Masticatory-stress hypotheses and the supraorbital region of primates

Bite force production and the origin of Homo

The divergence of Homo from gracile australopiths has been described as a trend of decreasing dentognathic size and robusticity, precipitated by stone tool use and/or a shift to softer foods, including meat. Yet, mechanical evidence supporting this narrative is sparse, and isotopic and archaeological data have led to the suggestion that a shift away from a gracile australopith-like diet would not have occurred in the most basal members of Homo but rather only with the appearance of Homo erectus, implying that the origin of our genus is not rooted in dietary change. Here, we provide mechanical evidence that Homo habilis exhibits an australopith-like pattern of facial strain during biting but, unlike most australopiths, was not suited for a diet that required forceful processing by the molar teeth. Homo habilis was at elevated risk of distractive jaw joint forces during those bites, constraining muscle recruitment so as to avoid generating uncomfortable/dangerous levels of tension in the joint. Modern humans have similar limitations. This suggests that selection on skeletal traits favouring forceful postcanine processing was relaxed by the earliest stages in the evolution of our genus, implying that dietary or food processing changes played an important role in the emergence of Homo.

Sagittal suture strain in capuchin monkeys (Sapajus and Cebus) during feeding

OBJECTIVES

Morphological variation in cranial sutures is used to infer aspects of primate feeding behavior, including diet, but strain regimes across sutures are not well documented. Our aim is to test hypotheses about sagittal suture morphology, strain regime, feeding behavior, and muscle activity relationships in robust Sapajus and gracile Cebus capuchin primates.

MATERIALS AND METHODS

Morphometrics of sinuosity in three regions of the sagittal suture were compared among museum specimens of Sapajus and Cebus, as well as in robust and gracile lab specimens. In vivo strains and bilateral electromyographic (EMG) activity were recorded from these regions in the temporalis muscles of capuchin primates while they fed on mechanically-varying foods.

RESULTS

Sapajus and the anterior suture region exhibited greater sinuosity than Cebus and posterior regions. In vivo data reveal minor differences in strain regime between robust and gracile phenotypes but show higher strain magnitudes in the middle suture region and higher tensile strains anteriorly. After gage location, feeding behavior has the most consistent and strongest impact on strain regime in the sagittal suture. Strain in the anterior suture has a high tension to compression ratio compared to the posterior region, especially during forceful biting in the robust Sapajus-like individual.

DISCUSSION

Sagittal suture complexity in robust capuchins likely reflects feeding behaviors associated with mechanically challenging foods. Sutural strain regimes in other anthropoid primates may also be affected by activity in feeding muscles.

Mechanical compensation in the evolution of the early hominin feeding apparatus

Australopiths, a group of hominins from the Plio-Pleistocene of Africa, are characterized by derived traits in their crania hypothesized to strengthen the facial skeleton against feeding loads and increase the efficiency of bite force production. The crania of robust australopiths are further thought to be stronger and more efficient than those of gracile australopiths. Results of prior mechanical analyses have been broadly consistent with this hypothesis, but here we show that the predictions of the hypothesis with respect to mechanical strength are not met: some gracile australopith crania are as strong as that of a robust australopith, and the strength of gracile australopith crania overlaps substantially with that of chimpanzee crania. We hypothesize that the evolution of cranial traits that increased the efficiency of bite force production in australopiths may have simultaneously weakened the face, leading to the compensatory evolution of additional traits that reinforced the facial skeleton. The evolution of facial form in early hominins can therefore be thought of as an interplay between the need to increase the efficiency of bite force production and the need to maintain the structural integrity of the face.

Geometric morphometric variability in the supraorbital and orbital region of Middle Pleistocene hominins: Implications for the taxonomy and evolution of later Homo

This study assessed variation in the supraorbital and orbital region of the Middle Pleistocene hominins (MPHs), sometimes called Homo heidelbergensis s.l., to test whether it matched the expectations of intraspecific variation. The morphological distinctiveness and relative variation of this region, which is relatively well represented in the hominin fossil record, was analyzed quantitatively in a comparative taxonomic framework. Coordinates of 230 3D landmarks (20) and sliding semilandmarks (210) were collected from 704 specimens from species of Homo, Australopithecus, Paranthropus, Gorilla, Pan, Papio, and Macaca. Results showed that the MPHs had expected levels of morphological distinctiveness and intragroup and intergroup variation in supraorbital and orbital morphology, relative to commonly recognized non-hominin catarrhine species. However, the Procrustes distances between this group and H. sapiens were significantly higher than expected for two closely related catarrhine species. Furthermore, this study showed that variation within the MPH could be similarly well contained within existing hypodigms of H. sapiens, H. neanderthalensis, and H. erectus s.l. Although quantitative assessment of supraorbital and orbital morphology did not allow differentiation between taxonomic hypotheses in later Homo, it could be used to test individual taxonomic affiliation and identify potentially anomalous individuals. This study confirmed a complicated pattern of supraorbital and orbital morphology in the MPH fossil record and raises further questions over our understanding of the speciation of H. sapiens and H. neanderthalensis and taxonomic diversity in later Homo.

The cranial biomechanics and feeding performance of Homo floresiensis

Homo floresiensis is a small-bodied hominin from Flores, Indonesia, that exhibits plesiomorphic dentognathic features, including large premolars and a robust mandible, aspects of which have been considered australopith-like. However, relative to australopith species, H. floresiensis exhibits reduced molar size and a cranium with diminutive midfacial dimensions similar to those of later Homo, suggesting a reduction in the frequency of forceful biting behaviours. Our study uses finite-element analysis to examine the feeding biomechanics of the H. floresiensis cranium. We simulate premolar (P³) and molar (M²) biting in a finite-element model (FEM) of the H. floresiensis holotype cranium (LB1) and compare the mechanical results with FEMs of chimpanzees, modern humans and a sample of australopiths (MH1, Sts 5, OH5). With few exceptions, strain magnitudes in LB1 resemble elevated levels observed in modern Homo. Our analysis of LB1 suggests that H. floresiensis could produce bite forces with high mechanical efficiency, but was subject to tensile jaw joint reaction forces during molar biting, which perhaps constrained maximum postcanine bite force production. The inferred feeding biomechanics of H. floresiensis closely resemble modern humans, suggesting that this pattern may have been present in the last common ancestor of Homo sapiens and H. floresiensis.

Population affinity and variation of sexual dimorphism in three-dimensional facial forms: comparisons between Turkish and Japanese populations

Examining the extent to which sex differences in three-dimensional (3D) facial soft tissue configurations are similar across diverse populations could suggest the source of the indirect evolutionary benefits of facial sexual dimorphism traits. To explore this idea, we selected two geographically distinct populations. Three-dimensional model faces were derived from 272 Turkish and Japanese men and women; their facial morphologies were evaluated using landmark and surface-based analyses. We found four common facial features related to sexual dimorphism. Both Turkish and Japanese females had a shorter lower face height, a flatter forehead, greater sagittal cheek protrusion in the infraorbital region but less prominence of the cheek in the parotid-masseteric region, and an antero-posteriorly smaller nose when compared with their male counterparts. The results indicated the possible phylogenetic contribution of the masticatory organ function and morphogenesis on sexual dimorphism of the human face in addition to previously reported biological and psychological characteristics, including sexual maturity, reproductive potential, mating success, general health, immune response, age, and personality.

The presence of Wormian bones increases the fracture resistance of equine cranial bone

Wormian (intrasutural) bones are small, irregular bones, that are found in the cranial sutures of the skull. The occurrence of Wormian bones in human skulls has been well documented but few studies have detected the presence of such bones in domestic animals. Although some research has linked the presence of Wormian bones to bone pathology, its anatomical significance in healthy individuals is not known. To the best of our knowledge, no previous study has examined the biomechanical features of Wormian bone. This study uses microCT imaging of the parietal bone region to determine the frequency of occurrence of Wormian bones in horse skulls and, through 3-point bending tests, to calculate the mechanical differences that result from the presence of such bones. In addition, bone properties such as bone mineral density (BMD) and stiffness were measured and analysed to determine the influence of Wormian bone. Our findings on 54 specimens taken from 10 horses (ages ranging from 4 to 29 years) showed that Wormian bone was present in 70% of subjects and that its occurrence was unrelated to age or sex. 3-point bend tests revealed that the stiffness normalised by cross section area (P = 0.038) was lower in samples where Wormian bone was present. An idealised Finite Element simulation confirmed that the presence of Wormian bone reduced the maximum stress and strain, as well as their distribution throughout the sample. We consequently conclude that the presence of Wormian bones, which are confined to the calvaria, increase the compliance of the bone and reduce the likelihood of skull fracture. As all skull samples were collected from a local abattoir, ethical approval was not required for this work.

Oral processing, sexual selection, and size variation in the circumorbital region of Colobus and Piliocolobus

OBJECTIVES

The function of the browridge in primates is a subject of enduring debate. Early studies argued for a role in resisting masticatory stresses, but recent studies have suggested sexual signaling as a biological role. We tested associations between circumorbital form, diet, oral processing, and social behavior in two species of colobus monkey-the king colobus (Colobus polykomos) and western red or bay colobus (Piliocolobus badius).

MATERIALS AND METHODS

We quantified circumorbital size and dimorphism in a sample of 98 crania. Controlling for age and facial size, we tested whether variation in circumorbital morphology can be explained by variation in diet, oral processing behavior, masticatory muscle size, and mating system. To contextualize our results, we included a broader sample of facial dimorphism for 67 anthropoid species.

RESULTS

Greater circumorbital thickness is unrelated to the stresses of food processing. King colobus engages in longer bouts of anterior tooth use, chews more per ingestive event, and processes a tougher diet, yet circumorbital thickness of C. polykomos is reduced compared to P. badius. Differences in circumorbital development do not vary with wear or facial size. Greater sexual dimorphism is present in P. badius; comparisons across anthropoids indicated patterns of circumorbital dimorphism were decoupled from overall size dimorphism.

CONCLUSIONS

The expanded circumorbits of male red colobus monkeys evolved in response to intense male-male competition. This hypothesis is consistent with the pattern across anthropoid primates and highlights the underappreciated role of sexual selection in shaping the primate face.

Ingestive behaviors in bearded capuchins (Sapajus libidinosus)

The biomechanical and adaptive significance of variation in craniodental and mandibular morphology in fossil hominins is not always clear, at least in part because of a poor understanding of how different feeding behaviors impact feeding system design (form–function relationships). While laboratory studies suggest that ingestive behaviors produce variable loading, stress, and strain regimes in the cranium and mandible, understanding the relative importance of these behaviors for feeding system design requires data on their use in wild populations. Here we assess the frequencies and durations of manual, ingestive, and masticatory behaviors from more than 1400 observations of feeding behaviors video-recorded in a wild population of bearded capuchins (Sapajus libidinosus) at Fazenda Boa Vista in Piauí, Brazil. Our results suggest that ingestive behaviors in wild Sapajus libidinosus were used for a range of food material properties and typically performed using the anterior dentition. Coupled with previous laboratory work indicating that ingestive behaviors are associated with higher mandibular strain magnitudes than mastication, these results suggest that ingestive behaviors may play an important role in craniodental and mandibular design in capuchins and may be reflected in robust adaptations in fossil hominins.

Biomechanics of the mandible of Macaca mulatta during the power stroke of mastication: Loading, deformation, and strain regimes and the impact of food type

Mandible morphology has yet to yield definitive information on primate diet, probably because of poor understanding of mandibular loading and strain regimes, and overreliance on simple beam models of mandibular mechanics. We used a finite element model of a macaque mandible to test hypotheses about mandibular loading and strain regimes and relate variation in muscle activity during chewing on different foods to variation in strain regimes. The balancing-side corpus is loaded primarily by sagittal shear forces and sagittal bending moments. On the working side, sagittal bending moments, anteroposterior twisting moments, and lateral transverse bending moments all reach similar maxima below the bite point; sagittal shear is the dominant loading regime behind the bite point; and the corpus is twisted such that the mandibular base is inverted. In the symphyseal region, the predominant loading regimes are lateral transverse bending and negative twisting about a mediolateral axis. Compared with grape and dried fruit chewing, nut chewing is associated with larger sagittal and transverse bending moments acting on balancing- and working-side mandibles, larger sagittal shear on the working side, and larger twisting moments about vertical and transverse axes in the symphyseal region. Nut chewing is also associated with higher minimum principal strain magnitudes in the balancing-side posterior ramus; higher sagittal shear strain magnitudes in the working-side buccal alveolar process and the balancing-side oblique line, recessus mandibulae, and endocondylar ridge; and higher transverse shear strains in the symphyseal region, the balancing-side medial prominence, and the balancing-side endocondylar ridge. The largest food-related differences in maximum principal and transverse shear strain magnitudes are in the transverse tori and in the balancing-side medial prominence, extramolar sulcus, oblique line, and endocondylar ridge. Food effects on the strain regime are most salient in areas not traditionally investigated, suggesting that studies seeking dietary effects on mandible morphology might be looking in the wrong places.

Assessing zygomatic shape and size for estimating sex and ancestry in a South African sample

Unidentified, decomposed and skeletonised human remains are frequently found in South Africa, therefore, standardised, reliable and relevant sex and ancestry estimation methods are required for forensic identification. This study assessed sex and ancestral variation in zygomatic size and shape in a South African population using geometric morphometric analyses. The zygoma of 158 South African individuals were sampled. Eight zygomatic landmarks were captured in 3-dimensions using a Microscribe G2 digitiser and assessed using procrustean geometric morphometrics. Shape and size differences were analysed using multivariate linear regression, discriminant function and canonical variate analyses. Males had significantly larger zygomas than females. Significant shape variation was found between ancestral groups. Bantu-speaking and Mixed ancestry individuals had narrower, shorter and more anteriorly projecting orbital margins, whilst Europeans had vertically elongated and receded orbital margins. European ancestral groups were most discernible from Bantu-speakers and Mixed ancestral groups. Ancestry estimation accuracies improved when ancestry was aggregated with sex. Pairwise ancestry-linked comparisons in females were as follows; Bantu-speakers (76%) from Europeans (72%), Bantu-speakers (71%) from Mixed ancestry (59%) and European (72%) from Mixed ancestry (63%). Similarly, ancestry-linked comparisons in males were as follows; Bantu-speakers (77%) from Europeans (81%), Bantu-speakers (53%) from Mixed ancestry (59%) and European (72%) from Mixed ancestry (82%). Size differences are putatively linked to variations in hormone-regulated growth and muscular robusticity between males and females. Shape variations between ancestral groups are likely attributable to the heterogenous genetic and ancestral origins of the South African population. It is challenging to distinguish between South Africa Bantu speakers and Mixed ancestry people due to Mixed ancestry individuals having variable genetic contributions from Khoesan, Bantu-speakers, Europeans and Asians. Bantu-speaking and Mixed ancestry people had zygomatic morphologies consistent with historical thermoregulatory adaptations to sub-Saharan climates, reported in African-descendants. Zygomatic morphology in European descendants suggests ancestral origins from colder climatic regions. This study demonstrated the utility of the zygoma in distinguishing between ancestral groups in South Africa, but further research is required to develop population-specific standards to distinguish between South African populations with shared African ancestry. The zygoma shows a promising ability to estimate sex and ancestry in South Africans, suggesting population specific standards for this bone may be of forensic interest.

Individual variation of the masticatory system dominates 3D skull shape in the herbivory-adapted marsupial wombats

Background

Within-species skull shape variation of marsupial mammals is widely considered low and strongly size-dependent (allometric), possibly due to developmental constraints arising from the altricial birth of marsupials. However, species whose skulls are impacted by strong muscular stresses – particularly those produced through mastication of tough food items – may not display such intrinsic patterns very clearly because of the known plastic response of bone to muscle activity of the individual. In such cases, allometry may not dominate within-species shape variation, even if it is a driver of evolutionary shape divergence; ordination of shape in a geometric morphometric context through principal component analysis (PCA) should reveal main variation in areas under masticatory stress (incisor region/zygomatic arches/mandibular ramus); but this main variation should emerge from high individual variability and thus have low eigenvalues.

Results

We assessed the evidence for high individual variation through 3D geometric morphometric shape analysis of crania and mandibles of three species of grazing-specialized wombats, whose diet of tough grasses puts considerable strain on their masticatory system. As expected, we found little allometry and low Principal Component 1 (PC1) eigenvalues within crania and mandibles of all three species. Also as expected, the main variation was in the muzzle, zygomatic arches, and masticatory muscle attachments of the mandibular ramus. We then implemented a new test to ask if the landmark variation reflected on PC1 was reflected in individuals with opposite PC1 scores and with opposite shapes in Procrustes space. This showed that correspondence between individual and ordinated shape variation was limited, indicating high levels of individual variability in the masticatory apparatus.

Discussion

Our results are inconsistent with hypotheses that skull shape variation within marsupial species reflects a constraint pattern. Rather, they support suggestions that individual plasticity can be an important determinant of within-species shape variation in marsupials (and possibly other mammals) with high masticatory stresses, making it difficult to understand the degree to which intrinsic constraints act on shape variation at the within-species level. We conclude that studies that link micro- and macroevolutionary patterns of shape variation might benefit from a focus on species with low-impact mastication, such as carnivorous or frugivorous species.

Could mastication modify the shape of the orbit? A scannographic study in humans

PURPOSE

Since prehistory, changes of the facial skeleton have been related to the modification of diet. More recent studies have shown changes in the morphology of the mandible and maxilla due to variations of strain during mastication. The temporal muscle (TM) is a strong masticatory muscle, with its insertions extending through the temporal fossa. Our objective is to observe the relations between the TM and the lateral orbital wall (LOW) which could indicate an influence of mastication on the shape of the LOW.

METHODS

We conducted a retrospective study using 100 CT scans. The length of the lateral orbital wall (LLOW), the angle between LOW and the medial orbital wall (MOW), the cross-sectional areas of LOW and of the TMs were measured on both sides of each CT scan. The correlation between TMs and other three parameters was studied by Pearson correlations.

RESULTS

A correlation was found between TMs and LOWs, a lower with LLOW, and a very weak and negative correlation between LOW/MOW angle.

CONCLUSIONS

Anatomical knowledge about TM and investigation of masticatory strains lead us to think that mastication have minimal effect on the morphology of the LOW, only on the frontal process of zygomatic. This may explain, in part, why the LOW is the strongest wall of the orbit.

Taking a big bite: Working together to better understand the evolution of feeding in primates

The study of adaptation requires the integration of an array of different types of data. A single individual can find such integration daunting, if not impossible. In an effort to clarify the role of diet in the evolution of the primate craniofacial and dental apparatus, we assembled a team of researchers that have various types and degrees of expertise. This interaction has provided a range of insights for all contributors, and this has helped to refine questions, clarify the possibilities and limitations that laboratory and field settings offer, and further explore the ways in which laboratory and field data can be suitably integrated. A complete and accurate picture of dietary adaptation cannot be gained in isolation. Collaboration provides the bridge to a more holistic view of primate biology and evolution.

Association of feeding behavior with jaw bone metabolism and tongue pressure

In recent decades, the eating habits of children and adolescents have undergone many changes due to the diversification of lifestyles worldwide. Reduced masticatory function in growing animals results in changes in the mandible, including a decrease in bone mass. However, the influence of different eating behaviors on jaw bone metabolism (e.g., the palatal palate) during the growth period is not fully understood. In addition, recent clinical studies reported that masticatory performance is positively related to tongue pressure in adults, but no consensus has been reached regarding whether tongue pressure is related to masticatory performance in children. This review summarizes current findings related to these issues, focusing on the influence of different feeding behaviors on jaw bone metabolism, including the development of tongue pressure. Consumption of a soft diet had a negative impact on jaw bone metabolism in the maxilla and mandible of rats; however, mastication of a hard diet recovered the collapsed equilibrium of bone turnover caused by a soft diet during growth. Tongue pressure is closely associated with an increase in masticatory performance in children. Peak maximum tongue pressure is reached earlier in women than in men. Before reaching adulthood, women require intervention to increase their peak tongue pressure.

Biting mechanics and niche separation in a specialized clade of primate seed predators

We analyzed feeding biomechanics in pitheciine monkeys (Pithecia, Chiropotes, Cacajao), a clade that specializes on hard-husked unripe fruit (sclerocarpy) and resistant seeds (seed predation). We tested the hypothesis that pitheciine crania are well-suited to generate and withstand forceful canine and molar biting, with the prediction that they generate bite forces more efficiently and better resist masticatory strains than the closely-related Callicebus, which does not specialize on unripe fruits and/or seeds. We also tested the hypothesis that Callicebus-Pithecia-Chiropotes-Cacajao represent a morphocline of increasing sclerocarpic specialization with respect to biting leverage and craniofacial strength, consistent with anterior dental morphology. We found that pitheciines have higher biting leverage than Callicebus and are generally more resistant to masticatory strain. However, Cacajao was found to experience high strain magnitudes in some facial regions. We therefore found limited support for the morphocline hypothesis, at least with respect to the mechanical performance metrics examined here. Biting leverage in Cacajao was nearly identical (or slightly less than) in Chiropotes and strain magnitudes during canine biting were more likely to follow a Cacajao-Chiropotes-Pithecia trend of increasing strength, in contrast to the proposed morphocline. These results could indicate that bite force efficiency and derived anterior teeth were selected for in pitheciines at the expense of increased strain magnitudes. However, our results for Cacajao potentially reflect reduced feeding competition offered by allopatry with other pitheciines, which allows Cacajao species to choose from a wider variety of fruits at various stages of ripeness, leading to reduction in the selection for robust facial features. We also found that feeding biomechanics in sympatric Pithecia and Chiropotes are consistent with data on food structural properties and observations of dietary niche separation, with the former being well-suited for the regular molar crushing of hard seeds and the latter better adapted for breaching hard fruits.

Bite force and cranial bone strain in four species of lizards

In vivo bone strain data provide direct evidence of strain patterns in the cranium during biting. Compared to mammals, in vivo bone strains in lizard skulls are poorly documented. This paper presents strain data from the skulls of Anolis equestris, Gekko gecko, Iguana iguana and Salvator merianae during transducer biting. Analysis of variance was used to investigate effects of bite force, bite point, diet, cranial morphology and cranial kinesis on strain magnitudes. Within individuals the most consistent determinants of variance in bone strain magnitudes are gage location and bite point, with the importance of bite force varying between individuals. Inter-site variance in strain magnitudes—strain gradient—is present in all individuals, and varies with bite point. Between individuals within species, variance in strain magnitude is driven primarily by variation in bite force, not gage location or bite point, suggesting that inter-individual variation in patterns of strain magnitude is minimal. Between species, variation in strain magnitudes is significantly impacted by bite force and species membership, as well as by interactions between gage location, species, and bite point. Independent of bite force, species differences in cranial strain magnitudes may reflect selection for different cranial morphology in relation to feeding function, but what these performance criteria are is not clear. The relatively low strain magnitudes in Iguana and Uromastyx compared to other lizards may be related to their herbivorous diet. Cranial kinesis and the presence or absence of postorbital and supratemporal bars are not important determinants of inter-specific variation in strain magnitudes.

The biomechanical significance of the frontal sinus in Kabwe 1 (Homo heidelbergensis)

Paranasal sinuses are highly variable among living and fossil hominins and their function(s) are poorly understood. It has been argued they serve no particular function and are biological 'spandrels' arising as a structural consequence of changes in associated bones and/or soft tissue structures. In contrast, others have suggested that sinuses have one or more functions, in olfaction, respiration, thermoregulation, nitric oxide production, voice resonance, reduction of skull weight, and craniofacial biomechanics. Here we assess the extent to which the very large frontal sinus of Kabwe 1 impacts on the mechanical performance of the craniofacial skeleton during biting. It may be that the browridge is large and the sinus has large trabecular struts traversing it to compensate for the effect of a large sinus on the ability of the face to resist forces arising from biting. Alternatively, the large sinus may have no impact and be sited where strains that arise from biting would be very low. If the former is true, then infilling of the sinus would be expected to increase the ability of the skeleton to resist biting loads, while removing the struts might have the opposite effect. To these ends, finite element models with hollowed and infilled variants of the original sinus were created and loaded to simulate different bites. The deformations arising due to loading were then compared among different models and bites by contrasting the strain vectors arising during identical biting tasks. It was found that the frontal bone experiences very low strains and that infilling or hollowing of the sinus has little effect on strains over the cranial surface, with small effects over the frontal bone. The material used to infill the sinus experienced very low strains. This is consistent with the idea that frontal sinus morphogenesis is influenced by the strain field experienced by this region such that it comes to lie entirely within a region of the cranium that would otherwise experience low strains. This has implications for understanding why sinuses vary among hominin fossils.

The Biomechanics of Zygomatic Arch Shape

Mammalian zygomatic arch shape is remarkably variable, ranging from nearly cylindrical to blade-like in cross section. Based on geometry, the arch can be hypothesized to be a sub-structural beam whose ability to resist deformation is related to cross sectional shape. We expect zygomatic arches with different cross sectional shapes to vary in the degree to which they resist local bending and torsion due to the contraction of the masseter muscle. A stiffer arch may lead to an increase in the relative proportion of applied muscle load being transmitted through the arch to other cranial regions, resulting in elevated cranial stress (and thus, strain). Here, we examine the mechanics of the zygomatic arch using a series of finite element modeling experiments in which the cross section of the arch of Pan troglodytes has been modified to conform to idealized shapes (cylindrical, elliptical, blade-like). We find that the shape of the zygomatic arch has local effects on stain that do not conform to beam theory. One exception is that possessing a blade-like arch leads to elevated strains at the postorbital zygomatic junction and just below the orbits. Furthermore, although modeling the arch as solid cortical bone did not have the effect of elevating strains in other parts of the face, as had been expected, it does have a small effect on stress associated with masseter contraction. These results are counterintuitive. Even though the arch has simple beam-like geometry, we fail to find a simple mechanical explanation for the diversity of arch shape. Anat Rec, 299:1734-1752, 2016. © 2016 Wiley Periodicals, Inc.

Elastic Properties of Chimpanzee Craniofacial Cortical Bone

Relatively few assessments of cranial biomechanics formally take into account variation in the material properties of cranial cortical bone. Our aim was to characterize the elastic properties of chimpanzee craniofacial cortical bone and compare these to the elastic properties of dentate human craniofacial cortical bone. From seven cranial regions, 27 cylindrical samples were harvested from each of five chimpanzee crania. Assuming orthotropy, axes of maximum stiffness in the plane of the cortical plate were derived using modified equations of Hooke's law in a Mathcad program. Consistent orientations among individuals were observed in the zygomatic arch and alveolus. The density of cortical bone showed significant regional variation (P < 0.001). The elastic moduli demonstrated significant differences between sites, and a distinct pattern where E₃  > E₂  > E₁ . Shear moduli were significantly different among regions (P < 0.001). The pattern by which chimpanzee cranial cortical bone varies in elastic properties resembled that seen in humans, perhaps suggesting that the elastic properties of craniofacial bone in fossil hominins can be estimated with at least some degree of confidence. Anat Rec, 299:1718-1733, 2016. © 2016 Wiley Periodicals, Inc.

Review of In Vivo Bone Strain Studies and Finite Element Models of the Zygomatic Complex in Humans and Nonhuman Primates: Implications for Clinical Research and Practice

The craniofacial skeleton is often described in the clinical literature as being comprised of vertical bony pillars, which transmit forces from the toothrow to the neurocranium as axial compressive stresses, reinforced transversely by buttresses. Here, we review the literature on bony microarchitecture, in vivo bone strain, and finite-element modeling of the facial skeleton of humans and nonhuman primates to address questions regarding the structural and functional existence of facial pillars and buttresses. Available bone material properties data do not support the existence of pillars and buttresses in humans or Sapajus apella. Deformation regimes in the zygomatic complex emphasize bending and shear, therefore conceptualizing the zygomatic complex of humans or nonhuman primates as a pillar obscures its patterns of stress, strain, and deformation. Human fossil relatives and chimpanzees exhibit strain regimes corroborating the existence of a canine-frontal pillar, but the notion of a zygomatic pillar has no support. The emerging consensus on patterns of strain and deformation in finite element models (FEMs) of the human facial skeleton corroborates hypotheses in the clinical literature regarding zygomatic complex function, and provide new insights into patterns of failure of titanium and resorbable plates in experimental studies. It is suggested that the "pillar and buttress" model of human craniofacial skeleton function be replaced with FEMs that more accurately and precisely represent in vivo function, and which can serve as the basis for future research into implants used in restoration of occlusal function and fracture repair. Anat Rec, 299:1753-1778, 2016. © 2016 Wiley Periodicals, Inc.

Betwixt and Between: Intracranial Perspective on Zygomatic Arch Plasticity and Function in Mammals

The zygomatic arch is morphologically complex, providing a key interface between the viscerocranium and neurocranium. It also serves as an attachment site for masticatory muscles, thereby linking it to the feeding apparatus. Though morphological variation related to differential loading is well known for many craniomandibular elements, the adaptive osteogenic response of the zygomatic arch remains to be investigated. Here, experimental data are presented that address the naturalistic influence of masticatory loading on the postweaning development of the zygoma and other cranial elements. Given the similarity of bone-strain levels among the zygoma and maxillomandibular elements, a rabbit and pig model were used to test the hypothesis that variation in cortical bone formation and biomineralization along the zygomatic arch and masticatory structures are linked to increased stresses. It was also hypothesized that neurocranial structures would be minimally affected by varying loads. Rabbits and pigs were raised for 48 weeks and 8 weeks, respectively. In both experimental models, CT analyses indicated that elevated masticatory loading did not induce differences in cortical bone thickness of the zygomatic arch, though biomineralization was positively affected. Hypotheses were supported regarding bone formation for maxillomandibular and neurocranial elements. Varying osteogenic responses in the arch suggests that skeletal adaptation, and corresponding variation in performance, may reside differentially at one level of bony architecture. Thus, it is possible that phenotypic diversity in the mammalian zygoma is due more singularly to natural selection (vs. plasticity). These findings underscore the complexity of the zygomatic arch and, more generally, determinants of skull form. Anat Rec, 299:1646-1660, 2016. © 2016 Wiley Periodicals, Inc.

Intracranial and hierarchical perspective on dietary plasticity in mammals

The effect of dietary properties on craniofacial form has been the focus of numerous functional studies, with increasingly more work dedicated to the importance of phenotypic plasticity. As bone is a dynamic tissue, morphological variation related to differential loading is well established for many masticatory structures. However, the adaptive osteogenic response of several cranial sites across multiple levels of bony organization remains to be investigated. Here, rabbits were obtained at weaning and raised for 48 weeks until adulthood in order to address the naturalistic influence of altered loading on the long-term development of masticatory and non-masticatory elements. Longitudinal data from micro-computed tomography (μCT) scans were used to test the hypothesis that variation in cortical bone formation and biomineralization in masticatory structures is linked to increased stresses during oral processing of mechanically challenging foods. It was also hypothesized that similar parameters for neurocranial structures would be minimally affected by varying loads as this area is characterized by low strains during mastication and reduced hard-tissue mechanosensitivity. Hypotheses were supported regarding bone formation for maxillomandibular and neurocranial elements, though biomineralization trends of masticatory structures did not mirror macroscale findings. Varying osteogenic responses in masticatory elements suggest that physiological adaptation, and corresponding variation in skeletal performance, may reside differentially at one level of bony architecture, potentially affecting the accuracy of behavioral and in silico reconstructions. Together, these findings underscore the complexity of bone adaptation and highlight functional and developmental variation in determinants of skull form.

Herbivorous dinosaur jaw disparity and its relationship to extrinsic evolutionary drivers

Morphological responses of nonmammalian herbivores to external ecological drivers have not been quantified over extended timescales. Herbivorous nonavian dinosaurs are an ideal group to test for such responses, because they dominated terrestrial ecosystems for more than 155 Myr and included the largest herbivores that ever existed. The radiation of dinosaurs was punctuated by several ecologically important events, including extinctions at the Triassic/Jurassic (Tr/J) and Jurassic/Cretaceous (J/K) boundaries, the decline of cycadophytes, and the origin of angiosperms, all of which may have had profound consequences for herbivore communities. Here we present the first analysis of morphological and biomechanical disparity for sauropodomorph and ornithischian dinosaurs in order to investigate patterns of jaw shape and function through time. We find that morphological and biomechanical mandibular disparity are decoupled: mandibular shape disparity follows taxonomic diversity, with a steady increase through the Mesozoic. By contrast, biomechanical disparity builds to a peak in the Late Jurassic that corresponds to increased functional variation among sauropods. The reduction in biomechanical disparity following this peak coincides with the J/K extinction, the associated loss of sauropod and stegosaur diversity, and the decline of cycadophytes. We find no specific correspondence between biomechanical disparity and the proliferation of angiosperms. Continual ecological and functional replacement of pre-existing taxa accounts for disparity patterns through much of the Cretaceous, with the exception of several unique groups, such as psittacosaurids that are never replaced in their biomechanical or morphological profiles.

Bone up: craniomandibular development and hard-tissue biomineralization in neonate mice

The presence of regional variation in the osteogenic abilities of cranial bones underscores the fact that the mechanobiology of the mammalian skull is more complex than previously recognized. However, the relationship between patterns of cranial bone formation and biomineralization remains incompletely understood. In four strains of mice, micro-computed tomography was used to measure tissue mineral density during perinatal development in three skull regions (calvarium, basicranium, mandible) noted for variation in loading environment, embryological origin, and ossification mode. Biomineralization levels increased during perinatal ontogeny in the mandible and calvarium, but did not increase in the basicranium. Tissue mineral density levels also varied intracranially, with density in the mandible being highest, in the basicranium intermediate, and in the calvarium lowest. Perinatal increases in, and elevated levels of, mandibular biomineralization appear related to the impending postweaning need to resist elevated masticatory stresses. Similarly, perinatal increases in calvarial biomineralization may be linked to ongoing brain expansion, which is known to stimulate sutural bone formation in this region. The lack of perinatal increase in basicranial biomineralization could be a result of earlier developmental maturity in the cranial base relative to other skull regions due to its role in supporting the brain's mass throughout ontogeny. These results suggest that biomineralization levels and age-related trajectories throughout the skull are influenced by the functional environment and ontogenetic processes affecting each region, e.g., onset of masticatory loads in the mandible, whereas variation in embryology and ossification mode may only have secondary effects on patterns of biomineralization. Knowledge of perinatal variation in tissue mineral density, and of normal cranial bone formation early in development, may benefit clinical therapies aiming to correct developmental defects and traumatic injuries in the skull, and more generally characterize loading environments and skeletal adaptations in mammals by highlighting the need for multi-level analyses for evaluating functional performance of cranial bone.

Human feeding biomechanics: performance, variation, and functional constraints

The evolution of the modern human (Homo sapiens) cranium is characterized by a reduction in the size of the feeding system, including reductions in the size of the facial skeleton, postcanine teeth, and the muscles involved in biting and chewing. The conventional view hypothesizes that gracilization of the human feeding system is related to a shift toward eating foods that were less mechanically challenging to consume and/or foods that were processed using tools before being ingested. This hypothesis predicts that human feeding systems should not be well-configured to produce forceful bites and that the cranium should be structurally weak. An alternate hypothesis, based on the observation that humans have mechanically efficient jaw adductors, states that the modern human face is adapted to generate and withstand high biting forces. We used finite element analysis (FEA) to test two opposing mechanical hypotheses: that compared to our closest living relative, chimpanzees (Pan troglodytes), the modern human craniofacial skeleton is (1) less well configured, or (2) better configured to generate and withstand high magnitude bite forces. We considered intraspecific variation in our examination of human feeding biomechanics by examining a sample of geographically diverse crania that differed notably in shape. We found that our biomechanical models of human crania had broadly similar mechanical behavior despite their shape variation and were, on average, less structurally stiff than the crania of chimpanzees during unilateral biting when loaded with physiologically-scaled muscle loads. Our results also show that modern humans are efficient producers of bite force, consistent with previous analyses. However, highly tensile reaction forces were generated at the working (biting) side jaw joint during unilateral molar bites in which the chewing muscles were recruited with bilateral symmetry. In life, such a configuration would have increased the risk of joint dislocation and constrained the maximum recruitment levels of the masticatory muscles on the balancing (non-biting) side of the head. Our results do not necessarily conflict with the hypothesis that anterior tooth (incisors, canines, premolars) biting could have been selectively important in humans, although the reduced size of the premolars in humans has been shown to increase the risk of tooth crown fracture. We interpret our results to suggest that human craniofacial evolution was probably not driven by selection for high magnitude unilateral biting, and that increased masticatory muscle efficiency in humans is likely to be a secondary byproduct of selection for some function unrelated to forceful biting behaviors. These results are consistent with the hypothesis that a shift to softer foods and/or the innovation of pre-oral food processing techniques relaxed selective pressures maintaining craniofacial features that favor forceful biting and chewing behaviors, leading to the characteristically small and gracile faces of modern humans.

Shifts in subsistence type and its impact on the human skull's morphological integration

OBJECTIVE

Here we evaluate morphological integration patterns and magnitudes in different skull regions to detect if shifts in morphological integration are correlated to the appearance of more processed (softer) diets.

METHODS

To do so, three transitional populations were analyzed, including samples from groups that inhabited the same geographical region and for which the evidence shows that major changes occurred in their subsistence mode. Ninety three-dimensional landmarks were digitized on 357 skulls and used as the raw data to develop geometric morphometric analyses. The landmark coordinates were divided into several different regions of biomechanical interest, following a three-level hierarchically nested scheme: the whole skull, further subdivided into neurocranium (divided into the vault and basicranium), the facial (divided into the lower and upper facial), and the masticatory apparatus (divided into alveolar, temporal, and temporo-mandibular joint).

RESULTS

Our results indicate that the morphological integration and variability patterns significantly vary across skull regions but are maintained across the transitions. The alveolar border and the lower facial are the regions manifesting greater value of morphological integration and variability, while the upper facial, the temporo-mandibular joint, and the basicranium are highly integrated and poorly variable.

CONCLUSIONS

The transition to softer diets increased morphological variation across cranial regions that are more exposed to masticatory strains effects.

A three-dimensional skull ontogeny in the bobcat (Lynx rufus) (Carnivora: Felidae): a comparison with other carnivores

The maturation of mammalian carnivores from a lactating juvenile to a predatory adult requires a suite of changes in both morphology and behaviour. Bobcats (Lynx rufus (Schreber, 1777)) are medium-sized cats with well-developed skulls to process large prey that can exceed their body mass. An integrated view of the skull ontogeny in the bobcat was developed to detect the relationship between shape, size (on the basis of three-dimensional geometric morphometric analysis), and life history. Dietary changes from juvenile to adults were taken into account and compared with other carnivores. Newborns were different from the remaining age stages in the behavioral and morphological characters examined, which allows us to relate them to the terminal morphology reached during the prenatal period. All findings were related to the reinforcement of the skull and the enhancement of predatory skills in adult bobcats. The final cranial shape is reached in A2 age class, after 2 years of age, and once sexual maturity has been reached. This is a pattern not followed for the rest of carnivores previously studied, which might be related to the capacity of subduing prey that exceed them in size, a behavior not common in felids of the body size of bobcats.

What does feeding system morphology tell us about feeding?

Feeding is the set of behaviors whereby organisms acquire and process the energy required for survival and reproduction. Thus, feeding system morphology is presumably subject to selection to maintain or improve feeding performance. Relationships among feeding system morphology, feeding behavior, and diet not only explain the morphological diversity of extant primates, but can also be used to reconstruct feeding behavior and diet in fossil taxa. Dental morphology has long been known to reflect aspects of feeding behavior and diet but strong relationships of craniomandibular morphology to feeding behavior and diet have yet to be defined.

Impact of the terrestrial-aquatic transition on disparity and rates of evolution in the carnivoran skull

Background

Which factors influence the distribution patterns of morphological diversity among clades? The adaptive radiation model predicts that a clade entering new ecological niche will experience high rates of evolution early in its history, followed by a gradual slowing. Here we measure disparity and rates of evolution in Carnivora, specifically focusing on the terrestrial-aquatic transition in Pinnipedia. We analyze fissiped (mostly terrestrial, arboreal, and semi-arboreal, but also including the semi-aquatic otter) and pinniped (secondarily aquatic) carnivorans as a case study of an extreme ecological transition. We used 3D geometric morphometrics to quantify cranial shape in 151 carnivoran specimens (64 fissiped, 87 pinniped) and five exceptionally-preserved fossil pinnipeds, including the stem-pinniped Enaliarctos emlongi. Range-based and variance-based disparity measures were compared between pinnipeds and fissipeds. To distinguish between evolutionary modes, a Brownian motion model was compared to selective regime shifts associated with the terrestrial-aquatic transition and at the base of Pinnipedia. Further, evolutionary patterns were estimated on individual branches using both Ornstein-Uhlenbeck and Independent Evolution models, to examine the origin of pinniped diversity.

Results

Pinnipeds exhibit greater cranial disparity than fissipeds, even though they are less taxonomically diverse and, as a clade nested within fissipeds, phylogenetically younger. Despite this, there is no increase in the rate of morphological evolution at the base of Pinnipedia, as would be predicted by an adaptive radiation model, and a Brownian motion model of evolution is supported. Instead basal pinnipeds populated new areas of morphospace via low to moderate rates of evolution in new directions, followed by later bursts within the crown-group, potentially associated with ecological diversification within the marine realm.

Conclusion

The transition to an aquatic habitat in carnivorans resulted in a shift in cranial morphology without an increase in rate in the stem lineage, contra to the adaptive radiation model. Instead these data suggest a release from evolutionary constraint model, followed by aquatic diversifications within crown families.

Electronic supplementary material

The online version of this article (doi:10.1186/s12862-015-0285-5) contains supplementary material, which is available to authorized users.

The contribution of subsistence to global human cranial variation

Diet-related cranial variation in modern humans is well documented on a regional scale, with ample examples of cranial changes related to the agricultural transition. However, the influence of subsistence strategy on global cranial variation is less clear, having been confirmed only for the mandible, and dietary effects beyond agriculture are often neglected. Here we identify global patterns of subsistence-related human cranial shape variation. We analysed a worldwide sample of 15 populations (n = 255) with known subsistence strategies using 3-D landmark datasets designed to capture the shape of different units of the cranium. Results show significant correlations between global cranial shape and diet, especially for temporalis muscle shape and general cranial shape. Importantly, the differences between populations with either a plant- or an animal-based diet are more pronounced than those between agriculturalists and hunter-gatherers, suggesting that the influence of diet as driver of cranial variation is not limited to Holocene transitions to agricultural subsistence. Dental arch shape did not correlate with subsistence pattern, possibly indicating the high plasticity of this region of the face in relation to age, disease and individual use of the dentition. Our results highlight the importance of subsistence strategy as one of the factors underlying the evolution of human geographic cranial variation.

The feeding biomechanics and dietary ecology of Paranthropus boisei

The African Plio-Pleistocene hominins known as australopiths evolved derived craniodental features frequently interpreted as adaptations for feeding on either hard, or compliant/tough foods. Among australopiths, Paranthropus boisei is the most robust form, exhibiting traits traditionally hypothesized to produce high bite forces efficiently and strengthen the face against feeding stresses. However, recent mechanical analyses imply that P. boisei may not have been an efficient producer of bite force and that robust morphology in primates is not necessarily strong. Here we use an engineering method, finite element analysis, to show that the facial skeleton of P. boisei is structurally strong, exhibits a strain pattern different from that in chimpanzees (Pan troglodytes) and Australopithecus africanus, and efficiently produces high bite force. It has been suggested that P. boisei consumed a diet of compliant/tough foods like grass blades and sedge pith. However, the blunt occlusal topography of this and other species suggests that australopiths are adapted to consume hard foods, perhaps including grass and sedge seeds. A consideration of evolutionary trends in morphology relating to feeding mechanics suggests that food processing behaviors in gracile australopiths evidently were disrupted by environmental change, perhaps contributing to the eventual evolution of Homo and Paranthropus.

Biomechanical implications of intraspecific shape variation in chimpanzee crania: moving toward an integration of geometric morphometrics and finite element analysis

In a broad range of evolutionary studies, an understanding of intraspecific variation is needed in order to contextualize and interpret the meaning of variation between species. However, mechanical analyses of primate crania using experimental or modeling methods typically encounter logistical constraints that force them to rely on data gathered from only one or a few individuals. This results in a lack of knowledge concerning the mechanical significance of intraspecific shape variation that limits our ability to infer the significance of interspecific differences. This study uses geometric morphometric methods (GM) and finite element analysis (FEA) to examine the biomechanical implications of shape variation in chimpanzee crania, thereby providing a comparative context in which to interpret shape-related mechanical variation between hominin species. Six finite element models (FEMs) of chimpanzee crania were constructed from CT scans following shape-space Principal Component Analysis (PCA) of a matrix of 709 Procrustes coordinates (digitized onto 21 specimens) to identify the individuals at the extremes of the first three principal components. The FEMs were assigned the material properties of bone and were loaded and constrained to simulate maximal bites on the P(3) and M(2) . Resulting strains indicate that intraspecific cranial variation in morphology is associated with quantitatively high levels of variation in strain magnitudes, but qualitatively little variation in the distribution of strain concentrations. Thus, interspecific comparisons should include considerations of the spatial patterning of strains rather than focus only on their magnitudes.

New insights into the phenotypic covariance structure of the anthropoid cranium

In complex organisms, suites of non-random, highly intercorrelated phenotypic traits, organized according to their developmental history and forming semi-autonomous units (i.e. modules), have the potential to impose constraints on morphological diversification or to improve evolvability. Because of its structural, developmental and functional complexity, the cranium is arguably one of the best models for studying the interplay between developmental history and the need for various parts of a structure to specialize in different functions. This study evaluated the significance of two specific types of developmental imprints in the adult anthropoid cranium, those imposed by ossification pattern (i.e. ossification with and without a pre-existing cartilaginous phase) and those imposed by tissue origin (i.e. tissues derived principally from neural-crest vs. those derived from paraxial mesoderm). Specifically, this study tests the hypothesis that the face and the basicranium form two distinct modules with higher within-unit trait integration magnitudes compared with the cranium as a whole. Data on 12 anthropoid primate species were collected in the form of 20 three-dimensional landmarks digitized on cranial surface models that sample the basicranium as well as regions of functional importance during feeding [corrected]. The presence of a significant modularity imprint in the adult cranium was assessed using a between-region within-species comparison of multivariate correlations (RV coefficients) obtained with partial least-squares, using within-module within-species eigenvalue variance (EV), and using cluster analyses and non-metric multidimensional scaling. In addition to addressing the validity of the cranial modularity hypothesis in anthropoids, this study addressed methodological aspects of the interspecific comparison of morphological integration, namely the effect of sample size and the effect of landmark number on integration magnitudes. Two methodological findings that are of significance to research in morphological integration are that: (i) a smaller sample size increases integration magnitude, but preserves the pattern of variation of integration magnitudes from block to block within species; and that (ii) the number of landmarks per cranial block does not significantly impact block integration magnitude measured as EV. Results from the analyses testing for cranial modularity imprints in the adult anthropoid cranium show that some facial landmarks covary more strongly with basicranial landmarks than with other facial landmarks. Cluster methods, non-metric multidimensional scaling and, to an extent, RV results show that the rostral and the zygomatic landmarks covary more strongly with the basicranial landmarks than they do with the molar landmarks. However, the rostral-zygomatic-basicranial block, the molar block, the facial block, the basicranial block and the other analyzed cranial and facial blocks are not more integrated than the cranium. Thus, the morphological variation in the adult anthropoid cranium is not significantly constrained by at least two of the potential developmental sources of its covariance structure.

Photoelastic and finite element analyses of occlusal loads in mandibular body

This study proposed to evaluate the mandibular biomechanics in the posterior dentition based on experimental and computational analyses. The analyses were performed on a model of human mandible, which was modeled by epoxy resin for photoelastic analysis and by computer-aided design for finite element analysis. To standardize the evaluation, specific areas were determined at the lateral surface of mandibular body. The photoelastic analysis was configured through a vertical load on the first upper molar and fixed support at the ramus of mandible. The same configuration was used in the computer simulation. Force magnitudes of 50, 100, 150, and 200 N were applied to evaluate the bone stress. The stress results presented similar distribution in both analyses, with the more intense stress being at retromolar area and oblique line and alveolar process at molar level. This study presented the similarity of results in the experimental and computational analyses and, thus, showed the high importance of morphology biomechanical characterization at posterior dentition.

Morphological relationship between the cranial and supraorbital regions in Homo sapiens

Although some hypotheses that attempt to explain the variation in supraorbital region morphology in modern humans have been proposed, this issue is still not well understood. In this study, the craniofacial size and spatial models were tested using a sample of modern human crania from geographically diverse populations, and the co-occurrence of the degrees of glabella (GL) and superciliary arch (ST) expression were analyzed. The two supraorbital structures were examined by visual assessment, and eight quantitative variables were included in the three-way ANOVA, canonical variates analysis and partial rank correlation. The influences of sex and the region of origin of the cranial samples on the relationships between the examined variables and the degrees of supraorbital structures expression were also considered. The results only partially supported the craniofacial size and spatial models and suggested that GL and ST experienced separate influences during development. In the sample of all crania, the neurocranial size more strongly influenced the morphological variation of the ST than of the GL, and sex influenced both of these structures the most. The results suggest that sex may be the main factor (having an influence independent of the other traits) on the morphological variation of the GL and ST.

Protective buttressing of the hominin face

When humans fight hand-to-hand the face is usually the primary target and the bones that suffer the highest rates of fracture are the parts of the skull that exhibit the greatest increase in robusticity during the evolution of basal hominins. These bones are also the most sexually dimorphic parts of the skull in both australopiths and humans. In this review, we suggest that many of the facial features that characterize early hominins evolved to protect the face from injury during fighting with fists. Specifically, the trend towards a more orthognathic face; the bunodont form and expansion of the postcanine teeth; the increased robusticity of the orbit; the increased robusticity of the masticatory system, including the mandibular corpus and condyle, zygoma, and anterior pillars of the maxilla; and the enlarged jaw adductor musculature are traits that may represent protective buttressing of the face. If the protective buttressing hypothesis is correct, the primary differences in the face of robust versus gracile australopiths may be more a function of differences in mating system than differences in diet as is generally assumed. In this scenario, the evolution of reduced facial robusticity in Homo is associated with the evolution of reduced strength of the upper body and, therefore, with reduced striking power. The protective buttressing hypothesis provides a functional explanation for the puzzling observation that although humans do not fight by biting our species exhibits pronounced sexual dimorphism in the strength and power of the jaw and neck musculature. The protective buttressing hypothesis is also consistent with observations that modern humans can accurately assess a male's strength and fighting ability from facial shape and voice quality.

In vivo cranial bone strain and bite force in the agamid lizard Uromastyx geyri

In vivo bone strain data are the most direct evidence of deformation and strain regimes in the vertebrate cranium during feeding and can provide important insights into skull morphology. Strain data have been collected during feeding across a wide range of mammals; in contrast, in vivo cranial bone strain data have been collected from few sauropsid taxa. Here we present bone strain data recorded from the jugal of the herbivorous agamid lizard Uromastyx geyri along with simultaneously recorded bite force. Principal and shear strain magnitudes in Uromastyx geyri were lower than cranial bone strains recorded in Alligator mississippiensis, but higher than those reported from herbivorous mammals. Our results suggest that variations in principal strain orientations in the facial skeleton are largely due to differences in feeding behavior and bite location, whereas food type has little impact on strain orientations. Furthermore, mean principal strain orientations differ between male and female Uromastyx during feeding, potentially because of sexual dimorphism in skull morphology.