Insights on the bioremediation technologies for pesticide-contaminated soils

Metabolic response of Zostera noltei transplants in a historically contaminated ecosystem

In the midst of the UN Decade on Ecosystem Restoration and newly approved EU Nature Restoration Law, ecosystem restoration efforts have gained momentum. Still, monitoring tools and early warning protocols to evaluate restoration success are necessary. This study aimed to assess the suitability of using biochemical response parameters to evaluate Z. noltei tolerance to transplantation and various abiotic conditions (including metal(loid) concentrations) across different tissues and seasons, following restoration. The results indicate that the proposed monitoring strategy successfully highlighted the adaptation and acclimation phase of transplanted plants, as well as the tolerance to the conditions at the Transplant site by activating mechanisms to mitigate or reduce oxidative stress. The findings validate the use of biochemical response parameters as a measure of transplant success and early warning signal for plant maladjustment in the scope of ecosystem restoration actions in historically contaminated areas.

Comparison of Soil Microbial Composition in Rhizospheres Between Wilt Disease-Resistant and Susceptible Melon Varieties

To screen out the bio-control soil microorganisms for preventing melon wilt, soil microbial compositions in rhizospheres between wilt-resistant and susceptible melon varieties were analyzed. The results showed that the soil fungal richness in rhizospheres of wilt-resistant melon varieties (MT) was significantly higher than that of wilt-susceptible melon varieties (MS). Additionally, in comparison with MS, soil bacterial compositions, such as Proteobacteria, Bacteroidota, Acidibacter, Streptomyces, etc., and the soil fungal compositions, such as Penicillium, Derxomyces, Aspergillus, and Talaromyces, enriched; also, Trichoderma, Gibellulopsis, and Pseudallescheria decreased in rhizospheres of wilt-resistant melon varieties (MT). Moreover, Mycothermus, Zopfiella, and Cladorrhinum were the unique soil-dominant fungal genera in rhizospheres of MT. All the above results suggested that the soil bacterial communities, such as Proteobacteria, Bacteroidota, Acidibacter, Streptomyces, etc., and the soil fungal communities, such as Penicillium, Derxomyces, Aspergillus, Talaromyces Mycothermus, Zopfiella, and Cladorrhinum, could be speculated as the potential soil bio-control microorganisms for preventing melon wilt.

Preparation, characterization, and pesticide adsorption capacity of chitosan-magnetic graphene oxide nanoparticles with toxicological studies

This study investigated magnetic graphene oxide nanoparticles (MGO-NPs) and functionalized with chitosan (CS-MGO-NPs) for removing florasulam, metalaxyl, and thiamethoxam pesticides from water. A comprehensive characterization employing Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), zeta potential measurements, XRD analysis, and surface area/porosity determinations confirmed the successful synthesis of the composites with the desired properties. Factorial experimental design was applied to identify the most significant factors of pesticide concentration, adsorbent amount, temperature, pH, agitation time, and ionic strength on the efficiency of removal of tested pesticides from water samples. CS-MGO-NPs exhibited superior removal efficiencies for all three pesticides compared to MGO-NPs. They achieved high removal rates for florasulam (average 92.94%) and metalaxyl (average 88.95%), while demonstrated moderate effectiveness against thiamethoxam (average 64.04%). Different kinetic and isotherm models described how well the nanoparticles adsorbed each pesticide. According to these models, the pseudo-first-order kinetic model interpreted well the adsorption of florasulam, and thiamethoxam onto CS-GO-NPs. While the pseudo-second-order kinetic model interpreted well the adsorption of metalaxyl. The Freundlich isotherm model gave the best fit with florasulam onto CS-GO-NPs. While the Langmuir isotherm model gave the best fit with metalaxyl and thiamethoxam. Finally, the toxicological studies of CS-MGO-NPs in rats were performed, and it was found negative effects at high doses, suggesting caution is needed for practical applications. Overall, this study shows promise for CS-MGO-NPs in water purification, but safety needs further investigation.

Rational design, synthesis, and antimicrobial evaluation of novel 1,2,4-trizaole-substituted 1,3,4-oxadiazole derivatives with a dual thioether moiety

In this paper, a series of novel 1,2,4-trizaole-substituted 1,3,4-oxadiazole derivatives with a dual thioether moiety were constructed. The synthetic compounds were characterized by 1H NMR, 13C NMR, HRMS, and single crystal diffraction. The antimicrobial activities of title compounds against fungi (Pyricutaria oryzae Cav., Phomopsis sp., Botryosphaeria dothidea, cucumber Botrytis cinerea, tobacco Botrytis cinerea, blueberry Botrytis cinerea) and bacteria (Xanthomonas oryzae pv. oryzicola, Xoc; Xanthomonas axonopodis pv. citri, Xac) revealed these compounds possessed excellent antibacterial activity through mycelial growth rate method and turbidity method, respectively. Among them, compounds 7a, 7d, 7g, 7k, 7l, and 7n had the antibacterial inhibition rate of 90.68, 97.86, 93.61, 97.70, 97.26, and 92.34%, respectively. The EC50 values of 7a, 7d, 7g, 7k, 7l, and 7n were 58.31, 48.76, 58.50, 40.11, 38.15, and 46.99 μg/mL, separately, superior to that of positive control pesticide thiodiazole copper (104.26 μg/mL). The molecular docking simulation of compound 7l and glutathione s-transferase also confirmed its good activity. The in vivo bioassay toward Xac infected citrus leaves was also performed to evaluate the potential of compounds as efficient antibacterial reagent. Further study of antibacterial mechanism was also carried out, including extracellular polysaccharide production, permeability of bacterial membrane, and scanning electron microscope observations. The excellent antibacterial activities of these compounds provided a strong support for its application for preventing and control plant diseases.

Transplantation of seagrass (Zostera noltei) as a potential nature-based solution for the restoration of historically contaminated mudflats

Within the UN Decade on Ecosystem Restoration (2021-2030) framework, a Nature-based Solution (NbS) using Zostera noltei transplants was tested to restore a historically contaminated intertidal area. In-situ transplantation relied on patches of seagrass and sediment from a Donor meadow and its evolution was monitored for two years. The evaluation of the transplant success encompassed the seagrass coverage area, seagrass biomass, tissue mercury (Hg) accumulation, and photosynthetic efficiency. The transplant was successful, with gradual increases in the coverage area in the target area indicating adaptation to local conditions already after the first year. Although some significant differences were observed in biomass and tissue Hg concentration over time, the similar translocation factors suggest the plant has effective defensive mechanisms to prevent accumulation and cellular damage. Additionally, the normal seasonal pattern of photosynthetic parameters indicates that contamination is not impeding its photosynthetic performance and growth, suggesting this NbS as a viable restoration strategy.

Pesticide Residues, Glyphosate Adsorption and Degradation Characteristics in Ethiopian Agricultural Soils

Background

The decline in wheat output in Ethiopia is widely attributed to pests, which has led to a rise in the usage of pesticides to boost productivity. The degree of pesticides sorption and degradation which influence the likelihood of environmental contamination from pesticides seeping into water bodies from soil has not yet been published for Ethiopian soils. The study aimed at to quantify the levels of pesticide residues, assess glyphosate's adsorption capabilities and degradation rate in the soils.

Materials and methods

QuEChERS method of extraction was employed to determine the concentration of the respective pesticides. The adsorption capacities of glyphosate in agricultural soils of Cheha and Dinsho districts were measured using batch adsorption techniques.

Results

Six pesticide residues were found in 12 soil samples at varied quantities. Glyphosate (24.00-219.31 µg kg-1), s-metolachlor (23.67-220.67 µg kg-1), chlorpyrifos (27.74 202.67 µg kg-1), pyroxulam (14.67-50.65 µg kg-1), florasulam (78.00-250.67 µg kg-1), malathion (15.00-49.67 µg kg-1). The experimental results showed that glyphosate was slightly sorbed at SD10 soil (18.91 μg-1-n mLn g-1) in comparison to SC1 soil (114.66 μg-1-n mLn g-1). Organic matter and clay content proving to be the principal factors influencing the process. According to adsorption experimental data, chemisorption is the major process in glyphosate adsorption, with the pseudo-second order kinetic model providing the best fit (R 2 = .99). The soils in the study area exhibit notable variations in glyphosate rate of degradation (0.0076-0.0221 week-1). The findings show that the main soil variables affecting the half-life (glyphosate degradation) were clay concentrations (R 2 = .48; P = .013), pH (R 2 = .55; P = .0055), Organic matter (R 2 = .74; P = .00027), Feox (R 2 = .50; P = .0105), and Alox (R 2 = .73; P = .00046).

Conclusion

The weak glyphosate adsorption capabilities of soils can be a good indicator that the pesticide residues in the soil are poised to endanger soil organisms and contaminate nearby water bodies through runoff and leaching.

Effect of fungicides on soil respiration, microbial community, and enzyme activity: A global meta-analysis (1975-2024)

Fungicides effectively prevent and control crop diseases caused by microorganisms; however, they also unintentionally affect soil microorganisms and enzyme activity. This study conducted a meta-analysis of 73 published studies to investigate the effects of fungicide application concentration and duration on soil respiration, microbial diversity, and enzyme activity. Increasing the concentration of fungicide application significantly reduced soil basal respiration and microbial carbon, with inhibitory effects reaching 1.45 % and 7.37 %, respectively, at 5 times the recommended application rate. The application of fungicides significantly reduced the activities of alkaline phosphatase, neutral phosphatase, acid phosphatase, dehydrogenase, and urease, with the activities of alkaline phosphatase and urease decreasing by 15.43 % and 7.76 %, respectively. Additionally, the application of fungicides significantly reduced fungi, actinomycetes, Shannon index, Simpson index, and McIntosh index while not affecting bacterial diversity. When the fungicide concentration is at 0-1 times, 1-5 times, and > 5 times, the number of fungi decreases by 14.53 %, 19.91 %, and 33.81 %, respectively. Temporally, soil basal respiration and microbial carbon significantly declined in the first 0-21d after fungicide application, but no such inhibitory effect was observed after 21d. Even 56 days after using the fungicide, it inhibited the activities of alkaline phosphatase and catalase by 13.14 % and 7.13 %, respectively. As time after the application of fungicides increases, the number of fungi decreases significantly, while the number of actinomycetes gradually recovers. Overall, fungicides inhibit the abundance, diversity, and enzyme activity of soil microorganisms; however, precise control of fungicide dosage is essential to minimize their toxic effects on soil.

Agro-waste based biomass residues valorization for effective adsorption of heavy metal

In this experiment four agro-waste based biomass residues (soybean stover-SSb, buckwheat stover-BWb, Artemisia vulgaris- AVb and Chromolaena odorata-COb) was valorized into low cost amendment called biochar followed by compositional characterization for their application in heavy metal removal. Investigation was carried out on the removal of the most common heavy metal ions including arsenic, cadmium, lead, nickel, zinc, and copper through adsorption on four types of biomass valorised biochar. According to preliminary testing, all the biochar was effective to eliminate a mixture of six heavy metals from the aqueous phase, with the removal of arsenic being the most removed and nickel being the least. In comparison to no biochar treatment, the average removal rate of heavy metal from aqueous solution using four distinct types of biochar was 45.75-62.42% (Cd), 43.64-56.33% (Pb), 41.85-59.73% (Ni), 42.87-60.28% (Zn), 45.64-59.51% (Cu), and 49.02-60.53% (As). The percent decrease of cadmium heavy metal adsorption with increase in maximum contaminant level (MCL) from 1- to fivefold was 20.0 (SSb), 20.7 (COb), 21.6 (BWb), and 22.9 (AVb). The results of the dosage study indicated that As adsorption was the most beneficial on all four types of biochar, whereas Ni adsorption was the least effective. With increase in application rate of biochar the heavy metals adsorption (%) was also increased. Four different agro-waste valorized biochar were used to treat the wastewater, and the physical and chemical changes that occurred both before and after the biochar treatment were noted. There was a drop in the wastewater CODT, CODD, TSS, ammonia, TKN, TP and pH values of 79.7-103.5%, 57.7-81.5, 52.3-68.4%, 1.23-2.23%, 14.1-20.6%, and 1.23-3.03%, respectively. Furthermore, after being passed through a biochar, the wastewater's Zn, Pb, Cd, As, Cr and Cu levels decreased by 3.26-6.15%, 0.06-0.34%, 0.01-0.08%, 2.37-3.65%, 3.95-5.53%, and 2.24-3.34%, respectively at 2.5 and 5.0 g/litre of wastewater. Thus, in order to comply with regulations for the disposal of wastewater effluent, the process of valorizing biomass into biochar offered enormous potential for the removal of heavy metals in addition to wastewater treatment.

Emerging technologies for the removal of pesticides from contaminated soils and their reuse in agriculture

Pesticides are becoming more prevalent in agriculture to protect crops and increase crop yields. However, nearly all pesticides used for this purpose reach non-target crops and remain as residues for extended periods. Contamination of soil by widespread pesticide use, as well as its toxicity to humans and other living organisms, is a global concern. This has prompted us to find solutions and develop alternative remediation technologies for sustainable management. This article reviews recent technological developments for remediating pesticides from contaminated soil, focusing on the following major points: (1) The application of various pesticide types and their properties, the sources of pesticides related to soil pollution, their transport and distribution, their fate, the impact on soil and human health, and the extrinsic and intrinsic factors that affect the remediation process are the main points of focus. (2) Sustainable pesticide degradation mechanisms and various emerging nano- and bioelectrochemical soil remediation technologies. (3) The feasible and long-term sustainable research and development approaches that are required for on-site pesticide removal from soils, as well as prospects for applying them directly in agricultural fields. In this critical analysis, we found that bioremediation technology has the potential for up to 90% pesticide removal from the soil. The complete removal of pesticides through a single biological treatment approach is still a challenging task; however, the combination of electrochemical oxidation and bioelectrochemical system approaches can achieve the complete removal of pesticides from soil. Further research is required to remove pesticides directly from soils in agricultural fields on a large-scale.

The role and mechanisms of microbes in dichlorodiphenyltrichloroethane (DDT) and its residues bioremediation

Environmental contamination with dichlorodiphenyltrichloroethane (DDT) has sever effects on the ecosystem worldwide. DDT is a recalcitrant synthetic chemical with high toxicity and lipophilicity. It is also bioaccumulated in the food chain and causes genotoxic, estrogenic, carcinogenic, and mutagenic effects on aquatic organisms and humans. Microbial remediation mechanism and its enzymes are very important for removing DDT from environment. DDT and its main residues dichlorodiphenyldichloroethylene (DDE) and dichlorodiphenyldichloroethane (DDD) can biodegrade slowly in soil and water. To enhance this process, a number of strategies are proposed, such as bio-attenuation, biostimulation, bioaugmentation and the manipulation of environmental conditions to enhance the activity of microbial enzymes. The addition of organic matter and flooding of the soil enhance DDT degradation. Microbial candidates for DDT remediation include micro-algae, fungi and bacteria. This review provide brief information and recommendation on microbial DDT remediation and its mechanisms.

Assessment of the Cu phytoremediation potential of Chrysanthemum indicum L. and Tagetes erecta L. using analysis of growth and physiological characteristics

In the current study, the Cu phytoremediation ability of two ornamental plants, Chrysanthemum indicum L. and Tagetes erecta L., was tracked concerning the growth and physiological responses. Plants were subjected to varying concentrations of Cu (0, 100, 200, and 400 mg/kg) under the pot experiment for 8 weeks. The results showed that the measured growth and physiological characteristics declined in T. erecta shoots and roots at all tested treatments compared with the control. However, in C. indicum at 100 mg/kg, shoot biomass, shoot total soluble protein, and leaves number remained equal to that of the control and then reduced by rising Cu concentrations, compared with the control. Also, results indicated that in C. indicum, after 56 days of exposure to Cu, the chlorophyll pigments content markedly increased and reached a maximum level at 100 mg/kg dose and gradually declined with enhancing Cu concentrations, compared with the control. Other measured growth and physiological parameters decreased in both tissues of C. indicum in response to Cu usage in the growth medium. The carotenoid content of T. erecta decreased in all studied Cu levels in comparison to the control, but in C. indicum remained unaffected up to 200 mg/kg Cu in comparison to the control and then enhanced with increasing Cu level. The augmentation of antioxidant enzyme activity in two species, especially in roots, reflected the incident of Cu stress as demonstrated by elevated MDA and ion leakage levels. Data concerning copper accumulation in tissues, TF, and BAF showed T. erecta is a weak Cu accumulator and seems not to be an appropriate candidate for Cu phytoremediation. However, the Cu content in shoots and roots of C. indicum increased significantly with an increment in applied Cu level. Also, C. indicum accumulated higher Cu concentrations in the roots than in shoots and exhibited TF < 1, 0.1 < BAF root < 1, and can be considered as a Cu excluder by the phytostabilization mechanism.

Restoration of degraded estuarine and marine ecosystems: A systematic review of rehabilitation methods in Europe

This article provides a comprehensive study of ecosystem rehabilitation methods widely used in the 21st century, focusing on Europe. The review covers the evolution and trends in scientific article publication, identification of European countries demonstrating high publication outputs, collaboration patterns, leading journals, and thematic areas. Additionally, it examines primary stressors in European aquatic ecosystems, and different methods and treatments commonly employed for remediation purposes. The analysis of selected articles revealed a significant increase in studies over time, driven by public awareness and financial incentives from national, European and global organizations. Italy, Portugal and Spain were the leading countries in degraded ecosystem rehabilitation studies, mainly focusing on remediating contaminated areas where metals were identified as the primary stressor (chemical pollution). Chemical remediation method emerged as the most used, closely followed by biological remediation method, which have gained prominence in recent years due to their ecological, economic, and social combined benefits. Furthermore, recent studies demonstrate a growing trend towards the combined use of more than one treatment/method to rehabilitate ecosystems, particularly with biological treatments. This combined approach has the potential for synergistic effects in achieving more effective rehabilitation and their sustainability in the long term, thus, a focus for future research.

Studies on photocatalytic mineralization of organic pesticides by bimetallic Cu-Zn nanoparticles derived from Zingiber officinale Roscoe (ginger) using green chemistry approach

Compared to monometallic nanoparticles, bimetallic nanoparticle synthesis and characterization have attracted more attention due to their superior environmental protection properties. In this study, we discuss the preparation and characterization of Cu-Zn bimetallic nanoparticles using Zinger extract, as well as their potential role in photocatalytic degradation of carbendazim, chlorpyrifos, monocrotophos, and cypermethrin. Surface properties were assessed with SEM and TEM, while UV-VIS, XRD, FTIR, and fluorescence spectroscopy were used to characterize the materials. It was observed that higher pH conditions were more conducive to the development of stable Cu-Zn BMNPs with diameters ranging from 60 to 100 nm. UV-VIS spectroscopy showed that the Cu-Zn bimetallic nanoparticles photodegraded 53-95% of the pesticides, monocrotophos, chlorpyrifos, and carbendazim during the 24-72-h incubation period. A number of pesticides may be photocatalytically degraded by primary reactive radicals produced by nanoparticles. We propose that the use of bimetallic nanoparticles could be one alternative strategy for pesticide mineralization.

A critical review of sustainable pesticide remediation in contaminated sites: Research challenges and mechanistic insights

Incidental pesticide application on farmlands can result in contamination of off-target biota, soil, groundwater, and surrounding ecosystems. To manage these pesticide contaminations sustainably, it is important to utilize advanced approaches to pesticide decontamination. This review assesses various innovative strategies applied for remediating pesticide-contaminated sites, including physical, chemical, biological, and nanoremediation. Integrated remediation approaches appear to be more effective than singular technologies. Bioremediation and chemical remediation are considered suitable and sustainable strategies for decontaminating contaminated soils. Furthermore, this study highlights key mechanisms underlying advanced pesticide remediation that have not been systematically studied. The transformation of applied pesticides into metabolites through various biotic and chemical triggering factors is well documented. Ex-situ and in-situ technologies are the two main categories employed for pesticide remediation. However, when selecting a remediation technique, it is important to consider factors such as application sites, cost-effectiveness, and specific purpose. In this review, the sustainability of existing pesticide remediation strategies is thoroughly analyzed as a pioneering effort. Additionally, the study summarizes research uncertainties and technical challenges associated with different remediation approaches. Lastly, specific recommendations and policy advocacy are suggested to enhance contemporary remediation approaches for cleaning up pesticide-contaminated sites.

Removal of organic and inorganic contaminants from the air, soil, and water by algae

Rapid increases in human populations and development has led to a significant exploitation of natural resources around the world. On the other hand, humans have come to terms with the consequences of their past mistakes and started to address current and future resource utilization challenges. Today's primary challenge is figuring out and implementing eco-friendly, inexpensive, and innovative solutions for conservation issues such as environmental pollution, carbon neutrality, and manufacturing effluent/wastewater treatment, along with xenobiotic contamination of the natural ecosystem. One of the most promising approaches to reduce the environmental contamination load is the utilization of algae for bioremediation. Owing to their significant biosorption capacity to deactivate hazardous chemicals, macro-/microalgae are among the primary microorganisms that can be utilized for phytoremediation as a safe method for curtailing environmental pollution. In recent years, the use of algae to overcome environmental problems has advanced technologically, such as through synthetic biology and high-throughput phenomics, which is increasing the likelihood of attaining sustainability. As the research progresses, there is a promise for a greener future and the preservation of healthy ecosystems by using algae. They might act as a valuable tool in creating new products.

Bioengineered microbial strains for detoxification of toxic environmental pollutants

Industrialization and other anthropogenic human activities pose significant environmental risks. As a result of the hazardous pollution, numerous living organisms may suffer from undesirable diseases in their separate habitats. Bioremediation, which removes hazardous compounds from the environment using microbes or their biologically active metabolites, is one of the most successful remediation approaches. According to the United Nations Environment Program (UNEP), deteriorating soil health negatively impacts food security and human health over time. Soil health restoration is critical right now. Microbes are widely known for their importance in cleaning up toxins present in the soil, such as heavy metals, pesticides, and hydrocarbons. However, the capacity of local bacteria to digest these pollutants is limited, and the process takes an extended time. Genetically modified organisms (GMOs), whose altered metabolic pathways promote the over-secretion of a variety of proteins favorable to the bioremediation process, can speed up the breakdown process. The need for remediation procedures, degrees of soil contamination, site circumstances, broad adoptions, and numerous possibilities occurring at various cleaning stages are all studied in detail. Massive efforts to restore contaminated soils have also resulted in severe issues. This review focuses on the enzymatic removal of hazardous pollutants from the environment, such as pesticides, heavy metals, dyes, and plastics. There are also in-depth assessments of present discoveries and future plans for efficient enzymatic degradation of hazardous pollutants.

Spatial-vertical variations of energetic compounds and microbial community response in soils from an ammunition demolition site in China

Ammunition-related activities have caused severe energetic compound (EC) contamination and pose serious risks to ecosystems. However, little is known regarding the spatial-vertical variations of ECs or their migration in soils at ammunition demolition sites. Although the toxic effect of some ECs to microorganisms have been reported through laboratory simulations, the responses of indigenous microbial communities to ammunition demolition activities are unclear. In this study, the spatial-vertical variations of ECs in 117 topsoil samples and three soil profiles from a typical ammunition demolition site in China were studied. Heavy contamination of ECs was concentrated in the top soils of the work platforms, and ECs were also detected in the surrounding area and nearby farmland. ECs showed different migration characteristics in the 0-100 cm soil layer of the different soil profiles. Demolition activities and surface runoff play critical roles in the spatial-vertical variations and migration of ECs. These findings suggest that ECs are able to migrate from the topsoil to the subsoil and from the core demolition area to further ecosystems. The work platforms exhibited lower microbial diversity and different microbiota compositions compared to the surrounding areas and farmlands. Using the random forest analysis, pH and 1,3,5-trinitrobenzene (TNB) were characterized as the most important factors affecting microbial diversity. Network analysis revealed that Desulfosporosinus was highly sensitive to ECs and may be a unique indicator of EC contamination. These findings provide key information in understanding EC migration characteristics in soils and the potential threats to indigenous soil microorganisms in ammunition demolition sites.

New insights into the bioremediation of petroleum contaminants: A systematic review

Petroleum product is an essential resource for energy, that has been exploited by wide range of industries and regular life. A carbonaceous contamination of marine and terrestrial environments caused by errant runoffs of consequential petroleum-derived contaminants. Additionally, petroleum hydrocarbons can have adverse effects on human health and global ecosystems and also have negative demographic consequences in petroleum industries. Key contaminants of petroleum products, primarily includes aliphatic hydrocarbons, benzene, toluene, ethylbenzene, and xylene (BTEX), polycyclic aromatic hydrocarbons (PAHs), resins, and asphaltenes. On environmental interaction, these pollutants result in ecotoxicity as well as human toxicity. Oxidative stress, mitochondrial damage, DNA mutations, and protein dysfunction are a few key causative mechanisms behind the toxic impacts. Henceforth, it becomes very evident to have certain remedial strategies which could help on eliminating these xenobiotics from the environment. This brings the efficacious application of bioremediation to remove or degrade pollutants from the ecosystems. In the recent scenario, extensive research and experimentation have been implemented towards bio-benign remediation of these petroleum-based pollutants, aiming to reduce the load of these toxic molecules in the environment. This review gives a detailed overview of petroleum pollutants, and their toxicity. Methods used for degrading them in the environment using microbes, periphytes, phyto-microbial interactions, genetically modified organisms, and nano-microbial remediation. All of these methods could have a significant impact on environmental management.

A review of the effects of environmental hazards on humans, their remediation for sustainable development, and risk assessment

In the race for economic development and prosperity, our earth is becoming more polluted with each passing day. Technological advances in agriculture and rapid industrialization have drastically polluted the two pillars of natural resources, land and water. Toxic chemicals and microbial contaminants/agents created by natural and anthropogenic activities are rapidly becoming environmental hazards (EH) with increased potential to affect the natural environment and human health. This review has attempted to describe the various agents (chemical, biological, and physical) responsible for environmental contamination, remediation methods, and risk assessment techniques (RA). The main focus is on finding ways to mitigate the harmful effects of EHs through the simultaneous application of remediation methods and RA for sustainable development. It is recommended to apply the combination of different remediation methods using RA techniques to promote recycling and reuse of different resources for sustainable development. The report advocates for the development of site-specific, farmer-driven, sequential, and plant-based remediation strategies along with policy support for effective decontamination. This review also focuses on the fact that the lack of knowledge about environmental health is directly related to public health risks and, therefore, focuses on promoting awareness of effective ways to reduce anthropological burden and pollution and on providing valuable data that can be used in environmental monitoring assessments and lead to sustainable development.

Degradation of four pesticides in five urban landscape soils: human and environmental health risk assessment

Pesticides are the most cost-effective means of pest control; however, the serious concern is about the non-target effects due to their extensive and intensive use in both agricultural and non-agricultural settings. The degradation rate constant (k) and half-life (DT₅₀) of four commonly used pesticides, glyphosate, 2,4-D, chlorothalonil and dimethoate were determined in five Australian urban landscape soils, with varying physicochemical characteristics, to assess their environmental and human health risks. The k values (day^-1) for the selected pesticides were inversely proportional to those of organic carbon (OC), silt, clay and Fe and Al oxides, and directly proportional to pH and sand content in soils. In contrast, the calculated values of DT₅₀ (days) of all the four pesticides in five soils positively correlated with OC, clay, silt and oxides of Fe and Al, whereas soil pH and sand content exhibited a negative correlation. The calculated values of environmental indices, GUS and LIX, for the selected pesticides indicate their potential portability into water bodies, affecting non-target organisms as well as food safety. The evaluation for human non-cancer risk of these pesticides, based on the calculated values of hazard quotient (HQ) and hazard index (HI), suggested that exposure of adults and children to soils, contaminated with 50% of initially applied concentrations, through ingestion, dermal and inhalation pathways might cause negligible to zero non-carcinogenic risks. The present data might help the stakeholders in applying recommended doses of pesticides in urban landscapes and regulatory bodies concerned in monitoring the overall environmental quality and implementing safeguard policies. Our study also clearly demonstrates the need for developing improved formulations and spraying technologies for pesticides to minimize human and environmental health risks.

Global Situation of Bioremediation of Leachate-Contaminated Soils by Treatment with Microorganisms: A Systematic Review

This systematic review presents the current state of research in the last five years on contaminants in soils, especially in leachates from solid waste landfills, with emphasis on biological remediation. In this work, the pollutants that can be treated by microorganisms and the results obtained worldwide were studied. All the data obtained were compiled, integrated, and analyzed by soil type, pollutant type, bacterial type, and the countries where these studies were carried out. This review provides reliable data on the contamination of soils worldwide, especially soils contaminated by leachate from municipal landfills. The extent of contamination, treatment objectives, site characteristics, cost, type of microorganisms to be used, and time must be considered when selecting a viable remediation strategy. The results of this study can help develop innovative and applicable methods for evaluating the overall contamination of soil with different contaminants and soil types. These findings can help develop innovative, applicable, and economically feasible methods for the sustainable management of contaminated soils, whether from landfill leachate or other soil types, to reduce or eliminate risk to the environment and human health, and to achieve greater greenery and functionality on the planet.

Effects of HPPD inhibitor herbicides on soybean root exudates: A combination study of multispectral technique and 2D-COS analysis

4-Hydroxyphenylpyruvate dioxygenase (HPPD) inhibitor herbicides are widely used in modern agriculture. Plant root exudates (REs) play an important role in the adsorption, degradation, migration and transformation of pesticides in soil. In the present study, the structural affinity and interaction mechanism between four HPPD inhibitors (HPPDi) and soybean REs were investigated via multispectral technologies and two-dimensional correlation analysis (2D-COS). UV-vis absorption and fluorescence spectra showed that mesotrione, tembotrione, sulcotrione and topramezone effectively quench the intrinsic fluorescence of soybean REs through static quenching. The binding constant K_a revealed that the binding ability of HPPDi to soybean REs takes the following order: mesotrione > tembotrione > sulcotrione > topramezone. According to the thermodynamic parameters, the main interaction force between tembotrione, sulcotrione, topramezone and soybean REs is electrostatic interaction, while the main interaction force is a hydrogen bond or van der Waals force between mesotrione and soybean REs. The conformational changes of REs were attributed to HPPDi by 3D spectral evaluation. FTIR spectroscopy and 2D-COS analysis suggested that soybean REs mainly formed stable complexes with HPPDi through functional groups such as carbonyl, carboxyl, methoxy and nitrate, and the first binding groups were carbonyl and carboxyl. These results provide helpful information for the adsorption and desorption process of environmental pollutants on the surface of plants and soil.

Effective Usage of Biochar and Microorganisms for the Removal of Heavy Metal Ions and Pesticides

The bioremediation of heavy metal ions and pesticides is both cost-effective and environmentally friendly. Microbial remediation is considered superior to conventional abiotic remediation processes, due to its cost-effectiveness, decrement of biological and chemical sludge, selectivity toward specific metal ions, and high removal efficiency in dilute effluents. Immobilization technology using biochar as a carrier is one important approach for advancing microbial remediation. This article provides an overview of biochar-based materials, including their design and production strategies, physicochemical properties, and applications as adsorbents and support for microorganisms. Microorganisms that can cope with the various heavy metal ions and/or pesticides that enter the environment are also outlined in this review. Pesticide and heavy metal bioremediation can be influenced by microbial activity, pollutant bioavailability, and environmental factors, such as pH and temperature. Furthermore, by elucidating the interaction mechanisms, this paper summarizes the microbe-mediated remediation of heavy metals and pesticides. In this review, we also compile and discuss those works focusing on the study of various bioremediation strategies utilizing biochar and microorganisms and how the immobilized bacteria on biochar contribute to the improvement of bioremediation strategies. There is also a summary of the sources and harmful effects of pesticides and heavy metals. Finally, based on the research described above, this study outlines the future scope of this field.

The status and natural impact of floriculture production in Ethiopia: a systematic review

Ethiopia's floriculture industry is exceedingly emerging, and, currently, it ranks as the sixth largest exporter of roses worldwide and second largest in Africa. Currently, many flowers, such as rose, gypsophila, carnations, and chrysanthemum, are growing. However, floriculture farms are contributing a high level of health risks and environmental problems in Ethiopia. Thus, the purpose of this paper is to scrutinize the status and impacts of floriculture industries in Ethiopia. The floriculture division is an emerging sector in Ethiopia, and the number of farms, income, job opportunities, and diversity of flowers are increasing. However, the health risks and environmental fates of the sector are also increasing. Ethiopian floriculture farms lack waste disposal technologies and workers' protective equipment and safety, and the chemicals, plastics, and corrugated irons used in the farms are carelessly disposed everywhere. Pesticides, plastics, and fertilizers are also freely discharged into water bodies and terrestrial land, which is causing the development of health risks; aquatic life hazards; and soil, water, and air pollution. However, Ethiopia has no strong and functional system or structure to control the impacts of floriculture farms. The government and the farm owners are not thoughtful about the environmental issues, health concerns, and socioeconomic impacts of the wastes. The government lacks regular control and assessment of farms, and the farms are engaging for their profit. Nevertheless, developed countries are currently using both natural and modern technologies to manage floricultural wastes. Ethiopia should therefore suggest manageable possible approaches and sound management strategies based on the findings of the analyses.

Conversion of fungicide cyprodinil to salts with organic acids: preparation, characterization, advantages

BACKGROUND

As an effective strategy to improve the basic properties of drugs, salt formation was less used in the field of pesticides than the medicine field. It is worth trying to improve the inherent shortcomings of cyprodinil (high K_ow values; polymorphism) in this way to enhance its practicality.

RESULTS

Eight cyprodinil salts (CYP-Salts) were prepared. The properties of CYP-Salts, including solubility in various solvents, polymorphic behavior, soil absorption, photolysis in aquatic water, in vitro fungicidal activity and curative activity, were assessed. It was observed that compared with those of cyprodinil, CYP-Salts had lower soil adsorption, while also having lower log K_ow values and could be more easily photodegraded in water. That is, CYP-Salts have lower impacts on water bodies and aquatic organisms than cyprodinil. Three CYP-Salts showed higher in vitro antifungal activities and curative activity. CYP-Salts have enhanced practicality, as they could avoid possible agglomeration caused by recrystallization.

CONCLUSION

Salt forming enhanced the properties of Cyprodinil in many aspects. CYP-Salts may potentially become a better substitute for cyprodinil. This study offers a more economical and effective strategy to prepare better alternatives to existing fungicides. © 2022 Society of Chemical Industry.

PGP-Bacterium Pseudomonas protegens Improves Bread Wheat Growth and Mitigates Herbicide and Drought Stress

The reaction of plants to simultaneous stress action and treatment with biological stimulants still remains poorly studied. Laboratory and field experiments have been conducted to study the growth and yield of bread wheat (Triticum aestivum L.) of the variety Ekada 113; stress markers and quantitative ratios of phytohormones in plants under insufficient soil moisture; the effects of spraying with herbicide containing 2,4-D and dicamba and growth-stimulating bacterium Pseudomonas protegens DA1.2; and combinations of these factors. Under water shortage conditions, spraying plants with Chistalan reduced their growth compared to non-sprayed plants, which was associated with inhibition of root growth and a decrease in the content of endogenous auxins in the plants. Under conditions of combined stress, the treatment of plants with the strain P. protegens DA1.2 increased the IAA/ABA ratio and prevented inhibition of root growth by auxin-like herbicide, ensuring water absorption by the roots as well as increased transpiration. As a result, the content of malondialdehyde oxidative stress marker was reduced. Bacterization improved the water balance of wheat plants under arid field conditions. The addition of bacterium P. protegens DA1.2 to the herbicide Chistalan increased relative water content in wheat leaves by 11% compared to plants treated with herbicide alone. Application of the bacterial strain P. protegens DA1.2 increased the amount of harvested grain from 2.0-2.2 t/ha to 3.2-3.6 t/ha. Thus, auxin-like herbicide Chistalan and auxin-producing bacterium P. protegens DA1.2 may affect the balance of phytohormones in different ways. This could be the potential reason for the improvement in wheat plants' growth during dry periods when the bacterium P. protegens DA1.2 is included in mixtures for weed control.

Insights into the recent advances in nano-bioremediation of pesticides from the contaminated soil

In the present scenario, the uncontrolled and irrational use of pesticides is affecting the environment, agriculture and livelihood worldwide. The excessive application of pesticides for better production of crops and to maintain sufficient food production is leading to cause many serious environmental issues such as soil pollution, water pollution and also affecting the food chain. The efficient management of pesticide use and remediation of pesticide-contaminated soil is one of the most significant challenges to overcome. The efficiency of the current methods of biodegradation of pesticides using different microbes and enzymes depends on the various physical and chemical conditions of the soil and they have certain limitations. Hence, a novel strategy is the need of the hour to safeguard the ecosystem from the serious environmental hazard. In recent years, the application of nanomaterials has drawn attention in many areas due to their unique properties of small size and increased surface area. Nanotechnology is considered to be a promising and effective technology in various bioremediation processes and provides many significant benefits for improving the environmental technologies using nanomaterials with efficient performance. The present article focuses on and discusses the role, application and importance of nano-bioremediation of pesticides and toxic pollutants to explore the potential of nanomaterials in the bioremediation of hazardous compounds from the environment.

Proteomic analysis of Burkholderia zhejiangensis CEIB S4-3 during the methyl parathion degradation process

Methyl parathion is an organophosphorus pesticide widely employed worldwide to control pests in agricultural and domestic environments. However, due to its intensive use, high toxicity, and environmental persistence, methyl parathion is recognized as an important ecosystem and human health threat, causing severe environmental pollution events and numerous human poisoning and deaths each year. Therefore, identifying and characterizing microorganisms capable of fully degrading methyl parathion and its degradation metabolites is a crucial environmental task for the bioremediation of pesticide-polluted sites. Burkholderia zhejiangensis CEIB S4-3 is a bacterial strain isolated from agricultural soils capable of immediately hydrolyzing methyl parathion at a concentration of 50 mg/L and degrading the 100% of the released p-nitrophenol in a 12-hour lapse when cultured in minimal salt medium. In this study, a comparative proteomic analysis was conducted in the presence and absence of methyl parathion to evaluate the biological mechanisms implicated in the methyl parathion biodegradation and resistance by the strain B. zhejiangensis CEIB S4-3. In each treatment, the changes in the protein expression patterns were evaluated at three sampling times, zero, three, and nine hours through the use of two-dimensional polyacrylamide gel electrophoresis (2D-PAGE), and the differentially expressed proteins were identified by mass spectrometry (MALDI-TOF). The proteomic analysis allowed the identification of 72 proteins with differential expression, 35 proteins in the absence of the pesticide, and 37 proteins in the experimental condition in the presence of methyl parathion. The identified proteins are involved in different metabolic processes such as the carbohydrate and amino acids metabolism, carbon metabolism and energy production, fatty acids β-oxidation, and the aromatic compounds catabolism, including enzymes of the both p-nitrophenol degradation pathways (Hydroquinone dioxygenase and Hydroxyquinol 1,2 dioxygenase), as well as the overexpression of proteins implicated in cellular damage defense mechanisms such as the response and protection of the oxidative stress, reactive oxygen species defense, detoxification of xenobiotics, and DNA repair processes. According to these data, B. zhejiangensis CEIB S4-3 overexpress different proteins related to aromatic compounds catabolism and with the p-nitrophenol  degradation pathways, the higher expression levels observed in the two subunits of the enzyme Hydroquinone dioxygenase, suggest a preferential use of the Hydroquinone metabolic pathway in the p-nitrophenol degradation process. Moreover the overexpression of several proteins implicated in the oxidative stress response, xenobiotics detoxification, and DNA damage repair reveals the mechanisms employed by B. zhejiangensis CEIB S4-3 to counteract the adverse effects caused by the methyl parathion and p-nitrophenol exposure.

Pesticides Xenobiotics in Soil Ecosystem and Their Remediation Approaches

Globally, the rapid rise in the human population has increased the crop production, resulting in increased pesticide xenobiotics. Despite the fact that pesticide xenobiotics toxify the soil environment and ecosystem, synthetic pesticides have increased agricultural yields and reduced disease vectors. Pesticide use has increased, resulting in an increase in environmental pollution. Various methods of controlling and eliminating these contaminants have been proposed to address this issue. Pesticide impurity in the climate presents a genuine danger to individuals and other oceanic and earthly life. If not controlled, the pollution can prompt difficult issues for the climate. Some viable and cost-effective alternative approaches are needed to maintain this emission level at a low level. Phytoremediation and microbial remediation are effective methods for removing acaricide scrapings from the atmosphere using plants and organisms. This review gives an overview of different types of xenobiotics, how they get into the environment, and how the remediation of pesticides has progressed. It focuses on simple procedures that can be used in many countries. In addition, we have talked about the benefits and drawbacks of natural remediation methods.

Nano-Enabled Products: Challenges and Opportunities for Sustainable Agriculture

Nanotechnology has gained popularity in recent years owing to its established potential for application and implementation in various sectors such as medical drugs, medicine, catalysis, energy, material, and plant science. Nanoparticles (NPs) are smaller in size (1-100 nm) with a larger surface area and have many fruitful applications. The extraordinary functions of NPs are utilized in sustainable agriculture due to nano-enabled products, e.g., nano-insecticides, nano-pesticides, and nano-fertilizers. Nanoparticles have lately been suggested as an alternate method for controlling plant pests such as insects, fungi, and weeds. Several NPs exhibit antimicrobial properties considered in food packaging processes; for example, Ag-NPs are commonly used for such purposes. Apart from their antimicrobial properties, NPs such as Si, Ag, Fe, Cu, Al, Zn, ZnO, TiO2, CeO2, Al2O3, and carbon nanotubes have also been demonstrated to have negative impacts on plant growth and development. This review examines the field-use of nano-enabled products in sustainable agriculture, future perspectives, and growing environmental concerns. The remarkable information on commercialized nano-enabled products used in the agriculture and allied sectors are also provided.