A Reliable Aerosol-Spray-Assisted Approach to Produce and Optimize Amorphous Metal Oxide Catalysts for Electrochemical Water Splitting

Hierarchical Fe-based electrocatalyst for lattice oxygen mediated water oxidation with Industrial-Level activity

Rational design transition metal-based electrocatalysts for oxygen evolution reaction (OER) at large current densities is vital for industrial applications of alkaline water electrolysis. Here, we present a three-dimensional catalyst comprises of Fe2O3 nanoparticles that are highly dispersed on FeMoO4 nanorods, supported on Ni foam, featuring a hierarchical heterostructure and array morphology. The resulting Fe2O3/FeMoO4/NF electrodes exhibit remarkable OER catalytic activity, achieving overpotentials of 315 mV and 352 mV at current densities of 1000 mA cm-2 and 2000 mA cm-2, respectively, while maintaining outstanding long-term durability (>900 h) at a current density of 500 mA cm-2. In-situ Fourier-transform infrared (FTIR) spectroscopy and theoretical studies demonstrate the direct OO radical coupling for lattice-oxygen-mediated mechanism (LOM)-dominated O2 evolution, thereby breaking the scaling relationship limitation and accelerating reaction kinetics. Operando electrochemical impedance spectroscopy implies fast charge transport. The superior OER performance can be attributed to the abundant heterointerfaces between the active phases in hierarchical structure and the enhanced intrinsic activity through the LOM mechanism. This work paves an avenue for constructing advanced electrocatalysts with industrial-level activity and offering a promising approach for practical applications in alkaline water electrolysis.

Rapid synthesis of metastable materials for electrocatalysis

Metastable materials are considered promising electrocatalysts for clean energy conversions by virtue of their structural flexibility and tunable electronic properties. However, the exploration and synthesis of metastable electrocatalysts via traditional equilibrium methods face challenges because of the requirements of high energy and precise structural control. In this regard, the rapid synthesis method (RSM), with high energy efficiency and ultra-fast heating/cooling rates, enables the production of metastable materials under non-equilibrium conditions. However, the relationship between RSM and the properties of metastable electrocatalysts remains largely unexplored. In this review, we systematically examine the unique benefits of various RSM techniques and the mechanisms governing the formation of metastable materials. Based on these insights, we establish a framework, linking RSM with the electrocatalytic performance of metastable materials. Finally, we outline the future directions of this emerging field and highlight the importance of high-throughput approaches for the autonomous screening and synthesis of optimal electrocatalysts. This review aims to provide an in-depth understanding of metastable electrocatalysts, opening up new avenues for both fundamental research and practical applications in electrocatalysis.

Bifunctional Nanoelectrocatalyst: Semi-Amorphous Cobalt Tungstate-Based Nanocomposites Surpassing Amorphous and Crystalline Counterparts

Electrocatalytic water splitting to hydrogen and oxygen is considered to be one of the significant routes for future renewable energy conversion. Therefore, the development of unique, efficient, and cost-effective bifunctional electrocatalysts, which can perform both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), is critical for the accessible utilization of renewable energy. The increasing overall efficiency of the water-splitting reaction is pivotal for sustainable energy conversion and hydrogen production. Herein, we present a facile solution-based synthesis route to control the crystallinity of the cobalt tungstate (CoWO4) nanomaterials to amorphous, semiamorphous, and crystalline phases and further exploit these nanomaterials as bifunctional electrocatalysts for the HER, OER, and overall electrochemical water splitting reaction. Notably, the semiamorphous cobalt tungstate nanomaterials show a remarkable surface area of approximately 150 m2/g, the highest reported for CoWO4-based materials, and demonstrated superior activity for both the OER and HER and outstanding stability over the amorphous and crystalline counterparts. Notably, the SemiAmp||SemiAmp electrolyzer demonstrated a better performance for overall water splitting than the commercial RuO2||Pt/C electrolyzer.

Hyper-Cross-Linked Polymer-Derived Carbon-Coated Fe-Ni Alloy/CNT as a Bifunctional Electrocatalyst for Rechargeable Zinc-Air Batteries

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are considered to be the most important processes in metal-air batteries and regenerative fuel cell devices. Metal-organic polymers are attracting interest as promising precursors of advanced metal/carbon electrocatalysts because of their hierarchical porous structure along with the integrated metal-carbon framework. We developed carbon-coated CNTs with Ni/Fe and Cu/Fe as active sites. Experimental observations from X-ray photoelectron spectroscopy and X-ray absorption analysis suggest that C@CNT[Ni] outperforms C@CNT[Cu] in the ORR and OER, which is further supported by density functional theory calculations. C@CNT[Ni] exhibits a higher onset potential (0.99 V vs RHE) and a smaller Tafel slope (40.2 mV decade-1) compared to those of C@CNT/[Cu] in an alkaline electrolyte (0.94 V vs RHE and 46.5 mV decade-1, respectively). Such circumstances are attributed to the alloying effect between Ni and Fe in C@CNT[Ni], in contrast to the existing copper iron oxide phase in C@CNT/[Cu]. It is noteworthy that C@CNT[Ni] also displayed an improved OER, demanding its bifunctional property. As a proof of concept, C@CNT[Ni] was utilized in zinc-air batteries, which shows a high energy efficiency of ∼60%, a small charge-discharge voltage gap of 0.78 V, and excellent cycling performance (∼120 h) at 5 mA cm-2 and 25 °C. This protocol expands the utility of novel metal-organic hyper-cross-linked polymer-derived bimetallic electrocatalysts for clean energy research.

Electrodeposited Nitrate-Intercalated NiFeCe-Based (Oxy)hydroxide Heterostructure as a Competent Electrocatalyst for Overall Water Splitting

Electrochemical water splitting is a promising method for the generation of "green hydrogen", a renewable and sustainable energy source. However, the complex, multistep synthesis processes, often involving hazardous or expensive chemicals, limit its broader adoption. Herein, a nitrate (NO3-) anion-intercalated nickel-iron-cerium mixed-metal (oxy)hydroxide heterostructure electrocatalyst is fabricated on nickel foam (NiFeCeOxHy@NF) via a simple electrodeposition method followed by cyclic voltammetry activation to enhance its surface properties. The NiFeCeOxHy@NF electrocatalyst exhibited a low overpotential of 72 and 186 mV at 10 mA cm-2 for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively, in 1.0 M KOH. In a two-electrode system, the NiFeCeOxHy@NF obtained a low voltage of 1.47 V at 10 mA cm-2 in 1.0 M KOH with robust stability. Results revealed that the notable activity of the NiFeCeOxHy@NF catalyst is primarily due to (i) hierarchical nanosheet morphology, which provides a large surface area and abundant active sites; (ii) NO3- anion intercalation enhances electrode stability and eliminates the need for binders while simultaneously promoting a strong catalyst-substrate adhesion, resulting in decreased electrode resistance and accelerated reaction kinetics; and (iii) the unique superhydrophilic surface properties facilitate electrolyte penetration through capillary action and minimize gas bubble formation by reducing interfacial tension.

Developing porous electrocatalysts to minimize overpotential for the oxygen evolution reaction

The development of electrocatalysts for the oxygen evolution reaction (OER) is one of the most critical issues for improving the efficiency of electrochemical water-splitting, which can produce green hydrogen energy without CO2 emissions. This review outlines the advances in the precise design of inorganic- and organic-based porous electrocatalysts, which are designed by various strategies, to catalyze the OER in the electrolytic cycle for efficient water-splitting. For developing high-performance electrocatalysts with low overpotentials, it is important to design a chemical composition that optimizes binding energy for an intermediate in the OER and allows the easy access of reactants to active sites depending on the porosity of electrocatalysts. Porous structures give us the positive opportunity to increase the accessible surface of active sites and effective diffusion of targeting molecules, which is potentially one of the guidelines for developing active electrocatalysts. Further modification of the frameworks is also powerful for tailoring the function of pore surfaces and the environment of inner spaces. Designable organic molecules can also be embedded inside inorganic- and organic-based frameworks. According to chemical composition (inorganic and organic), nanostructure (crystalline and amorphous) and additional modification (metal doping and organic design) of porous electrocatalysts, the current status of resultant OER performance is surveyed with some problems that should be solved for improving the OER activity. The remarkable progress in OER electrocatalysts is also introduced for demonstrating the bifunctional hydrogen evolution reaction (HER) and for utilizing seawater.

In-depth understanding the synergisms of Cu atomic clusters on Cu single atoms for highly effective electrocatalytic oxygen reduction reaction and Zn-Air battery

In this paper, a novel, simple and mild soft template assisted strategy and further carbonization approach has been constructed to the size-tunable preparation of porous Cu-N-C/Surfactant catalysts successfully. Note that the pluronic F127 has a significant influence on the synthesis of porous Cu-N-C/F127 with the atomically dispersed Cu-N4 and adjacent Cu atomic clusters (ACs) than other surfactants owing to their particular non-ionic structure. By combining a series of experimental analysis and density functional theory (DFT) calculations, the synergistic effects between the adjacent Cu ACs and atomically dispersed Cu-N4 are favorable for manipulating the binding energy of O2 adsorption and intermediates desorption at the atomic interface of catalysts, resulting in an excellent electrocatalytic ORR performance with a faster kinetics for Cu-N-C/F127 than those of the Cu-N-C, Cu-N-C/CTAB, Cu-N-C/SDS, and comparable with the commercial Pt/C catalyst. This method not only provides a novel approach for synthesizing highly effective copper based single atom catalysts toward ORR, but also offers an in-depth understanding of the synergisms of adjacent ACs on the Cu single atoms (SAs) for highly effective electrocatalytic ORR and Zn-air Battery.

Design, Synthesis, Magnetic Properties, and Hydrogen Evolution Reaction of a Butterfly-like Heterometallic Trinuclear [CuII2MnII] Cluster

A novel heterometallic trinuclear cluster [CuII2MnII(cpdp)(NO3)2(Cl)] (1) has been designed and synthesized by employing a molecular library approach that uses CuCl2·2H2O and Mn(NO3)2·4H2O as inorganic metal salts and H3cpdp as a multifunctional organic scaffold (H3cpdp = N,N'-bis[2-carboxybenzomethyl]-N,N'-bis[2-pyridylmethyl]-1,3-diaminopropan-2-ol). This heterometallic cluster has emerged as an unusual ferromagnetic material and promising electrocatalyst for hydrogen evolution reaction (HER) in the domain of inorganic and materials chemistry. Crystal structure analysis establishes the structural arrangement of 1, revealing a butterfly-like topology with an unusual seven-coordinated Mn(II) center. Formation of this cluster is accomplished by a self-assembly process through functionalization of 1 with one μ2:η1:η1-nitrate and two μ2:η2:η1-benzoate groups via the CuII(μ2-NO3)CuII} and {CuII(μ2-O2CC6H5)MnII} linkages, respectively. Variable-temperature SQUID magnetometry revealed the coexistence of ferromagnetic and antiferromagnetic interactions in 1. The observed magnetic behavior in 1 is unexpected because of a large Cu-O-Mn angle with a value of 132.05°, indicating that the correlation between coupling constants and the structural parameters is a multifactor problem. This cluster shows excellent electrocatalytic performance for the HER attaining a current density of 10 mA/cm2 with a Tafel slope of 183 mV dec-1 at a 310 mV overpotential value. Essentially, cluster 1 shows exceptional electrochemical stability at ambient temperature, accompanied by minimal degradation of the current density as examined by chronoamperometric studies. Density functional theory calculations establish the mechanistic insight into the HER process, indicating that the CuII-OCO-MnII site is the active site for formation of molecular hydrogen.

Cs-Ba-Ru/La2O3-MgO Catalysts from Microdrop-Confined Pyrolysis for Superior NH3 Synthesis under Mild Conditions

Support modification is an important way to improve the activity of the Ru/MgO-based NH3 synthesis catalyst. This work synthesized 24 composite MgO-based supports of MOx-MgO (M = La, Zn, etc.) via a microdrop-confined pyrolysis (MDCPy) method and then prepared the corresponding Cs-Ba-Ru/MOx-MgO catalysts using the impregnation method. Under the same NH3 synthesis conditions, the activity of the Cs-Ba-Ru/MOx-MgO catalysts composed of 17 elements such as Pr was significantly lower than that of Cs-Ba-Ru/MgO, while the activity of the Cs-Ba-Ru/MOx-MgO catalysts composed of four elements such as Nd was comparable to that of Cs-Ba-Ru/MgO, and the activity of the Cs-Ba-Ru/MOx-MgO catalysts composed of three elements such as La was significantly higher than that of Cs-Ba-Ru/MgO. Among them, it is clear that La2O3-MgO composite supports have the most significant effect on the improvement of NH3 synthesis performance. Through the optimization of the La/Mg ratio and loading of Ru, the optimal activities achieved ∼7 mol(NH3)/g(Ru)/h with corresponding Ru loading of 0.25-0.5 wt % under mild conditions as follows: H2/N2 ratio of 3:1, temperature of 400 °C, pressure of 3 MPa and a weight hourly space velocity (WHSV) of 96.0 L/gcat/h. In addition, the CsBa-Ru/La2O3-MgO catalyst showed good stability.

Effect of Selective Metallic Defects on Catalytic Performance of Alloy Nanosheets

Defects in the crystal structure of nanomaterials are important for their diverse applications. As, defects in 2D framework allow surface confinement effects, efficient molecular accessibility, high surface-area to volume-ratio and lead to higher catalytic activity, but it is challenging to expose defects of specific metal on the surface of 2D alloy and find the correlation between defective structure and electrocatalytic properties with atomic precision. Herein, the work paves the way for the controlled synthesis of ultrathin porous Ir-Cu nanosheets (NSs) with selectively iridium (Ir) rich defects to boost their performance for acidic oxygen evolution reaction (OER). X-ray absorption spectroscopy reveals that the oxidized states of Ir in defects of porous NSs significantly impact the electronic structure and decline the energy barrier. As a result, porous Ir-Cu/C NSs deliver improved OER activity with an overpotential of 237 mV for reaching 10 mA cm-2 and exhibit significantly higher mass activity than benchmark Ir/C under acidic conditions. Therefore, the present work highlights the concept of constructing a selective noble metal defect-rich open structure for catalytic applications.

Strong Electronic Interaction in High-Entropy Oxide Enhances Oxygen Evolution Reaction

High-entropy oxides are a new type of material with significant application potential. However, the lack of a universal HEO preparation method severely limits the property study and application of HEOs. Herein, we report a universal approach of spray pyrolysis for the preparation of various HEOs and study the electrocatalytic performance of HEOs toward the oxygen evolution reaction. FeCoNiMoWOx HEO exhibits an overpotential of 281 mV at 10 mA cm-2 and a Tafel slope of 34.5 mV dec-1, which are far superior to those of the corresponding medium-entropy oxide and low-entropy oxide. It is found that the high entropy of the HEO greatly strengthens the interaction between Fe and Mo/W and produces abundant oxygen vacancies (OVs) around Mo and W. This work not only provides a universal preparation method for HEOs but also deepens our understanding of OER catalytic activity of HEOs.

Tailoring hypervalent Nickel induced by oxygen vacancy toward enhanced oxygen evolution reaction performance in self-supporting NiFe-(oxy)hydroxides electrodes

NiFe-(oxy)hydroxides are the most active transition metal oxide electrocatalysts for oxygen evolution reaction (OER) under the alkaline media. Herein, we controllably manipulated oxygen vacancy (VO)-tunable NiFe-(oxy) hydroxides that their OER performances possessed a volcano-type relationship with VO concentration, positively-correlated with Ni3+/Ni2+ ratio. Theoretical simulations further unearthed the enhanced activation and dissociation of H2O by the inserting of VO. As a result, the optimal sample featuring the Ni3+/Ni2+ ratio of 30.3 % and VO of 23.8 % exhibited the overpotential of 243 mV at the current density of 100 mA cm-2, simultaneously lasting 120 h durability without any attenuation, exceding the most reported NiFe-(oxy)hydroxides. This work offers an innovative view to understand the OER performance using hypervalent Ni ratio induced by VO defects.

In situ synergistic reduced graphene oxide-boron carbon nitride nanosheet heterostructures for high-performance fabric-based supercapacitors

We develop a new type of heterostructure nanocomposite made of reduced graphene oxide-boron carbon nitride nanosheets (rGO-BCN) by B-C covalent bonds. The rGO-BCN nanocomposite delivers a large specific surface and excellent electrochemical properties, and is then constructed into flexible fabric-based high-performance supercapacitor electrodes based on the microfluidic electrospinning technology.

Efficient and durable MoFeNi hydroxide anode: Room temperature recrystallization regulated morphology-, valence- and crystallinity-dependent water oxidation performance

The formation of crystal-amorphous (c-a) interfaces by modulating the crystallinity of the material is a promising strategy for the oxygen evolution reaction (OER). Herein, a recrystallization growth at room temperature to regulate the crystallinity of catalysts is reported. The MoFeNi hydroxide precursor was synthesized by the solvothermal method, and then the crystallinity of the material was controlled by adjusting the concentration of Na2S in the immersion solution. These c-a heterogeneous interfaces significantly improved the OER activity of the catalysts while ensuring structural stability. The best catalyst exhibited a low overpotential of 195 mV to reach 10 mA cm-2 in 1 M KOH. It also showed good stability, operating stably at high current densities for 96 h without significant degradation. In addition, the anode of the two-electrode water splitting electrolyzer required only 1.46 V to reach 10 mA cm-2 and operated for a long time without significant degradation. This method will provide new insights and perspectives for developing efficient and stable OER catalysts.

Active sites engineering on FeNi alloy/Cr3C2 heterostructure for superior oxygen evolution activity

Exploring high active electrocatalysts for oxygen evolution reaction (OER) is of great significance for a sustainable hydrogen economy. The development of non-precious transition metals, with sufficient active sites and ample intrinsic activity, remains a challenge. Herein, a new type of FeNi-Cr3C2 heterostructure anchored on carbon sheets (FeNi-Cr3C2@C) was reported, which can effectively catalyze OER with swift kinetics and outstanding intrinsic activity. The introduced Cr3C2 phase not only serves as a support material but also effectively suppresses the thermal coarsening of FeNi alloy nanoparticle. The FeNi-Cr3C2@C displays a robust OER activity with a low overpotential of 283 mV at the current density of 10 mA cm-2, a high turnover frequency value of 1.69 s-1 at the overpotential of 300 mV (10 times higher than that of FeNi@C) and good stability in alkaline media. Density functional theory calculations (DFT) calculations show that Cr3C2 can facilitate the generation of electron-rich region at the Ni site in FeNi alloys as an active site, exhibiting an optimized adsorption behavior toward oxygen intermediate species with regard to decreased thermodynamic energy barriers. Our work opens up a promising path to modulate the electrocatalytic active sites using inexpensive and durable Cr3C2 for electrochemical catalytic reactions.

Ru Cluster Incorporated NiMoO(P)4 Nanosheet Arrays as High-Efficient Bifunctional Catalyst for Wind/Solar-To-Hydrogen Generation Systems

Developing cost-efficient bifunctional water splitting catalysts is crucial for sustainable hydrogen energy applications. Herein, ruthenium (Ru)-incorporated and phosphorus (P)-doped nickel molybdate (Ru-NiMoO(P)4 ) nanosheet array catalysts are synthesized. Due to the synergy of Ru clusters and NiMoO(P)4 by the modulated electronic structure and the rich active sites, impressively, Ru-NiMoO(P)4 exhibits superior OER (194 mV @ 50 mA cm-2 ) and HER (24 mV @ 10 mA cm-2 ) activity in alkaline media, far exceeding that of commercial Pt/C and RuO2 catalysts. Meanwhile, as bifunctional catalyst, to drive the overall water splitting at the current density of 10 mA cm-2 , Ru-NiMoO(P)4 requires only 1.45 V and maintaining stable output for 100 h. Furthermore, Ru-NiMoO(P)4 also possesses excellent capability for seawater electrolysis hydrogen production. Moreover, the successful demonstration of wind and solar hydrogen production systems provide the feasibility of the ultra-low Ru loading catalyst for large-scale hydrogen production in the future.

Deciphering the Space Charge Effect of the CoNiLDH/FeOOH n-n Heterojunction for Efficient Electrocatalytic Oxygen Evolution

Space charge transfer is an effective strategy to regulate the electron density of narrow bandgap semiconductors for enhancing electrocatalytic activity. Herein, the CoNiLDH/FeOOH n-n heterojunction hollow nanocages structure is constructed. The hollow structure provides abundant catalytic active sites and enhances mass transfer. The space charge region in the n-n heterojunction significantly promotes the adsorption of OH- and electron transfer; and the built-in electric field accelerates the electron transport, optimizes the electronic structure during the catalytic reaction process, and ensures the stability of surface charged active center sites in the heterojunction. Thus, CoNiLDH/FeOOH delivers an excellent oxygen evolution reaction (OER) overpotential of 250 mV to achieve a current density of 10 mA cm-2 with a small Tafel slope of 60 mV dec-1 , and superior electrocatalytic durability for 210 h at a high current density. Density functional theory calculations further verify that the space charge effect and built-in electric field in the n-n heterojunction of CoNiLDH/FeOOH can improve the electron transfer and lower the adsorption energy of OH- and the reaction energy barrier of the rate-determining step. This work provides a new fundamental understanding of the space charge effect of semiconductor heterojunction during the electrocatalytic process for developing more efficient OER electrocatalysts.

Iron substitution enabled lattice oxygen oxidation and cation leaching for promoting surface reconstruction in electrocatalytic oxygen evolution

The low-cost transition metal oxides have drawn widespread interest as alternatives to noble metal-based electrocatalysts for oxygen evolution reaction (OER). Transition metal oxides usually undergo surface reconstruction during electrochemical reaction to form the actual active species. However, in-depth understanding and regulating of the surface reconstruction of active phases for oxides in OER remains an onerous challenge. Herein, we report a simple Fe element substitution strategy to facilitate the surface reconstruction of spinel oxide NiCr2O4 to generate active (oxy)hydroxides. The activated Fe-doped NiCr2O4 (Act-Fe-NCO) exhibits a lower OER overpotential of 259 mV at 10 mA cm-2 than activated NiCr2O4 (Act-NCO, 428 mV), and shows excellent stability for 120 h. The electrochemically activated CV measurement and nanostructure characterizations reveal that Fe substitution could promote the consumption of lattice oxygen during electrochemical activation to induce the leaching of soluble Cr cations, thereby facilitating the reconstruction of remaining Ni cations on the surface into (oxy)hydroxide active species. Moreover, theoretical calculations further demonstrate that the O 2p band center of NiCr2O4 moves towards the Fermi level due to Fe substitution, thus promoting lattice oxygen oxidation and providing greater structural flexibility for surface reconstruction. This work shows a promising way to regulate the surface reconstruction kinetics and OER electrocatalytic activity of transition metal oxides.

RuO2 nanoparticles anchored on g-C3N4 as an efficient bifunctional electrocatalyst for water splitting in acidic media

The electrolysis of water, particularly proton exchange membrane (PEM) water electrolysis, holds great promise for hydrogen production in industry. However, the catalyst used in this process is prone to dissolution in acidic environments, making it imperative to develop cost-effective, highly efficient, and acid-stable electrocatalytic materials to overcome this challenge and enable large-scale application of PEM water electrolysis technology. Herein, we prepared ruthenium oxide (RuO₂)/graphitic carbon nitride (g-C₃N₄) composites (RuO₂/C₃N₄) via a combination of sol-gel and annealing methods. The g-C₃N₄ provides a large surface area, while RuO₂ is uniformly deposited on the g-C₃N₄ surface. The interaction between g-C₃N₄ and RuO₂ stabilizes the RuO₂ nanoparticles and enhances long-term water oxidation stability. This unique structure and the combined advantages of RuO₂ and g-C₃N₄ yield exceptional electrocatalytic activity toward both the oxygen evolution reaction (OER, 240 mV@10 mA cm^-2) and the hydrogen evolution reaction (HER, 109 mV@10 mA cm^-2), with excellent durability (over 28 h), and a cell voltage of 1.607 V at 10 mA cm^-2 when used in an RuO₂/C₃N₄||RuO₂/C₃N₄ electrolyzer. This study highlights the efficacy of the g-C₃N₄ support method in designing highly stable Ru-based OER electrocatalysts for efficient acidic water splitting.

Regulating the kinetics of zinc-ion migration in spinel ZnMn2O4 through iron doping boosted aqueous zinc-ion storage performance

Spinel ZnMn₂O₄ with a three-dimensional channel structure is one of the important cathode materials for aqueous zinc ions batteries (AZIBs). However, like other manganese-based materials, spinel ZnMn₂O₄ also has problems such as poor conductivity, slow reaction kinetics and structural instability under long cycles. Herein, ZnMn₂O₄ mesoporous hollow microspheres with metal ion doping were prepared by a simple spray pyrolysis method and applied to the cathode of aqueous zinc ion battery. Cation doping not only introduces defects, changes the electronic structure of the material, improves its conductivity, structural stability, and reaction kinetics, but also weakens the dissolution of Mn²⁺. The optimized 0.1 % Fe-doped ZnMn₂O₄ (0.1% Fe-ZnMn₂O₄) has a capacity of 186.8 mAh g^-1 after 250 charge-discharge cycles at 0.5 A g^-1 and the discharge specific capacity reaches 121.5 mAh g^-1 after 1200 long cycles at 1.0 A g^-1. The theoretical calculation results show that doping causes the change of electronic state structure, accelerates the electron transfer rate, and improves the electrochemical performance and stability of the material.

Unveiling the Accelerated Water Electrolysis Kinetics of Heterostructural Iron-Cobalt-Nickel Sulfides by Probing into Crystalline/Amorphous Interfaces in Stepwise Catalytic Reactions

Amorphization and crystalline grain boundary engineering are adopted separately in improving the catalytic kinetics for water electrolysis. Yet, the synergistic effect and advance in the cooperated form of crystalline/amorphous interfaces (CAI) have rarely been elucidated insightfully. Herein, a trimetallic FeCo(NiS2 )4 catalyst with numerous CAI (FeCo(NiS2 )4 -C/A) is presented, which shows highly efficient catalytic activity toward both hydrogen and oxygen evolution reactions (HER and OER). Density functional theory (DFT) studies reveal that CAI plays a significant role in accelerating water electrolysis kinetics, in which Co atoms on the CAI of FeCo(NiS2 )4 -C/A catalyst exhibit the optimal binding energy of 0.002 eV for H atoms in HER while it also has the lowest reaction barrier of 1.40 eV for the key step of OER. H2 O molecules are inclined to be absorbed on the interfacial Ni atoms based on DFT calculations. As a result, the heterostructural CAI-containing catalyst shows a low overpotential of 82 and 230 mV for HER and OER, respectively. As a bifunctional catalyst, it delivers a current density of 10 mA cm-2 at a low cell voltage of 1.51 V, which enables it a noble candidate as metal-based catalysts for water splitting. This work explores the role of CAI in accelerating the HER and OER kinetics for water electrolysis, which sheds light on the development of efficient, stable, and economical water electrolysis systems by facile interface-engineering implantations.

Deciphering the Space Charge Effect of the p-n Junction between Copper Sulfides and Molybdenum Selenides for Efficient Water Electrolysis in a Wide pH Range

Space charge transfer is crucial for an efficient electrocatalytic process, especially for narrow-band-gap metal sulfides/selenides. Herein, we designed and synthesized a core-shell structure which is an ultrathin MoSe₂ nanosheet coated CuS hollow nanoboxes (CuS@MoSe₂) to form an open p-n junction structure. The space charge effect in the p-n junction region will greatly improve electron mass transfer and conduction, and also have abundant active interfaces. It was used as a bifunctional electrocatalyst for water oxidation at a wide pH range. It exhibits a low overpotential of 49 mV for the HER and 236 mV for the OER at a current density of 10 mA·cm^-2 in acidic pH, 72 mV for the HER and 219 mV at 10 mA·cm^-2 for the OER in alkaline pH, and 62 mV for the HER and 230 mV at 10 mA·cm^-2 for the OER under neutral conditions. The experimental results and density functional theory calculations testify that the p-n junction in CuS@MoSe₂ designed and synthesized has a strong space charge region with a synergistic effect. The built-in field can boost the electron transport during the electrocatalytic process and can stabilize the charged active center of the p-n junction. This will be beneficial to improve the electrocatalytic performance. This work provides the understanding of semiconductor heterojunction applications and regulating the electronic structure of active sites.

Controlled synthesis of trimetallic nitrogen-incorporated CoNiFe layered double hydroxide electrocatalysts for boosting the oxygen evolution reaction

The development of non-precious trimetallic electrocatalysts exhibiting high activity and stability is a promising strategy for fabricating efficient electrocatalysts for the oxygen evolution reaction (OER). In this study, trimetallic nitrogen-incorporated CoNiFe (N-CoNiFe) was produced to solve the low OER efficiency using a facile co-precipitation method in the presence of ethanolamine (EA) ligands. A series of CoNiFe catalysts at different EA concentrations were also investigated to determine the effects of the ligand in the co-precipitation of a trimetallic system. The introduction of an optimized EA concentration (20 mM) improved the electrocatalytic performance of N-CoNiFe dramatically, with an overpotential of 318 mV at 10 mA cm-2 in 1.0 M KOH and a Tafel slope of 72.2 mV dec-1. In addition, N-CoNiFe shows high durability in the OER process with little change in the overpotential (ca. 16.0 mV) at 10 mA cm-2 after 2000 cycles, which was smaller than that for commercial Ir/C (38.0 mV).

Amorphous High-entropy Non-precious metal oxides with surface reconstruction toward highly efficient and durable catalyst for oxygen evolution reaction

High-entropy materials (HEMs) have attracted extensive interests in exploring multicomponent systems for highly efficient and durable catalysts. Tuning composition and configuration of HEMs provides untapped opportunities for accessing better catalytic performance. Herein, we report three amorphous high-entropy transition metal oxides catalysts with uniform composition through a simple and controllable liquid phase non-equilibrium reduction method. The self-made catalyst FeCoNiMnBO_x exhibits excellent oxygen evolution performance, including a low overpotential (266 mV at 10 mA cm^-2), small Tafel slope (64.5 mV dec^-1) and extremely high stability (only 3.71% increase of potential after 100 h test and no current decay after cyclic voltammetry of 31,000 cycles). The outstanding performance can be attributed to the in-situ electrochemical activation induced surface reconstruction to form a stable oxyhydroxide surface layer, the cocktail effect (multi-metal synergy) brought by high entropy, and the advantages of amorphous structure itself. The outstanding catalytic properties of the new high-entropy amorphous metal oxide, as well as its advantages of low cost and simple preparation, suggest its great potential in water splitting.

Anchoring Co3S4 nanowires on NiCo2O4 nanosheet arrays as high-performance electrocatalyst for hydrogen and oxygen evolution

The development of catalysts which can substitute expensive metals to efficiently split water is currently a hot research topic. Here, multi-layered NF/NiCo2O4/Co3S4 nanocomposite was prepared on 3D porous nickel foam...

Metal and metal oxide amorphous nanomaterials towards electrochemical applications

Amorphous nanomaterials have aroused extensive interest due to their unique properties. Their performance is highly related with their distinct atomic arrangements, which have no long-range order but possess short- to medium-range order. Herein, an overview of state-of-the-art synthesis methods of amorphous nanomaterials, structural characteristics and their electrochemical properties is presented. Advanced characterization methods for analyzing and proving the local order of amorphous structures, such as X-ray absorption fine structure spectroscopy, atomic electron tomography and nanobeam electron diffraction, are introduced. Various synthesis strategies for amorphous nanomaterials are covered, especially the salt-assisted metal organic decomposition method to prepare ultrathin amorphous nanosheets. Furthermore, the design and structure-activity relationship of amorphous nanomaterials towards electrochemical applications, including electrocatalysts and battery anode/cathode materials, is discussed.

Rational design of metal oxide catalysts for electrocatalytic water splitting

Electrocatalytic energy conversion between electricity and chemical bonding energy is realized through redox reactions with multiple charge transfer steps at the electrode-electrolyte interface. The surface atomic structure of the electrode materials, if appropriately designed, will provide an energetically affordable pathway with individual reaction intermediates that not only reduce the thermodynamic energy barrier but also allow an acceptably fast kinetic rate of the overall redox reaction. As one of the most abundant and stable forms, oxides of transitional metals demonstrated promising electrocatalytic activities towards multiple important chemical reactions. In this topical review, we attempt to discuss the possible avenues to construct the electrocatalytic active surface for this important class of materials for two essential chemical reactions for water splitting. A general introduction of the electrochemical water splitting process on the electrocatalyst surface with applied potential will be provided, followed by a discussion on the fundamental charge transfers and the mechanism. As the generally perceived active sites are chemical reaction dependent, we offer a general overview of the possible approaches to construct or create electrocatalytically active sites in the context of surface atomic structure engineering. The review concludes with perspectives that summarize challenges and opportunities in electrocatalysis and how these can be addressed to unlock the electrocatalytic potentials of the metal oxide materials.

Recent Advances in Processing and Applications of Heterobimetallic Oxide Thin Films by Aerosol-assisted Chemical Vapor Deposition

The fabrication of smart, efficient, and innovative devices critically needs highly refined thin-film nanomaterials; therefore, facile, scalable, and economical methods of thin films production are highly sought-after for the sustainable growth of the hi-tech industry. The chemical vapor deposition (CVD) technique is widely implemented at the industrial level due to its versatile features. However, common issues with a precursor, such as reduced volatility and thermal stability, restrict the use of CVD to produce novel and unique materials. A modified CVD approach, named aerosol-assisted CVD (AACVD), has been the center of attention due to its remarkable tendency to fabricate uniform, homogenous, and distinct nano-architecture thin films in an uncomplicated and straightforward manner. Above all, AACVD can utilize any custom-made or commercially available precursors, which can be transformed into a transparent solution in a common organic solvent; thus, a vast array of compounds can be used for the formation of nanomaterial thin films. This review article highlights the importance of AACVD in fabricating heterobimetallic oxide thin films and their potential in making energy production (e. g., photoelectrochemical water splitting), energy storage (e. g., supercapacitors), and environmental protection (e. g., electrochemical sensors) devices. A heterobimetallic oxide system involves two metallic species either in a composite, solid solution, or metal-doped metal oxides. Moreover, the AACVD tunable parameters, such as temperature, deposition time, and precursor, which drastically affect thin films microstructure and their performance in device applications, are also discussed. Lastly, the key challenges and issues of scaling up AACVD to the industrial level and processing for emerging functional materials are also highlighted.

Effects of Annealing Temperature on the Oxygen Evolution Reaction Activity of Copper-Cobalt Oxide Nanosheets

Developing high performance, highly stable, and low-cost electrodes for the oxygen evolution reaction (OER) is challenging in water electrolysis technology. However, Ir- and Ru-based OER catalysts with high OER efficiency are difficult to commercialize as precious metal-based catalysts. Therefore, the study of OER catalysts, which are replaced by non-precious metals and have high activity and stability, are necessary. In this study, a copper–cobalt oxide nanosheet (CCO) electrode was synthesized by the electrodeposition of copper–cobalt hydroxide (CCOH) on Ni foam followed by annealing. The CCOH was annealed at various temperatures, and the structure changed to that of CCO at temperatures above 250 °C. In addition, it was observed that the nanosheets agglomerated when annealed at 300 °C. The CCO electrode annealed at 250 °C had a high surface area and efficient electron conduction pathways as a result of the direct growth on the Ni foam. Thus, the prepared CCO electrode exhibited enhanced OER activity (1.6 V at 261 mA/cm²) compared to those of CCOH (1.6 V at 144 mA/cm²), Co₃O₄ (1.6 V at 39 mA/cm²), and commercial IrO₂ (1.6 V at 14 mA/cm²) electrodes. The optimized catalyst also showed high activity and stability under high pH conditions, demonstrating its potential as a low cost, highly efficient OER electrode material.

Layered double hydroxide-based electrocatalysts for the oxygen evolution reaction: identification and tailoring of active sites, and superaerophobic nanoarray electrode assembly

The electrocatalytic oxygen evolution reaction (OER) is a critical half-cell reaction for hydrogen production via water electrolysis. However, the practical OER suffers from sluggish kinetics and thus requires efficient electrocatalysts. Transition metal-based layered double hydroxides (LDHs) represent one of the most active classes of OER catalysts. An in-depth understanding of the activity of LDH based electrocatalysts can promote further rational design and active site regulation of high-performance electrocatalysts. In this review, the fundamental understanding of the structural characteristics of LDHs is demonstrated first, then comparisons and in-depth discussions of recent advances in LDHs as highly active OER catalysts in alkaline media are offered, which include both experimental and computational methods. On top of the active site identification and structural characterization of LDHs on an atomic scale, strategies to promote the OER activity are summarised, including doping, intercalation and defect-making. Furthermore, the concept of superaerophobicity, which has a profound impact on the performance of gas evolution electrodes, is explored to enhance LDHs and their derivatives for a large scale OER. In addition, certain operating standards for OER measurements are proposed to avoid inconsistency in evaluating the OER activity of LDHs. Finally, several key challenges in using LDHs as anode materials for large scale water splitting, such as the issue of stability and the adoption of membrane-electrode-assembly based electrolysers, are emphasized to shed light on future research directions.

Strong Electronic Interaction Enhanced Electrocatalysis of Metal Sulfide Clusters Embedded Metal-Organic Framework Ultrathin Nanosheets toward Highly Efficient Overall Water Splitting

Unique metal sulfide (MS) clusters embedded ultrathin nanosheets of Fe/Ni metal-organic framework (MOF) are grown on nickel foam (NiFe-MS/MOF@NF) as a highly efficient bifunctional electrocatalyst for overall water splitting. It exhibits remarkable catalytic activity and stability toward both the oxygen evolution reaction (OER, ƞ = 230 mV at 50 mA cm-2) and hydrogen evolution reaction (HER, ƞ = 156 mV at 50 mA cm-2) in alkaline media, and bi-functionally catalyzes overall alkaline water splitting at a current density of 50 mA cm-2 by 1.74 V cell voltage without iR compensation. The enhancement mechanism is ascribed to the impregnated metal sulfide clusters in the nanosheets, which not only promote the formation of ultrathin nanosheet to greatly enlarge the reaction surface area while offering high electric conductivity, but more importantly, efficiently modulate the electronic structure of the catalytically active atom sites to an electron-rich state via strong electronic interaction and strengthen the adsorption of oxygenate intermediate to facilitate fast electrochemical reactions. This work reports a highly efficient HER/OER bifunctional electrocatalyst and may shed light on the rational design and synthesis of uniquely structured MOF-derived catalysts.

Enhanced stability and ultrahigh activity of amorphous ripple nanostructured Ni-doped Fe oxyhydroxide electrode toward synergetic electrocatalytic water splitting

The development of high-performance catalysts for oxygen-evolution reaction (OER) is paramount for cost-effective conversion of renewable electricity to fuels and chemicals. Here we report, highly efficient, ultra-durable and earth-abundant Ni@Fe-NP electrocatalysts developed by solvothermal method for oxygen evolution reaction (OER). The newly developed oxygen electrode show prolonged stability and high catalytic-activity in line with water oxidation keeping alkaline condition which requires overpotential of only 211 mV at current density of 10 mA cm-2. Collectively, the as-prepared amorphous Ni@Fe-NP rippled nanostructured electrode is the most effective oxygen evolution electrode in alkaline solution. Therefore, this study will offer exciting new avenues for designing self-supported electrode materials towards water splitting and other applications.

Designing a Transparent CdIn2 S4 /In2 S3 Bulk-Heterojunction Photoanode Integrated with a Perovskite Solar Cell for Unbiased Water Splitting

The integration of photoelectrochemical photoanodes and solar cells to build an unbiased solar-to-hydrogen (STH) conversion system provides a promising way to solve the energy crisis. The key point is to develop highly transparent photoanodes, while its bulk separation efficiency (η_sep. ) and surface injection efficiency are as high as possible. To resolve this contradiction, first a novel CdIn₂ S₄ /In₂ S₃ bulk heterojunctions in the interior of nanosheets is designed as a photoanode with high transparency and an ultrahigh η_sep. up to 90%. Furthermore, decorating the ultrathin amorphous SnO₂ layer by atomic layer deposition, the surface oxygen-evolution kinetics of the photoanode are increased significantly. As a result, the onset potential of the photoanode shifts negatively to 0.02 V vs RHE, and the photocurrent density boosts to 2.98 mA cm^-2 at 1.23 V vs RHE, which is ten times higher than that of pristine CdIn₂ S₄ . Such a high-performance photoanode enables the integrated metal sulfide photoanode-perovskite solar cell system to deliver a STH conversion efficiency of 3.3%.

Amorphous Catalysts and Electrochemical Water Splitting: An Untold Story of Harmony

In the near future, sustainable energy conversion and storage will largely depend on the electrochemical splitting of water into hydrogen and oxygen. Perceiving this, countless research works focussing on the fundamentals of electrocatalysis of water splitting and on performance improvements are being reported everyday around the globe. Electrocatalysts of high activity, selectivity, and stability are anticipated as they directly determine energy- and cost efficiency of water electrolyzers. Amorphous electrocatalysts with several advantages over crystalline counterparts are found to perform better in electrocatalytic water splitting. There are plenty of studies witnessing performance enhancements in electrocatalysis of water splitting while employing amorphous materials as catalysts. The harmony between the flexibility of amorphous electrocatalysts and electrocatalysis of water splitting (both the oxygen evolution reaction [OER] and the hydrogen evolution reaction [HER]) is one of the untold and unsummarized stories in the field of electrocatalytic water splitting. This Review is devoted to comprehensively discussing the upsurge of amorphous electrocatalysts in electrochemical water splitting. In addition to that, the basics of electrocatalysis of water splitting are also elaborately introduced and the characteristics of a good electrocatalyst for OER and HER are discussed.

Mesoporous Cu-Ce-Ox Solid Solutions from Spray Pyrolysis for Superior Low-Temperature CO Oxidation

Development of Pt group metal-free catalysts for low-temperature CO oxidation remains critical. In this work, active and stable mesoporous Cu-Ce-O_x solid solutions are prepared by using spray pyrolysis. The specific surface areas and pore volumes reach as high as 170 m²  g^-1 and 0.24 cm³  g^-1 , respectively. The results of CO oxidation study suggest that (1) the catalyst obtained by spray pyrolysis possesses much higher activity than those made by co-precipitation, sol-gel, and hydrothermal methods; (2) the optimal Cu_0.2 -Ce_0.8 -O_x solid solution presents a reactivity over 28 times that of both single-component CuO and CeO₂ at 70 °C. Based on the study of pure-phase Cu-Ce-O_x solid solutions by selective leaching of segregated CuO_x species, the active center for CO oxidation is confirmed as the bimetallic Cu-Ce-O site, whereas the individual CuO_x particles not only act as spectators but also block the active Cu-Ce-O sites. A low apparent activation energy of approximately 48 kJ mol^-1 is detected for CO oxidation at the Cu-Ce-O site, making Cu-Ce-O_x solid solutions able to present high activity at low temperature. Furthermore, the Cu-Ce-O_x catalysts exhibit excellent stability and thermal tolerance toward CO oxidation.