Silicon quantum dots for biological applications

Silicon quantum dots based fluorescent probes for detecting methyl parathion pesticide residues in potato, tap water and Yellow River

In this paper, a novel ratiometric fluorescent probe based on silicon quantum dots (SiQDs) has been developed for the sensitive detection of methyl parathion pesticide residues. The silicon quantum dots were prepared by a simple hydrothermal reaction process using 3-Aminopropyltriethoxysilane (APTES) as silicon resource and were characterized by the analysis of transmission electron microscopy, FTIR spectroscopy, and X-ray photoelectron spectroscopy. The silicon quantum dots displayed characteristic blue fluorescence emission at 440 nm. Tyrosinase can catalyze the oxidation of tyramine to form dopamine. Then, dopamine can interact with silicon quantum dots and effectively change the position of its fluorescence emission for redshifting to 540 nm. In the presence of organic phosphorus pesticides (OPPs), the activity of tyrosinase was inhibited, resulting in the inability to generate dopamine and the fluorescence emission at 440 nm remaining unchanged. As a model of organic phosphorus pesticides, methyl parathion (MP) was determined using this method, and the fluorescence intensity response values showed a good linear relationship with methyl parathion concentration in the range of 50-90 nM, with a detection limit of 0.149 nM. Due to its good performance of relative low detection limit, good selectivity and high reproducibility, this sensing system has been successfully applied to the detection of methyl parathion in environmental water samples and potato samples, which showed good prospects for application in the detection of organic phosphorus pesticide residues in more real samples.

Applicability of Quantum Dots in Breast Cancer Diagnostic and Therapeutic Modalities-A State-of-the-Art Review

The increasing incidence of breast cancers (BCs) in the world population and their complexity and high metastatic ability are serious concerns for healthcare systems. Despite the significant progress in medicine made in recent decades, the efficient treatment of invasive cancers still remains challenging. Chemotherapy, a fundamental systemic treatment method, is burdened with severe adverse effects, with efficacy limited by resistance development and risk of disease recurrence. Also, current diagnostic methods have certain drawbacks, attracting attention to the idea of developing novel, more sensitive detection and therapeutic modalities. It seems the solution for these issues can be provided by nanotechnology. Particularly, quantum dots (QDs) have been extensively evaluated as potential targeted drug delivery vehicles and, simultaneously, sensing and bioimaging probes. These fluorescent nanoparticles offer unlimited possibilities of surface modifications, allowing for the attachment of biomolecules, such as antibodies or proteins, and drug molecules, among others. In this work, we discuss the potential applicability of QDs in breast cancer diagnostics and treatment in light of the current knowledge. We begin with introducing the molecular and histopathological features of BCs, standard therapeutic regimens, and current diagnostic methods. Further, the features of QDs, along with their uptake, biodistribution patterns, and cytotoxicity, are described. Based on the reports published in recent years, we present the progress in research on possible QD use in improving BC diagnostics and treatment efficacy as chemotherapeutic delivery vehicles and photosensitizing agents, along with the stages of their development. We also address limitations and open questions regarding this topic.

Dual Luminescent Mn(II)-Doped Cu-In-Zn-S Quantum Dots as Temperature Sensors in Water

CuInS2 quantum dots have emerged in the last years as non-toxic alternative to traditional Pb and Cd based quantum dots, especially for biological applications. In this work, the hydrothermal synthesis of alloyed Cu-In-Zn-S quantum dots (CIZS) doped with manganese(II) is explored, with different metal ratios (Mn-CIZSy). The doped quantum dots show the sensitized emission of Mn2+ (approximately ms lifetime), together with the emission of the CIZS structure (approximately µs lifetime). The relative contribution of Mn2+ emission is highly dependent on the composition of the CIZS hosting structure (In:Cu ratio). In addition to that, it is shown that Mn2+ sensitization requires a threshold energy, which suggests the involvement of an intermediate state in the sensitization mechanism. The long-lived emission intensity decay of Mn2+ shows a stable and reversible temperature response in physiological conditions (25-45 °C, pH = 7.4). Mn-CIZSy quantum dots are thus interesting candidates as biological luminescent temperature probe thanks to their easy synthesis, high colloidal stability, insensitivity to dioxygen quenching and quantitative time-gated detection.

Biomass-derived carbon dots as fluorescent quantum probes to visualize and modulate inflammation

Quantum dots, which won the Nobel Prize in Chemistry, have recently gained significant attention in precision medicine due to their unique properties, such as size-tunable emission, high photostability, efficient light absorption, and vibrant luminescence. Consequently, there is a growing demand to identify new types of quantum dots from various sources and explore their potential applications as stimuli-responsive biosensors, biomolecular imaging probes, and targeted drug delivery agents. Biomass-waste-derived carbon quantum dots (CQDs) are an attractive alternative to conventional QDs, which often require expensive and toxic precursors, as they offer several merits in eco-friendly synthesis, preparation from renewable sources, and cost-effective production. In this study, we evaluated three CQDs derived from biomass waste for their potential application as non-toxic bioimaging agents in various cell lines, including human dermal fibroblasts, HeLa, cardiomyocytes, induced pluripotent stem cells, and an in-vivo medaka fish (Oryzias latipes) model. Confocal microscopic studies revealed that CQDs could assist in visualizing inflammatory processes in the cells, as they were taken up more by cells treated with tumor necrosis factor-α than untreated cells. In addition, our quantitative real-time PCR gene expression analysis has revealed that citric acid-based CQDs can potentially reduce inflammatory markers such as Interleukin-6. Our studies suggest that CQDs have potential as theragnostic agents, which can simultaneously identify and modulate inflammatory markers and may lead to targeted therapy for immune system-associated diseases.

Nano-Micron Combined Hydrogel Microspheres: Novel Answer for Minimal Invasive Biomedical Applications

Hydrogels, key in biomedical research for their hydrophilicity and versatility, have evolved with hydrogel microspheres (HMs) of micron-scale dimensions, enhancing their role in minimally invasive therapeutic delivery, tissue repair, and regeneration. The recent emergence of nanomaterials has ushered in a revolutionary transformation in the biomedical field, which demonstrates tremendous potential in targeted therapies, biological imaging, and disease diagnostics. Consequently, the integration of advanced nanotechnology promises to trigger a new revolution in the realm of hydrogels. HMs loaded with nanomaterials combine the advantages of both hydrogels and nanomaterials, which enables multifaceted functionalities such as efficient drug delivery, sustained release, targeted therapy, biological lubrication, biochemical detection, medical imaging, biosensing monitoring, and micro-robotics. Here, this review comprehensively expounds upon commonly used nanomaterials and their classifications. Then, it provides comprehensive insights into the raw materials and preparation methods of HMs. Besides, the common strategies employed to achieve nano-micron combinations are summarized, and the latest applications of these advanced nano-micron combined HMs in the biomedical field are elucidated. Finally, valuable insights into the future design and development of nano-micron combined HMs are provided.

Surface charge-dependent cytokine production using near-infrared emitting silicon quantum dots

Toll-like receptor 9 (TLR-9) is a protein that helps our immune system identify specific DNA types. Upon detection, CpG oligodeoxynucleotides signal the immune system to generate cytokines, essential proteins that contribute to the body's defence against infectious diseases. Native phosphodiester type B CpG ODNs induce only Interleukin-6 with no effect on interferon-α. We prepared silicon quantum dots containing different surface charges, such as positive, negative, and neutral, using amine, acrylate-modified Plouronic F-127, and Plouronic F-127. Then, class B CpG ODNs are loaded on the surface of the prepared SiQDs. The uptake of ODNs varies based on the surface charge; positively charged SiQDs demonstrate higher adsorption compared to SiQDs with negative and neutral surface charges. The level of cytokine production in peripheral blood mononuclear cells was found to be associated with the surface charge of SiQDs prior to the binding of the CpG ODNs. Significantly higher levels of IL-6 and IFN-α induction were observed compared to neutral and negatively charged SiQDs loaded with CpG ODNs. This observation strongly supports the notion that the surface charge of SiQDs effectively regulates cytokine induction.

A fluorescent method for bisphenol A detection based on enzymatic oxidation-mediated emission quenching of silicon nanoparticles

As a common raw material of industrial products, bisphenol A (BPA) is widely used in the production of food contact materials, and there is a high risk of exposure in food. However, BPA is a well-known endocrine disruptor and poses a serious threat to human health. Herein, a fluorescent sensing platform of BPA based on enzymatic oxidation-mediated fluorescence quenching of silicon nanoparticles (SiNPs) is established and used to the detection of BPA in food species. The SiNPs are prepared with a facile one-step synthesis and emit bright green fluorescence. BPA can be oxidized by horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) to form a product which can quench the fluorescence of SiNPs through electron transfer. There is a good linear relationship between the fluorescence intensity and BPA concentration in the range of 1-100 μM. Therefore, a fluorometry of BPA is established with a low limit of detection (LOD) of 0.69 μM. This method has been applied to the determination of BPA in mineral drinking water, orange juice, and milk with satisfactory results. The fluorescent sensor of BPA based on SiNPs has favorable application foreground in the field of food safety analysis.

Post-functionalization of sulfur quantum dots and their aggregation-dependent antibacterial activity

Sulfur quantum dots (SQDs) have emerged as an intriguing class of luminescent nanomaterial due to their exceptional physiochemical and optoelectronic properties. However, their biomedical application is still in its infancy due to the limited scope of their surface functionalization. Herein, we explored the surface functionalization of SQDs through different thiol ligands with tuneable functionality and tested their antibacterial efficacy. Notably, very high antibacterial activity of functionalized SQDs (10-25 ng ml-1) was noted, which is 105 times higher compared to that of nonfunctionalized SQDs. Moreover, a rare phenomenon of the reverse trend of antibacterial activity through surface modification was observed, with increasing surface hydrophobicity of various nanomaterials as the antibacterial activity increased. However, we also noted that as the surface hydrophobicity increased, the SQDs tended to exhibit a propensity for aggregation, which consequently decreased their antibacterial efficacy. This identical pattern was also evident in in vivo assessments. Overall, this study illuminates the importance of surface modifications of SQDs and the role of surface hydrophobicity in the development of antibacterial agents.

Microporous Hydroxyapatite-Based Ceramics Alter the Physiology of Endothelial Cells through Physical and Chemical Cues

Incorporation of silicate ions in calcium phosphate ceramics (CPC) and modification of their multiscale architecture are two strategies for improving the vascularization of scaffolds for bone regenerative medicine. The response of endothelial cells, actors for vascularization, to the chemical and physical cues of biomaterial surfaces is little documented, although essential. We aimed to characterize in vitro the response of an endothelial cell line, C166, cultivated on the surface CPCs varying either in terms of their chemistry (pure versus silicon-doped HA) or their microstructure (dense versus microporous). Adhesion, metabolic activity, and proliferation were significantly altered on microporous ceramics, but the secretion of the pro-angiogenic VEGF-A increased from 262 to 386 pg/mL on porous compared to dense silicon-doped HA ceramics after 168 h. A tubulogenesis assay was set up directly on the ceramics. Two configurations were designed for discriminating the influence of the chemistry from that of the surface physical properties. The formation of tubule-like structures was qualitatively more frequent on dense ceramics. Microporous ceramics induced calcium depletion in the culture medium (from 2 down to 0.5 mmol/L), which is deleterious for C166. Importantly, this effect might be associated with the in vitro static cell culture. No influence of silicon doping of HA on C166 behavior was detected.

Theranostics applications of quantum dots in regenerative medicine, cancer medicine, and infectious diseases

Quantum dots (QDs) have attracted attention for their application and commercialization in all industrial fields, including communications, displays, and solar cells, due to their excellent optical properties based on the quantum size effect. In recent years, the development of QDs that do not contain cadmium which is toxic to cells and living organisms, has progressed, and they have attracted considerable attention in the bio-imaging field for targeting molecules and cells. Furthermore, recently, the need for diagnostics and treatment at the single molecule and single cell level in the medical field has been increasing, and the application of QDs in the medical field is also accelerating. Therefore, this paper outlines the frontiers of diagnostic and therapeutic applications (theranostics) of QDs, especially in advanced medical fields such as regenerative medicine, oncology, and infectious diseases.

Silicon nanoparticles as a fluorometric probe for sensitive detection of cyanide ion and its application in C. elegans bio-imaging

In recent years, silicon nanoparticles (Si NPs) have been explored as a promising alternative to traditional organic fluorophores in optical sensing and bioimaging applications owing to their exceptional optical properties and negligible toxicity. In this study, water-dispersible Si NPs were prepared from a 3-aminopropyl trimethoxysilane precursor using a facile one-pot process. The as-prepared Si NPs exhibited excitation-wavelength-dependent fluorescence properties and bright green fluorescence at 530 nm upon excitation at 420 nm. The fluorescence properties of Si NPs remained unperturbed under various physiological conditions, such as varying pH, ionic strength, and incubation time. A sensitive fluorometric turn-off sensor for cyanide ion (CN^-) detection was devised based on the unique fluorescence properties of Si NPs. The Si NPs-based detection assay showed a good linear response toward CN^- ranging between 0 and 33 μM, with a limit of detection as low as 0.90 nM. Caenorhabditis elegans is used as a model organism to evaluate the in vivo toxicity and molecular imaging capability of Si NPs.

Luminescent Quantum Dots: Synthesis, Optical Properties, Bioimaging and Toxicity

Luminescent nanomaterials such as semiconductor nanocrystals (NCs) and quantum dots (QDs) attract much attention to optical detectors, LEDs, photovoltaics, displays, biosensing, and bioimaging. These materials include metal chalcogenide QDs and metal halide perovskite NCs. Since the introduction of cadmium chalcogenide QDs to biolabeling and bioimaging, various metal nanoparticles (NPs), atomically precise metal nanoclusters, carbon QDs, graphene QDs, silicon QDs, and other chalcogenide QDs have been infiltrating the nano-bio interface as imaging and therapeutic agents. Nanobioconjugates prepared from luminescent QDs form a new class of imaging probes for cellular and in vivo imaging with single-molecule, super-resolution, and 3D resolutions. Surface modified and bioconjugated core-only and core-shell QDs of metal chalcogenides (MX; M = Cd/Pb/Hg/Ag, and X = S/Se/Te,), binary metal chalcogenides (MInX₂; M = Cu/Ag, and X = S/Se/Te), indium compounds (InAs and InP), metal NPs (Ag, Au, and Pt), pure or mixed precision nanoclusters (Ag, Au, Pt), carbon nanomaterials (graphene QDs, graphene nanosheets, carbon NPs, and nanodiamond), silica NPs, silicon QDs, etc. have become prevalent in biosensing, bioimaging, and phototherapy. While heavy metal-based QDs are limited to in vitro bioanalysis or clinical testing due to their potential metal ion-induced toxicity, carbon (nanodiamond and graphene) and silicon QDs, gold and silica nanoparticles, and metal nanoclusters continue their in vivo voyage towards clinical imaging and therapeutic applications. This review summarizes the synthesis, chemical modifications, optical properties, and bioimaging applications of semiconductor QDs with particular references to metal chalcogenide QDs and bimetallic chalcogenide QDs. Also, this review highlights the toxicity and pharmacokinetics of QD bioconjugates.

Emerging ultrasmall luminescent nanoprobes for in vivo bioimaging

Photoluminescence (PL) imaging has become a fundamental tool in disease diagnosis, therapeutic evaluation, and surgical navigation applications. However, it remains a big challenge to engineer nanoprobes for high-efficiency in vivo imaging and clinical translation. Recent years have witnessed increasing research efforts devoted into engineering sub-10 nm ultrasmall nanoprobes for in vivo PL imaging, which offer the advantages of efficient body clearance, desired clinical translation potential, and high imaging signal-to-noise ratio. In this review, we present a comprehensive summary and contrastive discussion of emerging ultrasmall luminescent nanoprobes towards in vivo PL bioimaging of diseases. We first summarize size-dependent nano-bio interactions and imaging features, illustrating the unique attributes and advantages/disadvantages of ultrasmall nanoprobes differentiating them from molecular and large-sized probes. We also discuss general design methodologies and PL properties of emerging ultrasmall luminescent nanoprobes, which are established based on quantum dots, metal nanoclusters, lanthanide-doped nanoparticles, and silicon nanoparticles. Then, recent advances of ultrasmall luminescent nanoprobes are highlighted by surveying their latest in vivo PL imaging applications. Finally, we discuss existing challenges in this exciting field and propose some strategies to improve in vivo PL bioimaging and further propel their clinical applications.

Facile synthesis of non-modified yellow emission silicon quantum dots and their visualization of hydrogen sulfide in living cells and onion tissues

Yellow fluorescent silicon quantum dots (y-SiQDs) with 22.2% fluorescence quantum yield were synthesized by a simple hydrothermal method using 3-glycidoxypropyl triethoxysilane (GOTS) and m-aminophenol. The excitation wavelength is 550 nm with an emission wavelength of 574 nm, which effectively avoids the interference of biological autofluorescence. Notably, the synthesis approach does not require any post-modification and the y-SiQDs can be directly used for hydrogen sulfide (H₂S) quantification due to static quenching. It exhibits high sensitivity and excellent selectivity for H₂S with a 0.2-10 μM (R² = 0.9953) linear range and detection limit of 54 nM. y-SiQDs have excellent stability and biocompatibility and can be used for H₂S imaging in living cells and onion tissues.

Protein-directed synthesis of fluorescent sulfur quantum dots for highly robust detection of pyrophosphate

Inorganic pyrophosphate anions (PPi) play a key role in various biological processes and act as an essential indicator for physiological function evaluation and disease diagnosis. However, there is still a lack of available approaches for straightforward, robust, and convenient PPi detection. Herein, we design an on-off-on fluorescent switching nanoprobe employing Fe³⁺-mediated fluorescent sulfur quantum dots (SQDs) for highly robust detection of PPi. The bovine serum protein (BSA)-capped SQDs with fine water dispersibility and good optical stability are synthesized by an H₂O₂-assisted chemical etching reaction. Specifically, Fe³⁺ can strongly induce the aggregation of the SQDs into relatively larger sizes, resulting in aggregation-induced fluorescence quenching behavior. PPi can selectively bind with Fe³⁺ via emulative coordination and in preventing the aggregation of SQDs this is accompanied by recovery of fluorescence. The physicochemical properties of aggregated and disaggregated SQDs have been systematically investigated. Aggregation and disaggregation of the SQDs and the corresponding quenching and recovery of fluorescence occurs and guarantees the high-contrast sensing performance of the SQD system in complex and challenging aquatic environments. Our designed on-off-on nanoswitch holds great potential for the design of elemental quantum dot-based biosensors for the highly robust detection of analytes in the near future.

Nano-bio interaction between human immunoglobulin G and nontoxic, near-infrared emitting water-borne silicon quantum dot micelles

In recent years, the field of nanomaterials has exponentially expanded with versatile biological applications. However, one of the roadblocks to their clinical translation is the critical knowledge gap about how the nanomaterials interact with the biological microenvironment (nano-bio interactions). When nanomaterials are used as drug carriers or contrast agents for biological imaging, the nano-bio interaction-mediated protein conformational changes and misfolding could lead to disease-related molecular alterations and/or cell death. Here, we studied the conformation changes of human immunoglobulin G (IgG) upon interaction with silicon quantum dots functionalized with 1-decene, Pluronic-F127 (SiQD-De/F127 micelles) using UV-visible, fluorescence steady state and excited state kinetics, circular dichroism, and molecular modeling. Decene monolayer terminated SiQDs are accumulated inside the Pluronic F127 shells to form SiQD-De/F127 micelles and were shown to bind strongly with IgG. In addition, biological evaluation studies in cell lines (HeLa, Fibroblast) and medaka fish (eggs and larvae) showed enhanced uptake and minimal cytotoxicity. Our results substantiate that engineered QDs obviating the protein conformational changes could have adept bioefficacy.

Surface decorated quantum dots: Synthesis, properties and role in herbal therapy

Quantum dots are the serendipitous outcome of materials research. It is the tiny carbonaceous nanoparticles with diameters ranging from 1 to 10 nm. This review is a brief discussion of the synthesis, properties, and biomedical applicability of quantum dots, especially in herbal therapy. As quantum dots are highly polar, they can be surface decorated with several kinds of polar functionalities, such as polymeric molecules, small functional molecules, and so on. The review also consists of the basic physical and optical properties of quantum dots and their excitation-dependent properties in the application section. We focus on therapeutics, where quantum dots are used as drugs or imaging probes. Nanoprobes for several diagnostics are quite new in the biomedical research domain. Quantum dot-based nanoprobes are in high demand due to their excellent fluorescence, non-bleaching nature, biocompatibility, anchoring feasibility for several analytes, and fast point-of-care sensibility. Lastly, we also included a discussion on quantum dot-based drug delivery as phytomedicine.

Quantum dots in the biomedical world: A smart advanced nanocarrier for multiple venues application

Quantum dots (QDs) are semiconducting nanoparticles having different optical and electrical properties when compared to larger particles. They exhibit photoluminescence when irradiated with ultraviolet light, which is due to the transition of an excited electron from the valence band to the conductance band followed by the return of the exciting electron back into the valence band. The size and material of QDs can affect their optical and other properties too. The QDs possess special attributes like high brightness, protection from photobleaching, photostability, color tunability, low toxicity, low production cost, a multiplexing limit, and a high surface-to-volume proportion, which make them a promising tool for biomedical applications. Here, in this study, we summarize the utilization of QDs in different applications including bioimaging, diagnostics, immunostaining, single-cell analysis, drug delivery, and protein detection. Moreover, we discuss the advantages and challenges of using QDs in biomedical applications when compared with other conventional tools.

Fluorescent Nanoparticles for Super-Resolution Imaging

Super-resolution imaging techniques that overcome the diffraction limit of light have gained wide popularity for visualizing cellular structures with nanometric resolution. Following the pace of hardware developments, the availability of new fluorescent probes with superior properties is becoming ever more important. In this context, fluorescent nanoparticles (NPs) have attracted increasing attention as bright and photostable probes that address many shortcomings of traditional fluorescent probes. The use of NPs for super-resolution imaging is a recent development and this provides the focus for the current review. We give an overview of different super-resolution methods and discuss their demands on the properties of fluorescent NPs. We then review in detail the features, strengths, and weaknesses of each NP class to support these applications and provide examples from their utilization in various biological systems. Moreover, we provide an outlook on the future of the field and opportunities in material science for the development of probes for multiplexed subcellular imaging with nanometric resolution.

Sulfur quantum dots as a novel platform to design a sensitive chemiluminescence probe and its application for Pb2+ detection

The monitoring of Pb as a hazardous heavy metal element for the environment and human health is of high importance. In this study, a simple and sensitive chemiluminescence (CL) probe based on sulfur quantum dots (SQDs) was designed for the determination of Pb²⁺ . To the best of our knowledge, this is the first report about the analytical application of the CL method based on SQDs. For this purpose, SQDs were synthesized by a simple hydrothermal method and characterized by TEM, FT-IR, XPS and X-ray diffraction. Then, the direct chemiluminescence (CL) of SQDs elicited by common oxidants was investigated. The highest CL intensity was observed for the SQDs-KMnO₄ reaction, and its CL mechanism was studied. We indicated that the CL intensity of introduced system can be diminished as a result of interaction between Pb²⁺ and SQDs, and exploited this fact for designing a CL-based probe for the determination of Pb²⁺ . The CL intensity of SQDs-KMnO₄ reaction was linearly quenched by Pb²⁺ at the range of 50 to 2000 nM with a limit of detection as 16 nM (S/N=3). The probe was employed for the determination of Pb²⁺ in different water samples and the recovery results (95.2 to 102.8%) indicated the good analytical performance of the developed method.

Ferritin: A Promising Nanoreactor and Nanocarrier for Bionanotechnology

The essence of bionanotechnology lies in the application of nanotechnology/nanomaterials to solve the biological problems. Quantum dots and nanoparticles hold potential biomedical applications, but their inherent problems such as low solubility and associated toxicity due to their interactions at nonspecific target sites is a major concern. The self-assembled, thermostable, ferritin protein nanocages possessing natural iron scavenging ability have emerged as a potential solution to all the above-mentioned problems by acting as nanoreactor and nanocarrier. Ferritins, the cellular iron repositories, are hollow, spherical, symmetric multimeric protein nanocages, which sequester the excess of free Fe(II) and synthesize iron biominerals (Fe₂O₃·H₂O) inside their ∼5-8 nm central cavity. The electrostatics and dynamics of the pore residues not only drives the natural substrate Fe²⁺ inside ferritin nanocages but also uptakes a set of other metals ions/counterions during in vitro synthesis of nanomaterial. The current review aims to report the recent developments/understanding on ferritin structure (self-assembly, surface/pores electrostatics, metal ion binding sites) and chemistry occurring inside these supramolecular protein cages (protein mediated metal ion uptake and mineralization/nanoparticle formation) along with its surface modification to exploit them for various nanobiotechnological applications. Furthermore, a better understanding of ferritin self-assembly would be highly useful for optimizing the incorporation of nanomaterials via the disassembly/reassembly approach. Several studies have reported the successful engineering of these ferritin protein nanocages in order to utilize them as potential nanoreactor for synthesizing/incorporating nanoparticles and as nanocarrier for delivering imaging agents/drugs at cell specific target sites. Therefore, the combination of nanoscience (nanomaterials) and bioscience (ferritin protein) projects several benefits for various applications ranging from electronics to medicine.

Recent Advances in Intrinsically Fluorescent Polydopamine Materials

Fluorescence nanoparticles have gained much attention due to their unique properties in the sensing and imaging fields. Among the very successful candidates are fluorescent polydopamine (FPDA) nanoparticles, attributed to their simplicity in tracing and excellent biocompatibility. This article aims to highlight the recent achievements in FPDA materials, especially on the part of luminescence mechanisms. We focus on the intrinsic fluorescence of PDA and will not discuss fluorescent reaction with a fluorometric reagent or coupling reaction with a fluorophore, which may cause more in vivo interferences. We believe that intrinsic FPDA presents great potential in bioapplications.

Re(I) Complexes as Backbone Substituents and Cross-Linking Agents for Hybrid Luminescent Polysiloxanes and Silicone Rubbers

This study focuses on the synthesis of hybrid luminescent polysiloxanes and silicone rubbers grafted by organometallic rhenium(I) complexes using Cu(I)-catalyzed azido-alkyne cycloaddition (CuAAC). The design of the rhenium(I) complexes includes using a diimine ligand to create an MLCT luminescent center and the introduction of a triple C≡C bond on the periphery of the ligand environment to provide click-reaction capability. Poly(3-azidopropylmethylsiloxane-co-dimethylsiloxane) (N₃-PDMS) was synthesized for incorporation of azide function in polysiloxane chain. [Re(CO)₃(MeCN)(5-(4-ethynylphenyl)-2,2′-bipyridine)]OTf (Re1) luminescent complex was used to prepare a luminescent copolymer with N₃-PDMS (Re1-PDMS), while [Re(CO)₃Cl(5,5′-diethynyl-2,2′-bipyridine)] (Re2) was used as a luminescent cross-linking agent of N₃-PDMS to obtain luminescent silicone rubber (Re2-PDMS). The examination of photophysical properties of the hybrid polymer materials obtained show that emission profile of Re(I) moiety remains unchanged and metallocenter allows to control the creation of polysiloxane-based materials with specified properties.

Potential of Nanocarrier-Based Drug Delivery Systems for Brain Targeting: A Current Review of Literature

The advent of nanotechnologies such as nanocarriers and nanotherapeutics has changed the treatment strategy and developed a more efficacious novel drug delivery system. Various drug delivery systems are focused on drug-targeting of brain cells. However, the manifestation of the brain barrier is the main hurdle for the effective delivery of chemotherapeutics, ultimately causing treatment failure of various drugs. To solve this problem, various nanocarrier-based drug delivery system has been developed for brain targeting. This review outlines nanocarrier-based composites for different brain diseases and highlights nanocarriers for drug targeting towards brain cells. It also summarizes the latest developments in nanocarrier-based delivery systems containing liposomal systems, dendrimers, polymeric micelles, polymeric nanocarriers, quantum dots (QDs), and gold nanoparticles. Besides, the optimal properties of nanocarriers and therapeutic implications for brain targeting have been extensively studied. Finally, the potential applications and research opportunities for nanocarriers in brain targeting are discussed.

Drug Release Profiles of Mitomycin C Encapsulated Quantum Dots-Chitosan Nanocarrier System for the Possible Treatment of Non-Muscle Invasive Bladder Cancer

Nanotechnology-based drug delivery systems are an emerging technology for the targeted delivery of chemotherapeutic agents in cancer therapy with low/no toxicity to the non-cancer cells. With that view, the present work reports the synthesis, characterization, and testing of Mn:ZnS quantum dots (QDs) conjugated chitosan (CS)-based nanocarrier system encapsulated with Mitomycin C (MMC) drug. This fabricated nanocarrier, MMC@CS-Mn:ZnS, has been tested thoroughly for the drug loading capacity, drug encapsulation efficiency, and release properties at a fixed wavelength (358 nm) using a UV-Vis spectrophotometer. Followed by the physicochemical characterization, the cumulative drug release profiling data of MMC@CS-Mn:ZnS nanocarrier (at pH of 6.5, 6.8, 7.2, and 7.5) were investigated to have the highest release of 56.48% at pH 6.8, followed by 50.22%, 30.88%, and 10.75% at pH 7.2, 6.5, and 7.5, respectively. Additionally, the drug release studies were fitted to five different pharmacokinetic models including pesudo-first-order, pseudo-second-order, Higuchi, Hixson-Crowell, and Korsmeyers-Peppas models. From the analysis, the cumulative MMC release suits the Higuchi model well, revealing the diffusion-controlled mechanism involving the correlation of cumulative drug release proportional to the function square root of time at equilibrium, with the correlation coefficient values (R2) of 0.9849, 0.9604, 0.9783, and 0.7989 for drug release at pH 6.5, 6.8, 7.2, and 7.5, respectively. Based on the overall results analysis, the formulated nanocarrier system of MMC synergistically envisages the efficient delivery of chemotherapeutic agents to the target cancerous sites, able to sustain it for a longer time, etc. Consequently, the developed nanocarrier system has the capacity to improve the drug loading efficacy in combating the reoccurrence and progression of cancer in non-muscle invasive bladder diseases.

Inorganic nanomaterials with rapid clearance for biomedical applications

Inorganic nanomaterials that have inherently exceptional physicochemical properties (e.g., catalytic, optical, thermal, electrical, or magnetic performance) that can provide desirable functionality (e.g., drug delivery, diagnostics, imaging, or therapy) have considerable potential for application in the field of biomedicine. However, toxicity can be caused by the long-term, non-specific accumulation of these inorganic nanomaterials in healthy tissues, preventing their large-scale clinical utilization. Over the past several decades, the emergence of biodegradable and clearable inorganic nanomaterials has offered the potential to prevent such long-term toxicity. In addition, a comprehensive understanding of the design of such nanomaterials and their metabolic pathways within the body is essential for enabling the expansion of theranostic applications for various diseases and advancing clinical trials. Thus, it is of critical importance to develop biodegradable and clearable inorganic nanomaterials for biomedical applications. This review systematically summarizes the recent progress of biodegradable and clearable inorganic nanomaterials, particularly for application in cancer theranostics and other disease therapies. The future prospects and opportunities in this rapidly growing biomedical field are also discussed. We believe that this timely and comprehensive review will stimulate and guide additional in-depth studies in the area of inorganic nanomedicine, as rapid in vivo clearance and degradation is likely to be a prerequisite for the future clinical translation of inorganic nanomaterials with unique properties and functionality.

Fluorescent nanoparticles as tools in ecology and physiology

Fluorescent nanoparticles (FNPs) have been widely used in chemistry and medicine for decades, but their employment in biology is relatively recent. Past reviews on FNPs have focused on chemical, physical or medical uses, making the extrapolation to biological applications difficult. In biology, FNPs have largely been used for biosensing and molecular tracking. However, concerns over toxicity in early types of FNPs, such as cadmium-containing quantum dots (QDs), may have prevented wide adoption. Recent developments, especially in non-Cd-containing FNPs, have alleviated toxicity problems, facilitating the use of FNPs for addressing ecological, physiological and molecule-level processes in biological research. Standardised protocols from synthesis to application and interdisciplinary approaches are critical for establishing FNPs in the biologists' tool kit. Here, we present an introduction to FNPs, summarise their use in biological applications, and discuss technical issues such as data reliability and biocompatibility. We assess whether biological research can benefit from FNPs and suggest ways in which FNPs can be applied to answer questions in biology. We conclude that FNPs have a great potential for studying various biological processes, especially tracking, sensing and imaging in physiology and ecology.

Current Status of Brain Tumor in the Kingdom of Saudi Arabia and Application of Nanobiotechnology for Its Treatment: A Comprehensive Review

OBJECTIVE

Brain tumors are the most challenging of all tumors and accounts for about 3% of all cancer allied deaths. The aim of the present review is to examine the brain tumor prevalence and treatment modalities available in the Kingdom of Saudi Arabia. It also provides a comprehensive analysis of the application of various nanotechnology-based products for brain cancer treatments along with their prospective future advancements.

METHODS

A literature review was performed to identify and summarize the current status of brain cancer in Saudi Arabia and the scope of nanobiotechnology in its treatment.

RESULTS

Depending upon the study population data analysis, gliomas, astrocytoma, meningioma, and metastatic cancer have a higher incidence rate in Saudi Arabia than in other countries, and are mostly treated in accordance with conventional treatment modalities for brain cancer. Due to the poor prognosis of cancer, it has an average survival rate of 2 years. Conventional therapy includes surgery, radiotherapy, chemotherapy, and a combination thereof, but these do not control the disease's recurrence. Among the various nanomaterials discussed, liposomes and polymeric nanoformulations have demonstrated encouraging outcomes for facilitated brain cancer treatment.

CONCLUSIONS

Nanomaterials possess the capacity to overcome the shortcomings of conventional therapies. Polymer-based nanomaterials have shown encouraging outcomes against brain cancer when amalgamated with other nano-based therapies. Nonetheless, nanomaterials could be devised that possess minimal toxicity towards normal cells or that specifically target tumor cells. In addition, rigorous clinical investigations are warranted to prepare them as an efficient and safe modality for brain cancer therapy.

Microfluidic synthesis of quantum dots and their applications in bio-sensing and bio-imaging

Bio-sensing and bio-imaging of organisms or molecules can provide key information for the study of physiological processes or the diagnosis of diseases. Quantum dots (QDs) stand out to be promising optical detectors because of their excellent optical properties such as high brightness, stability, and multiplexing ability. Diverse approaches have been developed to generate QDs, while microfluidic technology is one promising path for their industrial production. In fact, microfluidic devices provide a controllable, rapid and effective route to produce high-quality QDs, while serving as an effective in situ platform to understand the synthetic mechanism or optimize reaction parameters for QD production. In this review, the recent research progress in microfluidic synthesis and bio-detection applications of QDs is discussed. The definitions of different QDs are first introduced, and the advances in microfluidic-based fabrication of quantum dots are summarized with a focus on perovskite QDs and carbon QDs. In addition, QD-based bio-sensing and bio-imaging technologies for organisms of different scales are described in detail. Finally, perspectives for future development of microfluidic synthesis and applications of QDs are presented.

Photoluminescent Nanomaterials for Medical Biotechnology

Creation of various photoluminescent nanomaterials has significantly expanded the arsenal of approaches used in modern biomedicine. Their unique photophysical properties can significantly improve the sensitivity and specificity of diagnostic methods, increase therapy effectiveness, and make a theranostic approach to treatment possible through the application of nanoparticle conjugates with functional macromolecules. The most widely used nanomaterials to date are semiconductor quantum dots; gold nanoclusters; carbon dots; nanodiamonds; semiconductor porous silicon; and up-conversion nanoparticles. This paper considers the promising groups of photoluminescent nanomaterials that can be used in medical biotechnology: in particular, for devising agents for optical diagnostic methods, sensorics, and various types of therapy.

Synthesis of Silicon Nanoparticles Emitting Yellow-Green Fluorescence for Visualization of pH Change and Determination of Intracellular pH of Living Cells

In order to understand related pathogenesis of some diseases and design new intracellular drug delivery systems, investigation of pH change in living cells in real time is important. In this paper, a new style of fluorescent silicon nanoparticles (SiNPs) as a pH-sensitive probe and for the visualization of the pH changes in cells was designed and prepared using 4-aminophenol as a reducing agent and N-aminoethyl-γ-aminopropyltrimethyl as a silicon source by a one-pot hydrothermal method. It was particularly noteworthy that the fluorescence intensity emitted from the SiNPs positively correlated with the pH value of solutions, making the SiNPs a viable probe used for sensitive sensing of pH. At the same time, a response of the probe to the pH was found in 5.0-10.0, and the SiNPs have an excellent biocompatibility (e.g., ∼74% of cell viability was remained after treatment for 24 h at 500 μg/mL of the SiNPs). The proposed method that could display the change in pH of live cells provided an effective means for visually diagnosing diseases related to intracellular pH.

Biosensing platforms based on silicon nanostructures: A critical review

Biosensors are revolutionizing the health-care systems worldwide, permitting to survey several diseases, even at their early stage, by using different biomolecules such as proteins, DNA, and other biomarkers. However, these sensing approaches are still scarcely diffused outside the specialized medical and research facilities. Silicon is the undiscussed leader of the whole microelectronics industry, and novel sensors based on this material may completely change the health-care scenario. In this review, we will show how novel sensing platforms based on Si nanostructures may have a disruptive impact on applications with a real commercial transfer. A critical study for the main Si-based biosensors is herein presented with a comparison of their advantages and drawbacks. The most appealing sensing devices are discussed, starting from electronic transducers, with Si nanowires field-effect transistor (FET) and porous Si, to their optical alternatives, such as effective optical thickness porous silicon, photonic crystals, luminescent Si quantum dots, and finally luminescent Si NWs. All these sensors are investigated in terms of working principle, sensitivity, and selectivity with a specific focus on the possibility of their industrial transfer, and which ones may be preferred for a medical device.

Unsupervised structure classes vs. supervised property classes of silicon quantum dots using neural networks

Machine learning classification is a useful technique to predict structure/property relationships in samples of nanomaterials where distributions of sizes and mixtures of shapes are persistent. The separation of classes, however, can either be supervised based on domain knowledge (human intelligence), or based entirely on unsupervised machine learning (artificial intelligence). This raises the questions as to which approach is more reliable, and how they compare? In this study we combine an ensemble data set of electronic structure simulations of the size, shape and peak wavelength for the optical emission of hydrogen passivated silicon quantum dots with artificial neural networks to explore the utility of different types of classes. By comparing the domain-driven and data-driven approaches we find there is a disconnect between what we see (optical emission) and assume (that a particular color band represents a special class), and what the data supports. Contrary to expectation, controlling a limited set of structural characteristics is not specific enough to classify a quantum dot based on color, even though it is experimentally intuitive.

Visible-to-NIR-Light Activated Release: From Small Molecules to Nanomaterials

Photoactivatable (alternatively, photoremovable, photoreleasable, or photocleavable) protecting groups (PPGs), also known as caged or photocaged compounds, are used to enable non-invasive spatiotemporal photochemical control over the release of species of interest. Recent years have seen the development of PPGs activatable by biologically and chemically benign visible and near-infrared (NIR) light. These long-wavelength-absorbing moieties expand the applicability of this powerful method and its accessibility to non-specialist users. This review comprehensively covers organic and transition metal-containing photoactivatable compounds (complexes) that absorb in the visible- and NIR-range to release various leaving groups and gasotransmitters (carbon monoxide, nitric oxide, and hydrogen sulfide). The text also covers visible- and NIR-light-induced photosensitized release using molecular sensitizers, quantum dots, and upconversion and second-harmonic nanoparticles, as well as release via photodynamic (photooxygenation by singlet oxygen) and photothermal effects. Release from photoactivatable polymers, micelles, vesicles, and photoswitches, along with the related emerging field of photopharmacology, is discussed at the end of the review.

Emergence of sulfur quantum dots: Unfolding their synthesis, properties, and applications

Over the past few decades, the sphere of applied science has witnessed soaring demand in developing high performance, novel and sustainable materials due to ever-increasing population coupled with need for alternative-green-energy resources. Inevitably, sulfur research expands through the breadth of materials sciences including sustainable use of the by-products obtained from petroleum industry, preparation of biocompatible materials, and constructing energy harvesting devices, indispensable to our everyday lives. Congruous with popular heavy-metal free elemental quantum dots such as the carbon, silicon and phosphorus, emergence of sulfur quantum dots (SQDs) has drawn substantial attention due to their bright luminescence, infrequent to other sulfur allotropes. In this review article, we focus some of the pioneering advances on synthesis and characterizations of luminescent sulfur nanodots and their potential applications in bioimaging, fabrication of light emitting devices, sensing and catalysis. Finally, critical challenges along with future perspectives corresponding to this newly discovered research area have been discussed.

Group IV nanodots: synthesis, surface engineering and application in bioimaging and biotherapy

Group IV nanodots (NDs) mainly including carbon (C), silicon (Si), germanium (Ge) have aroused much attention as one type of important nanomaterials that are widely studied in optoelectronics, semiconductors, sensors and biomedicine-related fields owing to the low cost of synthesis, good stability, excellent biocompatibility, and some attractive newly emerged properties. In this review, the synthesis, surface engineering and application in bioimaging and biotherapy of group IV NDs are summarized and discussed. The recent progress in the rational synthesis and functionalization, specific therapy-related properties, together with in vivo and in vitro bioimaging are highlighted. Their new applications in biotherapy such as photothermal therapy (PTT) and photodynamic therapy (PDT) are illustrated with respect to C, Si and Ge NDs. The current challenges and future applications of these emerging materials in bioimaging and biotherapy are presented. This review provides readers with a distinct perspective of the group IV NDs nanomaterials for synthesis and surface engineering, and newly emerging properties related to applications in biomedicine.

Synthesis and characterization of proanthocyanidin-chitosan nanoparticles: An assessment on human colorectal carcinoma HT-29 cells

Cancer nanotheranostic materials are helpful in monitoring drug delivery and efficacy against tumor cells. Current chemotherapeutic may have adverse side effects and this necessity to discover the new modern therapeutic nano-drugs. In the present study, we designed the new targeted and degradable polymer of bio-active chitosan nanoparticles with proanthocyanidin (PAC-CSNPs) and evaluated its apoptotic effects against human colorectal carcinoma cells (HT-29). The functional groups were characterized by Fourier-transform infrared spectroscopy and transmission electron microscope. Further, their dispersion of spherical form nanoparticle with an average size of 73.43 nm used for drug delivery system. The PAC-CSNPs were targeted to inhibit the cyclin-dependent kinases and prevent cell cycle/cell division in cancer cells. At high concentrations of PAC (25 μg/mL) exposure, cell viability of HT-29 cells was greater than 80%. However, at low concentrations of PAC-CSNPs (6.25 μg/mL) exposure, HT-29 cell mortality was high, which may be due to the efficient drug release by CSNPs. The percentage of reactive oxygen species (ROS) levels were 12 ± 2.52% (control), 39 ± 4.32% (PAC), and 85.06 ± 3.54% (PAC-CSNPs). The over production of ROS by PAC-CSNPs can prompt DNA damage, cell death and apoptosis in HT-29 cells. The in vivo toxicity of synthesized PAC-CSNPs was tested against zebra fish observed at dose-time-dependent intervals. In conclusion, the PAC-CSNPs enhanced HT-29 cell death and shows promise as a novel future nano-therapy for cancer.

Amine functionalised silicon nanocrystals with bright red and long-lived emission

When functionalised with amines, silicon nanocrystals (SiNCs) are known to have surface-state emission with loss of colour tunability, low quantum yield and short nanosecond lifetimes. These changes in optical properties are produced by direct amine bonding on the silicon surface. In this article, secondary amine functionalised SiNCs with bright, red (λmax = 750 nm) and long-lived emission (τ ca. 50 μs) are reported for the first time via a three-step synthetic approach. These SiNCs are colloidally stable in several polar solvents and can be further functionalised by reaction with carboxylic acid groups. We proved the feasibility of further functionalization with pyrene butyric acid: ca. 40 pyrene units per nanoparticle were attached via amide bond formation. The resulting hybrid system works as a light-harvesting antenna: excitation of pyrene units at 345 nm results in sensitised emission at 700 nm by the silicon core.

Luminescent gold nanoclusters for bioimaging applications

Luminescent nanomaterials have emerged as attractive candidates for sensing, catalysis and bioimaging applications in recent years. For practical use in bioimaging, nanomaterials with high photoluminescence, quantum yield, photostability and large Stokes shifts are needed. While offering high photoluminescence and quantum yield, semiconductor quantum dots suffer from toxicity and are susceptible to oxidation. In this context, atomically precise gold nanoclusters protected by thiol monolayers have emerged as a new class of luminescent nanomaterials. Low toxicity, bioavailability, photostability as well as tunable size, composition, and optoelectronic properties make them suitable for bioimaging and biosensing applications. In this review, an overview of the sensing of pathogens, and of in vitro and in vivo bioimaging using luminescent gold nanoclusters along with the limitations with selected examples are discussed.

Poly(methyl methacrylate) Films with High Concentrations of Silicon Quantum Dots for Visibly Transparent Luminescent Solar Concentrators

Silicon quantum dots (Si QDs) are attractive, nontoxic luminophores for luminescent solar concentrators (LSCs). Here, we produced Si QD/poly(methyl methacrylate) (PMMA) films on glass by doctor-blading polymer solutions and achieved films with low light scattering at an order of magnitude higher Si QD weight fraction than has been achieved previously in the bulk. We suggest that the fast solidification rate of films as compared to slow bulk polymerization is an enabling factor in avoiding large agglomerates within the nanocomposites. Scanning electron microscopy confirmed that ∼100 nm or larger QD agglomerates exist in light-scattering films, and photoluminescence intensity measurements show that light scattering, if present, significantly reduces waveguiding efficiencies for LSCs. Nonscattering films fabricated in this work exhibit high ultraviolet absorption (>80%) paired with high visible transmission (>87%) and minimal visible haze (∼1%), making them well suited for semitransparent coatings for LSCs realized as solar harvesting windows.

Synthesis of PEG-grafted boron doped Si nanocrystals

Silicon nanocrystals are intriguing materials for biomedical imaging applications because of their unique optical properties and biological compatibility. We report a new surface functionalization route to synthesize biological buffer soluble and colloidally stable silicon nanocrystals, which is enabled by surface boron doping. Harnessing the distinctive Lewis acidic boron surface sites, postsynthetic modifications of plasma synthesized boron doped nanocrystals were carried out with polyethylene glycol (PEG-OH) ligands in dimethyl sulfoxide under photochemical conditions. The influence of PEG concentration, PEG molecular weight, and boron doping percentage on the nanocrystal solubility in a biological buffer has been investigated. The boron doping facilitates the surface functionalization via two probable pathways, by providing excellent initial dispersiblity in polar solvents and providing available acidic boron surface sites for bonding. These boron doped silicon nanocrystals have nearly identical absorption features as intrinsic silicon nanocrystals, indicating that they are promising candidates for biological imaging applications.

Si quantum dots enhanced hydrogen bonds networks of liquid water in a stimulated Raman scattering process

Stimulated Raman scattering (SRS) of silicon quantum dots (Si QD) water solutions of different sizes (2 and 5 nm) are investigated using Nd:YAG laser. Since strong and weak hydrogen bonds are formed by the charge transfer between water molecules and Si QDs, two SRS peaks of OH stretching vibrations of Si QDs solutions are observed in the forward direction. Simultaneously, characteristic feature peaks related to the interaction between OH groups and excess electrons are obtained in the backward SRS of 2 nm Si QDs solutions. The excess electrons induce a strong electrostatic field, leading to the transformation from water to an ice-VIII structure.

Quantum dot therapeutics: a new class of radical therapies

Traditional therapeutics and vaccines represent the bedrock of modern medicine, where isolated biochemical molecules or designed proteins have led to success in treating and preventing diseases. However, several adaptive pathogens, such as multidrug-resistant (MDR) superbugs, and rapidly evolving diseases, such as cancer, can evade such molecules very effectively. This poses an important problem since the rapid emergence of multidrug-resistance among microbes is one of the most pressing public health crises of our time-one that could claim more than 10 million lives and 100 trillion dollars annually by 2050. Several non-traditional antibiotics are now being developed that can survive in the face of adaptive drug resistance. One such versatile strategy is redox perturbation using quantum dot (QD) therapeutics. While redox molecules are nominally used by cells for intracellular signaling and other functions, specific generation of such species exogenously, using an electromagnetic stimulus (light, sound, magnetic field), can specifically kill the cells most vulnerable to such species. For example, recently QD therapeutics have shown tremendous promise by specifically generating superoxide intracellularly (using light as a trigger) to selectively eliminate a wide range of MDR pathogens. While the efficacy of such QD therapeutics was shown using in vitro studies, several apparent contradictions exist regarding QD safety and potential for clinical applications. In this review, we outline the design rules for creating specific QD therapies for redox perturbation; summarize the parameters for choosing appropriate materials, size, and capping ligands to ensure their facile clearance; and highlight a potential path forward towards developing this new class of radical QD therapeutics.

Nanotechnology Meets Oncology: Nanomaterials in Brain Cancer Research, Diagnosis and Therapy

Advances in technology of the past decades led to development of new nanometer scale diagnosis and treatment approaches in cancer medicine leading to establishment of nanooncology. Inorganic and organic nanomaterials have been shown to improve bioimaging techniques and targeted drug delivery systems. Their favorable physico-chemical characteristics, like small sizes, large surface area compared to volume, specific structural characteristics, and possibility to attach different molecules on their surface transform them into excellent transport vehicles able to cross cell and/or tissue barriers, including the blood–brain barrier. The latter is one of the greatest challenges in diagnosis and treatment of brain cancers. Application of nanomaterials can prolong the circulation time of the drugs and contrasting agents in the brain, posing an excellent opportunity for advancing the treatment of the most aggressive form of the brain cancer—glioblastomas. However, possible unwanted side-effects and toxicity issues must be considered before final clinical translation of nanoparticles.

Molecular interaction of silicon quantum dot micelles with plasma proteins: hemoglobin and thrombin

Protein conformational changes are associated with potential cytotoxicity upon interaction with small molecules or nanomaterials. Protein misfolding leads to protein-mediated diseases; thus, it is important to study the conformational changes in proteins using nanoparticles as drug carriers. In this study, the conformational changes in hemoglobin and thrombin were observed using fluorescence spectroscopy, circular dichroism spectroscopy and molecular modelling studies after interaction with non-toxic, water-soluble near-infrared silicon quantum dot micelles. The molecular docking results indicated that the binding affinities of hemoglobin and thrombin with Si QD micelles are good. In addition, molecular dynamics simulations were performed to obtain more detailed information.

Overall graphical representation of 1-decene, F-127, and crystal structures of hemoglobin and thrombin.