A functional approach to craniology

An inclusive anatomical network analysis of human craniocerebral topology

The human brain's complex morphology is spatially constrained by numerous intrinsic and extrinsic physical interactions. Spatial constraints help to identify the source of morphological variability and can be investigated by employing anatomical network analysis. Here, a model of human craniocerebral topology is presented, based on the bony elements of the skull at birth and a previously designed model of the brain. The goal was to investigate the topological components fundamental to the craniocerebral geometric balance, to identify underlying phenotypic patterns of spatial arrangement, and to understand how these patterns might have influenced the evolution of human brain morphology. Analysis of the craniocerebral network model revealed that the combined structure of the body and lesser wings of the sphenoid bone, the parahippocampal gyrus, and the parietal and ethmoid bones are susceptible to sustain and apply major spatial constraints that are likely to limit or channel their morphological evolution. The results also showcase a high level of global integration and efficient diffusion of biomechanical forces across the craniocerebral system, a fundamental aspect of morphological variability in terms of plasticity. Finally, community detection in the craniocerebral system highlights the concurrence of a longitudinal and a vertical modular partition. The former reflects the distinct morphogenetic environments of the three endocranial fossae, while the latter corresponds to those of the basicranium and calvaria.

Modularity and community detection in human brain morphology

Humans possess morphologically complex brains, which are spatially constrained by their many intrinsic and extrinsic physical interactions. Anatomical network analysis can be used to study these constraints and their implications. Modularity is a key issue in this framework, namely, the presence of groups of elements that undergo morphological evolution in a concerted way. An array of community detection algorithms was tested on a previously designed anatomical network model of the human brain in order to provide a detailed assessment of modularity in this context. The algorithms that provide the highest quality partitions also reveal general phenotypic patterns underlying the topology of human brain morphology. Taken together, the community detection algorithms highlight the simultaneous presence of a longitudinal and a vertical modular partition of the brain's topology, the combination of which matches the organization of the enveloping braincase. Specifically, the longitudinal organization is in line with the different morphogenetic environments of the three endocranial fossae, while the vertical arrangement corresponds to the distinct developmental processes associated with the cranial base and vault, respectively. The results are robust and have the potential to be compared with equivalent network models of other species. Furthermore, they suggest a degree of concerted topological reciprocity in the spatial organization of brain and skull elements, and posit questions about the extent to which geometrical constraints of the cranial base and the modular partition of the corresponding brain regions may channel both evolutionary and developmental trajectories.

Postnatal growth and spatial conformity of the cranium, brain, eyeballs and masseter muscles in the macaque (Macaca mulatta)

Spatial growth constraints in the head region can lead to coordinated patterns of morphological variation that pleiotropically modify genetically defined phenotypes as the tissues compete for space. Here we test for such architectural modifications during rhesus macaque (Macaca mulatta) postnatal ontogeny. We captured cranium and brain shape from 153 MRI datasets spanning 13 to 1090 postnatal days and tested for patterns of covariation with measurements of relative brain, eyeball, and masseter muscle size as well as callosal tract length. We find that the shape of the infant (<365 days) macaque cranium was most closely aligned to masseter muscle and brain size measured relative to face size. Infant brain and juvenile (365-1090 days) cranium shape were more closely linked with brain size relative to basicranium and face size. Meanwhile, the juvenile macaque brain shape was dominated by the size of the brain relative to that of the basicranium. Associations with relative eyeball size and commissural tract lengths were weaker. Our results are consistent with a spatial-packing regime operating during postnatal macaque ontogeny, in which relative growth of the masseter, face and basicranium have a greater influence than brain growth on the overall shape of the cranium and brain.

Technical evolution of pediatric neurosurgery: craniosynostosis from 1972 to 2023 and beyond

Very few clinical entities have undergone so many different treatment approaches over such a short period of time as craniosynostosis. Surgical treatments for this condition have ranged from simple linear craniectomies, accounting for the specific role of cranial sutures in assuring the normal growth of the skull, to more complex cranial vault reconstructions, based on the perceived role of the skull base in affecting the growth of the skull. While a great deal of evolution has occurred, there remains controversy regarding the ideal treatment including the best surgical technique, the optimal age for surgery, and the long-term morphological and neurodevelopmental outcomes. The evolution of the surgical management of craniosynostosis in the last 50 years has been affected by several factors. This includes the awareness of needing to operate on affected children during infancy to achieve the best results, the use of multistage operations, the availability of more sophisticated surgical tools, and improved perioperative care. In some forms of craniosynostosis, the operations can be carried out at a very young age with low morbidity, and with the postoperative use of a molding helmet, springs, or distractors, these operations prove to be as effective as traditional larger cranial reconstructions performed in older children. As a consequence, complex surgical operations have become progressively less utilized. A second relevant advance was the more recent advent of a molecular diagnosis, which allowed us to understand the pathogenesis of some associated malformations and neurodevelopmental issues that were observed in some children despite appropriate surgical treatment. Future research should focus on improving the analysis of longer-term outcomes and understanding the natural history of craniofacial conditions, including what issues persist despite optimal surgical correction. Progress in molecular investigations concerning the normal and pathological development of cranial sutures could be a further significant step in the management of craniosynostosis, possibly favoring a "medical" treatment in the near future. Artificial intelligence will likely have a role in establishing the diagnosis with less reliance on radiographic studies and in assisting with surgical planning. Overall, much progress has been made, but there remains much to do.

Anterior Skull Base Abnormalities in Congenital Anosmia

INTRODUCTION

The structures of the skull and the brain are related to each other. Prior work in individuals with isolated congenital anosmia (ICA) showed that these individuals were characterized by olfactory bulb (OB) defects. The aim of this study was to compare the morphological pattern of the anterior skull base surrounding the OB between individuals with ICA and normosmic controls. We meant to investigate whether these features can help distinguish abnormalities from normal variation.

METHODS

We conducted a retrospective study to acquire T2-weighted magnetic resonance images from individuals diagnosed with ICA (n = 31) and healthy, normosmic controls matched for age and gender (n = 62). Between both groups, we compared the depth and width of the olfactory fossa, the angle of the ethmoidal fovea, as well as the angle of the lateral lamella of the cribriform plate. Within the ICA group, we further performed subgroup analyses based on the presence or absence of the OB, to investigate whether the morphology of the anterior skull base relates to the presence of OBs. The diagnostic performance of these parameters was evaluated using receiver operating characteristic analysis.

RESULTS

Individuals with ICA exhibited a flattened ethmoid roof and shallower olfactory fossa when compared to controls. Further, the absence of the OB was found to be associated with a higher degree of flattening of the ethmoid roof and a shallow olfactory fossa. We reached the results in the following areas under the receiver operating characteristic curves: 0.80 - angle of fovea ethmoidalis, 0.76 - depth of olfactory fossa, 0.70 - angle of lateral lamella of the cribriform plate for significant differentiation between individuals with ICA and normosmic controls.

CONCLUSION

Individuals with ICA exhibited an unusual anterior skull base surrounding the OB. This study supports the idea of an integrated development of OB and anterior skull base. Hence, the morphological pattern of the anterior skull base surrounding the OB helps distinguish individuals with ICA from normosmic controls and may therefore be useful for the diagnosis of ICA, although it is certainly not an invariable sign of congenital anosmia.

Commensal Microbiota Effects on Craniofacial Skeletal Growth and Morphology

Microbes colonize anatomical sites in health to form commensal microbial communities (e.g., commensal gut microbiota, commensal skin microbiota, commensal oral microbiota). Commensal microbiota has indirect effects on host growth and maturation through interactions with the host immune system. The commensal microbiota was recently introduced as a novel regulator of skeletal growth and morphology at noncraniofacial sites. Further, we and others have shown that commensal gut microbes, such as segmented filamentous bacteria (SFB), contribute to noncraniofacial skeletal growth and maturation. However, commensal microbiota effects on craniofacial skeletal growth and morphology are unclear. To determine the commensal microbiota's role in craniofacial skeletal growth and morphology, we performed craniometric and bone mineral density analyses on skulls from 9-week-old female C57BL/6T germ-free (GF) mice (no microbes), excluded-flora (EF) specific-pathogen-free mice (commensal microbiota), and murine-pathogen-free (MPF) specific-pathogen-free mice (commensal microbiota with SFB). Investigations comparing EF and GF mice revealed that commensal microbiota impacted the size and shape of the craniofacial skeleton. EF versus GF mice exhibited an elongated gross skull length. Cranial bone length analyses normalized to skull length showed that EF versus GF mice had enhanced frontal bone length and reduced cranial base length. The shortened cranial base in EF mice was attributed to decreased presphenoid, basisphenoid, and basioccipital bone lengths. Investigations comparing MPF mice and EF mice demonstrated that commensal gut microbes played a role in craniofacial skeletal morphology. Cranial bone length analyses normalized to skull length showed that MPF versus EF mice had reduced frontal bone length and increased cranial base length. The elongated cranial base in MPF mice was due to enhanced presphenoid bone length. This work, which introduces the commensal microbiota as a contributor to craniofacial skeletal growth, underscores that noninvasive interventions in the gut microbiome could potentially be employed to modify craniofacial skeletal morphology. © 2023 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Developmental origin underlies evolutionary rate variation across the placental skull

The placental skull has evolved into myriad forms, from longirostrine whales to globular primates, and with a diverse array of appendages from antlers to tusks. This disparity has recently been studied from the perspective of the whole skull, but the skull is composed of numerous elements that have distinct developmental origins and varied functions. Here, we assess the evolution of the skull's major skeletal elements, decomposed into 17 individual regions. Using a high-dimensional morphometric approach for a dataset of 322 living and extinct eutherians (placental mammals and their stem relatives), we quantify patterns of variation and estimate phylogenetic, allometric and ecological signal across the skull. We further compare rates of evolution across ecological categories and ordinal-level clades and reconstruct rates of evolution along lineages and through time to assess whether developmental origin or function discriminate the evolutionary trajectories of individual cranial elements. Our results demonstrate distinct macroevolutionary patterns across cranial elements that reflect the ecological adaptations of major clades. Elements derived from neural crest show the fastest rates of evolution, but ecological signal is equally pronounced in bones derived from neural crest and paraxial mesoderm, suggesting that developmental origin may influence evolutionary tempo, but not capacity for specialisation. This article is part of the theme issue 'The mammalian skull: development, structure and function'.

Normal human craniofacial growth and development from 0 to 4 years

Knowledge of human craniofacial growth (increase in size) and development (change in shape) is important in the clinical treatment of a range of conditions that affects it. This study uses an extensive collection of clinical CT scans to investigate craniofacial growth and development over the first 48 months of life, detail how the cranium changes in form (size and shape) in each sex and how these changes are associated with the growth and development of various soft tissues such as the brain, eyes and tongue and the expansion of the nasal cavity. This is achieved through multivariate analyses of cranial form based on 3D landmarks and semi-landmarks and by analyses of linear dimensions, and cranial volumes. The results highlight accelerations and decelerations in cranial form changes throughout early childhood. They show that from 0 to 12 months, the cranium undergoes greater changes in form than from 12 to 48 months. However, in terms of the development of overall cranial shape, there is no significant sexual dimorphism in the age range considered in this study. In consequence a single model of human craniofacial growth and development is presented for future studies to examine the physio-mechanical interactions of the craniofacial growth.

Hominin fossils from Kromdraai and Drimolen inform Paranthropus robustus craniofacial ontogeny

Ontogeny provides critical information about the evolutionary history of early hominin adult morphology. We describe fossils from the southern African sites of Kromdraai and Drimolen that provide insights into early craniofacial development in the Pleistocene robust australopith Paranthropus robustus. We show that while most distinctive robust craniofacial features appear relatively late in ontogeny, a few do not. We also find unexpected evidence of independence in the growth of the premaxillary and maxillary regions. Differential growth results in a proportionately larger and more postero-inferiorly rotated cerebral fossa in P. robustus infants than in the developmentally older Australopithecus africanus juvenile from Taung. The accumulated evidence from these fossils suggests that the iconic SK 54 juvenile calvaria is more likely early Homo than Paranthropus. It is also consistent with the hypothesis that P. robustus is more closely related to Homo than to A. africanus.

Assessment of the Relationship between the Total Occlusal Area of the Human Permanent Upper First and Second Molars and the Robusticity of the Facial Skeleton in Sex-Different Cranial Samples of Homo Sapiens: A Preliminary Study

The aim of this study was to establish whether there is a significant relationship between the total occlusal area (TOCA) of two types of permanent upper molars (first-M¹ and second-M²) and facial robusticity, as well as which of the examined facial regions indicate a relationship concerning the grade of their massiveness with the TOCA of analyzed molars in different sex adult Homo sapiens cranial samples. To obtain the values of the TOCA of the molars (n = 145), a morphometric method was performed based on the calibrated digital images of their occlusal surface using ImageJ software. The grades of the massiveness of six facial regions were assessed using qualitative scales of their expression, and an index of general facial robusticity was calculated. Two types of analyses were performed concerning standardized and non-standardized traits to the facial size, including Spearman's/or Pearson's correlations and partial rank correlations. The obtained results indicated the presence of a positive relationship between the relative TOCA of M²s and the relative general facial robusticity, as well as between the TOCA of both types of molars and the massiveness of trigone region of the facial skeleton in male crania. However, most of the obtained results were not consistent with the assumptions of the "localized masticatory stress hypothesis".

Maxillary lateral incisor agenesis is associated with maxillary form: a geometric morphometric analysis

BACKGROUND AND OBJECTIVE

Agenesis of the maxillary lateral incisor occurs in up to 4% of all individuals and requires multidisciplinary treatment. Its developmental origins, however, are not fully understood. Earlier studies documented genetic factors contributing to agenesis but also an association with craniofacial morphology. In this study, we assessed the association between maxillary morphology and lateral incisor agenesis by a geometric morphometric approach to disentangle the roles of developmental plasticity and genetic factors.

MATERIALS AND METHODS

We quantified the maxillary alveolar ridge by 19 two-dimensional landmarks on cross-sectional images of 101 computed tomography scans. We compared the shape and size of the alveolar ridge across patients with unilateral or bilateral agenesis of maxillary lateral incisors and patients with extracted or in situ incisors.

RESULTS

The maxillary alveolar ridge was clearly narrower in patients with agenesis or an extracted incisor compared to the control group, whereas the contralateral side of the unilateral agenesis had an intermediate width. Despite massive individual variation, the ventral curvature of the alveolar ridge was, on average, more pronounced in the bilateral agenesis group compared to unilateral agenesis and tooth extraction.

CONCLUSIONS

This suggests that pleiotropic genetic and epigenetic factors influence both tooth development and cranial growth, but an inappropriately sized or shaped alveolar process may also inhibit normal formation or development of the tooth bud, thus leading to dental agenesis.

CLINICAL RELEVANCE

Our results indicate that bilateral agenesis of the lateral incisor tends to be associated with a higher need of bone augmentation prior to implant placement than unilateral agenesis.

Sexual dimorphism in human midfacial growth patterns from newborn to 5 years old based on computed tomography

Recent studies have supported the presence and varying nature of craniofacial sexual dimorphism (SD) from the very first stages of ontogeny. But the exact patterns of between-sex differences during the first years of life remain obscure despite the importance of these data for craniofacial surgery treatment and forensic studies. Our study employs a large dataset of clinical computed tomography scans of individuals of East Slavonic descent from birth to 5 years of age (247 males and 184 females) to address the pattern of age-related between-sex differences in 22 linear measurements of the mid-face. At birth, SD of most dimensions is low, but it increases significantly during the first year of life. The level of SD of most variables fluctuates in both directions during the second year and peaks during the third and fourth years of life. During the sixth year, SD of about half of the variables markedly decreases. In adults, SD of all variables increases, but to a very different extent: from 2% to 13%. Most sexually dimorphic features of the facial skeleton begin to develop early in postnatal ontogeny and then may or may not become accentuated during puberty. Importantly, the patterns of age changes in the level of SD differ strongly between various dimensions, and so cannot be expressed by a single value for the whole face. Additionally, the level of SD for a particular variable is not ontogenetically stable during the first years of life.

A comprehensive anatomical network analysis of human brain topology

A network approach to the macroscopic anatomy of the human brain can be used to model physical interactions among regions in order to study their topological properties, as well as the topological properties of the overall system. Here, a comprehensive model of human brain topology is presented, based on traditional macroanatomical divisions of the whole brain, which includes its subcortical regions. The aim was to localise anatomical elements that are essential for the geometric balance of the brain, as to identify underlying phenotypic patterns of spatial arrangement and understand how these patterns may influence brain morphology in ontogeny and phylogeny. The model revealed that the parahippocampal gyrus, the anterior lobe of the cerebellum and the ventral portion of the midbrain are subjected to major topological constraints that are likely to limit or channel their morphological evolution. The present model suggests that the brain can be divided into a superior and an inferior morphological block, linked with extrinsic topological constraints imposed by the surrounding braincase. This information should be considered duly both in ontogenetic and phylogenetic studies of primate neuroanatomy.

Craniovascular variation in four late Holocene human samples from southern South America

Craniovascular traits in the endocranium (traces of middle meningeal vessels and dural venous sinuses, emissary foramina) provide evidence of vascular anatomy in osteological samples. We investigate the craniovascular variation in four South American samples and the effect of artificial cranial modifications (ACM). CT scans of human adult crania from four archeological samples from southern South America (including skulls with ACM) are used for the analyses. The craniovascular features in the four samples are described, skulls with and without ACM are compared, and additionally, South Americans are compared to a previously analyzed sample of Europeans. Of the four South American samples, the Southern Patagonian differs the most, showing the most distinct cranial dimensions, no ACM, and larger diameters of the emissary foramina. Unlike previous studies, we did not find any major differences in craniovascular features between modified and non-modified skulls, except that the skulls with ACM present somewhat smaller foramina. South Americans significantly differed from Europeans, especially in the anteroposterior dominance of the middle meningeal artery, in the pattern of sinus confluence, in the occurrence of enlarged occipito-marginal sinuses, and in foramina frequencies and diameters. Craniovascular morphology is not affected by the cranial size, even in skulls with ACM, indicating a minor or null influence of structural topological factors. Concerning the samples from distinct geographic and climatic environments, it must be evaluated whether the craniovascular morphogenesis might be partially influenced by specific functions possibly associated with thermoregulation, intracranial pressure, and the maintenance of intracranial homeostasis.

The brain of Homo habilis: Three decades of paleoneurology

In 1987, Phillip Tobias published a comprehensive anatomical analysis of the endocasts attributed to Homo habilis, discussing issues dealing with brain size, sulcal patterns, and vascular traces. He suggested that the neuroanatomy of this species evidenced a clear change toward many cerebral traits associated with our genus, mostly when concerning the morphology of the frontal and parietal cortex. After more than 30 years, the fossil record associated with this taxon has not grown that much, but we have much more information on cranial and brain biology, and we are using a larger array of digital methods to investigate the paleoneurological variation observed in the human genus. Brain volume, the size of the frontal lobe, or the gross hemispheric asymmetries are still relevant issues, but they are considered to be less central than before. More attention is instead being paid to the cortical organization, the relationships with the cranial architecture, and the influence of molecular or ecological factors. Although the field of paleoneurology can currently count on a larger range of tools and principles, there is still a general lack of anatomical information on many endocranial traits. This aspect is probably crucial for the agenda of paleoneurology. More importantly, the whole science is undergoing a delicate change, because of the growing influence of the social environment. In this sense, the disciplines working with fossils (and, in particular, with brain evolution) should take particular care to maintain a healthy professional situation, avoiding an excess of speculation and overstatement.

Flexible conservatism in the skull modularity of convergently evolved myrmecophagous placental mammals

Background

The skull of placental mammals constitutes one of the best studied systems for phenotypic modularity. Several studies have found strong evidence for the conserved presence of two- and six-module architectures, while the strength of trait correlations (integration) has been associated with major developmental processes such as somatic growth, muscle-bone interactions, and tooth eruption. Among placentals, ant- and termite-eating (myrmecophagy) represents an exemplar case of dietary convergence, accompanied by the selection of several cranial morphofunctional traits such as rostrum elongation, tooth loss, and mastication loss. Despite such drastic functional modifications, the covariance patterns of the skull of convergently evolved myrmecophagous placentals are yet to be studied in order to assess the potential consequences of this dietary shift on cranial modularity.

Results

Here, we performed a landmark-based morphometric analysis of cranial covariance patterns in 13 species of myrmecophagous placentals. Our analyses reveal that most myrmecophagous species present skulls divided into six to seven modules (depending on the confirmatory method used), with architectures similar to those of non-myrmecophagous placentals (therian six modules). Within-module integration is also similar to what was previously described for other placentals, suggesting that most covariance-generating processes are conserved across the clade. Nevertheless, we show that extreme rostrum elongation and tooth loss in myrmecophagid anteaters have resulted in a shift in intermodule correlations in the proximal region of the rostrum. Namely, the naso-frontal and maxillo-palatine regions are strongly correlated with the oro-nasal module, suggesting an integrated rostrum conserved from pre-natal developmental processes. In contrast, the similarly toothless pangolins show a weaker correlation between the anterior rostral modules, resembling the pattern of toothed placentals.

Conclusions

These results reveal that despite some integration shifts related to extreme functional and morphological features of myrmecophagous skulls, cranial modular architectures have conserved the typical mammalian scheme.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12862-022-02030-9.

Genetic influences on dentognathic morphology in the Jirel population of Nepal

Patterns of genetic variation and covariation impact the evolution of the craniofacial complex and contribute to clinically significant malocclusions in modern human populations. Previous quantitative genetic studies have estimated the heritabilities and genetic correlations of skeletal and dental traits in humans and nonhuman primates, but none have estimated these quantitative genetic parameters across the dentognathic complex. A large and powerful pedigree from the Jirel population of Nepal was leveraged to estimate heritabilities and genetic correlations in 62 maxillary and mandibular arch dimensions, incisor and canine lengths, and post-canine tooth crown areas (N ≥ 739). Quantitative genetic parameter estimation was performed using maximum likelihood-based variance decomposition. Residual heritability estimates were significant for all traits, ranging from 0.269 to 0.898. Genetic correlations were positive for all trait pairs. Principal components analyses of the phenotypic and genetic correlation matrices indicate an overall size effect across all measurements on the first principal component. Additional principal components demonstrate positive relationships between post-canine tooth crown areas and arch lengths and negative relationships between post-canine tooth crown areas and arch widths, and between arch lengths and arch widths. Based on these findings, morphological variation in the human dentognathic complex may be constrained by genetic relationships between dental dimensions and arch lengths, with weaker genetic correlations between these traits and arch widths allowing for variation in arch shape. The patterns identified are expected to have impacted the evolution of the dentognathic complex and its genetic architecture as well as the prevalence of dental crowding in modern human populations.

Sulci 3D mapping from human cranial endocasts: A powerful tool to study hominin brain evolution

Key questions in paleoneurology concern the timing and emergence of derived cerebral features within the human lineage. Endocasts are replicas of the internal table of the bony braincase that are widely used in paleoneurology as a proxy for reconstructing a timeline for hominin brain evolution in the fossil record. The accurate identification of cerebral sulci imprints in endocasts is critical for assessing the topographic extension and structural organisation of cortical regions in fossil hominins. High‐resolution imaging techniques combined with established methods based on population‐specific brain atlases offer new opportunities for tracking detailed endocranial characteristics. This study provides the first documentation of sulcal pattern imprints from the superolateral surface of the cerebrum using a population‐based atlas technique on extant human endocasts. Human crania from the Pretoria Bone Collection (South Africa) were scanned using micro‐CT. Endocasts were virtually extracted, and sulci were automatically detected and manually labelled. A density map method was applied to project all the labels onto an averaged endocast to visualise the mean distribution of each identified sulcal imprint. This method allowed for the visualisation of inter‐individual variation of sulcal imprints, for example, frontal lobe sulci, correlating with previous brain‐MRI studies and for the first time the extensive overlapping of imprints in historically debated areas of the endocast (e.g. occipital lobe). In providing an innovative, non‐invasive, observer‐independent method to investigate human endocranial structural organisation, our analytical protocol introduces a promising perspective for future research in paleoneurology and for discussing critical hypotheses on the evolution of cognitive abilities among hominins.

Influence of genotype and perioral musculature on maxillary and mandibular development

OBJECTIVES

To determine whether there is an association between skeletal jaw position and perioral musculature, and if genotypes can predict skeletal growth.

MATERIALS AND METHODS

A prospective study on 42 patients over 1 year was performed. The study included 22 females and 20 males with and average age of 28.5 years. Lip strength was compared to radiographic cephalometric measurements. Allelic and genotypic frequencies from polymorphisms rs678397 and rs1815739 in ACTN3 and rs10850110 in MYO1H were compared to each variable. Chi-square and Fisher exact tests were used to determine if differences were statistically significant (alpha = 0.05).

RESULTS

The data showed significant differences between rs678397 genotype and allele frequencies and SNA angle (P = .01; P = .003, respectively); between rs1815739 allele frequency and SNA angle (P = .01); between rs678397 allele frequency and ANB angle (P = .049); between rs678397 genotype and allele frequencies and lip strength in females (P = .045; P = .02); and between rs678397 allele frequency and overall lip strength (P = .049), after mean strength values used as cut off being customized by sex.

CONCLUSIONS

Polymorphisms in ACTN3 are associated with weak lips and larger SNA and ANB angles.

A network approach to the topological organization of the Brodmann map

Brain morphology is the result of functional factors associated with cortical areas, but it is also influenced by structural aspects due to physical and spatial constraints. Despite the noticeable advances in brain mapping, Brodmann's map is still used in many research fields that rely on macroscopic cortical features for practical or theoretical issues. Here, the topological relationships among the Brodmann areas were modelled according to the principles of network analysis, in order to provide a synthetic view of their spatial properties following a criterion of contiguity. The model evidences the importance of the parieto-temporal region in terms of biological burden and topological complexity. The retrosplenial region is particularly influenced by spatial constraints, and the cingulate cortex occupies a position that bridges the anterior and posterior topological blocks. Such spatial framework should be taken into account when dealing with brain morphology in both ontogeny and phylogeny. This article is protected by copyright. All rights reserved.

The genetic basis of neurocranial size and shape across varied lab mouse populations

Brain and skull tissues interact through molecular signalling and mechanical forces during head development, leading to a strong correlation between the neurocranium and the external brain surface. Therefore, when brain tissue is unavailable, neurocranial endocasts are often used to approximate brain size and shape. Evolutionary changes in brain morphology may have resulted in secondary changes to neurocranial morphology, but the developmental and genetic processes underlying this relationship are not well understood. Using automated phenotyping methods, we quantified the genetic basis of endocast variation across large genetically varied populations of laboratory mice in two ways: (1) to determine the contributions of various genetic factors to neurocranial form and (2) to help clarify whether a neurocranial variation is based on genetic variation that primarily impacts bone development or on genetic variation that primarily impacts brain development, leading to secondary changes in bone morphology. Our results indicate that endocast size is highly heritable and is primarily determined by additive genetic factors. In addition, a non-additive inbreeding effect led to founder strains with lower neurocranial size, but relatively large brains compared to skull size; suggesting stronger canalization of brain size and/or a general allometric effect. Within an outbred sample of mice, we identified a locus on mouse chromosome 1 that is significantly associated with variation in several positively correlated endocast size measures. Because the protein-coding genes at this locus have been previously associated with brain development and not with bone development, we propose that genetic variation at this locus leads primarily to variation in brain volume that secondarily leads to changes in neurocranial globularity. We identify a strain-specific missense mutation within Akt3 that is a strong causal candidate for this genetic effect. Whilst it is not appropriate to generalize our hypothesis for this single locus to all other loci that also contribute to the complex trait of neurocranial skull morphology, our results further reveal the genetic basis of neurocranial variation and highlight the importance of the mechanical influence of brain growth in determining skull morphology.

Shape analysis of the StW 578 calotte from Jacovec Cavern, Gauteng (South Africa)

The fossiliferous deposits within the lower-lying Jacovec Cavern in the locality of Sterkfontein yielded valuable hominin remains, including the StW 578 specimen. Because StW 578 mainly preserves the calotte, the taxonomic status of this specimen has been a matter of discussion. Within this context, here we employed high-resolution microtomography and a landmark-free registration method to explore taxonomically diagnostic features in the external surface of the StW 578 calotte. Our comparative sample included adult humans and common chimpanzees as well as one Australopithecus africanus specimen (Sts 5). We partially restored the StW 578 calotte digitally and compared it to extant specimens and Sts 5 using a landmark-free registration based on smooth and invertible surface deformation. Our comparative shape analysis reveals morphological differences with extant humans, especially in the frontal bones, and with extant chimpanzees, as well as intriguing specificities in the morphology of the StW 578 parietal bones. Lastly, our study suggests morphological proximity between StW 578 and Sts 5. Given the intimate relationship between the brain and the braincase, as well as the integration of the hominin face and neurocranium, we suggest that cranial vault shape differences between StW 578 and extant humans, if confirmed by further analyses, could be either explained by differences in brain surface morphology or in the face. Besides providing additional information about the morphology of the Jacovec calotte that will be useful in future taxonomic discussion, this study introduces a new protocol for the landmark-free analysis of fossil hominin cranial shape.

Cranial-Vertebral-Maxillary Morphological Integration in Down Syndrome

Background: Morphological integration refers to the tendency of anatomical structures to show correlated variations because they develop in response to shared developmental processes or function in concert with other structures. The objective of this study was to determine the relationships between the dimensions of different cranial-cervical-facial structures in patients with Down syndrome (DS). Methodology: The study group consisted of 41 individuals with DS who had undergone cone-beam computed tomography (CBCT) at the Dental Radiology Unit of the University of Santiago de Compostela (Spain). In the historical archive of this same unit, 41 CBCTs belonging to individuals with no known systemic disorders or severe malformations of the maxillofacial region were selected, forming an age and sex-matched control group. Twenty-nine measurements were performed on each participant’s CBCT images, which were grouped into three blocks: atlantoaxial dimensions, craniovertebral dimensions and cephalometric dimensions. To determine whether there were significant differences between the dimensions obtained in the DS and control groups, we applied multiple analysis of variance and linear discriminant analysis tests. The analysis of the association between blocks (in pairs) was performed with the canonical correlation analysis test. Results: The dimensions evaluated in the three blocks of variables of individuals with DS differ significantly from those of nonsyndromic controls (p < 0.001). The highest discriminative capacity to identify controls and patients with DS was obtained with the cephalometric dimensions (87.5%). With regard to the association between blocks (two-by-two measurements), we found no significant relationship in the DS group. However, we confirmed a statistically significant correlation between all pairs of blocks of variables in the controls, especially between the atlantoaxial and cephalometric dimensions (p < 0.001) and between the craniovertebral and cephalometric dimensions (p < 0.001). Conclusions: Our results confirm a very poor morphological integration of the cranial-cervical-maxillary complex in individuals with DS. This finding reinforces the proposal that gene overload enhances the channeling process.

Morphological correspondence between brain and endocranial surfaces in mice exposed to undernutrition during development

The morphological changes of the brain and the skull are highly integrated as a result of shared developmental pathways and different types of interactions between them. Shared developmental trajectories between these two structures might be influenced by genetic and environmental factors. Although the effect of environmental factors on neural and craniofacial traits has been extensively studied, less is known about the specific impact of stressful conditions on the coordinated variation between these structures. Here, we test the effect of early nutrient restriction on morphological correspondence between the brain and the endocast. For this purpose, mice exposed to protein or calorie-protein restriction during gestation and lactation were compared with a control group in which dams were fed standard food ad libitum. High-resolution images were obtained after weaning to describe brain and endocranial morphology. By magnetic resonance imaging (MRI), brain volumes were obtained and endocasts were segmented from skull reconstructions derived from micro-computed tomography (microCT). Brain and endocranial volumes were compared to assess the correspondence in size. Shape changes were analyzed using a set of landmarks and semilandmarks on 3D surfaces. Results indicated that brain volume is relatively less affected by undernutrition during development than endocast volume. Shape covariation between the brain and the endocast was found to be quite singular for protein-restricted animals. Procrustes distances were larger between the brain and the endocast of the same specimens than between brains or endocasts of different animals, which means that the greatest similarity is by type of structure and suggests that the use of the endocast as a direct proxy of the brain at this intraspecific scale could have some limitations. In the same line, patterns of brain shape asymmetry were not directly estimated from endocranial surfaces. In sum, our findings indicate that morphological variation and association between the brain and the endocast is modulated by environmental factors and support the idea that head morphogenesis results from complex processes that are sensitive to the pervasive influence of nutrient intake.

Craniofacial orientation and parietal bone morphology in adult modern humans

In adult humans, the orbits vary mostly in their orientation in relation to the frontal bone profile, while the orientation of the cranial base and face are associated with the anteroposterior dimensions of the parietal bone. Here we investigate the effect of parietal bone length on the orientation of the orbits, addressing craniofacial integration and head orientation. We applied shape analysis to a sample of computed tomography scans from 30 adult modern humans, capturing the outlines of the parietal and frontal bones, the orbits, and the lateral and midline cranial base, to investigate shape variation, covariation, and modularity. Results show that the orientation of the orbits varies in accordance with the anterior cranial base, and in association with changes in parietal bone longitudinal extension. Flatter, elongated parietal bones are associated with downwardly oriented orbits and cranial bases. Modularity analysis points to a significant integration among the orbits, anterior cranial base, and the frontal profile. While the orbits are morphologically integrated with the adjacent structures in terms of shape, the association with parietal bone size depends on the spatial relationship between the two blocks. Complementary changes in orbit and parietal bone might play a role in accommodating craniofacial variability and may contribute to maintain the functional axis of the head. To better understand how skull morphology and head posture relate, future studies should account for the spatial relationship between the head and the neck.

Geometric morphometric variability in the supraorbital and orbital region of Middle Pleistocene hominins: Implications for the taxonomy and evolution of later Homo

This study assessed variation in the supraorbital and orbital region of the Middle Pleistocene hominins (MPHs), sometimes called Homo heidelbergensis s.l., to test whether it matched the expectations of intraspecific variation. The morphological distinctiveness and relative variation of this region, which is relatively well represented in the hominin fossil record, was analyzed quantitatively in a comparative taxonomic framework. Coordinates of 230 3D landmarks (20) and sliding semilandmarks (210) were collected from 704 specimens from species of Homo, Australopithecus, Paranthropus, Gorilla, Pan, Papio, and Macaca. Results showed that the MPHs had expected levels of morphological distinctiveness and intragroup and intergroup variation in supraorbital and orbital morphology, relative to commonly recognized non-hominin catarrhine species. However, the Procrustes distances between this group and H. sapiens were significantly higher than expected for two closely related catarrhine species. Furthermore, this study showed that variation within the MPH could be similarly well contained within existing hypodigms of H. sapiens, H. neanderthalensis, and H. erectus s.l. Although quantitative assessment of supraorbital and orbital morphology did not allow differentiation between taxonomic hypotheses in later Homo, it could be used to test individual taxonomic affiliation and identify potentially anomalous individuals. This study confirmed a complicated pattern of supraorbital and orbital morphology in the MPH fossil record and raises further questions over our understanding of the speciation of H. sapiens and H. neanderthalensis and taxonomic diversity in later Homo.

Cranial Anatomical Integration and Disparity Among Bones Discriminate Between Primates and Non-primate Mammals

The primate skull hosts a unique combination of anatomical features among mammals, such as a short face, wide orbits, and big braincase. Together with a trend to fuse bones in late development, these features define the anatomical organization of the skull of primates—which bones articulate to each other and the pattern this creates. Here, I quantified the anatomical organization of the skull of 17 primates and 15 non-primate mammals using anatomical network analysis to assess how the skulls of primates have diverged from those of other mammals, and whether their anatomical differences coevolved with brain size. Results show that primates have a greater anatomical integration of their skulls and a greater disparity among bones than other non-primate mammals. Brain size seems to contribute in part to this difference, but its true effect could not be conclusively proven. This supports the hypothesis that primates have a distinct anatomical organization of the skull, but whether this is related to their larger brains remains an open question.

Craniovascular traits and braincase morphology in craniosynostotic human skulls

Middle meningeal vessels, dural venous sinuses, and emissary veins leave imprints and canals in the endocranium, and thus provide evidence of vascular patterns in osteological samples. This paper investigates whether craniovascular morphology undergoes changes in craniosynostotic human skulls, and if specific alterations may reflect structural and functional relationships in the cranium. The analyzed osteological sample consists of adult individuals with craniosynostoses generally associated with dolichocephalic or brachycephalic proportions, and a control sample of anatomically normal adult skulls. The pattern and dominance of the middle meningeal artery, the morphology of the confluence of the sinuses, and the size and number of the emissary foramina were evaluated. Craniovascular morphology was more diverse in craniosynostotic skulls than in anatomically normal skulls. The craniosynostotic skulls often displayed enlarged occipito-marginal sinuses and more numerous emissary foramina. The craniosynostotic skulls associated with more brachycephalic morphology often presented enlarged emissary foramina, while the craniosynostotic skulls associated with dolichocephalic effects frequently displayed more developed posterior branches of the middle meningeal artery. The course and morphology of the middle meningeal vessels, dural venous sinuses, and emissary veins in craniosynostotic skulls can be related to the redistribution of growth forces, higher intracranial pressure, venous hypertension, or thermal constraints. These functional and structural changes are of interest in both anthropology and medicine, involving epigenetic traits that concern the functional and ontogenetic balance between soft and hard tissues.

Macroevolutionary ecomorphology of the Carnivora skull: adaptations and constraints in the extant species

The mammalian order Carnivora is characterized by a broad taxonomic and ecological diversity. By using a large sample of extant species, we tested the impact of ecological factors on carnivoran skull (cranium and mandible) morphology, taking advantage of a combined geometric morphometrics and comparative method approach. We implemented several evolutionary models to account for different tempo and mode of evolution in size and shape data. These models validated the association between skull morphology and diet at the interspecific scale. The functional distinction between pinniped (aquatic) and fissiped (mostly terrestrial) taxa was found valid only in mandible shape and cranial size. High levels of morphological disparity and evolutionary rates were identified in specialized dietary groups, and positive association between rates and disparity was found for skull size. Cranium and mandible showed consistent patterns of covariation that reflect constrained functional processes, which stabilize the ecomorphological evolution of Carnivora. Aquatic adaptations allowed carnivorans to invade and persist within novel regions of the mandibular morphospace. This ecological shift did not increase morphological disparity but occurred at a faster rate than in terrestrial species. Those species exhibit a stronger level of cranio-mandibular covariation due to constraints imposed by more demanding masticatory adaptations.

Integration between the cranial boundaries of the nasopharynx and the upper cervical vertebrae in Homo and Pan

The nasopharynx is an important anatomical structure involved in respiration. Its bony boundaries, including the basicranium and upper cervical vertebrae, may be subject to selective pressures and constraints related to respiratory function. Here, we investigate phenotypic integration, or covariation, between the face, the basicranial boundaries of the nasopharynx, and the atlas and axis to understand constraints affecting these structures. We collected three-dimensional coordinate data from a sample of 80 humans and 44 chimpanzees, and used two-block partial least squares to assess RV (a multivariate generalization of Pearson's r² ), r_PLS , the covariance ratio, and effect size for integration among structures. We find that integration is significant among some of these structures, and that integration between the basicranial nasopharynx and vertebrae and between the face and vertebrae is likely independent. We also find divergences in the pattern of integration between humans and chimpanzees suggesting greater constraints among the human face and nasopharynx, which we suggest are linked to divergent developmental trajectories in the two taxa. Evolutionary changes in human basicranial anatomy, coupled with human-like developmental trajectories, may have required that the face grow to compensate any variation in nasopharyngeal structure. However, we were unable to determine whether the nasopharynx or the face is more strongly integrated with the vertebrae, and therefore whether respiration or biomechanical considerations related to positional behavior may be more strongly tied to vertebral evolution. Future work should focus on greater sample sizes, soft tissue structures, and more diverse taxa to further clarify these findings.

The role of the nasal region in craniofacial growth: An investigation using path analysis

This study focuses on the role of the nasal region and its interactions with adjacent facial elements during early ontogeny. A series of linear measurements, areas and volumes were extracted from a collection of 227 medical CT-scans of children from 0 to 6 years of age. These measurements describe aspects of the form of the orbit, maxilla, peri-alveolar (subnasal) region, nasal area, eye, oral region, masseter, and temporal muscles. Hypothesized interactions were then examined using path analysis. Two paths were designed: the first to investigate potential interactions in, and relative contributions of the nasal derivatives and adjacent regions to overall facial growth and development; the second path sees the addition of facial soft tissue measurements and aims to assess their effects on skeletal components, and on overall facial growth and development. The results of the first path indicate a large contribution of the nasal and subnasal regions to facial development. This indicates that the nasal septum and the developing dentition provide an important but variable contribution to facial ontogeny during early years. This result is confirmed in the second path, where the soft tissue elements were added to the diagram. Results of the second path indicate that the soft tissues contribute only locally to the development of some skeletal elements of the face. This indicates that the contribution of skeletal components has a more direct effect on facial height than soft tissue matrices, however there are complex interactions between soft tissues and skeletal elements throughout ontogeny.

Quantifying maxillary development in chimpanzees and humans: An analysis of prognathism and orthognathism at the morphological and microscopic scales

Facial orientation (projection and degree of prognathism) and form in hominins is highly variable, likely related to evolutionary modifications of the microscopic process of bone modeling (the simultaneous cellular activities of bone formation and resorption) during ontogeny. However, in anteriorly projected faces such as those of early hominins, little is known about the link between bone modeling and facial developmental patterns. Similarly, these aspects have been infrequently investigated in extant great apes. In this study, quantitative methods were applied to a cross-sectional ontogenetic sample of 33 chimpanzees (Pan troglodytes verus) and 59 modern humans (Homo sapiens) to compare the development of maxillary prognathism to orthognathism at both microscopic and macroscopic (or morphological) scales using surface histology and geometric morphometric techniques. Chimpanzees express on average lower amounts of bone resorption than humans on the maxillary periosteum throughout ontogeny; however, the premaxilla is consistently resorbed from early stages on. The presence of bone resorption in the chimpanzee premaxilla, such as that seen in some early hominins, suggests a more ape-like pattern of maxillary bone modeling in these specimens. However, this shows that similarities in bone modeling patterns can lead to variations in shape, suggesting that other aspects of facial growth (such as modifications of rates and timings of development, as well as sutural growth) also played a crucial role in facial evolution.

Ontogenetic and in silico models of spatial-packing in the hypermuscular mouse skull

Networks linking single genes to multiple phenotypic outcomes can be founded on local anatomical interactions as well as on systemic factors like biochemical products. Here we explore the effects of such interactions by investigating the competing spatial demands of brain and masticatory muscle growth within the hypermuscular myostatin-deficient mouse model and in computational simulations. Mice that lacked both copies of the myostatin gene (-/-) and display gross hypermuscularity, and control mice that had both copies of the myostatin gene (+/+) were sampled at 1, 7, 14 and 28 postnatal days. A total of 48 mice were imaged with standard as well as contrast-enhanced microCT. Size metrics and landmark configurations were collected from the image data and were analysed alongside in silico models of tissue expansion. Findings revealed that: masseter muscle volume was smaller in -/- mice at day 1 but became, and remained thereafter, larger by 7 days; -/- endocranial volumes begin and remained smaller; -/- enlargement of the masticatory muscles was associated with caudolateral displacement of the calvarium, lateral displacement of the zygomatic arches, and slight dorsal deflection of the face and basicranium. Simulations revealed basicranial retroflexion (flattening) and dorsal deflection of the face associated with muscle expansion and abrogative covariations of basicranial flexion and ventral facial deflection associated with endocranial expansion. Our findings support the spatial-packing theory and highlight the importance of understanding the harmony of competing spatial demands that can shape and maintain mammalian skull architecture during ontogeny.

Testing the occurrence of convergence in the craniomandibular shape evolution of living carnivorans

Convergence consists in the independent evolution of similar traits in distantly related species. The mammalian craniomandibular complex constitutes an ideal biological structure to investigate ecomorphological dynamics and the carnivorans, due to their phenotypic variability and ecological flexibility, offer an interesting case study to explore the occurrence of convergent evolution. Here, we applied multiple pattern‐based metrics to test the occurrence of convergence in the craniomandibular shape of extant carnivorans. To this aim, we tested for convergence in many dietary groups and analyzed several cases of carnivoran convergence concerning either ecologically equivalent species or ecologically similar species of different body sizes described in the literature. Our results validate the occurrence of convergence in ecologically equivalent species in a few cases (as well as in the case of giant and red pandas), but almost never support the occurrence of convergent evolution in dietary categories of living carnivorans. Therefore, convergent evolution in this clade appears to be a rare phenomenon. This is probably the consequence of a complex interplay of one‐to‐many, many‐to‐one, and many‐to‐many relationships taking place between ecology, biomechanics, and morphology.

Association between shape changes and bone remodeling patterns in the middle face during ontogeny in South American populations

The morphology of facial bones is modeled by processes of bone formation and resorption induced by interactions between tissues and compensatory responses. However, the role of remodeling patterns on the morphological changes within and among populations has been scarcely explored. Here, we assess the association between facial shape and the underlying bone cell activity throughout the ontogeny in two Amerindian populations that represent the extremes of craniofacial variation in South America. The sample comprises 71 individuals (36 adults and 35 subadults) representing hunter-gatherers from Patagonia and horticulturists from Northwest Argentina. We analyzed the shape and size of the zygomatic and the maxilla, and compared them with the patterns of bone formation and resorption. Bone formation and resorption were described by quantitative histological analysis of bone surfaces. Morphological changes were described by landmarks and semilandmarks digitized on 3D surfaces obtained from CT images. The results from multivariate statistics analysis show that the patterns of bone remodeling are associated with variation in the morphology of the middle face. We found a similar pattern of facial shape variation along the ontogenetic trajectory in the two samples, and a similar trend in the amount of formation and resorption activities across ages. The main differences between samples were found in the distribution of the areas of bone formation and resorption, possibly associated with mechanical bone response to masticatory loading. These findings provide clues about the processes and mechanisms of bone development involved in the facial morphological differentiation in human populations from southern South America.

Oral processing, sexual selection, and size variation in the circumorbital region of Colobus and Piliocolobus

OBJECTIVES

The function of the browridge in primates is a subject of enduring debate. Early studies argued for a role in resisting masticatory stresses, but recent studies have suggested sexual signaling as a biological role. We tested associations between circumorbital form, diet, oral processing, and social behavior in two species of colobus monkey-the king colobus (Colobus polykomos) and western red or bay colobus (Piliocolobus badius).

MATERIALS AND METHODS

We quantified circumorbital size and dimorphism in a sample of 98 crania. Controlling for age and facial size, we tested whether variation in circumorbital morphology can be explained by variation in diet, oral processing behavior, masticatory muscle size, and mating system. To contextualize our results, we included a broader sample of facial dimorphism for 67 anthropoid species.

RESULTS

Greater circumorbital thickness is unrelated to the stresses of food processing. King colobus engages in longer bouts of anterior tooth use, chews more per ingestive event, and processes a tougher diet, yet circumorbital thickness of C. polykomos is reduced compared to P. badius. Differences in circumorbital development do not vary with wear or facial size. Greater sexual dimorphism is present in P. badius; comparisons across anthropoids indicated patterns of circumorbital dimorphism were decoupled from overall size dimorphism.

CONCLUSIONS

The expanded circumorbits of male red colobus monkeys evolved in response to intense male-male competition. This hypothesis is consistent with the pattern across anthropoid primates and highlights the underappreciated role of sexual selection in shaping the primate face.

The Intertwined Evolution and Development of Sutures and Cranial Morphology

Phenotypic variation across mammals is extensive and reflects their ecological diversification into a remarkable range of habitats on every continent and in every ocean. The skull performs many functions to enable each species to thrive within its unique ecological niche, from prey acquisition, feeding, sensory capture (supporting vision and hearing) to brain protection. Diversity of skull function is reflected by its complex and highly variable morphology. Cranial morphology can be quantified using geometric morphometric techniques to offer invaluable insights into evolutionary patterns, ecomorphology, development, taxonomy, and phylogenetics. Therefore, the skull is one of the best suited skeletal elements for developmental and evolutionary analyses. In contrast, less attention is dedicated to the fibrous sutural joints separating the cranial bones. Throughout postnatal craniofacial development, sutures function as sites of bone growth, accommodating expansion of a growing brain. As growth frontiers, cranial sutures are actively responsible for the size and shape of the cranial bones, with overall skull shape being altered by changes to both the level and time period of activity of a given cranial suture. In keeping with this, pathological premature closure of sutures postnatally causes profound misshaping of the skull (craniosynostosis). Beyond this crucial role, sutures also function postnatally to provide locomotive shock absorption, allow joint mobility during feeding, and, in later postnatal stages, suture fusion acts to protect the developed brain. All these sutural functions have a clear impact on overall cranial function, development and morphology, and highlight the importance that patterns of suture development have in shaping the diversity of cranial morphology across taxa. Here we focus on the mammalian cranial system and review the intrinsic relationship between suture development and morphology and cranial shape from an evolutionary developmental biology perspective, with a view to understanding the influence of sutures on evolutionary diversity. Future work integrating suture development into a comparative evolutionary framework will be instrumental to understanding how developmental mechanisms shaping sutures ultimately influence evolutionary diversity.

Moment arm function dictates patella sagittal height anatomy: Rabbit epiphysiodesis model alters limb length ratios and subsequent patellofemoral anatomical development

Patellofemoral anatomical dysplasia is associated with patellofemoral instability and pain. The closure of the knee physis occurs at the same age as the peak incidence of patellofemoral dislocation. This study determined the effect on the patellofemoral anatomical development in a rabbit epiphysiodesis model. Twenty-four skeletally immature New Zealand White rabbits were divided into three groups (a) distal femur epiphysiodesis (FE) (b) proximal tibia epiphysiodesis (TE) (c) control; no epiphysiodesis (C) performed at 6 weeks of age. The primary endpoint was shape analysis using three-dimensional reconstructions of micro-computed tomographys (CTs) performed at 30 weeks of age. The limb length ratios (femur:tibia) were significantly different for both FE (mean 0.72, SD 0.0381, P < .001) and TE (mean 0.91, SD 0.0383, P < .001) treatment groups compared to control (mean 0.81, SD 0.0073). Patella height, as measured from the most distal point of the patella to the tibial joint surface (modified Caton-Deschamps measurement), was lower (baja) in the FE and higher (alta) for the TE, compared with the control group. Our findings suggest femoral and tibial shortening can influence the development of the patellofemoral joint, which may be dictated by moment arm function and is potentially responsible for the etiology of patella alta. Future studies are warranted to explore this association further with the view for the development of treatment options for patella alta in human patients.

Anatomical comparison across heads, fore- and hindlimbs in mammals using network models

Animal body parts evolve with variable degrees of integration that nonetheless yield functional adult phenotypes: but, how? The analysis of modularity with Anatomical Network Analysis (AnNA) is used to quantitatively determine phenotypic modules based on the physical connection among anatomical elements, an approach that is valuable to understand developmental and evolutionary constraints. We created anatomical network models of the head, forelimb, and hindlimb of two taxa considered to represent a 'generalized' eutherian (placental: mouse) and metatherian (marsupial: opossum) anatomical configuration and compared them with our species, which has a derived eutherian configuration. In these models, nodes represent anatomical units and links represent their physical connection. Here, we aimed to identify: (1) the commonalities and differences in modularity between species, (2) whether modules present a potential phylogenetic character, and (3) whether modules preferentially reflect either developmental or functional aspects of anatomy, or a mix of both. We predicted differences between networks of metatherian and eutherian mammals that would best be explained by functional constraints, versus by constraints of development and/or phylogeny. The topology of contacts between bones, muscles, and bones + muscles showed that, among all three species, skeletal networks were more similar than musculoskeletal networks. There was no clear indication that humans and mice are more alike when compared to the opossum overall, even though their musculoskeletal and skeletal networks of fore- and hindlimbs are slightly more similar. Differences were greatest among musculoskeletal networks of heads and next of forelimbs, which showed more variation than hindlimbs, supporting previous anatomical studies indicating that in general the configuration of the hindlimbs changes less across evolutionary history. Most observations regarding the anatomical networks seem to be best explained by function, but an exception is the adult opossum ear ossicles. These ear bones might form an independent module because the incus and malleus are involved in forming a functional primary jaw that enables the neonate to attach to the teat, where this newborn will complete its development. Additionally, the human data show a specialized digit 1 module (thumb/big toe) in both limb types, likely the result of functional and evolutionary pressures, as our ape ancestors had highly movable big toes and thumbs.

A model of developmental canalization, applied to human cranial form

Developmental mechanisms that canalize or compensate perturbations of organismal development (targeted or compensatory growth) are widely considered a prerequisite of individual health and the evolution of complex life, but little is known about the nature of these mechanisms. It is even unclear if and how a “target trajectory” of individual development is encoded in the organism’s genetic-developmental system or, instead, emerges as an epiphenomenon. Here we develop a statistical model of developmental canalization based on an extended autoregressive model. We show that under certain assumptions the strength of canalization and the amount of canalized variance in a population can be estimated, or at least approximated, from longitudinal phenotypic measurements, even if the target trajectories are unobserved. We extend this model to multivariate measures and discuss reifications of the ensuing parameter matrix. We apply these approaches to longitudinal geometric morphometric data on human postnatal craniofacial size and shape as well as to the size of the frontal sinuses. Craniofacial size showed strong developmental canalization during the first 5 years of life, leading to a 50% reduction of cross-sectional size variance, followed by a continual increase in variance during puberty. Frontal sinus size, by contrast, did not show any signs of canalization. Total variance of craniofacial shape decreased slightly until about 5 years of age and increased thereafter. However, different features of craniofacial shape showed very different developmental dynamics. Whereas the relative dimensions of the nasopharynx showed strong canalization and a reduction of variance throughout postnatal development, facial orientation continually increased in variance. Some of the signals of canalization may owe to independent variation in developmental timing of cranial components, but our results indicate evolved, partly mechanically induced mechanisms of canalization that ensure properly sized upper airways and facial dimensions.

Developmental mechanisms that canalize or compensate perturbations of organismal development are a prerequisite of individual health and the evolution of complex life. However, surprisingly little is known about these mechanisms, partly because the “target trajectories” of individual development cannot be directly observed. Here we develop a statistical model of developmental canalization that allows one to estimate the strength of canalization and the amount of canalized variance in a population even if the target trajectories are unobserved. We applied these approaches to data on human postnatal craniofacial growth. Whereas overall craniofacial size was strongly canalized during the first 5 years of age, frontal sinus size did not show any signs of canalization. The relative dimensions of the nasopharynx showed strong canalization and a reduction of variance throughout postnatal development, whereas other shape features, such as facial orientation, continually increased in variance. Our results indicate evolved, partly mechanically induced mechanisms of canalization that ensure properly sized upper airways and facial dimensions.

FACEts of mechanical regulation in the morphogenesis of craniofacial structures

During embryonic development, organs undergo distinct and programmed morphological changes as they develop into their functional forms. While genetics and biochemical signals are well recognized regulators of morphogenesis, mechanical forces and the physical properties of tissues are now emerging as integral parts of this process as well. These physical factors drive coordinated cell movements and reorganizations, shape and size changes, proliferation and differentiation, as well as gene expression changes, and ultimately sculpt any developing structure by guiding correct cellular architectures and compositions. In this review we focus on several craniofacial structures, including the tooth, the mandible, the palate, and the cranium. We discuss the spatiotemporal regulation of different mechanical cues at both the cellular and tissue scales during craniofacial development and examine how tissue mechanics control various aspects of cell biology and signaling to shape a developing craniofacial organ.

Neosagittal Suture Formation after Endoscopic Sagittal Strip Craniectomy: A Case Report and Literature Review

The fate of the excised synostotic suture in craniosynostosis remains relatively understudied. The purpose of this report is to describe a case of neosagittal suture formation following endoscopic excision of a pathology-proven synostotic suture, with CT demonstration of complete reossification in the areas adjacent to the neosagittal suture. We additionally review the existing literature on neosuture formation that has been published over the past 50 years. We conclude that continued investigation is warranted, both through histological comparison of normal and neosutures and through studies to determine clinical risk factors, as this may improve our understanding of the underlying mechanism of pathologic premature suture fusion in craniosynostosis.

Morphometric Variation at Different Spatial Scales: Coordination and Compensation in the Emergence of Organismal Form

It is a classic aim of quantitative and evolutionary biology to infer genetic architecture and potential evolutionary responses to selection from the variance–covariance structure of measured traits. But a meaningful genetic or developmental interpretation of raw covariances is difficult, and classic concepts of morphological integration do not directly apply to modern morphometric data. Here, we present a new morphometric strategy based on the comparison of morphological variation across different spatial scales. If anatomical elements vary completely independently, then their variance accumulates at larger scales or for structures composed of multiple elements: morphological variance would be a power function of spatial scale. Deviations from this pattern of “variational self-similarity” (serving as a null model of completely uncoordinated growth) indicate genetic or developmental coregulation of anatomical components. We present biometric strategies and R scripts for identifying patterns of coordination and compensation in the size and shape of composite anatomical structures. In an application to human cranial variation, we found that coordinated variation and positive correlations are prevalent for the size of cranial components, whereas their shape was dominated by compensatory variation, leading to strong canalization of cranial shape at larger scales. We propose that mechanically induced bone formation and remodeling are key mechanisms underlying compensatory variation in cranial shape. Such epigenetic coordination and compensation of growth are indispensable for stable, canalized development and may also foster the evolvability of complex anatomical structures by preserving spatial and functional integrity during genetic responses to selection.[Cranial shape; developmental canalization; evolvability; morphological integration; morphometrics; phenotypic variation; self-similarity.]

Nose approximation among South African groups from cone-beam computed tomography (CBCT) using a new computer-assisted method based on automatic landmarking

Considering the high demand for the identification of unknown remains in South Africa, a need exists to establish reliable facial approximation techniques that will take into account sex and age and, most importantly, be useful within the South African context. This study aimed to provide accurate statistical models for predicting nasal soft-tissue shape from information about the underlying skull subtract among a South African sample. The database containing 200 cone-beam computer tomography (CBCT) scans (100 black South Africans and 100 white South Africans). The acquisition and extraction of the 3D relevant anatomical structures (hard- and soft-tissue) were performed by an automated three-dimensional (3D) method based on an automatic dense landmarking procedure using MeVisLab © v. 2.7.1 software. An evaluation of shape differences attributed to known factors (ancestry, sex, size, and age) was performed using geometric morphometric and statistical models of prediction were created using a Projection onto Latent Structures Regression (PLSR) algorithm. The accuracy of the estimated soft-tissue nose was evaluated in terms of metric deviations on training and un-trained datasets. Our findings demonstrated the influence of factors (sex, aging, and allometry) on the variability of the hard- and soft-tissue among two South African population groups. This research provides accurate statistical models optimized by including additional information such as ancestry, sex, and age. When using the landmark-to landmark distances, the prediction errors ranged between 1.769mm and 2.164mm for black South Africans at the tip of the nose and the alae, while they ranged from 2.068mm to 2.175mm for the white subsample. The prediction errors on un-trained data were slightly larger, ranging between 2.139mm and 2.833mm for the black South African sample at the tip of the nose and the alae and ranging from 2.575mm to 2.859mm for the white South African sample. This research demonstrates the utilization of an automated 3Dmethod based on an automatic landmarking method as a convenient prerequisite for providing a valid and reliable nose prediction model that meets population-specific standards for South Africans.