Ternary Blend Organic Solar Cells: Understanding the Morphology from Recent Progress

Utilizing hybridization effects to tune morphology and electron mobility of Y6 through asymmetric small- and large-scale modifications of terminal groups

While exploring molecular modifications of the high-performance acceptor Y6 with an A-DA'D-A framework, researchers have discovered that asymmetric modification of terminal groups (TGs) appears to be a promising approach as it frequently enhances the photovoltaic performance of organic solar cells (OSCs) effectively. However, the underlying mechanism about how asymmetric TG modifications influence morphology and charge carrier mobility remains unclear. We have conducted a systematic study in this work to investigate the morphology and electron mobility of two asymmetric Y6 derivatives with the A1-DA'D-A2 framework: Y6-asym-IM2O (A1 = IM-2F and A2 = IM2O, representing small-scale TG modification) and Y6-asym-BR (A1 = IM-2F and A2 = BR, representing large-scale TG modification), along with their symmetric counterparts (A1 = A2 = IM-2F/BR/IM2O). The results demonstrate that small-scale asymmetric TG modifications such as Y6-asym-IM2O fine-tune molecular packing, while large-scale modifications such as Y6-asym-BR drastically alter stacking patterns. In addition, hybridization effects are found in the frontier molecular orbital energy, electrostatic potential, and electron mobility of the asymmetric molecules, which fall between the values of their symmetric counterparts. In particular, the results of small-scale asymmetric modification of Y6 reveal that the introduction of promising TGs in an asymmetric manner can further improve electron mobility by tuning reorganization energy and morphology, and vice versa. While previous studies focused on symmetric modifications, this work systematically investigates asymmetric substitution patterns and further elucidates the impact of these methods on charge transfer for the first time. These discoveries underscore the potential of utilizing asymmetric modification of TGs as a quantitative means to regulate electron mobility in Y6-based OSCs.

2D g-C3N5 p-Doping of Donor Material for High-Efficiency Organic Solar Cells

Molecular doping of organic semiconductor is a great strategy for significantly regulating the electronic band structure of organic semiconductor while increasing charge mobility and carrier concentration. Here, a facile strategy is presented by introducing 2D g-C3N5 as a p-dopant into PM6, improving the charge mobility and hole carrier concentration of PM6. Moreover, the electron transfer between PM6 and g-C3N5 can effectively downshift the Fermi energy level and highest occupied molecular orbital (HOMO) energy level of PM6, which leads to the increase the built-in electric field of organic solar cells (OSCs). The addition of g-C3N5 also effectively enhances the crystallization of active layer, thereby improving the stability of OSCs. As a result, a champion bulk-heterojunction (BHJ) and layer-by-layer (LbL) structure OSCs are successfully achieved featuring a high-power conversion efficiency of 18.10%/18.25%, simultaneously having excellent device stability. This work shows that introducing a low concentration dopant into organic donor is an effective method for improving the electrical performance of organic donor and the efficiency of OSCs.

Precise Control Over Crystallization Kinetics by Combining Nucleating Agents and Plasticizers for 20.1% Efficiency Organic Solar Cells

Obtaining controllable active layer morphology plays a significant role in boosting the device performance of organic solar cells (OSCs). Herein, a quaternary strategy, which incorporates polymer donor D18-Cl and small molecule acceptor AITC into the host D18:N3, is employed to precisely modulate crystallization kinetics for favorable morphology evolution within the active layer. In situ spectroscopic measurements during film-formation demonstrate that while D18-Cl works as a nucleator to promote aggregation of D18 and foster donor/acceptor intermixing, AITC has exactly the opposite impact on aggregation of N3 and intermixing kinetics of donor and acceptor, working as a plasticizer. The mutually compensational effect of the dual-guests, as a result, enables synergistic control over fibrillar networks, multi-length scale morphology, and vertical phase distribution, leading to optimized 3D morphology for greatly enhanced exciton dissociation and charge transfer, suppressed charge recombination, and reduced energy loss. Consequently, the quaternary OSCs based on D18:D18-Cl:N3:AITC achieved an excellent power conversion efficiency of 20.1%, which represents one of the highest efficiencies for single-junction OSCs. This work presents an effective strategy to precisely regulate crystallization kinetics toward advanced morphology control for high-performance OSCs.

Understanding the Effect of Regioselective Fluorination in Tuning Miscibility and Crystallinity of Polymer Donors for Efficient Organic Solar Cells

Fluorination is a widely adopted strategy for modifying polymer donors (PDs) in organic solar cells (OSCs). The incorporation of fluorine atoms is known to enhance crystallinity and facilitate charge transport of PDs, thereby boosting the short-circuit current density  of related OSCs. However, improperly executed fluorination can impair miscibility with acceptors, leading to excessive self-aggregation, unfavorable phase separation, serious charge reorganization, and increased energy loss. It is crucial to balance the crystallinity and miscibility of PDs for efficient OSCs. In this study, four PDs, SL1 to SL4, are designed with varying degrees of fluorination by precisely controlling the fluorination sites within D-A conjugate polymers. Notably, SL2, fluorinated on the A unit, exhibits optimal aggregation behavior and crystallinity while maintaining good miscibility with acceptors. Consequently, SL2 achieved reduced energy loss and delivered an impressive power conversion efficiency of 15.35% in binary devices. Furthermore, D18:Y6:SL2 based ternary device achieved a remarkable PCE of over 19%. This work offers new insights into the fluorination of PDs and a strategy for synergistic enhancement in crystallinity and miscibility for OSCs.

Coplanar Dimeric Acceptors with Bathochromic Absorption and Torsion-Free Backbones through Precise Fluorination Enabling Efficient Organic Photovoltaics with 18.63% Efficiency

Giant dimeric acceptors (GDAs), a sub-type of acceptor materials for organic solar cells (OSCs), have garnered much attention due to the synergistic advantages of their monomeric and polymeric acceptors, forming a well-defined molecular structure with a giant molecular weight for high efficiency and stability. In this study, for the first time, two new GDAs, DYF-V and DY2F-V are designed and synthesized for OSC operation, by connecting one vinylene linker with the mono-/di-fluorinated end group on two Y-series monomers, respectively. After fluorination, both DYF-V and DY2F-V exhibit bathochromic absorption and denser packing modes due to the stronger intramolecular charge transfer effect and torsion-free backbones. Through precise fluorination, the DYF-V-based devices exhibit the highest performance of 18.63% among the GDA-based OSCs, outperforming its non-fluorinated counterpart, DY-V-based ones (16.53%). Theoretical and morphological results demonstrate that proper fluorination in DYF-V-based devices strengthens intra/intermolecular interactions for enhanced crystallinity, superior phase segregation, and less energy disorder, which is beneficial for fast exciton dissociation, rapid carrier transport, and suppressed charge recombination. The work demonstrates that proper fluorination on GDAs with rigid coplanar backbones is effective for broader photon harvesting, stronger packing, and robust stability in GDA-based OSCs.

Exploring the Origin of High Thermal Stability of the Performance of Pseudo-Quaternary All-Polymer Solar Cells

As all-polymer solar cells (all-PSCs) have achieved impressive power conversion efficiencies (PCEs), extending their lifetime under long-term operation is also increasingly important. To address this issue, in this study, a new pseudo-quaternary blend composed of conjugated block copolymer donors and acceptors, PM6-b-TT:b-PYT, is introduced as the active layer for all-PSCs. Compared to the all-PSC based on the traditional binary blend, PM6:BTTP-T, those based on pseudo-quaternary active layer exhibited significantly improved thermal stability after thermal annealing under harsh conditions of 150 °C in an ambient atmosphere. More importantly, to elucidate the morphological stability of the pseudo-quaternary active layer, visible evidence of the thin film's surface and internal structure is carefully investigated by multiple advanced techniques. After extended thermal stress at 150 °C, the binary bulk heterojunction (BHJ) films exhibit excessive polymer chain aggregation, phase separation of the polymers, and increased surface roughness, forming bulk charge traps and increasing the exciton recombination. Meanwhile, the pseudo-quaternary BHJ films maintain the crystallinity and nanostructure of the active layer, improving the stability of the all-PSCs. Overall, this study provides a detailed understanding of the long-term stability of high-efficiency all-PSCs, offering key insights into the polymer section and proposing promising polymer structures for the long-term stability of all-PSCs.

"Double-Gene" Small Molecule as Guest Component Promotes the Efficiency of Organic Solar Cells Beyond 19.5

Introduction of a guest component into the active layer is a simple yet effective approach to enhance the performance of organic solar cells (OSCs). Despite various guest components successfully employed in the OSCs, efficient guest components require deliberate design and ingenious inspiration, which still remains a big challenge for developing high performance OSCs. In this work, we propose a concept of "structural gene" engineering to create a new "double-gene" small molecule (L-DBDD) by simply combining the structures of both donor PM6 and acceptor L8-BO. L-DBDD inherit the features of both donor and acceptor, which naturally acts as a bridge between donor/acceptor (D/A) interfaces to strengthen D/A interactions and compatibility. Incorporation of this "double-gene" small molecule into the active layer can facilitate rapid charge dissociation and simultaneously optimize molecular packing for efficient charge transport. Consequently, the ternary OSC based on PM6 : L-DBDD : L8-BO blend achieves a top power conversion efficiency (PCE) of 19.51 %, significantly suppressing the binary control device (PCE=18.52 %). These results demonstrate that the design concept of "double-gene" small molecule by combination of the "structural gene" of donor and acceptor provides a simple and meaningful guideline for guest component-assisted highly efficient OSCs.

Morphological Control of Y6 Thin Films Reveals Charge Transfer Is Facilitated by Co-facial Interactions

The organic semiconductor Y6 has been extensively used as an acceptor in organic photovoltaic devices, yielding high efficiencies. Its unique properties include a high refractive index, intrinsic exciton dissociation, and barrierless charge generation in bulk heterojunctions. However, the direct impact of the crystal packing morphology on the photophysics of Y6 has remained elusive, hindering further development of heterojunction and homojunction devices. Herein, we study the photogenerated species in multiple distinct Y6 crystal packing geometries via transient absorption spectroscopy and photovoltaic measurements of the corresponding single-component devices. Our results reveal that "co-facial" interactions drive the generation of charge-transfer states in neat films of Y6 and that exciton dissociation can be switched on and off by controlling these interactions. Additionally, we find that a combination of long-range order and more co-facial packing interactions accelerates the charge-transfer generation process and increases the exciton to charge-transfer conversion efficiency. These insights provide valuable structure-property relationships for optimizing device performance.

The Pseudo-Bilayer Bulk Heterojunction Active Layer of Polymer Solar Cells in Green Solvent with 18.48% Efficiency

Planar heterojunction (PHJ) is employed to obtain proper vertical phase separation for highly efficient polymer solar cells (PSCs). However, it heavily relies on the choice of orthogonal solvent in the production process. Here, we fabricated a pseudo-bilayer bulk heterojunction (PBHJ) PSC with cross-distribution in the vertical direction by preparing two layers of PM6 and BTP-eC9 blends in an o-XY solution with different dilution ratios to study the morphological evolution of PBHJ film. We found that the PBHJ film exhibits more uniform and suitable continuous interpenetrating network morphology and proper phase separation in the vertical direction for the formation of p-i-n structure. This provides an effective channel for exciton dissociation and charge transport, which is confirmed by both exciton generation simulations and charge dynamics measurements. The PBHJ devices can effectively inhibit trap recombination and accelerate charge separation and transfer. Based on good active layer morphology and balanced charge mobility, all-green solvent-processed PSCs with champion power conversion efficiencies (PCEs) of 18.48% and 16.83% are obtained in PM6:BTP-eC9 and PTQ10:BTP-eC9 systems, respectively. This work reveals the potential mechanism of morphological evolution induced by the PBHJ structure and provides an alternative approach for developing solution processing PSCs.

Organic Solar Cells Based on Non-Fullerene Low Molecular Weight Organic Semiconductor Molecules

The development of narrow bandgap A-D-A- and ADA'DA-type non-fullerene small molecule acceptors (NFSMAs) along with small molecule donors (SMDs) have led to significant progress in all-small molecule organic solar cells. Remarkable power conversion efficiencies, nearing the range of 17-18 %, have been realized. These efficiency values are on par with those achieved in OSCs based on polymeric donors. The commercial application of organic photovoltaic technology requires the design of more efficient organic conjugated small molecule donors and acceptors. In recent years the precise tuning of optoelectronic properties in small molecule donors and acceptors has attracted considerable attention and has contributed greatly to the advancement of all-SM-OSCs. Several reviews have been published in this field, but the focus of this review concerns the advances in research on OSCs using SMDs and NFSMAs from 2018 to the present. The review covers the progress made in binary and ternary OSCs, the effects of solid additives on the performance of all-SM-OSCs, and the recently developed layer-by-layer deposition method for these OSCs. Finally, we present our perspectives and a concise outlook on further advances in all-SM-OSCs for their commercial application.

Buried Interface Modification Toward Efficient CsPbI2.2Br0.8 Based Monolithic Perovskite/Organic Tandem Solar Cells

Wide-bandgap perovskite sub-cells (WPSCs), one of the most crucial components of perovskite-based tandem solar cells (PTSCs), play a critical role in determining the performance of tandem devices. However, confined by the compromised crystallization properties of wide-bandgap perovskites, WPSCs exhibit significantly lower efficiency than their theoretical limit. In particular, for n-i-p structured all-inorganic WPSCs (AIWPSCs), severe nonradiative recombination due to the buried interface defects severely decreases the photovoltaic performance. Herein, an efficient propionate group (PA-) based ionic liquid, methylamine propionate (MAPA), is introduced into the perovskite/electron-transport layer (ETL) interface to passivate the buried interface of AIWPSCs. The intense interaction between the PA- and Pb-Pb dimer effectively heals the defects at the buried interface and facilitates a more homogeneous elemental distribution in the perovskite film. As a result, CsPbI2.2Br0.8-based AIWPSCs with a high power conversion efficiency (PCE) of 18.29% and open-circuit voltage (VOC) of 1.33 V are obtained, which illustrates the superiority of MAPA in optimizing the performance of AIWPSCs. Moreover, by integrating these AIWPSCs with small-bandgap organic solar cells (SOSCs), high performance n-i-p structured all-inorganic perovskite/organic tandem solar cells (AIPOTSCs) with a high PCE of 23.19% and VOC of 2.08 V are also achieved.

Non-Fused π-Extension of Endcaps of Small Molecular Acceptors Enabling High-Performance Organic Solar Cells

The modular structure of small molecular acceptors (SMAs) allows for versatile modifications of the materials and boosts the photovoltaic efficiencies of organic solar cells (OSCs) in recent years. As a critical component, the endcaps of SMAs have been intensively investigated and modified to control the molecular aggregation and photo-electronic conversion. However, most of the studies focus on halogenation or π-fusion extension of the endcap moieties, but overlook the non-fused π-extension approach, which could be a promising strategy to balance the self-aggregation and compatibility behaviors. Herein, we reported two new acceptors namely BTP-Th and BTP-FTh based on non-fused π-extension of the endcap by chlorinated-thiophene, of which the latter molecule has better co-planarity and crystallinity because of the intramolecular noncovalent interactions. Paired with donor PBDB-T, the optimal device of BTP-FTh reveals a greater efficiency of 14.81 % that that of BTP-Th (13.91 %). Nevertheless, the BTP-Th based device realizes a lower energy loss, enabling BTP-Th as a good candidate to serve as guest acceptor. As a result, the ternary solar cells of PM6 : BTP-eC9 : BTP-Th output a champion efficiency up to 18.71 % with enhanced open-circuit voltage. This study highlights the significance of rational decoration of endcaps for the design of high-performance SMAs and photovoltaic cells.

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2-b]thiophene Additive

Delicately manipulating nanomorphology is recognized as a vital and effective approach to enhancing the performance and stability of organic solar cells (OSCs). However, the complete removal of solvent additives with high boiling points is typically necessary to maintain the operational stability of the device. In this study, two commercially available organic intermediates, namely thieno[3,2-b]thiophene (TT) and 3,6-dibromothieno[3,2-b]thiophene (TTB) are introduced, as solid additives in OSCs. The theoretical simulations and experimental results indicate that TT and TTB may exhibit stronger intermolecular interactions with the acceptor Y6 and donor PM6, respectively. This suggests that the solid additives (SAs) can selectively intercalate between Y6 and PM6 molecules, thereby improving the packing order and crystallinity. As a result, the TT-treated PM6:Y6 system exhibits a favorable morphology, improved charge carrier mobility, and minimal charge recombination loss. These characteristics contribute to an impressive efficiency of 17.75%. Furthermore, the system demonstrates exceptional thermal stability (T80 > 2800 h at 65 °C) and outstanding photostability. The universal applicability of TT treatment is confirmed in OSCs employing D18:L8-BO, achieving a significantly higher PCE of 18.3%. These findings underscore the importance of using appropriate solid additives to optimize the blend morphology of OSCs, thereby improving photovoltaic performance and thermal stability.

Loosely Bounded Exciton with Enhanced Delocalization Capability Boosting Efficiency of Organic Solar Cells

In organic solar cells (OSCs), electron acceptors have undergone multiple updates, from the initial fullerene derivatives, to the later acceptor-donor-acceptor type non-fullerene acceptors (NFAs), and now to Y-series NFAs, based on which efficiencies have reached over 19%. However, the key property responsible for further improved efficiency from molecular structure design is remained unclear. Herein, the material properties are comprehensively scanned by selecting PC71BM, IT-4F, and L8-BO as the representatives for different development stages of acceptors. For comparison, asymmetric acceptor of BTP-H5 with desired loosely bounded excitons is designed and synthesized. It's identified that the reduction of intrinsically exciton binding energy (Eb) and the enhancement of exciton delocalization capability act as the key roles in boosting the performance. Notably, 100 meV reduction in Eb has been observed from PC71BM to BTP-H5, correspondingly, electron-hole pair distance of BTP-H5 is almost two times over PC71BM. As a result, efficiency is improved from 40% of S-Q limit for PC71BM-based OSC to 60% for BTP-H5-based one, which achieves an efficiency of 19.07%, among the highest values for binary OSCs. This work reveals the confirmed function of exciton delocalization capability quantitatively in pushing the efficiency of OSCs, thus providing an enlightenment for future molecular design.

The Multi-Functional Third Acceptor Realizes the Synergistic Improvement in Photovoltaic Parameters and the High-Ratio Tolerance of Ternary Organic Photovoltaics

The ternary strategy proves effective for breakthroughs in organic photovoltaics (OPVs). Elevating three photovoltaic parameters synergistically, especially the proportion-insensitive third component, is crucial for efficient ternary devices. This work introduces a molecular design strategy by comprehensively analyzing asymmetric end groups, side-chain engineering, and halogenation to explore the outstanding optoelectronic properties of the proportion-insensitive third component in efficient ternary systems. Three asymmetric non-fullerene acceptors (BTP-SA1, BTP-SA2, and BTP-SA3) are synthesized based on the Y6 framework and incorporated as the third component into the D18:Y6 binary system. BTP-SA3, featuring asymmetric terminal (difluoro-indone and dichloride-cyanoindone terminal), with branched alkyl side chains, exhibited high open-circuit voltage (VOC), balanced crystallinity and compatibility, achieving synergistic enhancements in VOC (0.862 V), short circuit-current density (JSC, 27.52 mA cm-2), fill fact (FF, 81.01%), and power convert efficiency (PCE, 19.19%). Device based on D18/Y6:BTP-SA3 (layer-by-layer processed) reached a high efficiency of 19.36%, demonstrating a high tolerance for BTP-SA3 (10-50%). This work provides novel insights into optimizing OPVs performances in multi-component systems and designing components with enhanced tolerance.

Polyfluoride Acceptor with Limited Molecular Diffusion Enables Efficient and Stable Ternary Organic Solar Cells

Due to the slow diffusion of photovoltaic molecules, in particular, small-molecule acceptors (SMAs), under light and heating, the morphology of the active layer in organic solar cells (OSCs) prefers to deviate from the favorably metastable status, leading to the challenge of stability during long-term operation. Employing materials with a high glass transition temperature (Tg) as the third component to suppress molecular diffusion is an efficient method to achieve the balance of efficiency and stability of OSCs. Herein, a dimerized small-molecule acceptor denoted as F6D is synthesized by introducing a polyfluoride moiety as the linker to enhance the Tg. Benefitting from a rational molecular design, F6D not only exhibits a higher Tg, complementary absorption, and cascade energy levels with the host materials of the polymer donor PM6 and the SMA Y6 but also has excellent miscibility and multiple intermolecular interactions with Y6. As a result, a champion power conversion efficiency of 17.52% is achieved in the optimal PM6:Y6:F6D-based device. More importantly, the ternary device exhibits superior stability under continuous heating and lighting compared with the binary device.

Conjugation-Broken Dimer Acceptors Enable High-Efficiency, Stable, and Flexibility-Robust Organic Solar Cells

Dimer acceptors in organic solar cells (OSCs) offer distinct advantages, including a well-defined molecular structure and excellent batch-to-batch reproducibility. Their high glass transition temperature (Tg) aids in achieving an optimal kinetic morphology, thereby enhancing device stability. Currently, most of dimer acceptor materials are linked with conjugated units in order to obtain high power conversion efficiencies (PCEs). In this study, different from previous works on conjugation-linked dimer acceptors, a novel series of dimer acceptors are synthesized (named T1, T4, T6, and T12), each linked with different flexible alkyl linkers, and investigated their PCEs, device stability, and flexibility robustness. When blended with PM6, the T6-based device achieves a PCE of 17.09%, comparable to the fully conjugated T0-based device's PCE of 17.12%. The molecular dynamics simulations and density functional theory calculations suggested that flexible conjugation-broken linkers (FCBLs) promote intermolecular electronic couplings, thereby maintaining good electron mobilities of dimer acceptors. Notably, the T6-based device exhibits impressive long-term stability with a T80 lifetime of 1427 h, while in the T0-based device, T80 is only 350 h. The present work has thus established the relationship between the length of flexible alkyl linkers in such dimer acceptors and the performance and stability of OSCs, which is important to further designing new materials for the fabrication of efficient and stable OSCs.

Tailoring the Molecular Planarity of Perylene Diimide-Based Third Component toward Efficient Ternary Organic Solar Cells

Incorporating a third component into binary organic solar cells (b-OSCs) has provided a potential platform to boost power conversion efficiency (PCEs). However, gaining control over the non-equilibrium blend morphology via the molecular design of the perylene diimide (PDI)-based third component toward efficient ternary organic solar cells (t-OSCs) still remains challenging. Herein, two novel PDI derivatives are developed with tailored molecular planarity, namely ufBTz-2PDI and fBTz-2PDI, as the third component for t-OSCs. Notably, after performing a cyclization reaction, the twisted ufBTz-2PDI with an amorphous character transferred to the highly planar fBTz-2PDI followed by a semi-crystalline character. When incorporating the semi-crystalline fBTz-2PDI into the D18:L8-BO system, the resultant t-OSC achieved an impressive PCE of 18.56%, surpassing the 17.88% attained in b-OSCs. In comparison, the addition of amorphous ufBTz-2PDI into the binary system facilitates additional charge trap sites and results in a deteriorative PCE of 14.37%. Additionally, The third component fBTz-2PDI possesses a good generality in optimizing the PCEs of several b-OSCs systems are demonstrated. The results not only provided a novel A-DA'D-A motif for further designing efficient third component but also demonstrated the crucial role of modulated crystallinity of the PDI-based third component in optimizing PCEs of t-OSCs.

An Indacenodithienothiophene-Based Wide Bandgap Small Molecule Guest for Efficient and Stable Ternary Organic Solar Cells

The strategic and logical development of the third component (guest materials) plays a pivotal and intricate role in improving the efficiency and stability of ternary organic solar cells (OSCs). In this study, a novel guest material with a wide bandgap, named IDTR, is designed, synthesized, and incorporated as the third component. IDTR exhibits complementary absorption characteristics and cascade band alignment with the PM6:Y6 binary system. Morphological analysis reveals that the introduction of IDTR results in strong crystallinity, good miscibility, and proper vertical phase distribution, thereby realizing heightened and balanced charge transport behavior. Remarkably, the novel ternary OSCs have exhibited a significant enhancement in photovoltaic performance. Consequently, open-circuit voltage (VOC), short-circuit current (JSC), and fill factor (FF) have all witnessed substantial improvements with a remarkable power conversion efficiency (PCE) of 18.94% when L8-BO replaced Y6. Beyond the pronounced improvement in photovoltaic performance, superior device stability with a T80 approaching 400 h is successfully achieved. This achievement is attributed to the synergistic interplay of IDTR, providing robust support for the overall enhancement of performance. These findings offer crucial guidance and reference for the design and development of efficient and stable OSCs.

Effect of Aggregation Structure on Capacitive Energy Storage in Conducting Polymer Films

Conducting polymers (CPs), a significant class of electrochemical capacitor electrode materials, exhibit exceptional capacitive energy storage performance in aqueous electrolytes. Current research primarily concentrates on enhancing the electrical conductivity and capacitive performance of CPs via molecular design and structural control. However, the absence of a comprehensive understanding of the impact of molecular chain spatial order on ion/electron transport and capacitive performance impedes the development and optimization of advanced electrode materials. Here, a solvent treatment strategy is employed to modulate the molecular chain spatial order of PEDOT : PSS films. The results of electrochemical performance tests and Grazing Incidence Wide Angle X-ray Scattering (GIWAXS) show that Poly(3,4-ethylenedioxythiophene) : poly(styrenesulfonic acid) (PEDOT : PSS) films with both face-on and edge-on orientations exhibit exceptional electronic conductivity and ion diffusion efficiency, with capacitive performance 1.33 times higher than that of PEDOT : PSS films with only edge-on orientation. Consequently, molecular chain orientations conducive to charge transport not only enhance inter-chain coupling, but also effectively reduce ion transport resistance, enabling efficient capacitive energy storage. This research provides novel insights for the design and development of higher performance CPs-based electrode materials.

Ethylenedioxythiophene-Based Small Molecular Donor with Multiple Conformation Locks for Organic Solar Cells with Efficiency of 19.3

Ternary organic solar cells (T-OSCs) represent an efficient strategy for enhancing the performance of OSCs. Presently, the majority of high-performance T-OSCs incorporates well-established Y-acceptors or donor polymers as the third component. In this study, a novel class of conjugated small molecules has been introduced as the third component, demonstrating exceptional photovoltaic performance in T-OSCs. This innovative molecule comprises ethylenedioxythiophene (EDOT) bridge and 3-ethylrhodanine as the end group, with the EDOT unit facilitating the creation of multiple conformation locks. Consequently, the EDOT-based molecule exhibits two-dimensional charge transport, distinguishing it from the thiophene-bridged small molecule, which displays fewer conformation locks and provides one-dimensional charge transport. Furthermore, the robust electron-donating nature of EDOT imparts the small molecule with cascade energy levels relative to the electron donor and acceptor. As a result, OSCs incorporating the EDOT-based small molecule as the third component demonstrate enhanced mobilities, yielding a remarkable efficiency of 19.3 %, surpassing the efficiency of 18.7 % observed for OSCs incorporating thiophene-based small molecule as the third component. The investigations in this study underscore the excellence of EDOT as a building block for constructing conjugated materials with multiple conformation locks and high charge carrier mobilities, thereby contributing to elevated photovoltaic performance in OSCs.

Crossbreeding Effect of Chalcogenation and Iodination on Benzene Additives Enables Optimized Morphology and 19.68% Efficiency of Organic Solar Cells

Volatile solid additives have attracted increasing attention in optimizing the morphology and improving the performance of currently dominated non-fullerene acceptor-based organic solar cells (OSCs). However, the underlying principles governing the rational design of volatile solid additives remain elusive. Herein, a series of efficient volatile solid additives are successfully developed by the crossbreeding effect of chalcogenation and iodination for optimizing the morphology and improving the photovoltaic performances of OSCs. Five benzene derivatives of 1,4-dimethoxybenzene (DOB), 1-iodo-4-methoxybenzene (OIB), 1-iodo-4-methylthiobenzene (SIB), 1,4-dimethylthiobenzene (DSB) and 1,4-diiodobenzene (DIB) are systematically studied, where the widely used DIB is used as the reference. The effect of chalcogenation and iodination on the overall property is comprehensively investigated, which indicates that the versatile functional groups provided various types of noncovalent interactions with the host materials for modulating the morphology. Among them, SIB with the combination of sulphuration and iodination enabled more appropriate interactions with the host blend, giving rise to a highly ordered molecular packing and more favorable morphology. As a result, the binary OSCs based on PM6:L8-BO and PBTz-F:L8-BO as well as the ternary OSCs based on PBTz-F:PM6:L8-BO achieved impressive high PCEs of 18.87%, 18.81% and 19.68%, respectively, which are among the highest values for OSCs.

Dual Function of the Third Component in Ternary Organic Solar Cells: Broaden the Spectrum and Optimize the Morphology

Ternary organic solar cells (T-OSCs) have attracted significant attention as high-performance devices. In recent years, T-OSCs have achieved remarkable progress with power conversion efficiency (PCE) exceeding 19%. However, the introduction of the third component complicates the intermolecular interaction compared to the binary blend, resulting in poor controllability of active layer and limiting performance improvement. To address these issues, dual-functional third components have been developed that not only broaden the spectral range but also optimize morphology. In this review, the effect of the third component on expanding the absorption range of T-OSCs is first discussed. Second, the extra functions of the third component are introduced, including adjusting the crystallinity and molecular stack in active layer, regulating phase separation and purity, altering molecular orientation of the donor or acceptor. Finally, a summary of the current research progress is provided, followed by a discussion of future research directions.

Providing a Photovoltaic Performance Enhancement Relationship from Binary to Ternary Polymer Solar Cells via Machine Learning

Ternary polymer solar cells (PSCs) are currently the simplest and most efficient way to further improve the device performance in PSCs. To find high-performance organic photovoltaic materials, the established connection between the material structure and device performance before fabrication is of great significance. Herein, firstly, a database of the photovoltaic performance in 874 experimental PSCs reported in the literature is established, and three different fingerprint expressions of a molecular structure are explored as input features; the results show that long fingerprints of 2D atom pairs can contain more effective information and improve the accuracy of the models. Through supervised learning, five machine learning (ML) models were trained to build a mapping of the photovoltaic performance improvement relationship from binary to ternary PSCs. The GBDT model had the best predictive ability and generalization. Eighteen key structural features from a non-fullerene acceptor and the third components that affect the device's PCE were screened based on this model, including a nitrile group with lone-pair electron, a halogen atom, an oxygen atom, etc. Interestingly, the structural features for the enhanced device's PCE were essentially increased by the Jsc or FF. More importantly, the reliability of the ML model was further verified by preparing the highly efficient PSCs. Taking the PM6:BTP-eC9:PY-IT ternary PSC as an example, the PCE prediction (18.03%) by the model was in good agreement with the experimental results (17.78%), the relative prediction error was 1.41%, and the relative error between all experimental results and predicted results was less than 5%. These results indicate that ML is a useful tool for exploring the photovoltaic performance improvement of PSCs and accelerating the design and application with highly efficient non-fullerene materials.

Three-in-One Strategy Enables Single-Component Organic Solar Cells with Record Efficiency and High Stability

Single-component organic solar cells (SCOSCs) with covalently bonding donor and acceptor are becoming increasingly attractive because of their superior stability over traditional multicomponent blend organic solar cells (OSCs). Nevertheless, the efficiency of SCOSCs is far behind the state-of-the-art multicomponent OSCs. Herein, by combination of the advantages of three-component and single-component devices, this work reports an innovative three-in-one strategy to boost the performance of SCOSCs. In this three-in-one strategy, three independent components (PM6, D18, and PYIT) are covalently linked together to create a new single-component active layer based on ternary conjugated block copolymer (TCBC) PM6-D18-b-PYIT by a facile polymerization. Precisely manipulating the component ratios in the polymer chains of PM6-D18-b-PYIT is able to broaden light utilization, promote charge dynamics, optimize, and stabilize film morphology, contributing to the simultaneously enhanced efficiency and stability of the SCOSCs. Ultimately, the PM6-D18-b-PYIT-based device exhibits a power conversion efficiency (PCE) of 14.89%, which is the highest efficiency of the reported SCOSCs. Thanks to the aggregation restriction of each component and chain entanglement in the three-in-one system, the PM6-D18-b-PYIT-based SCOSC displays significantly higher stability than the corresponding two-component (PM6-D18:PYIT) and three-component (PM6:D18:PYIT). These results demonstrate that the three-in-one strategy is facile and promising for developing SCOSCs with superior efficiency and stability.

Understanding Causalities in Organic Photovoltaics Device Degradation in a Machine-Learning-Driven High-Throughput Platform

Organic solar cells (OSCs) now approach power conversion efficiencies of 20%. However, in order to enter mass markets, problems in upscaling and operational lifetime have to be solved, both concerning the connection between processing conditions and active layer morphology. Morphological studies supporting the development of structure-process-property relations are time-consuming, complex, and expensive to undergo and for which statistics, needed to assess significance, are difficult to be collected. This work demonstrates that causal relationships between processing conditions, morphology, and stability can be obtained in a high-throughput method by combining low-cost automated experiments with data-driven analysis methods. An automatic spectral modeling feeds parametrized absorption data into a feature selection technique that is combined with Gaussian process regression to quantify deterministic relationships linking morphological features and processing conditions with device functionality. The effect of the active layer thickness and the morphological order is further modeled by drift-diffusion simulations and returns valuable insight into the underlying mechanisms for improving device stability by tuning the microstructure morphology with versatile approaches. Predicting microstructural features as a function of processing parameters is decisive know-how for the large-scale production of OSCs.

What We have Learnt from PM6:Y6

Over the past three years, remarkable advancements in organic solar cells (OSCs) have emerged, propelled by the introduction of Y6-an innovative A-DA'D-A type small molecule non-fullerene acceptor (NFA). This review provides a critical discussion of the current knowledge about the structural and physical properties of the PM6:Y6 material combination in relation to its photovoltaic performance. The design principles of PM6 and Y6 are discussed, covering charge transfer, transport, and recombination mechanisms. Then, the authors delve into blend morphology and degradation mechanisms before considering commercialization. The current state of the art is presented, while also discussing unresolved contentious issues, such as the blend energetics, the pathways of free charge generation, and the role of triplet states in recombination. As such, this review aims to provide a comprehensive understanding of the PM6:Y6 material combination and its potential for further development in the field of organic solar cells. By addressing both the successes and challenges associated with this system, this review contributes to the ongoing research efforts toward achieving more efficient and stable organic solar cells.

A Three-Dimensional Non-Fullerene Acceptor with Contorted Hexabenzocoronene and Perylenediimide for Organic Solar Cells

Although fullerene derivatives such as [6,6]-phenyl-C61/C71-butyric acid methyl ester (PC61BM/PC71BM) have dominated the the photoactive acceptor materials in bulk heterojunction organic solar cells (OSCs) for decades, they have several drawbacks such as weak absorption, limited structural tunability, prone to aggregation, and high costs of production. Constructing non-fullerene small molecules with three-dimensional (3D) molecular geometry is one of the strategies to replace fullerenes in OSCs. In this study, a 3D molecule, contorted hexa-cata-hexabenzocoronene tetra perylenediimide (HBC-4-PDI), was designed and synthesized. HBC-4-PDI shows a wide and strong light absorption in the whole UV-vis region as well as suitable energy levels as an acceptor for OSCs. More importantly, the 3D construction effectively reduced the self-aggregation of c-HBC, leading to an appropriate scale phase separation of the blend film morphology in OSCs. A preliminary power conversion efficiency of 2.70 % with a champion open-circuit voltage of 1.06 V was obtained in OSCs with HBC-4-PDI as the acceptor, which was the highest among the previously reported OSCs based on c-HBC derivatives. The results indicated that HBC-4-PDI may serve as a good non-fullerene acceptor for OSCs.

Regulating Crystallinity Mismatch Between Donor and Acceptor to Improve Exciton/Charge Transport in Efficient Organic Solar Cells

Achieving a more balanced charge transport by morphological control is crucial in reducing bimolecular and trap-assisted recombination and enhancing the critical parameters for efficient organic solar cells (OSCs). Hence, a facile strategy is proposed to reduce the crystallinity difference between donor and acceptor by incorporating a novel multifunctional liquid crystal small molecule (LCSM) BDTPF4-C6 into the binary blend. BDTPF4-C6 is the first LCSM based on a tetrafluorobenzene unit and features a low liquid crystal phase transition temperature and strong self-assembly ability, conducive to regulating the active layer morphology. When BDTPF4-C6 is introduced as a guest molecule into the PM6 : Y6 binary, it exhibits better compatibility with the donor PM6 and primarily resides within the PM6 phase because of the similarity-intermiscibility principle. Moreover, systematic studies revealed that BDTPF4-C6 could be used as a seeding agent for PM6 to enhance its crystallinity, thereby forming a more balanced and favourable charge transport with suppressed charge recombination. Intriguingly, dual Förster resonance energy transfer was observed between the guest molecule and the host donor and acceptor, resulting in an improved current density. This study demonstrates a facile approach to balance the charge mobilities and offers new insights into boosting the efficiency of single-junction OSCs beyond 20 %.

Stability of organic solar cells: toward commercial applications

Organic solar cells (OSCs) have attracted a great deal of attention in the field of clean solar energy due to their advantages of transparency, flexibility, low cost and light weight. Introducing them to the market enables seamless integration into buildings and windows, while also supporting wearable, portable electronics and internet-of-things (IoT) devices. With the development of photovoltaic materials and the optimization of fabrication technology, the power conversion efficiencies (PCEs) of OSCs have rapidly improved and now exceed 20%. However, there is a significant lack of focus on material stability and device lifetime, causing a severe hindrance to commercial applications. In this review, we carefully review important strategies employed to improve the stability of OSCs over the past three years from the perspectives of material design and device engineering. Furthermore, we analyze and discuss the current important progress in terms of air, light, thermal and mechanical stability. Finally, we propose the future research directions to overcome the challenges in achieving highly stable OSCs. We expect that this review will contribute to solving the stability problem of OSCs, eventually paving the way for commercial applications in the near future.

Enhancing the Performance of Wide-Bandgap Polymer-Based Organic Solar Cells through Silver Nanorod Integration

Light trapping induced by the introduction of metallic nanoparticles has been shown to improve photo absorption in organic solar cells (OSCs). Researchers in the fields of plasmonics and organic photovoltaics work together to boost sunlight absorption and photon-electron interactions in order to improve device performance. In this contribution, an inverted OSC was fabricated by using indacenodithieno[3,2-b]thiophene-alt-2,2'-bithiazole (PIDTT-BTz) as a wide-band gap donor copolymer and (6,6)-phenyl-C71-butyric acid methyl ester (PC71BM) as an acceptor. Silver nanorods (Ag-NRs), synthesized by precipitation method, were embedded in the active layer of the solar cell. The device fabricated with 1 wt % Ag-NRs in the active layer showed a 26% improvement in power conversion efficiency (PCE) when exposed to 100 mW/cm2 simulated solar illumination. The role of Ag-NRs in the performance improvement of the OSCs was analyzed systematically using morphological, electrical, and optical characterization methods. The light trapping and exciton generation were improved due to the localized surface plasmon resonance (LSPR) activated in Ag-NRs in the form of longitudinal and transverse modes. The photoactive layers (PIDTT-BTz:PC71BM) with the incorporation of 0.5 and 1 wt % Ag-NR showed increased absorption, while the absorption with 1.5 wt % Ag-NRs appeared to be reduced in the wavelength range from 400 to 580 nm. Ag-NRs play a favorable role in exciton photogeneration and dissociation due to the two LSPR modes generated by the Ag-NRs. In the optimized device, the short-circuit current density (JSC) increased from 11.92 to 14.25 mA/cm2, resulting in an increase in the PCE from 3.94 to 4.93%, which is attributed to the improved light-trapping by LSPR using Ag-NRs.

Morphology Control for Efficient Nonfused Acceptor-Based Organic Photovoltaic Cells

Non-fused electron acceptors have huge advantages in fabricating low-cost organic photovoltaic (OPV) cells. However, morphology control is a challenge as non-fused C─C single bonds bring more molecular conformations. Here, by selecting two typical polymer donors, PBDB-TF and PBQx-TF, the blend morphologies and its impacts on the power conversion efficiencies (PCEs) of non-fused acceptor-based OPV cells are studied. A selenium-containing non-fused acceptor named ASe-5 is designed. The results suggest that PBQx-TF has a lower miscibility with ASe-5 when compared with PBDB-TF. Additionally, the polymer networks may form earlier in the PBQx-TF:ASe-5 blend film due to stronger preaggregation performance, leading to a more obvious phase separation. The PBQx-TF:ASe-5 blend film shows faster charge transfer and suppressed charge recombination. As a result, the PBQx-TF:ASe-5-based device records a good PCE of 14.7% with a higher fill factor (FF) of 0.744, while the PBDB-TF:ASe-5-based device only obtains a moderate PCE of 12.3% with a relatively low FF of 0.662. The work demonstrates that the selection of donors plays a crucial role in controlling the blend morphology and thus improving the PCEs of non-fused acceptor-based OPV cells.

Organic Photovoltaic Stability: Understanding the Role of Engineering Exciton and Charge Carrier Dynamics from Recent Progress

Benefiting from the synergistic development of material design, device engineering, and the mechanistic understanding of device physics, the certified power conversion efficiencies (PCEs) of single-junction non-fullerene organic solar cells (OSCs) have already reached a very high value of exceeding 19%. However, in addition to PCEs, the poor stability is now a challenging obstacle for commercial applications of organic photovoltaics (OPVs). Herein, recent progress made in exploring operational mechanisms, anomalous photoelectric behaviors, and improving long-term stability in non-fullerene OSCs are highlighted from a novel and previously largely undiscussed perspective of engineering exciton and charge carrier pathways. Considering the intrinsic connection among multiple temporal-scale photocarrier dynamics, multi-length scale morphologies, and photovoltaic performance in OPVs, this review delineates and establishes a comprehensive and in-depth property-function relationship for evaluating the actual device stability. Moreover, this review has also provided some valuable photophysical insights into employing the advanced characterization techniques such as transient absorption spectroscopy and time-resolved fluorescence imagings. Finally, some of the remaining major challenges related to this topic are proposed toward the further advances of enhancing long-term operational stability in non-fullerene OSCs.

18.6% Efficiency All-Polymer Solar Cells Enabled by a Wide Bandgap Polymer Donor Based on Benzo[1,2-d:4,5-d']bisthiazole

The limited selection of wide bandgap polymer donors for all-polymer solar cells (all-PSCs) is a bottleneck problem restricting their further development and remains poorly studied. Herein, a new wide bandgap polymer, namely PBBTz-Cl, is designed and synthesized by bridging the benzobisthiazole acceptor block and chlorinated benzodithiophene donor block with thiophene units for application as an electron donor in all-PSCs. PBBTz-Cl not only possesses wide bandgap and deep energy levels but also displays strong absorption, high-planar structure, and good crystallinity, making it a promising candidate for application as a polymer donor in organic solar cells. When paired with the narrow bandgap polymer acceptor PY-IT, a fibril-like morphology forms, which facilitates exciton dissociation and charge transport, contributing to a power conversion efficiency (PCE) of 17.15% of the corresponding all-PSCs. Moreover, when introducing another crystalline polymer acceptor BTP-2T2F into the PBBTz-Cl:PY-IT host blend, the absorption ditch in the range of 600-750 nm is filled, and the blend morphology is further optimized with the trap density reducing. As a result, the ternary blend all-PSCs achieve a significantly improved PCE of 18.60%, which is among the highest values for all-PSCs to date.

Over 18% Efficiency Ternary Organic Solar Cells with 300 nm Thick Active Layer Enabled by an Oligomeric Acceptor

The development of high-efficiency thickness-insensitive organic solar cells (OSCs) is crucially important for the mass production of solar panels. However, increasing the active layer thickness usually induces a substantial loss in efficiency. Herein, a ternary strategy in which an oligomer DY-TF is incorporated into PM6:L8-BO system as a guest component is adopted to break this dilemma. The S···F intramolecular noncovalent interactions in the backbone endow DY-TF with a high planarity. Upon the addition of DY-TF, the crystallinity of the blend is effectively improved, leading to increased charge carrier mobility, which is highly desirable in the fabrication of thick-film devices. As a result, thin-film PM6:L8-BO:DY-TF-based device (110 nm) shows a power conversion efficiency (PCE) of 19.13%. Impressively, when the active layer thickness increases to 300 nm, an efficiency of 18.23% (certified as 17.8%) is achieved, representing the highest efficiency reported for 300 nm thick OSCs thus far. Additionally, blade-coated thick device (300 nm) delivers a promising PCE of 17.38%. This work brings new insights into the construction of efficient OSCs with high thickness tolerance, showing great potential for roll-to-roll printing of large-area solar cells.

Embedded Host/Guest Alloy Aggregations Enable High-Performance Ternary Organic Photovoltaics

The ternary strategy has been intensively studied to improve the power conversion efficiencies of organic photovoltaics. Thereinto, the location of the guest component plays a critical role, but few reports have been devoted to this concern. Hereon, the distribution of LA1 as a guest acceptor in a variety of ternary scenarios is reported and the dominating driving forces of managing the guest distribution and operating modes are outlined. Governed by the appropriate relationship of compatibility, crystallinity, and surface energies between host and guest acceptors, as well as interfacial interactions between donor and dual acceptors, most of the LA1 molecules permeate into the internal of host acceptor phases, forming embedded host/guest alloy-like aggregations. The characteristic distributions greatly optimize the morphologies, maximize energy transfer, and enhance exciton/charge behaviors. Particularly, PM6:IT-4F:LA1 ternary cells afford high efficiency of 15.27% with impressive fill factors (FF) over 81%. The popularization studies further verify the superiority of the LA1-involved alloy structures, and with the Y6-family acceptor as the host component, an outstanding efficiency of 19.17% is received. The results highlight the importance of guest distribution in ternary systems and shed light on the governing factors of distributing the guests in ternary cells.

Study of Tunable Dielectric Permittivity of PBDB-T-2CL Polymer in Ternary Organic Blend Thin Films Using Spectroscopic Ellipsometry

The ellipsometric analyses reported in this paper present a novelty by bringing an in-depth optical investigation of some ternary organic blends. This study focuses on the tunability and control of the relative permittivity of active layers by varying the weight ratio of blended materials spin-coated as thin films. To investigate this, an extensive approach based on spectroscopic ellipsometry was conducted on ternary blend (D:A1:A2) thin films, involving a donor [D = chlorinated conjugated polymer (PBDB-T-2Cl)] and two acceptor materials [A1 = a non-fullerene (ITIC-F) and A2 = a fullerene (PCBM)]. The refractive index constitutes a key parameter that exposes insights into the feasibility of photovoltaic cells by predicting the trajectory of light as it transits the device. In this term, higher obtained refractive indexes support higher absorption coefficients. Notably, the dielectric constant can be rigorously tuned and finely calibrated by modest variations in the quantity of the third element, resulting in considerable modifications. Moreover, the inclusion of fullerene in blends, as the third element, results in a smooth topographical profile, further refining the surface of the film. From an electrical point of view, the ternary blends outperform the polymer thin films. The synergistic interaction of constituents emphasizes their potential to enhance solar conversion devices.

Benzo[d]thiazole Based Wide Bandgap Donor Polymers Enable 19.54% Efficiency Organic Solar Cells Along with Desirable Batch-to-Batch Reproducibility and General Applicability

The limited selection pool of high-performance wide bandgap (WBG) polymer donors is a bottleneck problem of the nonfullerene acceptor (NFA) based organic solar cells (OSCs) that impedes the further improvement of their photovoltaic performances. Herein, a series of new WBG polymers, namely PH-BTz, PS-BTz, PF-BTz, and PCl-BTz, are developed by using the bicyclic difluoro-benzo[d]thiazole (BTz) as the acceptor block and benzo[1,2-b:4,5-b']dithiophene (BDT) derivatives as the donor units. By introducing S, F, and Cl atoms to the alkylthienyl sidechains on BDT, the resulting polymers exhibit lowered energy levels and enhanced aggregation properties. The fluorinated PBTz-F not only exhibits a low-lying HOMO level, but also has stronger face-on packing order and results in more uniform fibril-like interpenetrating networks in the related PF-BTz:L8-BO blend. A high-power conversion efficiency (PCE) of 18.57% is achieved. Moreover, PBTz-F also exhibits a good batch-to-batch reproducibility and general applicability. In addition, ternary blend OSCs based on the host PBTz-F:L8-BO blend and PM6 guest donor exhibits a further enhanced PCE of 19.54%, which is among the highest values of OSCs.

Enhanced Efficiency and Stability of Novel Pseudo-ternary Polymer Solar Cells Enabled by a Conjugated Donor Block Copolymer

The recent breakthrough in power conversion efficiencies (PCEs) of polymer solar cells (PSCs) that contain an active layer of a ternary system has achieved values of 18-19%; this has sparked interest for further research. However, this system has difficulties in optimizing the composition and controlling the interaction between the three active materials. In this study, we investigated the use of a donor₁ (D₁)-donor₂ (D₂) conjugated block copolymer (CBP), PM6-b-TT, to replace the physical blend of two donors. PM6-b-TT, which exhibits an extended absorption range, was synthesized by covalently bonding PM6, a medium-band gap polymer, with PBDT-TT, a wide-band gap polymer. The blend films containing PM6-b-TT and Y6-BO acceptor, demonstrated excellent crystallinity and a film morphology favorable for PSCs. The corresponding pseudo-ternary PSC exhibited significantly higher PCE and thermal stability than the PM6:PBDT-TT-based ternary device. This study unambiguously demonstrates that the novel D₁-D₂ CBP strategy, combined with the conventional binary and ternary system advantages, is a promising material production strategy that can boost the performance of future PSCs.

Coherent Vibronic Wavepackets Show Structure-Directed Charge Flow in Host-Guest Donor-Acceptor Complexes

Designing and controlling charge transfer (CT) pathways in organic semiconductors are important for solar energy applications. To be useful, a photogenerated, Coulombically bound CT exciton must further separate into free charge carriers; direct observations of the detailed CT relaxation pathways, however, are lacking. Here, photoinduced CT and relaxation dynamics in three host-guest complexes, where a perylene (Per) electron donor guest is incorporated into two symmetric and one asymmetric extended viologen cyclophane acceptor hosts, are presented. The central ring in the extended viologen is either p-phenylene (ExV²⁺) or electron-rich 2,5-dimethoxy-p-phenylene (ExMeOV²⁺), resulting in two symmetric cyclophanes with unsubstituted or methoxy-substituted central rings, ExBox⁴⁺ and ExMeOBox⁴⁺, respectively, and an asymmetric cyclophane with one of the central viologen rings being methoxylated ExMeOVBox⁴⁺. Upon photoexcitation, the asymmetric host-guest ExMeOVBox⁴⁺ ⊃ Per complex exhibits directional CT toward the energetically unfavorable methoxylated side due to structural restrictions that facilitate strong interactions between the Per donor and the ExMeOV²⁺ side. The CT state relaxation pathways are probed using ultrafast optical spectroscopy by focusing on coherent vibronic wavepackets, which are used to identify CT relaxations along charge localization and vibronic decoherence coordinates. Specific low- and high-frequency nuclear motions are direct indicators of a delocalized CT state and the degree of CT character. Our results show that the CT pathway can be controlled by subtle chemical modifications of the acceptor host in addition to illustrating how coherent vibronic wavepackets can be used to probe the nature and time evolution of the CT states.

BN-Bond-Embedded Triplet Terpolymers with Small Singlet-Triplet Energy Gaps for Suppressing Non-Radiative Recombination and Improving Blend Morphology in Organic Solar Cells

Suppressing the photon energy loss (E_loss ), especially the non-radiative loss, is of importance to further improve the device performance of organic solar cells (OSCs). However, typical π-conjugated semiconductors possess a large singlet-triplet energy gap (ΔE_ST ), leading to a lower triplet state than charge transfer state and contributing to a non-radiative loss channel of the photocurrent by the triplet state. Herein, a series of triplet polymer donors are developed by introducing a BNIDT block into the PM6 polymer backbone. The high electron affinity of BNIDT and the opposite resonance effect of the BN bond in BNIDT results in a lowered highest occupied molecular orbital (HOMO) and a largely reduced ΔE_ST . Moreover, the morphology of the active blends is also optimized by fine-tuning the BNIDT content. Therefore, non-radiative recombination via the terminal triplet loss channels and morphology traps is effectively suppressed. The PNB-3 (with 3% BNIDT):L8-BO device exhibits both small ΔE_ST and optimized morphology, favoring more efficient charge transfer and transport. Finally, the simultaneously enhanced V_oc of 0.907 V, J_sc of 26.59 mA cm^-2 , and FF of 78.86% contribute to a champion PCE of 19.02%. Therefore, introducing BN bonds into benchmark polymers is a possible avenue toward higher-performance of OSCs.

Sequential Deposition of Multicomponent Bulk Heterojunctions Increases Efficiency of Organic Solar Cells

Constructing tandem and multi-blend organic solar cells (OSCs) is an effective way to overcome the absorption limitations of conventional single-junction devices. However, these methods inevitably require tedious multilayer deposition or complicated morphology-optimization procedures. Herein, sequential deposition is utilized as an effective and simple method to fabricate multicomponent OSCs with a double-bulk heterojunction (BHJ) structure of the active layer to further improve photovoltaic performance. Two efficient donor-acceptor pairs, D18-Cl:BTP-eC9 and PM6:L8-BO, are sequentially deposited to form the D18-Cl:BTP-eC9/PM6:L8-BO double-BHJ active layer. In these double-BHJ OSCs, light absorption is significantly improved, and optimal morphology is also retained without requiring a more complicated morphology optimization involved in quaternary blends. Compared to the quaternary blend devices, energy loss (E_loss ) is also reduced by rationally matching each donor with an appropriate acceptor. Consequently, the power conversion efficiency (PCE) is improved from 18.25% for D18-Cl:BTP-eC9 and 18.69% for PM6:L8-BO based binary blend OSCs to 19.61% for the double-BHJ OSCs. In contrast, a D18-Cl:PM6:L8-BO:BTP-eC9 quaternary blend of OSCs exhibited a dramatically reduced PCE of 15.83%. These results demonstrate that a double-BHJ strategy, with a relatively simple processing procedure, can potentially enhance the device performance of OSCs and lead to more widespread use.

Hybrid Cycloalkyl-Alkyl Chain-Based Symmetric/Asymmetric Acceptors with Optimized Crystal Packing and Interfacial Exciton Properties for Efficient Organic Solar Cells

Hybrid cycloalkyl-alkyl side chains are considered a unique composite side-chain system for the construction of novel organic semiconductor materials. However, there is a lack of fundamental understanding of the variations in the single-crystal structures as well as the optoelectronic and energetic properties generated by the introduction of hybrid side chains in electron acceptors. Herein, symmetric/asymmetric acceptors (Y-C10ch and A-C10ch) bearing bilateral and unilateral 10-cyclohexyldecyl are designed, synthesized, and compared with the symmetric acceptor 2,2'-((2Z,2'Z)-((12,13-bis(2-butyloctyl)-3,9 bis(ethylhexyl)-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″':4',5']thieno[2',3':4,5] pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10- diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (L8-BO). The stepwise introduction of 10-cyclohexyldecyl side chains decreases the optical bandgap, deepens the energy level, and enables the acceptor molecules to pack closely in a regular manner. Crystallographic analysis demonstrates that the 10-cyclohexyldecyl chain endows the acceptor with a more planar skeleton and enforces more compact 3D network packing, resulting in an active layer with higher domain purity. Moreover, the 10-cyclohexyldecyl chain affects the donor/acceptor interfacial energetics and accelerates exciton dissociation, enabling a power conversion efficiency (PCE) of >18% in the 2,2'-((2Z,2'Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″':4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (Y6) (PM6):A-C10ch-based organic solar cells (OSCs). Importantly, the incorporation of Y-C10ch as the third component of the PM6:L8-BO blend results in a higher PCE of 19.1%. The superior molecular packing behavior of the 10-cyclohexyldecyl side chain is highlighted here for the fabrication of high-performance OSCs.

19.10% Efficiency and 80.5% Fill Factor Layer-by-Layer Organic Solar Cells Realized by 4-Bis(2-Thienyl)Pyrrole-2,5-Dione Based Polymer Additives for Inducing Vertical Segregation Morphology

The morphology plays a key role in determining the charge generation and collection process, thus impacting the performances of organic solar cells (OSCs). The limited selection pool of additives to optimize the morphology of OSCs, especially for the emerging layer-by-layer (LbL) OSCs, impeding the improvements of photovoltaic performances. Herein, a new method of using conjugated polymers as the additives to optimize the morphology for improving the photovoltaic performances of LbL-OSCs is reported. Four polymers of PH, PS, PF, and PCl are developed with different side chains. These polymers exhibit poor performances as donor materials and additives in the BHJ devices, due to the unsuitable energy level alignment and unfavorable molecular interactions. By contrast, they can be served as efficient additives to optimize the PM6 fibril matrix for facilitating the penetration of BTP-eC9 and forming an intertwined D/A bicontinuous network with a vertical segregation. Such morphology is optimized by side chain engineering, which enables the progressive improvement of the charge separation and collection. As a result, adding a small amount of PCl as the additive, the optimized morphology contributes to a champion PCE of 19.10% with a high FF of 80.5%.

Optical interference on the measurement of film-depth-dependent light absorption spectroscopy and a correction approach

Organic thin films usually feature vertical phase segregation, and film-depth-dependent light absorption spectroscopy is an emerging characterization method to study the vertical phase separation of active layer films in organic electronics field. However, the interference effects on thin films can lead to optical errors in their characterization results. In this work, the interference effects on fluctuations of peak intensity and peak position of film-depth-dependent light absorption spectroscopy are investigated. Subsequently, a numerical method based on inverse transfer matrix is proposed to obtain the optical constants of the active layer through the film-depth-dependent light absorption spectroscopy. The extinction coefficient error in the non-absorbing wavelength range caused by interference effect is reduced by ∼95% compared with the traditional film-depth-dependent light absorption spectroscopy measurement. Thus, the optical properties of the thin film and quantitative spectrographic analysis based on these optical constants largely avoid the effects of interference including fluctuations of peak intensity and peak position. It is concluded that for many morphologically homogenously films, the spatial (film-depth) resolution of this film-depth-dependent light absorption spectroscopy can be optimized to be <1 nm. Subsequently, this modified film-depth-dependent light absorption spectroscopy approach is employed to simulate the local optical properties within devices with a multilayer architecture.

A Polyfluoroalkyl-Containing Non-fullerene Acceptor Enables Self-Stratification in Organic Solar Cells

The elaborate control of the vertical phase distribution within an active layer is critical to ensuring the high performance of organic solar cells (OSCs), but is challenging. Herein, a self-stratification active layer is realised by adding a novel polyfluoroalkyl-containing non-fullerene small-molecule acceptor (NFSMA), EH-C₈ F₁₇ , as the guest into PM6:BTP-eC9 blend. A favourable vertical morphology was obtained with an upper acceptor-enriched thin layer and a lower undisturbed bulk heterojunction layer. Consequently, a power conversion efficiency of 18.03 % was achieved, higher than the efficiency of 17.40 % for the device without EH-C₈ F₁₇ . Additionally, benefiting from the improved charge transport and collection realised by this self-stratification strategy, the OSC with a thickness of 350 nm had an impressive PCE of 16.89 %. The results of the study indicate that polyfluoroalkyl-containing NFSMA-assisted self-stratification within the active layer is effective for realising an ideal morphology for high-performance OSCs.

Multiphase Morphology with Enhanced Carrier Lifetime via Quaternary Strategy Enables High-Efficiency, Thick-Film, and Large-Area Organic Photovoltaics

With the continuous breakthrough of the efficiency of organic photovoltaics (OPVs), their practical applications are on the agenda. However, the thickness tolerance and upscaling in recently reported high-efficiency devices remains challenging. In this work, the multiphase morphology and desired carrier behaviors are realized by utilizing a quaternary strategy. Notably, the exciton separation, carrier mobility, and carrier lifetime are enhanced significantly, the carrier recombination and the energy loss (E_loss ) are reduced, thus beneficial for a higher short-circuit density (J_SC ), fill factor (FF), and open-circuit voltage (V_OC ) of the quaternary system. Moreover, the intermixing-phase size is optimized, which is favorable for constructing the thick-film and large-area devices. Finally, the device with a 110 nm-thick active layer shows an outstanding power conversion efficiency (PCE) of 19.32% (certified 19.35%). Furthermore, the large-area (1.05 and 72.25 cm² ) devices with 110 nm thickness present PCEs of 18.25% and 12.20%, and the device with a 305 nm-thick film (0.0473 cm² ) delivers a PCE of 17.55%, which are among the highest values reported. The work demonstrates the potential of the quaternary strategy for large-area and thick-film OPVs and promotes the practical application of OPVs in the future.

Balancing the Selective Absorption and Photon-to-Electron Conversion for Semitransparent Organic Photovoltaics with 5.0% Light-Utilization Efficiency

Efficiently converting invisible light while allowing full visible light transmission is key to achieving high-performance semitransparent organic photovoltaics (ST-OPVs). Here, a detailed balance strategy is explored to optimize the ST-OPV via taking both absorption and carrier dynamics into consideration. Based on this principle, comprehensive optimizations are carried out, including a ternary strategy, donor:acceptor blend ratio, thickness, antireflection, etc., to compromise the invisible energy conversion and visible transmission for high-performance ST-OPVs. As a result, the opaque OPV device exhibits a champion power conversion efficiency of 19.35% (certificated 19.07%), and most strikingly, the best ST-OPV shows a remarkably high light-utilization efficiency of 5.0%, where the efficiency and the average visible transmission are 12.95% and 38.67%, respectively. An efficiency of 12.09% is achieved on the upscaled device with an area of 1.05 cm² , demonstrating its promise for large-area fabrication. These results are among the best values for ST-OPVs. Besides, it is demonstrated that the ST-OPV exhibits good infrared light-reflection capability for thermal control. This work provides a rational design of balancing the absorbing selectivity and photon-to-electron conversion for high-performance ST-OPVs, and may pave the way toward the practical application of solar windows.

Efficient All-Polymer Solar Cells Enabled by Interface Engineering

All-polymer solar cells (all-PSCs) are organic solar cells in which both the electron donor and the acceptor are polymers and are considered more promising in large-scale production. Thanks to the polymerizing small molecule acceptor strategy, the power conversion efficiency of all-PSCs has ushered in a leap in recent years. However, due to the electrical properties of polymerized small-molecule acceptors (PSMAs), the FF of the devices is generally not high. The typical electron transport material widely used in these devices is PNDIT-F3N, and it is a common strategy to improve the device fill factor (FF) through interface engineering. This work improves the efficiency of all-polymer solar cells through interfacial layer engineering. Using PDINN as the electron transport layer, we boost the FF of the devices from 69.21% to 72.05% and the power conversion efficiency (PCE) from 15.47% to 16.41%. This is the highest efficiency for a PY-IT-based binary all-polymer solar cell. This improvement is demonstrated in different all-polymer material systems.