Polydopamine-Capped Bimetallic AuPt Hydrogels Enable Robust Biosensor for Organophosphorus Pesticide Detection

A Review on Recent Trends and Future Developments in Electrochemical Sensing

Electrochemical methods and devices have ignited prodigious interest for sensing and monitoring. The greatest challenge for science is far from meeting the expectations of consumers. Electrodes made of two-dimensional (2D) materials such as graphene, metal-organic frameworks, MXene, and transition metal dichalcogenides as well as alternative electrochemical sensing methods offer potential to improve selectivity, sensitivity, detection limit, and response time. Moreover, these advancements have accelerated the development of wearable and point-of-care electrochemical sensors, opening new possibilities and pathways for their applications. This Review presents a critical discussion of the recent developments and trends in electrochemical sensing.

Trends on Aerogel-Based Biosensors for Medical Applications: An Overview

Aerogels are unique solid-state materials composed of interconnected 3D solid networks and a large number of air-filled pores. This structure leads to extended structural characteristics as well as physicochemical properties of the nanoscale building blocks to macroscale, and integrated typical features of aerogels, such as high porosity, large surface area, and low density, with specific properties of the various constituents. Due to their combination of excellent properties, aerogels attract much interest in various applications, ranging from medicine to construction. In recent decades, their potential was exploited in many aerogels' materials, either organic, inorganic or hybrid. Considerable research efforts in recent years have been devoted to the development of aerogel-based biosensors and encouraging accomplishments have been achieved. In this work, recent (2018-2023) and ground-breaking advances in the preparation, classification, and physicochemical properties of aerogels and their sensing applications are presented. Different types of biosensors in which aerogels play a fundamental role are being explored and are collected in this manuscript. Moreover, the current challenges and some perspectives for the development of high-performance aerogel-based biosensors are summarized.

Comprehensive Insights and Advancements in Gel Catalysts for Electrochemical Energy Conversion

Continuous worldwide demands for more clean energy urge researchers and engineers to seek various energy applications, including electrocatalytic processes. Traditional energy-active materials, when combined with conducting materials and non-active polymeric materials, inadvertently leading to reduced interaction between their active and conducting components. This results in a drop in active catalytic sites, sluggish kinetics, and compromised mass and electronic transport properties. Furthermore, interaction between these materials could increase degradation products, impeding the efficiency of the catalytic process. Gels appears to be promising candidates to solve these challenges due to their larger specific surface area, three-dimensional hierarchical accommodative porous frameworks for active particles, self-catalytic properties, tunable electronic and electrochemical properties, as well as their inherent stability and cost-effectiveness. This review delves into the strategic design of catalytic gel materials, focusing on their potential in advanced energy conversion and storage technologies. Specific attention is given to catalytic gel material design strategies, exploring fundamental catalytic approaches for energy conversion processes such as the CO2 reduction reaction (CO2RR), oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and more. This comprehensive review not only addresses current developments but also outlines future research strategies and challenges in the field. Moreover, it provides guidance on overcoming these challenges, ensuring a holistic understanding of catalytic gel materials and their role in advancing energy conversion and storage technologies.

Recent Studies and Applications of Hydrogel-Based Biosensors in Food Safety

Food safety has increasingly become a human health issue that concerns all countries in the world. Some substances in food that can pose a significant threat to human health include, but are not limited to, pesticides, biotoxins, antibiotics, pathogenic bacteria, food quality indicators, heavy metals, and illegal additives. The traditional methods of food contaminant detection have practical limitations or analytical defects, restricting their on-site application. Hydrogels with the merits of a large surface area, highly porous structure, good shape-adaptability, excellent biocompatibility, and mechanical stability have been widely studied in the field of food safety sensing. The classification, response mechanism, and recent application of hydrogel-based biosensors in food safety are reviewed in this paper. Furthermore, the challenges and future trends of hydrogel biosensors are also discussed.

Nanomaterials-based biosensor and their applications: A review

A sensor can be called ideal or perfect if it is enriched with certain characteristics viz., superior detections range, high sensitivity, selectivity, resolution, reproducibility, repeatability, and response time with good flow. Recently, biosensors made of nanoparticles (NPs) have gained very high popularity due to their excellent applications in nearly all the fields of science and technology. The use of NPs in the biosensor is usually done to fill the gap between the converter and the bioreceptor, which is at the nanoscale. Simultaneously the uses of NPs and electrochemical techniques have led to the emergence of biosensors with high sensitivity and decomposition power. This review summarizes the development of biosensors made of NPssuch as noble metal NPs and metal oxide NPs, nanowires (NWs), nanorods (NRs), carbon nanotubes (CNTs), quantum dots (QDs), and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

A visualized sensor based on layered double hydroxides with peroxidase-like activity for sensitive acetylcholinesterase assay

Acetylcholinesterase (AChE) plays a crucial role in biological neurotransmission. The aberrant expression of AChE is associated with various neurodegenerative diseases. Therefore, it is of great significance to develop a simple and highly sensitive AChE analysis platform. Herein, a simple colorimetric sensor was constructed for sensitive detection of AChE based on the peroxidase-like catalytic activity of Ni/Co layered double hydroxides (Ni/Co LDHs). In this sensor, the fabricated Ni/Co LDHs possess high peroxidase-like activity, enabling rapid catalysis of o-phenylenediamine (OPD) to produce yellow oxOPD in the presence of H₂O₂. This peroxidase-like activity of Ni/Co LDHs was found to be effectively inhibited by the presence of AChE. It is speculated that the combination of AChE on the outer surface of Ni/Co LDHs through non-covalent interaction may cover the active sites and hinder their adsorption to the substrates, leading to the failure of OPD oxidation. As a result, the yellow color from oxOPD is related to the AChE concentration, enabling the direct AChE assay in an equipment-free manner. In addition, the fabricated Ni/Co LDHs could be modified on a paper surface to obtain a paper-based analytical device for visualized colorimetric detection of AChE. The as-proposed sensor shows high sensitivity to AChE with a detection limit down to 6.6 μU mL^-1. Therefore, this naked-eye paper-based sensor is capable of on-site and real-time detection of AChE, and has outstanding application prospects in clinical diagnosis and biomedical fields.

Visual evaluation of acetylcholinesterase inhibition by an easy-to-operate assay based on N-doped carbon nanozyme with high stability and oxidase-like activity

Acetylcholinesterase (AChE) is the key enzyme associated with neurotransmission, and thus many drugs have been explored for their inhibitory effect on AChE, such as donepezil for Alzheimer's disease and organophosphorus pesticides (OPs). Compared with clinical trials, in vitro screening bioassays for AChE inhibitors are preferable in terms of operability and cost. Herein, we developed an easy-to-operate nanozyme-based colorimetric assay for the evaluation of AChE inhibitory strength with excellent anti-interference ability and low dependence on professional equipment. The metal-free carbon nanozyme NC900 played an important role in the signal output due to its features of efficient oxidase-like activity, excellent water dispersibility, high stability and low color interference. Employing various AChE-targeted or non-targeted pesticides as examples, the as-proposed assay exhibited excellent distinguishing ability for different chemicals. The higher absorption intensity at 652 nm represents a stronger inhibitory effect, as well as blue color. In addition, this method was used to study the influence of pH on the degradation of prodrugs, and the efficiency of mixed pesticides. This work provides a simple and reliable assay to screen AChE inhibitors, which is promising for the preliminary evaluation of a large number of potential candidates.

Carbon Dot-Doped Hydrogel Sensor Array for Multiplexed Colorimetric Detection of Wound Healing

Effective wound care and treatment require a quick and comprehensive assessment of healing status. Here, we develop a carbon dot-doped hydrogel sensor array in polydimethylsiloxane (PDMS) for simultaneous colorimetric detections of five wound biomarkers and/or wound condition indicators (pH, glucose, urea, uric acid, and total protein), leading to the holistic assessment of inflammation and infection. A biogenic carbon dot synthesized using an amino acid and a polymer precursor is doped in an agarose hydrogel matrix for constructing enzymatic sensors (glucose, urea, and uric acid) and dye-based sensors (pH and total protein). The encapsulated enzymes in such a matrix exhibit improved enzyme kinetics and stability compared to those in pure hydrogels. Such a matrix also provides stable colorimetric responses for all five sensors. The sensor array exhibits high accuracy (recovery rates of 91.5-113.1%) and clinically relevant detection ranges for all five wound markers. The sensor array is established for simulated wound fluids and validated with rat wound fluids from perturbed wound models. Distinct color patterns are obtained that can clearly distinguish healing vs nonhealing wounds visually and quantitatively. This hydrogel sensor array shows great potential for on-site wound sensing due to its long-term stability, lightweight, and flexibility.

Controllable Preparation of 2D V2 O5 Peroxidase-Mimetic Nanozyme to Develop Portable Paper-Based Analytical Device for Intelligent Pesticide Assay

Given severe harmfulness of pesticides, unique characteristics of peroxidase-mimetic nanozymes, and favorable prospects of paper-based analytical devices (PADs), it is highly desirable to construct a nanozyme-based PAD for intelligent analysis of pesticide without enzyme/aptamer/antibody and interference of O₂ . Herein, 2D nanosheet-like V₂ O₅ (2D-VONz) with exclusive peroxidase-mimetic activity is controllably prepared under the optimal reactants concentration and reaction temperature. Experimental characterizations demonstrate that 2D-VONz exhibits high affinity and catalytic rate, and catalytic oxidation is dependent on •OH yielded from the decomposition of H₂ O₂ catalyzed by 2D-VONz, and the catalytic performance is relevant to π-π stacking force-controlled surface zeta potential of 2D-VONz changed by substrates, giving a comprehensive understand of the inherent mechanism. Interestingly, 2D-VONz activity is inhibited by pesticide glyphosate (Gly), and then is exploited to develop a PAD, on which, Gly declines 2D-VONz activity to prevent it from catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine, contributing to rapid, naked-eye, and portable analysis of pesticide using a smartphone. The current strategy on preparing exclusive peroxidase-mimetic 2D nanozyme, investigating catalytic mechanism, developing nanozyme-based PAD, and achieving direct pesticide sensing will set up new avenues to improve the analytical performance, strengthen the practicability, and broaden the application scope of nanozymes.

Dual Structural Design of Platinum-Nickel Hydrogels for Wearable Glucose Biosensing with Ultrahigh Stability

Wearable glucose sensors are of great significance and highly required in mobile health monitoring and management but suffering from limited long-term stability and wearable adaptability. Here a simultaneous component and structure engineering strategy is presented, which involves Pt with abundant Ni to achieve three-dimensional, dual-structural Pt-Ni hydrogels with interconnected networks of PtNi nanowires and Ni(OH)₂ nanosheets, showing prominent electrocatalytic activity and stability in glucose oxidation under neutral condition. Specifically, the PtNi_(1:3) dual hydrogels shows 2.0 and 270.6 times' activity in the glucose electro-oxidation as much as the pure Pt and Ni hydrogels. Thanks to the high activity, structural stability, good flexibility, and self-healing property, the PtNi_(1:3) dual gel-based non-enzymatic glucose sensing chip is endowed with high performance. It features a high sensitivity, an excellent selectivity and flexibility, and particularly an outstanding long-term stability over 2 months. Together with a pH sensor and a wireless circuit, an accurate, real-time, and remote monitoring of sweat glucose is achieved. This facile design of novel dual-structural metallic hydrogels sheds light to rationally develop new functional materials for high-performance wearable biosensors.

Element Distributions in Bimetallic Aerogels

ConspectusMetal aerogels assembled from nanoparticles have captured grand attention because they combine the virtues of metals and aerogels and are regarded as ideal materials to address current environmental and energy issues. Among these aerogels, those composed of two metals not only display combinations (superpositions) of the properties of their individual metal components but also feature novel properties distinctly different from those of their monometallic relatives. Therefore, quite some effort has been invested in refining the synthetic methods, compositions, and structures of such bimetallic aerogels as to boost their performance for the envisaged application(s). One such use would be in the field of electrocatalysis, whereby it is also of utmost interest to unravel the element distributions of the (multi)metallic catalysts to achieve a ratio of their bottom-to-up design. Regarding the element distributions in bimetallic aerogels, advanced characterization techniques have identified alloys, core-shells, and structures in which the two metal particles are segregated (i.e., adjacent but without alloy or core-shell structure formation). While an almost infinite number of metal combinations to form bimetallic aerogels can be envisaged, the knowledge of their formation mechanisms and the corresponding element distributions is still in its infancy. The evolution of the observed musters is all but well understood, not to mention the positional changes of the elements observed in operando or in beginning- vs end-of-life comparisons (e.g., in fuel cell applications).With this motivation, in this Account we summarize the endeavors made in element distribution monitoring in bimetallic aerogels in terms of synthetic methods, expected structures, and their evolution during electrocatalysis. After an introductory chapter, we first describe briefly the two most important characterization techniques used for this, namely, scanning transmission electron microscopy (STEM) combined with element mapping (e.g., energy-dispersive X-ray spectroscopy (EDXS)) and X-ray absorption spectroscopy (XAS). We then explain the universal methods used to prepare bimetallic aerogels with different compositions. Those are divided into one-step methods in which gels formed from mixtures of the respective metal salts are coreduced and two-step approaches in which monometallic nanoparticles are mixed and gelated. Subsequently, we summarize the current state-of-knowledge on the element distributions unraveled using diverse characterization methods. This is extended to investigations of the element distributions being altered during electrochemical cycling or other loads. So far, a theoretical understanding of these processes is sparse, not to mention predictions of element distributions. The Account concludes with a series of remarks on current challenges in the field and an outlook on the gains that the field would earn from a solid understanding of the underlying processes and a predictive theoretical backing.

A Novel Electrochemical Biosensor Based on Polyaniline-Embedded Copper Oxide Nanoparticles for High-Sensitive Paraoxon-Ethyl (PE) Detection

This paper proposes a fabrication of a hyper-sensitive amperometric biosensor for paraoxon-ethyl (PE) detection. In this developed biosensor, polyaniline (PANI) and copper oxide (CuO)-based nanocomposite is used as a sensing platform. The homogeneous distribution of CuO onto the PANI matrix enhances the surface area and conductivity of the nanocomposite. Additionally, the PANI produces a compatible environment for enzyme immobilization, which further enhances the rate of electron transfer. For biosensor fabrication, the nanocomposite is deposited electrophoretically onto the ITO glass substrate and immobilization of acetylcholinesterase (AChE) enzyme is conducted onto the fabricated electrode surface. The results validate good reproducibility, good stability, and high selectivity of the fabricated biosensor (AChE/PANI@CuO/ITO). The inhibition rate of paraoxon-ethyl (PE) is recorded in the concentration range of 1-200 nM with a low limit of detection of 0.096 nM or 96 pM. The sensitivity of the developed biosensor is found to be 49.86 µA(nM)^-1. The developed biosensor is further successfully accomplished for the detection of PE in real samples like rice and pulse.

Pd Metallene Aerogels with Single-Atom W Doping for Selective Ethanol Oxidation

The development of advanced electrocatalysts with satisfactory C1 pathway selectivity for the ethanol oxidation reaction (EOR) is critical. Herein, a bubbling CO-induced gelation method is developed in acetic acid at 50 °C to construct single-atom W-doped Pd metallene aerogels (denoted as SA W-Pd MAs) within 1 h. In light of the metallene structural advantages of noble metal aerogels and single-atom W decoration, the resultant SA W-Pd MAs exhibit an outstanding EOR performance with high C1 pathway selectivity. Density functional theory calculations validate that the SA W-Pd MAs greatly improve the formation of the CH₃O intermediate and the transformation of poisonous CO species to CO₂, thus resulting in high C1 pathway selectivity. Therefore, this work not only offers an effective gelation method to fabricate noble metal aerogels with atomic-scale building blocks but also presents guidance to develop high-efficiency EOR electrocatalysts.

2D Conductive Covalent Organic Frameworks with Abundant Carbonyl Groups for Electrochemical Sensing

Due to their permanent porosity, robust chemical stability, and tunable structure, covalent organic frameworks (COFs) are very attractive in the application of energy storage, catalysis, sorption, and sensing. However, the very low conductivity of COFs severely restricts their application in electrochemical sensing. Here, an aza-fused π-conjugated COFs with abundant carbonyl groups (COF1) was synthesized and deployed as electrode materials in electrochemical sensing for the first time. The current response of the acetylcholinesterase biosensor based on COF1 increases three times when compared to the electrode without COF1. The effects of carbonyl groups on signal enhancement were proved in depth by a series of characterization and comparison experiments with the prepared COF2 without carbonyl groups. The results demonstrated that exposed carbonyl active sites of COF1 can promote the effective immobilization and bioactivity preserving of enzyme molecules and contribute to the enrichment of analytes. Together with the good conductivity of COF1 derived from a fully extended 2D aromatized π-conjugated system, all of which improve the biosensor performance. The COF1-based biosensor exhibited fast response speed, high sensitivity, good selectivity and practicability, and robust stability for organophosphorus pesticide detection and proved to be a promising tool for the rapid and onsite detection of organophosphorus pesticides in the environment.

Recent Advances in Rapid Detection Techniques for Pesticide Residue: A Review

As an important chemical pollutant affecting the safety of agricultural products, the on-site and efficient detection of pesticide residues has become a global trend and hotspot in research. These methodologies were developed for simplicity, high sensitivity, and multiresidue detection. This review introduces the currently available technologies based on electrochemistry, optical analysis, biotechnology, and some innovative and novel technologies for the rapid detection of pesticide residues, focusing on the characteristics, research status, and application of the most innovative and novel technologies in the past 10 years, and analyzes challenges and future development prospects. The current review could be a good reference for researchers to choose the appropriate research direction in pesticide residue detection.

Nanobiocatalysis: a materials science road to biocatalysis

With high activity and specificity to conduct catalysis under mild conditions, enzymes show great promise in many fields. However, they are not acclimatized to environments in practice after leaving the familiar biological conditions. Aiming at this issue, nanobiocatalysis, a fresh area integrating nanotechnology and enzymatic catalysis, is expected to design biocatalysis based on materials science. Specifically, nano-integrated biocatalysis and bio-inspired nanocatalysis are considered as two effective nanobiocatalytic systems to meet different design needs. Notably, both systems are not entirely separated, and the combination of both further sparks more possibilities. This review summarizes the type, construction, and function of nanobiocatalytic systems, analyzing the pros and cons of different strategies. Moreover, the corresponding applications in bioassay, biotherapy, and environmental remediation are highlighted. We hope that the advent of nanobiocatalysis will help in grasping the inherence of biocatalysis and propel biocatalytic applications.

Ultra-Low Content Bismuth-Anchored Gold Aerogels with Plasmon Property for Enhanced Nonenzymatic Electrochemical Glucose Sensing

Effective glucose surveillance provides a strong guarantee for the high-quality development of human health. Au nanomaterials possess compelling applications in nonenzymatic electrochemical glucose biosensors owing to superior catalytic performances and intriguing biocompatibility properties. However, it has been a grand challenge to accurately control the architecture and composition of Au nanomaterials to optimize their optical, electronic, and magnetic properties for further improving the performance of electrocatalytic sensing. Herein, ultra-low content Bi-anchored Au aerogels are synthesized via a one-step reduction strategy. Benefiting from the unique structure of aerogels as well as the synergistic effect between Au and Bi, the optimized Au₂₀₀Bi aerogels greatly boost the activity of glucose oxidation compared with Au aerogels. Under plasmon resonance excitation, bimetallic Au₂₀₀Bi aerogels with wider photics-dependent properties further show plasmon-promoted glucose electro-oxidation activity, which is derived from the photothermal and photoelectric effects caused by the local surface plasmon resonance. Thanks to the enhanced performance, a nonenzymatic electrochemical glucose biosensor is constructed to detect glucose with high sensitivity. This plasmon-promoted electrocatalytic activity through the synergetic strategy of bimetallic aerogels has potential applications in various research fields.

An efficient multi-enzyme cascade platform based on mesoporous metal-organic frameworks for the detection of organophosphorus and glucose

An efficient colorimetric detection platform based on multi-enzyme cascade has been developed for detection of organophosphorus. Firstly, the dual-enzyme platform was prepared and applied for sensitive glucose detection (detection limit 0.32 μM). And then three enzymes, including acetylcholinesterase, horseradish peroxidase and choline oxidase were encapsulated in cruciate flower-like zeolitic imidazolate framework-8 (CF-ZIF-8) through one-step co-precipitation to construct detection platform with acetylcholine chloride as substrate. The acephate inhibited the activity of acetylcholinesterase, obstructed the cascade reaction and reduced the production of H₂O₂, resulting in the changes of color intensity for the colorimetric detection. With suitable size and porous structure, CF-ZIF-8 provided a good microenvironment for guaranteeing the activity and spatial proximity of enzymes. The multi-enzyme platform displayed great performances with the detection limit of 0.23 nM for acephate. It was applied to the detection of acephate in Chinese cabbage and romaine, verifying the practicability of this platform.

Amorphous metal-organic frameworks on PtCu hydrogels: Enzyme immobilization platform with boosted activity and stability for sensitive biosensing

Cell-free enzymatic catalysis (CFEC) is emerging biotechnology that simulates biological transformations without living cells. However, the high cost of separation and preparation of the enzyme has hindered the practical application of the CFEC. Enzyme immobilization technologies using solid supports to stabilize enzymes have been regarded as an efficient strategy to address this issue. Nevertheless, the activity and stability of the immobilized enzymes are still crucial challenges for working in vitro. Herein, an enzyme immobilization platform is developed by using PtCu hydrogels coated with amorphous metallic-organic frameworks (MOFs) as multifunctional carriers to encapsulate horseradish peroxidase (HRP). Specifically, PtCu hydrogels acting as a "reservoir of metal ions" can interact with the immobilized enzyme and facilitate electron transfer, leading to the boosted enzyme catalytic performances. Furthermore, amorphous MOFs on the surface of PtCu hydrogels serve as an "armor" to protect the internal enzymes from various perturbation environments. The resultant enzyme immobilization platform (PtCu@HRP@ZIF-8) not only shows an approximately 2.4-fold enhanced activity compared with free enzyme but also exhibits improved stability against harsh conditions. The PtCu@HRP@ZIF-8-based biosensor is constructed for sensitive sensing of organophosphorus pesticides (OPs). The proposed biosensor exhibits a favorable linear relationship with the concentration of paraoxon-ethyl from 6 to 800 ng/mL, with a low detection limit of 1.8 ng/mL. This work reveals the promising potential of our proposed enzyme immobilization platform in practical applications.

Progress in Nanomaterials-Based Enzyme and Aptamer Biosensor for the Detection of Organophosphorus Pesticides

With the improvement of people's safety awareness, the requirement of pesticide detection is gradually increasing, and many new detection methods toward Organophosphorus pesticide (OPs) has been further developed and applied. Nanomaterials-based biosensors have played an important role in the trace detection of OPs. This article mainly introduces the detection principle of enzymes and aptamers as the identification element of biosensors. Various nanomaterials (i.e., metals and metal oxides, carbon nanotubes, graphene and graphene oxide, quantum dots, metal organic frameworks, molecular imprinted polymers, etc.) possess their unique properties and play different roles in the enzyme and aptamer-based biosensors toward OPs: (a) to produce the optical or electrochemical signal; (b) as a carrier to load the enzyme or aptamer; (c) to enhance the signal response. Besides, the intelligent portable devices provide the possibility to realize the onsite and real-time detection. The limitations of some nanomaterials and the future development are discussed. Finally, the future of enzyme and aptamer-based biosensors has prospected.

Ultrasmall Gold Nanoclusters-Enabled Fabrication of Ultrafine Gold Aerogels as Novel Self-Supported Nanozymes

Metal aerogels represent an emerging type of functional porous materials with promising applications in diverse fields, but the fabrication of metal aerogels with specific structure and property still remains a challenge. Here, the authors report a new approach to fabricate metal aerogels by using ultrasmall metal nanoclusters (NCs) as functional building blocks. By taking D-penicillamine-stabilized gold NCs (AuNCs) with a diameter of 1.4 nm as an example, Au aerogels with ultrafine ligament size (3.5 nm) and good enzyme-mimic properties are synthesized. Detailed characterization shows that the obtained Au aerogels possess typical 3D self-supported porous network structure with high gold purity and surface area. Time-lapse spectroscopic and microscopic monitoring of the gelation process reveal that these ultrasmall AuNCs first grow into large nanoparticles before fusion into nanowire networks, during which both pH and the precursor concentration are identified to be the determining factor. Owing to their highly porous structure and abundant metal nodes, these self-supported Au aerogels display excellent peroxidase-like properties. This work provides a strategy for fabricating advanced metal aerogels by taking ultrasmall-sized metal NCs as building blocks, which also opens new avenues for engineering the structure and properties of metal aerogels for further advancing their applications.

Rolling Circle Amplification-based Copper Nanoparticle Synthesis on Cyclic Olefin Copolymer Substrate and Its Application in Aptasensor

This study aimed to develop a label-free fluorescent aptasensor for the detection of diazinon (DZN) on a cyclic olefin copolymer (COC) substrate. The aptasensor design was based on rolling circle amplification (RCA) technology and the use of self-assembled copper nanoparticles (CuNPs). A dual-function (DF) probe, capable of binding to circular DNA and an aptamer, was designed and immobilized on a COC-bottom 96-well plate. An aptamer was used for selective recognition of DZN, and the specific site of the aptamer that strongly reacted with DZN was successfully identified using circular dichroism (CD) analysis. In presence of DZN, the aptamer and DZN formed a strong complex, thus providing an opportunity for hybridization of the DF probe and circular DNA, thereby initiating an RCA reaction. Repetitive poly thymine (T) sequence with a length of 30-mer, generated in the RCA reaction, served as a template for the synthesis of fluorescent copper nanoparticles, emitting an orange fluorescence signal (at approximately 620 nm) proportional to the amount of RCA product, within 10 min under UV irradiation. The CuNP fluorescence was imaged and quantified using an image analysis software. A linear correlation of the fluorescence signal was confirmed in the DZN concentration range of 0.1–3 ppm, with a detection limit of 0.15 ppm. Adoption of a label-free detection method, utilizing RCA and fluorescent CuNPs on COC substrates, reduced the need for complex equipment and requirements for DZN analysis, thereby representing a simple and rapid sensing method circumventing the limitations of current complex and labor-intensive methods.

Interstitial boron-triggered electron-deficient Os aerogels for enhanced pH-universal hydrogen evolution

Developing high-performance electrocatalysts for hydrogen evolution reaction (HER) is crucial for sustainable hydrogen production, yet still challenging. Here, we report boron-modulated osmium (B-Os) aerogels with rich defects and ultra-fine diameter as a pH-universal HER electrocatalyst. The catalyst shows the small overpotentials of 12, 19, and 33 mV at a current density of 10 mA cm⁻² in acidic, alkaline, and neutral electrolytes, respectively, as well as excellent stability, surpassing commercial Pt/C. Operando X-ray absorption spectroscopy shows that interventional interstitial B atoms can optimize the electron structure of B-Os aerogels and stabilize Os as active sites in an electron-deficient state under realistic working conditions, and simultaneously reveals the HER catalytic mechanisms of B-Os aerogels in pH-universal electrolytes. The density functional theory calculations also indicate introducing B atoms can tailor the electronic structure of Os, resulting in the reduced water dissociation energy and the improved adsorption/desorption behavior of hydrogen, which synergistically accelerate HER.

While noble metals can be active electrocatalysts for producing renewable H₂, there are relatively few works examining osmium materials. Here, the authors prepare boron-doped osmium aerogels for H₂ evolution electrocatalysis plus examine the mechanism using computational and in situ characterization.

Ultrathin graphdiyne nanosheets confining Cu quantum dots as robust electrocatalyst for biosensing featuring remarkably enhanced activity and stability

There is an urgent need for developing electrochemical biosensor based on the acetylcholinesterase (AChE) inhibition to real-time analysis of organophosphorus pesticides (OPs), but it is suffered from the sluggish electrode kinetics and high oxidation potential toward signal species. Herein, a nanocomposite of ultrafine Cu quantum dots (QD) uniformly loaded on three-dimensional ultrathin graphdiyne (GDY) nanosheets (denoted as Cu@GDY) was synthesized via a one-step strategy, which showing high-density of active sites with persistent stability. Then an AChE biosensor based on Cu@GDY was fabricated to detect OPs, and the results revealed that the Cu@GDY nanocomposite can significantly amplifies electrochemical signal and reduces the oxidation potential for OPs. The strong interaction between active site of Cu@GDY and thiocholine signal species caused rapid analyte aggregation and decreased the reaction activation energy of thiocholine electro-oxidation. Benefiting from the excellent catalytic activity of Cu@GDY nanocomposite and reasonable regulation of enzyme inhibition kinetics, the biosensor achieved rapid and sensitive detection of OPs with a detection limit of 1 μg L^-1 for paraoxon. Furthermore, the biosensor demonstrated great reproducibility, good stability and high recovery rate for OPs detection in real samples. Cu@GDY based sensor also displayed high catalytic activities and good selectivity to the non-enzymatic detection of glucose in alkaline medium. Cu@GDY offers a versatile and promising platform for sensors and biosensors featuring remarkably enhanced activity and stability, and can be applied to many other fields as desirable electrocatalyst.

Dual-mode fluorescence and colorimetric detection of pesticides realized by integrating stimulus-responsive luminescence with oxidase-mimetic activity into cerium-based coordination polymer nanoparticles

The great threat of pesticide residues to the environment and human health has drawn widespread interest to explore approaches for pesticide monitoring. Compared to commonly developed single-signal pesticide assays, multi-mode detection with inherent self-validation and self-correction is expected to offer more reliable and anti-interference results. However, how to realize multi-mode analysis of pesticides still remains challenging. Herein, we propose a dual-mode fluorescence and colorimetric method for pesticide determination by integrating stimulus-responsive luminescence with oxidase-mimetic activity into cerium-based coordination polymer nanoparticles (CPNs(Ⅳ)). The CPNs(Ⅳ) exhibit good oxidase-like activity of catalyzing the colorless 3,3',5,5'-tetramethylbenzidine (TMB) oxidation to its blue oxide, offering a visible color signal; by employing acid phosphatase (ACP) to hydrolyze ascorbic acid 2-phosphate (AAP), the generated ascorbic acid (AA) can chemically reduce the CPNs(Ⅳ) to CPNs(Ⅲ), which exhibit a remarkable fluorescence signal but lose the oxidase-mimicking ability to trigger the TMB chromogenic reaction; when pesticides exist, the enzymatic activity of ACP is restrained and the hydrolysis of AAP to AA is blocked, leading to the recovery of the catalytic TMB chromogenic reaction but the suppression of the fluorescence signal of CPNs(Ⅲ). According to this principle, by taking malathion as a pesticide model, dual-mode 'off-on-off' fluorescence and 'on-off-on' colorimetric detection of the pesticide with good sensitivity was realized. Excellent interference-tolerance and reliability were verified by applying it to analyze the target in real sample matrices. With good performance and practicability, the proposed dual-mode approach shows great potential in the facile and reliable monitoring of pesticide residues.

Polyphenol-based hydrogels: Pyramid evolution from crosslinked structures to biomedical applications and the reverse design

As a kind of nature-derived bioactive materials, polyphenol-based hydrogels possess many unique and outstanding properties such as adhesion, toughness, and self-healing due to their specific crosslinking structures, which have been widely used in biomedical fields including wound healing, antitumor, treatment of motor system injury, digestive system disease, oculopathy, and bioelectronics. In this review, starting with the classification of common polyphenol-based hydrogels, the pyramid evolution process of polyphenol-based hydrogels from crosslinking structures to derived properties and then to biomedical applications is elaborated, as well as the efficient reverse design considerations of polyphenol-based hydrogel systems are proposed. Finally, the existing problems and development prospects of these hydrogel materials are discussed. It is hoped that the unique perspective of the review can promote further innovation and breakthroughs of polyphenol-based hydrogels in the future.

•

Polyphenol-based hydrogels combine advantages of polyphenols with common hydrogels.

•

Cognition of such hydrogels underwent from structures to properties to applications.

•

Various crosslinked structures of such hydrogels can derive outstanding properties.

•

Such hydrogels can be widely used in biomedicine due to the outstanding properties.

•

Reverse design thought from applications to properties to structures is promising.

Iridium Single-Atomic Site Catalysts with Superior Oxygen Reduction Reaction Activity for Sensitive Monitoring of Organophosphorus Pesticides

Tremendous efforts have been made in developing single-atomic site catalysts (SASCs) for oxygen reduction reaction (ORR), which is regarded as a pivotal cornerstone in electrochemical energy conversion. However, SASCs for ORR have not been explored for electrochemical sensing. Herein, a template-sacrificed strategy is reported for the synthesis of atomically dispersed Ir SASCs, serving as a sensing platform to detect organophosphorus pesticides (OPs) with high sensitivity and selectivity. Owing to abundant Ir single-atom active sites, Ir SASCs show excellent ORR activity and stability in a neutral medium. It is found that the ORR activity of Ir SASCs can be inhibited by thiocholine, which is the hydrolysate of acetylthiocholine. After being integrated with acetylcholinesterase (AChE), the AChE-Ir SASC-based electrochemical sensor is established and shows a superior sensitivity, which shows a wide detection range of 0.5-500 ng mL^-1 with a low detection limit of 0.17 ng mL^-1 for OPs. This work exhibits a broad application prospect of ORR for sensitive detection of biomolecules.

AgCu@CuO aerogels with peroxidase-like activities and photoelectric responses for sensitive biosensing

Photoelectrochemical (PEC) enzymatic biosensors integrate the excellent selectivity of enzymes and high sensitivity of PEC bioanalysis, but the drawbacks such as high cost, poor stability, and tedious immobilization of natural enzymes on photoelectrodes severely suppress their applications. AgCu@CuO aerogel-based photoelectrode materials with both remarkable enzyme-like activities and outstanding photoelectric properties were innovatively designed and synthesized to evaluate the activity of xanthine oxidase with a wide linear detection range and a low limit of detection.

Background-free sensing platform for on-site detection of carbamate pesticide through upconversion nanoparticles-based hydrogel suit

On-site monitoring of carbamate pesticide in complex matrix remians as a challenge in terms of the real-time control of food safety and supervision of environmental quality. Herein, we fabricated robust upconversion nanoparticles (UCNPS)/polydopamine (PDA)-based hydrogel portable suit that precisely quantified carbaryl in complex tea samples with smartphone detector. UCNPS/PDA nanoprobe was developed by polymerization of dopamine monomers on the surface of NaErF₄: 0.5% Tm³⁺@NaYF₄ through electrostatic interaction, leading to efficient red luminescence quenching of UCNPS under near-infrared excitation, which circumvented autofluorescence and background interference in complicated environment. Such a luminescence quenching could be suppressed by thiocholine that was produced by acetylcholinesterase-mediated catalytic reaction, thus enabling carbaryl bioassay by inhibiting the activity of enzyme. Bestowed with the feasibility analysis of fluorescent output, portable platform was designed by integrating UCNPS-embedded sodium alginate hydrogel with 3D-printed smartphone device for quantitatively on-site monitoring of carbaryl in the range of 0.5-200 ng mL^-1 in tea sample, accompanied by a detection limit of 0.5 ng mL^-1. Owing to specific UCNPS signatures and hydrogel immobilization, this modular platform displayed sensitive response, portability and anti-interference capability in complex matrix analysis, thus holding great potential in point-of-care application.

Electrochemical biosensor based on CuPt alloy NTs-AOE for the ultrasensitive detection of organophosphate pesticides

The electrode material is vital for the performance of the electrochemical biosensor. Lately, many nanomaterials have been developed to improve the sensitivity and detection efficiency of the biosensors. In this work, a kind of one-dimensional nanomaterials, the CuPt alloy nanotubes with an open end (CuPt alloy NTs-AOE), was explored. The nanotubes with an open end can provide a larger electrochemical active surface area and more active sites for the immobilization of enzyme. The CuPt alloy displays excellent conductivity and catalytic activity. In addition, the Cu shows the great affinity to thio-compounds, which can greatly enhance the detection efficiency and sensitivity. As a result, the prepared biosensor demonstrates the wider linear range of 9.98 × 10^-10-9.98 × 10^-5g l^-1for fenitrothion and 9.94 × 10^-11-9.94 × 10^-4g l^-1for dichlorvos (as model OPs ) and with the lower detection limit of 1.84 × 10^-10g l^-1and 6.31 × 10^-12g l^-1(S/N = 3), respectively. Besides, the biosensor has been used to detect the real samples and obtains satisfactory recoveries (95.58%-100.56%).

Conductive Hydrogel-Based Electrochemical Sensor: A Soft Platform for Capturing Analyte

Electrode modifications for electrochemical sensors attract a lot of attention every year. Among them, hydrogels are a relatively special class of electrode modifier. Since hydrogels often contain polymers, even though they are conductive polymers, they are not ideal electrode modifiers because of their poor conductivity. However, the micro-aqueous environment and the three-dimensional structure of hydrogels are an excellent platform for immobilizing bioactive molecules and maintaining their activity. This gives the hydrogel-modified electrochemical sensor the potential to perform specific recognition. At the same time, the rapid development of nanomaterials also makes the composite hydrogel have good electrical conductivity. This has led many scientists to become interested in hydrogel-based electrochemical sensors. In this review, we summarize the development process of hydrogel-based electrochemical sensors, starting from 2000. Hydrogel-based electrochemical sensors were initially used only as a carrier for biomolecules, mostly for loading enzymes and for specific recognition. With the widespread use of noble metal nanoparticles and carbon materials, hydrogels can now be used to prepare enzyme-free sensors. Although there are some sporadic studies on the use of hydrogels for practical applications, the vast majority of reports are still limited to the detection of common model molecules, such as glucose and H2O2. In the review, we classify hydrogels according to their different conducting strategies, and present the current status of the application of different hydrogels in electrochemical sensors. We also summarize the advantages and shortcomings of hydrogel-based electrochemical sensors. In addition, future prospects regarding hydrogel for electrochemical sensor use have been provided at the end.

Norepinephrine-induced AuPd aerogels with peroxidase- and glucose oxidase-like activity for colorimetric determination of glucose

A simple and efficient method was used to synthesize norepinephrine-induced AuPd aerogels (AuPd-NE) with dual enzyme properties, i.e. glucose oxidase-like property, and peroxidase-like property. Thus, AuPd-NE aerogels can be considered as a tandem nanozyme with tandem enzyme-like activity. In the presence of AuPd-NE aerogels, glucose can be decomposed into gluconic acid and H₂O₂. Then, H₂O₂ will continue to decompose into ·OH and H₂O. The generated ·OH will oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue products of ox-TMB. Accordingly, an enzyme-free method based on AuPd-NE aerogels was proposed for sensitive colorimetric detection of glucose. The linear range of the developed method was 30 to 250 μM, and the limit of detection was 10 μM. The method presents reliable applicability for blood glucose detection in human serum samples. This study will deepen the understanding of tandem nanozymes and then rationally design tandem nanozymes for many fascinating biomedical applications. A simple, sensitive and reliable one-pot enzyme-free colourimetric assay for glucose was developed.

A novel affinity peptide-antibody sandwich electrochemical biosensor for PSA based on the signal amplification of MnO2-functionalized covalent organic framework

This work describes a novel affinity peptide-antibody sandwich electrochemical strategy for the ultrasensitive detection of prostate-specific antigen (PSA). Herein, polydopamine-coated boron-doped carbon nitride (Au@PDA@BCN) was synthesized and used as a sensing platform to anchor gold nanoparticles and immobilize primary antibody. Meanwhile, AuPt metallic nanoparticle and manganese dioxide (MnO₂)-functionalized covalent organic frameworks (AuPt@MnO₂@COF) was facilely synthesized to serve as a nanocatalyst and ordered nanopore for the enrichment and amplification of signal molecules (methylene blue, MB). PSA affinity peptide was bound to AuPt@MnO₂@COF to form Pep/MB/AuPt@MnO₂@COF nanocomposites (probe). The peptide-PSA-antibody sandwich biosensor was constructed, and the redox signal of MB was measured with the existence of PSA. The fabricated sensor exhibited a linear response (0.00005-10 ng mL^-1) with a low detection limit of 16.7 fg mL^-1 under the optimum condition. Additionally, the sensor showed an excellent selectivity, ideal repeatability, and good stability for PSA detection in real samples. Furthermore, the porous structure of COF can enrich more MB molecules and increase the sensitivity of the biosensor. This study provides an efficient and ultrasensitive strategy for PSA detection and broadens the use of organic/inorganic porous nanocomposite in biosensing.

Immobilizing Enzymes on Noble Metal Hydrogel Nanozymes with Synergistically Enhanced Peroxidase Activity for Ultrasensitive Immunoassays by Cascade Signal Amplification

Enzyme immobilization plays an essential role in solving the problems of the inherently fragile nature of enzymes. Although prominent stability and reuse of enzymes can be achieved by enzyme immobilization, their bioactivity and catalytic efficiency will be adversely affected. Herein, PdCu hydrogel nanozymes with a hierarchically porous structure were used to immobilize horseradish peroxidase (HRP) to obtain PdCu@HRP. In addition to the improvement of stability and reusability, PdCu@HRP displayed synergistically enhanced activities than native HRP and PdCu hydrogels. Not only the specific interactions between PdCu hydrogel nanozymes and enzymes but also the enrichment of substrates around enzymes by electrostatic adsorption of hydrogels was proposed to expound the enhanced catalytic activity. Accordingly, by taking advantage of the excellent catalytic performance of the PdCu@HRP and the glucose oxidase encapsulated in zeolitic imidazolate framework-8, colorimetric biosensing of the carcinoembryonic antigen via catalytic cascade reactions for achieving signal amplification was performed. The obtained biosensor enhanced the detection sensitivity by approximately 6.1-fold as compared to the conventional HRP-based enzyme-linked immunosorbent assay, demonstrating the promising potential in clinical diagnosis.

A stretchable glove sensor toward rapid monitoring of trifluralin: A new platform for the on-site recognition of herbicides based on wearable flexible sensor technology using lab-on-glove

In this study, a flexible glove-based electrochemical sensor as a wearable point-of-use screening tool has been fabricated for defense and food security applications. To design the wearable glove-based sensor, we drew conductive patterns on the fingers of a rubber glove via gold@silver-modified graphene quantum dots (Au@Ag core-shell/graphene quantum dots [GQDs]) nano-ink with optimal thickness. Then, this platform is combined with a portable electrochemical analyzer for on-site detection of trifluralin pesticide in the range of 10 nM to 1 mM with the low limit of quantification (LLOQ) of 10 nM. The high efficiency and distinction of the trifluralin at specified concentrations in real leaf and apple samples were performed by simply touching with the glove and in spikes solution by immersing of fingertips. With their high sensitivity, selectivity, rapid, and easy operation pesticide analysis, these glove-embedded sensors can also be engaged in on-site monitor of other chemical threats and can be expanded to water and environmental samples.

Ultrasensitive Microfluidic Paper-Based Electrochemical/Visual Analytical Device via Signal Amplification of Pd@Hollow Zn/Co Core-Shell ZIF67/ZIF8 Nanoparticles for Prostate-Specific Antigen Detection

An effective signal amplification strategy is essential to enhance the analytical performance of microfluidic paper-based analytical devices (μPADs) for tracing biomarkers. Here, a simple but efficient approach with superior electrocatalytic performance of Pd@hollow Zn/Co core-shell ZIF67/ZIF8 nanoparticles for regulating the efficacious signal amplification process was utilized to realize the detection of prostate-specific antigen (PSA). By rationally designing the core-shell structure of ZIF67/ZIF8 with hollow characteristics on the nanoscale and introducing the noble metal element Pd into the cavity, the diffusion limitation and porous confinement reduction of the obtained nanomaterials with uniform morphology and satisfactory chemical stability could be realized, which endowed it with better catalytic performance than solid metal-organic frameworks (MOFs) and ensured effective signal amplification of H₂O₂ reduction for achieving enhanced electrochemical signals. Moreover, with the assistance of signal probes, the remaining H₂O₂ could flow to the color area to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine to form a colored product by changing the spatial configuration of the μPAD, thus realizing the visual detection of PSA. On the basis of this novel analytical device, dual-mode ultrasensitive detection of PSA could be achieved with a lower limit of detection of 0.78 pg/mL (S/N = 3) and a wider linear range from 5 pg/mL to 50 ng/mL. This work provided the opportunity of introducing the noble metal element Pd into the cavity of the MOF hollow structure to improve its electrocatalytic efficiency and construct a high-performance μPAD for clinical detection of other biomarkers.

Extraction and electrochemical sensing of pesticides in food and environmental samples by use of polydopamine-based materials

Polydopamine has high adsorption capacities for pollutants such as pesticides in food and environmental matrices. Consequently, it has found applications in some sorbent-based micro-extraction techniques such as solid phase micro-extraction and magnetic solid phase extraction. This paper gives a detailed review of the application of polydopamine-based adsorbents for the extraction of pesticides in food and environmental matrices using these techniques. The adhesive properties of polydopamine have made it to be a suitable material for the immobilisation of the components of electrochemical sensors used to detect pesticides in food and environmental matrices. This paper also gives a comprehensive review on the application of polydopamine in electrochemical sensors such as acetylcholinesterase sensors, molecularly imprinted sensors and aptasensors. The use of polydopamine-based adsorbents during the extraction and electrochemical sensing of pesticides in food and environmental matrices is not free of challenges. In this review, the challenges encountered during the use of polydopamine-based adsorbents are also discussed.