Progress in Hydrogen Production Coupled with Electrochemical Oxidation of Small Molecules

Optimized electronic structure induced by cobalt metaphosphate/phosphide for highly efficient hydrazine-assisted water splitting at high current densities

Hydrazine oxidation reaction (HzOR) emerges as a superior alternative to the sluggish oxidation reaction (OER) due to the ultralow thermodynamic potential. Herein, abundant Co2P4O12/Co2P heterostructures were constructed in N-doped carbon (denoted Co2P4O12/Co2P@NC) derived from the waste cigarette butts through the carbonization and subsequent phosphorization process. Owing to the hierarchically wave-like architecture, well-defined electron transfer pathway, and strong interfacial coupling between Co2P4O12 and Co2P, Co2P4O12/Co2P@NC expressed outstanding electrocatalytic performance, requiring ultralow potentials of -207 and 91 mV at a large current density of 500 mA cm-2 for the hydrogen evolution reaction (HER) and HzOR, respectively. When integrated into a hydrazine-assisted water electrolysis as both electrodes, the device required only 0.79 V to drive 500 mA cm-2, significantly lower than that for traditional water electrolysis. Density functional theory (DFT) calculations revealed that the presence of Co2P4O12 optimized the energy barriers of crucial reaction intermediates and accelerated the reaction kinetics for HER and HzOR effectively. Furthermore, an innovative and economic parallel integrated system, entirely driven by solar energy, was proposed as a concept for successive energy-saving hydrogen. This work provides a promising and pragmatic path for energy-efficient hydrogen generation and high-value reutilization of cigarette butt simultaneously.

Self-Powered Electrocatalytic Aldehyde Reforming Fuel Cell for Sustainable H2 Generation with ∼200% Faradaic Efficiency

Formaldehyde (HCHO), a promising yet challenging hydrogen carrier, offers a unique opportunity for efficient hydrogen generation through electro-oxidation, simultaneously eliminating harmful HCHO and contributing to environmental sustainability. This study rises to the challenge by pioneering a hybrid acid/alkali formaldehyde hydrogen production fuel cell (h-AAFHFC), an integrated system that integrates anodic partial electro-reforming of aldehydes at low potential with the cathodic hydrogen evolution reaction (HER). The device introduces a new self-powered paradigm for hydrogen generation, driven by electrochemical neutralization energy (ENE), featuring high Faradaic efficiency for hydrogen production, co-generation of electricity, and HCOOH. The h-AAFHFC attains an open-circuit voltage (OCV) of 1.11 V and a peak power density of 94 mW cm-2, enabling simultaneous hydrogen production at both electrodes with an extraordinary Faradaic efficiency of approximately 200%. This breakthrough marks a transformative shift, moving from traditional electricity-driven systems to self-sustaining H2 generation. Our work demonstrates a promising pathway for sustainable hydrogen production, advancing the potential of clean hydrogen energy technologies.

Entropy-Driven Competitive Adsorption Sites Tailoring Unlocks Efficient Hybrid Conversion Zn-Air Batteries

Hybrid conversion Zn-air batteries (HC-ZABs) epitomize a typical integrated energy storage and conversion device that advances green chemistry and reduces carbon emissions. However, balancing efficiency and selectivity of electrocatalytic cathodic reactions remains the bottleneck in such batteries. Herein, we address this issue by designing a high-entropy perovskite, La0.6Sr0.1Ca0.1Rb0.1Y0.1CoO3 (HE-LCO), which outperforms conventional perovskites in offering enhanced electrocatalytic activity, better selectivity, and outstanding stability for cathodic benzyl alcohol oxidation reaction (BAOR). Combined spectroscopy characterizations, operando measurements, and theoretic calculations reveal that the entropy-driven modulation of the second coordination sphere in HE-LCO balances the adsorption of nucleophile benzyl alcohol and OH-, while inhibiting competing oxygen evolution reaction (OER). Based on this rationalized HE-LCO electrocatalyst, HC-ZABs realized efficient energy storage and benzoic acid production, boasting a long lifespan of 900 cycles at 20 mA cm-2 and 6.7 mAh cm-2 per cycle. Further, practical ampere-hour-scale HC-ZABs demonstrated a 62.8% energy efficiency improvement and an average benzoic acid yield of 0.85 g per cycle, highlighting the potential of this integrated device for simultaneous sustainable energy storage and green electrochemical synthesis.

Tailoring the Surface Curvature of the Supporting Carbon to Tune the d-Band Center of Fe-N-C Single-Atom Catalysts for Zinc-Urea-Air Batteries

The catalytic activities of the Fe-N-C single-atom catalysts (SACs) are associated with the varying atomic interactions through its characteristic coordination geometry. Yet, modulation of the surface curvature of carbon acting as a supporting body has not been investigated. Herein, we report the superior catalytic activity for the oxygen reduction reaction (ORR) and enhanced performance for urea oxidation reaction (UOR) of single Fe atoms anchored on a highly curved N-doped carbon dodecahedron with concave morphology (Fe SA/NhcC). Theoretical calculations and in situ spectroscopy disclose that the curvature of the carbon support helps to shorten the bond length of Fe-N, spatially redistributing the charges around the Fe and thereby lowering the d-band center toward optimal adsorption for oxygenated species. The Fe SA/NhcC catalyst displays an ultrahigh half-wave potential of 0.926 V for ORR and a small potential difference of 0.686 V for bifunctional ORR/UOR. A rechargeable Zn-urea-air battery with the Fe SA/NhcC cathode displays robust discharge durability, excellent cycling lifespan and higher energy efficiency compared to conventional Zn-air batteries. This work provides new insight into promoting the catalytic activity of SACs through varying the surface curvature of the supporting carbon, tailoring geometric configuration and electronic states of SACs.

Isolated Metal Centers Activate Small Molecule Electrooxidation: Mechanisms and Applications

Electrochemical oxidation of small molecules shows great promise to substitute oxygen evolution reaction (OER) or hydrogen oxidation reaction (HOR) to enhance reaction kinetics and reduce energy consumption, as well as produce high-valued chemicals or serve as fuels. For these oxidation reactions, high-valence metal sites generated at oxidative potentials are typically considered as active sites to trigger the oxidation process of small molecules. Isolated atom site catalysts (IASCs) have been developed as an ideal system to precisely regulate the oxidation state and coordination environment of single-metal centers, and thus optimize their catalytic property. The isolated metal sites in IASCs inherently possess a positive oxidation state, and can be more readily produce homogeneous high-valence active sites under oxidative potentials than their nanoparticle counterparts. Meanwhile, IASCs merely possess the isolated metal centers but lack ensemble metal sites, which can alter the adsorption configurations of small molecules as compared with nanoparticle counterparts, and thus induce various reaction pathways and mechanisms to change product selectivity. More importantly, the construction of isolated metal centers is discovered to limit metal d-electron back donation to CO 2p* orbital and reduce the overly strong adsorption of CO on ensemble metal sites, which resolve the CO poisoning problems in most small molecules electro-oxidation reactions and thus improve catalytic stability. Based on these advantages of IASCs in the fields of electrochemical oxidation of small molecules, this review summarizes recent developments and advancements in IASCs in small molecules electro-oxidation reactions, focusing on anodic HOR in fuel cells and OER in electrolytic cells as well as their alternative reactions, such as formic acid/methanol/ethanol/glycerol/urea/5-hydroxymethylfurfural (HMF) oxidation reactions as key reactions. The catalytic merits of different oxidation reactions and the decoding of structure-activity relationships are specifically discussed to guide the precise design and structural regulation of IASCs from the perspective of a comprehensive reaction mechanism. Finally, future prospects and challenges are put forward, aiming to motivate more application possibilities for diverse functional IASCs.

Recent progress in non-noble metal nano-electrocatalysts for hybrid water splitting

Hybrid water splitting, which combines thermodynamically favorable inorganic/organic oxidation with hydrogen evolution, typically requires lower cell voltage to achieve the same current density as traditional water splitting. By replacing the sluggish oxygen evolution reaction (OER), the overall energy input required in hybrid water splitting can be greatly decreased. Moreover, by selecting the appropriate anodic substrate, energy-saving hydrogen production can be achieved alongside pollutant degradation or organic upgrading, thereby enhancing its practicality and environmental benefits. Recent advancements in nanostructured non-noble metal catalysts have shown significant potential for enhancing the anodic oxidation reaction performance. These nanocatalysts offer a platform for optimizing the reaction kinetics and selectivity owing to their high surface area and tunable properties, potentially eliminating the need for noble metal catalysts in hybrid water splitting. This review summarizes recent advances in non-noble metal nanocatalysts for diverse alternative anodic oxidation reactions, including pollutants' oxidative degradation and selective organic upgrading. Their performance, mechanism, and practical applications in hybrid water splitting are also highlighted. This review also discusses current challenges and future directions, such as targeted catalyst design, industrial-scale evaluation, electrolyte system optimization, and production collection-related problems. By addressing these issues, hybrid water splitting holds the promise of becoming a transformative technique for sustainable hydrogen production, offering both economic and environmental advantages.

Urine electrooxidation for energy-saving hydrogen generation

Urea electrooxidation offers a cost-effective alternative to water oxidation for energy-saving hydrogen production. However, its practical application is limited by expensive urea reactants and sluggish reaction kinetics. Here, we present an efficient urine electrolysis system for hydrogen production, using cost-free urine as feedstock. Our system leverages a discovered Cl-mediated urea oxidation mechanism on Pt catalysts, where adsorbed Cl directly couple with urea to form N-chlorourea intermediates, which are then converted into N2 via intermolecular N-N coupling. This rapid mediated-oxidation process notably improves the activity and stability of urine electrolysis while avoiding Cl-induced corrosion, enabling over 200 hours of operation at reduced voltages. Accordingly, a notable reduction in the electricity consumption is achieved during urine electrolysis (4.05 kWh Nm-3) at 300 mA cm-2 in practical electrolyser for hydrogen production, outperforming the traditional urea (5.62 kWh Nm-3) and water (4.70-5.00 kWh Nm-3) electrolysis.

Industrial-Level Paired Electrosynthesis of Valuable Chemicals over a High-Performance Heterostructural Electrode

Paired electrosynthetic technology is of significance to realize the co-production of high-added value chemicals. However, exploiting efficient bifunctional electrocatalyst of the concurrent electrocatalysis to achieve the industrial-level performance is still challenging. Herein, an amorphous Co2P@MoOx heterostructure is rationally designed by in situ electrodeposition strategy, which is acted as excellent bifunctional catalysts for the electrocatalytic nitrite reduction reaction (NO2RR) and glycerol oxidation reaction (GOR). The membrane-electrode assembly (MEA) electrolyzer realizes a low voltage of 1.30 V, robust stability over 200 h at 100 mA cm-2, high Faraday efficiencies and yield of NH3 (above 95 %, 49.7 mg h-1 cm-2) and formate (above 95 %, 304.4 mg h-1 cm-2) at industrial-level current density of 500 mA cm-2. In situ spectroscopy studies have shown that high-valence CoOOH is the main active material of GOR, and the main catalytic conversion pathway of NO2RR involves key *NH2OH reaction intermediates. In addition, theoretical calculations confirm that the Co2P@MoOx heterostructure has strong interfacial electronic interaction and optimized reaction energy barriers, which endows its intrinsically high electrocatalytic activity for the co-electrosynthesis of NH3 and formate.

Electrosynthesis of Organonitrogen Compounds via Hydroxylamine-Mediated Cascade Reactions

Hydroxylamine (NH2OH) is a key intermediate in the formation of numerous high value-added organonitrogen compounds. The traditional synthesis of NH2OH requires the use of precious metals under high temperature conditions, which leads to high cost, high energy consumption, and environmental pollution. The NH2OH-mediated cascade reaction integrates the electrochemical synthesis of NH2OH and the chemical synthesis of organonitrogen compounds, offering a facile, green, and efficient alternative. This review presents the recent advances on electrosynthesis of high value-added organonitrogen compounds by NH2OH-mediated cascade reactions. We present key concepts and the transformation process of different N-species to NH2OH, discuss suitable substrates and electrocatalysts, and elucidate the reaction mechanisms involved in generating compounds such as amino acids, cyclohexanone oxime, urea, amine, etc.. Finally, we address current challenges and future directions in this emerging field to encourage further research effort and the development of NH2OH-mediated cascade reaction.

MoCx/CoP Janus Structure Embedded Carbon Frame for Boosting Hydrazine Oxidation and Hydrogen Evolution Reactions

The integration of hydrazine electrooxidation (HzOR) and hydrogen evolution reaction (HER) presents an efficient pathway for high-purity hydrogen production. However, developing bifunctional catalysts remains challenging for the demands of multiple active-centers and tailored electronic properties. Here, a unique Janus nano-catalysts of MoCx/CoP embedded on carbon frameworks (MoCx/CoP@C) is introduced, featuring dual electronic states (depletion and accumulation)driven by charge redistribution within MoCx/CoP, acting as dual active-sites (DAS) for both HER and HzOR. Theoretical analysis reveals these independent DAS in MoCx/CoP significantly enhance catalytic activity for both HER and HzOR. Specifically, accumulated electrons at MoCx/CoP interfaces weaken the bonding strength of N-H in N2H4, thereby decreasing dehydrogenation energy barrier while electronic-deficient Mo sites within MoCx accelerate H* desorption, thus promoting HER kinetics. This catalyst exhibits ultra-low potential of -73 mV at 10 mA cm-2 for anodic HzOR, comparable to noble catalysts and low overpotential of 95 mV at 10 mA cm-2 for cathodic HER. When employed in an overall hydrazine splitting (OHzS) system, MoCx/CoP@C shows promising commercial potential, with low energy consumption (0.16 V), high Faradaic efficiency (95.4%) and long-term stability. This study underscores the feasibility of designing independent DAS catalysts and elucidates the mechanistic origins of bifunctional activities.

Solar-Driven Sulfide Oxidation Paired With CO2 Reduction Based on Vacancies Engineering of Copper Selenide

Photovoltaic-driven electrochemical (PV-EC) carbon dioxide reduction (CO2R) coupled with sulfide oxidation (SOR) can efficiently convert the solar energy into chemical energy, expanding its applications. However, developing low-cost electrocatalysts that exhibit high selectivity and efficiency for both CO2R and SOR remains a challenge. Herein, a bifunctional copper selenide catalyst is developed with copper vacancies (v-CuSe2) for the CO2R-SOR. The Faradaic efficiency (FE) of 62.4% for methane at -200 mA cm-2 is achieved in the cathodic CO2R. In a two-electrode CO2R-SOR system with 16 h of long-term operation at a current density of 200 mA cm-2, an average Faradaic efficiency of 57.2% for methane and 97.7% for sulfur powder generation is achieved at cathode and anode, respectively. Compared to the coupling of CO2R with oxygen evolution reaction (OER), the energy efficiency (EE) of the CO2R-SOR system can be increased to 22.9%. The mechanism study has found that the synergistic effect of copper vacancies and introduced Se significantly enhances the selectivity toward methane. Driven by silicon solar cells, a solar-to-methane conversion efficiency of 2% is achieved.

Recent Advances and Perspectives on Coupled Water Electrolysis for Energy-Saving Hydrogen Production

Overall water splitting (OWS) to produce hydrogen has attracted large attention in recent years due to its ecological-friendliness and sustainability. However, the efficiency of OWS has been forced by the sluggish kinetics of the four-electron oxygen evolution reaction (OER). The replacement of OER by alternative electrooxidation of small molecules with more thermodynamically favorable potentials may fundamentally break the limitation and achieve hydrogen production with low energy consumption, which may also be accompanied by the production of more value-added chemicals than oxygen or by electrochemical degradation of pollutants. This review critically assesses the latest discoveries in the coupled electrooxidation of various small molecules with OWS, including alcohols, aldehydes, amides, urea, hydrazine, etc. Emphasis is placed on the corresponding electrocatalyst design and related reaction mechanisms (e.g., dual hydrogenation and N-N bond breaking of hydrazine and C═N bond regulation in urea splitting to inhibit hazardous NCO- and NO- productions, etc.), along with emerging alternative electrooxidation reactions (electrooxidation of tetrazoles, furazans, iodide, quinolines, ascorbic acid, sterol, trimethylamine, etc.). Some new decoupled electrolysis and self-powered systems are also discussed in detail. Finally, the potential challenges and prospects of coupled water electrolysis systems are highlighted to aid future research directions.

Hollow Mo/MoSVn Nanoreactors with Tunable Built-in Electric Fields for Sustainable Hydrogen Production

Constructing built-in electric field (BIEF) in heterojunction catalyst is an effective way to optimize adsorption/desorption of reaction intermediates, while its precise tailor to achieve efficient bifunctional electrocatalysis remains great challenge. Herein, the hollow Mo/MoSVn nanoreactors with tunable BIEFs are elaborately prepared to simultaneously promote hydrogen evolution reaction (HER) and urea oxidation reaction (UOR) for sustainable hydrogen production. The BIEF induced by sulfur vacancies can be modulated from 0.79 to 0.57 to 0.42 mV nm-1, and exhibits a parabola-shaped relationship with HER and UOR activities, the Mo/MoSV1 nanoreactor with moderate BIEF presents the best bifunctional activity. Theoretical calculations reveal that the moderate BIEF can evidently facilitate the hydrogen adsorption/desorption in the HER and the breakage of N─H bond in the UOR. The electrolyzer assembled with Mo/MoSV1 delivers a cell voltage of 1.49 V at 100 mA cm-2, which is 437 mV lower than that of traditional water electrolysis, and also presents excellent durability at 200 mA cm-2 for 200 h. Life cycle assessment indicates the HER||UOR system possesses notable superiority across various environment impact and energy consumption. This work can provide theoretical and experimental direction on the rational design of advanced materials for energy-saving and eco-friendly hydrogen production.

Asymmetric Rh-O-Co bridge sites enable superior bifunctional catalysis for hydrazine-assisted hydrogen production

Hydrazine-assisted water splitting is a promising strategy for energy-efficient hydrogen production, yet challenges remain in developing effective catalysts that can concurrently catalyze both the hydrogen evolution reaction (HER) and hydrazine oxidation reaction (HzOR) in acidic media. Herein, we report an effective bifunctional catalyst consisting of Rh clusters anchored on Co3O4 branched nanosheets (Rh-Co3O4 BNSs) synthesized via an innovative arginine-induced strategy. The Rh-Co3O4 BNSs exhibit unique Rh-O-Co interfacial sites that facilitate charge redistribution between Rh clusters and the Co3O4 substrate, thereby optimizing their valence electronic structures. When the current density reaches 10 mA cm-2, the Rh-Co3O4 BNSs require working potentials of only 32 mV for the HER and 0.26 V for the HzOR, far surpassing commercial Pt/C. Furthermore, the Rh-Co3O4 BNSs can work efficiently for hydrazine-assisted water electrolysis with a low voltage of 0.34 V at 10 mA cm-2 and excellent stability. Theoretical calculations reveal that the optimized valence electronic structure within interfacial Rh-O-Co sites not only reduces the adsorption energy barrier of Co3O4 for H* in the HER; but also optimizes the hydrazine adsorption in the HzOR and lowers the free energy change in the potential-determining step, where the facilitated dehydrogenation is observed in in situ Raman spectra. This work provides a viable approach for designing efficient bifunctional catalysts for future hydrazine-assisted hydrogen production.

Advanced systems for enhanced CO2 electroreduction

Carbon dioxide (CO2) electroreduction has extraordinary significance in curbing CO2 emissions while simultaneously producing value-added chemicals with economic and environmental benefits. In recent years, breakthroughs in designing catalysts, optimizing intrinsic activity, developing reactors, and elucidating reaction mechanisms have continuously driven the advancement of CO2 electroreduction. However, the industrialization of CO2 electroreduction remains a challenging task, with high energy consumption, high costs, limited reaction products, and restricted application scenarios being the issues that urgently need to be addressed. To accelerate the progress of CO2 electroreduction towards practical application, this review shifts the research focus from catalysts to aspects such as reactions and systems, aiming to improve reaction efficiency, reduce technical costs, expand the range of products, and enhance selectivity, offering readers a new perspective. In particular, innovative and specific design strategies such as CO2 reduction coupled with alternative oxidation, co-reduction reaction of CO2 and C/N/O/S-containing species, cascade systems, and integrated CO2 capture and reduction systems are discussed in detail. Additionally, personal views on the opportunities and future challenges of the aforementioned innovative strategies are provided, offering new insights for the future research and development of CO2 electroreduction.

Photothermal Assisted Biomass Oxidation for Pairing Carbon Dioxide Electroreduction with Low Cell Potential

Integrating anodic biomass valorization with carbon dioxide electroreduction (CO2RR) can produce value-added chemicals on both the cathode and anode; however, anodic oxidation still suffers from high overpotential. Herein, a photothermal-assisted method was developed to reduce the potential of 5-hydroxymethyl furfural (HMF) electrooxidation. Capitalizing on the copious oxygen vacancies, defective Co3O4 (D-Co3O4) exhibited a stronger photothermal effect, delivering a local temperature of 175.47 °C under near infrared light illumination. The photothermal assistance decreased the oxidation potential of HMF from 1.7 V over pristine Co3O4 to 1.37 V over D-Co3O4 to achieve a target current density of 30 mA cm-2, with 2,5-furandicarboxylic acid as the primary product. Mechanistic analysis disclosed that the photothermal effect did not change the HMF oxidation route but greatly enhanced the adsorption capacity of HMF. Meanwhile, faster electron transfer for direct HMF oxidation and the surface conversion to cobalt (oxy)hydroxide, which contributed to indirect HMF oxidation, was observed. Thus, rapid HMF conversion was realized, as evidenced by in situ surface-enhanced infrared spectroscopy. Upon coupling cathodic CO2RR with an atomically dispersed Ni-N/C catalyst, the Faradaic efficiencies of CO (cathode) and 2,5-furandicarboxylic acid (FDCA, anode) exceeded 90.0 % under a low cell potential of 1.77 V.

Vanadium-regulated nickel phosphide nanosheets for electrocatalytic sulfion upgrading and hydrogen production

The electrochemical sulfion oxidation reaction (SOR) is highly desirable to treat sulfion-rich wastewater and achieve energy-saving hydrogen production when coupled with the cathodic hydrogen evolution reaction (HER). Herein, we propose a thermodynamically favorable SOR to couple with the HER, and develop vanadium-doped nickel phosphide (V-Ni2P) nanosheets for simultaneously achieving energy-efficient hydrogen production and sulfur recovery. V doping can efficiently adjust the electronic structure and improve intrinsic activity of Ni2P, which exhibits outstanding electrocatalytic performances for the HER and SOR with low potentials of -0.093 and 0.313 V to afford 10 mA cm-2. Remarkably, the assembled V-Ni2P-based hybrid water electrolyzer coupling the HER with the SOR requires small cell voltages of 0.389 and 0.834 V at 10 and 300 mA cm-2, lower than those required in a traditional water electrolysis system (1.5 and 1.969 V), realizing low-cost sulfion upgrading to value-added sulfur and hydrogen generation. This work provides an approach for energy-saving hydrogen production and toxic waste degradation.

Harnessing the Unconventional Cubic Phase in 2D LaNiO3 Perovskite for Highly Efficient Urea Oxidation

Phase engineering is a critical strategy in electrocatalysis, as it allows for the modulation of electronic, geometric, and chemical properties to directly influence the catalytic performance. Despite its potential, phase engineering remains particularly challenging in thermodynamically stable perovskites, especially in a 2D structure constraint. Herein, we report phase engineering in 2D LaNiO3 perovskite using the strongly non-equilibrium microwave shock method. This approach enables the synthesis of conventional hexagonal and unconventional trigonal and cubic phases in LaNiO3 by inducing selective phase transitions at designed temperatures, followed by rapid quenching to allow precise phase control while preserving the 2D porous structure. These phase transitions induce structural distortions in the [LaO]+ layers and the hybridization between Ni 3d and O 2p states, modifying local charge distribution and enhancing electron transport during the six-electron urea oxidation process (UOR). The cubic LaNiO3 offers optimal electron transport and active site accessibility due to its high structural symmetry and open interlayer spacing, resulting in a low onset potential of 1.27 V and a Tafel slope of 33.1 mV dec-1 for UOR, outperforming most current catalysts. Our strategy features high designability in phase engineering, enabling various electrocatalysts to harness the power of unconventional phases.

Achieving Excess Hydrogen Output via Concurrent Electrochemical and Chemical Redox Reactions on P-Doped Co-Based Catalysts with Electron Manipulation and Kinetic Regulation

Electrolytic hydrogen production is of great significance in energy conversion and sustainable development. Traditional electrolytic water splitting confronts high anode voltage with oxygen generation and the amount of hydrogen produced at cathode depends entirely on the quantity of electric charge input. Herein, excess hydrogen output can be achieved by constructing a spontaneous hydrazine oxidation reaction (HzOR) coupled hydrogen evolution reaction (HER) system. For the hydrazine oxidation-assisted electrolyzer in this work, both the external input electrons and the electrons produced by spontaneous chemical redox reaction can reduce water, producing more hydrogen than traditional electrolytic water splitting system. The ultrafast kinetics of bifunctional P-doped Co-based catalysts plays a key role in the spontaneous feature of HzOR/HER redox reaction and low working voltage of hydrazine oxidation-assisted electrolyzer (12 mV@100 mA cm-2). Theoretical calculation results and ex situ/in situ spectra demonstrate that doped P could optimize electronic structure, regulate adsorption energy of intermediates, and thus endows catalysts with ultrafast kinetics. This work provides a new pathway for the development of spontaneous oxidation-assisted hydrogen production, to achieve excess hydrogen output via concurrent electrochemical and chemical redox reactions.

Decoupled Water Reduction and Hydrazine Oxidation by Fast Proton Transport MoO3 Redox Mediator for Hydrogen Production

Water electrolysis powered by renewable energy is a green and sustainable method for hydrogen production. Decoupled water electrolysis with the aid of solid-state redox mediator could separate the hydrogen and oxygen production in time and space without the use of the membrane, showing high flexibility. Herein, a MoO3 electrode with fast proton transport property is employed as a solid-state redox mediator to construct a membrane-free decoupled acidic electrolytic system. The MoO3 electrode exhibits high specific capacity (204.3 mAh g-1 at 5 A g-1) and excellent rate performance (92.8 mAh g-1 at 150 A g-1) in the acidic environment. Due to the dense oxide-ion arrays, MoO3 still exhibits excellent performance under high mass-loading. In addition, a hybrid decoupled electrolysis system is also constructed by combining water reduction and hydrazine oxidation, which can not only generate high-purity H2 but also remove hydrazine hazards in acidic wastewater with lower energy consumption.

Manipulating Trimetal Catalytic Activities for Efficient Urea Electrooxidation-Coupled Hydrogen Production at Ampere-Level Current Densities

Replacing the oxygen evolution reaction (OER) with the urea oxidation reaction (UOR) in conjunction with the hydrogen evolution reaction (HER) offers a feasible and environmentally friendly approach for handling urea-rich wastewater and generating energy-saving hydrogen. However, the deactivation and detachment of active sites in powder electrocatalysts reported hitherto present significant challenges to achieving high efficiency and sustainability in energy-saving hydrogen production. Herein, a self-supported bimetallic nickel manganese metal-organic framework (NiMn-MOF) nanosheet and its derived heterostructure composed of NiMn-MOF decorated with ultrafine Pt nanocrystals (PtNC/NiMn-MOF) are rationally designed. By leveraging the synergistic effect of Mn and Ni, along with the strong electronic interaction between NiMn-MOF and PtNC at the interface, the optimized catalysts (NiMn-MOF and PtNC/NiMn-MOF) exhibit substantially reduced potentials of 1.459 and -0.129 V to reach 1000 mA cm-2 during the UOR and HER. Theoretical calculations confirm that Mn-doping and the heterointerface between NiMn-MOF and Pt nanocrystals regulate the d-band center of the catalyst, which in turn enhances electron transfer and facilitates charge redistribution. This manipulation optimizes the adsorption/desorption energies of the reactants and intermediates in both the HER and UOR, thereby significantly reducing the energy barrier of the rate-determining step (RDS) and enhancing the electrocatalytic performance. Furthermore, the urea degradation rates of PtNC/NiMn-MOF (96.1%) and NiMn-MOF (90.3%) are significantly higher than those of Ni-MOF and the most reported advanced catalysts. This work provides valuable insights for designing catalysts applicable to urea-rich wastewater treatment and energy-saving hydrogen production.

Electrodegradation of nitrogenous pollutants in sewage: from reaction fundamentals to energy valorization applications

The excessive accumulation of nitrogen pollutants (mainly nitrate, nitrite, ammonia nitrogen, hydrazine, and urea) in water bodies seriously disrupts the natural nitrogen cycle and poses a significant threat to human life and health. Electrolysis is considered a promising method to degrade these nitrogenous pollutants in sewage, with the advantages of high efficiency, wide generality, easy operability, retrievability, and environmental friendliness. For particular energy devices, including metal-nitrate batteries, direct fuel cells, and hybrid water electrolyzers, the realization of energy valorization from sewage purification processes (e.g., valuable chemical generation, electricity output, and hydrogen production) becomes feasible. Despite the progress in the research on pollutant electrodegradation, the development of electrocatalysts with high activity, stability, and selectivity for pollutant removal, coupled with corresponding energy devices, remains a challenge. This review comprehensively provides advanced insights into the electrodegradation processes of nitrogenous pollutants and relevant energy valorization strategies, focusing on the reaction mechanisms, activity descriptors, electrocatalyst design, and actuated electrodes and operation parameters of tailored energy conversion devices. A feasibility analysis of electrodegradation on real wastewater samples from the perspective of pollutant concentration, pollutant accumulation, and electrolyte effects is provided. Challenges and prospects for the future development of electrodegradation systems are also discussed in detail to bridge the gap between experimental trials and commercial applications.

Copper Sulfide based Photocatalysts, Electrocatalysts and Photoelectrocatalysts: Innovations in Structural Modulation and Application

Copper sulfides (CuxS, 1 ≤ x ≤ 2) are notable for their unique photoelectric properties and potential applications, particularly in photo/electrocatalysis. These materials are valued for their tunable band gap, near-infrared optical characteristics, and plasmonic resonance effects. However, challenges such as low catalytic activity and limited stability impede their practical applications. This review addresses these issues by exploring advanced strategies for electronic structure modulation, including atomic doping, shape alteration, heterojunction construction, and defect introduction to enhance catalytic efficiency. A detailed analysis of the optical and electrical properties of CuxS across various stoichiometric ratios and crystal structures is provided, offering a comprehensive overview of their applications in photocatalysis, electrocatalysis, and photo/electrocatalysis. Additionally, the review synthesizes current knowledge and highlights the potential of these strategies to optimize CuxS-based photo/electrocatalysts, proposing future research directions to bridge the gap between theoretical studies and practical applications. This work underscores the importance of CuxS in photo/electrocatalysis and aims to inspire further innovation and exploration in this field, emphasizing its significance in material science and engineering.

High-Entropy Sulfide Catalyst Boosts Energy-Saving Electrochemical Sulfion Upgrading to Thiosulfate Coupled with Hydrogen Production

Electrochemical sulfion oxidation reaction (SOR) offers a sustainable strategy for sulfion-rich wastewater treatment, which can couple with cathodic hydrogen evolution reaction (HER) for energy-saving hydrogen production. However, the corrosion and passivation of sulfur species render the inferior catalytic SOR performance, and the oxidation product, polysulfide, requires further acidification to recover cheap elementary sulfur. Here, we reported an amorphous high-entropy sulfide catalyst of CuCoNiMnCrSx nanosheets in situ growth on the nickel foam (CuCoNiMnCrSx/NF) for SOR, which achieved an ultra-low potential of 0.25 V to afford 100 mA cm-2, and stable electrolysis at as high as 1 A cm-2 for 100 h. These were endowed by the manipulated chemical environments surrounding Cu+ sites and the constructed "soft-acid" to "hard-acid" adsorption/desorption sites, enabling synergistically boosted adsorption/desorption process of sulfur species during SOR. Moreover, we developed an electrochemical-chemical tandem process to convert sulfions to value-added thiosulfate, providing a good choice for simultaneous wastewater utilization and hydrogen production.

Fe-Doped Ni3S2 Induces Self-Reconstruction for Urea-Assisted Water Electrolysis Enhancement

Urea oxidation reaction (UOR) is an attractive alternative anodic reaction to oxygen evolution reaction (OER) for its low thermodynamic potential (0.37 V vs RHE). A major challenge that prohibits its practical application is the six-electron transfer process during UOR, demanding enhancements in the catalytic activity. Herein, a Fe-doped Ni3S2 catalyst with a uniform flower-like structure is synthesized in situ on nickel foam via a simple one-step hydrothermal method. The electrochemical properties of Fe-Ni3S2 are significantly improved since a current density of 10 mA cm-2 only requires a 1.33 V potential and remains stable for 60 h. The structural characterization demonstrates a strong interaction between Fe and Ni3S2. After Fe doping, the active site increases, which promotes the formation of NiOOH on the catalyst surface, thus speeding up the UOR process. These changes are beneficial to charge transfer and optimize the adsorption energy of the intermediates. In situ EIS further confirms that Fe promotes electron transfer during the UOR process, reduces the interface resistance between the catalyst and the electrolyte, and lowers the driving voltage.

Substituent tuning of Cu coordination polymers enables carbon-efficient CO2 electroreduction to multi-carbon products

CO2 electroreduction is a potential pathway to achieve net-zero emissions in the chemical industry. Yet, CO2 loss, resulting from (bi)carbonate formation, renders the process energy-intensive. Acidic environments can address the issue but at the expense of compromised product Faradaic efficiencies (FEs), particularly for multi-carbon (C2+) products, as rapid diffusion and migration of protons (H+) favors competing H2 and CO production. Here, we present a strategy of tuning the 2-position substituent length on benzimidazole (BIM)-based copper (Cu) coordination polymer (CuCP) precatalyst - to enhance CO2 reduction to C2+ products in acidic environments. Lengthening the substituent from H to nonyl enhances H+ diffusion retardation and decreases Cu-Cu coordination numbers (CNs), favoring further reduction of CO. This leads to a nearly 24× enhancement of selectivity towards CO hydrogenation and C-C coupling at 60 mA cm-2. We report the highest C2+ product FE of more than 70% at 260 mA cm-2 on pentyl-CuCP and demonstrate a CO2-to-C2+ single-pass conversion (SPC) of ~54% at 180 mA cm-2 using pentyl-CuCP in zero-gap electrolyzers.

Energy-Saving Ambient Electrosynthesis of Nylon-6 Precursor Coupled with Electrocatalytic Upcycling of Polyethylene Terephthalate

Cyclohexanone oxime is an important intermediate in the chemical industry, especially for the manufacture of nylon-6. The traditional cyclohexanone oxime production strongly relies on cyclohexanone-hydroxylamine and cyclohexanone ammoxidation processes, which require harsh reaction conditions and consume considerable amounts of energy. Herein, direct electrosynthesis of cyclohexanone oxime is reported from environmental pollutants nitrite and cyclohexanone with almost 100% yield by using low-cost Cu2Se nanosheets as electrocatalysts. Combination of in situ Fourier transform infrared spectroscopy and theoretical calculations verifies that the p-d orbital hybridization between Cu and Se elements could synergistically optimize the surface electronic structure and enable improved adsorption and formation of the key active N intermediate NH2OH*, thereby enhancing cyclohexanone/nitrite-to-cyclohexanone oxime conversion over the Cu2Se nanosheets. Based on these, an efficient asymmetric co-electrolysis system is further demonstrated by coupling cyclohexanone/nitrite-to-cyclohexanone oxime conversion with the upcycling of polyethylene terephthalate plastics, achieveing energy-saving simultaneously production of value-added products (cyclohexanone oxime and glycolic acid).

Ru nanocrystals modified porous FeOOH nanostructures with open 3D interconnected architecture supported on NiFe foam as high-performance electrocatalyst for oxygen evolution reaction and electrocatalytic urea oxidation

The construction of binder-free electrodes with well-defined three-dimensional (3D) morphology and optimized electronic structure represents an efficient strategy for the design of high-performance electrocatalysts for the development of efficient green hydrogen technologies. Herein, Ru nanocrystals were modified on 3D interconnected porous FeOOH nanostructures with open network-like frameworks on NiFe foam (Ru/FeOOH@NFF), which were used as an efficient electrocatalyst. In this study, a 3D interconnected porous FeOOH with an open network structure was first electrodeposited on NiFe foam and served as the support for the in-situ modification of Ru nanocrystals. Subsequently, the Ru nanocrystals and abundant oxygen vacancies were simultaneously incorporated into the FeOOH matrix via the adsorption-reduction method, which involved NaBH4 reduction. The Ru/FeOOH@NFF electrocatalyst shows a large specific surface area, abundant oxygen vacancies, and modulated electronic structure, which collectively result in a significant enhancement of catalytic properties with respect to the oxygen evolution reaction (OER) and urea oxidation reaction (UOR). The Ru/FeOOH@NFF catalyst exhibits an outstanding OER performance, requiring a low overpotential (360 mV) at 200 mA cm-2 with a small Tafel slope (58 mV dec-1). Meanwhile, the Ru/FeOOH@NFF catalyst demonstrates more efficient UOR activity for achieving 200 mA cm-2 at a lower overpotential of 272 mV. Furthermore, an overall urea electrolysis cell using the Ru/FeOOH@NFF as the anode and Pt as the cathode (Ru/FeOOH@NFF||Pt) reveals a cell voltage of 1.478 V at 10 mA cm-2 and a prominent durability (120 h at 50 mA cm-2). This work will provide a valuable understanding of the construction of high-performance electrocatalysts with 3D microstructure for promoting urea-assisted water electrolysis.

Stability of electrocatalytic OER: from principle to application

Hydrogen energy, derived from the electrolysis of water using renewable energy sources such as solar, wind, and hydroelectric power, is considered a promising form of energy to address the energy crisis. However, the anodic oxygen evolution reaction (OER) poses limitations due to sluggish kinetics. Apart from high catalytic activity, the long-term stability of electrocatalytic OER has garnered significant attention. To date, several research studies have been conducted to explore stable electrocatalysts for the OER. A comprehensive review is urgently warranted to provide a concise overview of the recent advancements in the electrocatalytic OER stability, encompassing both electrocatalyst and device developments. This review aims to succinctly summarize the primary factors influencing OER stability, including morphological/phase change and electrocatalyst dissolution, as well as mechanical detachment, alongside chemical, mechanical, and operational degradation observed in devices. Furthermore, an overview of contemporary approaches to enhance stability is provided, encompassing electrocatalyst design (structural regulation, protective layer coating, and stable substrate anchoring) and device optimization (bipolar plates, gas diffusion layers, and membranes). Hopefully, more attention will be paid to ensuring the stable operation of electrocatalytic OER and the future large-scale water electrolysis applications. This review presents design principles aimed at addressing challenges related to the stability of electrocatalytic OER.

Carbonate-carbonate coupling on platinum surface promotes electrochemical water oxidation to hydrogen peroxide

Water electro-oxidation to form H2O2 is an important way to produce H2O2 which is widely applied in industry. However, its mechanism is under debate and HO(ads), hydroxyl group adsorbed onto the surface of the electrode, is regarded as an important intermediate. Herein, we study the mechanism of water oxidation to H2O2 at Pt electrode using in-situ Raman spectroscopy and differential electrochemical mass spectroscopy and find peroxide bond mainly originated from the coupling of two CO32- via a C2O62- intermediate. By quantifying the 18O isotope in the product, we find that 93% of H2O2 was formed via the CO32- coupling route and 7% of H2O2 is from OH(ads)-CO3•- route. The OH(ads)-OH(ads) coupling route has a negligible contribution. The comparison of various electrodes shows that the strong adsorption of CO3(ads) at the electrode surface is essential. Combining with a commercial cathode catalyst to produce H2O2 during oxygen reduction, we assemble a flow cell in which the cathode and anode simultaneously produce H2O2. It shows a Faradaic efficiency of 150% of H2O2 at 1 A cm-2 with a cell voltage of 2.3 V.

Wood-Structured Nanomaterials as Highly Efficient, Self-Standing Electrocatalysts for Water Splitting

Electrocatalytic water splitting (EWS) driven by renewable energy is widely considered an environmentally friendly and sustainable approach for generating hydrogen (H2), an ideal energy carrier for the future. However, the efficiency and economic viability of large-scale water electrolysis depend on electrocatalysts that can efficiently accelerate the electrochemical reactions taking place at the two electrodes. Wood-derived nanomaterials are well-suited for serving as EWS catalysts because of their hierarchically porous structure with high surface area and low tortuosity, compositional tunability, cost-effectiveness, and self-standing integral electrode configuration. Here, recent advancements in the design and synthesis of wood-structured nanomaterials serving as advanced electrocatalysts for water splitting are summarized. First, the design principles and corresponding strategies toward highly effective wood-structured electrocatalysts (WSECs) are emphasized. Then, a comprehensive overview of current findings on WSECs, encompassing diverse structural designs and functionalities such as supported-metal nanoparticles (NPs), single-atom catalysts (SACs), metal compounds, and heterostructured electrocatalysts based on engineered wood hosts are presented. Subsequently, the application of these WSECs in various aspects of water splitting, including the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), overall water splitting (OWS), and hybrid water electrolysis (HWE) are explored. Finally, the prospects, challenges, and opportunities associated with the broad application of WSECs are briefly discussed. This review aims to provide a comprehensive understanding of the ongoing developments in water-splitting catalysts, along with outlining design principles for the future development of WSECs.

Bifunctional PdMoPt trimetallene boosts alcohol-water electrolysis

Substituting oxygen evolution with alcohol oxidation is crucial for enhancing the cathodic hydrogen evolution reaction (HER) at low voltages. However, the development of high-performance bifunctional catalysts remains a challenge. In this study, an ultrathin and porous PdMoPt trimetallene is developed using a wet-chemical strategy. The synergetic effect between alloying metals regulates the adsorption energy of reaction intermediates, resulting in exceptional activity and stability for the electrooxidation of various alcohols. Specifically, the mass activity of PdMoPt trimetallene toward the electrooxidation of methanol, ethylene glycol, and glycerol reaches 6.13, 5.5, and 4.37 A mgPd+Pt -1, respectively. Moreover, the catalyst demonstrates outstanding HER activity, requiring only a 39 mV overpotential to achieve 10 mA cm-2. By employing PdMoPt trimetallene as both the anode and cathode catalyst, we established an alcohol-water hybrid electrolysis system, significantly reducing the voltage requirements for hydrogen production. This work presents a promising avenue for the development of bifunctional catalysts for energy-efficient hydrogen production.

Cobalt telluride regulated by nickel for efficient electrooxidation of 5-hydroxymethylfurfural

Replacing the anodic oxygen evolution reaction (OER) in water splitting with 5-hydroxymethylfurfural oxidation reaction (HMFOR) can not only reduce the energy required for hydrogen production but also yield the valuable chemical 2,5-furandicarboxylic acid (FDCA). Co-based catalysts are known to be efficient for HMFOR, with high-valent Co being recognized as the main active component. However, efficiently promoting the oxidation of Co2+ to produce high-valent reactive species remains a challenge. In this study, Ni-doped CoTe (CoNiTe) nanorods were prepared as efficient catalysts for HMFOR, achieving a high HMFOR current density of 65.3 mA cm-2 at 1.50 V. Even after undergoing five successive electrolysis processes, the Faradaic efficiency (FE) remained at approximately 90.7 %, showing robust electrochemical durability. Mechanistic studies indicated that Ni doping changes the electronic configuration of Co, enhancing its charge transfer rate and facilitating the oxidation of Co2+ to high-valent CoO2 species. This work reveals the effect of Ni doping on the reconfiguration of the active phase during HMFOR.

Scale-Up, Continuous and Low-Temperature Production of Multimetal Based Electrocatalysts toward Water Electrolysis

Electrocatalytic water splitting is a crucial strategy for advancing hydrogen energy and addressing the global energy crisis. Despite its significance, the need for a straightforward and swift method to synthesize electrocatalysts with exceptional performance remains pressing. In this study, we demonstrate a novel approach for the preparation of multimetal-based electrocatalysts in a continuous flow reactor, enabling the quick synthesis of a large number of products through a streamlined process. The resultant NiFe-LDH comprises nanoflakes with a high specific surface area and requires only 255.4 mV overpotential to achieve a current density of 10 mA·cm-2 in 1 M KOH, surpassing samples fabricated by conventional hydrothermal methods. Our method can also be applied to craft a spectrum of other multimetal-based electrocatalysts, including CoFe-LDH, CoAl-LDH, NiMn-LDH, and NiCoFe-LDH. Additionally, the NiFe-LDH electrocatalyst is further applied to anodic methanol electrooxidation coupled with cathodic hydrogen evolution. Moreover, the simplicity and generality of our fabrication method render it applicable for the facile preparation of various multimetal-based electrocatalysts, offering a scalable solution to the quest for high-performance catalysts in advancing sustainable energy technologies.

Rational Construction of Honeycomb-like Carbon Network-Encapsulated MoSe2 Nanocrystals as Bifunctional Catalysts for Highly Efficient Water Splitting

The scalable fabrication of cost-efficient bifunctional catalysts with enhanced hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance plays a significant role in overall water splitting in hydrogen production fields. MoSe2 is considered to be one of the most promising candidates because of its low cost and high catalytic activity. Herein, hierarchical nitrogen-doped carbon networks were constructed to enhance the catalytic activity of the MoSe2-based materials by scalable free-drying combined with an in situ selenization strategy. The rationally designed carbonaceous network-encapsulated MoSe2 composite (MoSe2/NC) endows a continuous honeycomb-like structure. When utilized as a bifunctional electrocatalyst for both HER and OER, the MoSe2/NC electrode exhibits excellent electrochemical performance. Significantly, the MoSe2/NC‖MoSe2/NC cells require a mere 1.5 V to reach a current density of 10 mA cm-2 for overall water splitting in 1 M KOH. Ex situ characterizations and electrochemical kinetic analysis reveal that the superior catalytic performance of the MoSe2/NC composite is mainly attributed to fast electron and ion transportation and good structural stability, which is derived from the abundant active sites and excellent structural flexibility of the honeycomb-like carbon network. This work offers a promising pathway to the scalable fabrication of advanced non-noble bifunctional electrodes for highly efficient hydrogen evolution.

Pt1.8Pd0.2CuGa Intermetallic Nanocatalysts with Enhanced Methanol Oxidation Performance for Efficient Hybrid Seawater Electrolysis

Seawater electrolysis is a potentially cost-effective approach to green hydrogen production, but it currently faces substantial challenges for its high energy consumption and the interference of chlorine evolution reaction (ClER). Replacing the energy-demanding oxygen evolution reaction with methanol oxidation reaction (MOR) represents a promising alternative, as MOR occurs at a significantly low anodic potential, which cannot only reduce the voltage needed for electrolysis but also completely circumvents ClER. To this end, developing high-performance MOR catalysts is a key. Herein, a novel quaternary Pt1.8Pd0.2CuGa/C intermetallic nanoparticle (i-NP) catalyst is reported, which shows a high mass activity (11.13 A mgPGM -1), a large specific activity (18.13 mA cmPGM -2), and outstanding stability toward alkaline MOR. Advanced characterization and density functional theory calculations reveal that the introduction of atomically distributed Pd in Pt2CuGa intermetallic markedly promotes the oxidation of key reaction intermediates by enriching electron concentration around Pt sites, resulting in weak adsorption of carbon-containing intermediates and favorable adsorption of synergistic OH- groups near Pd sites. MOR-assisted seawater electrolysis is demonstrated, which continuously operates under 1.23 V for 240 h in simulated seawater and 120 h in natural seawater without notable degradation.

Anodic Reactions in Alkaline Hybrid Water Electrolyzers: Activity versus Selectivity

Affordable and abundant sources of green hydrogen can give a large impetus to the Energy Transition. While conventional water electrolysis has positioned itself as a prospective candidate for this purpose, it lacks cost competitiveness. Hybrid water electrolysis (HWE) has been praised for its ability to address the issues of conventional water electrolysis due to its decreased energy requirements and its ability to generate value-added products, among other advantages. In this perspective, we discuss the challenges related to the applicability of HWE, using the glycerol oxidation reaction as an example, and we identify pitfalls often found in the literature. Reported catalysts, especially those based on abundant materials, suffer from a severe selectivity-activity tradeoff, hampering their industrial applicability due to large costs associated with product separation and purification. Additionally, testing electrocatalysts under conditions that are relevant for their applications is encouraged, yet these conditions are largely unknown, as in-depth knowledge of the catalytic mechanisms is largely missing. Lastly, an opportunity to increase the amount of interdisciplinary research concerning both the engineering requirements and financial performance of HWE is discussed. Increased focus on these objectives may boost the development of HWE on an industrial scale.

Regulating Mo-based alloy-oxide active interfaces for efficient alkaline hydrogen evolution assisted by hydrazine oxidation

Improving the efficiency of overall water splitting (OWS) is crucial due to the slow four-electron transfer process in the oxygen evolution reaction (OER). The coupling of the thermodynamically favorable hydrazine oxidation reaction (HzOR) with the hydrogen evolution reaction (HER) significantly boosts hydrogen production. A Ru-decorated MoNi/MoO2 micropillar (Ru-MoNi/MoO2) has been synthesized using a hydrothermal followed by reduction annealing. Benefiting from Ru moderating the active interface of Mo-based alloys/oxides and the unique one-dimensional micropillar morphology. The synthesized Ru-MoNi/MoO2 exhibits outstanding bifunctional activity for HER and HzOR, achieving 10 mA cm-2 at merely -13 mV and -34 mV in 1 M KOH and 1 M KOH + 0.5 M N2H4, respectively. Notably, with Ru-MoNi/MoO2 in a dual-electrode setup, only 0.57 V is needed to achieve 50 mA cm-2, demonstrating good stability and facilitating hydrazine-assisted water splitting (OHzS). This work offers insights into the modulation of alloy/metal oxide active interfaces, contributing to the development of efficient bifunctional catalysts for HER and HzOR.

Laser-Synthesized Co-Doped CuO Electrocatalyst: Unveiling Boosted Methanol Oxidation Kinetics for Enhanced Hydrogen Production Efficiency by In Situ/Operando Raman and Theoretical Analyses

The present study details the strategic development of Co-doped CuO nanostructures via sophisticated and expedited pulsed laser ablation in liquids (PLAL) technique. Subsequently, these structures are employed as potent electrocatalysts for the anodic methanol oxidation reaction (MOR), offering an alternative to the sluggish oxygen evolution reaction (OER). Electrochemical assessments indicate that the Co-CuO catalyst exhibits exceptional MOR activity, requiring a reduced potential of 1.42 V at 10 mA cm-2 compared to that of pure CuO catalyst (1.57 V at 10 mA cm-2). Impressively, the Co-CuO catalyst achieved a nearly 180 mV potential reduction in MOR compared to its OER performance (1.60 V at 10 mA cm-2). Furthermore, when pairing Co-CuO(+)ǀǀPt/C(-) in methanol electrolysis, the cell voltage required is only 1.51 V at 10 mA cm-2, maintaining remarkable stability over 12 h. This represents a substantial voltage reduction of ≈160 mV relative to conventional water electrolysis (1.67 V at 10 mA cm-2). Additionally, both in situ/operando Raman spectroscopy studies and theoretical calculations have confirmed that Co-doping plays a crucial role in enhancing the activity of the Co-CuO catalyst. This research introduces a novel synthetic approach for fabricating high-efficiency electrocatalysts for large-scale hydrogen production while co-synthesizing value-added formic acid.

A Coordination-Derived Cerium-Based Amorphous-Crystalline Heterostructure with High Electrocatalytic Oxygen Evolution Activity

The rational design of heterogeneous catalysts is crucial for achieving optimal physicochemical properties and high electrochemical activity. However, the development of new amorphous-crystalline heterostructures is significantly more challenging than that of the existing crystalline-crystalline heterostructures. To overcome these issues, a coordination-assisted strategy that can help fabricate an amorphous NiO/crystalline NiCeOx (a-NiO/c-NiCeOx) heterostructure is reported herein. The coordination geometry of the organic ligands plays a pivotal role in permitting the formation of coordination polymers with high Ni contents. This consequently provides an opportunity for enabling the supersaturation of Ni in the NiCeOx structure during annealing, leading to the endogenous spillover of Ni from the depths of NiCeOx to its surface. The resulting heterostructure, featuring strongly coupled amorphous NiO and crystalline NiCeOx, exhibits harmonious interactions in addition to low overpotentials and high catalytic stability in the oxygen evolution reaction (OER). Theoretical calculations prove that the amorphous-crystalline interfaces facilitate charge transfer, which plays a critical role in regulating the local electron density of the Ni sites, thereby promoting the adsorption of oxygen-based intermediates on the Ni sites and lowering the dissociation-related energy barriers. Overall, this study underscores the potential of coordinating different metal ions at the molecular level to advance amorphous-crystalline heterostructure design.

Unlocking Efficient Hydrogen Production: Nucleophilic Oxidation Reactions Coupled with Water Splitting

Electrocatalytic water splitting driven by sustainable energy is a clean and promising water-chemical fuel conversion technology for the production of high-purity green hydrogen. However, the sluggish kinetics of anodic oxygen evolution reaction (OER) pose challenges for large-scale hydrogen production, limiting its efficiency and safety. Recently, the anodic OER has been replaced by a nucleophilic oxidation reaction (NOR) with biomass as the substrate and coupled with a hydrogen evolution reaction (HER), which has attracted great interest. Anode NOR offers faster kinetics, generates high-value products, and reduces energy consumption. By coupling NOR with hydrogen evolution reaction, hydrogen production efficiency can be enhanced while yielding high-value oxidation products or degrading pollutants. Therefore, NOR-coupled HER hydrogen production is another new green electrolytic hydrogen production strategy after electrolytic water hydrogen production, which is of great significance for realizing sustainable energy development and global decarbonization. This review explores the potential of nucleophilic oxidation reactions as an alternative to OER and delves into NOR mechanisms, guiding future research in NOR-coupled hydrogen production. It assesses different NOR-coupled production methods, analyzing reaction pathways and catalyst effects. Furthermore, it evaluates the role of electrolyzers in industrialized NOR-coupled hydrogen production and discusses future prospects and challenges. This comprehensive review aims to advance efficient and economical large-scale hydrogen production.

Modulating Ni-S coordination in Ni3S2 to promote electrocatalytic oxidation of 5-hydroxymethylfurfural at ampere-level current density

Electricity-driven oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) is a highly attractive strategy for biomass transformation. However, achieving industrial-grade current densities remains a great challenge. Herein, by modulating the water content in a solvothermal system, Ni3S2/NF with stabilized and shorter Ni-S bonds as well as a tunable coordination environment of Ni sites was fabricated. The prepared Ni3S2/NF was highly efficient for electrocatalytic oxidation of HMF to produce FDCA, and the FDCA yield and Faraday efficiency could reach 98.8% and 97.6% at the HMF complete conversion. More importantly, an industrial-grade current density of 1000 mA cm-2 could be achieved at a potential of only 1.45 V vs. RHE for HMFOR and the current density could exceed 500 mA cm-2 with other bio-based compounds as the reactants. The excellent performance of Ni3S2/NF originated from the shorter Ni-S bonds and its better electrochemical properties, which significantly promoted the dehydrogenation step of oxidizing HMF. Besides, the gram-scale FDCA production could be realized on Ni3S2/NF in a MEA reactor. This work provides a robust electrocatalyst with high potential for practical applications for the electrocatalytic oxidation of biomass-derived compounds.

Manipulating Dual-Metal Catalytic Activities toward Organic Upgrading in Upcycling Plastic Wastes with Inhibited Oxygen Evolution

Electrorefinery of polybutylene terephthalate (PBT) waste plastic, specifically conversion of a PBT-derived 1,4-butanediol (BDO) monomer into value-added succinate coupled with H2 production, emerges as an auspicious strategy to mitigate severe plastic pollution. Herein, we report the synthesis of Mn-doped NiNDA nanosheets (NDA: 2,6-naphthalenedicarboxylic acid), a metal-organic framework (MOF) through a ligand exchange method, and its utilization for electrocatalytic BDO oxidation to succinate. Interestingly, the transformation of doped layered-hydroxide (d-LH) precursors to MOF promotes BDO oxidation while hindering the competitive oxygen evolution reaction. Experimental and theoretical results indicate that the MOF has a higher affinity (i.e., alcoholophilic) for BDO than the d-LH, while Mn doping into NiNDA results in electron accumulation at Ni sites with an upward shift in the d-band center and convenient spin-dependent charge transfer, which are all beneficial for BDO oxidation. The as-constructed two-electrode membrane-electrode assembly (MEA) flow cell, by coupling BDO oxidation and hydrogen evolution reaction, attains an industrial current density of 1.5 A cm-2@1.82 V at 50 °C, corresponding to a specific energy consumption of 3.68 kWh/Nm3 H2. This represents an energy saving of >25% for hydrogen production on an industrial scale compared to conventional water electrolysis (∼5 kWh/Nm3 H2) in addition to the production of valuable chemicals.

Recent progress in energy-saving electrocatalytic hydrogen production via regulating the anodic oxidation reaction

Hydrogen energy with its advantages of high calorific value, renewable nature, and zero carbon emissions is considered an ideal candidate for clean energy in the future. The electrochemical decomposition of water, powered by renewable and clean energy sources, presents a sustainable and environmentally friendly approach to hydrogen production. However, the traditional electrochemical overall water-splitting reaction (OWSR) is limited by the anodic oxygen evolution reaction (OER) with sluggish kinetics. Although important advances have been made in efficient OER catalysts, the theoretical thermodynamic difficulty predetermines the inevitable large potential (1.23 V vs. RHE for the OER) and high energy consumption for the conventional water electrolysis to obtain H2. Besides, the generation of reactive oxygen species at high oxidation potentials can lead to equipment degradation and increase maintenance costs. Therefore, to address these challenges, thermodynamically favorable anodic oxidation reactions with lower oxidation potentials than the OER are used to couple with the cathodic hydrogen evolution reaction (HER) to construct new coupling hydrogen production systems. Meanwhile, a series of robust catalysts applied in these new coupled systems are exploited to improve the energy conversion efficiency of hydrogen production. Besides, the electrochemical neutralization energy (ENE) of the asymmetric electrolytes with a pH gradient can further promote the decrease in application voltage and energy consumption for hydrogen production. In this review, we aim to provide an overview of the advancements in electrochemical hydrogen production strategies with low energy consumption, including (1) the traditional electrochemical overall water splitting reaction (OWSR, HER-OER); (2) the small molecule sacrificial agent oxidation reaction (SAOR) and (3) the electrochemical oxidation synthesis reaction (EOSR) coupling with the HER (HER-SAOR, HER-EOSR), respectively; (4) regulating the pH gradient of the cathodic and anodic electrolytes. The operating principle, advantages, and the latest progress of these hydrogen production systems are analyzed in detail. In particular, the recent progress in the catalytic materials applied to these coupled systems and the corresponding catalytic mechanism are further discussed. Furthermore, we also provide a perspective on the potential challenges and future directions to foster advancements in electrocatalytic green sustainable hydrogen production.

Oxygenate-induced structural evolution of high-entropy electrocatalysts for multifunctional alcohol electrooxidation integrated with hydrogen production

High-entropy compounds have been emerging as promising candidates for electrolysis, yet their controllable electrosynthesis strategy remains a formidable challenge because of the ambiguous ionic interaction and codeposition mechanism. Herein, we report a oxygenates directionally induced electrodeposition strategy to construct high-entropy materials with amorphous features, on which the structural evolution from high-entropy phosphide to oxide is confirmed by introducing vanadate, thus realizing the simultaneous optimization of composition and structure. The representative P-CoNiMnWVOx shows excellent bifunctional catalytic performance toward alkaline hydrogen evolution reaction and ethanol oxidation reaction (EOR), with small potentials of -168 mV and 1.38 V at 100 mA cm-2, respectively. In situ spectroscopy illustrates that the electrochemical reconstruction of P-CoNiMnWVOx induces abundant Co-O species as the main catalytic active species for EOR and follows the conversion pathway of the C2 product. Theoretical calculations reveal the optimized electronic structure and adsorption free energy of reaction intermediates on P-CoNiMnWVOx, thereby resulting in a facilitated kinetic process. A membrane-free electrolyzer delivers both high Faradaic efficiencies of acetate and H2 over 95% and superior stability at100 mA cm-2 during 120 h electrolysis. In addition, the unique composition and structural advantages endow P-CoNiMnWVOx with multifunctional catalytic activity and realize multipathway electrosynthesis of formate-coupled hydrogen production.

Crystal structure optimization of copper oxides for the benzyl alcohol oxidation reaction

In this work, experimental and theoretical analyses reveal that different types of Cu wires significantly change the adsorption properties of reactant molecules and the benzyl alcohol oxidation reaction performance. In particular, CuO nanowires in situ grown on Cu foam exhibit the best performance with a low potential of 1.39 V at a current density of 200 mA cm-2, high selectivity to benzoic acid production, and good operational stability.

Energy-Saving Electrochemical Hydrogen Production Coupled with Biomass-Derived Isobutanol Upgrading

The widespread application of electrochemical hydrogen production faces significant challenges, primarily attributed to the high overpotential of the oxygen evolution reaction (OER) in conventional water electrolysis. To address this issue, an effective strategy involves substituting OER with the value-added oxidation of biomass feedstock, reducing the energy requirements for electrochemical hydrogen production while simultaneously upgrading the biomass. Herein, we introduce an electrocatalytic approach for the value-added oxidation of isobutanol, a high energy density bio-fuel, coupled with hydrogen production. This approach offers a sustainable route to produce the valuable fine chemical isobutyric acid under mild condition. The electrodeposited Ni(OH)2 electrocatalyst exhibits exceptional electrocatalytic activity and durability for the electro-oxidation of isobutanol, achieving an impressive faradaic efficiency of up to 92.4 % for isobutyric acid at 1.45 V vs. RHE. Mechanistic insights reveal that side reactions predominantly stem from the oxidative C-C cleavage of isobutyraldehyde intermediate, forming by-products including formic acid and acetone. Furthermore, we demonstrate the electro-oxidation of isobutanol coupled with hydrogen production in a two-electrode undivided cell, notably reducing the electrolysis voltage by approximately 180 mV at 40 mA cm-2. Overall, this work represents a significant step towards improving the cost-effectiveness of hydrogen production and advancing the conversion of bio-fuels.

Next-Generation Green Hydrogen: Progress and Perspective from Electricity, Catalyst to Electrolyte in Electrocatalytic Water Splitting

Green hydrogen from electrolysis of water has attracted widespread attention as a renewable power source. Among several hydrogen production methods, it has become the most promising technology. However, there is no large-scale renewable hydrogen production system currently that can compete with conventional fossil fuel hydrogen production. Renewable energy electrocatalytic water splitting is an ideal production technology with environmental cleanliness protection and good hydrogen purity, which meet the requirements of future development. This review summarizes and introduces the current status of hydrogen production by water splitting from three aspects: electricity, catalyst and electrolyte. In particular, the present situation and the latest progress of the key sources of power, catalytic materials and electrolyzers for electrocatalytic water splitting are introduced. Finally, the problems of hydrogen generation from electrolytic water splitting and directions of next-generation green hydrogen in the future are discussed and outlooked. It is expected that this review will have an important impact on the field of hydrogen production from water.

Electrocatalytic Oxidation of Benzaldehyde on Gold Nanoparticles Supported on Titanium Dioxide

The electrooxidation of organic compounds offers a promising strategy for producing value-added chemicals through environmentally sustainable processes. A key challenge in this field is the development of electrocatalysts that are both effective and durable. In this study, we grow gold nanoparticles (Au NPs) on the surface of various phases of titanium dioxide (TiO2) as highly effective electrooxidation catalysts. Subsequently, the samples are tested for the oxidation of benzaldehyde (BZH) to benzoic acid (BZA) coupled with a hydrogen evolution reaction (HER). We observe the support containing a combination of rutile and anatase phases to provide the highest activity. The excellent electrooxidation performance of this Au-TiO2 sample is correlated with its mixed-phase composition, large surface area, high oxygen vacancy content, and the presence of Lewis acid active sites on its surface. This catalyst demonstrates an overpotential of 0.467 V at 10 mA cm-2 in a 1 M KOH solution containing 20 mM BZH, and 0.387 V in 100 mM BZH, well below the oxygen evolution reaction (OER) overpotential. The electrooxidation of BZH not only serves as OER alternative in applications such as electrochemical hydrogen evolution, enhancing energy efficiency, but simultaneously allows for the generation of high-value byproducts such as BZA.

Sustainable Adipic Acid Production via Paired Electrolysis of Lignin-Derived Phenolic Compounds with Water as Hydrogen and Oxygen Sources

Adipic acid (AA) is an important feedstock for nylon polymers and is industrially produced from fossil-derived aromatics via thermocatalysis. However, this process consumes explosive H2 and corrosive HNO3 as reductants and oxidants, respectively. Here, we report the direct synthesis of AA from lignin-derived phenolic compounds via paired electrolysis using bimetallic cooperative catalysts. At the cathode, phenol is hydrogenated on PtAu catalysts to form ketone-alcohol (KA) oil with 92% yield and 43% Faradaic efficiency (FE). At the anode, KA is electrooxidized into AA on CuCo2O4 catalysts, achieving a maximum of 85% yield and 84% FE. Experimental and theoretical studies reveal that the excellent catalytic activity can be ascribed to the enhanced absorption and activation capability of reactants on the bimetallic cooperative catalysts. A two-electrode flow electrolyzer for AA synthesis realizes a stable electrolysis at 2.5 A for over 200 h as well as 38.5% yield and 70.2% selectivity. This study offers a green and sustainable route for AA synthesis from lignin via paired electrolysis.