An update on polysaccharide-based nanomaterials for antimicrobial applications

Recent advancements of betulinic acid-based drug delivery systems for cancer therapy (2002-2023)

Betulinic acid, a compound classified as a pentacyclic triterpenoid, is found in abundance in a variety of medicinal plants and natural substances. Its broad spectrum of biological and medicinal properties, particularly its potent antitumor activity, has gained significant attention in recent years. The anticancer properties of betulinic acid are governed by mitochondrial signalling pathways and it exhibit selectivity for cancerous tissue, leaving non-cancerous cells and normal tissue unharmed. This characteristic is particularly valuable in chemo-resistant cases. Nevertheless, the medicinal potential of betulinic acid is hindered by its poor water solubility and short half-life, leading to sub-optimal effectiveness. This issue is being tackled by a variety of nano-sized drug delivery systems, such as polymeric nanoparticles, magnetic nanoparticles, polymeric conjugates, nanoemulsions, liposomes, nanosuspensions, carbon nanotubes, and cyclodextrin complexes. This article focuses on recent advances in nanoformulations that are tailored to the delivery of betulinic acid with enhanced effectiveness.

A2B2-type porphyrins enhanced by N-donor units: Synthesis optimization and photodynamic efficiency towards S. aureus

Antimicrobial photodynamic therapy (aPDT) is a promising alternative or complementary strategy to traditional antimicrobial treatments. This approach relies on the light activation of a photosensitizer (PS) to generate reactive oxygen species (ROS) that destroy microorganisms. This study described the synthesizes of a series of Zn(II) complexes and free-base trans-A2B2-type porphyrins, modified with nitrogen-based donor moieties directly attached to the porphyrin core via CN bonds. The functionalization of the porphyrin macrocycle was strongly dependent on the nature of the porphyrin template (H2BPP, ZnBPP or ZnBr2BPP) as well as the structure of the nitrogen-based reagent (carbazole, 3,6-dimethoxy-9H-carbazole, 10H-phenoxazine, 10H-phenothiazine and bis(4-methoxyphenyl)amine). Both series of derivatives were effectively incorporated into polyvinylpyrrolidone (PVP) formulations, allowing them to overcome their low water solubility. The photodynamic activity of the PVP-based formulations obtained was assessed towards the Gram-positive Staphylococcus aureus, with and without the coadjuvant KI. The biological assays revealed that the new PVP-PS formulations were generally highly effective in the photoinactivation of S. aureus in the presence of KI. Principal component analysis (PCA), used to examine relationships between variables and identify key factors, showed that iodine (I2) formation was the most influential factor of the photosensitizing activity of PVP-based formulations. The results showed that trans-A2B2-type porphyrins modified with N-donor units through CN bond have a high potential to develop novel and efficient porphyrin-based PS to be used in the photodynamic inactivation of bacterial strains.

A novel controlled release system Au-CuONP/P(MMAcoMAA)/chitosan nanocomposites: Synthesis, characterization, antimicrobial activity and in silico molecular docking

The aim of the study is to synthesize antibacterial nanocomposites containing green synthesized bimetal nanoparticles, which offers a low-cost and environmentally friendly application opportunity in order to employ in drug delivery. In the study, cotoneaster (Cotoneaster horizontalis) fruits, laurel (Laurus nobilis) and sage (Salvia officinalis) leaves grown in the natural flora of Turkey were used for the synthesis of Au-CuO nanoparticles. Chitosan/nanochitosan and P(MMAcoMAA) containing nanocomposite material was synthesized with the obtained bimetallic nanoparticles. Characterization of the prepared nanocomposite was performed by FT-IR, XRD, SEM, UV-Vis and DLS. Antibacterial activities against E. coli and S. aureus and antifungal activities against A. niger were investigated. The usability of the developed nanocomposite in controlled release systems was tested in the BSA model. The binding affinities of Au-CuO nanoparticles to E. coli β-lactamase, S. aureus TMK and A. niger Fdc1 enzymes were also determined and possible antibacterial and antifungal mechanisms were simulated by molecular docking analysis. Au-CuO NPs showed absorbance peaks between 273-276 and 542-552 nm corresponding to CuO and Au, respectively in UV-Vis analysis evaluating the presence of bimetallic NPs. The peaks observed between 567 and 602 cm-1 in all samples in FT-IR analysis proves the presence of metal-oxides. In SEM images, it was seen that Au-CuO NPs are between 10 and 90 nm and nanocomposites were homogeneously distributed porous matrix structures. 2θ values in XRD patterns of Au-CuO NPs were 38.2°, 44.5°, 64.7° and 77.7° and corresponded to Au and CuO phases, and peaks from both phases represented successful nanoparticle and nanocomposite formation containing bimetal structure. All synthesized materials showed strong antimicrobial activity, close to commercial antibiotics. Inhibition zone of nanocomposite was measured as 25 mm against E. coli, 26 mm against S. aureus and 28 mm against A. niger. MIC and MBC values of nanoparticles and nanocomposites were higher against Gram (-) bacteria. Controlled drug release was studied on the BSA model for 7 days and while the release of the chitosan-containing nanocomposite was 91 % at the end of the period, the nanochitosan sample released 88 %. The binding energies of the synthesized Au-CuO NPs to β-lactamase, TMK and Fdc1 obtained in the molecular docking analysis, were -1.68, -1.60 and -2.16 kcal/mol, respectively. The results showed that a nanomaterial with controlled release capability, antibacterial and antifungal properties that can contain proteins was produced.

Nanogels conjugated with cell-penetrating peptide as drug delivery vehicle for treating urinary tract infections

Among hospital-acquired infections, Pseudomonas aeruginosa-associated urinary tract infections (UTIs) are mainly caused by indwelling urethral catheters (catheter-associated UTIs or CAUTIs) and are difficult to treat, resulting in high rates of morbidity among hospitalized patients. While antibiotics can successfully treat bacteria in the bladder lumen, they are inefficient at crossing stratified urothelium plasma membranes to kill persistent intracellular bacterial communities (IBCs). Herein, we introduce an approach to target UTI IBCs by locally delivering the antibiotic gentamicin via polymeric nanogels conjugated with a cell-penetrating peptide Cys-Gly-Lys-Arg-Lys. This novel approach delivered ~36 % more intracellular gentamicin compared to drug delivered in solution in vitro. In an acute UTI murine model, the nanogel cell-penetrating peptide drug delivery system facilitated the transport of gentamicin into the urothelium and resulted in >90 % clearance of a uropathogenic P. aeruginosa clinical strain in vivo.

Nanomedicines as a cutting-edge solution to combat antimicrobial resistance

Antimicrobial resistance (AMR) poses a critical threat to global public health, necessitating the development of novel strategies. AMR occurs when bacteria, viruses, fungi, and parasites evolve to resist antimicrobial drugs, making infections difficult to treat and increasing the risk of disease spread, severe illness, and death. Over 70% of infection-causing microorganisms are estimated to be resistant to one or several antimicrobial drugs. AMR mechanisms include efflux pumps, target modifications (e.g., mutations in penicillin-binding proteins (PBPs), ribosomal subunits, or DNA gyrase), drug hydrolysis by enzymes (e.g., β-lactamase), and membrane alterations that reduce the antibiotic's binding affinity and entry. Microbes also resist antimicrobials through peptidoglycan precursor modification, ribosomal subunit methylation, and alterations in metabolic enzymes. Rapid development of new strategies is essential to curb the spread of AMR and microbial infections. Nanomedicines, with their small size and unique physicochemical properties, offer a promising solution by overcoming drug resistance mechanisms such as reduced drug uptake, increased efflux, biofilm formation, and intracellular bacterial persistence. They enhance the therapeutic efficacy of antimicrobial agents, reduce toxicity, and tackle microbial resistance effectively. Various nanomaterials, including polymeric-based, lipid-based, metal nanoparticles, carbohydrate-derived, nucleic acid-based, and hydrogels, provide efficient solutions for AMR. This review addresses the epidemiology of microbial resistance, outlines key resistance mechanisms, and explores how nanomedicines overcome these barriers. In conclusion, nanomaterials represent a versatile and powerful approach to combating the current antimicrobial crisis.

Tamarindus indica seed polysaccharide-copper nanocomposite: An innovative solution for green environment and antimicrobial studies

The purpose of this study was to synthesize ecofriendly nano-composite in which agricultural waste (seeds of Tamarindus indica) was used to synthesize tamarind seed polysaccharides (TSP) and its composite with copper nanoparticles (Cu-NPs) for the purpose of green and clean environment as well as reduction of green-house gases. Confirmation of extracted TSP, synthesized nanocomposite was carried out using FTIR, SEM, PXRD and EDX techniques. In FTIR analysis TSP gives a strong broad peak at 3331 cm-1 due to -OH group and in case of composite its intensity is reduced which might be due to the interactions between -OH and Cu+2 ions. SEM analysis gives that TSP have irregular and rough surface while Cu-NPs exhibited spherical morphology and composite showed clustering of spherical shape to rough surface. EDX analysis quantitatively represented copper having atomic ratio 0.57 % which confirms the synthesis of composite. Furthermore, synthesized composite demonstrated excellent antibacterial activity against gram-positive (S.aureus) and gram-negative bacteria (E.coli) even greater than standard medicine (ciprofloxacin). From this study it was revealed that agriculture waste can be utilized to make environment green as well as synthesized composite from agricultural waste seed also displayed excellent antimicrobial activities which directs that they can be utilized in medical field. This study aims to assess the antimicrobial properties of the nanocomposite, aiming to contribute to the development of effective antimicrobial agents. Through these objectives, the research seeks to bridge the gap between green technology and antimicrobial efficacy, offering a promising avenue for both environmental conservation and healthcare advancements.

Porphyrin Photosensitizers Grafted in Cellulose Supports: A Review

Cellulose is the most abundant natural biopolymer and owing to its compatibility with biological tissues, it is considered a versatile starting material for developing new and sustainable materials from renewable resources. With the advent of drug-resistance among pathogenic microorganisms, recent strategies have focused on the development of novel treatment options and alternative antimicrobial therapies, such as antimicrobial photodynamic therapy (aPDT). This approach encompasses the combination of photoactive dyes and harmless visible light, in the presence of dioxygen, to produce reactive oxygen species that can selectively kill microorganisms. Photosensitizers for aPDT can be adsorbed, entrapped, or linked to cellulose-like supports, providing an increase in the surface area, with improved mechanical strength, barrier, and antimicrobial properties, paving the way to new applications, such as wound disinfection, sterilization of medical materials and surfaces in different contexts (industrial, household and hospital), or prevention of microbial contamination in packaged food. This review will report the development of porphyrinic photosensitizers supported on cellulose/cellulose derivative materials to achieve effective photoinactivation. A brief overview of the efficiency of cellulose based photoactive dyes for cancer, using photodynamic therapy (PDT), will be also discussed. Particular attention will be devoted to the synthetic routes behind the preparation of the photosensitizer-cellulose functional materials.

Essential Oils as Antimicrobial Active Substances in Wound Dressings

Wound dressings for skin lesions, such as bedsores or pressure ulcers, are widely used for many patients, both during hospitalization and in subsequent treatment at home. To improve the treatment and shorten the healing time and, therefore, the cost, numerous types of wound dressings have been developed by manufacturers. Considering certain inconveniences related to the intolerance of some patients to antibiotics and the antimicrobial, antioxidant, and curative properties of certain essential oils, we conducted research by incorporating these oils, based on polyvinyl alcohol/ polyvinyl pyrrolidone (PVA/PVP) biopolymers, into dressings. The objective of this study was to study the potential of a polymeric matrix for wound healing, with polyvinyl alcohol as the main material and polyvinyl pyrrolidone and hydroxypropyl methylcellulose (HPMC) as secondary materials, together with additives (plasticizers poly(ethylene glycol) (PEG) and glycerol), stabilizers (Zn stearate), antioxidants (vitamin A and vitamin E), and four types of essential oils (fennel, peppermint, pine, and thyme essential oils). For all the studied samples, the combining compatibility, antimicrobial, and cytotoxicity properties were investigated. The obtained results demonstrated a uniform morphology for almost all the samples and adequate barrier properties for contact with suppurating wounds. The results show that the obtained samples containing essential oils have a good inhibitory effect on, or antimicrobial properties against, Staphylococcus aureus ATCC 25923, Enterococcus faecalis ATCC 29212, Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, and Candida albicans ATCC 10231. The MTT assay showed that the tested samples were not toxic and did not lead to cell death. The results showed that the essential oils used provide an effective solution as active substances in wound dressings.

Exploring the applications of hyaluronic acid-based nanoparticles for diagnosis and treatment of bacterial infections

Hyaluronic acid (HA) has become a topic of significant interest in drug delivery research due to its excellent properties, including biosafety, biodegradability, and nonimmunogenicity. Moreover, due to its ease of modification, HA can be used to prepare several HA‐based nanosystems using various approaches. These approaches involve conjugating/grafting of hydrophobic moieties, polyelectrolytes complexation with cationic polymers, or surface modification of various nanoparticles using HA. These nanoparticles are able to selectively deliver antibacterial drugs or diagnostic molecules into the site of infections. In addition, HA can bind with overexpressed cluster of differentiation 44 (CD44) receptors in macrophages and also can be degraded by a family of enzymes called hyaluronidase (HAase) to release drugs or molecules. By binding with these receptors or being degraded at the infection site by HAase, HA‐based nanoparticles allow enhanced and targeted antibacterial delivery. Herein, we present a comprehensive and up‐to‐date review that highlights various techniques of preparation of HA‐based nanoparticles that have been reported in the literature. Furthermore, we also discuss and critically analyze numerous types of HA‐based nanoparticles that have been employed in antibacterial delivery to date. This article offers a critical overview of the potential of HA‐based nanoparticles to overcome the challenges of conventional antibiotics in the treatment of bacterial infections. Moreover, this review identifies further avenues of research for developing multifunctional and biomimetic HA‐based nanoparticles for the treatment, prevention, and/or detection of pathogenic bacteria.

This article is categorized under:

Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease

Nanotechnology Approaches to Biology > Nanoscale Systems in Biology

Therapeutic Approaches and Drug Discovery > Emerging Technologies

Role of Polysaccharides Mimetic Components in Targeted Cancer Treatment

Organic or inorganic compounds are synthesized or formulated in a manner that they completely show their therapeutic actions like as a natural polysaccharide in the body. Polysaccharides, the major type of natural polymers, are efficiently biologically active, non-toxic, hydrophilic, and biodegradable and show various properties. In this manuscript, the main focus is on delivering anticancer drugs with the help of mimetic components of polysaccharides. All data collected for this manuscript was from PubMed, Elsevier, Taylor, and Francis Bentham science journals. Most chemotherapeutics are therapeutically toxin to the human body, have a narrow therapeutic index, sluggish pharmaceutical delivery mechanisms, and are poorly soluble in water. The use of mimetic components of polysaccharides leads to the enhancement of the solubility of drugs in the biological environment. The manuscript summarizes the use of mimetic components of polysaccharides along with anticancer agents which are capable to inhibit the growth of cancerous cells in the body which shows lesser adverse effects in the biological system compared to other therapies.

Antimicrobial Peptides and Macromolecules for Combating Microbial Infections: From Agents to Interfaces

Bacterial resistance caused by the overuse of antibiotics and the shelter of biofilms has evolved into a global health crisis, which drives researchers to continuously explore antimicrobial molecules and strategies to fight against drug-resistant bacteria and biofilm-associated infections. Cationic antimicrobial peptides (AMPs) are considered to be a category of potential alternative for antibiotics owing to their excellent bactericidal potency and lesser likelihood of inducing drug resistance through their distinctive antimicrobial mechanisms. In this review, the hitherto reported plentiful action modes of AMPs are systematically classified into 15 types and three categories (membrane destructive, nondestructive membrane disturbance, and intracellular targeting mechanisms). Besides natural AMPs, cationic polypeptides, synthetic polymers, and biopolymers enable to achieve tunable antimicrobial properties by optimizing their structures. Subsequently, the applications of these cationic antimicrobial agents at the biointerface as contact-active surface coatings and multifunctional wound dressings are also emphasized here. At last, we provide our perspectives on the development of clinically significant cationic antimicrobials and related challenges in the translation of these materials.

Optical clearing of tissues: Issues of antimicrobial phototherapy and drug delivery

This review presents principles and novelties in the field of tissue optical clearing (TOC) technology, as well as application for optical monitoring of drug delivery and effective antimicrobial phototherapy. TOC is based on altering the optical properties of tissue through the introduction of immersion optical cleaning agents (OCA), which impregnate the tissue of interest. We also analyze various methods and kinetics of delivery of photodynamic agents, nanoantibiotics and their mixtures with OCAs into the tissue depth in the context of antimicrobial and antifungal phototherapy. In vitro and in vivo studies of antimicrobial phototherapies, such as photodynamic, photothermal plasmonic and photocatalytic, are summarized, and the prospects of a new TOC technology for effective killing of pathogens are discussed.

Natural-Product-Based Solutions for Tropical Infectious Diseases

About half of the world's population and 80% of the world's biodiversity can be found in the tropics. Many diseases are specific to the tropics, with at least 41 diseases caused by endemic bacteria, viruses, parasites, and fungi. Such diseases are of increasing concern, as the geographic range of tropical diseases is expanding due to climate change, urbanization, change in agricultural practices, deforestation, and loss of biodiversity. While traditional medicines have been used for centuries in the treatment of tropical diseases, the active natural compounds within these medicines remain largely unknown. In this review, we describe infectious diseases specific to the tropics, including their causative pathogens, modes of transmission, recent major outbreaks, and geographic locations. We further review current treatments for these tropical diseases, carefully consider the biodiscovery potential of the tropical biome, and discuss a range of technologies being used for drug development from natural resources. We provide a list of natural products with antimicrobial activity, detailing the source organisms and their effectiveness as treatment. We discuss how technological advancements, such as next-generation sequencing, are driving high-throughput natural product screening pipelines to identify compounds with therapeutic properties. This review demonstrates the impact natural products from the vast tropical biome have in the treatment of tropical infectious diseases and how high-throughput technical capacity will accelerate this discovery process.

A Survey of Preclinical Studies Evaluating Nanoparticle-Based Vaccines Against Non-Viral Sexually Transmitted Infections

A worldwide estimate of over one million STIs are acquired daily and there is a desperate need for effective preventive as well as therapeutic measures to curtail this global health burden. Vaccines have been the most effective means for the control and potential eradication of infectious diseases; however, the development of vaccines against STIs has been a daunting task requiring extensive research for the development of safe and efficacious formulations. Nanoparticle-based vaccines represent a promising platform as they offer benefits such as targeted antigen presentation and delivery, co-localized antigen-adjuvant combinations for enhanced immunogenicity, and can be designed to be biologically inert. Here we discuss promising types of nanoparticles along with outcomes from nanoparticle-based vaccine preclinical studies against non-viral STIs including chlamydia, syphilis, gonorrhea, and recommendations for future nanoparticle-based vaccines against STIs.

Surface modification of nano-drug delivery systems for enhancing antibiotic delivery and activity

Rampant antimicrobial resistance calls for innovative strategies to effectively control bacterial infections, enhance antibacterial efficacy, minimize side effects, and protect existing antibiotics in the market. Therefore, to enhance the delivery of antibiotics and increase their bioavailability and accumulation at the site of infection, the surfaces of nano-drug delivery systems have been diversely modified. This strategy applies various covalent and non-covalent techniques to introduce specific coating materials that have been found to be effective against various sensitive and resistant microorganisms. In this review, we discuss the techniques of surface modification of nanocarriers loaded with antibacterial agents. Furthermore, saccharides, polymers, peptides, antibiotics, enzymes and cell membranes coatings that have been used for surface functionalization of nano-drug delivery systems are described, emphasizing current approaches for enhancing delivery, bioavailability, and efficacy of surface-modified antibacterial nanocarriers at infection sites. This article offers a critical overview of the potential of surface-modified antibacterial nanocarriers to overcome the limitations of conventional antibiotics in the treatment of bacterial infections. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Active biopackaging produced from by-products and waste from food and marine industries

The agro-food industry cannot today do without packaging to preserve and above all market its products. Plastic materials coming mainly from petrochemicals have taken a predominant place in the food packaging sector. They have become indispensable in many sectors, from fresh to frozen products, from meat and dairy products to fruit and vegetables or almost-ready meals. Plastics are cheap, their lightness reduces transport costs, and their convenience is fundamental for out-of-home catering. However, plastics pose serious end-of-life issues. The development of materials that are more respectful of the consumer and the environment has become a major issue. In addition, the agro-food industries generate significant quantities of waste or by-products that are poorly or not at all recovered. However, these contain constituents that can be extracted or transformed to be compatible with packaging uses. Many molecules from waste materials are of particular interest for the development of active packaging such as biopolymers, bioactive agents, inorganic compounds, fibers, or nano- and micro-objects. Providing bioactive functions such as antioxidants or antimicrobials can extend the shelf life of food while reducing the sophistication of plastic materials and thus improving their recycling. This article summarizes the main materials and constituents that can be recovered from waste and illustrates through several examples what could be the applications of such new, sustainable, and active packaging.

Crosslinking of Chitosan with Dialdehyde Chitosan as a New Approach for Biomedical Applications

Materials based on natural high molecular compounds are particularly interesting for biomedical applications. It is known that the cross-linking agent used for preparation of biomacromolecule-based materials is as important as used biopolymer. Therefore, natural cross-linkers containing reactive carbonyl groups are of great interest especially for modifying properties of natural polysaccharides. One of the most popular cross-linking agents is glutaraldehyde. Nevertheless, the unreacted particles can be released from the cross-linked material and cause cytotoxic effects. This can be eliminated when using a cross-linker based e.g., on polysaccharides. This article describes quick and efficient synthesis of dialdehyde chitosan (DACS) and its application for the preparation of chitosan films. Materials obtained with different amount of DACS were fully characterized in terms of structure and surface morphology. Thermal and mechanical properties as well as hydrophilic character were also examined. The results obtained were compared with the materials obtained by cross-linking chitosan with low molecular weight glutaraldehyde and high molecular weight cross-linking agent based on polysaccharide-dialdehyde starch. Toxicity of all obtained materials was tested using the Microtox® test. It has been shown that due to better mechanical, thermal and surface properties as well as lower toxicity, dialdehyde chitosan is a very promising crosslinking agent.

Advances in nanotechnology and antibacterial properties of biodegradable food packaging materials

A large number of non-biodegradable and non-renewable materials are produced daily for application as food packaging materials. These waste materials have a greatly negative effect on our health and the ecosystem. The idea of a bio-based economy is steadily gaining attention from the scientific, societal, and financial communities, so there are several areas in which the intended approaches can be improved for this reason. Therefore, creating biopolymer-based materials from natural sources, including polysaccharides and proteins, is a good alternative to non-renewable fossil resources. In the current review paper, we plan to summarize the major recent findings in food biodegradable packaging materials that include nanotechnology either directly or indirectly. Several natural nano-materials applied in food packaging applications such as polymers, polysaccharides, and protein-based nano-materials have been included in order to make special biopolymer hosts for nanocomposites. Finally, this review will highlight the antibacterial properties of commonly used nanoparticles or nanomaterials.

Data Analytics Approach for Rational Design of Nanomedicines with Programmable Drug Release

Drug delivery vehicles can improve the functional efficacy of existing antimicrobial therapies by improving biodistribution and targeting. A critical property of such nanomedicine formulations is their ability to control the release kinetics of their payloads. The combination of (and interactions among) polymer, drug, and nanoparticle properties gives rise to nonlinear behavioral relationships and large data space. These factors complicate both first-principles modeling and screening of nanomedicine formulations. Predictive analytics may offer a more efficient approach toward the rational design of nanomedicines by identifying key descriptors and correlating them to nanoparticle release behavior. In this work, antibiotic release kinetics data were generated from polyanhydride nanoparticle formulations with varying copolymer compositions, encapsulated drug type, and drug loading. Four antibiotics, doxycycline, rifampicin, chloramphenicol, and pyrazinamide, were used. Linear manifold learning methods were used to relate drug release properties with polymer, drug, and nanoparticle properties, and key descriptors were identified that are highly correlated with release properties. However, these linear methods could not predict release behavior. Nonlinear multivariate modeling based on graph theory was then used to deconvolute the governing relationships between these properties, and predictive models were generated to rapidly screen lead nanomedicine formulations with desirable release properties with minimal nanoparticle characterization. Release kinetics predictions of two drugs containing atoms not included in the model showed good agreement with experimental results, validating the model and indicating its potential to virtually explore new polymer and drug pairs not included in the training data set. The models were shown to be robust after the inclusion of these new formulations, in that the new inclusions did not significantly change model regression. This approach provides the first step toward the development of a framework that can be used to rationally design nanomedicine formulations by selecting the appropriate carrier for a drug payload to program desirable release kinetics.

Synthesis of chitosan biocomposites loaded with pyrrole-2-carboxylic acid and assessment of their antifungal activity against Aspergillus niger

A wide variety of chitosan (CS) biomaterials have been loaded with different antimicrobial agents to improve the activity of CS against phytopathogenic fungi. Recently, the antimicrobial activity of 1H-pyrrole-2-carboxylic acid (PCA) has been reported as a secondary metabolite of Streptomyces griseus, which was identified as the main bioactive compound in the biological control. However, it is sensitive to light and its activity against filamentous fungi has not yet been reported. The aim of the present research work was to evaluate the biological activity of CS-PCA biocomposites for the control of Aspergillus niger. CS-PCA biocomposites were obtained through nanoprecipitation. In vitro antifungal activity was determined by viability assay, spore germination, morphometric analysis of spores and hyphae, and the analysis of cellular components by fluorescence microscopy. CS-PCA showed an average size and Z potential of 502 ± 72 nm and + 54.7 ± 15 mV, respectively. Micrographs demonstrated well-distributed biocomposites with an apparently spherical shape. A new signal at 1473 cm^-1 in the FT-IR spectrum of the CS-PCA biocomposite was observed, confirming the presence of PCA in the composition of the CS-PCA nanosystem. CS-PCA biocomposites reduced the spores' viability by up to 58%. Effects on fungi morphometry, observed as an increase in the spores' average diameter, swelling, distortion, and an increase in the branching of hyphae, were observed. Fluorescence analysis showed oxidative stress and membrane and cell wall damage, mainly at early growth stages. The inhibitory effect against CS-resistant fungi, such as A. niger, opens a door for the control of CS-sensitive fungi.

Applications of cellulose and chitin/chitosan derivatives and composites as antibacterial materials: current state and perspectives

The bacterial infections have always a serious problem to public health. Scientists are developing new antibacterial materials to overcome this problem. Polysaccharides are promising biopolymers due to their diverse biological functions, low toxicity, and high biodegradability. Chitin and chitosan have antibacterial properties due to their cationic nature, while cellulose/bacterial cellulose does not possess any antibacterial activity. Moreover, the insolubility of chitin in common solvents, the poor solubility of chitosan in water, and the low mechanical properties of chitosan have restricted their biomedical applications. In order to solve these problems, chemical modifications such as quaternization, carboxymethylation, cationization, or surface modification of these polymers with different antimicrobial agents, including metal and metal oxide nanoparticles, are carried out to obtain new materials with improved physiochemical and biological properties. This mini review describes the recent progress in such derivatives and composites with potential antibacterial applications.

Characterization and Evaluation of Controlled Antimicrobial Release from Petrochemical (PU) and Biodegradable (PHB) Packaging

The academic exploration and technology design of active packaging are coherently supplying innovative approaches for enhancing the quality and safety of food, as well as prolonging their shelf-life. With the object of comparison between two barrier materials, such as stable petrochemical polyurethane (PU), (BASF), and biodegradable natural poly(3-hydroxybutyrate) (PHB), (Biomer Co., Krailling, Germany), the study of antibacterial agent release has been performed. For the characterization of polymer surface morphology and crystallinity, the scanning electron microscopy (SEM), atomic force microscopy (AFM) and differential scanning calorimetry (DSC) were used respectively. The antimicrobial activity of chlorhexidine digluconate (CHD) has been estimated by the Bauer⁻Kirby Disk Diffusion Test. It was shown that the kinetic release profiles of CHD, as the active agent, in both polymers, significantly differed due to the superposition of diffusion and surface degradation in poly(3-hydroxybutyrate) (PHB). To emphasize the special transport phenomena in polymer packaging, the diffusivity modeling was performed and the CHD diffusion coefficients for the plane films of PU and PHB were further compared. The benefit of active biodegradable packaging on the base of PHB is discussed.

Therapeutic applications of betulinic acid nanoformulations

Betulinic acid (BA), a naturally occurring plant-derived pentacyclic triterpenoid, has gained attention in recent years owing to its broad-spectrum biological and medicinal properties. Despite the pharmacological activity of BA, it has been associated with some drawbacks, such as poor aqueous solubility and short half-life in vivo, which limit therapeutic application. To solve these problems, much work in recent years has focused on enhancing BA's aqueous solubility, half-life, and efficacy by using nanoscale drug delivery systems. Several different kinds of nanoscale delivery systems-including polymeric nanoparticles, magnetic nanoparticles, liposomes, polymeric conjugates, nanoemulsions, cyclodextrin complexes, and carbon nanotubes-have been developed for the delivery of BA. Here, we focus on the recent developments of novel nanoformulations used to deliver BA in order to improve its efficacy.

Nanotechnology: An Untapped Resource for Food Packaging

Food commodities are packaged and hygienically transported to protect and preserve them from any un-acceptable alteration in quality, before reaching the end-consumer. Food packaging continues to evolve along-with the innovations in material science and technology, as well as in light of consumer's demand. Presently, the modern consumers of competitive economies demands for food with natural quality, assured safety, minimal processing, extended shelf-life and ready-to-eat concept. Innovative packaging systems, not only ascertains transit preservation and effective distribution, but also facilitates communication at the consumer levels. The technological advances in the domain of food packaging in twenty-first century are mainly chaired by nanotechnology, the science of nano-materials. Nanotechnology manipulates and creates nanometer scale materials, of commercial and scientific relevance. Introduction of nanotechnology in food packaging sector has significantly addressed the food quality, safety and stability concerns. Besides, nanotechnology based packaging intimate's consumers about the real time quality of food product. Additionally, nanotechnology has been explored for controlled release of preservatives/antimicrobials, extending the product shelf life within the package. The promising reports for nanotechnology interventions in food packaging have established this as an independent priority research area. Nanoparticles based food packages offer improved barrier and mechanical properties, along with food preservation and have gained welcoming response from market and end users. In contrary, recent advances and up-liftment in this area have raised various ethical, environmental and safety concerns. Policies and regulation regarding nanoparticles incorporation in food packaging are being reviewed. This review presents the existing knowledge, recent advances, concerns and future applications of nanotechnology in food packaging sector.