) near 70 mN/m during surface area reduction at 37 degrees C on a captive bubble tensiometer. Langmuir-Wilhelmy surface balance studies at 23 degrees C showed N LA films consistently attained pi approaching 70 mN/m during ten compression-expansion cycles. IV films were less effective and failed to achieve high pi consistently after the sixth cycle. V films were intermediate. Epifluorescence studies revealed compression of adsorbed N LA films formed well-defined liquid-condensed (LC) domains, but fewer, smaller domains were observed with IV films and, to a lesser extent, V films. Atomic force microscopy on Langmuir-Blodgett N films transferred at pi = 30 mN/m showed high, well-defined LC domains. IV films showed thinner, intermediate height, possibly fluid domains, which contain large numbers of small higher domains with heights corresponding to LC domains. V films were intermediate. We conclude that acute lung injury induced by hyperventilation, and to a lesser extent standard ventilation, of excised lungs alters surfactant surface activity and the ability of natural surfactant to form surface structures at the air-water interface.

Simultaneous in situ total internal reflectance fluorescence/atomic force microscopy studies of DPPC/dPOPC microdomains in supported planar lipid bilayers

In situ simultaneous total internal reflectance fluorescence and in situ scanning probe microscopy performed on a phase-segregated supported planar lipid bilayer enabled direct in situ real-time correlated topographical and fluorescence images of nanometer-sized gel and fluid-phase lipid domains, presaging future in situ studies of membrane protein assemblies by single molecule imaging.

The lateral diffusion of selectively aggregated peptides in giant unilamellar vesicles

We have systematically investigated the effect of aggregation of a transmembrane peptide on its diffusion in dimyristoylphosphatidylcholine and in palmitoyloleoylphosphatidylcholine model membranes. The hydrophobic segment of the b subunit from E. coli F(1)F(0)-ATP synthase was modified with a histidine tag at the carbonyl terminus and was aggregated selectively by using a series of multivalent, dendritic chelating agents with nitrilotriacetic acid functional groups. Peptide complexes ranging from monomers to hexamers were formed and studied in giant unilamellar vesicles. The rate of diffusion for the transmembrane peptide complexes were found to depend on the size of the complex. The results agree with predictions from the free area model for monomers and dimers, and the hydrodynamic continuum model for tetramers, pentamers, and hexamers. Comparisons with diffusion of lipids confirm that the diffusion of a transmembrane peptide is enhanced by coupling of density fluctuations between the two monolayers.

Obstructed diffusion in phase-separated supported lipid bilayers: a combined atomic force microscopy and fluorescence recovery after photobleaching approach

Proteins and other macromolecules are believed to hinder molecular lateral diffusion in cellular membranes. We have constructed a well-characterized model system to better understand how obstacles in lipid bilayers obstruct diffusion. Fluorescence recovery after photobleaching was used to measure the lateral diffusion coefficient in single supported bilayers composed of mixtures of 1,2-dilauroylphosphotidylcholine (DLPC) and 1,2-distearoylphosphotidylcholine (DSPC). Because these lipids are immiscible and phase separate at room temperature, a novel quenching technique allowed us to construct fluid DLPC bilayers containing small disk-shaped gel-phase DSPC domains that acted as obstacles to lateral diffusion. Our experimental setup enabled us to analyze the same samples with atomic force microscopy and exactly characterize the size, shape, and number of gel-phase domains before measuring the obstacle-dependent diffusion coefficient. Lateral obstructed diffusion was found to be dependent on obstacle area fraction, size, and geometry. Analysis of our results using a free area diffusion model shows the possibility of unexpected long-range ordering of fluid-phase lipids around the gel-phase obstacles. This lipid ordering has implications for lipid-mediated protein interactions in cellular membranes.

Ripples and the formation of anisotropic lipid domains: imaging two-component supported double bilayers by atomic force microscopy

Direct visualization of the fluid-phase/ordered-phase domain structure in mica-supported bilayers composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine/1,2-distearoyl-sn-glycero-3-phosphocholine mixtures is performed with atomic force microscopy. The system studied is a double bilayer supported on a mica surface in which the top bilayer (which is not in direct contact with the mica) is visualized as a function of temperature. Because the top bilayer is not as restricted by the interactions with the surface as single supported bilayers, its behavior is more similar to a free-standing bilayer. Intriguing straight-edged anisotropic fluid-phase domains were observed in the fluid-phase/ordered-phase coexistence temperature range, which resemble the fluid-phase/ordered-phase domain patterns observed in giant unilamellar vesicles composed of such phospholipid mixtures. With the high resolution provided by atomic force microscopy, we investigated the origin of these anisotropic lipid domain patterns, and found that ripple phase formation is directly responsible for the anisotropic nature of these domains. The nucleation and growth of fluid-phase domains are found to be directed by the presence of ripples. In particular, the fluid-phase domains elongate parallel to the ripples. The results show that ripple phase formation may have implications for domain formation in biological systems.

Solubility of amphiphiles in membranes: influence of phase properties and amphiphile head group

The solubilities of two fluorescent lipid amphiphiles with comparable apolar structures and different polar head groups, NBD-hexadecylamine and RG-tetradecylamine (or -octadecylamine), were compared in lipid bilayers at a molar ratio of 1/50 at 23 degrees C. Bilayers examined were in the solid, liquid-disordered, or liquid-ordered phases. While NBD-hexadecylamine was soluble in all the examined bilayer membrane phases, RG-tetradecylamine was stably soluble only in the liquid-disordered phase. RG-tetradecylamine insolubility in solid and liquid-ordered phases manifests itself as an aggregation of the amphiphile over a period of several days and the kinetics of aggregation were studied. Solubility of these amphiphiles in the different phases examined seems to be related to the dipole moment of the amphiphile (in particular, of the polar fluorophore) and its orientation relative to the dipolar potential of the membrane. We propose that amphiphilic molecules inserted into membranes (including lipid-attached proteins) partition into different coexisting membrane phases based upon: (1) nature of the apolar structure (chain length, degree of saturation, and chain branching as has been proposed in the literature); (2) magnitude and orientation of the dipole moment of the polar portion of the molecules relative to the membrane dipolar potential; and (3) hydration forces that are a consequence of ordering of water dipoles at the membrane surface.

Protein structural changes induced by their uptake at interfaces

For insertion into lipidic media, most hydrosoluble proteins must cross the lipid-water interface and thus undergo conformational transitions. According to their chemical sequences these transitions may be restricted to changes involving only the tertiary structure, while for other proteins this environment modification will induce drastic changes such as the unfolding of large domains. The structural transitions are mainly governed by the presence of hydrophobic domains and/or by the existence of induced amphipathic properties.

A near-field microscopy study of submicron domain structure in a model lung surfactant monolayer

The submicron domain structure of coexisting liquid condensed (LC) and liquid expanded (LE) phases in monolayers composed of palmitic acid and 20 wt% of a lung surfactant protein B fragment has been investigated. Near-field microscopy was used to simultaneously measure topography and fluorescence images of monolayers that were prepared at a surface pressure of 15 mN/m and a temperature of 22 degrees C. The use of a fluorescently tagged peptide allowed for unambiguous determination of the peptide location in the two-component system. The LC and LE phases in the monolayers are measured on the submicron length scale. A 6-11 A height difference between the LC and LE phases was evident in the height images. Gradual transitions between the LC and LE domains were observed across a 1.3 microm length scale in the near-field fluorescence images, but were significantly sharper in the simultaneously collected topography images and in the separately measured AFM images. These results may reflect the occurrence of peptide encroachment into the LC domains.

The size of lipid rafts: an atomic force microscopy study of ganglioside GM1 domains in sphingomyelin/DOPC/cholesterol membranes

Atomic force microscopy has been used to study the distribution of ganglioside GM1 in model membranes composed of ternary lipid mixtures that mimic the composition of lipid rafts. The results demonstrate that addition of 1% GM1 to 1:1:1 sphingomyelin/dioleoylphosphatidylcholine/cholesterol monolayers leads to the formation of small ganglioside-rich microdomains (40-100 nm in size) that are localized preferentially in the more ordered sphingomyelin/cholesterol-rich phase. With 5% GM1 some GM1 microdomains are also detected in the dioleoylphosphatidylcholine-rich phase. A similar preferential localization of GM1 in the ordered phase is observed for bilayers with the same ternary lipid mixture in the upper leaflet. The small GM1-rich domains observed in these experiments are similar to the sizes for lipid rafts in natural membranes but considerably smaller than the ordered bilayer domains that have been shown to be enriched in GM1 in recent fluorescence microscopy studies of lipid bilayers. The combined data from a number of studies of model membranes indicate that lateral organization occurs on a variety of length scales and mimics many of the properties of natural membranes.

Segregation of saturated chain lipids in pulmonary surfactant films and bilayers

The physical properties of organized system (bilayers and monolayers at the air water interface) composed of bovine lipid extract surfactant (BLES) were studied using correlated experimental techniques. 6-Dodecanoyl-2-dimethylamino-naphthalene (LAURDAN)-labeled giant unilamelar vesicles (mean diameter approximately 30 microm) composed of BLES were observed at different temperatures using two-photon fluorescence microscopy. As the temperature was decreased, dark domains (gel-like) appeared at physiological temperature (37 degrees C) on the surface of BLES giant unilamelar vesicles. The LAURDAN two-photon fluorescent images show that the gel-like domains span the lipid bilayer. Quantitative analysis of the LAURDAN generalized polarization function suggests the presence of a gel/fluid phase coexistence between 37 degrees C to 20 degrees C with low compositional and energetic differences between the coexisting phases. Interestingly, the microscopic scenario of the phase coexistence observed below 20 degrees C shows different domain's shape compared with that observed between 37 degrees C to 20 degrees C, suggesting the coexistence of two ordered but differently organized lipid phases on the bilayer. Epifluorescence microscopy studies of BLES monomolecular films doped with small amounts of fluorescent lipids showed the appearance and growth of dark domains (liquid condensed) dispersed in a fluorescent phase (liquid expanded) with shapes and sizes similar to those observed in BLES giant unilamelar vesicles. Our study suggests that bovine surfactant lipids can organize into discrete phases in monolayers or bilayers with equivalent temperature dependencies and may occur at physiological temperatures and surface pressures equivalent to those at the lung interface.

Behavior of a GPI-anchored protein in phospholipid monolayers at the air-water interface

The interaction between alkaline phosphatase (AP), a glycosylphosphatidylinositol (GPI)-anchored protein (AP-GPI), and phospholipids was monitored using Langmuir isotherms and PM-IRRAS spectroscopy. AP-GPI was injected under C16 phospholipid monolayers with either a neutral polar head (1,2-dipalmitoyl-sn-glycero-3-phosphocholine monohydrate (DPPC)) or an anionic polar head (1,2-dipalmitoyl-sn-glycero-3-phospho-L-serine (DPPS)). The increase in molecular area due to the injection of protein depended on the surface pressure and the type of phospholipid. At all surface pressures, it was highest in the case of DPPS monolayers. The surface elasticity coefficient E, determined from the pi-A diagrams, allowed to deduct that the AP-GPI-phospholipid mixtures presented a molecular arrangement less condensed than the corresponding pure phospholipid films. PM-IRRAS spectra suggested different protein-lipid interactions as a function of the nature of the lipids. AP-GPI modified the organization of the DPPS deuterated chains whereas AP-GPI affected only the polar group of DPPC at low surface pressure (8 mN/m). Different protein hydration layers between the DPPC and DPPS monolayers were suggested to explain these results. PM-IRRAS spectra of AP-GPI in the presence of lipids showed a shape similar to those collected for pure AP-GPI, indicating a similar orientation of AP-GPI in the presence or absence of phospholipids, where the active sites of the enzyme are turned outside of the membrane.

Cholesterol is not crucial for the existence of microdomains in kidney brush-border membrane models

The external membrane leaflet plays a key role in the organization of the cell plasma membrane as a mosaic of ordered microdomains enriched in sphingolipids and cholesterol and of fluid domains. In this study, the thermotropic behavior and the topology of bilayers made of a phosphatidylcholine/sphingomyelin mixture, which mimicks the lipid composition of the external leaflet of renal brush-border membranes, were examined by differential scanning calorimetry and atomic force microscopy. In the absence of cholesterol, a broad phase separation process occurred where ordered gel phase domains of size varying from the mesoscopic to the microscopic scale, enriched in sphingomyelin, occupied half of the bilayer surface at room temperature. Increasing amounts of cholesterol progressively decreased the enthalpy of the transition and modified the topology of membranes domains up to a concentration of 33 mol % for which no membrane domains were detected. These results strongly suggest that, in membranes highly enriched in sphingolipids like renal and intestinal brush borders, there is a threshold close to the physiological concentration above which cholesterol acts as a suppressor rather than as a promoter of membrane domains. They also suggest that cholesterol depletion does not abolish the lateral heterogenity in brush-border membranes.

Protein-induced formation of cholesterol-rich domains

A major protein of neuronal rafts, NAP-22, binds specifically to cholesterol. We demonstrate by circular dichroism that NAP-22 contains a significant amount of beta-structure that is not sensitive to binding of the protein to membranes, suggesting that a major portion of the protein does not insert deeply into the membrane. The free energy of binding of NAP-22 to liposomes of dioleoylphosphatidylcholine with 40% cholesterol is -7.3 +/- 0.5 kcal/mol. NAP-22 mixed with dipalmitoylphosphatidylcholine and 40% cholesterol partitions into the detergent insoluble fraction in the presence of 1% Triton X-100. NAP-22 also causes this insoluble fraction to become enriched in cholesterol relative to phospholipid, again demonstrating the ability of this protein to segregate cholesterol and phospholipids into domains. Differential scanning calorimetry results demonstrate that NAP-22 promotes domain formation in liposomes composed of cholesterol and phosphatidylcholine. This is shown by NAP-22-promoted changes in the shape and enthalpy of the phase transition of phosphatidylcholine as well as by the appearance of cholesterol crystallite transitions in membranes composed of phosphatidylcholine with either saturated or unsaturated acyl chains. In situ atomic force microscopy revealed a marked change in the surface morphology of a supported bilayer of dioleoylphosphatidylcholine with 0.4 mole fraction of cholesterol upon addition of NAP-22. Prior to the addition of the protein, the bilayer appears to be a molecularly smooth structure with uniform thickness. Addition of NAP-22 resulted in the rapid formation of localized raised bilayer domains. Remarkably, there was no gross disruption or erosion of the bilayer but rather simply an apparent rearrangement of the lipid bilayer structure due to the interaction of NAP-22 with the lipid. Our results demonstrate that NAP-22 can induce the formation of cholesterol-rich domains in membranes. This is likely to be relevant in neuronal membrane domains that are rich in NAP-22.

Probing the spatial dependence of the emission spectrum of single human retinal lipofuscin granules using near-field scanning optical microscopy

The emission spectra of single lipofuscin granules are examined using spectrally resolved confocal microscopy and near-field scanning optical microscopy (NSOM). The emission spectrum varies among the granules examined revealing that individual granules are characterized by different distributions of fluorophores. The range of spectra observed is consistent with in vivo spectra of human retinal pigment epithelium cells. NSOM measurements reveal that the shape of the spectrum does not vary with position within the emissive regions of single lipofuscin granules. These results suggest that the relative distribution of fluorophores within the emissive regions of an individual granule is homogeneous on the spatial scale approximately 150 nm.

Domain formation in models of the renal brush border membrane outer leaflet

The plasma membrane outer leaflet plays a key role in determining the existence of rafts and detergent-resistant membrane domains. Monolayers with lipid composition mimicking that of the outer leaflet of renal brush border membranes (BBM) have been deposited on mica and studied by atomic force microscopy. Sphingomyelin (SM) and palmitoyloleoyl phosphatidylcholine (POPC) mixtures, at molar ratios varying from 2:1 to 4:1, were phase-separated into liquid condensed (LC) SM-enriched phase and liquid expanded (LE) POPC-enriched phase. The LC phase accounted for 33 and 58% of the monolayers surface for 2:1 and 4:1 mixtures, respectively. Addition of 20-50 mol % cholesterol (Chl) to the SM/POPC (3:1) mixtures induced marked changes in the topology of monolayers. Whereas Chl promoted the connection between SM domains at 20 mol %, increasing Chl concentration progressively reduced the size of domains and the height differences between the phases. Lateral heterogeneity was, however, still present at 33 mol % Chl. The results indicate that the lipid composition of the outer leaflet is most likely responsible for the BBM thermotropic transition properties. They also strongly suggest that the common maneuver that consists of depleting membrane cholesterol to suppress rafts does not abolish the lateral heterogeneity of BBM membranes.