Anchoring CoFe2O4 Nanoparticles on N-Doped Carbon Nanofibers for High-Performance Oxygen Evolution Reaction

Perovskite Type ABO3 Oxides in Photocatalysis, Electrocatalysis, and Solid Oxide Fuel Cells: State of the Art and Future Prospects

Since photocatalytic and electrocatalytic technologies are crucial for tackling the energy and environmental challenges, significant efforts have been put into exploring advanced catalysts. Among them, perovskite type ABO3 oxides show great promising catalytic activities because of their flexible physical and chemical properties. In this review, the fundamentals and recent progress in the synthesis of perovskite type ABO3 oxides are considered. We describe the mechanisms for electrocatalytic oxygen evolution reactions (OER), oxygen reduction reactions (ORR), hydrogen evolution reactions (HER), nitrogen reduction reactions (NRR), carbon dioxide reduction reactions (CO2RR), and metal-air batteries in details. Furthermore, the photocatalytic water splitting, CO2 conversion, pollutant degradation, and nitrogen fixation are reviewed as well. We also stress the applications of perovskite type ABO3 oxides in solid oxide fuel cells (SOFs). Finally, the optimization of perovskite type ABO3 oxides for applications in various fields and an outlook on the current and future challenges are depicted. The aim of this review is to present a broad overview of the recent advancements in the development of perovskite type ABO3 oxides-based catalysts and their applications in energy conversion and environmental remediation, as well as to present a roadmap for future development in these hot research areas.

Self-Etching Synthesis of Superhydrophilic Iron-Rich Defect Heterostructure-Integrated Catalyst with Fast Oxygen Evolution Kinetics for Large-Current Water Splitting

Developing catalysts with rich metal defects, strong hydrophilicity, and extensive grain boundaries is crucial for enhancing the kinetics of electrocatalytic water oxidation and facilitating large-current water splitting. In this study, we utilized pH-controlled etching and gas-phase phosphating to synthesize a flower-like Ni2P-FeP4-Cu3P modified nickel foam heterostructure catalyst. This catalyst features pronounced hydrophilicity and a high concentration of Fe defects. It exhibits low overpotentials of 156 mV and 210 mV at current densities of 10 and 100 mA cm-2 respectively, and maintains stability for up to 200 h at 100 mA cm-2 with only 7.3 % degradation, showcasing outstanding electrocatalytic water oxidation performance. Furthermore, when integrated into a Ni2P-FeP4-Cu3P/NF||Pt-C/NF electrolyzer, it achieves excellent overall water splitting performance, reaching current densities of 10 and 400 mA cm-2 at just 1.47 V and 1.73 V, respectively, and operates stably for 60 h at 500 mA cm-2 with minimal degradation. Analysis indicates that high-valence oxyhydroxides/phosphides of Ni, Fe, and Cu act as the primary active species. The presence of abundant Fe defects enhances electron transfer, strong hydrophilicity improves electrolyte contact, and numerous grain boundaries synergistically modulate the activation energy between active sites and oxygen-containing intermediates, significantly improving the kinetics of water oxidation.

Boosting the Production of Hydrogen from an Overall Urea Splitting Reaction Using a Tri-Functional Scandium-Cobalt Electrocatalyst

The creation of highly efficient and economical electrocatalysts is essential to the massive electrolysis of water to produce clean energy. The ability to use urea reaction of oxidation (UOR) in place of the oxygen/hydrogen evolution process (OER/HER) during water splitting is a significant step toward the production of high-purity hydrogen with less energy usage. Empirical evidence suggests that the UOR process consists of two stages. First, the metal sites undergo an electrochemical pre-oxidation reaction, and then the urea molecules on the high-valence metal sites are chemically oxidized. Here, the use of scandium-doped CoTe supported on carbon nanotubes called Sc@CoTe/CNT is reported and CoTe/CNT as a composite to efficiently promote hydrogen generation from highly durable and active electrocatalysts for the OER/UOR/HER in urea and alkali solutions. Electrochemical impedance spectroscopy indicates that the UOR facilitates charge transfer across the interface. Furthermore, the Sc@CoTe/CNT nanocatalyst has high performance in KOH and KOH-containing urea solutions as demonstrated by the HER, OER, and UOR (215 mV, 1.59, and 1.31 V, respectively, at 10 mA cm-2 in 1 m KOH) and CoTe/CNT shows 195 mV, 1.61 and 1.3 V, respectively. Consequently, the total urea splitting system achieves 1.29 V, whereas the overall water splitting device obtaines 1.49 V of Sc@CoTe/CNT and CoTe/CNT shows 1.54, 1.48 V, respectively. This work presents a viable method of combining HER with UOR for maximally effective hydrogen production.

High-Performance Bimetallic Electrocatalysts for Hydrogen Evolution Reaction Using N-Doped Graphene-Supported N-Co6Mo6C

Hydrogen has garnered considerable attention as a promising energy source for addressing contemporary environmental degradation and energy scarcity challenges. Electrocatalytic water splitting for hydrogen production has emerged as an environmentally friendly and versatile method, offering high purity. However, the development of cost-effective electrocatalytic catalysts using abundant and inexpensive materials is crucial. In this study, we successfully synthesized nitrogen-doped Co6Mo6C supported on nitrogen-doped graphene (N-Co6Mo6C/NC). The catalyst exhibited high performance and durability in alkaline electrolytes (1.0 M KOH) for hydrogen evolution, showcasing an overpotential of 185 mV at a current density of 100 mA cm-2 and a Tafel slope of 80 mV dec-1. These findings present a novel avenue for the fabrication of efficient bimetallic carbide catalysts.

Iron-Cobalt Nanoparticles Embedded in B,N-Doped Chitosan-Derived Porous Carbon Aerogel for Overall Water Splitting

Given their intriguing properties, porous carbons have surfaced as promising electrocatalysts for various energy conversion reactions. This study presents a unique approach where iron-cobalt (FeCo) is confined in a boron, nitrogen-doped chitosan-derived porous carbon aerogel (BNPC-FeCo) to serve as an electrocatalyst for the hydrogen evolution and oxygen evolution reactions (HER and OER). The BNPC-FeCo-900 electrocatalyst demonstrates excellent catalyst activity, with very low overpotentials of 186 and 320 mV at 10 mA cm-2, low Tafel slopes of 82 and 55 mV dec-1, and low charge transfer resistance of 2.68 and 9.25 Ω for HER and OER, respectively. Density functional theory (DFT) calculations further reveal that the cooperation between the boron, nitrogen codoped porous carbon, and the FeCo nanoparticles reduces intermediates' energy barriers, significantly enhancing the HER and OER performance. In conclusion, this work offers significant and informative perspectives into the potential of porous carbon materials as dual-purpose electrocatalysts for water splitting.

Fe- and S-Modified BiOI as Catalysts to Oxygen Evolution and Hydrogen Evolution Reactions in Overall Photoelectrochemical Water Splitting

Developing catalysts with superior activity to hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is equally important to the overall photoelectrochemical water splitting to produce hydrogen. In this work, bismuth oxyiodide (BiOI), iron-modified bismuth iodide Fe/BiOI, and the sulfurized S-Fe/BiOI were prepared using the solvothermal method. The three materials all have good absorption ability for visible light. The photoelectrochemical catalytic activity of BiOI to oxygen evolution reaction (OER) is significantly enhanced after iron modification, while the sulfurized product S-Fe/BiOI exhibits better catalytic activity to hydrogen evolution reaction (HER). Hence, OER and HER can be simultaneously catalyzed by using Fe/BiOI and S-Fe/BiOI as anodic and cathodic catalysts to facilitate the overall photoelectrochemical water splitting process.

Metal Alloys-Structured Electrocatalysts: Metal-Metal Interactions, Coordination Microenvironments, and Structural Property-Reactivity Relationships

Metal alloys-structured electrocatalysts (MAECs) have made essential contributions to accelerating the practical applications of electrocatalytic devices in renewable energy systems. However, due to the complex atomic structures, varied electronic states, and abundant supports, precisely decoding the metal-metal interactions and structure-activity relationships of MAECs still confronts great challenges, which is critical to direct the future engineering and optimization of MAECs. Here, this timely review comprehensively summarizes the latest advances in creating the MAECs, including the metal-metal interactions, coordination microenvironments, and structure-activity relationships. First, the fundamental classification, design, characterization, and structural reconstruction of MAECs are outlined. Then, the electrocatalytic merits and modulation strategies of recent breakthroughs for noble and non-noble metal-structured MAECs are thoroughly discussed, such as solid solution alloys, intermetallic alloys, and single-atom alloys. Particularly, unique insights into the bond interactions, theoretical understanding, and operando techniques for mechanism disclosure are given. Thereafter, the current states of diverse MAECs with a unique focus on structural property-reactivity relationships, reaction pathways, and performance comparisons are discussed. Finally, the future challenges and perspectives for MAECs are systematically discussed. It is believed that this comprehensive review can offer a substantial impact on stimulating the widespread utilization of metal alloys-structured materials in electrocatalysis.

Recent progress in the development of advanced support materials for electrocatalysis

Electrocatalytic materials are pivotal for clean chemical production and energy conversion in devices like electrolyzers and fuel cells. These materials usually consist of metallic nanoparticles which serve as active reaction sites, and support materials which provide high surface area, conductivity and stability. When designing novel electrocatalytic composites, the focus is often on the metallic sites, however, the significance of the support should not be overlooked. Carbon materials, valued for their conductivity and large surface area, are commonly used as support in benchmark electrocatalysts. However, using alternative support materials instead of carbon can be beneficial in certain cases. In this minireview, we summarize recent advancements and key directions in developing novel supports for electrocatalysis, encompassing both carbon and non-carbon materials.

Self-Enhancement of Water Electrolysis by Electrolyte-Poled Ferroelectric Catalyst

Efficient and durable electrocatalysts with superior activity are needed for the production of green hydrogen with a high yield and low energy consumption. Electrocatalysts based on transition metal oxides hold dominance due to their abundant natural resources, regulable physical properties, and good adaptation to a solution. In numerous oxide catalyst materials, ferroelectrics, possessing semiconducting characteristics and switchable spontaneous polarization, have been considered promising photoelectrodes for solar water splitting. However, few investigations noted their potential as electrocatalysts. In this study, we report an efficient electrocatalytic electrode made of a BiFeO3/nickel foam heterostructure, which displays a smaller overpotential and higher current density than the blank nickel foam electrode. Moreover, when in contact with an alkaline solution, the bond between hydroxyls and the BiFeO3 surface induces a large area of upward self-polarization, lowering the adsorption energy of subsequent adsorbates and facilitating oxygen and hydrogen evolution reaction. Our work demonstrates an infrequent pathway of using functional semiconducting materials for exploiting highly efficient electrocatalytic electrodes.

N, S codoped carbon matrix-encapsulated CoFe/Co0.2Fe0.8S heterostructure as a highly efficient and durable bifunctional oxygen electrocatalyst for rechargeable zinc-air batteries

The realization of durable and efficient oxygen evolution reactions (OER) at large current densities and low overpotentials is of significant importance but remains a great challenge. In this study, a CoFe/Co_0.2Fe_0.8S@NS-CNTs/CC (CF/CFS@NS-CNTs/CC) heterogeneous structure was fabricated by isolating CoFe/Co_0.2Fe_0.8S (CF/CFS) particles locked in nitrogen/sulfur codoped carbon nanotubes (NS-CNTs). Appreciable oxygen evolution reaction activity and durability was achieved with an ultralow overpotential of 110 mV at 10 mA•cm^-2. The operation was stable for 300 h at a current density of 500 mA•cm^-2. The structure was then assembled into a zinc-air battery (ZAB), which delivered a high power density of 194 mW•cm^-2, a specific capacity of 837.3 mAh•g_Zn^-1, and stable operation for 788 h without obvious voltage attenuation and altered morphology. The electronic interactions were studied by X-ray photoelectron spectroscopy (XPS), which revealed that both the bimetal components and the synergistic effect at the interface stimulated the transfer of Co and Fe sites to higher chemical valence states. Theoretical calculations indicated that the synergistic effect of the bimetal components, build-in interfacial potential, and surface chemical reconstruction adjusted the Fermi level to optimize the thermodynamic formation of O* to OOH*, thus enhancing the intrinsic activity.

Entropy-Stabilized Multicomponent Porous Spinel Nanowires of NiFeXO4 (X = Fe, Ni, Al, Mo, Co, Cr) for Efficient and Durable Electrocatalytic Oxygen Evolution Reaction in Alkaline Medium

Cost-effective electrochemical water splitting technology hinges on the development of efficient and durable catalysts for oxygen evolution reaction (OER). Spinel oxides (formula: AxB3-xO4) are structurally stable for real applications. Much effort has been devoted to improving the catalytic activity. Here, we report a eutectic dealloying strategy to activate the porous spinel NiFe2O4 nanowires with up to four metal cation substitutions. As-obtained spinel NiFeXO4 (X = Fe, Ni, Al, Mo, Co, Cr) delivers a benchmark current density of 10 mA·cm-2 at an overpotential of only 195 mV, outperforming most spinel phase OER electrocatalysts and comparable to the state-of-the-art NiFe hydroxides. It is stable for over 115 h of electrolysis. Aberration-corrected transmission electron microscopy, high-resolution electron energy loss spectroscopy, and atomic-scale strain mappings reveal that the multivalent cation substitutions result in substantial lattice distortion and significant electronic coupling of metal 3d and O 2p orbitals for increased covalency. Further theoretical calculations suggest that the NiFeXO4 are stabilized by the high configurational entropy, and their synergy favors the absorption of H2O molecules and lowers the adsorption energy barrier of the OOH* intermediate. The improved intrinsic activity together with the highly nanoporous structures contribute to the appealing apparent catalytic performances. The work demonstrates an effective approach for the synthesis of stable multicomponent spinel oxides and highlights the effectiveness of the multication substitution strategy for producing highly durable and active spinel catalysts, which meet multiplexed structure and superior property requirements in practical applications.

Unravelling faradaic electrochemical efficiencies over Fe/Co spinel metal oxides using surface spectroscopy and microscopy techniques

Cobalt and iron metal-based oxide catalysts play a significant role in energy devices. To unravel some interesting parameters, we have synthesized metal oxides of cobalt and iron (i.e. Fe₂O₃, Co₃O₄, Co₂FeO₄ and CoFe₂O₄), and measured the effect of the valence band structure, morphology, size and defects in the nanoparticles towards the electrocatalytic hydrogen evolution reaction (HER), the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR). The compositional variations in the cobalt and iron precursors significantly alter the particle size from 60 to <10 nm and simultaneously the shape of the particles (cubic and spherical). The Tauc plot obtained from the solution phase ultraviolet (UV) spectra of the nanoparticles showed band gaps of 2.2, 2.3, 2.5 and 2.8 eV for Fe₂O₃, Co₃O₄, Co₂FeO₄ and CoFe₂O₄, respectively. Further, the valence band structure and work function analysis using ultraviolet photoelectron spectroscopy (UPS) and core level X-ray photoelectron spectroscopy (XPS) analyses provided better structural insight into metal oxide catalysts. In the Co₃O₄ system, the valence band structure favors the HER and Fe₂O₃ favors the OER. The composites Co₂FeO₄ and CoFe₂O₄ show a significant change in their core level (O 1s, Co 2p and Fe 2p spectra) and valence band structure. Co₃O₄ shows an overpotential of 370 mV against 416 mV for Fe₂O₃ at a current density of 2 mA cm^-2 for the HER. Similarly, Fe₂O₃ shows an overpotential of 410 mV against the 435 mV for Co₃O₄ at a current density of 10 mA cm^-2 for the OER. However, for the ORR, Co₃O₄ shows 70 mV improvement in the half-wave potential against Fe₂O₃. The composites (Co₂FeO₄ and CoFe₂O₄) display better performance compared to their respective parent oxide systems (i.e., Co₃O₄ and Fe₂O₃, respectively) in terms of the ORR half-wave potential, which can be attributed to the presence of the oxygen vacancies over the surface in these systems. This was further corroborated in density functional theory (DFT) simulations, wherein the oxygen vacancy formation on the surface of CoFe₂O₄(001) was calculated to be significantly lower (∼50 kJ mol^-1) compared to Co₃O₄ (001). The band diagram of the nanoparticles constructed from the various spectroscopic measurements with work function and band gap provides in-depth understanding of the electrocatalytic process.

One-Dimensional CoMoP Nanostructures as Bifunctional Electrodes for Overall Water Splitting

As high-quality substitutes for conventional catalysts, the bifunctional catalytic properties of the coating of transition-metal-based materials are pivotal for improving water-splitting efficiency. Herein, cobalt-molybdenum bimetallic phosphide nanofibers (CoMoP NFs) were synthesized via a series of facile strategies, which are divided into pyrolysis electrospun PAN and metal salts, to obtain one-dimensional morphology and a gas-solid phosphating precursor. The obtained CoMoP NFs catalyst has superior catalytic activity performance in 1M KOH. Serving as an oxygen evolution reaction (OER) catalyst, the electrode of the CoMoP NFs affords different kinds of current densities at 50 mA cm^-2 and 100 mA cm^-2, with low overpotentials of 362 and 391 mV, respectively. In addition, the hydrogen evolution reaction (HER) performance of the CoMoP NFs mainly shows when under a low overpotential of 126 mV, which can deliver a current density of 10 mA cm^-2. In order to further detect the stability of the catalyst, we used multiple cyclic voltammetry and chronopotentiometry tests for OERs and HERs, which maintain performance and carry a current density of 10 mA cm^-2 for longer. As an integrated high-performance bifunctional electrode for overall water splitting, the CoMoP NFs only require 1.75 V@10 mA cm^-2 for 40 h. This work highlights a facile method to create an electrocatalyst with fiber nanostructures which possesses excellent activity as an alkaline electrolyte.

Recent Progress on Bimetallic-Based Spinels as Electrocatalysts for the Oxygen Evolution Reaction

Electrocatalytic water splitting is a promising and viable technology to produce clean, sustainable, and storable hydrogen as an energy carrier. However, to meet the ever-increasing global energy demand, it is imperative to develop high-performance non-precious metal-based electrocatalysts for the oxygen evolution reaction (OER), as the OER is considered the bottleneck for electrocatalytic water splitting. Spinels, in particular, are considered promising OER electrocatalysts due to their unique properties, precise structures, and compositions. Herein, the recent progress on the application of bimetallic-based spinels (AFe₂ O₄ , ACo₂ O₄ , and AMn₂ O₄ ; where A = Ni, Co, Cu, Mn, and Zn) as electrocatalysts for the OER is presented. The fundamental concepts of the OER are highlighted after which the family of spinels, their general formula, and classifications are introduced. This is followed by an overview of the various classifications of bimetallic-based spinels and their recent developments and applications as OER electrocatalysts, with special emphasis on enhancing strategies that have been formulated to improve the OER performance of these spinels. In conclusion, this review summarizes all studies mentioned therein and provides the challenges and future perspectives for bimetallic-based spinel OER electrocatalysts.

Unveiling the Coercivity-Induced Electrocatalytic Oxygen Evolution Activity of Single-Domain CoFe2O4 Nanocrystals under a Magnetic Field

Spin polarization modulation in ferromagnetic materials has become an effective way to promote the electrocatalytic oxygen evolution reaction (OER). Herein, to reveal the coercivity-related OER performance, single-domain ferromagnetic CoFe₂O₄ (CFO) nanocrystals with different coercivities are synthesized and subjected to OER under an in situ tunable magnetic field. As the more ordered spin polarization state of CFO with a higher coercivity can afford a facilitated electron transfer process, the magnetic field-assisted OER activity can be more improved with an increase in coercivity. Specifically, the decreased magnitudes of the overpotential, Tafel slope, and charge transfer resistance increase on the samples with higher coercivity. The CFO with the largest coercivity (7500 Oe) shows the best OER performance with an overpotential of 350 mV at a current density of 10 mA cm^-2 under a magnetic field of 14000 G. In addition, a hysteresis effect that maintains enhanced OER current density after the magnetic field has been withdrawn is observed, where higher coercivity affords a longer hysteresis period. The exploration of coercivity-related OER enhancement may provide new insights into the design and synthesis of promising "magnetic effect" catalysts.

Anchoring Ni/NiO heterojunction on freestanding carbon nanofibers for efficient electrochemical water oxidation

Rational design of low-cost and efficient electrocatalyst for the anodic oxygen evolution reaction (OER) to replace noble-metal-based catalysts is greatly desired for the large-scale application of water electrocatalysis. And compared with the conventional powdery catalysts, the freestanding electrode architecture is more attractive owing to the enhanced kinetics and stability. In this work, we report an electrospinning-carbonization-post oxidation strategy to develop the freestanding N-doped carbon nanofibers anchored with Ni/NiO nanoparticles (denoted as Ni/NiO-NCNFs) as efficient OER electrocatalyst. In the synthesized Ni/NiO-NCNFs, the conductive ultrathin carbon layer could promote electron transfer and thus improve the electrocatalytic activity. Meanwhile, the ratio between Ni and NiO could be regulated by tuning the oxidation duration, so as to optimize the adsorption energy of intermediates and improve the OER activity. The Ni/NiO-NCNFs prepared with the oxidation time of 3 h exhibit a promising OER activity and long-term operation durability in 0.1 M KOH solution, requiring an overpotential as small as 153 mV to achieve a current density of 10 mA cm^-2. Its overpotential is far lower than that of the reported OER catalysts. This work offers an efficient pathway to develop low-cost and highly active freestanding transitional metal-based OER electrocatalyst for potential renewable electrochemical energy conversion.

Characterization of Carbon Nanostructures by Photoelectron Spectroscopies

Recently, the scientific community experienced two revolutionary events. The first was the synthesis of single-layer graphene, which boosted research in many different areas. The second was the advent of quantum technologies with the promise to become pervasive in several aspects of everyday life. In this respect, diamonds and nanodiamonds are among the most promising materials to develop quantum devices. Graphene and nanodiamonds can be coupled with other carbon nanostructures to enhance specific properties or be properly functionalized to tune their quantum response. This contribution briefly explores photoelectron spectroscopies and, in particular, X-ray photoelectron spectroscopy (XPS) and then turns to the present applications of this technique for characterizing carbon nanomaterials. XPS is a qualitative and quantitative chemical analysis technique. It is surface-sensitive due to its limited sampling depth, which confines the analysis only to the outer few top-layers of the material surface. This enables researchers to understand the surface composition of the sample and how the chemistry influences its interaction with the environment. Although the chemical analysis remains the main information provided by XPS, modern instruments couple this information with spatial resolution and mapping or with the possibility to analyze the material in operando conditions at nearly atmospheric pressures. Examples of the application of photoelectron spectroscopies to the characterization of carbon nanostructures will be reviewed to present the potentialities of these techniques.

Centrifugal Spinning Enables the Formation of Silver Microfibers with Nanostructures

Silver nanowires (AgNWs) have received much attention and application in transparent electrodes, wearable electronic devices, and sensors. The hope is for these nanowires to eventually replace the most commonly used transparent electrode material—indium tin oxide (ITO). However, electrospinning used for the preparation of AgNWs on a large scale is limited by its low productivity and high electric field, while the alcohol-thermal method is limited to mixing by-product silver nanoparticles in silver nanowires. We demonstrate a novel and simple centrifugal spinning approach in order to successfully fabricate ultra-long silver microfibers based on AgNO₃ and polyvinyl pyrrolidone (PVP). The centrifugal-spun precursor fiber and silver fiber can be prepared to as thin as 390 and 310 nm, respectively. Annealed fibers show typical nanostructures with grains down to a minimum size of 51 nm. Combinations of different parameters, including concentrations of PVP, needle size, and annealing temperature are also investigated, in order to optimize the spinning process of ultra-long silver microfibers. The feasibility of preparing silver microfibers by centrifugal spinning is preliminarily verified, examining prospects for mass production. Furthermore, numerous strategies related to assisting the creation of silver nanofibers using centrifugal spinning are presented as possibilities in future development.

Transformation of CoFe2O4 spinel structure into active and robust CoFe alloy/N-doped carbon electrocatalyst for oxygen evolution reaction

Electrochemical water splitting is an environmentally benign technology employed for H₂ production; however, it is critically hampered by the sluggish kinetics of the oxygen evolution reaction (OER) at the positive electrode. In this work, nitrogen-doped carbon-coated CoFe electrocatalysts were synthesized via a three-step route comprising (1) hydrothermal reaction, (2) in-situ polymerization of dopamine and (3) carbonization. The effect of carbonized polydopamine on the overall physicochemical properties and electrochemical activity of CoFe catalysts was systematically studied. By controlling and optimizing the ratio of CoFe₂O₄ and dopamine contents, a transformation of the CoFe₂O₄ structure to CoFe alloy was observed. It was found that CoFe/NC_30% (prepared with 30% dopamine) exhibits an excellent catalytic activity towards OER. A small overpotential of 340 mV was required to generate a current density of 10 mA cm^-2 in a 1.0 M KOH electrolyte. More importantly, the CoFe/NC_30% catalyst reflected exceptional durability for at least 24 h. This research sheds light on the development of affordable, highly efficient, and durable electrocatalysts for OER.

Emerging polymeric electrospun fibers: From structural diversity to application in flexible bioelectronics and tissue engineering

Electrospinning (e-spin) technique has emerged as a versatile and feasible pathway for constructing diverse polymeric fabric structures, which show potential applications in many biological and biomedical fields. Owing to the advantages of adjustable mechanics, designable structures, versatile surface multi-functionalization, and biomimetic capability to natural tissue, remarkable progress has been made in flexible bioelectronics and tissue engineering for the sensing and therapeutic purposes. In this perspective, we review recent works on design of the hierarchically structured e-spin fibers, as well as, the fabrication strategies from one-dimensional individual fiber (1D) to three-dimensional (3D) fiber arrangements adaptive to specific applications. Then, we focus on the most cutting-edge progress of their applications in flexible bioelectronics and tissue engineering. Finally, we propose future challenges and perspectives for promoting electrospun fiber-based products toward industrialized, intelligent, multifunctional, and safe applications.

Microwave-Assisted Auto-Combustion Synthesis of Binary/Ternary Co x Ni1-x Ferrite for Electrochemical Hydrogen and Oxygen Evolution

Enormous efforts have been dedicated to engineering low-cost and efficient electrocatalysts for both hydrogen evolution and oxygen evolution reactions (HER and OER, respectively). For this, the current contribution reports the successful synthesis of binary/ternary metal ferrites (Co x Ni1-x Ferrite; x = 0.0, 0.1, 0.3, 0.5, 0.7, and 1.0) by a simple one-step microwave technique and subsequently discusses its chemical and electrochemical properties. The X-ray diffraction analysis substantiated the phase purity of the as-obtained catalysts with various compositions. Additionally, the morphology of the nanoparticles was identified via transmission electron microscopy. Further, the vibrating sample magnetometer justified the ferromagnetic character of the as-prepared products. The electrochemical measurements revealed that the as-prepared materials required the overpotentials of 422-600 and 419-467 mV for HER and OER, respectively, to afford current densities of 10 mA cm-2. In the general sense, Ni cation substitution with Co influenced favorably toward both HER and OER. Among all synthesized electrocatalysts, Co0.9Ni0.1Ferrite displayed the highest performance in terms of OER in 1 M KOH solution, which is related to the synergistic effect of multiple parameters including the optimal substitution amount of Co, the highest Brunauer-Emmett-Teller surface area, the smallest particle size among all samples (26.71 nm), and the lowest charge transfer resistance. The successful synthesis of ternary ferrites carried out for the first time via a microwave-assisted auto-combustion route opens up a new path for their applications in renewable energy technologies.

One-dimensional cobalt oxide nanotubes with rich defect for oxygen evolution reaction

For the electrochemcial hydrogen production, the oxygen evolution reaction (OER) is a pivotal half-reaction in water splitting. However, OER suffers sluggish kinetics and high overpotential, leading to the increase of overall energy consumption and decrease of the energy efficiency. In this work, high-quality cobalt oxide porous nanotubes (Co₃O₄-PNTs) are easily obtained by simple self-template approach. One-dimensional (1D) porous structure provides the large specific surface area, enough abundant active atoms and effective mass transfer. In addition, Co₃O₄-PNTs also own self-stability of 1D architecture, benefitting the their durability for electrocatalytic reaction. Thus, Co₃O₄-PNTs with optimal annealing temperature and time reveal the attractive alkaline OER performance (Tafel slope of 56 mV dec^-1and 323 mV overpotential at 10 mA cm^-2), which outperform the Co₃O₄nanoparticles and benchmark commercial RuO₂nanoparticles. Furthermore, Co₃O₄-PNTs also exhibit excellent OER durability for least 10 h at the 10 mA cm^-2. Overall, Co₃O₄-PNTs with low cost can be serve as a highly reactive and economical catalyst for OER.

Engineered N-doped graphene quantum dots/CoFe2O4 spherical composites as a robust and retrievable catalyst: fabrication, characterization, and catalytic performance investigation in microwave-assisted synthesis of quinoline-3-carbonitrile derivatives

Nitrogen-doped graphene quantum dots (N-GQDs), which are less than 10 nm in size, are an interesting member of the nanocarbon materials family. N-GQDs nanostructures have been broadly applied in various fields, such as drug-gene delivery systems, photocatalytic reactions, and catalysts, owing to their unique properties. However, N-GQDs have rarely been introduced as a catalyst in organic synthesis. Herein, CoFe2O4 nanocomposites with diverse morphologies are fabricated in various conditions (e.g. green routes, various pH adjusters, temperatures). Due to further active sites on the surface of the nanocomposites, morphology engineering can be effective in catalytic activities. Following the synthesis, the catalytic activity of the engineered CoFe2O4 nanocomposites was screened, and it presented the order of spherical > rod > prism > cubic. The uniform spherical morphology provides more accessible active sites. Then, the novel nano-sized N-GQDs/CoFe2O4 magnetic spherical composite was readily fabricated by a green, low-cost, and easy hydrothermal route. The engineered composite was applied as an efficient magnetic nanocatalyst for the MW-assisted one-pot synthesis of new and known quinoline-3-carbonitrile derivatives (83-96%) in the shortest reaction time (60-90 s). Furthermore, the green route, easy separation of the nanocatalyst, and reusability (7 runs) without noticeable loss of catalytic efficiency are other advantages.

Nitrogen doped CuCo2O4 nanoparticles anchored on beaded-like carbon nanofibers as an efficient bifunctional oxygen catalyst toward zinc-air battery

The elaborative design and construction of first-rank bifunctional oxygen electrocatalysts featuring low price, high activity and strong stability is critical for the large-scale applications of rechargeable Zn-air batteries. Here, a resultful strategy is proposed for fabricating nitrogen-doped 1D beaded-like structure carbon nanofibers uniformly decorated with nitrogen-doped CuCo₂O₄ nanoparticles (N-CuCo₂O₄@CNFs) toward boosting oxygen evolution reaction/oxygen reduction reaction (OER/ORR) catalysis. Taking advantage of the synergistic effect between interconnected 1D hierarchical porous carbon nanofiber structure and high catalytic activity of N-doped CuCo₂O₄ nanoparticles derived from bimetallic MOFs, the N-CuCo₂O₄@CNFs catalysts possess enhanced reaction kinetics and preferable charge transfer ability. Impressively, the obtained catalysts exhibit prominent electrocatalytic ability and superior stability for OER/ORR, even surpass the commercial RuO₂ and Pt/C. More significantly, the Zn-air batteries employing the N-CuCo₂O₄@CNFs-800 as cathode display a higher power density of 175.6 mW cm^-2, a lower charge-discharge voltage gap of 0.82 V at 10 mA cm^-2, as well as a better cycling stability with respect to those of Pt/C + RuO₂ mixture, demonstrating the great potential of N-CuCo₂O₄@CNF as a high-efficiency catalyst for clean energy devices.

Recent Progress in the Development of Advanced Functionalized Electrodes for Oxygen Evolution Reaction: An Overview

Presently, the global energy demand for increasing clean and green energy consumption lies in the development of low-cost, sustainable, economically viable and eco-friendly natured electrochemical conversion process, which is a significant advancement in different morphological types of advanced electrocatalysts to promote their electrocatalytic properties. Herein, we overviewed the recent advancements in oxygen evolution reactions (OERs), including easy electrode fabrication and significant action in water-splitting devices. To date, various synthetic approaches and modern characterization techniques have effectively been anticipated for upgraded OER activity. Moreover, the discussed electrode catalysts have emerged as the most hopeful constituents and received massive appreciation in OER with low overpotential and long-term cyclic stability. This review article broadly confers the recent progress research in OER, the general mechanistic approaches, challenges to enhance the catalytic performances and future directions for the scientific community.

Spinel ferrites (MFe2O4): Synthesis, improvement and catalytic application in environment and energy field

To develop efficient catalysts is one of the major ways to solve the energy and environmental problems. Spinel ferrites, with the general chemical formula of MFe₂O₄ (where M = Mg²⁺, Co²⁺, Ni²⁺, Zn²⁺, Fe²⁺, Mn²⁺, etc.), have attracted considerable attention in catalytic research. The flexible position and valence variability of metal cations endow spinel ferrites with diverse physicochemical properties, such as abundant surface active sites, high catalytic activity and easy to be modified. Meanwhile, their unique advantages in regenerating and recycling on account of the magnetic performances facilitate their practical application potential. Herein, the conventional as well as green chemistry synthesis of spinel ferrites is reviewed. Most importantly, the critical pathways to improve the catalytic performance are discussed in detail, mainly covering selective doping, site substitution, structure reversal, defect introduction and coupled composites. Furthermore, the catalytic applications of spinel ferrites and their derivative composites are exclusively reviewed, including Fenton-type catalysis, photocatalysis, electrocatalysis and photoelectro-chemical catalysis. In addition, some vital remarks, including toxicity, recovery and reuse, are also covered. Future applications of spinel ferrites are envisioned focusing on environmental and energy issues, which will be pushed by the development of precise synthesis, skilled modification and advanced characterization along with emerging theoretical calculation.

Binder-Free Air Electrodes for Rechargeable Zinc-Air Batteries: Recent Progress and Future Perspectives

Designing an efficient air electrode is of great significance for the performance of rechargeable zinc (Zn)-air batteries. However, the most widely used approach to fabricate an air electrode involves polymeric binders, which may increase the interface resistance and block electrocatalytic active sites, thus deteriorating the performance of the battery. Therefore, binder-free air electrodes have attracted more and more research interests in recent years. This article provides a comprehensive overview of the latest advancements in designing and fabricating binder-free air electrodes for electrically rechargeable Zn-air batteries. Beginning with the fundamentals of Zn-air batteries and recently reported bifunctional active catalysts, self-supported air electrodes for liquid-state and flexible solid-state Zn-air batteries are then discussed in detail. Finally, the conclusion and the challenges faced for binder-free air electrodes in Zn-air batteries are also highlighted.

Fibrous-Structured Freestanding Electrodes for Oxygen Electrocatalysis

Electrocatalysts used for oxygen reduction and oxygen evolution reactions are critical materials in many renewable-energy devices, such as rechargeable metal-air batteries, regenerative fuel cells, and water-splitting systems. Compared with conventional electrodes made from catalyst powders, oxygen electrodes with a freestanding architecture are highly desirable because of their binder-free fabrication and effective elimination of catalyst agglomeration. Among all freestanding electrode structures that have been investigated so far, fibrous materials exhibit many unique advantages, such as a wide range of available fibers, low material and material-processing costs, large specific surface area, highly porous structure, and simplicity of fiber functionalization. Recent advances in the use of fibrous structures for freestanding electrocatalytic oxygen electrodes are summarized, including electrospun nanofibers, bacterial cellulose, cellulose fibrous structures, carbon clothes/papers, metal nanowires, and metal meshes. After detailed discussion of common techniques for oxygen electrode evaluation, freestanding electrode fabrication, and their electrocatalytic performance, current challenges and future prospects are also presented for future development.

2D Transition Metal Dichalcogenides: Design, Modulation, and Challenges in Electrocatalysis

Hydrogen has been deemed as an ideal substitute fuel to fossil energy because of its renewability and the highest energy density among all chemical fuels. One of the most economical, ecofriendly, and high-performance ways of hydrogen production is electrochemical water splitting. Recently, 2D transition metal dichalcogenides (also known as 2D TMDs) showed their utilization potentiality as cost-effective hydrogen evolution reaction (HER) catalysts in water electrolysis. Herein, recent representative research efforts and systematic progress made in 2D TMDs are reviewed, and future opportunities and challenges are discussed. Furthermore, general methods of synthesizing 2D TMDs materials are introduced in detail and the advantages and disadvantages for some specific methods are provided. This explanation includes several important regulation strategies of creating more active sites, heteroatoms doping, phase engineering, construction of heterostructures, and synergistic modulation which are capable of optimizing the electrical conductivity, exposure to the catalytic active sites, and reaction energy barrier of the electrode material to boost the HER kinetics. In the last section, the current obstacles and future chances for the development of 2D TMDs electrocatalysts are proposed to provide insight into and valuable guidelines for fabricating effective HER electrocatalysts.

Optimized Conductivity and Spin States in N-Doped LaCoO3 for Oxygen Electrocatalysis

The spin state of antibonding orbital (e_g) occupancy in LaCoO₃ is recognized as a descriptor for its oxygen electrocatalysis. However, the Co(III) cation in typical LaCoO₃ (LCO) favors low spin state, which is mediocre for absorbing oxygen-containing groups involved in oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), thus hindering its further development in electrocatalysis. Herein, both experimental and theoretical results reveal the enhancement of bifunctional electrocatalytic activity in LaCoO₃ by N doping. More specifically, electron energy loss spectroscopy and superconducting quantum interference devices magnetic analysis demonstrate that the Co(III) cation in N-doped LaCoO₃ (LCON) achieves a moderate e_g occupancy (≈1) compared with its low spin state in LaCO₃. First-principle calculation results reveal that N dopants play a bifunctional role of tuning the spin-state transition of Co(III) cations and increasing the electrical conductivity of LCO. Thus, the optimized LCON exhibits an OER overpotential of 1.69 V at the current density of 50 mA/cm² (1.94 V for pristine LCO) and yields an ORR limiting current density of 5.78 mA/cm² (4.01 mA/cm² for pristine LCO), which offers a new strategy to simultaneously modulate the magnetic and electronic structures of LCO to further enhance its electrocatalytic activity.

Hollow Porous CoSnOx Nanocubes Encapsulated in One-Dimensional N-Doped Carbon Nanofibers as Anode Material for High-Performance Lithium Storage

CoSnO₃, as a high theoretical capacity electrode material (1235 mAh g^-1) for lithium storage, has been limited due to its low rate performance, huge volume expansion, and an unstable solid electrolyte interface (SEI). A rational design of the material structure including carbon coating can effectively solve the problems. To buffer the volume change and achieve a superior rate capability, hollow CoSnO_x nanocubes encapsulated in 1D N-doped carbon nanofibers (CNFs) were fabricated by electrospinning, showing a final discharge capacity of 733 mAh g^-1 with a 96% capacity retention after 800 cycles at a current rate of 1 A g^-1 and a brilliant rate performance (49% capacity maintenance with the current variation from 0.1 to 5 A g^-1). Absolutely, these outstanding characteristics are ascribed to the unique structure. The N-doped carbon fibers outside not only prevent the volume expansion during Li⁺ intercalation/extraction but also improve the electron transport in the electrode. Most significantly, the hollow structure offers enough vacant space to buffer the internal strain, while the porous structure shortens the Li⁺ diffusion distance. Combined with electrospinning technology, this study shares a novel idea for designing various composites with rational structures and outstanding electrochemical properties.