Indoor-outdoor distribution and risk assessment of volatile organic compounds in the atmosphere of industrial and urban areas

The association between clustering based on composition of volatile organic compound in indoor air and building-related symptoms

Volatile organic compounds (VOCs) have been suspected to cause building-related symptoms (BRSs). Although some studies investigated the association between BRSs and VOCs in indoor air, those results were inconsistent. This study investigated the contamination status of VOCs in the indoor air of 154 houses in Japan. Additionally, these samples were grouped by hierarchical clustering analysis based on the VOC composition, and the relationship between a VOC cluster and the BRSs was investigated. The median concentration of the sum of VOCs (ΣVOCs) was 140 μg m-3 (range: 18-3500 μg m-3). The levels of acetaldehyde in four samples and p-dichlorobenzene in one sample exceeded the guideline value. As a result of the hierarchical clustering analysis, the samples in this study were divided into six characteristic clusters based on the VOC composition. The ΣVOCs in cluster 1 were significantly lower than those in other clusters. In cluster 2, acyclic and aromatic hydrocarbons were dominant. Cluster 3 had a relatively high proportion of limonene. In cluster 4, the concentrations and composition ratios of α-pinene were higher than those of other clusters. In cluster 5, p-dichlorobenzene accounted for 42 %-72 % of the total VOCs. Cluster 6 had a relatively high proportion of decamethyl cyclopentasiloxane. This clustering likely depended on the construction of houses and lifestyles. As a result of logistic regression analysis, cluster 5 was associated with the cough symptoms of the BRSs. The results of the present study suggest that investigating the association between VOCs and BRSs is necessary to consider not only total concentrations such as TVOC and ΣVOCs but also VOC composition.

VOC emitted by biopharmaceutical industries: Source profiles, health risks, and secondary pollution

The biopharmaceutical industry contributes substantially to volatile organic compounds (VOCs) emissions, causing growing concerns and social developmental conflicts. This study conducted an on-site investigation of the process-based emission of VOCs from three biopharmaceutical enterprises. In the workshops of the three enterprises, 26 VOCs were detected, which could be sorted into 4 classes: hydrocarbons, aromatic hydrocarbons, oxygen-containing compounds, and nitrogen-containing compounds. Ketones were the main components of waste gases, accounting for 44.13%-77.85% of the overall VOCs. Process-based source profiles were compiled for each process unit, with the fermentation and extraction units of tiamulin fumarate being the main source of VOC emissions. Dimethyl heptanone, vinyl acetate, diethylamine, propylene glycol methyl ether (PGME), and benzene were screened as priority pollutants through a fuzzy comprehensive evaluation system. Ground level concentration simulation results of the Gauss plume diffusion model demonstrated that the diffusivity of VOCs in the atmosphere was relatively high, indicating potential non-carcinogenic and carcinogenic risks 1.5-2 km downwind. Furthermore, the process-based formation potentials of ozone and secondary organic aerosols (SOAs) were determined and indicated that N-methyl-2-pyrrolidone, dimethyl heptanone, and PGME should be preferentially controlled to reduce the ozone formation potential, whereas the control of benzene and chlorobenzene should be prioritized to reduce the generation of SOAs. Our results provide a basis for understanding the characteristics of VOC emission by biopharmaceutical industries and their diffusion, potentially allowing the development of measures to reduce health risks and secondary pollution.

Latin America and the Caribbean Code Against cancer 1st edition: Environment, occupation, and cancer

Within the framework of the Latin America and Caribbean region (LAC) Code Against Cancer 1st edition, the current work presents recommendations to reduce exposure to environmental and occupational carcinogenic agents relevant for LAC. Using the methodology established by the International Agency for Research on Cancer (IARC) in the World Code Against Cancer Framework and experience from developing the European Code Against Cancer 4th edition, a working group of LAC cancer-prevention experts reviewed the list of Group I IARC carcinogenic agents, identified prevalent environmental and occupational exposures in the region, and proposed evidence-based cancer prevention recommendations suited to the epidemiological, socioeconomic, and cultural conditions of LAC countries. Two sets of recommendations were drafted: those targeting the general public and a second set for policymakers. Outdoor and indoor air pollution, ultra-violet radiation and occupational exposures to silica dust, asbestos, benzene, diesel, and welding fumes were identified as prevalent carcinogens in LAC and as agents that could be reduced or eliminated to prevent cancers. Recommendations for additional risk factors were not included due to insufficient data of their attributable burden in LAC (sunbeds, radon, aflatoxin), or lack of a clear preventive action to be taken by the individual (arsenic in drinking water, medical radiation), or lack of evidence of carcinogenicity effect (bisphenol A, phthalates, and pesticides). A broad consensus was reached on environmental and occupational carcinogenic exposures present throughout the LAC region and on individual-level and public policy-level recommendations to reduce or eliminate these exposures. Key educational content for the dissemination of these recommendations was also developed as part of LAC Code Against Cancer 1st Edition.

Research progress in human biological monitoring of aromatic hydrocarbon with emphasis on the analytical technology of biomarkers

Aromatic hydrocarbons are unsaturated compounds containing carbon and hydrogen that form single aromatic ring, or double, triple, or multiple fused rings. This review focuses on the research progress of aromatic hydrocarbons represented by polycyclic aromatic hydrocarbons (including halogenated polycyclic aromatic hydrocarbons), benzene and its derivatives including toluene, ethylbenzene, xylenes (o-, m- and p-), styrene, nitrobenzene, and aniline. Due to the toxicity, widespread coexistence, and persistence of aromatic hydrocarbons in the environment, accurate assessment of exposure to aromatic hydrocarbons is essential to protect human health. The effects of aromatic hydrocarbons on human health are mainly derived from three aspects: different routes of exposure, the duration and relative toxicity of aromatic hydrocarbons, and the concentration of aromatic hydrocarbons which should be below the biological exposure limit. Therefore, this review discusses the primary exposure routes, toxic effects on humans, and key populations, in particular. This review briefly summarizes the different biomarker indicators of main aromatic hydrocarbons in urine, since most aromatic hydrocarbon metabolites are excreted via urine, which is more feasible, convenient, and non-invasive. In this review, the pretreatment and analytical techniques are compiled systematically for the qualitative and quantitative assessments of aromatic hydrocarbons metabolites such as gas chromatography and high-performance liquid chromatography with multiple detectors. This review aims to identify and monitor the co-exposure of aromatic hydrocarbons that provides a basis for the formulation of corresponding health risk control measures and guide the adjustment of the exposure dose of pollutants to the population.

Legacy and emerging pollutants in Latin America: A critical review of occurrence and levels in environmental and food samples

The increase and indiscriminate use of personal care products, food products, fertilizers, pesticides, and health products, among others, have resulted/are resulting in extensive environmental contamination. Most of these products contain traces of widespread chemicals, usually known as emerging pollutants (EPs) or pollutants of emerging concern (PEC). The Latin American (LA) region comprises 20 countries with different social and cultural aspects, with 81 % of the population living in urban areas. The LA region has some countries on the top list of users/consumers of EPs, from pesticides and fertilizers to personal care products. However, there is a gap in information related to the distribution of EPs in the environment of this region, with very few existing review texts exploring this issue. Therefore, this present paper advances this approach. An exhaustive literature review, with the selection of 176 documents, provided unique up-to-date information on the presence/distribution of 17 classes of legacy or emerging pollutants in different food and environmental matrices (soil, sediment, water, and air). The study shows that the wide distribution and recorded levels of these pollutants in the continental environment are potential risks to human health, mainly through food and drinking water ingestion. Polycyclic aromatic hydrocarbons are pollutants of deep public concern since they show carcinogenic properties. Several classes of pollutants, like endocrine disruptors, have caused harmful effects on humans and the environment. Besides that, pharmaceutical products and pesticides are compounds of high consumption worldwide, being environmental contamination a real and ongoing possibility. Finally, gaps and future research needs are deeply pointed out.

Indoor Air Pollution and the Health of Vulnerable Groups: A Systematic Review Focused on Particulate Matter (PM), Volatile Organic Compounds (VOCs) and Their Effects on Children and People with Pre-Existing Lung Disease

Air pollution affects health, but much of the focus to this point has been on outdoor air. Higher indoor pollution is anticipated due to increasingly energy-efficient and less leaky buildings together with more indoor activities. Studies of indoor air pollution focusing on children and people with respiratory disease from the database Web of Science (1991–2021) were systemically reviewed according to the PRISMA guidelines, with 69 studies included in the final selection. Emissions from building materials affected indoor air quality, and ventilation also had an influence. The main indoor air pollutants are Volatile Organic Compounds (VOCs) and Particulate Matter (PM). PM sources included smoking, cooking, heating, candles, and insecticides, whereas sources of coarse particles were pets, housework and human movements. VOC sources included household products, cleaning agents, glue, personal care products, building materials and vehicle emissions. Formaldehyde levels were particularly high in new houses. Personal exposure related to both indoor and outdoor pollutant levels, highlighting home characteristics and air exchange rates as important factors. Temperature, humidity, educational level, air purifiers and time near sources were also related to personal exposure. There was an association between PM and Fractional exhaled Nitric Oxide (FeNO), lung function, oxygen saturation, childhood asthma and symptoms of chronic obstructive pulmonary disease (COPD) patients. High VOCs were associated with upper airways and asthma symptoms and cancer. Effective interventional studies for PM in the future might focus on human behavior together with air purifiers and increased ventilation, whereas VOC interventions might center more on building materials and household products, alongside purification and ventilation.

Multivariate Statistical Analysis for the Detection of Air Pollution Episodes in Chemical Industry Parks

Air pollution episodes (APEs) caused by excessive emissions from chemical industry parks (CIPs) have resulted in severe environmental damage in recent years. Therefore, it is of great importance to detect APEs timely and effectively using contaminant measurements from the air quality monitoring network (AQMN) in the CIP. Traditionally, APE can be detected by determining whether the contaminant concentration at any ambient monitoring station exceeds the national environmental standard. However, the environmental standards used are unified in various ambient monitoring stations, which ignores the source–receptor relationship in the CIP and challenges the effective detection of excessive emissions in some scenarios. In this paper, an approach based on a multivariate statistical analysis (MSA) method is proposed to detect the APEs caused by excessive emissions from CIPs. Using principal component analysis (PCA), the spatial relationships hidden among the historical environmental monitoring data are extracted, and the high-dimensional data are projected into only two subspaces. Then, two monitoring indices, T2 and Q, which represent the variability in these subspaces, are utilized to monitor the pollution status and detect the potential APEs in the CIP. In addition, the concept of APE detectability is also defined, and the condition for APE detectability is derived, which explains when the APEs can be detectable. A simulated case for a CIP in Zhejiang province of China is studied to evaluate the performance of this approach. The study indicates that the method can have an almost 100% APE detection rate. The real-world measurements of Total Volatile Organic Compounds (TVOC) at a 10-min time interval from 3 December 2020∼12 December 2020 are also analyzed, and 64 APEs caused by excessive TVOC emissions are detected in a total of 1440 time points.

Altered Fecal Metabolomics and Potential Biomarkers of Psoriatic Arthritis Differing From Rheumatoid Arthritis

Psoriatic arthritis (PsA) is a chronic inflammatory joint disease, and the diagnosis is quite difficult due to the unavailability of reliable clinical markers. This study aimed to investigate the fecal metabolites in PsA by comparison with rheumatoid arthritis (RA), and to identify potential diagnostic biomarkers for PsA. The metabolic profiles of the fecal samples from 27 PsA and 29 RA patients and also 36 healthy controls (HCs) were performed on ultra-high-performance liquid chromatography coupled with hybrid triple quadrupole time-of-flight mass spectrometry (UHPLC-Q-TOF-MS). And differentially altered metabolites were screened and assessed using multivariate analysis for exploring the potential biomarkers of PsA. The results showed that 154 fecal metabolites were significantly altered in PsA patients when compared with HCs, and 45 metabolites were different when compared with RA patients. A total of 14 common differential metabolites could be defined as candidate biomarkers. Furthermore, a support vector machines (SVM) model was performed to distinguish PsA from RA patients and HCs, and 5 fecal metabolites, namely, α/β-turmerone, glycerol 1-hexadecanoate, dihydrosphingosine, pantothenic acid and glutamine, were determined as biomarkers for PsA. Through the metabolic pathways analysis, we found that the abnormality of amino acid metabolism, bile acid metabolism and lipid metabolism might contribute to the occurrence and development of PsA. In summary, our research provided ideas for the early diagnosis and treatment of PsA by identifying fecal biomarkers and analyzing metabolic pathways.

Cross-Linked Polyphosphazene Nanospheres Boosting Long-Lived Organic Room-Temperature Phosphorescence

Long-lived organic room-temperature phosphorescence (RTP) has sparked intense explorations, owing to the outstanding optical performance and exceptional applications. Because triplet excitons in organic RTP experience multifarious relaxation processes resulting from their high sensitivity, spin multiplicity, inevitable nonradiative decay, and external quenchers, boosting RTP performance by the modulated triplet-exciton behavior is challenging. Herein, we report that cross-linked polyphosphazene nanospheres can effectively promote long-lived organic RTP. Through molecular engineering, multiple carbonyl groups (C═O), heteroatoms (N and P), and heavy atoms (Cl) are introduced into the polyphosphazene nanospheres, largely strengthening the spin-orbit coupling constant by recalibrating the electronic configurations between singlet (S_n) and triplet (T_n) excitons. In order to further suppress nonradiative decay and avoid quenching under ambient conditions, polyphosphazene nanospheres are encapsulated with poly(vinyl alcohol) matrix, thus synchronously prompting phosphorescence lifetime (173 ms longer), phosphorescence efficiency (∼12-fold higher), afterglow duration time (more than 20 s), and afterglow absolute luminance (∼19-fold higher) as compared with the 2,3,6,7,10,11-hexahydroxytriphenylene precursor. By measuring the emission intensity of the phosphorescence, an effective probe based on the nanospheres is developed for visible, quantitative, and expeditious detection of volatile organic compounds. More significantly, the obtained films show high selectivity and robustness for anisole detection (7.1 × 10^-4 mol L^-1). This work not only demonstrates a way toward boosting the efficiency of RTP materials but also provides a new avenue to apply RTP materials in feasible detection applications.

Risk Assessment of Indoor Air Quality and Its Association with Subjective Symptoms among Office Workers in Korea

The 2014 Time-Use Survey of Statistics Korea revealed that office workers are increasingly spending more than eight hours at work. This study conducted an exposure assessment for office workers in Korea. Indoor and outdoor air pollutants were measured in offices. A self-administered questionnaire was employed to determine work information, indoor air quality (IAQ) awareness, and subjective symptoms for 328 workers. Indoor air concentrations for measured air pollutants were below IAQ guideline values. The average concentrations of target air pollutants did not show significant differences except for benzene, which had relatively a higher concentration in national industrial complexes. The indoor benzene, ethylbenzene, and acetaldehyde concentrations were higher in offices where workers were having dry eye, ophthalmitis, and headache symptoms. This study provides reference values to manage IAQ in offices, suggesting that if the benzene concentration exceeds 4.23 μg/m³ in offices, it could cause dry eye symptoms. Considering the increasing working hours for office workers and health effects, workers' exposure to indoor pollutants should be reduced. In addition, the IAQ was heavily influenced by outdoor air levels and various indoor sources. Therefore, in areas with relatively high air pollution, greater monitoring and management is required considering the influence of outdoor air quality.

Formaldehyde, acrolein and other carbonyls in dwellings of university students. Levels and source characterization

Fifteen carbonyl compounds were investigated in the living rooms and bedrooms of 25 university student flats in the urban area of Ciudad Real (Central Southern Spain) in wintertime. Carbonyls were sampled using Radiello ® passive samplers refilled in the laboratory according to the method described in ISO 16000-3 Standard. The most abundant carbonyls in the living rooms and bedrooms were formaldehyde, acetone, acetaldehyde, hexaldehyde and butyraldehyde. The median concentration levels in the living rooms and bedrooms were: 28.6 and 34.2 μg m^-3 for formaldehyde, 18.3 and 23.1 μg m^-3 for acetone, 14.3 and 15.8 μg m^-3 for acetaldehyde, 11.4 and 14.1 μg m^-3 for hexaldehyde and 10.8 and 12.4 μg m^-3 for butyraldehyde. The median concentration of formaldehyde, benzaldehyde, valeraldehyde and hexaldehyde was significantly higher in the bedrooms than in the living rooms. Indoor concentrations were significantly higher than outdoor concentrations for all carbonyl measured, indicating that sources in the indoor environment are prevailing in all flats. Principal component analysis, multiple linear regressions and Spearman correlation coefficients were used to investigate the origin, the indoor pollutants determinants and to establish common sources between carbonyls. Eight components were extracted from the application of PCA to the indoor and outdoor measurements accounting for 97.7% of the total variance. Formaldehyde, acetone, acetaldehyde and acrolein presented different indoor sources. In the multiple linear regression analysis, higher formaldehyde concentrations were found in those living rooms with wood floor and smoking was positively associated to acetone, propionaldehyde, benzaldehyde and isovaleraldehyde. Formaldehyde, acetaldehyde, acrolein, acetone, propionaldehyde and benzaldehyde concentrations were compared with relevant international guidelines, being their concentrations below recommended values except acrolein, where all measured flats exceeded the reference levels; it would be important to focus on the characterization of emission sources of acrolein in indoor air in order to minimise the exposure and health risk.

Odor-active volatile organic compounds along the seafront of Thessaloniki, Greece. Implications for sources of nuisance odor

Volatile organic compounds (VOCs) have long been associated with odor nuisance at urban sites close to emission sources. Sulfur containing volatile organic compounds (VOSCs) in particular, constitute a major category of malodorous compounds since some of them are characterized by intense odor and low odor thresholds. VOSCs have both, anthropogenic and biogenic sources. The purpose of this study was to assess the concentration levels of a variety of VOCs (mercaptans, sulfides, thiophenes, aromatics and aldehydes) along the seafront of the city of Thessaloniki, northern Greece, a city with frequent citizen complaints for nuisance odor. 1-Hour sampling on adsorption tubes was carried out concurrently at 3 sites along the seafront of the city (EAST, CENTER and WEST) three times during the day in winter and summer 2020. VOCs analysis, performed on a Thermal Desorption - Gas Chromatography/Mass Spectroscopy (TD-GC/MS) system. Diurnal and seasonal variations, and correlations with prevailing meteorological conditions were investigated. Concentrations found along the seafront were compared to previous data from inner-city sites affected by urban and/or industrial activities. Most VOCs were found at lower concentrations at the seafront in comparison to inner-city sites demonstrating better air quality. Typical biogenically-deriving VOSCs such as carbonyl sulfide and dimethyl sulfide were found at the seafront either at higher or at similar levels with inner city thus suggesting negligible contribution from biogenic sources. Odor activity values were further calculated and assessed. Odor nuisance at all seafront sites was significantly higher in winter, being in both seasons maximum at the WEST seafront that is closer to port activities, polluted creek estuaries and industrial facilities. Mercaptans were identified as the major contributors to odor pollution followed by aldehydes. The new findings described in this study might contribute to the better understanding of the odor pollution from VOCs at coastal urban sites.

Modified Red Mud Catalyst for Volatile Organic Compounds Oxidation

Red mud waste from the aluminium industry was modified by leaching using hydrochloric acid or oxalic acid with additives, followed by precipitation or evaporation. The prepared catalysts were characterized in detail and tested for toluene total oxidation. The samples prepared by precipitation of the leachate by adding a base gave a much better performance in catalytic oxidation than the ones prepared by just evaporating the leachate. These improved performances can be correlated to the enhanced textural and redox properties of the catalysts due to the better dispersion and higher enrichment of Fe oxides at their surface. The best performing catalyst had a light-off temperature of around 310 °C and complete oxidation took place at around 380 °C.

Human health risk associated to particulate matter and polycyclic aromatic hydrocarbon levels and their relation with preponderant sources in Gran La Plata, Argentina

Levels of suspended particulate matter (PM) of both fractions PM₁₀ and PM_2.5 in ambient air were monitored in three areas of Gran La Plata: industrial, urban, and residential (2017-2019). Associated polycyclic aromatic hydrocarbons (PAHs) and nitropolycyclic aromatic hydrocarbons (NPAHs) to PM were also determined and possible emission sources were identified. Assessment of health risk to PM exposure and associated compounds was realized. Results showed a decrease in levels of PM₁₀ in each area along the period studied, especially in the industrial area. Decreases in PM_2.5 levels were also observed in urban and residential areas over the years, although the trend is not as marked as with PM₁₀ levels. Then, PM_2.5 levels in the industrial area have remained practically constant. The 89% of both PM₁₀ and PM_2.5 annual mean exceeds the WHO reference values. The presence of most of the 16 US EPA priority PAHs studied was found with a detection frequency greater than 60% and it was possible to identify the importance of the contributions of vehicular emissions as predominant sources of PAH emission. From the calculations of the risk of contracting cancer throughout life (LCR), in the case of adults, the US EPA limits were not complied in the industrial and urban areas and in both fractions of PM. From the evaluation of the burden of disease (EBD), the calculated relative risks of mortality were very similar for the studied districts, being the relative risk in La Plata slightly lower, about 3-5%, than those in Berisso and Ensenada.

Occurrence, spatial distribution, seasonal variations, potential sources, and inhalation-based health risk assessment of organic/inorganic pollutants in ambient air of Tehran

The present study evaluated the concentrations, spatial distribution, seasonal variations, potential sources, and risk assessment of organic/inorganic pollutants in ambient air of Tehran city. Totally, 180 air samples were taken from 9 sampling stations from March 2018 to March 2019 and were analyzed to determine the concentrations of organic pollutants (BTEX compounds and PM_2.5-bound PAHs) plus inorganic pollutants (PM_2.5-bound metals and asbestos fibers). The results revealed that the mean concentrations of ∑ PAHs, BTEX, ∑ heavy metals, and asbestos fibers were 5.34 ng/m³, 60.55 µg/m³, 8585.12 ng/m³, and 4.13 fiber/ml in the cold season, respectively, and 3.88 ng/m³, 33.86 µg/m³, 5682.61 ng/m³, and 3.21 fiber/ml in the warm season, respectively. Source apportionment of emission of the air pollutants showed that PAHs are emitted from diesel vehicles and industrial activities. BTEX and asbestos are also released mainly by vehicles. The results of the inhalation-based risk assessment indicated that the carcinogenic risk of PAHs, BTEX, and asbestos exceeded the recommended limit by The US environmental protection agency (US EPA) and WHO (1 × 10^-4). The risk of carcinogenesis of heavy metal of lead and chromium also exceeded the recommended limit. Thus, proper management strategies are required to control the concentration of these pollutants in Tehran's ambient air in order to maintain the health of Tehran's citizens.

Trichoderma Strains and Metabolites Selectively Increase the Production of Volatile Organic Compounds (VOCs) in Olive Trees

Plants emit volatile organic compounds (VOCs) that induce metabolomic, transcriptomic, and behavioral reactions in receiver organisms, including insect pollinators and herbivores. VOCs’ composition and concentration may influence plant-insect or plant-plant interactions and affect soil microbes that may interfere in plant-plant communication. Many Trichoderma fungi act as biocontrol agents of phytopathogens and plant growth promoters. Moreover, they can stimulate plant defense mechanisms against insect pests. This study evaluated VOCs’ emission by olive trees (Olea europaea L.) when selected Trichoderma fungi or metabolites were used as soil treatments. Trichoderma harzianum strains M10, T22, and TH1, T. asperellum strain KV906, T. virens strain GV41, and their secondary metabolites harzianic acid (HA), and 6-pentyl-α-pyrone (6PP) were applied to olive trees. Charcoal cartridges were employed to adsorb olive VOCs, and gas chromatography mass spectrometry (GC-MS) analysis allowed their identification and quantification. A total of 45 volatile compounds were detected, and among these, twenty-five represented environmental pollutants and nineteen compounds were related to olive plant emission. Trichoderma strains and metabolites differentially enhanced VOCs production, affecting three biosynthetic pathways: methylerythritol 1-phosphate (MEP), lipid-signaling, and shikimate pathways. Multivariate analysis models showed a characteristic fingerprint of each plant-fungus/metabolite relationship, reflecting a different emission of VOCs by the treated plants. Specifically, strain M10 and the metabolites 6PP and HA enhanced the monoterpene syntheses by controlling the MEP pathway. Strains GV41, KV906, and the metabolite HA stimulated the hydrocarbon aldehyde formation (nonanal) by regulating the lipid-signaling pathway. Finally, Trichoderma strains GV41, M10, T22, TH1, and the metabolites HA and 6PP improve aromatic syntheses at different steps of the shikimate pathway.

Regeneration of Hopcalite used for the adsorption plasma catalytic removal of toluene by non-thermal plasma

A dielectric barrier discharge reactor packed with both Hopcalite & glass beads has been investigated for the total oxidation of toluene adsorbed on Hopcalite. The catalytic activity and selectivity through the possible formation of by-products during the NTP discharge for the abatement of irreversibly adsorbed toluene have been investigated by FT-IR and mass spectrometer. The regeneration of the used Hopcalite by NTP discharge has been established by (i) determining the amount of toluene adsorbed on NTP regenerated Hopcalite, (ii) investigating the catalytic activity of NTP regenerated Hopcalite and (iii) comparing the bulk and surface properties of the fresh calcined and NTP regenerated Hopcalite. The ratio of amount of irreversibly adsorbed toluene to that of the total amount of adsorbed toluene adsorbed is similar for the fresh calcined and NTP (I) regenerated Hopcalite. The catalytic activity of the NTP (I) regenerated Hopcalite is slightly enhanced when compared to that of the fresh calcined Hopcalite. Although the first NTP treatment induces partial transformation of Hopcalite into Mn₃O₄ with no detected related CuO_x and reduces specific surface area by a factor of 2, the toluene adsorption capacity remains less affected. A plausible reaction scheme for toluene decomposition in Hopcalite PBDBD reactor is proposed.

Process-based VOCs source profiles and contributions to ozone formation and carcinogenic risk in a typical chemical synthesis pharmaceutical industry in China

The chemical synthesis pharmaceutical industry plays an important role in VOCs emissions from industrial sources, which has caused increasing concern. In this study, the process-based pollution characteristics of VOCs from the chemical synthesis pharmaceutical industry were investigated in the Yangtze River Delta, China. A total of 16 samples were collected from 12 process units (including 5 production lines and 2 postprocessing units) and 2 factory boundary sites. 116 VOCs species were analyzed and sorted into 6 classes, including alkanes, alkenes, acetylene, aromatics, halocarbons and oxygenated VOCs (OVOCs). The concentration of stack VOCs was 3.37 × 10⁴ μg·m^-3, while the concentration of fugitive VOCs from other process units ranged from 827 μg·m^-3 to 2.11 × 10⁴ μg·m^-3. Aromatics, halocarbons and OVOCs accounted for a relatively high proportion in all process units. Process-based source profiles of each process unit were compiled. Generally, toluene, dichloromethane, ethanol, methanol and acetone were the most abundant species in all process units. Furthermore, the process-based ozone formation potentials (OFPs) and carcinogenic risk potentials (CRPs) were calculated, suggesting that toluene, methanol, ethanol and m/p-xylene should be preferentially controlled to reduce the OFPs, while acetaldehyde and chloroform were the priority control species to reduce the CRPs. Further discussion showed that ambient VOCs pollution at the factory boundary was affected by both stack and fugitive sources from the production process. The source profiles built in this study are necessary addition to the current profiles and are a good reference to study VOCs emission characteristics from the perspective of the process procedure. The results obtained from this work provide a guidance for effective VOCs abatement strategies and further lay a foundation for related research on VOCs in the chemical synthesis pharmaceutical industry.

Vapor Intrusion Investigations and Decision-Making: A Critical Review

At sites impacted by volatile organic compounds (VOCs), vapor intrusion (VI) is the pathway with the greatest potential to result in actual human exposure. Since sites with VI were first widely publicized in late 1990s, the scientific understanding of VI has evolved considerably. The VI conceptual model has been extended beyond relatively simple scenarios to include nuances, such as biological and hydrogeological factors that may limit the potential for VI and alternative pathways, such as preferential pathways and direct building contact/infiltration that may enhance VI in some cases. Regulatory guidance documents typically recommend initial concentration- or distance-based screening to evaluate whether VI may be a concern, followed by a multiple-lines-of-evidence (MLE) investigation approach for sites that do not screen out. These recommendations for detailed evaluation of VI currently focus on monitoring of VOC concentrations in groundwater, soil gas, and indoor air and can be supplemented by other lines of evidence. In this Critical Review, we summarize key elements important to VI site characterization, provide the status and current understanding, and highlight data interpretation challenges, as well as innovative tools developed to help overcome the challenges. Although there have been significant advances in the understanding of VI in the past 20 years, limitations and knowledge gaps in screening, investigation methods, and modeling approaches still exist. Potential areas for further research include improved initial screening methods that account for the site-specific role of barriers, improved understanding of preferential pathways, and systematic study of buildings and infrastructure other than single-family residences.

Monitoring human genotoxicity risk associated to urban and industrial Buenos Aires air pollution exposure

The quality of life in large megacities is directly affected by its air quality. In urban environments, suspended particles from anthropogenic origin is one of the main air contaminants identified as highly genotoxic, mutagenic, or carcinogenic. Atmospheric monitoring is therefore imperative, and bioassays to detect the effects of genotoxic agents give usually excellent results. Analysis of micronucleus (MN) in exfoliated oral mucosa cells is a sensitive non-invasive method for monitoring genetic damage in human populations. The first aim of this study was to analyze and characterize levels of volatile organic compounds (VOCs), particulate matter (PM), and polycyclic aromatic hydrocarbons (PAHs) in two areas from Buenos Aires: La Plata city, an urban (U) area and Ensenada, an industrial (I) area. Secondly, we evaluated the possible health risk of its inhabitants through a simple genotoxic assay on exfoliated oral mucosa cells. Whole blood cell count and nuclear abnormalities frequencies were evaluated in the exfoliated oral mucosa cells from urban and industrial inhabitants. Smoking habit represented a significant factor increasing MN percentage while, age did not increase the production of any of the nuclear aberrations assayed (micronuclei, binucleated, karyorrhexis) when the inhabitants from the urban and the industrial areas were compared. In addition, changes in MN and binucleated cell percentages in males and females were found to be area-dependent. We suggest that regardless PM concentration, PM-specific characteristics (size, shape, chemical elements, etc.) and VOCs levels could be responsible for the different harmful genotoxic effects seen in the two areas. Although this is a preliminary study, our results allowed to recognize that individuals living in both the urban and the industrial areas could be considered susceptible groups and should periodically undergo biological monitoring and appropriate care.

Shotgun Metagenomics of Gut Microbiota in Humans with up to Extreme Longevity and the Increasing Role of Xenobiotic Degradation

The gut microbiome of long-lived people display an increasing abundance of subdominant species, as well as a rearrangement in health-associated bacteria, but less is known about microbiome functions. In order to disentangle the contribution of the gut microbiome to the complex trait of human longevity, we here describe the metagenomic change of the human gut microbiome along with aging in subjects with up to extreme longevity, including centenarians (aged 99 to 104 years) and semisupercentenarians (aged 105 to 109 years), i.e., demographically very uncommon subjects who reach the extreme limit of the human life span. According to our findings, the gut microbiome of centenarians and semisupercentenarians is more suited for xenobiotic degradation and shows a rearrangement in metabolic pathways related to carbohydrate, amino acid, and lipid metabolism. Collectively, our data go beyond the relationship between intestinal bacteria and physiological changes that occur with aging by detailing the shifts in the potential metagenomic functions of the gut microbiome of centenarians and semisupercentenarians as a response to progressive dietary and lifestyle modifications.IMPORTANCE The study of longevity may help us understand how human beings can delay or survive the most frequent age-related diseases and morbidities. In this scenario, the gut microbiome has been proposed as one of the variables to monitor and possibly support healthy aging. Indeed, the disruption of host-gut microbiome homeostasis has been associated with inflammation and intestinal permeability as well as a general decline in bone and cognitive health. Here, we performed a metagenomic assessment of fecal samples from semisupercentenarians, i.e., 105 to 109 years old, in comparison to young adults, the elderly, and centenarians, shedding light on the longest compositional and functional trajectory of the human gut microbiome with aging. In addition to providing a fine taxonomic resolution down to the species level, our study emphasizes the progressive age-related increase in degradation pathways of pervasive xenobiotics in Western societies, possibly as a result of a supportive process within the molecular continuum characterizing aging.

Analysis of benzene air quality standards, monitoring methods and concentrations in indoor and outdoor environment

Benzene is a proven carcinogen. Its synergistic action with other pollutants can damage different components of the biosphere. Literature comparing the air quality standards of benzene, its monitoring methods and global concentrations are sparse. This study compiles the worldwide available air quality standards for benzene and highlights the importance of strict and uniform standards all over the world. It was found that out of the 193 United Nation member states, only 53 countries, including the European Union member states, have ambient air quality standard for benzene. Even where standards were available, in most cases, they were not protective of public health. An extensive literature review was conducted to compile the available monitoring and analysis methods for benzene, and found that the most preferred method, i.e, analyzing by Gas Chromatography and Mass spectroscopy is not cost effective and not suitable for real-time continuous monitoring. The study compared the concentrations of benzene in the indoor and outdoor air reported from different countries. Though the higher concentrations of benzene noticed in the survey were mostly from Asian countries, both in the case of indoor and outdoor air, the concentrations were not statistically different across the various continents. Based on the analyzed data, the average benzene level in the ambient air of Asian countries (371 μg/m3) was approximately 3.5 times higher than the indoor benzene levels (111 μg/m3). Similarly, the outdoor to the indoor ratio of benzene level in European and North American Countries were found to be 1.2 and 7.7, respectively. This compilation will help the policymakers to include/revise the standards for benzene in future air quality guideline amendments.

Spatiotemporal variations and characterization of the chronic cancer risk associated with benzene exposure

A spatiotemporal analysis of benzene was performed in east of the USA and in a representative station in Baltimore County, in order to assess its trend over a 25-year time span between 1993 and 2018. A novel time series analysis technique known as TBATS (an ensemble of Trigonometric seasonal models, Box-Cox transformation, ARMA error plus Trend and Seasonal components) was applied for the first time on an air contaminant. The results demonstrated an annual seasonality and a continuously declining trend in this respect. The success of Reformulated Gasoline Program (RFG), initiated in 1995, was obviously detected in time series data since the daily benzene concentrations reduced to one-sixth of its original level in 1995. In this regard, the respective values of mean absolute scaled error (MASE) were 0.35 and 0.45 for training and test series. Given the observed concentrations of benzene, the hot spot areas in east of the US were identified by spatial analysis, as well. A chronic cancer risk was followed along the study area, by both a deterministic and probabilistic risk assessment (PRA) techniques. It was indicated that children are at higher risk than that of adults. The range of estimated risk values for PRA was higher and varied between 6.45 × 10^-6 and 1.68 × 10^-4 for adults and between 8.13 × 10^-6 and 8.29 × 10^-4 for children. According to the findings of PRA, and referring to the threshold level of 1 × 10^-4, only 1.2% of the adults and 28.77% of the children were categorized in an immediate risk group.

A comprehensive study on spatio-temporal distribution, health risk assessment and ozone formation potential of BTEX emissions in ambient air of Delhi, India

The hazardous air pollutants like benzene, toluene, ethylbenzene and xylene (BTEX) are considered as toxic because of their role in ozone formation and adverse effects on human health. Owing to this, the present study was carried out at six spatially distributed sites in Delhi from November 2017- June 2018. Activated charcoal tubes were used to collect samples of BTEX and were further analyzed using GC-FID. The minimum BTEX concentration was found at institutional site (9.94 μg/m³) and maximum at roadside site (103.12 μg/m³) with the average of 46.66 μg/m³. Also, the levels of BTEX were 1.18-1.74 times higher during rush hours as compared to non-rush hours. The high T/B ratio (2.26-3.41) observed is the indication of the traffic-originated sources of emission. The cancer risks calculated for benzene at probability 0.50 ranged as 1.29E-06 - 1.80E-05, whereas 4.09E-06 - 3.40E-05 at probability 0.95, which were higher than the acceptable value of 1.0E-06. The non-cancer health risks in terms of hazard index were observed less than unity i.e. within acceptable limit. The total ozone formation potential (OFP) was obtained as 207.51 ± 123.40 μg/m³ with maximum potential by toluene. Such high levels of BTEX, cancer risks and OFP obtained in the study especially at roadside and connectivity hub are harmful for people residing near these areas, and also to large commuters, who are exposed to such emissions during travelling.

Comparative study of tear lipid composition in two human populations with different exposure to particulate matter in La Plata, Argentina

To identify the changes in the lipid profile of the tear film in two human populations exposed to different levels of particulate material, and its relationship with dry eye, by gas chromatography with mass spectrometry (GC-MS) detection. A panel study involving 78 volunteers, who live and work in two locations in Argentina with different pollution levels: urban zone (n = 44) and industrial zone (n = 34). We measured the mean levels of particulate matter (PM) exposure. The tear samples were analyze by gas GC-MS detection and the dry eye was diagnose using Schirmer test, fluorescein breakup time, vital staining with fluorescein and lissamine green, and lid parallel conjunctival folds (LIPCOF). Statistical analysis was performed using Chi-Square, Bartlett's, Mann-Whitney tests, and Multiple Correspondence Analysis. PM₁₀ level was significantly higher in industrial zone than in urban area (p < 0.05). Subjects exposed to higher levels of PM₁₀ in outdoor air presented more presence of fatty acids (FA) of long chain, a higher proportion of saturated fatty acids (SFA), and lower unsaturated fatty acids (UFA), showing a differentiated profile, which may be associated with a PM level. The incidence of dry eye was greater in the industrial zone (p < 0.001), showing in both populations for this pathology higher FA ω-6 levels, which are responsible for the inflammation process. The lipid profile in populations exposed to higher levels of PM₁₀, like the industrial zone, shows a differentiated profile of FA and more incidence of dry eye with higher FA ω-6 levels, which are responsible for the inflammation process.

VOCs Measurements in Residential Buildings: Quantification via Thermal Desorption and Assessment of Indoor Concentrations in a Case-Study

Volatile organic compounds (VOCs) represent one of the most important categories of pollutants, influencing the air quality and human health and well-being in indoor environments. In the present study, 12 selected VOCs were sampled using Tenax TA tubes and analyzed by thermal desorption combined with gas chromatography and a flame ionization detector (TD-GC-FID). The TD-GC-FID method was optimized to obtain the separation of all the analytical peaks (including m- and p-xylene) and a satisfactory sensitivity, with low detection (between 0.14 and 0.31 ng) and quantification (between 0.47 and 1.02 ng) limits. The whole procedure was firstly assessed with the analysis of four co-located tubes exposed at an outdoor monitoring site, with results that revealed a very low inter-tubes variability (relative standard deviations of parallel measurements <5%). Then, the measurement protocol was used to quantify the indoor concentrations of the target VOCs in nine different homes during the dishwasher washing cycle. The most abundant detected VOC in all dwellings was d-limonene (mean: 231 µg/m3; maximum: 611 µg/m3). All the other compounds were monitored at concentration levels one or two orders of magnitude lower than d-limonene, and were generally comparable with those found in the scientific literature. In terms of health concerns, the measured concentrations were always well below the safe levels established for the protection of the general population in living environments.

An Integrated Method for Factor Number Selection of PMF Model: Case Study on Source Apportionment of Ambient Volatile Organic Compounds in Wuhan

The positive matrix factorization (PMF) model is widely used for source apportionment of volatile organic compounds (VOCs). The question about how to select the proper number of factors, however, is rarely studied. In this study, an integrated method to determine the most appropriate number of sources was developed and its application was demonstrated by case study in Wuhan. The concentrations of 103 ambient volatile organic compounds (VOCs) were measured intensively using online gas chromatography/mass spectrometry (GC/MS) during spring 2014 in an urban residential area of Wuhan, China. During the measurement period, the average temperature was approximately 25 °C with very little domestic heating and cooling. The concentrations of the most abundant VOCs (ethane, ethylene, propane, acetylene, n-butane, benzene, and toluene) in Wuhan were comparable to other studies in urban areas in China and other countries. The newly developed integrated method to determine the most appropriate number of sources is in combination of a fixed minimum threshold value for the correlation coefficient, the average weighted correlation coefficient of each species, and the normalized minimum error. Seven sources were identified by using the integrated method, and they were vehicular emissions (45.4%), industrial emissions (22.5%), combustion of coal (14.7%), liquefied petroleum gas (LPG) (9.7%), industrial solvents (4.4%), and pesticides (3.3%) and refrigerants. The orientations of emission sources have been characterized taking into account the frequency of wind directions and contributions of sources in each wind direction for the measurement period. It has been concluded that the vehicle exhaust contribution is greater than 40% distributed in all directions, whereas industrial emissions are mainly attributed to the west southwest and south southwest.

Volatile Organic Compounds in Air: Sources, Distribution, Exposure and Associated Illnesses in Children

BACKGROUND

Toxic volatile organic compounds (VOC), like benzene, toluene, ethylbenzene and xylenes (BTEX), are atmospheric pollutants representing a threat to human health. They are released into the environment from mobile sources in urban settings, but newly polluted areas are gaining importance in countries where accelerated industrialization is taking place in suburban or rural settings.

METHODS

The review includes studies done in Mexico and Latin-America and countries considered to have emerging economies and are compared with similar studies in developed countries. Data about environmental VOC levels and exposure of children have been included. Also, information about health effects was reviewed. Articles were searched in PubMed and Scopus, and information was also obtained from the United States Environmental Protection Agency (EPA), the EPAs Integrated Risk Information System (IRIS-EPA) and state reports on air quality of Mexican cities.

RESULTS

VOC or BTEX levels reported in industrial and suburban areas were found to be higher due to the burning of fossil fuels and waste emission; whereas, in big cities, VOC emissions were mainly due to mobile sources. Even though TEX levels were under reference values, benzene was found at levels several times over this value in cities and even higher in industrial zones. Elevated VOC emissions were also reported in cities with industrial development in their peripheral rural areas.Public health relevance: Industrial activities have changed the way of life of small towns, which previously had no concern about environmental pollution and chemicals. No air monitoring is done in these places where toxic chemicals are released into rivers and the atmosphere. This work demonstrates the need for environmental monitors to protect human life in suburban and rural areas where industrial growth occurs without planning and ecological or health protection, compromising the health of new generations beginning in fetal development.

A review on activated carbon adsorption for volatile organic compounds (VOCs)

A number of control methods have been adopted for the removal of hazardous volatile organic compounds (VOCs) from gas streams, particularly adsorption processes which are considered more prominent in terms of feasibility, effectiveness as well as cost competence compared to other methods. In this study, most of the activated-carbon-based adsorbents are critically reviewed in terms of their advantages and limitations for VOC gas adsorption. The choice of adsorbent and process parameters depends mainly on the type of VOC used, its chemical and structural properties, in addition to the adsorbent’s characteristics. The review discusses in detail the application of fixed-bed adsorption systems. A computational simulation study using quantum-chemical conductor like screening model for real solvents is included in this review which determines the efficiency in describing and predicting the adsorption technique required for each process. This review offers a comprehensive discussion of the VOC adsorption techniques and their implementation for different applications.

Indoor and outdoor air concentrations of volatile organic compounds and NO2 in schools of urban, industrial and rural areas in Central-Southern Spain

Thirty two VOCs including alkanes, aromatic hydrocarbons, terpenes and carbonyl compounds together with NO₂ were investigated in a kindergarten classroom, a primary classroom and the playground in 18 schools located in rural areas, an urban area (Ciudad Real) and an industrial area (Puertollano) in the province of Ciudad Real in central southern Spain. The most abundant pollutants at schools were the aldehydes formaldehyde and hexanal. After carbonyls, n-dodecane was the most abundant compound in the study areas. The NO₂ concentrations were higher in the urban area, followed by industrial area and rural areas. For benzene, its concentration in the industrial area was significantly higher than in the urban and rural areas which reflects the magnitude of the contribution to the indoor air by petrochemical plant during the sampling period. Principal component analysis, indoor/outdoor ratios, multiple linear regressions and Spearman correlation coefficients were used to investigate the origin, the indoor pollutant determinants and to establish common sources between VOCs and NO₂. Seven components were extracted from the application of PCA to the indoor measurements accounting for 77.5% of the total variance. The analysis of indoor/outdoor ratios and correlations demonstrated that sources in the indoor environment are prevailing for most of the investigated VOCs. Benzene and n-pentane have a major relevance as outdoor sources, while aldehydes, terpenes, alkanes and most aromatic hydrocarbons as indoor sources. For NO₂, ethylbenzene and toluene both indoor and outdoor sources probably contributed to the measured concentrations. Finally, the results reported in this paper demonstrate that during the measuring period there were not great differences in the indoor air quality of the schools of the three study areas.

Characterization and cancer risk assessment of VOCs in home and school environments in gran La Plata, Argentina

Three areas are highlighted in Gran La Plata, Argentina: industrial, urban, and residential. In this work, the levels of volatile organic compounds (VOCs) in indoor air of homes and schools in those areas were analyzed, through the use of passive monitors. The study period is between 2007 and 2010. Higher levels of VOCs were found in homes and schools in the industrial zone, higher than the levels corresponding to urban and residential. Taking into account the relationship between indoor and outdoor levels of VOCs, they have ratios (I/O) between 1.5 and 10 are evidenced contributions of emission sources of VOCs both indoor and outdoor. Complementarily, we estimated the life time cancer risk (LCR) for benzene, styrene, trichloroethylene, and tetrachloroethylene in children who spend their time mostly in such indoor environments. The results show high LCR values for benzene, which exceed acceptable values for the US EPA.

Characteristics and health effects of BTEX in a hot spot for urban pollution

This study reports a spatiotemporal characterization of toluene, benzene, ethylbenzene, and xylenes concentrations (BTEX) in an urban hot spot in Iran, specifically at an bus terminal region in Shiraz. Sampling was carried out according to NIOSH Compendium Method 1501. The inverse distance weighting (IDW) method was applied for spatial mapping. The Monte Carlo simulation technique was applied to evaluate carcinogenic and non-carcinogenic risk owing to BTEX exposure. The highest average BTEX concentrations were observed for benzene in the morning (at 7:00-9:00 A.M. local time) (26.15 ± 17.65 µg/m³) and evening (at 6:00-8:00 P.M. local time) (34.44 ± 15.63 µg/m³). The benzene to toluene ratios in the morning and evening were 2.02 and 3.07, respectively. The main sources of BTEX were gas stations and a municipal solid waste transfer station. The inhalation lifetime cancer risk (LTCR) for benzene in the morning and evening were 1.96 × 10^-4 and 2.49 × 10^-4, respectively, which exceeds the recommended value by US EPA and WHO. The hazard quotient (HQ) of all these pollutants was less than 1. The results of this work have implications for public health near 'hot spots' such as IKBT where large populations are exposed to carcinogenic emissions.

Investigation of outdoor BTEX: Concentration, variations, sources, spatial distribution, and risk assessment

The aim of this study was to measure BTEX (benzene, toluene, ethylbenzene, and xylenes) concentrations in the ambient air of Tehran, the capital of Iran, and investigate their seasonal variations, probable sources, spatial mapping, and risk assessment. The concentrations of BTEX were measured using a continuous monitoring device installed in seven stations around the city. Spatial mapping procedure was conducted using the inverse distance weighting (IDW) method. Monte Carlo simulation was used to assess the carcinogenic and noncarcinogenic risks imposed by BTEX. The highest and lowest annual mean concentrations of toluene and ethylbenzene were recorded as 16.25 and 3.63 μg m(-3), respectively. The maximum (6.434) and minimum (3.209) toluene/benzene (T/B) ratio was observed in summer and winter, respectively. The spatial distribution of BTEX pollution indicated that the highest concentrations were found along the major roads because of heavy traffic. Spearman's rank correlation coefficients and concentration ratios showed that BTEX were produced by the multiemission sources. The mean of inhalation lifetime cancer risk (LTCR) for benzene was 3.93 × 10(-7), which is lower than the limits recommended by the United States Environmental Protection Agency (US EPA) and the World Health Organization (WHO). The hazard quotient (HQ), noncarcinogenic risk index, for all BTEX compounds was <1. The obtained results showed no threat of BTEX concentrations to human health. However, as the concentrations of BTEX will increase due to the rapid growth of vehicles and industrial activities, much effort is required to control and manage the levels of these compounds in the future.

The relationship between solvent use and BTEX concentrations in occupational environments

Indoor air quality is an increasing concern; it causes significant damage to health because it is recycled in confined environments for extended periods of time. Among the pollutants found in these environments, benzene, toluene, ethylbenzene, and xylenes (BTEX) are known for their potential toxic, mutagenic, and carcinogenic effects. This study monitored the BTEX concentrations in paint, carpentry, and varnish workplaces and evaluated the potential to cause adverse health effects on workers in these environments. Twenty samples were collected in workplaces, 20 samples were collected outside the area, and eight samples were taken of the products used. Samples were collected using coconut shell cartridges, and chemical analyses were performed by gas chromatography with mass spectrometry. Toluene presented higher indoor concentrations and indoor and outdoor ratios, indicating that the paint and varnish workplaces had significant BTEX sources. The highest benzene and toluene concentrations were obtained from the paint workshop, and higher concentrations of ethylbenzene and xylenes were obtained in the varnish workshop. The highest non-carcinogenic risks were obtained for m + p-xylenes in the varnish work place, and the second highest non-carcinogenic risk was also determined for the same workshop.

Measurement and health risk assessment of PM2.5, flame retardants, carbonyls and black carbon in indoor and outdoor air in kindergartens in Hong Kong

Indoor air pollution is closely related to children's health. Polybrominated diphenyl ethers (PBDEs) and dechlorane plus (DP) transmitted through indoor PM_2.5 and dust, along with carbonyl compounds and black carbon (BC) aerosol were analysed in five Hong Kong kindergartens. The results showed that 60% of the median PM_2.5 levels (1.3×10¹ to 2.9×10¹μg/m³ for indoor; 9.5 to 8.8×10¹μg/m³ for outdoor) in the five kindergartens were higher than the guidelines set by the World Health Organization (2.5×10¹μg/m³). Indoor PM_2.5 mass concentrations were correlated with outdoor PM_2.5 in four of the kindergartens. The PBDEs (0.10-0.64ng/m³ in PM_2.5; 0.30-2.0×10²ng/g in dust) and DP (0.05-0.10ng/m³ in PM_2.5; 1.3-8.7ng/g in dust) were detected in 100% of the PM_2.5 and dust samples. Fire retardant levels in the air were not correlated with the levels of dust in this study. The median BC concentrations varied by >7-fold from 8.8×10²ng/m^-3 to 6.7×10³ng/m^-3 and cooking events might have caused BC concentrations to rise both indoors and outdoors. The total concentrations of 16 carbonyls ranged from 4.7×10¹μg/m³ to 9.3×10¹μg/m³ indoors and from 1.9×10¹μg/m³ to 4.3×10¹μg/m³ outdoors, whilst formaldehyde was the most abundant air carbonyl. Indoor carbonyl concentrations were correlated with outdoor carbonyls in three kindergartens. The health risk assessment showed that hazard indexes (HIs) HIs of non-cancer risks from PBDEs and DPs were all lower than 0.08, whilst non-cancer HIs of carbonyl compounds ranged from 0.77 to 1.85 indoors and from 0.50 to 0.97 outdoors. The human intake of PBDEs and DP through inhalation of PM_2.5 accounted for 78% to 92% of the total intake. The cancer hazard quotients (HQs) of formaldehyde ranged from 4.5E-05 to 2.1E-04 indoors and from 1.9E-05 to 6.2E-05 outdoors. In general, the indoor air pollution in the five Hong Kong kindergartens might present adverse effects to children, although different schools showed distinct pollution levels, so indoor air quality might be improved through artificial measures. The data will be useful to developing a feasible management protocol for indoor environments.

The MERMAID study: indoor and outdoor average pollutant concentrations in 10 low-energy school buildings in France

Indoor air quality was characterized in 10 recently built energy-efficient French schools during two periods of 4.5 days. Carbon dioxide time-resolved measurements during occupancy clearly highlight the key role of the ventilation rate (scheduled or occupancy indexed), especially in this type of building, which was tightly sealed and equipped with a dual-flow ventilation system to provide air refreshment. Volatile organic compounds (VOCs) and inorganic gases (ozone and NO2 ) were measured indoors and outdoors by passive techniques during the occupied and the unoccupied periods. Over 150 VOC species were identified. Among them, 27 species were selected for quantification, based on their occurrence. High concentrations were found for acetone, 2-butanone, formaldehyde, toluene, and hexaldehyde. However, these concentrations are lower than those previously observed in conventional school buildings. The indoor/outdoor and unoccupied/occupied ratios are informative regarding emission sources. Except for benzene, ozone, and NO2 , all the pollutants in these buildings have an indoor source. Occupancy is associated with increased levels of acetone, 2-butanone, pentanal, butyl acetate, and alkanes.

Volatile organic compounds (VOCs) in surface coating materials: Their compositions and potential as an alternative fuel

A sampling system was designed to determine the composition ratios of VOCs emitted from 31 surface coating materials (SCMs). Representative architectural, automotive, and marine SCMs in Korea were investigated. Toluene, ethylbenzene, and xylene were the predominant VOCs. The VOC levels (wt%) from automotive SCMs were significantly higher than those from architectural and marine paints. It was found that target SCMs comprised mainly VOCs with 6-10 carbon atoms in molecules, which could be adsorbed by activated carbon. The saturated activated carbon which had already adsorbed toluene, ethylbenzene, and m-xylene was combusted. The saturated activated carbon was more combustible than new activated carbon because it comprised inflammable VOCs. Therefore, it could be an alternative fuel when using in a "fuelization system". To use the activated carbon as a fuel, a control technology of VOCs from a coating process was also designed and introduced.

An assessment of air quality reflecting the chemosensory irritation impact of mixtures of volatile organic compounds

We present a method to assess the air quality of an environment based on the chemosensory irritation impact of mixtures of volatile organic compounds (VOCs) present in such environment. We begin by approximating the sigmoid function that characterizes psychometric plots of probability of irritation detection (Q) versus VOC vapor concentration to a linear function. First, we apply an established equation that correlates and predicts human sensory irritation thresholds (SIT) (i.e., nasal and eye irritation) based on the transfer of the VOC from the gas phase to biophases, e.g., nasal mucus and tear film. Second, we expand the equation to include other biological data (e.g., odor detection thresholds) and to include further VOCs that act mainly by "specific" effects rather than by transfer (i.e., "physical") effects as defined in the article. Then we show that, for 72 VOCs in common, Q values based on our calculated SITs are consistent with the Threshold Limit Values (TLVs) listed for those same VOCs on the basis of sensory irritation by the American Conference of Governmental Industrial Hygienists (ACGIH). Third, we set two equations to calculate the probability (Qmix) that a given air sample containing a number of VOCs could elicit chemosensory irritation: one equation based on response addition (Qmix scale: 0.00 to 1.00) and the other based on dose addition (1000*Qmix scale: 0 to 2000). We further validate the applicability of our air quality assessment method by showing that both Qmix scales provide values consistent with the expected sensory irritation burden from VOC mixtures present in a wide variety of indoor and outdoor environments as reported on field studies in the literature. These scales take into account both the concentration of VOCs at a particular site and the propensity of the VOCs to evoke sensory irritation.

A systematic review of evidence and implications of spatial and seasonal variations of volatile organic compounds (VOC) in indoor human environments

Many volatile organic compounds (VOC) are classified as known or possible human carcinogens, irritants, and toxicants, and VOC exposure has been associated with asthma and other respiratory symptoms/diseases. This review summarizes recent quantitative data regarding VOC in four categories of indoor environments (schools, housing, offices, and other indoor) and compares the types and concentration levels of individual VOC that were detected, measured, and reported according to season (cold and warm). The influence of outdoor air on concentrations of indoor VOC was also assessed as ratios of indoor versus outdoor. Papers published from 2000 onward were reviewed and 1383 potentially relevant studies were identified. From these, 177 were removed after duplication, 1176 were excluded for not meeting the review criteria, and 40 were included in this review. On average, higher mean concentrations of indoor VOC were found in housing environments, in offices, and in the cold season. Volatile organic compounds are commonly present in indoor air and specific compounds, and their concentrations vary among indoor environments and seasons, indicating corresponding differences in sources (indoors and outdoors). Actions and policies to reduce VOC exposures, such as improved product labeling and consumer education, are recommended.

Process-specific emission characteristics of volatile organic compounds (VOCs) from petrochemical facilities in the Yangtze River Delta, China

Process-specific emission characteristics of volatile organic compounds (VOCs) from petrochemical facilities were investigated in the Yangtze River Delta, China. Source samples were collected from various process units in the petrochemical, basic chemical, and chlorinated chemical plants, and were measured using gas chromatography-mass spectrometry/flame ionization detection. The results showed that propane (19.9%), propene (11.7%), ethane (9.5%) and i-butane (9.2%) were the most abundant species in the petrochemical plant, with propene at much higher levels than in petrochemical profiles measured in other regions. Styrene (15.3%), toluene (10.3%) and 1,3-butadiene (7.5%) were the major species in the basic chemical industry, while halocarbons, especially dichloromethane (15.2%) and chloromethane (7.5%), were substantial in the chlorinated chemical plant. Composite profiles were calculated using a weight-average approach based on the VOC emission strength of various process units. Emission profiles for an entire petrochemical-related industry were found to be process-oriented and should be established considering the differences in VOC emissions from various manufacturing facilities. The VOC source reactivity and carcinogenic risk potential of each process unit were also calculated in this study, suggesting that process operations mainly producing alkenes should be targeted for possible controls with respect to reducing the ozone formation potential, while process units emitting 1,3-butadiene should be under priority control in terms of toxicity. This provides a basis for further measurements of process-specific VOC emissions from the entire petrochemical industry. Meanwhile, more representative samples should be collected to reduce the large uncertainties.

Levels and sources of volatile organic compounds including carbonyls in indoor air of homes of Puertollano, the most industrialized city in central Iberian Peninsula. Estimation of health risk

Twenty nine organic air pollutants including carbonyl compounds, alkanes, aromatic hydrocarbons and terpenes were measured in the indoor environment of different houses together with the corresponding outdoor measurements in Puertollano, the most industrialized city in central Iberian Peninsula. VOCs were sampled during 8 weeks using Radiello(®) passive samplers, and a questionnaire on potential VOCs sources was filled out by the occupants. The results show that formaldehyde and hexanal was the most abundant VOCs measured in indoor air, with a median concentration of 55.5 and 46.4μgm(-3), respectively followed by butanal (29.1μgm(-3)), acetone (28.4μgm(-3)) and acetaldehyde (21.4μgm(-3)). After carbonyls, n-dodecane (13.1μgm(-3)) and terpenes (α-pinene, 13.4μgm(-3) and limonene, 13.4μgm(-3)) were the compounds with higher median concentrations. The indoor/outdoor (I/O) ratios demonstrated that sources in the indoor environment are prevailing for most of the investigated VOCs especially for limonene, α-pinene, hexanal, formaldehyde, pentanal, acetaldehyde, o-xylene, n-dodecane and acetone with I/O ratio >6. Multiple linear regressions were applied to investigate the indoor VOC determinants and Spearman correlation coefficients were used to establish common sources between VOCs. Finally, the lifetime cancer risk associated to formaldehyde, acetaldehyde and benzene exposure was estimated and they varied from 7.8×10(-5) to 4.1×10(-4) for formaldehyde, from 8.6×10(-6) to 3.5×10(-5) for acetaldehyde and from 2.0×10(-6) to 1.5×10(-5) for benzene. For formaldehyde, the attributed risk in most sampled homes was two orders of magnitude higher than the one (10(-6)) proposed as acceptable by risk management bodies.

Compilation and analysis of types and concentrations of airborne chemicals measured in various indoor and outdoor human environments

The main purpose of this article is to summarize and illustrate the results of a literature search on the types, levels, relative concentrations, concentration spread of individual chemicals, and number of airborne compounds (mostly volatile organic compounds, VOCs) that have been found, measured, and reported both indoors and outdoors. Two broad categories of indoor environments are considered: (1) home/school, and (2) commercial spaces. Also, two categories of outdoor environments are considered: (1) non-industrial and (2) industrial (the latter represented by the vicinity of a pig farm and the vicinity of an oil refinery). The outcome is presented as a series of graphs and tables containing the following statistics: geometric mean, arithmetic mean, median, standard deviation, variance, standard error, interquartile distance, minimum value, maximum value, and number of data (data count) for the air concentration of each reported compound in a given environment. A Supplementary Table allows interested readers to match each single value included in this compilation with its corresponding original reference.

Volatile organic compound identification and characterization by PCA and mapping at a high-technology science park

High-technology industries have grown continuously in Taiwan and elsewhere in the world. Volatile organic compounds (VOCs) comprise the highest percentage of emissions in these industries. The objectives of this study were to identify VOC sources and to apportion their contributions by using a three-step approach. These included estimating concentration distributions, performing principal component analysis (PCA), and mapping concentration contours. The results showed that the dominant compound groups were aromatic and aliphatic compounds. The PCA resolved four emission sources: vehicular traffic, industrial solvents, waste water plants, and cleaning/degreasing agents. Spatial distributions showed that concentrations of vehicular traffic-related compounds (benzene and isooctane) were highest at the entrances to the science park, and strongly related to traffic volume, and that the emissions of industry-related compounds (xylene and ethylbenzene) were closest to the associated sources. This study provided an accurate, practical and efficient method of characterizing emission sources in an industrial complex.

Determination of volatile organic compounds and associated health risk assessment in residential homes and hostels within an academic institute, New Delhi

The purpose of this study was to investigate the concentrations of volatile organic compounds (VOCs) in different indoor microenvironments of residential homes and hostels in an academic institute, in New Delhi, during March-May 2011. Eleven VOCs (aromatic and halogenated) were assessed. Sampling and analytical procedure were based on National Institute for Occupational Safety and Health (NIOSH) standard method. The lifetime cancer and non-cancer risk were calculated for targeted VOCs using US Environmental Protection Agency guidelines. The mean concentrations of ∑ VOCs (sum of monitored VOCs) and individual VOC were found to be higher indoors as compared to outdoors at both types of premises. Indoor to outdoor (I/O) ratios of the targeted VOCs exceeded 1.0, suggesting the significant presence of indoor sources. Strong correlations between I/O concentrations of VOCs in the current study suggest the presence of common sources. Factor analysis (FA) was used for source evaluation separately at two premise types. The estimated lifetime cancer risks in the current study for all occupants at both premises exceeded 10(-6) .

Human health risk evaluation of selected VOC, SVOC and particulate emissions from scented candles

Airborne compounds in the indoor environment arise from a wide variety of sources such as environmental tobacco smoke, heating and cooking, construction materials as well as outdoor sources. To understand the contribution of scented candles to the indoor load of airborne substances and particulate matter, candle emission testing was undertaken in environmentally controlled small and large emission chambers. Candle emission rates, calculated on the basis of measured chamber concentrations of volatile and semi-volatile organic compounds (VOC, SVOC) and particulate matter (PM), were used to predict their respective indoor air concentrations in a standard EU-based dwelling using 2 models: the widely accepted ConsExpo 1-box inhalation model and the recently developed RIFM 2-box indoor air dispersion model. The output from both models has been used to estimate more realistic consumer exposure concentrations of specific chemicals and PM in candle emissions. Potential consumer health risks associated with the candle emissions were characterized by comparing the exposure concentrations with existing indoor or ambient air quality guidelines or, where not existent, to established toxicity thresholds. On the basis of this investigation it was concluded that under normal conditions of use scented candles do not pose known health risks to the consumer.

Improvement of health risk factors after reduction of VOC concentrations in industrial and urban areas

After reductions of fugitive and diffuse emissions by an industrial complex, a follow-up study was performed to determine the time variability of volatile organic compounds (VOCs) and the lifetime cancer risk (LCR). Passive samplers (3 M monitors) were placed outdoors (n = 179) and indoors (n = 75) in industrial, urban, and control areas for 4 weeks. Twenty-five compounds including n-alkanes, cycloalkanes, aromatics, chlorinated hydrocarbons, and terpenes were determined by GC/MS. The results show a significant decrease of all VOCs, especially in the industrial area and to a lesser extent in the urban area. The median outdoor concentration of benzene in the industrial area declined compared to the former study, around 85% and about 50% in the urban area, which in the past was strongly influenced by industrial emissions. Other carcinogenic compounds like styrene and tetrachloroethylene were reduced to approximately 60%. VOC concentrations in control areas remained nearly unchanged. According to the determined BTEX ratios and interspecies correlations, in contrast to the previous study, traffic was identified as the main emission source in the urban and control areas and showed an increased influence in the industrial area. The LCR, calculated for benzene, styrene, and tetrachloroethylene, shows a decrease of one order of magnitude in accordance to the decreased total VOC concentrations and is now acceptable according to values proposed by the World Health Organization.