ZIF-67 decorated with silica nanoparticles and graphene oxide nanosheets composite modified electrode for simultaneous determination of paracetamol and diclofenac

In this work, a novel nanocomposite containing zeolitic imidazolate framework-67 decorated silica nanoparticles/graphene oxide nanosheets (ZIF-67/SiO2NPs/GONs) was synthesized and used for the fabrication of the modified glassy carbon electrode for individual and simultaneous electrodetermination of paracetamol (PAR) and diclofenac (DIC) at trace levels. Structural and morphological characterization of the nanocomposite were carried out using suitable techniques. The modified electrode; ZIF-67/SiO2NPs/GONs/GCE, exhibited excellent electrocatalytic activities toward the oxidation of PAR and DIC than the bare GCE, GONs/GCE, SiO2NPs/GONs/GCE and ZIF-67/GCE. Through using differential pulse voltammetry, the individual and simultaneous determination of PAR and DIC were conducted by the ZIF-67/SiO2NPs/GONs/GCE. Under optimal conditions, it has been observed that the calibration plots for PAR and DIC exhibit linearity within the concentration ranges of 0.5-190 (PAR) and 0.5-200 µM (DIC), with detection limits of 0.29 and 0.132 µM for PAR and DIC, respectively. The ZIF-67/SiO2NPs/GONs/GCE shows commendable stability, reproducibility, and repeatability, and the proposed method is evaluated by individual and simultaneous determination of PAR and DIC in real samples with satisfactory results (recovery > 97%).

Fe3O4-Cu-BTC/MWCNTs modified electrodes for real-time chlorine monitoring in aqueous solution

A efficient sensor is presented for detecting free chlorine in water by decorating glassy carbon electrodes (GCE) via multi-walled carbon nanotubes (MWCNTs) and Fe3O4-Cu-BTC composite. After the characterization of prepared materials by field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR) techniques, and N2 adsorption-desorption isotherm, the electrochemical properties of Fe3O4-Cu-BTC/MWCNTs/GC-modified electrode were assessed with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). CV and chronoamperometry measurement in phosphate buffer solution with pH 7.0 proved the capability of the designed sensor to detect free chlorine. With amperometric detection, the modified electrode exhibits a linear response in the 0.1 to 400.0 ppm range towards free chlorine with a detection limit (LOD) (S/N = 3) of 0.0044 ppm, sufficient to control swimming pool water. To assay the practicability of the designed sensor in real situations, interferences of common ions and dissolved oxygen were tested on free chlorine determination and showed admirable selectivity. The proposed sensor also provides satisfactory results of free chlorine measurement in different real samples of swimming pool waters. The results of this work affirmed that MOF composite could be a promising material in the architecture of free chlorine electrochemical sensors in aqueous media.

MOF UiO-66 and its composites: design strategies and applications in drug and antibiotic removal

Antibiotics and pharmaceuticals exert significant environmental risks to aquatic ecosystems and human health. Many effective remedies to this problem have been developed through research. Metal-organic frameworks (MOFs) are potential constituents, for drug and antibiotic removal. This article explores the potential of MOFs like UiO-66 (University of Oslo-66) to remove pharmaceutical and antibiotic contaminants from water. Zr-based MOF UiO-66 is used in water treatment due to its well-known chemical, thermal, and mechanical stability. The review covers several modifications, including metal doping, organic-group functionalization, and composite construction, to increase the UiO-66 selectivity and adsorption capacity for various pollutants. Recent studies have shown that UiO-66 is an effective material for pharmaceutical pollutants such as ciprofloxacin, tetracycline, and sulfamethoxazole removal. Practical application, photostability, and large-scale synthesis remain challenges in water treatment methods. Moreover, recent studies indicate the recycling potential of UiO-66 that validates its capability to retain its efficiency over multiple cycles, indicating its cost-effectiveness and sustainability. Besides, the toxicity of UiO-66 and its derivatives, which occur during water treatment, has also been highlighted, addressing the health and environmental risks. Prospective research directions include designing flaws, producing stable analogs of UiO-66, and transforming powdered UiO-66 into other forms that might be utilized, including films and membranes. This review is crucial as no comprehensive literature is currently available that thoroughly discusses the design techniques and applications of UiO-66 and its composites for drug and antibiotic removal. Our study specifically concentrates on the latest developments, emphasizing particular alterations that improve performance in water treatment.

Emerging insights into the application of metal-organic framework (MOF)-based materials for electrochemical heavy metal ion detection

Heavy metal ions are one of the main sources of water pollution, which has become a major global problem. Given the growing need for heavy metal ion detection, electrochemical sensor stands out for its high sensitivity and efficiency. Metal-organic frameworks (MOFs) have garnered much interest as electrode modifiers for electrochemical detection of heavy metal ions owing to their significant specific surface area, tailored pore size, and catalytic activity. This review summarizes the progress of MOF-based materials, including pristine MOFs and MOF composites, in the electrochemical detection of various heavy metal ions. The synthetic methods of pristine MOFs, the detection mechanisms of heavy metal ions and the modification strategies of MOFs are introduced. Besides, the diverse applications of MOF-based materials in detecting both single and multiple heavy metal ions are presented. Furthermore, we present the current challenges and prospects for MOF-based materials in electrochemical heavy metal ion detection.

C-GCS@ZIF-F/PL based electrochemical sensor for rapid and ultra-sensitive detection of rutin in foods

Herein, a stable and ultra-sensitive rutin electrochemical sensor was successfully developed. This sensor based on glassy carbon electrode (GCE) modified with C-GCS@ZIF-F/PL nanocomposite, which was made of thermally carbonized glucose (GCS) doped with flower-like ZIF (ZIF-F) and pencil lead (PL). The electrochemical response of rutin was considerably significant at C-GCS@ZIF-F/PL/GCE, demonstrating favorable conductivity and electrocatalytic properties for detection of rutin. Under optimal conditions, the linear range is 0.1-100 μM, with a low detection limit (LOD) of 0.0054 μM. It also exhibits excellent stability, reproducibility, as well as selectivity over common interfering ions such as Na+, uric acid, quercetin and riboflavin, etc. Meanwhile, the practical utility of developed sensor was evaluated in food samples including honey, orange, and buckwheat tea, achieving satisfactory recovery rates ranging from 98.2% to 101.7%. This paper introduces a novel technique for the detection of rutin in foods.

Metal Organic Frameworks Based Wearable and Point-of-Care Electrochemical Sensors for Healthcare Monitoring

The modern healthcare system strives to provide patients with more comfortable and less invasive experiences, focusing on noninvasive and painless diagnostic and treatment methods. A key priority is the early diagnosis of life-threatening diseases, which can significantly improve patient outcomes by enabling treatment at earlier stages. While most patients must undergo diagnostic procedures before beginning treatment, many existing methods are invasive, time-consuming, and inconvenient. To address these challenges, electrochemical-based wearable and point-of-care (PoC) sensing devices have emerged, playing a crucial role in the noninvasive, continuous, periodic, and remote monitoring of key biomarkers. Due to their numerous advantages, several wearable and PoC devices have been developed. In this focused review, we explore the advancements in metal-organic frameworks (MOFs)-based wearable and PoC devices. MOFs are porous crystalline materials that are cost-effective, biocompatible, and can be synthesized sustainably on a large scale, making them promising candidates for sensor development. However, research on MOF-based wearable and PoC sensors remains limited, and no comprehensive review has yet to synthesize the existing knowledge in this area. This review aims to fill that gap by emphasizing the design of materials, fabrication methodologies, sensing mechanisms, device construction, and real-world applicability of these sensors. Additionally, we underscore the importance and potential of MOF-based wearable and PoC sensors for advancing healthcare technologies. In conclusion, this review sheds light on the current state of the art, the challenges faced, and the opportunities ahead in MOF-based wearable and PoC sensing technologies.

Rapid detection of tertiary butylated hydroquinone in food samples using Mn-MOF@f-CNF composite-modified screen-printed electrode

Hydroquinone-based organic molecules are often used as unavoidable preservatives in the food industry. Among these additives, tertiary butylated hydroquinone (TBHQ) is widely employed as a preservative in various processed foods. However, the potential health risks associated with the excessive presence of TBHQ in food products have raised significant concerns. To address this pressing issuea novel binder-free composite composed of a manganese metal-organic framework and functionalized carbon nanofibers (Mn-MOF/f-CNF) has been developed as an electrode modifier for the ultrasensitive detection of TBHQ in food samples. The Mn-MOF/f-CNF composite was achieved using the ultrasonication method, revealing a lamellar sheet-like structure of the Mn-MOF and the curly thread-like fibrous structure of f-CNF. The developed Mn-MOF/f-CNF/SPE sensor system resulted in well-defined redox signals for TBHQ detection in a neutral pH solution. Compared to the unmodified SPE system, the modified system showed approximately a 300 mV reduction in overpotential and a twofold increase in peak current signal for TBHQ detection. The Mn-MOF/f-CNF/SPE sensor system showed a linear concentration window of 0.01 to 800 μM with a sensitivity of 6.28 µA µM-1 cm-2 and the obtained detection limit was 1.36 nM. Additionally, the proposed sensor displayed excellent reproducibility and repeatable results with an RSD of less than 5%. The real-time applicability of the Mn-MOF/f-CNF/SPE sensor system was demonstrated using real samples such as potato chips and instant noodles, showing excellent results with a recovery range of 95.1-98.5%.

Two-Dimensional Metal-Organic Frameworks/Epoxy Composite Coatings with Superior O2/H2O Resistance for Anticorrosion Applications

Corrosion protection technology plays a crucial role in preserving infrastructure, ensuring safety and reliability, and promoting long-term sustainability. In this study, we combined experiments and various analyses to investigate the mechanism of corrosion occurring on the epoxy-based anticorrosive coating containing the additive of two-dimensional (2D) and water-stable zirconium-based metal-organic frameworks (Zr-MOFs). By using benzoic acid as the modulator for the growth of the MOF, a 2D MOF constructed from hexazirconium clusters and BTB linkers (BTB = 1,3,5-tri(4-carboxyphenyl)benzene) with coordinated benzoate (BA-ZrBTB) can be synthesized. By coating the BA-ZrBTB/epoxy composite film (BA-ZrBTB/EP) on the surface of cold-rolled steel (CRS), we found the lowest coating roughness (RMS) of BA-ZrBTB/EP is 2.83 nm with the highest water contact angle as 99.8°, which represents the hydrophobic coating surface. Notably, the corrosion rate of the BA-ZrBTB/EP coating is 2.28 × 10-3 mpy, which is 4 orders of magnitude lower than that of the CRS substrate. Moreover, the energy barrier for oxygen diffusion through BA-ZrBTB/EP coating is larger than that for epoxy coating (EP), indicating improved oxygen resistance for adding 2D Zr-MOFs as the additive. These results underscore the high efficiency and potential of BA-ZrBTB as a highly promising agent for corrosion prevention in various commercial applications. Furthermore, this study represents the first instance of applying 2D Zr-MOF materials in anticorrosion applications, opening up new possibilities for advanced corrosion-resistant coatings.

Zirconium-based metal-organic frameworks and their roles in electrocatalysis

Due to their exceptional chemical stability in water and high structural tunability, zirconium(IV)-based MOFs (Zr-MOFs) have been considered attractive materials in the broad fields of electrocatalysis. Numerous studies published since 2015 have attempted to utilise Zr-MOFs in electrocatalysis, with the porous framework serving as either the active electrocatalyst or the scaffold or surface coating to further enhance the performance of the actual electrocatalyst. Herein, the roles of Zr-MOFs in electrocatalytic processes are discussed, and some selected examples reporting the applications of Zr-MOFs in various electrocatalytic reactions, including several studies from our group, are overviewed. Challenges, limitations and opportunities in using Zr-MOFs in electrocatalysis in future studies are discussed.

Fabrication of magnetic carbohydrate-modified iron oxide nanoparticles (Fe3O4/pectin) decorated with bimetallic Co/Cu-MOF as an effective and recoverable catalyst for the Biginelli reaction

Due to their biocompatibility, facile recoverability, mechanical and thermal stability, high surface area, and active catalytic sites, magnetic nanocomposites, containing natural polymers and magnetic nanoparticles, have been used to produce supports for catalysts or biocatalysts. Pectin, an important polycarbohydrate, has abundant functional groups with excellent ability to coat the surface of the nanoparticles to fabricate composite and hybrid materials. A novel bimetallic cobalt(ii) and copper(ii)-based metal-organic framework (Co/Cu-MOF) immobilized pectin-modified Fe3O4 magnetic nanocomposite was designed and fabricated. Fe3O4 nanoparticles were modified in situ by pectin and, subsequently, used as a support for growing Co/Cu-MOF [Fe3O4/pectin/(Co/Cu)MOF]. The properties of the nanocomposite were investigated by FT-IR, XRD, SEM, EDS, VSM, STA, and BET. The nanocomposite exhibited both magnetic characteristics and a high surface area, making it a suitable candidate for catalytic applications. Then, the Fe3O4/pectin/(Co/Cu)MOF nanocomposite was utilized in the Biginelli reaction for the production of biologically active dihydropyrimidinones. Due to paramagnetism, Fe3O4/pectin/(Co/Cu)MOF was easily recovered and reused in six cycles without significant loss in reactivity. This green method comprises several benefits, such as mild reaction conditions, free-solvent media, high yields, easy workup, short reaction times and reusability of the prepared catalyst.

Immobilization of europium and terbium ions with tunable ratios on a dispersible two-dimensional metal-organic framework for ratiometric photoluminescence detection of D2O

A two-dimensional zirconium-based metal-organic framework (2D Zr-MOF), ZrBTB (BTB = 1,3,5-tri(4-carboxyphenyl)benzene), is used as a platform to simultaneously immobilize terbium ions and europium ions with tunable ratios on its hexa-zirconium nodes by a post-synthetic modification. The crystallinity, morphology, porosity and photoluminescence (PL) properties of the obtained 2D Zr-MOFs with various europium-to-terbium ratios are investigated. With the energy transfer from the excited BTB linker to the installed terbium ions and the energy transfer from terbium ions to europium ions, a low loading of immobilized europium ions and a high loading of surrounding terbium ions in the 2D Zr-MOF result in the optimal PL emission intensities of europium; this phenomenon is not observable for the physical mixture of both terbium-installed ZrBTB and europium-installed ZrBTB. The role of installed terbium ions as efficient mediators for the energy transfer from the excited BTB linker to the installed europium ion is confirmed by quantifying PL quantum yields. As a demonstration, these materials with modulable PL characteristics are applied for the ratiometric detection of D2O in water, with the use of the stable emission from the BTB linker as the reference. With the strong emission of immobilized europium ions and the good dispersity in aqueous solutions, the optimal bimetal-installed ZrBTB, Eu-Tb-ZrBTB(1 : 10), can achieve the sensing performance outperforming those of the terbium-installed ZrBTB, europium-installed ZrBTB and the physical mixture of both.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Non-enzymatic electrochemical impedance sensor for selective detection of electro-inactive organophosphate pesticides using Zr-MOF/ZrO2/MWCNT ternary composite

The existence of multiple pesticide residues in fruits and vegetables constitutes a direct peril to living organisms. Therefore, it is crucial to develop a low-cost screening method for determining organophosphate pesticides (OPPs) in food samples. This study describes the solvothermal synthesis of a ternary composite comprising multi-walled carbon nanotubes (MWCNT), zirconium oxide, and a zirconium-metal-organic framework (Zr-MOF). The ternary composite was characterised using XRD, FESEM, FTIR, and BET. The ternary composite provides a large surface area (1158 m2/g) compared with the pristine Zr-MOF (868 m2/g). The composite-modified glassy carbon electrode was used to determine nine pesticides, including organophosphate (malathion, dimethoate, chlorpyrifos, monocrotophos, and glyphosate) and non-organophosphate (thiophanate methyl, carbendazim, atrazine, and 2,4, D). In particular, various chemical combinations of OPPs were selected, such as S-P=S, P=S, P=O, and non-OPPs such as C=S (with sulphur), and without sulphur. The sensor results show that the sensor selectivity is high for OPPs containing both phosphorus and sulphur molecules. The low detection limit of the sensor was 2.02, 2.8, 2.5, 1.11, and 2.01 nM for malathion, chlorpyrifos, dimethoate, monocrotophos, and glyphosate, respectively. The electrode exhibited significant chemical stability (93%) after 100 cycles, good repeatability, and a long shelf life. The sensor is reliable for qualitative real-time applications.

Natural Polymer Encapsulated Zeolitic Imidazolate Framework-12 Composite toward Electrochemical Sensing of Antitumor Agent

Encapsulation of natural polymer pectin (Pec) into a zeolitic imidazolate framework-12 (ZIF-12) matrix via a simple chemical method toward anticancer agent gallic acid (GA) detection is reported in this work. GA, a natural phenol found in many food sources, has gained attention by its biological effects on the human body, such as an antioxidant and anti-inflammatory. Therefore, it is crucial to accurately and rapidly determine the GA level in humans. The encapsulation of Pec inside the ZIF-12 has been successfully confirmed from the physiochemical studies such as XRD, Raman, FTIR, and XPS spectroscopy along with morphological FESEM, BET, and HRTEM characterization. Under optimized conditions, the Pec@ZIF-12 composite exhibits wide linear range of 20 nM-250 μM with a detection limit of 2.2 nM; also, it showed excellent selectivity, stability, and reproducibility. Furthermore, the real sample analysis of food samples including tea, coffee, grape, and pomegranate samples shows exceptional recovery percentage in an unspiked manner. So far, there is little literature for encapsulating proteins, enzymes, metals, etc., that have been reported; here, we successfully encapsulated a natural polymer Pec inside the ZIF-12 cage. This encapsulation significantly enhanced the composite electrochemical performance, which could be seen from the overall results. All of these strongly suggest that the proposed Pec@ZIF-12 composite could be used for miniaturized device fabrication for the evaluation of GA in both home and industrial applications.

Detection and treatment of mono and polycyclic aromatic hydrocarbon pollutants in aqueous environments based on electrochemical technology: recent advances

Mono and polycyclic aromatic hydrocarbons are widely distributed and severely pollute the aqueous environment due to natural and human activities, particularly human activity. It is crucial to identify and address them in order to reduce the dangers and threats they pose to biological processes and ecosystems. In the fields of sensor detection and water treatment, electrochemistry plays a crucial role as a trustworthy and environmentally friendly technology. In order to accomplish trace detection while enhancing detection accuracy and precision, researchers have created and studied sensors using a range of materials based on electrochemical processes, and their results have demonstrated good performance. One cannot overlook the challenges associated with treating aromatic pollutants, including mono and polycyclic. Much work has been done and good progress has been achieved in order to address these challenges. This study discusses the mono and polycyclic aromatic hydrocarbon sensor detection and electrochemical treatment technologies for contaminants in the aqueous environment. Additionally mentioned are the sources, distribution, risks, hazards, and problems in the removal of pollutants. The obstacles to be overcome and the future development plans of the field are then suggested by summarizing and assessing the research findings of the researchers.

Nickel-Iron-Modified 2D Metal-Organic Framework as a Tunable Precatalyst for Electrochemical Water Oxidation

Mixed-metal metal-organic framework (MOF)-based water oxidation precatalysts have aroused a great deal of attention due to their remarkable catalytic performance. Yet, despite significant advancement in this field, there is still a need to design new MOF platforms that allow simple and systematic control over the final catalyst's metal composition. Here, we show that a Zr-BTB 2D-MOF could be used to construct a series of Ni-Fe-based oxide hydroxide water oxidation precatalysts with diverse Ni-Fe compositions. In situ Raman spectroscopy characterization revealed that the MOF precatalysts could be electrochemically converted to the active catalysts (NiFeOOH). In turn, it was found that the highest water oxidation activity was obtained with a catalyst containing a 47:53 Ni:Fe molar ratio. Additionally, the obtained catalyst is also active toward electrochemical methanol oxidation, exhibiting high selectivity toward the formation of formic acid. Hence, these results could pave the way for the development of efficient electrocatalytic materials for a variety of oxidative reactions.

Advanced Hybrid materials in electrochemical sensors: Combining MOFs and conducting polymers for environmental monitoring

The integration of conducting polymers (CPs) with metal-organic frameworks (MOFs) has arisen as a dynamic and innovative approach to overcome some intrinsic limitations of both materials, representing a transformative method to address the pressing need for high-performance environmental monitoring tools. MOFs, with their intricate structures and versatile functional groups, provide tuneable porosity and an extensive surface area, facilitating the selective adsorption of target analytes. Conversely, CPs, characterized by their exceptional electrical conductivity and redox properties, serve as proficient signal transducers. By combining these two materials, a novel class of hybrid materials emerges, capitalizing on the unique attributes of both components. These MOF/CP hybrids exhibit heightened sensitivity, selectivity, and adaptability, making them primordial in detecting and quantifying environmental contaminants. This review examines the synergy between MOFs and CPs, highlighting recent advancements, challenges, and prospects, thus offering a promising solution for developing advanced functional materials with tailored properties and multifunctionality to be applied in electrochemical sensors for environmental monitoring.

Thiacalix[4]arene-based metal-organic framework/reduced graphene oxide composite for electrochemical detection of chlorogenic acid

A novel metal-organic framework [Co2LCl4]·2DMF (Co-L) based on thiacalix[4]arene derivative was synthesized using the solvothermal method. Then Co-L was respectively mixed with reduced graphene oxide (RGO), multi-walled carbon nanotubes (MWCNT) and mesoporous carbon (MC) to prepare corresponding composite materials. PXRD, SEM and N2 adsorption-desorption illustrated that composite materials have been successfully prepared. After optimizing experimental conditions for detecting chlorogenic acid (CGA), the Co-L@RGO(1:1) composite material showed the optimal electrocatalytic activity for CGA, which may be because RGO possessed large specific surface area and hydroxyl and carboxyl groups that could form hydrogen-bonding with the oxide of CGA. Benefiting from the synergetic effect of Co-L and RGO, the glassy carbon electrode modified with Co-L@RGO(1:1) (Co-L@RGO(1:1)/GCE) exhibited a low limit of detection (LOD) of 7.24 nM for CGA within the concentration of 0.1-2 μM and 2-20 μM. Co-L@RGO(1:1)/GCE also showed excellent selectivity, stability, and reproducibility for the CGA detection. Co-L@RGO(1:1)/GCE could detect the CGA in honeysuckle with satisfactory results. This work provided a great example for the thiacalix[4]arene-based MOF in the application of electrochemical sensors.

Facile synthesis of Ag/ZIF-8@ZIF-67 as an electrochemical sensing platform for sensitive detection of halonitrophenols in drinking water

Halonitrophenols (HNPs) are an emerging type of aromatic disinfection byproduct, with detected concentrations of ∼nmol L-1 in source water and drinking water. Currently, there are no standard methods for identifying HNPs, and most of the reported methods are time-consuming and equipment-dependent. A core-shell metal-organic framework (MOF) based electrochemical sensor (Ag/ZIF-8@ZIF-67) capable of detecting 2,6-dichloro-4-nitrophenol (2,6-DCNP) is reported in this study. The electrochemical sensor obtains the concentration of 2,6-DCNP by detecting the peak current passing through the sensor. In this sensor, Ag nanoparticles (AgNPs) play a key role in electrochemical sensing by reducing nitro groups via electron transfer, and porous structure with a large surface area is offered by ZIF-8@ZIF-67. The cyclic voltammetry (CV) response of Ag/ZIF-8@ZIF-67 was found to be approximately 1.75 times and 2.23 times greater than that of Ag/ZIF-8 and Ag/ZIF-67, respectively, suggesting an ideal synergistic effect of the core-shell structures. The Ag/ZIF-8@ZIF-67 sensor exhibited exceptional sensitivity to 2,6-DCNP, exhibiting a broad linear response range (R2 = 0.992) from 240 nmol L-1 to 288 μmol L-1 and a low detection limit of 20 nmol L-1. Furthermore, the sensor exhibited good anti-interference for isomers and common distractors in water, excellent stability and reproducibility, and high recovery in actual water samples. Our reported sensor gives a novel strategy for sensitive, selective, and in situ detection of 2,6-DCNP in practical analysis.

Progress and opportunities for metal-organic framework composites in electrochemical sensors

Metal-organic framework composites have the advantages of large surface area, high porosity, strong catalytic efficiency and good stability, which provide a great possibility of finding excellent electrode materials for electrochemical sensors. However, MOF composites still face various challenges and difficulties, which limit their development and application. This paper reviews the application of MOF composites in electrochemical sensors, including MOF/carbon composites, MOF/metal nanoparticle composites, MOF/metal oxide composites and MOF/enzyme composites. In addition, the application challenges of MOF composites in electrochemical sensors are summarized. Finally, the application prospect for MOF composites is considered to promote the synthesis of more MOF composites with excellent properties.

Ultrasensitive and Simple Dopamine Electrochemical Sensor Based on the Synergistic Effect of Cu-TCPP Frameworks and Graphene Nanosheets

Dopamine (DA) is an important neurotransmitter. Abnormal concentration of DA can result in many neurological diseases. Developing reliable determination methods for DA is of great significance for the diagnosis and monitoring of neurological diseases. Here, a novel and simple electrochemical sensing platform for quantitative analysis of DA was constructed based on the Cu-TCPP/graphene composite (TCPP: Tetrakis(4-carboxyphenyl)porphyrin). Cu-TCPP frameworks were selected in consideration of their good electrochemical sensing potential. The graphene nanosheets with excellent conductivity were then added to further improve the sensing efficiency and stability of Cu-TCPP frameworks. The electrochemical properties of the Cu-TCPP/graphene composite were characterized, showing its large electrode active area, fast electron transfer, and good sensing performance toward DA. The signal enhancement mechanism of DA was explored. Strong accumulation ability and high electrocatalytic rate were observed on the surface of Cu-TCPP/graphene-modified glassy carbon electrode (Cu-TCPP/graphene/GCE). Based on the synergistic sensitization effect, an ultrasensitive and simple DA electrochemical sensor was developed. The linear range is 0.02–100 and 100–1000 µM, and the detection limit is 3.6 nM for the first linear range. It was also successfully used in detecting DA in serum samples, and a satisfactory recovery was obtained.

Fine-Tuning the Electrocatalytic Regeneration of NADH Cofactor Using [Rh(Cp*)(bpy)Cl]+-Functionalized Metal-Organic Framework Films

Electrochemical regeneration of the reduced form of the nicotinamide adenine dinucleotide (NADH) cofactor catalyzed by immobilized [Rh(Cp*)(bpy)Cl]⁺ is a promising approach for the enzymatic synthesis of many valuable chemicals with NAD-dependent dehydrogenases. However, rational control of the efficiency is often limited by the irregular structure of the electrode/electrolyte interface and the accessibility of the molecular catalyst. Here, we propose an electrochemical system for NADH cofactor regeneration, based on highly ordered three- dimensional (3D) metal-organic framework (NU-1000) films. [Rh(Cp*)(bpy)Cl]⁺ is incorporated at the zirconium nodes of NU-1000 via solvent-assisted ligand incorporation (SALI), leading to a diffusion-controlled behavior, associated with an electron hopping mechanism. Varying the ratio of redox-active [Rh(Cp*)(bpy)Cl]⁺ and inactive postgrafting agents enables the elaboration of functional electrodes with tunable electrocatalytic activity for NADH regeneration. The exceptionally high faradic efficiency of 97%, associated with a very high turnover frequency (TOF) of ∼1400 h^-1 for NADH regeneration, and the total turnover number (TTN) of over 20000 for the enzymatic conversion from pyruvate to l-lactate, when coupled with l-lactate dehydrogenases (LDH) as a model reaction, open up promising perspectives for employing these electrodes in various alternative bioelectrosynthesis approaches.

Recent Advances in Metal Nanocomposite-Based Electrochemical (Bio)Sensors for Pharmaceutical Analysis

Rising rates of drug abuse and pharmaceutical pollution throughout the world as a consequence of increased drug production and utilization pose a serious risk to public health and to environmental integrity. It is thus critical that reliable analytical approaches to detecting drugs and their metabolites in a range of sample matrices be developed. Recent advances in the design of nanomaterial-based electrochemical sensors and biosensors have enabled promising new approaches to pharmaceutical analysis. In particular, the development of a range of novel metal nanocomposites with enhanced catalytic properties has provided a wealth of opportunities for the design of rapid and reliable platforms for the detection of specific pharmaceutical compounds. The present review provides a comprehensive overview of representative metal nanocomposites with synergistic properties and their recent (2017-2022) application in the context of electrochemical sensing as a means of detecting specific antibiotic, tuberculostatic, analgesic, antineoplastic, antipsychotic, and antihypertensive drugs. In discussing these applications, we further explore a variety of testing-related principles, fabrication approaches, characterization techniques, and parameters associated with the sensitivity and selectivity of these sensor platforms before surveying the future outlook regarding the fabrication of next-generation (bio)sensor platforms for use in pharmaceutical analysis.

Effect of the Synthesis Conditions of MIL-100(Fe) on Its Catalytic Properties and Stability under Reaction Conditions

MIL-100(Fe) is a metal-organic framework (MOF) characterized by the presence of Lewis acid and Fe(II/III) redox sites. In this work, different synthesis methods for the preparation of MIL-100(Fe) are studied. Depending on the source of fluorine, different phases can be obtained: MIL-100(Fe) and an Fe trimesate with unknown structure which we call Fe(BTC). These materials were characterized using numerous techniques and applied in the reaction of CO₂ cycloaddition with epichlorohydrin, a reaction catalyzed by Lewis acid sites. It was observed that samples with more Fe(BTC) phase were more active in the reaction. However, all samples, under reaction conditions, transformed into a less active phase.

A copper-based metal-organic framework decorated with electrodeposited Fe2O3 nanoparticles for electrochemical nitrite sensing

An amperometric nitrite sensor is reported based on a screen-printed carbon electrode (SPCE) modified with copper(II)-benzene-1,4-dicarboxylate (Cu-BDC) frameworks and iron(III) oxide nanoparticles (Fe₂O₃ NPs). First, copper(I) oxide (Cu₂O) nanocubes were synthesized, followed by a solvothermal reaction between Cu₂O and H₂BDC to form square plate-like Cu-BDC frameworks. Then, Fe₂O₃ NPs were electrodeposited on Cu-BDC frameworks using a potentiostatic method. The Fe₂O₃@Cu-BDC nanocomposite benefits from high conductivity and large active surface area, offering excellent electrocatalytic activity for nitrite oxidation. Under optimal amperometric conditions (0.55 V vs. Ag/AgCl), the sensor has a linear range of 1 to 2000 µM with a detection limit of 0.074 µM (S/N = 3) and sensitivity of 220.59 µA mM^-1 cm^-2. The sensor also provides good selectivity and reproducibility (RSD = 1.91%, n = 5). Furthermore, the sensor exhibits long-term stability, retaining 91.4% of its original current after 4 weeks of storage at room temperature. Finally, assessing nitrite in tap and mineral water samples revealed that the Fe₂O₃@Cu-BDC/SPCE has a promising prospect in amperometric nitrite detection.

Covalent Organic Frameworks-TpPa-1 as an Emerging Platform for Electrochemical Sensing

Covalent organic frameworks (COFs) are a new type of metal-free porous architecture with a well-designed pore structure and high stability. Here an efficient electrochemical sensing platform was demonstrated based on COFs TpPa-1 constructed by 1,3,5-triformylphloroglucinol (Tp) with p-phenylenediamine (Pa-1), which possesses abundant nitrogen and oxo-functionalities. COFs TpPa-1 exhibited good water dispersibility and strong adsorption affinities for Pd²⁺ and thus was used as loading support to modify Pd²⁺. The Pd²⁺-modified COFs TpPa-1 electrode (Pd²⁺/COFs) showed high electrocatalytic activity for both hydrazine oxidation reaction and nitrophenol reduction reaction. In addition, TpPa-1-derived nitrogen-doped carbon presented high activity for the electro-oxidation of reduced glutathione (GSH), and sensitive electrochemical detection of GSH was achieved. The presented COFs TpPa-1 can be utilized as a precursor as well as support for anchoring electro-active molecules and nanoparticles, which will be useful for electrochemical sensing and electrocatalysis.

Electrostatic Secondary-Sphere Interactions That Facilitate Rapid and Selective Electrocatalytic CO2 Reduction in a Fe-Porphyrin-Based Metal-Organic Framework

Metal-organic frameworks (MOFs) are promising platforms for heterogeneous tethering of molecular CO2 reduction electrocatalysts. Yet, to further understand electrocatalytic MOF systems, one also needs to consider their capability to fine-tune the immediate chemical environment of the active site, and thus affect its overall catalytic operation. Here, we show that electrostatic secondary-sphere functionalities enable substantial improvement of CO2 -to-CO conversion activity and selectivity. In situ Raman analysis reveal that immobilization of pendent positively-charged groups adjacent to MOF-residing Fe-porphyrin catalysts, stabilize weakly-bound CO intermediates, allowing their rapid release as catalytic products. Also, by varying the electrolyte's ionic strength, systematic regulation of electrostatic field magnitude was achieved, resulting in essentially 100 % CO selectivity. Thus, this concept provides a sensitive molecular-handle that adjust heterogeneous electrocatalysis on demand.

Cu-TCPP Nanosheets-Sensitized Electrode for Simultaneous Determination of Hydroquinone and Catechol

It is quite important to develop sensitive, simple, and convenient methods for the simultaneous determination of Hydroquinone (HQ) and Catechol (CC) due to their wide existence, the difficulty of degradation, and the high toxicity. Herein, Cu-TCPP nanosheets were prepared in N,N-dimethylformamide (DMF) through the solvent exfoliation method. The morphology and electrochemical performance of Cu-TCPP were characterized, revealing its stacked sheet structure with abundant pores, a fast electron transfer ability, and a large electrode active area. Using Cu-TCPP nanosheets as the sensitive material to modify the glassy carbon electrodes (Cu-TCPP/GCEs), it was found that they had an obvious enhancement effect on the electrochemical oxidation currents of HQ and CC. The signal enhancement mechanism was explored. The Cu-TCPP nanosheets not only enhanced the accumulation abilities of HQ and CC, but also improved their apparent catalytic rate, displaying high sensitivity for HQ and CC. The values of the detection limit were calculated to be 3.4 and 2.3 nM for HQ and CC. A satisfactory recovery was obtained when this method was used in measuring HQ and CC in the water samples.

Applications of Metal-Organic Frameworks in Water Treatment: A Review

The ever-expanding scale of industry and agriculture has led to the gradual increase of pollutants (e.g., heavy metal ions, synthetic dyes, and antibiotics) in water resources, and the ecology and wastewater are grave problems that need to be solved urgently and has attracted widespread attention from the research community and industry in recent years. Metal-organic frameworks (MOFs) are a type of organic-inorganic hybrid material with a distinctive 3D network crystal structure. Lately, MOFs have made striking progress in the fields of adsorption, catalytic degradation, and biomedicine on account of their large specific surface and well-developed pore structure. This review summarizes the latest research achievements in the preparation of pristine MOFs, MOF composites, and MOF derivatives for various applications including the removal of heavy metal ions, organic dyes, and other harmful substances in sewage. Furthermore, the working mechanisms of utilizing adsorption, photocatalytic degradation, and membrane separation technologies are also briefly described for specific pollutants removal from sewage. It is expected that this review will provide inspiration and references for the synthesis of pristine MOFs as well as their composites and derivatives with excellent water treatment performance.

Recent progress in the development of porous carbon-based electrodes for sensing applications

Electrochemical (bio)sensors are considered clean and powerful analytical tools capable of converting an electrochemical reaction between analytes and electrodes into a quantitative signal. They are an important part of our daily lives integrated in various fields such as healthcare, food and environmental monitoring. Several strategies including the incorporation of porous carbon materials in its configuration have been applied to improve their sensitivity and selectivity in the last decade. The porosity, surface area, graphitic structure as well as chemical composition of materials greatly influence the electrochemical performance of the sensors. In this review, activated carbons, ordered mesoporous carbons, graphene-based materials, and MOF-derived carbons, which are used to date as crucial elements of electrochemical devices, are described, starting from their textural and chemical compositions to their role in the outcome of electrochemical sensors. Several relevant and meaningful examples about material synthesis, sensor fabrication and applications are illustrated and described. The closer perspectives of these fascinating materials forecast a promising future for the electrochemical sensing field.

Phosphorus or Nitrogen - The first Phosphatriptycene in Coordination Polymer Chemistry

Phosphasilatriptycene, a phenylene spacer and a pyridyl moiety represent the building blocks of TRIP-Py, the first heteroditopic ligand featuring a phoshatriptycene scaffold. The P and N donor sites located at...

An electrochemical sensor based on a glassy carbon electrode modified with sandwich structured ZIF-67@rGO for bisphenol A measurement

The low conductivity of metal-organic frameworks seriously impedes their electrocatalytic performance. In this study, we prepared a fabricated sandwich structure composed of a Co-based zeolitic imidazolate framework (ZIF-67) and reduced graphene oxide (rGO) through a facile and simple one-pot hydrothermal reaction. This framework of nanocomposites, which are modified with a glassy carbon electrode, constructed a bisphenol A (BPA) electrochemical sensor for the first time. Operational parameters such as pH, electrolytes, the amount of modifiers, deposition potentials and deposition time were optimised for the sensitive detection of BPA. The performance of electrodes was evaluated by cyclic voltammetry, electrochemical impedance spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction and transmission electron microscopy. With differential pulse voltammetry, the detection concentration of BPA ranged from 0.05 μmol L^-1 to 100 μmol L^-1. The results revealed that the hierarchical nanocomposites demonstrated better electrocatalytic performance with large electrochemically active surface areas, high sensitivity and a low limit of detection (5.2 nmol L^-1), compared with a physical mixture of ZIF-67 and rGO at the same ratio. These impressive features originate from the synergistic effects of ZIF-67 and rGO. This study presents a new strategy using metal-organic framework composite materials for the sensitive detection of BPA.

Proton-Conductive Cerium-Based Metal-Organic Frameworks

In this study, proton-conducting behaviors of a cerium-based metal-organic framework (MOF), Ce-MOF-808, its zirconium-based isostructural MOF, and bimetallic MOFs with various Zr-to-Ce ratios are investigated. The significantly increased proton conductivity (σ) and decreased activation energy (E_a) are obtained by substituting Zr with Ce in the nodes of MOF-808. Ce-MOF-808 achieves a σ of 4.4 × 10^-3 S/cm at 25 °C under 99% relative humidity and an E_a of 0.14 eV; this value is among the lowest-reported E_a of proton-conductive MOFs. Density functional theory calculations are utilized to probe the proton affinities of these MOFs. As the first study reporting the proton conduction in cerium-based MOFs, the finding here suggests that cerium-based MOFs should be a better platform for the design of proton conductors compared to the commonly reported zirconium-based MOFs in future studies on energy-related applications.

Group 4 Metal-Based Metal—Organic Frameworks for Chemical Sensors

Metal-organic frameworks (MOFs) have attracted great attention for their applications in chemical sensors mainly due to their high porosity resulting in high density of spatially accessible active sites, which can interact with the aimed analyte. Among various MOFs, frameworks constructed from group 4 metal-based (e.g., zirconium, titanium, hafnium, and cerium) MOFs, have become especially of interest for the sensors requiring the operations in aqueous media owing to their remarkable chemical stability in water. Research efforts have been made to utilize these group 4 metal-based MOFs in chemosensors such as luminescent sensors, colorimetric sensors, electrochemical sensors, and resistive sensors for a range of analytes since 2013. Though several studies in this subfield have been published especially over the past 3–5 years, some challenges and concerns are still there and sometimes they might be overlooked. In this review, we aim to highlight the recent progress in the use of group 4 metal-based MOFs in chemical sensors, and focus on the challenges, potential concerns, and opportunities in future studies regarding the developments of such chemically robust MOFs for sensing applications.