Event specific real-time quantitative PCR for genetically modified Bt11 maize (Zea mays)

Constitutive expression of a pea apyrase, psNTP9, increases seed yield in field-grown soybean

To address the demand for food by a rapidly growing human population, agricultural scientists have carried out both plant breeding and genetic engineering research. Previously, we reported that the constitutive expression of a pea apyrase (Nucleoside triphosphate, diphosphohydrolase) gene, psNTP9, under the control of the CaMV35S promoter, resulted in soybean plants with an expanded root system architecture, enhanced drought resistance and increased seed yield when they are grown in greenhouses under controlled conditions. Here, we report that psNTP9-expressing soybean lines also show significantly enhanced seed yields when grown in multiple different field conditions at multiple field sites, including when the gene is introgressed into elite germplasm. The transgenic lines have higher leaf chlorophyll and soluble protein contents and decreased stomatal density and cuticle permeability, traits that increase water use efficiency and likely contribute to the increased seed yields of field-grown plants. These altered properties are explained, in part, by genome-wide gene expression changes induced by the transgene.

Identification of the Pol Gene as a Species-Specific Diagnostic Marker for Qualitative and Quantitative PCR Detection of Tricholoma matsutake

Tricholoma matsutake is a rare, precious, and wild edible fungus that could not be cultivated artificially until now. This situation has given way to the introduction of fake T. matsutake commodities to the mushroom market. Among the methods used to detect food adulteration, amplification of species-specific diagnostic marker is particularly important and accurate. In this study, the Pol gene is reported as a species-specific diagnostic marker to identify three T. matsutake varieties and 10 other types of edible mushrooms through qualitative and quantitative PCR. The PCR results did not reveal variations in the amplified region, and the detection limits of qualitative and quantitative PCR were found to be 8 ng and 32 pg, respectively. Southern blot showed that the Pol gene exists as a single copy in the T. matsutake genome. The method that produced the purest DNA of T. matsutake in this study was also determined, and the high-concentration salt precipitation method was confirmed to be the most suitable among the methods tested. The assay proposed in this work is applicable not only to the detection of raw materials but also to the examination of processed products containing T. matsutake.

Monitoring the prevalence of genetically modified maize in commercial animal feeds and food products in Turkey

BACKGROUND

EU legislation strictly controls use of genetically modified (GM) crops in food and feed products, and requires them to be labelled if the total GM content is greater than 9 g kg(-1) (for approved GM crops). We screened maize-containing food and feed products from Turkey to assess the prevalence of GM material.

RESULTS

With this aim, 83 food and feed products - none labelled as containing GM material - were screened using multiplex real-time polymerase chain reaction (PCR) for four common GM elements (35S/NOS/bar/FMV). Of these, 18.2% of feeds and 6% of food samples tested positive for one or more of these elements, and were subjected to event-specific PCR to identify which GM organisms they contained. Most samples were negative for the approved GM events tested, suggesting that they may contain adventitious GM contaminants. One sample was shown to contain an unapproved GM event (MON810, along with GA21) at a concentration well above the statutory labelling requirement.

CONCLUSION

Current legislation has restricted the penetration of GM maize into the Turkish food industry but not eliminated it, and the proliferation of different GM events is making monitoring increasingly complex. Our results indicate that labelling requirements are not being followed in some cases. © 2015 Society of Chemical Industry.

Assessment of a direct hybridization microarray strategy for comprehensive monitoring of genetically modified organisms (GMOs)

Detection of GMO material in crop and food samples is the primary step in GMO monitoring and regulation, with the increasing number of GM events in the world market requiring detection solutions with high multiplexing capacity. In this study, we test the suitability of a high-density oligonucleotide microarray platform for direct, quantitative detection of GMOs found in the Turkish feed market. We tested 1830 different 60nt probes designed to cover the GM cassettes from 12 different GM cultivars (3 soya, 9 maize), as well as plant species-specific and contamination controls, and developed a data analysis method aiming to provide maximum throughput and sensitivity. The system was able specifically to identify each cultivar, and in 10/12 cases was sensitive enough to detect GMO DNA at concentrations of ⩽1%. These GMOs could also be quantified using the microarray, as their fluorescence signals increased linearly with GMO concentration.

Current and new approaches in GMO detection: challenges and solutions

In many countries, genetically modified organisms (GMO) legislations have been established in order to guarantee the traceability of food/feed products on the market and to protect the consumer freedom of choice. Therefore, several GMO detection strategies, mainly based on DNA, have been developed to implement these legislations. Due to its numerous advantages, the quantitative PCR (qPCR) is the method of choice for the enforcement laboratories in GMO routine analysis. However, given the increasing number and diversity of GMO developed and put on the market around the world, some technical hurdles could be encountered with the qPCR technology, mainly owing to its inherent properties. To address these challenges, alternative GMO detection methods have been developed, allowing faster detections of single GM target (e.g., loop-mediated isothermal amplification), simultaneous detections of multiple GM targets (e.g., PCR capillary gel electrophoresis, microarray, and Luminex), more accurate quantification of GM targets (e.g., digital PCR), or characterization of partially known (e.g., DNA walking and Next Generation Sequencing (NGS)) or unknown (e.g., NGS) GMO. The benefits and drawbacks of these methods are discussed in this review.

Molecular Detection of 10 of the Most Unwanted Alien Forest Pathogens in Canada Using Real-Time PCR

Invasive alien tree pathogens can cause significant economic losses as well as large-scale damage to natural ecosystems. Early detection to prevent their establishment and spread is an important approach used by several national plant protection organizations (NPPOs). Molecular detection tools targeting 10 of the most unwanted alien forest pathogens in Canada were developed as part of the TAIGA project (http://taigaforesthealth.com/). Forest pathogens were selected following an independent prioritization. Specific TaqMan real-time PCR detection assays were designed to function under homogeneous conditions so that they may be used in 96- or 384-well plate format arrays for high-throughput testing of large numbers of samples against multiple targets. Assays were validated for 1) specificity, 2) sensitivity, 3) precision, and 4) robustness on environmental samples. All assays were highly specific when evaluated against a panel of pure cultures of target and phylogenetically closely-related species. Sensitivity, evaluated by assessing the limit of detection (with a threshold of 95% of positive samples), was found to be between one and ten target gene region copies. Precision or repeatability of each assay revealed a mean coefficient of variation of 3.4%. All assays successfully allowed detection of target pathogen on positive environmental samples, without any non-specific amplification. These molecular detection tools will allow for rapid and reliable detection of 10 of the most unwanted alien forest pathogens in Canada.

Development of a loop-mediated isothermal amplification (LAMP) assay for rapid and specific detection of common genetically modified organisms (GMOs)

Here, we developed a loop-mediated isothermal amplification (LAMP) assay for 11 common transgenic target DNA in GMOs. Six sets of LAMP primer candidates for each target were designed and their specificity, sensitivity, and reproductivity were evaluated. With the optimized LAMP primers, this LAMP assay was simply run within 45-60 min to detect all these targets in GMOs tested. The sensitivity, specificity, and reproductivity of the LAMP assay were further analyzed in comparison with those of Real-Time PCR. In consistent with real-time PCR, detection of 0.5% GMOs in equivalent background DNA was possible using this LAMP assay for all targets. In comparison with real-time PCR, the LAMP assay showed the same results with simple instruments. Hence, the LAMP assay developed can provide a rapid and simple approach for routine screening as well as specific events detection of many GMOs.

Evaluation of droplet digital PCR for characterizing plasmid reference material used for quantifying ammonia oxidizers and denitrifiers

DNA reference materials of certified value have a critical function in many analytical processes of DNA measurement. Quantification of amoA genes in ammonia oxidizing bacteria (AOB) and archaea (AOA), and of nirS and nosZ genes in the denitrifiers is very important for determining their distribution and abundance in the natural environment. A plasmid reference material containing nirS, nosZ, amoA-AOB, and amoA-AOA is developed to provide a DNA standard with copy number concentration for ensuring comparability and reliability of quantification of these genes. Droplet digital PCR (ddPCR) was evaluated for characterization of the plasmid reference material. The result revealed that restriction endonuclease digestion of plasmids can improve amplification efficiency and minimize the measurement bias of ddPCR. Compared with the conformation of the plasmid, the size of the DNA fragment containing the target sequence and the location of the restriction site relative to the target sequence are not significant factors affecting plasmid quantification by ddPCR. Liquid chromatography–isotope dilution mass spectrometry (LC–IDMS) was used to provide independent data for quantifying the plasmid reference material. The copy number concentration of the digested plasmid determined by ddPCR agreed well with that determined by LC–IDMS, improving both the accuracy and reliability of the plasmid reference material. The reference value, with its expanded uncertainty (k = 2), of the plasmid reference material was determined to be (5.19 ± 0.41) × 10⁹ copies μL⁻¹ by averaging the results of two independent measurements. Consideration of the factors revealed in this study can improve the reliability and accuracy of ddPCR; thus, this method has the potential to accurately quantify DNA reference materials.

A high-throughput method for GMO multi-detection using a microfluidic dynamic array

The ever-increasing production of genetically modified crops generates a demand for high-throughput DNA-based methods for the enforcement of genetically modified organisms (GMO) labelling requirements. The application of standard real-time PCR will become increasingly costly with the growth of the number of GMOs that is potentially present in an individual sample. The present work presents the results of an innovative approach in genetically modified crops analysis by DNA based methods, which is the use of a microfluidic dynamic array as a high throughput multi-detection system. In order to evaluate the system, six test samples with an increasing degree of complexity were prepared, preamplified and subsequently analysed in the Fluidigm system. Twenty-eight assays targeting different DNA elements, GM events and species-specific reference genes were used in the experiment. The large majority of the assays tested presented expected results. The power of low level detection was assessed and elements present at concentrations as low as 0.06 % were successfully detected. The approach proposed in this work presents the Fluidigm system as a suitable and promising platform for GMO multi-detection.

An innovative and integrated approach based on DNA walking to identify unauthorised GMOs

In the coming years, the frequency of unauthorised genetically modified organisms (GMOs) being present in the European food and feed chain will increase significantly. Therefore, we have developed a strategy to identify unauthorised GMOs containing a pCAMBIA family vector, frequently present in transgenic plants. This integrated approach is performed in two successive steps on Bt rice grains. First, the potential presence of unauthorised GMOs is assessed by the qPCR SYBR®Green technology targeting the terminator 35S pCAMBIA element. Second, its presence is confirmed via the characterisation of the junction between the transgenic cassette and the rice genome. To this end, a DNA walking strategy is applied using a first reverse primer followed by two semi-nested PCR rounds using primers that are each time nested to the previous reverse primer. This approach allows to rapidly identify the transgene flanking region and can easily be implemented by the enforcement laboratories.

Detection and identification of genetically modified EE-1 brinjal (Solanum melongena) by single, multiplex and SYBR® real-time PCR

BACKGROUND

Brinjal is an important vegetable crop. Major crop loss of brinjal is due to insect attack. Insect-resistant EE-1 brinjal has been developed and is awaiting approval for commercial release. Consumer health concerns and implementation of international labelling legislation demand reliable analytical detection methods for genetically modified (GM) varieties.

RESULTS

End-point and real-time polymerase chain reaction (PCR) methods were used to detect EE-1 brinjal. In end-point PCR, primer pairs specific to 35S CaMV promoter, NOS terminator and nptII gene common to other GM crops were used. Based on the revealed 3' transgene integration sequence, primers specific for the event EE-1 brinjal were designed. These primers were used for end-point single, multiplex and SYBR-based real-time PCR. End-point single PCR showed that the designed primers were highly specific to event EE-1 with a sensitivity of 20 pg of genomic DNA, corresponding to 20 copies of haploid EE-1 brinjal genomic DNA. The limits of detection and quantification for SYBR-based real-time PCR assay were 10 and 100 copies respectively.

CONCLUSION

The prior development of detection methods for this important vegetable crop will facilitate compliance with any forthcoming labelling regulations.

Verification of Real‐Time PCR Methods for Qualitative and Quantitative Testing of Genetically Modified Organisms

This article reports the experience of a university laboratory in accreditation of molecular biology methods for genetically modified (GM) organisms detection according to the International Organization for Standardization (ISO)/International Electrotechnical Commission 17025 standard. Verification studies were performed for one screening (35S promoter), one construct‐specific (p35S/Chloroplast Transit Peptides‐5‐enolpyruvylshikimate‐3‐phosphate synthase [CTP‐EPSPS]) and one event‐specific (Bt11 maize) real‐time polymerase chain reaction methods. Our procedures were performed as described in the ISO 21570 2005, except for the analysis done through a DNA Engine Opticon 2 MJ research instrument. The following method–performance characteristics were evaluated: amplification efficiency, linearity, dynamic range, limit of detection, limit of quantification, precision and trueness. Comparison of the performance results obtained for quantitative methods with the values of inter‐laboratory ring trials, coordinated by the European Union Reference Laboratory for GM Food and Feed, confirmed that the laboratory is able to fulfill the published criteria.

Practical Applications

This article illustrates the experience of a university laboratory with the International Organization for Standardization/International Electrotechnical Commission 17025 accreditation for genetically modified organisms testing. In‐house verification has been carried out for one screening (35S promoter), one construct‐specific (p35S/Chloroplast Transit Peptides‐5‐enolpyruvylshikimate‐3‐phosphate synthase [CTP‐EPSPS]) and one event‐specific (Bt11 maize) real‐time polymerase chain reaction methods. We reported for the first time validation data obtained through a DNA Engine Opticon 2 MJ Research instrument. The described experimental procedure could represent a pattern for researchers interested in setting up verification of validated methods for genetically modified organism quantitative and qualitative testing.

Gene expression analysis by real-time PCR: experimental demonstration of PCR detection limits

Reverse transcription followed by real-time PCR (RT-qPCR) is the gold standard for quantifying gene expression. However, because of PCR detection limits, theorized to be three template copies, the quantification of genes exhibiting great expression variability is challenging. Using genes with high to low expression in rat tissues we experimentally demonstrated this limit and found it to be applicable only for describing reactions in which stochastic events and the Monte Carlo effect are present. We also determined the lower limits of RNA input that should be used to prevent artifactual template quantification and we propose a methodology to assess RT-qPCR detection limits in any qPCR platform.

Lambda genomic DNA quantification using ultrasonic treatment followed by liquid chromatography-isotope dilution mass spectrometry

Quantification of genomic DNA that is traceable to the SI was performed successfully by measuring the individual nucleotides. Specifically, ultrasound was used to shear lambda genomic DNA into fragments of less than 200 base pairs, followed by deoxyribonuclease Ι and phosphodiesterase Ι digestion and liquid chromatography-isotope dilution mass spectrometry (LC-IDMS) quantification to estimate the mass fraction of the lambda DNA, based on the constituent deoxynucleotide monophosphates (dNMPs) within the molecule. Digital PCR (dPCR) was employed to quantify the same lambda DNA solution to provide independent data for comparing the performance of two quantitative methods. On the basis of the LC-IDMS measurement after ultrasonic treatment of the sample, the concentration of lambda DNA was 273.1 ± 9.8 μg/g (expanded uncertainty at the 95% confidence interval). This shows good agreement with the data from dPCR. Additionally, the result calculated on the basis of the sum of the concentrations of the four dNMPs is the same as that calculated on the basis of the sequence, which indicates that knowledge of the DNA sequence and length is unnecessary to measure the total DNA concentration when applying ultrasonic treatment-LC-IDMS.

Genome walking in eukaryotes

Genome walking is a molecular procedure for the direct identification of nucleotide sequences from purified genomes. The only requirement is the availability of a known nucleotide sequence from which to start. Several genome walking methods have been developed in the last 20 years, with continuous improvements added to the first basic strategies, including the recent coupling with next generation sequencing technologies. This review focuses on the use of genome walking strategies in several aspects of the study of eukaryotic genomes. In a first part, the analysis of the numerous strategies available is reported. The technical aspects involved in genome walking are particularly intriguing, also because they represent the synthesis of the talent, the fantasy and the intelligence of several scientists. Applications in which genome walking can be employed are systematically examined in the second part of the review, showing the large potentiality of this technique, including not only the simple identification of nucleotide sequences but also the analysis of large collections of mutants obtained from the insertion of DNA of viral origin, transposons and transfer DNA (T-DNA) constructs. The enormous amount of data obtained indicates that genome walking, with its large range of applicability, multiplicity of strategies and recent developments, will continue to have much to offer for the rapid identification of unknown sequences in several fields of genomic research.

Evaluation of a real-time polymerase chain reaction (PCR) assay for detection of anisakis simplex parasite as a food-borne allergen source in seafood products

Anisakis simplex has been recognized as an important cause of disease in humans and as a food-borne allergen source. Actually, this food-borne parasite was recently identified as an emerging food safety risk. An A. simplex -specific primer-probe system based on a real-time polymerase chain reaction (PCR) detection assay has been successfully optimized and validated with seafood samples. In addition, a DNA extraction procedure has been optimized to detect the presence of the nematode in food samples. The assay is a very reliable, specific, and sensitive methodology to detect the presence of traces of this parasite in seafood products, including highly processed samples. As a result, 13 sequences of cytochrome c oxidase II gene were obtained and scrutinized to calculate intra- and interspecific variabilities of 0 and 35-67%, respectively. Finally, an efficiency of 2.07 +/- 0.14 of the assay was calculated, and a limit of detection of 40 ppm parasite in 25 g of sample was also optimized. Actually, the presence of this parasite in several seafood products has been demonstrated, enforcing the necessity of a design for a good manufacturing practice protocol for the processing industry to minimize the presence of this parasite as a food-borne allergen source in seafood products.

Design of multiplex calibrant plasmids, their use in GMO detection and the limit of their applicability for quantitative purposes owing to competition effects

Five double-target multiplex plasmids to be used as calibrants for GMO quantification were constructed. They were composed of two modified targets associated in tandem in the same plasmid: (1) a part of the soybean lectin gene and (2) a part of the transgenic construction of the GTS40-3-2 event. Modifications were performed in such a way that each target could be amplified with the same primers as those for the original target from which they were derived but such that each was specifically detected with an appropriate probe. Sequence modifications were done to keep the parameters of the new target as similar as possible to those of its original sequence. The plasmids were designed to be used either in separate reactions or in multiplex reactions. Evidence is given that with each of the five different plasmids used in separate wells as a calibrant for a different copy number, a calibration curve can be built. When the targets were amplified together (in multiplex) and at different concentrations inside the same well, the calibration curves showed that there was a competition effect between the targets and this limits the range of copy numbers for calibration over a maximum of 2 orders of magnitude. Another possible application of multiplex plasmids is discussed.

Testing for genetically modified organisms (GMOs): Past, present and future perspectives

This paper presents an overview of GMO testing methodologies and how these have evolved and may evolve in the next decade. Challenges and limitations for the application of the test methods as well as to the interpretation of results produced with the methods are highlighted and discussed, bearing in mind the various interests and competences of the involved stakeholders. To better understand the suitability and limitations of detection methodologies the evolution of transformation processes for creation of GMOs is briefly reviewed.

Event-specific detection of stacked genetically modified maize Bt11 x GA21 by UP-M-PCR and real-time PCR

More and more stacked GMOs have been developed for more improved functional properties and/or a stronger intended characteristic, such as antipest, improved product efficiency etc. Bt11 x GA21 is a new kind of stacked GM maize developed by Monsanto Company. Since there are no unique flanking sequences in stacked GMOs, up to now, no appropriate method has been reported to accurately detect them. In this passage, a novel universal primer multiplex PCR (UP-M-PCR) was developed and applied as a rapid screening method for the simultaneous detection of five target sequences (NOS, 35S, Bt11 event, GA21 event, and IVR) in maize Bt11 x GA21. This method overcame the disadvantages rooted deeply in conventional multiplex PCR such as complex manipulation, lower sensitivity, self-inhibition and amplification disparity resulting from different primers. What's more, it got a high specificity and had a detection limit of 0.1% (approximates to 38 haploid genome copies). Furthermore, real-time PCR combined with multivariate statistical analysis was used for accurate quantification of stacked GM maize Bt11 x GA21 in 100% GM maize mixture (Bt11 x GA21, Bt11 and GA21). Detection results showed that this method could accurately validate the content of Bt11, GA21 and Bt11 x GA21 in 100% GM mixture with a detection limit of 0.5% (approximates to 200 haploid genome copies) and a low relative standard deviation <5%. All the data proved that this method may be widely applied in event-specific detection of other stacked GMOs in GM-mixture.

Simultaneous detection of eight genetically modified maize lines using a combination of event- and construct-specific multiplex-PCR technique

To fulfill labeling and traceability requirement of genetically modified (GM) maize for trade and regulation, it is essential to develop an event-specific detection method for monitoring the presence of transgenes. In pursuit of this purpose, we systematically optimized and established a combined event- and construct-specific multiplex polymerase chain reaction (mPCR) technique for simultaneous detection of 8 GM maize lines. Altogether 9 sets of primers were designed, including six that were event-specific for Event176, Bt11, TC1507, NK603, MON863, and Mon810; two that were construct-specific for T25 and GA21, and one for an endogenous zein gene. The transgene in each GM maize line and the endogenous zein gene could be clearly detected and distinguished according to the different sizes of PCR amplicons. The limit of detection (LOD) was approximately 0.25% (v/v), although the detection can be as sensitive as 0.1% as demonstrated by the International Seed Testing Association (ISTA) proficiency test. This study further improves the current PCR-based detection method for GM maize. The method can be used in an easy, sensitive, and cost and time effective way for the identification and quality screening of a specific GM maize line.

Detection and quantification of genetically modified organisms using very short, locked nucleic acid TaqMan probes

Many countries have introduced mandatory labeling requirements on foods derived from genetically modified organisms (GMOs). Real-time quantitative polymerase chain reaction (PCR) based upon the TaqMan probe chemistry has become the method mostly used to support these regulations; moreover, event-specific PCR is the preferred method in GMO detection because of its high specificity based on the flanking sequence of the exogenous integrant. The aim of this study was to evaluate the use of very short (eight-nucleotide long), locked nucleic acid (LNA) TaqMan probes in 5'-nuclease PCR assays for the detection and quantification of GMOs. Classic TaqMan and LNA TaqMan probes were compared for the analysis of the maize MON810 transgene. The performance of the two types of probes was tested on the maize endogenous reference gene hmga, the CaMV 35S promoter, and the hsp70/cryIA(b) construct as well as for the event-specific 5'-integration junction of MON810, using plasmids as standard reference molecules. The results of our study demonstrate that the LNA 5'-nuclease PCR assays represent a valid and reliable analytical system for the detection and quantification of transgenes. Application of very short LNA TaqMan probes to GMO quantification can simplify the design of 5'-nuclease assays.

Event-specific qualitative and quantitative PCR methods for the detection of genetically modified rapeseed Oxy-235

Oxy-235 is an oxynil-tolerant genetically modified rapeseed approved for commercialized planting in Canada. The aim of this study was to establish event-specific qualitative and quantitative detection methods for Oxy-235. Both the 5'- and 3'-junction sequences spanning the plant DNA and the integrated gene construct of the Oxy-235 event were isolated, sequenced and analyzed. A 1298-bp deletion of the rapeseed genomic DNA that showed a high similarity to the mRNA sequence of Arabidopsis thaliana was found in the integration site of the insert DNA. Event-specific qualitative PCR methods were established, with one method producing a 105-bp product specific for the 5'-integration junction and the other method producing a 124-bp product specific for the 3'-junction. The absolute detection limits for the qualitative PCR were determined to be 100 initial template copies for the 5'-junction and ten for the 3'-junction. Quantitative methods were also developed that targeted both of the junction fragments. The limit of detection of the quantitative PCR analysis was ten initial template copies for either the 5'- or 3'-junction, while the limit of quantification was determined to be approximately 50 initial template copies. The real-time PCR systems so established were examined with two mixed rapeseed samples with known Oxy-235 contents and found to obtain the expected results.

Event-specific qualitative and quantitative PCR detection methods for transgenic rapeseed hybrids MS1xRF1 and MS1xRF2

Except for the events RT73, MS8, RF3, and T45, event-specific detection methods for most commercialized genetically modified (GM) rapeseed varieties have not been established, and as a result, the enforcement of genetically modified organism labeling policies has been hindered. The genetically modified rapeseeds, MS1xRF1 and MS1xRF2, are 2 of 11 approved GM-rapeseed varieties for commercialization. In this study, the right border junction fragments between the gene construct and the rapeseed genome of events RF1, RF2, and MS1 were isolated using the commercially available GenomeWalker technology. Homology analysis indicated that the gene construct of RF1 integrated upstream of the nuclease gene, and that of the RF2 and MS1 inserted into the exon region of a gene encoding for an unknown protein. The event-specific primer pairs and corresponding probes were designed on the basis of the revealed right border junction fragments. Then, we successfully developed the identification and quantification methods for the gene-stacked hybrids MS1xRF1 and MS1xRF2 using those primers and probes. The relative limit of detection in the qualitative polymerase chain reaction (PCR) was 0.013% for the RF2 and MS1 assays using 100 ng of rapeseed DNA per reaction and 0.13% for the RF1 assay. The absolute limit of detection in the quantitative PCR was approximately one to two initial copies for each of the three event-specific assays. The evaluation of the real-time PCR assays revealed that the qualitative and quantitative methods developed by focusing on the gene-stacked hybrids MS1xRF1 and MS1xRF2 were highly specific, sensitive, and suitable for samples with a low quantity of DNA.