Lipase in aqueous-polar organic solvents: activity, structure, and stability

Hydrolysis of ionic liquid-treated substrate with an Iocasia fonsfrigidae strain SP3-1 endoglucanase

Recently, we reported the discovery of a novel endoglucanase of the glycoside hydrolase family 12 (GH12), designated IfCelS12A, from the haloalkaliphilic anaerobic bacterium Iocasia fonsfrigidae strain SP3-1, which was isolated from a hypersaline pond in the Samut Sakhon province of Thailand (ca. 2017). IfCelS12A exhibits high substrate specificity on carboxymethyl cellulose and amorphous cellulose but low substrate specificity on b-1,3;1,4-glucan. Unlike some endoglucanases of the GH12 family, IfCelS12A does not exhibit hydrolytic activity on crystalline cellulose (i.e., Avicel™). High-Pressure Liquid Chromatography (HPLC) and Thin Layer Chromatography (TLC) analyses of products resulting from IfCelS12-mediated hydrolysis indicate mode of action for this enzyme. Notably, IfCelS12A preferentially hydrolyzes cellotetraoses, cellopentaoses, and cellohexaoses with negligible activity on cellobiose or cellotriose. Kinetic analysis with cellopentaose and barely b-D-glucan as cellulosic substrates were conducted. On cellopentaose, IfCelS12A demonstrates a 16-fold increase in activity (KM = 0.27 mM; kcat = 0.36 s-1; kcat/KM = 1.34 mM-1 s-1) compared to the enzymatic hydrolysis of barley b-D-glucan (KM: 0.04 mM, kcat: 0.51 s-1, kcat/KM = 0.08 mM-1 s-1). Moreover, IfCelS12A enzymatic efficacy is stable in hypersaline sodium chlorids (NaCl) solutions (up to 10% NaCl). Specifically, IfCel12A retains notable activity after 24 h at 2M NaCl (10% saline solution). IfCelS12A used as a cocktail component with other cellulolytic enzymes and in conjunction with mobile sequestration platform technology offers additional options for deconstruction of ionic liquid-pretreated cellulosic feedstock. KEY POINTS: • IfCelS12A from an anaerobic alkaliphile Iocasia fronsfrigidae shows salt tolerance • IfCelS12A in cocktails with other enzymes efficiently degrades cellulosic biomass • IfCelS12A used with mobile enzyme sequestration platforms enhances hydrolysis.

Combined cross-linking of Rhizomucor miehei lipase and Candida antarctica lipase B for the effective enrichment of omega-3 fatty acids in fish oil

The incorporation of a non-specific lipase and a sn-1,3 specific one in a single immobilized system can be a promising approach for the exploitation of both lipases. A one-step immobilization platform mediated by an isocyanide-based multi-component reaction was applied to create co-cross-linked enzymes (co-CLEs) of lipases from Rhizomucor miehei (sn-1,3 specific) and Candida antarctica (non-specific). Glutaraldehyde was found to be effective cross-linker by producing specific activity of 16.9 U/mg and immobilization yield of 99 %. High activity recovery of up to 404 % was obtained for immobilized derivatives. Leaking experiment showed covalent nature of the cross-linking processes. BSA had considerable effect on the immobilization process, providing 87-100 % immobilization yields and up to 10 times improvement in the specific activity of the immobilized derivatives. Scanning electron microscopy images showed flower-like and rod-like structures for the CLEs prepared by glutaraldehyde and undecanedicarboxylic acid, respectively. The prepared co-CLEs were examined in non-selective enrichment of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) from fish oil, showing capability of releasing up to 100 % of both omega-3 fatty acids within 8 h of the reaction. The reusability of co-CLEs in five successive cycles presented retaining 63-72 % of their initial activities after the fifth reuse cycle in the hydrolysis reaction.

β-Glucosidase on clay minerals: Structure and function in the synthesis of octyl glucoside

β-Glucosidase is a biological macromolecule that catalyzes the hydrolysis of various glycosides and oligosaccharides. It may also be used to catalyze the synthesis of glycosides under suitable conditions. Carrier-bound β-glucosidase can enhance the enzymatic activity in the synthesis of glycosides in organic solvent solutions, although the molecular mechanism regulating activity is yet unknown. This study investigated the impact of utilizing montmorillonite (Mmt), attapulgite (Attp), and kaolinite (Kao) as carriers on the activity of β-glucosidase from Prunus dulcis (PdBg). When Attp was used as carriers, the molecular dynamic (MD) simulations found the distance between pNPG and the active site residues E183 and E387 was minimally impacted by the adsorptions, hence PdBg maintained about 81.3 ± 0.89 % of its native activity. Out of the three clay minerals, the relative activity of PdBg loaded on Mmt was the lowest because of the highest electrostatic energy. The substrate channel of PdBg on Kao is directed towards the surface, limiting the accessibility of substrates. Secondary structure and conformation studies revealed that the conformational stability of PdBg in solvent solutions was enhanced by coupling to Attp. Unlike dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF) and 1,2-dimethoxyethane (DME), tert-butanol (t-BA) did not penetrate into the active site of PdBg interfering with its binding to the substrate. The maximum yield of n-octyl-β-glucoside (OGP) synthesis catalyzed by Attp-immobilized PdBg reached 48.3 %.

Engineered Geobacillus lipolytic enzymes - Attractive polyesterases that degrade polycaprolactones and simultaneously produce esters

Plastic pollution is one of the biggest environmental problems plaguing the modern world. Polyester-based plastics contribute significantly to this ecological safety concern. In this study, lipolytic biocatalysts GD-95RM and GDEst-lip developed based on lipase/esterase produced by Geobacillus sp. 95 strain were applied for the degradation of polycaprolactone films (Mn 45.000 (PCL45000) and Mn 80.000 (PCL80000)). The degradation efficiency was significantly enhanced by the addition of short chain alcohols. Lipase GD-95RM (1 mg) can depolymerize 264.0 mg and 280.7 mg of PCL45000 and PCL80000, films respectively, in a 24 h period at 30 °C, while the fused enzyme GDEst-lip (1 mg) is capable of degrading 145.5 mg PCL45000 and 134.0 mg of PCL80000 films in 24 h. The addition of ethanol (25 %) improves the degradation efficiency ~2.5 fold in the case of GD-95RM. In the case of GDEst-lip, 50 % methanol was found to be the optimal alcohol solution and the degradation efficiency was increased by ~3.25 times. The addition of alcohols not only increased degradation speeds but also allowed for simultaneous synthesis of industrially valuable 6-hydroxyhexonic acid esters. The suggested system is an attractive approach for removing of plastic waste and supports the principles of bioeconomics.

Cloning and characterization of an acidic lipase from a lipolytic bacterium in tempeh

BACKGROUND

Lipases have emerged as essential biocatalysts, having the ability to contribute to a wide range of industrial applications. Microbial lipases have garnered significant industrial attention due to their stability, selectivity, and broad substrate specificity. In the previous study, a unique lipolytic bacterium (Micrococcus luteus EMP48-D) was isolated from tempeh. It turns out the bacteria produce an acidic lipase, which is important in biodiesel production. Our main objectives were to clone the acidic lipase and investigate its potential in biodiesel production.

RESULT

In this study, the gene encoding a lipase from M. luteus EMP48-D was cloned and expressed heterologously in Escherichia coli. To our knowledge, this is the first attempt at the cloning and expression of the lipase gene from Micrococcus luteus. The amino acid sequence was deduced from the nucleotide sequence (1356 bp) corresponded to a protein of 451 amino acid residues with a molecular weight of about 40 kDa. The presence of a signal peptide suggested that the protein was extracellular. A sequence analysis revealed that the protein had a lipase-specific Gly-X-Ser-X-Gly motif. The enzyme was identified as an acidic lipase with a pH preference of 5.0. Fatty acid preferences for enzyme activities were C8 and C12 (p-nitrophenyl esters), with optimum temperatures at 30-40 °C and still remaining active at 80°C. The enzyme was also shown to convert up to 70% of the substrate into fatty acid methyl ester.

CONCLUSION

The enzyme was a novel acidic lipase that demonstrated both hydrolytic and transesterification reactions. It appeared particularly promising for the synthesis of biodiesel as this enzyme's catalytic reaction was optimum at low temperatures and was still active at high temperatures.

Effects of kosmotropic, chaotropic, and neutral salts on Candida antarctica B lipase: An analysis of the secondary structure and its hydrolytic activity on triglycerides

The effects of different concentrations of Hofmeister salts on the hydrolytic activity on triglycerides and the secondary structure of lipase B from Candida antarctica (CALB) were investigated. Structural changes after short- and long-time incubation at high salt concentrations were determined using circular dichroism (CD), fluorescence, and RMSD-RMSF simulations. At 5.2 M NaCl, the hydrolytic activity of CALB on tributyrin (TC4) and trioctanoin (TC8) was enhanced by 1.5 (from 817 ± 3.9 to 1228 ± 4.3 U/mg)- and 8.7 (from 25 ± 0.3 to 218 ± 2.3 U/mg)-folds compared with 0.15 M NaCl, respectively at pH 7.0 and 40 °C. An activity activation was seen with other salts tested; however, long-time incubation (24 h) did not result in retention of the activation effect for any of the salts tested. Secondary structure CD and fluorescence spectra showed that long-time incubation with NaCl, KCl, and CsCl provokes a compact structure without loss of native conformation, whereas chaotropic LiCl and CaCl2 induced an increase in the α-helical content, and kosmotropic Na2SO4 provoked a molten globule state with rich β-sheet content. The RMSD-RMSF simulation agreed with the CD analysis, highlighting a principal salt-induced effect at the α-helix 5 region, promoting two different conformational states (open and closed) depending on the type and concentration of salt. Lastly, an increase in the interfacial tension occurred when high salt concentrations were added to the reaction media, affecting the catalytic properties. The results indicate that high-salt environments, such as 2-5.2 M NaCl, can be used to increase the lipolytic activity of CALB on TC4 and TC8.

Improving ethanol tolerance of ethyl carbamate hydrolase by diphasic high pressure molecular dynamic simulations

Ethyl carbamate (EC) is mainly found in fermented foods and fermented alcoholic beverages, which could cause carcinogenic potential to humans. Reducing EC is one of the key research priorities to address security of fermented foods. Enzymatic degradation of EC with EC hydrolase in food is the most reliable and efficient method. However, poor tolerance to ethanol severely hinders application of EC hydrolase. In this study, the mutants of EC hydrolase were screened by diphasic high pressure molecular dynamic simulations (dHP-MD). The best variant with remarkable improvement in specific activity and was H68A/K70R/S325N, whose specific activity was approximately 3.42-fold higher than WT, and relative enzyme activity under 20% (v/v) was 5.02-fold higher than WT. Moreover, the triple mutant increased its stability by acquiring more hydration shell and forming extra hydrogen bonds. Furthermore, the ability of degrading EC of the immobilized triple mutant was both detected in mock wine and under certain reaction conditions. The stability of immobilized triple mutant and WT were both improved, and immobilized triple mutant degraded nearly twice as much EC as that of immobilized WT. Overall, dHP-MD was proved to effectively improve enzyme activity and ethanol tolerance for extent application at industrial scale.

Recent Advances in the Enzymatic Synthesis of Polyester

Polyester is a kind of polymer composed of ester bond-linked polybasic acids and polyol. This type of polymer has a wide range of applications in various industries, such as automotive, furniture, coatings, packaging, and biomedical. The traditional process of synthesizing polyester mainly uses metal catalyst polymerization under high-temperature. This condition may have problems with metal residue and undesired side reactions. As an alternative, enzyme-catalyzed polymerization is evolving rapidly due to the metal-free residue, satisfactory biocompatibility, and mild reaction conditions. This article presented the reaction modes of enzyme-catalyzed ring-opening polymerization and enzyme-catalyzed polycondensation and their combinations, respectively. In addition, the article also summarized how lipase-catalyzed the polymerization of polyester, which includes (i) the distinctive features of lipase, (ii) the lipase-catalyzed polymerization and its mechanism, and (iii) the lipase stability under organic solvent and high-temperature conditions. In addition, this article also focused on the advantages and disadvantages of enzyme-catalyzed polyester synthesis under different solvent systems, including organic solvent systems, solvent-free systems, and green solvent systems. The challenges of enzyme optimization and process equipment innovation for further industrialization of enzyme-catalyzed polyester synthesis were also discussed in this article.

The In Vitro Inhibitory Effect of Selected Asteraceae Plants on Pancreatic Lipase Followed by Phenolic Content Identification through Liquid Chromatography High Resolution Mass Spectrometry (LC-HRMS)

Pancreatic lipase (PNLIP, EC 3.1.1.3) plays a pivotal role in the digestion of dietary lipids, a metabolic pathway directly related to obesity. One of the effective strategies in obesity treatment is the inhibition of PNLIP, which is possible to be achieved by specific phenolic compounds occurring in high abundance in some plants. In this study, a multidisciplinary approach is presented investigating the PNLIP inhibitory effect of 33 plants belonging in the Asteraceae botanical family. In the first stage of the study, a rapid and cost-efficient PNLIP assay in a 96-microwell plate format was developed and important parameters were optimized, e.g., the enzyme substrate. Upon PNLIP assay optimization, aqueous and dichloromethane Asteraceae plant extracts were tested and a cut-off inhibition level was set to further analyze only the samples with a significant inhibitory effect (inhibitory rate > 40%), using an ultra-high-performance liquid chromatography hybrid quadrupole time-of-flight mass spectrometry (UHPLC-q-TOF-MS) method. Specifically, a metabolomic suspect screening was performed and 69 phenolic compounds were tentatively identified, including phenolic acids, flavonoids, flavonoid-3-O-glycosides, and flavonoid-7-O-glycosides, amongst others. In the case of aqueous extracts, phytochemicals known for inducing PNLIP inhibitory effect, e.g., compounds containing galloyl molecules or caffeoylquinic acids, were monitored in Chrysanthemum morifolium, Grindella camporum and Hieracium pilosella extracts. All in all, the presented approach combines in vitro bioactivity measurements to high-end metabolomics to identify phenolic compounds with potential medicinal and/or dietary applications.

Biochemical and Physical Characterization of Immobilized Candida rugosa Lipase on Metal Oxide Hybrid Support

Enzyme immobilization on inorganic materials is gaining more attention with the potential characteristics of high-surface-area-to-volume ratios, increasing the efficiency of enzyme loading on the support. Metal oxide hybrid support was prepared by a wetness impregnation of five metal precursors, including CaO, CuO, MgO, NiO, and ZnO, on Al2O3 and used as a support for the immobilization of Candida rugosa lipase (CRL) by adsorption. Maximum activity recovery (70.6%) and immobilization efficiency (63.2%) were obtained after optimization of five parameters using response surface methodology (RSM) by Box–Behnken design (BBD). The biochemical properties of immobilized CRL showed high thermostability up to 70 °C and a wide range in pH stability (pH 4–10). TGA-DTA and FTIR analysis were conducted, verifying thermo-decomposition of lipase and the presence of an amide bond. FESEM-EDX showed the homogeneous distribution and high dispersion of magnesium and CRL on MgO-Al2O3, while a nitrogen adsorption–desorption study confirmed MgO-Al2O3 as a mesoporous material. CRL/MgO-Al2O3 can be reused for up to 12 cycles and it demonstrated high tolerance in solvents (ethanol, isopropanol, methanol, and tert-butanol) compared to free CRL.

Different Effects of Salt Bridges near the Active Site of Cold-Adapted Proteus mirabilis Lipase on Thermal and Organic Solvent Stabilities

Organic solvent-tolerant (OST) enzymes have been discovered in psychrophiles. Cold-adapted OST enzymes exhibit increased conformational flexibility in polar organic solvents resulting from their intrinsically flexible structures. Proteus mirabilis lipase (PML), a cold-adapted OST lipase, was used to assess the contribution of salt bridges near the active site involving two arginine residues (R237 and R241) on the helix η1 and an aspartate residue (D248) on the connecting loop to the thermal and organic solvent stabilities of PML. Alanine substitutions for the ion pairs (R237A, R241A, D248A, and R237A/D248A) increased the conformational flexibility of PML mutants compared to that of the wild-type PML in an aqueous buffer. The PML mutants became more susceptible to denaturation after increasing the dimethyl sulfoxide or methanol concentration than after a temperature increase. Methanol was more detrimental to the structural stability of PML compared to dimethyl sulfoxide. These results suggest that direct interactions of dimethyl sulfoxide and methanol with the residues near the active site can have a destructive effect on the structure of PML compared with the global effect of heat on the protein structure. This study provides insight into the conformational changes within an OST enzyme with different effects on its thermal and organic solvent stabilities.

Advanced Insights into Catalytic and Structural Features of the Zinc-Dependent Alcohol Dehydrogenase from Thauera aromatica

The asymmetric reduction of ketones to chiral hydroxyl compounds by alcohol dehydrogenases (ADHs) is an established strategy for the provision of valuable precursors for fine chemicals and pharmaceutics. However, most ADHs favor linear aliphatic and aromatic carbonyl compounds, and suitable biocatalysts with preference for cyclic ketones and diketones are still scarce. Among the few candidates, the alcohol dehydrogenase from Thauera aromatica (ThaADH) stands out with a high activity for the reduction of the cyclic α‐diketone 1,2‐cyclohexanedione to the corresponding α‐hydroxy ketone. This study elucidates catalytic and structural features of the enzyme. ThaADH showed a remarkable thermal and pH stability as well as stability in the presence of polar solvents. A thorough description of the substrate scope combined with the resolution and description of the crystal structure, demonstrated a strong preference of ThaADH for cyclic α‐substituted cyclohexanones, and indicated structural determinants responsible for the unique substrate acceptance.

Endophytic fungi: a potential source of industrial enzyme producers

Microbial enzymes have gained interest for their widespread use in various industries and medicine due to their stability, ease of production, and optimization. Endophytic fungi in plant tissues produce a wide range of secondary metabolites and enzymes, which exhibit a variety of biological activities. The present review illustrates promising applications of enzymes produced by endophytic fungi and discusses the characteristic features of the enzymes, application of the endophytic fungal enzymes in therapeutics, agriculture, food, and biofuel industries. Endophytic fungi producing ligninolytic enzymes have possible biotechnological applications in lignocellulosic biorefineries. The global market of industrially important enzymes, challenges, and future prospects are illustrated. However, the commercialization of endophytic fungal enzymes for industrial purposes is yet to be explored. The present review suggests that endophytic fungi can produce various enzymes and may become a novel source for upscaling the production of enzymes of industrial use.

Short-chain alcohols inactivate an immobilized industrial lipase through two different mechanisms

Broadly used in biocatalysis as acyl acceptors or (co)-solvents, short-chain alcohols often cause irreversible loss of enzyme activity. Understanding the mechanisms of inactivation is a necessary step toward the optimization of biocatalytic reactions and the design of enzyme-based sustainable processes. In this work, we explored the functional and structural response of an immobilized enzyme, Novozym 435, exposed to methanol, ethanol, and tert-butanol. N-435 consists of Candida antarctica lipase B (CALB) adsorbed on polymethacrylate beads and finds application in a variety of processes involving the presence of short-chain alcohols. The nature of the N-435 material required the development of an ad hoc method of structural analysis, based on Fourier transform infrared microspectroscopy, which was complemented by catalytic activity assays and by morphological observation by transmission electron microscopy. We found that the inactivation of N-435 is highly dependent on alcohol concentration and occurs through two different mechanisms. Short-chain alcohols induce conformational changes leading to CALB aggregation, which is only partially prevented by immobilization. Moreover, alcohol modifies the texture of the solid support promoting the enzyme release. Overall, knowledge of the molecular mechanisms underlying Novozym 435 inactivation induced by short-chain alcohols promises to overcome the limitations that usually occur during industrial processes. This article is protected by copyright. All rights reserved.

Post-Synthetic Enzymatic and Chemical Modifications for Novel Sustainable Polyesters

Because of their biodegradability, compostability, compatibility and flexible structures, biodegradable polymers such as polyhydroxyalkanoates (PHA) are an important class of biopolymers with various industrial and biological uses. PHAs are thermoplastic polyesters with a limited processability due to their low heat resistance. Furthermore, due to their high crystallinity, some PHAs are stiff and brittle. These features result sometimes in very poor mechanical characteristics with low extension at break values which limit the application range of some natural PHAs. Several in vivo approaches for PHA copolymer modifications range from polymer production to enhance PHA-based material performance after synthesis. The methods for enzymatic and chemical polymer modifications are aiming at modifying the structures of the polyesters and thereby their characteristics while retaining the biodegradability. This survey illustrates the efficient use of enzymes and chemicals in post-synthetic PHA modifications, offering insights on these green techniques for modifying and improving polymer performance. Important studies in this sector will be reviewed, as well as chances and obstacles for their stability and hyper-production.

Enzymatic synthesis of 2-phenethyl acetate in water catalyzed by an immobilized acyltransferase from Mycobacterium smegmatis

Although water is an ideal green solvent for organic synthesis, it is difficult for most biocatalysts to carry out transesterification reactions in water because of the reversible hydrolysis reaction. 3D structural characteristics and the microenvironment of an enzyme has an important effect on its selectivity for the transesterification reaction over the hydrolysis reaction. A novel 2-phenethyl acetate synthesis technology was developed using acyltransferase (EC 3.1.1.2) from Mycobacterium smegmatis (MsAcT) in water. Firstly, MsAcT was entrapped in a tetramethoxysilane gel network and the immobilization process of MsAcT increased its selectivity for the transesterification reaction over the hydrolysis reaction by 6.33-fold. Then, the synthesis technology of 2-phenethyl acetate using the immobilized MsAcT in water was optimized as follows: vinyl acetate was used as acyl donor, the molar ratio of vinyl acetate to 2-phenylethyl alcohol was 2 : 1, and the water content was 80% (w/w). The reaction was carried out at 40 °C for 30 min and conversion rate reached 99.17%. The immobilized MsAcT could be recycled for 10 batches. The synthesis method of 2-phenethyl acetate using MsAcT as a biocatalyst in water is a prospective green process technology.

Although water is an ideal green solvent for organic synthesis, it is difficult for most biocatalysts to carry out transesterification reactions in water because of the reversible hydrolysis reaction.

Using Molecular Simulation to Guide Protein Engineering for Biocatalysis in Organic Solvents

Biocatalysis in organic solvents (OSs) is very appealing for the industry in producing bulk and/or fine chemicals, such as pharmaceuticals, biodiesel, and fragrances. The poor performance of enzymes in OSs (e.g., reduced activity, insufficient stability, and deactivation) negates OSs' excellent solvent properties. Molecular dynamics (MD) simulations provide a complementary method to study the relationship between enzymes dynamics and the stability in OSs. Here we describe computational procedure for MD simulation of enzymes in OSs with an example of Bacillus subtilis lipase A (BSLA) in dimethyl sulfoxide (DMSO) cosolvent with software GROMACS. We discuss main essential practical issues considered (such as choice of force field, parameterization, simulation setup, and trajectory analysis). The core part of this protocol (enzyme-OS system setup, analysis of structural-based and solvation-based observables) is transferable to other enzymes and any OS systems. Combining with experimental studies, the obtained molecular knowledge is most likely to guide researchers to access rational protein engineering approaches to tailor OS resistant enzymes and expand the scope of biocatalysis in OS media. Finally, we discuss potential solutions to overcome the remaining challenges of computational biocatalysis in OSs and briefly draw future directions for further improvement in this field.

Ancestral Sequence Reconstruction of Ancient Lipase from Family I.3 Bacterial Lipolytic Enzymes

Family I.3 lipase is distinguished from other families by the amino acid sequence and secretion mechanism. Little is known about the evolutionary process driving these differences. This study attempt to understand how the diverse temperature stabilities of bacterial lipases from family I.3 evolved. To achieve that, eighty-three protein sequences sharing a minimum 30% sequence identity with Antarctic Pseudomonas sp. AMS8 lipase were used to infer phylogenetic tree. Using ancestral sequence reconstruction (ASR) technique, the last universal common ancestor (LUCA) sequence of family I.3 was reconstructed. A gene encoding LUCA was synthesized, cloned and expressed as inclusion bodies in E. coli system. Insoluble form of LUCA was refolded using urea dilution method and then purified using affinity chromatography. The purified LUCA exhibited an optimum temperature and pH at 70℃ and 10 respectively. Various metal ions increased or retained the activity of LUCA. LUCA also demonstrated tolerance towards various organic solvents in 25% v/v concentration. The finding from this study could support the understanding on temperature and environment during ancient time. In overall, reconstructed ancestral enzymes have improved physicochemical properties that make them suitable for industrial applications and ASR technique can be employed as a general technique for enzyme engineering.

Effect of Organic Solvents on the Structure and Activity of a Minimal Lipase

Lipases are ubiquitously used in chemo-enzymatic synthesis and industrial applications. Nevertheless, the modulation of the activity of lipases by organic solvents still is not fully understood at the molecular level. We systematically investigated the activity and structure of lipase A from Bacillus subtilis in binary water-organic solvent mixtures of dimethyl sulfoxide (DMSO), acetonitrile (ACN), and isopropyl alcohol (IPA) using activity assays, fluorescence spectroscopy, molecular dynamics (MD) simulations, and FRET/MD analysis. The enzymatic activity strongly depended on the type and amount of organic solvent in the reaction media. Whereas IPA and ACN reduced the activity of the enzyme, small concentrations of DMSO led to lipase activation via an uncompetitive mechanism. DMSO molecules did not directly interfere with the binding of the substrate in the active site, contrary to what is known for other solvents and enzymes. We propose that the His156-Asp133 interaction, the binding of organic molecules to the active site, and the water accessibility of the substrate are key factors modulating the catalytic activity. Furthermore, we rationalized the role of solvent descriptors on the regulation of enzymatic activity in mixtures with low concentrations of the organic molecule, with prospective implications for the optimization of biocatalytic processes via solvent tuning.

Ethanol as additive enhance the performance of immobilized lipase LipA from Pseudomonas aeruginosa on polypropylene support

Immobilization is practical to upgrade enzymes, increasing their performance and expanding their applications. The recombinant, solvent tolerant lipase LipA PSA01 from Pseudomonas aeruginosa was immobilized on polypropylene Accurel® MP1004 to improve its performance. We investigated the effect of ethanol as an additive during the immobilization process at three concentrations (20%, 25%, and 30%) on the operational behavior of the enzyme. The immobilization efficiency was higher than 92%, and the immobilized enzymes showed hyperactivation and thermal resistance depending on the concentration of ethanol. For example, at 70 °C, the free enzyme lost the activity, while the prepared one with ethanol 25% conserved a residual activity of up to 73.3% (∆ T¹⁵ ₅₀ = 27.1 °C). LipA immobilized had an optimal pH value lower than that of the free enzyme, and the organic solvent tolerance of the immobilized enzymes depended on the ethanol used. Hence, the immobilized enzyme with ethanol 25% showed hyperactivation to more solvents than the soluble enzyme. Remarkable stability towards methanol (up to 8 folds) was evidenced in all the immobilized preparations. The immobilized enzyme changed their chemo preference, and it hydrolyzed oils preferentially with short-chain than those with long-chain. LipA had a notable shelf-life after one year, keeping its activity up to 87%. Ethanol facilitated the access of the enzyme to the hydrophobic support and increased its activity and stability according to the amount of ethanol added.

Identification and Heterologous Production of a Lipase from Geobacillus kaustophilus DSM 7263T and Tailoring Its N-Terminal by a His-Tag Epitope

Lipases are versatile biocatalysts with many biotechnological applications and the necessity of screening, production and characterization of new lipases from diverse microbial strains to meet industrial needs is constantly emerging. In this study, the lipase gene (gklip) from a thermophilic bacterium, Geobacillus kaustophilus DSM 7263 ^T was cloned into the pET28a ( +) vector with N-terminal 6xHis-tag. The recombinant gklip gene was heterologously expressed in host E. coli BL21 (DE3) cells and purified by Ni-NTA affinity chromatography. Histidine tag was removed from the purified 6xHistag-Gklip enzyme with thrombin enzyme and the molecular mass was determined to be approximately 43 kDa by SDS-PAGE. Gklip showed optimal activity at pH 8.0 and 50 °C. The specific hydrolytic activities against substrates were significantly increased by the removal of the His-tag. K_m and k_cat values of Gklip against p-nitrophenyl palmitate (pNPP, 4-nitrophenyl palmitate) as the target substrate were found to be as 1.22 mM and 417.1 min^-1, respectively. Removing His-tag changed the substrate preference of the enzyme leading to maximum lipolytic activity towards C10 and C12 lipids. Similarly, the activity against coconut oil that containing 62% medium-chain fatty acids was significantly higher than other oils. Furthermore, preservation of activity in the presence of inhibitors, organic solvents support the effect of lid structure of the enzyme.

Stability comparison of four lipases and catalytic mechanism during the synthesis of 1,3-di-oleic-2-medium chain triacylglycerols in a trace water-in-oil system: Experimental analyses and computational simulations

In the present study, a kind of structured lipids, namely 1,3-di-oleic-2-medium chain (OMO) triacylglycerols, were synthesized through lipase-catalyzed reactions using coconut oil and rapeseed acid as materials in a trace water-in-oil system. Experimental analysis and computational simulations were undertaken to compare the stability of four lipases including Lipozyme RMIM, Lipozyme TLIM, Novozym 435, and Aspergillus oryzae immobilized lipase (AOIM), and illustrate catalytic mechanism of Novozym 435 during the synthesis of OMO. Fourier transform infrared and molecular dynamics simulation results demonstrated that a decrease in ordered structure (α-helix and β-sheet) led to a reduction in enzyme activity. Compared with Lipozyme RMIM and Novozym 435, Lipozyme TLIM and AOIM exhibited better stability due to a short-chain lid in TLIM, which covers activity sites, and hydrogen bonds formed between activity center of AOIM and water. Among four lipases, AOIM exhibited best catalytic performance: a OMO yield of 30.7% at 3 hr and a good stability of long term (48 hr). Density functional theory results demonstrated that specifically, during the synthesis of OMO triacylglycerol, the addition of Novozym 435 (derived from Candida antarctica lipase B, CALB) substantially lowered reaction barriers (64.4 KJ/mol with CALB vs. 332.7 KJ/mol with no lipase), aiding in the generation of OMO because of the formations of transitional tetrahedral intermediates. A trace water-in-oil system was a green and efficient alternative for lipase-catalyzed production of OMO, and this study provided crucial insights into the stability/instability and catalytic mechanisms of lipase in the synthesis of structured lipids. PRACTICAL APPLICATIONS: We compared the stability of Lipozyme RMIM, Lipozyme 435, Lipozyme TLIM, and AOIM during the synthesis of the OMO triacylglycerols in a trace water-in-oil system, where exhibited a high catalytic activity of lipase in water-oil interface. AOIM had the highest stability and showed the best catalytic performance due to the formation of hydrogen bonds. Besides, for the first time, the transition tetrahedral structure was revealed in the enzymatic synthesis of medium- and long-chain triacylglycerols. This study provides a rational approach to compare lipase stability and a possible hint to choose appropriate enzyme in a specific catalytic condition.

Enhancing the stability of Geobacillus zalihae T1 lipase in organic solvents and insights into the structural stability of its variants

Critical to the applications of proteins in non-aqueous enzymatic processes is their structural dynamics in relation to solvent polarity. A pool of mutants derived from Geobacillus zalihae T1 lipase was screened in organic solvents (methanol, ethanol, propanol, butanol and pentanol) resulting in the selection of six mutants at initial screening (A83D/K251E, R21C, G35D/S195 N, K84R/R103C/M121I/T272 M and R106H/G327S). Site-directed mutagenesis further yielded quadruple mutants A83D/M121I/K251E/G327S and A83D/M121I/S195 N/T272 M, both of which had improved activity after incubation in methanol. The k_m and k_cat values of these mutants vary marginally with the wild-type enzyme in the methanol/substrate mixture. Thermally induced unfolding of mutants was accompanied with some loss of secondary structure content. The root mean square deviations (RMSD) and B-factors revealed that changes in the structural organization are intertwined with an interplay of the protein backbone with organic solvents. Spatially exposed charged residues showed correlations between the solvation dynamics of the methanol solvent and the hydrophobicity of the residues. The short distances of the radial distribution function provided the required distances for hydrogen bond formation and hydrophobic interactions. These dynamic changes demonstrate newly formed structural interactions could be targeted and incorporated experimentally on the basis of solvent mobility and mutant residues.

Integral Stereoselectivity of Lipase Based on the Chromatographic Resolution of Enantiomeric/Regioisomeric Diacylglycerols

Stereoselectivity, a distinctive characteristic of lipase (EC 3.1.1.3), refers to the ability to differentiate between enantiomeric positions (sn-1 and sn-3) in triacylglycerol (TAG). This property has been determined based on the time course of enantiomeric excess of diacylglycerol (DAG) considering several consecutive steps of lipase-catalyzed hydrolysis of TAG; however, this concept is insufficient to represent the true nature of lipases which are capable of hydrolyzing the sn-2 position of TAG under the condition acyl migration occurs. Here, we suggest "integral stereoselectivity" to capture the preference of lipases for all ester groups of both TAG and DAG, as a novel index of the stereochemistry of lipase. To determine integral stereoselectivity, we established an analytical system based on the chromatographic resolution of dioleoylglycerol (DO) enantiomers and regioisomers. DO enantiomers were derivatized with 4-nitrophenyl isocyanate, and subsequently, resolved by chiral-phase high-performance liquid chromatography-ultraviolet. Regioisomers of monooleoylglycerol and DO were analyzed by HPLC with an evaporative light-scattering detector. Time-course analysis of three model lipases involved in the hydrolysis of trioleoylglycerol validated the analytical system designed to determine the integral stereoselectivity. As an accurate indicator of lipase stereochemistry reflecting all hydrolysis steps, integral stereoselectivity can expedite the development of lipases with unique stereochemistry from agricultural sources and their application to the food industry.

Candida antarctica lipase-B-catalyzed kinetic resolution of 1,3-dialkyl-3-hydroxymethyl oxindoles

Candida antarctica (CAL-B) lipase-catalyzed resolution of 1,3-dialkyl-3-hydroxymethyl oxindoles has been performed to obtain (R)-1,3-dialkyl-3-acetoxymethyl oxindoles with up to 99% ee and (S)-1,3-dialkyl-3-hydroxymethyl oxindoles with up to 78% ee using vinyl acetate as acylating agent and acetonitrile as solvent transforming (S)-3-allyl-3-hydroxymethyl oxindole to (3S)-1'-benzyl-5-(iodomethyl)-4,5-dihydro-2H-spiro[furan-3,3'-indolin]-2'-one. The optically active 3-substituted-3-hydroxymethyl oxindoles and spiro-oxindoles are among the key synthons in the synthesis of potentially biologically active molecules.

Counterbalance of Stability and Activity Observed for Thermostable Transaminase from Thermobaculum terrenum in the Presence of Organic Solvents

Pyridoxal-5’-phosphate-dependent transaminases catalyze stereoselective amination of organic compounds and are highly important for industrial applications. Catalysis by transaminases often requires organic solvents to increase the solubility of reactants. However, natural transaminases are prone to inactivation in the presence of water-miscible organic solvents. Here, we present the solvent tolerant thermostable transaminase from Thermobaculum terrenum (TaTT) that catalyzes transamination between L-leucine and alpha-ketoglutarate with an optimum at 75 °C and increases the activity ~1.8-fold upon addition of 15% dimethyl sulfoxide or 15% methanol at high but suboptimal temperature, 50 °C. The enhancement of the activity correlates with a decrease in the thermal denaturation midpoint temperature. The blue-shift of tryptophan fluorescence suggested that solvent molecules penetrate the hydration shell of the enzyme. Analysis of hydrogen bonds in the TaTT dimer revealed a high number of salt bridges and surface hydrogen bonds formed by backbone atoms. The latter are sensitive to the presence of organic solvents; they rearrange, conferring the relaxation of some constraints inherent to a thermostable enzyme at low temperatures. Our data support the idea that the counterbalance of stability and activity is crucial for the catalysis under given conditions; the obtained results may be useful for fine-tuning biocatalyst efficiency.

The Role of Surface Exposed Lysine in Conformational Stability and Functional Properties of Lipase from Staphylococcus Family

Surface charge residues have been recognized as one of the stability determinants in protein. In this study, we sought to compare and analyse the stability and conformational dynamics of staphylococcal lipase mutants with surface lysine mutation using computational and experimental methods. Three highly mutable and exposed lysine residues (Lys91, Lys177, Lys325) were targeted to generate six mutant lipases in silico. The model structures were simulated in water environment at 25 °C. Our simulations showed that the stability was compromised when Lys177 was substituted while mutation at position 91 and 325 improved the stability. To illustrate the putative alterations of enzyme stability in the stabilising mutants, we characterized single mutant K325G and double mutant K91A/K325G. Both mutants showed a 5 °C change in optimal temperature compared to their wild type. Single mutant K325G rendered a longer half-life at 25 °C (T_1/2 = 21 h) while double mutant K91A/K325G retained only 40% of relative activity after 12 h incubation. The optimal pH for mutant K325G was shifted from 8 to 9 and similar substrate preference was observed for the wild type and two mutants. Our findings indicate that surface lysine mutation alters the enzymatic behaviour and, thus, rationalizes the functional effects of surface exposed lysine in conformational stability and activity of this lipase.

Thermo-alkali-stable lipase from a novel Aspergillus niger: statistical optimization, enzyme purification, immobilization and its application in biodiesel production

The influences of nutritional components affecting lipase production from the new Aspergillus niger using wheat bran as substrate were studied by employing Plackett-Burman and central composite statistical designs. Out of the 11 medium components tested, sucrose, KH₂PO₄ and MgSO₄ at final concentrations of 3.0, 1.0 and 0.5 g/L, respectively, were reported to contribute positively to enzyme production (20.09 ± 0.98 U/g ds). The enzyme was purified through ammonium sulfate precipitation followed by Sephadex G-100 gel filtration. Molecular mass of the purified lipase was 57 kDa as evident on SDS-PAGE. Different methods of immobilization were studied and the highest immobilization yield of 81.7 ± 2.18% was reported with agarose (2%) and the optimum temperature was raised from 45 to 50 °C. Immobilized lipase could retain 80% of its original activity at 60 °C after 1 hr of incubation, and was stable at pH values between neutral and alkaline pH. Lipase-catalyzed transesterification process of fungal oil resulted in a fatty acid methyl ester yield consisting of a high percentage of polyunsaturated fatty acids (83.6%), making it appropriate to be used as winter-grade biodiesel. The operational stability studies revealed that the immobilized lipase could keep 70% of its total activity after 5 cycles of the transesterification process.

Free and Substrate-Immobilised Lipases from Fusarium verticillioides P24 as a Biocatalyst for Hydrolysis and Transesterification Reactions

Fungal enzymes are widely used in technological processes and have some interesting features to be applied in a variety of biosynthetic courses. Here, free and substrate-immobilised lipases from Fusarium verticillioides P24 were obtained by solid-state fermentation using wheat bran as substrate and fungal carrier. Based on their hydrolytic and transesterification activities, the lipases were characterised as pH-dependent in both reactions, with higher substrate conversion in an alkaline environment. Thermally, the lipases performed well from 30 to 45 °C, being more stable in mild conditions. Organic solvents significantly influenced the lipase selectivity using different vegetable oils as fatty acid source. Omega(ω)-3 production in n-hexane achieved 45% using canola oil, against ≈ 18% in cyclohexane. However, ω-6 production was preferably produced for both solvents using linseed oil with significant alterations in the yield (≈ 79% and 49% for n-hexane and cyclohexane, respectively). Moreover, the greatest enzyme selectivity for ω-6 led us to suppose a lipase preference for the Sn1 position of the triacylglycerol. Lastly, a transesterification reaction was performed, achieving 90% of ester conversion in 72 h. This study reports the characterisation and use of free and substrate-immobilised lipases from Fusarium verticillioides P24 as an economic and efficient method for the first time.

Enantioselective Transesterification of Allyl Alcohols with (E)-4-Arylbut-3-en-2-ol Motif by Immobilized Lecitase™ Ultra

Lecitase™ Ultra was immobilized on four different supports and tested for the first time as the biocatalyst in the kinetic resolution of racemic allyl alcohols with the (E)-4-arylbut-3-en-2-ol system in the process of transesterification. The most effective biocatalyst turned out to be the enzyme immobilized on agarose activated with cyanogen bromide (LU-CNBr). The best results (E > 200, ees and eep = 95–99%) were obtained for (E)-4-phenylbut-3-en-2-ol and its analog with a 2,5-dimethylphenyl ring whereas the lowest ee of kinetic resolution products (90%) was achieved for the substrate with a 4-methoxyphenyl substituent. For all substrates, (R)-enantiomers were esterified faster than their (S)-antipodes. The results showed that LU-CNBr is a versatile biocatalyst, showing high activity and enantioselectivity in a wide range of organic solvents in the presence of commonly used acyl donors. High operational stability of LU-CNBr allows it to be reused in three subsequent reaction cycles without negative effects on the efficiency and enantioselectivity of transesterification. This biocatalyst can become attractive to the commercial lipases in the process of the kinetic resolution of allyl alcohols.

A Novel Fungal Lipase With Methanol Tolerance and Preference for Macaw Palm Oil

Macaw palm is a highly oil-producing plant, which presents high contents of free fatty acids, being a promising feedstock for biofuel production. The current chemical routes are costly and complex, involving highly harsh industrial conditions. Enzymatic processing is a potential alternative; however, it is hampered by the scarce knowledge on biocatalysts adapted to this acidic feedstock. This work describes a novel lipase isolated from the thermophilic fungus Rasamsonia emersonii (ReLip), which tolerates extreme conditions such as the presence of methanol, high temperatures, and acidic medium. Among the tested feedstocks, the enzyme showed the highest preference for macaw palm oil, producing a hydrolyzate with a final free fatty acid content of 92%. Crystallographic studies revealed a closed conformation of the helical amphipathic lid that typically undergoes conformational changes in a mechanism of interfacial activation. Such conformation of the lid is stabilized by a salt bridge, not observed in other structurally characterized homologs, which is likely involved in the tolerance to organic solvents. Moreover, the lack of conservation of the aromatic cluster IxxWxxxxxF in the lid of ReLip with the natural mutation of the phenylalanine by an alanine might be correlated with the preference of short acyl chains, although preserving catalytic activity on insoluble substrates. In addition, the presence of five acidic amino acids in the lid of ReLip, a rare property reported in other lipases, may have contributed to its ability to tolerate and be effective in acidic environments. Therefore, our work describes a new fungal biocatalyst capable of efficiently hydrolyzing macaw oil, an attractive feedstock for the production of "drop-in" biofuels, with high desirable feature for industrial conditions such as thermal and methanol tolerance, and optimum acidic pH. Moreover, the crystallographic structure was elucidated, providing a structural basis for the enzyme substrate preference and tolerance to organic solvents.

Transesterification in Microreactors-Overstepping Obstacles and Shifting Towards Biodiesel Production on a Microscale

Biodiesel, which was earlier used only as an alternative fuel, is now an indispensable component of commercial diesel. Conventional production processes are unable to cope with the increasing demand for biodiesel, and therefore more and more work is being done to intensify the existing processes. The intensification of the biodiesel production process, taking into account the environmental and economic factors, is based on increasing productivity. One way to achieve that is by reducing the volume of production units. The application of the enzymatic reaction path, while reducing the volume of process equipment to the micro-level, has significantly magnified the productivity of the biodiesel production process, which is primarily due to better mass transfer in microsystems. Additional breakthrough is the use of deep eutectic solvents (DES) instead of buffers for enzyme stabilization. In this study, a lipase from Thermomyces lanuginosus (TlL) (both commercial and produced by solid-state fermentation) was used as a catalyst for biodiesel production. Edible and waste sunflower oil, as well as methanol, were used as substrates. The reaction mediums were buffer and DES. The transesterification reaction was carried out in a batch reactor and the emphasis was made on different microreactor configurations. The highest yield of 32% for residence time of only τ = 30 min was obtained in the microreactor system with an emulsion of waste oil and a commercial enzyme suspended in a buffer. This indicates that enzymatic transesterification could be a valuable reaction path for dealing with waste oils. Furthermore, biodiesel synthesis in DES showed somewhat lower yields, but by increasing the water content in the system, the reaction could prove much better results. In the end, the effects of reaction conditions on the volumetric productivity of the process were analyzed.

Organic-Solvent-Tolerant Carboxylic Ester Hydrolases for Organic Synthesis

Biocatalysis has emerged as an important tool in synthetic organic chemistry enabling the chemical industry to execute reactions with high regio- or enantioselectivity and under usually mild reaction conditions while avoiding toxic waste. Target substrates and products of reactions catalyzed by carboxylic ester hydrolases are often poorly water soluble and require organic solvents, whereas enzymes are evolved by nature to be active in cells, i.e., in aqueous rather than organic solvents. Therefore, biocatalysts that withstand organic solvents are urgently needed. Current strategies to identify such enzymes rely on laborious tests carried out by incubation in different organic solvents and determination of residual activity. Here, we describe a simple assay useful for screening large libraries of carboxylic ester hydrolases for resistance and activity in water-miscible organic solvents. We have screened a set of 26 enzymes, most of them identified in this study, with four different water-miscible organic solvents. The triglyceride tributyrin was used as a substrate, and fatty acids released by enzymatic hydrolysis were detected by a pH shift indicated by the indicator dye nitrazine yellow. With this strategy, we succeeded in identifying a novel highly organic-solvent-tolerant esterase from Pseudomonas aestusnigri In addition, the newly identified enzymes were tested with sterically demanding substrates, which are common in pharmaceutical intermediates, and two enzymes from Alcanivorax borkumensis were identified which outcompeted the gold standard ester hydrolase CalB from Candida antarcticaIMPORTANCE Major challenges hampering biotechnological applications of esterases include the requirement to accept nonnatural and chemically demanding substrates and the tolerance of the enzymes toward organic solvents which are often required to solubilize such substrates. We describe here a high-throughput screening strategy to identify novel organic-solvent-tolerant carboxylic ester hydrolases (CEs). Among these enzymes, CEs active against water-insoluble bulky substrates were identified. Our results thus contribute to fostering the identification and biotechnological application of CEs.

Novel and Efficient Synthesis of Phenethyl Formate via Enzymatic Esterification of Formic Acid

Current methods for the production of esters, including chemical synthesis and extraction from natural sources, are hindered by low yields and environmental pollution. The enzymatic synthesis of these compounds could help overcome these problems. In this study, phenethyl formate, a commercially valuable formate ester, was synthesized using commercial immobilized lipases. The effects of specific enzymes, enzyme concentration, formic acid:phenethyl alcohol molar ratio, temperature, and solvent were studied in order to optimize the synthesis conditions, which were identified as 15 g/L of Novozym 435 enzyme, a 1:5 formic acid:phenethyl alcohol molar ratio, a 40 °C reaction temperature, and 1,2-dichloroethane as the solvent. Under these conditions, phenethyl formate was obtained in a conversion yield of 95.92%. In addition, when 1,2-dichloroethane was replaced with toluene as the solvent, the enzyme could be recycled for at least 20 reactions with a steady conversion yield above 92%, testifying to the economic aspects of the process. The enzymatic synthesis of phenethyl formate using the proposed method is more environmentally friendly than methods currently employed in academic and laboratory settings. Moreover, the method has the potential to enhance the value-added properties of formic acid owing to its downstream use in the production of commercially essential esters.

Lipase Catalyzed Acidolysis for Efficient Synthesis of Phospholipids Enriched with Isomerically Pure cis-9,trans-11 and trans-10,cis-12 Conjugated Linoleic Acid

The production of phospholipid (PL) conjugates with biologically active compounds is nowadays an extensively employed approach. This type of phospholipids conjugates could improve bioavailability of many poorly absorbed active compounds such as isomers of conjugated linoleic acid (CLA), which exhibit versatile biological effects. The studies were carried out to elaborate an efficient enzymatic method for the synthesis of phospholipids with pure (>90%) cis-9,trans-11 and trans-10,cis-12 CLA isomers. For this purpose, three commercially available immobilized lipases were examined in respect to specificity towards CLA isomers in acidolysis of egg-yolk phosphatidylcholine (PC). Different incorporation rates were observed for the individual CLA isomers. Under optimal conditions: PC/CLA molar ratio 1:6; Rhizomucor miehei lipase loading 24% wt. based on substrates; heptane; DMF, 5% (v/v); water activity (aw), 0.11; 45 °C; magnetic stirring, 300 rpm; 48 h., effective incorporation (EINC) of CLA isomers into PC reached ca. 50%. The EINC of CLA isomers was elevated for 25–30% only by adding a water mimic (DMF) and reducing aw to 0.11 comparing to the reaction system performed at aw = 0.23. The developed method of phosphatidylcholine acidolysis is the first described in the literature dealing with isometrically pure CLA and allow to obtain very high effective incorporation.

The Effect of Dimethyl Sulfoxide on the Lysozyme Unfolding Kinetics, Thermodynamics, and Mechanism

The thermal stability of proteins in the presence of organic solvents and the search for ways to increase this stability are important topics in industrial biocatalysis and protein engineering. The denaturation of hen egg-white lysozyme in mixtures of water with dimethyl sulfoxide (DMSO) with a broad range of compositions was studied using a combination of differential scanning calorimetry (DSC), circular dichroism (CD), and spectrofluorimetry techniques. In this study, for the first time, the kinetics of unfolding of lysozyme in DMSO–water mixtures was characterized. In the presence of DMSO, a sharp decrease in near-UV CD and an increase in the fluorescence signal were observed at lower temperatures than the DSC denaturation peak. It was found that differences in the temperatures of the CD and DSC signal changes increase as the content of DMSO increases. Changes in CD and fluorescence are triggered by a break of the tertiary contacts, leading to an intermediate state, while the DSC peak corresponds to a subsequent complete loss of the native structure. In this way, the commonly used two-state model was proven to be unsuitable to describe the unfolding of lysozyme in the presence of DMSO. In kinetic studies, it was found that even high concentrations of DMSO do not drastically change the activation energy of the initial stage of unfolding associated with a disruption of the tertiary structure, while the enthalpy of denaturation shows a significant dependence on DMSO content. This observation suggests that the structure of the transition state upon unfolding remains similar to the structure of the native state.

Lipase Production by Solid-State Cultivation of Thermomyces Lanuginosus on By-Products from Cold-Pressing Oil Production

This study shows that by-products obtained after cold-pressing oil production (flex oil cake, hemp oil cake, hull-less pumpkin oil cake) could be used as substrates for the sustainable and cost-effective production of lipase when cultivating Thermomyces lanuginosus under solid-state conditions (T = 45 °C, t = 9 days). Lipase showed optimum activity at T = 40 °C. The produced lipase extract was purified 17.03-folds with a recovery of 1% after gel chromatography. Three different batch experiments were performed in order to test the possibility of using the lipase in biodiesel production. Experiments were performed with a commercial, unpurified enzyme, and partially purified lipase with sunflower oil and methanol as substrates in a batch reactor at 40 °C. During the experiments, the operational stability of the enzyme was studied. The obtained results clearly showed that produced crude and purified lipase can be used for biodiesel production, but the process needs some additional optimization. As for operation stability, it was noticed that the commercial enzyme was deactivated after 30 h, while produced crude enzyme remained 8.25% of its activity after 368 h.

Enhancement of laccase activity by pre-incubation with organic solvents

Laccases that are tolerant to organic solvents are powerful bio-catalysts with broad applications in biotechnology. Most of these uses must be accomplished at high concentration of organic solvents, during which proteins undergo unfolding, thereby losing enzyme activity. Here we show that organic-solvent pre-incubation provides effective and reversible 1.5- to 4.0-fold enhancement of enzyme activity of fungal laccases. Several organic solvents, including acetone, methanol, ethanol, DMSO, and DMF had an enhancement effect among all laccases studied. The enhancement was not substrate-specific and could be observed by using both phenolic and non-phenolic substrates. Laccase preincubated with organic solvents was sensitive to high temperature but remained stable at 25 °C, for an advantage for long-term storage. The acetone-pre-incubated 3-D structure of DLac, a high-efficiency fungal laccase, was determined and confirmed that the DLac protein structure remains intact and stable at a high concentration of organic solvent. Moreover, the turnover rates of fungal laccases were improved after organic-solvent pre-incubation, with DLac showing the highest enhancement among the fungal laccases examined. Our investigation sheds light on improving fungal laccase usage under extreme conditions and extends opportunities for bioremediation, decolorization, and organic synthesis.

Efficient resolution of 3-aryloxy-1,2-propanediols using CLEA-YCJ01 with high enantioselectivity

The lipase YCJ01 from Burkholderia ambifaria is an organic solvent-stable enzyme and its activity can be activated by a hydrophobic solvent due to the "interface activation" mechanism. The activity of lipase YCJ01 increased by 2.1-fold with t-butanol as the precipitant even after cross-linking. The cross-linked enzyme aggregates of lipase YCJ01 (CLEAs-YCJ01) were found to be efficient for resolving 3-(4-methylphenoxy)-1,2-propanediol (MPPD) through sequential esterification. Excellent enantioselectivity towards MPPD (E > 400), excellent enantiomeric excess (ee) values of 99.2% for S-diacetates and 99.1% for R-monoacetate, and high yield (49.9%) were achieved using a high substrate concentration (180 mmol L-1). Thus, R- and S-type compounds with excellent ee values were simultaneously obtained, and MPPD was resolved by CLEAs-YCJ01. CLEAs-YCJ01 also showed high operational stability and maintained 91.2% residual activity after ten batches. To further evaluate the substrate specificity of CLEAs-YCJ01, a series of 3-aryloxy-1,2-propanediols (six analogues of MPPD) was applied as substrates for resolution. Under the optimized reaction conditions of reaction temperature of 35 °C, MPPD concentration of 180 mmol L-1, molar ratio of vinyl acetate to MPPD of 3 : 1, and isopropyl ether as the solvent, CLEAs-YCJ01 exhibited relatively strict enantioselectivity towards all the analogues of MPPD with a high yield (≥49.3%), favourable ee values (94.8-99.4%) for S-diacetates, and high ee values (92.1-99.2%) for R-monoacetate, which shows potential prospects for industrial applications.