Erosion--diagnosis and risk factors

Impact of erosive and abrasive wear on the surface characteristics of hybrid ceramic-polymer dental materials

PURPOSE

To evaluate the surface characteristics of hybrid ceramic-polymer materials before and after exposure to erosive and abrasive media.

METHODS

Samples were prepared from Vita Enamic (VE), Cerasmart (CS), VarseoSmile Crown plus (VSC), and VarseoSmile Temp (VST). Surface roughness (SR), scanning electron microscopy (SEM), and surface hardness (SH) analyses were performed before (T0) and after exposing the samples to gastric juice (GJ), toothbrushing (TB), or both (GJ TB) for a simulated period of one (T1) or two years (T2).

RESULTS

At T0, VSC and VST showed higher average (Ra) and maximum (Rz) roughness values, more homogeneous surfaces in SEM micrographs, and lower Vickers numbers (HV) than VE and CS. At T1 and T2, samples showed higher Ra values, greater surface damage on SEM micrographs, and reduced HV. The most pronounced changes were evident for GJ TB samples, followed in order by GJ (within VE and CS) and TB samples (within VSC and VST).

CONCLUSION

VE and CS showed initially lower SR and higher SH, lower resistance to GJ, and higher resistance to TB than VSC and VST, which would be essential when fabricating restorations for patients who are particularly susceptible to dental erosion and abrasion.

Cement layer thickness and load-bearing capacity of tooth restored with lithium-disilicate glass ceramic and hybrid ceramic occlusal veneers

OBJECTIVES

To evaluate the influence of cement layer and veneer thickness on load-bearing capacity of tooth restored with hybrid ceramic (HC) and lithium-disilicate glass ceramic (LDGC) occlusal veneer restorations.

METHODS

Cement layer thickness was set at either 50 µm or 200 µm and tooth restored either with 0.5 mm or 1.8 mm thick HC Cerasmart270 (GC) or LDGC IPS e.max CAD (Ivoclar Vivadent) occlusal veneers. For this study, 64 extracted human molar teeth were selected and divided into 8 groups. Prepared teeth were scanned, and occlusal veneers were manufactured using CAD/CAM technology (Cerec, Dentsply-Sirona). Finished veneers were luted to preparations using self-adhesive resin cement (G-CEM ONE) according to manufacturers' instructions. Teeth were loaded quasi-statically and ultimate fracture loads were recorded. Fracture types were analyzed and classified visually. Statistical analysis was performed using two-way ANOVA.

RESULTS

With HC occlusal veneers, thickness of both veneer and cement layer had no significant influence on fracture load. The lowest mean ultimate fracture load value was found in 0.5 mm thick LDGC veneers group with 200 µm cement layer, which was significantly lower loading value compared with that of 1.8 mm thick LDGC veneers or any of HC veneers (p ≤ 0.0280). LDGC veneers with 0.5 mm thickness showed fractures within the veneer, whereas in other groups fractures of the tooth substance was also detected.

CONCLUSIONS

Within the limitations of this study, it can be concluded that thin HC occlusal veneers provided higher load-bearing capacity than LDGC counterparts of the same thickness. HC veneers were also less sensitive to the effect of cement layer thickness.

Identifying clusters of raters with a common notion of diagnosing erosive tooth wear: a step towards improving the accuracy of diagnostic procedures

BACKGROUND

Heterogeneous results are to be expected when multiple raters diagnose whether the dentine of a tooth with erosive tooth wear (ETW) is exposed or not. Identification of notions (fundamental concepts and understanding) about the diagnostic problem shared by groups of raters can be helpful to develop guidelines and to optimize teaching and calibration procedures. We aim to illustrate how clusters of raters with a common notion can be identified and how first insights about the notions can be obtained.

METHODS

This investigation is based on a former study in which 49 tooth surfaces affected by ETW were rated visually by 61 raters (23 scientists, 18 university dentists, 20 dental students) in terms of dentine exposed or not. The true status was determined histologically. Gender, age, professional experience, and specialization of the raters were documented. An algorithm was used to search for clusters of raters with high agreement in their ratings suggesting a common notion. The clusters identified were examined with respect to various aspects.

RESULTS

Four clusters of raters with high agreement could be found. The ratings of the raters in the cluster with the lowest diagnostic accuracy showed the highest correlation with the degree of tissue loss and the background tooth color, whereas the correlation with tissue loss was least in the cluster with highest diagnostic accuracy. The 15 raters of the latter cluster covered both students and dentists with or without specialization in erosion/cariology and/or long experience. This suggests that similar conceptual understanding of ETW can exist independent of professional experience.

CONCLUSIONS

The described methodology is useful to identify clusters of raters with a common notion about a specific diagnostic problem. The cluster-specific notions can be further examined based on existing study data or by group-based interviews of the raters of a cluster. This methodology allows investigators to learn more about useful or useless cues in diagnostic decision-making. This information can facilitate development or enhancement of guidelines on diagnostic decision-making.

A Pilot Investigation Into the Use of Teledentistry and Artificial Intelligence to Assess Dental Erosion in Competitive Swimmers

OBJECTIVE

The aim of the study was to assess the prevalence of dental erosion in competitive swimmers using teledentistry and artificial intelligence.

MATERIALS AND METHODS

An opportunistic sample of 20 competitive swimmers was recruited. The participants reported that they carried out an average of 2.40 h of training per day, 4.45 days per week. Data gathering was carried out remotely. The subjects completed a digital questionnaire and uploaded three photos of their mouth. Intraoral photographs were analyzed using the "Intact-Tooth" application to assess dental erosion. A statistical analysis was carried out to verify a possible correlation between the collected data.

RESULTS

The average calculated Basic Erosive Wear Examination (BEWE) index was 13.95, and 11 subjects (55%) had a severe BEWE (≥ 14). More than 40% of the participants disagreed about having social issues related to tooth hypersensitivity. Considering only subjects with a severe total BEWE value, we have observed an indirect correlation between the degree of dental erosion and diet (Pearson coefficient r = -0.57), whereas a direct correlation was observed between dental erosion and age (r = 0.493) and between BEWE and weekly training hours (r = 0.217).

CONCLUSIONS

Because of their lifestyle, competitive swimmers can be considered at a higher risk of developing dental erosion. In this context, teledentistry and AI tools can be effectively used to intercept those at the highest risk and prevent the occurrence of conditions.

SUMMARY

Dental erosion assessment in competitive swimmers using teledentistry and AI.

Bibliometric Analysis of Peer-Reviewed Literature on Erosive Tooth Wear From 1945 to 2023

Erosive tooth wear (ETW) is a prevalent oral condition with varying etiology, including erosion, abrasion, abfraction, and attrition. It is reported in the literature in different nomenclatures, hindering the ability to identify the emerging trends and influential scholarly works and bodies within this field. Using a bibliometric analysis approach, this study aims to evaluate the trends, themes, and productivity of the research on ETW condition while respecting its different terminologies. The Web of Science database was utilized to obtain the publication records on ETW to implement a retrospective bibliometric study. The data were retrieved on September 10, 2024, with the search terms "Dental erosion" OR "enamel erosion" OR "erosive tooth" OR "dental abrasion" OR "tooth abrasion" OR "toothbrush abrasion" OR "enamel abrasion" OR "non-carious cervical lesion" OR "non carious cervical lesion" OR "abfraction" OR "abfractions" OR "Tooth wear" OR "erosive tooth wear". We identified 6,069 records, and after applying inclusion/exclusion criteria, we removed 679, and the remaining 5,390 papers were considered for the analysis. The bibliometric indicators include types and accessibility modes, year of publications with citations, publishing sources, most contributing countries, institutions, authorship patterns, top authors, keywords, and the characteristics of the 15 most cited articles were examined. For the data analysis, Microsoft Excel (v.16; Microsoft® Corp., Redmond, WA), VOSviewer (v.1.6.10; https://www.vosviewer.com), and Statistical Product and Service Solutions (SPSS, v.27; IBM SPSS Statistics for Windows, Armonk, NY) software were utilized. The outcome illustrated that 5,390 papers on ETW were contributed by the authors of 127 countries and published in 1,112 journals between 1945 and 2023. The Journal of Dentistry published the most papers (n=290), while the European Journal of Oral Sciences had the most impactful papers (54.91 citations/paper). Authors from 3,904 institutions participated. The University of São Paulo became the most productive institution with 336 papers, while the University of Bristol's papers had the maximum citation impact (55.32 citations/paper). About 81.49% of the total authors had produced one paper each. The percentage of average authors for each paper was found to be 4.41, and David Bartlett was the most productive author. The most cited top 15 papers got an average of 297.26 citations per paper. About 77% of research on ETW was published in the last two decades. This bibliometric evaluation provides direction for future research and data regarding the present state of research on ETW.

Effect of Different Liquids and Thermal Aging Procedures on the Shear Bond Strength of APC II, APC Flash-Free, and Conventional Ceramic Brackets: An In Vitro Study

Objective

The purpose of this study was to compare the effects of cherry juice, coffee, coke, gastric acid, and the thermo-aging procedure (TAP) on the shear bond strength (SBS) of APC II, APC flash-free, and conventional ceramic brackets.

Methods

A total of 180 human premolar teeth were randomly divided into three major groups according to the type of ceramic bracket. Then, six subgroups (n=10) were established from each major group: Group 1: control; Group 2: only TAP; Group 3: 72 hours of cherry juice exposure + TAP; Group 4: 72 hours of coffee exposure + TAP; Group 5: 72 hours of coke exposure + TAP; and Group 6: 24 hours gastric acid exposure + TAP. SBS was assessed for each specimen using a universal test device, and the adhesive remnant index (ARI) was scored under a light microscope. Kruskal-Wallis and post-hoc Tamhane tests were used to analyze the data.

Results

Among the control groups, the highest SBS value belonged to conventional ceramic brackets (p<0.01). SBS values for all groups decreased as a result of each liquid and TAP. Gastric acid and coke had the greatest detrimental effects on SBS, while TAP had the least negative effects. The SBS values of APC II, APC flash-free, and conventional brackets were found to be statistically insignificant after different liquid exposures and TAP.

Conclusion

TAP and various fluids had a negative impact on the SBS value of ceramic brackets. SBS values, however, were still higher than clinically acceptable (8-9 MPa) values, even after exposure to gastric acid and coke.

Dental Erosion in Competitive Swimmers and Preventive Treatments: An In Vitro Study

The aim of this in vitro study was to evaluate the effectiveness of highly concentrated fluoride products and remineralizing products (F-APC) in preventing erosive dental lesions in competitive swimming patients. A total of 48 teeth were extracted, preserved in saline solution and divided into three groups. In G1 (control group), each tooth was half-immersed in chlorinated pool water; in G2 (fluoride-treated group), after being totally immersed in chlorinated water, each tooth had half of its surface treated with a highly concentrated fluoride product once a week; in G3 (remineralization product-treated group), each tooth was totally immersed in chlorinated water and half of its surface was treated with a remineralizing product after each immersion. The study was conducted over a 4-week period, immersing the teeth for 4 h per day. In G1, statistically significant differences were observed in submerged versus non-submerged tooth surfaces at week 3 (T3) (p = 0.019) and week 4 (T4) (p = 0.0007), with four and eight surfaces showing erosive tooth wear (ETW), respectively. In G2, a difference was observed between fluoride-treated and non-fluoride-treated surfaces at T4 (p = 0.039), with three surfaces with ETW among the non-treated ones. In G3, the difference was observed between portions treated with F-APC and those not treated at T4 (p = 0.019), with four surfaces with ETW among the untreated ones. Chlorinated pool water is a potential erosive agent for teeth if water pH values reach a critical value. Treating the teeth surface with highly concentrated fluoride products, once a week for 5 min, and F-APC are effective in protecting teeth against tooth erosion.

Evaluating the protective effects of mouthguards with neutralizing agents against chlorinated water-induced enamel erosion

Introduction

Dental erosion is a common problem among swimmers. This study evaluated the effects of mouthguard use with or without neutralizing agents, compared to no mouthguard use, on the microhardness of dental enamel after a swimming simulation.

Methods

Ninety-six human premolars were randomly allocated into six groups of 16 each: Group A (no mouthguard), Group B (mouthguard only), Group C (mouthguard with fluoride toothpaste), Group D (mouthguard with fluoride-free toothpaste), Group E (mouthguard with CPP-ACP), and Group F (mouthguard with arginine-fluoride toothpaste). Enamel slabs were fixed in a wax model (Typodont Articulator) and used to fabricate mouthguards for all groups except Group A. Each specimen underwent cyclic immersion: 2 h in acidic chlorinated water (pH 3.1) followed by 22 h in artificial saliva, for 28 days, to simulate swimming exposure. The change in enamel surface hardness was measured using a Vickers hardness tester. All groups underwent microhardness testing, scanning electron microscopy, and polarized light microscopy.

Results

The enamel hardness significantly decreased in all groups after the swimming simulation (paired t-test, P-values < 0.001), except for Group F, which used a mouthguard with arginine-fluoride toothpaste [mean reduction: 17.9 kg/mm2, 95% confidence interval (CI): -1.9, 37.7, P-value = 0.07]. Group A, without a mouthguard, exhibited the highest reduction in enamel surface hardness (mean: 190.6 kg/mm2; 95%CI: 177.4, 203.9), significantly differing from all other groups with mouthguards (P-values < 0.001). However, no statistically significant differences were observed in enamel hardness reduction among the mouthguard groups. SEM micrographs illustrated rough, irregular erosion patterns and several deep porous areas on enamel surfaces of Group A. In contrast, all mouthguard groups showed enamel surfaces similar to sound tooth surfaces. A polarized light microscopic study revealed the deepest dark areas on the enamel surface of Group A.

Conclusions

Mouthguards significantly reduced enamel microhardness loss compared to no mouthguard use. While no significant differences were found among mouthguard groups with or without neutralizing agents, those lined with arginine-fluoride toothpaste showed the least enamel loss, suggesting its potential protective effect. Within the limitations of this in vitro study, further clinical trials are needed to validate these results.

The erosive effect of pomegranate juice on enamel: An in vitro study

AIM

Dental erosion is a chemical-mechanical process that leads to the loss of dental hard tissues. This study aimed to investigate the effect of pomegranate juice on the enamel.

METHODS

Enamel blocks were randomly divided into three groups: deionized water, cola, and pomegranate juice. The blocks were immersed in the solutions four times a day for 14 days, and stored in artificial saliva for the remaining period. The surface hardness was measured on days 7 and 14. The surface structures of the demineralized blocks were observed via scanning electron microscopy (SEM), and the depth of demineralization was observed via confocal laser scanning microscopy (CLSM). The pH, calcium, and phosphorus levels of the three solutions were analyzed.

RESULTS

The microhardness values of the blocks in the pomegranate juice and cola groups decreased with the increase in the demineralization time. The blocks in the pomegranate juice group exhibited large fractures in the enamel column, whereas those in the cola group had pitted enamels with destruction of the interstitial enamel column. Compared with cola group, fluorescent penetration increased in pomegranate juice (P < 0.01). The pH of cola (2.32 ± 0.09) was lower than that of pomegranate juice (3.16 ± 0.16). Furthermore, the calcium content in pomegranate juice was significantly higher than that in cola (P < 0.01). Alternatively, the concentration of phosphorous in cola was significantly higher than that in pomegranate juice (P < 0.01).

CONCLUSION

These findings indicate that pomegranate juice can cause enamel demineralization with an erosive potential comparable to that of cola.

In Vitro Risk Assessment of Dental Acid Erosion Caused by Long-Term Exposure to Oral Liquid Bandages

Oral mucosa inflammation can cause severe pain and interfere with eating, reducing quality of life. However, few options for self-care are available. An oral liquid bandage forms a protective film over the affected area. We aimed to assess the acid erosion risk when a newly developed oral liquid bandage (ORAPLA) is accidentally deposited on teeth and to examine the relative acid erosion risk at multiple time points of the maximum recommended duration of continuous use. ORAPLA was applied to both enamel and dentin blocks from 45 bovine anterior mandibular teeth, and an acid challenge was performed in a simulated oral cavity with artificial saliva, with one exposure cycle lasting 6 h. The enamel showed substantial defects and a decrease in Vickers hardness after nine cycles, with no change in surface roughness. Dentin showed an increase in parenchymal defects and surface roughness and a trend toward decreased Vickers hardness with increasing exposure time. We found no significant acid corrosion in enamel after up to nine times the upper limit of normal use time or in dentin after up to six times the upper limit. We conclude that the acid erosion risk due to accidental attachment to teeth is low, and in the human oral cavity with salivary buffering and remineralization, likely even lower.

The changes on salivary flow rates, buffering capacity and chromogranin A levels in adults after bariatric surgery

OBJECTIVES

This study aimed to investigate changes in salivary flow rates, buffering capacity, and salivary chromogranin A (CHGA) levels in adults undergoing bariatric surgery (BS) compared with a non-obese control group.

MATERIALS AND METHODS

Salivary analyses were performed on 62 participants aged over 50 years, stratified into two groups matched for age and gender-individuals who had undergone bariatric surgery (BS) (n = 31) and a corresponding healthy control group (n = 31). Before saliva collection, participants completed a comprehensive 11-point visual numerical rating scale (NRS 0-10) xerostomia questionnaire, assessing subjective perceptions of two key aspects: dryness of the oral mucosa and resultant impact on oral functional ability. Three distinct saliva measurements were obtained: unstimulated whole saliva (UWS), stimulated whole saliva (SWS), and unstimulated upper labial saliva (ULS). The buffering capacity of unstimulated saliva was assessed using pH indicator strips, and concentrations of salivary Chromogranin A (CHGA) were quantified in stimulated saliva via enzyme-linked immunosorbent assay (ELISA).

RESULTS

After BS, more than 40% of BS group patients reported xerostomia, with 16.1% experiencing only mild symptoms without significant functional impact (p = 0.009). The prevalence of xerostomia and tongue dryness was higher in the BS group compared to the control group (p = 0.028 and p = 0.025, respectively). The comparative analysis unveiled no statistically significant differences in flow rates of unstimulated upper labial saliva (ULS), unstimulated whole saliva (UWS), and stimulated whole saliva (SWS) between the control group and patients who underwent bariatric surgery. However, in patients undergone BS with xerostomia, both ULS and UWS flow rates were significantly lower than in controls with xerostomia (p = 0.014 and p = 0.007, respectively). The buffering capacity was significantly lower in patients undergone BS than in controls (p = 0.009). No differences were found between groups regarding CHGA concentration and output values, nevertheless, higher values of CHGA concentrations were significantly correlated to lower flow rates.

CONCLUSION

According to the results, this study suggests that individuals undergoing BS may exhibit altered salivary buffering capacity and reduced unstimulated salivary flows in the presence of xerostomia. Additionally, the findings suggest that elevated concentration of salivary CHGA might be associated, in part, with salivary gland hypofunction.

CLINICAL RELEVANCE

The clinical significance of this study lies in highlighting the changes in salivary functions after BS. The identified salivary alterations might be attributed to adverse effects of BS such as vomiting, gastroesophageal reflux, and dehydration. Understanding these changes is crucial for healthcare professionals involved in the care of post-BS patients, as it sheds light on potential oral health challenges that may arise as a consequence of the surgical intervention. Monitoring and managing these salivary alterations can contribute to comprehensive patient care and enhance the overall postoperative experience for individuals undergoing BS.

Detection of Erosive Changes on Smooth Surfaces with and without Orthodontic Brackets Using an Intraoral Scanner-An In Vitro Study

BACKGROUND

Consumption of acidic beverages favours development of erosions. Modern diagnostic methods are required to detect erosions at an early stage. This study aimed to evaluate the suitability of an intraoral scanner (IOS) for detection of erosive changes on smooth surfaces adjacent to orthodontic brackets.

METHODS

Orthodontic metal brackets were attached to the buccal surfaces of 58 extracted permanent human teeth. Teeth were randomly divided into groups: A = 6% citric acid, B = Coca-Cola, C = Redbull, D = Powerade, E = Control, no acid exposure. Teeth were exposed to acid in three erosion cycles, followed by rinsing and brushing. Scans of teeth were performed at baseline and after each erosion cycle and enamel loss was measured. Quantitative light-induced fluorescence (QLF) measurements were performed as reference standard.

RESULTS

Significant substance loss was measured in all acid groups after the second and third erosion cycle (p < 0.0001). Correlation between scans and QLF were significant (p = 0.001).

CONCLUSIONS

With IOS, it was possible to detect and quantify enamel erosion at smooth surfaces with and without orthodontic brackets after a short exposure time. Considering the limitations of in vitro results, the use of IOS can be a promising digital tool to detect and monitor erosive enamel changes during fixed orthodontic treatment.

Association of salivary parameters and erosive tooth wear in preschool children

The aims of this study were to 1) assess the association between erosive tooth wear (ETW) according to the BEWE (Basic Erosive Wear Examination) scoring system and salivary parameters and 2) compare salivary parameters according to ETW severity in the subgroup of children with ETW. This cross-sectional study included 52 preschool children aged 5 years paired by sex. A calibrated examiner assessed ETW using BEWE criteria, and stimulated saliva was collected to determine salivary flow, osmolality, pH, and buffering capacity. The children were divided into two groups: without ETW (n=26; BEWE score 0) and with ETW (n=26; BEWE scores 1 and 2). Logistic regression analysis was used to determine the magnitude of the association between ETW and salivary parameters and estimates of odds ratios (OR). In the unadjusted analysis, the ETW group was more likely to have lower salivary flow (OR = 0.079; 95%CI = 0.013-0.469; p = 0.005) and lower osmolality (OR = 0.993; 95%CI = 0.985-1.000; p = 0.049). In the adjusted analysis, salivary flow remained significantly associated with ETW (OR = 0.087; 95%CI = 0.014-0.533; p = 0.008). Lower salivary osmolality values were observed in ETW, especially in preschool children with more severe ETW (BEWE score 2). Receiver operating characteristic (ROC) determined a salivary osmolality cutoff point of < 201 for the presence of ETW. In conclusion, salivary flow rate was significantly associated with ETW prevalence. Lower values of salivary osmolality were observed in preschool children with distinct erosive lesions with significant loss of tooth structure (BEWE 2).

Different vehicles containing CaneCPI-5 reduce erosive dentin wear in situ

OBJECTIVE

This study evaluated the protective capacity of a sugarcane-derived cystatin (CaneCPI-5) in different vehicles (1-solution and 2-chitosan gel) against erosive dentin wear in situ.

METHODS

In part-1, 15 volunteers participated in a crossover protocol (solutions): Water; Elmex™ and CaneCPI-5. The volunteers wore an appliance with 4 dentin samples for 5 days. These samples were treated with a drop of the solutions for 1 min (4X/d), then the acquired pellicle (AP) was formed and the samples were subjected to erosive challenges (EROSION: citric acid, for 90 s, 4X/day). 2X/day, half of the samples were also abraded for 15 s (ABRASION). In part-2, 16 volunteers participated in a crossover protocol (gel): No gel, Chitosan gel, Chitosan gel + NaF and Chitosan gel + CaneCPI-5. The volunteers also wore an appliance. The samples were treated once/day with the gel or not for 4 min, then the AP was formed and the samples were subjected to erosive and abrasive challenges, as reported in part-1. Dentin wear was measured by profilometry. Data were analyzed by two-way RM-ANOVA and Sidak's tests (p < 0.05).

RESULTS

Part-1: Elmex™ and CaneCPI-5 significantly reduced dentin loss in comparison with Water for the EROSION/ABRASION conditions (p < 0.05). Part-2, all the treated groups significantly reduced the dentin loss in comparison to the No gel. The greatest reduction was found for the gel + CaneCPI-5 group for the EROSION/ABRASION (p < 0.05).

CONCLUSION

The solution and chitosan gel containing CaneCPI-5 protected against erosive dentin wear in situ.

CLINICAL RELEVANCE

These different vehicles are probably sufficient for protecting people with high risk of developing erosive dentin wear.

Inhibition of Citric Acid-Induced Dentin Erosion by an Acidulated Phosphate Sodium Monofluorophosphate Solution

Sodium monofluorophosphate (Na2FPO3, MFP) is mainly used as an ingredient in fluoride-based dentifrices as it has a high safety profile, with one-third of the toxicity of sodium fluoride (NaF), as well as the ability to reach deep into the dentin. The purpose of this study was to assess the prevention of dentin erosion by MFP upon exposure to citric acid, which has a chelating effect, and to compare the effects to those of the conventional acidulated phosphate fluoride (APF) application method. Bovine dentin was used, and four groups were created: (i) APF (9000 ppmF, pH 3.6) 4 min group; (ii) acidulated phosphate MFP (AP-MFP, 9000 ppmF, pH 3.6) 4 min group; (iii) AP-MFP 2 min + APF 2 min (dual) group; and (iv) no fluoride application (control) group. Compared with the conventional APF application method, the application of AP-MFP was shown to significantly reduce substantial defects, mineral loss, and lesion depth; better maintain Vickers hardness; and promote the homogenous aggregation of fine CaF2 particles to seal the dentin tubules, enhancing acid resistance in their vicinity. The ΔZ value of the AP-MFP group was 2679 ± 290.2 vol% μm, significantly smaller than the APF group's 3806 ± 257.5 vol% μm (p < 0.01). Thus, AP-MFP-based fluoride application could effectively suppress citric acid-induced demineralization and could become a new, more powerful, and biologically safer professional-care method for preventing acid-induced dentin erosion than the conventional method.

Fully Automated Bioreactor-Based pH-Cycling System for Demineralization: A Comparative Study with a Conventional Method

This study aimed to develop an automated pH-cycling system using inexpensive commercial components that can replicate pH fluctuations in the oral cavity and salivary clearance to compare demineralization characteristics with the conventional method. The study found that the newly developed cycle-1 group showed improved demineralization properties, including apparent lesion depth, surface roughness, Vickers hardness, mineral loss, and depth of demineralization, compared to the control group. Additionally, the cycle-2 group, which had a longer cycle interval, showed further improvements in the demineralization properties. This system can replicate the differences in dental damage caused by differences in meals, snacking frequencies, and lifestyle rhythms, making it useful in cariology, preventive dentistry research, and oral care product development. It can be constructed using inexpensive commercial products, significantly reducing research costs and improving reproducibility and fairness between different experimental facilities. The system can replicate lifestyle rhythms, such as meals, sleep, and oral clearance by saliva, making it an in vitro pseudo-oral cavity.

Prevalence of Erosive Tooth Wear and Associated Dietary Factors among a Group of Finnish Adolescents

The aim of this study was to investigate the prevalence and severity of erosive tooth wear (ETW) among Finnish adolescents and to evaluate how frequency as well as amount of the use of erosive products is associated with ETW. The study population consisted of 328 voluntary, >15-year-old secondary school students (males 49.1%, females 50.9%) in three municipalities in Finland. Clinical examination to measure ETW (BEWE index) was carried out by trained and calibrated dentists. Piloted questionnaires included questions on consumption of drinks, fruits and berries, as well as tooth brushing frequency. Means and medians of frequencies and amounts of consumed erosive products were calculated and associations with ETW severity were analysed by logistic regression models. One-third (36.9%) of the participants were in need of at least preventive measures for ETW (BEWE sum score ≥3), but severe ETW (BEWE sum score >9) was rare (2.1%). Boys had severe ETW significantly more frequently than girls (p < 0.001). Habitual consumption of erosive drinks was common especially among boys compared to girls (p = 0.001). ETW was significantly associated with the amount of consumed erosive drinks, fruits, or berries. The prevalence of ETW among adolescences in Finland seems to be at the same level as in other Nordic and European countries. Consumption of erosive products is common and thus, the risk for tooth erosion is high, especially in boys. In addition to erosive drinks, also berries and fruits are associated with ETW and should be included in individual dietary counselling when early signs of ETW are clinically detected.

Hardness and surface roughness of differently processed denture base acrylic resins after immersion in simulated gastric acid

STATEMENT OF PROBLEM

The effect of gastric acid on the surface properties of denture base acrylic resin is unknown.

PURPOSE

The purpose of this in vitro study was to evaluate changes in the surface roughness and hardness of denture base acrylic resins after immersion in simulated gastric acid.

MATERIAL AND METHODS

Acrylic resin specimens (n=10) were prepared with 3 different processing techniques (compression-molded, injection-molded, and computer-aided design and computer-aided manufacturing [CAD-CAM] milled) and exposed to either gastric acid or artificial saliva (control). Surface roughness and hardness were measured at baseline (T0) and after 24-hour (T24) and 96-hour (T96) immersion in the solutions. The surface roughness and hardness data were analyzed by 3-way ANOVA and the Tukey HSD test (α=.05).

RESULTS

At T24, the greatest change in surface hardness was observed for compression-molded specimens in gastric acid (P<.05). At T96, changes in hardness values were higher in compression-molded specimens than those in milled specimens (P<.05). Regarding surface roughness, at T24, compression-molded and injection-molded specimens showed higher values than milled specimens in gastric acid (P<.05). Concerning specimens in artificial saliva, compression-molded specimens showed significantly higher changes in roughness than those of the others (P<.05). At T96, injection-molded specimens had the greatest roughness values (P<.05). Among specimens immersed in artificial saliva, milled specimens showed lower roughness values than the injection-molded or compression-molded specimens (P<.05).

CONCLUSIONS

Gastric acid exposure adversely affected the roughness and hardness of all the acrylic resins evaluated. CAD-CAM milled specimens showed better resistance to acid exposure after 24 and 96 hours in terms of roughness and hardness.

Development of a Paper-Based Analytical Method for the Colorimetric Determination of Calcium in Saliva Samples

A novel, rapid, and facile method for the colorimetric determination of calcium using micro-analytical paper-based devices (μ-PADs) was developed. The proposed analytical method utilizes the color differences developing, after the addition of calcium, on the surface of the devices because of the complexation reaction of calcium with Methylthymol Blue (MTB) at room temperature, in alkaline pH. The devices were manufactured with chromatographic paper, using wax barriers, and the analytical protocol was easily implemented without the need of any experimental apparatus except for a simple imaging device. The user must regulate the pH, add the solutions on the paper, and measure the color intensity of the formed Ca(II)-MTB complex with a flatbed scanner. The experimental conditions for optimum color development, the possible interfering substances, and the reliability of the paper devices in different preserving conditions were optimized, with satisfactory results. The method exhibited acceptable detection limits (2.9 mg L^-1) with sufficiently good precision, which varied from 4.2% (intra-day) to 6.4% (inter-day). Saliva samples from healthy volunteers were successfully analyzed, and the calcium levels were calculated in the range of 30.71 to 84.15 mg L^-1.

Assessment of demineralized tooth lesions using optical coherence tomography and other state-of-the-art technologies: a review

Tooth demineralization is one of the most common intraoral diseases, encompassing (1) caries caused by acid-producing bacteria and (2) erosion induced by acid of non-bacterial origin from intrinsic sources (e.g. stomach acid reflux) and extrinsic sources (e.g. carbonated drinks). Current clinical assessment based on visual-tactile examination and standardized scoring systems is insufficient for early detection. A combination of clinical examination and technology is therefore increasingly adapted. This paper reviews various procedures and technologies that have been invented to diagnose and assess the severity of tooth demineralization, with focus on optical coherence tomography (OCT). As a micron-resolution non-invasive 3D imaging modality, variants of OCT are now available, offering many advantages under different working principles for detailed analytical assessment of tooth demineralization. The roles, capabilities and impact of OCT against other state-of-the-art technologies in both clinical and research settings are described. (139 words).

Prevalence and risk factors of erosive tooth wear among young adults in the Singapore military

OBJECTIVES

Erosive tooth wear (ETW) is defined as the irreversible chemo-mechanical loss of dental hard tissues without plaque or bacteria and has been a growing phenomenon in the general population worldwide. The aim of this study was to determine the prevalence of ETW and the associated risk factors among young military personnel in Singapore.

MATERIALS AND METHODS

This cross-sectional study consisted of a questionnaire and clinical examination of military personnel between 18 and 25 years. The questionnaire collected information on demographics, medical and dental history, lifestyle and dietary habits. Tooth wear was clinically evaluated using the Basic Erosive Wear Examination (BEWE) index. The participants were profiled into four risk categories (none, low, moderate, severe) based on the sum score. Multivariable logistic regression analysis was performed to determine the risk factors associated with the presence of ETW.

RESULTS

Out of 1296 participants evaluated, 21.8% of them had ETW. The anterior sextants were more affected by erosion than posterior sextants for both arches. The risk factors significantly associated with ETW were GERD (OR = 2.83, p = 0.041), presence of self-reported TMD symptoms (OR = 2.51, p < 0.001), acidic food (OR = 2.03, p < 0.001) and drinks (OR = 3.07, p < 0.001), high caries risk (OR = 4.59, p < 0.001) and toothbrush stiffness (OR = 4.67, p < 0.001).

CONCLUSION

ETW is prevalent among the young military population, with over half of the population at a risk of ETW. Gastric reflux disease, TMD, acidic diet, dental caries susceptibility and the use of stiff toothbrushes were identified as significant risk factors.

CLINICAL RELEVANCE

A large proportion of young military personnel exhibited mild to moderate risk of ETW. Dental professionals can identify risk-susceptible individuals at a young age and educated them with preventive measures and dietary interventions to prevent the progression of the condition.

Evaluation of the Surface Roughness of Bulk-Fill Composite Resins after Submission to Acidic and Abrasive Aggressions

This in vitro study aimed to assess the erosive effect of hydrochloric acid in association with toothbrushing procedure on the surface condition of three bulk-fill composite resins used for direct restoration. A total of 480 samples (160 from each composite resin): X-tra Fil (VOCO, Germany)—group A, Filtek Bulk-fill Posterior (3M-ESPE, St. Paul, MN, USA)—group B, G-aenial Posterior (GC Japan)—group C were prepared, submitted to chemical attack for 60 min with hydrochloric acid 30% and, subsequently, submitted to the abrasive effect of toothbrushing using 10,000 cycles with medium and hard bristles, at three different times (immediately and after 30 min after acid attack or without any chemical attack). The surface roughness of the samples was measured using a noncontact profilometer (Dektak XT, Bruker, Billerica, MA, USA). The values were analyzed using ANOVA and post hoc Bonferroni tests, with a p < 0.05. Chemical attack for 60 min associated with one year of toothbrushing with toothbrushes having medium or hard bristles increase the surface roughness of tested bulk-fill composite resins. No differences were recorded between toothbrushing with medium or firm bristles immediately or 30 min after acidic challenge for each of the three bulk-fill composite resins. Exposure to hydrochloric acid determines no effect on surface roughness of bulk-fill composite resins.

Knowledge about caries and erosive tooth wear is confused among Norwegian high school students

OBJECTIVES

This study investigated differences in high school students' subjective and objective knowledge- and concerns about preventing caries and/or erosive tooth wear and the associations between these variables.

MATERIALS AND METHODS

A survey was conducted among students at 16 high schools in Norway. The survey included a range of fact-based questions to measure objective knowledge about caries and erosive tooth wear, as well as questions about students' perceptions of his/her own knowledge (subjective knowledge) and concerns about preventing the two conditions.

RESULTS

There were small differences in subjective knowledge about caries and erosive tooth wear among the 784 students who completed the survey (p < .01). However, students scored significantly higher on objective knowledge about caries (mean 2.99) than about erosive tooth wear (mean 1.45), p < .01, and seemed to confuse the two conditions. By contrast, students scored significantly worse on questions about beverages' potential to cause caries (mean 5.18) than to cause erosive tooth wear (mean 6.30), p < .001. Finally, objective knowledge about caries was positively associated with subjective knowledge about caries, but corresponding associations could not be found for erosive tooth wear.

CONCLUSIONS

Knowledge about caries and erosive tooth wear seemed to be confused among Norwegian high school students.

Three-year Follow-up of Conservative Direct Composite Veneers on Eroded Teeth

This clinical case describes an esthetic rehabilitation of a young patient presenting with erosive tooth wear. The etiological factors for the erosion in this clinical case was excessive carbonated beverages and lemon water intake. The patient's main complaint was the yellowish aspect of her smile. The treatment procedure selected was direct resin composite veneers in the six maxillary anterior teeth. A three-year follow-up of the case is presented. The three-year follow-up showed a successful clinical performance of the treatment procedure after a finishing/polishing protocol.

Restorative Materials Exposed to Acid Challenge: Influence of Temperature on In Vitro Weight Loss

Consumption of acidic beverages and foods could provoke erosive damage, both for teeth and for restorative materials. Temperatures of consumption could influence the erosive effects of these products. The aim of this in vitro study is to assess the influence of an acidic challenge on the weight loss of different restorative materials. Resin composites and glass-ionomer cements (GIC) were tested. The medium of storage was Coca-Cola (Coca-Cola, Coca-Cola Company, Milano, Italy) at two different temperatures, 4 and 37 °C, respectively for Group A and Group B. For each group, nine specimens were prepared for each material tested. After 7 days, weight was assessed for each sample, and the percentage weight loss was calculated. For all the resin composites (Groups 1−13), no significant weight losses were noticed. (<1%). Conversely, GICs (Groups 14 and 15) showed significant weight loss during the acidic challenge, which was reduced in the case of these materials that included a protective layer applied above. Significant differences were registered with intra-group analysis; weight loss for specimens immersed in Coca Cola at 37 °C was significantly higher for almost all materials tested when compared to specimens exposed to a cooler medium. In conclusion, all the resin composites showed reliable behaviour when exposed to acidic erosion, whereas glass-ionomer cements generally tended to solubilize.

Salivary phosphate as a biomarker for human diseases

Phosphate is a common ingredient of the daily consumed foods and is absorbed in the intestine and is excreted in the urine through the kidney to maintain the homeostatic balance. For adults, the Recommended Dietary Allowance (RDA) for phosphorus is around 700 mg/day. The change in dietary habits resulted in far more phosphate consumption (almost double) than the RDA, contributing to increased cardiovascular diseases, kidney diseases, and tumor formation. Due to a lack of clinical appreciation for the long-term consequences of chronic phosphate burden on non-communicable disorders, it is rapidly becoming a global health concern. The possible association between dysregulated phosphate metabolism and obesity is not studied in-depth, mainly because such an association is believed to be nonexistent. However, in the animal model of obesity, serum phosphate level was higher than their non-obese controls. In a similar observation line, significantly higher salivary phosphate levels were detected in obese children compared to normal-weight children. Of clinical importance, despite the significant increase of salivary phosphate levels in obese children, the plasma phosphate levels did not change in samples collected from the same group of children. Such disparity between plasma and saliva raised the possibility that human salivary phosphate levels may be an early biomarker of childhood obesity.

Regular Physical Activity and Dental Erosion: A Systematic Review

Dental erosion is the irreversible pathological loss of hard tissues, which are chemically dissolved by acids, especially through external means, such as diet (e.g., fruit juices, isotonic or energy drinks). This systematic review was designed to answer the question “Is there a relationship between dental erosion and regular physical activity with or without sports drink consumption?” Following the inclusion and exclusion criteria, sixteen studies were included in this systematic review (according to PRISMA statement guidelines). Based on the meta-analysis, physically active individuals who declared regular consumption of sports drinks had a more than 2.5-fold increase in the odds of erosive lesions. In general, nearly half of the people who practiced sports experienced tooth erosion, and more than half frequently consumed sports beverages. Despite the heterogeneity of the included studies (different age groups, various sports disciplines), regular physical activity was associated with an increased risk of dental erosion, especially under the influence of frequent consumption of sports drinks.

Oral Health and Liver Disease: Bidirectional Associations—A Narrative Review

Several links between chronic liver disease and oral health have been described and are discussed in this narrative review. Oral manifestations such as lichen planus, ulcers, xerostomia, erosion and tongue abnormalities seem to be particularly prevalent among patients with chronic liver disease. These may be causal, coincidental, secondary to therapeutic interventions, or attributable to other factors commonly observed in liver disease patients. In addition, findings from both experimental and epidemiological studies suggest that periodontitis can induce liver injury and contribute to the progression of chronic liver disease through periodontitis-induced systemic inflammation, endotoxemia, and gut dysbiosis with increased intestinal translocation. This has brought forward the hypothesis of an oral-gut-liver axis. Preliminary clinical intervention studies indicate that local periodontal treatments may lead to beneficial liver effects, but more human studies are needed to clarify if treatment of periodontitis truly can halt or reverse progression of liver disease and improve liver-related outcomes.

Influence of Enamel Exposure to Acidic Drink on Shear Bond Strength of Different Fissure Sealants

In the present study, we evaluated the influence of bovine enamel exposure to acidic drinks (Coca-Cola, Coca-Cola Company, Milano, Italy, pH = 2.37) on shear bond strength of three sealants (Fissurit; Grandio Seal and Admira Fusion-Voco Gmbh, Cuxhaven, Germany). For each sealant, two adhesive techniques were tested to investigate the impact of the adhesive application on shear bond strength of sealants after immersion in acidic drink and in the control: Group 1-Control: enamel surface was not in contact with acid drinks, acid etching application and self-adhesive technique for fissure sealant; Group 2-enamel surface was not in contact with acid drinks, acid etching, and adhesive applications, an etch-and-rinse technique for fissure sealant; Group 3-enamel surface was immersed in acid drink, acid etching application and self-adhesive technique for fissure sealant; Group 4-enamel surface was immersed in acid drink, acid etching, and adhesive applications, an etch-and-rinse technique for fissure sealant. For each specimen, the sealant composite resin was applied to the enamel surface and tested with a universal testing machine. Shear bond strength was measured in MPa and with an optical microscope to determine failure modes, quantified with adhesive remnant index (ARI). Enamel acidification variably influenced bond strength values of the different sealants. When no enamel pretreatment was applied, no significant differences were found among the sealants (p > 0.05). However, the mere application of acid etching without adhesive procedures resulted in lower bond strength (p < 0.001). The acid pretreatment affected significantly the bond strength of all sealants tested (p < 0.001), but no significant differences were recorded between the subgroups.

Risk Factors for Dental Erosion After Bariatric Surgery: A Patient Survey

Introduction

Treatment of obesity by bariatric surgery has increased in recent years. Reported side effects that may predispose to dental erosion include reflux, vomiting, and an increased frequency of intake of food and drink.

Objective

The aim was to investigate long-term dietary behaviour and experiences related to symptoms of dental erosion at least 5 years after bariatric surgery.

Methods

An online questionnaire study was conducted amongst 250 patients who had undergone bariatric surgery at King Saud Medical City in Saudi Arabia 5 years ago or more. It comprised 36 questions on demographic data, dietary habits, general health, dental health, and oral symptoms. The data were analysed using Chi-square and sign tests (significance level P < .05).

Results

A significant increase in acidic reflux and vomiting was found after bariatric surgery and appeared to increase with time after surgery. Also, a significant association between presence of acidic reflux and symptoms of dental erosion was found. However, 68.5% reported improved overall well-being after surgery. The response rate was 21.6% (most were female, aged 30-59 years). Respondents were generally not advised to visit a dentist in connection with bariatric surgery.

Conclusions

This long-term cross-sectional study suggests a time-dependent, increasing occurrence of vomiting and acidic reflux after bariatric surgery. Vomiting and reflux became even more common after 5 to 10 years. A significant relationship emerged between a high frequency of acidic reflux and a high frequency of oral symptoms related to dental erosion. Daily occurrence of general symptoms related to dumping syndrome were reported by the majority. However, in a 5- to 10-year perspective, general symptoms related to dumping syndrome and symptoms from dental erosion did not seem to detract from the respondents’ overall satisfaction with daily living. Oral health problems might be reduced if patients who had bariatric surgery were referred to a dentist for prevention and monitoring.

Knowledge on and treatment practices of erosive tooth wear among Finnish dentists

OBJECTIVES

To investigate Finnish dentists' knowledge on and means of recording, detecting and diagnosing erosive tooth wear (ETW). Treatment options and possible differences in treatment decisions between general and specialized dentists were also evaluated.

MATERIALS AND METHODS

An electronic questionnaire was sent by e-mail to 3664 Finnish dentists. Respondents' gender, age, work experience, field of specialty, and practice location were requested. The questionnaire also included a patient case where the dentists were asked about their choice of treatment. Statistical analyses were performed using means, proportions, and cross tabulations.

RESULTS

Response rate was 24% (n = 866). Almost all respondents (98.0%) recorded ETW in patient files, but only 4.1% used a detailed scoring system. Of the respondents, 64.4% usually found the cause of ETW. Use of carbonated beverages (84.3%), energy drinks (57.0%), and reflux disease (53.1%) were reported to be probable causes. The majority of the respondents (80.9%) usually assessed patient's dietary history while 1.9% evaluated saliva secretion rate. When asked about treatment decisions of ETW patients, the differences between general dentists and specialized dentists were not as obvious as hypothesized.

CONCLUSIONS

This study suggests that the Finnish dentists who participated in this survey are able to detect and/or diagnose erosive tooth wear, but there is variation in recording it. The differences in treatment decisions between general dentists and specialized dentists seem to be moderate. The treatment practices for ETW are not established and further research to create clinical guidelines seems to be needed.

Updates in association of gastroesophageal reflux disease and dental erosion: systematic review

Introduction: Dental erosion occurs by dissolving dental apatite when exposed to non-bacterial acids. One of the factors that predispose to dental erosion is gastroesophageal reflux disease (GERD) due to chronic regurgitation of gastric contents to the oropharynx. Thus, in addition to other extraesophageal symptoms, individuals with GERD may have erosive dental lesions.Areas covered: The objective of this systematic review was to evaluate the association and prevalence of erosive wear in patients with GERD. The bibliographic search was performed in the Pubmed and Web of Science databases, using the descriptors 'gastroesophageal reflux disease' AND 'dental erosion', considering clinical studies recently published from 2012 to 2020.Expert opinion: GERD can be considered a risk factor for the development of erosive dental lesions, whose prevalence was significantly higher in this group. However, several other factors can be commonly associated with the prevalence and severity of dental erosion among the world population, such as dietary habits, lifestyle, abrasion and bruxism. Thus, the prevalence and distribution of erosive lesions among healthy and GERD subjects varied widely among studies, which denotes the etiological complexity of dental erosion and reinforces the importance of careful and detailed anamnesis in order to establish an accurate diagnosis.

Effects of fluoridated tooth paste on medically erosive enamel in bonded primary teeth during maxillary arch expansion in cleft palate patient: An in vitro study

AIMS

This study searched the effects of fluoridated toothpaste on the enamel surface of deciduous molars eroded by different pediatric liquid medicaments which were encircled by orthodontic bands by gravimetric analysis method.

MATERIALS AND METHODS

A suitable orthodontic band was used to band each of the 110 non-carious exfoliated deciduous molars, and stored in artificial saliva. These teeth were divided randomly into fluoridated and non-fluoridated groups (50 teeth each), and 10 teeth were used as negative controls. The enamel surface of the fluoridated group was swabbed with fluoridated toothpaste for 5 minutes twice daily. Each group was subdivided into five clusters of 10 teeth each according to the type of medication used which included paracetamol, Adol, amoxicillin, Medazole (ME), and Viton (VI) according to a specific immersion cycle. The erosion induced in the enamel for all the teeth was evaluated by gravimetric analysis for different intervals.

RESULTS

The results showed that the weight loss increased with increasing exposure to liquid medication for all groups, but this increase was smaller in the fluoridated group. The highest mean weight loss after 28 days was in VI, and the lowest was in ME (0.145 [0.005] mg; 0.08 [0.008] mg), respectively.

CONCLUSION

The fluoridated toothpaste significantly reduced medically eroded enamel by oral medical syrups. The gravimetric method is valid for the detection of erosion on banded deciduous molars.

Atomic force microscopy analysis of the surface alterations of enamel, dentin, composite and ceramic materials exposed to low oral pH in GERD

Dental erosion is a significant topic in medical literature, both for gastroenterology and dental medicine. Dental structure loss has a psychosocial and functional significance. The pathogenesis of dental erosion in patients diagnosed with gastroesophageal reflux disease (GERD) characterized by the presence of an acidic oral environment after reflux episodes, is not well understood. The present study was designed to observe the effect of low oral pH in time on natural surfaces including enamel and dentine, but also on materials used in treating these dental destructions such as composites and ceramics. The acidic oral environment was estimated in relation to salivary pH. In the dental laboratory, 5-mm2 and 1-mm composite pieces of thick enamel, dentine, Emax Ceramic and Nexco Ivoclar were cut in order to be analyzed using atomic force microscopy (AFM) and to observe the surface alterations. Gastric acid was collected and mixed with saliva until a pH value of 6.0 was obtained, in which the pieces were immersed for 24, 120, 240 h. Roughness of each surface was calculated at a microstructure and nanostructure level. The results showed significant alterations in enamel and dentine exposed to a lower pH level beginning even at a short immersion time, in comparison with composites and ceramics which had no alterations. In conclusion, multidisciplinary attention should be given to detect and manage acidity of the oral cavity caused by GERD, in order to prevent dental erosion.

Diagnosis, risk assessment, and treatment decisions for tooth wear in daily practice: a case presentation survey among Belgian dentists

This survey assessed the use of current concepts for tooth wear diagnosis, risk assessment, and treatment decisions in daily practice, and identified factors of significance for treatment decisions. A total of 104 dentists were presented with 10 cases representing varying degrees of tooth wear. The dentists were asked to answer six questions pertaining to the diagnosis, risk assessment, and treatment of each case. A benchmark was established by three experts and the agreement between dentists and the benchmark was calculated. At dentition level, the agreement was moderate for diagnosis (κ = 0.55) and risk assessment (κ = 0.54). At tooth/surface level, the agreement for clinical and radiographic severity of wear was moderate (κ = 0.57) and substantial (κ = 0.65), respectively. The agreement for treatment decision was fair (κ = 0.35). Multivariate logistic regression analysis showed that treatment decisions for operative treatment were associated with moderate to high case risk (OR = 10.1; 95% CI: 5.4-18.9). Belgian dentists performed reasonably well in applying current concepts and strategies for tooth wear diagnosis and risk assessments at dentition level, as well as for assessment of wear severity at tooth/surface level. Improvement is warranted concerning treatment decisions. This survey could be a useful tool for disseminating and improving current knowledge of tooth wear, and for training dentists in daily practice.

Bioavailable gluconate chelated stannous fluoride toothpaste meta-analyses: Effects on dentine hypersensitivity and enamel erosion

OBJECTIVES

To compare the effect of bioavailable gluconate-chelated stannous fluoride (SnF₂) toothpaste with control toothpastes for treatment of dentine hypersensitivity (DH) and enamel erosion.

DATA AND SOURCES

A Procter & Gamble Oral Care archive of clinical studies was reviewed from 2000 to 2020. Eligible studies were Randomised Controlled Trials (RCTs) investigating bioavailable gluconate-chelated SnF₂ toothpaste efficacy compared to controls in adult participants measured following tactile (Yeaple force) and/or evaporative stimuli (Schiff score) in-vivo, duration <2 months (DH); or by erosive toothwear (profilometry) from in-situ samples, duration 10-15 days. Two authors independently assessed eligibility and resolved disagreements by discussion. A meta-analysis was undertaken and Risk of Bias (RoB) assessed using the Cochrane collaboration RoB tool for randomized parallel-group and cross-over trials.

RESULTS

Fourteen RCTs (1287 participants) assessed DH relief and Six RCTs (184 participants) enamel erosion protection. For DH SnF₂ toothpastes provided a 57 % (evaporative air) and 142 % (tactile) benefit versus negative controls (sodium fluoride/monofluorophosphate, 8 studies; p < 0.001). Compared to positive controls (potassium nitrate or arginine, 6 studies), a 22 % advantage (p = 0.036) was seen for evaporative air. In erosion studies, SnF₂ toothpastes provided an 83 % benefit versus control toothpastes (arginine or sodium fluoride; p < 0.001) with a change (95 %CI) in average surface profilometry level (μm) of -2.02(-2.85, -1.20).

CONCLUSIONS

The use of these bioavailable SnF₂ toothpastes, as part of a daily oral hygiene regimen, will provide patients with enamel erosion protection, combined with alleviation of DH pain when present, improving quality of life.

Nitrate-rich beetroot juice offsets salivary acidity following carbohydrate ingestion before and after endurance exercise in healthy male runners

There have been recent calls for strategies to improve oral health in athletes. High carbohydrate diets, exercise induced dehydration and transient perturbations to immune function combine to increase oral disease risk in this group. We tested whether a single dose of nitrate (NO₃^-) would offset the reduction in salivary pH following carbohydrate ingestion before and after an exercise bout designed to cause mild dehydration. Eleven trained male runners (V˙O2max 53 ± 9 ml∙kg^-1∙min^-1, age 30 ± 7 years) completed a randomised placebo-controlled study comprising four experimental trials. Participants ingested the following fluids one hour before each trial: (a) 140 ml of water (negative-control), (b) 140 ml of water (positive-control), (c) 140 ml of NO₃^- rich beetroot juice (~12.4 mmol NO₃^-) (NO₃^- trial) or (d) 140 ml NO₃^- depleted beetroot juice (placebo-trial). During the negative-control trial, participants ingested 795 ml of water in three equal aliquots: before, during, and after 90 min of submaximal running. In the other trials they received 795 ml of carbohydrate supplements in the same fashion. Venous blood was collected before and after the exercise bout and saliva was sampled before and repeatedly over the 20 min following carbohydrate or water ingestion. As expected, nitrite (NO₂^-) and NO₃^- were higher in plasma and saliva during the NO₃^- trial than all other trials (all P<0.001). Compared to the negative-control, salivary-pH was significantly reduced following the ingestion of carbohydrate in the positive-control and placebo trials (both P <0.05). Salivary-pH was similar between the negative-control and NO₃^- trials before and after exercise despite ingestion of carbohydrate in the NO₃^- trial (both P≥0.221). Ingesting NO₃^- attenuates the expected reduction in salivary-pH following carbohydrate supplements and exercise-induced dehydration. NO₃^- should be considered by athletes as a novel nutritional strategy to reduce the risk of developing acidity related oral health conditions.

Dentin erosion preventive effects of various plant extracts: An in vitro atomic force microscopy, scanning electron microscopy, and nanoindentation study

The overall consumption of acidic beverages has become more common, making the prevention and treatment of dental erosion an important consideration. The aim of this in vitro study was to evaluate the effect of various plant extracts in preventing dentin erosion. Seven experimental groups (fluoride-free water, fluoride-containing mouthwash [Colgate Plax], green tea, rosehip, clove, pomegranate, and grape seed) were formed, each consisting of 20 bovine dentin samples. The specimens were exposed daily to demineralization and remineralization cycles three times per day over 5 days through a 5-min plant extract application before each erosive episode. Surface roughness, nanohardness values, and morphological changes on dentin surfaces were examined using atomic force microscopy (AFM), nanoindentation, and scanning electron microscopy (SEM). The data were subjected to Kruskal-Wallis and Friedman tests (p < .05). There were statistically significant differences between the groups in terms of nanohardness values (p < .05), except for the pomegranate and grape seed groups. The highest nanohardness value was observed in the clove group (1.24 ± 0.34 GPa), whereas the lowest nanohardness value was noted in the grape seed group (0.20 ± 0.04 GPa). The nanohardness values of positive and negative control groups after erosion cycles were statistically higher than the initial nanohardness values (p < .05).There was no statistically significant difference between the groups in surface roughness values (p > .05). Macromolecular deposits were observed both in the SEM and AFM images of the pomegranate, Colgate, and rosehip groups. It can be concluded that the clove extract group is more successful in preventing dentin erosion than the other groups. Green tea is also effective in preventing dentin erosion, similar to clove extract. The application of plant extracts may be a new treatment strategy in preventing dentin erosion. Plant extracts may also reduce the severity of existing dentin erosion. Clove and green tea extracts may present novel natural therapy potential by inhibiting dentin erosion.

Salivary profile of children with erosive tooth wear: a transversal study

The aim of the present transversal study was to evaluate the clinical and biochemical salivary parameters of children with and without erosive tooth wear (ETW). The study population was children aged 4 to 9 years. A trained and calibrated examiner (kappa value for intraexaminer reliability = 0.89) classified the children into ETW (n = 24) and control groups (n = 24), and applied the O'Brien index. The salivary flow rate was initially evaluated by stimulated sialometry (paraffin chewing). Afterwards, the collected saliva was submitted to biochemical analyses of pH, uric acid, total buffering capacity, ferric-reducing antioxidant power, reduced glutathione, calcium, and phosphorus. Among the ETW children, 20 (83%) had dental lesions restricted to enamel, and 4 (17%) presented lesions affecting both enamel and dentin. A statistically significant difference between the groups was obtained only for the pH values (t-test; p = 0.004), with averages of 7.31 and 7.56 for the control and the ETW groups, respectively. Considering the parameters evaluated in general, it is suggested that the salivary profile of children with ETW does not differ considerably from that of children without ETW. However, the pH mean value seems to be slightly higher in ETW children, but is still within the normal physiological range.

Prevalence of sensitive teeth and associated factors: a multicentre, cross-sectional questionnaire survey in France

BACKGROUND

As far as we know, little data, whether obtained from self-administered questionnaires or upon dental clinical examination, has been published on the prevalence of sensitive teeth (ST) in the French adult population. The objectives of the present work were to estimate ST prevalence and characteristics in the general population of France and to explore the associated factors.

METHOD

A multicentre cross-sectional study was conducted between November 2011 and March 2013 in six French cities. Adult passers-by in public places were invited to answer an electronic questionnaire on a tablet computer. Only people who declared having at least one natural tooth were included in the study. A logistic regression model was used for the multivariate analysis.

RESULTS

The prevalence of ST during the previous 12 months reported by the sample of 2413 participants was 42.2% [95% CI: 40.2-44.1%]. The final logistic regression model showed significant statistical associations between ST and female gender, use of tobacco, consumption of soft drinks, limited access to oral care and poor oral hygiene habits (p < 0.05).

CONCLUSIONS

This study provides prevalence data on ST in a general population in France, which seems to remain high despite the existence of many therapies. It should alert professionals to a clinical manifestation that is becoming increasingly prevalent and that they will have to take into consideration to help reduce the discomfort arising from it.

Effect of gastric acids on surface topography and bending properties of esthetic coated nickel-titanium orthodontic archwires

OBJECTIVE

The purpose of this study was to evaluate the effect of simulated gastric acid solution on surface topography and bending properties of esthetic coated nickel-titanium (NiTi) archwires.

MATERIALS AND METHODS

Three brands of as-received white-coated superelastic NiTi upper archwires were used in this study: Dany, Perfect, and Nitanium. Uncoated metallic areas for each white-coated NiTi archwire were used for comparison with the coated areas. The specimens for each archwire were divided into two groups according to coating as follows: Group A, uncoated, and group B, coated. Then, each group was further subdivided into two subgroups according to the immersion medium as follows: Subgroup 1, immersed in artificial saliva, and subgroup 2, immersed in simulated gastric acid. Surface roughness, surface morphology, and three-point bending test were performed. The data were analyzed statistically using ANOVA and Tukey test.

RESULTS

The archwires immersed in simulated gastric acid solution showed significantly higher surface roughness and lower forces on loading and unloading than the archwires immersed in artificial saliva (P < 0.001). Perfect archwire showed significantly the highest surface roughness compared with Dany and Nitanium archwires (P < 0.001). The uncoated archwires showed higher loading and unloading forces compared with coated archwires for all groups (P < 0.001). Nitanium archwire showed the lowest loading and unloading forces at different deflections (P < 0.001).

CONCLUSIONS

The simulated gastric acid solution decreased considerably the amount of force applied at a given deflection. The loading-deflection and surface roughness properties of coated archwires were affected by the type of coating material.

CLINICAL RELEVANCE

The impact of gastric acids on surface and mechanical properties of orthodontic archwires depend on type of coating materials.

Effect of preparation design on the fracture behavior of ceramic occlusal veneers in maxillary premolars

OBJECTIVES

The fracture strengths of four types of occlusal veneers and a traditional full crown ceramic restoration and the influence of preparation design on the stress of restorations were examined.

METHODS

Forty intact maxillary premolars randomly divided into five groups were prepared based on the demands of type O (occlusal surface coverage), OF (occlusal and lingual surface coverage), POF (occlusal, lingual, and mesial surface coverage), and POFP (occlusal, lingual, mesial, and distal surface coverage) veneers and full crown, and then restored by glass ceramic. Specimens were subjected to fracture resistance tests after cyclic loading. The fracture strengths and modes were analyzed statistically. The level of significance was set at α = 0.05. One maxillary premolar was prepared for type O, OF, POF, POFP veneer and full crown, and then scanned to establish finite element models. The mean fracture load was applied vertically to calculate the maximum principal stress on the ceramic.

RESULTS

Type O veneer showed higher fracture strength than type POF and POFP veneers (P < 0.05). Both type O and OF veneers exhibited higher fracture strength than full crown (P < 0.05). No significant difference in failure mode was observed. The maximum principal stress for type O, OF, POF, POFP veneers, and full crown increased progressively and concentrated at the bonding surface directly beneath the loading area.

CONCLUSIONS

Four types of occlusal veneer showed fracture strengths that considerably exceeded normal biting forces. They represent conservative alternatives to full crowns and present a viable treatment for severely worn teeth.

CLINICAL SIGNIFICANCE

The occlusal veneers with different preparation designs, including type O, OF, POF and POFP veneers, show higher fracture resistances than traditional full coverage crowns that considerably exceed the normal biting forces. Therefore, these represent conservative alternatives to crown restorations and present a viable treatment for restoring severely worn teeth.

Knowledge of and attitudes towards erosive tooth wear among students of two Chinese universities

BACKGROUND

To assess the knowledge of and attitudes towards erosive tooth wear among dental, medical, and non-medical university students of two Chinese universities.

METHODS

A questionnaire containing 15 questions on knowledge of erosive tooth wear and 10 questions on attitudes towards erosive tooth wear was designed, and its psychometric properties (reliability and validity) were analysed in a pilot study (n = 120 students). The following 3 groups of university students (n = 635) were recruited based on a convenience sampling technique and were distributed the questionnaire via an online survey system: dental students (DSs), medical students (MSs), and non-medical students (NSs). Differences in the scores between groups and genders were analysed by one-way analysis of variance (ANOVA). The Pearson correlation coefficient was used to determine the association between the knowledge and attitude scores (P < 0.05).

RESULTS

The questionnaire was found to be reliable, valid and reproducible. A total of 435 students participated in this study (response rate: 69.6%). The knowledge score of the DSs (11.5 ± 3.4) was significantly higher than those of the NSs (5.5 ± 4.0) and MSs (6.1 ± 4.0) (P < 0.001). The attitude score of the DSs (45.2 ± 6.5) was significantly higher than those of the NSs (41.1 ± 6.9) and MSs (41.8 ± 6.4) (P < 0.001). The majority of DSs expressed attitudes that were more accurate and positive than those expressed by the other 2 groups. The attitude score was positively correlated with the knowledge score (r = 0.237, P < 0.001).

CONCLUSIONS

Dental students had more accurate knowledge of and more positive attitudes towards erosive tooth wear than medical and non-medical students. In this population, a positive correlation was established between knowledge of and attitudes towards erosive tooth wear.