Mitigating the Kinetic Hindrance of Single-Crystalline Ni-Rich Cathode via Surface Gradient Penetration of Tantalum

High-entropy doping promising ultrahigh-Ni Co-free single-crystalline cathode toward commercializable high-energy lithium-ion batteries

The development of advanced layered Ni-rich cathodes is essential for high-energy lithium-ion batteries (LIBs). However, the prevalent Ni-rich cathodes are still plagued by inherent issues of chemomechanical and thermal instabilities and limited cycle life. For this, here, we introduce an efficient approach combining single-crystalline (SC) design with in situ high-entropy (HE) doping to engineer an ultrahigh-Ni cobalt-free layered cathode of LiNi0.88Mn0.03Mg0.02Fe0.02Ti0.02Mo0.02Nb0.01O2 (denoted as HE-SC-N88). Thanks to the SC- and HE-doping merits, HE-SC-N88 is featured with a grain-boundary-free and stabilized structure with minimal lattice strain, preventing mechanical degradation, reducing surface parasitic reactions, and mitigating oxygen loss. Accordingly, our HE-SC-N88 cathode demonstrates exceptional electrochemical properties particularly with prolonged cycling stability under strenuous conditions in both half and full cells, and the delayed O loss-induced phase transitions upon heating. More meaningfully, our design of HE doping in redefining the ultrahigh-Ni Co-free SC cathodes will make a tremendous progress toward industrial application of next-generation LIBs.

Atomic Origin of Chemomechanical Failure of Layered Cathodes in All-Solid-State Batteries

The ever-increasing demand for safety has thrust all-solid-state batteries (ASSBs) into the forefront of next-generation energy storage technologies. However, the atomic mechanisms underlying the failure of layered cathodes in ASSBs, as opposed to their counterparts in liquid electrolyte-based lithium-ion batteries (LIBs), have remained elusive. Here, leveraging artificial intelligence-enhanced super-resolution electron microscopy, we unravel the atomic origins dictating the chemomechanical degradation of technologically crucial high-Ni layered oxide cathodes in ASSBs. We reveal that the coupling of surface frustration and interlayer-shear-induced phase transformation exacerbates the chemomechanical breakdown of layered cathodes. Surface frustration, a phenomenon previously unobserved in liquid electrolyte-based LIBs, emerges through electrochemical processes involving surface nanocrystallization coupled with rock salt transformation. Simultaneously, delithiation-induced interlayer shear yields the formation of chunky O1 phases and intricate interfaces/transition motifs, distinct from scenarios observed in liquid electrolyte-based LIBs. Bridging the knowledge gap between the failure mechanisms of layered cathodes in solid-state electrolytes and conventional liquid electrolytes, our study provides unprecedented atomic-scale insights into the degradation pathways of layered cathodes in ASSBs.

Invoking Interfacial Engineering Boosts Structural Stability Empowering Exceptional Cyclability of Ni-Rich Cathode

The cycling stability of LiNi0.8Co0.1Mn0.1O2 under high voltages is hindered by the occurrence of hybrid anion- and cation-redox processes, leading to oxygen escape and uncontrolled phase collapse. In this study, an interfacial engineering strategy involving a straightforward mechanical ball milling and low-temperature calcination, employing a Se-doped and FeSe2&Fe2O3-modified approach is proposed to design a stable Ni-rich cathode. Se2- are selectively adsorbed within oxygen vacancies to form O─TM─Se bond, effectively stabilizing lattice oxygen, and preventing structural distortion. Simultaneously, the Se-NCM811//FeSe2//Fe2O3 self-assembled electric field is activated, improving interfacial charge transfer and coupling. Furthermore, FeSe2 accelerates Li+ diffusion and reacts with oxygen to form Fe2O3 and SeO2. The Fe2O3 coating mitigates hydrofluoric acid erosion and acts as an electrostatic shield layer, limiting the outward migration of oxygen anions. Impressively, the modified materials exhibit significantly improved electrochemical performance, with a capacity retention of 79.7% after 500 cycles at 1C under 4.5 V. Furthermore, it provides an extraordinary capacity retention of 94.6% in 3-4.25 V after 550 cycles in pouch-type full battery. This dual-modification approach demonstrates its feasibility and opens new perspective for the development of stable lithium-ion batteries operating at high voltages.

A Cable-Stayed Honeycomb Superstructure to Improve the Stability of Li-Rich Materials via Inhibiting Interlaminar Lattice Strain

In layered Li-rich materials, over stoichiometric Li forms an ordered occupation of LiTM6 in transition metal (TM) layer, showing a honeycomb superstructure along [001] direction. At the atomic scale, the instability of the superstructure at high voltage is the root cause of problems such as capacity/voltage decay of Li-rich materials. Here a Li-rich material with a high Li/Ni disorder is reported, these interlayer Ni atoms locate above the honeycomb superstructure and share adjacent O coordination with honeycomb TM. These Ni─O bonds act as cable-stayed bridge to the honeycomb plane, and improve the high-voltage stability. The cable-stayed honeycomb superstructure is confirmed by in situ X-ray diffraction to have a unique cell evolution mechanism that it can alleviate interlaminar lattice strain by promoting in-plane expansion along a-axis and inhibiting c-axis stretching. Electrochemical tests also demonstrate significantly improved long cycle performance after 500 cycles (86% for Li-rich/Li half cell and 82% for Li-rich/Si-C full cell) and reduced irreversible oxygen release. This work proves the feasibility of achieving outstanding stability of lithium-rich materials through superstructure regulation and provides new insights for the development of the next-generation high-energy-density cathodes.

Emerging Chemistry for Wide-Temperature Sodium-Ion Batteries

The shortage of resources such as lithium and cobalt has promoted the development of novel battery systems with low cost, abundance, high performance, and efficient environmental adaptability. Due to the abundance and low cost of sodium, sodium-ion battery chemistry has drawn worldwide attention in energy storage systems. It is widely considered that wide-temperature tolerance sodium-ion batteries (WT-SIBs) can be rapidly developed due to their unique electrochemical and chemical properties. However, WT-SIBs, especially for their electrode materials and electrolyte systems, still face various challenges in harsh-temperature conditions. In this review, we focus on the achievements, failure mechanisms, fundamental chemistry, and scientific challenges of WT-SIBs. The insights of their design principles, current research, and safety issues are presented. Moreover, the possible future research directions on the battery materials for WT-SIBs are deeply discussed. Progress toward a comprehensive understanding of the emerging chemistry for WT-SIBs comprehensively discussed in this review will accelerate the practical applications of wide-temperature tolerance rechargeable batteries.

Low-Electronegativity Cationic High-Entropy Doping to Trigger Stable Anion Redox Activity for High-Ni Co-Free Layered Cathodes in Li-Ion Batteries

LiNi0.8 Co0.1 Mn0.1 O2 (NCM-811) exhibits the highest capacity in commercial lithium-ion batteries (LIBs), and the high Ni content (80 %) provides the only route for high energy density. However, the cationic structure instability arisen from the increase of Ni content (>80 %) limits the further increase of the capacity, and inevitable O2 release related to anionic structure instability hinders the utilization of anion redox activity. Here, by comparing various combinations of high-entropy dopants substituted Co element, we propose a low-electronegativity cationic high-entropy doping strategy to fabricate the high-Ni Co-free layered cathode (LiNi0.8 Mn0.12 Al0.02 Ti0.02 Cr0.02 Fe0.02 O2 ) that exhibits much higher capacity and cycling stability. Configurational disorder originated from cationic high-entropy doping in transition metal (TM) layer, anchors the oxidized lattice oxygen ((O2 )n- ) to preserve high (O2 )n- content, triggering the anion redox activity. Electron transfer induced by applying TM dopants with lower electronegativity than that of Co element, increases the electron density of O in TM-O octahedron (TM-O6 ) configuration to reach higher (O2 )n- content, resulting in the higher anion redox activity. With exploring the stabilization effect on both cations and anions of high-entropy doping and low-electronegativity cationic modified anion redox activity, we propose an innovative and variable pathway for rationally tuning the properties of commercial cathodes.

Trace Y Doping Regulated Bulk/Interfacial Reactions of P2-Layered Oxides for Ultrahigh-Rate Sodium-Ion Batteries

P2-phase layered cathodes play a pivotal role in sodium-ion batteries due to their efficient Na+ intercalation chemistry. However, limited by crystal disintegration and interfacial instability, bulk and interfacial failure plague their electrochemical performance. To address these challenges, a structural enhancement combined with surface modification is achieved through trace Y doping. Based on a synergistic combination of experimental results and density functional theory (DFT) calculations, the introduction of partial Y ions at the Na site (2d) acts as a stabilizing pillar, mitigating the electrostatic repulsions between adjacent TMO2 slabs and thereby relieving internal structural stress. Furthermore, the presence of Y effectively optimizes the Ni 3d-O 2p hybridization, resulting in enhanced electronic conductivity and a notable rapid charging ability, with a capacity of 77.3 mA h g-1 at 40 C. Concurrently, the introduction of Y also induces the formation of perovskite nano-islands, which serve to minimize side reactions and modulate interfacial diffusion. As a result, the refined P2-Na0.65 Y0.025 [Ni0.33 Mn0.67 ]O2 cathode material exhibits an exceptionally low volume variation (≈1.99%), an impressive capacity retention of 83.3% even at -40 °C after1500 cycles at 1 C.

Relieving Stress Concentration through Anion-Cation Codoping toward Highly Stable Nickel-Rich Cathode

Nickel-rich LiNi0.8Co0.15Al0.015O2 (NCA) with excellent energy density is considered one of the most promising cathodes for lithium-ion batteries. Nevertheless, the stress concentration caused by Li+/Ni2+ mixing and oxygen vacancies leads to the structural collapse and obvious capacity degradation of NCA. Herein, a facile codoping of anion (F-)-cation (Mg2+) strategy is proposed to address these problems. Benefiting from the synergistic effect of F- and Mg2+, the codoped material exhibits alleviated Li+/Ni2+ mixing and demonstrates enhanced electrochemical performance at high voltage (≥4.5 V), outperformed the pristine and F-/Mg2+ single-doped counterparts. Combined experimental and theoretical studies reveal that Mg2+ and F- codoping decreases the Li+ diffusion energy barrier and enhances the Li+ transport kinetics. In particular, the codoping synergistically suppresses the Li+/Ni2+ mixing and lattice oxygen escape, and alleviates the stress-strain accumulation, thereby inhibiting crack propagation and improving the electrochemical performance of the NCA. As a consequence, the designed Li0.99Mg0.01Ni0.8Co0.15Al0.05O0.98F0.02 (Mg1+F2) demonstrates a much higher capacity retention of 82.65% than NCA (55.69%) even after 200 cycles at 2.8-4.5 V under 1 C. Furthermore, the capacity retention rate of the Mg1+F2||graphite pouch cell after 500 cycles is 89.6% compared to that of the NCA (only 79.4%).

Defect Strategy in Solid-State Lithium Batteries

Solid-state lithium batteries (SSLBs) have great development prospects in high-security new energy fields, but face major challenges such as poor charge transfer kinetics, high interface impedance, and unsatisfactory cycle stability. Defect engineering is an effective method to regulate the composition and structure of electrodes and electrolytes, which plays a crucial role in dominating physical and electrochemical performance. It is necessary to summarize the recent advances regarding defect engineering in SSLBs and analyze the mechanism, thus inspiring future work. This review systematically summarizes the role of defects in providing storage sites/active sites, promoting ion diffusion and charge transport of electrodes, and improving structural stability and ionic conductivity of solid-state electrolytes. The defects greatly affect the electronic structure, chemical bond strength and charge transport process of the electrodes and solid-state electrolytes to determine their electrochemical performance and stability. Then, this review presents common defect fabrication methods and the specific role mechanism of defects in electrodes and solid-state electrolytes. At last, challenges and perspectives of defect strategies in high-performance SSLBs are proposed to guide future research.

Significantly Stabilizing Hydrogen Evolution Reaction Induced by Nb-Doping Pt/Co(OH)2 Nanosheets

High stability and efficiency of electrocatalysts are crucial for hydrogen evolution reaction (HER) toward water splitting in an alkaline media. Herein, a novel nano-Pt/Nb-doped Co(OH)₂ (Pt/NbCo(OH)₂ ) nanosheet is designed and synthesized using water-bath treatment and solvothermal reduction approaches. With nano-Pt uniformly anchored onto NbCo(OH)₂ nanosheet, the synthesized Pt/NbCo(OH)₂ shows outstanding electrocatalytic performances for alkaline HER, achieving a high stability for at least 33 h, a high mass activity of 0.65 mA µg^-1 Pt, and a good catalytic activity with a low overpotential of 112 mV at 10 mA cm^-2 . Both experimental and theoretical results prove that Nb-doping significantly optimizes the hydrogen adsorption free energy to accelerate the Heyrovsky step for HER, and boosts the adsorption of H₂ O, which further enhances the water activation. This study provides a new design methodology for the Nb-doped electrocatalysts in an alkaline HER field by facile and green way.

Thermodynamically Stable Dual-Modified LiF&FeF3 layer Empowering Ni-Rich Cathodes with Superior Cyclabilities

Pushing the limit of cutoff potentials allows nickel-rich layered oxides to provide greater energy density and specific capacity whereas reducing thermodynamic and kinetic stability. Herein, a one-step dual-modified method is proposed for in situ synthesizing thermodynamically stable LiF&FeF₃ coating on LiNi_0.8 Co_0.1 Mn_0.1 O₂ surfaces by capturing lithium impurity on the surface to overcome the challenges suffered. The thermodynamically stabilized LiF&FeF₃ coating can effectively suppress the nanoscale structural degradation and the intergranular cracks. Meanwhile, the LiF&FeF₃ coating alleviates the outward migration of O^α- (α<2), increases oxygen vacancy formation energies, and accelerates interfacial Li⁺ diffusion. Benefited from these, the electrochemical performance of LiF&FeF₃ modified materials is improved (83.1% capacity retention after 1000 cycles at 1C), even under exertive operational conditions of elevated temperature (91.3% capacity retention after 150 cycles at 1C). This work demonstrates that the dual-modified strategy can simultaneously address the problems of interfacial instability and bulk structural degradation and represents significant progress in developing high-performance lithium-ion batteries (LIBs).

Improved Electrochemical Performance of Spinel LiNi0.5Mn1.5O4 Cathode Materials with a Dual Structure Triggered by LiF at Low Calcination Temperature

High-voltage spinel LiNi_0.5Mn_1.5O₄ (LNMO), which has the advantages of high energy density, low cost, environmental friendliness, and being cobalt-free, is considered one of the most promising cathode materials for the next generation of power lithium-ion batteries. However, the side reaction at the interface between the LNMO cathode material and electrolyte usually causes a low specific capacity, poor rate, and poor cycling performance. In this work, we propose a facilitated method to build a well-tuned dual structure of LiF coating and F^- doping LNMO cathode material via simple calcination of LNMO with LiF at low temperatures. The experimental results and DFT analysis demonstrated that the powerful interface protection due to the LiF coating and the higher lithium diffusion coefficient caused by F^- doping effectively improved the electrochemical performance of LNMO. The optimized LNMO-1.3LiF cathode material presents a high discharge capacity of 140.3 mA h g^-1 at 1 C and 118.7 mA h g^-1 at 10 C. Furthermore, the capacity is retained at 75.4% after the 1000th cycle at 1 C. Our research provides a concrete guidance on how to effectively boost the electrochemical performance of LNMO cathode materials.

Chemomechanically Stable Small Single-crystal Mo-doped LiNi0.6 Co0.2 Mn0.2 O2 Cathodes for Practical 4.5 V-class Pouch-type Li-ion Batteries

High voltage can cost-effectively boost energy density of Ni-rich cathodes based Li-ion batteries (LIBs), but compromises their mechanical, electrochemical and thermal-driven stability. Herein, a collaborative strategy (i.e., small single-crystal design and hetero-atom doping) is devised to construct a chemomechanically reliable small single-crystal Mo-doped LiNi_0.6 Co_0.2 Mn_0.2 O₂ (SS-MN6) operating stably under high voltage (≥4.5 V vs. Li/Li⁺ ). The substantially reduced particle size combined with Mo⁶⁺ doping absorbs accumulated localized stress to eradicate cracks formation, subdues the surface side reactions and lattice oxygen missing meanwhile, and improves thermal tolerance at highly delithiated state. Consequently, the SS-MN6 based pouch cells are endowed with striking deep cycling stability and wide-temperature-tolerance capability. The contribution here provides a promising way to construct advanced cathodes with superb chemomechanical stability for next-generation LIBs.

Beneficial Role of Inherently Formed Residual Lithium Compounds on the Surface of Ni-Rich Cathode Materials for All-Solid-State Batteries

This study validates the beneficial role of residual Li compounds on the surface of Ni-rich cathode materials (LiNi_xCo_yMn_zO₂, NCM). Residual Li compounds on Ni-rich NCM are naturally formed during the synthesis procedure, which degrades the initial Coulombic efficiency and generates slurry gelation during electrode fabrication in Li-ion batteries (LIBs) using liquid electrolytes. To solve this problem, washing pretreatment is usually introduced to remove residual Li compounds on the NCM surface. In contrast to LIBs, we found that residual Li compounds can serve as a functional layer that suppresses the interfacial side reactions of the NCM in all-solid-state batteries (ASSBs). The formation of resistive phosphate-based compounds from the undesirable side reaction during the initial charging step is suppressed by the residual Li compounds on the surface of the NCM, thereby reducing polarization growth in ASSBs and enhancing rate performances. The advantageous effects of the intrinsic residual Li compounds on the NCM surface suggest that the essential washing process of the NCM for the liquid-based LIB system should be reconsidered for ASSB systems.

Construction of Planar Gliding Restriction Buffer and Kinetic Self-Accelerator Stabilizing Single-Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode

The single-crystalline Ni-rich cathode has aroused much attention for extenuating the cycling and safety crises in comparison to the polycrystalline cathode. However, planar gliding and kinetic hindrance hinder its chemo-mechanical properties with cycling, which induce delamination cracking and damage the mechanical integrity in single crystals. Herein, a robust Li_2.64(Sc_0.9Ti_0.1)₂(PO₄)₃ (LSTP) ion/electron conductive network was constructed to decorate single-crystal LiNi_0.9Co_0.05Mn_0.05O₂ (SC90) particles. Via physicochemical characterizations and theoretical calculations, this LSTP coating that evenly grows on the SC90 particle with good lattice matching and strong bonding effectively restricts the anisotropic lattice collapse along the c-axis and the cation mixing activity of SC90, thus suppressing planar gliding and delamination cracking during repeated high-voltage lithiation/delithiation processes. Moreover, such a 3D LSTP network can also facilitate the lithium-ion transport and prevent the electrolyte's corrosion, lightening the kinetic hindrance and triggering the surface phase transformation. Combined with the Li metal anode, the LSTP-modified SC90 cell exhibits a desirable capacity retention of 90.5% at 5 C after 300 cycles and stabilizes the operation at 4.3/4.5 V. Our results provide surface modification engineering to mitigate planar gliding and kinetic hindrance of the single-crystalline ultra-high Ni-rich cathode, which inspires peers to design other layered cathode materials.

Phosphorylation of Li-Rich Mn-Based Layered Oxides for Anion Redox and Structural Stability

Li-rich Mn-based layered oxides are proposed to be candidates for high-energy Li-ion batteries. However, their large-scale production is still hampered by poor rate capability and severe voltage decay. It was mainly attributed to the irreversible oxygen loss, which induces transition metal ion migration, electrolyte consumption, and structural evolution. Herein, we propose an effective strategy of phosphorylation, in which the phosphate ion is induced to remove the surface labile oxygen. It urges the Li₂MnO₃ component to transform to the spinel-like structure and promotes the anionic redox process, thus facilitating lithium-ion diffusion and improving structural stability. As a result, the Li₂MnO₃ component is more prone to be activated, with the capacity increased by 18% in comparison with the pristine one. It also exhibits a superior capacity retention of 86.1% after 150 extended cycles and better rate performance delivering a capacity of 148.1 mA h g^-1 even at 10 C. The effective phosphorylation opens a new way to tune anion redox chemistry and obtain structurally stable materials.

Boosting performance of Co-free Li-rich cathode material through regulating the anionic activity by means of the strong TaO bonding

Benefiting from the extra contribution of O redox, Co-free Li-rich layered oxides (LRNMO) can satisfy the requirement of high specific capacities. However, during the high-voltage charging process, lattice oxygen being oxidized to O^- or O₂ leads to a gradual transition of the structure from layered to spinel phase, capacity and voltage decline, hindering the practical application of LRNMO in the lithium-ion battery. Here, a surface modification strategy of Li_1.2Ni_0.32Mn_0.48O_2-δ doped with Ta⁵⁺ ions is proposed, in which the Ta⁵⁺ ions occupy the lithium sites of the lattice structure on the surface layer of LRNMO and form a Ta₂O₅ coating layer. The modified electrode exhibits excellent rate performance and cycling stability, with 94.9% and 85.5% capacity retention rate and voltage retention rate, respectively, after 200 cycles at 1C. Moreover, the initial coulomb efficiency and ionic conductivity of the modified electrode are also apparently enhanced. Simultaneously, the decreased Li/Ni mixing degree of the modified electrode reflects the improvement of the structural stability. Therefore, the modification strategy through strong metal-oxygen bonding to integrate the surface structure to regulate the oxygen activity provides a new direction for the design of high energy density Co-free Li-rich cathode materials.

Combining Surface Holistic Ge Coating and Subsurface Mg Doping to Enhance the Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathodes

Nickel-rich layered cathode LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) is the most promising cathode material due to its high specific capacity and lower cost than lithium cobalt oxides. However, NCM811 suffers from structural instability and capacity degradation during charge-discharge cycles. Herein, we report a strategy to construct a conductive network by employing a holistic Ge coating, which interconnects Mg-doped NCM811 particles. Dopant Mg ions, serving as a "pillar" in the Li slab of NCM811, substantially enhance the structural reversibility. The Ge particles are not only coated on the electrode surface but also enter into the electrode pores to form a multidimensional conductive structure, which improves the conductivity of the electrode and slows down the interface side reaction, thus minimizing the irreversible loss of NCM811 upon long cycling. The modified NCM811 electrode delivers a high discharge capacity (∼204 mAh g^-1 at 0.1C), excellent rate performance (∼155 mAh g^-1 at 10C), and high capacity retention (83% after 200 cycles) even at 4.4 V. Additionally, a cylindrical full battery with graphite/modified NCM811 undergoes 1000 cycles with 86% capacity retention at 2C.

Effects of Co/Mn Content Variation on Structural and Electrochemical Properties of Single-Crystal Ni-Rich Layered Oxide Materials for Lithium Ion Batteries

The development of single-crystal nickel-rich layered LiNi_xCo_yMn_1-x-yO₂ materials (S-NCMs) represents the most significant progress for the electrification applications of nickel-rich ternary materials. There has been prior research on the important role of transition metal elements in agglomerated materials, supplemented by surface and internal lattice optimization to drive the performance improvements. However, studies on S-NCMs, especially on the role of transition metals (TM, i.e., Co and Mn), have not been reported. In this study, we synthesized four kinds of S-NCMs with different Co/Mn contents and studied their structural, electrochemical, kinetic, and thermodynamic properties with different Co/Mn contents. The results were as follows: (1) Electrochemically, Co was more effective than Mn at 25 °C at enhancing the intercalation/deintercalation kinetics, which resulted in an increased discharge capacity, an improved rate capability, and a reduced energy loss. (2) Thermodynamically, Mn was more effective at maintaining a higher thermal stability than Co, especially at a low cutoff voltage, but at a high cutoff voltage, the difference between the action of Co and Mn decreased. The main finding of this work was the enhanced structural stability provided by Co, which could be attributed to the following: (i) the absence of the H2/H3 phase transformation when Co exceeded 15%, which inhibited the irreversible phase transformation and reduced the volume strain, and (ii) the lower degrees of decrease in the cell parameters a and c with higher contents of Co, which contributed to a low cracking degree along the (003) crystal plane. The current work provides an important reference for the single-crystallization strategy of nickel-rich materials.

Competitive Doping Chemistry for Nickel-Rich Layered Oxide Cathode Materials

Chemical modification of electrode materials by heteroatom dopants is crucial for improving storage performance in rechargeable batteries. Electron configurations of different dopants significantly influence the chemical interactions inbetween and the chemical bonding with the host material, yet the underlying mechanism remains unclear. We revealed competitive doping chemistry of Group IIIA elements (boron and aluminum) taking nickel-rich cathode materials as a model. A notable difference between the atomic radii of B and Al accounts for different spatial configurations of the hybridized orbital in bonding with lattice oxygen. Density functional theory calculations reveal, Al is preferentially bonded to oxygen and vice versa, and shows a much lower diffusion barrier than B^III . In the case of Al-preoccupation, the bulk diffusion of B^III is hindered. In this way, a B-rich surface and Al-rich bulk is formed, which helps to synergistically stabilize the structural evolution and surface chemistry of the cathode.

koLayered Oxide Cathode-Electrolyte Interface towards Na-Ion Batteries: Advances and Perspectives

With the ever increasing demand for low-cost and economic sustainable energy storage, Na-ion batteries have received much attention for the application on large-scale energy storage for electric grids because of the worldwide distribution and natural abundance of sodium element, low solvation energy of Na⁺ ion in the electrolyte and the low cost of Al as current collectors. Starting from a brief comparison with Li-ion batteries, this review summarizes the current understanding of layered oxide cathode/electrolyte interphase in NIBs, and discusses the related degradation mechanisms, such as surface reconstruction and transition metal dissolution. Recent advances in constructing stable cathode electrolyte interface (CEI) on layered oxide cathode are systematically summarized, including surface modification of layered oxide cathode materials and formulation of electrolyte. Urgent challenges are detailed in order to provide insight into the imminent developments of NIBs.

Gospel for Improving the Lithium Storage Performance of High-Voltage High-Nickel Low-Cobalt Layered Oxide Cathode Materials

High-voltage high-nickel low-cobalt lithium layered oxide cathodes show great application prospects for lithium-ion batteries due to their low cost and high capacity. However, deterioration of the bulk structure and the electrode-electrolyte interface will significantly endanger the cycle life and thermal stability of the battery as the nickel content and voltage increase. We present here a lattice doping strategy to greatly improve the cell performance by doping a small dose of Ti (2 mol %) in LiNi_0.6Co_0.05Mn_0.35O₂. Through density functional theory calculations, we know that the diffusion energy barrier of Li⁺ decreases and the activation energy of surface lattice oxygen atom loss increases after Ti doping, thereby improving the rate performance and inhibiting the undesired phase transition. The battery in situ X-ray diffraction (XRD) pattern demonstrates that Ti doping tunes the H1-H2 phase-transition process from a two-phase reaction to a single-phase reaction and inhibits the undesired H2-H3 phase transition, minimizing the mechanical degradation. The variable temperature in situ XRD reveals delayed phase-transition temperature to improve thermal stability. These improvements can be attributed to Ti doping to passivate the reactivity of the layered oxide cathode, which is fundamentally related to the strong Ti-O bond and no unpaired electrons for Ti⁴⁺. This work provides valuable strategic guidelines for the use of high-voltage high-nickel low-cobalt cathodes in lithium-ion batteries.