Kinetic and X-ray structural studies of three mutant E. coli alkaline phosphatases: insights into the catalytic mechanism without the nucleophile Ser102

Study of the interaction between alkaline phosphatase and biomacromolecule substrates

Alkaline phosphatase (ALP) is a nonspecific phosphatase, and its interaction with substrates mainly depends on the recognition of phosphate groups on the substrate. Previous enzymatic research has focused mainly on the enzymatic reaction kinetics of the inorganic small molecule p-nitrophenol phosphate (pNPP) as a substrate, but its interaction with biomacromolecule substrates has not been reported. In current scientific research, ALP is often used for molecular cloning, such as removing the 5' termini of nucleic acids. However, no detailed reports on the interactions between ALP and these biomolecules have been published. We used microscale thermophoresis (MST) and isothermal titration calorimetry (ITC) experiments to investigate the affinity of mutant ALP (S102L) from Escherichia coli for biomacromolecule substrates, including double-stranded DNA (dsDNA) and phosphoproteins. We found that S102L ALP has a strong affinity for dsDNA and β-casein. For the first time, the affinity of ALP for the substrate phosphate monoester has been proven to be significantly affected by the nature of its R group (ROP). In summary, we have explained the key factors involved in the interaction between ALP and biomacromolecule substrates from the perspective of affinity, which provides guidance in better understanding ALP.

Structural and Functional Integration of Tissue-Nonspecific Alkaline Phosphatase Within the Alkaline Phosphatase Superfamily: Evolutionary Insights and Functional Implications

Phosphatases are enzymes that catalyze the hydrolysis of phosphate esters. They play critical roles in diverse biological processes such as extracellular nucleotide homeostasis, transport of molecules across membranes, intracellular signaling pathways, or vertebrate mineralization. Among them, tissue-nonspecific alkaline phosphatase (TNAP) is today increasingly studied, due to its ubiquitous expression and its ability to dephosphorylate a very broad range of substrates and participate in several different biological functions. For instance, TNAP hydrolyzes inorganic pyrophosphate (PPi) to allow skeletal and dental mineralization. Additionally, TNAP hydrolyzes pyridoxal phosphate to allow cellular pyridoxal uptake, and stimulate vitamin B6-dependent reactions. Furthermore, TNAP has been identified as a key enzyme in non-shivering adaptive thermogenesis, by dephosphorylating phosphocreatine in the mitochondrial creatine futile cycle. This latter recent discovery and others suggest that the list of substrates and functions of TNAP may be much longer than previously thought. In the present review, we sought to examine TNAP within the alkaline phosphatase (AP) superfamily, comparing its sequence, structure, and evolutionary trajectory. The AP superfamily, characterized by a conserved central folding motif of a mixed beta-sheet flanked by alpha-helices, includes six subfamilies: AP, arylsulfatases (ARS), ectonucleotide pyrophosphatases/phosphodiesterases (ENPP), phosphoglycerate mutases (PGM), phosphonoacetate hydrolases, and phosphopentomutases. Interestingly, TNAP and several ENPP family members appear to participate in the same metabolic pathways and functions. For instance, extra-skeletal mineralization in vertebrates is inhibited by ENPP1-mediated ATP hydrolysis into the mineralization inhibitor PPi, which is hydrolyzed by TNAP expressed in the skeleton. Better understanding how TNAP and other AP family members differ structurally will be very useful to clarify their complementary functions. Structurally, TNAP shares the conserved catalytic core with other AP superfamily members but has unique features affecting substrate specificity and activity. The review also aims to highlight the importance of oligomerization in enzyme stability and function, and the role of conserved metal ion coordination, particularly magnesium, in APs. By exploring the structural and functional diversity within the AP superfamily, and discussing to which extent its members exert redundant, complementary, or specific functions, this review illuminates the evolutionary pressures shaping these enzymes and their broad physiological roles, offering insights into TNAP's multifunctionality and its implications for health and disease.

Trickier than It Looks: Isomerization between Five- and Six-Coordinated Zinc in Heterometallic Li2Zn2 Molecule

This report describes the synthesis and characterization of two heterobimetallic Li-Zn coordination isomers [Li2Zn2(tbaoac)6] (tbaoac = tert-butyl acetoacetato) that have been isolated separately by the same stoichiometric reaction run in different organic solvents. The 6-coordinated zinc isomer (6-Zn) was synthesized in acetone with high yield, while the 5-coordinated one (5-Zn) was readily obtained from ethanol. The 5-Zn isomer has a low solubility in organic solvents such as alkanes and haloalkanes, while its 6-Zn counterpart exhibits a good solubility in almost all common solvents. Two isomeric molecules feature similar centrosymmetric tetranuclear cyclic assemblies, which are different in their arrangement of tbaoac ligands. While all ligands act as μ2-type in the structure of 5-Zn, the two tbaoac groups chelating Li appear as μ3-type in 6-Zn, thus providing an additional coordination for Zn ions. However, the real structural transformation between these isomers was shown to be more complex than simply making or breaking a couple of Zn-O bonds. X-ray single-crystal structure analysis, powder X-ray diffraction, multinuclear NMR, DART mass spectrometry, ICP-OES analysis, and TGA have been employed for the characterization of the isomers. The combination of powder X-ray diffraction and 1H NMR investigation revealed that 6-Zn isomer can be quantitatively transformed to 5-Zn in ethanol, while the reverse conversion instantly takes place in acetone.

Utility of protein-protein binding surfaces composed of anti-parallel alpha-helices and beta-sheets selected by phage display

Over the past 3 decades, a diverse collection of small protein domains have been used as scaffolds to generate general purpose protein-binding reagents using a variety of protein display and enrichment technologies. To expand the repertoire of scaffolds and protein surfaces that might serve this purpose, we have explored the utility of (i) a pair of anti-parallel alpha-helices in a small highly disulfide-bonded 4-helix bundle, the CC4 domain from reversion-inducing Cysteine-rich Protein with Kazal Motifs and (ii) a concave beta-sheet surface and two adjacent loops in the human FN3 domain, the scaffold for the widely used monobody platform. Using M13 phage display and next generation sequencing, we observe that, in both systems, libraries of ∼30 million variants contain binding proteins with affinities in the low μM range for baits corresponding to the extracellular domains of multiple mammalian proteins. CC4- and FN3-based binding proteins were fused to the N- and/or C-termini of Fc domains and used for immunostaining of transfected cells. Additionally, FN3-based binding proteins were inserted into VP1 of AAV to direct AAV infection to cells expressing a defined surface receptor. Finally, FN3-based binding proteins were inserted into the Pvc13 tail fiber protein of an extracellular contractile injection system particle to direct protein cargo delivery to cells expressing a defined surface receptor. These experiments support the utility of CC4 helices B and C and of FN3 beta-strands C, D, and F together with adjacent loops CD and FG as surfaces for engineering general purpose protein-binding reagents.

Effect of Aggregation and Molecular Size on the Ice Nucleation Efficiency of Proteins

Aerosol acts as ice-nucleating particles (INPs) by catalyzing the formation of ice crystals in clouds at temperatures above the homogeneous nucleation threshold (-38 °C). In this study, we show that the immersion mode ice nucleation efficiency of the environmentally relevant protein, ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO), occurs at temperatures between -6.8 and -31.6 °C. Further, we suggest that this range is controlled by the RuBisCO concentration and protein aggregation. The warmest median nucleation temperature (-7.9 ± 0.8 °C) was associated with the highest concentration of RuBisCO (2 × 10-1 mg mL-1) and large aggregates with a hydrodynamic diameter of ∼103 nm. We investigated four additional chemically and structurally diverse proteins, plus the tripeptide glutathione, and found that each of them was a less effective INP than RuBisCO. Ice nucleation efficiency of the proteins was independent of the size (molecular weight) for the five proteins investigated in this study. In contrast to previous work, increasing the concentration and degree of aggregation did not universally increase ice nucleation efficiency. RuBisCO was the exception to this generalization, although the underlying molecular mechanism determining why aggregated RuBisCO is such an effective INP remains elusive.

Essential Functional Interplay of the Catalytic Groups in Acid Phosphatase

The cooperative interplay between the functional devices of a preorganized active site is fundamental to enzyme catalysis. An in-depth understanding of this phenomenon is central to elucidating the remarkable efficiency of natural enzymes and provides an essential benchmark for enzyme design and engineering. Here, we study the functional interconnectedness of the catalytic nucleophile (His18) in an acid phosphatase by analyzing the consequences of its replacement with aspartate. We present crystallographic, biochemical, and computational evidence for a conserved mechanistic pathway via a phospho-enzyme intermediate on Asp18. Linear free-energy relationships for phosphoryl transfer from phosphomonoester substrates to His18/Asp18 provide evidence for the cooperative interplay between the nucleophilic and general-acid catalytic groups in the wild-type enzyme, and its substantial loss in the H18D variant. As an isolated factor of phosphatase efficiency, the advantage of a histidine compared to an aspartate nucleophile is ∼10⁴-fold. Cooperativity with the catalytic acid adds ≥10²-fold to that advantage. Empirical valence bond simulations of phosphoryl transfer from glucose 1-phosphate to His and Asp in the enzyme explain the loss of activity of the Asp18 enzyme through a combination of impaired substrate positioning in the Michaelis complex, as well as a shift from early to late protonation of the leaving group in the H18D variant. The evidence presented furthermore suggests that the cooperative nature of catalysis distinguishes the enzymatic reaction from the corresponding reaction in solution and is enabled by the electrostatic preorganization of the active site. Our results reveal sophisticated discrimination in multifunctional catalysis of a highly proficient phosphatase active site.

Protein Mass-Modulated Effects in Alkaline Phosphatase

Recent experimental studies engaging isotopically substituted protein (heavy protein) have revealed that many, but not all, enzymatic systems exhibit altered chemical steps in response to an altered mass. The results have been interpreted as femtosecond protein dynamics at the active site being linked (or not) to transition-state barrier crossing. An altered enzyme mass can influence several kinetic parameters (kcat, Km, and kchem) in amounts of ≤30% relative to light enzymes. An early report on deuterium-labeled Escherichia coli alkaline phosphatase (AP) showed an unusually large enzyme kinetic isotope effect on kcat. We examined steady-state and chemical step properties of native AP, [2H]AP, and [2H,13C,15N]AP to characterize the role of heavy enzyme protein dynamics in reactions catalyzed by AP. Both [2H]- and [2H,13C,15N]APs showed unaltered steady-state and single-turnover rate constants. These findings characterize AP as one of the enzymes in which mass-dependent catalytic site dynamics is dominated by reactant-linked atomic motions. Two catalytic site zinc ions activate the oxygen nucleophiles in the catalytic site of AP. The mass of the zinc ions is unchanged in light and heavy APs. They are essentially linked to catalysis and provide a possible explanation for the loss of linkage between catalysis and protein mass in these enzymes.

Development of fast and simple chromogenic methods for glucan phosphatases in-gel activity assays

Glucan phosphatases are essential for normal starch degradation in plants and glycogen metabolism in mammals. Here we develop two chromogenic methods for the detection of glucan phosphatase activity in situ after non denaturing poliacrylamide gel electrophoresis; one method uses pNPP and the second one applies BCIP/NBT. The assays are sensitive, fast, simple, reliable and cost-effective preventing the use of radioactive or fluorogenic compounds. Taking advantage of an efficient separation method combined with the reported assays it is possible to obtain information about oligomeric state of the active enzymes as well as to simultaneously detect glucan substrate binding and phosphatase activity.

Prediction of distal residue participation in enzyme catalysis

A scoring method for the prediction of catalytically important residues in enzyme structures is presented and used to examine the participation of distal residues in enzyme catalysis. Scores are based on the Partial Order Optimum Likelihood (POOL) machine learning method, using computed electrostatic properties, surface geometric features, and information obtained from the phylogenetic tree as input features. Predictions of distal residue participation in catalysis are compared with experimental kinetics data from the literature on variants of the featured enzymes; some additional kinetics measurements are reported for variants of Pseudomonas putida nitrile hydratase (ppNH) and for Escherichia coli alkaline phosphatase (AP). The multilayer active sites of P. putida nitrile hydratase and of human phosphoglucose isomerase are predicted by the POOL log ZP scores, as is the single-layer active site of P. putida ketosteroid isomerase. The log ZP score cutoff utilized here results in over-prediction of distal residue involvement in E. coli alkaline phosphatase. While fewer experimental data points are available for P. putida mandelate racemase and for human carbonic anhydrase II, the POOL log ZP scores properly predict the previously reported participation of distal residues.

Ground state destabilization by anionic nucleophiles contributes to the activity of phosphoryl transfer enzymes

Enhanced phosphate binding by phosphatases upon removal of their anionic nucleophiles suggests that these enzymes use ground state destabilization by anionic active site nucleophiles as part of their catalytic arsenal.

Enzymes stabilize transition states of reactions while limiting binding to ground states, as is generally required for any catalyst. Alkaline Phosphatase (AP) and other nonspecific phosphatases are some of Nature's most impressive catalysts, achieving preferential transition state over ground state stabilization of more than 10²²-fold while utilizing interactions with only the five atoms attached to the transferred phosphorus. We tested a model that AP achieves a portion of this preference by destabilizing ground state binding via charge repulsion between the anionic active site nucleophile, Ser102, and the negatively charged phosphate monoester substrate. Removal of the Ser102 alkoxide by mutation to glycine or alanine increases the observed P_i affinity by orders of magnitude at pH 8.0. To allow precise and quantitative comparisons, the ionic form of bound P_i was determined from pH dependencies of the binding of P_i and tungstate, a P_i analog lacking titratable protons over the pH range of 5–11, and from the ³¹P chemical shift of bound P_i. The results show that the P_i trianion binds with an exceptionally strong femtomolar affinity in the absence of Ser102, show that its binding is destabilized by ≥10⁸-fold by the Ser102 alkoxide, and provide direct evidence for ground state destabilization. Comparisons of X-ray crystal structures of AP with and without Ser102 reveal the same active site and P_i binding geometry upon removal of Ser102, suggesting that the destabilization does not result from a major structural rearrangement upon mutation of Ser102. Analogous P_i binding measurements with a protein tyrosine phosphatase suggest the generality of this ground state destabilization mechanism. Our results have uncovered an important contribution of anionic nucleophiles to phosphoryl transfer catalysis via ground state electrostatic destabilization and an enormous capacity of the AP active site for specific and strong recognition of the phosphoryl group in the transition state.

Enzymes use a variety of tools and strategies to enhance (catalyze) biological reactions; these include the use of general acids and bases, cofactors, and the employment of remote binding interactions to position substrates near reactive chemical groups. Phosphatases are some of Nature's best enzymes, affording exceptional rate enhancements to the biologically ubiquitous removal of a phosphate group from a substrate (dephosphorylation). The apparent challenge faced by nonspecific phosphatases is that their wide substrate specificity precludes the efficient use of remote binding interactions. Previous work suggested that phosphatases could use negatively charged chemical groups (anionic nucleophiles) at the active site to destabilize substrate binding without simultaneously destabilizing the transition state barrier—an elusive catalytic strategy known as preferential ground state destabilization. In this work, we test this ground state destabilization model of catalysis by removing the anionic active site nucleophile of alkaline phosphatase and observing the effects on the enzyme's affinity for a phosphate ligand. We find that alkaline phosphatase has an exceptionally strong affinity for phosphate, and provide clear evidence for ground state destabilization by the anionic active site nucleophile that, when present, forestalls substrate saturation and product inhibition, and enhances catalysis by at least a thousand fold.

Cellular function and molecular structure of ecto-nucleotidases

Ecto-nucleotidases play a pivotal role in purinergic signal transmission. They hydrolyze extracellular nucleotides and thus can control their availability at purinergic P2 receptors. They generate extracellular nucleosides for cellular reuptake and salvage via nucleoside transporters of the plasma membrane. The extracellular adenosine formed acts as an agonist of purinergic P1 receptors. They also can produce and hydrolyze extracellular inorganic pyrophosphate that is of major relevance in the control of bone mineralization. This review discusses and compares four major groups of ecto-nucleotidases: the ecto-nucleoside triphosphate diphosphohydrolases, ecto-5'-nucleotidase, ecto-nucleotide pyrophosphatase/phosphodiesterases, and alkaline phosphatases. Only recently and based on crystal structures, detailed information regarding the spatial structures and catalytic mechanisms has become available for members of these four ecto-nucleotidase families. This permits detailed predictions of their catalytic mechanisms and a comparison between the individual enzyme groups. The review focuses on the principal biochemical, cell biological, catalytic, and structural properties of the enzymes and provides brief reference to tissue distribution, and physiological and pathophysiological functions.

High-resolution analysis of Zn(2+) coordination in the alkaline phosphatase superfamily by EXAFS and x-ray crystallography

Comparisons among evolutionarily related enzymes offer opportunities to reveal how structural differences produce different catalytic activities. Two structurally related enzymes, Escherichia coli alkaline phosphatase (AP) and Xanthomonas axonopodis nucleotide pyrophosphatase/phosphodiesterase (NPP), have nearly identical binuclear Zn(2+) catalytic centers but show tremendous differential specificity for hydrolysis of phosphate monoesters or phosphate diesters. To determine if there are differences in Zn(2+) coordination in the two enzymes that might contribute to catalytic specificity, we analyzed both x-ray absorption spectroscopic and x-ray crystallographic data. We report a 1.29-Å crystal structure of AP with bound phosphate, allowing evaluation of interactions at the AP metal site with high resolution. To make systematic comparisons between AP and NPP, we measured zinc extended x-ray absorption fine structure for AP and NPP in the free-enzyme forms, with AMP and inorganic phosphate ground-state analogs and with vanadate transition-state analogs. These studies yielded average zinc-ligand distances in AP and NPP free-enzyme forms and ground-state analog forms that were identical within error, suggesting little difference in metal ion coordination among these forms. Upon binding of vanadate to both enzymes, small increases in average metal-ligand distances were observed, consistent with an increased coordination number. Slightly longer increases were observed in NPP relative to AP, which could arise from subtle rearrangements of the active site or differences in the geometry of the bound vanadyl species. Overall, the results suggest that the binuclear Zn(2+) catalytic site remains very similar between AP and NPP during the course of a reaction cycle.

Characterization of a monomeric heat-labile classical alkaline phosphatase from Anabaena sp. PCC7120

Alkaline phosphatases (APs), known inducible enzymes of the Pho regulon and poorly characterized in cyanobacteria, hydrolyze phosphomonoesters to produce inorganic phosphate (P(i)) during P(i) starvation. In this study, two predicted alkaline phosphatase genes in the genome of Anabaena sp. PCC 7120, all2843 and alr5291, were apparently induced during P(i) starvation. Sequence analysis showed that alr5291 encodes a protein that is an atypical alkaline phosphatase like other cyanobacteria PhoAs, but the protein encoded by all2843 is very similar to the classical PhoAs, such as Escherichia coli alkaline phosphatase (EAP). To date, there have been no reports about classical phoA in cyanobacterial genomes. The alkaline phosphatase AP(A), coded by all2843, is characterized as a metalloenzyme containing Mg2+ and Zn2+ with molar ratio of 1 : 2. Site-directed mutagenesis analysis indicated that, though the active center of AP(A) is highly conserved in comparison with EAP, differences do exist between AP(A) and EAP in metal ion coordination. Besides, biochemical analysis revealed that AP(A) is a monomeric protein and inactivated rapidly at 50 degrees C. These results suggest that AP(A) is the first monomeric heat-labile classical PhoA found in cyanobacteria.

Atomic details of near-transition state conformers for enzyme phosphoryl transfer revealed by MgF-3 rather than by phosphoranes

Prior evidence supporting the direct observation of phosphorane intermediates in enzymatic phosphoryl transfer reactions was based on the interpretation of electron density corresponding to trigonal species bridging the donor and acceptor atoms. Close examination of the crystalline state of beta-phosphoglucomutase, the archetypal phosphorane intermediate-containing enzyme, reveals that the trigonal species is not PO-3 , but is MgF-3 (trifluoromagnesate). Although MgF-3 complexes are transition state analogues rather than phosphoryl group transfer reaction intermediates, the presence of fluorine nuclei in near-transition state conformations offers new opportunities to explore the nature of the interactions, in particular the independent measures of local electrostatic and hydrogen-bonding distributions using 19F NMR. Measurements on three beta-PGM-MgF-3 -sugar phosphate complexes show a remarkable relationship between NMR chemical shifts, primary isotope shifts, NOEs, cross hydrogen bond F...H-N scalar couplings, and the atomic positions determined from the high-resolution crystal structure of the beta-PGM-MgF--3 -G6P complex. The measurements provide independent validation of the structural and isoelectronic MgF--3 model of near-transition state conformations.

Crystal structures of Leishmania mexicana phosphoglycerate mutase suggest a one-metal mechanism and a new enzyme subclass

The structures of Leishmania mexicana cofactor-independent phosphoglycerate mutase (Lm iPGAM) crystallised with the substrate 3-phosphoglycerate at high and low cobalt concentrations have been solved at 2.00- and 1.90-A resolutions. Both structures are very similar and the active site contains both 3-phosphoglycerate and 2-phosphoglycerate at equal occupancies (50%). Lm iPGAM co-crystallised with the product 2-phosphoglycerate yields the same structure. Two Co(2+) are coordinated within the active site with different geometries and affinities. The cobalt at the M1 site has a distorted octahedral geometry and is present at 100% occupancy. The M2-site Co(2+) binds with distorted tetrahedral geometry, with only partial occupancy, and coordinates with Ser75, the residue involved in phosphotransfer. When the M2 site is occupied, the side chain of Ser75 adopts a position that is unfavourable for catalysis, indicating that this site may not be occupied under physiological conditions and that catalysis may occur via a one-metal mechanism. The geometry of the M2 site suggests that it is possible for Ser75 to be activated for phosphotransfer by H-bonding to nearby residues rather than by metal coordination. The 16 active-site residues of Lm iPGAM are conserved in the Mn-dependent iPGAM from Bacillus stearothermophilus (33% overall sequence identity). However, Lm iPGAM has an inserted tyrosine (Tyr210) that causes the M2 site to diminish in size, consistent with its reduced metal affinity. Tyr210 is present in trypanosomatid and plant iPGAMs, but not in the enzymes from other organisms, indicating that there are two subclasses of iPGAMs.

Efficient catalytic promiscuity in an enzyme superfamily: an arylsulfatase shows a rate acceleration of 10(13) for phosphate monoester hydrolysis

We report a second catalytic activity of Pseudomonas aeruginosa arylsulfatase (PAS). Besides hydrolyzing sulfate monoesters, this enzyme catalyzes the hydrolysis of phosphate monoesters with multiple turnovers (>90), a k(cat) value of 0.023 s(-1), a K(M) value of 29 microM, and a kcat/K(M) ratio of 790 M(-1) s(-1) at pH 8.0. This corresponds to a remarkably high rate acceleration of 10(13) relative to the nonenzymatic hydrolysis [(k(cat)/K(M))/k(w)] and a transition-state binding constant (K(tx)) of 3.4 pM. Promiscuous phosphatase and original sulfatase activities only differ by a factor of 620 (measured by k(cat)), so the enzyme provides high accelerations for both reactions. The magnitudes and relative similarity of the kinetic parameters suggest that a functional switch from sulfatase to phosphatase activities is feasible, either by gene duplication or by direct evolution via an intermediate enzyme with dual specificity.

Improvement of student understanding of how kinetic data facilitates the determination of amino acid catalytic function through an alkaline phosphatase structure/mechanism bioinformatics exercise

Laboratory exercises, which utilize alkaline phosphatase as a model enzyme, have been developed and used extensively in undergraduate biochemistry courses to illustrate enzyme steady-state kinetics. A bioinformatics laboratory exercise for the biochemistry laboratory, which complements the traditional alkaline phosphatase kinetics exercise, was developed and implemented. In this exercise, students examine the structure of alkaline phosphatase using the free, on-line bioinformatics protein-modeling program Protein Explorer. Specifically, students examine the active site residues of alkaline phosphatase and propose functions for these residues. Furthermore, by examining the mechanism of alkaline phosphatase and by using the published kinetic data, students propose specific roles for several active-site residues. Paired t-test analysis of pre- versus postexercise assessment data shows that the completion of the exercise improves student's ability to use kinetic data correctly thereby determining a probable catalytic function for an active site amino acid.

Genetic and functional analyses of PptA, a phospho-form transferase targeting type IV pili in Neisseria gonorrhoeae

The PilE pilin subunit protein of Neisseria gonorrhoeae undergoes unique covalent modifications with phosphoethanolamine (PE) and phosphocholine (PC). The pilin phospho-form transferase A (PptA) protein, required for these modifications, shows sequence relatedness with and architectural similarities to lipopolysaccharide PE transferases. Here, we used regulated expression and mutagenesis as means to better define the relationships between PptA structure and function, as well as to probe the mechanisms by which other factors impact the system. We show here that pptA expression is coupled at the level of transcription to its distal gene, murF, in a division/cell wall gene operon and that PptA can act in a dose-dependent fashion in PilE phospho-form modification. Molecular modeling and site-directed mutagenesis provided the first direct evidence that PptA is a member of the alkaline phosphatase superfamily of metalloenzymes with similar metal-binding sites and conserved structural folds. Through phylogenetic analyses and sequence alignments, these conclusions were extended to include the lipopolysaccharide PE transferases, including members of the disparate Lpt6 subfamily, and the MdoB family of phosphoglycerol transferases. Each of these enzymes thus likely acts as a phospholipid head group transferase whose catalytic mechanism involves a trans-esterification step generating a protein-phospho-form ester intermediate. Coexpression of PptA with PilE in Pseudomonas aeruginosa resulted in high levels of PE modification but was not sufficient for PC modification. This and other findings show that PptA-associated PC modification is governed by as-yet-undefined ancillary factors unique to N. gonorrhoeae.

Crystal Structure of Alkaline Phosphatase from the Antarctic Bacterium TAB5

Alkaline phosphatases (APs) are non-specific phosphohydrolases that are widely used in molecular biology and diagnostics. We describe the structure of the cold active alkaline phosphatase from the Antarctic bacterium TAB5 (TAP). The fold and the active site geometry are conserved with the other AP structures, where the monomer has a large central beta-sheet enclosed by alpha-helices. The dimer interface of TAP is relatively small, and only a single loop from each monomer replaces the typical crown domain. The structure also has typical cold-adapted features; lack of disulfide bridges, low number of salt-bridges, and a loose dimer interface that completely lacks charged interactions. The dimer interface is more hydrophobic than that of the Escherichia coli AP and the interactions have tendency to pair with backbone atoms, which we propose to result from the cold adaptation of TAP. The structure contains two additional magnesium ions outside of the active site, which we believe to be involved in substrate binding as well as contributing to the local stability. The M4 site stabilises an interaction that anchors the substrate-coordinating R148. The M5 metal-binding site is in a region that stabilises metal coordination in the active site. In other APs the M5 binding area is supported by extensive salt-bridge stabilisation, as well as positively charged patches around the active site. We propose that these charges, and the TAP M5 binding, influence the release of the product phosphate and thus might influence the rate-determining step of the enzyme.

Effect of a T81A mutation at the subunit interface on catalytic properties of alkaline phosphatase from Escherichia coli

Although alkaline phosphatase (APase) from Escherichia coli crystallizes as a symmetric dimer, it displays deviations from Michaelis-Menten kinetics supported by a model describing a dimeric enzyme with conformationally and kinetically non-equivalent subunits. The proposed model, explaining the mechanism of substrate hydrolysis, encompasses a conformational change mediated by subunit interactions [S. Orhanović, M. Pavela-Vrancic, Eur. J. Biochem. 270 (2003) 4356-4364]. The significance of interactions at the subunit interface and the involvement of the beta-pleated sheet stretching from underneath the active site to the subunit surface, in the catalytic mechanism, has been probed by site-directed mutagenesis. The mutant APase, carrying alanine in place of Thr81, was analyzed in comparison to the wild-type protein. The T81A mutation, introduced at the subunit interface, significantly affected the protein kinetic properties, emphasizing the importance of subunit interactions in the catalytic process.

Trapping the tetrahedral intermediate in the alkaline phosphatase reaction by substitution of the active site serine with threonine

We report here the construction of a mutant version of Escherichia coli alkaline phosphatase (AP) in which the active site Ser was replaced by Thr (S102T), in order to investigate whether the enzyme can utilize Thr as the nucleophile and whether the rates of the critical steps in the mechanism are altered by the substitution. The mutant AP with Thr at position 102 exhibited an approximately 4000-fold decrease in k(cat) along with a small decrease in Km. The decrease in catalytic efficiency of approximately 2000-fold was a much smaller drop than that observed when Ala or Gly were substituted at position 102. The mechanism by which Thr can substitute for Ser in AP was further investigated by determining the X-ray structure of the S102T enzyme in the presence of the Pi (S102T_Pi), and after soaking the crystals with substrate (S102T_sub). In the S102T_Pi structure, the Pi was coordinated differently with its position shifted by 1.3 A compared to the structure of the wild-type enzyme in the presence of Pi. In the S102T_sub structure, a covalent Thr-Pi intermediate was observed, instead of the expected bound substrate. The stereochemistry of the phosphorus in the S102T_sub structure was inverted compared to the stereochemistry in the wild-type structure, as would be expected after the first step of a double in-line displacement mechanism. We conclude that the S102T mutation resulted in a shift in the rate-determining step in the mechanism allowing us to trap the covalent intermediate of the reaction in the crystal.

Investigation of Group 12 Metal Complexes with a Tridentate SNS Ligand by X-ray Crystallography and1H NMR Spectroscopy

Two series of zinc triad complexes containing the ligand 2,6-bis(methylthiomethyl)pyridine (L1) were synthesized and characterized by X-ray crystallography and solution-state 1H NMR spectroscopy. The distorted meridional octahedral M(L1)2(ClO4)2 series includes the first structurally characterized Zn(II) and Cd(II) complexes with N2(SR2)4 coordination spheres. Coordination of HgCl2 and ZnCl2 with 1 equiv of ligand afforded mononuclear, five-coordinate species Hg(L1)Cl2 and Zn(L1)Cl2, respectively, with distorted square-pyramidal and trigonal-bipyramidal geometries. With CdCl2, the dimeric [Cd(L1)Cl(mu-Cl)]2 complex was obtained. The distorted octahedral coordination geometry of each Cd(II) center in this complex is formed by one tridentate ligand, two bridging chloride ions, and one terminal chloride ion. NMR spectra indicate that the intermolecular ligand-exchange rate of [M(L1)2](2+) decreased in the order Cd(II) > Zn(II) > Hg(II). Slow intermolecular ligand-exchange conditions on the chemical-shift time scale were found for 1:2 metal-to-ligand complexes of L(1) with Hg(II) and Zn(II) but not Cd(II). Slow intermolecular ligand-exchange conditions in acetonitrile-d(3) solutions permitting detection of (3-5)J(199Hg1H) were found for 1:1 and 1:2 Hg(ClO4)2/L1 complexes, but not for the related Cd(ClO4)2) complexes. The magnitudes of J(199Hg1H) for equivalent protons were smaller in [Hg(L1)2](2+) than in [Hg(L1)(NCCH3)x](2+). The relative intermolecular ligand-exchange rates of the zinc triad complexes investigated here suggest that the toxicity of Hg(II) is accentuated by the relative difficulty of displacing it from the coordination sites encountered.

Binding site in eag voltage sensor accommodates a variety of ions and is accessible in closed channel

In ether-a-go-go K+ channels, voltage-dependent activation is modulated by ion binding to a site located in an extracellular-facing crevice between transmembrane segments S2 and S3 in the voltage sensor. We find that acidic residues D278 in S2 and D327 in S3 are able to coordinate a variety of divalent cations, including Mg2+, Mn2+, and Ni2+, which have qualitatively similar functional effects, but different half-maximal effective concentrations. Our data indicate that ions binding to individual voltage sensors in the tetrameric channel act without cooperativity to modulate activation gating. We have taken advantage of the unique phenotype of Ni2+ in the D274A channel, which contains a mutation of a nonbinding site residue, to demonstrate that ions can access the binding site from the extracellular solution when the voltage sensor is in the resting conformation. Our results are difficult to reconcile with the x-ray structure of the KvAP K+ channel, in which the binding site residues are widely separated, and with the hydrophobic paddle model for voltage-dependent activation, in which the voltage sensor domain, including the S3-S4 loop, is near the cytoplasmic side of the membrane in the closed channel.

Phosphate Diester Hydrolysis and DNA Damage Promoted by New cis-Aqua/Hydroxy Copper(II) Complexes Containing Tridentate Imidazole-rich Ligands

The tridentate Schiff base [(2-(imidazol-4-yl)ethyl)(1-methylimidazol-2-yl)methyl)imine (HISMIMI) and its reduced form HISMIMA were synthesized and characterized, as well their mononuclear cis-dihalo copper(II) complexes 1 and 2, respectively. In addition, the dinuclear [CuII(mu-OH)2CuII](2+) complexes (3) and (4) obtained from complexes 1 and 2, respectively, were also isolated and characterized by several physicochemical techniques, including magnetochemistry, electrochemistry, and EPR and UV-vis spectroscopies. The crystal structures of 1 and 2 were determined by X-ray crystallography and revealed two neutral complexes with their tridentate chelate ligands meridionally coordinated. Completing the coordination spheres of the square-pyramidal structures, a chloride ion occupies the apical position and another is bonded in the basal plane. In addition, complexes 1 and 2 were investigated by infrared, electronic, and EPR spectroscopies, cyclic voltammetry, and potentiometric equilibrium studies. The hydrolytic activity on phosphate diester cleavage of 1 and 2 was investigated utilizing 2,4-BDNPP as substrate. These experiments were carried out at 50 degrees C, and the data treatment was based on the Michaelis-Menten approach, giving the following kinetic parameters (complex 1/complex 2): vmax (mol L(-1) s(-1))=16.4x10(-9)/7.02x10(-9); KM (mol L(-1))=17.3x10(-3)/3.03x10(-3); kcat (s(-1))=3.28x10(-4)/1.40x10(-4). Complex 1 effectively promoted the hydrolytic cleavage of double-strand plasmid DNA under anaerobic and aerobic conditions, with a rate constant of 0.28 h(-1) for the decrease of form I, which represents about a 10(7) rate increase compared with the estimated uncatalyzed rate of hydrolysis.

Characterization of a monomeric Escherichia coli alkaline phosphatase formed upon a single amino acid substitution

Alkaline phosphatase (AP) from Escherichia coli as well as APs from many other organisms exist in a dimeric quaternary structure. Each monomer contains an active site located 32 A away from the active site in the second subunit. Indirect evidence has previously suggested that the monomeric form of AP is inactive. Molecular modeling studies indicated that destabilization of the dimeric interface should occur if Thr-59, located near the 2-fold axis of symmetry, were replaced by a sterically large and charged residue such as arginine. The T59R enzyme was constructed and characterized by sucrose-density gradient sedimentation, size-exclusion chromatography, and circular dichroism (CD) and compared with the previously constructed T59A enzyme. The T59A enzyme was found to exist as a dimer, whereas the T59R enzyme was found to exist as a monomer. The T59A, T59R, and wild-type APs exhibited almost identical secondary structures as judged by CD. The T59R monomeric AP has a melting temperature (Tm) of 43 degrees C, whereas the wild-type AP dimer has a Tm of 97 degrees C. The catalytic activity of the T59R enzyme was reduced by 104-fold, whereas the T59A enzyme exhibited an activity similar to that of the wild-type enzyme. The T59A and wild-type enzymes contained similar levels of zinc and magnesium, whereas the T59R enzyme has almost undetectable amounts of tightly bound metals. These results suggest that a significant conformational change occurs upon dimerization, which enhances thermal stability, metal binding, and catalysis.

Turnover-based in vitro selection and evolution of biocatalysts from a fully synthetic antibody library

This report describes the selection of highly efficient antibody catalysts by combining chemical selection from a synthetic library with directed in vitro protein evolution. Evolution started from a naive antibody library displayed on phage made from fully synthetic, antibody-encoding genes (the Human Combinatorial Antibody Library; HuCAL-scFv). HuCAL-scFv was screened by direct selection for catalytic antibodies exhibiting phosphatase turnover. The substrate used was an aryl phosphate, which is spontaneously transformed into an electrophilic trapping reagent after cleavage. Chemical selection identified an efficient biocatalyst that then served as a template for error-prone PCR (epPCR) to generate randomized repertoires that were subjected to further selection cycles. The resulting superior catalysts displayed cumulative mutations throughout the protein sequence; the ten-fold improvement of their catalytic proficiencies (>10(10) M(-1)) resulted from increased kcat values, thus demonstrating direct selection for turnover. The strategy described here makes the search for new catalysts independent of the immune system and the antibody framework.

Insights into the catalytic mechanism of cofactor-independent phosphoglycerate mutase from X-ray crystallography, simulated dynamics and molecular modeling

Phosphoglycerate mutases catalyze the isomerization of 2 and 3-phosphoglycerates, and are essential for glucose metabolism in most organisms. Here, we further characterize the 2,3-bisphosphoglycerate-independent phosphoglycerate mutase (iPGM) from Bacillus stearothermophilus by determination of a high-resolution (1.4A) crystal structure of the wild-type enzyme and the crystal structure of its S62A mutant. The mutant structure surprisingly showed the replacement of one of the two catalytically essential manganese ions with a water molecule, offering an additional possible explanation for its lack of catalytic activity. Crystal structures invariably show substrate phosphoglycerate to be entirely buried in a deep cleft between the two iPGM domains. Flexibility analyses were therefore employed to reveal the likely route of substrate access to the catalytic site through an aperture created in the enzyme's surface during certain stages of the catalytic process. Several conserved residues lining this aperture may contribute to orientation of the substrate as it enters. Factors responsible for the retention of glycerate within the phosphoenzyme structure in the proposed mechanism are identified by molecular modeling of the glycerate complex of the phosphoenzyme. Taken together, these results allow for a better understanding of the mechanism of action of iPGMs. Many of the results are relevant to a series of evolutionarily related enzymes. These studies will facilitate the development of iPGM inhibitors which, due to the demonstrated importance of this enzyme in many bacteria, would be of great potential clinical significance.

The 1.9 A crystal structure of heat-labile shrimp alkaline phosphatase

Alkaline phosphatases are non-specific phosphomonoesterases that are distributed widely in species ranging from bacteria to man. This study has concentrated on the tissue-nonspecific alkaline phosphatase from arctic shrimps (shrimp alkaline phosphatase, SAP). Originating from a cold-active species, SAP is thermolabile and is used widely in vitro, e.g. to dephosphorylate DNA or dNTPs, since it can be inactivated by a short rise in temperature. Since alkaline phosphatases are zinc-containing enzymes, a multiwavelength anomalous dispersion (MAD) experiment was performed on the zinc K edge, which led to the determination of the structure to a resolution of 1.9 A. Anomalous data clearly showed the presence of a zinc triad in the active site, whereas alkaline phosphatases usually contain two zinc and one magnesium ion per monomer. SAP shares the core, an extended beta-sheet flanked by alpha-helices, and a metal triad with the currently known alkaline phosphatase structures (Escherichia coli structures and a human placental structure). Although SAP lacks some features specific for the mammalian enzyme, their backbones are very similar and may therefore be typical for other higher organisms. Furthermore, SAP possesses a striking feature that the other structures lack: surface potential representations show that the enzyme's net charge of -80 is distributed such that the surface is predominantly negatively charged, except for the positively charged active site. The negatively charged substrate must therefore be directed strongly towards the active site. It is generally accepted that optimization of the electrostatics is one of the characteristics related to cold-adaptation. SAP demonstrates this principle very clearly.

Alkaline phosphatase revisited: hydrolysis of alkyl phosphates

Escherichia coli alkaline phosphatase (AP) is the prototypical two metal ion catalyst with two divalent zinc ions bound approximately 4 A apart in the active site. Studies spanning half a century have elucidated many structural and mechanistic features of this enzyme, rendering it an attractive model for investigating the potent catalytic power of bimetallic centers. Unfortunately, fundamental mechanistic features have been obscured by limitations with the standard assays. These assays generate concentrations of inorganic phosphate (P(i)) in excess of its inhibition constant (K(i) approximately 1 muM). This tight binding by P(i) has affected the majority of published kinetic constants. Furthermore, binding limits k(cat)/K(m) for reaction of p-nitrophenyl phosphate, the most commonly employed substrate. We describe a sensitive (32)P-based assay for hydrolysis of alkyl phosphates that avoids the complication of product inhibition. We have revisited basic mechanistic features of AP with these alkyl phosphate substrates. The results suggest that the chemical step for phosphorylation of the enzyme limits k(cat)/K(m). The pH-rate profile and additional results suggest that the serine nucleophile is active in its anionic form and has a pK(a) of < or = 5.5 in the free enzyme. An inactivating pK(a) of 8.0 is observed for binding of both substrates and inhibitors, and we suggest that this corresponds to ionization of a zinc-coordinated water molecule. Counter to previous suggestions, inorganic phosphate dianion appears to bind to the highly charged AP active site at least as strongly as the trianion. The dependence of k(cat)/K(m) on the pK(a) of the leaving group follows a Brønsted correlation with a slope of beta(lg) = -0.85 +/- 0.1, differing substantially from the previously reported value of -0.2 obtained from data with a less sensitive assay. This steep leaving group dependence is consistent with a largely dissociative transition state for AP-catalyzed hydrolysis of phosphate monoesters. The new (32)P-based assay employed herein will facilitate continued dissection of the AP reaction by providing a means to readily follow the chemical step for phosphorylation of the enzyme.

Artificial evolution of an enzyme active site: structural studies of three highly active mutants of Escherichia coli alkaline phosphatase

The crystal structure of three mutants of Escherichia coli alkaline phosphatase with catalytic activity (k(cat)) enhancement as compare to the wild-type enzyme is described in different states. The biological aspects of this study have been reported elsewhere. The structure of the first mutant, D330N, which is threefold more active than the wild-type enzyme, was determined with phosphate in the active site, or with aluminium fluoride, which mimics the transition state. These structures reveal, in particular, that this first mutation does not alter the active site. The second mutant, D153H-D330N, is 17-fold more active than the wild-type enzyme and activated by magnesium, but its activity drops after few days. The structure of this mutant was solved under four different conditions. The phosphate-free enzyme was studied in an inactivated form with zinc at site M3, or after activation by magnesium. The comparison of these two forms free of phosphate illustrates the mechanism of the magnesium activation of the catalytic serine residue. In the presence of magnesium, the structure was determined with phosphate, or aluminium fluoride. The drop in activity of the mutant D153H-D330N could be explained by the instability of the metal ion at M3. The analysis of this mutant helped in the design of the third mutant, D153G-D330N. This mutant is up to 40-fold more active than the wild-type enzyme, with a restored robustness of the enzyme stability. The structure is presented here with covalently bound phosphate in the active site, representing the first phosphoseryl intermediate of a highly active alkaline phosphatase. This study shows how structural analysis may help to progress in the improvement of an enzyme catalytic activity (k(cat)), and explains the structural events associated with this artificial evolution.

Primary structure of cold-adapted alkaline phosphatase from a Vibrio sp. as deduced from the nucleotide gene sequence

Alkaline phosphatases (AP) are widely distributed in nature, and generally have a dimeric structure. However, there are indications that either monomeric or multimeric bacterial forms may exist. This paper describes the gene sequence of a psychrophilic marine Vibrio AP, previously shown to be particularly heat labile. The kinetic properties were also indicative of cold adaptation. The amino acid sequence of the Vibrio G15-21 AP reveals that the residues involved in the catalytic mechanism, including those ligating the metal ions, have precedence in other characterized APs. Compared with Escherichia coli AP, the two zinc binding sites are identical, whereas the metal binding site, normally occupied by magnesium, is not. Asp-153 and Lys-328 of E. coli AP are His-153 and Trp-328 in Vibrio AP. Two additional stretches of amino acids not present in E. coli AP are found inserted close to the active site of the Vibrio AP. The smaller insert could be accommodated within a dimeric structure, assuming a tertiary structure similar to E. coli AP. In contrast the longer insert would most likely protrude into the interface area, thus preventing dimer formation. This is the first primary structure of a putative monomeric AP, with indications as to the basis for a monomeric existence. Proximity of the large insert loop to the active site may indicate a surrogate role for the second monomer, and may also shape the catalytic as well as stability characteristics of this enzyme.

Functional interrelationships in the alkaline phosphatase superfamily: phosphodiesterase activity of Escherichia coli alkaline phosphatase

Escherichia coli alkaline phosphatase (AP) is a proficient phosphomonoesterase with two Zn(2+) ions in its active site. Sequence homology suggests a distant evolutionary relationship between AP and alkaline phosphodiesterase/nucleotide pyrophosphatase, with conservation of the catalytic metal ions. Furthermore, many other phosphodiesterases, although not evolutionarily related, have a similar active site configuration of divalent metal ions in their active sites. These observations led us to test whether AP could also catalyze the hydrolysis of phosphate diesters. The results described herein demonstrate that AP does have phosphodiesterase activity: the phosphatase and phosphodiesterase activities copurify over several steps; inorganic phosphate, a strong competitive inhibitor of AP, inhibits the phosphodiesterase and phosphatase activities with the same inhibition constant; a point mutation that weakens phosphate binding to AP correspondingly weakens phosphate inhibition of the phosphodiesterase activity; and mutation of active site residues substantially reduces both the mono- and diesterase activities. AP accelerates the rate of phosphate diester hydrolysis by 10(11)-fold relative to the rate of the uncatalyzed reaction [(k(cat)/K(m))/k(w)]. Although this rate enhancement is substantial, it is at least 10(6)-fold less than the rate enhancement for AP-catalyzed phosphate monoester hydrolysis. Mutational analysis suggests that common active site features contribute to hydrolysis of both phosphate monoesters and phosphate diesters. However, mutation of the active site arginine to serine, R166S, decreases the monoesterase activity but not the diesterase activity, suggesting that the interaction of this arginine with the nonbridging oxygen(s) of the phosphate monoester substrate provides a substantial amount of the preferential hydrolysis of phosphate monoesters. The observation of phosphodiesterase activity extends the previous observation that AP has a low level of sulfatase activity, further establishing the functional interrelationships among the sulfatases, phosphatases, and phosphodiesterases within the evolutionarily related AP superfamily. The catalytic promiscuity of AP could have facilitated divergent evolution via gene duplication by providing a selective advantage upon which natural selection could have acted.

Structural and catalytic similarities between nucleotide pyrophosphatases/phosphodiesterases and alkaline phosphatases

Nucleotide pyrophosphatases/phosphodiesterases (NPPs) generate nucleoside 5'-monophosphates from a variety of nucleotides and their derivatives. Here we show by data base analysis that these enzymes are conserved from eubacteria to higher eukaryotes. We also provide evidence for the existence of two additional members of the mammalian family of ecto-NPPs. Homology searches and alignment-assisted mutagenesis revealed that the catalytic core of NPPs assumes a fold similar to that of a superfamily of phospho-/sulfo-coordinating metalloenzymes comprising alkaline phosphatases, phosphoglycerate mutases, and arysulfatases. Mutation of mouse NPP1 in some of its predicted metal-coordinating residues (D358N or H362Q) or in the catalytic site threonine (T238S) resulted in an enzyme that could still form the nucleotidylated catalytic intermediate but was hampered in the second step of catalysis. We also obtained data indicating that the ability of some mammalian NPPs to auto(de)phosphorylate is due to an intrinsic phosphatase activity, whereby the enzyme phosphorylated on Thr-238 represents the covalent intermediate of the phosphatase reaction. The results of site-directed mutagenesis suggested that the nucleotide pyrophosphatase/phosphodiesterase and the phosphatase activities of NPPs are mediated by a single catalytic site.

Mg(2+) modulates voltage-dependent activation in ether-à-go-go potassium channels by binding between transmembrane segments S2 and S3

Extracellular Mg(2+) directly modulates voltage-dependent activation in ether-à-go-go (eag) potassium channels, slowing the kinetics of ionic and gating currents (Tang, C.-Y., F. Bezanilla, and D.M. Papazian. 2000. J. Gen. Physiol. 115:319-337). To exert its effect, Mg(2+) presumably binds to a site in or near the eag voltage sensor. We have tested the hypothesis that acidic residues unique to eag family members, located in transmembrane segments S2 and S3, contribute to the Mg(2+)-binding site. Two eag-specific acidic residues and three acidic residues found in the S2 and S3 segments of all voltage-dependent K(+) channels were individually mutated in Drosophila eag, mutant channels were expressed in Xenopus oocytes, and the effect of Mg(2+) on ionic current kinetics was measured using a two electrode voltage clamp. Neutralization of eag-specific residues D278 in S2 and D327 in S3 eliminated Mg(2+)-sensitivity and mimicked the slowing of activation kinetics caused by Mg(2+) binding to the wild-type channel. These results suggest that Mg(2+) modulates activation kinetics in wild-type eag by screening the negatively charged side chains of D278 and D327. Therefore, these residues are likely to coordinate the bound ion. In contrast, neutralization of the widely conserved residues D284 in S2 and D319 in S3 preserved the fast kinetics seen in wild-type eag in the absence of Mg(2+), indicating that D284 and D319 do not mediate the slowing of activation caused by Mg(2+) binding. Mutations at D284 affected the eag gating pathway, shifting the voltage dependence of Mg(2+)-sensitive, rate limiting transitions in the hyperpolarized direction. Another widely conserved residue, D274 in S2, is not required for Mg(2+) sensitivity but is in the vicinity of the binding site. We conclude that Mg(2+) binds in a water-filled pocket between S2 and S3 and thereby modulates voltage-dependent gating. The identification of this site constrains the packing of transmembrane segments in the voltage sensor of K(+) channels, and suggests a molecular mechanism by which extracellular cations modulate eag activation kinetics.

Dissociation and unfolding of cold-active alkaline phosphatase from atlantic cod in the presence of guanidinium chloride

Cold-adaptation of enzymes involves improvements in catalytic efficiency. This paper describes studies on the conformational stability of a cold-active alkaline phosphatase (AP) from Atlantic cod, with the aim of understanding more clearly its structural stability in terms of subunit dissociation and unfolding of monomers. AP is a homodimeric enzyme that is only active in the dimeric state. Tryptophan fluorescence, size-exclusion chromatography and enzyme activity were used to monitor alterations in conformational state induced by guanidinium chloride or urea. In cod AP, a clear distinction could be made between dissociation of dimers into monomers and subsequent unfolding of monomers (fits a three-state model). In contrast, dimer dissociation of calf AP coincided with the monophasic unfolding curve observed by tryptophan fluorescence (fits a two-state model). The DeltaG for dimer dissociation of cod AP was 8.3 kcal.mol-1, and the monomer stabilization free energy was 2.2 kcal.mol-1, giving a total of 12.7 kcal.mol-1, whereas the total free energy of calf intestinal AP was 17.3 kcal.mol-1. Thus, dimer formation provided a major contribution to the overall stability of the cod enzyme. Phosphate, the reaction product, had the effect of promoting dimer dissociation and stabilizing the monomers. Cod AP has reduced affinity for inorganic phosphate, the release of which is the rate-limiting step of the reaction mechanism. More flexible links at the interface between the dimer subunits may ease structural rearrangements that facilitate more rapid release of phosphate, and thus catalytic turnover.

Mechanism of catalysis of the cofactor-independent phosphoglycerate mutase from Bacillus stearothermophilus. Crystal structure of the complex with 2-phosphoglycerate

The structure of the complex between the 2, 3-diphosphoglycerate-independent phosphoglycerate mutase (iPGM) from Bacillus stearothermophilus and its 3-phosphoglycerate substrate has recently been solved, and analysis of this structure allowed formulation of a mechanism for iPGM catalysis. In order to obtain further evidence for this mechanism, we have solved the structure of this iPGM complexed with 2-phosphoglycerate and two Mn(2+) ions at 1. 7-A resolution. The structure consists of two different domains connected by two loops and interacting through a network of hydrogen bonds. This structure is consistent with the proposed mechanism for iPGM catalysis, with the two main steps in catalysis being a phosphatase reaction removing the phosphate from 2- or 3-phosphoglycerate, generating an enzyme-bound phosphoserine intermediate, followed by a phosphotransferase reaction as the phosphate is transferred from the enzyme back to the glycerate moiety. The structure also allowed the assignment of the function of the two domains of the enzyme, one of which participates in the phosphatase reaction and formation of the phosphoserine enzyme intermediate, with the other involved in the phosphotransferase reaction regenerating phosphoglycerate. Significant structural similarity has also been found between the active site of the iPGM domain catalyzing the phosphatase reaction and Escherichia coli alkaline phosphatase.

A revised mechanism for the alkaline phosphatase reaction involving three metal ions

Here, X-ray crystallography has been used to investigate the proposed double in-line displacement mechanism of Escherichia coli alkaline phosphatase in which two of the three active-site metal ions have a direct role in catalysis. Two new X-ray crystal structures of the wild-type enzyme in the absence and presence of inorganic phosphate have been refined at 1.75 A to final working R-factors of 15.4% and 16.4%, respectively. In the refinement of both structures, residues in the active sites were treated anisotropically. The ellipsoids resulting from the partial anisotropic refinement show a clear route for the binding and release of substrate/product. In addition, a direct comparison of the refined structures with and without phosphate reveal a strong correlation between the occupancy of the third metal-binding site and the conformation of the Ser102 nucleophile. These findings clarify two important and unresolved aspects of the previously proposed catalytic mechanism, how Ser102 is activated for nucleophilic attack and why a magnesium ion in the third metal site is required for catalysis. Analysis of these results suggest that three metal-ion assisted catalysis is a more accurate description of the mechanism of the alkaline phosphatase reaction. A revised mechanism for the catalytic reaction of alkaline phosphatase is proposed on the basis of the two new X-ray crystal structures reported.

Structure and mechanism of action of a novel phosphoglycerate mutase from Bacillus stearothermophilus

Bacillus stearothermophilus phosphoglycerate mutase (PGM), which interconverts 2- and 3-phosphoglyceric acid (PGA), does not require 2,3-diphosphoglyceric acid for activity. However, this enzyme does have an absolute and specific requirement for Mn(2+) ions for catalysis. Here we report the crystal structure of this enzyme complexed with 3PGA and manganese ions to 1.9 A resolution; this is the first crystal structure of a diphosphoglycerate-independent PGM to be determined. This information, plus the location of the two bound Mn(2+) ions and the 3PGA have allowed formulation of a possible catalytic mechanism for this PGM. In this mechanism Mn(2+) ions facilitate the transfer of the substrate's phosphate group to Ser62 to form a phosphoserine intermediate. In the subsequent phosphotransferase part of the reaction, the phosphate group is transferred from Ser62 to the O2 or O3 positions of the reoriented glycerate to yield the PGA product. Site-directed mutagenesis studies were used to confirm our mechanism and the involvement of specific enzyme residues in Mn(2+) binding and catalysis.

The mechanism of the alkaline phosphatase reaction: insights from NMR, crystallography and site-specific mutagenesis

The proposed double in-line displacement mechanism of Escherichia coli alkaline phosphatase (AP) involving two-metal ion catalysis is based on NMR spectroscopic and X-ray crystallographic studies. This mechanism is further supported by the X-ray crystal structures of the covalent phospho-enzyme intermediate of the H331Q mutant AP and of the transition state complex between the wild-type enzyme and vanadate, a transition state analog. Kinetic and structural studies on several genetically engineered versions of AP illustrate the overall importance of the active site's metal geometry, hydrogen bonding network and electrostatic potential in the catalytic mechanism.