Complete biosynthesis of opioids in yeast

Establishing a versatile toolkit of flux enhanced strains and cell extracts for pathway prototyping

Building and optimizing biosynthetic pathways in engineered cells holds promise to address societal needs in energy, materials, and medicine, but it is often time-consuming. Cell-free synthetic biology has emerged as a powerful tool to accelerate design-build-test-learn cycles for pathway engineering with increased tolerance to toxic compounds. However, most cell-free pathway prototyping to date has been performed in extracts from wildtype cells which often do not have sufficient flux towards the pathways of interest, which can be enhanced by engineering. Here, to address this gap, we create a set of engineered Escherichia coli and Saccharomyces cerevisiae strains rewired via CRISPR-dCas9 to achieve high-flux toward key metabolic precursors; namely, acetyl-CoA, shikimate, triose-phosphate, oxaloacetate, α-ketoglutarate, and glucose-6-phosphate. Cell-free extracts generated from these strains are used for targeted enzyme screening in vitro. As model systems, we assess in vivo and in vitro production of triacetic acid lactone from acetyl-CoA and muconic acid from the shikimate pathway. The need for these platforms is exemplified by the fact that muconic acid cannot be detected in wildtype extracts provided with the same biosynthetic enzymes. We also perform metabolomic comparison to understand biochemical differences between the cellular and cell-free muconic acid synthesis systems (E. coli and S. cerevisiae cells and cell extracts with and without metabolic rewiring). While any given pathway has different interfaces with metabolism, we anticipate that this set of pre-optimized, flux enhanced cell extracts will enable prototyping efforts for new biosynthetic pathways and the discovery of biochemical functions of enzymes.

Systematic engineering pinpoints a versatile strategy for the expression of functional cytochrome P450 enzymes in Escherichia coli cell factories

Production of plant secondary metabolites in engineered microorganisms provides a scalable and sustainable alternative to their sourcing from nature or through chemical synthesis. However, the biosynthesis of many valuable plant-derived products relies on cytochromes P450 - enzymes notoriously difficult to express in microbes. To improve their expression in Escherichia coli, an arsenal of engineering strategies was developed, often paired with an extensive screening of enzyme variants. Here, attempting to identify a broadly applicable strategy, we systematically evaluated six common cytochrome P450 N-terminal modifications and their effect on in vivo activity of enzymes from the CYP79 and CYP83 families. We found that transmembrane domain truncation was the only modification with a significantly positive effect for all seven tested enzymes, increasing their product titres by 2- to 170-fold. Furthermore, when comparing the changes in the protein titre and product generation, we show that higher protein expression does not directly translate to higher in vivo activity, thus making the protein titre an unreliable screening target in the context of cell factories. We propose the transmembrane domain truncation as a first-line approach that enables the expression of wide range of highly active P450 enzymes in E. coli and circumvents the time-consuming screening process. Our results challenge the notion that the engineering strategy must be tailored for each individual cytochrome P450 enzyme and have the potential to simplify and accelerate the future design of E. coli cell factories.

Safety risks and ethical governance of biomedical applications of synthetic biology

Background: In recent years, biomedicine has witnessed rapid advancements in applying synthetic biology. While these advancements have brought numerous benefits to patients, they have also given rise to a series of safety concerns. Methods: This article provides a succinct overview of the current research on synthetic biology's application in biomedicine and systematically analyzes the safety risks associated with this field. Based on this analysis, the article proposes fundamental principles for addressing these issues and presents practical recommendations for ethical governance. Results: This article contends that the primary safety risks associated with the application of synthetic biology in biomedicine include participant safety, biosafety risks, and biosecurity risks. In order to effectively address these risks, it is essential to adhere to the principles of human-centeredness, non-maleficence, sustainability, and reasonable risk control. Guided by these fundamental principles and taking into account China's specific circumstances, this article presents practical recommendations for ethical governance, which include strengthening ethical review, promoting the development and implementation of relevant policies, improving legal safeguards through top-level design, and enhancing technical capabilities for biocontainment. Conclusion: As an emerging field of scientific technology, synthetic biology presents numerous safety risks and challenges in its application within biomedicine. In order to address these risks and challenges, it is imperative that appropriate measures be implemented. From a Chinese perspective, the solutions we propose serve not only to advance the domestic development of synthetic biology but also to contribute to its global progress.

Advancements in the Biotransformation and Biosynthesis of the Primary Active Flavonoids Derived from Epimedium

Epimedium is a classical Chinese herbal medicine, which has been used extensively to treat various diseases, such as sexual dysfunction, osteoporosis, cancer, rheumatoid arthritis, and brain diseases. Flavonoids, such as icariin, baohuoside I, icaritin, and epimedin C, are the main active ingredients with diverse pharmacological activities. Currently, most Epimedium flavonoids are extracted from Epimedium plants, but this method cannot meet the increasing market demand. Biotransformation strategies promised huge potential for increasing the contents of high-value Epimedium flavonoids, which would promote the full use of the Epimedium herb. Complete biosynthesis of major Epimedium flavonoids by microbial cell factories would enable industrial-scale production of Epimedium flavonoids. This review summarizes the structures, pharmacological activities, and biosynthesis pathways in the Epimedium plant, as well as the extraction methods of major Epimedium flavonoids, and advancements in the biotransformation and complete microbial synthesis of Epimedium flavonoids, which would provide valuable insights for future studies on Epimedium herb usage and the production of Epimedium flavonoids.

Induced production of specialized steroids by transcriptional reprogramming in Petunia hybrida

Plants produce specialized metabolites with defensive properties that are often synthesized through the coordinated regulation of metabolic genes by transcription factors in various biological contexts. In this study, we investigated the regulatory function of the transcription factor PhERF1 from petunia (Petunia hybrida), which belongs to a small group of ETHYLENE RESPONSE FACTOR (ERF) family members that regulate the biosynthesis of bioactive alkaloids and terpenoids in various plant lineages. We examined the effects of transiently overexpressing PhERF1 in petunia leaves on the transcriptome and metabolome, demonstrating the production of a class of specialized steroids, petuniolides, and petuniasterones in these leaves. We also observed the activation of many metabolic genes, including those involved in sterol biosynthesis, as well as clustered genes that encode new metabolic enzymes, such as cytochrome P450 oxidoreductases, 2-oxoglutarate-dependent dioxygenases, and BAHD acyltransferases. Furthermore, we determined that PhERF1 transcriptionally induces downstream metabolic genes by recognizing specific cis-regulatory elements in their promoters. This study highlights the potential of evolutionarily conserved transcriptional regulators to induce the production of specialized products through transcriptional reprogramming.

Reconstitution of Early Paclitaxel Biosynthetic Network

Paclitaxel is an anticancer therapeutic produced by the yew tree. Over the last two decades, a significant bottleneck in the reconstitution of early paclitaxel biosynthesis has been the propensity of heterologously expressed pathway cytochromes P450, including taxadiene 5α-hydroxylase (T5αH), to form multiple products. This diverts metabolic flux away from the paclitaxel precursor, taxadien-5α-ol, thus previous attempts of reconstitution have not yielded sufficient material for characterization, regardless of the heterologous host. Here, we structurally characterized four new products of T5αH, many of which appear to be over-oxidation of the primary mono-oxidized products. By tuning the promoter strength for T5αH expression, levels of these proposed byproducts decrease with a concomitant increase in the accumulation of taxadien-5α-ol by four-fold. This engineered system enabled the reconstitution of a six step biosynthetic pathway to produce isolatable 5α,10β-diacetoxy-taxadien-13α-ol. Furthermore, we showed that this pathway may function as a metabolic network rather than a linear pathway. The engineering of the paclitaxel biosynthetic network demonstrates that Taxus genes can coordinatively function for the biosynthetic production of key early stage paclitaxel intermediates and serves as a crucial platform for the discovery of the remaining biosynthetic genes.

Concise synthesis of (R)-reticuline and (+)-salutaridine by combining early-stage organic synthesis and late-stage biocatalysis

Efficient access to the morphinan scaffold remains a major challenge in both synthetic chemistry and biotechnology. Here, a biomimetic chemo-enzymatic strategy to synthesize the natural promorphinan intermediate (+)-salutaridine is demonstrated. By combining early-stage organic synthesis with enzymatic asymmetric key step transformations, the prochiral natural intermediate 1,2-dehydroreticuline was prepared and subsequently stereoselectively reduced by the enzyme 1,2-dehydroreticuline reductase obtaining (R)-reticuline in high ee and yield (>99% ee, up to quant. conversion, 92% isol. yield). In the final step, membrane-bound salutaridine synthase was used to perform the selective ortho-para phenol coupling to give (+)-salutaridine. The synthetic route shows the potential of combining early-stage advanced organic chemistry to minimize protecting group techniques with late-stage multi-step biocatalysis to provide an unprecedented access to the medicinally important compound class of promorphinans.

Reviewing the Source, Physiological Characteristics, and Aroma Production Mechanisms of Aroma-Producing Yeasts

Flavor is an essential element of food quality. Flavor can be improved by adding flavoring substances or via microbial fermentation to impart aroma. Aroma-producing yeasts are a group of microorganisms that can produce aroma compounds, providing a strong aroma to foods and thus playing a great role in the modern fermentation industry. The physiological characteristics of aroma-producing yeast, including alcohol tolerance, acid tolerance, and salt tolerance, are introduced in this article, beginning with their origins and biological properties. The main mechanism of aroma-producing yeast is then analyzed based on its physiological roles in the fermentation process. Functional enzymes such as proteases, lipases, and glycosidase are released by yeast during the fermentation process. Sugars, fats, and proteins in the environment can be degraded by these enzymes via pathways such as glycolysis, methoxylation, the Ehrlich pathway, and esterification, resulting in the production of various aromatic esters (such as ethyl acetate and ethyl caproate), alcohols (such as phenethyl alcohol), and terpenes (such as monoterpenes, sesquiterpenes, and squalene). Furthermore, yeast cells can serve as cell synthesis factories, wherein specific synthesis pathways can be introduced into cells using synthetic biology techniques to achieve high-throughput production. In addition, the applications of aroma yeast in the food, pharmaceutical, and cosmetic industries are summarized, and the future development trends of aroma yeasts are discussed to provide a theoretical basis for their application in the food fermentation industry.

Biosynthesis and biotechnological production of the anti-obesity agent celastrol

Obesity is a major health risk still lacking effective pharmacological treatment. A potent anti-obesity agent, celastrol, has been identified in the roots of Tripterygium wilfordii. However, an efficient synthetic method is required to better explore its biological utility. Here we elucidate the 11 missing steps for the celastrol biosynthetic route to enable its de novo biosynthesis in yeast. First, we reveal the cytochrome P450 enzymes that catalyse the four oxidation steps that produce the key intermediate celastrogenic acid. Subsequently, we show that non-enzymatic decarboxylation-triggered activation of celastrogenic acid leads to a cascade of tandem catechol oxidation-driven double-bond extension events that generate the characteristic quinone methide moiety of celastrol. Using this acquired knowledge, we have developed a method for producing celastrol starting from table sugar. This work highlights the effectiveness of combining plant biochemistry with metabolic engineering and chemistry for the scalable synthesis of complex specialized metabolites.

A robust genetic toolbox for fine-tuning gene expression in the CO2-Fixing methanogenic archaeon Methanococcus maripaludis

Libraries of well-characterized genetic elements for fine-tuning gene expression are essential for biological and biotechnological research and applications. The fast-growing and genetically tractable methanogen, Methanococcus maripaludis, is a promising host organism for biotechnological conversion of carbon dioxide and renewable hydrogen into fuels and value-added products, as well as fundamental biological studies of archaea. However, the lack of molecular tools for gene expression has hindered its application as a workhorse to fine-tune gene and metabolic pathway expressions. In this study, we developed a genetic toolbox, including libraries of promoters, ribosome binding sites (RBS), and neutral sites for chromosomal integration, to facilitate precise gene expression in M. maripaludis. We generated a promoter library consisting of 81 constitutive promoters with expression strengths spanning a ∼104-fold dynamic range. Importantly, we identified a base composition rule for strong archaeal promoters and successfully remodeled weak promoters, enhancing their activities by up to 120-fold. We also established an RBS library containing 42 diverse RBS sequences with translation strengths covering a ∼100-fold dynamic range. Additionally, we identified eight neutral sites and developed a one-step, Cas9-based marker-less knock-in approach for chromosomal integration. We successfully applied the characterized promoter and RBS elements to significantly improve recombinant protein expression by 41-fold and modulate essential gene expression to generate corresponding physiological changes in M. maripaludis. Therefore, this work establishes a solid foundation for utilizing this autotrophic methanogen as an ideal workhorse for archaeal biology and biotechnological studies and applications.

Advances in Metabolic Engineering of Plant Monoterpene Indole Alkaloids

Monoterpene indole alkaloids (MIAs) encompass a diverse family of over 3000 plant natural products with a wide range of medical applications. Further utilizations of these compounds, however, are hampered due to low levels of abundance in their natural sources, causing difficult isolation and complex multi-steps in uneconomical chemical syntheses. Metabolic engineering of MIA biosynthesis in heterologous hosts is attractive, particularly for increasing the yield of natural products of interest and expanding their chemical diversity. Here, we review recent advances and strategies which have been adopted to engineer microbial and plant systems for the purpose of generating MIAs and discuss the current issues and future developments of manufacturing MIAs by synthetic biology approaches.

A tripartite microbial co-culture system for de novo biosynthesis of diverse plant phenylpropanoids

Plant-derived phenylpropanoids, in particular phenylpropenes, have diverse industrial applications ranging from flavors and fragrances to polymers and pharmaceuticals. Heterologous biosynthesis of these products has the potential to address low, seasonally dependent yields hindering ease of widespread manufacturing. However, previous efforts have been hindered by the inherent pathway promiscuity and the microbial toxicity of key pathway intermediates. Here, in this study, we establish the propensity of a tripartite microbial co-culture to overcome these limitations and demonstrate to our knowledge the first reported de novo phenylpropene production from simple sugar starting materials. After initially designing the system to accumulate eugenol, the platform modularity and downstream enzyme promiscuity was leveraged to quickly create avenues for hydroxychavicol and chavicol production. The consortia was found to be compatible with Engineered Living Material production platforms that allow for reusable, cold-chain-independent distributed manufacturing. This work lays the foundation for further deployment of modular microbial approaches to produce plant secondary metabolites.

Engineered Escherichia coli platforms for tyrosine-derivative production from phenylalanine using phenylalanine hydroxylase and tetrahydrobiopterin-regeneration system

BACKGROUND

Aromatic compounds derived from tyrosine are important and diverse chemicals that have industrial and commercial applications. Although these aromatic compounds can be obtained by extraction from natural producers, their growth is slow, and their content is low. To overcome these problems, many of them have been chemically synthesized from petroleum-based feedstocks. However, because of the environmental burden and depleting availability of feedstock, microbial cell factories are attracting much attention as sustainable and environmentally friendly processes.

RESULTS

To facilitate development of microbial cell factories for producing tyrosine derivatives, we developed simple and convenient tyrosine-producing Escherichia coli platforms with a bacterial phenylalanine hydroxylase, which converted phenylalanine to tyrosine with tetrahydromonapterin as a cofactor, using a synthetic biology approach. By introducing a tetrahydrobiopterin-regeneration system, the tyrosine titer of the plasmid-based engineered strain was 4.63 g/L in a medium supplemented with 5.00 g/L phenylalanine with a test tube. The strains were successfully used to produce industrially attractive compounds, such as tyrosol with a yield of 1.58 g/L by installing a tyrosol-producing module consisting of genes encoding tyrosine decarboxylase and tyramine oxidase on a plasmid. Gene integration into E. coli chromosomes has an advantage over the use of plasmids because it increases genetic stability without antibiotic feeding to the culture media and enables more flexible pathway engineering by accepting more plasmids with artificial pathway genes. Therefore, we constructed a plasmid-free tyrosine-producing platform by integrating five modules, comprising genes encoding the phenylalanine hydroxylase and tetrahydrobiopterin-regeneration system, into the chromosome. The platform strain could produce 1.04 g/L of 3,4-dihydroxyphenylalanine, a drug medicine, by installing a gene encoding tyrosine hydroxylase and the tetrahydrobiopterin-regeneration system on a plasmid. Moreover, by installing the tyrosol-producing module, tyrosol was produced with a yield of 1.28 g/L.

CONCLUSIONS

We developed novel E. coli platforms for producing tyrosine from phenylalanine at multi-gram-per-liter levels in test-tube cultivation. The platforms allowed development and evaluation of microbial cell factories installing various designed tyrosine-derivative biosynthetic pathways at multi-grams-per-liter levels in test tubes.

Elucidation of a Dearomatization Route in the Biosynthesis of Oxysporidinone Involving a TenA-like Cytochrome P450 Enzyme

Oxidative dearomatization of phenols is an important transformation for synthesis of complex molecules. Oxysporidinone and related 2-pyridones feature a hydroxy-substituted cyclohexanone ring, which has been proposed to form by phenol dearomatization, although the details of the biochemical process are still unknown. In this study, we identified the oxysporidinone biosynthetic gene cluster in Fusarium oxysporum by regulator activation and gene knockout studies. Through in vivo and in vitro studies, we confirmed that the phenol dearomatization process involves two enzymes. OsdM, a TenA-like cytochrome P450 with expected ring-expansion activity, converts the phenol ring and the 4-hydroxy-2-pyridone core into an unexpected fused [6-5-6] ring system. OsdN, on the other hand, catalyzes two successive ene reduction reactions, followed by hydroxylation by OsdM. This new route enriches current knowledge on enzymatic phenol dearomatization and the mechanism of TenA-like P450s.

CREEPY: CRISPR-mediated editing of synthetic episomes in yeast

Use of synthetic genomics to design and build 'big' DNA has revolutionized our ability to answer fundamental biological questions by employing a bottom-up approach. Saccharomyces cerevisiae, or budding yeast, has become the major platform to assemble large synthetic constructs thanks to its powerful homologous recombination machinery and the availability of well-established molecular biology techniques. However, introducing designer variations to episomal assemblies with high efficiency and fidelity remains challenging. Here we describe CRISPR Engineering of EPisomes in Yeast, or CREEPY, a method for rapid engineering of large synthetic episomal DNA constructs. We demonstrate that CRISPR editing of circular episomes presents unique challenges compared to modifying native yeast chromosomes. We optimize CREEPY for efficient and precise multiplex editing of >100 kb yeast episomes, providing an expanded toolkit for synthetic genomics.

Multilayered regulation of secondary metabolism in medicinal plants

Medicinal plants represent a huge reservoir of secondary metabolites (SMs), substances with significant pharmaceutical and industrial potential. However, obtaining secondary metabolites remains a challenge due to their low-yield accumulation in medicinal plants; moreover, these secondary metabolites are produced through tightly coordinated pathways involving many spatiotemporally and environmentally regulated steps. The first regulatory layer involves a complex network of transcription factors; a second, more recently discovered layer of complexity in the regulation of SMs is epigenetic modification, such as DNA methylation, histone modification and small RNA-based mechanisms, which can jointly or separately influence secondary metabolites by regulating gene expression. Here, we summarize the findings in the fields of genetic and epigenetic regulation with a special emphasis on SMs in medicinal plants, providing a new perspective on the multiple layers of regulation of gene expression.

Enhanced locomotor behaviour is mediated by activation of tyrosine hydroxylase in the silkworm brain

Animal behaviour regulation is a complex process involving many factors, and the nervous system is an essential factor in this process. In many species, pathogens can alter host behaviour by affecting the host's nervous system. An interesting example is that the silkworm shows enhanced locomotor behaviour after being infected with the nucleopolyhedrosis virus. In this study, we analysed the transcriptome of the silkworm brain at different time points after infection and found that various genes related to behaviour regulation changed after infection. In-depth analysis showed that the tyrosine hydroxylase gene might be a key candidate gene, and the content of dopamine, its downstream metabolite, increased significantly in the brain of silkworms infected with the virus. After the injection of tyrosine hydroxylase inhibitor into the infected silkworm, the dopamine content in the silkworm brain decreased and the locomotor behaviour caused by the virus was blocked successfully. These results confirm that tyrosine hydroxylase is involved in regulating enhanced locomotor behaviour after virus infection in silkworms. Furthermore, the tyrosine hydroxylase gene was specifically overexpressed in the brain of the silkworm, and the transgenic silkworm was enhanced in locomotor behaviour and foraging behaviour. These results suggest that the tyrosine hydroxylase gene plays a vital role in regulating insect behaviour.

Dehydrogenase MnGutB1 catalyzes 1-deoxynojirimycin biosynthesis in mulberry

As the prevalence of diabetes continues to increase, the number of individuals living with diabetes complications will reach an unprecedented magnitude. Continuous use of some synthetic agents to reduce blood glucose levels causes severe side effects, and thus, the demand for nontoxic, affordable drugs persists. Naturally occurring compounds, such as iminosugars derived from the mulberry (Morus spp.), have been shown to reduce blood glucose levels. In mulberry, 1-deoxynojirimycin (DNJ) is the predominant iminosugar. However, the mechanism underlying DNJ biosynthesis is not completely understood. Here, we showed that DNJ in mulberry is derived from sugar and catalyzed through 2-amino-2-deoxy-D-mannitol (ADM) dehydrogenase MnGutB1. Combining both targeted and nontargeted metabolite profiling methods, DNJ and its precursors ADM and nojirimycin (NJ) were quantified in mulberry samples from different tissues. Purified His-tagged MnGutB1 oxidized the hexose derivative ADM to form the 6-oxo compound DNJ. The mutant MnGutB1 D283N lost this remarkable capability. Furthermore, in contrast to virus-induced gene silencing of MnGutB1 in mulberry leaves that disrupted the biosynthesis of DNJ, overexpression of MnGutB1 in hairy roots and light-induced upregulation of MnGutB1 enhanced DNJ accumulation. Our results demonstrated that hexose derivative ADM, rather than lysine derivatives, is the precursor in DNJ biosynthesis, and it is catalyzed by MnGutB1 to form the 6-oxo compound. These results represent a breakthrough in producing DNJ and its analogs for medical use by metabolic engineering or synthetic biology.

Rational Engineering of (S)-Norcoclaurine Synthase for Efficient Benzylisoquinoline Alkaloids Biosynthesis

(S)-Norcoclaurine is synthesized in vivo through a metabolic pathway that ends with (S)-norcoclaurine synthase (NCS). The former constitutes the scaffold for the biosynthesis of all benzylisoquinoline alkaloids (BIAs), including many drugs such as the opiates morphine and codeine and the semi-synthetic opioids oxycodone, hydrocodone, and hydromorphone. Unfortunately, the only source of complex BIAs is the opium poppy, leaving the drug supply dependent on poppy crops. Therefore, the bioproduction of (S)-norcoclaurine in heterologous hosts, such as bacteria or yeast, is an intense area of research nowadays. The efficiency of (S)-norcoclaurine biosynthesis is strongly dependent on the catalytic efficiency of NCS. Therefore, we identified vital NCS rate-enhancing mutations through the rational transition-state macrodipole stabilization method at the Quantum Mechanics/Molecular Mechanics (QM/MM) level. The results are a step forward for obtaining NCS variants able to biosynthesize (S)-norcoclaurine on a large scale.

Evaluation of reference genes for qRT-PCR studies in the colchicine producing Gloriosa superba L

The flame lily, Gloriosa superba L., is one of the two primary sources of the anti-inflammatory drug, colchicine. Previous studies have shown that a higher level of colchicine production occurs in the rhizomes than in leaves and roots. Earlier precursor feeding and transcriptome analysis of G. superba have provided a putative pathway and candidate genes involved in colchicine biosynthesis. Comparative analysis of expression levels of candidate pathway genes in different tissues of G. superba using quantitative real-time reverse transcription-polymerase chain reaction (qRT-PCR) can reveal highly expressed genes in the rhizome compared to other tissues which could suggest roles of the gene products in colchicine biosynthesis. Normalization is an important step in effectively analyzing differential gene expression by qRT-PCR with broader applications. The current study selected candidate reference genes from the transcriptome datasets and analyzed them to determine the most stable genes for normalization of colchicine biosynthesis-related genes. Using RefFinder, one stable reference gene, UBC22, was selected to normalize gene expression levels of candidate methyltransferase (MT) genes in the leaves, roots, and rhizomes of G. superba. With UBC22 as reference gene, the methyltransferases, GsOMT1, GsOMT3, and GsOMT4 showed significantly higher expression levels in the rhizome of G. superba, while MT31794 was more highly expressed in the roots. In conclusion, the current results showed a viable reference gene expression analysis system that could help elucidate colchicine biosynthesis and its exploitation for increased production of the drug in G. superba.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11816-023-00840-x.

Applications of synthetic biology in medical and pharmaceutical fields

Synthetic biology aims to design or assemble existing bioparts or bio-components for useful bioproperties. During the past decades, progresses have been made to build delicate biocircuits, standardized biological building blocks and to develop various genomic/metabolic engineering tools and approaches. Medical and pharmaceutical demands have also pushed the development of synthetic biology, including integration of heterologous pathways into designer cells to efficiently produce medical agents, enhanced yields of natural products in cell growth media to equal or higher than that of the extracts from plants or fungi, constructions of novel genetic circuits for tumor targeting, controllable releases of therapeutic agents in response to specific biomarkers to fight diseases such as diabetes and cancers. Besides, new strategies are developed to treat complex immune diseases, infectious diseases and metabolic disorders that are hard to cure via traditional approaches. In general, synthetic biology brings new capabilities to medical and pharmaceutical researches. This review summarizes the timeline of synthetic biology developments, the past and present of synthetic biology for microbial productions of pharmaceutics, engineered cells equipped with synthetic DNA circuits for diagnosis and therapies, live and auto-assemblied biomaterials for medical treatments, cell-free synthetic biology in medical and pharmaceutical fields, and DNA engineering approaches with potentials for biomedical applications.

Yeast: A platform for the production of L -tyrosine derivatives

L -Tyrosine derivatives are widely applied in the pharmaceutical, food, and chemical industries. Their production is mainly confined to chemical synthesis and plant extract. Microorganisms, as cell factories, exhibit promising advantages for valuable chemical production to fulfill the increase in the demand of global markets. Yeast has been used to produce natural products owing to its robustness and genetic maneuverability. Focusing on the progress of yeast cell factories for the production of L -tyrosine derivatives, we summarized the emerging metabolic engineering approaches in building L -tyrosoine-overproducing yeast and constructing cell factories of three typical chemicals and their derivatives: tyrosol, p-coumaric acid, and L -DOPA. Finally, the challenges and opportunities of L -tyrosine derivatives production in yeast cell factories were also discussed.

Advances in the optimization of central carbon metabolism in metabolic engineering

Central carbon metabolism (CCM), including glycolysis, tricarboxylic acid cycle and the pentose phosphate pathway, is the most fundamental metabolic process in the activities of living organisms that maintains normal cellular growth. CCM has been widely used in microbial metabolic engineering in recent years due to its unique regulatory role in cellular metabolism. Using yeast and Escherichia coli as the representative organisms, we summarized the metabolic engineering strategies on the optimization of CCM in eukaryotic and prokaryotic microbial chassis, such as the introduction of heterologous CCM metabolic pathways and the optimization of key enzymes or regulatory factors, to lay the groundwork for the future use of CCM optimization in metabolic engineering. Furthermore, the bottlenecks in the application of CCM optimization in metabolic engineering and future application prospects are summarized.

Standard Intein Gene Expression Ramps (SIGER) for Protein-Independent Expression Control

Coordination of multigene expression is one of the key challenges of metabolic engineering for the development of cell factories. Constraints on translation initiation and early ribosome kinetics of mRNA are imposed by features of the 5'UTR in combination with the start of the gene, referred to as the "gene ramp", such as rare codons and mRNA secondary structures. These features strongly influence the translation yield and protein quality by regulating the ribosome distribution on mRNA strands. The utilization of genetic expression sequences, such as promoters and 5'UTRs in combination with different target genes, leads to a wide variety of gene ramp compositions with irregular translation rates, leading to unpredictable levels of protein yield and quality. Here, we present the Standard Intein Gene Expression Ramp (SIGER) system for controlling protein expression. The SIGER system makes use of inteins to decouple the translation initiation features from the gene of a target protein. We generated sequence-specific gene expression sequences for two inteins (DnaB and DnaX) that display defined levels of protein expression. Additionally, we used inteins that possess the ability to release the C-terminal fusion protein in vivo to avoid the impairment of protein functionality by the fused intein. Overall, our results show that SIGER systems are unique tools to mitigate the undesirable effects of gene ramp variation and to control the relative ratios of enzymes involved in molecular pathways. As a proof of concept of the potential of the system, we also used a SIGER system to express two difficult-to-produce proteins, GumM and CBM73.

Synthetic biology-inspired cell engineering in diagnosis, treatment, and drug development

The fast-developing synthetic biology (SB) has provided many genetic tools to reprogram and engineer cells for improved performance, novel functions, and diverse applications. Such cell engineering resources can play a critical role in the research and development of novel therapeutics. However, there are certain limitations and challenges in applying genetically engineered cells in clinical practice. This literature review updates the recent advances in biomedical applications, including diagnosis, treatment, and drug development, of SB-inspired cell engineering. It describes technologies and relevant examples in a clinical and experimental setup that may significantly impact the biomedicine field. At last, this review concludes the results with future directions to optimize the performances of synthetic gene circuits to regulate the therapeutic activities of cell-based tools in specific diseases.

Pathway elucidation and microbial synthesis of proaporphine and bis-benzylisoquinoline alkaloids from sacred lotus (Nelumbo nucifera)

Sacred lotus (Nelumbo nucifera) has been utilized as a food, medicine, and spiritual symbol for nearly 3000 years. The medicinal properties of lotus are largely attributed to its unique profile of benzylisoquinoline alkaloids (BIAs), which includes potential anti-cancer, anti-malarial and anti-arrhythmic compounds. BIA biosynthesis in sacred lotus differs markedly from that of opium poppy and other members of the Ranunculales, most notably in an abundance of BIAs possessing the (R)-stereochemical configuration and the absence of reticuline, a major branchpoint intermediate in most BIA producers. Owing to these unique metabolic features and the pharmacological potential of lotus, we set out to elucidate the BIA biosynthesis network in N. nucifera. Here we show that lotus CYP80G (NnCYP80G) and a superior ortholog from Peruvian nutmeg (Laurelia sempervirens; LsCYP80G) stereospecifically convert (R)-N-methylcoclaurine to the proaporphine alkaloid glaziovine, which is subsequently methylated to pronuciferine, the presumed precursor to nuciferine. While sacred lotus employs a dedicated (R)-route to aporphine alkaloids from (R)-norcoclaurine, we implemented an artificial stereochemical inversion approach to flip the stereochemistry of the core BIA pathway. Exploiting the unique substrate specificity of dehydroreticuline synthase from common poppy (Papaver rhoeas) and pairing it with dehydroreticuline reductase enabled de novo synthesis of (R)-N-methylcoclaurine from (S)-norcoclaurine and its subsequent conversion to pronuciferine. We leveraged our stereochemical inversion approach to also elucidate the role of NnCYP80A in sacred lotus metabolism, which we show catalyzes the stereospecific formation of the bis-BIA nelumboferine. Screening our collection of 66 plant O-methyltransferases enabled conversion of nelumboferine to liensinine, a potential anti-cancer bis-BIA from sacred lotus. Our work highlights the unique benzylisoquinoline metabolism of N. nucifera and enables the targeted overproduction of potential lotus pharmaceuticals using engineered microbial systems.

Redirecting tropane alkaloid metabolism reveals pyrrolidine alkaloid diversity in Atropa belladonna

Plant-specialized metabolism is complex, with frequent examples of highly branched biosynthetic pathways, and shared chemical intermediates. As such, many plant-specialized metabolic networks are poorly characterized. The N-methyl Δ¹ -pyrrolinium cation is a simple pyrrolidine alkaloid and precursor of pharmacologically important tropane alkaloids. Silencing of pyrrolidine ketide synthase (AbPyKS) in the roots of Atropa belladonna (Deadly Nightshade) reduces tropane alkaloid abundance and causes high N-methyl Δ¹ -pyrrolinium cation accumulation. The consequences of this metabolic shift on alkaloid metabolism are unknown. In this study, we utilized discovery metabolomics coupled with AbPyKS silencing to reveal major changes in the root alkaloid metabolome of A. belladonna. We discovered and annotated almost 40 pyrrolidine alkaloids that increase when AbPyKS activity is reduced. Suppression of phenyllactate biosynthesis, combined with metabolic engineering in planta, and chemical synthesis indicates several of these pyrrolidines share a core structure formed through the nonenzymatic Mannich-like decarboxylative condensation of the N-methyl Δ¹ -pyrrolinium cation with 2-O-malonylphenyllactate. Decoration of this core scaffold through hydroxylation and glycosylation leads to mono- and dipyrrolidine alkaloid diversity. This study reveals the previously unknown complexity of the A. belladonna root metabolome and creates a foundation for future investigation into the biosynthesis, function, and potential utility of these novel alkaloids.

Metabolic engineering for sustainability and health

Bio-based production of chemicals and materials has attracted much attention due to the urgent need to establish sustainability and enhance human health. Metabolic engineering (ME) allows purposeful modification of cellular metabolic, regulatory, and signaling networks to achieve enhanced production of desired chemicals and degradation of environmentally harmful chemicals. ME has significantly progressed over the past 30 years through further integration of the strategies of synthetic biology, systems biology, evolutionary engineering, and data science aided by artificial intelligence. Here we review the field of ME from its emergence to the current state-of-the-art, highlighting its contribution to sustainable production of chemicals, health, and the environment through representative examples. Future challenges of ME and perspectives are also discussed.

Rational search of genetic design space for a heterologous terpene metabolic pathway in Streptomyces

Modern tools in DNA synthesis and assembly give genetic engineers control over the nucleotide-level design of complex, multi-gene systems. Systematic approaches to explore genetic design space and optimize the performance of genetic constructs are lacking. Here we explore the application of a five-level Plackett-Burman fractional factorial design to improve the titer of a heterologous terpene biosynthetic pathway in Streptomyces. A library of 125 engineered gene clusters encoding the production of diterpenoid ent-atiserenoic acid (eAA) via the methylerythritol phosphate pathway was constructed and introduced into Streptomyces albidoflavus J1047 for heterologous expression. The eAA production titer varied within the library by over two orders of magnitude and host strains showed unexpected and reproducible colony morphology phenotypes. Analysis of Plackett-Burman design identified expression of dxs, the gene encoding the first and the flux-controlling enzyme, having the strongest impact on eAA titer, but with a counter-intuitive negative correlation between dxs expression and eAA production. Finally, simulation modeling was performed to determine how several plausible sources of experimental error/noise and non-linearity impact the utility of Plackett-Burman analyses.

Labelling studies in the biosynthesis of polyketides and non-ribosomal peptides

Covering: 2015 to 2022In this review, we discuss the recent advances in the use of isotopically labelled compounds to investigate the biosynthesis of polyketides, non-ribosomally synthesised peptides, and their hybrids. Also, we highlight the use of isotopes in the elucidation of their structures and investigation of enzyme mechanisms. The biosynthetic pathways of selected examples are presented in detail to reveal the principles of the discussed labelling experiments. The presented examples demonstrate that the application of isotopically labelled compounds is still the state of the art and can provide valuable information for the biosynthesis of natural products.

Strengthening microbial cell factories for efficient production of bioactive molecules

High demand of bioactive molecules (food additives, antibiotics, plant growth enhancers, cosmetics, pigments and other commercial products) is the prime need for the betterment of human life where the applicability of the synthetic chemical product is on the saturation due to associated toxicity and ornamentations. It has been noticed that the discovery and productivity of such molecules in natural scenarios are limited due to low cellular yields as well as less optimized conventional methods. In this respect, microbial cell factories timely fulfilling the requirement of synthesizing bioactive molecules by improving production yield and screening more promising structural homologues of the native molecule. Where the robustness of the microbial host can be potentially achieved by taking advantage of cell engineering approaches such as tuning functional and adjustable factors, metabolic balancing, adapting cellular transcription machinery, applying high throughput OMICs tools, stability of genotype/phenotype, organelle optimizations, genome editing (CRISPER/Cas mediated system) and also by developing accurate model systems via machine-learning tools. In this article, we provide an overview from traditional to recent trends and the application of newly developed technologies, for strengthening the systemic approaches and providing future directions for enhancing the robustness of microbial cell factories to speed up the production of biomolecules for commercial purposes.

Strong Feedback Inhibition of Key Enzymes in the Morphine Biosynthetic Pathway from Opium Poppy Detectable in Engineered Yeast

Systematic screening of morphine pathway intermediates in engineered yeast revealed key biosynthetic enzymes displaying potent feedback inhibition: 3'-hydroxy-N-methylcoclaurine 4'-methyltransferase (4'OMT), which yields (S)-reticuline, and the coupled salutaridinol-7-O-acetyltransferase (SalAT) and thebaine synthase (THS2) enzyme system that produces thebaine. The addition of deuterated reticuline-d1 to a yeast strain able to convert (S)-norcoclaurine to (S)-reticuline showed reduced product accumulation in response to the feeding of all four successive pathway intermediates. Similarly, the addition of deuterated thebaine-d3 to a yeast strain able to convert salutaridine to thebaine showed reduced product accumulation from exogenous salutaridine or salutaridinol. In vitro analysis showed that reticuline is a noncompetitive inhibitor of 4'OMT, whereas thebaine exerts mixed inhibition on SalAT/THS2. In a yeast strain capable of de novo morphine biosynthesis, the addition of reticuline and thebaine resulted in the accumulation of several pathway intermediates. In contrast, morphine had no effect, suggesting that circumventing the interaction of reticuline and thebaine with 4'OMT and SalAT/THS2, respectively, could substantially increase opiate alkaloid titers in engineered yeast.

Optimizing the strain engineering process for industrial-scale production of bio-based molecules

Biomanufacturing could contribute as much as ${\$}$30 trillion to the global economy by 2030. However, the success of the growing bioeconomy depends on our ability to manufacture high-performing strains in a time- and cost-effective manner. The Design-Build-Test-Learn (DBTL) framework has proven to be an effective strain engineering approach. Significant improvements have been made in genome engineering, genotyping, and phenotyping throughput over the last couple of decades that have greatly accelerated the DBTL cycles. However, to achieve a radical reduction in strain development time and cost, we need to look at the strain engineering process through a lens of optimizing the whole cycle, as opposed to simply increasing throughput at each stage. We propose an approach that integrates all 4 stages of the DBTL cycle and takes advantage of the advances in computational design, high-throughput genome engineering, and phenotyping methods, as well as machine learning tools for making predictions about strain scale-up performance. In this perspective, we discuss the challenges of industrial strain engineering, outline the best approaches to overcoming these challenges, and showcase examples of successful strain engineering projects for production of heterologous proteins, amino acids, and small molecules, as well as improving tolerance, fitness, and de-risking the scale-up of industrial strains.

Optogenetic control of beta-carotene bioproduction in yeast across multiple lab-scales

Optogenetics arises as a valuable tool to precisely control genetic circuits in microbial cell factories. Light control holds the promise of optimizing bioproduction methods and maximizing yields, but its implementation at different steps of the strain development process and at different culture scales remains challenging. In this study, we aim to control beta-carotene bioproduction using optogenetics in Saccharomyces cerevisiae and investigate how its performance translates across culture scales. We built four lab-scale illumination devices, each handling different culture volumes, and each having specific illumination characteristics and cultivating conditions. We evaluated optogenetic activation and beta-carotene production across devices and optimized them both independently. Then, we combined optogenetic induction and beta-carotene production to make a light-inducible beta-carotene producer strain. This was achieved by placing the transcription of the bifunctional lycopene cyclase/phytoene synthase CrtYB under the control of the pC120 optogenetic promoter regulated by the EL222-VP16 light-activated transcription factor, while other carotenogenic enzymes (CrtI, CrtE, tHMG) were expressed constitutively. We show that illumination, culture volume and shaking impact differently optogenetic activation and beta-carotene production across devices. This enabled us to determine the best culture conditions to maximize light-induced beta-carotene production in each of the devices. Our study exemplifies the stakes of scaling up optogenetics in devices of different lab scales and sheds light on the interplays and potential conflicts between optogenetic control and metabolic pathway efficiency. As a general principle, we propose that it is important to first optimize both components of the system independently, before combining them into optogenetic producing strains to avoid extensive troubleshooting. We anticipate that our results can help designing both strains and devices that could eventually lead to larger scale systems in an effort to bring optogenetics to the industrial scale.

Combinatorial biosynthesis: playing chess with the metabolism

Secondary metabolites are a group of natural products that produced by bacteria, fungi and plants. Many applications of these compounds from medicine to industry have been discovered. However, some changes in their structure and biosynthesis mechanism are necessary for their properties to be more suitable and also for their production to be profitable. The main and most useful method to achieve this goal is combinatorial biosynthesis. This technique uses the multi-unit essence of the secondary metabolites biosynthetic enzymes to make changes in their order, structure and also the organism that produces them.

Hierarchical dynamic regulation of Saccharomyces cerevisiae for enhanced lutein biosynthesis

Lutein, as a carotenoid with strong antioxidant capacity and an important component of macular pigment in the retina, has wide applications in pharmaceutical, food, feed, and cosmetics industries. Besides extraction from plant and algae, microbial fermentation using engineered cell factories to produce lutein has emerged as a promising route. However, intra-pathway competition between the lycopene cyclases and the conflict between cell growth and production are two major challenges. In our previous study, de novo synthesis of lutein had been achieved in Saccharomyces cerevisiae by dividing the pathway into two stages (δ-carotene formation and conversion) using temperature as the input signal to realize sequential cyclation of lycopene. However, lutein production was limited to microgram level, which is still too low to meet industrial demand. In this study, a dual-signal hierarchical dynamic regulation system was developed and applied to divide lutein biosynthesis into three stages in response to glucose concentration and culture temperature. By placing the genes involved in δ-carotene formation under the glucose-responsive ADH2 promoter and genes involved in the conversion of δ-carotene to lutein under temperature-responsive GAL promoters, the growth-production conflict and intra-pathway competition were simultaneously resolved. Meanwhile, the rate-limiting lycopene ε-cyclation and carotene hydroxylation reactions were improved by screening for lycopene ε-cyclase with higher activity and fine tuning of the P450 enzymes and their redox partners. Finally, a lutein titer of 19.92 mg/L (4.53 mg/g DCW) was obtained in shake-flask cultures using the engineered yeast strain YLutein-3S-6, which is the highest lutein titer ever reported in heterologous production systems.

Leveraging yeast to characterize plant biosynthetic gene clusters

Plant biosynthetic gene clusters (BGCs) contain multiple physically clustered non-homologous genes that encode enzymes catalyzing diverse reactions in one plant natural product biosynthetic pathway. A growing number of plant BGCs have emerged as an underlying resource for understanding plant specialized metabolism and evolution, but the characterization remains challenging. Recent studies have demonstrated that baker's yeast can serve as a versatile platform for the characterization of plant BGCs, from single-gene characterization to multiple genes and hitherto unknown putative BGC validation and elucidation. In this review, we will summarize the strategies and examples of the applications of yeast in plant BGC characterization and share our perspective on the development of a systematic pipeline to fully leverage yeast to advance the understanding of plant BGCs and plant natural product biomanufacturing.

Leveraging synthetic biology and metabolic engineering to overcome obstacles in plant pathway elucidation

Major hurdles in plant biosynthetic pathway elucidation and engineering include the need for rapid testing of enzyme candidates and the lack of complex substrates that are often not accumulated in the plant, amenable to synthesis, or commercially available. Linking metabolic engineering with gene discovery in both yeast and plant holds great promise to expedite the elucidation process and, at the same time, provide a platform for the sustainable production of plant metabolites. In this review, we highlight how synthetic biology and metabolic engineering alleviated longstanding obstacles in plant pathway elucidation. Recent advances in developing these chassis that showcase established and emerging strategies in accelerating biosynthetic gene discovery will also be discussed.

Production of ginsenoside compound K by microbial cell factory using synthetic biology-based strategy: a review

Ginsenoside compound K (CK) is a major intestinal bacterial metabolite of the protopanaxadiol-type ginsenoside family that can be absorbed in the systemic circulation. CK possesses diverse and important pharmacological properties. The low production and high cost of traditional manufacturing methods based on the extraction and biotransformation of total ginsenosides from ginseng have limited their medical application. However, considerable progress has been made in the area of de novo CK production via microbial cell factories using synthetic biology-based strategies. By introducing key enzymes responsible for CK biosynthesis into microbial cells, CK was produced via a series of in vivo enzymatic reactions that utilize the inherent precursors in microbial cells. After systematic optimization using various metabolic engineering strategies, the yield of CK increased significantly and exceeded the traditional plant extraction-biotransformation method, implying the commercial feasibility of this approach. This review summarizes recent novel advancements in the production of CK using microbial cell factories.

Deciphering chemical logic of fungal natural product biosynthesis through heterologous expression and genome mining

Covering: 2010 to 2022Heterologous expression of natural product biosynthetic gene clusters (BGCs) has become a widely used tool for genome mining of cryptic pathways, bottom-up investigation of biosynthetic enzymes, and engineered biosynthesis of new natural product variants. In the field of fungal natural products, heterologous expression of a complete pathway was first demonstrated in the biosynthesis of tenellin in Aspergillus oryzae in 2010. Since then, advances in genome sequencing, DNA synthesis, synthetic biology, etc. have led to mining, assignment, and characterization of many fungal BGCs using various heterologous hosts. In this review, we will highlight key examples in the last decade in integrating heterologous expression into genome mining and biosynthetic investigations. The review will cover the choice of heterologous hosts, prioritization of BGCs for structural novelty, and how shunt products from heterologous expression can reveal important insights into the chemical logic of biosynthesis. The review is not meant to be exhaustive but is rather a collection of examples from researchers in the field, including ours, that demonstrates the usefulness and pitfalls of heterologous biosynthesis in fungal natural product discovery.

A Synthesis of Alstonlarsine A via Alstolucines B and F Demonstrates the Chemical Feasibility of a Proposed Biogenesis

We offer a new biogenetic proposal for the origin of the complex alkaloid alstonlarsine A, through rearrangement of the Strychnos alkaloids alstolucines B and F. Further, we provide evidence of the chemical feasibility of this proposal in the facile conversion of synthetic alstolucines into alstonlarsine A through a short, efficient sequence of N-methylation, β-elimination, and a cascade 1,7-hydride shift/Mannich cyclization. We believe that this is the first biogenetic proposal involving the "tert-amino effect", a hydride-shift-based internal redox trigger of a Mannich cyclization. A further interesting feature of the cascade is that its stereochemical outcome most likely originates in conformational preferences during the hydride shift.

Shikimic acid biosynthesis in microorganisms: Current status and future direction

Shikimic acid (SA), a hydroaromatic natural product, is used as a chiral precursor for organic synthesis of oseltamivir (Tamiflu®, an antiviral drug). The process of microbial production of SA has recently undergone vigorous development. Particularly, the sustainable construction of recombinant Corynebacterium glutamicum (141.2 g/L) and Escherichia coli (87 g/L) laid a solid foundation for the microbial fermentation production of SA. However, its industrial application is restricted by limitations such as the lack of fermentation tests for industrial-scale and the requirement of growth-limiting factors, antibiotics, and inducers. Therefore, the development of SA biosensors and dynamic molecular switches, as well as genetic modification strategies and optimization of the fermentation process based on omics technology could improve the performance of SA-producing strains. In this review, recent advances in the development of SA-producing strains, including genetic modification strategies, metabolic pathway construction, and biosensor-assisted evolution, are discussed and critically reviewed. Finally, future challenges and perspectives for further reinforcing the development of robust SA-producing strains are predicted, providing theoretical guidance for the industrial production of SA.

Enhanced Co-culture System Using Escherichia coli and Pichia pastoris (Komagataella phaffii) for Improved Microbial Production of Valuable Plant Alkaloids

Advancements in synthetic biology have facilitated the microbial production of valuable plant metabolites. However, constructing complete biosynthetic pathways within a single host organism remains challenging. To solve this problem, modular co-culture systems involving host organisms with partial pathways have been developed. We focused on Escherichia coli, a general host for metabolite production, and Pichia pastoris (Komagataella phaffii), a novel synthetic biology host due to its high expression of biosynthetic enzymes. Previously, we reported the co-culture of E. coli cells, which produce reticuline (an important intermediate for various alkaloids) from glycerol, with P. pastoris cells, which produce the valuable alkaloid stylopine from reticuline. However, Pichia cells inhibited E. coli growth and reticuline production. Therefore, we aimed to improve this co-culture system. We investigated the pre-culture time before co-culture to enhance E. coli growth and reticuline production. Additionally, we examined the optimal concentration of Pichia cells inoculated for co-culture and methanol addition during co-culture for the continuous expression of biosynthetic enzymes in Pichia cells. We successfully established an improved co-culture system that exhibited an 80-fold increase in productivity compared to previous methods. This enhanced system holds great potential for the rapid and large-scale production of various valuable plant metabolites.

Computational Methods for the Design of Recombinase Logic Circuits with Adaptable Circuit Specifications

Synthetic biology aims at engineering new biological systems and functions that can be used to provide new technological solutions to worldwide challenges. Detection and processing of multiple signals are crucial for many synthetic biology applications. A variety of logic circuits operating in living cells have been implemented. One particular class of logic circuits uses site-specific recombinases mediating specific DNA inversion or excision. Recombinase logic offers many interesting features, including single-layer architectures, memory, low metabolic footprint, and portability in many species. Here, we present two automated design strategies for both Boolean and history-dependent recombinase-based logic circuits. One approach is based on the distribution of computation within multicellular consortia, and the other is a single-cell design. Both are complementary and adapted for non-expert users via a web design interface, called CALIN and RECOMBINATOR, for multicellular and single-cell design strategies, respectively. In this book chapter, we are guiding the reader step by step through recombinase logic circuit design, from selecting the design strategy fitting to their final system of interest to obtaining the final design using one of our design web interfaces.

Metabolic Engineering: Methodologies and Applications

Metabolic engineering aims to improve the production of economically valuable molecules through the genetic manipulation of microbial metabolism. While the discipline is a little over 30 years old, advancements in metabolic engineering have given way to industrial-level molecule production benefitting multiple industries such as chemical, agriculture, food, pharmaceutical, and energy industries. This review describes the design, build, test, and learn steps necessary for leading a successful metabolic engineering campaign. Moreover, we highlight major applications of metabolic engineering, including synthesizing chemicals and fuels, broadening substrate utilization, and improving host robustness with a focus on specific case studies. Finally, we conclude with a discussion on perspectives and future challenges related to metabolic engineering.

De Novo Biosynthesis of Vindoline and Catharanthine in Saccharomyces cerevisiae

Vinblastine has been used clinically as one of the most potent therapeutics for the treatment of several types of cancer. However, the traditional plant extraction method suffers from unreliable supply, low abundance, and extremely high cost. Here, we use synthetic biology approach to engineer Saccharomyces cerevisiae for de novo biosynthesis of vindoline and catharanthine, which can be coupled chemically or biologically to vinblastine. On the basis of a platform strain with sufficient supply of precursors and cofactors for biosynthesis, we reconstituted, debottlenecked, and optimized the biosynthetic pathways for the production of vindoline and catharanthine. The vindoline biosynthetic pathway represents one of the most complicated pathways ever reconstituted in microbial cell factories. Using shake flask fermentation, our engineered yeast strains were able to produce catharanthine and vindoline at a titer of 527.1 and 305.1 μg·liter-1, respectively, without accumulating detectable amount of pathway intermediates. This study establishes a representative example for the production of valuable plant natural products in yeast.