Construction of Mn-Defective S/Mn0.4Cd0.6S for Promoting Photocatalytic N2 Reduction

Improving catalytic performance by controlling the microstructure of materials has become a hot topic in the field of photocatalysis, such as the surface defect site, multistage layered morphology, and exposed crystal surface. Due to the differences in the metal atomic radius (Mn and Cd) and solubility product constant (MnS and CdS), Mn defect easily occurred in the S/Mn0.4Cd0.6S (S/0.4MCS) composite. To optimize the photocatalytic performance in N2 fixation, the effects of the synthesis conditions and reaction conditions for S/0.4MCS were explored and systematically studied. Combined with the experimental characterization and theoretical calculation, not only the photocatalytic reaction pathway but also the key steps of N2 reduction were explored. Moreover, the transfer mechanism of photogenerated charge carriers (PCCs) formed between S and 0.4MCS was studied, which enhanced the utilization rate of photogenerated electrons (e-) and holes (h+). This work detailedly discusses the relationship between microstructure and photocatalytic performance, which is beneficial for the design of efficient photocatalyst.

Blacking any Material Surface by Amyloid-Fortified Carbon Coating Toward High-Performance Large-Scale Solar Steam Generation System

Enhancing the interfacial adhesion between carbon-based coatings and substrates through a simple method remains a challenge, mainly due to the intrinsic chemical inertness of carbon materials. Herein, a carbon nanosphere-based coating utilizing an amyloid-like protein aggregation strategy is developed, involving only the reaction of protein, reductant, and carbon nanospheres in an aqueous solution at room temperature. The resultant coating, enriched in amyloid-like protein structures, features both robust interfacial adhesion and high light absorption (≈98.5%) covering the entire UV/Vis to NIR regions. Adhesion energy between the coating and the glass exceeds 5436 J m-2, which is at least five times higher than those polymer-reinforced carbon-based coatings. Combining the strong adhesion and excellent photothermal conversion performance of this coating, a solar steam generation system is constructed with a water treatment capacity of 13.01 kg m-2 d-1, which is sufficient to provide daily supply for tens of people. Importantly, the photothermal conversion unit can be repeatedly cleaned and rolled up for storage, which is beneficial for the construction of portable devices. This work provides a facile and valuable method for preparing carbon-based coatings with strong interfacial adhesion, exhibiting great promise in energy conversion and storage, flexible wearable sensors, photothermal therapy, and so on.

Integrating Ni(OH)2 Nanoparticles on CdS for Efficient Noble-Metal-Free Photocatalytic H2 Evolution

Photocatalytic hydrogen evolution using inexhaustible clean solar energy is considered as a promising strategy. In order to build an efficient photocatalytic hydrogen production system to satisfy the demands of practical applications, it is of great significance to design photocatalysts that offer high activity, low cost, and high stability. Herein, a series of cheap CdS/Ni(OH)2 composite photocatalysts were designed and synthesized using the hydrothermal method. The introduction of a Ni(OH)2 cocatalyst multiplied the reactive active site of cadmium sulfide and promoted the transfer of photoinduced electrons in a semiconductor. Therefore, CdS/Ni(OH)2 composites demonstrate significantly better photocatalytic performance, and the hydrogen production rate of an optimal CdS/5%Ni(OH)2 composite is 6.9 times higher than that of blank CdS. Furthermore, the stability test also showed that CdS/Ni(OH)2 had good stability. This study aims to serve as a rewarding reference for the development of high-performance composite photocatalysts.

Construction of S-scheme heterojunction via coating ZIF-8-derived Zn0.7Cd0.3S on Ni2P hydrangea for efficient photocatalytic hydrogen evolution coupled with benzyl alcohol oxidation

Coupling light-driven hydrogen (H2) evolution with benzyl alcohol (BA) oxidation is regard as a prospective strategy for obtaining value-added fuels as well as chemicals to deal with energy and environment crisis. In this contribution, a series of dual-functional noble metal-free S-scheme heterojunctions (Zn1-xCdxS@yNi2P) with spatially separated and precise redox sites were constructed by synthesizing Zn1-xCdxS with regular morphology uniformly coated on Ni2P nanosheets via the template method for coupling H2 evolution with BA oxidation. The optimized Zn0.7Cd0.3S@15 %Ni2P photocatalytic produced H2 (40.33 mmol g-1 h-1) and benzaldehyde (BAD) (43.38 mmol g-1 h-1), remarkably exceeding pure Ni2P and Zn0.7Cd0.3S. Notably, the Zn0.7Cd0.3S@15 %Ni2P gave a significant advantage in coupling H2 evolution and BA oxidation performance than the catalysts reported previously. The S-scheme heterojunction constructed between Zn0.7Cd0.3S and Ni2P was demonstrated by Density functional theory (DFT) calculations, in-situ radiation X-ray photoelectron spectroscopy (XPS), Kelvin probe force microscope (KPFM) and electron paramagnetic resonance (EPR). The effect of S-scheme heterointerfaces and internal electric field promoted photo-induced charge separation and transfer efficiency, greatly enhancing the photocatalysis performance. This work emphasizes the significance of rational engineering of heterojunctions, providing an enlightening guidance on synthesis of dual-functional photo-redox catalysts to improve economical solar fuel exploitation and production of value-added chemicals.

Facile Construction Engineering of Pr6O11@C with Efficient Photocatalytic Activity

In this study, facile construction engineering of Pr6O11@C with efficient photocatalytic activity was established. Taking advantage of the flocculation of Pr3+ in the base medium, acid red 14 (AR14) was flocculated together with Pr(OH)3 precipitate, in which Pr(OH)3 and AR14 mixed highly uniformly. Calcinated at high temperature in N2, a novel Pr6O11@C was successfully synthesized. The resulting materials were characterized by XRD, SEM, FT-IR, Raman, and XPS techniques. The results show that the cubic Pr6O11@C with Fm3m space group, similar to that of Pr6O11, was obtained. From the results of the photodegradation of AR14, it is found that the photocatalytic efficiency of Pr6O11@C is higher than that of pure Pr6O11 due to the formation of abundant carbon bonds and oxygen vacancies. Compared with pure Pr6O11 and other carbon-based composites, the acid resistance of Pr6O11@C is greatly improved due to the highly uniform dispersion of Pr6O11 and C, which lays a solid foundation for the practical application of Pr6O11@C. Moreover, the role of NH3·H2O and NaOH used as precipitants for the photocatalytic efficiency of Pr6O11 was investigated in detail.

Aluminum-Porphyrin Metal-Organic Frameworks for Visible-Light Photocatalytic and Sonophotocatalytic Cr(VI) Reduction

In this study, four isostructural aluminum-based porphyrin metal-organic frameworks [Al-TCPP(M), M = H2 and Zn] with different morphologies and sizes were synthesized by the hydrothermal method. By adjusting the hydrothermal reaction time and the types of porphyrin ligands, Al-TCPP(M) MOFs exhibited diverse morphologies including tetragonal, rectangular, and carambola-like phase. In view of the introduction of porphyrin ligands and the strong coordination effect of Al-O units, Al-TCPP(M) MOFs exhibited good chemical stability, broad visible light harvesting capability, and fast photogenerated charge response. Four Al-TCPP(M) MOFs exhibited excellent photocatalytic activities for Cr(VI) in aqueous solution. Notably, the regulation to the nanoscale carambola-like morphology of Al-TCPP MOFs and metallization of the porphyrin ligand promoted the Cr(VI) photoreduction reaction where the catalytic activity of metallic carambola-like Al-TCPP increased 1.7 times compared to that of nonmetallic tetragonal MOFs. With the assistance of sonophotocatalysis, the Cr(VI) average reduction rates reached 0.658, 0.542, 0.785, and 0.629 mg·L-1·min-1 for Al-TCPP(H2)-24h, Al-TCPP(H2)-72h, Al-TCPP(Zn)-24h, and Al-TCPP(Zn)-72h, which are 1.2-1.4 times higher than that of photocatalysis. UV-vis absorption spectroscopy, electronic spin resonance, and fluorescence spectroscopy experiments demonstrated that the synergistic effect of photochemistry and sonochemistry promoted the transfer of photogenerated electrons from Al-TCPP(M) to Cr(VI), thus enhancing the catalytic activity. The combination of the sonophotocatalytic technology with aluminum-porphyrin MOFs may become an effective strategy to improve MOF-based photocatalytic systems.

Graphene-based photocatalysts for degradation of organic pollution

Compared with the traditional wastewater treatment technology, semiconductor photocatalysis is a rapidly emerging environment-friendly and efficient Advanced Oxidation Process for degradation of refractory organic contaminants. Single-component semiconductor photocatalysts exhibit poor photocatalytic performance and cannot meet the requirements of wastewater treatment. The combination of semiconductor photocatalysts and Graphene can effectively improve the photocatalytic activity and stability of semiconductor photocatalysts. This review focuses on the synergistic effect of several types of semiconductors with Graphene for photocatalytic degradation of organic pollutants. After a brief introduction of the photodegradation mechanism of semiconductor materials and the basic description of Graphene, the synthesis, characterization and degradation performance of various Graphene-based semiconductor photocatalysts are emphatically introduced.

Inspired by game theory: Multi-signal output photoelectrochemical point-of-care immunoassay based on target-triggered organic electronic barriers

This work presents an integrated photoelectrochemical, impedance and colorimetric biosensing platform for flexible detection of cancer markers based on the targeted response by combining liposome amplification strategies and target-induced non-in situ formation of electronic barriers as the signal transduction modality on carbon-modified CdS photoanodes. Inspired by game theory, the carbon layer modified CdS hyperbranched structure with low impedance and high photocurrent response was firstly obtained by surface modification of CdS nanomaterials. Through a liposome-mediated enzymatic reaction amplification strategy, a large number of organic electron barriers were formed by a biocatalytic precipitation (BCP) reaction triggered by horseradish peroxidase released from cleaved liposomes after the introduction of the target molecule, thereby increasing the impedance characteristics of the photoanode as well as attenuating the photocurrent. The BCP reaction in the microplate was accompanied by a significant color change, which opened up a new window for point-of-care testing. Taking carcinoembryonic antigen (CEA) as a proof of concept, the multi-signal output sensing platform showed a satisfactory sensitive response to CEA with an optimal linear range of 20 pg mL^-1-100 ng mL^-1. The detection limit was as low as 8.4 pg mL^-1. Meanwhile, with the assistance of a portable smartphone and a miniature electrochemical workstation, the electrical signal obtained was synchronized with the colorimetric signal to correct the actual target concentration in the sample, further reducing the occurrence of false reports. Importantly, this protocol provides a new idea for the sensitive detection of cancer markers and the construction of a multi-signal output platform.

Enzyme-catalyzed high-performing reaction with in-situ amplified photocurrent on carbon-functionalized inorganic photoanode for immunosensing

An enzyme-catalyzed high-performing reaction with in-situ amplified photocurrent was innovatively designed for the quantitative screening of carcinoembryonic antigen (CEA) in biological fluids by coupling with carbon-functionalized inorganic photoanode. A split-type photoelectrochemical (PEC) immunoassay was initially executed with horseradish peroxidase (HRP)-labeled secondary antibody on the capture antibody-coated microtiter. Then, the photocurrent of carbon-functionalized inorganic photoanode were improved through enzymatic insoluble product. Experimental results revealed that introduction of the outer carbon layer on the inorganic photoactive materials caused the amplifying photocurrent because of the improving light harvesting and separation of photo-generated e^-/h⁺ pairs. Under optimum conditions, the split-type photoelectrochemical immunosensing platform displayed good photocurrent responses within the dynamic range of 0.01 - 80 ng mL^-1 CEA, and allowed the detection of CEA as low as a concentration of 3.6 pg mL^-1 at the 3S_blank level. The strong attachment of antibodies onto nano label and high-performing photoanode resulted in a good repeatability and intermediate precision down to 9.83%. No significant differences at the 0.05 significance level were encountered in the analysis of six human serum specimens between the developed PEC immunoassay and the commercially available CEA ELISA kits.

Engineered Cobalt Single-Atoms@BiFeO3 Heteronanostructures for Highly Efficient Solar Water Oxidation

Efficient charge-carrier separation and their utilization are the key factors in overcoming sluggish four-electron reaction kinetics involved in photocatalytic oxygen evolution. Here, a novel study demonstrates the significance of Na₂ S₂ O₈ as a sacrificial agent in comparison to AgNO₃ . Resultantly, BiFeO₃ (BFO) and titanium doped-oxygen deficient BiFeO₃ (Ti-BFO-R) nanostructures achieve ≈64 and 44.5 times higher O₂ evolution in the presence of Na₂ S₂ O₈ compared to AgNO₃ as a sacrificial agent, respectively. Furthermore, the presence of Co single atoms (Co-SAs) deposited via immersion method on BFO and Ti-BFO-R nanostructures led to achieving outstanding O₂ evolution at a rate of 16.11 and 23.89 mmol g^-1 h^-1 , respectively, which is 153 and 227.5 times higher compared to BFO (in the presence of AgNO₃ ), the highest O₂ evolution observed for BFO-based materials to date. The successful deposition of Co-SAs is confirmed by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (AC HAADF-STEM) and X-ray absorption near-edge structure (XANES). The charge transfer investigations confirm the significance of Co-SAs on BFO-based photocatalysts for improved charge-carrier separation, transport, and utilization. This novel study validates the excellent role of Na₂ S₂ O₈ as a sacrificial agent and Co-SAs as a cocatalyst for BFO-based nanostructures for efficient O₂ evolution.

Radial Nano-Heterojunctions Consisting of CdS Nanorods Wrapped by 2D CN:PDI Polymer with Deep HOMO for Photo-Oxidative Water Splitting, Dye Degradation and Alcohol Oxidation

Solar energy harvesting using semiconductor photocatalysis offers an enticing solution to two of the biggest societal challenges, energy scarcity and environmental pollution. After decades of effort, no photocatalyst exists which can simultaneously meet the demand for excellent absorption, high quantum efficiency and photochemical resilience/durability. While CdS is an excellent photocatalyst for hydrogen evolution, pollutant degradation and organic synthesis, photocorrosion of CdS leads to the deactivation of the catalyst. Surface passivation of CdS with 2D graphitic carbon nitrides (CN) such as g-C₃N₄ and C₃N₅ has been shown to mitigate the photocorrosion problem but the poor oxidizing power of photogenerated holes in CN limits the utility of this approach for photooxidation reactions. We report the synthesis of exfoliated 2D nanosheets of a modified carbon nitride constituted of tris-s-triazine (C₆N₇) linked pyromellitic dianhydride polydiimide (CN:PDI) with a deep oxidative highest occupied molecular orbital (HOMO) position, which ensures sufficient oxidizing power for photogenerated holes in CN. The heterojunction formed by the wrapping of mono-/few layered CN:PDI on CdS nanorods (CdS/CN:PDI) was determined to be an excellent photocatalyst for oxidation reactions including photoelectrochemical water splitting, dye decolorization and the photocatalytic conversion of benzyl alcohol to benzaldehyde. Extensive structural characterization using HR-TEM, Raman, XPS, etc., confirmed wrapping of few-layered CN:PDI on CdS nanorods. The increased photoactivity in CdS/CN:PDI catalyst was ascribed to facile electron transfer from CdS to CN:PDI in comparison to CdS/g-C₃N₄, leading to an increased electron density on the surface of the photocatalyst to drive chemical reactions.

Dual cocatalysts and vacancy strategies for enhancing photocatalytic hydrogen production activity of Zn3In2S6 nanosheets with an apparent quantum efficiency of 66.20

Converting solar energy into hydrogen energy is a feasible means to solve the current energy crisis. However, developing an excellent photocatalyst with high light utilization and stability for hydrogen production remains a great challenge. In this work, CoS₂ nanoparticles as cocatalysts are growth on Zn₃In₂S₆ nanosheets with abundant sulfur vacancies for hydrogen evolution, and the optimal rate of hydrogen evolution is as high as 5.69 mmol h^-1 g^-1 in the absence of noble metal co-catalyst Pt, which is 2.87 and 2.29 times that of CoS₂/Zn₃In₂S₆ (with few sulfur vacancies) and Zn₃In₂S₆ (with rich sulfur vacancies). In addition, the hydrogen production rate of CoS₂/Zn₃In₂S₆ composite (with rich sulfur vacancies and 1 wt% Pt) is 24.17 mmol h^-1 g^-1, which is 4.25 and 1.90 times that of CoS₂/Zn₃In₂S₆ (with rich sulfur vacancies) and 1%-Pt/Zn₃In₂S₆ (with rich sulfur vacancies), respectively. The apparent quantum efficiency (AQE) of CoS₂/Zn₃In₂S₆ composite (with rich sulfur vacancies and 1 wt% Pt) reaches 66.20% under light irradiation at the wavelength of 370 nm. Above all indicate that dual cocatalysts (CoS₂ and Pt) and sulfur vacancies can promote the efficient hydrogen evolution activity of Zn₃In₂S₆ nanosheets. This work will provide new ideas and insights for the development of photocatalytic hydrogen production technology.

ZIF-8 metal organic framework composites as hydrogen evolution reaction photocatalyst: A review of the current state

In the past decade, extensive research has been devoted to synthesis of ZIF-8 materials for catalytic applications. As physico-chemical properties are synthesis-dependent, this review explores different synthesis strategies based the solvent and solvent-free synthesis of zeolitic imidazole framework. Accordingly, the effect of several parameters on the ZIF-8 synthesis were discussed including solvent, deprotonating agents, precursors ratio is delivered. Additionally, the advantages and disadvantages of each synthesis have been discussed and assessed. ZIF-8 textural and structural properties justify its wide use as a stable high surface area MOF in aqueous catalytic reactions. This review includes the applicatios of ZIF-8 materials in photocatalytic hydrogen evolution reaction (HER). The efficiency of the reviewed materials was fairly assessed. Finally, Limitations, drawbacks and future challenges were fully debated to ensure the industrial viability of the ZIFs.

Carbon Layer Formation on Hexagonal Boron Nitride by Plasma Processing in Hydroquinone Aqueous Solution

Although hexagonal boron nitride (hBN) is a thermally conductive and electrically insulating filler in composite materials, surface modification remains difficult, which limits its dispersibility and functionalization. In this study, carbon layer formation on hBN particles by plasma processing in hydroquinone aqueous solution was investigated as a surface modification technique. Carbon components with features of polymeric hydrogenated amorphous carbon were found to be uniformly distributed on the hydroquinone-aided plasma-modified hBN (HQpBN) particles. Electron spin resonance measurements revealed abundant unpaired electrons in HQpBN, indicating that defects were formed on hBN by plasma processing and that the carbon layer contained dangling bonds. The defects on hBN could help in the attachment of the carbon layer, whereas the dangling bonds could act as reactive sites for further functionalization. The carbon layer on HQpBN was successfully functionalized with isocyanate groups, thus confirming the ability of this carbon layer to facilitate surface modification. These results demonstrate that the carbon layer formed on hBN can provide a designable interface in organic/inorganic composite materials.

Enhanced photodegradation of methylene blue from aqueous solution using Al-doped ZnS nanoparticles

The post-transition semiconducting material of pure zinc sulfide (ZnS) and various concentrations of aluminum (Al) (2.5 wt%, 5.0% wt, 7.5 wt%, and 10% calcined at 200 °C) doped ZnS nanoparticles (NPs) were synthesized by sol-gel procedure. The crystal-like nature and phase structure of the product were examined by powder XRD analysis. This analysis shows that the pure ZnS nanoparticle does not form any secondary phase. The functional group of synthesized materials was analyzed by FTIR examination. The energy gap of the materials is calculated using electro-optic analysis and the Kubelka-Munk equation varies from 3.04 nm to 3.63 nm. The photoluminescence studies show the wide emissions (blue to green) for pure ZnS and Al-doped ZnS nanomaterials. The SEM images show the spherical structure and the agglomerated nanostructures. The presence of Zn, S, and Al are confirmed by EDAX spectra. From HR-TEM studies, pure ZnS and Al-doped ZnS nanoparticles exhibit uniform particle sizes. The rate of degradation was observed using MB dye. MB dye has maximum wavelength (λ_max) of 664 nm. The dye degradation efficiency was improved as the dye ratio increased. Photocatalytic activities studies show the intensity of photocatalytic activities decreased for the maximum time interval. Doping of Al in ZnS boosts the photocatalytic activity. Hence, Al-doped ZnS appears to be better decomposing MB dye when exposed to visible light.

Preparation of P-doped CdS nanorods as an efficient photocatalyst for the degradation of the emerging pollutant tetracycline antibiotic under blue LED light irradiation

Excessive drug usage and sewage discharges containing antibiotics have caused water contamination due to the rapid growth of pharmaceutical industries. Tetracycline (TC) is one of the most frequently applied antibiotics having a significant impact on the aquatic environment, water quality and human health and thus effective approaches for TC removal from water are urgently needed. Here, we have fabricated P-doped CdS (CdS-P_0.8) nanorods (NRs) by one-step thermal phosphorization treatment for TC degradation through photocatalytic reaction in the presence of blue and white LED light irradiation. Synthesized photocatalysts were characterized to authenticate the incorporation of P atoms on the CdS NR surface using XPS, XRD, ICP-OES and EDX mapping analyses. CdS-P_0.8 NRs have greater photocatalytic activity for tetracycline degradation under blue LED light irradiation. TC degradation on CdS-P_0.8 NRs followed pseudo-first order kinetics for both LED light sources. In the presence of blue LED light at an intensity of 10 mW cm^-2, TC degradation efficiency and pseudo-first order rate constants of CdS-P_0.8 NRs for the photocatalytic degradation reaction reached 95.4% and 0.13396 min^-1 in 20 minutes without any supplemental oxygen sources. Scavenging experiments demonstrate that reactive oxygen species are produced during the photocatalytic degradation of tetracycline. As a result, due to the extensive utilization of photogenerated oxidative species such as h⁺, O₂˙^- and OH˙, CdS-P_0.8 NRs demonstrated high photocatalytic tetracycline degradation efficiency in 20 minutes. Our findings shed more light on nonmetal P doping on CdS materials and other semiconductors, exploring new possibilities for photocatalytic degradation to efficiently reduce the amount and toxicity of TC antibiotics in wastewater.

Carbon dots decorated cadmium sulphide heterojunction-nanospheres for the enhanced visible light driven photocatalytic dye degradation and hydrogen generation

Carbon dots (C-dots) developed from beetroot is used for the rational design of cadmium sulphide based heterojunction photocatalysts (C-dots@CdS) using hydrothermal technique. The crystal structure, phase, morphology and optical characteristics of the synthesised materials are determined using X-ray diffraction (XRD), High resolution transmission electron microscopy (HR-TEM), Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, UV-Visible diffuse reflectance spectroscopy (UV-DRS), photoluminescence spectroscopy (PL spectroscopy), BET adsorption, X-ray photoelectron spectroscopy (XPS) and electrochemical studies. Using C-dots@CdS catalytic system, a superior photocatalytic activity relative to the undecorated CdS is observed. Among the C-dots@CdS samples, the CdS loaded with 6 wt% of C-dots exhibited enhanced hydrogen evolution rate compared with other samples considered for the study. CdS nanospheres modified with C-dots (6 wt%) resulted in the photocatalytic hydrogen evolution rate of 1582 µmolg^-1 against 849 µmolg^-1 evolution rate obtained for CdS nanospheres within 3 h. In spite of being 0D/0D type nano-heteroarchitecture, C-dots@CdS system obtained an apparent quantum yield of 6.37 % for the catalytic dosage of 20 mg under the irradiation of visible light. CdS in the C-dots@CdS system serves as the light harvester while C-dots with discernible edges can maintain the continuous supply of photo-excited charge carriers and hence can reduce the charge-carrier recombination. Further, the photodegradation of crystal violet dye using the optimised dosage of C-dots@CdS-6 exhibited an efficiency of 97.3 % in 120 min of visible light irradiation under neutral conditions. The detailed kinetic study reveals that the mechanism of photodegradation of crystal violet dye using C-dots@CdS system can be described using pseudo-second-order kinetics. The presence of oxygen rich hydrophilic surface functionalities of C-dots, the formation of near-surface heterojunction and the suitable band structure of C-dots@CdS system leading to the optimum charge carrier separation kinetics can be attributed to the enhanced photocatalytic performance. This work offers a promising strategy to develop bio-derived C-dots based heterojunction photocatalyst to address the burgeoning energy and environmental demands.

One-Step construction of Polyimide/NH2-UiO-66 heterojunction for enhanced photocatalytic degradation of sulfonamides

Photocatalysis treatment is a promising technology to eliminate water pollutants. Herein, we constructed polyimide/NH₂-UiO-66 composites (PUs) through a facile one-step solvothermal method for the photocatalytic degradation of sulfonamides. The optimized photocatalyst PU1.5 was superior to the photocatalysts prepared through multi-step methods due to the more exposed (001) facets of polyimide and the better distribution of small NH₂-UiO-66 particles. PU1.5 showed the highest photocatalytic activity, which was 9.5 and 92.0 times higher than that of polyimide and NH₂-UiO-66. Such improvement was attributed to the improved carrier separation efficiency resulted from direct Z-scheme heterojunction. The probable degradation pathway of sulfathiazole was proposed by the LC-MS/MS and Density Functional Theory (DFT) calculation. Furthermore, the reduced toxicity and the little antibacterial activity of intermediates was investigated by the Quantitative Structure-Activity Relationship (QSAR) analysis and the residual antibiotic activity experiment. The study might provide a new strategy for designing composite photocatalyst to achieve efficient removal of pollutants.

A signal-off photoelectrochemical aptasensor for ultrasensitive 17β-estradiol detection based on rose-like CdS@C nanostructure and enzymatic amplification

Carbon-coated cadmium sulfide rose-like nanostructures (CdS@C NRs) were prepared via a facile solvothermal approach and used as the photoelectrochemical (PEC) sensing platform for the integration of functional biomolecules. Based on this, a novel "signal-off" PEC aptasensor mediated by enzymatic amplification was proposed for the sensitive and selective detection of 17β-estradiol (E2). In the presence of E2, alkaline phosphatase-modified aptamer (ALP-apta) were released from the electrode surface through the specific recognition with E2, which caused the negative effect on PEC response due to the decrease of ascorbic acid (AA) produced by the ALP in situ enzymatic catalysis. The developed PEC aptasensor for detection of E2 exhibited a wide linear range of 1.0-250 nM, with the low detection limit of 0.37 nM. This work provides novel insight into the design of potential phoelectroactive materials and the application of signal amplification strategy in environmental analysis field.

Modulation of the photocatalytic activity and crystallinity of F-TiO2 nanoparticles by using green natural carboxylic acids

Ultrareactive F-doped mesoporous TiO2 nanoparticles with potential environmental applications have been synthesized using green natural carboxylic acids.

MOF-derived sulfur vacancies rich CdS nanoparticles in situ growth on 2D polymer for highly efficient photocatalytic hydrogen generation

For heterojunction photocatalytic materials, the size of nanoparticles and electron-hole separation efficiency have a great influence on the photocatalytic hydrogen production activity. In this work, for the first time, a...

Visible-light-driven sonophotocatalysis for enhanced Cr(VI) reduction based on mixed-linker zirconium-porphyrin MOFs

In this study, we synthesized and characterized two mixed-linker zirconium-porphyrin metal-organic frameworks, PCN-134 and PCN-138 which constructed from tetratopic light harvesting TCPP ligand and tritopic BTB/TBTB ligand (TCPP = trakis(4-carboxyphenyl)porphyrin),...

Hierarchical MXene/transition metal chalcogenide heterostructures for electrochemical energy storage and conversion

MXenes have gained rapidly increasing attention owing to their two-dimensional (2D) layered structures and unique mechanical and physicochemical properties. However, MXenes have some intrinsic limitations (e.g., the restacking tendency of the 2D structure) that hinder their practical applications. Transition metal chalcogenide (TMC) materials such as SnS, NiS, MoS₂, FeS₂, and NiSe₂ have attracted much interest for energy storage and conversion by virture of their earth-abundance, low costs, moderate overpotentials, and unique layered structures. Nonetheless, the intrinsic poor electronic conductivity and huge volume change of TMC materials during the alkali metal-ion intercalation/deintercalation process cause fast capacity fading and poor-rate and poor-cycling performances. Constructing heterostructures based on metallic conductive MXenes and highly electrochemically active TMCs is a promising and effective strategy to solve these problems and enhance the electrochemical performances. This review highlights and discusses the recent research development of MXenes and hierarchical MXene/TMC heterostructures, with a focus on the synthesis strategies, surface/heterointerface engineering, and potential applications for lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, supercapacitors, electrocatalysis, and photocatalysis. The critical challenges and perspectives of the future development of MXenes and hierarchical MXene/TMC heterostructures for electrochemical energy storage and conversion are forecasted.

Fluorescence Quenching by Förster Resonance Energy Transfer in Carbon-Cadmium Sulfide Core-Shell Quantum Dots

Carbon quantum dots (QDs) are an active subject of research in many areas of science and engineering for various applications. The present work reports the first occurrence of a carbon-cadmium sulfide core-shell QD prepared by an extremely simplified wet chemical approach where the CdS shell plays the role of a fluorescence quencher to the carbon core. The quenching effect was confirmed by fluorescence spectroscopy (steady-state and lifetime). These QDs stand as a potential candidate for sensing and imaging applications.

A first-principles study of two-dimensional NbSe2H/g-ZnO van der Waals heterostructures as a water splitting photocatalyst

Based on first-principles calculations, we propose a new two-dimensional (2D) van der Waals (vdW) heterostructure that can be used as a photocatalyst for water splitting. The heterostructure consists of vertically stacked 2D NbSe₂H and graphene-like ZnO (g-ZnO). Depending on the stacking orders, we identified two configurations that have high binding energies with an energy band gap of >2.6 eV. These 2D systems form a type-II heterostructure which enables the separation of photoexcited electrons and holes. The presence of a strong electrostatic potential difference across the 2D NbSe₂H and g-ZnO interface is expected to suppress the electron-hole recombination leading to an enhancement in the efficiency of the photocatalytic activity. Our study also shows that the 2D NbSe₂H/g-ZnO vdW heterostructure has good thermodynamic properties for water splitting. Furthermore, the optical absorption of the 2D NbSe₂H/g-ZnO vdW heterostructure extends into the visible light region. Our results suggest that the 2D NbSe₂H/g-ZnO vdW heterostructure is a promising photocatalytic material for water splitting.

ZnIn2 S4 -Based Photocatalysts for Energy and Environmental Applications

As a fascinating visible-light-responsive photocatalyst, zinc indium sulfide (ZnIn₂ S₄ ) has attracted extensive interdisciplinary interest and is expected to become a new research hotspot in the near future, due to its nontoxicity, suitable band gap, high physicochemical stability and durability, ease of synthesis, and appealing catalytic activity. This review provides an overview on the recent advances in ZnIn₂ S₄ -based photocatalysts. First, the crystal structures and band structures of ZnIn₂ S₄ are briefly introduced. Then, various modulation strategies of ZnIn₂ S₄ are outlined for better photocatalytic performance, which includes morphology and structure engineering, vacancy engineering, doping engineering, hydrogenation engineering, and the construction of ZnIn₂ S₄ -based composites. Thereafter, the potential applications in the energy and environmental area of ZnIn₂ S₄ -based photocatalysts are summarized. Finally, some personal perspectives about the promises and prospects of this emerging material are provided.

Efficient Reduction of Selenite to Elemental Selenium by Liquid-Phase Catalytic Hydrogenation Using a Highly Stable Multiwalled Carbon Nanotube-Supported Pt Catalyst Coated by N-Doped Carbon

A stable catalyst, Pt/carbon nanotube (CNT) coated with N-doped carbon (Pt/CNT@CN), was designed to reduce selenite (Se(IV)) in water to elemental selenium by liquid-phase catalytic hydrogenation. Commercial Pt/C, pristine Pt/CNT, and carbon-coated Pt/CNT (Pt/CNT@C) were used for benchmarking. The Pt particles in Pt/CNT@CN were completely embedded beneath the coatings to minimize leaching and were not easily accessible to Se(IV). However, Schottky-Mott-type metal-carbon junctions that activate H2 were formed on the coated catalyst, facilitating effective reduction of Se(IV). The initial activity of Pt/CNT@CN (900.5 mg L-1 gcat-1 h-1) was two times higher than that of commercial Pt/C (448.6 mg L-1 gcat-1 h-1). The commercial Pt/C and uncoated Pt/CNT lost their initial activities during reuse and were almost inactive after 10 cycles due to significant Pt leaching (>90%) during the reaction and acid-washing regeneration processes. Pt/CNT@CN maintained 33% of the initial activity after the first cycle and stabilized over the following 9 cycles due to effective protection of Pt particles by carbon coatings. After 10 cycles, the activity of Pt/CNT@CN was over 20 times higher than that of Pt/C and uncoated Pt/CNT. Overall, catalytic hydrogenation using carbon-coated-supported Pt catalysts is an effective and promising approach to remove Se(IV) in water.

Construction of Bi2MoO6/CdS heterostructures with enhanced visible light photocatalytic activity for fuel denitrification

In this work, a novel step-scheme (S-scheme) Bi₂MoO₆/CdS heterojunction (HJ) photocatalyst (PC) was successfully prepared by a two-step solvothermal method for the first time. One-dimensional CdS nanorods were prepared by a simple solvothermal method as a synthesis template. Then, a Bi₂MoO₆ precursor was added to obtain a series of Bi₂MoO₆/CdS HJ composite catalytic materials with different morphologies. The photocatalytic performance of the catalyst was investigated by simulating fuel denitration as a probe reaction under visible light excitation (>420 nm). When compared with pure Bi₂MoO₆ and CdS, the 0.65-Bi₂MoO₆/CdS composite shows the highest photocatalytic activity for pyridine degradation. Degradation of pyridine reached 81% after 240 min of visible light excitation. The degradation rate of 0.65-Bi₂MoO₆/CdS reached 0.4471 h^-1, which was 1.8 and 3.2 times higher than that of CdS (0.2493 h^-1) and Bi₂MoO₆ (0.1427 h^-1), respectively. Combined with a series of characterisation results, the improvement in pyridine degradation activity was mainly attributed to (1) the S-scheme HJ structure between Bi₂MoO₆ and CdS, which greatly promoted the separation of photogenerated electrons and holes while retaining its strong redox ability, (2) the large specific surface area, which provided abundant active sites and efficient adsorption performance and catalytic performance, and (3) the special morphology, which induced multiple reflections of light, thereby improving absorption and utilisation of light. Moreover, after four cycles of pyridine denitrification, the samples still exhibited high activity, indicating good stability and recyclability of the composite catalyst. These findings provide a basis for the development of composite PCs for efficient fuel denitration under visible light irradiation.

Visible Light-Driven Photocatalytic Rhodamine B Degradation Using CdS Nanorods

In this work, highly crystalline CdS nanorods (NRs) were successfully synthesized by a facile, one-step solvothermal method. The as-prepared CdS NRs powder was characterized by XRD, FESEM, Raman, PL, XPS, BET, and UV-visible techniques to evaluate the structural, morphological, and optical properties. The photocatalytic performance of the as-synthesized CdS NRs was investigated for the photodegradation of RhB dye under visible light irradiations. It has been found that CdS NRs show maximum RhB degradation efficiency of 88.4% in 120 min. The excellent photodegradation ability of the CdS NRs can be attributed to their rod-like structure together with their large surface area and surface state. The kinetic study indicated that the photodegradation process was best described by the pseudo-first-order kinetic model. The possible mechanism for the photodegradation of RhB dye over CdS NRs was proposed in this paper.

The fate of oxygen on graphene-catalyst in the photocatalytic water splitting reaction

This paper reveals the transformation of oxygen on graphene in the water splitting process and for the first time, points out a step by step dehydrogenation process with the intermediates OH–C and O–C, and finally CO2.

New Cd(ii) coordination polymers bearing Y-shaped tricarboxylate ligands as photocatalysts for dye degradation

Two Cd(ii) coordination polymers derived from a Y-shaped tricarboxylate ligand were synthesized and their photocatalytic properties against decomposition of methylene blue were investigated experimentally and computationally.

Carbon-Coated Tungsten Oxide Nanospheres Triggering Flexible Electron Transfer for Efficient Electrocatalytic Oxidation of Water and Glucose

Electrocatalytic oxidation of water (i.e., oxygen evolution reaction, OER) plays crucial roles in energy, environment, and biomedicine. It is a key factor affecting the efficiencies of electrocatalytic reactions conducted in aqueous solution, e.g., electrocatalytic water splitting and glucose oxidation reaction (GOR). However, electrocatalytic OER still suffers from problems like high overpotential, sluggish kinetics, and over-reliance on expensive noble-metal-based catalysts. Herein, 15 nm thick carbon-based shell coated tungsten oxide (CTO) nanospheres are loaded on nickel foam to form CTO/NF. An enhanced electrocatalytic OER is triggered on CTO/NF, with the overpotential at 50 mA cm^-2 (317 mV) and the Tafel slope (70 mV dec^-1) on CTO/NF lower than those on pure tungsten oxide (360 mV, 117 mV dec^-1) and noble-metal-based IrO₂ catalysts (328 mV, 96 mV dec^-1). A promoted electrocatalytic GOR is also achieved on CTO/NF, with efficiency as high as 189 μA mM^-1 cm^-2. The carbon-based shell on CTO is flexible for electron transfer between catalyst and reactants and provides catalytically active sites. This improves reactant adsorption and O-H bond dissociation on the catalyst, which are key steps in OER and GOR. The carbon-based shell on CTO retains the catalyst as nanospheres with a higher surface area, which facilitates OER and GOR. It is the multiple roles of the carbon-based shell that increases the electrocatalytic efficiency. These results are helpful for fabricating more efficient noble-metal-free electrocatalysts.

Fast and Efficient Piezo/Photocatalytic Removal of Methyl Orange Using SbSI Nanowires

Piezocatalysis is a novel method that can be applied for degradation of organic pollutants in wastewater. In this paper, ferroelectric nanowires of antimony sulfoiodide (SbSI) have been fabricated using a sonochemical method. Methyl orange (MO) was chosen as a typical pollutant, as it is widely used as a dye in industry. An aqueous solution of MO at a concentration of 30 mg/L containing SbSI nanowires (6 g/L) was subjected to ultrasonic vibration. High degradation efficiency of 99.5% was achieved after an extremely short period of ultrasonic irradiation (40 s). The large reaction rate constant of 0.126(8) s^-1 was determined for piezocatalytic MO decomposition. This rate constant is two orders of magnitude larger than values of reaction rate constants reported in the literature for the most efficient piezocatalysts. These promising experimental results have proved a great potential of SbSI nanowires for their application in environmental purification and renewable energy conversion.

CdS@MoS2 Hetero-structured Nanocomposites Are Highly Effective Photo-Catalysts for Organic Dye Degradation

CdS@MoS₂ hetero-structured nanocomposites (HSNPs) were successfully synthesized via a hydrothermal approach. The morphology and crystal structure of these composites as well as their ability to act as photocatalysts for the degradation of methylene blue were investigated using scanning electron microscopy, X-ray diffraction, transmission electron microscopy, and UV-vis absorption spectroscopy. The developed CdS@MoS₂ nanocomposites exhibited an 80% degradation rate with 30 min of visible light irradiation. To characterize the basis of the photocatalytic properties of these materials, the transient photocurrent densities were determined for the CdS@MoS₂ HSNPs and pure dendritic CdS nanotrees. The results suggest that the photocatalytic activity may reflect electron transfer between the conduction band maximum of CdS and MoS₂. Additionally, the improved visible light absorption, decreased electron-hole pair recombination, and enhanced surface area for more effective dye absorption likely contribute to improved photocatalytic performance.