Low Cytotoxicity and Genotoxicity of Two-Dimensional MoS2 and WS2

Transition Metal Dichalcogenides (TMDC)-Based Nanozymes for Biosensing and Therapeutic Applications

Nanozymes, a type of nanomaterial with enzyme-like properties, are a promising alternative to natural enzymes. In particular, transition metal dichalcogenides (TMDCs, with the general formula MX2, where M represents a transition metal and X is a chalcogen element)-based nanozymes have demonstrated exceptional potential in the healthcare and diagnostic sectors. TMDCs have different enzymatic properties due to their unique nano-architecture, high surface area, and semiconducting properties with tunable band gaps. Furthermore, the compatibility of TMDCs with various chemical or physical modification strategies provide a simple and scalable way to engineer and control their enzymatic activity. Here, we discuss recent advances made with TMDC-based nanozymes for biosensing and therapeutic applications. We also discuss their synthesis strategies, various enzymatic properties, current challenges, and the outlook for future developments in this field.

Ultrasensitive two-dimensional material-based MCF-7 cancer cell sensor driven by perturbation processes

Changes in lipid composition and structure during cell development can be markers for cell apoptosis or various diseases such as cancer. Although traditional fluorescence techniques utilising molecular probes have been studied, these methods are limited in studying these micro-changes as they require complex probe preparation and cannot be reused, making cell monitoring and detection challenging. Here, we developed a direct current (DC) resistance sensor based on two-dimensional (2D) molybdenum disulfide (MoS₂) nanosheets to enable cancer cell-specific detection dependent on micro-changes in the cancer cell membrane. Atomistic molecular dynamics (MD) simulations were used to study the interaction between 2D MoS₂ and cancer lipid bilayer systems, and revealed that previously unconsidered perturbations in the lipid bilayer can cause an increase in resistance. Under an applied DC sweep, we observed an increase in resistance when cancer cells were incubated with the nanosheets. Furthermore, a correlation was observed between the resistance and breast cancer epithelial cell (MCF-7) population, illustrating a cell population-dependent sensitivity of our method. Our method has a detection limit of ∼3 × 10³ cells, below a baseline of ∼1 × 10⁴ cells for the current state-of-the-art electrical-based biosensors using an adherent monolayer with homogenous cells. This combination of a unique 2D material and electrical resistance framework represents a promising approach for the early detection of cancerous cells and to reduce the risk of post-surgery cancer recurrence.

Electrospun PCL/MoS2 Nanofiber Membranes Combined with NIR-Triggered Photothermal Therapy to Accelerate Bone Regeneration

Electrospun nanofiber membranes have been widely used for guided bone regeneration (GBR). For assistance in bone healing, photothermal therapy which renders moderate heat stimulation to defect regions by near-infrared (NIR) light irradiation has attracted much attention in recent years. Combined with photothermal therapy, novel electrospun poly(ε-caprolactone)/molybdenum disulfide (PCL/MoS₂ ) nanofiber membranes are innovatively synthesized as GBR for bone therapy, wherein the exfoliated MoS₂ nanosheets served as osteogenic enhancers and NIR photothermal agents. With the doping of MoS₂ , the mechanical properties of nanofiber membranes got improved with the degradation unaffected. The composite PCL/MoS₂ membranes show enhanced cell growth and osteogenic performance compared with PCL alone. Under NIR-triggered mild photothermal therapy, osteogenesis and bone healing are accelerated by using PCL/MoS₂ nanofiber membranes for growth of bone mesenchymal stem cells in vitro and repair of rat tibia bone defect in vivo. The novel nanofiber membranes may be developed as intelligent GBR in the therapy of bone defects.

Electrochemical and optical biosensors based on multifunctional MXene nanoplatforms: Progress and prospects

Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (MXene) have emerged as a rising family of atomic layered nanomaterials which undergoes intensive investigations in interdisciplinary applications. The large surface-to-volume ratio, excellent mechanical strength, desirable biocompatibility, along with tunable electronic and optical properties, render 2D MXenes exceptional attractive as versatile nanoplatforms for biosensing. Herein, advanced progress and novel paradigms of MXene-based biosensors are reviewed, focusing on the combination of MXenes with various detection techniques that promotes target recognition and signal transducing. Regarding the nature of transducing signals, MXene-based biosensors are categorized into two groups where MXenes serve as electrical platforms or optical platforms, respectively. The merits of MXenes are critically compared with other 2D materials to illustrate the distinctive advantages of MXenes in biosensing, while challenges such as environmental vulnerability was discussed to guide the sensor design. Facing with the rapid development of wearable electronics and internet of medical things, as well as escalating demanding in precision medicine, perspectives are provided to elucidate the potential of MXenes in propelling advances in these trending biomedical applications.

Molybdenum Disulfide-Zinc Oxide Photocathodes for Photo-Rechargeable Zinc-Ion Batteries

Systems for harvesting and storing solar energy have found practical applications ranging from solar farms to autonomous smart devices. Generally, these energy solutions consist of solar cells for light harvesting and rechargeable batteries to match the solar energy supply to consumption demands. Rather than having a separate energy harvesting and storing device, we report photo-rechargeable zinc-ion batteries (hν-ZIBs) using a photoactive cathode composed of layer-by-layer grown zinc oxide and molybdenum disulfide. These photocathodes are capable of harvesting solar energy and storing it in the same material and alleviate the need for solar cells or power converters. The proposed photocathodes achieve photoconversion efficiencies of ∼1.8% using a 455 nm light source and ∼0.2% of solar-conversion efficiencies. Light not only allows photocharging but also enhances the battery capacity from 245 to 340 mA h g^-1 (specific current of 100 mA g^-1 and 12 mW cm^-2 light intensity at 455 nm). Finally, the proposed hν-ZIBs also demonstrate a capacity retention of ∼82% over 200 cycles.

Photoinduced transformation of silver ion by molybdenum disulfide nanoflakes at environmentally relevant concentrations attenuates its toxicity to freshwater algae

The transformation of Ag⁺ is strongly correlated with its risks in aquatic environment. Considering the wide application of molybdenum disulfide (MoS₂) and the inevitable release into the environment, the effects of MoS₂ on Ag⁺ transformation and toxicity are of great concerns. This study revealed the pH-dependent reduction of Ag⁺ (0.5 mM) to Ag nanoparticles (AgNPs) by MoS₂ (50 mg/L) and solar irradiation obviously accelerates the AgNPs formation (2.638 mg/L per day, pH=7.0) compared with dark condition (0.637 mg/L per day), ascribing to the electrons capture from electron-hole pairs of MoS₂ by Ag⁺. Ionic strengths and natural organic matter decreased the AgNPs yield. Metallic 1 T phase of MoS₂ primarily participated in AgNPs formation and was oxidized to soluble ions (MoO₄^2-) due to the oxygen generation in valance band. The above processes also occurred between Ag⁺ and MoS₂ at environmentally relevant concentrations. Further, photoinduced transformation of Ag⁺ by MoS₂ (10-100 μg/L) significantly lowered its toxicity to freshwater algae. The AgNPs formation on MoS₂ reduced the bioavailability of Ag⁺ to algae, which was the mechanism for attenuated Ag⁺ toxicity. The provided data are helpful for better understanding the roles of MoS₂ on the environmental fates and risks of metal ions under natural conditions.

Electroanalytical overview: utilising micro- and nano-dimensional sized materials in electrochemical-based biosensing platforms

Research into electrochemical biosensors represents a significant portion of the large interdisciplinary field of biosensing. The drive to develop reliable, sensitive, and selective biosensing platforms for key environmental and medical biomarkers is ever expanding due to the current climate. This push for the detection of vital biomarkers at lower concentrations, with increased reliability, has necessitated the utilisation of micro- and nano-dimensional materials. There is a wide variety of nanomaterials available for exploration, all having unique sets of properties that help to enhance the performance of biosensors. In recent years, a large portion of research has focussed on combining these different materials to utilise the different properties in one sensor platform. This research has allowed biosensors to reach new levels of sensitivity, but we note that there is room for improvement in the reporting of this field. Numerous examples are published that report improvements in the biosensor performance through the mixing of multiple materials, but there is little discussion presented on why each nanomaterial is chosen and whether they synergise well together to warrant the inherent increase in production time and cost. Research into micro-nano materials is vital for the continued development of improved biosensing platforms, and further exploration into understanding their individual and synergistic properties will continue to push the area forward. It will continue to provide solutions for the global sensing requirements through the development of novel materials with beneficial properties, improved incorporation strategies for the materials, the combination of synergetic materials, and the reduction in cost of production of these nanomaterials.

Synergistic Photodynamic and Photothermal Antibacterial Activity of In Situ Grown Bacterial Cellulose/MoS2-Chitosan Nanocomposite Materials with Visible Light Illumination

Owing to the rise in prevalence of multidrug-resistant pathogens attributed to the overuse of antibiotics, infectious diseases caused by the transmission of microbes from contaminated surfaces to new hosts are an ever-increasing threat to public health. Thus, novel materials that can stem this crisis, while also functioning via multiple antimicrobial mechanisms so that pathogens are unable to develop resistance to them, are in urgent need. Toward this goal, in this work, we developed in situ grown bacterial cellulose/MoS₂-chitosan nanocomposite materials (termed BC/MoS₂-CS) that utilize synergistic membrane disruption and photodynamic and photothermal antibacterial activities to achieve more efficient bactericidal activity. The BC/MoS₂-CS nanocomposite exhibited excellent antibacterial efficacy, achieving 99.998% (4.7 log units) and 99.988% (3.9 log units) photoinactivation of Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, respectively, under visible-light illumination (xenon lamp, 500 W, λ ≥ 420 nm, and 30 min). Mechanistic studies revealed that the use of cationic chitosan likely facilitated bacterial membrane disruption and/or permeability, with hyperthermia (photothermal) and reactive oxygen species (photodynamic) leading to synergistic pathogen inactivation upon visible-light illumination. No mammalian cell cytotoxicity was observed for the BC/MoS₂-CS membrane, suggesting that such composite nanomaterials are attractive as functional materials for infection control applications.

Ultrasmall Molybdenum Disulfide Quantum Dots Cage Alzheimer's Amyloid Beta to Restore Membrane Fluidity

Alzheimer's disease (AD) is a major cause of dementia characterized by the overexpression of transmembrane amyloid precursor protein and its neurotoxic byproduct amyloid beta (Aβ). A small peptide of considerable hydrophobicity, Aβ is aggregation prone catalyzed by the presence of cell membranes, among other environmental factors. Accordingly, current AD mitigation strategies often aim at breaking down the Aβ-membrane communication, yet no data is available concerning the cohesive interplay of the three key entities of the cell membrane, Aβ, and its inhibitor. Using a lipophilic Laurdan dye and confocal fluorescence microscopy, we observed cell membrane perturbation and actin reorganization induced by Aβ oligomers but not by Aβ monomers or amyloid fibrils. We further revealed recovery of membrane fluidity by ultrasmall MoS2 quantum dots, also shown in this study as a potent inhibitor of Aβ amyloid aggregation. Using discrete molecular dynamics simulations, we uncovered the binding of MoS2 and Aβ monomers as mediated by hydrophilic interactions between the quantum dots and the peptide N-terminus. In contrast, Aβ oligomers and fibrils were surface-coated by the ultrasmall quantum dots in distinct testudo-like, reverse protein-corona formations to prevent their further association with the cell membrane and adverse effects downstream. This study offers a crucial new insight and a viable strategy for regulating the amyloid aggregation and membrane-axis of AD pathology with multifunctional nanomedicine.

Antipathogenic properties and applications of low-dimensional materials

A major health concern of the 21st century is the rise of multi-drug resistant pathogenic microbial species. Recent technological advancements have led to considerable opportunities for low-dimensional materials (LDMs) as potential next-generation antimicrobials. LDMs have demonstrated antimicrobial behaviour towards a variety of pathogenic bacterial and fungal cells, due to their unique physicochemical properties. This review provides a critical assessment of current LDMs that have exhibited antimicrobial behaviour and their mechanism of action. Future design considerations and constraints in deploying LDMs for antimicrobial applications are discussed. It is envisioned that this review will guide future design parameters for LDM-based antimicrobial applications.

Toxicological assessment of commercial monolayer tungsten disulfide nanomaterials aqueous suspensions using human A549 cells and the model fungus Saccharomyces cerevisiae

The utilization of tungsten disulfide (WS₂) nanomaterials in distinct applications is raising due to their unique physico-chemical properties, such as low friction coefficient and high strength, which highlights the necessity to study their potential toxicological effects, due to the potential increase of environmental and human exposure. The aim of this work was to analyze commercially available aqueous dispersions of monolayer tungsten disulfide (2D WS₂) nanomaterials with distinct lateral size employing a portfolio of physico-chemical and toxicological evaluations. The structure and stoichiometry of monolayer tungsten disulfide (WS₂-ACS-M) and nano size monolayer tungsten disulfide (WS₂-ACS-N) was analyzed by Raman spectroscopy, whereas a more quantitative approach to study the nature of formed oxidized species was undertaken employing X-ray photoelectron spectroscopy. Adenocarcinomic human alveolar basal epithelial cells (A549 cells) and the ecotoxicology model Saccharomyces cerevisiae were selected as unicellular eukaryotic systems to assess the cytotoxicity of the nanomaterials. Cell viability and reactive oxygen species (ROS) determinations demonstrated different toxicity levels depending on the cellular model used. While both 2D WS₂ suspensions showed very low toxicity towards the A549 cells, a comparable concentration (160 mg L^-1) reduced the viability of yeast cells. The toxicity of a nano size 2D WS₂ commercialized in dry form from the same provider was also assessed, showing ability to reduce yeast cells viability as well. Overall, the presented data reveal the physico-chemical properties and the potential toxicity of commercial 2D WS2 aqueous suspensions when interacting with distinct eukaryotic organisms, showing differences in function of the biological system exposed.

Interaction of Poly L-Lactide and Tungsten Disulfide Nanotubes Studied by in Situ X-ray Scattering during Expansion of PLLA/WS2NT Nanocomposite Tubes

In situ synchrotron X-ray scattering was used to reveal the transient microstructure of poly(L-lactide) (PLLA)/tungsten disulfide inorganic nanotubes (WS₂NTs) nanocomposites. This microstructure is formed during the blow molding process (“tube expansion”) of an extruded polymer tube, an important step in the manufacturing of PLLA-based bioresorbable vascular scaffolds (BVS). A fundamental understanding of how such a microstructure develops during processing is relevant to two unmet needs in PLLA-based BVS: increasing strength to enable thinner devices and improving radiopacity to enable imaging during implantation. Here, we focus on how the flow generated during tube expansion affects the orientation of the WS₂NTs and the formation of polymer crystals by comparing neat PLLA and nanocomposite tubes under different expansion conditions. Surprisingly, the WS₂NTs remain oriented along the extrusion direction despite significant strain in the transverse direction while the PLLA crystals (c-axis) form along the circumferential direction of the tube. Although WS₂NTs promote the nucleation of PLLA crystals in nanocomposite tubes, crystallization proceeds with largely the same orientation as in neat PLLA tubes. We suggest that the reason for the unusual independence of the orientations of the nanotubes and polymer crystals stems from the favorable interaction between PLLA and WS₂NTs. This favorable interaction leads WS₂NTs to disperse well in PLLA and strongly orient along the axis of the PLLA tube during extrusion. As a consequence, the nanotubes are aligned orthogonally to the circumferential stretching direction, which appears to decouple the orientations of PLLA crystals and WS₂NTs.

An ion-selective crown ether covalently grafted onto chemically exfoliated MoS2 as a biological fluid sensor

We describe the basal plane functionalization of chemically exfoliated molybdenum disulfide (ce-MoS2) nanosheets with a benzo-15-crown-5 ether (B15C5), promoted by the chemistry of diazonium salts en route to the fabrication and electrochemical assessment of an ion-responsive electrode. The success of the chemical modification of ce-MoS2 nanosheets was investigated by infrared and Raman spectroscopy, and the amount of the incorporated crown ether was estimated by thermogravimetric analysis. Raman spatial mapping at on-resonance excitation allowed us to disclose the structural characteristics of the functionalized B15C5-MoS2 nanosheets and the impact of basal plane functionalization to the stabilization of the 1T phase of ce-MoS2. Morphological investigation of the B15C5-MoS2 hybrid was implemented by atomic force microscopy and high-resolution transmission electron microscopy. Furthermore, fast-Fourier-transform analysis and in situ energy dispersive X-ray spectroscopy revealed the crystal lattice of the modified nanosheets and the presence of crown-ether addends, respectively. Finally, B15C5-MoS2 electrodes were constructed and evaluated as ion-selective electrodes for sodium ions in aqueous solution and an artificial sweat matrix.

Coupling metal organic frameworks with molybdenum disulfide nanoflakes for targeted cancer theranostics

The superior properties of metal organic frameworks (MOF) can provide great opportunities for merging functional nanoparticles to construct smart and versatile cancer theranostic agents. In this study, on the basis of non-mesoporous nanoparticles (molybdenum disulfide, MoS2), the structure of the MOF shell layer with an adjustable structure can be constructed through the natural coordination interaction between polydopamine (PDA) and iron ion, and the tumor cell target ligand was modified on the surface of the nanocomposite after loading the anticancer drug doxorubicin hydrochloride (DOX) to form a multifunctional cancer theranostics nanoplatform (DOX@MoS2-PMA). Benefiting from the excellent properties of MoS2 and MOF, the favorable photothermal properties and pH/near-infrared (NIR) laser-triggered DOX release behavior of composite nanoparticles were demonstrated. Its well-defined nanostructure, adequate colloidal stability, and satisfactory biocompatibility were further evidenced. Furthermore, the selective tumor cell targeting ability of DOX@MoS2-PMA can improve the cellular uptake efficacy and the photothermal-chemotherapy combination therapy can significantly enhance the killing effect on cancer cells both in vitro and in vivo. In addition, fluorescence imaging results show that nanoparticles can efficiently accumulate inside tumors. The photoacoustic (PA) and magnetic resonance (MR) imaging capabilities derived from different components of nanoparticles can perform better imaging effects. To the best of our knowledge, this is the first attempt to merge the performance of MoS2 with MOF for PA/MR dual-modality imaging-guided photothermal-chemotherapy combination therapy. Our work presented herein proves that MOF can be combined with non-mesoporous nanoparticles and exhibits excellent performance, thus opening a new avenue for endowing non-mesoporous nanoparticles with an efficient drug loading capacity and practical applications of MOFs in nanomedicine.

Patchable and Implantable 2D Nanogenerator

With the development of technology, electronic devices are becoming more miniaturized and multifunctional. With the development of small electronic devices, they are changing from the conventional accessory type, which is portable, to the patchable type, which can be attached to a person's apparel or body, and the eatable/implantable type, which can be directly implanted into the human body. In this regard, it is necessary to address various technical issues, such as high-capacity/high-efficiency small-sized battery technology, component miniaturization, low power technology, flexible technology, and smart sensing technology. In addition, there is a demand for self-powered wireless systems in particular devices. A piezoelectric/triboelectric nanogenerator (PENG/TENG) can generate electric energy from small amounts of mechanical energy such as from blood flow and heartbeats in the human body as well as human movement, so it is expected that it will enable the development of self-powered wireless systems. Due to their unique properties, such as flexibility, transparency, mechanical stability, and nontoxicity, 2D materials are optimal materials for the development of implantable and patchable self-powered nanodevices in the human body. In this Review, the studies related to patchable and implantable devices for the human body using PENGs/TENGs based on 2D materials are discussed.

Synthesis of biocompatible chitosan functionalized Ag decorated biocomposite for effective antibacterial and anticancer activity

The transition-metal dichalcogenides (TMDCs) like MoS₂ and WS₂ are a new and interesting class of materials and show considerable promise for use in a wide variety of fields, including nanomedicine for cancer. The eco-friendly, biodegradability, toxicity, and antimicrobial activity remain an open issue. Herein, we focused on the current demands of two dimensional (2D) TMDCs and produced high-quality, few-layered MoS₂ nanosheets. Noble metal Ag incorporated into the 2D-CS/MoS₂ NC by the liquid exfoliated process. The manufactured CS/MoS₂/Ag hybrid NC showed excellent antibacterial activity against two microorganisms such as Gram-positive (21, 27, and 33 mm) and Gram-negative bacteria (23, 30, and 39 mm). The CS/MoS_2/Ag hybrid NC was designed to have significant antibacterial activity against E.coli bacteria than S.aureus. Furthermore, the hybrid NC has a 74.18% cell inhibition against MCF-7 cancer cells. According to the literature relevant, it is the first extensive experimental analysis on the nano-bio interaction of 2D TMDCs nanomaterials in MCF-7 breast cancer cells.

Defect Engineering of Two-Dimensional Transition-Metal Dichalcogenides: Applications, Challenges, and Opportunities

Atomic defects, being the most prevalent zero-dimensional topological defects, are ubiquitous in a wide range of 2D transition-metal dichalcogenides (TMDs). They could be intrinsic, formed during the initial sample growth, or created by postprocessing. Despite the majority of TMDs being largely unaffected after losing chalcogen atoms in the outermost layer, a spectrum of properties, including optical, electrical, and chemical properties, can be significantly modulated, and potentially invoke applicable functionalities utilized in many applications. Hence, controlling chalcogen atomic defects provides an alternative avenue for engineering a wide range of physical and chemical properties of 2D TMDs. In this article, we review recent progress on the role of chalcogen atomic defects in engineering 2D TMDs, with a particular focus on device performance improvements. Various approaches for creating chalcogen atomic defects including nonstoichiometric synthesis and postgrowth treatment, together with their characterization and interpretation are systematically overviewed. The tailoring of optical, electrical, and magnetic properties, along with the device performance enhancement in electronic, optoelectronic, chemical sensing, biomedical, and catalytic activity are discussed in detail. Postformation dynamic evolution and repair of chalcogen atomic defects are also introduced. Finally, we offer our perspective on the challenges and opportunities in this field.

Nanocolloids, but Not Humic Acids, Augment the Phytotoxicity of Single-Layer Molybdenum Disulfide Nanosheets

Engineered nanomaterials (ENMs), especially transition metal dichalcogenide (TMDC), have received great attention in recent years due to their advantageous properties and applications in various fields and are inevitably released into the environment during their life cycle. However, the effect of natural nanocolloids, widely distributed in the aquatic environment, on the environmental transformation and ecotoxicity of ENMs remains largely unknown. In this study, the effects of natural nanocolloids were compared to humic acid on the environmental transformation and ecotoxicity of single-layer molybdenum disulfide (SLMoS₂), a representative TMDC. SLMoS₂ with nanocolloids or humic acid (HA) enhanced their dispersion and Mo ion release in deionized water. Nanocolloids induced growth inhibition, reactive oxygen species (ROS) elevation, and cell permeability. Low-toxicity SLMoS₂ combined with nanocolloids will enhance the above adverse effects. SLMoS₂-nanocolloids induced serious damage (cell distortion and deformation), SLMoS₂ internalization, and metabolic perturbation on Chlorella vulgaris (C. vulgaris). In contrast, the addition of HA induced the growth promotion and lower ROS level, inhibited the internalization of SLMoS₂, and mitigated metabolic perturbation on C. vulgaris. This work provides insights into the effect of natural nanocolloids on the behaviors and biological risks of ENMs in aquatic environments, deserving substantial future attention.

The effect of 2D tungsten disulfide nanoparticles on Lewis lung carcinoma cells in vitro

The unique physicochemical properties of modern two-dimensional (2D) nanomaterials with graphene-like structures make them promising candidates for biology and medicine purposes. In this article, we investigate the influence of the two-dimensional tungsten disulfide (2D WS₂) water suspension nanoparticles obtained by an improved mechanochemical method from powdered WS₂ on morphological and structural characteristics of Lewis lung carcinoma cells using FT-IR, Raman spectroscopy, and confocal microscopy. The characterization of the 2D WS₂ nanoparticles by different physical methods is given also. We have highlighted that 2D WS₂ does not exert cytotoxic activity in the case of 1 day incubation with tumor cells. Prolongation of the incubation period up to 2 days has caused a statistically significant (p < 0.05) concentration-dependent decrease of the number of viable cells by more than 30% with the maximum cytotoxic effect at concentrations of 2D WS₂ close to 2 μg ml⁻¹. In the Raman spectra of 2D WS₂ treated cells the bands centered at 354 cm⁻¹ and 419 cm⁻¹, which are assigned to characteristics and modes of WS₂ nanoparticles were observed. The obtained data indicate, that the cytotoxic effect of 2D WS₂ on tumor cells in the case of long-term incubation is realized particularly through the ability of 2D WS₂ to enter tumor cells and/or accumulate on their surface, which gives a rationale to conduct further studies of their antitumor efficacy in vitro and in vivo when combined with chemotherapeutic drugs.

WS₂ 2D nanoparticles show no cytotoxic and/or cytostatic effect on Lewis lung carcinoma cells after one day incubation. Only after two days incubation we registered cytotoxic effect. Cells incubated with 2D WS₂ nanoparticles have luminescence in the blue spectral region.

Recent advances in bioelectronics chemistry

Research in bioelectronics is highly interdisciplinary, with many new developments being based on techniques from across the physical and life sciences. Advances in our understanding of the fundamental chemistry underlying the materials used in bioelectronic applications have been a crucial component of many recent discoveries. In this review, we highlight ways in which a chemistry-oriented perspective may facilitate novel and deep insights into both the fundamental scientific understanding and the design of materials, which can in turn tune the functionality and biocompatibility of bioelectronic devices. We provide an in-depth examination of several developments in the field, organized by the chemical properties of the materials. We conclude by surveying how some of the latest major topics of chemical research may be further integrated with bioelectronics.

Two-dimensional materials in biomedical, biosensing and sensing applications

Two-dimensional (2D) materials are at the forefront of materials research. Here we overview their applications beyond graphene, such as transition metal dichalcogenides, monoelemental Xenes (including phosphorene and bismuthene), carbon nitrides, boron nitrides along with transition metal carbides and nitrides (MXenes). We discuss their usage in various biomedical and environmental monitoring applications, from biosensors to therapeutic treatment agents, their toxicity and their utility in chemical sensing. We highlight how a specific chemical, physical and optical property of 2D materials can influence the performance of bio/sensing, improve drug delivery and photo/thermal therapy as well as affect their toxicity. Such properties are determined by crystal phases electrical conductivity, degree of exfoliation, surface functionalization, strong photoluminescence, strong optical absorption in the near-infrared range and high photothermal conversion efficiency. This review conveys the great future of all the families of 2D materials, especially with the expanding 2D materials' landscape as new materials emerge such as germanene and silicene.

A critical review on the applications and potential risks of emerging MoS2 nanomaterials

Molybdenum disulfide (MoS₂) nanomaterials have been widely used in various fields such as energy store and transformation, environment protection, and biomedicine due to their unique physicochemical properties. Unfortunately, such large-scale production and use of MoS₂ nanomaterials would inevitably release into the environmental system and then potentially increase the risks of wildlife/ecosystem and human beings as well. In this review, we first introduce the physicochemichemical properties, synthetic methods and environmental behaviors of MoS₂ nanomaterials and their typical functionalized materials, then summarize their environmental and biomedical applications, next assess their potential health risks, covering in vivo and in vitro studies, along with the underlying toxicological mechanisms, and last point out some special phenomena about the balance between applications and potential risks. This review aims to provide guidance for harm predication induced by MoS₂ nanomaterials and to suggest prevention measures based on the recent research progress of MoS₂' applications and exerting toxicological data.

Effect of Chemical Vapor Deposition WS2 on Viability and Differentiation of SH-SY5Y Cells

In recent years, transition metal dichalcogenides have been attracting an increasing interest in the biomedical field, thus implying the need of a deeper understanding of their impact on cell behavior. In this study we investigate tungsten disulfide (WS2) grown via chemical vapor deposition (CVD) on a transparent substrate (sapphire) as a platform for neural-like cell culture. We culture SH-SY5Y human neuroblastoma cells on WS2, using graphene, sapphire and standard culture well as controls. The quality, thickness and homogeneity of the materials is analyzed using atomic force microscopy and Raman spectroscopy. The cytocompatibility of CVD WS2 is investigated for the first time by cell viability and differentiation assessment on SH-SY5Y cells. We find that cells differentiated on WS2, displaying a viability and neurite length comparable with the controls. These findings shine light on the possibility of using WS2 as a cytocompatible material for interfacing neural cells.

Fate assessment of commercial 2D MoS2 aqueous dispersions at physicochemical and toxicological level

The physicochemical properties and the toxicological potential of commercially available MoS₂ nanoparticles with different lateral size and degradation stage were studied in the present research work. To achieve this, the structure and stoichiometry of fresh and old aqueous suspensions of micro-MoS₂ and nano-MoS₂ was analyzed by Raman, while x-ray photoelectron spectroscopy allowed to identify more quantitatively the nature of the formed oxidized species. A, the toxicological impact of the nanomaterials under analysis was studied using adenocarcinomic human alveolar basal epithelial cells (A549 cells) and the unicellular fungus S. cerevisiae as biological models. Cell viability assays and reactive oxygen species (ROS) determinations demonstrated different toxicity levels depending on the cellular model used and in function of the degradation state of the selected commercial nanoproducts. Both MoS₂ nanoparticle types induced sublethal damage on the A549 cells though the increase of intracellular ROS levels, while comparable concentrations reduced the viability of yeast cells. In addition, the old MoS₂ nanoparticles suspensions exhibited a higher toxicity for both human and yeast cells than the fresh ones. Our findings demonstrate that the fate assessment of nanomaterials is a critical aspect to increase the understanding on their characteristics and on their potential impact on biological systems along their life cycle.

Influence of Size and Phase on the Biodegradation, Excretion, and Phytotoxicity Persistence of Single-Layer Molybdenum Disulfide

The increasing applications of single-layer molybdenum disulfide (SLMoS₂) pose great potential risks associated with environmental exposure. This study found that metallic-phase SLMoS₂ with nanoscale (N-1T-SLMoS₂, ∼400 nm) and microscale (M-1T-SLMoS₂, ∼3.6 μm) diameters at 10-25 mg/L induced significant algal growth inhibition (maximum 72.7 and 74.6%, respectively), plasmolysis, and oxidative damage, but these alterations were recoverable. Nevertheless, membrane permeability, chloroplast damage, and chlorophyll biosynthesis reduction were persistent. By contrast, the growth inhibition (maximum 55.3%) and adverse effects of nano-sized semiconductive-phase SLMoS₂ (N-2H-SLMoS₂, ∼400 nm) were weak and easily alleviated after 96 h of recovery. N-1T-SLMoS₂ (0.011 μg/h) and N-2H-SLMoS₂ (0.008 μg/h) were quickly biodegraded to soluble Mo compared with M-1T-SLMoS₂ (0.004 μg/h) and excreted by algae. Incomplete biodegradation of SLMoS₂ (26.8-43.9%) did not significantly mitigate its toxicity. Proteomics and metabolomics indicated that the downregulation of proteins (50.7-99.2%) related to antioxidants and photosynthesis and inhibition of carbon fixation and carbohydrate metabolism contributed to the persistent phytotoxicity. These findings highlight the roles and mechanisms of the size and phase in the persistent phytotoxicity of SLMoS₂, which has potential implications for risk assessment and environmental applications of nanomaterials.

Light-Responsive Inorganic Biomaterials for Biomedical Applications

Light-responsive inorganic biomaterials are an emerging class of materials used for developing noninvasive, noncontact, precise, and controllable medical devices in a wide range of biomedical applications, including photothermal therapy, photodynamic therapy, drug delivery, and regenerative medicine. Herein, a range of biomaterials is discussed, including carbon-based nanomaterials, gold nanoparticles, graphite carbon nitride, transition metal dichalcogenides, and up-conversion nanoparticles that are used in the design of light-responsive medical devices. The importance of these light-responsive biomaterials is explored to design light-guided nanovehicle, modulate cellular behavior, as well as regulate extracellular microenvironments. Additionally, future perspectives on the clinical use of light-responsive biomaterials are highlighted.

Nonthermal Plasma-Enhanced Chemical Vapor Deposition of Two-Dimensional Molybdenum Disulfide

Molybdenum disulfide (MoS2) is being studied for a wide range of applications including lithium-ion batteries and hydrogen evolution reaction catalysts. In this paper, we present a single-step nonthermal plasma-enhanced chemical vapor deposition (PECVD) process for the production of two-dimensional MoS2. This method provides an alternative route to established CVD and plasma synthesis routes. The approach presented here synthesizes films in only a few minutes using elemental sulfur (S8) and molybdenum pentachloride (MoCl5) as precursors. Deposition utilizes a nonthermal inductively coupled plasma reactor and temperatures around 500 °C. Film growth characteristics and nucleation are studied as a function of precursor concentrations, argon flow rate, plasma power, and deposition time. Few-layer two-dimensional (MoS2) films were formed at low precursor concentrations. Films with nanoparticle-like features were formed when the precursor concentration was high. Noncontinuous nonstoichiometric films were found at low plasma power, while high plasma power led to continuous films with good stoichiometry. The vacancies and defects in these films may provide active sites for hydrogen evolution.

2D materials in electrochemical sensors for in vitro or in vivo use

Individual cells and cell populations are at the present time investigated with a myriad of analytical tools. While most of them are commercially available, some of these analytical tools are just emerging from research laboratories and are in the developmental phase. Electrochemical sensors which allow the monitoring of low molecular weight compounds released (and / or uptaken) by cells are among these emerging tools. Such sensors are increasingly built using 2D materials (e.g. graphene-based materials, transition metal dichalcogenides, etc.) with the aim of conferring better analytical performances to these devices. The present work critically reviews studies published during the last 10 years describing electrochemical sensors made with 2D materials and exploited to monitor small compounds (e.g. H₂O₂, ·NO, glucose, etc.) in living biological systems. It also discusses the very few 2D material-based electrochemical sensors which are wearable or usable in vivo. Finally, the present work includes a specific section about 2D material biocompatibility, a fundamental requirement for 2D material-based sensor applications in vitro and in vivo. As such, the review provides a critical view on the state of the art of electrochemical sensors made with 2D materials and used at cellular level and it evaluates the possibility that such sensors will be used on / in the human body on a wider scale.

Comparative analysis of biological effects of molybdenum(IV) sulfide in the form of nano- and microparticles on human hepatoma HepG2 cells grown in 2D and 3D models

Significance of MoS₂ nanoparticles as a lubricant or drug carriers indicates the need to assess their safety. In the study we analyzed the effects of MoS₂ nano- and microparticles and their internalization in vitro, using 2D and 3D culture models of human hepatoma HepG2 cell line. MoS₂ micro- and nanoparticles were characterized with high resolution electron microscopy (HR-SEM), X-ray diffraction (XRD) and Energy Dispersive X-Ray Spectroscopy (EDS). The cells were exposed to a range of concentrations of the nano-and microparticles suspensions (maximum of 250 μg/mL) for 72 h. Cell viability was assessed using WST-1 reduction test and LDH release assay. Particle internalization was analyzed using scanning transmission electron microscopy (STEM). The nanoparticles were internalized into the 2D and 3D cultured cells, in spheroids more efficiently into the outer layer. For microparticles mainly particles of less than 1 μm in diameter underwent internalization. This process, however, did not affect cell viability as measured with the WST-1 and LDH assays. STEM observation showed well preserved integrity of the cell membrane and no apparent cytotoxic effect. Although the particles seemed to be safely sequestered in vacuoles or the cytoplasm, their fate and eventual biological effects are not certain and deserve further studies.

Photothermal modulation of human stem cells using light-responsive 2D nanomaterials

Two-dimensional (2D) molybdenum disulfide (MoS2) nanomaterials are an emerging class of biomaterials that are photoresponsive at near-infrared wavelengths (NIR). Here, we demonstrate the ability of 2D MoS2 to modulate cellular functions of human stem cells through photothermal mechanisms. The interaction of MoS2 and NIR stimulation of MoS2 with human stem cells is investigated using whole-transcriptome sequencing (RNA-seq). Global gene expression profile of stem cells reveals significant influence of MoS2 and NIR stimulation of MoS2 on integrins, cellular migration, and wound healing. The combination of MoS2 and NIR light may provide new approaches to regulate and direct these cellular functions for the purposes of regenerative medicine as well as cancer therapy.

Solution-gated transistors of two-dimensional materials for chemical and biological sensors: status and challenges

Two-dimensional (2D) materials have been the focus of materials research for many years due to their unique fascinating properties and large specific surface area (SSA). They are very sensitive to the analytes (ions, glucose, DNA, protein, etc.), resulting in their wide-spread development in the field of sensing. New 2D materials, as the basis of applications, are constantly being fabricated and comprehensively studied. In a variety of sensing applications, the solution-gated transistor (SGT) is a promising biochemical sensing platform because it can work at low voltage in different electrolytes, which is ideal for monitoring body fluids in wearable electronics, e-skin, or implantable devices. However, there are still some key challenges, such as device stability and reproducibility, that must be faced in order to pave the way for the development of cost-effective, flexible, and transparent SGTs with 2D materials. In this review, the device preparation, device physics, and the latest application prospects of 2D materials-based SGTs are systematically presented. Besides, a bold perspective is also provided for the future development of these devices.

Molybdenum Disulfide Surfaces to Reduce Staphylococcus aureus and Pseudomonas aeruginosa Biofilm Formation

The reduction of bacteria and biofilm formation is important when designing surfaces for use in industry. Molybdenum disulfide surfaces (MoS_2SUR) were produced using MoS₂ particle (MoS_2PAR) sizes of 90 nm, 2 μm, and 6 μm containing MoS_2PAR concentrations of 5%, 10%, 15%, and 20%. These were tested to determine the efficacy of the MoS_2SUR to impede bacterial retention and biofilm formation of two different types of bacteria, Staphylococcus aureus and Pseudomonas aeruginosa. The MoS_2SUR were characterized using Fourier transform infrared spectroscopy, ion-coupled plasma atomic emission spectroscopy, scanning electron microscopy, optical profilometry, and water contact angles. The MoS_2SUR made with the smaller 90 nm MoS_2PAR sizes demonstrated smaller topographical-shaped features. As the size of the incorporated MoS_2PAR increased, the MoS_2SUR demonstrated wider surface features, and they were less wettable. The increase in MoS_2PAR concentration within the MoS_2SUR groups did not affect the surface topography but did increase wettability. However, the increase in MoS_2PAR size increased both the surface topography and wettability. The MoS_2SUR with the smaller topographical-shaped features influenced the retention of the S. aureus bacteria. Increased MoS_2SUR topography and wettability resulted in the greatest reduction in bacterial retention, and the bacteria became more heterogeneously dispersed and less clustered across the surfaces. The surfaces that exhibited decreased bacterial retention (largest particle sizes, largest features, greatest roughness, and most wettable) resulted in decreased biofilm formation. Cytotoxicity testing of the surface using cell viability demonstrated that the MoS_2SUR were not toxic against HK-2 cells at MoS_2PAR sizes of 90 nm and 2 μm. This work demonstrated that individual surface variables (MoS_2SUR topographic shape and roughness, MoS_2PAR size, and concentration) decreased bacterial loading on the surfaces, which then decreased biofilm formation. By optimizing MoS_2SUR properties, it was possible to impede bacterial retention and subsequent biofilm formation.

Immunostimulatory Potential of MoS2 Nanosheets: Enhancing Dendritic Cell Maturation, Migration and T Cell Elicitation

BACKGROUND

Due to their extraordinary physical and chemical properties, MoS2 nanosheets (MSNs) are becoming more widely used in nanomedicine. However, their influence on immune systems remains unclear.

MATERIALS AND METHODS

Two few-layered MSNs at sizes of 100-250 nm (S-MSNs) and 400-500 nm (L-MSNs) were used in this study. Bone marrow-derived dendritic cells (DCs) were exposed to both MSNs at different doses (0, 8, 16, 32, 64, 128 µg/mL) for 48 h and subjected to analyses of surface marker expression, cytokine secretion, lymphoid homing and in vivo T cell priming.

RESULTS

Different-sized MSNs of all doses did not affect the viability of DCs. The expression of CD40, CD80, CD86 and CCR7 was significantly higher on both S-MSN- and L-MSN-treated DCs at a dose of 128 μg/mL. As the dose of MSN increased, the secretion of IL-12p70 remained unchanged, the secretion of IL-1β decreased, and the production of TNF-α increased. A significant increase in IL-6 was observed in the 128 µg/mL L-MSN-treated DCs. In particular, MSN treatment dramatically improved the ex vivo movement and in vivo homing ability of both the local resident and blood circulating DCs. Furthermore, the cytoskeleton rearrangement regulated by ROS elevation was responsible for the enhanced homing ability of the MSNs. More robust CD4+ and CD8+ T cell proliferation and activation (characterized by high expression of CD107a, CD69 and ICOS) was observed in mice vaccinated with MSN-treated DCs. Importantly, exposure to MSNs did not interrupt LPS-induced DC activation, homing and T cell priming.

CONCLUSION

Few-layered MSNs ranging from 100 to 500 nm in size could play an immunostimulatory role in enhancing DC maturation, migration and T cell elicitation, making them a good candidate for vaccine adjuvants. Investigation of this study will not only expand the applications of MSNs and other new transition metal dichalcogenides (TMDCs) but also shed light on the in vivo immune-risk evaluation of MSN-based nanomaterials.

2D nanostructures beyond graphene: preparation, biocompatibility and biodegradation behaviors

Much attention has been paid to the fabrication of two-dimensional (2D) nanomaterials as therapeutics for nanomedicine in recent years owing to their special physicochemical characteristics. These fascinating physicochemical properties alongside their diverse biomedical applications drive us to give a review of the present endeavors of interest in these 2D nanomaterials. In this review, the up-to-date research advances of the preparation, biocompatibility and biodegradation behaviors of 2D nanomaterials including transition-metal dichalcogenides (TMDs), transition metal oxides (TMOs), black phosphorus (BP) nanosheets, metal-organic frameworks (MOFs), 2D boron (B), boron nitride (BN), layered double hydroxides (LDHs), 2D nanoscale metals, and other kinds of 2D nanomaterials are introduced. The in vitro and in vivo bio-compatibility, including their degradation assessments from the aspects of a redox reaction, enzymes, pH, and the cell environment, etc., of the above categories of 2D nanomaterials are discussed in detail. Finally, the prospects and challenges of the development of 2D nanomaterials aiming for biomedical applications are summarized.

Engineering Two-dimensional Nanomaterials to Enable Structure-Activity Relationship Studies in Nanosafety Research

Emerging, two-dimensional engineered nanomaterials (2DNMs) possess unique and diverse physical and chemical properties, such as extreme aspect ratios, adjustable electronic properties as well as functional lattice defects and surface chemistry which underpin their interactions with biological systems. This perspective highlights the need for structure activity relationship (SAR) studies for key properties of emerging grapheme-related and inorganic 2DNMs upon prioritization based on their potential impact and trajectory for large-scale production and applications. Further, it is discussed how a synthesis platform of microbiologically sterile, size-sorted, "model" 2DNMs with precise structure would enable SAR toxicological studies and allow for the sustainable and safe translation of 2D nanotechnology to real-world applications.

High-Sensitivity Detection of the Lung Cancer Biomarker CYFRA21-1 in Serum Samples Using a Carboxyl-MoS2 Functional Film for SPR-Based Immunosensors

We constructed a novel surface plasmon resonance (SPR) detection assay using carboxyl-functionalized molybdenum disulfide (carboxyl-MoS2) nanocomposites as a signal amplification sensing film for the ultrasensitive detection of the lung cancer-associated biomarker cytokeratin 19 fragment (CYFRA21-1). The experiment succeeded in MoS2 reacted with chloroacetic acid giving carboxyl-MoS2 as the reaction product. The additional shoulder in the C 1s and O 1s peaks of carboxyl-MoS2, which were increased in X-ray photoelectron spectroscopy, confirmed the presence of O-C=O groups on the surface of the carboxyl-MoS2. Compared to MoS2, the experimental results confirmed that carboxyl-modified MoS2 had improved low impedance and low refractive index. The carboxyl-MoS2-based chip had a high affinity, with an SPR angle shift enhanced by 2.6-fold and affinity binding K A enhanced by 15-fold compared to a traditional SPR sensor. The results revealed that the carboxyl-MoS2-based chip had high sensitivity, specificity, and SPR signal affinity, while the CYFRA21-1 assay in spiked clinical serum showed a lower detection limit of 0.05 pg/mL and a wider quantitation range (0.05 pg/mL to 100 ng/mL). The carboxyl-MoS2-based chip detection value was about 104 times more sensitive than the limit of detection of an enzyme-linked immunosorbent assay (ELISA) (0.60 ng/mL). The results showed that the carboxyl-MoS2-based chip had the potential to rapidly assay complex samples including bodily fluids, whole blood, serum, plasma, urine, and saliva in SPR-based immunosensors to diagnose diseases including cancer.

MoS2 nanoparticles induce behavioral alteration and oxidative stress mediated cellular toxicity in the social insect Oecophylla smaragdina (Asian weaver ant)

The study evaluates molybdenum disulfide (MoS₂) nanoparticles (NPs) induced oxidative stress during cellular toxicity in an invertebrate in vivo system, the weaver ant. The lethal concentration was checked and LC₅₀ was obtained as 50 µg/mL. Feeding assay and the photoluminescence activity confirmed the ingestion of MoS₂ NPs by the organism. Behavioral assays showed altered grooming behavior in the MoS₂ NP fed ants. A drastic decrease in the hemocyte count in the MoS₂ NP fed ants revealed the anti-proliferative role of MoS₂. This was further confirmed by 5-bromo-2'-deoxyuridine (BrdU) labeling assay. MoS₂ NPs induced apoptotic activity was also observed in the hemocytes by acridine orange/ethidium bromide (AO/EB) staining. The level of oxidative stress during cellular toxicity was observed. An increased reactive oxygen species (ROS) level was observed in the MoS₂ NP fed ants when compared to the control group. The increased activity of superoxide dismutase (SOD) and the lipid peroxidation (LPO) product were observed. While, the activities of catalase (CAT) and glutathione-s-transferase (GST) and the glutathione content (GSH) were decreased by MoS₂ NPs. The transcript levels of SODs, CAT and GST were up regulated in the treated group. Our results suggest that MoS₂ NPs induced oxidative stress mediates the cellular toxicity in the foragers of the weaver ant.

Biodegradable and bioabsorbable sensors based on two-dimensional materials

Two-dimensional (2D) materials, including graphene and transition metal dichalcogenides (TMDCs), have attracted considerable attention for the last decade due to their unique electrical, optical and mechanical properties. Recently, as their unique characteristics of biocompatibility and biodegradation are known, research on applying them in diagnostic and therapeutic applications has received considerable attention. This review provides a broad overview of recent reports on the biocompatibility and biodegradability of 2D materials and highlights recent progress in biodegradable and bioabsorbable sensors for diagnostic and therapeutic applications.

Electrochemical antioxidant screening and evaluation based on guanine and chitosan immobilized MoS2 nanosheet modified glassy carbon electrode (guanine/CS/MoS2/GCE)

In this study, an electrochemical biosensor based on guanine and chitosan immobilized MoS2 nanosheet modified glassy carbon electrode (guanine/CS/MoS2/GCE) was developed and employed for antioxidant screening and antioxidant capacity evaluation. The oxidation peak current of guanine was improved and nearly tripled after modifications of chitosan and MoS2 nanosheet. The immobilized guanine could be damaged by hydroxyl radicals generated in Fenton solution. However, in the presence of antioxidants, the guanine was protected and the oxidation peak current of guanine increased. This process mimics the mechanism of antioxidant protection in human body. The factors affecting preparation of sensor and detection of antioxidant capacity were optimized. At the optimum conditions, the guanine/CS/MoS2/GCE showed wide linear range, low detection limit, satisfactory reproducibility and stability for detection. Ascorbic acid was used as a model antioxidant to evaluate the antioxidant capacity. A good linearity was observed with a correlation coefficient of 0.9959 in the concentrations between 0.5 and 4.0 mg L-1. The antioxidant capacities of three flavonoids were also tested and the rank of antioxidant capacities was ascorbic acid (51.84%), quercetin (45.82%), fisetin (34.39%) and catechin (16.99%). Due to the rapid measurement and low cost, this sensor could provide an available sensing platform for antioxidant screening and evaluation.

WS2 Nanosheets at Noncytotoxic Concentrations Enhance the Cytotoxicity of Organic Pollutants by Disturbing the Plasma Membrane and Efflux Pumps

Emerging transition-metal dichalcogenide (TMDC) nanosheets, such as WS₂ nanosheets, have shown tremendous potential for use in many fields such as intelligent manufacturing and environmental protection. However, considerable knowledge gaps still exist regarding the impact of TMDCs on environmental risks, especially risks involving organic pollutants. Here, a synergistic toxicity between WS₂ nanosheets and organic pollutants (triclosan or tris(1,3-dichloro-2-propyl) phosphate) was found using the median-effect and combination index equations. In particular, the effect of synergy had a higher magnitude at low cytotoxicity levels and a noncytotoxic concentration of WS₂ nanosheets clearly enhanced the cytotoxicity and intracellular accumulation of organic pollutants. On the one hand, WS₂ nanosheets damaged the plasma membrane and cytoskeleton, resulting in increased membrane permeability and organic pollutant uptake. On the other hand, as shown by fluorescence substrate accumulation experiments and molecular dynamics simulations, WS₂ nanosheets affected the secondary structure of the efflux pumps and competitively bound with efflux pumps, blocking xenobiotic removal. This work emphasized that TMDCs, especially at the noncytotoxic level, in combination with organic pollutants caused damage that cannot be ignored, providing insight into comprehensive safety assessment and the specific toxicological mechanisms of TMDCs that accompany organic pollutant exposure.

Synthesis of biogenic chitosan-functionalized 2D layered MoS2 hybrid nanocomposite and its performance in pharmaceutical applications: In-vitro antibacterial and anticancer activity

A bacterial and viral infection causes life threatening diseases owing to the abuse of antibiotics and the development of antibiotic resistance microbes. Currently, biopolymers have been considered as the most promising materials in the medical field. Herein, the biogenic chitosan-functionalized MoS₂ nanocomposite was prepared by the hydrothermal method with the liquid exfoliation process. The X-ray diffraction (XRD) results of chitosan-MoS₂ hybrid nanocomposite revealed that MoS₂ nanoparticle was found to be 42 nm with a hexagonal crystal structure. FTIR and Raman spectrum revealed that the nitrogen functionalities in the chitosan interacted with MoS₂ to form the nanocomposite. The XPS spectrum of chitosan-MoS₂ nanocomposite confirms that C, N, O, Mo, and S exist in the nanocomposite. Thermal gravimetric analysis (TGA) and Differential thermal analysis (DTA) analysis showed that the chitosan-MoS₂ nanocomposite has higher thermal stability up to 600 °C. In the antibacterial application the chitosan-MoS₂ hybrid nanocomposite shows zones of inhibition against S. aureus as 22, 28, and 32 mm, and against E. coli as 26, 30, and 35 mm. In the anticancer analysis, chitosan-MoS₂ hybrid nanocomposites showed a maximum cell inhibition of 65.45% at 100 μg/mL^-1, resulting in the most significant MCF-7 cell inhibition.

Incorporation of molybdenum disulfide into polyetheretherketone creating biocomposites with improved mechanical, tribological performances and cytocompatibility for artificial joints applications

To improve mechanical, tribological and biological performances of polyetheretherketone (PEEK) for artificial joints applications, molybdenum disulfide (MoS₂, MS) nanosheets were incorporated into PEEK to fabricate MS/PEEK biocomposites (MPC) with MS content of 4 w% (MPC4) and 8 w% (MPC8). The results revealed that the MS nanosheets with the size of about 400 nm and sheet thickness of about 70 nm were distributed into PEEK matrix, and surface roughness as well as hydrophilicity of MPC increased with the MS content increasing. Moreover, the compressive strength and shore hardness of the MPC were accordingly enhanced. Furthermore, the coefficient of friction of the MPC decreased while the wear resistance of the MPC increased with the MS content increasing in both water-sliding and dry-sliding contact. In addition, rat bone marrow derived stromal cells adhered and proliferated on the composites, indicating that the MPC had no adverse influences on cell behaviors, indicating good cytocompatibility. The results demonstrated that incorporation of MS nanosheets into PEEK produced biocomposites with improved mechanical, tribological and biological performances. MPC8 with no cytotoxicity would have a great potential for artificial joints applications.

A bioconjugated MoS2 based nanoplatform with increased binding efficiency to cancer cells

Preparation and study of a MoS₂ nanosheet based nanoplatform for a cancer detection and treatment system equipped with an antibody–antigen based recognition element.