Polymeric Materials for Gene Delivery and DNA Vaccination

Immunological nanomaterials to combat cancer metastasis

Metastasis causes greater than 90% of cancer-associated deaths, presenting huge challenges for detection and efficient treatment of cancer due to its high heterogeneity and widespread dissemination to various organs. Therefore, it is imperative to combat cancer metastasis, which is the key to achieving complete cancer eradication. Immunotherapy as a systemic approach has shown promising potential to combat metastasis. However, current clinical immunotherapies are not effective for all patients or all types of cancer metastases owing to insufficient immune responses. In recent years, immunological nanomaterials with intrinsic immunogenicity or immunomodulatory agents with efficient loading have been shown to enhance immune responses to eliminate metastasis. In this review, we would like to summarize various types of immunological nanomaterials against metastasis. Moreover, this review will summarize a series of immunological nanomaterial-mediated immunotherapy strategies to combat metastasis, including immunogenic cell death, regulation of chemokines and cytokines, improving the immunosuppressive tumour microenvironment, activation of the STING pathway, enhancing cytotoxic natural killer cell activity, enhancing antigen presentation of dendritic cells, and enhancing chimeric antigen receptor T cell therapy. Furthermore, the synergistic anti-metastasis strategies based on the combinational use of immunotherapy and other therapeutic modalities will also be introduced. In addition, the nanomaterial-mediated imaging techniques (e.g., optical imaging, magnetic resonance imaging, computed tomography, photoacoustic imaging, surface-enhanced Raman scattering, radionuclide imaging, etc.) for detecting metastasis and monitoring anti-metastasis efficacy are also summarized. Finally, the current challenges and future prospects of immunological nanomaterial-based anti-metastasis are also elucidated with the intention to accelerate its clinical translation.

GalNAc- or Mannose-PEG-Functionalized Polyplexes Enable Effective Lectin-Mediated DNA Delivery

A cationic, dendrimer-like oligo(aminoamide) carrier with four-arm topology based on succinoyl tetraethylene pentamine and histidines, cysteines, and N-terminal azido-lysines was screened for plasmid DNA delivery on various cell lines. The incorporated azides allow modification with various shielding agents of different polyethylene glycol (PEG) lengths and/or different ligands by copper-free click reaction, either before or after polyplex formation. Prefunctionalization was found to be advantageous over postfunctionalization in terms of nanoparticle formation, stability, and efficacy. A length of 24 ethylene oxide repetition units and prefunctionalization of ≥50% of azides per carrier promoted optimal polyplex shielding. PEG shielding resulted in drastically reduced DNA transfer, which could be successfully restored by active lectin targeting via novel GalNAc or mannose ligands, enabling enhanced receptor-mediated endocytosis of the carrier system. The involvement of the asialoglycoprotein receptor (ASGPR) in the uptake of GalNAc-functionalized polyplexes was confirmed in the ASGPR-positive hepatocarcinoma cell lines HepG2 and Huh7. Mannose-modified polyplexes showed superior cellular uptake and transfection efficacy compared to unmodified and shielded polyplexes in mannose-receptor-expressing dendritic cell-like DC2.4 cells.

Self-Assembling Polymers with p-Aminosalicylate Anions Supported by Encapsulation of p-Aminosalicylate for the Improvement of Drug Content and Release Efficiency

Bioactive linear choline-based copolymers were developed as micellar carriers for drug delivery systems (DDSs). The polymethacrylates containing trimethylammonium groups with p-aminosalicylate anions (PAS-based copolymers: series 1) or chloride anions (Cl-based copolymers: series 2) differing in ionic content and chain length were selected for drug loading. The diverse structures of amphiphilic copolymers made it possible to adjust the encapsulation efficiency of a well-known antibiotic, i.e., p-aminosalicylate in the form of sodium salt (PASNa) or acid (PASA), providing single drug systems. Goniometry was applied to verify the self-assembly capacity of the copolymers using the critical micelle concentration (CMC = 0.03-0.18 mg/mL) and the hydrophilicity level quantifying the surface wettability of polymer film using the water contact angle (WCA = 30-53°). Both parameters were regulated by the copolymer composition, indicating that the increase in ionic content caused higher CMC and lower WCA, but the latter was also modified to a less hydrophilic surface by drug encapsulation. The drug content (DC) in the PAS-based polymers was increased twice by encapsulation of PASNa and PASA (47-96% and 86-104%), whereas in the chloride-based polymer systems, the drug was loaded in 43-96% and 73-100%, respectively. Efficient drug release was detected for PASNa (80-100% series 1; 50-100% series 2) and PASA as complete in both series. The strategy of loading extra drug by encapsulation, which enhances the drug content in the copolymers containing anions of the same pharmaceutics, provided promising characteristics, which highlight the potential of PAS-loaded micellar copolymers for drug delivery.

Promising Gene Delivery Properties of Polycations Based on 2-(N,N-dimethylamino)ethyl Methacrylate and Polyethylene Glycol Monomethyl Ether Methacrylate Copolymers

Cationic copolymers based on 2-(N,N-dimethylamino)ethyl methacrylate and polyethylene glycol monomethyl ether (pDMAEMA-co-PEO) with different molecular weights have been synthesized. Their physicochemical properties were studied by NMR spectroscopy, sedimentation, and potentiometric titration. According to the data of potentiometric titration for the synthesized pegylated cationic copolymers, the apparent dissociation constants were determined in the pH range from 4.5 to 8.5. The physicochemical properties of interpolyelectrolyte complexes of these polycations with circular DNA (IPEC DNA) were also studied by dynamic light scattering, electrophoretic mobility, and TEM methods. It has been established that the diameter and electrokinetic potential (ζ-potential) of interpolyelectrolyte complexes can be varied over a wide range (from 200 nm to 1.5 μm and from -25 mV to +30 mV) by changing the ratio of oppositely charged ionizable groups in pegylated cationic copolymers and DNA, as well as by regulating medium pH. The resistance of the IPEC DNA/polycation complex to the action of nucleases was studied by electrophoresis in agarose gel; the cytotoxic effect of the polymers in vitro, and the efficiency of penetration (transfection) of IPEC DNA with PDMAEMA-co-PEO-polycations into eukaryotic cells of a cell line derived from human embryonic kidneys HEK 293 in vitro.

Branch Unit Distribution Matters for Gene Delivery

As a key nonviral gene therapy vector, poly(β-amino ester) (PAE) has demonstrated great potential for clinical application after two decades of development. However, even after extensive efforts in structural optimizations, including screening chemical composition, molecular weight (MW), terminal groups, and topology, their DNA delivery efficiency still lags behind that of viral vectors. To break through this bottleneck, in this work, a thorough investigation of highly branched PAEs (HPAEs) was conducted to correlate their fundamental internal structure with their gene transfection performance. We show that an essential structural factor, branch unit distribution (BUD), plays an important role for HPAE transfection capability and that HPAEs with a more uniform distribution of branch units display better transfection efficacy. By optimizing BUD, a high-efficiency HPAE that surpasses well-known commercial reagents (e.g., Lipofectamine 3000 (Lipo3000), jetPEI, and Xfect) can be generated. This work opens an avenue for the structural control and molecular design of high-performance PAE gene delivery vectors.

Long-acting vaccine delivery systems

Bolus vaccines are often administered multiple times due to rapid clearance and reduced transportation to draining lymph nodes resulting in inadequate activation of T and B lymphocytes. In order to achieve adaptive immunity, prolonged exposure of antigens to these immune cells is crucial. Recent research has been focusing on developing long-acting biomaterial-based vaccine delivery systems, which can modulate the release of encapsulated antigens or epitopes to facilitate enhanced antigen presentation in lymph nodes and subsequently achieve robust T and B cell responses. Over the past few years, various polymers and lipids have been extensively explored to develop effective biomaterial-based vaccine strategies. The article reviews relevant polymer and lipid-based strategies used to prepare long-acting vaccine carriers and discusses their results concerning immune responses.

A New Optimization Strategy of Highly Branched Poly(β-Amino Ester) for Enhanced Gene Delivery: Removal of Small Molecular Weight Components

Highly branched poly(β-amino ester) (HPAE) has become one of the most promising non-viral gene delivery vector candidates. When compared to other gene delivery vectors, HPAE has a broad molecular weight distribution (MWD). Despite significant efforts to optimize HPAE targeting enhanced gene delivery, the effect of different molecular weight (MW) components on transfection has rarely been studied. In this work, a new structural optimization strategy was proposed targeting enhanced HPAE gene transfection. A series of HPAE with different MW components was obtained through a stepwise precipitation approach and applied to plasmid DNA delivery. It was demonstrated that the removal of small MW components from the original HPAE structure could significantly enhance its transfection performance (e.g., GFP expression increased 7 folds at w/w of 10/1). The universality of this strategy was proven by extending it to varying HPAE systems with different MWs and different branching degrees, where the transfection performance exhibited an even magnitude enhancement after removing small MW portions. This work opened a new avenue for developing high-efficiency HPAE gene delivery vectors and provided new insights into the understanding of the HPAE structure-property relationship, which would facilitate the translation of HPAEs in gene therapy clinical applications.

Tunable pH Sensitive Lipoplexes

To provide long circulating nanoparticles able to carry a gene to tumor cells, we have designed anionic pegylated lipoplexes which are pH sensitive. The reduction of positive charges in nucleic acid carriers allows reducing the elimination rate, increasing circulation time in the blood, leading to improved tumor accumulation of lipid nanoparticles. Anionic pegylated lipoplexes have been prepared from the combined formulation of cationic lipoplexes and pegylated anionic liposomes. The neutralization of the particle surface charge as a function of the pH was monitored by dynamic light scattering in order to determine the ratio between anionic and cationic lipids that would give pH-sensitive complexes. This ratio has been optimized to form particles sensitive to pH change in the range 5.5-6.5. Compaction of DNA into these newly formed anionic complexes was checked by DNA accessibility to Picogreen. The transfection efficiency and pH-sensitive property of these formulations were shown in vitro using bafilomycin, a vacuolar H⁺-ATPase inhibitor.

A Thermal and Enzymatic Dual-Stimuli Responsive DNA-Based Nanomachine for Controlled mRNA Delivery

The extreme instability of mRNA makes the practical application of mRNA-based vaccines heavily rely on efficient delivery system and cold chain transportation. Herein, a DNA-based nanomachine, which achieves programmed capture, long-term storage without cryopreservation, and efficient delivery of mRNA in cells, is developed. The polythymidine acid (Poly-T) functionalized poly(N-isopropylacrylamide) (DNA-PNIPAM) is synthesized and assembled as the central compartment of the nanomachine. The DNA-PNIPAM nano-assembly exhibits reversible thermal-responsive dynamic property: when lower than the low critical solution temperature (LCST, ≈32 °C) of PNIPAM, the DNA-PNIPAM transforms into extension state to expose the poly-T, facilitating the hybridization with polyadenylic acid (Poly-A) tail of mRNA; when higher than LCST, DNA-PNIPAM re-assembles and achieves an efficient encapsulation of mRNA. It is remarkable that the DNA-PNIPAM nano-assembly realizes long-term storage of mRNA (≈7 days) at 37 °C. Biodegradable 2-hydroxypropyltrimethyl ammonium chloride chitosan is assembled on the outside of DNA-PNIPAM to facilitate the endocytosis of mRNA, RNase-H mediating mRNA release occurs in cytoplasm, and efficient mRNA translation is achieved. This work provides a new disign principle of nanosystem for mRNA delivery.

Delivery of CRISPR/Cas9 Plasmid DNA by Hyperbranched Polymeric Nanoparticles Enables Efficient Gene Editing

Gene editing nucleases such as CRISPR/Cas9 have enabled efficient and precise gene editing in vitro and hold promise of eventually achieving in vivo gene editing based therapy. However, a major challenge for their use is the lack of a safe and effective virus-free system to deliver gene editing nuclease elements. Polymers are a promising class of delivery vehicle due to their higher safety compared to currently used viral vectors, but polymers suffer from lower transfection efficiency. Polymeric vectors have been used for small nucleotide delivery but have yet to be used successfully with plasmid DNA (pDNA), which is often several hundred times larger than small nucleotides, presenting an engineering challenge. To address this, we extended our previously reported hyperbranched polymer (HP) delivery system for pDNA delivery by synthesizing several variants of HPs: HP-800, HP-1.8K, HP-10K, HP-25K. We demonstrate that all HPs have low toxicity in various cultured cells, with HP-25K being the most efficient at packaging and delivering pDNA. Importantly, HP-25K mediated delivery of CRISPR/Cas9 pDNA resulted in higher gene-editing rates than all other HPs and Lipofectamine at several clinically significant loci in different cell types. Consistently, HP-25K also led to more robust base editing when delivering the CRISPR base editor "BE4-max" pDNA to cells compared with Lipofectamine. The present work demonstrates that HP nanoparticles represent a promising class of vehicle for the non-viral delivery of pDNA towards the clinical application of gene-editing therapy.

Facile Construction of a Two-in-One Injectable Micelleplex-Loaded Thermogel System for the Prolonged Delivery of Plasmid DNA

Nanoparticle-hydrogel systems have recently emerged as a class of interesting hybrid materials with immense potential for several biomedical applications. Remarkably, the incorporation of nanoparticles into a hydrogel may yield synergistic benefits lacking in a singular system. However, most synthetic strategies require laborious steps to achieve the system, severely restricting the process of translational research. Herein, a facile strategy to access a two-in-one system comprising two distinct polyurethane (PU)-based micellar systems is demonstrated and applied as a novel sustained gene delivery platform, where the two PUs are synthesized similarly but with slightly different compositions. One PU forms cationic micelles that complex with plasmid DNA (pDNA), which are loaded into a thermogel formed by another PU micellar system for the prolonged release of pDNA micelleplexes. Specifically, a thermogelling multiblock PU copolymer (denoted as EPH) was synthesized via the step-growth polymerization of poly(ethylene glycol), poly(propylene glycol), and poly(3-hydroxybutyrate). By further introducing a cationic extender, 3-(dimethylamino)-1,2-propanediol, into the reaction feed, a series of cationic PUs (denoted as EPHD) with varying compositions were obtained. The EPHDs formed positively charged micelles in aqueous solutions, efficiently condensed pDNA into nano-sized micelleplexes (<200 nm) at optimized w/w ratios, and mediated transient green fluorescence protein expression in HEK293T cells at 48 h post-transfection. On the other hand, aqueous EPH solution (4 wt %) was injectable at 4 °C and rapidly gelled upon heating to 37 °C to form a stable hydrogel depot. EPHD/pDNA micelleplexes were easily loaded into EPH by mixing the solutions at 4 °C, before heating to 37 °C, leading to the resultant hydrogel system. The in vitro release study revealed that while free pDNA loaded in the thermogel was completely released in 2 weeks, the release of EPHD/pDNA micelleplexes was prolonged to at least 28 days, suggesting substantial micelleplex-hydrogel interactions. Intact, bioactive, and noncytotoxic EPHD/pDNA micelleplexes in the release media were proved by gel retardation, in vitro gene transfection, and CCK-8 cytotoxicity assay results, respectively. Collectively, this work presents a simple approach to achieving and optimizing a novel two-in-one nanoparticle-hydrogel system for the prolonged delivery of pDNA and may be promising for long-term gene delivery applications.

Structure-Based Varieties of Polymeric Nanocarriers and Influences of Their Physicochemical Properties on Drug Delivery Profiles

Carriers are equally important as drugs. They can substantially improve bioavailability of cargos and safeguard healthy cells from toxic effects of certain therapeutics. Recently, polymeric nanocarriers (PNCs) have achieved significant success in delivering drugs not only to cells but also to subcellular organelles. Variety of natural sources, availability of different synthetic routes, versatile molecular architectures, exploitable physicochemical properties, biocompatibility, and biodegradability have presented polymers as one of the most desired materials for nanocarrier design. Recent innovative concepts and advances in PNC-associated nanotechnology are providing unprecedented opportunities to engineer nanocarriers and their functions. The efficiency of therapeutic loading has got considerably increased. Structural design-based varieties of PNCs are widely employed for the delivery of small therapeutic molecules to genes, and proteins. PNCs have gained ever-increasing attention and certainly paves the way to develop advanced nanomedicines. This article presents a comprehensive investigation of structural design-based varieties of PNCs and the influences of their physicochemical properties on drug delivery profiles with perspectives highlighting the inevitability of incorporating both the multi-stimuli-responsive and multi-drug delivery properties in a single carrier to design intelligent PNCs as new and emerging research directions in this rapidly developing area.

Anti-MicroRNA-21 Oligonucleotide Loaded Spermine-Modified Acetalated Dextran Nanoparticles for B1 Receptor-Targeted Gene Therapy and Antiangiogenesis Therapy

The use of nanoparticles (NPs) to deliver small inhibiting microRNAs (miRNAs) has shown great promise for treating cancer. However, constructing a miRNA delivery system that targets brain cancers, such as glioblastoma multiforme (GBM), remains technically challenging due to the existence of the blood-tumor barrier (BTB). In this work, a novel targeted antisense miRNA-21 oligonucleotide (ATMO-21) delivery system is developed for GBM treatment. Bradykinin ligand agonist-decorated spermine-modified acetalated dextran NPs (SpAcDex NPs) could temporarily open the BTB by activating G-protein-coupled receptors that are expressed in tumor blood vessels and tumor cells, which increase transportation to and accumulation in tumor sites. ATMO-21 achieves high loading in the SpAcDex NPs (over 90%) and undergoes gradual controlled release with the degradation of the NPs in acidic lysosomal compartments. This allows for cell apoptosis and inhibition of the expression of vascular endothelial growth factor by downregulating hypoxia-inducible factor (HIF-1α) protein. An in vivo orthotopic U87MG glioma model confirms that the released ATMO-21 shows significant therapeutic efficacy in inhibiting tumor growth and angiogenesis, demonstrating that agonist-modified SpAcDex NPs represent a promising strategy for GBM treatment combining targeted gene therapy and antiangiogenic therapy.

Polyelectrolyte Multilayered Capsules as Biomedical Tools

Polyelectrolyte multilayered capsules (PEMUCs) obtained using the Layer-by-Layer (LbL) method have become powerful tools for different biomedical applications, which include drug delivery, theranosis or biosensing. However, the exploitation of PEMUCs in the biomedical field requires a deep understanding of the most fundamental bases underlying their assembly processes, and the control of their properties to fabricate novel materials with optimized ability for specific targeting and therapeutic capacity. This review presents an updated perspective on the multiple avenues opened for the application of PEMUCs to the biomedical field, aiming to highlight some of the most important advantages offered by the LbL method for the fabrication of platforms for their use in the detection and treatment of different diseases.

Nanoparticular CpG-adjuvanted SARS-CoV-2 S1 protein elicits broadly neutralizing and Th1-biased immunoreactivity in mice

The spike (S) protein is a leading vaccine candidate against SARS-CoV-2 infection. The S1 domain of S protein, which contains a critical receptor-binding domain (RBD) antigen, potentially induces protective immunoreactivities against SARS-CoV-2. In this study, we presented preclinical evaluations of a novel insect cell-derived SARS-CoV-2 recombinant S1 (rS1) protein as a potent COVID-19 vaccine candidate. The native antigenicity of rS1 was characterized by enzyme-linked immunosorbent assay with a neutralizing monoclonal antibody targeting the RBD antigen. To improve its immunogenicity, rS1-adjuvanted with fucoidan/trimethylchitosan nanoparticles (FUC-TMC NPs) and cytosine-phosphate-guanosine-oligodeoxynucleotides (CpG-ODNs) were investigated using a mouse model. The S1-specific immunoglobulin G (IgG) titers, FluoroSpot assay, pseudovirus- and prototype SARS-CoV-2-based neutralization assays were assessed. The results showed that the rS1/CpG/ FUC-TMC NPs (rS1/CpG/NPs) formulation induced a broad-spectrum IgG response with potent, long-lasting, and cross-protective neutralizing activity against the emerging SARS-CoV-2 variant of concern, along with a Th1-biased cellular response. Thus, the rS1/CpG/NPs formulation presents a promising vaccination approach against COVID-19.

Biopolymer-based Carriers for DNA Vaccine Design

Over the last 30 years, genetically engineered DNA has been tested as novel vaccination strategy against various diseases, including human immunodeficiency virus (HIV), hepatitis B, several parasites, and cancers. However, the clinical breakthrough of the technique is confined by the low transfection efficacy and immunogenicity of the employed vaccines. Therefore, carrier materials were designed to prevent the rapid degradation and systemic clearance of DNA in the body. In this context, biopolymers are a particularly promising DNA vaccine carrier platform due to their beneficial biochemical and physical characteristics, including biocompatibility, stability, and low toxicity. This article reviews the applications, fabrication, and modification of biopolymers as carrier medium for genetic vaccines.

Sendai virus-based immunoadjuvant in hydrogel vaccine intensity-modulated dendritic cells activation for suppressing tumorigenesis

The conventional immunoadjuvants in vaccine have weak effect on stimulating antigen presentation and activating anti-tumor immunity. Unexpectedly, we discovered that non-pathogenic Sendai virus (SeV) could activate antigen-presenting cells (APCs) represented by dendritic cells (DCs). Here, we designed an injectable SeV-based hydrogel vaccine (SHV) to execute multi-channel recruitment and stimulation of DCs for boosting the specific immune response against tumors. After the release of the NIR-triggered antigens from tumor cells, dendritic cells around the vaccine efficiently transport the antigens to lymph nodes and present them to T lymphocytes, thereby inducing systemic anti-tumor immune memory. Our findings demonstrated that the SHV with excellent universality, convenience and flexibility has achieved better immune protection effects in inhibiting the occurrence of melanoma and breast cancer. In conclusion, the SHV system might serve as the next generation of personalized anti-tumor vaccines with enhanced features over standard vaccination regimens, and represented an alternative way to suppress tumorigenesis.

•

SeV served as immuneadjuvant can activate APCs through TLR7/8 and TLR3 pathways.

•

Non-pathogenic SeV in the injectable hydrogel vaccine recruit and activate DCs.

•

Tumor cells acted as an “antigen library” to release all antigens by NIR-trigger.

•

Fragmented DNA from tumor cells after photothermal damage activated STING pathway.

•

The synergy effect of SHV and aOX40 greatly enhanced anti-tumor immune memory.

Engineered drug delivery devices to address Global Health challenges

There is a dire need for innovative solutions to address global health needs. Polymeric systems have been shown to provide substantial benefit to all sectors of healthcare, especially for their ability to extend and control drug delivery. Herein, we review polymeric drug delivery devices for vaccines, tuberculosis, and contraception.

Enhanced immunogenicity of foot and mouth disease DNA vaccine delivered by PLGA nanoparticles combined with cytokine adjuvants

Although the immunogenicity of DNA vaccines is nonideal, they are still considered as potential alternative vaccine candidates to conventional vaccines. Various DNA delivery systems, including nanoparticles, have been extensively explored and validated to further enhance the immunogenicity of DNA vaccines. DNA vaccines are considered as alternative vaccine candidates. Various DNA delivery systems, including nanoparticles, have been extensively explored to enhance the immunogenicity of DNA vaccines. In this study, positively charged Poly (D, l-lactide-co-glycolic acid) (PLGA) nanoparticles were generated and characterized as a delivery system for O-serotype foot-and-mouth DNA vaccine. A recombinant plasmid encoding swine interleukin (IL)-18, IL-2, or granulocyte-macrophage colony-stimulating factor (GM-CSF) gene was introduced into the DNA vaccine to further improve its immunogenicity, which was evaluated in a guinea pig model. PLGA-pVAX-VP013/IL-18 elicited significantly (P = 0.0149) higher FMDV-specific antibody levels than naked DNA before the challenge. The level of neutralizing antibodies induced by PLGA-pVAX-VP013/IL-18, PLGA-pVAX-VP013/IL-2, and PLGA-pVAX-VP013/GM-CSF significantly increased compared with that induced by naked DNA (P < 0.0001). The lymphocyte proliferation assay showed that cellular immunity induced by PLGA-pVAX-VP013/IL-18 and PLGA-pVAX-VP013/GM-CSF was dramatically enhanced compared with that induced by the inactivated vaccine. The protection by PLGA-pVAX-VP013/IL-18 was consistent with that by the inactivated vaccine post-challenge and was followed by PLGA-pVAX-VP013/GM-CSF. Therefore, cationic PLGA nanoparticles can deliver DNA vaccines and induce humoral and cellular immune responses. The co-administration of FMD DNA vaccine with IL-18 formulated with PLGA nanoparticles was the optimal strategy to improve the immunogenicity of FMD DNA vaccines.

High-Throughput Automation of Endosomolytic Polymers for mRNA Delivery

In recent years, there has been an increasing interest in designing delivery systems to enhance the efficacy of RNA-based therapeutics. Here, we have synthesized copolymers comprised of dimethylaminoethyl methacrylate (DMAEMA) or diethylaminoethyl methacrylate (DEAEMA) copolymerized with alkyl methacrylate monomers ranging from 2 to 12 carbons, and developed a high throughput workflow for rapid investigation of their applicability for mRNA delivery. The structure activity relationship revealed that the mRNA encapsulation efficiency is improved by increasing the cationic density and use of shorter alkyl side chains (2-6 carbons). Minimal cytotoxicity was observed when using DEAEMA-co-BMA (EB) polyplexes up to 18 h after dosing, independent of a poly(ethylene glycol) (PEG) first block. The lowest molecular weight polymer (EB10,250) performed best, exhibiting greater transfection than polyethyenimine (PEI) based upon the number of cells transfected and mean intensity. Conventional investigations into the performance of polymeric materials for mRNA delivery is quite tedious, consequently limiting the number of materials and formulation conditions that can be studied. The high throughput approach presented here can accelerate the screening of polymeric systems and paves the way for expanding this generalizable approach to assess various materials for mRNA delivery.

Harnessing biomaterials for therapeutic strategies against COVID-19

With the emergence of the coronavirus disease 2019 (COVID-19), the world is experiencing a profound human health crisis. The number of infections and deaths due to the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) continues to increase every minute, pinpointing major shortcomings in our ability to prevent viral outbreaks. Although several COVID-19 vaccines have been recently approved for emergency use, therapeutic options remain limited, and their long-term potency has yet to be validated. Biomaterials science has a pivotal role to play in pushing the boundaries of emerging technologies for antiviral research and treatment. In this perspective, we discuss how biomaterials can be harnessed to develop accurate COVID-19 infection models, enhance antiviral drug delivery, foster new antiviral strategies, and boost vaccine efficacy. These efforts will not only contribute to stop or mitigate the current pandemic but will also provide unorthodox platforms to understand, prevent, and protect us from future viral outbreaks.

Enzymatic Noncovalent Synthesis for Mitochondrial Genetic Engineering of Cancer Cells

Since mitochondria contribute to tumorigenesis and drug resistance in cancer, mitochondrial genetic engineering promises a new direction for cancer therapy. Here, we report the use of the perimitochondrial enzymatic noncovalent synthesis (ENS) of peptides for delivering genes selectively into the mitochondria of cancer cells for mitochondrial genetic engineering. Specifically, the micelles of peptides bind to the voltage-dependent anion channel (VDAC) on mitochondria for the proteolysis by enterokinase (ENTK), generating perimitochondrial nanofibers in cancer cells. This process, facilitating selective delivery of nucleic acid or gene vectors into mitochondria of cancer cells, enables the mitochondrial transgene expression of CRISPR/Cas9, FUNDC1, p53, and fluorescent proteins. Mechanistic investigation indicates that the interaction of the peptide assemblies with the VDAC and mitochondrial membrane potential are necessary for mitochondria targeting. This local enzymatic control of intermolecular noncovalent interactions enables selective mitochondrial genetic engineering, thus providing a strategy for targeting cancer cells.

A novel liposome-polymer hybrid nanoparticles delivering a multi-epitope self-replication DNA vaccine and its preliminary immune evaluation in experimental animals

DNA vaccine is an attractive immune platform for the prevention and treatment of infectious diseases, but existing disadvantages limit its use in preclinical and clinical assays, such as weak immunogenicity and short half-life. Here, we reported a novel liposome-polymer hybrid nanoparticles (pSFV-MEG/LNPs) consisting of a biodegradable core (mPEG-PLGA) and a hydrophilic shell (lecithin/PEG-DSPE-Mal 2000) for delivering a multi-epitope self-replication DNA vaccine (pSFV-MEG). The pSFV-MEG/LNPs with optimal particle size (161.61 ± 15.63 nm) and high encapsulation efficiency (87.60 ± 8.73%) induced a strong humoral (3.22-fold) and cellular immune responses (1.60-fold) compared to PBS. Besides, the humoral and cellular immune responses of pSFV-MEG/LNPs were 1.58- and 1.05-fold than that of pSFV-MEG. All results confirmed that LNPs was a very promising tool to enhance the humoral and cellular immune responses of pSFV-MEG. In addition, the rational design and delivery platform can be used for the development of DNA vaccines for other infectious diseases.

A materials-science perspective on tackling COVID-19

The ongoing SARS-CoV-2 pandemic highlights the importance of materials science in providing tools and technologies for antiviral research and treatment development. In this Review, we discuss previous efforts in materials science in developing imaging systems and microfluidic devices for the in-depth and real-time investigation of viral structures and transmission, as well as material platforms for the detection of viruses and the delivery of antiviral drugs and vaccines. We highlight the contribution of materials science to the manufacturing of personal protective equipment and to the design of simple, accurate and low-cost virus-detection devices. We then investigate future possibilities of materials science in antiviral research and treatment development, examining the role of materials in antiviral-drug design, including the importance of synthetic material platforms for organoids and organs-on-a-chip, in drug delivery and vaccination, and for the production of medical equipment. Materials-science-based technologies not only contribute to the ongoing SARS-CoV-2 research efforts but can also provide platforms and tools for the understanding, protection, detection and treatment of future viral diseases.

Preparation and Characterization of A Nanoliposomal Vaccine of pcLACK Candidate Against Cutaneous Leishmaniasis

BACKGROUND

Leishmaniasis is a public health problem and endemic in countries of the tropics and subtropics. An ongoing project with naked LACK (Leishmania homolog of receptors for activated C-kinase) demonstrated that this case of the gene is entirely susceptible to immune response and it does enter the cells effectively. This study aimed at developing a procedure to prepare a type of lipid nanoparticles overloaded with plasmid LACK (pcLACK) for usage as Leishmania major (L. major) nanoliposomal vaccine.

MATERIALS AND METHODS

The single-gene expression plasmid of pcLACK was encoded in the LACK antigen. Nanoparticles were set up by thin film procedure using cationic lipids 1, 2-Dioleoyl- 3-Trimethylammonium propane (DOTAP), 1, 2-Dioleoyl-snGlycero-3-Phosphoethanolamine (DOPE), and cholesterol in a molar proportion of 2:1:1 molar ratio. Using dynamic light scattering, the particle diameters of empty and loaded lipoplexes were measured in triplicate. The zeta-potential (ζ) was measured with the same instrument using the zeta potential mode as the average of 20 measurements by diluting the particles into a low salt buffer.

RESULTS

The results of the sustainability studies of Liposome-pcLACK formulation showed that there were no significant physical changes up to the 30th day of stability study at the storage condition of 4°C. However, there were significant changes in the formulation content during storage at 25°C for 30 days (204.2±0.90 at Day 30 compared with 207.2±0.26 nm at Day 0). It was observed that the prepared nanoliposomal formulation had more stability under refrigeration.

CONCLUSION

Immunostimulatory cationic lipids bearing a pcLACK encapsulation could serve as an effective delivery system.

Water-Soluble and Cytocompatible Phospholipid Polymers for Molecular Complexation to Enhance Biomolecule Transportation to Cells in Vitro

Water-soluble and cytocompatible polymers were investigated to enhance a transporting efficiency of biomolecules into cells in vitro. The polymers composed of a 2-methacryloyloxyethyl phosphorylcholine (MPC) unit, a hydrophobic monomer unit, and a cationic monomer unit bearing an amino group were synthesized for complexation with model biomolecules, siRNA. The cationic MPC polymer was shown to interact with both siRNA and the cell membrane and was successively transported siRNA into cells. When introducing 20–50 mol% hydrophobic units into the cationic MPC polymer, transport of siRNA into cells. The MPC units (10–20 mol%) in the cationic MPC polymer were able to impart cytocompatibility, while maintaining interaction with siRNA and the cell membrane. The level of gene suppression of the siRNA/MPC polymer complex was evaluated in vitro and it was as the same level as that of a conventional siRNA transfection reagent, whereas its cytotoxicity was significantly lower. We concluded that these cytocompatible MPC polymers may be promising complexation reagent for introducing biomolecules into cells, with the potential to contribute to future fields of biotechnology, such as in vitro evaluation of gene functionality, and the production of engineered cells with biological functions.

An effective vaginal gel to deliver CRISPR/Cas9 system encapsulated in poly (β-amino ester) nanoparticles for vaginal gene therapy

BACKGROUND

Gene therapy has held promises for treating specific genetic diseases. However, the key to clinical application depends on effective gene delivery.

METHODS

Using a large animal model, we developed two pharmaceutical formulations for gene delivery in the pigs' vagina, which were made up of poly (β-amino ester) (PBAE)-plasmid polyplex nanoparticles (NPs) based two gel materials, modified montmorillonite (mMMT) and hectorite (HTT).

FINDINGS

By conducting flow cytometry of the cervical cells, we found that PBAE-GFP-NPs-mMMT gel was more efficient than PBAE-GFP-NPs-HTT gel in delivering exogenous DNA intravaginally. Next, we designed specific CRISPR/SpCas9 sgRNAs targeting porcine endogenous retroviruses (PERVs) and evaluated the genome editing efficacy in vivo. We discovered that PERV copy number in vaginal epithelium could be significantly reduced by the local delivery of the PBAE-SpCas9/sgRNA NPs-mMMT gel. Comparable genome editing results were also obtained by high-fidelity version of SpCas9, SpCas9-HF1 and eSpCas9, in the mMMT gel. Further, we confirmed that the expression of topically delivered SpCas9 was limited to the vagina/cervix and did not diffuse to nearby organs, which was relatively safe with low toxicity.

INTERPRETATION

Our data suggested that the PBAE-NPs mMMT vaginal gel is an effective preparation for local gene therapy, yielding insights into novel therapeutic approaches to sexually transmitted disease in the genital tract.

FUNDING

This work was supported by the National Science and Technology Major Project of the Ministry of science and technology of China (No. 2018ZX10301402); the National Natural Science Foundation of China (81761148025, 81871473 and 81402158); Guangzhou Science and Technology Programme (No. 201704020093); National Ten Thousand Plan-Young Top Talents of China, Fundamental Research Funds for the Central Universities (17ykzd15 and 19ykyjs07); Three Big Constructions-Supercomputing Application Cultivation Projects sponsored by National Supercomputer Center In Guangzhou; the National Research FFoundation (NRF) South Africa under BRICS Multilateral Joint Call for Proposals; grant 17-54-80078 from the Russian Foundation for Basic Research.

Investigating the Impact of Delivery System Design on the Efficacy of Self-Amplifying RNA Vaccines

messenger RNA (mRNA)-based vaccines combine the positive attributes of both live-attenuated and subunit vaccines. In order for these to be applied for clinical use, they require to be formulated with delivery systems. However, there are limited in vivo studies which compare different delivery platforms. Therefore, we have compared four different cationic platforms: (1) liposomes, (2) solid lipid nanoparticles (SLNs), (3) polymeric nanoparticles (NPs) and (4) emulsions, to deliver a self-amplifying mRNA (SAM) vaccine. All formulations contained either the non-ionizable cationic lipid 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) or dimethyldioctadecylammonium bromide (DDA) and they were characterized in terms of physico-chemical attributes, in vitro transfection efficiency and in vivo vaccine potency. Our results showed that SAM encapsulating DOTAP polymeric nanoparticles, DOTAP liposomes and DDA liposomes induced the highest antigen expression in vitro and, from these, DOTAP polymeric nanoparticles were the most potent in triggering humoral and cellular immunity among candidates in vivo.

Nano-vesicles based on phospholipid-like amphiphilic polyphosphazenes to orally deliver ovalbumin antigen for evoking anti-tumor immune response

Aimed at evoking an adequate anti-tumor immune response via oral administration route, this study constructed functionally and structurally mimicking-bacteria-membrane (MBM) nano-vesicle (RGD-PEOP) to orally deliver ovalbumin (OVA) antigen. In terms of simulating bacterial membrane structure, we creatively designed this nano-vesicle to have phospholipid-like octadecylphosphoethanolamine groups in vesicle membrane to improve OVA loading by means of specific interactions including salt bridge and hydrogen bond interaction. For simulating bacterial membrane function, the RGD peptide was modified onto the nano-vesicle surface, and the resulting vector displayed a good transport ability with a 3.4-fold higher than free OVA. In vitro and in vivo assay showed that the expression of co-stimulatory molecules and MHC class II complexes was significantly enhanced by MBM nano-vesicle. IFN-γ and IL-4 levels also increased several folds in the MBM nano-vesicle group. Consequently, MBM nano-vesicle achieved the highest in vivo inhibition rate of 69% against E.G7-OVA tumors among all the oral groups. These results suggest that this MBM nano-vesicle may be a promising vector to orally deliver OVA antigen for cancer immunotherapy. STATEMENT OF SIGNIFICANCE: Developing an effective non-bacterial carrier for oral cancer immunotherapy remains challenging. This work constructed a mimicking-bacteria-membrane nano-vesicle based on phospholipid-like amphiphilic polyphosphazenes for oral delivery of ovalbumin antigen. With the considerable capability to load ovalbumin antigen and target M cells, the nano-vesicle produced remarkable tumor suppression in vivo by evoking anti-tumor immune response.

Dynamic Covalent Polymers for Biomedical Applications

The rapid development of supramolecular polymer chemistry and constitutional dynamic chemistry over the last decades has made tremendous impact on the emergence of dynamic covalent polymers. These materials are formed through reversible covalent bonds, endowing them with adaptive and responsive features that have resulted in high interest throughout the community. Owing to their intriguing properties, such as self-healing, shape-memory effects, recyclability, degradability, stimuli-responsiveness, etc., the materials have found multiple uses in a wide range of areas. Of special interest is their increasing use for biomedical applications, and many examples have been demonstrated in recent years. These materials have thus been used for the recognition and sensing of biologically active compounds, for the modulation of enzyme activity, for gene delivery, and as materials for cell culture, delivery, and wound-dressing. In this review, some of these endeavors are discussed, highlighting the many advantages and unique properties of dynamic covalent polymers for use in biology and biomedicine.

Specific Inhibition of Viral MicroRNAs by Carbon Dots-Mediated Delivery of Locked Nucleic Acids for Therapy of Virus-Induced Cancer

Viruses are associated with up to 15% of human cancer. MicroRNAs (miRNAs) encoded by numerous oncogenic viruses including Kaposi's sarcoma-associated herpesvirus (KSHV) play significant roles in regulating the proliferation and survival of virus-induced cancer cells, hence representing attractive therapeutic targets. Here, we report that specific inhibition of viral miRNAs by carbon dots (Cdots)-mediated delivery of locked nucleic acid (LNA)-based suppressors inhibit the proliferation of KSHV-associated primary effusion lymphoma (PEL) cells. Specifically, a combination of Cdots-LNAs to knock down the levels of KSHV miR-K12-1, miR-K12-4, and miR-K12-11 induces apoptosis and inhibits proliferation of PEL cells. Significantly, these Cdots-LNAs effectively inhibit the initiation of PEL and regress established PEL in a xenograft mouse model. These results demonstrate the feasibility of using Cdots to deliver miRNA suppressors for targeting viral cancers. Our study with viral miRNAs as targets may provide the scientific basis for using antisense drugs for human cancers associated with oncogenic viruses.

Engineered Nanodelivery Systems to Improve DNA Vaccine Technologies

DNA vaccines offer a flexible and versatile platform to treat innumerable diseases due to the ease of manipulating vaccine targets simply by altering the gene sequences encoded in the plasmid DNA delivered. The DNA vaccines elicit potent humoral and cell-mediated responses and provide a promising method for treating rapidly mutating and evasive diseases such as cancer and human immunodeficiency viruses. Although this vaccine technology has been available for decades, there is no DNA vaccine that has been used in bed-side application to date. The main challenge that hinders the progress of DNA vaccines and limits their clinical application is the delivery hurdles to targeted immune cells, which obstructs the stimulation of robust antigen-specific immune responses in humans. In this updated review, we discuss various nanodelivery systems that improve DNA vaccine technologies to enhance the immunological response against target diseases. We also provide possible perspectives on how we can bring this exciting vaccine technology to bedside applications.

Lipid-based Liquid Crystalline Films and Solutions for the Delivery of Cargo to Cells

A major challenge in the delivery of cargo (genes and/or drugs) to cells using nanostructured vehicles is the ability to safely penetrate plasma membranes by escaping the endosome before degradation, later releasing the payload into the cytoplasm or organelle of interest. Lipids are a class of bio-compatible molecules that self-assemble into a variety of liquid crystalline constructs. Most of these materials can be used to encapsulate drugs, proteins, and nucleic acids to deliver them safely into various cell types. Lipid phases offer a plethora of structures capable of forming complexes with biomolecules, most notably nucleic acids. The physichochemical characteristics of the lipid molecular building blocks, one might say the lipid primary structure, dictates how they collectively interact to assemble into various secondary structures. These include bilayers, lamellar stacks of bilayers, two-dimensional (2D) hexagonal arrays of lipid tubes, and even 3D cubic constructs. The liquid crystalline materials can be present in the form of aqueous suspensions, bulk materials or confined to a film configuration depending on the intended application (e.g. bolus vs surface-based delivery). This work compiles recent findings of different lipid-based liquid crystalline constructs both in films and particles for gene and drug delivery applications. We explore how lipid primary and secondary structures endow liquid crystalline materials with the ability to carry biomolecular cargo and interact with cells.

Cationic polymer modified PLGA nanoparticles encapsulating Alhagi honey polysaccharides as a vaccine delivery system for ovalbumin to improve immune responses

Background: Poly (lactic-co-glycolic acid) (PLGA) nanoparticles and surface modified PLGA nanoparticles have been widely studied as antigens or drugs carriers due to their controlled release characteristics and biocompatibility. However, most PLGA nanoparticles have lower antigens loading efficiency and adjuvanticity.

Purpose: The aim of this study was to improve the antigen loading efficiency and adjuvant activity of PLGA nanoparticles.

Materials and methods: Surface cationic polymer modification can improve the antigens loading efficiency of PLGA nanoparticles by surface adsorption. Therefore, in this study, chitosan modified PLGA nanoparticles (CS-AHPP/OVA), polyethyleneimine modified PLGA nanoparticles (PEI-AHPP/OVA), and ε-Poly-L-lysine modified PLGA nanoparticles (εPL-AHPP/OVA) were prepared as antigen delivery carriers to investigate the characterization and stability of these nanoparticles. These nanoparticles were evaluated for their efficacies as adjuvants pre- and post-modification.

Results: The AHP and OVA-loaded PLGA nanoparticles (AHPP/OVA) were positively charged after surface cationic polymers modification, and their structural integrity was maintained. Their antigen loading capacity and stability of nanoparticles were improved by the surface cationic polymers modification. Increased positive surface charge resulted in greater OVA adsorption capacity. Among AHPP/OVA and the three surface cationic polymers synthesized from modified PLGA nanoparticles, PEI-AHPP/OVA showed the highest antigen loading efficiency and good stability. AHPP/OVA, CS-AHPP/OVA PEI-AHPP/OVA, and εPL-AHPP/OVA formulations significantly enhanced lymphocyte proliferation and improved the ratio of CD4+/CD8+ T cells. In addition, AHPP/OVA, PEI-AHPP/OVA and εPL-AHPP/OVA formulations induced secretion of cytokines (TNF-α, IFN-γ, IL-4, and IL-6), antibodies (IgG) and antibody subtypes (IgG1 and IgG2a) in immunized mice. These results demonstrate that these formulations generated a strong Th1-biased immune response. Among them, PEI-AHPP/OVA induced the strongest Th1-biased immune response.

Conclusion: In conclusion, PEI-AHPP/OVA nanoparticles may be a potential antigen delivery system for the induction of strong immune responses.

Engineering microenvironments towards harnessing pro-angiogenic potential of mesenchymal stem cells

Mesenchymal stem cell (MSC)-based therapy for promoting vascular regeneration is a promising strategy for treating ischemic diseases. However, low engraftment and retention rate of MSCs at the target site highlights the importance of paracrine signaling of MSCs in the reparative process. Thus, harnessing MSC-secretome is essential for rational design of MSC-based therapies. The role of microenvironment in regulating the paracrine signaling of MSCs is not well known. In this study, human bone marrow-derived MSCs were seeded on matrices with varying stiffness or cell adhesive sites, and conditioned media was collected. The concentrations of angiogenic molecules in the media was measured via ELISA. In addition, the bioactivity of the released molecules was investigated via assessing the proliferation and capillary morphogenesis of human umbilical vein endothelial cells (HUVECs) incubated with conditioned media. Our study revealed that secretion of vascular endothelial growth factor (VEGF) is dependent on substrate stiffness. Maximal secretion was observed when MSCs were seeded on hydrogel matrices of 5.0 kPa stiffness. Proliferation and tubulogenesis of HUVECs supported ELISA data. On the other hand, variation of cell adhesive sites while maintaining a uniform optimal stiffness, did not influence the pro-angiogenic activity of MSCs.

Enrichment of vascular endothelial growth factor secreting mesenchymal stromal cells enhances therapeutic angiogenesis in a mouse model of hind limb ischemia

Critical limb ischemia, a severe manifestation of peripheral artery disease, is emerging as a major concern in aging societies worldwide. Notably, cell-based gene therapy to induce angiogenesis in ischemic tissue has been investigated as treatment. Despite many studies demonstrating the efficacy of this approach, better therapies are required to prevent serious sequelae such as claudication, amputation and other cardiovascular events. We have now established a simplified method to enhance the effects of therapeutic transgenes by selecting for and transplanting only transduced cells. Herein, mesenchymal stromal cells were transfected to co-express vascular endothelial growth factor as angiogenic factor and enhanced green fluorescent protein as marker. Transfected cells were then collected using flow cytometry based on green fluorescence and transplanted into ischemic hind limbs in mice. Compared with unsorted or untransfected cells, purified cells significantly improved blood perfusion within 21days, suggesting that transplanting only cells that overexpress vascular endothelial growth factor enhances therapeutic angiogenesis. Importantly, this approach may prove to be useful in cell-based gene therapy against a wide spectrum of diseases, simply by replacing the gene to be delivered or the cell to be transplanted.

Design, Synthesis, and In Vitro Evaluation of Low Molecular Weight Protamine (LMWP)-Based Amphiphilic Conjugates as Gene Delivery Carriers

Development of efficient non-viral carriers is one of the major challenges of gene delivery. In the current study, we designed, synthesized, and evaluated the in vitro gene delivery efficiency of novel amphiphilic constructs composed of cholesterol and low molecular weight protamine (LMWP: VSRRRRRRGGRRRR) peptide. Vectors having both hydrophobic and hydrophilic moieties were evaluated in terms of particle size and charge, DNA condensation ability, cytotoxicity, and gene transfection efficiency. The prepared vectors spontaneity self-assembled into the liposome-like particles with a high local positive density. The nano-vehicle A (H5-LMWP-Cholestrol) and nano-vehicle B (LMWP-Cholesterol) could form micelles at concentrations above 50 μg/mL and 65 μg/mL, respectively. The gel retardation assay showed that nano-vehicles A and B could condense pDNA more efficiently than the corresponding unconjugated peptides. The mean of size and zeta potential of complexed nano-vehicle A at N/P ratios of 5, 15, and 30 were 151 nm and 23 mv, and those of nano-vehicle B were 224 nm and 19 mv, respectively. In terms of transfection efficiency, the designed nano-vehicles showed almost two-fold higher gene expression level compared to PEI 25 kDa at optimal N/P ratios, and also exhibited negligible cytotoxicity on a model cancer cell, Neuro 2a. The findings of the present study revealed that these cationic micelles can be promising candidates as non-viral gene delivery vehicles.

Engineering mannosylated nanogels with membrane-disrupting properties

In this work, mannosylated core-cross-linked nanogels are designed that contain cationic moieties in their core.

Structure-pDNA complexation and structure–cytotoxicity relationships of PEGylated, cationic aminoethyl-based polyacrylates with tunable topologies

The influence of PEGylation and topology on cationic aminoethyl-based polyacrylates has been highlighted on cell viability and pDNA complexation.

A multifunctional polymeric gene delivery system for circumventing biological barriers

Crucial light-controlled-ROS and pH-stimulus-responsive functionalities are tailored into a triblock copolymer for manufacture of gene delivery vehicles.

Encapsulation and Ultrasound-Triggered Release of G-Quadruplex DNA in Multilayer Hydrogel Microcapsules

Nucleic acid therapeutics have the potential to be the most effective disease treatment strategy due to their intrinsic precision and selectivity for coding highly specific biological processes. However, freely administered nucleic acids of any type are quickly destroyed or rendered inert by a host of defense mechanisms in the body. In this work, we address the challenge of using nucleic acids as drugs by preparing stimuli responsive poly(methacrylic acid)/poly(N-vinylpyrrolidone) (PMAA/PVPON)n multilayer hydrogel capsules loaded with ~7 kDa G-quadruplex DNA. The capsules are shown to release their DNA cargo on demand in response to both enzymatic and ultrasound (US)-triggered degradation. The unique structure adopted by the G-quadruplex is essential to its biological function and we show that the controlled release from the microcapsules preserves the basket conformation of the oligonucleotide used in our studies. We also show that the (PMAA/PVPON) multilayer hydrogel capsules can encapsulate and release ~450 kDa double stranded DNA. The encapsulation and release approaches for both oligonucleotides in multilayer hydrogel microcapsules developed here can be applied to create methodologies for new therapeutic strategies involving the controlled delivery of sensitive biomolecules. Our study provides a promising methodology for the design of effective carriers for DNA vaccines and medicines for a wide range of immunotherapies, cancer therapy and/or tissue regeneration therapies in the future.

pH-Sensitive Polymers as Dynamic Mediators of Barriers to Nucleic Acid Delivery

The nonviral delivery of exogenous nucleic acids (NA) into cells for therapeutic purposes has rapidly matured into tangible clinical impact. Synthetic polymers are particularly attractive vectors for NA delivery due to their relatively inexpensive production compared to viral alternatives and their highly tailorable chemical properties; indeed, many preclinical investigations have revealed the primary biological barriers to nonviral NA delivery by systematically varying polymeric material properties. This review focuses on applications of pH-sensitive chemistries that enable polymeric vectors to serially address multiple biological barriers to NA delivery. In particular, we focus on recent innovations with in vivo evaluation that dynamically enable colloidal stability, cellular uptake, endosomal escape, and nucleic acid release. We conclude with a summary of successes to date and projected areas for impactful future research.

Polycations for Gene Delivery: Dilemmas and Solutions

Gene therapy has been a promising strategy for treating numerous gene-associated human diseases by altering specific gene expressions in pathological cells. Application of nonviral gene delivery is hindered by various dilemmas encountered in systemic gene therapy. Therefore, solutions must be established to address the unique requirements of gene-based treatment of diseases. This review will particularly highlight the dilemmas in polycation-based gene therapy by systemic treatment. Several promising strategies, which are expected to overcome these challenges, will be briefly reviewed. This review will also explore the development of polycation-based gene delivery systems for clinical applications.