Advances in Capillary Electrophoretically Mediated Microanalysis for On-line Enzymatic and Derivatization Reactions

Determination of physicochemical parameters of (bio)molecules and (bio)particles by capillary electromigration methods

The review provides an overview of recent developments and applications of capillary electromigration (CE) methods for the determination of important physicochemical parameters of various (bio)molecules and (bio)particles. These parameters include actual and limiting (absolute) ionic mobilities, effective electrophoretic mobilities, effective charges, isoelectric points, electrokinetic potentials, hydrodynamic radii, diffusion coefficients, relative molecular masses, acidity (ionization) constants, binding constants and stoichiometry of (bio)molecular complexes, changes of Gibbs free energy, enthalpy and entropy and rate constants of chemical reactions and interactions, retention factors and partition and distribution coefficients. For the determination of these parameters, the following CE methods are employed: zone electrophoresis in a free solution or in sieving media, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography. In the individual sections, the procedures for the determination of the above parameters by the particular CE methods are described.

Ultrasensitive assay of O-GlcNAc transferase using capillary electrophoresis-laser induced fluorescence

O-linked N-acetylglucosamine (O-GlcNAc) transferase (OGT) is directly associated with the level of O-GlcNAc glycosylation of biomolecules and various diseases, and it is expected to be a promising potential new therapeutic target. Here, we develop a robust and sensitive method for OGT assay based on capillary electrophoresis-laser induced fluorescence (CE-LIF) method. AF-488-modified peptide containing serine active group is designed as substrate for OGT-catalyzed reaction, and nonradioactive UDP-GlcNAc is employed as sugar donor to perform O-GlcNAc glycosylation modification. The enzyme activity of OGT is measured by quantitative determination of glycosylated peptide produced by the reaction. Large volume sample stacking technique for sample injection and a unique fluorescence collection system for LIF detection are adopted to greatly enhance the detection sensitivity, thus a low limit of detection down to 0.23 pM for OGT detection is achieved. The method is successfully applied to detect OGT activity in clinical blood samples with satisfactory accuracy. Our study provides a simple, accurate, and sensitive method with great potential application in clinical diagnosis of O-GlcNAc-related diseases.

Peptide mapping of proteins by capillary electromigration methods

This review article provides a wide overview of important developments and applications of capillary electromigration methods in the area of peptide mapping of proteins in the period 1997-mid-2022, including review articles on this topic. It deals with all major aspects of peptide mapping by capillary electromigration methods: i) precleavage sample preparation involving purification, preconcentration, denaturation, reduction and alkylation of protein(s) to be analyzed, ii) generation of peptide fragments by off-line or on-line enzymatic and/or chemical cleavage of protein(s), iii) postcleavage preparation of the generated peptide mixture for capillary electromigration separation, iv) separation of the complex peptide mixtures by one-, two- and multidimensional capillary electromigration methods coupled with mass spectrometry detection, and v) a large application of peptide mapping for variable purposes, such as qualitative analysis of monoclonal antibodies and other protein biopharmaceuticals, monitoring of posttranslational modifications, determination of primary structure and investigation of function of proteins in biochemical and clinical research, characterization of proteins of variable origin as well as for protein and peptide identification in proteomic and peptidomic studies.

Capillary electrophoresis for enzyme-based studies: Applications to lipases and kinases

Capillary electrophoresis (CE) is a powerful technique continuously expanding into new application fields. One of these applications involves the study of enzymes, their catalytic activities and the alteration of this activity by specific ligands. In this review, two model enzymes, lipases and kinases, will be used since they differ substantially in their modes of action, reaction requirements and applications making them perfect subjects to demonstrate the advantages and limitations of CE-based enzymatic assays. Indeed, the ability to run CE in various operation modes and hyphenation to different detectors is essential for lipase-based studies. Additionally, the low sample consumption provided by CE promotes it as a promising technique to assay human and viral nucleoside kinases. Undeniably, these are rarely commercially available enzymes and must be frequently produced in the laboratory, a process which requires special sets of skills. CE-based lipase and kinase reactions can be performed outside the capillary (pre-capillary) where the reactants are mixed in a vial prior to their separation or, inside the capillary (in-capillary) where the reactants are mixed before the electrophoretic analysis. These enzyme-based applications of CE will be compared to those of liquid chromatography-based applications in terms of advantages and limitations. Binding assays based on affinity CE and the compelling microscale thermophoresis (MST) will be briefly presented as they allow a broad understanding of the molecular mechanism behind ligand binding and of the resulting modulation in activity.

Recent developments in capillary and microchip electroseparations of peptides (2019-mid 2021)

The review provides a comprehensive overview of developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, microscale isolation, and physicochemical characterization of peptides from 2019 up to approximately the middle of 2021. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis, such as sample preparation, sorption suppression, EOF control, and detection, are presented. New developments in the individual CE and CEC methods are demonstrated and several types of their applications are shown. They include qualitative and quantitative analysis, determination in complex biomatrices, monitoring of chemical and enzymatic reactions and physicochemical changes, amino acid, sequence, and chiral analyses, and peptide mapping of proteins. In addition, micropreparative separations and determination of significant physicochemical parameters of peptides by CE and CEC methods are described.

Direct Measurement of Initial Rate of Enzyme Reaction by Electrokinetic Filtration Using a Hydrogel-plugged Capillary Device

A novel electrokinetic filtration device using a plugged hydrogel was developed to directly measure the initial rate of enzyme reactions. In the proposed method, the enzyme reaction proceeded only for a short time when the substrate was passed through a thin layer of enzyme trapped by the hydrogel without any lag times for mixing and detection. In experimental conditions, alkaline phosphatase (enzyme) was filtrated at a cathodic-side interface of the plugged hydrogel by molecular sieving effect, providing the thin enzyme zone whose thickness was approximately 100 μm. When 4-methylumberiferyl phosphate (substrate) was electrokinetically introduced into the device after trapping the enzyme, 4-methylumberiferone (product) was generated by the enzyme reaction for only 1.26 s as the substrate passed through the trapped enzyme zone. As a result, the initial rate of the enzyme reaction could be directly calculated to 31.0 μM/s by simply dividing the concentration of the product by the tunable reaction time. Compared to the initial rate obtained by mixing the enzyme and substrate solutions, the value of the maximum velocity of the enzyme reaction was 30-fold larger than that in the mixing method due to the preconcentration of the enzyme by trapping. The Michaelis-Menten constant in the proposed method was 2.7-fold larger than that in the mixing method, suggesting the variation of changes in the equilibrium of complex formation under the experimental conditions.

Recent advance in the discovery of tyrosinase inhibitors from natural sources via separation methods

Tyrosinase (TYR) inhibitors are in great demand in the food, cosmetic and medical industrials due to their important roles. Therefore, the discovery of high-quality TYR inhibitors is always pursued. Natural products as one of the most important sources of bioactive compounds discovery have been increasingly used for TYR inhibitors screening. However, due to their complex compositions, it is still a great challenge to rapid screening and identification of biologically active components from them. In recent years, with the help of separation technologies and the affinity and intrinsic activity of target enzymes, two advanced approaches including affinity screening and inhibition profiling showed great promises for a successful screening of bioactive compounds from natural sources. This review summarises the recent progress of separation-based methods for TYR inhibitors screening, with an emphasis on the principle, application, advantage, and drawback of each method along with perspectives in the future development of these screening techniques and screened hit compounds.

Overview of in-capillary enzymatic reactions using capillary electrophoresis

This review summarizes the research that has recently been performed on in-capillary enzymatic reactions integrated with capillary electrophoresis. The manuscript is subdivided in homogeneous and heterogeneous approaches. The main homogeneous techniques are Electrophoretically Mediated Microanalysis, At-inlet and Transverse Diffusion of Laminar Flow Profiles. The main heterogeneous ones are Immobilized MicroEnzyme Reactors with enzymes grafted on either non-magnetic or magnetic particles. The overview covers the period from 2018 to early 2021. The applications range from drug discovery over natural products to food, beverage and pesticide analysis.

Fast in-line bottom-up analysis of monoclonal antibodies: Toward an electrophoretic fingerprinting approach

For their characterization and quality control, monoclonal antibodies are frequently analyzed at the bottom-up level to generate specific fingerprints that can be used to tackle post-translational modifications or ensure production consistency between lots. To circumvent time-consuming and labor-intensive off-line sample preparation steps, the implementation of integrated methodologies from sample preparation to separation and detection is highly valuable. In this perspective, capillary zone electrophoresis appears as a choice technique since the capillary can subsequently be used as a vessel for sample preparation and electrophoretic discrimination/detection of the reaction products. Here, a fast in-line methodology for the routine quality control of mAbs at the bottom-up level is reported. Simultaneous denaturation and reduction (pretreatment step) were conducted with RapiGest® surfactant and dithiothreitol before in-line tryptic digestion. Reactant mixing was realized by transverse diffusion of laminar flow profile under controlled temperature. In-line digestion was carried out with a resistant trypsin to autolysis. The main parameters affecting the digestion efficiency (trypsin concentration and incubation conditions) were optimized to generate mAb electrophoretic profiles free from trypsin interferences. An acidic MS-compatible BGE was used to obtain high resolution separation of released peptides and in-line surfactant cleavage. The whole methodology was performed in less than two hours with good repeatability of migration times (RSD = 0.91%, n = 5) and corrected peak areas (RSD = 9.6%, n = 5). CE-fingerprints were successfully established for different mAbs and an antibody-drug conjugate.

Toward an automated workflow for the study of plasma protein-drug interactions based on capillary electrophoresis-frontal analysis combined with in-capillary mixing of interacting partners

Capillary electrophoresis-frontal analysis (CE-FA) together with mobility shift affinity CE is the most frequently used mode of affinity CE for a study of plasma protein-drug interactions, which is a substantial part of the early stage of drug discovery. Whereas in the classic CE-FA setup the sample is prepared by off-line mixing of the interaction partners in the sample vial outside the CE instrument and after a short incubation period loaded into the capillary and analysed, in this work a new methodological approach has been developed that combines CE-FA with the mixing of interacting partners directly inside the capillary. This combination gives rise to a fully automated and versatile methodology for the characterization of these binding interactions besides a substantial reduction in the amounts of sample compounds used. The minimization of possible experimental errors due to the full involving of sophisticated CE instrument in the injection procedure, mixing and separation instead of manual manipulation is another fundamental benefit. The in-capillary mixing is based on the transverse diffusion of laminar flow profile methodology introduced by Krylov et al. using its multi-zone injection modification presented by Řemínek at al.. Actually, after the method optimization, the alternate introduction of six plugs of drug and six plugs of bovine serum protein in BGE, each injected for 3 s at a pressure of -10 mbar (-1 kPa) into the capillary filled by BGE, was found to be the best injection procedure. The method repeatability calculated as RSDs of plateau highs of bovine serum albumin and propranolol as model sample compounds were better than 3.44 %. Its applicability was finally demonstrated on the determination of apparent binding parameters of bovine serum albumin for basic drugs propranolol and lidocaine and acid drug phenylbutazone. The values obtained by a new on-line CE-FA methodology are in agreement with values estimated by classic off-line CE-FA, as well as with literature data obtained using different techniques.

Recent advances in screening active components from natural products based on bioaffinity techniques

Natural products have provided numerous lead compounds for drug discovery. However, the traditional analytical methods cannot detect most of these active components, especially at their usual low concentrations, from complex natural products. Herein, we reviewed the recent technological advances (2015–2019) related to the separation and screening bioactive components from natural resources, especially the emerging screening methods based on the bioaffinity techniques, including biological chromatography, affinity electrophoresis, affinity mass spectroscopy, and the latest magnetic and optical methods. These screening methods are uniquely advanced compared to other traditional methods, and they can fish out the active components from complex natural products because of the affinity between target and components, without tedious separation works. Therefore, these new tools can reduce the time and cost of the drug discovery process and accelerate the development of more effective and better-targeted therapeutic agents.

Evaluation inhibitory activity of catechins on trypsin by capillary electrophoresis-based immobilized enzyme microreactor with chromogenic substrate

In this study, a capillary electrophoresis-based online immobilized enzyme microreactor was developed for evaluating the inhibitory activity of green tea catechins and tea polyphenol extracts on trypsin. The immobilized trypsin activity and other kinetic parameters were evaluated by measuring the peak area of the hydrolyzate of chromogenic substrate S-2765. The results indicated that the activity of the immobilized trypsin remained approximately 90.0% of the initial immobilized enzyme activity after 30 runs. The value of Michaelis-Menten constant (K_m ) was (0.47 ± 0.08) mM, and the half-maximal inhibitory concentration (IC₅₀ ) and inhibition constant (K_i ) of benzamidine were measured as 3.34 and 3.00 mM, respectively. Then, the inhibitory activity of four main catechins (epicatechin, epigallocatechin, epicatechin gallate, and epigallocatechin gallate) and three tea polyphenol extracts (green tea, white tea, and black tea) on trypsin were investigated. The results showed that four catechins and three tea polyphenol extracts had potential trypsin inhibitory activity. In addition, molecular docking results illustrated that epigallocatechin gallate, epicatechin gallate, epicatechin, and epigallocatechin were all located not only in the catalytic cavity, but also in the substrate-binding pocket of trypsin. These results indicated that the developed method is an effective tool for evaluating inhibitory activity of catechins on trypsin.

Capillary electrophoresis-integrated immobilized enzyme microreactor with graphene oxide as support: Immobilization of negatively charged L-lactate dehydrogenase via hydrophobic interactions

We report the first application of hydrophobic interaction between graphene oxide (GO) and negatively charged enzymes to fabricate CE-integrated immobilized enzyme microreactors (IMERs) by a simple and reliable immobilization procedure based on layer by layer assembly. L-lactate dehydrogenase (L-LDH), which is negatively charged during the enzymatic reaction, is selected as the model enzyme. Various spectroscopic techniques, including SEM, FTIR, and UV-vis are used to characterize the fabricated CE-IMERs, demonstrating the successful immobilization of enzymes on the negatively charged GO layer in the capillary surface. The IMER exhibits excellent repeatability with RSDs of inter-day and batch-to-batch less than 3.49 and 6.37%, respectively, and the activity of immobilized enzymes remains about 90% after five-day usage. The measured K_m values of pyruvate and NADH of the immobilized L-LDH are in good agreement with those obtained by free enzymes. The results demonstrate that the hydrophobic interactions and/or π-π stacking is significant between the GO backbone and the aromatic residues of L-LDH and favorable to fabrication of CE-integrated IMERs. Finally, the method is successfully applied to the determination of pyruvate in beer samples.

Capillary electrophoresis-immobilized enzyme microreactors for acetylcholinesterase assay with surface modification by highly-homogeneous microporous layer

We propose a new capillary electrophoresis (CE)-based open-tubular immobilized enzyme microreactor (OT-IMER) and its application in acetylcholinesterase (AChE) assays. The IMER is fabricated at the capillary inlet (reactor length of ∼1 cm) with the inner surface modified by a micropore-structured layer (thickness of ∼220 nm, pore size of ∼15-20 nm). The use of IMER accomplishes the enzymatic reaction and separation/detection of the products in the same capillary within 3 min. The feasibility of the proposed method is evaluated via online analysis of the activity and inhibition of AChE enzymes. Such method exhibits good reproducibility with relative standard deviation (RSD) of less than 4% for 20 runs, and the enzyme remains over 82% of the initial activity after usage of 7 days. The IMERs are successfully applied to detect the organophosphorus pesticide, paraoxon, in three types of vegetable juice samples with a limit of detection of as low as 61 ng mL^-1. Results show that the spiked samples are in the range of 89.6-105.9% with RSD less than 2.7%, thereby indicating its satisfactory level of accurate and reliable analysis of real samples by using the proposed method. Our study indicates that, with combination of advantages of both porous-layer capillary and CE OT-IMER, the proposed method is capable to enhance enzymatic reactions and to achieve rapid analysis with simple instrumentation and operation, thus would pave the way for extensive application of CE-based IMERs in a variety of bioanalysis.

Capillary electrophoresis with dual detection UV/C4D for monitoring myrosinase-mediated hydrolysis of thiol glucosinolate designed for gold nanoparticle conjugation

Capillary electrophoresis (CE) with dual UV and conductivity detection was used for the first time to monitor the functionalization of gold nanoparticles (AuNPs), a process catalyzed by an enzyme, myrosinase (Myr). A thiol glucosinolate (GL-SH) designed by our group was used as substrate. Hydrolysis of free and immobilized GL-SH was characterized using off-line and on-line CE-based enzymatic assays. The developed approaches were validated using sinigrin, a well-referenced substrate of Myr. Michaelis-Menten constant of the synthetized GL-SH was comparable to sinigrin, showing that they both have similar affinity towards Myr. It was demonstrated that transverse diffusion of laminar flow profiles was well adapted for in-capillary Mixing of nanoparticles (AuNPs) with proteins (Myr) provided that the incubation time is inferior to 20 min. Only low reaction volume (nL to few μL) and short analysis time (<5 min) were required. The electrophoretic conditions were optimized in order to evaluate and to confirm the AuNPs stability before and after functionalization by CE/UV based on surface plasmon resonance band red-shifting. The hydrolysis of the functionalized AuNPs was subsequently evaluated using the developed CE-C⁴D/UV approach. Repeatabilities of enzymatic assays, of electrophoretic analyses and of batch-to-batch functionalized AuNPs were excellent.

Capillary electrophoretic assay of human acetyl-coenzyme A carboxylase 2

Human acetyl-coenzyme A carboxylase 2 catalyzes the carboxylation of acetyl coenzyme A to form malonyl coenzyme A, along with the conversion of magnesium-adenosine triphosphate complex to magnesium-adenosine diphosphate complex. A simple off-column capillary electrophoresis assay for human acetyl-coenzyme A carboxylase 2 was developed based on the separation of magnesium-adenosine triphosphate complex, magnesium-adenosine diphosphate complex, acetyl coenzyme A and malonyl coenzyme A with detection by ultraviolet absorption at 256 nm. When Mg²⁺ was absent from the separation buffer, the zones due to magnesium-adenosine triphosphate complex and magnesium-adenosine diphosphate complex both split and migrated as two separate peaks. With Mg²⁺ added to the separation buffer, magnesium-adenosine triphosphate complex and magnesium-adenosine diphosphate complex produced single peaks, and the reproducibility of peak shape and area improved for human acetyl-coenzyme A carboxylase 2 assay components. The final separation buffer used was 30.0 mM HEPES, 3.0 mM MgCl₂ , 2.5 mM KHCO₃ , and 2.5 mM potassium citrate at pH 7.50. The same buffer was used for the enzyme-catalyzed reaction (off-column). Inhibition of human acetyl-coenzyme A carboxylase 2 by CP-640186, a known inhibitor, was detected using the capillary electrophoresis assay.

On-line coupling between capillary electrophoresis and microscale thermophoresis (CE-MST); the proof-of-concept

We demonstrate that microscale thermophoresis can be easily coupled with capillary electrophoresis in an on-line flow system (CE-MST), offering new potential possibilities. It takes advantage of sample separation and miniaturization prior to thermo-optical/MST analysis. No instrument modification is required. The future perspective is discussed.

Recent advances in screening of enzymes inhibitors based on capillary electrophoresis

Capillary electrophoresis with many advantages plays an important role in pharmaceutical analysis and drug screening. This review gives an overview on the recent advances in the developments and applications of capillary electrophoresis in the field of enzyme inhibitor screening. The period covers 2013 to 2017. Both the pre-capillary enzyme assays and in-capillary enzyme assays which include electrophoretically mediated microanalysis (EMMA) and immobilized enzyme microreactor (IMER) are summarized in this article.

Computer simulation of the enantioselective separation of weak bases in an online capillary electrophoresis based microanalysis configuration comprising sulfated cyclodextrin as selector

Computer simulation was utilized to characterize the electrophoretic processes occurring after reactant mixing in an online assay format used for monitoring the enantioselective N-demethylation of ketamine to norketamine in the presence of highly sulfated γ-cyclodextrin (HS-γ-CD). The incubated reaction mixture (at pH 7.4 and without chiral selector) is bracketed by a low pH BGE containing 2% HS-γ-CD as chiral selector, thereby forming a discontinuous buffer system. Upon power application, simulation provides insight into the formation of moving boundaries and new zones together with the prediction of the behavior of ketamine and norketamine enantiomers. The analytes first migrate cationically in a zone electrophoretic manner until they come in contact with HS-γ-CD upon which enantioseparation is initiated. Complexation has a focusing effect and the electrophoretic transport becomes reversed, that is, toward the anode. Simulation revealed that the initial conditions for the chiral separation, including buffer components concentrations, pH, and ionic strength, are different than those in the BGE. As a consequence thereof, the experimentally determined complexation parameters for the BGE were unable to correctly describe the migration behavior of the analytes in this column section. An increase in the input binding constants by a factor of two to four, as a result of the decreased ionic strength, resulted in simulation data that agreed with experimental findings.