Stable Zn Anodes with Triple Gradients

An electrochemically driven hybrid interphase enabling stable versatile zinc metal electrodes for aqueous zinc batteries

Aqueous Zn ion batteries are advantageous in terms of safety and cost, while their sustainable applications are usually impeded by dendrite growth and interfacial side reactions. Here, we present the development of an electrochemically driven artificial solid-state electrolyte interphase, utilizing a metal surface coupling agent phosphate ester as a protective layer for Zn negative electrodes. Upon cycling, the protective layer in situ transforms into a hybrid phase enriched with well dispersed Zn3(PO4)2 nanocrystals. This transformation ensures a uniform Zn2+ flux, effectively suppresses dendrite growth, and mitigates side reactions. In addition, such protective layer ensures Zn electrode stable plating/stripping performance for 1500 h at 10 mA cm-2 and 1 mAh cm-2, while pouch cells coupled with NaV3O8·1.5H2O deliver ampere-hour level capacity. Beyond that, its robust adhesion and flexibility enable the Zn electrode to maintain good performance under a variety of harsh conditions. This approach provides valuable insights into the advancement of Zn metal batteries.

Chemically Recovered Lithium Dendrites Enabled by Gradient-Distributed Liquid Metal Particles in Composite Polymer Electrolytes

The increasing demand for high-energy-density rechargeable batteries has spurred significant advancements in lithium (Li) metal batteries employing solid polymer electrolytes. Extensive efforts have been devoted to tackling the crucial shorting problem in cycled polymer electrolytes via tuning the polymer chemistries and polymer-metal interfacial properties. However, the working principles of these designs mainly focus on physical/chemical suppression, instead of full recovery of the grown dendrites. Here, we propose an effective gradient design in polymer electrolytes by introducing Ga-based liquid metal (LM) particles with a depth-dependent content, enabling effective recovery of Li dendrites via spontaneous alloying reaction. Such an asymmetric electrolyte configuration is capable of fully chemically alloying the dendrites upon their puncturing into the LM-rich layer, while inhibiting electrical percolation at the LM-free layer, especially under mechanical pressure during cell assembly. Post-mortem analyses reveal the structural deformation of piercing dendrites into spherical Li-LM alloys, thereby preventing shorting even with extended cycles. Consequently, ultrastable cycling stabilities are achieved in both symmetric cells (>2000 h) and Li/LiFePO4 full cells (>400 cycles; average CE of 99.86%). These findings not only exploit dendrite recovery functionality by using LM-based gradient electrolytes but also highlight the potential of incorporating gradient designs in various battery systems.

Nickel silicate nanotubes modifying the surface of Zn anode tuning the uniform zinc deposition for high-performance Zn metal battery

Among many new types of ion batteries, aqueous Zn-ion batteries (AZIBs) have gained more and more interest because of their unique characteristics such as abundant metal Zn reserves and high capacity. Herein, a nickel silicate nanotube (NSO) is synthesized for protecting Zn metal anode by the surface modification strategy (NSO-Zn). On the one hand, the pores generated by the stacking of NSO nanotubes uniformly guide the deposition of Zn2+ on Zn plate, which greatly reduces the risk of the battery's short-circuit due to the dendrite growth puncturing the diaphragm. On the other hand, the hydrophilic nature of NSO is more conducive to the penetration of electrolyte. Thanks to the inherent material and structural properties of NSO nanotubes, the symmetric cells prepared with NSO-Zn electrodes have a long cycle life of more than 2500 h at 1 mA·cm-2. Finite element simulations of the electrical field and Zn2+ intensity demonstrate that the NSO-Zn electrodes can well reduce the local current density resulting in homogenizing electric field distribution. The present study not only provides a facile and large-grid synthesis of NSO nanotubes, but also demonstrates that NSO nanotubes can protect high-reversible zinc metal anodes and guide the uniform zinc deposition for long-cycle AZIBs.

Multifunctional Polymer Interphase with Fast Kinetics for Ultrahigh-rate Zn Metal Anode

Polymer interphase on Zn anodes obviates dendrite growth and significant side reactions including corrosion and hydrogen evolution in aqueous zinc ion batteries (AZIBs), however has drawbacks of slow kinetics and large overpotential for Zn plating/stripping that prevent practical application especially under high-rate conditions. Here, a multifunctional polymer interphase with fast kineticsis reported, using poly(phenazine-alt-pyromellitic anhydride) (PPPA) as an electrolyte additive. PPPA, with linear π-conjugated structure and enriched polar pyridine (conjugated cyclic -C=N-) and carbonyl (C=O) groups, preferentially adsorbs on the Zn anode to form a stable solid-electrolyte interphase (SEI) layer in situ. The PPPA SEI is efficient to block direct contact between water molecules and Zn anode, and regulate the interfacial solvation structure and Zn depostion. Importantly, the expanding π-conjugated structure of PPPA is shown to provide abundant 2D open channels for rapid Zn2+ transport, and the delocalized π electrons form a space electrostatic field to facilitate de-solvation and diffusion of Zn2+. As a result, the Zn metal anode with PPPA/ZnSO4 electrolyte exhibits high Coulombic efficiency of 98.3 % at current density of 20 mA  cm-2, and excellent cycle lifespan for over 2000 cycles (400 h) at current density 50 mA cm-2 and plating/stripping capacity of 5 mAh cm-2. The Zn||MnO2 full battery exhibited a discharge capacity of 74.4 mAh g-1 after 5000 cycles at the current density of 2000 mA g-1, demonstrating practical feasibility. It is concluded that judicious engineering of polymer additives and interphase will benefit the development of commercial AZIBs with fast kinetics for high-rate applications.

Innovative Design of a Double-Layer Gradient Coating for Dendrite-Free and Ultrastable Zinc Anodes

The rampant "top-growth" dendrites, hydrogen evolution reaction (HER), and zinc (Zn) self-corrosion severely impede the further development of rechargeable aqueous zinc ion batteries. To address these challenges, a novel double-layer gradient coating consisting of a zincophilic Sn inner layer and an organic polymer outer layer (OSA/PAM@Sn) is constructed on the surface of the Zn anode. The organic outer layer, composed of cross-linked oxidized sodium alginate and polyacrylamide (OSA/PAM), not only serves as a physical barrier to isolate active water but also accelerates Zn2+ diffusion by facilitating the desolvation process of [Zn(H2O)6]2+ due to its plentiful polar functional groups, thereby effectively suppressing the detrimental HER and Zn self-corrosion. Simultaneously, the loose Sn inner layer can offer abundant nucleation sites to induce uniform "bottom-to-top" Zn deposition with low overpotential. Benefiting from the synergistic effect of the designed double-layer gradient coating, the OSA/PAM@Sn-Zn anode exhibits remarkable reversibility, with lifespans of over 5000 and 1200 h at 1 mA cm-2-1 mAh cm-2 and 5 mA cm-2-5 mAh cm-2 in symmetric cells, respectively. Additionally, the MnO2||OSA/PAM@Sn-Zn full battery also displays an improved rate performance and cycle stability. This work emphasizes the importance of synergistic effects in interface design to achieve side reaction-free and dendrite-free Zn anodes.

Weak H-Bond Interface Environment for Stable Aqueous Zinc Batteries

Hydrogen evolution reaction and Zn dendrite growth, originating from high water activity and the adverse competition between the electrochemical kinetics and mass transfer, are the main constraints for the commercial applications of the aqueous zinc-based batteries. Herein, a weak H-bond interface with a suspension electrolyte is developed by adding TiO2 nanoparticles into the electrolytes. Owing to the strong polarity of Ti-O bonds in TiO2, abundant hydroxyl functional groups are formed between the TiO2[110] active surface and aqueous environment, which can produce a weak H-bond interface by disrupting the initial H-bond networks between the water molecules, thereby accelerating the mass transfer of Zn2+ and reducing the water activity. In consequence, the Zn||Zn symmetrical cells display reversible Zn plating/stripping behaviors with a high Coulombic efficiency of 99.7% over 700 cycles. Moreover, the TiO2-based suspension strategy is also applicable to other zinc salt systems and exhibits fast plating/stripping behaviors. The suspension electrolyte enables long-term full cells, including Zn||PANI hybrid capacitors and Zn||ZnVO full batteries.

In Situ Construction of Hierarchical Nickel-Cobalt Hydroxides Derived from Metal-Organic Frameworks for High-Performance Nickel-Zinc Batteries

Rechargeable nickel-zinc (Ni-Zn) batteries hold great promise for large-scale applications due to their relatively high voltage, cost-efficient zinc anode, and good safety. However, the commonly used cathode materials are susceptible to overcharging and experience irreversible capacity degradation, primarily as a result of low electrical conductivity and substantial limitations in volume-constrained proton diffusion. Here, we present a robust methodology for synthesizing hierarchical nickel-cobalt (Ni-Co) hydroxides characterized by hollow interiors and interconnected nanosheet shells with the help of in situ formed metal-organic frameworks (MOFs). The templating effect of the MOF induced the hierarchical structure, while the chemical etching of MOFs by Ni2+ ions resulted in a hollow structure, thereby enhancing the surface area. Theoretical calculations suggested that incorporation of cobalt reduces the band gap, thereby improving electronic conductivity, and lowered the deprotonation energy, which mitigated overcharge issues. These advantages conferred improved specific capacity, rate capability, and cyclic stability to the Ni-Co hydroxide. The Ni-Zn cell delivered specific energy values of 338 Wh kg-1 at 1.62 kW kg-1 and 142 Wh kg-1 at 29.89 kW kg-1. Our investigations undercoreed the critical role of MOFs as intermediates in the preparation of multi-component hydroxide and the construction of hiearchical structures to achieve superior performance.

Stress Release of Zincophilic N-Doped Carbon@Sn Composite on High-Curvature Surface of Zinc Foam for Dendrite-Free 3D Zinc Anode

Commercial 3D zinc foam anodes with high deposition space and ion permeation have shown great potential in aqueous ion batteries. However, the local accumulated stress from its high-curvature surface exacerbates the Zn dendrite issue, leading to poor reversibility. Herein, we have employed zincophilic N-doped carbon@Sn composites (N-C@Sn) as nano-fillings to effectively release the local stress of high curvature surface of 3D Zn foams toward dendrite-free anode in aqueous zinc ion battery (AZIB). These electronegative and conductive N-C@Sn nano-fillings as supporters can provide a highly zincophilic channel for initial Zn nucleation and reduce local current density for regulating Zn deposition. Uniform Zn deposition further assists homogenous stress distribution on the platting surface, which gives a positive feedback loop to improve anode reversibility. As a result, zinc foam with N-C@Sn composite (ZCSn Foam) symmetric cell achieves a long cycle lifespan of 1100h at 0.5 mA cm-2, much more than that of Zn Foam (∼80 h lifespan). The full cell ZCSn Foam||MnO2 exhibits remarkable reversibility with 67% retention after 1000 cycles at 0.8 A g-1 and 76% after 1600 cycles at 2 Ag-1. This 3D-constructing strategy may offer a promising and practical pathway for metal anode application.

Emulating "Curvature-Enhanced Adsorbate Coverage" for Superconformal and Orientated Zn Electrodeposition in Zinc-ion-Batteries

Uneven Zn deposition and unfavorable side reactions have prevented the reversibility of the Zn anode. Herein, we design a rearranged (002) textured Zn anode inspired by a traditional curvature-enhanced adsorbate coverage (CEAC) process to realize the highly reversible Zn anode. The rearranged (002) textured structure directs superconformal Zn deposition by controlling the spatial deposition rate of the rearranged crystal planes, thereby promoting bottom-up "superfilling" of the 3D Zn skeletons. Meanwhile, our designed anode also induces the epitaxial Zn deposition, alleviating the parasitic reactions owing to the lowest surface energy of the (002) plane. Attributed to these superiorities, uniform and oriented Zn deposition can be obtained, exhibiting an ultra-long lifespan over 479 hrs at an ultrahigh depth of discharge (DOD) of 82.12 %. The Zn|Na2V6O16 ⋅ 3H2O battery delivers an improved cycling performance, even at a high area capacity of 5.15 mAh/cm2 with a low negative/positive (N/P) capacity ratio of 1.63. The superconformal deposition approach for Zn anodes paves the way for the practical application of high-performance zinc-ion batteries.

Gradient Distribution of Zincophilic Sites for Stable Aqueous Zinc-Based Flow Batteries with High Capacity

Current collectors, as reaction sites, play a crucial role in influencing various electrochemical performances in emerging cost-effective zinc-based flow batteries (Zn-based FBs). 3D carbon felts (CF) are commonly used but lack effectiveness in improving Zn metal plating/stripping. Here, a current collector with gravity-induced gradient copper nanoparticles (CF-G-Cu NPs) is developed, integrating gradient conductivity and zincophilicity to regulate Zn deposition and suppress side reactions. The CF-G-Cu NPs electrode modulates Zn nucleation and growth via the zincophilic Cu/CuZn5 alloy has been confirmed by density functional theory (DFT) calculations. Finite element simulation demonstrates the gradient internal structure effectively optimizes the local electric/current field distribution to regulate the Zn2+ flux, improving bottom-up plating behavior for Zn metal and mitigating top-surface dendrite growth. As a result, Zn-based asymmetrical FBs with CF-G-Cu NPs electrodes achieve an areal capacity of 30 mAh cm-2 over 640 h with Coulombic efficiency of 99.5% at 40 mA cm-2. The integrated Zn-Iodide FBs exhibit a competitive long-term lifespan of 2910 h (5800 cycles) with low energy efficiency decay of 0.062% per cycle and high cumulative capacity of 112800 mAh cm-2 at a high current density of 100 mA cm-2. This gradient distribution strategy offers a simple mode for developing Zn-based FB systems.

Innovative Zinc Anodes: Advancing Metallurgy Methods to Battery Applications

Aqueous zinc metal batteries (AZMBs) are emerging as a powerful contender in the realm of large-scale intermittent energy storage systems, presenting a compelling alternative to existing ion battery technologies. They harness the benefits of metal zinc's high safety, natural abundance, and favorable electrochemical potential (-0.762 V vs Standard hydrogen electrode, SHE), alongside an impressive theoretical capacity (820 mAh g-1 and 5655 mAh cm-3). However, the electrochemical performance of ZMBs is impeded by several challenges, including poor compatibility with high-loading cathodes and persistent side reactions. These issues are intricately linked to the inherent physicochemical properties of the zinc metal anodes (ZMAs). Here, this review delves into the traditional methods of ZMAs production, encompassing extraction, electrodeposition, and rolling processes. The discussion then progresses to an exploration of cutting-edge methodologies designed to enhance the electrochemical performance of ZMAs. These methods are categorized into alloying, pre-treatment of substrate, advanced electrodeposition techniques, and the development of composite anodes utilizing zinc powder. The review offers a comparative analysis of the merits and drawbacks of various optimization strategies, highlighting the beneficial outcomes achieved. It aspires to inspire novel concepts for the advancement and innovation of next-generation zinc-based energy storage solutions.

Lattice Expanded Titania as an Excellent Anode for an Aqueous Zinc-Ion Battery Enabled by a Highly Reversible H+-Promoted Zn2+ Intercalation

Aqueous Zn-ion batteries have garnered significant attention as promising and safe energy storage systems. Due to the inevitable dendrite and corrosion in metallic Zn anodes, alternative anodes of intercalation-type materials are desirable, but they still suffer from low energy efficiency, unsatisfactory capacity, and insufficient cycle life. Here, we develop a high-performance anode for aqueous Zn-ion batteries via a lattice expansion strategy in combination with a Zn2+/H+ synergistic mechanism. The anatase TiO2 with expanded lattice exhibits an appropriate deintercalation potential of 0.18 V vs Zn/Zn2+ and a high reversible capacity (227 mAh g-1 at 2.04 A g-1) with an outstanding rate capability and excellent cycle stability. The high electrochemical performance is attributed to a decrease in the Zn2+/H+ diffusion barriers, which results from lattice expansion and also a H+-promoted Zn2+ intercalation effect. The anode intercalates Zn2+/H+ via a solid-solution mechanism with a minor volume change, which contributes to the high reversibility and thus high energy efficiency. When paired with different types of cathodes, including NV, I2, and activated carbon, to construct corresponding full cells, high specific energy, high specific power, long cycle life, and extremely high energy efficiency can be achieved. This study provides a prospect for developing high-performance Zn-ion batteries.

Grain Boundary Filling Empowers (002)-Textured Zn Metal Anodes with Superior Stability

Aqueous Zn battery is promising for grid-level energy storage due to its high safety and low cost, but dendrite growth and side reactions at the Zn metal anode hinder its development. Designing Zn with (002) orientation improves the stability of the Zn anode, yet grain boundaries remain susceptible to corrosion and dendrite growth. Addressing these intergranular issues is crucial for enhancing the electrochemical performance of (002)-textured Zn. Here, a strategy based on grain boundary wetting to fill intergranular regions and mitigate these issues is reported. By systematically investigating boundary fillers and filling conditions, In metal is chosen as the filler, and one-step annealing is used to synergistically convert commercial Zn foils into single (002)-textured Zn while filling In into the boundaries. The inter-crystalline-modified (002)-textured Zn (IM(002) Zn) effectively inhibits corrosion and dendrite growth, resulting in excellent stability in batteries. This work offers new insights into Zn anode protection and the development of high-energy Zn batteries.

Synergetic bifunctional Cu-In alloy interface enables Ah-level Zn metal pouch cells

Rechargeable aqueous zinc-metal batteries, considered as the possible post-lithium-ion battery technology for large-scale energy storage, face severe challenges such as dendrite growth and hydrogen evolution side reaction (HER) on Zn negative electrode. Herein, a three-dimensional Cu-In alloy interface is developed through a facile potential co-replacement route to realize uniform Zn nucleation and HER anticatalytic effect simultaneously. Both theoretical calculations and experimental results demonstrate that this bifunctional Cu-In alloy interface inherits the merits of low Zn-nucleation overpotential and high HER overpotential from individual copper and indium constituents, respectively. Moreover, the dynamical self-reconstruction during cycling leads to an HER-anticatalytic and zincophilic gradient hierarchical structure, enabling highly reversible Zn chemistry with dendrite-free Zn (002) deposition and inhibited HER. Moreover, the improved interface stability featured by negligible pH fluctuations in the diffusion layer and suppressed by-product formation is evidenced by in-situ scanning probe technology, Raman spectroscopy, and electrochemical gas chromatography. Consequently, the lifespan of the CuIn@Zn symmetric cell is extended to more than one year with a voltage hysteresis of 6 mV. Importantly, the CuIn@Zn negative electrode is also successfully coupled with high-loading iodine positive electrode to fabricate Ah-level (1.1 Ah) laminated pouch cell, which exhibits a capacity retention of 67.9% after 1700 cycles.

Modulation of Electron Push-Pull by Redox Non-Innocent Additives for Long Cycle Life Zinc Anode

Application of an aqueous Zn-ion battery is plagued by a water-induced hydrogen evolution reaction (HER), resulting in local pH variations and an unstable electrode-electrolyte interface (EEI) with uncontrolled Zn plating and side reactions. Here, 4-methyl pyridine N-oxide (PNO) is introduced as a redox non-innocent additive that comprises a hydrophilic bipolar N+-O- ion pair as a coordinating ligand for Zn and a hydrophobic ─CH3 group at the para position of the pyridine ring that reduces water activity at the EEI, thereby enhancing stability. The N+-O- moiety of PNO possesses the unique functionality of an efficient push electron donor and pull electron acceptor, thus maintaining the desired pH during charging/discharging. Intriguingly, replacing ─CH3 (electron pushing +I effect) by ─CF3 group (electron pulling ─I effect), however, does not improve the reversibility; instead, it degrades the cell performance. The electrolyte with 2 m ZnSO4 + 15 mm PNO enables symmetric cell Zn plating/stripping for a remarkable > 10 000 h at 0.5 mA cm-2 and exhibits coulombic efficiency (CE) ≈99.61% at 0.8 mA cm-2 in Zn/Cu asymmetric cell. This work showcases the immense interplay of the electron push-pull of the additives on the cycling.

Gradient-Layered MXene/Hollow Lignin Nanospheres Architecture Design for Flexible and Stretchable Supercapacitors

With the rapid development of flexible wearable electronics, the demand for stretchable energy storage devices has surged. In this work, a novel gradient-layered architecture was design based on single-pore hollow lignin nanospheres (HLNPs)-intercalated two-dimensional transition metal carbide (Ti3C2Tx MXene) for fabricating highly stretchable and durable supercapacitors. By depositing and inserting HLNPs in the MXene layers with a bottom-up decreasing gradient, a multilayered porous MXene structure with smooth ion channels was constructed by reducing the overstacking of MXene lamella. Moreover, the micro-chamber architecture of thin-walled lignin nanospheres effectively extended the contact area between lignin and MXene to improve ion and electron accessibility, thus better utilizing the pseudocapacitive property of lignin. All these strategies effectively enhanced the capacitive performance of the electrodes. In addition, HLNPs, which acted as a protective phase for MXene layer, enhanced mechanical properties of the wrinkled stretchable electrodes by releasing stress through slip and deformation during the stretch-release cycling and greatly improved the structural integrity and capacitive stability of the electrodes. Flexible electrodes and symmetric flexible all-solid-state supercapacitors capable of enduring 600% uniaxial tensile strain were developed with high specific capacitances of 1273 mF cm-2 (241 F g-1) and 514 mF cm-2 (95 F g-1), respectively. Moreover, their capacitances were well preserved after 1000 times of 600% stretch-release cycling. This study showcased new possibilities of incorporating biobased lignin nanospheres in energy storage devices to fabricate stretchable devices leveraging synergies among various two-dimensional nanomaterials.

Formulating Self-Repairing Solid Electrolyte Interface via Dynamic Electric Double Layer for Practical Zinc Ion Batteries

Zinc ion batteries (ZIBs) encounter interface issues stemming from the water-rich electrical double layer (EDL) and unstable solid-electrolyte interphase (SEI). Herein, we propose the dynamic EDL and self-repairing hybrid SEI for practical ZIBs via incorporating the horizontally-oriented dual-site additive. The rearrangement of distribution and molecular configuration of additive constructs the robust dynamic EDL under different interface charges. And, a self-repairing organic-inorganic hybrid SEI is constructed via the electrochemical decomposition of additive. The dynamic EDL and self-repairing SEI accelerate interfacial kinetics, regulate deposition and suppress side reactions in the both stripping and plating during long-term cycles, which affords high reversibility for 500 h at 42.7 % depth of discharge or 50 mA ⋅ cm-1. Remarkably, Zn//NVO full cells deliver the impressive cycling stability for 10000 cycles with 100 % capacity retention at 3 A ⋅ g-1 and for over 3000 cycles even at lean electrolyte (7.5 μL ⋅ mAh-1) and high loading (15.26 mg ⋅ cm-2). Moreover, effectiveness of this strategy is further demonstrated in the low-temperature full cell (-30 °C).

Interfacial chemistry in multivalent aqueous batteries: fundamentals, challenges, and advances

As one of the most promising electrochemical energy storage systems, aqueous batteries are attracting great interest due to their advantages of high safety, high sustainability, and low costs when compared with commercial lithium-ion batteries, showing great promise for grid-scale energy storage. This invited tutorial review aims to provide universal design principles to address the critical challenges at the electrode-electrolyte interfaces faced by various multivalent aqueous battery systems. Specifically, deposition regulation, ion flux homogenization, and solvation chemistry modulation are proposed as the key principles to tune the inter-component interactions in aqueous batteries, with corresponding interfacial design strategies and their underlying working mechanisms illustrated. In the end, we present a critical analysis on the remaining obstacles necessitated to overcome for the use of aqueous batteries under different practical conditions and provide future prospects towards further advancement of sustainable aqueous energy storage systems with high energy and long durability.

Molecular Filter Net Synergy with Regulation in Ion Percolation for High-Performance Zn Metal Batteries

The uncontrollable dendrite growth and complex parasitic reactions of Zn metal anodes cause short cycle lives and low Coulombic efficiency, which seriously affect their applications. To address these issues, this research proposes an efficient ion percolating interface constituted by a hydrogen-bonded organic framework (HND) for a highly stable and reversible Zn anode. The hydrogen-bonded skeleton acts as a molecular filter net, capturing water molecules by forming targeted hydrogen-bonding systems with them, sufficiently inhibiting parasitic reactions. Additionally, the interaction of the rich-N and -O electrochemically active sites with Zn2+ effectively regulates its percolation, which greatly enhances the diffusion kinetics of Zn2+, thus facilitating rapid and uniform migration of Zn2+ at the anode surface. Through the above synergistic effect, dendrite-free anodes with highly reversible Zn plating/stripping behaviors can be achieved. Hence, the modified Zn anode (HND@Zn) performs a steady cycling time of more than 1700 h at 1 mA cm-2. Moreover, the HND@Cu||Zn asymmetric cell exhibits a stable charge/discharge process of over 1600 cycles with an average Coulombic efficiency of up to 99.6% at 5 mA cm-2. This work provides some conceptions for the evolution and application of high-performance Zn metal batteries.

Ultra-High Proportion of Grain Boundaries in Zinc Metal Anode Spontaneously Inhibiting Dendrites Growth

Aqueous Zn-ion batteries are an attractive electrochemical energy storage solution for their budget and safe properties. However, dendrites and uncontrolled side reactions in anodes detract the cycle life and energy density of the batteries. Grain boundaries in metals are generally considered as the source of the above problems but we present a diverse result. This study introduces an ultra-high proportion of grain boundaries on zinc electrodes through femtosecond laser bombardment to enhance stability of zinc metal/electrolyte interface. The ultra-high proportion of grain boundaries promotes the homogenization of zinc growth potential, to achieve uniform nucleation and growth, thereby suppressing dendrite formation. Additionally, the abundant active sites mitigate the side reactions during the electrochemical process. Consequently, the 15 μm Fs-Zn||MnO2 pouch cell achieves an energy density of 249.4 Wh kg-1 and operates for over 60 cycles at a depth-of-discharge of 23 %. The recognition of the favorable influence exerted by UP-GBs paves a new way for other metal batteries.

Blocking Interfacial Proton Transport via Self-Assembled Monolayer for Hydrogen Evolution-Free Zinc Batteries

Aqueous Zn-ion batteries (ZIBs) are promising next-generation energy storage devices, yet suffer from the issues of hydrogen evolution reaction (HER) and intricate side reactions on the Zn anode surface. The hydrogen (H)-bond networks play a critical role in interfacial proton transport that may closely relate to HER but are rarely investigated. Herein, we report a self-assembled monolayer (SAM) strategy which is constructed by anchoring ionic liquid cations on Ti3C2Tx substrate for HER-free Zn anode. Molecule dynamics simulations reveal that the rationally designed SAM with a high coordination number of water molecules (25-27, 4-6 for Zn2+) largely reduces the interfacial densities of H2O molecules, therefore breaking the connectivity of H-bond networks and blocking proton transport on the interface, by which the HER is suppressed. Then, a series of in situ characterizations demonstrate that negligible amounts of H2 gas are collected from the Zn@SAM-MXene anode. Consequently, the symmetric cell enables a long-cycling life of 3000 h at 1 mA cm-2 and 1000 h at 5 mA cm-2. More significantly, the stable Zn@SAM-MXene films are successfully used for coin full cells showing high-capacity retention of over 94 % after 1000 cycles and large-area (10×5 cm2) pouch cells with desired performance.

Backside Coating for Stable Zn Anode with High Utilization Rate

Stable Zn anodes with high utilization rate are urgently required to promote the specific and volumetric energy densities of Zn-ion batteries for practical applications. Herein, contrary to the widely utilized surface coating on Zn anodes, this work shows that a zinc foil with a backside coated layer delivers much enhanced cycling stability even under high depth of discharge. The backside coating significantly reduces stress concentration, accelerates heat diffusion, and facilitates electron transfer, thus effectively preventing dendrite growth and structural damage at high Zn utilization. As a result, the developed anode can be stably cycled for 334 h at 85.5% Zn utilization, which outperforms bare Zn and previously reported results on surface-coated Zn foils. An NVO-based full cell also shows stable performance with high Zn utilization rate (69.4%), low negative-positive electrodes ratio (1.44), and high specific/volumetric energy densities (155.8 Wh kg-1/178 Wh L-1), which accelerates the progress toward practical zinc-ion batteries.

Constructing 3D Zincophilic Skeleton in Nitrogen-Doped Carbon Hybrid Fibers for Dendrite-Free Zn Anodes

The Zn dendrite growth and side reactions are two major issues for the practical use of Zn metal anodes (ZMAs). Herein, an N-doped carbon-based hybrid fiber with the 3D porous skeleton and the zincophilic Cu nanoparticles (denoted as Cu@HLCF) is developed for stable ZMAs. The zincophilic Cu particles in the skeleton work as the active sites to facilitate uniform Zn nucleation. Meanwhile, the abundant pores in the framework of the hybrid fibers provide a large space to relieve the structural stress and suppress the dendrite growth. Moreover, the good mechanical characteristics of the hybrid fiber ensure its high potential applications for flexible electronics. Theoretical analysis results disclose the strong interaction between Zn and Cu sites, and experimental results demonstrate the low voltage hysteresis, high reversibility, and dendrite-free behavior of the Cu@HLCF host for Zn plating/stripping. Moreover, the solid-state Zn-ion battery (ZIB) assembled with a Cu@HLCF/Zn anode shows the prominent flexibility, impressively reliability, and outstanding cycling capability. Therefore, this work not only provides a novel design for the efficient and stable Zn metal anode but also promotes the development of flexible power sources for flexible electronics.

Unlocking the Effect of Chain Length and Terminal Group on Ethylene Glycol Ether Family Toward Advanced Aqueous Electrolytes

Constructing high-performance hybrid electrolyte is important to advanced aqueous electrochemical energy storage devices. However, due to the lack of in-depth understanding of how the molecule structures of cosolvent additives influence the properties of electrolytes significantly impeded the development of hybrid electrolytes. Herein, a series of hybrid electrolytes are prepared by using ethylene glycol ether with different chain lengths and terminal groups as additives. The optimized 2 m LiTFSI-90%DDm hybrid electrolyte prepared from diethylene glycol dimethyl ether (DDm) molecule showcases excellent comprehensive performance and significantly enhances the operating voltage of supercapacitors (SCs) to 2.5 V by suppressing the activity of water. Moreover, the SC with 2 m LiTFSI-90%DDm hybrid electrolyte supplies a long-term cycling life of 50 000 cycles at 1 A g-1 with 92.3% capacitance retention as well as excellent low temperature (-40 ºC) cycling performance (10 000 times at 0.2 A g-1). Universally, Zn//polyaniline full cell with 2 m Zn(OTf)2-90%DDm electrolyte manifests outstanding cycling performance in terms of 77.9% capacity retention after 2,000 cycles and a dendrite-free Zn anode. This work inspires new thinking of developing advanced hybrid electrolytes by cosolvent molecule design toward high-performance energy storage devices.

Bottom-Up Magnesium Deposition Induced by Paper-Based Triple-Gradient Scaffolds toward Flexible Magnesium Metal Batteries

The development of advanced magnesium metal batteries (MMBs) has been hindered by longstanding challenges, such as the inability to induce uniform magnesium (Mg) nucleation and the inefficient utilization of Mg foil. This study introduces a novel solution in the form of a flexible, lightweight, paper-based scaffold that incorporates gradient conductivity, magnesiophilicity, and pore size. This design is achieved through an industrially adaptable papermaking process in which the ratio of carboxylated multi-walled carbon nanotubes to softwood cellulose fibers is meticulously adjusted. The triple-gradient structure of the scaffold enables the regulation of Mg ion flux, promoting bottom-up Mg deposition. Owing to its high flexibility, low thickness, and reduced density, the scaffold has potential applications in flexible and wearable electronics. Accordingly, the triple-gradient electrodes exhibit stable operation for over 1200 h at 3 mA cm-2 /3 mAh cm-2 in symmetrical cells, markedly outperforming the non-gradient and metallic Mg alternatives. Notably, this study marks the first successful fabrication of a flexible MMB pouch full cell, achieving an impressive volumetric energy density of 244 Wh L-1 . The simplicity and scalability of the triple-gradient design, which uses readily available materials through an industrially compatible papermaking process, open new doors for the production of flexible, high-energy-density metal batteries.

Screening Selection of Hydrogen Evolution-Inhibiting and Zincphilic Alloy Anode for Aqueous Zn Battery

The hydrogen evolution reaction (HER) and Zn dendrites growth are two entangled detrimental effects hindering the application of aqueous Zn batteries. The alloying strategy is studied to be a convenient avenue to stabilize Zn anodes, but there still lacks global understanding when selecting reliable alloy elements. Herein, it is proposed to evaluate the Zn alloying elements in a holistic way by considering their effects on HER, zincphilicity, price, and environmental-friendliness. Screening selection sequence is established through the theoretical evaluation of 17 common alloying elements according to their effects on hydrogen evolution and Zn nucleation thermodynamics. Two alloy electrodes with opposite predicted effects are prepared for experimental demonstration, i.e., HER-inhibiting Bi and HER-exacerbating Ni. Impressively, the optimum ZnBi alloy anode exhibits one order of magnitude lower hydrogen evolution rate than that of the pure Zn, leading to an ultra-long plating/stripping cycling life for more than 11 000 cycles at a high current density of 20 mA cm-2 and 81% capacity retention for 170 cycles in a Zn-V2O5 pouch cell. The study not only proposes a holistic alloy selection principle for Zn anode but also identifies a practically effective alloy element.

Three-dimensional Ordered Macroporous Flexible Electrode Design toward High-Performance Zinc-Ion Batteries

Flexible zinc-ion batteries (ZIBs) have been considered to have huge potential in portable and wearable electronics due to their high safety, cost efficiency, and considerable energy density. Therein, the design and construction of flexible electrodes significantly determine the performance and lifespan of flexible battery devices. In this work, an ultrathin flexible three-dimensional ordered macroporous (3DOM) Sn@Zn anode (60 μm in thickness) is presented to relieve dendrite growth and expand the lifespan of flexible ZIBs. The 3DOM structure can ensure uniform electric field distribution, guide oriented zinc plating/stripping, and extend the lifespan of anodes. The rich zincophilic Sn sites on the electrode surface significantly facilitate Zn nucleation. Accordingly, a lowered nucleation overpotential of 8.9 mV and an ultralong cycling performance of 2400 h at 0.1 mA cm-2 and 0.1 mAh cm-2 are achieved in symmetric cells, and the 3DOM Sn@Zn anode can also operate in deep cycling for over 200 h at 10 mA cm-2 and 5 mAh cm-2. A flexible 3DOM MnO2/Ni cathode with a high structural stability and a high mass-specific capacity is fabricated to match with the anode to form a flexible ZIB with a total thickness of 200 μm. The flexible device delivers a high volumetric energy density of 11.76 mWh cm-3 at 100 mA gMnO2-1 and a high average open-circuit voltage of 1.5 V and exhibits high-performance power supply under deformation in practical application scenarios. This work may shed some light on the design and fabrication of flexible energy-storage devices.

Bio-Inspired Trace Hydroxyl-Rich Electrolyte Additives for High-Rate and Stable Zn-Ion Batteries at Low Temperatures

High-rate and stable Zn-ion batteries working at low temperatures are highly desirable for practical applications, but are challenged by sluggish kinetics and severe corrosion. Herein, inspired by frost-resistant plants, we report trace hydroxyl-rich electrolyte additives that implement a dual remodeling effect for high-performance low-temperature Zn-ion batteries. The additive with high Zn absorbability not only remodels Zn2+ primary solvent shell by alternating H2 O molecules, but also forms a shielding layer thus remodeling the Zn surface, which effectively enhances fast Zn2+ de-solvation reaction kinetics and prohibits Zn anode corrosion. Taking trace α-D-glucose (αDG) as a demonstration, the electrolyte obtains a low freezing point of -55.3 °C, and the Zn//Zn cell can stably cycle for 2000 h at 5 mA cm-2 under -25 °C, with a high cumulative capacity of 5000 mAh cm-2 . A full battery that stably operates for 10000 cycles at -50 °C is also demonstrated.

Design Strategies for Aqueous Zinc Metal Batteries with High Zinc Utilization: From Metal Anodes to Anode-Free Structures

Aqueous zinc metal batteries (AZMBs) are promising candidates for next-generation energy storage due to the excellent safety, environmental friendliness, natural abundance, high theoretical specific capacity, and low redox potential of zinc (Zn) metal. However, several issues such as dendrite formation, hydrogen evolution, corrosion, and passivation of Zn metal anodes cause irreversible loss of the active materials. To solve these issues, researchers often use large amounts of excess Zn to ensure a continuous supply of active materials for Zn anodes. This leads to the ultralow utilization of Zn anodes and squanders the high energy density of AZMBs. Herein, the design strategies for AZMBs with high Zn utilization are discussed in depth, from utilizing thinner Zn foils to constructing anode-free structures with theoretical Zn utilization of 100%, which provides comprehensive guidelines for further research. Representative methods for calculating the depth of discharge of Zn anodes with different structures are first summarized. The reasonable modification strategies of Zn foil anodes, current collectors with pre-deposited Zn, and anode-free aqueous Zn metal batteries (AF-AZMBs) to improve Zn utilization are then detailed. In particular, the working mechanism of AF-AZMBs is systematically introduced. Finally, the challenges and perspectives for constructing high-utilization Zn anodes are presented.

Understanding the Electrical Mechanisms in Aqueous Zinc Metal Batteries: From Electrostatic Interactions to Electric Field Regulation

Aqueous Zn metal batteries are considered as competitive candidates for next-generation energy storage systems due to their excellent safety, low cost, and environmental friendliness. However, the inevitable dendrite growth, severe hydrogen evolution, surface passivation, and sluggish reaction kinetics of Zn metal anodes hinder the practical application of Zn metal batteries. Detailed summaries and prospects have been reported focusing on the research progress and challenges of Zn metal anodes, including electrolyte engineering, electrode structure design, and surface modification. However, the essential electrical mechanisms that significantly influence Zn2+ ions migration and deposition behaviors have not been reviewed yet. Herein, in this review, the regulation mechanisms of electrical-related electrostatic repulsive/attractive interactions on Zn2+ ions migration, desolvation, and deposition behaviors are systematically discussed. Meanwhile, electric field regulation strategies to promote the Zn2+ ions diffusion and uniform Zn deposition are comprehensively reviewed, including enhancing and homogenizing electric field intensity inside the batteries and adding external magnetic/pressure/thermal field to couple with the electric field. Finally, future perspectives on the research directions of the electrical-related strategies for building better Zn metal batteries in practical applications are offered.

The Organic Ligand Etching Method for Constructing In Situ Terraced Protective Layer Toward Stable Aqueous Zn Anode

The stability of aqueous Zn-ion batteries (AZIBs) is highly dependent on the reversibility of stripping/plating Zn anode. In this work, an organic ligand etching method is proposed to develop a series of in situ multifunctional protective layers on Zn anode. Particularly, the 0.02 m [Fe(CN) 6]3- etching solutions can spontaneously etch the Zn anode, creating an in situ protective layer with unique terraced structure, which blocks the direct contact between the electrode and electrolyte and increases the area for Zn2+ ions deposition. Interestingly, all elements in the organic ligands (i.e., C, N, Zn, and Fe) exhibit strong zincophilic, significantly promoting zinc deposition kinetics and enhancing 3D nucleation behavior to inhibit zinc dendrite growth. As a result, the etched Zn anode can provide as high a Coulombic efficiency of 99.6% over 1000 cycles and sustain over 400 h long-term stability at a high current density of 10 mA cm-2 . As general validation, the small amount of metal cations additives (e.g., Ni2+ , Mn2+ , and Cu2+ ) can accelerate the synthesis of artificial interface layers with 3D structures and also regulate zinc deposition behavior. This work provides a new idea from the perspective of etching solution selection for surface modification of Zn metal anode.

3D Carbon Fiber Skeleton Film Modified with Gradient Cu Nanoparticles as Auxiliary Anode Regulates Dendrite-Free, Bottom-Up Zinc Deposition

Achieving stable Zn plating/stripping under high current density and large area capacity remains a major challenge for metal Zn anodes. To address this issue, common filter paper is utilized to construct 3D carbon fiber skeleton film modified with gradient Cu nanoparticles (CFF@Cu). The original zincophobic hydrophilic CFF is transformed into gradient zincophilic and reversed gradient hydrophilic composite, due to the gradient distribution of Cu nanoparticles. When CFF@Cu is placed above Zn foil as an auxiliary anode, Zn foil anode exhibits stable, reversible, and dendrite-free Zn plating/stripping for 1200 h at 10 mA cm-2 and 2 mAh cm-2 , 2000 h at 2 mA cm-2 and 2 mAh cm-2 , 340 h at 10 mA cm-2 and 10 mAh cm-2 . Additionally, nucleation barrier of Zn, Zn2+ transport and deposition kinetics are improved. The deposits on the Zn foil anode become homogeneous, dense, and fine. Side reactions and by-products are effectively inhibited. The excellent performance is mainly attributed to the gradient zincophilic field in 3D CFF. A portion of Zn2+ is captured by Cu and deposited within CFF@Cu from bottom to top, which reduces and homogenizes Zn2+ flux on Zn foil, as well as weakens and homogenizes electric field on Zn foil.

Highly Reversible Zn Anodes Achieved by Enhancing Ion-Transport Kinetics and Modulating Zn (002) Deposition

Uncontrolled dendrite growth and water-related side reactions in mild electrolytes are the main causes of poor cycling stability of zinc anodes, resulting in the deterioration of aqueous zinc-based batteries. Herein, a multifunctional fluorapatite (Ca5(PO4)3F) aerogel (FAG) interface layer is proposed to realize highly stable zinc anodes via the integrated regulation of Zn2+ migration kinetics and Zn (002) orientation deposition. Owing to the well-defined aerogel nanochannels and the rich Zn2+ adsorption sites resulting from the ion exchange between Ca2+ and Zn2+, the FAG interface layer could significantly accelerate the Zn2+ migration and effectively homogenize the Zn2+ flux and nucleation sites, thus promoting rapid and uniform Zn2+ migration at the electrode/electrolyte interface. Additionally, during the cycling process, the F atoms from FAG promote the in situ generation of ZnF2, which facilitates the manipulation of the preferred Zn (002) orientation deposition, thus efficiently suppressing dendrite growth and side reactions by combining with the above synergistic effects. Consequently, the FAG-modified Zn anode displays a stable cycle life of over 4000 h at 1 mA cm-2 and exhibits highly reversible Zn plating/stripping behavior. Meanwhile, the Zn||MnO2 full cells exhibit improved cycle stability over 2000 cycles compared with that of the bare Zn, highlighting the virtues of the FAG protective layer for highly reversible Zn anodes. Our work brings the insight in to stabilize Zn anodes and power the commercial applications of aqueous zinc-based batteries.

Subnanocyclic Molecule of 15-Crown-5 Inhibiting Interfacial Water Decomposition and Stabilizing Zinc Anodes via Regulation of Zn2+ Solvation Shell

Aqueous zinc ion batteries exhibit a promising application prospect for next-generation energy storage devices. However, the decomposition of active H2O molecules on the Zn anode induces drastic dendrite formation, thereby impairing the performance for entire devices. To solve this challenge, we introduce subnanocyclic molecules of 15-Crown-5 as an additive into ZnSO4 electrolyte to stabilize the Zn anode. Owing to the binding property of crown ethers with alkali metal ions and the size-fit rule, the 15-Crown-5 additives enable effective regulation of the solvation structure of hydrated Zn2+ and reduce the efficient contact between Zn anode and active H2O, which are validated by the experimental analysis and theoretical calculations. Under the assistance of the 15-Crown-5 additive, the as-assembled Zn-based batteries deliver superior performance compared with ZnSO4 and 18-Crown-6contaning ZnSO4 electrolytes. This work shows a bright direction toward progress in aqueous batteries.

An Ultrathin Inorganic Molecular Crystal Interfacial Layer for Stable Zn Anode

Zn metal anode suffers from dendrite growth and side reactions during cycling, significantly deteriorating the lifespan of aqueous Zn metal batteries. Herein, we introduced an ultrathin and ultra-flat Sb2 O3 molecular crystal layer to stabilize Zn anode. The in situ optical and atomic force microscopes observations show that such a 10 nm Sb2 O3 thin layer could ensure uniform under-layer Zn deposition with suppressed tip growth effect, while the traditional WO3 layer undergoes an uncontrolled up-layer Zn deposition. The superior regulation capability is attributed to the good electronic-blocking ability and low Zn affinity of the molecular crystal layer, free of dangling bonds. Electrochemical tests exhibit Sb2 O3 layer can significantly improve the cycle life of Zn anode from 72 h to 2800 h, in contrast to the 900 h of much thicker WO3 even in 100 nm. This research opens up the application of inorganic molecular crystals as the interfacial layer of Zn anode.

Nanomicellar Electrolyte To Control Release Ions and Reconstruct Hydrogen Bonding Network for Ultrastable High-Energy-Density Zn-Mn Battery

Zn-Mn batteries with two-electron conversion reactions simultaneously on the cathode and anode harvest a high voltage plateau and high energy density. However, the zinc anode faces dendrite growth and parasitic side reactions while the Mn2+/MnO2 reaction on the cathode involves oxygen evolution and possesses poor reversibility. Herein, a novel nanomicellar electrolyte using methylurea (Mu) has been developed that can encapsulate ions in the nanodomain structure to guide the homogeneous deposition of Zn2+/Mn2+ in the form of controlled release under an external electric field. Consecutive hydrogen bonding network is broken and a favorable local hydrogen bonding system is established, thus inhibiting the water-splitting-derived side reactions. Concomitantly, the solid-electrolyte interface protective layer is in situ generated on the Zn anode, further circumventing the corrosion issue resulting from the penetration of water molecules. The reversibility of the Mn2+/MnO2 conversion reaction is also significantly enhanced by regulating interfacial wettability and improving nucleation kinetics. Accordingly, the modified electrolyte endows the symmetric Zn∥Zn cell with extended cyclic stability of 800 h with suppressed dendrites growth at an areal capacity of 1 mAh cm-2. The assembled Zn-Mn electrolytic battery also demonstrates an exceptional capacity retention of nearly 100% after 800 cycles and a superior energy density of 800 Wh kg-1 at an areal capacity of 0.5 mAh cm-2.

Ultraviolet-Assisted Printing of Flexible Solid-State Zn-Ion Battery with a Heterostructure Electrolyte

Flexible solid-state Zn-ion batteries (ZIBs) have garnered considerable attention for next-generation power sources, but the corrosion, dendrite growth, and interfacial problems severely hinder their practical applications. Herein, a high-performance flexible solid-state ZIB with a unique heterostructure electrolyte is facilely fabricated through ultraviolet-assisted printing strategy. The solid polymer/hydrogel heterostructure matrix not only isolates water molecules and optimizes electric field distribution for dendrite-free anode, but also facilitates fast and in-depth Zn2+ transport in the cathode. The in situ ultraviolet-assisted printing creates cross-linked and well-bonded interfaces between the electrodes and the electrolyte, enabling low ionic transfer resistance and high mechanical stability. As a result, the heterostructure electrolyte based ZIB outperforms single-electrolyte based cells. It not only delivers a high capacity of 442.2 mAh g-1 with long cycling life of 900 cycles at 2 A g-1 , but also maintains stable operation under mechanical bending and high-pressure compression in a wide temperature range (-20 °C to 100 °C).

Recent Advances in Structural Optimization and Surface Modification on Current Collectors for High-Performance Zinc Anode: Principles, Strategies, and Challenges

The last several years have witnessed the prosperous development of zinc-ion batteries (ZIBs), which are considered as a promising competitor of energy storage systems thanks to their low cost and high safety. However, the reversibility and availability of this system are blighted by problems such as uncontrollable dendritic growth, hydrogen evolution, and corrosion passivation on anode side. A functionally and structurally well-designed anode current collectors (CCs) is believed as a viable solution for those problems, with a lack of summarization according to its working mechanisms. Herein, this review focuses on the challenges of zinc anode and the mechanisms of modified anode CCs, which can be divided into zincophilic modification, structural design, and steering the preferred crystal facet orientation. The possible prospects and directions on zinc anode research and design are proposed at the end to hopefully promote the practical application of ZIBs.

Highly Reversible Zn Metal Anodes Enabled by Increased Nucleation Overpotential

Dendrite formation severely compromises further development of zinc ion batteries. Increasing the nucleation overpotential plays a crucial role in achieving uniform deposition of metal ions. However, this strategy has not yet attracted enough attention from researchers to our knowledge. Here, we propose that thermodynamic nucleation overpotential of Zn deposition can be boosted through complexing agent and select sodium L-tartrate (Na-L) as example. Theoretical and experimental characterization reveals L-tartrate anion can partially replace H2O in the solvation sheath of Zn2+, increasing de-solvation energy. Concurrently, the Na+ could absorb on the surface of Zn anode preferentially to inhibit the deposition of Zn2+ aggregation. In consequence, the overpotential of Zn deposition could increase from 32.2 to 45.1 mV with the help of Na-L. The Zn-Zn cell could achieve a Zn utilization rate of 80% at areal capacity of 20 mAh cm-2. Zn-LiMn2O4 full cell with Na-L additive delivers improved stability than that with blank electrolyte. This study also provides insight into the regulation of nucleation overpotential to achieve homogeneous Zn deposition.

In Situ Trapping Strategy Enables a High-Loading Ni Single-Atom Catalyst as a Separator Modifier for a High-Performance Li-S Battery

The poor electrochemical reaction kinetics of Li polysulfides is a key barrier that prevents the Li-S batteries from widespread applications. Ni single atoms dispersed on carbon matrixes derived from ZIF-8 are a promising type of catalyst for accelerating the conversion of active sulfur species. However, Ni favors a square-planar coordination that can only be doped on the external surface of ZIF-8, leading to a low loading amount of Ni single atoms after pyrolysis. Herein, we demonstrate an in situ trapping strategy to synthesize Ni and melamine-codoped ZIF-8 precursor (Ni-ZIF-8-MA) by simultaneously introducing melamine and Ni during the synthesis of ZIF-8, which can remarkably decrease the particle size of ZIF-8 and further anchor Ni via Ni-N₆ coordination. Consequently, a novel high-loading Ni single-atom (3.3 wt %) catalyst implanted in an N-doped nanocarbon matrix (Ni@NNC) is obtained after high-temperature pyrolysis. This catalyst as a separator modifier shows a superior catalytic effect on the electrochemical transitions of Li polysulfides, which endows the corresponding Li-S batteries with a high specific capacity of 1232.4 mA h g^-1 at 0.3 C and an excellent rate capability of 814.9 mA h g^-1 at 3 C. Furthermore, a superior areal capacity of 4.6 mA h cm^-2 with stable cycling over 160 cycles can be achieved under a critical condition with a low electrolyte/sulfur ratio (8.4 μL mg^-1) and high sulfur loading (4.85 mg cm^-2). The outstanding electrochemical performances can be attributed to the strong adsorption and fast conversion of Li polysulfides on the highly dense active sites of Ni@NNC. This intriguing work provides new inspirations for designing high-loading single-atom catalysts applied in Li-S batteries.

200 MPa cold isostatic pressing creates surface-microcracks in a Zn foil for scalable and long-life zinc anodes

The Zn anode suffers from severe dendrite growth and side reactions, which restrict its development in the realm of large-scale energy storage. Herein, in this study, we propose a method to create surface-microcracks in a Zn foil by 200 MPa cold isostatic pressing. The proposed pressing method can avoid the surface tip effect of Zn, and creates a subtly surface-microcracked zinc structure, providing more zinc ion transport channels, thereby effectively alleviating the dendrite growth and side reactions during the repeated Zn plating and stripping. Benefiting from these advantages, the 200 MPa Zn‖Zn symmetric cell can achieve a long cycle life (1525 h) of 1 mA h cm-2 at 2 mA cm-2. The 200 MPa Zn‖VO2 full cell can still maintain a capacity of 110 mA h g-1 after 1000 cycles at 0.1 A g-1. In addition, assembled pouch cells also show excellent cycling stability. The proposed cold isostatic pressing method is compatible with large-scale production applications and provides an effective strategy for realizing high-performance zinc anodes for zinc-ion batteries.