Photon Driven Transformation of Cesium Lead Halide Perovskites from Few-Monolayer Nanoplatelets to Bulk Phase

High-Security and High-Efficiency Information Encryption/Decryption Based on 2D Hybrid Organic-Inorganic Perovskites via Delicate Organic-Cation Engineering

Optical encryption based on stimuli-responsive luminescence (SRL) materials has received enormous interest in the field of information security. Metal-halide perovskites, as a newly emerging SRL material, have shown great potential for confidential information encryption/decryption (InfoED) applications. However, it is rather challenging to ensure high security and achieve high readout efficiency in perovskite SRL-based InfoED. Herein, we present a unique InfoED strategy using 2D hybrid organic-inorganic perovskites via delicate organic-cation engineering, benefiting from the high contrast and quick response of their photoluminescence behaviors. Indistinguishably encrypted information can be efficiently decrypted through triple-key implementation (i.e., ultraviolet-light irradiation, temperature control, and narrow-bandpass filtering) that operates in multiple switching modes, enabling us to demonstrate extremely high security by adopting dot-matrix patterning scenarios that are virtually uncrackable. As a proof of principle, a simple 2 × 2 patterning can yield a code dictionary with random variants as high as ∼1047, which will take as long as ∼1022 years to crack using the hitherto fastest supercomputer, El Capitan. Our perovskite SRL-based InfoED strategy provides a promising solution for information security based on optical encryption.

Oleylammonium fluoride passivated blue-emitting 2D CsPbBr3 nanoplates with near-unity photoluminescence quantum yield: safeguarding against threats from external perturbations

Quantum-confined, two-dimensional (2D) CsPbBr3 (CPB) nanoplates (NPLs) have emerged as exceptional candidates for next-generation blue LEDs and display technology applications. However, their large surface-to-volume ratio and detrimental bromide vacancies adversely affect their photoluminescence quantum yield (PLQY). Additionally, external perturbations such as heat, light exposure, moisture, oxygen, and solvent polarity accelerate their transformation into three-dimensional (3D), green-emitting CPB nanocrystals (NCs), thereby resulting in the loss of their quantum confinement. Until now, no reported strategies have successfully addressed all these issues simultaneously. In this study, for the first time, we prepared oleylammonium fluoride (OAmF) salt and applied it post-synthetically to CPB NPLs with thicknesses of n = 3 and n = 4. Steady state and time-resolved photoluminescence (TRPL) measurements like fluorescence upconversion and TCSPC confirmed the elimination of detrimental deep trap states by fluoride ions, resulting in an unprecedented improvement in PLQY to 85% for n = 3 and 98% for n = 4. Furthermore, the formation of robust Pb-F bonds, coupled with strong electrostatic and hydrogen-bonding interactions, resulted in a highly stable NPL surface-ligand interaction. This concrete surface architecture restricts the undesired phase transition of 2D NPLs into 3D NCs under various external perturbations, including heat up to 363 K, strong UV irradiation, water, atmospheric conditions, and solvent polarity. Also, the temperature dependent TRPL measurements provide an insight into the charge carrier dynamics under thermal stress conditions and reveal the location of shallow trap states, which lie below 7 meV from the conduction band edge. In brief, our innovative OAmF salt has effectively addressed all the critical issues of 2D CPB NPLs, paving the way for next-generation LED applications. This breakthrough not only enhances the stability and PLQY of CPB NPLs but also offers a scalable solution for the advancement of perovskite-based technologies.

Assembly-promoted repeatable enhancement of photoluminescence from cesium lead tribromide nanocubes under light illumination

A repeatable enhancement of the photoluminescence (PL) from CsPbBr3 nanocubes (NCs) is promoted by the assembling of NCs. The PL quantum yield (QY) of ordered NC arrays increases with photoirradiation and decreases in the dark. The repeatable enhancement of the PLQY cannot be observed from isolated NCs. The nanospaces between NCs in the ordered arrays allow a reversible change in thermally stimulated desorption and photo-induced adsorption of surface ligands that affect the PLQY.

Light-induced transformation of all-inorganic mixed-halide perovskite nanoplatelets: ion migration and coalescence

When exposed to light, the colloidal perovskite nanoplatelets (NPLs) in the film can fuse into larger grains, and this phenomenon was thought to be closely related to ion migration. However, the available CsPbBr3 NPLs are not conducive to directly distinguishing this hypothesis. Herein, we prepare mixed-halide perovskite CsPbBr2.7I0.3 NPLs by a ligand-assisted reprecipitation method and investigate the photoluminescence evolution of NPLs under laser irradiation. At a low-irradiation intensity, 4.5-monolayer NPLs exhibit blue-shifted photoluminescence peaks due to the migration of iodide ions. Under higher laser fluence, a new photoluminescence component appears in the long wavelength region after the spectral blue shift, which is attributed to the coalescence of NPLs according to transmission electron microscopy analysis. A similar spectral evolution is also observed in 8-monolayer NPLs, while only the spectral blue shift caused by ion migration is detected in cuboidal CsPbBr2.7I0.3 nanocrystals. The use of strong bonding ligands can inhibit the fusion process of the NPLs, but not to impede ion migration, suggesting that fusion requires ligand detachment rather than ion migration. Similar suppression effects can be achieved in a vacuum atmosphere. Moreover, we demonstrate that mixed-halide NPLs can be used to realize anti-counterfeiting applications with superior photosensitivity.

Efficient, Color-Stable, Pure-Blue Light-Emitting Diodes Based on Aromatic Ligand-Engineered Perovskite Nanoplatelets

Perovskite nanoplatelets (NPLs) show great potential for high-color-purity light-emitting diodes (LEDs) due to their narrow line width and high exciton binding energy. However, the performance of perovskite NPL LEDs lags far behind perovskite quantum dot-/film-based LEDs, owing to their material instability and poor carrier transport. Here, we achieved efficient and stable pure blue-emitting CsPbBr3 NPLs with outstanding optical and electrical properties by using an aromatic ligand, 4-bromothiophene-2-carboxaldehyde (BTC). The BTC ligands with thiophene groups can guide two-dimensional growth and inhibit out-of-plane ripening of CsPbBr3 NPLs, which, meanwhile, increases their structural stability via strongly interacting with PbBr64- octahedra. Moreover, aromatic structures with delocalized π-bonds facilitate charge transport, diminish band tail states, and suppress Auger processes in CsPbBr3 NPLs. Consequently, the LEDs demonstrate efficient and color-stable blue emissions at 465 nm with a narrow emission line width of 17 nm and a maximum external quantum efficiency (EQE) of 5.4%, representing the state-of-the-art CsPbBr3 NPL LEDs.

Kinetically Controlled Synthesis of Quasi-Square CsPbI3 Nanoplatelets with Excellent Stability

Nanoplatelets (NPLs) share excellent luminescent properties with their symmetric quantum dots counterparts and entail special characters benefiting from the shape, like the thickness-dependent bandgap and anisotropic luminescence. However, perovskite NPLs, especially those based on iodide, suffer from poor spectral and phase stability. Here, stable CsPbI3 NPLs obtained by accelerating the crystallization process in ambient-condition synthesis are reported. By this kinetic control, the rectangular NPLs into quasi-square NPLs are tuned, where enlarged width endows the NPLs with a lower surface-area-to-volume ratio (S/V ratio), leading to lower surficial energy and thus improved endurance against NPL fusion (cause for spectral shift or phase transformation). The accelerated crystallization, denoting the fast nucleation and short period of growth in this report, is enabled by preparing a precursor with complete transformation of PbI2 into intermediates (PbI3 -), through an additional iodide supplier (e.g., zinc iodide). The excellent color stability of the materials remains in the light-emitting diodes under various bias stresses.

Chemical Aspects of Halide Perovskite Nanocrystals

Halide perovskite nanocrystals (HPNCs) are currently among the most intensely investigated group of materials. Structurally related to the bulk halide perovskites (HPs), HPNCs are nanostructures with distinct chemical, optical, and electronic properties and significant practical potential. One of the keys to the effective exploitation of the HPNCs in advanced technologies is the development of controllable, reproducible, and scalable methods for preparation of materials with desired compositions, phases, and shapes and low defect content. Another important condition is a quantitative understanding of factors affecting the chemical stability and the optical and electronic properties of HPNCs. Here we review important recent developments in these areas. Following a brief historical prospective, we provide an overview of known chemical methods for preparation of HPNCs and approaches used to control their composition, phase, size, and shape. We then review studies of the relationship between the chemical composition and optical properties of HPNCs, degradation mechanisms, and effects of charge injection. Finally, we provide a short summary and an outlook. The aim of this review is not to provide a comprehensive summary of all relevant literature but rather a selection of highlights, which, in the subjective view of the authors, provide the most significant recent observations and relevant analyses.

Alkali-Metal-Assisted Green-Solvent Synthesis for In Situ Growth of Perovskite Nanocrystals in Porous Materials

Inorganic metal halide perovskite CsPbX3 (X = I, Br, and Cl) nanocrystals (NCs) are rapidly developed due to their excellent photophysical properties and potential applications in lighting, lasers, and scintillators. However, the materials for growing perovskite NCs are insoluble or hydrolyzed in most green solvents, limiting their further development. Based on rational chemical analysis, an alkali-metal-assisted green-solvent synthesis method for in situ growth of CsPbBr3 NCs within SAPO-34 zeolite with bright luminescence is developed. Water is the only solvent used in the whole process. Surprisingly, by the synergistic effect of the channel structure of SAPO-34 and alkali-metal ions crystallization regulation, the CsPbBr3 NCs embedded in SAPO-34 assisted by Na+ emit bright blue light under ultraviolet illumination, with a 30 nm blue shift comparing to the CsPbBr3 NCs assisted by K+. Moreover, CsPbBr3 NCs can also be grown in mesoporous SiO2 SBA-15 and zeolites including ZSM-5, AlPO-5, and SOD, indicating that the method is universal for in situ growth of luminescent perovskite NCs in porous materials. This alkali-metal-assisted green-solvent synthesis provides a new strategy for developing high-quantum-yield, tunable-emission, and stable perovskite luminescent materials.

Phase Control and Singlet Energy Transfer Enabled by Trimethylamine Modified Boron Dipyrromethene for Stable CsPbBr3 Quantum Wells

The phase distribution and organic spacer cations play pivotal roles in determining the emission performance and stability of perovskite quantum wells (QWs). Here, we propose a universal molecular regulation strategy to tailor phase distribution and enhance the stability of CsPbBr3 QWs. The capability of sterically hindered ligands with formidable surface binding groups is underscored in directing CsPbBr3 growth and refining phase distribution. With trimethylamine modified boron dipyrromethene (BDP-TMA) ligand as a representative, the BDP-TMA driven can precisely control phase distribution and passivate defects of CsPbBr3 . Notably, BDP-TMA acts as a co-spacer organic entity in obtained BDP-TMA-CsPbBr3 , facilitating efficient singlet energy transfer and tailoring the luminescence to produce a distinctive bluish-white emission. The BDP-TMA-CsPbBr3 demonstrates significant phase stability under water exposure, light irradiation, and moderate temperature. Interestingly, BDP-TMA-CsPbBr3 exhibits the thermally-induced dynamic fluorescence control at elevated temperatures, which can be achieved feasible for advanced information encryption. This discovery paves the way for the exploration of perovskite QWs in applications like temperature sensing, anti-counterfeiting, and other advanced optical smart technologies.

Energy transfer enhanced photoluminescence of 2D/3D CsPbBr3 hybrid assemblies

Energy transfer has been proven to be an effective method to optimize optoelectronic conversion efficiency by improving light absorption and mitigating nonradiative losses. We prepared 2D/3D CsPbBr3 hybrid assemblies at different reaction temperatures using the hot injection method and found that the photoluminescence quantum yields (PLQYs) of these hybrids were greatly enhanced from 53.4% to 72.57% compared with 3D nanocrystals (NCs). Femtosecond transient absorption measurements were used to study the PLQY enhancement mechanisms, and it was found that the hot carrier lifetime improved from 0.36 to 1.88 ps for 2D/3D CsPbBr3 hybrid assemblies owing to the energy transfer from 2D nanoplates to 3D NCs. The energy transfer benefits the excited carrier accumulation and prolonged hot carrier lifetime in 3D NCs in hybrid assemblies, as well as PLQY enhancement in materials.

Real-Time In Situ Observation of CsPbBr3 Perovskite Nanoplatelets Transforming into Nanosheets

The manipulation of nano-objects through heating is an effective strategy for inducing structural modifications and therefore changing the optoelectronic properties of semiconducting materials. Despite its potential, the underlying mechanism of the structural transformations remains elusive, largely due to the challenges associated with their in situ observations. To address these issues, we synthesize temperature-sensitive CsPbBr₃ perovskite nanoplatelets and investigate their structural evolution at the nanoscale using in situ heating transmission electron microscopy. We observe the morphological changes that start from the self-assembly of the nanoplatelets into ribbons on a substrate. We identify several paths of merging nanoplates within ribbons that ultimately lead to the formation of nanosheets dispersed randomly on the substrate. These observations are supported by molecular dynamics simulations. We correlate the various paths for merging to the random orientation of the initial ribbons along with the ligand mobility (especially from the edges of the nanoplatelets). This leads to the preferential growth of individual nanosheets and the merging of neighboring ones. These processes enable the creation of structures with tunable emission, ranging from blue to green, all from a single material. Our real-time observations of the transformation of perovskite 2D nanocrystals reveal a route to achieve large-area nanosheets by controlling the initial orientation of the self-assembled objects with potential for large-scale applications.

Anionic ligand-induced chirality in perovskite nanoplatelets

Perovskite materials passivated by chiral ligands have recently shown unique chiroptical activity with promising optoelectronic applications. However, the ligands have been limited to chiral amines. Here, chiral phosphate molecules have been exploited to synthesize CsPbBr₃ nanoplatelets. The nanoplatelets showed a distinct circular dichroism signal and maintained their chiroptical properties after purification with anti-solvent.

Colloidal Metal-Halide Perovskite Nanoplatelets: Thickness-Controlled Synthesis, Properties, and Application in Light-Emitting Diodes

Colloidal metal-halide perovskite nanocrystals (MHP NCs) are gaining significant attention for a wide range of optoelectronics applications owing to their exciting properties, such as defect tolerance, near-unity photoluminescence quantum yield, and tunable emission across the entire visible wavelength range. Although the optical properties of MHP NCs are easily tunable through their halide composition, they suffer from light-induced halide phase segregation that limits their use in devices. However, MHPs can be synthesized in the form of colloidal nanoplatelets (NPls) with monolayer (ML)-level thickness control, exhibiting strong quantum confinement effects, and thus enabling tunable emission across the entire visible wavelength range by controlling the thickness of bromide or iodide-based lead-halide perovskite NPls. In addition, the NPls exhibit narrow emission peaks, have high exciton binding energies, and a higher fraction of radiative recombination compared to their bulk counterparts, making them ideal candidates for applications in light-emitting diodes (LEDs). This review discusses the state-of-the-art in colloidal MHP NPls: synthetic routes, thickness-controlled synthesis of both organic-inorganic hybrid and all-inorganic MHP NPls, their linear and nonlinear optical properties (including charge-carrier dynamics), and their performance in LEDs. Furthermore, the challenges associated with their thickness-controlled synthesis, environmental and thermal stability, and their application in making efficient LEDs are discussed.

Laser-Induced Morphological and Structural Changes of Cesium Lead Bromide Nanocrystals

Metal halide perovskite nanocrystals, an emerging class of materials for advanced photonic and optoelectronic applications, are mainly fabricated with colloidal chemistry routes. On the quest for new properties according to application needs, new perovskite systems of various morphologies and levels of doping and alloying have been developed, often also involving post-synthesis reactions. Recently, laser irradiation in liquids has been utilized as a fast method to synthesize or transform materials and interesting laser-induced transformations on nanocrystals were induced. These studies in general have been limited to small nanocrystals (~15 nm). In the case of halide perovskites, fragmentation or anion exchange have been observed in such laser-based processes, but no crystal structure transformations were actually observed or deliberately studied. Nanocrystals are more sensitive to light exposure compared to the corresponding bulk crystals. Additional factors, such as size, morphology, the presence of impurities, and others, can intricately affect the photon absorption and heat dissipation in nanocrystal suspensions during laser irradiation. All these factors can play an important role in the final morphologies and in the time required for these transformations to unfold. In the present work, we have employed a 513 nm femtosecond (fs) laser to induce different transformations in large nanocrystals, in which two phases coexist in the same particle (Cs4PbBr6/CsPbBr3 nanohexagons of ~100 nm), dispersed in dichlorobenzene. These transformations include: (i) the exfoliation of the primary nanohexagons and partial anion exchange; (ii) fragmentation in smaller nanocubes and partial anion exchange; (iii) side-by-side-oriented attachment, fusion, and formation of nanoplatelets and complete anion exchange; (iv) side-by-side attachment, fusion, and formation of nanosheets. Partial or complete Br-Cl anion exchange in the above transformations was triggered by the partial degradation of dichlorobenzene. In addition to the detailed analysis of the various nanocrystal morphologies observed in the various transformations, the structure-photoluminescence relationships for the different samples were analyzed and discussed.

Facile synthesis of Mn2+ doped ultrathin (n=2) NPLs and their application to anti-counterfeiting

Ultrathin 2D perovskite nanoplatelets (NPLs) have many excellent optical properties including narrow absorption and emission spectra and large exciton binding energies. Doping Mn2+ into perovskite NPLs also introduces strong orange...

Poly acrylic acid-b-polystyrene -passivated CsPbBr3 perovskite quantum dots with high photoluminescence quantum yield for light-emitting diodes

We reported a novel strategy for the preparation of CsPbBr3 perovskite quantum dots by polyacrylic acid-b-polystyrene ligands, which exhibited high stability and photoluminescence quantum yields. The fabricated white light-emitting diodesexhibited...

Photoinduced quasi-2D to 3D phase transformation in hybrid halide perovskite nanoplatelets

We present a photo-induced quasi-2D to 3D phase transition of MAPbBr₃ (MA = CH₃NH₃) perovskite nanoplatelets (NPLs). To begin with, we synthesized quasi-2D MAPbBr₃ NPLs (two octahedral layers thick, n = 2). A systematic increase in the thickness of the perovskite platelets is observed as a result of continuous photon irradiation leading to a 78 nm red shift in the emission spectra through different stages. Moreover, the bandgap of the compound decreases from 2.72 eV to 2.2 eV as we move from a quasi-2D to 3D phase. The excitonic Bohr radius of the MAPbBr₃ NPLs is found to be 1.8 nm, whereas the thickness of a single layer of PbBr₆^4- octahedra is 5.9 Å. As the layer thickness increases (>4-6 layers), MAPbBr₃ NPLs move out of the quantum confinement regime, governed by the red shift in the emission spectra. To complement the experimental results, density functional theory calculations were performed on MAPbBr₃ of various layer thicknesses. The van der Waals interaction and a more accurate Heyd-Scuseria-Ernzerhof functional were used to calculate the optical bandgap for MAPbBr₃ platelets of different layer thicknesses, which matches exceptionally well with the experimental results. Our findings disclose an interesting and meaningful phenomenon in the emerging hybrid perovskite NPLs and are beneficial for any future development of perovskite-based devices.

All-inorganic perovskite quantum dots-based electrospun polyacrylonitrile fiber for ultra-sensitive trace-recording

All-inorganic dual-phase CsPbBr₃-Cs₄PbBr₆quantum dots (CPB QDs)-based polyacrylonitrile (PAN) fiber synthesized by supersaturated recrystallization and electrospinning technique possesses characteristics of homogeneous morphology, high crystallinity and solution sensitivity. Under 365 nm laser excitation, CPB@PAN fiber exhibits surprising trace-recording capability attributing to the splash-enhanced fluorescence (FL) performance with a narrow-band emission at 477-515 nm. In the process of ethanol anhydrous (EA) and water splashing, the CPB@PAN fiber presents conspicuous blue and green emission when contacting with EA and water, and maintains intense blue and green FL for more than 4 months. These experimental and theoretical findings provide a facile technology for the development of biological protection display, biotic detection and moisture-proof forewarning based on the trace-recording performance of CPB@PAN fiber.

Quasi-Type II Core-Shell Perovskite Nanocrystals for Improved Structural Stability and Optical Gain

In recent years, core-shell lead halide perovskite nanocrystals (PeNCs) and their devices have attracted intensive attention owing to nearly perfect optoelectronic properties. However, the complex photophysical mechanism among them is still unclear. Herein, monodispersed core-shell PeNCs coated with an all-inorganic cesium lead bromide (CsPbBr₃) shell epitaxially grown on the surface of formamidinium lead bromide (FAPbBr₃) PeNCs were synthesized. Through power- and temperature-dependent photoluminescence (PL) measurements, it is found that the electronic structure of the core-shell FAPbBr₃/CsPbBr₃ PeNCs has a quasi-type II band alignment. The presence of Cs⁺ in the shell limits ion migration and helps to stabilize structural and optical properties. On this basis, after being exposed to pulsed nanosecond laser for a period, an amplified spontaneous emission (ASE) can be observed, which is attributed to the effective passivation induced by laser irradiation on defects at the interface. The ASE threshold of the core-shell PeNCs showing high structural and optical stability is 447 nJ/cm² under pulsed nanosecond optical pumping. The results that are demonstrated here provide a new idea and perspective for improving the stability of perovskite and can be of practical interest for the utilization of the core-shell PeNCs in optoelectronic devices.

Enhancing the stability of CsPbX3 (X = Br, I) through combination with Y-zeolites for WLED application

The stability of perovskite quantum dots (PQDs) plays a vital role in practical devices. Besides silica coating, embedding PQDs in zeolites is another strategy to improve their stability significantly. Although the zeolite rigid framework has been reported to protect PQDs, there are few reports on the in situ synthesis of PQDs in zeolites. In this work, cubic phase CsPbX₃ (X = Br, I) nanocrystals were successfully prepared by the ion exchange method combined with a non-polar organic trigger. Dropping a certain amount of ZnM₂ (M = Br, I) solution into the intermediate product Cs₄PbCl₆ nanocrystals resulted in the formation of the final CsPbX₃ nanocrystals. The ZnM₂ solutions were prepared in non-polar solvents (hexane, octane, or chloroform). The highest photoluminescence quantum yield (PLQY) of the synthesized CsPbX₃@zeolite composites can reach 83%, with a lifetime of 1.37 μs. The stability of the CsPbX₃@zeolite composites thin film against damage from air and light is significantly improved. We fabricated white light-emitting diodes (WLEDs) using CsPbBr₃@zeolite as the green light source and CsPbI₃@zeolite as the red light source to further emphasize the practical application effect of the CsPbX₃@zeolite composites. This work not only provides a new method for the synthesis of CsPbX₃ nanocrystals but also involves the in situ synthesis of high stability CsPbX₃@zeolite composites within the zeolite.

Stable and Efficient Blue-Emitting CsPbBr3 Nanoplatelets with Potassium Bromide Surface Passivation

Colloidal all-inorganic perovskites nanocrystals (NCs) have emerged as a promising material for display and lighting due to their excellent optical properties. However, blue emissive NCs usually suffer from low photoluminescence quantum yields (PLQYs) and poor stability, rendering them the bottleneck for full-color all-perovskite optoelectronic applications. Herein, a facile approach is reported to enhance the emission efficiency and stability of blue emissive perovskite nano-structures via surface passivation with potassium bromide. By adding potassium oleate and excess PbBr₂ to the perovskite precursor solutions, potassium bromide-passivated (KBr-passivated) blue-emitting (≈450 nm) CsPbBr₃ nanoplatelets (NPLs) is successfully synthesized with a respectably high PLQY of 87%. In sharp contrast to most reported perovskite NPLs, no shifting in emission wavelength is observed in these passivated NPLs even after prolonged exposures to intense irradiations and elevated temperature, clearly revealing their excellent photo- and thermal-stabilities. The enhancements are attributed to the formation of K-Br bonding on the surface which suppresses ion migration and formation of Br-vacancies, thus improving both the PL emission and stability of CsPbBr₃ NPLs. Furthermore, all-perovskite white light-emitting diodes (WLEDs) are successfully constructed, suggesting that the proposed KBr-passivated strategy can promote the development of the perovskite family for a wider range of optoelectronic applications.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Oriented Halide Perovskite Nanostructures and Thin Films for Optoelectronics

Oriented semiconductor nanostructures and thin films exhibit many advantageous properties, such as directional exciton transport, efficient charge transfer and separation, and optical anisotropy, and hence these nanostructures are highly promising for use in optoelectronics and photonics. The controlled growth of these structures can facilitate device integration to improve optoelectronic performance and benefit in-depth fundamental studies of the physical properties of these materials. Halide perovskites have emerged as a new family of promising and cost-effective semiconductor materials for next-generation high-power conversion efficiency photovoltaics and for versatile high-performance optoelectronics, such as light-emitting diodes, lasers, photodetectors, and high-energy radiation imaging and detectors. In this Review, we summarize the advances in the fabrication of halide perovskite nanostructures and thin films with controlled dimensionality and crystallographic orientation, along with their applications and performance characteristics in optoelectronics. We examine the growth methods, mechanisms, and fabrication strategies for several technologically relevant structures, including nanowires, nanoplates, nanostructure arrays, single-crystal thin films, and highly oriented thin films. We highlight and discuss the advantageous photophysical properties and remarkable performance characteristics of oriented nanostructures and thin films for optoelectronics. Finally, we survey the remaining challenges and provide a perspective regarding the opportunities for further progress in this field.

Morphology-Dependent Ambient-Condition Growth of Perovskite Nanocrystals for Enhanced Stability in Photoconversion Device

CsPbBr₃ perovskite nanocrystals with two different dimensionalities were synthesized at different temperatures and then integrated as optoelectronic transducers into transistor-type photoconversion devices. Postsynthesis transformation was observed for two-dimensional (2D) nanoplatelets, while the transformation was rarely found in 3D nanocubes. At ambient temperature and pressure, neighboring nanoplatelets made facet-to-facet contact and then fused into larger 2D nanoplatelets (2-5 times) without defects. The coalescence of 2D nanoplatelets at the ambient condition lowered the density of defects at the surface of the nanocrystals and thus could facilitate effective and stable photoconversion behavior in the nanocrystal film integrated into the device. Consequently, the ambient-condition aging of 2D nanoplatelets on device substrate led to 3 times higher retention in photoconversion performance. Importantly, these results provide a new concept of how perovskite nanocrystals can be integrated into a device for enhanced stability in device performance.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

Controlling the growth of a SiO2 coating on hydrophobic CsPbBr3 nanocrystals towards aqueous transfer and high luminescence

Silica coating can effectively solve the stability issue of lead halide perovskite nanomaterials. However, it is difficult to achieve aqueous SiO₂ coating on hydrophobic CsPbBr₃ nanocrystals (NCs). In this paper, the hydrolysis process of tetramethoxysilane was controlled to get a homogeneous SiO₂ coating or a NC/SiO₂ Janus structure. In step 1, the Cs₄PbBr₆ NCs were silanized using partially hydrolyzed tetramethoxysilane (PH-TMOS). During this process, the Si-OH groups which came from PH-TMOS were absorbed onto the surface of the Cs₄PbBr₆ NCs with the removal of hydrophobic oleic acid (OA) ligands. In step 2, phase transformation from Cs₄PbBr₆ to CsPbBr₃ occurred owing to the injection of water. Meanwhile, further hydrolysis of TMOS took place and generated cross-linked Si-O-Si. Because the silanization in step 1 created lots of growth sites, the condensation of SiO₂ was not limited to the interface between water and hexane. After growing for 12 h, the fully covered CsPbBr₃@SiO₂ capsules were prepared. The anion exchange reactions of the CsPbBr₃@SiO₂ capsules were studied. Only one even and symmetric PL peak was apparent during the anion exchange process, which was different from the bare CsPbBr₃ NCs. This result demonstrated that the SiO₂ shell can act as a buffer layer to block the direct contact of CsPbBr₃ with the excess PbBr₂ precursor in solution. Compared with the CsPbBr₃ NCs, CsPbBr₃@SiO₂ showed better stability in polar solvent and air. A bright green emission was also observed under UV light after 90 days. The successful preparation of CsPbBr₃@SiO₂ capsules with enhanced stability paves the way for the further development of lead halide perovskite nanomaterials.

The Surface Chemistry and Structure of Colloidal Lead Halide Perovskite Nanocrystals

ConspectusSince the initial discovery of colloidal lead halide perovskite nanocrystals, there has been significant interest placed on these semiconductors because of their remarkable optoelectronic properties, including very high photoluminescence quantum yields, narrow size- and composition-tunable emission over a wide color gamut, defect tolerance, and suppressed blinking. These material attributes have made them attractive components for next-generation solar cells, light emitting diodes, low-threshold lasers, single photon emitters, and X-ray scintillators. While a great deal of research has gone into the various applications of colloidal lead halide perovskite nanocrystals, comparatively little work has focused on the fundamental surface chemistry of these materials. While the surface chemistry of colloidal semiconductor nanocrystals is generally affected by their particle morphology, surface stoichiometry, and organic ligands that contribute to the first coordination sphere of their surface atoms, these attributes are markedly different in lead halide perovskite nanocrystals because of their ionicity.In this Account, emerging work on the surface chemistry of lead halide perovskite nanocrystals is highlighted, with a particular focus placed on the most-studied composition of CsPbBr₃. We begin with an in-depth exploration of the native surface chemistry of as-prepared, 0-D cuboidal CsPbBr₃ nanocrystals, including an atomistic description of their surface termini, vacancies, and ionic bonding with ligands. We then proceed to discuss various post-synthetic surface treatments that have been developed to increase the photoluminescence quantum yields and stability of CsPbBr₃ nanocrystals, including the use of tetraalkylammonium bromides, metal bromides, zwitterions, and phosphonic acids, and how these various ligands are known to bind to the nanocrystal surface. To underscore the effect of post-synthetic surface treatments on the application of these materials, we focus on lead halide perovskite nanocrystal-based light emitting diodes, and the positive effect of various surface treatments on external quantum efficiencies. We also discuss the current state-of-the-art in the surface chemistry of 1-D nanowires and 2-D nanoplatelets of CsPbBr₃, which are more quantum confined than the corresponding cuboidal nanocrystals but also generally possess a higher defect density because of their increased surface area-to-volume ratios.

Photo-Induced Black Phase Stabilization of CsPbI3 QDs Films

α-CsPbI3 quantum dots (QDs) show outstanding photoelectrical properties that had been harnessed in the fabrication of perovskite QDs solar cells. Nevertheless, the stabilization of the CsPbI3 perovskite cubic phase remains a challenge due to its own thermodynamic and the presence of surface defects. Herein, we report the optimization of the CsPbI3 QDs solar cells, by monitoring the structure, the morphology and the optoelectronic properties after a precise treatment, consisting of the conventional solvent washing with a time limited ultraviolet (UV) exposure combination, during the layer-by-layer deposition. The UV treatment compensates the defects coming from the essential but deleterious washing treatment. The material is stable for 200 h and the PCE improved by the 25% compared with that of the device without UV treatment. The photo-enhanced ion mobility mechanism is discussed as the main process for the CsPbI3 QDs and solar cell stability.

Stable Hexylphosphonate-Capped Blue-Emitting Quantum-Confined CsPbBr3 Nanoplatelets

Quantum-confined CsPbBr₃ nanoplatelets (NPLs) are extremely promising for use in low-cost blue light-emitting diodes, but their tendency to coalesce in both solution and film form, particularly under operating device conditions with injected charge-carriers, is hindering their adoption. We show that employing a short hexyl-phosphonate ligand (C₆H₁₅O₃P) in a heat-up colloidal approach for pure, blue-emitting quantum-confined CsPbBr₃ NPLs significantly suppresses these coalescence phenomena compared to particles capped with the typical oleyammonium ligands. The phosphonate-passivated NPL thin films exhibit photoluminescence quantum yields of ∼40% at 450 nm with exceptional ambient and thermal stability. The color purity is preserved even under continuous photoexcitation of carriers equivalent to LED current densities of ∼3.5 A/cm². ¹³C, ¹³³Cs, and ³¹P solid-state MAS NMR reveal the presence of phosphonate on the surface. Density functional theory calculations suggest that the enhanced stability is due to the stronger binding affinity of the phosphonate ligand compared to the ammonium ligand.

Stable green and red dual-color emission in all-inorganic halide-mixed perovskite single microsheets

Recently, all-inorganic perovskites have attracted tremendous attention due to their excellent optoelectronic properties and extensive potential applications. However, these perovskites usually show a single emission wavelength because of the high ionic migration. Herein, we synthesized all-inorganic halide-mixed perovskite CsPbBr x I3-x microsheets with high crystal quality using the anti-solvent solution method and observed extraordinary green and red dual-color emission in single CsPbBr x I3-x microsheets. Power dependent PL spectra reveal excitonic and defect related recombination features of CsPbBr3 and CsPbI3 for the green and red emission. Temperature dependent PL spectra indicated a distinctive exciton-phonon coupling strength in CsPbBr x I3-x microsheets compared with pure CsPbBr3 and CsPbI3. The PL dynamics showing longer emission lifetime further confirmed this conclusion. Our work not only provides a novel strategy to produce stable dual-color emission integration, but also promotes the fundamental insight into the emission dynamics and exciton/free carrier related photophysics in all-inorganic halide-mixed perovskites.

Ionic liquid assisted preparation and modulation of the photoluminescence kinetics for highly efficient CsPbX3 nanocrystals with improved stability

CsPbX₃ (X = Cl, Br, I) nanocrystals (NCs) are competitive fluorescent materials for lighting and displays owing to their excellent photophysical properties. However, the stability and optoelectronic performance of the perovskite NCs are severely limited by the highly dynamic binding feature of the present ligand strategy. Herein, a facile approach was employed to synthesize CsPbBr₃ NCs with the assistance of the ionic liquid (IL) 1-butyl-3-methylimidazolium bromide ([Bmim]Br). By strictly controlling the addition dose of [Bmim]Br (n_IL/n_Pb = 0.125) into the reaction precursor, it is possible to obtain the desired cube-shaped and monodisperse CsPbBr₃ NCs with simultaneous enhancement of the storage and irradiation stability as well as photoluminescence quantum yields (PLQYs, ∼91%). Stability tests show that the emission intensity of the parent CsPbBr₃ NCs drops to 50% of its initial emission intensity after storage under an open atmosphere for 91 days, while the sample prepared with the assistance of [Bmim]Br can maintain 82% of the PL intensity. Meanwhile, the modified CsPbBr₃ NCs also present superior photo-stability, and still maintain 81% of the original PL intensity after continuous illumination under an ultraviolet lamp for 24 h, but the intensity of the parent CsPbBr₃ NCs reduces to 35% of the original intensity. Through the morphology, composition, and luminescence kinetics evolution of CsPbBr₃ NCs, these benefits were attributed to the modulation by [Bmim]Br, which could effectively provide Br ions for the formation and growth of NCs, resulting in the reduction of surface traps. Moreover, [Bmim]Br exhibited strong interactions with NCs, and the deprotonation of oleic acid (OA) was inhibited, resulting in the effective passivation of surface defects. Finally, CsPbX₃ NCs with different compositions were obtained via a facile anion exchange reaction, leading to the tunable emission in the range of 462-665 nm and a wide colour gamut (129.65% NTSC standard). This work opens a new avenue for modulating the surface properties of CsPbX₃ NCs, which will create opportunities for their application in the photoelectric field.

Charge Transfer Boosting Moisture Resistance of Seminude Perovskite Nanocrystals via Hierarchical Alumina Modulation

Boosting the stability improvement of cesium lead halide (CsPbX₃) perovskite nanocrystals (NCs) remains a serious challenge. In this work, CsPbX₃ NCs are effectively anchored on a hierarchical (h-) alumina (Al₂O₃) substrate to form seminude CsPbX₃@h-Al₂O₃ composites, which can emit strong green light even after being stored in water for 30 days, in sharp contrast to the pure CsPbBr₃ NCs. Other oxides, such as TiO₂, ZnO, and SiO₂, have no boosting effect on the moisture resistance of perovskite NCs. Subsequent density functional theory calculations reveal a significant charge transfer and strong Coulomb attraction between CsPbBr₃ and Al₂O₃. The substantial charge transfer via alumina substrate modulation not only can enhance the internal stability of CsPbBr₃ but also can cause CsPbBr₃ to be insensitive to water adsorption. These findings are expected to deepen our understanding of improving the stability of CsPbBr₃ NCs and shed light on the design of novel perovskite composites for long-term stable optoelectronic devices.

Ultrastable Laurionite Spontaneously Encapsulates Reduced-dimensional Lead Halide Perovskites

Reduced dimensional lead halide perovskites (RDPs) have attracted great research interest in diverse optical and optoelectronic fields. However, their poor stability is one of the most challenging obstacles prohibiting them from practical applications. Here, we reveal that ultrastable laurionite-type Pb(OH)Br can spontaneously encapsulate the RDPs in their formation solution without introducing any additional chemicals, forming RDP@Pb(OH)Br core-shell microparticles. Interestingly, the number of the perovskite layers within the RDPs can be conveniently and precisely controlled by varying the amount of CsBr introduced into the reaction solution. A single RDP@Pb(OH)Br core-shell microparticle composed of RDP nanocrystals with different numbers of perovskite layers can be also prepared, showing different colors under different light excitations. More interestingly, barcoded RDP@Pb(OH)Br microparticles with different parts emitting different lights can also be prepared. The morphology of the emitting microstructures can be conveniently manipulated. The RDP@Pb(OH)Br microparticles demonstrate outstanding environmental, chemical, thermal, and optical stability, as well as strong resistance to anion exchange processes. This study not only deepens our understanding of the reaction processes in the extensively used saturation recrystallization method but also points out that it is highly possible to dramatically improve the performance of the optoelectronic devices through manipulating the spontaneous formation process of Pb(OH)Br.

Temperature-Driven Transformation of CsPbBr3 Nanoplatelets into Mosaic Nanotiles in Solution through Self-Assembly

Two-dimensional colloidal halide perovskite nanocrystals are promising materials for light-emitting applications. Recent studies have focused on nanoplatelets that are able to self-assemble and transform on solid substrates. However, the mechanism behind the process and the atomic arrangement of their assemblies remain unclear. Here, we present a detailed analysis of the transformation of self-assembled stacks of CsPbBr₃ nanoplatelets in solution over a period of a few months by using ex situ transmission electron microscopy and surface analysis. We demonstrate that the transformation mechanism can be understood as oriented attachment, proceeding through the following steps: (i) desorption of the ligands from the surfaces of the particles, causing the seamless atomic merging of nanoplatelet stacks into nanobelts; (ii) merging of neighboring nanobelts that form more extended nanoplates; and (iii) attachment of nanobelts and nanoplates, forming objects with an atomic structure that resembles a mosaic made of broken nanotiles. We reveal that aged nanobelts and nanoplates, which are mainly stabilized by amine/ammonium ions, link through a bilayer of CsBr, with the atomic columns of neighboring perovskite lattices shifted by a half-unit-cell, forming Ruddlesden-Popper planar faults. We also show, via in situ monitoring of the nanocrystal photoluminescence combined with transmission electron microscopy analysis, that the transformation is temperature driven and that it can take place within tens of minutes in solution and in spin-coated films. Understanding this process gives crucial information for the design and fabrication of perovskite materials, where control over the type and density of defects is desired, stimulating the development of perovskite nanocrystal structures with tailored electronic properties.

Visualization of materials using the confocal laser scanning microscopy technique

The development of materials science always benefits from advanced characterizations. Currently, imaging techniques are of great technological importance in both fundamental and applied research on materials. In comparison to conventional visualization methods, confocal laser scanning microscopy (CLSM) is non-invasive, with macroscale and high-contrast scanning, a simple and fast sample preparation procedure as well as easy operation. In addition, CLSM allows rapid acquisition of longitudinal and cross-sectional images at any position in a material. Therefore, the CLSM-based visualization technique could provide direct and model-independent insight into material characterizations. This review summarizes the recent applications of CLSM in materials science. The current CLSM approaches for the visualization of surface structures, internal structures, spatial structures and reaction processes are discussed in detail. Finally, we provide our thoughts and predictions on the future development of CLSM in materials science. The purpose of this review is to guide researchers to build a suitable CLSM approach for material characterizations, and to open viable opportunities and inspirations for the development of new strategies aiming at the preparation of advanced materials. We hope that this review will be useful for a wide range of research communities of materials science, chemistry, and engineering.

Wavelength-Tunable Single-Mode Microlasers Based on Photoresponsive Pitch Modulation of Liquid Crystals for Information Encryption

Information encryption and decryption have attracted particular attention; however, the applications are frequently restricted by limited coding capacity due to the indistinguishable broad photoluminescence band of conventional stimuli-responsive fluorescent materials. Here, we present a concept of confidential information encryption with photoresponsive liquid crystal (LC) lasing materials, which were used to fabricate ordered microlaser arrays through a microtemplate-assisted inkjet printing method. LC microlasers exhibit narrow-bandwidth single-mode emissions, and the wavelength of LC microlasers was reversibly modulated based on the optical isomerization of the chiral dopant in LCs. On this basis, we demonstrate phototunable information authentication on LC microlaser arrays using the wavelength of LC microlasers as primary codes. These results provide enlightenment for the implementation of microlaser-based cryptographic primitives for information encryption and anticounterfeiting applications.

Synthesis and model simulation of the hexagonal to circular transition of perovskite cesium lead halide nanosheets by rapidly changing the temperature

Lead halide perovskites have emerged as promising optoelectronic materials due to their excellent efficiencies in photovoltaic and light-emitting applications. CsPbBr₃ is a kind of all-inorganic perovskite that exhibits higher stability. Here, we report the synthesis of hexagonal and circular all-inorganic CsPbBr₃ perovskite nanoplates by changing the reaction temperature. As time goes on, the different reaction temperatures play an important role in determining the shape and size. We use first-principles to explicate the formation of hexagonal nanoplates. Meanwhile, a model is built and the calculation of the properties is conducted. In brief, a method to directly and conveniently synthesize all-inorganic CsPbBr₃ is proposed.

Lead halide perovskites have emerged as promising optoelectronic materials due to their excellent efficiencies in photovoltaic and light-emitting applications.

Setting an Upper Bound to the Biexciton Binding Energy in CsPbBr3 Perovskite Nanocrystals

Cesium lead halide perovskite nanocrystals are promising emissive materials for a variety of optoelectronic applications. To fully realize the potential of these materials, we must understand the energetics and dynamics of multiexciton states which are populated under device relevant excitation conditions. We utilized time-resolved and spectrally-resolved photoluminescence studies to investigate the biexciton binding energy as well as a red-shifted emission feature previously reported under high-flux excitation conditions. We determine that this red-shifted emission feature can be ascribed to sample sintering induced by air-exposure and high-flux irradiation. Furthermore, we determine that the biexciton binding energy at room temperature is at most ±20 meV, providing a key insight toward understanding many-body interactions in the lead halide perovskite lattice.

Synergetic Effect of the Surfactant and Silica Coating on the Enhanced Emission and Stability of Perovskite Quantum Dots for Anticounterfeiting

Recently, the growing demand for optical anticounterfeiting technology has motivated intensive research in newly emerging halide perovskite quantum dots (QDs). However, the poor stability and unsatisfactory fluorescence efficiency of such materials are the main obstacles to the application of reliable anticounterfeiting. In this work, we performed a well-controlled investigation of the effect of the surfactant (l-α-phosphatidylcholine, LP) and silica encapsulation on the stability and emission of the CsPbBr₃ QDs. Because of the synergetic effect of the surfactant and core/shell configuration, the resulting CsPbBr₃/LP/SiO₂ QD composites demonstrated a higher photoluminescence quantum yield (>90%), a better color purity, and a significantly improved stability in heat, ultraviolet light, water, and ambient oxygen, which provide them the basic conditions as a high-tech security ink for anticounterfeiting. By inkjet printing technology, we demonstrated that our CsPbBr₃/LP/SiO₂ QD composites can act as a smart concealed ink for information encryption and decryption. More importantly, the anticounterfeiting effect can be efficiently sustained even though the paper with designable patterns was crudely treated by water-soaking, heating/cooling cycling, and continuous ultraviolet light switching (1500 cycles). The above results obtained provide effective strategies to improve emission efficiency and stability of perovskite QDs, thereby enduing them anticounterfeiting application potential.

Photon-Induced Reshaping in Perovskite Material Yields of Nanocrystals with Accurate Control of Size and Morphology

Benefiting from morphology-/size-tunable optical features, nanocrystals have been considered promising candidates for display or lighting applications. To achieve selective characteristic emission, precise control in size and morphology is thus a prerequisite. Herein, we report that the nanosecond-pulsed laser irradiation induces CsPbBr₃ reshaping, yielding precise control of size and morphology. Under 532 and 355 nm laser irradiation, polydisperse CsPbBr₃ nanocrystals or raw micron powders can be reshaped into uniform sizes of 12 and 6 nm, respectively. Moreover, by tuning ligand composition, the morphology of reshaped nanocrystals can be manipulated, such as nanocubes, nanorods, or nanosheets. Results reveal that the reshaping process relies on striving for a delicate balance between energy deposition and heat dissipation under irradiation. A low dissipation rate leads to temperature rising and lattice breaking, which turn out to be the driving forces for reshaping. This feasible method provides a reliable, and scalable route toward preparation of perovskite functional nanocrystals.

Metal Halide Perovskite Nanocrystals: Synthesis, Post-Synthesis Modifications, and Their Optical Properties

Metal halide perovskites represent a flourishing area of research, which is driven by both their potential application in photovoltaics and optoelectronics and by the fundamental science behind their unique optoelectronic properties. The emergence of new colloidal methods for the synthesis of halide perovskite nanocrystals, as well as the interesting characteristics of this new type of material, has attracted the attention of many researchers. This review aims to provide an up-to-date survey of this fast-moving field and will mainly focus on the different colloidal synthesis approaches that have been developed. We will examine the chemistry and the capability of different colloidal synthetic routes with regard to controlling the shape, size, and optical properties of the resulting nanocrystals. We will also provide an up-to-date overview of their postsynthesis transformations, and summarize the various solution processes that are aimed at fabricating halide perovskite-based nanocomposites. Furthermore, we will review the fundamental optical properties of halide perovskite nanocrystals by focusing on their linear optical properties, on the effects of quantum confinement, and on the current knowledge of their exciton binding energies. We will also discuss the emergence of nonlinear phenomena such as multiphoton absorption, biexcitons, and carrier multiplication. Finally, we will discuss open questions and possible future directions.

Hydroxyl terminated mesoporous silica-assisted dispersion of ligand-free CsPbBr3/Cs4PbBr6 nanocrystals in polymer for stable white LED

Composite nanocrystals of CsPbBr3/Cs4PbBr6 have gained significant attention because of their high stability and unique photoelectronic property. However, their dispersion within polymers is rather difficult due to the absence of ligands, which limits further enhancement of stability and practical applications. Herein, a feasible, effective, and general method was developed to assist the dispersion of CsPbBr3/Cs4PbBr6 nanocrystals in polymer by using -OH terminated mesoporous silica as a micro-container. The composite film obtained is employed as the light emitter for the fabrication of white LEDs. It was found that silica loaded with composite nanocrystals disperse uniformly in the composite film which shows excellent stability with a half-life of 400 hours under the illumination with optical power density of 1.7 × 103 mW cm-2 and peak wavelength of 457 nm. The inner pore of the micro-container attracts precursors and confines the crystallization, leading to the incorporation of CsPbBr3/Cs4PbBr6 nanocrystals. Meanwhile, the hydrogen bonding of the outer surface with poly(methyl methacrylate) (PMMA) enables good dispersion of the loaded micro-containers in PMMA as evidenced by the optical microscopy characterization and water resistance test. Moreover, this strategy can also be applied to other kinds of polymers since the outside -OH group can react with siliane coupling agents. On the basis of stability tests associated with silica and polymer encapsulation, a possible mechanism is proposed for the enhancement of the stability of composite films under working condition.

Luminescent perovskites: recent advances in theory and experiments

This review summarizes previous research on luminescent perovskites, including oxides and halides, with different structural dimensionality. The relationship between the crystal structure, electronic structure and properties is discussed in detail.