Chiral Rashba Ferroelectrics for Circularly Polarized Light Detection

Magneto-chiral Nonlinear Optical Effect with Large Anisotropic Response in Two-Dimensional Halide Perovskite

The chiral organic-inorganic halide perovskites (OIHPs) are vital candidates for superior nonlinear optical (NLO) effects associated with circularly polarized (CP) light. NLO in chiral materials often couples with magnetic dipole (MD) transition, as well as the conventional electric dipole (ED) transition. However, the importance of MD transition in NLO process of chiral OIHPs has not yet been well recognized. Here, the circular polarized probe analysis of second harmonic generation circular dichroism (SHG-CD) provides the direct evidence that the contribution of MD leads to a large anisotropic response to CP lights in chiral OIHPs, (R-/S-MBACl)2PbI4. The thin films exhibit great sensitivity to CP lights over a wide wavelength range, and the g-value reaches up to 1.57 at the wavelength where the contribution of MD is maximized. Furthermore, it is also effective as CP light generator, outputting CP-SHG with maximum g-factor of 1.76 upon the stimulation of linearly polarized light. This study deepens the understanding of relation between chirality and magneto-optical effect, and such an efficient discrimination and generation of CP light signal is highly applicable for chirality-based sensor and optical communication devices.

Phase Transition and Luminescent Property Change Induced by Different Organic Cations in One-Dimensional Double Perovskites

Double perovskites (DPs) have attracted attention in the field of luminescence due to their inherent broadband emission of self-trapping excitons. In this work, we choose [(CH3)3NCH2CHCH2]+ and [CH3CHOHCH2NH2]+ as organic cations to synthesize two new organic-inorganic hybrid DPs, [(CH3)3NCH2CHCH2]2KInCl6 (1) and [CH3CHOHCH2NH2]2KInCl6 (2). The [KCl6]3- and [InCl6]3- octahedra are interchangeably connected by sharing two opposite faces, forming a one-dimensional coordination chain. Each K atom coordinates with six chlorine atoms in 1, while it coordinates with two oxygen atoms in addition to the six chlorine atoms in 2. The coordination between ions K and O in compound 2 may have significantly reduced its luminescence. As a result, compound 1 shows bright-yellow light with a quantum yield of more than 90%, while 2 shows weak blue light with a quantum yield of only 0.98%. In addition, different from no phase transition found in 2, 1 undergoes a reversible phase transition at 324/307 K in the heating-cooling cycle. Through structural and spectral analysis and density functional theory calculation, we conclude that the larger degree of [InCl6]3- octahedral distortion and the larger anion distance (In···In) also cause the PLQY of compound 1 to be higher than that of compound 2.

A Lead-Free Ferroelectric 2D Dion-Jacobson Tin Iodide Perovskite

2D hybrid organic-inorganic halide perovskites emerge as a new class of 2D semiconductors with the potential to combine excellent optoelectronic properties with symmetry-enabled properties such as ferroelectricity. Although many lead-based ferroelectric 2D halide perovskites are reported, there is yet to be a conclusive report of ferroelectricity in tin-based 2D perovskites. Here, the structures and properties of a new series of 2D Dion-Jacobson (DJ) Sn perovskites: (4AMP)SnI4, (4AMP)(MA)Sn2I7, and (4AMP)(FA)Sn2I7 (4AMP = 4-(aminomethyl)piperidinium, MA = methylammonium, and FA = formamidinium), are reported. Structural characterization reveals that (4AMP)SnI4 is polar with in-plane spontaneous polarization whereas (4AMP)(MA)Sn2I7 and (4AMP)(FA)Sn2I7 are centrosymmetric. Further, (4AMP)SnI4 displays second harmonic generation (SHG) and polarization-electric field hysteresis measurements confirm it is ferroelectric with a spontaneous polarization of 10.0 µC cm-2 at room temperature. (4AMP)SnI4 transitions into a centrosymmetric structure above 367 K. As the first direct experimental observation of the spontaneous ferroelectric polarization of a Sn-based 2D hybrid perovskite, this work opens up environmentally friendly 2D tin halide perovskites for ferroelectricity and other physical property studies.

Structure-Guided Approaches for Enhanced Spin-Splitting in Chiral Perovskite

Hybrid organic-inorganic perovskites with diverse lattice structures and chemical composition provide an ideal material platform for novel functionalization, including chirality transfer. Chiral perovskites combine organic and inorganic sublattices, therefore encoding the structural asymmetry into the electronic structures and giving rise to the spin-splitting effect. From a structural chemistry perspective, the magnitude of the spin-splitting effect crucially depends on the noncovalent and electrostatic interaction within the chiral perovskite, which induces the local site and long-range bulk inversion symmetry breaking. In this regard, we systematically retrospect the structure-property relationships in chiral perovskite. Insight into the rational design of chiral perovskites based on molecular configuration, dimensionality, and chemical composition along with their effects on spin-splitting manifestation is presented. Lastly, challenges in purposeful material design and further integration into chiral perovskite-based spintronic devices are outlined. With an understanding of fundamental chemistry and physics, we believe that this Perspective will propel the application of multifunctional spintronic devices.

Research Progress on Rashba Effect in Two-Dimensional Organic-Inorganic Hybrid Lead Halide Perovskites

The Rashba effect appears in the semiconductors with an inversion-asymmetric structure and strong spin-orbit coupling, which splits the spin-degenerated band into two sub-bands with opposite spin states. The Rashba effect can not only be used to regulate carrier relaxations, thereby improving the performance of photoelectric devices, but also used to expand the applications of semiconductors in spintronics. In this mini-review, recent research progress on the Rashba effect of two-dimensional (2D) organic-inorganic hybrid perovskites is summarized. The origin and magnitude of Rashba spin splitting, layer-dependent Rashba band splitting of 2D perovskites, the Rashba effect in 2D perovskite quantum dots, a 2D/3D perovskite composite, and 2D-perovskites-based van der Waals heterostructures are discussed. Moreover, applications of the 2D Rashba effect in circularly polarized light detection are reviewed. Finally, future research to modulate the Rashba strength in 2D perovskites is prospected, which is conceived to promote the optoelectronic and spintronic applications of 2D perovskites.

Polar Aromatic Two-dimensional Dion-Jacobson Halide Perovskites for Efficient Photocatalytic H2 Evolution

Polar materials with spontaneous polarization (Ps) have emerged as highly promising photocatalysts for efficient photocatalytic H2 evolution owing to the Ps-enhanced photogenerated carrier separation. However, traditional inorganic polar materials often suffer from limitations such as wide band gaps and poor carrier transport, which hinders their photocatalytic H2 evolution efficiency. Here, we rationally synthesized a series of isostructural two-dimensional (2D) aromatic Dion-Jacobson (DJ) perovskites, namely (2-(2-Aminoethyl)pyridinium)PbI4 (2-APDPI), (3-(2-Aminoethyl)pyridinium)PbI4 (3-APDPI), and (4-(2-Aminoethyl)pyridinium)PbI4 (4-APDPI), where 2-APDPI and 4-APDPI crystalize in polar space groups with piezoelectric constants (d33) of approximately 40 pm V-1 and 3-APDPI adopts a centrosymmetric structure. Strikingly, owing to the Ps-facilitated separation of photogenerated carriers, polar 2-APDPI and 4-APDPI exhibit a 3.9- and 2.8-fold increase, respectively, in photocatalytic H2 evolution compared to the centrosymmetric 3-APDPI. As a pioneering study, this work provides an efficient approach for exploring new polar photocatalysts and highlights their potential in promoting photocatalytic H2 evolution.

Rational Design of 2D Metal Halide Perovskites with Low Congruent Melting Temperature and Large Melt-Processable Window

Metal halide perovskites (MHPs) have garnered significant attention due to their distinctive optical and electronic properties, coupled with excellent processability. However, the thermal characteristics of these materials are often overlooked, which can be harnessed to cater to diverse application scenarios. We showcase the efficacy of lowering the congruent melting temperature (Tm) of layered 2D MHPs by employing a strategy that involves the modification of flexible alkylammonium through N-methylation and I-substitution. Structural-property analysis reveals that the N-methylation and I-substitution play pivotal roles in reducing hydrogen bond interactions between the organic components and inorganic parts, lowering the rotational symmetry number of the cation and restricting the residual motion of the cations. Additional I···I interactions enhance intermolecular interactions and lead to improved molten stability, as evidenced by a higher viscosity. The 2D MHPs discussed in this study exhibit low Tm and wide melt-processable windows, e.g., (DMIPA)2PbI4 showcasing a low Tm of 98 °C and large melt-processable window of 145 °C. The efficacy of the strategy was further validated when applied to bromine-substituted 2D MHPs. Lowering the Tm and enhancing the molten stability of the MHPs hold great promise for various applications, including glass formation, preparation of high-quality films for photodetection, and fabrication of flexible devices.

Room-Temperature Anisotropic Actuation Driven by a Synergistic Order-Disorder and Displacive Phase Transition in a Ferroelectric Crystal

Actuating materials convert different forms of energy into mechanical responses. To satisfy various application scenarios, they are desired to have rich categories, novel functionalities, clear structure-property relationships, fast responses, and, in particular, giant and reversible shape changes. Herein, we report a phase transition-driven ferroelectric crystal, (rac-3-HOPD)PbI3 (3-HOPD = 3-hydroxypiperidine cation), showing intriguingly large and anisotropic room-temperature actuating behaviors. The crystal consists of rigid one-dimensional [PbI3] anionic chains running along the a-axis and discrete disk-like cations loosely wrapping around the chains, leaving room for anisotropic shape changes in both the b- and c-axes. The shape change is switched by a ferroelectric phase transition occurring at around room temperature (294 K), driven by the exceptionally synergistic order-disorder and displacive phase transition. The rotation of the cations exerts internal pressure on the stacking structure to trigger an exceptionally large displacement of the inorganic chains, corresponding to a crystal lattice transformation with length changes of +24.6% and -17.5% along the b- and c-axis, respectively. Single crystal-based prototype devices of circuit switches and elevators have been fabricated by exploiting the unconventional negative temperature-dependent actuating behaviors. This work provides a new model for the development of multifunctional mechanically responsive materials.

Multi-stimuli-responsive luminescence enabled by crown ether anchored chiral antimony halide phosphors

Stimuli-responsive optical materials have provided a powerful impetus for the development of intelligent optoelectronic devices. The family of organic-inorganic hybrid metal halides, distinguished by their structural diversity, presents a prospective platform for the advancement of stimuli-responsive optical materials. Here, we have employed a crown ether to anchor the A-site cation of a chiral antimony halide, enabling convenient control and modulation of its photophysical properties. The chirality-dependent asymmetric lattice distortion of inorganic skeletons assisted by a crown ether promotes the formation of self-trapped excitons (STEs), leading to a high photoluminescence quantum yield of over 85%, concomitant with the effective circularly polarized luminescence. The antimony halide enantiomers showcase highly sensitive stimuli-responsive luminescent behaviours towards excitation wavelength and temperature simultaneously, exhibiting a versatile reversible colour switching capability from blue to white and further to orange. In situ temperature-dependent luminescence spectra, time-resolved luminescence spectra and theoretical calculations reveal that the multi-stimuli-responsive luminescent behaviours stem from distinct STEs within zero-dimensional lattices. By virtue of the inherent flexibility and adaptability, these chiral antimony chlorides have promising prospects for future applications in cutting-edge fields such as multifunctional illumination technologies and intelligent sensing devices.

Tuning ferroelectric phase transition temperature by enantiomer fraction

Tuning phase transition temperature is one of the central issues in phase transition materials. Herein, we report a case study of using enantiomer fraction engineering as a promising strategy to tune the Curie temperature (TC) and related properties of ferroelectrics. A series of metal-halide perovskite ferroelectrics (S-3AMP)x(R-3AMP)1-xPbBr4 was synthesized where 3AMP is the 3-(aminomethyl)piperidine divalent cation and enantiomer fraction x varies between 0 and 1 (0 and 1 = enantiomers; 0.5 = racemate). With the change of the enantiomer fraction, the TC, second-harmonic generation intensity, degree of circular polarization of photoluminescence, and photoluminescence intensity of the materials have been tuned. Particularly, when x = 0.70 - 1, a continuously linear tuning of the TC is achieved, showing a tunable temperature range of about 73 K. This strategy provides an effective means and insights for regulating the phase transition temperature and chiroptical properties of functional materials.

Rashba Effect and Spin-Dependent Excitonic Properties in Chiral Two-Dimensional/Three-Dimensional Composite Perovskite Films

Among various chiral semiconductor materials, chiral two-dimensional (2D)/three-dimensional (3D) composite perovskites (CPs) offer the benefits of strong interface asymmetry and energy transfer between 2D and 3D phases, making the chiral CPs promising for spintronic devices. Therefore, understanding their spintronic properties will be greatly important for expanding their relevant applications. In this work, we synthesized one pair of chiral 2D/3D CP films. Their Rashba effect and spin relaxation process have been investigated by polarization-dependent femtosecond transient absorption spectroscopy. Interestingly, under left- and right-handed circularly polarized light (CPL) excitation, a two-photon emission intensity difference is observed in chiral 2D/3D CP films at 298 K. This work sheds light on the spin-dependent excitonic characteristics of chiral 2D/3D CPs and confirms the feasibility of their application in near-infrared CPL detection.

Unveiling Chiral Perovskite CD Signal Scaling: Discerning Authentic and Counterfeit Signals through Sample-State Analysis

Circular dichroism (CD) spectroscopy is a well-known and powerful technique widely used for distinguishing chiral enantiomers based on their differential absorbance of the right and left circularly polarized light. With the increasing demand for solid-state chiral optics, CD spectroscopy has been extended to elucidate the chirality of solid-state samples beyond the traditional solution state. However, due to the sample preparation differential, the CD spectra of the same compound measured by different researchers may not be mutually consistent. In this study, we employ solution, powder, thin-film, and single-crystal samples to explore the challenges associated with CD measurements and distinguish between genuine and fake signals. Rational fabrication of the solid-state samples can effectively minimize the macroscopic anisotropic nature of the samples and thereby mitigate the influence of linear dichroism (LD) and linear birefringence (LB) effects, which arise from anisotropy-induced differences in the absorbances and refractive indices. The local anisotropic and overall isotropic features of the high-quality thin-film sample achieve an optically isotropic state, which exhibits superior CD signal repeatability at the front and back sides at different angles by rotating the sample along the light path. In addition, sample thickness-induced CD signal overload and absorption saturation pose more severe challenges than the LBLD-induced amplified CD signal but are rarely focused on. The CD signal overload in the deep UV region leads to the presence of fake signals, while absorption saturation results in a complete loss of the CD signal. These findings help obtain accurate CD signals by a well-fabricated optically isotropic sample to avoid LDLB and optimize the sample thickness to avoid fake signals and no signals.

Building Block-Inspired Hybrid Perovskite Derivatives for Ferroelectric Channel Layers with Gate-Tunable Memory Behavior

Ferroelectric photovoltaics driven by spontaneous polarization (Ps ) holds a promise for creating the next-generation optoelectronics, spintronics and non-volatile memories. However, photoactive ferroelectrics are quite scarce in single homogeneous phase, owing to the severe Ps fatigue caused by leakage current of photoexcited carriers. Here, through combining inorganic and organic components as building blocks, we constructed a series of ferroelectric semiconductors of 2D hybrid perovskites, (HA)2 (MA)n-1 Pbn Br3n+1 (n=1-5; HA=hexylamine and MA=methylamine). It is intriguing that their Curie temperatures are greatly enhanced by reducing the thickness of inorganic frameworks from MAPbBr3 (n=∞, Tc =239 K) to n=2 (Tc =310 K, ΔT=71 K). Especially, on account of the coupling of room-temperature ferroelectricity (Ps ≈1.5 μC/cm2 ) and photoconductivity, n=3 crystal wafer was integrated as channel field effect transistor that shows excellent a large short-circuit photocurrent ≈19.74 μA/cm2 . Such giant photocurrents can be modulated through manipulating gate voltage in a wide range (±60 V), exhibiting gate-tunable memory behaviors of three current states ("-1/0/1" states). We believe that this work sheds light on further exploration of ferroelectric materials toward new non-volatile memory devices.

Bulk Photovoltaic Effect Along the Nonpolar Axis in Organic-Inorganic Hybrid Perovskites

The origin of the bulk photovoltaic effect (BPVE) was considered as a built-in electric field formed by the macroscopic polarization of materials. Alternatively, the "shift current mechanism" has been gradually accepted as the more appropriate description of the BPVE. This mechanism implies that the photocurrent generated by the BPVE is a topological current featuring an ultrafast response and dissipation-less nature, which is very attractive for photodetector applications. Meanwhile, the origin of the BPVE in organic-inorganic hybrid perovskites (OIHPs) has not been discussed and is still widely accepted as the classical mechanism without any experimental evidence. Herein, we observed the BPVE along the nonpolar axis in OIHPs, which is inconsistent with the classical explanation. Furthermore, based on the nonlinear optical tensor correlation, we substantiated that the BPVE in OIHPs is originated in the shift current mechanism.

Chiral Hybrid Germanium(II) Halide with Strong Nonlinear Chiroptical Properties

Due to the pronounced anisotropic response to circularly polarized light, chiral hybrid organic-inorganic metal halides have been regarded as promising candidates for the application in nonlinear chiroptics, especially for the second-harmonic generation circular dichroism (SHG-CD) effect. However, designing novel lead-free chiral hybrid metal halides with large anisotropy factors and high laser-induced damage thresholds (LDT) of SHG-CD remains challenging. Herein, we develop the first chiral hybrid germanium halide, (R/S-NEA)3 Ge2 I7 ⋅H2 O (R/S-NGI), and systematically investigated its linear and nonlinear chiroptical properties. S-NGI and R-NGI exhibit large anisotropy factors (gSHG-CD ) of 0.45 and 0.48, respectively, along with a high LDT of 38.46 GW/cm2 ; these anisotropy factors were the highest values among the reported lead-free chiral hybrid metal halides. Moreover, the effective second-order nonlinear optical coefficient of S-NGI could reach up to 0.86 pm/V, which was 2.9 times higher than that of commercial Y-cut quartz. Our findings facilitate a new avenue toward lead-free chiral hybrid metal halides, and their implementation in nonlinear chiroptical applications.

Large Phase-Transition Temperature Enhancement Achieved in a Layered Lead Iodide Hybrid Crystal by H/F Substitution

Organic-inorganic hybrid metal halides with structural flexibility and solution processability have been widely investigated for different application scenarios. However, the effective construction of phase-transition materials with a high phase-transition temperature (Ttr) for potential practical applications remains a great challenge, and reports on the regulation of Ttr with significant enhancement have been rare. In this manuscript, we have realized a large Ttr increase of 148 K in a layered hybrid lead iodide crystal (4-FTMBA)4Pb3I10 (4-FTMBA = 4-fluoro-N,N,N-trimethylbenzenaminium) by the H/F substitution strategy. Compared to the parent (TMBA)4Pb3I10 (TMBA = N,N,N-trimethylbenzenaminium), H/F substitution preserves the structural framework and crystal symmetry in (4-FTMBA)4Pb3I10. The introduction of heavier fluorine will significantly increase the motion barrier for the order-disorder transition, resulting in the remarkably improved Ttr. Temperature-dependent crystal structures, Raman spectra, and dielectric analyses well support the phase-transition behavior. In addition, evident thermochromism with a tunable direct band gap in (4-FTMBA)4Pb3I10 has been observed using UV-vis spectra. To the best of our knowledge, the achieved Ttr enhancement of 148 K by H/F substitution is the highest among the organic-inorganic hybrid lead halide phase-transition materials. This finding would greatly inspire the rational design of functional materials with high performance.

A Two-Dimensional Hybrid Lead Bromide Ferroelectric Semiconductor with an Out-of-Plane Polarization

A two-dimensional (2D) organic-inorganic hybrid perovskite (OIHP) material with out-of-plane ferroelectricity is the key to the miniaturization of vertical-sandwich-type ferroelectric optoelectronic devices. However, 2D OIHP ferroelectrics with out-of-plane polarization are still scarce, and effective design strategies are lacking. Herein, we report a novel 2D Dion-Jacobson perovskite ferroelectric semiconductor synthesized by a rigid-to-flexible cationic tailoring strategy, achieving an out-of-plane polarization of 1.7 μC/cm2 and high photoresponse. Integrating out-of-plane ferroelectricity with excellent photoelectric properties affords a promising platform to investigate ferroelectricity-related effects in vertical optoelectronic devices.

Solid-Liquid Crystal Biphasic Ferroelectrics with Tunable Biferroelectricity

Ferroelectricity has been separately found in numerous solid and liquid crystal materials since its first discovery in 1920. However, a single material with biferroelectricity existing in both solid and liquid crystal phases is very rare, and the regulation of biferroelectricity has never been studied. Here, solid-liquid crystal biphasic ferroelectrics, cholestanyl 4-X-benzoate (4X-CB, X = Cl, Br, and I), which exhibits biferroelectricity in both the solid and liquid crystal phases, is presented. It is noted that the ferroelectric liquid crystal phase of 4X-CB is a cholesteric one, distinct from the ordinary chiral smectic ferroelectric liquid crystal phase. Moreover, 4X-CB shows solid-solid and solid-liquid crystal phase transitions, of which the transition temperatures gradually increase from Cl to Br to I substitution. The spontaneous polarization (Ps ) of 4X-CB in both solid and liquid crystal phases can also be regulated by different halogen substitutions, where the 4Br-CB has the optimal Ps because of the larger molecular dipole moment. To the authors' knowledge, 4X-CB is the first ferroelectric with tunable biferroelectricity, which offers a feasible case for the performance optimization of solid-liquid crystal biphasic ferroelectrics.

The First Enantiomeric Stereogenic Sulfur-Chiral Organic Ferroelectric Crystals

Chiral ferroelectric crystals with intriguing features have attracted great interest and many with point or axial chirality based on the stereocarbon have been successively developed in recent years. However, ferroelectric crystals with stereogenic heteroatomic chirality have never been documented so far. Here, we discover and report a pair of enantiomeric stereogenic sulfur-chiral single-component organic ferroelectric crystals, Rs -tert-butanesulfinamide (Rs -tBuSA) and Ss -tert-butanesulfinamide (Ss -tBuSA) through the deep understanding of the chemical design of molecular ferroelectric crystals. Both enantiomers adopt chiral-polar point group 2 (C2 ) and exhibit mirror-image relationships. They undergo high-temperature 432F2-type plastic ferroelectric phase transition around 348 K. The ferroelectricity has been well confirmed by ferroelectric hysteresis loops and domains. Polarized light microscopy records the evolution of the ferroelastic domains, according with the fact that the 432F2-type phase transition is both ferroelectric and ferroelastic. The very soft characteristics with low elastic modulus and hardness reveals their excellent mechanical flexibility. This finding indicates the first stereosulfur chiral molecular ferroelectric crystals, opening up new fertile ground for exploring molecular ferroelectric crystals with great application prospects.

Low Detection Limit Circularly Polarized Light Detection Realized by Constructing Chiral Perovskite/Si Heterostructures

Chiral perovskites have been demonstrated as promising candidates for direct circularly polarized light (CPL) detection due to their intrinsic chirality and excellent charge transport ability. However, chiral perovskite-based CPL detectors with both high distinguishability of left- and right-handed optical signals and low detection limit remain unexplored. Here, a heterostructure, (R-MPA)2 MAPb2 I7 /Si (MPA = methylphenethylamine, MA = methylammonium) is constructed, to achieve high-sensitive and low-limit CPL detection. The heterostructures with high crystalline quality and sharp interface exhibit a strong built-in electric field and a suppressed dark current, not only improving the separation and transport of the photogenerated carriers but also laying a foundation for weak CPL signals detection. Consequently, the heterostructure-based CPL detector obtains a high anisotropy factor up to 0.34 with a remarkably low CPL detection limit of 890 nW cm-2 under the self-driven mode. As a pioneering study, this work paves the way for designing high-sensitive CPL detectors that simultaneously have great distinguishing capability and low detection limit of CPL.

Precise Design of Molecular Ferroelectrics with High TC and Tunable Band Gap by Molecular Modification

Molecular ferroelectric materials are widely applied in piezoelectric converters, non-volatile memorizers, and photovoltaic devices due to their advantages of adjustable structure, lightweight, easy processing, and environmental friendliness. However, designing multifunctional molecular ferroelectrics with excellent properties has always been a great challenge. Herein, a multiaxial molecular ferroelectric is successfully designed by modifying the quasi-spherical cation dabco with CuBr₂ to obtain halogenated [Bretdabco]CuBr₄ (Bretdabco = N-bromoethyl-N'-diazabicyclo [2.2.2]octane), which crystallizes in polar point groups (C₆). Typical ferroelectric behaviors featured by the P-E hysteresis loop and switched ferroelectric domain are exhibited. Notably, the molecular ferroelectric shows a high T_C of 460 K, which is rare in the field and could greatly expand the application range of this material. In addition, the band gap is adjustable through the regulation of halogen. Both the UV absorption spectra and theoretical calculations indicate that the molecular ferroelectrics belong to a direct band gap (2.14 eV) semiconductor. This tunable and narrow band gap semiconductor molecular ferroelectric material with high T_C can be utilized more effectively in the study of optoelectronics and sensors, including piezoelectric energy harvesters. This research may provide a promising approach for the development of multiaxial molecular ferroelectrics with a tiny band gap and high T_C.

Incorporating an Aromatic Diammonium To Assemble Bilayered Dion-Jacobson Perovskite Crystals for Weak Light Detection

Two-dimensional (2D) Dion-Jacobson (DJ) hybrid perovskites with exceptional stability and enhanced out-of-plane carrier transport are regarded as one of the competive candidates for constructing next-generation photodetectors. However, the studies of DJ hybrid perovskites on weak light detection remain scarce, and the devices based on them usually show relatively poor weak light detection ability, with a detection limit of around μW/cm². Herein, a new DJ hybrid perovskite (3AMPY)(MA)Pb₂Br₇ [3AMPY is 3-(aminomethyl)pyridinium, and MA is methylammonium] with short interlayer spacing and more lattice rigidity is obtained. The devices based on (3AMPY)(MA)Pb₂Br₇ crystals exhibit an ultrahigh sensibility to weak light at 377 and 405 nm, with an extremely low detection limit of ∼70 nW/cm². Moreover, the on/off ratios and detectivity of the devices can reach ∼10³ and ∼10¹² Jones at both 377 and 405 nm, respectively. This work highlights great potential of DJ hybrid perovskites toward weak light detection.

Ferroelectricity in Hybrid Perovskites

Ferroelectric ceramics such as PbZr_xTi_1-xO₃ (PZT) are widely applied in many fields, from medical to aerospace, because of their dielectric, piezoelectric, and pyroelectric properties. In the past few years, hybrid organic-inorganic halide perovskites have gradually attracted attention for their optical and electronic properties, including ferroelectricity, and for their low fabrication costs. In this Review, we first describe techniques that are used to quantify ferroelectric figures of merit of a material. We then discuss ferroelectricity in hybrid perovskites, starting from controversies in methylammonium iodoplumbate perovskites and then focusing on low-dimensional perovskites that offer an unambiguous platform to obtain ferroelectricity. Finally, we provide examples of the application of perovskite ferroelectrics in solar cells, LEDs, and X-ray detectors. We conclude that the vast structure-property tunability makes low-dimensional hybrid perovskites promising, but they have yet to offer ferroelectric figures of merit (e.g., saturated polarization) and thermal stability (e.g., Curie temperature) competitive with those of conventional oxide perovskite ferroelectric materials.

Circularly Polarized Light Responsive Materials: Design Strategies and Applications

Circularly polarized light (CPL) with the end of optical vector traveling along circumferential trajectory shows left- and right-handedness, which transmits chiral information to materials via complicated CPL-matter interactions. Materials with circular dichroism respond to CPL illumination selectively with differential outputs that can be used to design novel photodetectors. Racemic or achiral compounds under CPL go through photodestruction, photoresolution, and asymmetric synthesis pathways to generate enantiomeric bias and optical activity. By this strategy, helical polymers and chiral inorganic plasmonic nanostructures are synthesized directly, and their intramolecular folding and subsequent self-assembly are photomodulable as well. In the aggregated state of self-assembly and liquid crystal phase, helical sense of the dynamic molecular packing is sensitive to enantiomeric bias brought by CPL, enabling the chiral amplification to supramolecular scale. In this review, the application-guided design strategies of CPL-responsive materials are aimed to be systematically summarized and discussed. Asymmetric synthesis, resolution, and property-modulation of small organic compounds, polymers, inorganic nanoparticles, supramolecular assemblies and liquid crystals are highlighted based on the important developments during the last decades. Besides, applications of light-matter interactions including CPL detection and biomedical applications are also referred.

Charge-Transfer Complex Doped Photothermal Hydrogels for Discriminating Circularly Polarized Near-Infrared Light

Hydrogels behave as potential candidates to investigate circularly polarized light (CP)-matter interaction, which however suffer from small sensitivity towards circular polarization. Here we report a general protocol to build hydrogels from π-conjugated amino acids with coassembled charge-transfer (CT) complexes, covering a wide scope of donors and acceptors, which were incorporated into stable hydrogel matrices. CT complexes formed block coassemblies with gelators, induced the emergence of macroscopic chiral helices, where efficient chirality transfer occurs to realize tunable Cotton effects from visible light to NIR-I region depending on the structures of CT pairs. The hybrid hydrogels showed tunable photothermal performances with excellent heating-cooling cycling durability. Circularly polarized NIR light selectively triggered gel-solution phase transition at different timescales. Left- and right-CP illumination generates up to 2.5 folds difference in gel collapse time that allows for direct discrimination by naked eyes.