Binding proteins from alternative scaffolds

Affibody-mediated transferrin depletion for proteomics applications

An Affibody (Affibody) ligand with specific binding to human transferrin was selected by phage display technology from a combinatorial protein library based on the staphylococcal protein A (SpA)-derived Z domain. Strong and selective binding of the selected Affibody ligand to transferrin was demonstrated using biosensor technology and dot blot analysis. Impressive specificity was demonstrated as transferrin was the only protein recovered by affinity chromatography from human plasma. Efficient Affibody-mediated capture of transferrin, combined with IgG- and HSA-depletion, was demonstrated for human plasma and cerebrospinal fluid (CSF). For plasma, 85% of the total transferrin content in the samples was depleted after only two cycles of transferrin removal, and for CSF, 78% efficiency was obtained in single-step depletion. These results clearly suggest a potential for the development of Affibody-based resins for the removal of abundant proteins in proteomics analyses.

Stability and dynamics of the porcine odorant-binding protein

The denaturation process of porcine odorant-binding protein (pOBP) was studied by intrinsic fluorescence analysis and far- and near-UV circular dichroism measurements. Our results showed that a reversible one-step process described the denaturation by GdnHCl. The midpoint of the transition, that is, the point where the free energies of protein in the native and unfolded states are equal, corresponds to 2.3 M GdnHCl. The difference in free energy between native and unfolded states of pOBP is -5.95 kcal/mol in the absence of GdnHCl, indicating that the protein molecule is very stable to the denaturing action of GdnHCl. A 15% increase in fluorescence intensity accompanied by a 25% decrease of fluorescence decay lifetime recorded in the range of 0.0-1.4 M GdnHCl was explained by the destruction of the complex between Trp 16 and the positively charged atom NZ of Lys 120, localized over the center of the Trp 16 indole ring, with concurrent formation of complex between Trp 16 and bound water molecules also located in its close vicinity.

Alternative non-antibody scaffolds for molecular recognition

Originally proposed one decade ago, the idea of engineering proteins outside the immunoglobulin family for novel binding functions has evolved as a powerful technology. Several classes of protein scaffolds proved to yield reagents with specificities and affinities in a range that was previously considered unique to antibodies. Such engineered protein scaffolds are usually obtained by designing a random library with mutagenesis focused at a loop region or at an otherwise permissible surface area and by selection of variants against a given target via phage display or related techniques. Whereas a plethora of protein scaffolds has meanwhile been proposed, only few of them were actually demonstrated to yield specificities towards different kinds of targets and to offer practical benefits such as robustness, smaller size, and ease of expression that justify their use as a true alternative to conventional antibodies or their recombinant fragments. Currently, the most promising scaffolds with broader applicability are protein A, the lipocalins, a fibronectin domain, an ankyrin consensus repeat domain, and thioredoxin. Corresponding binding proteins are not only of interest as research reagents or for separation in biotechnology but also as potential biopharmaceuticals, especially in the areas of cancer, autoimmune and infectious diseases as well as for in vivo diagnostics. The medical prospects have boosted high commercial expectations, and many of the promising scaffolds are under development by biotech start-up companies. Although some issues still have to be addressed, for example immunogenicity, effector functions, and plasma half-life in the context of therapeutic use or low-cost high-throughput selection for applications in proteomics research, it has become clear that scaffold-derived binding proteins will play an increasing role in biotechnology and medicine.

Selection and characterization of large collections of peptide aptamers through optimized yeast two-hybrid procedures

Peptide aptamers are combinatorial proteins that specifically bind intracellular proteins and modulate their function. They are powerful tools to study protein function within complex regulatory networks and to guide small-molecule drug discovery. Here we describe methodological improvements that enhance the yeast two-hybrid selection and characterization of large collections of peptide aptamers. We provide a detailed protocol to perform high-efficiency transformation of peptide aptamer libraries, in-depth validation experiments of the bait proteins, high-efficiency mating to screen large numbers of peptide aptamers and streamlined confirmation of the positive clones. We also describe yeast two-hybrid mating assays, which can be used to determine the specificity of the selected aptamers, map their binding sites on target proteins and provide structural insights on their target-binding surface. Overall, 12 weeks are required to perform the protocols. The improvements on the yeast two-hybrid method can be also usefully applied to the screening of cDNA libraries to identify protein interactions.

Affilin-novel binding molecules based on human gamma-B-crystallin, an all beta-sheet protein

The concept of novel binding proteins as an alternative to antibodies has undergone rapid development and is now ready for practical use in a wide range of applications. Alternative binding proteins, based on suitable scaffolds with desirable properties, are selected from combinatorial libraries in vitro. Here, we describe an approach using a beta-sheet of human gamma-B-crystallin to generate a universal binding site through randomization of eight solvent-exposed amino acid residues selected according to structural and sequence analyses. Specific variants, so-called Affilin, have been isolated from a phage display library against a variety of targets that differ considerably in size and structure. The isolated Affilin variants can be produced in Escherichia coli as soluble proteins and have a high level of thermodynamic stability. The crystal structures of the human wild-type gamma-B-crystallin and a selected Affilin variant have been determined to 1.7 A and 2.0 A resolution, respectively. Comparison of the two molecules indicates that the human gamma-B-crystallin tolerates amino acid exchanges with no major structural change. We conclude that the intrinsically stable and easily expressed gamma-B-crystallin provides a suitable framework for the generation of novel binding molecules.

Approaches for systematic proteome exploration

With the completion of the human genome project (HUGO) during recent years, gene function, protein abundance and expression patterns in tissues and cell types have emerged as central areas for the scientific community. A mapped human proteome will extend the value of the genome sequence and large-scale efforts aiming at elucidating protein localization, abundance and function are invaluable for biomarker and drug discovery. This research area, termed proteomics, is more demanding than any genome sequencing effort and to perform this on a wide scale is a highly diverse task. Therefore, the proteomics field employs a range of methods to examine different aspects of proteomics including protein localization, protein-protein interactions, posttranslational modifications and alteration of protein composition (e.g. differential expression) in tissues and body fluids. Here, some of the most commonly used methods, including chromatographic separations together with mass spectrometry and a number of affinity proteomics concepts are discussed and exemplified.

Evolution of an Interloop Disulfide Bond in High-Affinity Antibody Mimics Based on Fibronectin Type III Domain and Selected by Yeast Surface Display: Molecular Convergence with Single-Domain Camelid and Shark Antibodies

The 10th human fibronectin type III domain ((10)Fn3) is one of several protein scaffolds used to design and select families of proteins that bind with high affinity and specificity to macromolecular targets. To date, the highest affinity (10)Fn3 variants have been selected by mRNA display of libraries generated by randomizing all three complementarity-determining region -like loops of the (10)Fn3 scaffold. The sub-nanomolar affinities of such antibody mimics have been attributed to the extremely large size of the library accessible by mRNA display (10(12) unique sequences). Here we describe the selection and affinity maturation of (10)Fn3-based antibody mimics with dissociation constants as low as 350 pM selected from significantly smaller libraries (10(7)-10(9) different sequences), which were constructed by randomizing only 14 (10)Fn3 residues. The finding that two adjacent loops in human (10)Fn3 provide a large enough variable surface area to select high-affinity antibody mimics is significant because a smaller deviation from wild-type (10)Fn3 sequence is associated with a higher stability of selected antibody mimics. Our results also demonstrate the utility of an affinity-maturation strategy that led to a 340-fold improvement in affinity by maximizing sampling of sequence space close to the original selected antibody mimic. A striking feature of the highest affinity antibody mimics selected against lysozyme is a pair of cysteines on adjacent loops, in positions 28 and 77, which are critical for the affinity of the (10)Fn3 variant for its target and are close enough to form a disulfide bond. The selection of this cysteine pair is structurally analogous to the natural evolution of disulfide bonds found in new antigen receptors of cartilaginous fish and in camelid heavy-chain variable domains. We propose that future library designs incorporating such an interloop disulfide will further facilitate the selection of high-affinity, highly stable antibody mimics from libraries accessible to phage and yeast surface display methods.

Engineered proteins as specific binding reagents

Over the past 30 years, monoclonal antibodies have become the standard binding proteins and currently find applications in research, diagnostics and therapy. Yet, monoclonal antibodies now face strong competition from synthetic antibody libraries in combination with powerful library selection technologies. More recently, an increased understanding of other natural binding proteins together with advances in protein engineering, selection and evolution technologies has also triggered the exploration of numerous other protein architectures for the generation of designed binding molecules. Valuable protein-binding scaffolds have been obtained and represent promising alternatives to antibodies for biotechnological and, potentially, clinical applications.

Affibody molecules: potential for in vivo imaging of molecular targets for cancer therapy

Targeting radionuclide imaging of tumor-associated antigens may help to select patients who will benefit from a particular biological therapy. Affibody molecules are a novel class of small (approximately 7 kDa) phage display-selected affinity proteins, based on the B-domain scaffold of staphylococcal protein A. A large library (3 x 10(9) variants) has enabled selection of high-affinity (up to 22 pM) binders for a variety of tumor-associated antigens. The small size of Affibody molecules provides rapid tumor localization and fast clearance from nonspecific compartments. Preclinical studies have demonstrated the potential of Affibody molecules for specific and high-contrast radionuclide imaging of HER2 in vivo, and pilot clinical data using indium-111 and gallium-68 labeled anti-HER2 Affibody tracer have confirmed its utility for radionuclide imaging in cancer patients.

Recombinant therapeutic antibodies

Recombinant antibody technology has revolutionized the development of antibody therapeutics. This minireview offers an overview of enabling technologies and future prospects of this rapidly progressing field.

ProteomeBinders: planning a European resource of affinity reagents for analysis of the human proteome

ProteomeBinders is a new European consortium aiming to establish a comprehensive resource of well-characterized affinity reagents, including but not limited to antibodies, for analysis of the human proteome. Given the huge diversity of the proteome, the scale of the project is potentially immense but nevertheless feasible in the context of a pan-European or even worldwide coordination.

Of Folding and Function: Understanding Active-Site Context through Metalloenzyme Design

In the emerging field of biomolecular design, the introduction of metal-binding sites into loop or turn regions of known protein scaffolds has been utilized to create unique metalloprotein and metallopeptide systems for study. This Forum Article highlights examples of the modular-turn-substitution approach to design and the range of structural and mechanistic questions to which this tool can be applied. Examples from the authors' laboratory are given to show that lanthanide-binding metallopeptides, and now a full metallohomeodomain, can be generated by modular substitution of a Ca-binding EF-hand loop into the unrelated scaffold, the engrailed helix-turn-helix motif. We have previously shown that these peptides bind trivalent Ln(III) ions and promote DNA and phosphate hydrolysis, the targeted function. Here, a series of chimeric peptides are presented that differ only in the ninth loop position [given in parentheses; Peptides P3N (Asn), P3E (Glu), P3A (Ala), and P3W(D) (Asp]. This residue, a putative second-shell ligand stabilizing a coordinated water, was found to influence not only metal affinity but also peptide folding. The affinity for Tb(III) was determined by Trp-Tb fluorescence resonance energy transfer and followed the order Ka = P3W(D) > P3A approximately P3E > P3N. However, circular dichroism (CD) titrations with EuCl3 showed that only P3W(D) and P3N folded to any extent upon metal binding, indicating that the Asp/Asn side chains stabilize the central loop structure and thus propagate folding of the peripheral helices, whereas neither Ala nor Glu appears to be interacting with the metal to organize the loop. Finally, we investigated the longer range context of a given loop substitution by cloning and expressing a lanthanide-binding homeodomain (C2), whose loop insertion sequence is analogous to that of peptide P3W(D). We find by CD that apo-C2 has a significant helical structure (approximately 25% alphahelicity), which increases further upon the addition of Tb(III) (approximately 32% alpha helicity). The protein's Tb(III) affinity is similar to that of the chimeric peptides. However, unlike previously reported metallopeptides, we find that EuC2 does not appreciably promote phosphate or DNA cleavage, which suggests a difference in metal accessibility in the context of the full domain. We have demonstrated that substituting beta turns with metal-binding turns does not necessarily require homologous parental scaffolds or small flexible peptides but rather relies on the structural similarity of the motifs flanking the turn.

Site-specifically conjugated anti-HER2 Affibody molecules as one-step reagents for target expression analyses on cells and xenograft samples

Affibody molecules are a class of small and robust affinity proteins that can be generated to interact with a variety of antigens, thus having the potential to provide useful tools for biotechnological research and diagnostic applications. In this study, we have investigated Affibody-based reagents interacting specifically with the tyrosine kinase receptor HER2. A head-to-tail dimeric construct was site-specifically conjugated with different fluorescent and enzymatic groups resulting in reagents that were used for detection and quantification. The amount of cell surface expressed HER2 on eleven (11) well characterized cell lines was quantified relative to each other by flow cytometry and shown to correlate well with results from parallel analyses of HER2 mRNA levels measured by real-time PCR. Further, immunofluorescence microscopy studies of the cell lines and immunohistochemical analyses of cryosections of HER2 expressing SKOV-3 xenografts showed strong staining of the plasma membrane of tumor cells with little background staining. Full-length HER2 protein could also be efficiently recovered from a cell extract by an immunoprecipitation procedure, using an Affibody ligand-based resin. These novel non-IgG derived reagents could be used to detect and quantify HER2 expression. By adapting the methods for use with Affibody molecules binding to other cell surface receptors, it is anticipated that also these receptors can be detected and quantified in a similar manner.

Adenovirus type 5 fiber knob domain has a critical role in fiber protein synthesis and encapsidation

Adenovirus serotype 5 (Ad5) vectors carrying knobless fibers designed to remove their natural tropism were found to have a lower fiber content than recombinant Ad5 with wild-type (WT) capsid, implying a role for the knob-coding sequence or/and the knob domain in fiber encapsidation. Experimental data using a variety of fiber gene constructs showed that the defect did not occur at the fiber mRNA level, but at the protein level. Knobless fiber proteins were found to be synthesized at a significant slower rate compared with knob-carrying fibers, and the trimerization process of knobless fibers paralleled their slow rate of synthesis. A recombinant Ad5 diploid for the fiber gene (referred to as Ad5/R7-ZZwt/E1 : WT-fiber) was constructed to analyse the possible rescue of the knobless low-fiber-content phenotype by co-expression of WT fiber. Ad5/R7-ZZwt/E1 : WT-fiber contained a knobless fiber gene in its natural location (L5) in the viral genome and an additional WT fiber gene in an ectopic position in E1. Knobless fiber was still synthesized at low levels compared with the co-expressed E1 : WT fiber and the recovery of the two fiber species in virus progeny reflected their respective amounts in the infected cells. Our results suggested that deletion of the fiber knob domain had a negative effect on the translation of the fiber mRNA and on the intracellular concentration of fiber protein. They also suggested that the knob control of fiber protein synthesis and encapsidation occurred as aciseffect, which was not modified by WT fiber protein providedin transby the same Ad5 genome.

Antibody binding loop insertions as diversity elements

In the use of non-antibody proteins as affinity reagents, diversity has generally been derived from oligonucleotide-encoded random amino acids. Although specific binders of high-affinity have been selected from such libraries, random oligonucleotides often encode stop codons and amino acid combinations that affect protein folding. Recently it has been shown that specific antibody binding loops grafted into heterologous proteins can confer the specific antibody binding activity to the created chimeric protein. In this paper, we examine the use of such antibody binding loops as diversity elements. We first show that we are able to graft a lysozyme-binding antibody loop into green fluorescent protein (GFP), creating a fluorescent protein with lysozyme-binding activity. Subsequently we have developed a PCR method to harvest random binding loops from antibodies and insert them at predefined sites in any protein, using GFP as an example. The majority of such GFP chimeras remain fluorescent, indicating that binding loops do not disrupt folding. This method can be adapted to the creation of other nucleic acid libraries where diversity is flanked by regions of relative sequence conservation, and its availability sets the stage for the use of antibody loop libraries as diversity elements for selection experiments.

Selection and characterization of Affibody ligands binding to Alzheimer amyloid beta peptides

Affibody (Affibody) ligands specific for human amyloid beta (Abeta) peptides (40 or 42 amino acid residues in size), involved in the progress of Alzheimer's disease, were selected by phage display technology from a combinatorial protein library based on the 58-amino acid residue staphylococcal protein A-derived Z domain. Post-selection screening of 384 randomly picked clones, out of which 192 clones were subjected to DNA sequencing and clustering, resulted in the identification of 16 Affibody variants that were produced and affinity purified for ranking of their binding properties. The two most promising Affibody variants were shown to selectively and efficiently bind to Abeta peptides, but not to the control proteins. These two Affibody ligands were in dimeric form (to gain avidity effects) coupled to affinity resins for evaluation as affinity devices for capture of Abeta peptides from human plasma and serum. It was found that both ligands could efficiently capture Abeta that were spiked (100 microgml(-1)) to plasma and serum samples. A ligand multimerization problem that would yield suboptimal affinity resins, caused by a cysteine residue present at the binding surface of the Affibody ligands, could be circumvented by the generation of second-generation Affibody ligands (having cysteine to serine substitutions). In an epitope mapping effort, the preferred binding site of selected Affibody ligands was mapped to amino acids 30-36 of Abeta, which fortunately would indicate that the Affibody molecules should not bind the amyloid precursor protein (APP). In addition, a significant effort was made to analyze which form of Abeta (monomer, dimer or higher aggregates) that was most efficiently captured by the selected Affibody ligand. By using Western blotting and a dot blot assay in combination with size exclusion chromatography, it could be concluded that selected Affibody ligands predominantly bound a non-aggregated form of analyzed Abeta peptide, which we speculate to be dimeric Abeta. In conclusion, we have successfully selected Affibody ligands that efficiently capture Abeta peptides from human plasma and serum. The potential therapeutic use of these optimized ligands for extracorporeal capture of Abeta peptides in order to slow down or reduce amyloid plaque formation, is discussed.

Antagonists to human and mouse vascular endothelial growth factor receptor 2 generated by directed protein evolution in vitro

Using directed in vitro protein evolution, we generated proteins that bound and antagonized the function of vascular endothelial growth factor receptor 2 (VEGFR2). Binders to human VEGFR2 (KDR) with 10-200 nM affinities were selected by using mRNA display from a library (10(13) variants) based on the tenth human fibronectin type III domain (10Fn3) scaffold. Subsequently, a single KDR binding clone (K(d) = 11 nM) was subjected to affinity maturation. This yielded improved KDR binding molecules with affinities ranging from 0.06 to 2 nM. Molecules with dual binding specificities (human/mouse) were also isolated by using both KDR and Flk-1 (mouse VEGFR2) as targets in selection. Proteins encoded by the selected clones bound VEGFR2-expressing cells and inhibited their VEGF-dependent proliferation. Our results demonstrate the potential of these inhibitors in the development of anti-angiogenesis therapeutics.

Three-dimensional organization of helices: design principles for nucleobase-functionalized beta-peptides

The construction and molecular recognition of various three-dimensional biomimetic structures is based on the predictable de novo design of artificial molecules. In this regard beta-peptides are especially interesting, since stable secondary structures are obtained already with short sequences; one of them is the 14-helix in which every third residue has the same orientation. The covalent functionalization of every third 14-helix side chain with nucleobases was used for a reversible organization of two helices based on nucleobase pairing. A series of beta-peptides with various nucleobase sequences was synthesized and the stability of double strand formation was investigated. As few as four nucleobases are sufficient for considerable duplex stability. The stability of base pairing was examined by temperature-dependent UV spectroscopy and the formation of the 14-helix was confirmed by circular dichroism (CD) spectroscopy. The preferred strand orientation of complementary-nucleobase-modified beta-peptide helices was investigated as well as the influence of helix content on the duplex stability. The preorganization of a 14-helix in regard to double-strand recognition was tuned by the sequential order of polar beta-amino acids or by the amount of 2-aminocyclohexanecarboxylic acid units incorporated, which are known to facilitate 14-helix formation, respectively.

Thermodynamics of Folding and Binding in an Affibody:Affibody Complex

Affibody binding proteins are selected from phage-displayed libraries of variants of the 58 residue Z domain. Z(Taq) is an affibody originally selected as a binder to Taq DNA polymerase. The anti-Z(Taq) affibody was selected as a binder to Z(Taq) and the Z(Taq):anti-Z(Taq) complex is formed with a dissociation constant K(d)=0.1 microM. We have determined the structure of the Z(Taq):anti-Z(Taq) complex as well as the free state structures of Z(Taq) and anti-Z(Taq) using NMR. Here we complement the structural data with thermodynamic studies of Z(Taq) and anti-Z(Taq) folding and complex formation. Both affibody proteins show cooperative two-state thermal denaturation at melting temperatures T(M) approximately 56 degrees C. Z(Taq):anti-Z(Taq) complex formation at 25 degrees C in 50 mM NaCl and 20 mM phosphate buffer (pH 6.4) is enthalpy driven with DeltaH degrees (bind) = -9.0 (+/-0.1) kcal mol(-1)(.) The heat capacity change DeltaC(P) degrees (,bind)=-0.43 (+/-0.01) kcal mol(-1) K(-1) is in accordance with the predominantly non-polar character of the binding surface, as judged from calculations based on changes in accessible surface areas. A further dissection of the small binding entropy at 25 degrees C (-TDeltaS degrees (bind) = -0.6 (+/-0.1) kcal mol(-1)) suggests that a favourable desolvation of non-polar surface is almost completely balanced by unfavourable conformational entropy changes and loss of rotational and translational entropy. Such effects can therefore be limiting for strong binding also when interacting protein components are stable and homogeneously folded. The combined structure and thermodynamics data suggest that protein properties are not likely to be a serious limitation for the development of engineered binding proteins based on the Z domain.

Structural basis for molecular recognition in an affibody:affibody complex

Affibody molecules constitute a class of engineered binding proteins based on the 58-residue three-helix bundle Z domain derived from staphylococcal protein A (SPA). Affibody proteins are selected as binders to target proteins by phage display of combinatorial libraries in which typically 13 side-chains on the surface of helices 1 and 2 in the Z domain have been randomized. The Z(Taq):anti-Z(Taq) affibody-affibody complex, consisting of Z(Taq), originally selected as a binder to Taq DNA polymerase, and anti-Z(Taq), selected as binder to Z(Taq), is formed with a dissociation constant K(d) approximately 100 nM. We have determined high-precision solution structures of free Z(Taq) and anti-Z(Taq), and the Z(Taq):anti-Z(Taq) complex under identical experimental conditions (25 degrees C in 50 mM NaCl with 20 mM potassium phosphate buffer at pH 6.4). The complex is formed with helices 1 and 2 of anti-Z(Taq) in perpendicular contact with helices 1 and 2 of Z(Taq). The interaction surface is large ( approximately 1670 A(2)) and unusually non-polar (70 %) compared to other protein-protein complexes. It involves all varied residues on anti-Z(Taq), most corresponding (Taq DNA polymerase binding) side-chains on Z(Taq), and several additional side-chain and backbone contacts. Other notable features include a substantial rearrangement (induced fit) of aromatic side-chains in Z(Taq) upon binding, a close contact between glycine residues in the two subunits that might involve aliphatic glycine Halpha to backbone carbonyl hydrogen bonds, and four hydrogen bonds made by the two guanidinium N(eta)H(2) groups of an arginine side-chain. Comparisons of the present structure with other data for affibody proteins and the Z domain suggest that intrinsic binding properties of the originating SPA surface might be inherited by the affibody binders. A thermodynamic characterization of Z(Taq) and anti-Z(Taq) is presented in an accompanying paper.

Ribosome display for improved biotherapeutic molecules

Ribosome display presents an innovative in vitro technology for the rapid isolation and evolution of high-affinity peptides or proteins. Displayed proteins are bound to and recovered from target molecules in multiple rounds of selection in order to enrich for specific binding proteins. No transformation step is necessary, which could lead to a loss of library diversity. A cycle of display and selection can be performed in one day, enabling the existing gene repertoire to be rapidly scanned. Proteins isolated from the panning rounds can be further modified through random or directed molecular evolution for affinity maturation, as well as selected for characteristics such as protein stability, folding and functional activity. Recently, the field of display technologies has become more prominent due to the generation of new scaffolds for ribosome display, isolation of high-affinity human antibodies by phage display, and their implementation in the discovery of novel protein-protein interactions. Applications for this technology extend into the broad field of antibody engineering, proteomics, and synthetic enzymes for diagnostics and therapeutics in cancer, autoimmune and infectious diseases, neurodegenerative diseases and inflammatory disorders. This review highlights the role of ribosome display in drug discovery, discusses advantages and disadvantages of the system, and attempts to predict the future impact of ribosome display technology on the development of novel engineered biopharmaceutical products for biological therapies.

Tumor Imaging Using a Picomolar Affinity HER2 Binding Affibody Molecule

The detection of cell-bound proteins that are produced due to aberrant gene expression in malignant tumors can provide important diagnostic information influencing patient management. The use of small radiolabeled targeting proteins would enable high-contrast radionuclide imaging of cancers expressing such antigens if adequate binding affinity and specificity could be provided. Here, we describe a HER2-specific 6 kDa Affibody molecule (hereinafter denoted Affibody molecule) with 22 pmol/L affinity that can be used for the visualization of HER2 expression in tumors in vivo using gamma camera. A library for affinity maturation was constructed by re-randomization of relevant positions identified after the alignment of first-generation variants of nanomolar affinity (50 nmol/L). One selected Affibody molecule, Z(HER2:342) showed a >2,200-fold increase in affinity achieved through a single-library affinity maturation step. When radioiodinated, the affinity-matured Affibody molecule showed clear, high-contrast visualization of HER2-expressing xenografts in mice as early as 6 hours post-injection. The tumor uptake at 4 hours post-injection was improved 4-fold (due to increased affinity) with 9% of the injected dose per gram of tissue in the tumor. Affibody molecules represent a new class of affinity molecules that can provide small sized, high affinity cancer-specific ligands, which may be well suited for tumor imaging.

Peptide aptamers as guides for small-molecule drug discovery

Peptide aptamers are combinatorial protein reagents that bind to target proteins with a high specificity and a strong affinity. By so doing, they can modulate the function of their cognate targets. Because peptide aptamers introduce perturbations that are similar to those caused by therapeutic molecules, their use identifies and/or validates therapeutic targets with a higher confidence level than is typically provided by methods that act upon protein expression levels. The unbiased combinatorial nature of peptide aptamers enables them to 'decorate' numerous polymorphic protein surfaces, whose biological relevance can be inferred through characterization of the peptide aptamers. Bioactive aptamers that bind druggable surfaces can be used in displacement screening assays to identify small-molecule hits to the surfaces. The peptide aptamer technology has a positive impact on drug discovery by addressing major causes of failure and by offering a seamless, cost-effective process from target validation to hit identification.

Structures of in Vitro Evolved Binding Sites on Neocarzinostatin Scaffold Reveal Unanticipated Evolutionary Pathways

We have recently applied in vitro evolution methods to create in Neocarzinostatin a new binding site for a target molecule unrelated to its natural ligand. The main objective of this work was to solve the structure of some of the selected binders in complex with the target molecule: testosterone. Three proteins (1a.15, 3.24 and 4.1) were chosen as representative members of sequence families that came out of the selection process within different randomization schemes. In order to evaluate ligand-induced conformational adaptation, we also determined the structure of one of the proteins (3.24) in the free and complexed forms. Surprisingly, all these mutants bind not one but two molecules of testosterone in two very different ways. The 3.24 structure revealed that the protein spontaneously evolved in the system to bind two ligand molecules in one single binding crevice. These two binding sites are formed by substituted as well as by non-variable side-chains. The comparison with the free structure shows that only limited structural changes are observed upon ligand binding. The X-ray structures of the complex formed by 1a.15 and 4.1 Neocarzinostatin mutants revealed that the two variants form very similar dimers. These dimers were observed neither for the uncomplexed variants nor for wild-type Neocarzinostatin but were shown here to be induced by ligand binding. Comparison of the three complexed forms clearly suggests that these unanticipated structural responses resulted from the molecular arrangement used for the selection experiments.

A new generation of protein display scaffolds for molecular recognition

Engineered antibodies and their fragments are invaluable tools for a vast range of biotechnological and pharmaceutical applications. However, they are facing increasing competition from a new generation of protein display scaffolds, specifically selected for binding virtually any target. Some of them have already entered clinical trials. Most of these nonimmunoglobulin proteins are involved in natural binding events and have amazingly diverse origins, frameworks, and functions, including even intrinsic enzyme activity. In many respects, they are superior over antibody-derived affinity molecules and offer an ever-extending arsenal of tools for, e.g., affinity purification, protein microarray technology, bioimaging, enzyme inhibition, and potential drug delivery. As excellent supporting frameworks for the presentation of polypeptide libraries, they can be subjected to powerful in vitro or in vivo selection and evolution strategies, enabling the isolation of high-affinity binding reagents. This article reviews the generation of these novel binding reagents, describing validated and advanced alternative scaffolds as well as the most recent nonimmunoglobulin libraries. Characteristics of these protein scaffolds in terms of structural stability, tolerance to multiple substitutions, ease of expression, and subsequent applications as specific targeting molecules are discussed. Furthermore, this review shows the close linkage between these novel protein tools and the constantly developing display, selection, and evolution strategies using phage display, ribosome display, mRNA display, cell surface display, or IVC (in vitro compartmentalization). Here, we predict the important role of these novel binding reagents as a toolkit for biotechnological and biomedical applications.

Rapid selection of specific MAP kinase-binders from designed ankyrin repeat protein libraries

We describe here the rapid selection of specific MAP-kinase binders from a combinatorial library of designed ankyrin repeat proteins (DARPins). A combined in vitro/in vivo selection approach, based on ribosome display and the protein fragment complementation assay (PCA), yielded a large number of different binders that are fully functional in the cellular cytoplasm. Ribosome-display selection pools of four successive selection rounds were examined to monitor the enrichment of JNK2-specific DARPins. Surprisingly, only one round of ribosome display with subsequent PCA selection of this pool was necessary to isolate a first specific binder with micromolar affinity. After only two rounds of ribosome-display selection followed by PCA, virtually all DARPins showed JNK2-specific binding, with affinities in the low nanomolar range. The enrichment factor of ribosome display thus approaches 10(5) per round. In a second set of experiments, similar results were obtained with the kinases JNK1 and p38 as targets. Again, almost all investigated DARPins obtained after two rounds of ribosome display showed specific binding to the targets used, JNK1 or p38. In all three selection experiments the identified DARPins possess very high specificity for the target kinase. Taken together, the combination of ribosome display and PCA selections allowed the identification of large pools of binders at unparalleled speed. Furthermore, DARPins are applicable in intracellular selections and immunoprecipitations from the extract of eukaryotic cells.

Artificial, non-antibody binding proteins for pharmaceutical and industrial applications

Using combinatorial chemistry to generate novel binding molecules based on protein frameworks ('scaffolds') is a concept that has been strongly promoted during the past five years in both academia and industry. Non-antibody recognition proteins derive from different structural families and mimic the binding principle of immunoglobulins to varying degrees. In addition to the specific binding of a pre-defined target, these proteins provide favourable characteristics such as robustness, ease of modification and cost-efficient production. The broad spectrum of potential applications, including research tools, separomics, diagnostics and therapy, has led to the commercial exploitation of this technology by various small- and medium-sized companies. It is predicted that scaffold-based affinity reagents will broaden and complement applications that are presently covered by natural or recombinant antibodies. Here, we provide an overview on current approaches in the biotech industry, considering both scientific and commercial aspects.

Redesigning Bacillus thuringiensis Cry1Aa toxin into a mosquito toxin

The Bacillus thuringiensis crystal protein Cry1Aa is normally selectively active to caterpillar larvae. Through rational design, toxicity (microg/ml) to the mosquito Culex pipiens was introduced by selected deletions and substitutions of the loop residues of domain II. Toxicity to its natural target Manduca sexta was concomitantly abolished. The successful grafting of the alternate mosquito toxicity onto the original lepidopteran Cry1Aa toxin demonstrates the possibility of designing and engineering a desired toxicity into any toxin of a common scaffold by reshaping the receptor binding region with desired specificities.

Evolution of a carbohydrate binding module into a protein-specific binder

A carbohydrate binding module, CBM4-2, derived from the xylanase (Xyn 10A) of Rhodothermus marinus has been used as a scaffold for molecular diversification. Its binding specificity has been evolved to recognise a quite different target, a human monoclonal IgG4. In order to understand the basis for this drastic change in specificity we have further investigated the target recognition of the IgG4-specific CBMs. Firstly, we defined that the structure target recognised by the selected CBM-variants was the protein and not the carbohydrates attached to the glycoprotein. We also identified key residues involved in the new specificity and/or responsible for the swap in specificity, from xylan to human IgG4. Specific changes present in all these CBMs included mutations not introduced in the design of the library from which the specific clones were selected. Reversion of such mutations led to a complete loss of binding to the target molecule, suggesting that they are critical for the recognition of human IgG4. Together with the mutations introduced at will, they had transformed the CBM scaffold into a protein binder. We have thus shown that the scaffold of CBM4-2 is able to harbour molecular recognition for either carbohydrate or protein structures.

Affinity chromatography matures as bioinformatic and combinatorial tools develop

Affinity chromatography has the reputation of a more expensive and less robust than other types of liquid chromatography. Furthermore, the technique is considered to stand a modest chance of large-scale purification of proteinaceous pharmaceuticals. This perception is changing because of the pressure for quality protein therapeutics, and the realization that higher returns can be expected when ensuring fewer purification steps and increased product recovery. These developments necessitated a rethinking of the protein purification processes and restored the interest for affinity chromatography. This liquid chromatography technique is designed to offer high specificity, being able to safely guide protein manufactures to successfully cope with the aforementioned challenges. Affinity ligands are distinguished into synthetic and biological. These can be generated by rational design or selected from ligand libraries. Synthetic ligands are generated by three methods. The rational method features the functional approach and the structural template approach. The combinatorial method relies on the selection of ligands from a library of synthetic ligands synthesized randomly. The combined method employs both methods, that is, the ligand is selected from an intentionally biased library based on a rationally designed ligand. Biological ligands are selected by employing high-throughput biological techniques, e.g. phage- and ribosome-display for peptide and microprotein ligands, in addition to SELEX for oligonucleotide ligands. Synthetic mimodyes and chimaeric dye-ligands are usually designed by rational approaches and comprise a chloro-triazinlyl scaffold. The latter substituted with various amino acids, carbocyclic, and heterocyclic groups, generates libraries from which synthetic ligands can be selected. A 'lead' compound may help to generating a 'focused' or 'biased' library. This can be designed by various approaches, e.g.: (i) using a natural ligand-protein complex as a template; (ii) applying the principle of complementarity to exposed residues of the protein structure; and (iii) mimicking directly a natural biological recognition interaction. Affinity ligands, based on the peptide structure, can be peptides, peptide-mimetic derivatives (<30 monomers) and microproteins (e.g. 25-200 monomers). Microprotein ligands are selected from biological libraries constructed of variegated protein domains, e.g. minibody, Kunitz, tendamist, cellulose-binding domain, scFv, Cytb562, zinc-finger, SpA-analogue (Z-domain).

Anticalins as an alternative to antibody technology

Anticalins are a class of engineered ligand-binding proteins that are based on the lipocalin scaffold. The lipocalin protein architecture is characterised by a compact, rigid beta-barrel that supports four structurally hypervariable loops. These loops form a pocket for the specific complexation of differing target molecules. Natural lipocalins occur in human plasma and body fluids, where they usually function in the transport of vitamins, steroids or metabolic compounds. Using targeted mutagenesis of the loop region and biochemical selection techniques, variants with novel ligand specificities, both for low-molecular weight substances and for macromolecular protein targets, can be generated. Due to their small size, typically between 160 and 180 residues, robust tertiary structure and composition of a single polypeptide chain, such 'anticalins' provide several advantages over antibodies concerning economy of production, stability during storage, faster pharmacokinetics and better tissue penetration. At present, anticalins offer three major mechanisms for therapeutic application: (i) as antidotes, by quickly removing toxic or otherwise irritating compounds from the human body; (ii) as antagonists, for example, by binding to cellular receptors and blocking them from interaction with their natural signalling molecules; (iii) as tissue-targeting vehicles, by addressing toxic molecules or enzymes to disease-related cell surface proteins.

Towards a human proteome atlas: High-throughput generation of mono-specific antibodies for tissue profiling

A great need exists for the systematic generation of specific antibodies to explore the human proteome. Here, we show that antibodies specific to human proteins can be generated in a high-throughput manner involving stringent affinity purification using recombinant protein epitope signature tags (PrESTs) as immunogens and affinity-ligands. The specificity of the generated affinity reagents, here called mono-specific antibodies (msAb), were validated with a novel protein microarray assay. The success rate for 464 antibodies generated towards human proteins was more than 90% as judged by the protein array assay. The antibodies were used for parallel profiling of patient biopsies using tissue microarrays generated from 48 human tissues. Comparative analysis with well-characterized monoclonal antibodies showed identical or similar specificity and expression patterns. The results suggest that a comprehensive atlas containing extensive protein expression and subcellular localization data of the human proteome can be generated in an efficient manner with mono-specific antibodies.

Fine affinity discrimination by normalized fluorescence activated cell sorting in staphylococcal surface display

We have investigated a staphylococcal surface display system for its potential future use as a protein library display system in combinatorial biochemistry. Efficient affinity-based selections require a system capable of fine affinity discrimination of closely related binders to minimize the loss of potentially improved variants. In this study, a significant breakthrough was achieved to avoid biases due to potential cell-to-cell variations in surface expression levels, since it was found that a generic protein tag, present within the displayed recombinant surface proteins on the cells, could be successfully employed to obtain normalization of the target-binding signal. Four mutated variants of a staphylococcal protein A domain with different affinity to human IgG were successfully expressed on the surface of recombinant Staphylococcus carnosus cells. The system was evaluated for affinity-based cell sorting experiments, where cell-displayed protein A domains with an 8-fold difference in target affinity were mixed at a ratio of 1:1000 and sorted using FACS. Enrichment factors around 140-fold were obtained from a single round of sorting under normal library sorting conditions when the top 0.1% fraction having the highest antigen binding to surface expression level ratio was sorted. The results demonstrate that the system would have a potential as a selection system in protein library display applications, and the normalization strategy should indeed make it possible to achieve fine affinity discriminations in future library selections.

A human protein atlas for normal and cancer tissues based on antibody proteomics

Antibody-based proteomics provides a powerful approach for the functional study of the human proteome involving the systematic generation of protein-specific affinity reagents. We used this strategy to construct a comprehensive, antibody-based protein atlas for expression and localization profiles in 48 normal human tissues and 20 different cancers. Here we report a new publicly available database containing, in the first version, approximately 400,000 high resolution images corresponding to more than 700 antibodies toward human proteins. Each image has been annotated by a certified pathologist to provide a knowledge base for functional studies and to allow queries about protein profiles in normal and disease tissues. Our results suggest it should be possible to extend this analysis to the majority of all human proteins thus providing a valuable tool for medical and biological research.

Perspectives for systematic in vitro antibody generation

After the completion and refinement of the human genome, the characterization of individual gene products in respect of their functions, their modifications, their cellular localization and regulation in both space and time has generated an increased demand for antibodies for their analysis. Taking into account that the human genome contains approximately 25,000 genes, and that their products are found in different splice variants and produce proteins with post-translational modifications, it can be estimated that at least 100,000 different protein products have to be investigated to gain a complete picture of what's going on in the proteome of a cell. Antibodies are preferred tools helping with the characterization and detection of proteins as well as with elucidating their individual functions. The generation of antibodies to all available human protein products by immunization and/or the hybridoma technology is not only logistically and financially enduring, but may prove to be a difficult task, as quite a number of interesting targets may evade the immune response of experimental animals, for example, allosteric variants dependent on fragile interactions to cofactors, highly conserved antigens etc. For this reason, alternative methods for the generation of antibodies have to supplement these approaches. In vitro methods for antibody generation are seen to offer this capability. In addition, they may provide a cost effective and large scale production alternative for detection reagents for the research community in their own right. Among in vitro techniques, phage display has been evolved as the most efficient option for tackling this problem and approaches optimised for automation are emerging. Maximum benefit for proteomic research could be generated by judicious and preferably international coordination of the ongoing efforts to combine the strengths of the well established animal based approaches and the novel opportunities offered by in vitro methods.

Antibody mimics based on human fibronectin type three domain engineered for thermostability and high-affinity binding to vascular endothelial growth factor receptor two

The tenth human fibronectin type three domain ((10)Fn3) is a small (10 kDa), extremely stable and soluble protein with an immunoglobulin-like fold, but without cysteine residues. Selections from (10)Fn3-based libraries of proteins with randomized loops have yielded high-affinity, target-specific antibody mimics. However, little is known about the biophysical properties of such antibody mimics, which will determine their suitability for in vitro and medical applications. We characterized target binding and biophysical properties of two related (10)Fn3-based antibody mimics that bind vascular endothelial growth factor receptor two (VEGF-R2). The first antibody mimic, which has a dissociation constant (K(d)) of 13 nM, is highly stable [melting temperature (T(m))=62 degrees C] and soluble, whereas the second, which binds VEGF-R2 with 40 x higher affinity, is less stable (T(m) < 40 degrees C) and relatively insoluble. We used our understanding of these two (10)Fn3 derivatives and of wild-type (10)Fn3 structure to engineer the next generation of antibody mimics, which have an improved combination of high affinity (K(d)=0.59 nM), stability (T(m)=53 degrees C) and solubility. Our findings illustrate that (10)Fn3-based antibody mimics can be engineered for favorable biophysical properties even when 20% of the wild-type (10)Fn3 sequence is mutated in order to satisfy target-binding requirements.

Display of somatostatin-related peptides in the complementarity determining regions of an antibody light chain

Peptide display in antibody complementarity determining regions (CDRs) offers several advantages over other peptide display systems including the potential to graft heterologous peptide sequences into multiple positions in the same backbone molecule. Despite the presence of six CDRs in an antibody variable domain, the majority of insertions reported have been made in heavy chain CDR3 (h-CDR3) which may be explained in part by the highly variable length and sequence diversity found in h-CDR3 in native antibodies. The ability to graft peptide sequences into CDRs is restricted by amino acids in these loops that make structural contacts to framework regions or are oriented towards the hydrophobic interior and are important for the proper folding of the antibody. To identify such positions in human kappa-light chain CDR1 (kappa-CDR1) and CDR2 (kappa-CDR2), we performed alignments of 1330 kappa-light chain variable region amino acid sequences and 19 variable region X-ray crystal structures. From analyses of these alignments, we predict insertion points where sequences can be grafted into kappa-CDR1 and kappa-CDR2 to prepare synthetic antibody molecules. We then tested these predictions by inserting somatostatin and somatostatin-related sequences into kappa-CDR1 and kappa-CDR2, and analyzing the expression and ability of the modified antibodies to bind to membranes containing somatostatin receptor 5. These results expand the repertoire of CDRs that can be used for the display of heterologous peptides in the CDRs of antibodies.

Affibody protein capture microarrays: Synthesis and evaluation of random and directed immobilization of affibody molecules

Affibody molecules, 58-amino acid three-helix bundle proteins directed to different targets by combinatorial engineering of staphylococcal protein A, were used as capture ligands on protein microarrays. An evaluation of slide types and immobilization strategies was performed to find suitable conditions for microarray production. Two affibody molecules, Z(Taq) and Z(IgA), binding Taq DNA polymerase and human IgA, respectively, were synthesized by solid phase peptide synthesis using an orthogonal protection scheme, allowing incorporation of selective immobilization handles. The resulting affibody variants were used for random surface immobilization (through amino groups) or oriented surface immobilization (through cysteine or biotin coupled to the side chain of Lys58). Evaluation of the immobilization techniques was carried out using both a real-time surface plasmon resonance biosensor system and a microarray system using fluorescent detection of Cy3-labeled target protein. The results from the biosensor analyses showed that directed immobilization strategies significantly improved the specific binding activity of affibody molecules. However, in the microarray system, random immobilization onto carboxymethyl dextran slides and oriented immobilization onto thiol dextran slides resulted in equally good signal intensities, whereas biotin-mediated immobilization onto streptavidin-coated slides produced slides with lower signal intensities and higher background staining. For the best slides, the limit of detection was 3 pM for IgA and 30 pM for Taq DNA polymerase.

Chemical Synthesis of Triple-Labelled Three-Helix Bundle Binding Proteins for Specific Fluorescent Detection of Unlabelled Protein

Site-specifically triple-labelled three-helix bundle affinity proteins (affibody molecules) have been produced by total chemical synthesis. The 58 aa affinity proteins were assembled on an automated peptide synthesizer, followed by manual on-resin incorporation of three different reporter groups. An orthogonal protection strategy was developed for the site-specific introduction of 5-(2-aminethylamino)-1-naphthalenesulfonic acid (EDANS) and 6-(7-nitrobenzofurazan-4-ylamino)-hexanoic acid (NBDX), constituting a donor/acceptor pair for fluorescence resonance energy transfer (FRET), and a biotin moiety, used for surface immobilization. Circular dichroism and biosensor studies of the synthetic proteins and their recombinant counterparts revealed that the synthetic proteins were folded and retained their binding specificities. The biotin-conjugated protein could be immobilized onto a streptavidin surface without loss of activity. The synthetic, doubly fluorescent-labelled affinity proteins were shown to function as fluorescent biosensors in an assay for the specific detection of unlabelled human IgG and IgA.

New Binding Specificities Derived from Min-23, a Small Cystine-Stabilized Peptidic Scaffold†

The randomization of both internal and surface residues in small protein domains followed by selection from a display library is emerging as a powerful strategy to obtain novel binding specificities. Small and stable scaffold motifs observed in disulfide-rich proteins are attractive because they are small, stable, and accessible to chemical synthesis. The elementary structural motif found in the squash trypsin inhibitor EETI-II (Ecballium elaterium trypsin inhibitor) is the cystine stabilized beta-sheet (CSB) motif, found in nearly 50% of all known small disulfide-rich protein families. We have used Min-23, a short 23-residue peptide containing the CSB motif and shown to be a stable autonomous folding unit and one of the smallest scaffolds described to date, as a scaffold for selection of new binding ligands. We demonstrate that the core CSB motif in Min-23 is permissive to loop insertion, using peptide epitopes from hemagglutinin (HA) and Gla-protein (E). A phage library of more than 10(8) different clones has been constructed by insertion of a randomized sequence on a beta-turn of the Min-23 peptide. The selection of this library on a variety of 7 different targets allowed the isolation of 21 new specific binders, confirming the potential of Min-23 as a scaffold for the development of new ligands. The derived library is able to provide a wide range of novel compounds with possible applications in various biological and pharmaceutical areas.

Antibody-based Proteomics for Human Tissue Profiling

Here, we describe the use of antibody-based proteomics involving the generation of protein-specific antibodies to functionally explore the human proteome. The antibodies can be used for analysis of corresponding proteins in a wide range of assay platforms, including i) immunohistochemistry for detailed tissue profiling, ii) specific affinity reagents for various functional protein assays, and iii) capture ("pull-down") reagents for purification of specific proteins and their associated complexes for structural and biochemical analyses. In this review, the use of antibodies for such analysis will be discussed with focus on the possibility to create a descriptive and comprehensive protein atlas for tissue distribution and subcellular localization of human proteins in both normal and disease tissues.

Engineering High Affinity Superantigens by Phage Display

Protein L (PpL) is a B-cell superantigen from Peptostreptococcus magnus known to bind to mammalian Vkappa light chains. PpL from P.magnus strain 312 comprises five homologous immunoglobulin (Ig) binding domains. We first analysed the binding of the individual domains (B1-B5) of PpL(312) to human Vkappa light chains (huVkappa) subtypes 1 (huVkappaI) and 3 (huVkappaIII). Using a combination of rational design and phage selection we isolated mutants of the N-terminal B1 domain with a 14-fold increased affinity for huVkappa1 (B1kappa1) and >tenfold increased affinity for huVkappaIII (B1kappa3). We investigated the potential of the selected domains, in particular the B1kappa1 domain, as reagents in immunochemistry and immunotherapy. B1kappa1 proved a superior reagent than the wild-type domain, allowing up to tenfold more sensitive detection of human Vkappa antibody fragments in ELISA. A fusion protein of B1kappa1 with a human Vlambda antibody scFv fragment promoted the efficient recruitment of antibody encoded effector functions including complement, mononuclear phagocyte respiratory burst and phagocytosis through retargeting of IgGkappa and IgMkappa. Our results suggest that superantigens with improved affinity and/or specificity are easily accessible through protein engineering. Such engineered superantigens should prove useful as reagents in immunochemistry and may have potential as agents in immunotherapy.

Anticalins in Drug Development

Anticalins are a novel class of engineered ligand-binding proteins that are prepared from lipocalins--conventional plasma proteins in humans--via targeted random mutagenesis and selection against prescribed haptens or antigens. The first anticalins were selected to bind to small ligands, such as the cardioactive drug digoxin. Recently, libraries that also permit the generation of anticalins with high affinities and specificities for protein targets, especially disease-related cell-surface receptors, have been constructed. Anticalins are much smaller than antibodies or their antigen-binding fragments, lack glycosylation as well as immunological effector functions, and consist of a single, stably folded polypeptide chain. Thus, they offer benefits as biopharmaceuticals in several areas of medical therapy, for example as receptor antagonists or as effective antidotes against toxic compounds.